What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 133 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 133 of 446

5340-14-417-9971
Access Cover

144179971
409950: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-455-3592
Butt Hinge

144553592
1673205M1: RNCC: 3 | RNVC: 2
1673205M1: RNCC: 5 | RNVC: 9

21 May 1992

5340-14-440-4490
Bridge Clamp

144404490
6J8-43615-00: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-367-9507
Threaded Rod End

143679507
52-80-4A: RNCC: 3 | RNVC: 2
85-691-3475: RNCC: 6 | RNVC: 9

19 Jan 1981

5340-14-363-8570
Access Cover

143638570
0534-18: RNCC: 3 | RNVC: 2
0534-18M: RNCC: 5 | RNVC: 2

7 Aug 1980

5340-14-232-0157
Loop Clamp

142320157
51213105030: RNCC: 3 | RNVC: 2
20G30: RNCC: 5 | RNVC: 2
A0021-20G30: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-205-8967
Rigid Caster

142058967
253-5M361P114: RNCC: 3 | RNVC: 9
PA253-5M361P114: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-496-9191
Access Cover

144969191
492126-30015-00: RNCC: 3 | RNVC: 2
F300 0T 022 2688: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-385-2410
Access Cover

143852410
4126-231A502: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-354-2595
Lock-Release Lever

143542595
650-42815-01L9: RNCC: 3 | RNVC: 2
650-42815-02L9: RNCC: 5 | RNVC: 2

30 Jan 1979

5340-14-402-3856
Cover Strip

144023856
3160S78-01-192: RNCC: 3 | RNVC: 2

3 Jul 1985

5340-14-501-2910
Access Cover

145012910
704-004-075: RNCC: 3 | RNVC: 2
704.004.075: RNCC: 3 | RNVC: 2
F300 0T 025 3319: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-545-6065
Mounting Bracket

145456065
10623329: RNCC: 3 | RNVC: 2

25 Apr 2005

5340-14-396-3899
Plug Button

143963899
IF032-210: RNCC: 3 | RNVC: 9

27 Nov 1984

5340-14-361-5199
Runner

143615199
B0064-004F19: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-240-1057
Access Cover

142401057
704657: RNCC: 3 | RNVC: 9
062076070: RNCC: 5 | RNVC: 9
76070: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-415-7994
Access Cover

144157994
15450214: RNCC: 3 | RNVC: 2
15450214: RNCC: 5 | RNVC: 9

18 May 1987

5340-14-394-9442
Access Cover

143949442
20320681: RNCC: 3 | RNVC: 2
20320681: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-031-9157
Access Cover

140319157
162987: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-397-5939
Access Cover

143975939
20197432: RNCC: 3 | RNVC: 2
20197432: RNCC: 5 | RNVC: 9

14 Dec 1984

5340-14-202-3147
Loop Clamp

142023147
STD160: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-402-1032
Mending Plate

144021032
400542: RNCC: 3 | RNVC: 2
BGE400542: RNCC: 5 | RNVC: 2

26 Jun 1985

5340-14-501-0319
Access Cover

145010319
10450378: RNCC: 3 | RNVC: 2
F300 0T 025 0618: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-469-2815
Access Cover

144692815
1036412A00: RNCC: 3 | RNVC: 2

18 Apr 1994

5340-14-553-3507
Access Cover

145533507
252694899: RNCC: 3 | RNVC: 2

28 Mar 2007

5340-14-370-5342
Rod End Clevis

143705342
16324382: RNCC: 3 | RNVC: 2
16324382: RNCC: 5 | RNVC: 2
16324382: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-397-5682
Anchor Strap

143975682
0000554837: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-14-350-6677
Access Cover

143506677
C037190068: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-459-2371
Access Cover

144592371
905Y412: RNCC: 3 | RNVC: 2
905Y412: RNCC: 5 | RNVC: 2

19 Nov 1992

5340-14-469-2442
Mounting Bracket

144692442
353071: RNCC: 3 | RNVC: 2
353 90 30 379 11: RNCC: 5 | RNVC: 9

13 Apr 1994

5340-14-539-7827
Cover Strip

145397827
F10A240000106B2: RNCC: 3 | RNVC: 2

6 Feb 2004

5340-14-520-6897
Access Cover

145206897
32117130158: RNCC: 3 | RNVC: 2
SDM32117130158: RNCC: 5 | RNVC: 9

31 May 2000

5340-14-238-8847
Access Cover

142388847
466P380: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-383-6576
Access Cover

143836576
2091-43: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-031-1614
Access Cover

140311614
VDP3957: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-547-6130
Access Cover

145476130
MTFLSH2011600: RNCC: 3 | RNVC: 2
SYQ6121: RNCC: 5 | RNVC: 2

19 Oct 2005

5340-14-502-7097
Anchor Strap

145027097
1116796: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-534-7074
Access Cover

145347074
10472260: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-354-7495
Access Cover

143547495
140361: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-530-8422
Mounting Plate

145308422
5804580E00: RNCC: 3 | RNVC: 2
5804580E00: RNCC: 5 | RNVC: 2

9 Jul 2002

5340-14-481-3682
Webbing Strap

144813682
10279363: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-399-9929
Access Cover

143999929
605029: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-379-0904
Rod End Clevis

143790904
DA2C217115001: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-377-8054
Access Door Hinge

143778054
40112PC22: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-303-9255
Loop Clamp

143039255
E29563-100: RNCC: 3 | RNVC: 2
E29563-100: RNCC: 5 | RNVC: 2

24 Jun 1998

5340-14-489-2918
Retaining Band

144892918
341A41 1008 23: RNCC: 3 | RNVC: 2
341A41-1008-23: RNCC: 3 | RNVC: 2
341A41-1008-22: RNCC: 5 | RNVC: 2
91912868: RNCC: 5 | RNVC: 2
91912870: RNCC: 5 | RNVC: 2
F300 0T 004 4174: RNCC: 6 | RNVC: 9
F300 0T 004 4175: RNCC: 6 | RNVC: 9

9 Jul 1997

5340-14-531-7330
Corner Brace

145317330
330A21-2296-38: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-14-236-0572
Rod End Clevis

142360572
160-15003-50: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-486-0642
Mounting Bracket

144860642
332A87-0501-02: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-14-360-7029
Support Hook

143607029
90465-10016: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-445-1410
Mounting Bracket

144451410
4065119: RNCC: 3 | RNVC: 2
SD4-20: RNCC: 5 | RNVC: 2
4065119: RNCC: 5 | RNVC: 9
SD4-20: RNCC: 5 | RNVC: 9
85-693-8971: RNCC: 6 | RNVC: 9

4 Feb 1991

5340-14-449-8252
Mounting Bracket

144498252
355-05-002: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-14-362-3615
Rim Latch

143623615
NO PRIMARY REF14-362-3615: RNCC: 3 | RNVC: 2
12327-500: RNCC: 5 | RNVC: 9

19 Mar 1980

5340-14-459-6048
Rigid Caster

144596048
77-502-160L25: RNCC: 3 | RNVC: 2
91386861: RNCC: 5 | RNVC: 2

10 Dec 1992

5340-14-357-3904
Butt Hinge

143573904
EA1M120-50-842: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-238-4690
Retaining Strap

142384690
GB4089-2A: RNCC: 3 | RNVC: 2
53401933632: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-468-9297
Shelf Bracket

144689297
355A58-0900-25: RNCC: 3 | RNVC: 2

29 Mar 1994

5340-14-390-8568
Retaining Strap

143908568
ST159-2M775P15: RNCC: 3 | RNVC: 2

1 Mar 1984

5340-14-265-1350
Loop Clamp

142651350
55218-204D507DB: RNCC: 3 | RNVC: 2

10 Sep 1997

5340-14-449-0996
Rod End Clevis

144490996
A03037-10-2080P004: RNCC: 3 | RNVC: 2

24 Jul 1991

5340-14-439-8244
Mounting Bracket

144398244
332A55-1258-20: RNCC: 3 | RNVC: 2

23 May 1990

5340-14-276-2784
Threaded Rod End

142762784
160-61503-01: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-440-6849
Rod End Clevis

144406849
332A81-0273-20: RNCC: 3 | RNVC: 2

18 Jul 1990

5340-14-340-2807
Access Cover

143402807
160-11: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-430-1000
Snap Hook

144301000
4702-32X40-26: RNCC: 3 | RNVC: 2

1 Mar 1989

5340-14-348-8282
Butt Hinge

143488282
160-10013-98B: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-14-276-4788
Bumper

142764788
13035-1032: RNCC: 3 | RNVC: 2
VDP1165: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-341-2150
Retaining Strap

143412150
425-30283-000: RNCC: 3 | RNVC: 2
425-30283-000: RNCC: 5 | RNVC: 2

16 Mar 1977

5340-14-264-1739
Loop Clamp

142641739
55218-340D507ADL: RNCC: 3 | RNVC: 2
55218-340-001ADL: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-325-5815
Pipe Hanger

143255815
V07534-07: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-399-9890
Loop Clamp

143999890
604184: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-541-2350
Mounting Bracket

145412350
10660863: RNCC: 3 | RNVC: 2

19 May 2004

5340-14-537-8023
Blank Panel

145378023
8046814N00: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-14-400-4599
Webbing Strap

144004599
B60L2M: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-382-3584
Rim Lock

143823584
91319865: RNCC: 3 | RNVC: 2
1112E: RNCC: 3 | RNVC: 2
91319865: RNCC: 5 | RNVC: 2
91319865: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-392-6696
Angle Bracket

143926696
168350: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-454-8621
Loop Clamp

144548621
HB121WG8: RNCC: 3 | RNVC: 2
121WG8: RNCC: 5 | RNVC: 2

24 Apr 1992

5340-14-514-5242
Mounting Bracket

145145242
373920K: RNCC: 3 | RNVC: 2

26 May 1999

5340-14-364-0691
Mending Plate

143640691
050A57-520997X: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-266-3357
Retaining Strap

142663357
202897: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-459-1954
Mounting Plate

144591954
101A103030: RNCC: 3 | RNVC: 2

19 Nov 1992

5340-14-446-3185
Mounting Bracket

144463185
5000133568: RNCC: 3 | RNVC: 2

13 Mar 1991

5340-14-250-3282
Retaining Strap

142503282
ST406M52P619: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-548-8858
Mounting Bracket

145488858
0298717370: RNCC: 3 | RNVC: 2

22 Feb 2006

5340-14-252-6537
Retaining Clip

142526537
779085: RNCC: 3 | RNVC: 2
779085: RNCC: 5 | RNVC: 2
779085: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-360-2195
Retaining Strap

143602195
16293712: RNCC: 3 | RNVC: 2
16293712: RNCC: 5 | RNVC: 9

23 Nov 1979

5340-14-531-2994
Block Clamp

145312994
T882A1001150: RNCC: 3 | RNVC: 2

6 Aug 2002

5340-14-555-9490
Webbing Strap

145559490
714680: RNCC: 3 | RNVC: 2

14 Jan 2008

5340-14-386-9180
Butt Hinge

143869180
5340CECHARNIERETACPENTANGL300: RNCC: 2 | RNVC: 2

24 Aug 1983

5340-14-481-7633
Mounting Bracket

144817633
F00153778: RNCC: 3 | RNVC: 2
F00153778: RNCC: 5 | RNVC: 9

30 May 1996

5340-14-277-7867
Mending Plate

142777867
9136020: RNCC: 3 | RNVC: 2
9136020: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-533-9839
Mounting Bracket

145339839
10672637000: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-397-5711
Leaf Spring

143975711
0000737363: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-14-505-4742
Bow Handle

145054742
206149-2C: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-479-0174
Control Rod

144790174
6232014700: RNCC: 3 | RNVC: 2
F300 0T 020 6158: RNCC: 5 | RNVC: 9

6 Dec 1995

5340-14-554-0931
Loop Clamp

145540931
350 511: RNCC: 3 | RNVC: 2
350 511: RNCC: 3 | RNVC: 2

11 Jun 2007

5340-14-409-7959
Bumper

144097959
2002057: RNCC: 3 | RNVC: 2
2002057: RNCC: 5 | RNVC: 2

28 May 1986

5340-14-498-6828
Mounting Bracket

144986828
5000607257: RNCC: 3 | RNVC: 2
5000607257: RNCC: 5 | RNVC: 9
F300 0T 007 6529: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-416-6870
Angle Bracket

144166870
412902140003: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-332-2243
Retaining Strap

143322243
193517: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-546-0140
Access Cover

145460140
200729: RNCC: 3 | RNVC: 2

6 Jun 2005

5340-14-472-4784
Access Cover

144724784
1084491M00: RNCC: 3 | RNVC: 2

26 Oct 1994

5340-14-549-6037
Access Cover

145496037
46242001: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-14-346-2980
Angle Bracket

143462980
C61662: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-327-5579
Strap Fastener Loop

143275579
198119: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-210-0675
Mortise Latch

142100675
3000352: RNCC: 3 | RNVC: 2
1000352: RNCC: 5 | RNVC: 9
3000352: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-395-8214
Mending Plate

143958214
DLT055963: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-383-4085
Mending Plate

143834085
391201: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-466-0477
Mounting Plate

144660477
10024473: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-14-511-2739
Access Cover

145112739
0249177820: RNCC: 3 | RNVC: 2

9 Dec 1998

5340-14-521-3011
Utility Access Door

145213011
10492362: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-14-381-3481
Access Cover

143813481
KPPC205: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-546-7383
Access Cover

145467383
2002349T00: RNCC: 3 | RNVC: 2

10 Aug 2005

5340-14-484-2266
Access Cover

144842266
CCN301530500A2: RNCC: 3 | RNVC: 2

31 Oct 1996

5340-14-395-5765
Rod End Clevis

143955765
5-1881B43152-403: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-277-7365
Retaining Clip

142777365
451755: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-474-8081
Mounting Plate

144748081
45676262: RNCC: 3 | RNVC: 9

1 Mar 1995

5340-14-488-1277
Access Cover

144881277
10269789: RNCC: 3 | RNVC: 2

18 Apr 1997

5340-14-450-6470
Butt Hinge

144506470
1023913D00: RNCC: 3 | RNVC: 2

16 Oct 1991

5340-14-298-5273
Access Cover

142985273
9-1699-00-00-03: RNCC: 3 | RNVC: 2
9-1699-00-00-03: RNCC: 5 | RNVC: 9
9-1699-00-00-03: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-462-3638
Access Cover

144623638
NO PRIMARY REF14-462-3638: RNCC: 3 | RNVC: 2
980392-100: RNCC: 5 | RNVC: 9

15 Apr 1993

5340-14-519-5800
Mounting Plate

145195800
4291-1-11: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-484-7700
Plug Button

144847700
F311-04812: RNCC: 3 | RNVC: 2
F311-04-812: RNCC: 5 | RNVC: 2

5 Dec 1996

5340-14-454-3965
Mounting Plate

144543965
31-26611: RNCC: 3 | RNVC: 2
31-26611: RNCC: 5 | RNVC: 9

1 Apr 1992

5340-14-464-9682
Angle Bracket

144649682
365A61-8309-20: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-522-4677
Access Cover

145224677
C0R251-250-30-17: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-14-385-6285
Angle Bracket

143856285
NO PRIMARY REF14-385-6285: RNCC: 3 | RNVC: 2
RF72-1006-1: RNCC: 5 | RNVC: 2

26 Jul 1983

5340-14-246-2685
Loop Clamp

142462685
501-773-010-0: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-481-4758
Mounting Bracket

144814758
J00790-03-1010P019: RNCC: 3 | RNVC: 2

8 May 1996

5340-14-534-1230
Mounting Bracket

145341230
332P64-1228-21: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-401-8055
Loop Clamp

144018055
226-OR: RNCC: 3 | RNVC: 2
85-692-6311: RNCC: 6 | RNVC: 9

13 Jun 1985

5340-14-482-9227
Pipe Hanger

144829227
78732-020-060: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-404-6440
Access Cover

144046440
P4H020240-00: RNCC: 3 | RNVC: 9

20 Nov 1985

5340-14-316-5180
Bumper

143165180
321A24-0142-01: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-485-5793
Mounting Bracket

144855793
332A58-1652-14: RNCC: 3 | RNVC: 2

29 Jan 1997

5340-14-375-9844
Angle Bracket

143759844
11-717-200: RNCC: 3 | RNVC: 2
11-717-200: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-549-8081
Mounting Plate

145498081
2092660-001: RNCC: 3 | RNVC: 2

15 May 2006

5340-14-482-0347
Mounting Bracket

144820347
3160S73-84-309: RNCC: 3 | RNVC: 2

13 Jun 1996

5340-14-233-1609
Angle Bracket

142331609
8533-03: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-317-2361
Synchro Clamp

143172361
8850-000: RNCC: 3 | RNVC: 2
Z00.N7141524075: RNCC: 5 | RNVC: 2
8850-000: RNCC: 5 | RNVC: 2
8850.000: RNCC: 5 | RNVC: 2
10075: RNCC: 5 | RNVC: 2
8850-000: RNCC: 5 | RNVC: 9
10075: RNCC: 5 | RNVC: 9
85-695-3605: RNCC: 6 | RNVC: 9

1 Jan 1975

5340-14-451-2458
Pipe Hanger

144512458
PM1A726142120A1: RNCC: 3 | RNVC: 2
PM1A726142120A1: RNCC: 5 | RNVC: 2

6 Nov 1991

5340-14-331-6162
Bumper

143316162
233A032: RNCC: 3 | RNVC: 2
233A032: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-513-3815
Mounting Bracket

145133815
DE33070: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-14-428-6294
Block Clamp

144286294
LB11211556018: RNCC: 3 | RNVC: 2
11211556018: RNCC: 5 | RNVC: 2

8 Dec 1988

5340-14-323-5408
Rod End Connector

143235408
011843M: RNCC: 3 | RNVC: 2
FD14B: RNCC: 5 | RNVC: 2
L00299-33: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-497-6424
Mounting Plate

144976424
5S5072: RNCC: 3 | RNVC: 2
F300 0T 023 4469: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-463-8284
Bumper

144638284
39253675: RNCC: 3 | RNVC: 2
39253675: RNCC: 3 | RNVC: 9

30 Jun 1993

5340-14-263-4574
Threaded Rod End

142634574
M110296: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-536-3414
Mounting Plate

145363414
0000293-5562: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-14-302-1490
Mending Plate

143021490
A10-22-800-08-0: RNCC: 3 | RNVC: 2
A10-22-800-08-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-257-1045
Rod End Connector

142571045
330A87-1160-20: RNCC: 3 | RNVC: 2
330A87-1160-2000: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-459-7314
Cover Strip

144597314
LN321022REP17JAG3: RNCC: 3 | RNVC: 2
RAB0179: RNCC: 5 | RNVC: 2

15 Dec 1992

5340-14-213-3124
Retaining Strap

142133124
726048: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-552-1534
Angle Bracket

145521534
RA1M701513251N1: RNCC: 3 | RNVC: 2

29 Nov 2006

5340-14-356-8015
Angle Bracket

143568015
EA1M191-13-05: RNCC: 3 | RNVC: 2

15 May 1979

5340-14-526-4671
Mounting Bracket

145264671
RA1M709381110N1: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-382-1631
Luggage Handle

143821631
341A81-1812-00: RNCC: 3 | RNVC: 2
341A81-1812-00: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-433-9169
Mounting Plate

144339169
019463W: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-14-509-0931
Shelf Bracket

145090931
8010625W00: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-535-1693
Angle Bracket

145351693
5000920570: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-489-5603
Door Handle

144895603
8184151: RNCC: 3 | RNVC: 2

30 Jul 1997

5340-14-420-7013
Angle Bracket

144207013
16744596: RNCC: 3 | RNVC: 2
16744596: RNCC: 5 | RNVC: 2
16744596: RNCC: 5 | RNVC: 9

16 Dec 1987

5340-14-238-9776
Loop Clamp

142389776
711809: RNCC: 3 | RNVC: 9
062711809: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-536-2163
Angle Bracket

145362163
RA1M216900421N1: RNCC: 3 | RNVC: 2

22 Jul 2003

5340-14-546-1787
Angle Bracket

145461787
RA1B701376061A1: RNCC: 3 | RNVC: 2

15 Jun 2005

5340-14-520-2480
Mounting Bracket

145202480
RMA38GP: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-356-2714
Loop Clamp

143562714
361: RNCC: 3 | RNVC: 2
361: RNCC: 5 | RNVC: 9

25 Apr 1979

5340-14-418-5693
Angle Bracket

144185693
31731070: RNCC: 3 | RNVC: 9

2 Sep 1987

5340-14-552-3996
Angle Bracket

145523996
12051040: RNCC: 3 | RNVC: 2
12051040: RNCC: 3 | RNVC: 9

19 Dec 2006

5340-14-528-5589
Bail Handle

145285589
374854: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-514-0371
Mounting Plate

145140371
PM1A575194381: RNCC: 3 | RNVC: 2
PM1A575194381: RNCC: 5 | RNVC: 2

22 Apr 1999

5340-14-434-3613
Blank Panel

144343613
39232402: RNCC: 3 | RNVC: 2
39232402: RNCC: 5 | RNVC: 9

20 Sep 1989

5340-14-554-0905
Loop Clamp

145540905
604 381: RNCC: 3 | RNVC: 2
604 381: RNCC: 3 | RNVC: 2

11 Jun 2007

5340-14-479-9166
Bumper

144799166
700624: RNCC: 3 | RNVC: 2

14 Feb 1996

5340-14-409-0744
Angle Bracket

144090744
4771602490: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-416-5260
Doorstop

144165260
ATL033055011001: RNCC: 3 | RNVC: 2

17 Jun 1987

5340-14-445-0548
Synchro Clamp

144450548
75271: RNCC: 3 | RNVC: 2

31 Jan 1991

5340-14-451-5217
Mounting Bracket

144515217
549589: RNCC: 3 | RNVC: 2

21 Nov 1991

5340-14-544-7289
Mounting Plate

145447289
61035771AA: RNCC: 3 | RNVC: 2

21 Feb 2005

5340-14-537-3337
Mounting Bracket

145373337
7701018892: RNCC: 3 | RNVC: 2

20 Oct 2003

5340-14-548-1033
Angle Bracket

145481033
RA1A701246051: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-396-3079
Angle Bracket

143963079
4771502270: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-322-2635
Anchor Strap

143222635
M115288: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-425-5491
Access Cover

144255491
39586138: RNCC: 3 | RNVC: 2

7 Jul 1988

5340-14-465-8848
Anchor Strap

144658848
5231101: RNCC: 3 | RNVC: 2

14 Oct 1993

5340-14-526-8209
Access Cover

145268209
5010341430: RNCC: 3 | RNVC: 2

7 Sep 2001

5340-14-552-4950
Mounting Bracket

145524950
S210V1002224: RNCC: 3 | RNVC: 2

9 Jan 2007

5340-14-463-1718
Access Cover

144631718
1893739M1: RNCC: 3 | RNVC: 2
1893739M1: RNCC: 5 | RNVC: 9

26 May 1993

5340-14-353-5777
Anchor Strap

143535777
4150: RNCC: 3 | RNVC: 2
0011050856: RNCC: 5 | RNVC: 2
0011050856: RNCC: 5 | RNVC: 9

16 Jan 1979

5340-14-381-5219
Access Cover

143815219
207378: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-545-5410
Access Cover

145455410
7508598K00: RNCC: 3 | RNVC: 2

18 Apr 2005

5340-14-504-4966
Plug Button

145044966
TR97908: RNCC: 3 | RNVC: 2

18 Feb 1998

5340-14-454-5117
Access Hole Frame

144545117
16293478: RNCC: 3 | RNVC: 2
16293478: RNCC: 5 | RNVC: 9

2 Apr 1992

5340-14-369-9782
Anchor Strap

143699782
F125405: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-405-2873
Anchor Strap

144052873
526669000: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-354-7413
Rod End Clevis

143547413
120521: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-402-6207
Access Cover

144026207
WZ2108: RNCC: 3 | RNVC: 2

19 Jul 1985

5340-14-508-5366
Access Cover

145085366
FH152009200: RNCC: 3 | RNVC: 2

16 Sep 1998

5340-14-458-8743
Access Cover

144588743
29676476: RNCC: 3 | RNVC: 2

5 Nov 1992

5340-14-419-8168
Rod End Clevis

144198168
DA2C121317834: RNCC: 3 | RNVC: 2

5 Nov 1987

5340-14-504-3073
Access Cover

145043073
3701296M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-437-4247
Mounting Plate

144374247
3005061: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-357-0624
Handwheel

143570624
11934: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-476-7608
Angle Bracket

144767608
01MOAL2415: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-14-509-1047
Angle Bracket

145091047
JVJT170003: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-364-3884
Bumper

143643884
4441010110: RNCC: 3 | RNVC: 2
4441010110: RNCC: 5 | RNVC: 2

7 Aug 1980

5340-14-434-5282
Angle Bracket

144345282
6717-16: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-354-3254
Angle Bracket

143543254
356002080400: RNCC: 3 | RNVC: 2

30 Jan 1979

5340-14-443-8747
Loop Clamp

144438747
51410605012: RNCC: 3 | RNVC: 2
28F12: RNCC: 5 | RNVC: 2

11 Dec 1990

5340-14-368-1911
Bow Handle

143681911
5345-145X163BRUT: RNCC: 3 | RNVC: 2
VDP0545: RNCC: 5 | RNVC: 2

20 Feb 1981

5340-14-519-4714
Mounting Bracket

145194714
252370630: RNCC: 3 | RNVC: 2
542591: RNCC: 5 | RNVC: 2

22 Mar 2000

5340-14-547-5224
Angle Bracket

145475224
RA1M704754415N1: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-472-2162
Retaining Band

144722162
8065-20-14: RNCC: 3 | RNVC: 2

12 Oct 1994

5340-14-379-9308
Rim Lock Set

143799308
NO PRIMARY REF14-379-9308: RNCC: 3 | RNVC: 2
1700-08-1729A1: RNCC: 5 | RNVC: 9

20 Oct 1982

5340-14-285-9691
Retaining Strap

142859691
15913044: RNCC: 3 | RNVC: 2
15913044: RNCC: 3 | RNVC: 2
15913044: RNCC: 5 | RNVC: 2
15913044: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-533-4627
Cover Strip

145334627
SZ55.250.522: RNCC: 3 | RNVC: 2
55-250-522: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-463-7732
Support Hook

144637732
696 500 858 000: RNCC: 3 | RNVC: 2

29 Jun 1993

5340-14-396-6449
Loop Clamp

143966449
3-2603-01-80A: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-320-3619
Clamping Catch

143203619
GP30ZB: RNCC: 3 | RNVC: 1
26256488: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-383-3258
Pad Eye

143833258
147953-51: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-453-5467
Mounting Plate

144535467
21326272: RNCC: 3 | RNVC: 2
21326272-1: RNCC: 5 | RNVC: 2

26 Feb 1992

5340-14-442-8063
Mounting Bracket

144428063
83860: RNCC: 3 | RNVC: 2

6 Nov 1990

5340-14-478-6278
Angle Bracket

144786278
307-134-501-0: RNCC: 3 | RNVC: 2

8 Nov 1995

5340-14-418-3307
Anchor Strap

144183307
4-453018: RNCC: 3 | RNVC: 9
4-453018: RNCC: 5 | RNVC: 2
4-453018: RNCC: 5 | RNVC: 9

12 Aug 1987

5340-14-396-2747
Access Cover

143962747
NO PRIMARY REF14-396-2747: RNCC: 3 | RNVC: 2
3689-3: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-424-1843
Access Cover

144241843
4-452912: RNCC: 3 | RNVC: 9

19 May 1988

5340-14-433-9193
Loop Clamp

144339193
RP988758: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-14-227-9279
Recess Handle

142279279
C234464: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-490-5630
Control Rod

144905630
J05085-01-0100P012: RNCC: 3 | RNVC: 2

2 Oct 1997

5340-14-354-3997
Angle Bracket

143543997
21313176: RNCC: 3 | RNVC: 2
21313176-5: RNCC: 5 | RNVC: 2

31 Jan 1979

5340-14-458-7796
Cushioning Pad

144587796
MN03/09-54: RNCC: 3 | RNVC: 2
MN03/09-58: RNCC: 5 | RNVC: 2

4 Nov 1992

5340-14-485-0557
Mounting Bracket

144850557
332A21-0000-1281: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-14-464-9974
Blank Panel

144649974
365P61-3851-22: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-543-0389
Pipe Hanger

145430389
78731-046-100: RNCC: 3 | RNVC: 2

18 Aug 2004

5340-14-473-6570
Mounting Plate

144736570
332A61-3125-04: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-349-7532
Angle Bracket

143497532
053M53-566036K: RNCC: 3 | RNVC: 2
0566036K00: RNCC: 5 | RNVC: 2

14 Jun 1978

5340-14-468-0596
Cover Strip

144680596
312-15480-001: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-257-1024
Lock Bolt

142571024
330A57-4056-0051: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-475-8558
Handle Grip

144758558
355A81-0135-00: RNCC: 3 | RNVC: 2

10 May 1995

5340-14-468-0081
Mounting Bracket

144680081
350A65-1462-20: RNCC: 3 | RNVC: 2

7 Feb 1994

5340-14-461-1650
Angle Bracket

144611650
4772820190: RNCC: 3 | RNVC: 2
5046072: RNCC: 5 | RNVC: 9

24 Feb 1993

5340-14-313-5706
Turnbuckle Body

143135706
36161BC06L: RNCC: 2 | RNVC: 2
L36161-6BCL: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-466-1374
Webbing Strap

144661374
5231003: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-14-471-6909
Angle Bracket

144716909
511101-00: RNCC: 3 | RNVC: 2
Z00.N7087780100: RNCC: 5 | RNVC: 2
Z00.N7087780100TBM: RNCC: 5 | RNVC: 9

7 Sep 1994

5340-14-360-1970
Bumper

143601970
316-303: RNCC: 3 | RNVC: 9
316-303: RNCC: 5 | RNVC: 9

31 Oct 1979

5340-14-453-4217
Mounting Bracket

144534217
NO PRIMARY REF14-453-4217: RNCC: 3 | RNVC: 2
431804: RNCC: 5 | RNVC: 2

19 Feb 1992

5340-14-466-1417
Plate Spacer

144661417
5230405: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-14-435-4960
Plate Spacer

144354960
544002: RNCC: 3 | RNVC: 9

8 Nov 1989

5340-14-496-9122
Mounting Bracket

144969122
490125-32029-00: RNCC: 3 | RNVC: 2
F300 0T 022 2619: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-505-1520
Section Block Clamp

145051520
F708-49-03: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-466-1715
Mounting Plate

144661715
161417: RNCC: 3 | RNVC: 2
89169797: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-484-4416
Bridge Clamp

144844416
110P316: RNCC: 3 | RNVC: 2
4152: RNCC: 5 | RNVC: 2
AS45052/04: RNCC: 5 | RNVC: 2

14 Nov 1996

5340-14-366-1416
Magnetic Catch

143661416
301200009: RNCC: 3 | RNVC: 2
301200009: RNCC: 3 | RNVC: 9
36780: RNCC: 5 | RNVC: 9

4 Nov 1980

5340-14-310-0724
Pipe Hanger

143100724
A10-50-125-00-0: RNCC: 3 | RNVC: 2
A10-50-125-00-0: RNCC: 5 | RNVC: 2
A10-50-125-00-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-467-6043
Loop Clamp

144676043
501-880-511-0: RNCC: 3 | RNVC: 2

19 Jan 1994

5340-14-403-9203
Runner

144039203
NO PRIMARY REF14-403-9203: RNCC: 3 | RNVC: 2
P1H002819-00: RNCC: 5 | RNVC: 9

11 Sep 1985

5340-14-380-4641
Mending Plate

143804641
535394: RNCC: 3 | RNVC: 2
00535394: RNCC: 5 | RNVC: 2

29 Nov 1982

5340-14-394-4808
Angle Bracket

143944808
NO PRIMARY REF14-394-4808: RNCC: 3 | RNVC: 2
11551-4: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-336-8016
Bail Handle

143368016
19-7-3338: RNCC: 3 | RNVC: 2
A25904: RNCC: 5 | RNVC: 2
00726005205: RNCC: 5 | RNVC: 9
D2652PGT200-1D: RNCC: 5 | RNVC: 9

7 Oct 1976

5340-14-500-5248
Compression Cup

145005248
31066: RNCC: 3 | RNVC: 2
F300 0T 024 5421: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-334-8883
Rod End Clevis

143348883
880-16-0-187-0: RNCC: 3 | RNVC: 2

2 Jun 1976

5340-14-464-8353
Runner

144648353
0766205P02: RNCC: 3 | RNVC: 2

1 Sep 1993

5340-14-513-6693
Angle Bracket

145136693
307-845-504-0: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-14-292-7476
Butt Hinge

142927476
98-55-02-8: RNCC: 3 | RNVC: 2
9855-02-8: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-447-1332
Angle Bracket

144471332
851-600-785-0: RNCC: 3 | RNVC: 2

3 May 1991

5340-14-465-0789
Quick Release Pin

144650789
DAR5-221: RNCC: 3 | RNVC: 2

10 Sep 1993

5340-14-549-4144
Mounting Plate

145494144
252478977-00: RNCC: 3 | RNVC: 2
25247897-7: RNCC: 5 | RNVC: 2

30 Mar 2006

5340-14-407-0236
Swivel Caster

144070236
SP4BA100-77L: RNCC: 3 | RNVC: 2

29 Jan 1986

5340-14-256-5664
Loop Clamp

142565664
NO PRIMARY REF14-256-5664: RNCC: 3 | RNVC: 2
1029-4: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-387-7628
Rod End Clevis

143877628
ST159-2M312P37: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-14-421-1449
Swivel Caster

144211449
127-3100BR: RNCC: 3 | RNVC: 9
N127-3100BXR: RNCC: 5 | RNVC: 9
MPR127-3100BR: RNCC: 5 | RNVC: 9

6 Jan 1988

5340-14-538-7721
Handwheel

145387721
NGM0011040318257: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-431-6094
Butt Hinge

144316094
39533329: RNCC: 3 | RNVC: 2
1001-35X22AD: RNCC: 5 | RNVC: 1
39533329: RNCC: 5 | RNVC: 9

26 Apr 1989

5340-14-553-7856
Mounting Bracket

145537856
XUZA51: RNCC: 3 | RNVC: 2

22 May 2007

5340-14-427-4228
Runner

144274228
441180: RNCC: 3 | RNVC: 2
441180: RNCC: 5 | RNVC: 9

19 Oct 1988

5340-14-509-6808
Cover Strip

145096808
RA1M705232240: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-433-9212
Mounting Plate

144339212
RP988801: RNCC: 3 | RNVC: 2

23 Aug 1989

5340-14-512-9271
Butt Hinge

145129271
79570: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-509-6890
Section Block Clamp

145096890
RA1M216900612: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-550-4690
Angle Bracket

145504690
RA1B701712551N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-435-5194
Cover Strip

144355194
DA1N289711131: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-14-317-2224
Angle Bracket

143172224
0177310030: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-423-9470
Retaining Strap

144239470
535865: RNCC: 3 | RNVC: 2

5 May 1988

5340-14-525-7714
Loop Clamp

145257714
B102083: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-551-5221
Mounting Plate

145515221
RA1M702202381A1: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-451-2170
Pipe Hanger

144512170
PM1A527124010: RNCC: 3 | RNVC: 2
PM1A527124010: RNCC: 5 | RNVC: 2

6 Nov 1991

5340-14-551-2895
Angle Bracket

145512895
RA1M701966351: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-533-9953
Mounting Bracket

145339953
713078: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-040-5149
Retaining Strap

140405149
08842200020: RNCC: 3 | RNVC: 2
88422: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-541-5298
Mounting Bracket

145415298
1091613: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-527-3472
Bumper

145273472
19218925: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-381-4509
Loop Clamp

143814509
61500001036: RNCC: 3 | RNVC: 2
241N36: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-518-7293
Mounting Bracket

145187293
T713A0001807: RNCC: 3 | RNVC: 2

16 Feb 2000

5340-14-520-8163
Snap Hook

145208163
CI5124051N: RNCC: 3 | RNVC: 2

14 Jun 2000

5340-14-238-5320
Mending Plate

142385320
81125: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-517-0788
Mounting Plate

145170788
MP1786F01: RNCC: 3 | RNVC: 2

3 Nov 1999

5340-14-230-6451
Retaining Strap

142306451
DLT001403: RNCC: 3 | RNVC: 2
DLT01403: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-264-3099
Mending Plate

142643099
9013BC20-01: RNCC: 3 | RNVC: 2
9013BC20-01: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-393-1007
Runner

143931007
96101798F2427: RNCC: 3 | RNVC: 2
96101798: RNCC: 5 | RNVC: 9
96101798: RNCC: 5 | RNVC: 9

12 Apr 1984

5340-14-551-1499
Mounting Bracket

145511499
1SH41837305: RNCC: 3 | RNVC: 2

29 Aug 2006

5340-14-490-2865
Access Cover

144902865
J05085-04-0220P005: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-448-8709
Mounting Plate

144488709
441970C: RNCC: 3 | RNVC: 2

24 Jul 1991

5340-14-439-3150
Cover Strip

144393150
DA2C284038017: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-433-4262
Mounting Plate

144334262
0803135F00: RNCC: 3 | RNVC: 2

25 Jul 1989

5340-14-509-1280
Mounting Plate

145091280
ER4038: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-303-1167
Rod End Clevis

143031167
M3B216-25-02: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-348-5528
Corner Brace

143485528
330A21-2062-22: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-371-1479
Rod End Clevis

143711479
341A41-5234-00: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-535-5113
Eye Hook

145355113
10-300-691: RNCC: 3 | RNVC: 2
SZ10.300.691: RNCC: 3 | RNVC: 2

31 May 2003

5340-14-490-3075
Mounting Bracket

144903075
J05085-01-0310P003: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-549-4138
Mounting Plate

145494138
252319962-00: RNCC: 3 | RNVC: 2
25231996-2: RNCC: 5 | RNVC: 2

30 Mar 2006

5340-14-568-8218
Utility Resilient Mount

145688218
BFN45-60: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-14-380-7289
Anchor Strap

143807289
453-10398-000: RNCC: 3 | RNVC: 2
M397-02-54-15-10: RNCC: 3 | RNVC: 2

29 Nov 1982

5340-14-363-9059
Clamping Catch

143639059
M376-326000: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-220-4849
Mending Plate

142204849
NO PRIMARY REF14-220-4849: RNCC: 3 | RNVC: 2
631449: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-340-3163
Angle Bracket

143403163
M3C704-160: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-533-9891
Shelf Bracket

145339891
2P90461-00: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-449-8723
Snap Hook

144498723
4030-25-302: RNCC: 3 | RNVC: 2
4030-25-32: RNCC: 5 | RNVC: 2
5044990: RNCC: 5 | RNVC: 9

11 Sep 1991

5340-14-341-0432
Clamping Catch

143410432
100SP36-0002: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-512-5529
Pipe Hanger

145125529
F710-10: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-394-2936
Handwheel

143942936
M4ZS460D1268: RNCC: 3 | RNVC: 2

28 Aug 1984

5340-14-399-9217
Door Handle

143999217
0026587L: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-449-3747
Mounting Plate

144493747
DA1N201794180: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-545-6987
Mounting Bracket

145456987
RA1A703656211: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-436-6175
Mounting Plate

144366175
DA2C202210418: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-445-0561
Mounting Bracket

144450561
112902: RNCC: 3 | RNVC: 2

31 Jan 1991

5340-14-551-4938
Angle Bracket

145514938
RA1B701303751N1: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-211-0746
Access Cover

142110746
15557: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-212-5712
Retaining Strap

142125712
0000136320: RNCC: 3 | RNVC: 2
0000136319: RNCC: 5 | RNVC: 2
0000136320: RNCC: 5 | RNVC: 9
136320: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-482-5596
Retaining Strap

144825596
ALZ082055023020: RNCC: 3 | RNVC: 2

11 Jul 1996

5340-14-373-1665
Clamping Catch

143731665
KFG205: RNCC: 3 | RNVC: 2

21 Oct 1981

5340-14-547-0028
Loop Clamp

145470028
51313105009: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-14-485-6291
Access Cover

144856291
NM30803: RNCC: 3 | RNVC: 2

6 Feb 1997

5340-14-547-8338
Mounting Bracket

145478338
V001072: RNCC: 3 | RNVC: 2

17 Nov 2005

5340-14-245-3374
Angle Bracket

142453374
79001263: RNCC: 3 | RNVC: 2
79001263: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-394-9439
Mounting Plate

143949439
20320663: RNCC: 3 | RNVC: 2
20320663: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-483-4138
Blank Panel

144834138
TOL00669: RNCC: 3 | RNVC: 2

12 Sep 1996

5340-14-552-4144
Mounting Bracket

145524144
10632265001: RNCC: 3 | RNVC: 2

20 Dec 2006

5340-14-434-0391
Mounting Bracket

144340391
537811: RNCC: 3 | RNVC: 2

29 Aug 1989

5340-14-296-3659
Angle Bracket

142963659
CAP10-50-38-02: RNCC: 3 | RNVC: 9

1 Jan 1973

5340-14-512-3035
Mounting Bracket

145123035
2022116G: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-14-437-2174
Anchor Strap

144372174
U22228-07: RNCC: 3 | RNVC: 2
546029: RNCC: 5 | RNVC: 2

23 Jan 1990

5340-14-443-0535
Cover Strip

144430535
PM1A218200049: RNCC: 3 | RNVC: 2
PM1A218200049: RNCC: 5 | RNVC: 2

7 Nov 1990

5340-14-346-2058
Access Cover

143462058
AM331-3C: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-420-5138
Rod End Clevis

144205138
160G262136-12: RNCC: 3 | RNVC: 2

10 Dec 1987

5340-14-443-0520
Cover Strip

144430520
PM1A218100015: RNCC: 3 | RNVC: 2
PM1A218100015: RNCC: 5 | RNVC: 2

7 Nov 1990

5340-14-540-5235
Mounting Bracket

145405235
125M279: RNCC: 3 | RNVC: 2
19208141: RNCC: 3 | RNVC: 2

1 Apr 2004

5340-14-369-8957
Retaining Strap

143698957
DS124-95: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-517-3246
Mounting Bracket

145173246
F1262326: RNCC: 3 | RNVC: 2
F1262326: RNCC: 5 | RNVC: 2

2 Dec 1999

5340-14-402-6512
Retaining Strap

144026512
400395: RNCC: 3 | RNVC: 2
BGE400395: RNCC: 5 | RNVC: 2
MAF0001006383: RNCC: 6 | RNVC: 9

19 Jul 1985

5340-14-563-8234
Utility Resilient Mount

145638234
714312: RNCC: 3 | RNVC: 2

18 Mar 2010

5340-14-472-3752
Pipe Hanger

144723752
PM1A522144006: RNCC: 3 | RNVC: 2
PM1A522144006: RNCC: 5 | RNVC: 2

19 Oct 1994

5340-14-310-2266
Retaining Strap

143102266
GSM1290DET12: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-370-5544
Anchor Strap

143705544
1551024: RNCC: 3 | RNVC: 2
1551024: RNCC: 5 | RNVC: 2

18 May 1981

5340-14-266-4274
Access Cover

142664274
151530: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-478-8230
Dashpot

144788230
96088/96089: RNCC: 3 | RNVC: 2

22 Nov 1995

5340-14-482-5012
Angle Bracket

144825012
PM1A711124128: RNCC: 3 | RNVC: 2
PM1A711124128: RNCC: 5 | RNVC: 2

11 Jul 1996

5340-14-528-9133
Locking Stay

145289133
10516335: RNCC: 3 | RNVC: 2

22 Feb 2002

5340-14-468-1374
Mounting Bracket

144681374
554439: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-439-1981
Angle Bracket

144391981
16009764: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-399-0808
Anchor Strap

143990808
234975: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-515-8103
Access Cover

145158103
101060010025A: RNCC: 3 | RNVC: 9

6 Aug 1999

5340-14-326-9328
Access Cover

143269328
176281: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-381-1750
Extension Shaft

143811750
26421582: RNCC: 3 | RNVC: 2
26421582A: RNCC: 5 | RNVC: 2
C421582: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-362-5452
Angle Bracket

143625452
225581: RNCC: 3 | RNVC: 2

19 Mar 1980

5340-14-540-7980
Retaining Strap

145407980
16211: RNCC: 3 | RNVC: 2

23 Apr 2004

5340-14-554-3338
Mounting Bracket

145543338
82170737000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-545-6910
Angle Bracket

145456910
RA1A703856221: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-429-1996
Lock Key

144291996
13153E: RNCC: 3 | RNVC: 2
13153E: RNCC: 5 | RNVC: 2

11 Jan 1989

5340-14-273-8976
Loop Clamp

142738976
222803: RNCC: 3 | RNVC: 2
RAB9100: RNCC: 5 | RNVC: 2
122803B: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-415-2370
Corner Brace

144152370
6400510000: RNCC: 3 | RNVC: 2

21 Apr 1987

5340-14-392-8151
Mounting Plate

143928151
02-07-14: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-388-4953
Bow Handle

143884953
129164: RNCC: 3 | RNVC: 9

3 Nov 1983

5340-14-300-1413
Retaining Strap

143001413
61108: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-341-1382
Runner

143411382
308912: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-498-9418
Mounting Bracket

144989418
5000823544: RNCC: 3 | RNVC: 2
73582: RNCC: 5 | RNVC: 9
F300 0T 013 2499: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-365-5718
Mending Plate

143655718
413326: RNCC: 3 | RNVC: 2
413326: RNCC: 5 | RNVC: 2

19 Sep 1980

5340-14-379-0995
Bow Handle

143790995
T62151010102: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-357-5389
Pipe Hanger

143575389
A11A232260100A1: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-532-4794
Bumper

145324794
8037080E00: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-14-551-4588
Mounting Bracket

145514588
713496: RNCC: 3 | RNVC: 2

25 Sep 2006

5340-14-332-9690
Mending Plate

143329690
184079: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-549-0904
Angle Bracket

145490904
RA1M701772211N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-550-4652
Angle Bracket

145504652
RA1B216901691A1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-549-1956
Loop Clamp

145491956
5000288100: RNCC: 3 | RNVC: 2

8 Mar 2006

5340-14-549-0714
Mounting Bracket

145490714
RA1M211001161N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-553-0541
Angle Bracket

145530541
RA1M812420251: RNCC: 3 | RNVC: 2

27 Feb 2007

5340-14-416-7794
Mending Plate

144167794
1101147: RNCC: 3 | RNVC: 9

25 Jun 1987

5340-14-536-3665
Mounting Bracket

145363665
56947707: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-14-509-1497
Mounting Bracket

145091497
ER3231: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-486-3339
Retaining Strap

144863339
30620002: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-295-1204
Plate Spacer

142951204
281159: RNCC: 3 | RNVC: 2
281159: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-383-3650
Bumper

143833650
213473: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-457-7376
Mounting Bracket

144577376
0372-14-21000: RNCC: 3 | RNVC: 2

17 Sep 1992

5340-14-437-8866
Metal Grille

144378866
1006114: RNCC: 3 | RNVC: 2
1006114: RNCC: 5 | RNVC: 2

21 Feb 1990

5340-14-415-5910
Loop Clamp

144155910
52213105024: RNCC: 3 | RNVC: 2
110G24: RNCC: 5 | RNVC: 2

18 May 1987

5340-14-031-1715
Angle Bracket

140311715
VDP4935: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-335-8803
Retaining Strap

143358803
193917: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-396-5218
Angle Bracket

143965218
213979: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-552-8852
Mounting Plate

145528852
82072915000: RNCC: 3 | RNVC: 2

10 Feb 2007

5340-14-487-5546
Angle Bracket

144875546
78721DH34C1: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-549-2659
Pipe Hanger

145492659
5010571737: RNCC: 3 | RNVC: 2

16 Mar 2006

5340-14-451-0099
Rod End Connector

144510099
24539001700: RNCC: 3 | RNVC: 2
43900081: RNCC: 3 | RNVC: 2
CHAPE-MALE06-07-15ALES32: RNCC: 5 | RNVC: 2

23 Oct 1991

5340-14-278-5228
Webbing Strap

142785228
50261-18: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-501-7787
Access Cover

145017787
NO PRIMARY REF14-501-7787: RNCC: 3 | RNVC: 2
300 157 118: RNCC: 5 | RNVC: 9
4533 178 001 120: RNCC: 5 | RNVC: 9
F300 0T 000 9459: RNCC: 6 | RNVC: 9

10 Nov 1997

5340-14-549-5911
Clamp Bolt Assembly

145495911
40 073-14: RNCC: 3 | RNVC: 2
40073-14: RNCC: 3 | RNVC: 2
40 073-14 & -21: RNCC: 5 | RNVC: 9

20 Apr 2006

5340-14-290-3692
Corner Brace

142903692
243: RNCC: 3 | RNVC: 2
85-800-7879: RNCC: 6 | RNVC: 9

1 Jan 1972

5340-14-527-3343
Access Cover

145273343
21226618-00: RNCC: 3 | RNVC: 2
21226618-9: RNCC: 5 | RNVC: 2

24 Oct 2001

5340-14-292-3255
Loop Clamp

142923255
JRAT01-24: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-529-0453
Mounting Plate

145290453
128E475-01: RNCC: 3 | RNVC: 2
128E475-01: RNCC: 5 | RNVC: 9

6 Mar 2002

5340-14-465-7946
Threaded Rod End

144657946
7502-0417: RNCC: 3 | RNVC: 2

14 Oct 1993

5340-14-247-3265
Rod End Clevis

142473265
321A57-0321-21: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-518-2049
Plug Button

145182049
45314/21: RNCC: 3 | RNVC: 2
RU45314: RNCC: 5 | RNVC: 2

26 Jan 2000

5340-14-382-4934
Pipe Hanger

143824934
NO PRIMARY REF14-382-4934: RNCC: 3 | RNVC: 2
16932728: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-339-9728
Retaining Strap

143399728
SQ9-07-01-06: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-543-3165
Mounting Bracket

145433165
9105220P092: RNCC: 3 | RNVC: 2

20 Oct 2004

5340-14-547-9195
Mounting Plate

145479195
8042759C00: RNCC: 3 | RNVC: 2

24 Nov 2005

5340-14-296-3534
Angle Bracket

142963534
CAP10-20-09-022: RNCC: 3 | RNVC: 9

1 Jan 1973

5340-14-514-4748
Angle Bracket

145144748
47138665: RNCC: 3 | RNVC: 2
47138665: RNCC: 5 | RNVC: 2
IF-192-0453: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-524-2159
Turnbuckle Body

145242159
EA5M701-10-895: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-449-0182
Mounting Plate

144490182
721B6002: RNCC: 3 | RNVC: 2
89469783: RNCC: 5 | RNVC: 2

24 Jul 1991

5340-14-426-7770
Webbing Strap

144267770
5000988168: RNCC: 3 | RNVC: 2
4-012-0054: RNCC: 3 | RNVC: 2

21 Sep 1988

5340-14-443-1444
Cover Strip

144431444
DA2C244926703A2: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-14-505-0935
Mounting Plate

145050935
132867: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-462-1271
Loop Clamp

144621271
LN400011REP I2: RNCC: 3 | RNVC: 2
RAB0811: RNCC: 5 | RNVC: 2

6 Apr 1993

5340-14-554-0832
Loop Clamp

145540832
604 078: RNCC: 3 | RNVC: 2
604 078: RNCC: 3 | RNVC: 2

11 Jun 2007

5340-14-467-1131
Mounting Bracket

144671131
16959376: RNCC: 3 | RNVC: 2
16959376: RNCC: 5 | RNVC: 9

16 Dec 1993

5340-14-446-1248
Mounting Bracket

144461248
190246: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-507-6900
Mounting Bracket

145076900
10380583: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-14-534-8482
Mounting Plate

145348482
10664047000: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-14-508-7494
Metal Grille

145087494
19207805: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-14-502-4924
Mounting Bracket

145024924
5000270364: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-483-5224
Mounting Plate

144835224
1090287N00: RNCC: 3 | RNVC: 2

18 Sep 1996

5340-14-312-0061
Webbing Strap

143120061
TH20G1334-4: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-467-1186
Retaining Strap

144671186
164176: RNCC: 3 | RNVC: 2
89170005: RNCC: 5 | RNVC: 2

16 Dec 1993

5340-14-441-1361
Bridge Clamp

144411361
16766406: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-540-3336
Mounting Bracket

145403336
NNP5360840450128: RNCC: 3 | RNVC: 2

18 Mar 2004

5340-14-533-2890
Cover Strip

145332890
SZ12.250.336: RNCC: 3 | RNVC: 2
12-250-336: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-441-5909
Angle Bracket

144415909
E05400103: RNCC: 3 | RNVC: 2

4 Sep 1990

5340-14-307-1146
Anchor Strap

143071146
454205648: RNCC: 3 | RNVC: 9

1 Jan 1974

5340-14-447-2940
Corner Brace

144472940
5002288: RNCC: 3 | RNVC: 2

15 May 1991

5340-14-461-1684
Rod End Connector

144611684
4772920300: RNCC: 3 | RNVC: 2
5046032: RNCC: 5 | RNVC: 9

24 Feb 1993

5340-14-370-5291
Access Cover

143705291
16323852: RNCC: 3 | RNVC: 2
5801425-912.004: RNCC: 5 | RNVC: 2
16323852: RNCC: 5 | RNVC: 2
16323852: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-448-1843
Loop Clamp

144481843
SP621,3PPRDPAS: RNCC: 3 | RNVC: 2
RAR3482: RNCC: 5 | RNVC: 2
RI SP621-3PPDPAS: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-276-2786
Rod End Clevis

142762786
160-61515-01: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-413-8439
Loop Clamp

144138439
01860060018: RNCC: 3 | RNVC: 2
186060-11: RNCC: 5 | RNVC: 2
186060-18: RNCC: 5 | RNVC: 2
3597470008157: RNCC: 5 | RNVC: 2
186060: RNCC: 5 | RNVC: 2
365/78: RNCC: 5 | RNVC: 2

21 Jan 1987

5340-14-369-2682
Detent Plunger

143692682
366A25-1002-20: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-337-3778
Plug Button

143373778
EA1M240-21-820: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-453-6528
Loop Clamp

144536528
TB30-42107-000: RNCC: 3 | RNVC: 2

4 Mar 1992

5340-14-480-5662
Rod End Clevis

144805662
002420560A: RNCC: 3 | RNVC: 2
8600-114: RNCC: 3 | RNVC: 2

14 Mar 1996

5340-14-420-6495
Plug Button

144206495
ZF07531065: RNCC: 3 | RNVC: 2
7429-21: RNCC: 3 | RNVC: 2
7531065: RNCC: 5 | RNVC: 2
ZF07531065: RNCC: 5 | RNVC: 2

16 Dec 1987

5340-14-523-5746
Utility Access Door

145235746
5721-498-0070-02: RNCC: 3 | RNVC: 9

29 Jan 2001

5340-14-534-9950
Cover Strip

145349950
00027222: RNCC: 3 | RNVC: 2
89346563: RNCC: 5 | RNVC: 2

23 Apr 2003

5340-14-417-5454
Mounting Plate

144175454
4679A421REP14: RNCC: 3 | RNVC: 2
589016: RNCC: 5 | RNVC: 2

8 Jul 1987

5340-14-500-3483
Control Rod

145003483
D61301400100: RNCC: 3 | RNVC: 2
F300 0T 024 3574: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-457-7700
Pipe Hanger

144577700
402229A-SG10137-Z2CND17-12: RNCC: 3 | RNVC: 2

17 Sep 1992

5340-14-532-5419
Mounting Bracket

145325419
8035853Q00: RNCC: 3 | RNVC: 2

13 Nov 2002

5340-14-302-9034
Threaded Rod End

143029034
41133A: RNCC: 3 | RNVC: 2
41133: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-441-5898
Mounting Bracket

144415898
E05400325: RNCC: 3 | RNVC: 2

4 Sep 1990

5340-14-481-8970
Lock-Release Lever

144818970
HSS831AH567: RNCC: 3 | RNVC: 2
89167382: RNCC: 5 | RNVC: 2

6 Jun 1996

5340-14-431-9717
Block Clamp

144319717
39218565: RNCC: 3 | RNVC: 2

18 May 1989

5340-14-335-8750
Anchor Strap

143358750
191532: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-518-8530
Utility Access Door

145188530
C281C2040102: RNCC: 3 | RNVC: 2
C281C2040102: RNCC: 5 | RNVC: 2

23 Feb 2000

5340-14-338-6145
Access Cover

143386145
18477: RNCC: 3 | RNVC: 2
5800400003: RNCC: 5 | RNVC: 2
5800400003: RNCC: 5 | RNVC: 9

17 Dec 1976

5340-14-351-0116
Angle Bracket

143510116
214906: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-305-3536
Rod End Clevis

143053536
TH20C304: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-553-0557
Mounting Bracket

145530557
RA1M210103221N1: RNCC: 3 | RNVC: 2

27 Feb 2007

5340-14-524-5165
Access Cover

145245165
T62225012400: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-14-461-6836
Mounting Bracket

144616836
A11A767020010A1: RNCC: 3 | RNVC: 2

22 Mar 1993

5340-14-379-6789
Clamping Catch

143796789
2386: RNCC: 3 | RNVC: 2
2386: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-527-5539
Access Cover

145275539
MBEU162625: RNCC: 3 | RNVC: 2

30 Oct 2001

5340-14-546-4951
Access Cover

145464951
61225043AA: RNCC: 3 | RNVC: 2

8 Jul 2005

5340-14-347-1967
Luggage Handle

143471967
N561: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-14-488-1275
Access Cover

144881275
10269748: RNCC: 3 | RNVC: 2

18 Apr 1997

5340-14-418-2184
Access Cover

144182184
0319101480: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-404-5476
Swivel Caster

144045476
13617: RNCC: 3 | RNVC: 9

20 Nov 1985

5340-14-222-7517
Bail Handle

142227517
DF20571: RNCC: 3 | RNVC: 9
DF20571A: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-517-6404
Access Cover

145176404
CRM280150311: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-516-9802
Access Cover

145169802
B001G007: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-392-8171
Access Cover

143928171
5000560134: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-250-3621
Retaining Strap

142503621
ST406M52P566: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-549-0906
Angle Bracket

145490906
RA1M702202661N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-574-6962
Utility Guard Rail Section

145746962
19240951: RNCC: 3 | RNVC: 2

13 Feb 2013

5340-14-472-4535
Mounting Bracket

144724535
DXX1104: RNCC: 3 | RNVC: 2

26 Oct 1994

5340-14-501-5746
Butt Hinge

145015746
45-80: RNCC: 3 | RNVC: 2

5 Nov 1997

5340-14-497-3906
Loop Clamp

144973906
13937: RNCC: 3 | RNVC: 2
13937: RNCC: 3 | RNVC: 9
F300 0T 023 1170: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-551-2885
Retaining Strap

145512885
RA1M701416111: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-543-3311
Mounting Bracket

145433311
105100G001: RNCC: 3 | RNVC: 2

20 Oct 2004

5340-14-479-3499
Mounting Plate

144793499
AT100PD600002: RNCC: 3 | RNVC: 9

10 Jan 1996

5340-14-519-3450
Mounting Plate

145193450
C310A1106101: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-354-0728
Butt Hinge

143540728
A11B761510048: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-348-7046
Retaining Strap

143487046
1145159: RNCC: 3 | RNVC: 2
1145159: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-514-2941
Angle Bracket

145142941
ZF1048FL2010: RNCC: 3 | RNVC: 9
1585M233: RNCC: 5 | RNVC: 2
FIX.LATERALE ACCESSOIRES: RNCC: 5 | RNVC: 9

6 May 1999

5340-14-479-3467
Lock-Release Lever

144793467
AT004PD006001: RNCC: 3 | RNVC: 9

10 Jan 1996

5340-14-515-1098
Loop Clamp

145151098
EN4113S32NR: RNCC: 2 | RNVC: 2

7 Jul 1999

5340-14-031-8377
Mending Plate

140318377
VDP0816: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-403-4417
Runner

144034417
8020200: RNCC: 3 | RNVC: 2
313025: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-550-6016
Mounting Bracket

145506016
SP01001904A: RNCC: 3 | RNVC: 2

29 Jun 2006

5340-14-544-3267
Mounting Bracket

145443267
22355-865: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-14-487-6375
Angle Bracket

144876375
009255226P: RNCC: 3 | RNVC: 2

16 Apr 1997

Load More Results