What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 138 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 138 of 446

5340-14-444-7000
Mounting Bracket

144447000
A-64-201-34-01: RNCC: 3 | RNVC: 2
89404933: RNCC: 5 | RNVC: 2

16 Jan 1991

5340-14-534-1000
Mounting Bracket

145341000
332A52-0135-2501: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-465-1836
Bridge Clamp

144651836
365P69-1328-00: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-368-5375
Loop Clamp

143685375
E4M703-60-02: RNCC: 3 | RNVC: 2
85-533-0631: RNCC: 6 | RNVC: 9

20 Feb 1981

5340-14-380-7291
Mending Plate

143807291
M397-02-54-16-01: RNCC: 3 | RNVC: 2
453-01142-000: RNCC: 3 | RNVC: 2

29 Nov 1982

5340-14-285-0807
Access Cover

142850807
262-10-61312-92: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-246-7774
Strap Hinge

142467774
NO PRIMARY REF14-246-7774: RNCC: 3 | RNVC: 2
39644: RNCC: 5 | RNVC: 9
062075548: RNCC: 5 | RNVC: 9
75548: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-314-3886
Webbing Strap

143143886
998-00-003: RNCC: 3 | RNVC: 2
3511 131 20481: RNCC: 5 | RNVC: 2
3511-131-20481: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-453-4213
Mounting Plate

144534213
NO PRIMARY REF14-453-4213: RNCC: 3 | RNVC: 2
431403: RNCC: 5 | RNVC: 2

19 Feb 1992

5340-14-485-6664
Mounting Plate

144856664
2135055-11: RNCC: 3 | RNVC: 2

6 Feb 1997

5340-14-389-4619
Mounting Plate

143894619
365A57-3288-20: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-458-1488
Casement Fastener

144581488
10700-06: RNCC: 3 | RNVC: 2
91718984: RNCC: 5 | RNVC: 2

8 Oct 1992

5340-14-527-2103
Mounting Bracket

145272103
A04604: RNCC: 3 | RNVC: 2
6500-25: RNCC: 5 | RNVC: 2
9563617680: RNCC: 5 | RNVC: 2

12 Oct 2001

5340-14-339-3015
Retaining Strap

143393015
95101823: RNCC: 3 | RNVC: 2
16-0010: RNCC: 5 | RNVC: 2

18 Jan 1977

5340-14-230-7293
Handwheel

142307293
GSM137-001F9-5N1: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-302-8884
Handwheel

143028884
NO PRIMARY REF14-302-8884: RNCC: 3 | RNVC: 2
23867DETL: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-489-4002
Swivel Caster

144894002
EP5BD200-40R: RNCC: 3 | RNVC: 2

16 Jul 1997

5340-14-526-4758
Pipe Hanger

145264758
78731-015-100: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-474-8247
Shimmy Damper

144748247
NO PRIMARY REF14-474-8247: RNCC: 3 | RNVC: 2
2510107900: RNCC: 5 | RNVC: 9

6 Mar 1995

5340-14-510-8948
Support Hook

145108948
NO PRIMARY REF14-510-8948: RNCC: 3 | RNVC: 2
1040329/F4972: RNCC: 5 | RNVC: 9

18 Nov 1998

5340-14-490-2846
Loop Clamp

144902846
J05085-04-0200P012: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-501-9439
Cover Strip

145019439
332A72-1255-20: RNCC: 3 | RNVC: 2

19 Nov 1997

5340-14-501-1665
Mounting Bracket

145011665
019-010-040: RNCC: 3 | RNVC: 2
019.010.040: RNCC: 3 | RNVC: 2
F300 0T 025 2067: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-341-5879
Retaining Strap

143415879
341A13-1027-20: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-464-3528
Push Door Plate

144643528
709065-00: RNCC: 3 | RNVC: 2
89297445: RNCC: 5 | RNVC: 2

28 Jul 1993

5340-14-377-4145
Angle Bracket

143774145
321A82-0022-20: RNCC: 3 | RNVC: 2
85-691-4933: RNCC: 6 | RNVC: 9

17 May 1982

5340-14-457-2044
Butt Hinge

144572044
JVBT102004-01: RNCC: 3 | RNVC: 2
5045574: RNCC: 5 | RNVC: 9

13 Aug 1992

5340-14-344-7865
Loop Clamp

143447865
55212-400BG: RNCC: 3 | RNVC: 2
85-689-0113: RNCC: 6 | RNVC: 9

9 Sep 1977

5340-14-367-8147
Retaining Strap

143678147
CT52-930-320: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-465-3009
Mounting Bracket

144653009
365A81-0390-02: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-296-3532
Angle Bracket

142963532
CAP10-20-09-012: RNCC: 3 | RNVC: 9

1 Jan 1973

5340-14-541-5235
Mounting Bracket

145415235
1091544-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-519-1894
Metal Grille

145191894
40P2011: RNCC: 3 | RNVC: 2
TDS20-545X969: RNCC: 3 | RNVC: 2

13 Mar 2000

5340-14-449-6747
Handwheel

144496747
MAT137-0017F11: RNCC: 3 | RNVC: 2

28 Aug 1991

5340-14-524-3895
Cover Strip

145243895
365A25-0028-1201: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-14-259-8947
Rod End Clevis

142598947
321A57-0486-20: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-291-4339
Mending Plate

142914339
121E23-755-19-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-285-8724
Access Cover

142858724
23030590: RNCC: 3 | RNVC: 2
23030590-3: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-543-3976
Filler Opening Cap

145433976
355A32-2124-00: RNCC: 3 | RNVC: 2

26 Oct 2004

5340-14-411-7038
Loop Clamp

144117038
DSU15440: RNCC: 3 | RNVC: 2
225-000-15440: RNCC: 5 | RNVC: 2
400015440: RNCC: 5 | RNVC: 2
14400254A: RNCC: 5 | RNVC: 2

27 Aug 1986

5340-14-302-5565
Angle Bracket

143025565
330A62-0433-20: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-453-6414
Access Cover

144536414
5-641-600: RNCC: 3 | RNVC: 2
5-641-600: RNCC: 5 | RNVC: 9

3 Mar 1992

5340-14-534-5623
Mounting Bracket

145345623
FA1R707-55M1: RNCC: 3 | RNVC: 2

26 Mar 2003

5340-14-413-1519
Access Cover

144131519
23115869-7: RNCC: 3 | RNVC: 2
23115869: RNCC: 5 | RNVC: 2

26 Nov 1986

5340-14-552-2513
Mounting Bracket

145522513
1216-141-000E: RNCC: 3 | RNVC: 2

6 Dec 2006

5340-14-217-2891
Loop Clamp

142172891
3130S73-71-630: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-462-8928
Plug Button

144628928
1 1-2 3S: RNCC: 3 | RNVC: 2
GD160-1 1-2 3S: RNCC: 5 | RNVC: 2

5 May 1993

5340-14-513-2025
Loop Clamp

145132025
4-901: RNCC: 3 | RNVC: 2

10 Mar 1999

5340-14-401-0917
Flush Catch Claw

144010917
606020: RNCC: 3 | RNVC: 2

29 May 1985

5340-14-476-3672
Strap Fastener Loop

144763672
HK15: RNCC: 3 | RNVC: 2

7 Jun 1995

5340-14-524-3439
Door Closer Dog

145243439
MF11213: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-14-515-3241
Eye Hook

145153241
3515200700: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-433-0301
Quick Release Pin

144330301
55691REVB: RNCC: 3 | RNVC: 2
55691: RNCC: 5 | RNVC: 2

5 Jul 1989

5340-14-361-6338
Pipe Hanger

143616338
000353: RNCC: 3 | RNVC: 2
53916-3: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-523-0799
Case Leg

145230799
46007934: RNCC: 3 | RNVC: 2
8023915G00: RNCC: 5 | RNVC: 2
46007934: RNCC: 5 | RNVC: 9

20 Dec 2000

5340-14-463-7545
Mounting Plate

144637545
DA2C204726121: RNCC: 3 | RNVC: 2

28 Jun 1993

5340-14-551-3566
Angle Bracket

145513566
RA1A702346393A1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-369-9393
Mounting Plate

143699393
1600-10-006: RNCC: 3 | RNVC: 2
160010006: RNCC: 5 | RNVC: 2

18 May 1981

5340-14-348-8822
Access Cover

143488822
300-663-902-0: RNCC: 3 | RNVC: 2
001145020A: RNCC: 5 | RNVC: 2
300-663-902P: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-351-2517
Rod End Clevis

143512517
7850000000: RNCC: 3 | RNVC: 2
3559-13: RNCC: 5 | RNVC: 2

10 Aug 1978

5340-14-273-5686
Loop Clamp

142735686
79431-696: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-490-2983
Access Cover

144902983
J05085-04-0100P002: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-293-8917
Bumper

142938917
EQDIV43-05-2: RNCC: 3 | RNVC: 2
EQDIV43-05REP2: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-264-1699
Loop Clamp

142641699
511119050201: RNCC: 3 | RNVC: 2
55219-320B237DB: RNCC: 5 | RNVC: 2
55219-320B237DB: RNCC: 5 | RNVC: 2
35P20: RNCC: 5 | RNVC: 2
A0021-35P20: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-530-9284
Bridge Clamp

145309284
PL/00/20/D/01/0: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-14-542-1287
Access Cover

145421287
5302835-30: RNCC: 3 | RNVC: 2

7 Jul 2004

5340-14-296-3677
Rod End Clevis

142963677
CAP10-50-61-19: RNCC: 3 | RNVC: 9

1 Jan 1973

5340-14-465-4987
Mounting Bracket

144654987
365A69-2042-00: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-406-8020
Snap Hook

144068020
905/80X8INOX: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-209-1076
Loop Clamp

142091076
511131050101: RNCC: 3 | RNVC: 2
55219-310B316DB: RNCC: 5 | RNVC: 2
A0021-35G10: RNCC: 5 | RNVC: 2
35G10: RNCC: 5 | RNVC: 2
2435G10: RNCC: 5 | RNVC: 2
35G10: RNCC: 5 | RNVC: 2
85-800-3921: RNCC: 6 | RNVC: 9

1 Jan 1964

5340-14-363-4979
Rim Lock Set

143634979
NO PRIMARY REF14-363-4979: RNCC: 3 | RNVC: 2
06600023FH001: RNCC: 5 | RNVC: 9

9 May 1980

5340-14-447-9517
Runner

144479517
NO PRIMARY REF14-447-9517: RNCC: 3 | RNVC: 2
82315: RNCC: 5 | RNVC: 9

10 Jun 1991

5340-14-501-0853
Lock Bolt

145010853
5302357-03 PS14-02: RNCC: 3 | RNVC: 2
5302357-03PS14-02: RNCC: 5 | RNVC: 2
F300 0T 025 1194: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-532-7943
Mounting Bracket

145327943
976-148122-03: RNCC: 3 | RNVC: 2

13 Dec 2002

5340-14-040-1543
Angle Bracket

140401543
NO PRIMARY REF14-040-1543: RNCC: 3 | RNVC: 2
707502: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-467-4498
Rod End Connector

144674498
312-03112-001: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-14-328-7131
Rod End Clevis

143287131
PAA15-05-024: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-489-6893
Access Cover

144896893
955120-202CPV: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-519-3163
Loop Clamp

145193163
215488-0: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-537-6167
Loop Clamp

145376167
LBG1.06/06PA: RNCC: 3 | RNVC: 2

12 Nov 2003

5340-14-488-2425
Retaining Strap

144882425
25658846: RNCC: 3 | RNVC: 2
2-565884-6: RNCC: 5 | RNVC: 2

23 Apr 1997

5340-14-421-2809
Bow Handle

144212809
2-484611: RNCC: 3 | RNVC: 9
2125100: RNCC: 5 | RNVC: 2

14 Jan 1988

5340-14-457-6404
Loop Clamp

144576404
75109-63: RNCC: 3 | RNVC: 2
CDM2-63: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-466-1803
Mounting Bracket

144661803
160609: RNCC: 3 | RNVC: 2
89169726: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-523-4922
Cover Strip

145234922
01-250-409: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-14-444-1657
Loop Clamp

144441657
PM1A606114202: RNCC: 3 | RNVC: 2
PM1A606114202: RNCC: 5 | RNVC: 2

18 Dec 1990

5340-14-513-5529
Spring Holder

145135529
272068: RNCC: 3 | RNVC: 2

24 Mar 1999

5340-14-508-1247
Door Hook

145081247
00132535: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-535-3912
Angle Bracket

145353912
5010306856: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-404-7238
Angle Bracket

144047238
39047399: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-212-0332
Detent Plunger

142120332
28015029-1: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-403-3275
Retaining Strap

144033275
219632: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-514-8510
Mounting Bracket

145148510
6136805: RNCC: 3 | RNVC: 2
22185T050103C: RNCC: 5 | RNVC: 2

22 Jun 1999

5340-14-505-7630
Bumper

145057630
MB2366F00: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-527-8029
Mounting Bracket

145278029
10605702: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-14-500-9552
Mounting Plate

145009552
D69202000000: RNCC: 3 | RNVC: 2
F300 0T 024 9764: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-455-8632
Mounting Bracket

144558632
1060184: RNCC: 3 | RNVC: 2
1060184: RNCC: 5 | RNVC: 9
5044647: RNCC: 5 | RNVC: 9

11 Jun 1992

5340-14-314-4158
Angle Bracket

143144158
0833047800: RNCC: 3 | RNVC: 2
0833047800: RNCC: 3 | RNVC: 2
0833047800: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-520-1494
Mounting Bracket

145201494
5000267086: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-382-4926
Loop Clamp

143824926
045S03-576098Y: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-280-3997
Mending Plate

142803997
82525: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-403-0616
Mending Plate

144030616
29737983: RNCC: 3 | RNVC: 2
29737983: RNCC: 5 | RNVC: 9

25 Jul 1985

5340-14-416-6881
Angle Bracket

144166881
413002020024: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-357-5381
Angle Bracket

143575381
A11A232252030: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-446-7451
Angle Bracket

144467451
39530719: RNCC: 3 | RNVC: 2
39530719: RNCC: 5 | RNVC: 9

9 Apr 1991

5340-14-439-1943
Mounting Bracket

144391943
16007304: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-545-4436
Angle Bracket

145454436
RA1M701556113N1: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-372-6415
Angle Bracket

143726415
2206-610A512: RNCC: 3 | RNVC: 2

21 Sep 1981

5340-14-402-7340
Lock-Release Lever

144027340
607405: RNCC: 3 | RNVC: 2

19 Jul 1985

5340-14-522-4550
Pipe Hanger

145224550
121E59-032-00-0: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-14-550-0119
Retaining Strap

145500119
EA6M702-33-885: RNCC: 3 | RNVC: 2

24 May 2006

5340-14-389-4579
Mending Plate

143894579
365A55-3111-05: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-452-1385
Tee Hinge

144521385
JVCIT02-01-04-08-00: RNCC: 3 | RNVC: 2
89470666: RNCC: 5 | RNVC: 2

18 Dec 1991

5340-14-312-5143
Loop Clamp

143125143
A10-76-940-07-1: RNCC: 3 | RNVC: 2
A10-76-940-07-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-502-5776
Mounting Bracket

145025776
186-10510-800: RNCC: 3 | RNVC: 2
5001824176: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-389-8532
Angle Bracket

143898532
M5BR882-006: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-362-1596
Access Cover

143621596
NO PRIMARY REF14-362-1596: RNCC: 3 | RNVC: 2
703531: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-14-247-3185
Lock Bolt

142473185
3160S25-25-250: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-217-9181
Cover Strip

142179181
3160S25-29-071: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-428-5891
Bumper

144285891
4601DMP104-0019: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-338-4515
Corner Brace

143384515
330A25-0851-21: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-473-8573
Mounting Bracket

144738573
332A76-1111-00: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-286-5155
Angle Bracket

142865155
341A24-1003-20: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-464-8875
Mounting Bracket

144648875
312-12711-001: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-461-4610
Mounting Plate

144614610
BC137A010-107: RNCC: 3 | RNVC: 9
1006621B00: RNCC: 5 | RNVC: 2

10 Mar 1993

5340-14-311-1186
Threaded Rod End

143111186
NO PRIMARY REF14-311-1186: RNCC: 3 | RNVC: 2
206HK2077: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-441-9453
Mounting Bracket

144419453
775141-06: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-440-6099
Access Cover

144406099
16-010-06-11: RNCC: 3 | RNVC: 2

18 Jul 1990

5340-14-287-7531
Compression Cup

142877531
208-1208: RNCC: 3 | RNVC: 9
RAS208-1208: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-396-0826
Clamping Catch

143960826
198698: RNCC: 3 | RNVC: 2
R182005-05: RNCC: 5 | RNVC: 2

27 Nov 1984

5340-14-324-1253
Handwheel

143241253
000MA1055F10REP1: RNCC: 3 | RNVC: 2
000MA060F17-2C1: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-421-7186
Synchro Clamp

144217186
8452-04: RNCC: 3 | RNVC: 2
002407260A: RNCC: 5 | RNVC: 2

27 Jan 1988

5340-14-512-5458
Section Block Clamp

145125458
F521-71-02: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-470-5435
Retaining Strap

144705435
EA5M701-28-883: RNCC: 3 | RNVC: 2

22 Jun 1994

5340-14-271-5124
Retaining Strap

142715124
FH146-120-02: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-440-3046
Access Cover

144403046
A64-201-07-02: RNCC: 3 | RNVC: 2
89404910: RNCC: 5 | RNVC: 2

11 Jul 1990

5340-14-465-1832
Pad Eye

144651832
365P69-1112-03: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-327-3082
Mending Plate

143273082
3160S81-10-514: RNCC: 3 | RNVC: 2
85-648-9350: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-375-9049
Quick Release Pin

143759049
NO PRIMARY REF14-375-9049: RNCC: 3 | RNVC: 2
404113605: RNCC: 5 | RNVC: 9
404113605: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-482-3126
Bow Handle

144823126
GN565-1-26-116SW: RNCC: 3 | RNVC: 2
GN565-1-26-116SW: RNCC: 3 | RNVC: 2
91812692: RNCC: 5 | RNVC: 2

4 Jul 1996

5340-14-510-8605
Access Cover

145108605
320-860-301-0: RNCC: 3 | RNVC: 2

18 Nov 1998

5340-14-315-2745
Turnbuckle Body

143152745
R126-07-8X90A56: RNCC: 2 | RNVC: 2
0023311501: RNCC: 3 | RNVC: 2
0023311501: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-242-3450
Angle Bracket

142423450
NO PRIMARY REF14-242-3450: RNCC: 3 | RNVC: 2
39609A: RNCC: 5 | RNVC: 9
062076204: RNCC: 5 | RNVC: 9
76204: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-502-9736
Section Block Clamp

145029736
307-817-604-0: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-444-9693
Lock Bolt

144449693
650A25-1250-02: RNCC: 3 | RNVC: 2

30 Jan 1991

5340-14-361-3088
Eye Hook

143613088
140A736: RNCC: 3 | RNVC: 9

24 Jan 1980

5340-14-457-3735
Retaining Bail

144573735
W111B3-2,5: RNCC: 3 | RNVC: 2

27 Aug 1992

5340-14-383-5061
Angle Bracket

143835061
20068764: RNCC: 3 | RNVC: 2
20068764: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-482-2261
Mounting Bracket

144822261
51533-999-1: RNCC: 3 | RNVC: 2
51533-999-1: RNCC: 5 | RNVC: 9

27 Jun 1996

5340-14-517-1185
Runner

145171185
8628.DA.080.NI.016: RNCC: 3 | RNVC: 2
6677908CREP54: RNCC: 5 | RNVC: 2

10 Nov 1999

5340-14-524-3068
Mounting Bracket

145243068
DLT114467: RNCC: 3 | RNVC: 2

12 Mar 2001

5340-14-211-1251
Retaining Strap

142111251
22897: RNCC: 3 | RNVC: 2
22897: RNCC: 6 | RNVC: 9

1 Jan 1964

5340-14-332-1641
Access Cover

143321641
3-7745: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-435-2625
Expansion Shield

144352625
02300030065: RNCC: 3 | RNVC: 2
91532892: RNCC: 5 | RNVC: 2

2 Nov 1989

5340-14-478-0848
Webbing Strap

144780848
038479B: RNCC: 3 | RNVC: 2
FYFC20X275X2,3: RNCC: 5 | RNVC: 2

11 Oct 1995

5340-14-417-0848
Cushioning Pad

144170848
534596: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-14-466-3965
Loop Clamp

144663965
3-22609-01-50A: RNCC: 3 | RNVC: 2
3-22609-01-50A: RNCC: 5 | RNVC: 2

3 Nov 1993

5340-14-335-7666
Rod End Connector

143357666
160-88982-03: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-297-3129
Retaining Strap

142973129
501-709-259-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-503-7330
Pawl Fastener

145037330
1107-U124: RNCC: 3 | RNVC: 2
CAE01590: RNCC: 5 | RNVC: 2
1107U124: RNCC: 5 | RNVC: 2

28 Jan 1998

5340-14-509-6842
Loop Clamp

145096842
3-22609-12-16A: RNCC: 3 | RNVC: 2
3-22609-12-16A: RNCC: 5 | RNVC: 2

28 Oct 1998

5340-14-378-0468
Bumper

143780468
NO PRIMARY REF14-378-0468: RNCC: 3 | RNVC: 2
53440980: RNCC: 5 | RNVC: 9

20 Jul 1982

5340-14-331-5999
Retaining Strap

143315999
J00650-01-0400P033: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-472-3017
Mounting Bracket

144723017
312-16246-001: RNCC: 3 | RNVC: 2

19 Oct 1994

5340-14-529-6832
Bumper

145296832
3511-192-03081: RNCC: 3 | RNVC: 2

4 Apr 2002

5340-14-420-2198
Loop Clamp

144202198
350A91-0018-13: RNCC: 3 | RNVC: 2

25 Nov 1987

5340-14-449-8277
Retaining Band

144498277
993-02-04: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-14-386-3156
Rigid Caster

143863156
911309-11: RNCC: 3 | RNVC: 2
91130911: RNCC: 5 | RNVC: 2

24 Aug 1983

5340-14-459-6671
Arched Cushion

144596671
MAT169-0012F19DE35: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-14-371-3064
Bow Handle

143713064
869024008: RNCC: 3 | RNVC: 2
8690-24008: RNCC: 5 | RNVC: 2
8690-24008: RNCC: 5 | RNVC: 9
869024008: RNCC: 5 | RNVC: 9

5 Aug 1981

5340-14-532-3302
Mounting Plate

145323302
3185-315A509: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-440-3056
Mounting Bracket

144403056
3511-190-36141: RNCC: 3 | RNVC: 2
89288145: RNCC: 5 | RNVC: 2

11 Jul 1990

5340-14-509-8624
Access Cover

145098624
116-75-1452: RNCC: 3 | RNVC: 2
1560AA1061406: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-387-0762
Control Rod

143870762
14-25-23: RNCC: 3 | RNVC: 9

24 Aug 1983

5340-14-520-2238
Lock Bolt

145202238
AE5-70: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-525-5624
Access Cover

145255624
C04/2053A: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-339-5830
Bridge Clamp

143395830
3130S85-31-001: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-360-6736
Retaining Strap

143606736
6413-07066: RNCC: 3 | RNVC: 2
6413-07066-13: RNCC: 5 | RNVC: 2

19 Dec 1979

5340-14-396-1298
Angle Bracket

143961298
NO PRIMARY REF14-396-1298: RNCC: 3 | RNVC: 2
IMS1000M: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-389-9386
Retaining Strap

143899386
4-000011-000042: RNCC: 3 | RNVC: 2
4-011-0042: RNCC: 5 | RNVC: 2

26 Jan 1984

5340-14-548-5199
Loop Clamp

145485199
860700-4: RNCC: 3 | RNVC: 2
860700: RNCC: 3 | RNVC: 2

24 Jan 2006

5340-14-303-5758
Retaining Strap

143035758
C57434-10: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-397-2872
Clamping Catch

143972872
4FE211ZB: RNCC: 3 | RNVC: 2
LH92011: RNCC: 5 | RNVC: 2
LH91043: RNCC: 5 | RNVC: 2
0060565Q00: RNCC: 5 | RNVC: 2
85-692-6136: RNCC: 6 | RNVC: 9

1 Dec 1984

5340-14-537-1220
Loop Clamp

145371220
97129-162244030: RNCC: 3 | RNVC: 2

1 Oct 2003

5340-14-287-5955
Caster Frame

142875955
663-002: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-512-5448
Butt Hinge

145125448
F293-53817: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-461-4608
Access Cover

144614608
BC100A280-109: RNCC: 3 | RNVC: 9
1006609L00: RNCC: 5 | RNVC: 2

10 Mar 1993

5340-14-460-7032
Clamping Catch

144607032
7003+7003-50: RNCC: 3 | RNVC: 2
16292526: RNCC: 5 | RNVC: 2

4 Feb 1993

5340-14-398-8176
Snap Hook

143988176
41-54-20-9: RNCC: 3 | RNVC: 2

20 Feb 1985

5340-14-540-0073
Access Cover

145400073
21402555-00: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-444-1053
Rim Lock Set

144441053
DP002-054: RNCC: 3 | RNVC: 2

18 Dec 1990

5340-14-206-9159
Loop Clamp

142069159
ASNA0021-25G10: RNCC: 1 | RNVC: 2
51113105010: RNCC: 3 | RNVC: 2
9613: RNCC: 5 | RNVC: 2
VDP5215: RNCC: 5 | RNVC: 2
A0021-25G10: RNCC: 5 | RNVC: 2
Z00.N7141380611: RNCC: 5 | RNVC: 2
24G10: RNCC: 5 | RNVC: 2
253101000: RNCC: 5 | RNVC: 2
25G10: RNCC: 5 | RNVC: 2
25G10: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-205-9123
Rod End Clevis

142059123
253-5M366P67C: RNCC: 3 | RNVC: 9
PA253-5M366P67C: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-314-9906
Plug Button

143149906
832-308-001BIS4: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-205-5626
Protection Bellows

142055626
253-5M112P106: RNCC: 3 | RNVC: 9
PA253-5M112P106: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-452-5297
Loop Clamp

144525297
M3B702-009: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-358-2530
Bumper

143582530
38306-292-000: RNCC: 3 | RNVC: 2
38306-292-000: RNCC: 5 | RNVC: 2

13 Aug 1979

5340-14-484-6474
Access Cover

144846474
A03001-01-0000P003: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-347-8547
Mounting Plate

143478547
41-14205PL1REPB: RNCC: 3 | RNVC: 2
41-14205PL1REPB: RNCC: 5 | RNVC: 9

1 Mar 1978

5340-14-257-1474
Mending Plate

142571474
330A25-2202-43: RNCC: 3 | RNVC: 2
330A25-2202-4300: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-363-7792
Sliding Door Track

143637792
330A22-2313-31: RNCC: 3 | RNVC: 2

6 Jul 1980

5340-14-542-1506
Expansion Shield

145421506
058750: RNCC: 3 | RNVC: 2
194-3251: RNCC: 5 | RNVC: 2
HIT8/60: RNCC: 5 | RNVC: 2
SC086777: RNCC: 6 | RNVC: 9

8 Jul 2004

5340-14-225-4723
Mounting Bracket

142254723
253-5M361P91: RNCC: 3 | RNVC: 9
PA253-5M361P91: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-425-9829
Access Cover

144259829
160H752501-04: RNCC: 3 | RNVC: 2

28 Jul 1988

5340-14-529-4186
Pipe Hanger

145294186
EA1M705-28-24: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-406-3776
Rod End Clevis

144063776
N262-0705-51010-11: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-459-5926
Anchor Strap

144595926
M375-117108: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-14-378-0431
Access Cover

143780431
NO PRIMARY REF14-378-0431: RNCC: 3 | RNVC: 2
15242440: RNCC: 5 | RNVC: 9

20 Jul 1982

5340-14-361-5195
Bumper

143615195
B0064-004F17: RNCC: 3 | RNVC: 2
B0064-004F17B: RNCC: 5 | RNVC: 2

24 Jan 1980

5340-14-465-5048
Access Cover

144655048
365A81-0080-08: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-552-1643
Loop Clamp Kit

145521643
260515456-00: RNCC: 3 | RNVC: 2

29 Nov 2006

5340-14-299-2129
Retaining Strap

142992129
007-32-20-007: RNCC: 3 | RNVC: 2
EB007-32-20-007: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-256-7911
Bow Handle

142567911
4H002909-00: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-427-0406
Retaining Strap

144270406
2-8500-2399: RNCC: 3 | RNVC: 2
85-693-6486: RNCC: 6 | RNVC: 9

5 Oct 1988

5340-14-224-0206
Handwheel

142240206
GSM137-001F9DET2SANSB0ULEAS10G: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-534-1304
Access Cover

145341304
332P68-1464-03: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-534-0981
Bumper

145340981
332A22-1385-03: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-392-0746
Loop Clamp

143920746
320-039-201-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-418-3359
Angle Bracket

144183359
5-454101: RNCC: 3 | RNVC: 9
5-454101: RNCC: 5 | RNVC: 2
5-454101: RNCC: 5 | RNVC: 9

12 Aug 1987

5340-14-489-1732
Bow Handle

144891732
10366: RNCC: 3 | RNVC: 2

2 Jul 1997

5340-14-470-3008
Angle Bracket

144703008
78721DH34: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-14-483-0454
T Bracket

144830454
ALZ084055042020: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-270-9977
Quick Release Pin

142709977
575-1: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-518-5602
Mounting Bracket

145185602
5000747114: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-556-0038
Webbing Strap

145560038
FAHK5 044 P 30732000000000: RNCC: 3 | RNVC: 2

21 Jan 2008

5340-14-314-5651
Clamp Bolt Assembly

143145651
V3SD18101-2: RNCC: 3 | RNVC: 2
V3SD18101-2: RNCC: 5 | RNVC: 2
V3SD18101-2: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-475-7057
Mounting Bracket

144757057
27110688-6: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-14-528-2660
Synchro Clamp

145282660
27169596-6: RNCC: 3 | RNVC: 2

16 Jan 2002

5340-14-316-8605
Retaining Band

143168605
FMM018: RNCC: 3 | RNVC: 2
20687206-4: RNCC: 5 | RNVC: 2
687206: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-529-8040
Mounting Bracket

145298040
19215146: RNCC: 3 | RNVC: 2

10 Apr 2002

5340-14-426-2889
Mortise Lock Set

144262889
8303220050: RNCC: 3 | RNVC: 2
8303220050: RNCC: 5 | RNVC: 2

18 Aug 1988

5340-14-249-8287
Loop Clamp

142498287
HE60P21-2: RNCC: 3 | RNVC: 2
HE60P21-2: RNCC: 5 | RNVC: 2
531215: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-441-4294
Rod End Connector

144414294
PM1A765500007: RNCC: 3 | RNVC: 2
PM1A765500007: RNCC: 5 | RNVC: 2

22 Aug 1990

5340-14-304-6231
Bail Handle

143046231
702445: RNCC: 3 | RNVC: 2
20702445-6: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-354-2467
Quick Release Pin

143542467
16324399: RNCC: 3 | RNVC: 2
16324399: RNCC: 5 | RNVC: 9

30 Jan 1979

5340-14-392-6383
Webbing Strap

143926383
4-000011-000140: RNCC: 3 | RNVC: 2
4-011-0140: RNCC: 5 | RNVC: 2

7 Apr 1984

5340-14-370-5614
Detent Plunger

143705614
TS57308: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-444-2016
Control Rod

144442016
310-3: RNCC: 3 | RNVC: 2

18 Dec 1990

5340-14-316-5818
Control Rod

143165818
106-1: RNCC: 3 | RNVC: 2
101095: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-400-4600
Webbing Strap

144004600
11355AVEC01811-2: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-365-4261
Angle Bracket

143654261
19302898: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-325-6335
Pipe Hanger

143256335
121S71-242-43-0: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-544-4490
Mounting Plate

145444490
101006001012A01: RNCC: 3 | RNVC: 9

1 Feb 2005

5340-14-527-3924
Mounting Plate

145273924
H145513W: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-450-6556
Butt Hinge

144506556
72-7-3685: RNCC: 3 | RNVC: 2

16 Oct 1991

5340-14-547-1012
Mounting Plate

145471012
399-008-576-0: RNCC: 3 | RNVC: 2

22 Sep 2005

5340-14-289-6081
Corner Brace

142896081
121E27-207-10-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-336-1143
Rod End Clevis

143361143
3-2512: RNCC: 3 | RNVC: 2
33-2507: RNCC: 5 | RNVC: 2

24 Jul 1976

5340-14-466-5424
Blank Panel

144665424
40-6-4E5-14: RNCC: 3 | RNVC: 2
89468036: RNCC: 5 | RNVC: 2

15 Nov 1993

5340-14-325-2459
Angle Bracket

143252459
E4M703-27-90-03: RNCC: 3 | RNVC: 2
85-686-4601: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-337-5574
Mending Plate

143375574
A240-1-25PS: RNCC: 3 | RNVC: 2
A240-1-25PS: RNCC: 3 | RNVC: 9

7 Oct 1976

5340-14-503-0132
Cover Strip

145030132
332A85-0142-51: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-521-1069
Arched Cushion

145211069
MAT169-0027F18DE33,7: RNCC: 3 | RNVC: 2

7 Jul 2000

5340-14-383-1079
Retaining Band

143831079
365A84-3065-00: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-420-8829
Leaf Spring

144208829
NO PRIMARY REF14-420-8829: RNCC: 3 | RNVC: 2
15921-4: RNCC: 5 | RNVC: 9

22 Dec 1987

5340-14-393-4411
Mending Plate

143934411
0288860320: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-510-7039
Mounting Bracket

145107039
TR15262-2: RNCC: 3 | RNVC: 2

4 Nov 1998

5340-14-519-8938
Mounting Plate

145198938
NO PRIMARY REF14-519-8938: RNCC: 3 | RNVC: 2
212763: RNCC: 5 | RNVC: 9

19 Apr 2000

5340-14-550-9712
Mounting Bracket

145509712
341A61-1323-20: RNCC: 3 | RNVC: 2

4 Aug 2006

5340-14-546-4626
Mounting Plate

145464626
5010559714: RNCC: 3 | RNVC: 2

6 Jul 2005

5340-14-526-9751
Mounting Bracket

145269751
ST159-2M667R703: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-316-8975
Control Rod

143168975
332-03NM: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-291-1900
Bumper

142911900
R0QAC89F1-116117: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-368-0124
Rod End Clevis

143680124
B0261-002F19: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-515-1842
Pipe Hanger

145151842
78731-014-100: RNCC: 3 | RNVC: 2

12 Jul 1999

5340-14-470-3886
Mounting Bracket

144703886
16234407: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-14-496-8612
Clamping Catch

144968612
14021-20130-02: RNCC: 3 | RNVC: 2
F300 0T 022 2082: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-480-5684
Plug Button

144805684
002422070A: RNCC: 3 | RNVC: 2
8361-103: RNCC: 3 | RNVC: 2

14 Mar 1996

5340-14-442-8331
Mounting Plate

144428331
091-01-305: RNCC: 3 | RNVC: 2
C082-01-303B: RNCC: 5 | RNVC: 2

6 Nov 1990

5340-14-435-9575
Pipe Hanger

144359575
332A21-1932-20: RNCC: 3 | RNVC: 2

29 Nov 1989

5340-14-534-1383
Webbing Strap

145341383
332V82-0019-13: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-435-1428
Hand Crank Arm

144351428
J05266-01-2400P001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-14-434-3705
Mounting Bracket

144343705
332A22-1096-02: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-542-4521
Mounting Plate

145424521
CAP10-70-08-02: RNCC: 3 | RNVC: 9

14 Jul 2004

5340-14-520-1570
Loop Clamp

145201570
706A36-8520-05: RNCC: 1 | RNVC: 2
514045: RNCC: 3 | RNVC: 2
514045: RNCC: 5 | RNVC: 9

17 May 2000

5340-14-213-4154
Retaining Strap

142134154
60290-01-42-07: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-454-1757
Rim Latch

144541757
LN331-018 3222431-06: RNCC: 3 | RNVC: 2
322243106: RNCC: 5 | RNVC: 2

24 Mar 1992

5340-14-443-5463
Angle Bracket

144435463
CAP230-70-31-012A: RNCC: 3 | RNVC: 9

28 Nov 1990

5340-14-370-7323
Bow Handle

143707323
676-11119-00-94: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-291-1852
Access Cover

142911852
E57-65: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-512-5483
Section Block Clamp

145125483
F706-42-02: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-525-8437
Eye Hook

145258437
N135171A: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-531-2232
Mounting Bracket

145312232
341A66-6052-20: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-510-1196
Mounting Bracket

145101196
01M065: RNCC: 3 | RNVC: 2
1680AA8008463: RNCC: 6 | RNVC: 9
FC75-123-9-1-1200MM: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-281-7200
Recess Handle

142817200
NO PRIMARY REF14-281-7200: RNCC: 3 | RNVC: 2
BF5-1: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-494-5354
Rod End Connector

144945354
594 955 43: RNCC: 3 | RNVC: 2
F300 0T 017 4526: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-291-1692
Mending Plate

142911692
42235: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-354-8239
Quick Release Pin

143548239
2000060-3-5: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-496-2314
Mounting Plate

144962314
75089-3: RNCC: 3 | RNVC: 2
F300 0T 021 0493: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-439-1941
Mounting Bracket

144391941
16007264: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-380-2624
Rod End Clevis

143802624
TB30-27149-100: RNCC: 3 | RNVC: 2

8 Nov 1982

5340-14-546-0615
Cushioning Pad

145460615
118.8210.150: RNCC: 3 | RNVC: 2
017536: RNCC: 5 | RNVC: 2

8 Jun 2005

5340-14-382-4539
Access Cover

143824539
435-65001-205: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-523-0681
Beam Gripping Clamp

145230681
2 257 091 L 00: RNCC: 3 | RNVC: 2

20 Dec 2000

5340-14-434-0709
Protection Bellows

144340709
534742: RNCC: 3 | RNVC: 2

4 Sep 1989

5340-14-341-1287
Webbing Strap

143411287
002506050P: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-426-1415
Butt Hinge

144261415
M268-00046: RNCC: 3 | RNVC: 2
F300 0T 006 1282: RNCC: 6 | RNVC: 9

4 Aug 1988

5340-14-462-3608
Mounting Plate

144623608
P1-7850-126: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-14-477-7370
Angle Bracket

144777370
1405-213-000A01: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-14-403-3801
Clamping Catch

144033801
GP.15-BR: RNCC: 3 | RNVC: 2
8921604312: RNCC: 5 | RNVC: 2
GP15BR: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-350-2240
Synchro Clamp

143502240
A0141-223: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-452-8643
Loop Clamp

144528643
RSGU1-19-20W1: RNCC: 3 | RNVC: 2
91727051: RNCC: 5 | RNVC: 2

22 Jan 1992

5340-14-404-6796
Angle Bracket

144046796
365A69-2016-40: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-419-4067
Mounting Bracket

144194067
6H1-43881-00: RNCC: 3 | RNVC: 2

16 Oct 1987

5340-14-535-3615
Mounting Bracket

145353615
192-12143-190: RNCC: 3 | RNVC: 2
5001855617: RNCC: 5 | RNVC: 2

22 May 2003

5340-14-437-9490
Butt Hinge

144379490
330A58-3213-21: RNCC: 3 | RNVC: 2

28 Feb 1990

5340-14-302-7958
Butt Hinge

143027958
4003-20X30X2000LAIT0NP0LI: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-261-7714
Rim Lock

142617714
5340-04APPLIQUE2M-DROITE: RNCC: 3 | RNVC: 2
LP033-02F2-4REP1: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-344-7672
Tubular Fairlead

143447672
80-300270: RNCC: 3 | RNVC: 2
85-300-2700: RNCC: 6 | RNVC: 9

9 Sep 1977

5340-14-407-5097
Runner

144075097
814730: RNCC: 3 | RNVC: 2
465-566: RNCC: 5 | RNVC: 2
E10231-13: RNCC: 5 | RNVC: 2

27 Feb 1986

5340-14-496-9090
Access Cover

144969090
NO PRIMARY REF14-496-9090: RNCC: 3 | RNVC: 2
270-01-89230: RNCC: 5 | RNVC: 9
F300 0T 022 2586: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-442-6151
Utility Access Door

144426151
24101036500: RNCC: 3 | RNVC: 2
205430-CC: RNCC: 5 | RNVC: 2
43002949: RNCC: 5 | RNVC: 2

23 Oct 1990

5340-14-534-3941
Access Cover

145343941
332A58-0016-1951: RNCC: 3 | RNVC: 2

21 Mar 2003

5340-14-396-6515
Access Cover

143966515
2066-0110: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-331-2443
Loop Clamp

143312443
0235217640: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-489-6491
Mounting Bracket

144896491
332A22-1067-2151: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-410-6283
Retaining Strap

144106283
401054: RNCC: 3 | RNVC: 2
BGE401054: RNCC: 5 | RNVC: 2

9 Jul 1986

5340-14-528-2341
Rigid Caster

145282341
020-953728: RNCC: 3 | RNVC: 9

15 Jan 2002

5340-14-436-6808
Mounting Plate

144366808
DA2C781210101: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-468-7918
Cable Retractor

144687918
67M70: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-14-316-8553
Mending Plate

143168553
61316ADET12: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-365-7207
Access Cover

143657207
004083050P: RNCC: 3 | RNVC: 2

8 Oct 1980

5340-14-466-8456
Access Cover

144668456
5100246: RNCC: 3 | RNVC: 2
5000497540: RNCC: 5 | RNVC: 2

3 Dec 1993

5340-14-540-8248
Access Cover

145408248
X1568282: RNCC: 3 | RNVC: 2

23 Apr 2004

5340-14-325-2078
Rod End Clevis

143252078
522723A: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-517-3248
Mounting Bracket

145173248
F1262328: RNCC: 3 | RNVC: 2
F1262328: RNCC: 5 | RNVC: 2

2 Dec 1999

5340-14-548-7406
Plug Button

145487406
26006008100: RNCC: 3 | RNVC: 2

6 Feb 2006

5340-14-513-3875
Mounting Bracket

145133875
DE33607: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-14-319-0946
Anchor Strap

143190946
R106294: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-488-8039
Angle Bracket

144888039
16775613: RNCC: 3 | RNVC: 2

4 Jun 1997

5340-14-340-8847
Key Blank

143408847
55X100X1400ACB165TRAITE: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-277-7969
Access Cover

142777969
12504932: RNCC: 3 | RNVC: 2
12504932: RNCC: 3 | RNVC: 9

1 Jan 1971

5340-14-555-4139
Loop Clamp

145554139
78651DH7AS: RNCC: 1 | RNVC: 2
78651DH7AS: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-14-372-1872
Access Door Hinge

143721872
141327: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-399-7105
Tubular Fairlead

143997105
253994: RNCC: 3 | RNVC: 2
253994: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-489-2004
Mounting Bracket

144892004
U07168: RNCC: 3 | RNVC: 9

2 Jul 1997

5340-14-439-1409
Swivel Caster

144391409
7819005: RNCC: 3 | RNVC: 2
89411390: RNCC: 5 | RNVC: 2
7819005: RNCC: 5 | RNVC: 9

25 Apr 1990

5340-14-511-3854
Rod End Clevis

145113854
103090002305: RNCC: 3 | RNVC: 2
103090002305: RNCC: 5 | RNVC: 2

16 Dec 1998

5340-14-332-2018
Access Door Hinge

143322018
0000727290: RNCC: 3 | RNVC: 2
0000727290: RNCC: 5 | RNVC: 9
727290: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-443-9543
Rod End Clevis

144439543
F102466: RNCC: 3 | RNVC: 2
1004866R00: RNCC: 5 | RNVC: 2
F102466: RNCC: 6 | RNVC: 9

17 Dec 1990

5340-14-358-5896
Rod End Clevis

143585896
5001CRL20-811: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-444-2656
Rod End Clevis

144442656
1252012010: RNCC: 3 | RNVC: 2
6F300 0T 014 5092: RNCC: 3 | RNVC: 2
A05010501: RNCC: 3 | RNVC: 2
DAH1252012010: RNCC: 5 | RNVC: 9
A05010501: RNCC: 5 | RNVC: 9
F300 0T 018 3141: RNCC: 6 | RNVC: 9

20 Dec 1990

5340-14-483-4251
Plug Button

144834251
4GM001415H01: RNCC: 3 | RNVC: 2
5340AA2071383: RNCC: 6 | RNVC: 9

12 Sep 1996

5340-14-546-4655
Loop Clamp

145464655
5010377189: RNCC: 3 | RNVC: 2

6 Jul 2005

5340-14-204-9414
Handle Grip

142049414
10-15502: RNCC: 3 | RNVC: 2
20011: RNCC: 5 | RNVC: 2
20011N476: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-14-404-6540
Angle Bracket

144046540
612304: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-468-7919
Cable Retractor

144687919
67M50: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-14-424-9813
Runner

144249813
13751: RNCC: 3 | RNVC: 2

16 Jun 1988

5340-14-235-1461
Mending Plate

142351461
45499: RNCC: 3 | RNVC: 9

1 Jan 1967

5340-14-404-7252
Mending Plate

144047252
39048377: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-476-0896
Angle Bracket

144760896
222-3017-796: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-532-0603
Cover Strip

145320603
03-250-554: RNCC: 3 | RNVC: 2
SZ03.250.554: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-237-5042
Rod End Clevis

142375042
321A58-0504-20: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-386-1137
Angle Bracket

143861137
396170: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-514-4817
Shelf Bracket

145144817
45219334: RNCC: 3 | RNVC: 2
45219334: RNCC: 5 | RNVC: 2
IF-192-0354: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-497-6865
Mounting Plate

144976865
7K2357: RNCC: 3 | RNVC: 2
F300 0T 023 4912: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-554-9113
Mounting Bracket

145549113
82116569000: RNCC: 3 | RNVC: 2

6 Sep 2007

5340-14-533-8850
Angle Bracket

145338850
42-300-166: RNCC: 3 | RNVC: 2
SZ42.300.166: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-444-9358
Threaded Rod End

144449358
721-913-506: RNCC: 3 | RNVC: 2

29 Jan 1991

5340-14-440-1535
Runner

144401535
1600-100-237-02: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-335-0509
Handwheel

143350509
MAT137-003F8CUPROALU: RNCC: 3 | RNVC: 2
GSM137-007F20CUPR0ALU: RNCC: 5 | RNVC: 2
GSM137-07F20CUPR0ALU: RNCC: 5 | RNVC: 2

2 Jun 1976

5340-14-501-9392
Mounting Bracket

145019392
332A23-0571-02: RNCC: 3 | RNVC: 2

19 Nov 1997

5340-14-299-3040
Mending Plate

142993040
NO PRIMARY REF14-299-3040: RNCC: 3 | RNVC: 2
15-24-10-25: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-259-5198
Mounting Plate

142595198
RU761-43M713P13A: RNCC: 3 | RNVC: 2
761-43M713P13A: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-432-5398
Loop Clamp

144325398
GMIANP020-02: RNCC: 3 | RNVC: 2

14 Jun 1989

5340-14-253-4164
Lock Bolt

142534164
321A58-0413-01: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-378-4201
Pipe Hanger

143784201
366A75-3079-00: RNCC: 3 | RNVC: 2

11 Aug 1982

5340-14-457-2623
Mounting Plate

144572623
402246CSG10137-Z2CND17-12: RNCC: 3 | RNVC: 2

20 Aug 1992

5340-14-346-9273
Retaining Strap

143469273
C81-58000: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-14-465-2993
Mounting Bracket

144652993
365A81-0361-09: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-468-5291
Cover Strip

144685291
330A25-2037-23: RNCC: 3 | RNVC: 2

3 Mar 1994

5340-14-488-1186
Section Block Clamp

144881186
A4820363: RNCC: 3 | RNVC: 2
A48203-63: RNCC: 5 | RNVC: 2
P48203-63A: RNCC: 5 | RNVC: 2

18 Apr 1997

5340-14-360-6103
Bow Handle

143606103
S1V26-010260B: RNCC: 3 | RNVC: 2
S1V26-010-260B: RNCC: 5 | RNVC: 2

19 Dec 1979

5340-14-290-2747
Rod End Clevis

142902747
330A33-0109-01: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-390-6462
Control Rod

143906462
710010-20060: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-531-2326
Mounting Bracket

145312326
341A84-5009-23: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-482-9191
Pipe Hanger

144829191
78731-040-100: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-448-7113
Runner

144487113
A03037-10-2010P007: RNCC: 3 | RNVC: 2

4 Jul 1991

5340-14-480-8554
Loop Clamp

144808554
728224S342-00A: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-14-490-7243
Access Cover

144907243
NO PRIMARY REF14-490-7243: RNCC: 3 | RNVC: 2
K110547: RNCC: 5 | RNVC: 9
304 255 212: RNCC: 6 | RNVC: 9
F300 0T 000 2885: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-534-9590
Mounting Bracket

145349590
670-167578: RNCC: 3 | RNVC: 2
EN001385: RNCC: 6 | RNVC: 9

23 Apr 2003

5340-14-426-1685
Angle Bracket

144261685
160H772030-01: RNCC: 3 | RNVC: 2

4 Aug 1988

5340-14-536-2637
Access Cover

145362637
3941564-06: RNCC: 3 | RNVC: 2
SYQ3191: RNCC: 5 | RNVC: 2

22 Jul 2003

5340-14-379-0748
Protection Bellows

143790748
360A27-2266-20: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-533-9806
Mounting Bracket

145339806
M33014725-3: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-381-2836
Access Cover

143812836
VDP3140-1: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-361-2797
Retaining Strap

143612797
M426-02114: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-483-9361
Access Cover

144839361
4111-4200: RNCC: 3 | RNVC: 2
4111-42: RNCC: 5 | RNVC: 2

10 Oct 1996

5340-14-339-4709
Rod End Clevis

143394709
M3C270-43-811: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-456-8732
Arched Cushion

144568732
MAT169-0012F20DE26: RNCC: 3 | RNVC: 2

24 Jul 1992

5340-14-530-9268
Mounting Plate

145309268
PL/00/05/D/05/A: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-14-260-0608
Lock Bolt

142600608
321A58-0414-11: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-444-1048
Rim Lock Set

144441048
DP002-049: RNCC: 3 | RNVC: 2

18 Dec 1990

5340-14-531-8236
Cover Strip

145318236
341A65-7418-25: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-14-382-8221
Angle Bracket

143828221
NO PRIMARY REF14-382-8221: RNCC: 3 | RNVC: 2
RF72IMS1004: RNCC: 5 | RNVC: 2

17 Feb 1983

5340-14-332-3045
Handwheel

143323045
NO PRIMARY REF14-332-3045: RNCC: 3 | RNVC: 2
25242: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-331-7929
Retaining Strap

143317929
574-510-271-0: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-402-8777
Angle Bracket

144028777
NO PRIMARY REF14-402-8777: RNCC: 3 | RNVC: 2
20E3695: RNCC: 5 | RNVC: 9

19 Jul 1985

5340-14-435-2800
Mounting Bracket

144352800
332A21-1209-20: RNCC: 3 | RNVC: 2

2 Nov 1989

5340-14-503-9885
Blank Panel

145039885
PAN-Q93709C0V: RNCC: 3 | RNVC: 2
PAN-Q93709X0V: RNCC: 5 | RNVC: 9

4 Feb 1998

5340-14-272-5750
Rod End Clevis

142725750
160-10013-85: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-533-2858
Angle Bracket

145332858
STBS025: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-420-6749
Rigid Caster

144206749
BJM00372: RNCC: 3 | RNVC: 2

16 Dec 1987

5340-14-231-0915
Loop Clamp

142310915
51213102005: RNCC: 3 | RNVC: 2
5000604307: RNCC: 5 | RNVC: 2
20G5: RNCC: 5 | RNVC: 2
5000604307: RNCC: 6 | RNVC: 9

1 Jan 1967

5340-14-484-8446
Control Rod

144848446
1053731N02: RNCC: 3 | RNVC: 2

10 Dec 1996

5340-14-381-7958
Access Cover

143817958
16009650: RNCC: 3 | RNVC: 2
16009650: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-303-4877
Retaining Strap

143034877
502-515-632-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-386-5104
Tubular Fairlead

143865104
7760: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-336-7108
Rod End Clevis

143367108
184551: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-249-7103
Access Cover

142497103
303796-4: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-545-6943
Angle Bracket

145456943
RA1M703766511: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-507-2889
Casement Fastener

145072889
1000067: RNCC: 3 | RNVC: 2

24 Jun 1998

5340-14-451-5148
Mounting Bracket

144515148
532306: RNCC: 3 | RNVC: 2

21 Nov 1991

5340-14-283-0262
Bumper

142830262
2-08535: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-550-0969
Mounting Plate

145500969
233500: RNCC: 3 | RNVC: 2

1 Jun 2006

5340-14-551-6837
Mounting Bracket

145516837
82108665000: RNCC: 3 | RNVC: 2

16 Oct 2006

5340-14-206-9156
Loop Clamp

142069156
51113105030: RNCC: 3 | RNVC: 2
25G30: RNCC: 5 | RNVC: 2
18574863-1: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-357-8394
Flush Catch Claw

143578394
90033: RNCC: 3 | RNVC: 2
5000502551: RNCC: 5 | RNVC: 2
5000502551: RNCC: 5 | RNVC: 9

20 Jul 1979

5340-14-519-6595
Detent Plunger

145196595
5010399403: RNCC: 3 | RNVC: 2

29 Mar 2000

5340-14-285-1273
Retaining Strap

142851273
270652: RNCC: 3 | RNVC: 2
270652: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-349-3002
Access Cover

143493002
5000495885: RNCC: 3 | RNVC: 2
5000495885: RNCC: 5 | RNVC: 9

22 May 1978

5340-14-526-9602
Lock Bolt

145269602
10607279: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-512-3871
Bumper

145123871
3BM04302AAAA: RNCC: 3 | RNVC: 2

11 Feb 1999

5340-14-230-5309
Loop Clamp

142305309
0202120300: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-503-9506
Clamping Catch

145039506
3352980: RNCC: 3 | RNVC: 2

4 Feb 1998

5340-14-476-7699
Angle Bracket

144767699
01FUAC4201: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-14-550-2978
Cover Strip

145502978
350A58-5003-20: RNCC: 3 | RNVC: 2

15 Jun 2006

5340-14-338-4549
Pipe Hanger

143384549
330A75-5427-0001: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-396-2869
Access Cover

143962869
NO PRIMARY REF14-396-2869: RNCC: 3 | RNVC: 2
33192: RNCC: 5 | RNVC: 9
D20-33192: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-392-0164
Utility Access Door

143920164
365A23-4302-13: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-445-8710
Mounting Bracket

144458710
160-13603-44: RNCC: 3 | RNVC: 2

27 Feb 1991

5340-14-383-5971
Tubular Fairlead

143835971
TB30-27166-112: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-477-0242
Runner

144770242
24876-00: RNCC: 3 | RNVC: 9
1110260S00: RNCC: 5 | RNVC: 2

17 Jul 1995

5340-14-444-5689
Access Cover

144445689
E967-816: RNCC: 3 | RNVC: 2
5000821108: RNCC: 3 | RNVC: 2
E967-816: RNCC: 5 | RNVC: 9

15 Jan 1991

5340-14-438-6844
Mounting Bracket

144386844
321A97-0050-00: RNCC: 3 | RNVC: 2

28 Mar 1990

5340-14-468-1741
Angle Bracket

144681741
78703-30-055B: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-432-3487
Pipe Hanger

144323487
160G732013-02: RNCC: 3 | RNVC: 2

7 Jun 1989

5340-14-348-3174
Retaining Strap

143483174
C2: RNCC: 3 | RNVC: 2
201-10020: RNCC: 5 | RNVC: 2

29 Mar 1978

5340-14-351-6549
Bumper

143516549
ET0019-77: RNCC: 3 | RNVC: 2

12 Sep 1978

5340-14-484-9310
Bumper

144849310
398049: RNCC: 3 | RNVC: 2
398049-001: RNCC: 5 | RNVC: 9

12 Dec 1996

5340-14-335-2645
Anchor Strap

143352645
M271-3044: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-550-6219
Mounting Plate

145506219
ROA/03/09/501: RNCC: 3 | RNVC: 2

3 Jul 2006

5340-14-393-0600
Mounting Plate

143930600
ST159-2M112-2P55: RNCC: 3 | RNVC: 2
J05087-112-2000P055: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-14-525-3088
Mounting Bracket

145253088
355A75-1221-20: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-442-2672
Control Rod

144422672
1194-05-05: RNCC: 3 | RNVC: 2

8 Oct 1990

5340-14-434-1406
Protection Bellows

144341406
121-844-13-10-31: RNCC: 3 | RNVC: 2

6 Sep 1989

5340-14-344-0523
Handwheel

143440523
A0064-007: RNCC: 3 | RNVC: 2

13 Jul 1977

5340-14-440-3388
Bumper

144403388
332A87-0025-25: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-473-3283
Pipe Hanger

144733283
MY20717-56: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-271-0256
Loop Clamp

142710256
3160S86-30-014: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-534-1345
Loop Holder

145341345
332P85-1011-01: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-349-3602
Angle Bracket

143493602
M208-21019: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-417-1682
Butt Hinge

144171682
110-2712-00-11-02: RNCC: 3 | RNVC: 2
85-693-4157: RNCC: 6 | RNVC: 9

1 Jul 1987

5340-14-395-0251
Angle Bracket

143950251
853-200-471-0: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-352-4136
Strap Fastener Loop

143524136
MB1073P: RNCC: 3 | RNVC: 2
8890: RNCC: 5 | RNVC: 9
MB1073P: RNCC: 5 | RNVC: 9
85-800-5666: RNCC: 6 | RNVC: 9

16 Oct 1978

5340-14-340-6623
Loop Clamp

143406623
650-402-008-0: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-318-9599
Bumper

143189599
63-27-12-43: RNCC: 3 | RNVC: 2
63-27-12-13: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-500-3212
Runner

145003212
NO PRIMARY REF14-500-3212: RNCC: 3 | RNVC: 2
24-7-3357: RNCC: 5 | RNVC: 9
F300 0T 024 3300: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-346-1452
Mending Plate

143461452
T60-15: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-398-6423
Webbing Strap

143986423
E60-6M: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-386-4925
Access Cover

143864925
FA1R703-55-12: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-434-7504
Access Cover

144347504
018767R: RNCC: 3 | RNVC: 2
60-0106: RNCC: 5 | RNVC: 2

3 Oct 1989

5340-14-349-1373
Rod End Connector

143491373
300-690-003-0: RNCC: 3 | RNVC: 2
001406030A: RNCC: 5 | RNVC: 2
300-690-003P: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-242-6883
Mending Plate

142426883
ST104M4-1-13P16: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-457-5264
Access Cover

144575264
P3C006515-00: RNCC: 3 | RNVC: 2
313861: RNCC: 5 | RNVC: 2
5044879: RNCC: 5 | RNVC: 9
P3C006515-00: RNCC: 5 | RNVC: 9

10 Sep 1992

5340-14-550-6242
Bumper

145506242
20-16-20: RNCC: 3 | RNVC: 2

3 Jul 2006

5340-14-529-2000
Mounting Bracket

145292000
457-11921-000: RNCC: 3 | RNVC: 2

15 Mar 2002

5340-14-246-3711
Angle Bracket

142463711
NO PRIMARY REF14-246-3711: RNCC: 3 | RNVC: 2
25962: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-529-5906
Flush Catch Claw

145295906
330A87-2949-20: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-471-8986
Mounting Plate

144718986
CCM1-250A1: RNCC: 3 | RNVC: 2

22 Sep 1994

5340-14-541-7434
Mounting Plate

145417434
457-13538-000: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-326-6747
Loop Clamp

143266747
511131050072: RNCC: 3 | RNVC: 2
55G7: RNCC: 5 | RNVC: 2
85-666-4990: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-338-6700
Angle Bracket

143386700
16396736: RNCC: 3 | RNVC: 2
16396736: RNCC: 3 | RNVC: 9

17 Dec 1976

5340-14-505-3692
Mounting Bracket

145053692
030543: RNCC: 3 | RNVC: 2
FES030543: RNCC: 5 | RNVC: 9

18 Mar 1998

5340-14-524-0313
Mounting Plate

145240313
81.7.9025: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-14-422-9740
Mounting Plate

144229740
25018015100: RNCC: 3 | RNVC: 2
250180151: RNCC: 5 | RNVC: 9

24 Mar 1988

5340-14-550-4746
Mounting Plate

145504746
RA1B701304461N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-498-8856
Retaining Strap

144988856
058059S: RNCC: 3 | RNVC: 2
058059S22313: RNCC: 5 | RNVC: 2
F300 0T 010 7644: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-346-2160
Angle Bracket

143462160
26255021: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-488-2303
Mounting Plate

144882303
009243226P: RNCC: 3 | RNVC: 2

23 Apr 1997

5340-14-442-0925
Mounting Bracket

144420925
1290014: RNCC: 3 | RNVC: 2
1290014: RNCC: 5 | RNVC: 9

1 Oct 1990

5340-14-263-5120
Threaded Rod End

142635120
R113305: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-505-7378
Loop Clamp

145057378
82M0INS: RNCC: 3 | RNVC: 9

26 Mar 1998

5340-14-511-7559
Mounting Bracket

145117559
101165400509: RNCC: 3 | RNVC: 2
10 116 540 0509: RNCC: 5 | RNVC: 2
8810KITM0DIF19: RNCC: 5 | RNVC: 2

15 Jan 1999

5340-14-565-5556
Utility Resilient Mount

145655556
10681759000: RNCC: 3 | RNVC: 2

2 Sep 2010

5340-14-373-5896
Retaining Strap

143735896
F2031842: RNCC: 3 | RNVC: 2
F2031842: RNCC: 5 | RNVC: 9

13 Nov 1981

5340-14-385-9542
Quick Release Pin

143859542
5000499995: RNCC: 3 | RNVC: 2
5000499995: RNCC: 5 | RNVC: 9

24 Aug 1983

5340-14-517-7398
Loop Clamp

145177398
501-779-795-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-461-9361
Cover Strip

144619361
T700A5210222100: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-416-7876
Strap Hinge

144167876
1101548: RNCC: 3 | RNVC: 9

25 Jun 1987

5340-14-549-8297
Bumper

145498297
2092586: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-447-6576
Angle Bracket

144476576
39233386: RNCC: 3 | RNVC: 2
39233386: RNCC: 5 | RNVC: 9

29 May 1991

5340-14-455-7413
Mounting Plate

144557413
75520152: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-305-4565
Retaining Strap

143054565
1060670013: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-515-3383
Mounting Bracket

145153383
3536001102: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-516-6033
Mounting Bracket

145166033
033990N: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-14-548-6263
Retaining Strap

145486263
RA1M701246021N1: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-515-3003
Mounting Plate

145153003
0009314909: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-324-4995
Pipe Hanger

143244995
R4A711-41: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-429-4630
Quick Release Pin

144294630
10-044-050: RNCC: 3 | RNVC: 2

24 Jan 1989

Load More Results