What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 137 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 137 of 446

5340-14-512-5531
Section Block Clamp

145125531
F710-15-02: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-269-8986
Detent Plunger

142698986
NO PRIMARY REF14-269-8986: RNCC: 3 | RNVC: 2
445307: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-250-4451
Retaining Strap

142504451
153026: RNCC: 3 | RNVC: 2
M141701-02: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-439-2422
Loop Clamp

144392422
332A52-1189-00: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-438-9686
Mounting Bracket

144389686
330A98-3345-10: RNCC: 3 | RNVC: 2

11 Apr 1990

5340-14-313-8934
Loop Clamp

143138934
51210605050: RNCC: 3 | RNVC: 2
20F50: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-493-2746
Mounting Plate

144932746
16800841: RNCC: 3 | RNVC: 2
16800841: RNCC: 3 | RNVC: 9
F300 0T 011 8663: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-446-1861
Angle Bracket

144461861
2510115100-28: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-520-2700
Mounting Plate

145202700
714980: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-429-8327
Bumper

144298327
3158: RNCC: 3 | RNVC: 2

14 Feb 1989

5340-14-482-7235
Retaining Strap

144827235
1101136N00: RNCC: 3 | RNVC: 2

25 Jul 1996

5340-14-358-5323
Angle Bracket

143585323
5000496772: RNCC: 3 | RNVC: 2
5000496772: RNCC: 5 | RNVC: 9

7 Sep 1979

5340-14-519-1796
Bow Handle

145191796
4SH41539102: RNCC: 3 | RNVC: 2

10 Mar 2000

5340-14-434-0343
Anchor Strap

144340343
538837: RNCC: 3 | RNVC: 2

29 Aug 1989

5340-14-353-6136
Retaining Strap

143536136
573899358: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-379-3685
Access Cover

143793685
31796: RNCC: 3 | RNVC: 9

1 Oct 1982

5340-14-444-1459
Cover Strip

144441459
PM1A212500092: RNCC: 3 | RNVC: 2
PM1A212500092: RNCC: 5 | RNVC: 2

18 Dec 1990

5340-14-381-4032
Anchor Strap

143814032
227600: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-424-0897
Anchor Strap

144240897
969918P03: RNCC: 3 | RNVC: 2
969918P03: RNCC: 5 | RNVC: 9

11 May 1988

5340-14-445-4732
Access Cover

144454732
600Y851: RNCC: 3 | RNVC: 2
600Y851: RNCC: 5 | RNVC: 2

14 Feb 1991

5340-14-543-7495
Access Cover

145437495
4490000001: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-14-430-0456
Anchor Strap

144300456
20629909: RNCC: 3 | RNVC: 2
20629909: RNCC: 5 | RNVC: 9

27 Feb 1989

5340-14-452-6803
Mounting Bracket

144526803
GA70056: RNCC: 3 | RNVC: 2

15 Jan 1992

5340-14-236-3040
Retaining Strap

142363040
BY148A10227: RNCC: 3 | RNVC: 2
BFC10227: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-437-4889
Bail Handle

144374889
10502-112: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-482-5025
Angle Bracket

144825025
PM1A711240123: RNCC: 3 | RNVC: 2
PM1A711240123: RNCC: 5 | RNVC: 2

11 Jul 1996

5340-14-424-2167
Bail Handle

144242167
22447334: RNCC: 3 | RNVC: 2
1556254: RNCC: 5 | RNVC: 2
22447334: RNCC: 5 | RNVC: 9

19 May 1988

5340-14-524-3558
Mounting Plate

145243558
SD001PD021819: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-14-528-8764
Mounting Plate

145288764
TS140507: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-14-519-1483
Mounting Bracket

145191483
182163: RNCC: 3 | RNVC: 2
182163: RNCC: 3 | RNVC: 2

9 Mar 2000

5340-14-418-3310
Angle Bracket

144183310
4-453704: RNCC: 3 | RNVC: 9
4-453704: RNCC: 5 | RNVC: 2
4402066: RNCC: 5 | RNVC: 2
4-453704: RNCC: 5 | RNVC: 9

12 Aug 1987

5340-14-534-7163
Mounting Bracket

145347163
10572217: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-424-8609
Mounting Plate

144248609
1126317: RNCC: 3 | RNVC: 2
1126317: RNCC: 5 | RNVC: 2

9 Jun 1988

5340-14-402-0665
Bumper

144020665
BEL3041: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-552-7614
Mounting Plate

145527614
713060: RNCC: 3 | RNVC: 2

30 Jan 2007

5340-14-314-5362
Clamping Catch

143145362
102139-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-305-1093
Loop Clamp

143051093
512153050062: RNCC: 3 | RNVC: 2
50S6: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-512-0138
Mounting Bracket

145120138
0054303: RNCC: 3 | RNVC: 2
93191698: RNCC: 3 | RNVC: 9

2 Feb 1999

5340-14-411-0278
Rod End Clevis

144110278
THF36: RNCC: 3 | RNVC: 2

31 Jul 1986

5340-14-554-8550
Mounting Bracket

145548550
1496293: RNCC: 3 | RNVC: 2

31 Aug 2007

5340-14-488-5791
Runner

144885791
GLISS92731A00: RNCC: 3 | RNVC: 2
GLISS92731X00: RNCC: 5 | RNVC: 2

21 May 1997

5340-14-307-1859
Loop Clamp

143071859
1050380033: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-541-5672
Mounting Plate

145415672
SP5NR: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-501-9434
Access Cover

145019434
332A62-3439-00: RNCC: 3 | RNVC: 2

19 Nov 1997

5340-14-327-8637
Quick Release Pin

143278637
7-090-14-1225: RNCC: 3 | RNVC: 2
85-647-4020: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-546-3116
Mounting Plate

145463116
3-85-31-02-187-2: RNCC: 3 | RNVC: 2

23 Jun 2005

5340-14-489-6208
Access Cover

144896208
332A58-0055-0704: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-537-3460
Retaining Band

145373460
MAT169-0010F10/F11D8A10,3: RNCC: 3 | RNVC: 2

21 Oct 2003

5340-14-465-2763
Angle Bracket

144652763
365A61-3001-26: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-300-5083
Control Rod

143005083
NO PRIMARY REF14-300-5083: RNCC: 3 | RNVC: 2
12-72-13-03: RNCC: 5 | RNVC: 9
42-72-13-03: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-273-8295
Webbing Strap

142738295
NO PRIMARY REF14-273-8295: RNCC: 3 | RNVC: 2
131K853: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-350-0580
Angle Bracket

143500580
341A65-7671-20: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-451-0423
Retaining Band

144510423
52529810000: RNCC: 3 | RNVC: 2
671465-00: RNCC: 5 | RNVC: 2

28 Oct 1991

5340-14-439-4650
Mounting Plate

144394650
3210-32-07-891: RNCC: 3 | RNVC: 2
85-693-8951: RNCC: 6 | RNVC: 9

9 May 1990

5340-14-466-1398
Access Cover

144661398
JVBT221-03-02: RNCC: 3 | RNVC: 2
00123674F: RNCC: 5 | RNVC: 2
JVBT221-03-02-00: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-440-7121
Mounting Plate

144407121
431900000003: RNCC: 3 | RNVC: 2
13-108-3154: RNCC: 6 | RNVC: 9

18 Jul 1990

5340-14-487-4892
Access Cover

144874892
V4623479: RNCC: 3 | RNVC: 2
P46234-79V: RNCC: 5 | RNVC: 2
V46234-79: RNCC: 5 | RNVC: 2

10 Apr 1997

5340-14-490-3144
Mounting Plate

144903144
J05085-04-0800P009: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-469-0569
Angle Bracket

144690569
36-7417-020: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-14-225-9944
Snap Hook

142259944
4690-50-20-28: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-437-2587
Handle Grip

144372587
625-161: RNCC: 3 | RNVC: 2

24 Jan 1990

5340-14-297-7148
Access Cover

142977148
773-413-049DET2: RNCC: 3 | RNVC: 2
773-413-049DET2: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-530-9645
Angle Bracket

145309645
341A65-7881-21: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-14-430-9342
Angle Bracket

144309342
G230010-06: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-14-482-4199
Pipe Hanger

144824199
78732-050-040: RNCC: 3 | RNVC: 2

11 Jul 1996

5340-14-464-9653
Plate Spacer

144649653
365A61-6760-09: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-341-1783
Loop Clamp

143411783
M3E705-136: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-443-5446
Mounting Plate

144435446
CAP230-50-09-10A: RNCC: 3 | RNVC: 9

28 Nov 1990

5340-14-216-6473
Retaining Strap

142166473
NO PRIMARY REF14-216-6473: RNCC: 3 | RNVC: 2
291M520591: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-324-0822
Detent Plunger

143240822
A0188-006F26: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-207-2510
Lock Bolt

142072510
3160S21-05-016: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-377-2421
Pipe Hanger

143772421
366A54-1040-20: RNCC: 3 | RNVC: 2

17 May 1982

5340-14-403-5146
Bail Handle

144035146
PO.304-ZB: RNCC: 3 | RNVC: 2
P0304ZB: RNCC: 5 | RNVC: 2
PO304ZB: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-477-4779
Mounting Bracket

144774779
RPL522-420-440: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-14-549-8350
Mounting Bracket

145498350
169E241-00: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-489-6486
Mounting Bracket

144896486
332A21-1030-7301: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-372-6628
Bow Handle

143726628
K0232201: RNCC: 3 | RNVC: 2
K02-32-201: RNCC: 5 | RNVC: 2

21 Sep 1981

5340-14-394-7218
Rim Lock Set

143947218
NO PRIMARY REF14-394-7218: RNCC: 3 | RNVC: 2
6600-04FE003: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-200-4377
Buckle

142004377
31117-025-160: RNCC: 3 | RNVC: 2
001194013P: RNCC: 5 | RNVC: 2
ARTILLERIE6: RNCC: 5 | RNVC: 2

1 Jan 1962

5340-14-490-5571
Mounting Bracket

144905571
J05508-04-0900P002: RNCC: 3 | RNVC: 2

2 Oct 1997

5340-14-550-7767
Swivel Caster

145507767
HP6BD200-23B: RNCC: 3 | RNVC: 2

13 Jul 2006

5340-14-220-3968
Webbing Strap

142203968
2228-36-15-00-26: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-465-3696
Metal Grille

144653696
PDE459GR000: RNCC: 3 | RNVC: 2
HH72L002: RNCC: 5 | RNVC: 2
91678181: RNCC: 5 | RNVC: 2

22 Sep 1993

5340-14-544-5965
Buckle

145445965
B0UCLE ELASTIQUE GUMMA4MMPEGA AS: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-14-535-5409
Bumper

145355409
PTG31606: RNCC: 3 | RNVC: 2
PTREP5DN50: RNCC: 5 | RNVC: 9

3 Jun 2003

5340-14-537-4867
Mounting Plate

145374867
6501DME110089: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-279-0501
Mending Plate

142790501
DLT072080: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-360-7129
Doorknob

143607129
BAZ2310: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-514-0661
Block Clamp

145140661
RA1M704734523: RNCC: 3 | RNVC: 2

22 Apr 1999

5340-14-442-5731
Bumper

144425731
9440949: RNCC: 3 | RNVC: 2

22 Oct 1990

5340-14-551-8970
Mounting Bracket

145518970
RA1M701204095: RNCC: 3 | RNVC: 2

7 Nov 2006

5340-14-541-3603
Self-Locking Insert

145413603
MF006AA108C: RNCC: 3 | RNVC: 2
1114321M01: RNCC: 5 | RNVC: 2

3 Jun 2004

5340-14-546-6876
Mounting Bracket

145466876
5010616801: RNCC: 3 | RNVC: 2

2 Aug 2005

5340-14-547-8692
Mounting Bracket

145478692
5010628466: RNCC: 3 | RNVC: 2

21 Nov 2005

5340-14-447-4756
Loop Clamp

144474756
BK15A60004F22BDF17REP1A4: RNCC: 3 | RNVC: 2

15 May 1991

5340-14-512-7637
Pipe Hanger

145127637
800039695: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-403-0458
Mounting Plate

144030458
29739163: RNCC: 3 | RNVC: 2
29739163: RNCC: 5 | RNVC: 9

25 Jul 1985

5340-14-452-1785
Rim Latch

144521785
1000U45U197-23-24-25: RNCC: 3 | RNVC: 2

18 Dec 1991

5340-14-523-6544
Mounting Plate

145236544
F3526135: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-283-8626
Loop Clamp

142838626
51300005018: RNCC: 3 | RNVC: 2
11N18: RNCC: 5 | RNVC: 2
9560154780: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-437-7438
Angle Bracket

144377438
9689161129: RNCC: 3 | RNVC: 2
9689161129: RNCC: 5 | RNVC: 2

14 Feb 1990

5340-14-277-7947
Angle Bracket

142777947
12503682: RNCC: 3 | RNVC: 2
12503682: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-427-3219
Runner

144273219
400R136: RNCC: 3 | RNVC: 2
400R136: RNCC: 5 | RNVC: 2

13 Oct 1988

5340-14-361-2999
Loop Clamp

143612999
51110601005: RNCC: 3 | RNVC: 2
205F5: RNCC: 5 | RNVC: 2

24 Jan 1980

5340-14-319-0488
Angle Bracket

143190488
79023854: RNCC: 3 | RNVC: 2
79023854: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-429-0310
Retaining Strap

144290310
0301521230: RNCC: 3 | RNVC: 2

4 Jan 1989

5340-14-520-3576
Mounting Bracket

145203576
22115M022019: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-447-4748
Loop Clamp

144474748
BK15A60004F14BDF09REP1A4: RNCC: 3 | RNVC: 2

15 May 1991

5340-14-535-0669
Mounting Bracket

145350669
02000042: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-14-550-9091
Pipe Hanger

145509091
RA1B702446069: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-355-3566
Angle Bracket

143553566
055E02-519910R: RNCC: 3 | RNVC: 2
0519910R00: RNCC: 5 | RNVC: 2

19 Mar 1979

5340-14-548-1104
Angle Bracket

145481104
RA1A702336339: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-549-3020
Mounting Bracket

145493020
82144732000: RNCC: 3 | RNVC: 2

21 Mar 2006

5340-14-548-1236
Mounting Bracket

145481236
5010304920: RNCC: 3 | RNVC: 2

12 Dec 2005

5340-14-463-0841
Mounting Plate

144630841
CEPK215000004F19TYPEA0: RNCC: 3 | RNVC: 2

19 May 1993

5340-14-449-9990
Mounting Bracket

144499990
5000921404: RNCC: 3 | RNVC: 2

18 Sep 1991

5340-14-394-8803
Mounting Plate

143948803
16299363: RNCC: 1 | RNVC: 2
44LN00-554752M: RNCC: 3 | RNVC: 2
0554752M00: RNCC: 5 | RNVC: 2
16299363: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-533-8770
Bumper

145338770
12-702-176: RNCC: 3 | RNVC: 2
SZ12.702.176: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-520-6241
Mounting Bracket

145206241
8248-017-2: RNCC: 3 | RNVC: 2
8248-017-2: RNCC: 5 | RNVC: 2

24 May 2000

5340-14-369-9206
Angle Bracket

143699206
5892-1P: RNCC: 3 | RNVC: 9
5892-1: RNCC: 5 | RNVC: 9
5892-1: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-493-0902
Mounting Plate

144930902
NO PRIMARY REF14-493-0902: RNCC: 3 | RNVC: 2
M38527-2-01: RNCC: 5 | RNVC: 9
F300 0T 010 1000: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-387-8958
Loop Clamp

143878958
3-2607-01-80A: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-14-433-7785
Mounting Plate

144337785
NO PRIMARY REF14-433-7785: RNCC: 3 | RNVC: 2
44215-1: RNCC: 5 | RNVC: 9

9 Aug 1989

5340-14-245-1472
Detent Plunger

142451472
321A25-0062-21: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-206-9157
Loop Clamp

142069157
51113105032: RNCC: 3 | RNVC: 2
A0021-25G32: RNCC: 5 | RNVC: 2
25G32: RNCC: 5 | RNVC: 2
A0021-25G32: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-419-5417
Bail Handle

144195417
M208-61019: RNCC: 3 | RNVC: 2

21 Oct 1987

5340-14-513-2035
Mounting Bracket

145132035
T282A20T0023: RNCC: 1 | RNVC: 2
C98BP0041-021: RNCC: 3 | RNVC: 2
C97BP0041-021: RNCC: 3 | RNVC: 2
T282A20T0000: RNCC: 5 | RNVC: 2
C98BP0040-021: RNCC: 5 | RNVC: 2
C98BP0040-021: RNCC: 5 | RNVC: 2

10 Mar 1999

5340-14-366-9386
Clamping Catch

143669386
GR.54-IB: RNCC: 3 | RNVC: 2
GR54IB: RNCC: 5 | RNVC: 2

11 Dec 1980

5340-14-442-7377
Handle Grip

144427377
4904-003: RNCC: 3 | RNVC: 2
422-4904-03: RNCC: 5 | RNVC: 2
4904-003: RNCC: 5 | RNVC: 2

29 Oct 1990

5340-14-362-3716
Flush Lock

143623716
120: RNCC: 3 | RNVC: 2
15834-7: RNCC: 5 | RNVC: 2
50546-02: RNCC: 5 | RNVC: 2

19 Mar 1980

5340-14-446-0222
Mounting Plate

144460222
41-39016: RNCC: 3 | RNVC: 2
41-39016: RNCC: 5 | RNVC: 9

4 Mar 1991

5340-14-449-3609
Block Clamp

144493609
R4A717-31: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-439-8234
Mounting Plate

144398234
332A55-1247-01: RNCC: 3 | RNVC: 2

23 May 1990

5340-14-389-7276
Loop Clamp

143897276
CAP10-70-37-02: RNCC: 3 | RNVC: 9

20 Dec 1983

5340-14-425-5843
Bumper

144255843
4200-16: RNCC: 3 | RNVC: 2

9 Jul 1988

5340-14-432-1482
Corner Brace

144321482
3511-314-95731: RNCC: 3 | RNVC: 2
3511-314-95731: RNCC: 5 | RNVC: 9

24 May 1989

5340-14-489-6402
Mounting Bracket

144896402
332A58-5054-22: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-448-4614
Bail Handle

144484614
3002-17: RNCC: 3 | RNVC: 2
8921604500: RNCC: 5 | RNVC: 2

26 Jun 1991

5340-14-498-3858
Access Cover

144983858
91961129: RNCC: 3 | RNVC: 2
12-01-03-209: RNCC: 5 | RNVC: 9
F300 0T 004 9877: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-472-8979
Angle Bracket

144728979
332A85-0232-01: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-303-5521
Loop Clamp

143035521
F705-034: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-396-4954
Mounting Plate

143964954
065U20-732760G: RNCC: 3 | RNVC: 2
0732760G00: RNCC: 5 | RNVC: 2

27 Nov 1984

5340-14-418-4125
Webbing Strap

144184125
B40CAT4-4M: RNCC: 3 | RNVC: 2

21 Aug 1987

5340-14-550-4417
Loop Clamp Kit

145504417
332A07-2395-251: RNCC: 3 | RNVC: 2

20 Jun 2006

5340-14-466-1072
Bail Handle

144661072
PX.398-ZB: RNCC: 3 | RNVC: 2
PX398ZB: RNCC: 5 | RNVC: 2
91441185: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-384-3124
Angle Bracket

143843124
380300000020: RNCC: 3 | RNVC: 2
85-692-2144: RNCC: 6 | RNVC: 9

4 May 1983

5340-14-496-9072
Mounting Plate

144969072
NO PRIMARY REF14-496-9072: RNCC: 3 | RNVC: 2
270-01-89206: RNCC: 5 | RNVC: 9
F300 0T 022 2568: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-286-0170
Bumper

142860170
PA357-125M31P76: RNCC: 3 | RNVC: 9
PA357-125M31P76: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-551-0258
Expansion Plug

145510258
00124419: RNCC: 3 | RNVC: 2
W4300-55X10: RNCC: 5 | RNVC: 2

22 Aug 2006

5340-14-407-6719
Mounting Plate

144076719
I209018110-3201: RNCC: 3 | RNVC: 2
209-018-10: RNCC: 5 | RNVC: 2

27 Feb 1986

5340-14-549-9103
Mounting Bracket

145499103
2092393-001: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-473-6730
Mounting Plate

144736730
332A76-3177-00: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-449-3942
Cover Strip

144493942
MY20551-3060: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-385-5995
Angle Bracket

143855995
CRP23-666-10820: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-379-7444
Mending Plate

143797444
102192512: RNCC: 3 | RNVC: 2
0121-114: RNCC: 5 | RNVC: 2
102192512: RNCC: 5 | RNVC: 2

20 Oct 1982

5340-14-500-0837
Bumper

145000837
NO PRIMARY REF14-500-0837: RNCC: 3 | RNVC: 2
101010: RNCC: 5 | RNVC: 9
F300 0T 024 0849: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-514-5443
Loop Clamp

145145443
RPL501-300-038: RNCC: 3 | RNVC: 2

28 May 1999

5340-14-285-1630
Bail Handle

142851630
A10-20-145-95-0: RNCC: 3 | RNVC: 2
A10-20-145-95-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-383-3659
Webbing Strap

143833659
4770215390: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-298-8259
Strap Fastener Loop

142988259
31117-309: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-235-4588
Retaining Strap

142354588
NO PRIMARY REF14-235-4588: RNCC: 3 | RNVC: 2
1030-4: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-449-6049
Bridge Clamp

144496049
863-107-6: RNCC: 3 | RNVC: 9

28 Aug 1991

5340-14-461-0796
Loop Clamp

144610796
216-16PA: RNCC: 3 | RNVC: 2
216-16PA: RNCC: 5 | RNVC: 2

23 Feb 1993

5340-14-397-1240
Bolt And Spacer Kit

143971240
20320959: RNCC: 3 | RNVC: 2
20320959: RNCC: 5 | RNVC: 9

1 Dec 1984

5340-14-554-1958
Loop Clamp

145541958
507 852: RNCC: 3 | RNVC: 2
507 852: RNCC: 3 | RNVC: 2

13 Jun 2007

5340-14-401-1041
Mending Plate

144011041
603819: RNCC: 3 | RNVC: 2

29 May 1985

5340-14-392-8531
Angle Bracket

143928531
224380: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-512-7483
Plug Button

145127483
800033612: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-363-8843
Access Cover

143638843
58740004: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-369-9678
Access Cover

143699678
26248582: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-400-0292
Access Cover

144000292
408870: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-457-0133
Mounting Plate

144570133
TC549: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-14-397-5755
Anchor Strap

143975755
0000790624: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-14-543-5814
Access Cover

145435814
S621A1191101: RNCC: 3 | RNVC: 2

23 Nov 2004

5340-14-480-7857
Mounting Bracket

144807857
9203530: RNCC: 3 | RNVC: 2

29 Mar 1996

5340-14-373-8722
Access Cover

143738722
255419: RNCC: 3 | RNVC: 2
255419: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-14-450-6713
Anchor Strap

144506713
624200: RNCC: 3 | RNVC: 2

16 Oct 1991

5340-14-555-8061
Access Cover

145558061
0074901200: RNCC: 3 | RNVC: 2

14 Dec 2007

5340-14-518-0170
Access Cover

145180170
5010115066: RNCC: 3 | RNVC: 2

21 Jan 2000

5340-14-425-6045
Access Cover

144256045
13-203-210: RNCC: 3 | RNVC: 2

12 Jul 1988

5340-14-369-9505
Angle Bracket

143699505
398102070003: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-376-4698
Retaining Strap

143764698
16559388: RNCC: 3 | RNVC: 2
16559388: RNCC: 5 | RNVC: 9
16559388: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-324-6210
Angle Bracket

143246210
443467: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-406-1633
Tubular Fairlead

144061633
7700656098: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-419-5888
Retaining Strap

144195888
022-7998: RNCC: 3 | RNVC: 9
89411025: RNCC: 5 | RNVC: 2
0227998: RNCC: 5 | RNVC: 9

21 Oct 1987

5340-14-435-0799
Rod End Connector

144350799
853-600-085-0: RNCC: 3 | RNVC: 2

18 Oct 1989

5340-14-338-4891
Control Rod

143384891
341A25-1161-21: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-529-1574
Mounting Plate

145291574
457-12402-000: RNCC: 3 | RNVC: 2

13 Mar 2002

5340-14-391-3429
Mortise Lock Set

143913429
04-03-077: RNCC: 3 | RNVC: 2

1 Mar 1984

5340-14-465-2888
Mounting Plate

144652888
365A68-2616-34: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-490-2970
Beam Gripping Clamp

144902970
J05085-03-0400P013: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-447-2805
Angle Bracket

144472805
365A87-3032-25: RNCC: 3 | RNVC: 2

15 May 1991

5340-14-406-4624
Cover Strip

144064624
FD3C210-273: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-445-0092
Mounting Bracket

144450092
NO PRIMARY REF14-445-0092: RNCC: 3 | RNVC: 2
827691: RNCC: 5 | RNVC: 9

31 Jan 1991

5340-14-464-2546
Mounting Plate

144642546
30110-020: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-284-0263
Bumper

142840263
NO PRIMARY REF14-284-0263: RNCC: 3 | RNVC: 2
19414642: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-284-2643
Access Cover

142842643
78653-769: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-389-1971
Rod End Connector

143891971
321A22-0582-21: RNCC: 3 | RNVC: 2
85-692-1786: RNCC: 6 | RNVC: 9

29 Nov 1983

5340-14-306-2683
Access Cover

143062683
NO PRIMARY REF14-306-2683: RNCC: 3 | RNVC: 2
105337: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-543-1334
Mounting Bracket

145431334
SKB164: RNCC: 3 | RNVC: 2

26 Aug 2004

5340-14-555-2868
Mounting Plate

145552868
56951079AA: RNCC: 3 | RNVC: 2

22 Oct 2007

5340-14-519-7852
Loop Clamp

145197852
63376: RNCC: 3 | RNVC: 2

5 Apr 2000

5340-14-273-5947
Loop Clamp

142735947
NO PRIMARY REF14-273-5947: RNCC: 3 | RNVC: 2
9562841060: RNCC: 5 | RNVC: 2
13333M20: RNCC: 5 | RNVC: 9
13333M20: RNCC: 5 | RNVC: 9
85-648-5983: RNCC: 6 | RNVC: 9

1 Jan 1971

5340-14-354-3535
Tubular Fairlead

143543535
100SP7-0102: RNCC: 3 | RNVC: 2

31 Jan 1979

5340-14-348-0219
Loop Clamp

143480219
HY182-79: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-520-5061
Arched Cushion

145205061
MAT169-0012F22DE9: RNCC: 3 | RNVC: 2

19 May 2000

5340-14-312-1825
Loop Clamp

143121825
55213-025ACL: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-549-8663
Angle Bracket

145498663
2092497-001: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-477-4299
Clamping Catch

144774299
T258-005: RNCC: 3 | RNVC: 2

30 Aug 1995

5340-14-445-4942
Mounting Bracket

144454942
ST406M11P55-13: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-14-553-0845
Mounting Bracket

145530845
273E468-00: RNCC: 3 | RNVC: 2

28 Feb 2007

5340-14-482-9206
Pipe Hanger

144829206
78731-070-100: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-426-0082
Loop Clamp

144260082
89-99-0662: RNCC: 3 | RNVC: 2

28 Jul 1988

5340-14-449-8254
Retaining Band

144498254
437-02-001: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-14-495-6469
Mounting Plate

144956469
L23232-17: RNCC: 3 | RNVC: 2
F300 0T 019 5749: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-376-7950
Plug Button

143767950
78680-100066: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-438-3675
Mounting Plate

144383675
0837-0028: RNCC: 3 | RNVC: 2
89416219: RNCC: 5 | RNVC: 2

14 Mar 1990

5340-14-505-3471
Protection Bellows

145053471
V6-1247: RNCC: 3 | RNVC: 2
FRUV6-1247: RNCC: 5 | RNVC: 9

18 Mar 1998

5340-14-389-2055
Pipe Hanger

143892055
EA1M704-29-13: RNCC: 3 | RNVC: 2
85-801-0523: RNCC: 6 | RNVC: 9

29 Nov 1983

5340-14-462-9153
Mounting Bracket

144629153
2085-02-061: RNCC: 3 | RNVC: 2
89482658: RNCC: 5 | RNVC: 2

5 May 1993

5340-14-369-3542
Bumper

143693542
055W01-576000T: RNCC: 3 | RNVC: 2
0576000T00: RNCC: 5 | RNVC: 2

17 Apr 1981

5340-14-262-3908
Retaining Strap

142623908
175-72-100: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-345-6660
Support Hook

143456660
A0140-217: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-331-7508
Retaining Band

143317508
330A22-2206-3405: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-553-0527
Runner

145530527
CCN301-133-001A1: RNCC: 3 | RNVC: 2

27 Feb 2007

5340-14-463-7383
Loop Clamp

144637383
57248: RNCC: 3 | RNVC: 2
M057248: RNCC: 5 | RNVC: 2
85-693-9184: RNCC: 6 | RNVC: 9

23 Jun 1993

5340-14-471-9313
Bow Handle

144719313
312-07960-007: RNCC: 3 | RNVC: 2

28 Sep 1994

5340-14-268-9897
Handwheel

142689897
MAT137-003F8ACIER: RNCC: 3 | RNVC: 2
553-000MA060F5-6C1: RNCC: 5 | RNVC: 2
GSM137-007F20ACIER: RNCC: 5 | RNVC: 2
GSM137-07F20ACIER: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-511-3590
Section Block Clamp

145113590
F702-24-01: RNCC: 3 | RNVC: 2

16 Dec 1998

5340-14-043-1446
Handwheel

140431446
065U20-719781E: RNCC: 3 | RNVC: 2
0719781E00: RNCC: 5 | RNVC: 2

10 Apr 1984

5340-14-327-1577
Door Hook

143271577
J36-130-140LAIT0N: RNCC: 2 | RNVC: 2
C2-140LAIT0N: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-526-4762
Pipe Hanger

145264762
78731-037-050: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-464-7340
Retaining Band

144647340
J05107-01-3100P069: RNCC: 3 | RNVC: 2

31 Aug 1993

5340-14-495-0714
Mounting Plate

144950714
125-01-110P03: RNCC: 3 | RNVC: 2
F300 0T 018 3018: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-218-0681
Loop Clamp

142180681
NO PRIMARY REF14-218-0681: RNCC: 3 | RNVC: 2
85125: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-492-8188
Access Cover

144928188
NO PRIMARY REF14-492-8188: RNCC: 3 | RNVC: 2
220762: RNCC: 5 | RNVC: 9
F300 0T 008 9275: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-401-7355
Expansion Shield

144017355
66594-3HSLM16-25: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-464-1617
Lock-Release Lever

144641617
M085-205-101A: RNCC: 3 | RNVC: 2
85-695-1081: RNCC: 6 | RNVC: 9

15 Jul 1993

5340-14-364-6683
Anchor Strap

143646683
043-11-00-006: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-14-501-0751
Mounting Plate

145010751
4372-0041: RNCC: 3 | RNVC: 2
F300 0T 025 1091: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-308-4028
Loop Clamp

143084028
E4P830-017: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-412-4974
Mounting Plate

144124974
M581-240153: RNCC: 3 | RNVC: 2
BKN240153-20: RNCC: 5 | RNVC: 2

15 Oct 1986

5340-14-455-0004
Mounting Bracket

144550004
501-990-784-0: RNCC: 3 | RNVC: 2

1 May 1992

5340-14-373-7491
Bridge Clamp

143737491
3130S73-85-852: RNCC: 3 | RNVC: 2
SE3130S-73-85.852: RNCC: 5 | RNVC: 2

13 Nov 1981

5340-14-436-2671
Access Cover

144362671
M44438-18: RNCC: 3 | RNVC: 2

12 Dec 1989

5340-14-397-7942
Angle Bracket

143977942
M4Z7101710720: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-320-1449
Access Cover

143201449
104-58-14-2: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-362-3647
Retaining Strap

143623647
23021017: RNCC: 3 | RNVC: 2
FM2-1349: RNCC: 5 | RNVC: 2

19 Mar 1980

5340-14-460-6070
Mounting Plate

144606070
160R742612: RNCC: 3 | RNVC: 2

4 Feb 1993

5340-14-470-9991
Angle Bracket

144709991
DA4C316114631: RNCC: 3 | RNVC: 2

20 Jul 1994

5340-14-222-1627
Retaining Strap

142221627
501-991-024-0: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-542-9934
Utility Access Door

145429934
5924-CF-50-1-0-0100-2/3-5: RNCC: 3 | RNVC: 9

18 Aug 2004

5340-14-285-7033
Friction Catch

142857033
852-50X11: RNCC: 3 | RNVC: 9
85-694-5171: RNCC: 6 | RNVC: 9

1 Jan 1972

5340-14-528-2631
Mounting Bracket

145282631
21224524-00: RNCC: 3 | RNVC: 2
21224524-7: RNCC: 5 | RNVC: 2

16 Jan 2002

5340-14-375-4928
Access Cover

143754928
G700-7: RNCC: 3 | RNVC: 2
72539: RNCC: 5 | RNVC: 2
G700-7: RNCC: 5 | RNVC: 9
85-691-5623: RNCC: 6 | RNVC: 9

26 Feb 1982

5340-14-330-9702
Rod End Connector

143309702
M208-29027: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-431-9549
Bumper

144319549
21492-937-1: RNCC: 3 | RNVC: 2
99053864: RNCC: 5 | RNVC: 2
21492-937: RNCC: 5 | RNVC: 2

18 May 1989

5340-14-551-8075
Mounting Bracket

145518075
21240881-00: RNCC: 3 | RNVC: 2
21240881-5: RNCC: 5 | RNVC: 2

26 Oct 2006

5340-14-473-8436
Mounting Bracket

144738436
332A72-1743-20: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-314-9917
Angle Bracket

143149917
E4M703-18-834: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-297-4561
Rim Lock Set

142974561
J36-810ENCL0IPENED0RMT70X60G: RNCC: 2 | RNVC: 2
M1-70X60GAUCHE: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-411-2500
Loop Clamp

144112500
ASNA0021-31S32: RNCC: 1 | RNVC: 2
513153050321: RNCC: 3 | RNVC: 2
A0021-31S32: RNCC: 5 | RNVC: 2
ASNA0021-31S32: RNCC: 5 | RNVC: 2
31S32: RNCC: 5 | RNVC: 2
A0021-31S32: RNCC: 5 | RNVC: 2

6 Aug 1986

5340-14-470-8776
Mounting Plate

144708776
NO PRIMARY REF14-470-8776: RNCC: 3 | RNVC: 2
431376: RNCC: 5 | RNVC: 2

13 Jul 1994

5340-14-541-4949
Bow Handle

145414949
31-60000-213-48P: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-542-0160
Bow Handle

145420160
20047-034: RNCC: 3 | RNVC: 2
502103002028A: RNCC: 3 | RNVC: 9
2 0047-034: RNCC: 5 | RNVC: 2

2 Jul 2004

5340-14-552-7529
Mounting Bracket

145527529
THNH1-992289-20: RNCC: 3 | RNVC: 2

29 Jan 2007

5340-14-330-0916
Access Cover

143300916
773-413-043FF21: RNCC: 3 | RNVC: 2
773-413-043FF21: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-362-0955
Rod End Clevis

143620955
B0262-019F14: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-257-1382
Sliding Door Track

142571382
330A21-2010-22: RNCC: 3 | RNVC: 2
330A21-2010-2200: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-254-9626
Bumper

142549626
A10-12-700-60-0: RNCC: 3 | RNVC: 2
A10-12-700-60-0: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-341-5444
Rod End Clevis

143415444
S6265-62580-304: RNCC: 3 | RNVC: 2
85-689-4332: RNCC: 6 | RNVC: 9

16 Mar 1977

5340-14-517-9259
Stand Base

145179259
97S17-20: RNCC: 3 | RNVC: 2

18 Jan 2000

5340-14-489-6235
Mounting Bracket

144896235
332A61-2332-07: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-480-3846
Retaining Strap

144803846
92 10 28: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-384-2952
Rim Lock Set

143842952
911ACAME919-6CLE11132: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-376-4970
Expansion Plug

143764970
E29584-39A: RNCC: 3 | RNVC: 2
BEX39-9B2: RNCC: 5 | RNVC: 2

28 Apr 1982

5340-14-337-9428
Access Cover

143379428
0294800300: RNCC: 3 | RNVC: 2
302-286-901P: RNCC: 5 | RNVC: 2

6 Nov 1976

5340-14-221-6366
Flush Catch Claw

142216366
369747: RNCC: 3 | RNVC: 2
368747: RNCC: 6 | RNVC: 9

1 Jan 1966

5340-14-533-8801
Cover Strip

145338801
42-250-162: RNCC: 3 | RNVC: 2
SZ42.250.162: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-396-0999
Tubular Fairlead

143960999
177227-05530: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-420-0408
Bow Handle

144200408
995G6-30: RNCC: 3 | RNVC: 2
PYC003: RNCC: 5 | RNVC: 2
3510824: RNCC: 5 | RNVC: 2

18 Nov 1987

5340-14-389-5460
Corner Brace

143895460
365A87-3034-29: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-303-8364
Control Rod

143038364
554-413-064FF8DET20BISS0LUTI0NB: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-388-9811
Plug Button

143889811
80-100126: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-338-4399
Mending Plate

143384399
321A60-9987-20: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-383-4710
Mounting Plate

143834710
02-997-200: RNCC: 3 | RNVC: 2
02-997-200: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-379-0187
Mending Plate

143790187
1698-005A603: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-489-6688
Mounting Bracket

144896688
332P64-1548-21: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-334-1546
Rod End Connector

143341546
893-47-0-010-0: RNCC: 3 | RNVC: 2

23 Apr 1976

5340-14-286-4827
Angle Bracket

142864827
341A25-1050-21: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-351-2432
Bumper

143512432
16ATH20-0022: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-372-3652
Retaining Band

143723652
D1512-820: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-236-2685
Bumper

142362685
735/30/01: RNCC: 3 | RNVC: 2
0187727K00: RNCC: 5 | RNVC: 2
735-30: RNCC: 5 | RNVC: 2
00232711: RNCC: 5 | RNVC: 9
735-30: RNCC: 5 | RNVC: 9
1934040: RNCC: 5 | RNVC: 9
368-03530-19: RNCC: 5 | RNVC: 9
62-50-735-30: RNCC: 5 | RNVC: 9
735-30: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-550-6481
Lock Key

145506481
577-06-DET-000-A: RNCC: 3 | RNVC: 2

5 Jul 2006

5340-14-551-1140
Mounting Plate

145511140
AW-51: RNCC: 3 | RNVC: 2

28 Aug 2006

5340-14-403-6124
Pipe Hanger

144036124
304-032-801-0: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-541-8640
Shelf Bracket

145418640
350A84-0052-20: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-409-5401
Control Rod

144095401
NO PRIMARY REF14-409-5401: RNCC: 3 | RNVC: 2
H301AFB18: RNCC: 5 | RNVC: 9

28 May 1986

5340-14-289-5908
Corner Brace

142895908
121E27-106-09-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-526-0340
Access Cover

145260340
103-24-208-1: RNCC: 3 | RNVC: 2
103-24-208-1: RNCC: 5 | RNVC: 2

28 Jun 2001

5340-14-396-6536
Access Cover

143966536
2266-010: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-010-0255
Cover Strip

140100255
3130S25-10-012-1: RNCC: 3 | RNVC: 2

1 Jan 1961

5340-14-296-1983
Control Rod

142961983
121E83-324-06-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-281-3078
Loop Clamp

142813078
501-779-763-0: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-283-6026
Rod End Clevis

142836026
A10-47-266-01-0: RNCC: 3 | RNVC: 2
A10-47-266-01-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-484-2526
Loop Clamp

144842526
501-729-431-0: RNCC: 3 | RNVC: 2

31 Oct 1996

5340-14-305-5243
Retaining Strap

143055243
23002606: RNCC: 3 | RNVC: 2
33-2220: RNCC: 5 | RNVC: 2
23002606-5: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-542-0262
Mounting Bracket

145420262
20051-869: RNCC: 3 | RNVC: 2
502118008029A: RNCC: 3 | RNVC: 9
2 0051-869: RNCC: 5 | RNVC: 2

2 Jul 2004

5340-14-366-3489
Mortise Lock Set

143663489
CYL450APB2C1-293: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-552-2850
Bumper

145522850
D-ZY12-75-50: RNCC: 3 | RNVC: 2

8 Dec 2006

5340-14-496-1096
Mounting Plate

144961096
084-45-010-01: RNCC: 3 | RNVC: 2
F300 0T 020 9126: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-554-6943
Mounting Plate

145546943
82391891000: RNCC: 3 | RNVC: 2

7 Aug 2007

5340-14-523-9641
Access Cover

145239641
8027128L00: RNCC: 3 | RNVC: 2

14 Feb 2001

5340-14-252-0616
Threaded Rod End

142520616
502-303-001-0: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-463-9071
Loop Clamp

144639071
F0143-009F18TAB1DE57: RNCC: 3 | RNVC: 2
MAT169-0007F13: RNCC: 3 | RNVC: 2
F0143-009F18TAB1DE60,3: RNCC: 5 | RNVC: 2

5 Jul 1993

5340-14-489-6520
Angle Bracket

144896520
332A42-1013-20: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-376-5336
Mending Plate

143765336
NO PRIMARY REF14-376-5336: RNCC: 3 | RNVC: 2
404305068: RNCC: 5 | RNVC: 9
404305068: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-041-5340
Mounting Plate

140415340
747-109-002: RNCC: 3 | RNVC: 2
747-109-002: RNCC: 5 | RNVC: 2

19 May 1999

5340-14-470-9861
Rod End Clevis

144709861
37172: RNCC: 3 | RNVC: 2
85-695-3322: RNCC: 6 | RNVC: 9

20 Jul 1994

5340-14-540-1501
Snap Hook

145401501
NO PRIMARY REF14-540-1501: RNCC: 3 | RNVC: 2
702 610: RNCC: 5 | RNVC: 2
702610: RNCC: 5 | RNVC: 2

11 Mar 2004

5340-14-522-2973
Retaining Strap

145222973
MWSEB-3-01A-RT: RNCC: 3 | RNVC: 2
18503509-2: RNCC: 5 | RNVC: 2

19 Oct 2000

5340-14-232-1010
Angle Bracket

142321010
NO PRIMARY REF14-232-1010: RNCC: 3 | RNVC: 2
M11054-13: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-531-8369
Mounting Bracket

145318369
341A82-1010-03: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-14-464-8939
Loop Clamp

144648939
PE27017-11: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-473-8664
Mounting Bracket

144738664
332V87-8012-12: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-372-1026
Anchor Strap

143721026
NO PRIMARY REF14-372-1026: RNCC: 3 | RNVC: 2
40512001: RNCC: 5 | RNVC: 9
99342700024: RNCC: 5 | RNVC: 9

1 Sep 1981

5340-14-510-3285
Mounting Bracket

145103285
NO PRIMARY REF14-510-3285: RNCC: 3 | RNVC: 2
16289: RNCC: 5 | RNVC: 9
1560AA8020473: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-497-4628
Clamping Catch

144974628
GP27-21472ZB: RNCC: 3 | RNVC: 2
10109331: RNCC: 5 | RNVC: 2
GP2721472ZB: RNCC: 5 | RNVC: 2
F300 0T 023 2211: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-441-4916
Angle Bracket

144414916
332A72-1282-20: RNCC: 3 | RNVC: 2

30 Aug 1990

5340-14-204-7193
Mounting Bracket

142047193
3130S26-21-551: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-549-8711
Mounting Bracket

145498711
2093192-001: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-410-2881
Butt Hinge

144102881
330A25-2232-00: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-14-537-5241
Mounting Plate

145375241
6501PSP110: RNCC: 3 | RNVC: 2
6501PSP110000: RNCC: 5 | RNVC: 2

3 Nov 2003

5340-14-523-5095
Handle Grip

145235095
PCS1003: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-14-542-3031
Mounting Plate

145423031
973214908: RNCC: 3 | RNVC: 2
973214908: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-521-5335
Loop Clamp

145215335
230208008: RNCC: 3 | RNVC: 2
8TX100DP80: RNCC: 5 | RNVC: 2

9 Aug 2000

5340-14-381-2486
Clamping Catch

143812486
71189: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-484-6565
Metal Grille

144846565
29402932: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-449-3759
Cover Strip

144493759
DA1N201794505A1: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-486-2570
Retaining Strap

144862570
360A13-1031-20: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-321-8230
Angle Bracket

143218230
3160S21-13-242: RNCC: 3 | RNVC: 2
85-651-4430: RNCC: 6 | RNVC: 9

1 Jan 1975

5340-14-514-9339
Pipe Hanger

145149339
78731-063-100: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-14-351-0649
Bow Handle

143510649
7-043-467: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-523-1159
Loop Clamp

145231159
PE27024-24AF: RNCC: 3 | RNVC: 2

4 Jan 2001

5340-14-467-9492
Mounting Bracket

144679492
A87379-1: RNCC: 3 | RNVC: 2

2 Feb 1994

5340-14-360-0004
Eye Hook

143600004
A11A767521210: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-14-479-5132
Mounting Bracket

144795132
23626555-4: RNCC: 3 | RNVC: 2

17 Jan 1996

5340-14-473-6897
Synchro Clamp

144736897
332V87-8053-31: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-341-8351
Access Cover

143418351
M3B701-28: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-373-8199
Rim Lock Set

143738199
NO PRIMARY REF14-373-8199: RNCC: 3 | RNVC: 2
6600-04MNFH003: RNCC: 5 | RNVC: 9

13 Nov 1981

5340-14-340-3441
Access Cover

143403441
M3C707-61-02: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-314-8049
Case Leg

143148049
523148-00: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-458-2847
Mounting Plate

144582847
TB30-25096-101: RNCC: 3 | RNVC: 2

15 Oct 1992

5340-14-555-9174
Synchro Clamp

145559174
MAT388-0051F15: RNCC: 3 | RNVC: 2

8 Jan 2008

5340-14-360-4472
Rod End Clevis

143604472
F794-14-01: RNCC: 3 | RNVC: 2

23 Nov 1979

5340-14-534-1225
Mounting Bracket

145341225
332P63-1270-07: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-512-5930
Loop Clamp

145125930
TORRO70-90/13: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-509-7484
Access Cover

145097484
2206-913-001: RNCC: 3 | RNVC: 2
2206-913-001: RNCC: 5 | RNVC: 9

4 Nov 1998

5340-14-412-8661
Webbing Strap

144128661
ST406M75A18-13: RNCC: 3 | RNVC: 2

5 Nov 1986

5340-14-305-0453
Retaining Strap

143050453
M3C707-62-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-534-1182
Mounting Bracket

145341182
332P61-6811-00: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-524-6342
Mounting Bracket

145246342
365A87-3137-00: RNCC: 3 | RNVC: 2

29 Mar 2001

5340-14-305-0477
Loop Clamp

143050477
M3E700-30-940: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-432-1481
Corner Brace

144321481
3511-314-95721: RNCC: 3 | RNVC: 2
3511-314-95721: RNCC: 5 | RNVC: 9

24 May 1989

5340-14-267-7953
Handwheel

142677953
GSM424-07F16: RNCC: 3 | RNVC: 2
553-301MA055REP18: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-455-4368
Runner

144554368
2327-11-20: RNCC: 3 | RNVC: 2
2327-11-20: RNCC: 5 | RNVC: 2
89233023: RNCC: 5 | RNVC: 2
91632531: RNCC: 5 | RNVC: 2
5000816399: RNCC: 5 | RNVC: 2

21 May 1992

5340-14-274-8455
Webbing Strap

142748455
00811516002: RNCC: 3 | RNVC: 2
00811-5-1600-2: RNCC: 5 | RNVC: 2
131K202: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-286-4741
Clamping Catch

142864741
341A24-1017-00: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-514-7790
Cable Retractor

145147790
402-0078-02: RNCC: 3 | RNVC: 2
18588085-6: RNCC: 5 | RNVC: 2

16 Jun 1999

5340-14-312-8497
Cover Strip

143128497
160-12046-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-502-3581
Mounting Plate

145023581
443 745 IND.2: RNCC: 3 | RNVC: 2

9 Dec 1997

5340-14-497-9194
Loop Holder

144979194
P002 MN: RNCC: 3 | RNVC: 2
RAQ0158: RNCC: 5 | RNVC: 2
F4 2064-P002MN: RNCC: 5 | RNVC: 2

24 Oct 1997

5340-14-327-8241
Access Cover

143278241
915-2-72-03: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-541-9796
Bow Handle

145419796
20024-246: RNCC: 3 | RNVC: 2
502118009005A: RNCC: 3 | RNVC: 9
2 0024-246: RNCC: 5 | RNVC: 2

2 Jul 2004

5340-14-330-0795
Rod End Clevis

143300795
21-19-27-1: RNCC: 3 | RNVC: 2
21-19-27-1: RNCC: 5 | RNVC: 2
85-547-5831: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-535-2914
Snap Hook

145352914
AJ514: RNCC: 3 | RNVC: 2

15 May 2003

5340-14-396-2203
Mending Plate

143962203
476329Y: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-553-2799
Mounting Plate

145532799
TTMH1109 BB07: RNCC: 3 | RNVC: 2

20 Mar 2007

5340-14-520-7756
Bumper

145207756
T537A2004308: RNCC: 3 | RNVC: 2

14 Jun 2000

5340-14-548-9902
Mounting Bracket

145489902
KTC01A 241NOM003: RNCC: 3 | RNVC: 2

28 Feb 2006

5340-14-553-7991
Retaining Bail

145537991
125 020: RNCC: 3 | RNVC: 2
125 020: RNCC: 3 | RNVC: 2

22 May 2007

5340-14-332-3638
Angle Bracket

143323638
341A25-1030-28: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-518-9812
Mounting Bracket

145189812
706234: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-323-3780
Handwheel

143233780
GSM137-018F7REP1: RNCC: 3 | RNVC: 2
000MA060R1F7: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-230-7320
Handwheel

142307320
GSM137-001F16-8C1: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-431-5802
Mounting Plate

144315802
G990265-04: RNCC: 3 | RNVC: 2

26 Apr 1989

5340-14-382-5660
Access Cover

143825660
16985421: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-402-0445
Anchor Strap

144020445
219903: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-287-0929
Retaining Strap

142870929
458403: RNCC: 3 | RNVC: 2
20458403-8: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-381-4035
Angle Bracket

143814035
227612: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-552-3736
Loop Clamp Kit

145523736
216698-1: RNCC: 3 | RNVC: 2

15 Dec 2006

5340-14-374-1226
Bail Handle

143741226
FA1R703-60950: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-386-4643
Rod End Clevis

143864643
DA1D213103461: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-502-6222
Runner

145026222
5810110900: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-366-6675
Bumper

143666675
9222: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-516-9047
Access Cover

145169047
101160651150: RNCC: 3 | RNVC: 2

21 Oct 1999

5340-14-515-3272
Mounting Bracket

145153272
3533606009: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-379-0720
Plug Button

143790720
9801P32-4003-02: RNCC: 3 | RNVC: 2
9801365A32-4003-02: RNCC: 5 | RNVC: 2

6 Sep 1982

5340-14-010-0146
Cover Strip

140100146
3130S28-02-009: RNCC: 3 | RNVC: 2

1 Jan 1961

5340-14-440-3227
Butt Hinge

144403227
332A63-1634-63: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-541-9286
Clamping Catch

145419286
36-152-160: RNCC: 3 | RNVC: 2

2 Jul 2004

5340-14-317-9984
Loop Clamp

143179984
A133-3A: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-449-7625
Loop Clamp

144497625
76442012100: RNCC: 3 | RNVC: 2
360888-00: RNCC: 5 | RNVC: 2
43500787: RNCC: 5 | RNVC: 2

6 Sep 1991

5340-14-361-5783
Handwheel

143615783
N0508-21A: RNCC: 3 | RNVC: 2
N0502-23A: RNCC: 3 | RNVC: 2
N0500-23A: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-482-9418
Pipe Hanger

144829418
78733-064-025B: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-372-5847
Quick Release Pin

143725847
NO PRIMARY REF14-372-5847: RNCC: 3 | RNVC: 2
13724: RNCC: 5 | RNVC: 9

1 Sep 1981

5340-14-399-8762
Butt Hinge

143998762
CC.404-IB: RNCC: 3 | RNVC: 2
CC404IB: RNCC: 5 | RNVC: 2
CC4041B: RNCC: 5 | RNVC: 2

11 Apr 1985

5340-14-545-9399
Shimmy Damper

145459399
2P91547-00: RNCC: 3 | RNVC: 2

30 May 2005

5340-14-434-8167
Mounting Bracket

144348167
332A31-1452-20: RNCC: 3 | RNVC: 2

4 Oct 1989

5340-14-261-7719
Bail Handle

142617719
5340-08PLATINE160: RNCC: 3 | RNVC: 2
LP033-02F3-4REP2: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-435-9656
Bow Handle

144359656
332A25-1068-13: RNCC: 3 | RNVC: 2

29 Nov 1989

5340-14-298-8251
Strap Fastener Loop

142988251
11606-042: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-512-1231
Metal Grille

145121231
21177119-9: RNCC: 3 | RNVC: 2

4 Feb 1999

5340-14-451-9784
Mounting Plate

144519784
007570010P: RNCC: 3 | RNVC: 2

17 Dec 1991

5340-14-508-6162
Protection Bellows

145086162
7700669938: RNCC: 3 | RNVC: 2

22 Sep 1998

5340-14-439-9754
Mounting Bracket

144399754
8162118: RNCC: 3 | RNVC: 2

29 Jun 1990

5340-14-527-6157
Mounting Bracket

145276157
COU001552041020: RNCC: 3 | RNVC: 2

5 Nov 2001

5340-14-330-1316
Handwheel

143301316
PT125J: RNCC: 3 | RNVC: 2
PT125: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-446-2559
Angle Bracket

144462559
093328T: RNCC: 3 | RNVC: 2

11 Mar 1991

5340-14-448-1149
Plate Spacer

144481149
0120721311: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-14-445-1645
Swivel Caster

144451645
1375INOXDIA100: RNCC: 3 | RNVC: 2
91619269: RNCC: 5 | RNVC: 2

4 Feb 1991

5340-14-307-1913
Loop Clamp

143071913
21S0701001: RNCC: 3 | RNVC: 2
21S7-33: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-554-3318
Mounting Bracket

145543318
82116725001: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-541-5262
Mounting Plate

145415262
1091571: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-488-1527
Angle Bracket

144881527
0320730550: RNCC: 3 | RNVC: 2

18 Apr 1997

5340-14-319-8906
Control Rod

143198906
140C103: RNCC: 3 | RNVC: 9

1 Jan 1975

5340-14-439-6814
Loop Clamp

144396814
20256425: RNCC: 3 | RNVC: 2
20256425: RNCC: 5 | RNVC: 9

16 May 1990

5340-14-553-3189
Mounting Plate

145533189
49181-23500: RNCC: 3 | RNVC: 2

23 Mar 2007

5340-14-474-0999
Bridge Clamp

144740999
F7987 5107-89: RNCC: 3 | RNVC: 9

25 Jan 1995

5340-14-516-8760
Mounting Plate

145168760
346-0222-4000: RNCC: 3 | RNVC: 9

20 Oct 1999

5340-14-523-3037
Bridge Clamp

145233037
9002CCP101-0003: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-457-7702
Pipe Hanger

144577702
402218A-SG10137-Z2CND17-12: RNCC: 3 | RNVC: 2

17 Sep 1992

5340-14-481-8379
Mounting Bracket

144818379
312-18482-001: RNCC: 3 | RNVC: 2

1 Jun 1996

5340-14-541-4183
Synchro Clamp

145414183
121S81-306-00-0M2: RNCC: 3 | RNVC: 2

9 Jun 2004

5340-14-473-8314
Mounting Plate

144738314
332A58-1812-20: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-442-0406
Mounting Plate

144420406
332A94-5800-10: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-418-7034
Bumper

144187034
J05107-02-2600P008: RNCC: 3 | RNVC: 2

9 Sep 1987

5340-14-476-2927
Access Cover

144762927
METREX-VALVE/MDFPM-3000-3W-REP31: RNCC: 3 | RNVC: 2
MDFPM-3000-3W-ITEM31: RNCC: 5 | RNVC: 2
EA00737: RNCC: 5 | RNVC: 2

1 Jun 1995

5340-14-536-4502
Webbing Strap

145364502
ARO9016-14: RNCC: 3 | RNVC: 2

22 Aug 2003

5340-14-483-9214
Metal Grille

144839214
TL-110: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-14-529-1525
Bumper

145291525
457-02008-000: RNCC: 3 | RNVC: 2

13 Mar 2002

5340-14-473-8396
Mounting Bracket

144738396
332A67-1950-64: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-442-0095
Mounting Plate

144420095
332P65-1400-68: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-516-8759
Mounting Plate

145168759
342-0052-4000: RNCC: 3 | RNVC: 9

20 Oct 1999

5340-14-435-3007
Mounting Plate

144353007
350A34-1023-20: RNCC: 3 | RNVC: 2

2 Nov 1989

5340-14-438-9565
Mounting Bracket

144389565
330A96-2210-10: RNCC: 3 | RNVC: 2

11 Apr 1990

5340-14-514-3441
Cable Retractor

145143441
J06012-05-7000: RNCC: 3 | RNVC: 2

12 May 1999

5340-14-398-9203
Swivel Caster

143989203
SF2-BA-050-23L: RNCC: 3 | RNVC: 2
SR250-33L: RNCC: 5 | RNVC: 2

6 Mar 1985

5340-14-502-6588
Mounting Bracket

145026588
243-44210-01: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-397-6681
Loop Clamp

143976681
133-123: RNCC: 3 | RNVC: 2
133-123: RNCC: 5 | RNVC: 9
85-692-8378: RNCC: 6 | RNVC: 9

14 Dec 1984

5340-14-325-7188
Angle Bracket

143257188
M3C707-17-814: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-527-0208
Mounting Plate

145270208
332A088323-20: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-14-437-5151
Retaining Strap

144375151
1BT05-03-07-020: RNCC: 3 | RNVC: 2

5 Feb 1990

5340-14-427-2132
Angle Bracket

144272132
46AM101-01-0002: RNCC: 3 | RNVC: 2

6 Oct 1988

5340-14-290-8909
Mounting Plate

142908909
NO PRIMARY REF14-290-8909: RNCC: 3 | RNVC: 2
CR9526: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-378-0447
Loop Clamp

143780447
NO PRIMARY REF14-378-0447: RNCC: 3 | RNVC: 2
903152800: RNCC: 5 | RNVC: 2
52431440: RNCC: 5 | RNVC: 9

20 Jul 1982

5340-14-389-4758
Mounting Bracket

143894758
365A61-3524-00: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-554-1372
Mounting Bracket

145541372
352 126: RNCC: 3 | RNVC: 2
352 126: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-532-1347
Mounting Plate

145321347
5010559907: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-14-467-9703
Shelf Bracket

144679703
1075715P00: RNCC: 3 | RNVC: 2

2 Feb 1994

5340-14-336-5097
Webbing Strap

143365097
190256: RNCC: 3 | RNVC: 2

14 Aug 1976

5340-14-510-1127
Access Cover

145101127
F293-004RS1: RNCC: 3 | RNVC: 2
1560AA8007682: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-531-2130
Mounting Bracket

145312130
341A54-1083-01: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-473-6503
Cover Strip

144736503
332A25-1332-20: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-322-6107
Rod End Clevis

143226107
3160S73-74-535: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-330-7955
Handwheel

143307955
A0182-0057F11: RNCC: 3 | RNVC: 2
A0182-057F11: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-510-1168
Access Cover

145101168
F294-14RS1: RNCC: 3 | RNVC: 2
1560AA8008192: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-438-1035
Plug Button

144381035
NSA939511-03: RNCC: 3 | RNVC: 2
NSA939511-03: RNCC: 5 | RNVC: 2

7 Mar 1990

5340-14-366-1963
Loop Clamp

143661963
51369205038: RNCC: 3 | RNVC: 2
21A38: RNCC: 5 | RNVC: 2
85-689-8645: RNCC: 6 | RNVC: 9

4 Nov 1980

5340-14-474-2375
Access Cover

144742375
2262-211D636: RNCC: 3 | RNVC: 2
2262-211D636: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-14-341-1867
Access Cover

143411867
M3B702-33-02: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-412-2096
Detent Plunger

144122096
332A21-1392-21: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-511-6288
Loop Clamp

145116288
75109-50MJ: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-345-4124
Bumper

143454124
Z1720-216: RNCC: 3 | RNVC: 2
Z1720-216: RNCC: 3 | RNVC: 9
Z1-72-02-16: RNCC: 5 | RNVC: 9

5 Oct 1977

5340-14-485-5038
Angle Bracket

144855038
A4825653: RNCC: 3 | RNVC: 2
A48256-53: RNCC: 5 | RNVC: 2

29 Jan 1997

5340-14-458-7664
Mounting Bracket

144587664
MN02/09-49: RNCC: 3 | RNVC: 2
MN04/09-49: RNCC: 5 | RNVC: 2

3 Nov 1992

5340-14-419-6887
Angle Bracket

144196887
ETD024050613020: RNCC: 3 | RNVC: 2
85-693-6348: RNCC: 6 | RNVC: 9

3 Nov 1987

5340-14-371-8304
Angle Bracket

143718304
NO PRIMARY REF14-371-8304: RNCC: 3 | RNVC: 2
RF72-1011: RNCC: 5 | RNVC: 2

5 Aug 1981

5340-14-320-8513
Plug Button

143208513
M3R707-074: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-460-9970
Angle Bracket

144609970
5000995251: RNCC: 3 | RNVC: 2

17 Feb 1993

5340-14-509-0179
Lock Key

145090179
CLEF REMONTAGE: RNCC: 3 | RNVC: 2

14 Oct 1998

5340-14-541-4807
Mounting Bracket

145414807
19221381: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-520-2477
Lock Bolt

145202477
RMA36P: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-482-9203
Pipe Hanger

144829203
78731-057-100: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-392-7280
Bow Handle

143927280
1-9235-012: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-389-4574
Mending Plate

143894574
365A55-3111-00: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-546-3098
Mounting Bracket

145463098
3-85-31-02-113-1: RNCC: 3 | RNVC: 2

23 Jun 2005

5340-14-226-5216
Rod End Connector

142265216
NO PRIMARY REF14-226-5216: RNCC: 3 | RNVC: 2
41182: RNCC: 5 | RNVC: 9
062057712: RNCC: 5 | RNVC: 9
57712: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-269-4219
Furniture Cup

142694219
NT75-02A0UT54-13: RNCC: 2 | RNVC: 2
NO PRIMARY REF14-269-4219: RNCC: 3 | RNVC: 2
NT75-02A0UT54-13: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-404-3897
Mending Plate

144043897
NO PRIMARY REF14-404-3897: RNCC: 3 | RNVC: 2
P4H020023-00: RNCC: 5 | RNVC: 9

30 Oct 1985

5340-14-511-8105
Clamping Catch

145118105
5-100934-7: RNCC: 3 | RNVC: 2
2990-65-0000012: RNCC: 6 | RNVC: 9

26 Jan 1999

5340-14-285-2189
Retaining Strap

142852189
A10-90-141-69-0: RNCC: 3 | RNVC: 2
A10-90-141-69-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-452-0461
Mounting Bracket

144520461
A71928-3: RNCC: 3 | RNVC: 2

18 Dec 1991

5340-14-339-4662
Retaining Strap

143394662
M3C230-26-07: RNCC: 3 | RNVC: 2
M3C230-26-07: RNCC: 8 | RNVC: 2

18 Jan 1977

5340-14-332-8658
Lock-Release Lever

143328658
T20-13G301: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-503-1119
Loop Clamp

145031119
752-40AU4G: RNCC: 3 | RNVC: 2
752D40: RNCC: 5 | RNVC: 2
85-100-4960: RNCC: 6 | RNVC: 9

7 Jan 1998

5340-14-314-3925
Buckle

143143925
34209-150-025: RNCC: 3 | RNVC: 2
AB62: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-399-0963
Rigid Caster

143990963
16299589: RNCC: 1 | RNVC: 2
A01074-01-2000P003: RNCC: 3 | RNVC: 2
0203571F00: RNCC: 5 | RNVC: 2
16299589: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-531-7574
Mounting Bracket

145317574
303-118-301-0: RNCC: 3 | RNVC: 2

16 Sep 2002

5340-14-497-2650
Cane Bolt

144972650
702-714400-000-0: RNCC: 3 | RNVC: 2
F300 0T 022 9165: RNCC: 6 | RNVC: 9

15 Oct 1997

Load More Results