What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 136 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 136 of 446

5340-14-476-8550
Lock Bolt

144768550
3802612: RNCC: 3 | RNVC: 2
18512589-6: RNCC: 5 | RNVC: 2
3802612: RNCC: 5 | RNVC: 2

5 Jul 1995

5340-14-497-1527
Mounting Bracket

144971527
212544-0: RNCC: 3 | RNVC: 2
F300 0T 022 7150: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-539-7333
Loop Clamp

145397333
3-2606-8D: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-14-503-1197
Pipe Hanger

145031197
78733-032-025A: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-347-4423
Retaining Strap

143474423
0274603130: RNCC: 3 | RNVC: 2
302-134-702P: RNCC: 5 | RNVC: 2

1 Mar 1978

5340-14-328-0695
Detent Plunger

143280695
T18-13P3: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-390-1575
Access Cover

143901575
366A61-3127-00: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-272-8291
Loop Clamp

142728291
5701-16: RNCC: 3 | RNVC: 2
610-01G: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-473-6662
Mounting Plate

144736662
332A63-4350-00: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-010-0338
Loop Clamp

140100338
3130S47-03-130: RNCC: 3 | RNVC: 2

1 Jan 1961

5340-14-446-9684
Access Cover

144469684
21351019-00: RNCC: 3 | RNVC: 2

19 Apr 1991

5340-14-404-0413
Retaining Strap

144040413
366A25-1092-21: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-541-8265
Mounting Bracket

145418265
88179-1135: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-527-2750
Access Cover

145272750
ST159-2M313R702: RNCC: 3 | RNVC: 2

17 Oct 2001

5340-14-341-1730
Pipe Hanger

143411730
M3C702-36: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-272-4853
Bow Handle

142724853
NO PRIMARY REF14-272-4853: RNCC: 3 | RNVC: 1
10AIS0: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-389-5455
Sliding Door Track

143895455
365A87-3033-1601: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-271-0168
Retaining Strap

142710168
3160S72-22-039: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-296-0704
Webbing Strap

142960704
EL20-10: RNCC: 3 | RNVC: 2
EL20-10: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-487-5559
Mounting Plate

144875559
78785-050-13F: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-470-0474
Bow Handle

144700474
A02645-01-0000P004: RNCC: 3 | RNVC: 2

25 May 1994

5340-14-460-4580
Handle Grip

144604580
11-100-26: RNCC: 3 | RNVC: 2

27 Jan 1993

5340-14-460-1836
Mounting Bracket

144601836
LN214-001FIA08L03: RNCC: 3 | RNVC: 2
RAB0251: RNCC: 5 | RNVC: 2

14 Jan 1993

5340-14-466-5691
Crank Handle

144665691
630-23: RNCC: 3 | RNVC: 2

16 Nov 1993

5340-14-533-5998
Mounting Bracket

145335998
708010S120-00A: RNCC: 3 | RNVC: 2

12 Feb 2003

5340-14-308-9247
Access Cover

143089247
188471: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-454-6772
Access Cover

144546772
333107: RNCC: 3 | RNVC: 2
333107: RNCC: 5 | RNVC: 9

9 Apr 1992

5340-14-542-3028
Mounting Plate

145423028
973017808: RNCC: 3 | RNVC: 2
973017808: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-425-0854
Mending Plate

144250854
529563: RNCC: 3 | RNVC: 2

16 Jun 1988

5340-14-391-9688
Rod End Clevis

143919688
MBEU41749: RNCC: 3 | RNVC: 2
035193: RNCC: 5 | RNVC: 2

21 Mar 1984

5340-14-488-4801
Access Cover

144884801
8005370F00: RNCC: 3 | RNVC: 2

14 May 1997

5340-14-467-0173
Access Cover

144670173
462008AA: RNCC: 3 | RNVC: 2

15 Dec 1993

5340-14-458-0033
Webbing Strap

144580033
396630: RNCC: 3 | RNVC: 2
396630: RNCC: 5 | RNVC: 9

2 Oct 1992

5340-14-526-3766
Access Cover

145263766
47011763: RNCC: 3 | RNVC: 9

25 Jul 2001

5340-14-533-2411
Access Cover

145332411
P106580VD: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-430-6275
Retaining Strap

144306275
PM1A526164001A1: RNCC: 3 | RNVC: 2
PM1A526164001A1: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-327-0863
Access Cover

143270863
444456: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-539-7680
Access Cover

145397680
019160J: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-14-396-6026
Rod End Clevis

143966026
67357: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-506-1368
Access Cover

145061368
801903729: RNCC: 3 | RNVC: 2
1774111510: RNCC: 5 | RNVC: 9

8 Apr 1998

5340-14-512-0362
Access Cover

145120362
0005410: RNCC: 3 | RNVC: 2
101557: RNCC: 3 | RNVC: 2

3 Feb 1999

5340-14-460-9910
Anchor Strap

144609910
5000916849: RNCC: 3 | RNVC: 2

17 Feb 1993

5340-14-402-6492
Access Cover

144026492
167106: RNCC: 3 | RNVC: 2

19 Jul 1985

5340-14-531-6187
Handwheel

145316187
TEG002010500: RNCC: 3 | RNVC: 2

4 Sep 2002

5340-14-375-8132
Access Cover

143758132
16293220: RNCC: 3 | RNVC: 2
16293220: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-506-9410
Access Cover

145069410
10441059: RNCC: 3 | RNVC: 2

27 May 1998

5340-14-288-4795
Casement Fastener

142884795
63674: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-317-7042
Rod End Connector

143177042
466-8M16P159PASADR0ITE: RNCC: 3 | RNVC: 2
466-8M16P159PASADR0ITE: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-279-5792
Rod End Clevis

142795792
948569: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-286-5246
Access Cover

142865246
79031832: RNCC: 3 | RNVC: 2
79031832: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-517-7817
Access Cover

145177817
46828550: RNCC: 3 | RNVC: 2

13 Jan 2000

5340-14-455-0916
Rod End Clevis

144550916
AT004PE008000A: RNCC: 3 | RNVC: 9

1 May 1992

5340-14-455-7403
Access Cover

144557403
4772238600: RNCC: 3 | RNVC: 2
5044574: RNCC: 5 | RNVC: 9

11 Jun 1992

5340-14-375-2841
Anchor Strap

143752841
10902: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-445-2567
Doorknob

144452567
51259: RNCC: 3 | RNVC: 2

6 Feb 1991

5340-14-423-9336
Access Cover

144239336
ZF05938303: RNCC: 3 | RNVC: 2

5 May 1988

5340-14-443-1396
Bumper

144431396
DA2C204726105: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-14-461-9809
Section Block Clamp

144619809
T700A7170022102: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-402-0852
Access Cover

144020852
400775: RNCC: 3 | RNVC: 2
BGE400775: RNCC: 5 | RNVC: 2

26 Jun 1985

5340-14-549-8311
Angle Bracket

145498311
2092580: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-452-1929
Access Cover

144521929
7007524: RNCC: 3 | RNVC: 2
0124059: RNCC: 5 | RNVC: 2

3 Jan 1992

5340-14-310-2982
Retaining Strap

143102982
466-7M98P422: RNCC: 3 | RNVC: 2
466-7M98P422: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-529-8832
Rod End Clevis

145298832
DA8324: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-428-3263
Mounting Plate

144283263
55758: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-321-6666
Angle Bracket

143216666
0235550270: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-546-2027
Cover Strip

145462027
06S0132102: RNCC: 3 | RNVC: 2

15 Jun 2005

5340-14-501-0066
Bow Handle

145010066
10022043: RNCC: 3 | RNVC: 2
F300 0T 025 0360: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-505-3498
Expansion Plug

145053498
E75503598: RNCC: 3 | RNVC: 2
V75503598: RNCC: 5 | RNVC: 9

18 Mar 1998

5340-14-536-8309
Mounting Plate

145368309
Z2099: RNCC: 3 | RNVC: 2

17 Sep 2003

5340-14-479-2313
Pipe Hanger

144792313
85352-ABG: RNCC: 3 | RNVC: 2
85352-ABG: RNCC: 5 | RNVC: 2
85352-ABG: RNCC: 5 | RNVC: 9

19 Dec 1995

5340-14-506-5850
Angle Bracket

145065850
NNP5340838309332: RNCC: 3 | RNVC: 9

29 Apr 1998

5340-14-550-9156
Angle Bracket

145509156
RA1B701732221N1: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-517-2138
Loop Clamp

145172138
2106014505: RNCC: 3 | RNVC: 2
9560171000: RNCC: 5 | RNVC: 2

17 Nov 1999

5340-14-479-2154
Angle Bracket

144792154
LA01PD030003: RNCC: 3 | RNVC: 9
LA01PD030003: RNCC: 5 | RNVC: 2

19 Dec 1995

5340-14-522-1192
Angle Bracket

145221192
56125988A: RNCC: 3 | RNVC: 2

4 Oct 2000

5340-14-359-0703
Pipe Hanger

143590703
A11A221172210: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-488-2563
Loop Clamp

144882563
0320771680: RNCC: 3 | RNVC: 2

23 Apr 1997

5340-14-512-3057
Mounting Bracket

145123057
3BT01473AAAA: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-14-426-4702
Bumper

144264702
BFP00841: RNCC: 3 | RNVC: 2

1 Sep 1988

5340-14-230-5307
Loop Clamp

142305307
0202117370: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-363-7394
Angle Bracket

143637394
A11A211178050: RNCC: 3 | RNVC: 2

6 Jul 1980

5340-14-040-0484
Retaining Strap

140400484
0249921060: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-527-7444
Mounting Bracket

145277444
705450: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-14-543-7492
Mounting Plate

145437492
4460198: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-14-473-0734
Mounting Bracket

144730734
2MD110N53: RNCC: 3 | RNVC: 9

7 Dec 1994

5340-14-507-9974
Mounting Bracket

145079974
4773102410: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-455-7740
Angle Bracket

144557740
427602050007: RNCC: 3 | RNVC: 2
5044833: RNCC: 5 | RNVC: 9

11 Jun 1992

5340-14-552-8350
Access Cover

145528350
611944: RNCC: 3 | RNVC: 2

6 Feb 2007

5340-14-336-7066
Rod End Clevis

143367066
196178: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-425-8918
Angle Bracket

144258918
059116B01TRA: RNCC: 3 | RNVC: 2
059116B: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-14-559-2981
Utility Resilient Mount

145592981
10594032: RNCC: 3 | RNVC: 2

17 Dec 2008

5340-14-425-9325
Plug Button

144259325
640044: RNCC: 3 | RNVC: 2

28 Jul 1988

5340-14-508-0705
Mounting Plate

145080705
4773120350: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-485-0662
Mounting Bracket

144850662
332A32-3373-00: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-14-405-3689
Access Cover

144053689
NO PRIMARY REF14-405-3689: RNCC: 3 | RNVC: 2
15048-4: RNCC: 5 | RNVC: 9

27 Nov 1985

5340-14-324-4689
Loop Clamp

143244689
3-2606-01-50: RNCC: 3 | RNVC: 2
3-2606-01-50A: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-520-0902
Mounting Bracket

145200902
2L85-137: RNCC: 3 | RNVC: 2

10 May 2000

5340-14-462-1745
Access Cover

144621745
MAT464-0010-01CL000C0175: RNCC: 3 | RNVC: 2

13 Apr 1993

5340-14-483-3653
Runner

144833653
EPA211G0015: RNCC: 3 | RNVC: 2
401226: RNCC: 3 | RNVC: 2
401226-001: RNCC: 5 | RNVC: 9

5 Sep 1996

5340-14-437-7341
Mounting Plate

144377341
160G882293-11: RNCC: 3 | RNVC: 2

14 Feb 1990

5340-14-363-4978
Rim Lock Set

143634978
NO PRIMARY REF14-363-4978: RNCC: 3 | RNVC: 2
06600023FH008: RNCC: 5 | RNVC: 9

9 May 1980

5340-14-549-6416
Utility Access Door

145496416
JCB 10 137-305: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-14-529-2013
Angle Bracket

145292013
457-11967-000: RNCC: 3 | RNVC: 2

15 Mar 2002

5340-14-533-2985
Loop Clamp

145332985
167-060-010: RNCC: 3 | RNVC: 2
CAE00977: RNCC: 5 | RNVC: 2

29 Jan 2003

5340-14-517-5558
Butt Hinge

145175558
38963PA04-1830: RNCC: 3 | RNVC: 2
38963PA04: RNCC: 5 | RNVC: 2

5 Jan 2000

5340-14-297-7237
Detent Plunger

142977237
NO PRIMARY REF14-297-7237: RNCC: 3 | RNVC: 2
291: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-385-4496
Rod End Clevis

143854496
4A525-10-01: RNCC: 3 | RNVC: 2
4A-525-10-01: RNCC: 5 | RNVC: 2
85-692-3300: RNCC: 6 | RNVC: 9

26 Jul 1983

5340-14-503-0320
Plug Button

145030320
212-15008-13: RNCC: 3 | RNVC: 2

22 Dec 1997

5340-14-330-4063
Access Cover

143304063
0915-105-000: RNCC: 3 | RNVC: 2
0915-105: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-442-7800
Arched Cushion

144427800
BA30089050-27: RNCC: 2 | RNVC: 2

5 Nov 1990

5340-14-344-4593
Bumper

143444593
EA1M705-46-01: RNCC: 3 | RNVC: 2

10 Aug 1977

5340-14-468-4908
Mounting Bracket

144684908
2089-10121: RNCC: 3 | RNVC: 2

3 Mar 1994

5340-14-257-1380
Sliding Door Track

142571380
330A21-2010-20: RNCC: 3 | RNVC: 2
330A21-2010-2000: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-537-0815
Loop Clamp

145370815
ASNA0021-11N20: RNCC: 1 | RNVC: 2
51300005020: RNCC: 3 | RNVC: 2
A0021-11N20: RNCC: 5 | RNVC: 2
11N20: RNCC: 5 | RNVC: 2
A0021-11N20: RNCC: 5 | RNVC: 2

24 Sep 2003

5340-14-413-0826
Access Cover

144130826
9760-300: RNCC: 3 | RNVC: 9

26 Nov 1986

5340-14-217-9092
Cover Strip

142179092
3160S25-22-033: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-232-0743
Rod End Clevis

142320743
M3B216-15-852: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-518-3776
Mounting Plate

145183776
5156: RNCC: 3 | RNVC: 2
5156: RNCC: 5 | RNVC: 2
SN-63: RNCC: 5 | RNVC: 2
FES5156: RNCC: 5 | RNVC: 9

2 Feb 2000

5340-14-427-7731
Plug Button

144277731
354-146B: RNCC: 3 | RNVC: 9

9 Nov 1988

5340-14-524-5794
Plug Button

145245794
LOT G413-1X325: RNCC: 3 | RNVC: 2
SYB2317: RNCC: 5 | RNVC: 2

27 Mar 2001

5340-14-338-7486
Access Cover

143387486
NO PRIMARY REF14-338-7486: RNCC: 3 | RNVC: 2
7701007153: RNCC: 5 | RNVC: 2
075814R: RNCC: 5 | RNVC: 9
7701007153: RNCC: 5 | RNVC: 9

17 Dec 1976

5340-14-355-3073
Anchor Strap

143553073
NO PRIMARY REF14-355-3073: RNCC: 3 | RNVC: 2
50-350-205-59: RNCC: 5 | RNVC: 9

19 Mar 1979

5340-14-311-9786
Access Cover

143119786
1031070902: RNCC: 3 | RNVC: 2
1031051908: RNCC: 5 | RNVC: 2
DR1-908D: RNCC: 5 | RNVC: 2
720433: RNCC: 5 | RNVC: 9
DAH1031070902: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-549-8251
Angle Bracket

145498251
2092743-002: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-371-2615
Loop Clamp

143712615
NO PRIMARY REF14-371-2615: RNCC: 3 | RNVC: 2
67729: RNCC: 5 | RNVC: 9

5 Aug 1981

5340-14-531-2263
Mounting Bracket

145312263
341A66-6128-24: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-399-0477
Mending Plate

143990477
NO PRIMARY REF14-399-0477: RNCC: 3 | RNVC: 2
46341: RNCC: 5 | RNVC: 9
D10-46341: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-383-3741
Access Cover

143833741
3511 191 36771: RNCC: 3 | RNVC: 2
3511-191-36771: RNCC: 5 | RNVC: 2

11 Apr 1983

5340-14-340-7853
Runner

143407853
401MA031-E-41: RNCC: 3 | RNVC: 2

8 Feb 2001

5340-14-461-0692
Retaining Strap

144610692
66830-6: RNCC: 3 | RNVC: 2

22 Feb 1993

5340-14-487-4967
Retaining Strap

144874967
25342981: RNCC: 3 | RNVC: 2
2-534298-1: RNCC: 5 | RNVC: 2

10 Apr 1997

5340-14-552-3239
Mounting Bracket

145523239
E-19-1: RNCC: 3 | RNVC: 2

13 Dec 2006

5340-14-461-8573
Access Cover

144618573
23214245-8: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-465-6807
Mounting Plate

144656807
GM92004-1: RNCC: 3 | RNVC: 2
91711013: RNCC: 5 | RNVC: 2
GM92004-1: RNCC: 5 | RNVC: 2
GM92004-1: RNCC: 5 | RNVC: 9
GM92004-1: RNCC: 5 | RNVC: 9

6 Oct 1993

5340-14-433-2938
Angle Bracket

144332938
320-563-801-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-14-469-8471
Webbing Strap

144698471
01815-SR1 2,5ML: RNCC: 3 | RNVC: 2

11 May 1994

5340-14-218-6082
Loop Clamp

142186082
2-02758: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-479-2667
Access Cover

144792667
23627984-7: RNCC: 3 | RNVC: 2

3 Jan 1996

5340-14-433-4271
Flush Catch Claw

144334271
0803627D00: RNCC: 3 | RNVC: 2

25 Jul 1989

5340-14-411-6950
Magnetic Catch

144116950
16-7-3388: RNCC: 3 | RNVC: 2
8921625526: RNCC: 5 | RNVC: 2

27 Aug 1986

5340-14-421-2846
Rod End Clevis

144212846
006613010P: RNCC: 3 | RNVC: 2

14 Jan 1988

5340-14-263-1325
Control Rod

142631325
2-05364: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-536-6847
Mounting Bracket

145366847
47149230: RNCC: 3 | RNVC: 2

10 Sep 2003

5340-14-479-2688
Mounting Plate

144792688
400-354-19: RNCC: 3 | RNVC: 2
00008496: RNCC: 5 | RNVC: 2

3 Jan 1996

5340-14-348-7827
Loop Clamp

143487827
3-2606-02-50A: RNCC: 3 | RNVC: 2
3-2606-02-50A: RNCC: 5 | RNVC: 9
3-2606-02-50A32D: RNCC: 5 | RNVC: 9
3-2606-02-50: RNCC: 5 | RNVC: 9

19 Apr 1978

5340-14-408-1078
Retaining Band

144081078
NO PRIMARY REF14-408-1078: RNCC: 3 | RNVC: 2
89409480: RNCC: 5 | RNVC: 2
13473: RNCC: 5 | RNVC: 9
25-6-4A1-04: RNCC: 5 | RNVC: 9

19 Mar 1986

5340-14-218-5866
Loop Clamp

142185866
NO PRIMARY REF14-218-5866: RNCC: 3 | RNVC: 2
694000-2: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-455-6919
Permanent Magnet

144556919
C16-9: RNCC: 3 | RNVC: 2
C169: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-325-6384
Pipe Hanger

143256384
121E52-314-08-2: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-243-7929
Angle Bracket

142437929
NO PRIMARY REF14-243-7929: RNCC: 3 | RNVC: 2
613143: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-537-3484
Retaining Band

145373484
MAT169-0029F17/F18D73A76,1: RNCC: 3 | RNVC: 2

21 Oct 2003

5340-14-549-6216
Mounting Plate

145496216
JCB 10 135-732: RNCC: 3 | RNVC: 2

24 Apr 2006

5340-14-502-9515
Dashpot

145029515
825-2-80-19: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-517-8857
Access Cover

145178857
162972: RNCC: 3 | RNVC: 2
IF230-250: RNCC: 3 | RNVC: 9
117937: RNCC: 5 | RNVC: 2

17 Jan 2000

5340-14-534-5276
Handwheel

145345276
13-166-160: RNCC: 3 | RNVC: 1
13-166-160-14: RNCC: 3 | RNVC: 2

26 Mar 2003

5340-14-365-1781
Expansion Plug

143651781
NO PRIMARY REF14-365-1781: RNCC: 3 | RNVC: 2
ZC9595280U: RNCC: 5 | RNVC: 2
3912000: RNCC: 5 | RNVC: 9

19 Sep 1980

5340-14-383-3721
Access Cover

143833721
3511 191 32542: RNCC: 3 | RNVC: 2
3511 191 32542: RNCC: 5 | RNVC: 2
3511-191-32542: RNCC: 5 | RNVC: 2

11 Apr 1983

5340-14-549-8490
Mounting Plate

145498490
2092130-001: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-031-3512
Clamping Catch

140313512
GE14-4788ZB: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-468-2866
Retaining Clip

144682866
12-840-100: RNCC: 3 | RNVC: 2
12-840-100: RNCC: 5 | RNVC: 9

16 Feb 1994

5340-14-388-5472
Rod End Clevis

143885472
4A2721-52-03: RNCC: 3 | RNVC: 2
4A-2721-52-03: RNCC: 5 | RNVC: 2
85-800-9861: RNCC: 6 | RNVC: 9

3 Nov 1983

5340-14-542-4138
Mounting Plate

145424138
5302835-040-01: RNCC: 3 | RNVC: 2

9 Jul 2004

5340-14-455-5713
Plug Button

144555713
W1-522: RNCC: 3 | RNVC: 2
91617262: RNCC: 5 | RNVC: 2

28 May 1992

5340-14-553-0404
Swivel Caster

145530404
TP3BA080-23L: RNCC: 3 | RNVC: 2

26 Feb 2007

5340-14-237-5082
Loop Clamp

142375082
321A41-0144-00: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-554-7490
Bail Handle

145547490
PR.302-AIB: RNCC: 3 | RNVC: 2
PR302AIB: RNCC: 5 | RNVC: 2

8 Aug 2007

5340-14-236-5624
Rod End Clevis

142365624
321A42-0018-20: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-257-1277
Loop Clamp

142571277
330A55-0458-23: RNCC: 3 | RNVC: 2
330A55-0458-2300: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-360-0669
Pipe Hanger

143600669
TY3G1S: RNCC: 3 | RNVC: 2
12230770-9: RNCC: 5 | RNVC: 2
13942944-3: RNCC: 5 | RNVC: 2
2513 708 98227: RNCC: 5 | RNVC: 2
2513-708-98227: RNCC: 5 | RNVC: 2

31 Oct 1979

5340-14-549-9104
Mounting Bracket

145499104
2092394-001: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-377-9378
Control Rod

143779378
710035-20061: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-512-5463
Section Block Clamp

145125463
F521-77-02: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-468-2645
Strap Fastener Loop

144682645
12-469-300: RNCC: 3 | RNVC: 2
12-469-300: RNCC: 5 | RNVC: 9

16 Feb 1994

5340-14-456-3273
Bumper

144563273
J05402-01-0403P011: RNCC: 3 | RNVC: 2

25 Jun 1992

5340-14-555-1400
Access Cover

145551400
FB384 010 07 P DXL-080: RNCC: 3 | RNVC: 2

4 Oct 2007

5340-14-462-9177
Mounting Plate

144629177
2085-06-042: RNCC: 3 | RNVC: 2
89482679: RNCC: 5 | RNVC: 2

5 May 1993

5340-14-531-4873
Swivel Caster

145314873
HF5BD200-78L: RNCC: 3 | RNVC: 2

21 Aug 2002

5340-14-437-4652
Mounting Bracket

144374652
332A91-3000-26: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-535-2290
Furniture Leg Tip

145352290
44600-20: RNCC: 3 | RNVC: 2
44600DIA20: RNCC: 5 | RNVC: 2

14 May 2003

5340-14-495-8828
Mounting Plate

144958828
NO PRIMARY REF14-495-8828: RNCC: 3 | RNVC: 2
9G6188: RNCC: 5 | RNVC: 9
F300 0T 020 4012: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-437-9547
Mounting Bracket

144379547
330A76-3005-07: RNCC: 3 | RNVC: 2

28 Feb 1990

5340-14-304-3045
Angle Bracket

143043045
121S71-270-54-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-452-6415
Pawl Fastener

144526415
1048A: RNCC: 3 | RNVC: 2

15 Jan 1992

5340-14-451-2159
Rod End Connector

144512159
PM1A473316310: RNCC: 3 | RNVC: 2
PM1A473316310: RNCC: 5 | RNVC: 2

6 Nov 1991

5340-14-486-5096
Access Cover

144865096
21551578-2: RNCC: 3 | RNVC: 2

21 Mar 1997

5340-14-513-7275
Strap Fastener Loop

145137275
466310: RNCC: 3 | RNVC: 2

9 Apr 1999

5340-14-297-7061
Access Cover

142977061
U0007182-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-206-9123
Retaining Strap

142069123
17-8-876: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-452-7261
Mounting Bracket

144527261
ST406M61P51-9: RNCC: 3 | RNVC: 2

15 Jan 1992

5340-14-409-5070
Rod End Clevis

144095070
35575-1: RNCC: 3 | RNVC: 2

13 Sep 2000

5340-14-486-1805
Angle Bracket

144861805
63830-4: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-430-5603
Flush Catch Claw

144305603
PM1A214750106: RNCC: 3 | RNVC: 2
PM1A214750106: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-514-0772
Pawl Fastener Set

145140772
PM1A005001N24: RNCC: 3 | RNVC: 2
PM1A005001N24: RNCC: 5 | RNVC: 2
MJCH: RNCC: 5 | RNVC: 9

22 Apr 1999

5340-14-297-4618
Mortise Lock Set

142974618
850TC: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-350-7960
Loop Clamp

143507960
620-854-938-0: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-394-6442
Rod End Clevis

143946442
79110170: RNCC: 3 | RNVC: 2
79110170: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-456-1164
Loop Clamp

144561164
Y8211125: RNCC: 3 | RNVC: 2

18 Jun 1992

5340-14-540-2964
Access Cover

145402964
4528491C: RNCC: 3 | RNVC: 2

18 Mar 2004

5340-14-520-0161
Access Cover

145200161
10567634: RNCC: 3 | RNVC: 2

3 May 2000

5340-14-486-1835
Door Handle

144861835
63862-7: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-515-2460
Access Cover

145152460
5512642407: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-352-0160
Bow Handle

143520160
A11A262100025U2: RNCC: 3 | RNVC: 2

16 Oct 1978

5340-14-480-7600
Mounting Bracket

144807600
1302111P111: RNCC: 3 | RNVC: 2

28 Mar 1996

5340-14-549-6137
Case Leg

145496137
1ME51003102: RNCC: 3 | RNVC: 2

21 Apr 2006

5340-14-210-5206
Bumper

142105206
7461: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-551-9832
Mounting Bracket

145519832
82177171000: RNCC: 3 | RNVC: 2

15 Nov 2006

5340-14-554-8674
Utility Access Door

145548674
433-07: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-464-8294
Mortise Lock Set

144648294
484A-2-2N: RNCC: 3 | RNVC: 2

1 Sep 1993

5340-14-278-3289
Pipe Hanger

142783289
160-11521-03: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-255-4460
Mounting Plate

142554460
321A71-2063-20: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-473-0893
Access Cover

144730893
920401000035: RNCC: 3 | RNVC: 2
AS2-0.001.575: RNCC: 5 | RNVC: 2
89302185: RNCC: 5 | RNVC: 2

7 Dec 1994

5340-14-368-3097
Access Cover

143683097
T07404-79: RNCC: 3 | RNVC: 2
3362338: RNCC: 5 | RNVC: 2
3362338: RNCC: 5 | RNVC: 2

20 Feb 1981

5340-14-529-6851
Bumper

145296851
3511-192-35261: RNCC: 3 | RNVC: 2

4 Apr 2002

5340-14-401-4394
Access Cover

144014394
2873-14: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-462-8992
Mounting Plate

144628992
JVCIT03-10: RNCC: 3 | RNVC: 2
89470273: RNCC: 5 | RNVC: 2

5 May 1993

5340-14-235-1331
Loop Clamp

142351331
NO PRIMARY REF14-235-1331: RNCC: 3 | RNVC: 2
13052: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-315-3528
Clamping Catch

143153528
GO.26-BR: RNCC: 3 | RNVC: 2
G026BR: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-336-4060
Cover Strip

143364060
341A25-1002-136: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-463-4896
Mounting Plate

144634896
330A64-1473-00: RNCC: 3 | RNVC: 2
F300 0T 015 0567: RNCC: 5 | RNVC: 9

17 Jun 1993

5340-14-365-4852
Loop Clamp

143654852
262-50-50514-03: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-476-5911
Swivel Caster

144765911
SP4PA125-47R: RNCC: 3 | RNVC: 9

21 Jun 1995

5340-14-230-7318
Handwheel

142307318
GSM137-001F15-2N1: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-326-5530
Access Cover

143265530
3511 130 79711: RNCC: 3 | RNVC: 2
3511-130-79711: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-421-4153
Mounting Plate

144214153
702A50-0030-20: RNCC: 3 | RNVC: 2
F300 0T 005 1742: RNCC: 5 | RNVC: 9
702A50-0030: RNCC: 5 | RNVC: 9

14 Jan 1988

5340-14-230-7296
Handwheel

142307296
GSM137-001F10-4C1: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-388-8951
Butt Hinge

143888951
365A25-3066-05: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-464-9037
Mounting Bracket

144649037
851-913-098-0: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-430-3336
Webbing Strap

144303336
6291-52023: RNCC: 3 | RNVC: 2

15 Mar 1989

5340-14-520-5060
Arched Cushion

145205060
MAT169-0012F22DE8: RNCC: 3 | RNVC: 2

19 May 2000

5340-14-475-5050
Mounting Bracket

144755050
TB1030101F025: RNCC: 3 | RNVC: 2
TB1030101-00SPF025: RNCC: 5 | RNVC: 2
08-60-0050: RNCC: 5 | RNVC: 9

12 Apr 1995

5340-14-343-9539
Angle Bracket

143439539
262-12-81116-01: RNCC: 3 | RNVC: 2
85-689-3665: RNCC: 6 | RNVC: 9

13 Jul 1977

5340-14-437-2297
Handwheel

144372297
AL TYPE 111 80: RNCC: 3 | RNVC: 2
AL-TYPE111-80: RNCC: 5 | RNVC: 2

23 Jan 1990

5340-14-339-9160
Casement Fastener

143399160
6890-0703: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-406-6441
Plug Button

144066441
851-200-024-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-472-8893
Access Cover

144728893
332A67-3247-00: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-339-4809
Retaining Strap

143394809
M3E702-16-02: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-487-0653
Pipe Hanger

144870653
A03037-10-2010P110: RNCC: 3 | RNVC: 2

2 Apr 1997

5340-14-447-4667
Cover Strip

144474667
MAT171-1193F6: RNCC: 3 | RNVC: 2

15 May 1991

5340-14-377-8057
Control Rod

143778057
32416-21BREP1: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-485-0641
Dashpot Piston

144850641
332A31-1972-01: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-14-470-5887
Mounting Plate

144705887
80-301020: RNCC: 3 | RNVC: 2

27 Jun 1994

5340-14-367-9047
Access Cover

143679047
237-0081: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-249-8300
Retaining Strap

142498300
FTKF1-4B: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-450-1723
Mounting Bracket

144501723
3511 000 07371: RNCC: 3 | RNVC: 2
3511-000-07371: RNCC: 5 | RNVC: 2
3511 000 07371: RNCC: 5 | RNVC: 2

25 Sep 1991

5340-14-365-1620
Loop Clamp

143651620
511119050401: RNCC: 3 | RNVC: 2
A0021-35P40: RNCC: 5 | RNVC: 2
55219-340B237DB: RNCC: 5 | RNVC: 2
35P40: RNCC: 5 | RNVC: 2
85-691-3007: RNCC: 6 | RNVC: 9

2 Sep 1980

5340-14-511-3576
Section Block Clamp

145113576
F701-27-02: RNCC: 3 | RNVC: 2

16 Dec 1998

5340-14-520-7366
Arched Cushion

145207366
MAT169-0027F19DE35: RNCC: 3 | RNVC: 2

6 Jun 2000

5340-14-457-6766
Pipe Hanger

144576766
402231A-SG10137-Z2CND17-12: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-413-9909
Runner

144139909
13-201-03: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-438-4899
Bow Handle

144384899
332A61-5115-20: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-501-9395
Mounting Bracket

145019395
332A24-0581-00: RNCC: 3 | RNVC: 2

19 Nov 1997

5340-14-032-0731
Angle Bracket

140320731
341A58-1012-00: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-551-5927
Loop Clamp

145515927
50101246-010: RNCC: 3 | RNVC: 2

6 Oct 2006

5340-14-275-1627
Retaining Strap

142751627
155583: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-512-6869
Mounting Bracket

145126869
10415930: RNCC: 3 | RNVC: 2

19 Feb 1999

5340-14-506-8529
Mounting Bracket

145068529
B47343: RNCC: 3 | RNVC: 2

27 May 1998

5340-14-413-9395
Angle Bracket

144139395
410773: RNCC: 3 | RNVC: 2
BJQ410773: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-520-1820
Access Cover

145201820
46248870: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-540-1532
Access Cover

145401532
F00121047: RNCC: 3 | RNVC: 2
F00121047: RNCC: 5 | RNVC: 2

11 Mar 2004

5340-14-474-6125
Access Cover

144746125
3BA56064AA: RNCC: 3 | RNVC: 2

22 Feb 1995

5340-14-551-3381
Pipe Hanger

145513381
RA1A702416109: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-300-8624
Retaining Bail

143008624
36707: RNCC: 3 | RNVC: 9

1 Jan 1973

5340-14-286-1679
Rod End Clevis

142861679
1685BIS: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-538-7729
Handwheel

145387729
NGM0011040318482: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-509-6498
Cover Strip

145096498
RA1M116090011: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-462-0356
Mounting Bracket

144620356
D54659: RNCC: 3 | RNVC: 2
D54659: RNCC: 5 | RNVC: 2

31 Mar 1993

5340-14-463-7047
Shelf Bracket

144637047
7902015129: RNCC: 3 | RNVC: 2

23 Jun 1993

5340-14-366-7814
Retaining Strap

143667814
253201: RNCC: 3 | RNVC: 2
253201: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-425-4512
Mounting Plate

144254512
27117692-4: RNCC: 3 | RNVC: 2

5 Jul 1988

5340-14-532-8280
Mounting Plate

145328280
0260627310: RNCC: 3 | RNVC: 2

18 Dec 2002

5340-14-535-0484
Mounting Bracket

145350484
T947A1001206: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-14-402-0833
Angle Bracket

144020833
400582: RNCC: 3 | RNVC: 2
BGE400582: RNCC: 5 | RNVC: 2

26 Jun 1985

5340-14-447-0369
Mounting Bracket

144470369
10-244-1-3: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-14-416-6861
Angle Bracket

144166861
412902020013: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-386-8260
Mortise Lock Set

143868260
5272-5294FLASQUESACIERPLASTIFIE: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-542-9078
Eye Hook

145429078
30C: RNCC: 3 | RNVC: 2
30C: RNCC: 5 | RNVC: 2

14 Aug 2004

5340-14-434-3027
Mounting Bracket

144343027
554532: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-420-4861
Access Cover

144204861
23109669-9: RNCC: 3 | RNVC: 2

10 Dec 1987

5340-14-336-7112
Angle Bracket

143367112
184738: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-471-7911
Angle Bracket

144717911
P02650: RNCC: 3 | RNVC: 2

14 Sep 1994

5340-14-432-3789
Mounting Bracket

144323789
540648: RNCC: 3 | RNVC: 2
00540648: RNCC: 5 | RNVC: 2

7 Jun 1989

5340-14-413-9843
Detent Plunger

144139843
410056: RNCC: 3 | RNVC: 2
BJQ410056: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-507-9887
Bumper

145079887
45040: RNCC: 3 | RNVC: 2
8922200003: RNCC: 5 | RNVC: 9

26 Aug 1998

5340-14-360-1907
Block Clamp

143601907
A11A704102020: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-14-428-6264
Block Clamp

144286264
LB10111556005: RNCC: 3 | RNVC: 2
10111556005: RNCC: 5 | RNVC: 2

8 Dec 1988

5340-14-551-5238
Angle Bracket

145515238
718126: RNCC: 3 | RNVC: 2

28 Sep 2006

5340-14-549-0916
Angle Bracket

145490916
RA1M703165311A1N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-530-0299
Angle Bracket

145300299
4187546-2: RNCC: 3 | RNVC: 2
4187546-2: RNCC: 5 | RNVC: 2

30 Apr 2002

5340-14-400-4912
Expansion Shield

144004912
U8: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-400-4606
Case Corner

144004606
8010ACIERNICKELE: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-549-7585
Angle Bracket

145497585
56291746: RNCC: 3 | RNVC: 2

10 May 2006

5340-14-549-0185
Mounting Bracket

145490185
10645906002: RNCC: 3 | RNVC: 2

1 Mar 2006

5340-14-452-9691
Mounting Bracket

144529691
A90398-1: RNCC: 3 | RNVC: 2

29 Jan 1992

5340-14-349-9109
Angle Bracket

143499109
7887: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-459-1574
Mounting Plate

144591574
16787466: RNCC: 3 | RNVC: 2

19 Nov 1992

5340-14-262-3715
Leaf Spring

142623715
175-26-323: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-497-5897
Mounting Plate

144975897
2R694: RNCC: 3 | RNVC: 2
F300 0T 023 3930: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-549-0795
Angle Bracket

145490795
RA1M794600981A1N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-402-1028
Mending Plate

144021028
400498: RNCC: 3 | RNVC: 2
BGE400498: RNCC: 5 | RNVC: 2

26 Jun 1985

5340-14-543-4536
Mounting Bracket

145434536
072944987000010: RNCC: 3 | RNVC: 2

30 Oct 2004

5340-14-341-5615
Rod End Clevis

143415615
0249970280: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-442-4229
Plug Button

144424229
MCK01-02: RNCC: 3 | RNVC: 2

16 Oct 1990

5340-14-457-3636
Handwheel

144573636
45215383: RNCC: 3 | RNVC: 2
45215383: RNCC: 5 | RNVC: 9

27 Aug 1992

5340-14-460-8481
Mounting Plate

144608481
39713A: RNCC: 3 | RNVC: 2

10 Feb 1993

5340-14-297-6725
Access Cover

142976725
1510-00-00-10: RNCC: 3 | RNVC: 2
1510-00-00-10: RNCC: 5 | RNVC: 9
1510-00-00-10: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-321-6476
Mounting Plate

143216476
0262130510: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-485-7986
Bumper

144857986
429218: RNCC: 3 | RNVC: 2
429218-003: RNCC: 5 | RNVC: 9

12 Feb 1997

5340-14-551-2676
Angle Bracket

145512676
S47008: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-410-5446
Utility Access Door

144105446
NO PRIMARY REF14-410-5446: RNCC: 3 | RNVC: 2
92E0770: RNCC: 5 | RNVC: 2
756116-1: RNCC: 5 | RNVC: 9

2 Jul 1986

5340-14-555-1137
Utility Access Door

145551137
82160907000: RNCC: 3 | RNVC: 2

2 Oct 2007

5340-14-500-8256
Section Block Clamp

145008256
E64009998028: RNCC: 3 | RNVC: 2
F300 0T 024 8458: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-413-9998
Rigid Caster

144139998
13-201-119: RNCC: 3 | RNVC: 2
13-212-23: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-539-4285
Mounting Plate

145394285
21429534-00: RNCC: 3 | RNVC: 2
21429534-4: RNCC: 5 | RNVC: 2

14 Jan 2004

5340-14-476-0788
Mounting Bracket

144760788
TLE1020-07: RNCC: 3 | RNVC: 2
T1020-07: RNCC: 5 | RNVC: 2
Y00003105: RNCC: 5 | RNVC: 2
TL1020-07: RNCC: 5 | RNVC: 2
Y00003105: RNCC: 5 | RNVC: 9
JOSTLE1020-07: RNCC: 5 | RNVC: 9

17 May 1995

5340-14-032-2362
Clamping Catch

140322362
40-26-20-2: RNCC: 3 | RNVC: 2

30 Mar 1982

5340-14-518-4006
Loop Clamp

145184006
315301602: RNCC: 3 | RNVC: 2
ASNA0021-31S16: RNCC: 5 | RNVC: 2
A0021-31S16: RNCC: 5 | RNVC: 2
31S16: RNCC: 5 | RNVC: 2
513153050161: RNCC: 5 | RNVC: 9

4 Feb 2000

5340-14-501-4514
Pipe Hanger

145014514
307-811-706-0: RNCC: 3 | RNVC: 2

29 Oct 1997

5340-14-464-8935
Mounting Bracket

144648935
312-01666-001: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-483-9636
Cover Strip

144839636
366A25-0023-13: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-14-458-7363
Arched Cushion

144587363
F0143-009F18TAB2DE89: RNCC: 3 | RNVC: 2
MAT169-0012F21DE89: RNCC: 3 | RNVC: 2

29 Oct 1992

5340-14-413-9946
Anchor Strap

144139946
13-203-183: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-506-4467
Butt Hinge

145064467
AL50-5LAITON-CHROME: RNCC: 3 | RNVC: 2

29 Apr 1998

5340-14-473-6709
Strap Hinge

144736709
332A69-1317-00: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-363-7521
Loop Clamp

143637521
C6045-22BIS0: RNCC: 3 | RNVC: 2

6 Jul 1980

5340-14-482-9412
Pipe Hanger

144829412
78733-042-040B: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-486-0422
Track Stop

144860422
429729: RNCC: 3 | RNVC: 2
429729-001: RNCC: 5 | RNVC: 9

26 Feb 1997

5340-14-349-3107
Access Cover

143493107
NO PRIMARY REF14-349-3107: RNCC: 3 | RNVC: 2
Y44890: RNCC: 5 | RNVC: 9

22 May 1978

5340-14-331-4381
Bumper

143314381
3160S73-37-256: RNCC: 3 | RNVC: 2
85-801-8710: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-485-2627
Mounting Plate

144852627
31-0011-013: RNCC: 3 | RNVC: 2

15 Jan 1997

5340-14-519-0316
Access Cover

145190316
332A57-4135-20: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-543-9927
Blank Panel

145439927
332P61-5546-04: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-14-530-7625
Bumper

145307625
95MS289-01-5002: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-503-2813
Mounting Plate

145032813
332P87-0025-70: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-416-0479
Anchor Strap

144160479
10-082-144: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-297-7327
Control Rod

142977327
GSM173-018F80: RNCC: 3 | RNVC: 2
GSM173-018F80,76: RNCC: 5 | RNVC: 2
GSM1868DET8: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-390-2795
Mounting Plate

143902795
T3101-8603: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-482-6430
Locking Stay

144826430
755404001231: RNCC: 3 | RNVC: 2
7554G-400: RNCC: 5 | RNVC: 2
7554G400: RNCC: 5 | RNVC: 2

18 Jul 1996

5340-14-485-3659
Mounting Bracket

144853659
NO PRIMARY REF14-485-3659: RNCC: 3 | RNVC: 2
RAB9736: RNCC: 5 | RNVC: 2
10360: RNCC: 5 | RNVC: 9

20 Jan 1997

5340-14-486-0245
Lock Key

144860245
35111-880-003: RNCC: 3 | RNVC: 2
35111-880-003: RNCC: 5 | RNVC: 2

26 Feb 1997

5340-14-281-7348
Clamping Catch

142817348
NO PRIMARY REF14-281-7348: RNCC: 3 | RNVC: 2
CDF7052-3: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-241-9658
Plug Button

142419658
253-5M836P14: RNCC: 3 | RNVC: 9
PA253-5M836P14: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-238-9877
Access Cover

142389877
NO PRIMARY REF14-238-9877: RNCC: 3 | RNVC: 2
13770: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-217-9026
Cover Strip

142179026
3160S25-11-024: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-476-0399
Mortise Lock Set

144760399
911-40A: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-410-1394
Plug Button

144101394
ER820000-00-306-318: RNCC: 3 | RNVC: 2

4 Jun 1986

5340-14-458-1627
Mounting Bracket

144581627
54300-008-1: RNCC: 3 | RNVC: 2
1914BK02: RNCC: 5 | RNVC: 9
85-694-5381: RNCC: 6 | RNVC: 9

8 Oct 1992

5340-14-506-1989
Access Cover

145061989
350A21-1325-0501: RNCC: 3 | RNVC: 2

14 Apr 1998

5340-14-256-7006
Rod End Connector

142567006
D2140-5-115: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-500-7837
Runner

145007837
75-080-60: RNCC: 3 | RNVC: 2
612-279-0: RNCC: 3 | RNVC: 2
F300 0T 024 8037: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-519-0987
Mounting Plate

145190987
139E360-01: RNCC: 3 | RNVC: 2
139E360-01: RNCC: 5 | RNVC: 9

7 Mar 2000

5340-14-504-1050
Buckle

145041050
34216-014: RNCC: 3 | RNVC: 2
34216L14: RNCC: 5 | RNVC: 2

6 Feb 1998

5340-14-454-2738
Rod End Clevis

144542738
Z410-003-000: RNCC: 3 | RNVC: 2
Z410-003: RNCC: 5 | RNVC: 2

26 Mar 1992

5340-14-375-9764
Leaf Spring

143759764
NO PRIMARY REF14-375-9764: RNCC: 3 | RNVC: 2
464109891: RNCC: 5 | RNVC: 2
464109891: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-379-3146
Anchor Strap

143793146
15004: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-386-1807
Access Cover

143861807
CPA133016: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-425-5942
Access Cover

144255942
557414: RNCC: 3 | RNVC: 2

12 Jul 1988

5340-14-335-3544
Anchor Strap

143353544
206142: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-425-5461
Access Cover

144255461
20779160: RNCC: 3 | RNVC: 2

7 Jul 1988

5340-14-461-9372
Rod End Clevis

144619372
T700A5210245100: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-383-5300
Access Cover

143835300
18801900: RNCC: 3 | RNVC: 2
18801900: RNCC: 5 | RNVC: 2

11 Apr 1983

5340-14-449-0416
Access Cover

144490416
16283801: RNCC: 3 | RNVC: 2

24 Jul 1991

5340-14-520-1435
Utility Access Door

145201435
52749: RNCC: 3 | RNVC: 2
SDM52749: RNCC: 5 | RNVC: 9

16 May 2000

5340-14-405-3596
Anchor Strap

144053596
5172030000: RNCC: 3 | RNVC: 2
720300: RNCC: 5 | RNVC: 9

27 Nov 1985

5340-14-555-4432
Webbing Strap

145554432
41111895: RNCC: 3 | RNVC: 2

19 Nov 2007

5340-14-520-3447
Access Cover

145203447
40147434: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-450-2100
Anchor Strap

144502100
5000920661: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-476-5509
Plug Button

144765509
1082498P00: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-14-399-3865
Retaining Strap

143993865
79093383: RNCC: 3 | RNVC: 2
79093383: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-542-7590
Access Cover

145427590
61022943AA: RNCC: 3 | RNVC: 2

12 Aug 2004

5340-14-362-4775
Angle Bracket

143624775
5000499742: RNCC: 3 | RNVC: 2
5000499742: RNCC: 5 | RNVC: 9

19 Mar 1980

5340-14-396-0830
Access Cover

143960830
133700012: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-374-6152
Anchor Strap

143746152
5000611377: RNCC: 3 | RNVC: 2
5000611377: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-279-2835
Loop Clamp

142792835
160-79599: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-405-2860
Access Cover

144052860
40014006: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-348-7038
Anchor Strap

143487038
1115306: RNCC: 3 | RNVC: 2
1115306: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-403-0462
Mending Plate

144030462
29739158: RNCC: 3 | RNVC: 2
29739158: RNCC: 5 | RNVC: 9

25 Jul 1985

5340-14-517-0086
Bridge Clamp

145170086
RA1M794200811N1: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-382-5617
Angle Bracket

143825617
16497238: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-528-9992
Loop Clamp

145289992
710731: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-14-401-0918
Access Cover

144010918
606038: RNCC: 3 | RNVC: 2

29 May 1985

5340-14-555-6541
Push Door Plate

145556541
P1160050: RNCC: 3 | RNVC: 2

5 Dec 2007

5340-14-349-7515
Access Cover

143497515
053M26-526467T: RNCC: 3 | RNVC: 2
0526467T00: RNCC: 5 | RNVC: 2

14 Jun 1978

5340-14-328-8289
Access Cover

143288289
150306: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-554-1488
Mounting Bracket

145541488
82051110000: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-409-1046
Access Cover

144091046
618489: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-536-1903
Access Cover

145361903
803237140119: RNCC: 3 | RNVC: 2

15 Jul 2003

5340-14-375-2923
Anchor Strap

143752923
136-166: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-379-4376
Access Cover

143794376
2206-321C509: RNCC: 3 | RNVC: 2

1 Oct 1982

5340-14-532-5475
Mounting Plate

145325475
21103985: RNCC: 3 | RNVC: 2
21103985: RNCC: 5 | RNVC: 2

13 Nov 2002

5340-14-305-6268
Butt Hinge

143056268
4550SY100X60GCHR0ME: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-246-3392
Mending Plate

142463392
70824182: RNCC: 3 | RNVC: 2
70824182: RNCC: 5 | RNVC: 9
824182: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-402-6245
Anchor Strap

144026245
7700653013: RNCC: 3 | RNVC: 2

19 Jul 1985

5340-14-546-6070
Loop Clamp

145466070
RPL741500502B1: RNCC: 3 | RNVC: 2

21 Jul 2005

5340-14-484-6667
Webbing Strap

144846667
29444168: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-394-1647
Bail Handle

143941647
7353ACIERZINGUEBICHR0MATE: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-547-5955
Loop Clamp

145475955
112APA-IS: RNCC: 3 | RNVC: 2

18 Oct 2005

5340-14-031-3489
Clamping Catch

140313489
2386CB: RNCC: 3 | RNVC: 2
0049813S00: RNCC: 5 | RNVC: 2
2386: RNCC: 5 | RNVC: 9

14 Jun 1980

5340-14-460-6071
Mounting Plate

144606071
160R742637: RNCC: 3 | RNVC: 2

4 Feb 1993

5340-14-434-0377
Mounting Bracket

144340377
536019: RNCC: 3 | RNVC: 2

29 Aug 1989

5340-14-536-4181
Mounting Bracket

145364181
T711A1001360: RNCC: 3 | RNVC: 2

5 Aug 2003

5340-14-477-8926
Bow Handle

144778926
T700A2522052100: RNCC: 3 | RNVC: 2

27 Sep 1995

5340-14-468-5078
Clamping Catch

144685078
1077896K00: RNCC: 3 | RNVC: 2

3 Mar 1994

5340-14-551-3548
Angle Bracket

145513548
RA1A701716119: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-445-3491
Plate Spacer

144453491
233193V: RNCC: 3 | RNVC: 2

11 Feb 1991

5340-14-474-4513
Loop Clamp

144744513
51121905013: RNCC: 3 | RNVC: 2
24PE13: RNCC: 5 | RNVC: 2
25PE13: RNCC: 5 | RNVC: 2

15 Feb 1995

5340-14-512-5845
Bumper

145125845
3BM04703AAAA: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-553-4608
Angle Bracket

145534608
DE2B236700006: RNCC: 3 | RNVC: 2

5 Apr 2007

5340-14-363-8850
Anchor Strap

143638850
59399002: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-230-5100
Access Cover

142305100
0064347000: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-505-4884
Bow Handle

145054884
5000227160: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-312-8303
Mounting Bracket

143128303
0249857310: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-370-7568
Angle Bracket

143707568
16909598: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-428-7710
Mounting Plate

144287710
000202454600: RNCC: 3 | RNVC: 2

20 Dec 1988

5340-14-312-1184
Retaining Strap

143121184
169402: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-555-0936
Bow Handle

145550936
82154972000: RNCC: 3 | RNVC: 2

27 Sep 2007

5340-14-522-8091
Cover Strip

145228091
RA1M525910120N1: RNCC: 3 | RNVC: 2

28 Nov 2000

5340-14-446-0834
Webbing Strap

144460834
007859035P: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-550-4901
Angle Bracket

145504901
RA1M704854283N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-403-3342
Retaining Strap

144033342
206356: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-489-8780
Mounting Bracket

144898780
BB2541-3: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-14-353-3892
Mending Plate

143533892
21312438: RNCC: 3 | RNVC: 2
21312438-5: RNCC: 5 | RNVC: 2

8 Dec 1978

5340-14-325-6081
Lock-Release Lever

143256081
16169-29: RNCC: 3 | RNVC: 2
1916M206: RNCC: 3 | RNVC: 2
1916M206: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-450-2129
Anchor Strap

144502129
5000987893: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-534-8499
Retaining Strap

145348499
10613080: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-14-425-1692
Access Cover

144251692
0795339Y00: RNCC: 3 | RNVC: 2

23 Jun 1988

5340-14-534-7137
Mounting Bracket

145347137
10570564: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-517-8644
Mounting Bracket

145178644
92 020 02 0202-1: RNCC: 3 | RNVC: 2

14 Jan 2000

5340-14-286-5083
Eye Hook

142865083
341A25-1106-20: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-514-9453
Mounting Plate

145149453
CA3241-2: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-14-513-0424
Runner

145130424
H125083: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-14-232-6345
Bumper

142326345
LXA55P: RNCC: 3 | RNVC: 9
220-1: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-351-3916
Retaining Strap

143513916
710425-1: RNCC: 3 | RNVC: 2

23 Aug 2000

5340-14-355-5317
Loop Clamp

143555317
3-2607-40E: RNCC: 3 | RNVC: 2

19 Mar 1979

5340-14-445-5070
Mounting Bracket

144455070
ST406M53P134-2: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-14-523-7061
Mounting Plate

145237061
Q5220347: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-430-6717
Plate Spacer

144306717
PM1A584210128: RNCC: 3 | RNVC: 2
PM1A584210128: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-375-2772
Anchor Strap

143752772
5000011374: RNCC: 3 | RNVC: 2
5000011374: RNCC: 5 | RNVC: 9

26 Feb 1982

5340-14-555-5547
Access Cover

145555547
10659538001: RNCC: 3 | RNVC: 2

27 Nov 2007

5340-14-518-9405
Mounting Plate

145189405
4VH26636: RNCC: 3 | RNVC: 2

29 Feb 2000

5340-14-523-7163
Loop Clamp

145237163
T1536969: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-474-6784
Access Cover

144746784
44032557: RNCC: 3 | RNVC: 2
44032557: RNCC: 5 | RNVC: 9

22 Feb 1995

5340-14-397-8239
Rope Cleat

143978239
M4ZS510D1221A: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-328-9549
Handwheel

143289549
20848: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-530-5940
Retaining Strap

145305940
211498: RNCC: 3 | RNVC: 2

26 Jun 2002

5340-14-383-4804
Access Cover

143834804
20070100: RNCC: 3 | RNVC: 2
20070100: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-429-6795
Retaining Strap

144296795
093200C02TRA: RNCC: 3 | RNVC: 2
093200C: RNCC: 5 | RNVC: 2

8 Feb 1989

5340-14-554-8815
Loop Clamp

145548815
78651RH10CG: RNCC: 1 | RNVC: 2
78651RH10CG: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-364-3448
Butt Hinge

143643448
938258001080: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-469-0433
Plug Button

144690433
ETD014055013720: RNCC: 3 | RNVC: 2

5 Apr 1994

5340-14-303-4293
Access Cover

143034293
157209: RNCC: 3 | RNVC: 2
157209: RNCC: 6 | RNVC: 9

1 Jan 1973

5340-14-463-9991
Access Cover

144639991
ST406M42G56: RNCC: 3 | RNVC: 2

7 Jul 1993

5340-14-379-8060
Access Cover

143798060
064E07-543653G: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-507-9519
Loop Clamp

145079519
68930013: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-449-8662
Anchor Strap

144498662
7700646351: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-14-485-5460
Access Cover

144855460
20377826: RNCC: 3 | RNVC: 2

29 Jan 1997

5340-14-350-4170
Rod End Clevis

143504170
212694: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-501-6597
Mounting Bracket

145016597
45283099: RNCC: 3 | RNVC: 2
45283099: RNCC: 3 | RNVC: 9

5 Nov 1997

5340-14-520-0705
Access Cover

145200705
47134915: RNCC: 3 | RNVC: 2

10 May 2000

5340-14-539-5558
Door Holder

145395558
SZ09.425.535: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-541-8980
Mounting Plate

145418980
61394998AA: RNCC: 3 | RNVC: 2

2 Jul 2004

5340-14-235-7534
Rod End Clevis

142357534
261P423: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-549-8560
Rod End Clevis

145498560
2092316: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-529-4238
Webbing Strap

145294238
6501DCC115: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-461-6647
Handwheel

144616647
1049632T00: RNCC: 3 | RNVC: 2
MAT460-04-00-A: RNCC: 5 | RNVC: 2

19 Mar 1993

5340-14-541-5164
Angle Bracket

145415164
1091447-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-438-2760
Webbing Strap

144382760
815-0-79-988: RNCC: 3 | RNVC: 2

12 Mar 1990

5340-14-430-6391
Eye Hook

144306391
4601BTF103-1010: RNCC: 3 | RNVC: 2

22 Mar 1989

5340-14-388-9476
Rod End Clevis

143889476
ST159-2M664P127: RNCC: 3 | RNVC: 2
ST159-2M664P127A: RNCC: 5 | RNVC: 2

29 Nov 1983

5340-14-362-8091
Loop Clamp

143628091
650-403-007-0: RNCC: 3 | RNVC: 2

19 Mar 1980

5340-14-432-6949
Mounting Plate

144326949
A3H193A: RNCC: 3 | RNVC: 2
A3H193A-71167: RNCC: 5 | RNVC: 2

21 Jun 1989

5340-14-449-0647
Butt Hinge

144490647
A10-21-142-29-0: RNCC: 3 | RNVC: 2
A10-21-142-29-0: RNCC: 5 | RNVC: 2
85-693-8157: RNCC: 6 | RNVC: 9

24 Jul 1991

5340-14-453-4221
Mounting Plate

144534221
NO PRIMARY REF14-453-4221: RNCC: 3 | RNVC: 2
818845: RNCC: 5 | RNVC: 2

19 Feb 1992

5340-14-533-0964
Access Cover

145330964
8237-009: RNCC: 3 | RNVC: 2

23 Jan 2003

5340-14-244-9718
Strap Hinge

142449718
D1010-372: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-489-6322
Cover Strip

144896322
332A54-1105-20: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-527-2102
Pipe Hanger

145272102
055754-859-921: RNCC: 3 | RNVC: 9
9613238880: RNCC: 5 | RNVC: 2
6555AG: RNCC: 5 | RNVC: 2

12 Oct 2001

5340-14-392-2318
Mounting Bracket

143922318
319A24-10-121: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-490-3087
Retaining Band

144903087
J05085-02-0100P006: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-484-8193
Mounting Bracket

144848193
332P65-2727-00: RNCC: 3 | RNVC: 2

5 Dec 1996

5340-14-385-3507
Rigid Caster

143853507
703A91-0415-36: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-469-6825
Pipe Hanger

144696825
78733-020-022A: RNCC: 3 | RNVC: 2

4 May 1994

5340-14-305-6494
Loop Clamp

143056494
110002-10: RNCC: 3 | RNVC: 2
CU36: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-464-0230
Butt Hinge

144640230
2085-05-013: RNCC: 3 | RNVC: 2
89411696: RNCC: 5 | RNVC: 9

7 Jul 1993

5340-14-301-4488
Butt Hinge

143014488
J36-220-80X55GLAIT0N: RNCC: 2 | RNVC: 2

1 Jan 1973

5340-14-502-3978
Utility Access Door

145023978
330A41-2220-08: RNCC: 3 | RNVC: 2

11 Dec 1997

5340-14-451-1245
Access Cover

144511245
MAT488-0012: RNCC: 3 | RNVC: 2

30 Oct 1991

5340-14-254-2308
Retaining Strap

142542308
K00523-57: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-511-2160
Lock Bolt

145112160
B095-200-010C: RNCC: 3 | RNVC: 2

9 Dec 1998

5340-14-525-4649
Runner

145254649
312-13615-001: RNCC: 3 | RNVC: 2

5 Jun 2001

5340-14-541-8656
Cover Strip

145418656
365A25-0011-1201: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-473-8352
Mounting Bracket

144738352
332A61-3170-00: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-404-0150
Retaining Strap

144040150
350A41-1010-20: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-363-0455
Access Cover

143630455
674-060141: RNCC: 3 | RNVC: 2
PUR674-060141: RNCC: 5 | RNVC: 9

3 Apr 1980

5340-14-568-8223
Utility Resilient Mount

145688223
BFN45-320: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-14-473-3877
Lock-Release Lever

144733877
332A27-3205-02: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-354-8641
Flush Lock

143548641
22017: RNCC: 3 | RNVC: 2
7371831200: RNCC: 5 | RNVC: 2
9135-24: RNCC: 5 | RNVC: 2

20 Feb 1979

5340-14-361-6037
Handwheel

143616037
VLQ10 3 3R 1483: RNCC: 3 | RNVC: 2
680525: RNCC: 5 | RNVC: 2
VLQ10-3-3: RNCC: 5 | RNVC: 2
91376257: RNCC: 5 | RNVC: 2
VLQ10-3-3: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-14-464-2268
Mounting Plate

144642268
485-950-125-0: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-489-9251
Metal Grille

144899251
449729: RNCC: 3 | RNVC: 2
MEF20042: RNCC: 5 | RNVC: 1
449729-001: RNCC: 5 | RNVC: 9

27 Aug 1997

5340-14-465-8584
Plate Spacer

144658584
81022-2-22: RNCC: 3 | RNVC: 2

14 Oct 1993

Load More Results