What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 132 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 132 of 446

5340-14-537-9016
Access Cover

145379016
10693637000: RNCC: 3 | RNVC: 2

3 Dec 2003

5340-14-462-6679
Access Cover

144626679
71223: RNCC: 3 | RNVC: 2
65224: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-14-480-8281
Access Cover

144808281
702555: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-14-442-1042
Mounting Bracket

144421042
410622: RNCC: 3 | RNVC: 2
BLB410622: RNCC: 5 | RNVC: 2

1 Oct 1990

5340-14-512-0792
Access Cover

145120792
0062934: RNCC: 3 | RNVC: 2

3 Feb 1999

5340-14-425-5009
Access Cover

144255009
4262447: RNCC: 3 | RNVC: 2
4262447: RNCC: 5 | RNVC: 9

7 Jul 1988

5340-14-417-0881
Access Cover

144170881
TH20B907: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-14-481-0597
Anchor Strap

144810597
264405: RNCC: 3 | RNVC: 2

18 Apr 1996

5340-14-376-4596
Access Cover

143764596
16558674: RNCC: 3 | RNVC: 2
16558674: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-519-2458
Access Cover

145192458
FGFB910012A1: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-441-0390
Bridge Clamp

144410390
8730028: RNCC: 3 | RNVC: 2
98730028: RNCC: 5 | RNVC: 2

16 Aug 1990

5340-14-505-6191
Access Cover

145056191
4200416: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-399-0646
Anchor Strap

143990646
0428259100: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-505-7724
Access Cover

145057724
097718: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-371-3807
Anchor Strap

143713807
004391035P: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-497-5136
Rod End Clevis

144975136
202426001050: RNCC: 3 | RNVC: 2
F300 0T 023 2904: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-452-9008
Plug Button

144529008
GE25: RNCC: 3 | RNVC: 2

27 Jan 1992

5340-14-538-2189
Handwheel

145382189
NGM0010032981207: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-433-4380
Access Cover

144334380
184074: RNCC: 3 | RNVC: 2

25 Jul 1989

5340-14-512-8112
Bow Handle

145128112
194587: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-554-8865
Loop Clamp

145548865
78651DH16AP: RNCC: 1 | RNVC: 2
78651DH16AP: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-463-0150
Angle Bracket

144630150
0000781441: RNCC: 3 | RNVC: 2

12 May 1993

5340-14-382-1695
Access Cover

143821695
706127: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-479-8004
Access Cover

144798004
11095T430304: RNCC: 3 | RNVC: 2

7 Feb 1996

5340-14-418-5975
Rod End Clevis

144185975
R12608D8AEL: RNCC: 2 | RNVC: 2

2 Sep 1987

5340-14-553-0493
Angle Bracket

145530493
RA1N702346327N1: RNCC: 3 | RNVC: 2

27 Feb 2007

5340-14-251-0877
Luggage Handle

142510877
K2CUIRN0IRCPN: RNCC: 3 | RNVC: 2
K2CUIRN0IRCPN: RNCC: 5 | RNVC: 2
104358: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-455-8649
Mounting Bracket

144558649
564365: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-479-3514
Mounting Plate

144793514
FH01PD210008: RNCC: 3 | RNVC: 9

10 Jan 1996

5340-14-554-5417
Access Cover

145545417
0298180650: RNCC: 3 | RNVC: 2

18 Jul 2007

5340-14-462-5506
Magnetic Catch

144625506
VEAPCTK48V: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-14-401-1054
Bridge Clamp

144011054
605232: RNCC: 3 | RNVC: 2

29 May 1985

5340-14-435-4706
Angle Bracket

144354706
DA2C201714307A1: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-14-541-7817
Bumper

145417817
211445: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-442-2131
Access Cover

144422131
8815437811: RNCC: 3 | RNVC: 2
89451629: RNCC: 5 | RNVC: 2

3 Oct 1990

5340-14-461-8974
Rod End Clevis

144618974
T700A2740099100: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-544-5579
Padlock

145445579
044 43: RNCC: 3 | RNVC: 2
04443: RNCC: 5 | RNVC: 2
AA003831: RNCC: 6 | RNVC: 9

10 Feb 2005

5340-14-521-3421
Utility Access Door

145213421
10492515: RNCC: 3 | RNVC: 2

20 Jul 2000

5340-14-457-8682
Mounting Bracket

144578682
101A101221: RNCC: 3 | RNVC: 2
A101221: RNCC: 5 | RNVC: 2
101A101221: RNCC: 5 | RNVC: 9

24 Sep 1992

5340-14-545-4440
Angle Bracket

145454440
RA1B701756183: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-418-1382
Angle Bracket

144181382
121339: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-270-9934
Retaining Strap

142709934
204711: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-299-8547
Access Cover

142998547
11217030Z: RNCC: 3 | RNVC: 2
21703: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-381-3178
Anchor Strap

143813178
2206-481B525: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-353-3078
Loop Clamp

143533078
052184: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-369-8299
Anchor Strap

143698299
12506376: RNCC: 3 | RNVC: 2
12506376: RNCC: 3 | RNVC: 9

17 Apr 1981

5340-14-447-7034
Plug Button

144477034
NGS1J2148: RNCC: 3 | RNVC: 2

29 May 1991

5340-14-493-1080
Bridge Clamp

144931080
0000716550: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-382-9563
Anchor Strap

143829563
BAZ92130: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-549-9754
Access Cover

145499754
F1262581: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-363-1124
Retaining Strap

143631124
223614: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-14-379-7592
Anchor Strap

143797592
BAZ1985: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-440-9240
Access Cover

144409240
2100995: RNCC: 3 | RNVC: 2
100995Y: RNCC: 5 | RNVC: 9

8 Aug 1990

5340-14-323-2308
Access Cover

143232308
103-40-145: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-546-4887
Lock Key

145464887
1615-7271-00: RNCC: 3 | RNVC: 2
18826661-0: RNCC: 5 | RNVC: 2

7 Jul 2005

5340-14-490-1758
Thumb Latch

144901758
5302357.02 36.01 REP A: RNCC: 3 | RNVC: 2
5302357-02 36-01-REP A: RNCC: 5 | RNVC: 2
5302357-02 36-01REPA: RNCC: 5 | RNVC: 2
F300 0T 024 0752: RNCC: 6 | RNVC: 9

17 Sep 1997

5340-14-345-0956
Pipe Hanger

143450956
501-804-033-0: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-351-3011
Anchor Strap

143513011
121E52-445-02-0: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-526-9404
Mounting Bracket

145269404
21230842-00: RNCC: 3 | RNVC: 2
21230842-9: RNCC: 5 | RNVC: 2

19 Sep 2001

5340-14-213-2766
Synchro Clamp

142132766
S2334-1DG: RNCC: 3 | RNVC: 2
S2334-1: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-539-4238
Mounting Bracket

145394238
21023441-00: RNCC: 3 | RNVC: 2
21023441-0: RNCC: 5 | RNVC: 2

14 Jan 2004

5340-14-551-7902
Mounting Bracket

145517902
25225298-00: RNCC: 3 | RNVC: 2

24 Oct 2006

5340-14-477-6965
Access Cover

144776965
38658812: RNCC: 3 | RNVC: 2
38658812: RNCC: 5 | RNVC: 9

20 Sep 1995

5340-14-553-6884
Mounting Bracket

145536884
82183586000: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-438-8595
Bumper

144388595
0BEB00-656581X: RNCC: 3 | RNVC: 2
0656581X00: RNCC: 5 | RNVC: 2

10 Apr 1990

5340-14-352-6968
Quick Release Pin

143526968
16324402: RNCC: 3 | RNVC: 2
16324402: RNCC: 5 | RNVC: 9

14 Nov 1978

5340-14-452-4062
Plug Button

144524062
121E23-343-62-0: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-043-1415
Quick Release Pin

140431415
065U20-719557L: RNCC: 3 | RNVC: 2

10 Apr 1984

5340-14-300-8196
Rod End Clevis

143008196
2-13435: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-513-1019
Mounting Plate

145131019
802309477: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-14-360-2307
Mounting Bracket

143602307
16316143: RNCC: 3 | RNVC: 2
16316143: RNCC: 5 | RNVC: 9

23 Nov 1979

5340-14-445-2569
Pawl Fastener

144452569
51270: RNCC: 3 | RNVC: 2

6 Feb 1991

5340-14-496-2318
Utility Access Door

144962318
75095-0: RNCC: 3 | RNVC: 2
F300 0T 021 0497: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-514-1077
Mounting Bracket

145141077
5001044386: RNCC: 3 | RNVC: 2
5010044386: RNCC: 3 | RNVC: 2

26 Apr 1999

5340-14-553-9024
Loop Clamp

145539024
354 364: RNCC: 3 | RNVC: 2
354 364: RNCC: 3 | RNVC: 2

29 May 2007

5340-14-481-3801
Angle Bracket

144813801
259144: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-528-6037
Mounting Bracket

145286037
10518143: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-528-5830
Loop Clamp

145285830
921132: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-423-9438
Plug Button

144239438
HPP406-S-SS1: RNCC: 3 | RNVC: 2
010X9-5ST: RNCC: 5 | RNVC: 2

5 May 1988

5340-14-490-6467
Mounting Bracket

144906467
OMAGAINOX: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-485-7839
Mounting Bracket

144857839
10338395: RNCC: 3 | RNVC: 2

12 Feb 1997

5340-14-218-9674
Handwheel

142189674
773-410-220DET18: RNCC: 3 | RNVC: 2
773-410-223FF1: RNCC: 5 | RNVC: 9
773-410-220DET18: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-543-0297
Pipe Hanger

145430297
EA5M704-50-860: RNCC: 3 | RNVC: 2

18 Aug 2004

5340-14-511-0344
Mounting Bracket

145110344
355A77-2043-00: RNCC: 3 | RNVC: 2

25 Nov 1998

5340-14-405-6017
Tubular Fairlead

144056017
424-90476-000: RNCC: 3 | RNVC: 2

4 Dec 1985

5340-14-504-7647
Mounting Bracket

145047647
9513-009: RNCC: 3 | RNVC: 9

3 Mar 1998

5340-14-428-6123
Rod End Clevis

144286123
19055-001-00: RNCC: 3 | RNVC: 2
19055-001-00: RNCC: 5 | RNVC: 9

8 Dec 1988

5340-14-446-1278
Eye Hook

144461278
540825: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-303-1281
Rod End Clevis

143031281
M3C225-19-05: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-225-2378
Access Cover

142252378
NO PRIMARY REF14-225-2378: RNCC: 3 | RNVC: 2
2012N: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-456-9189
Strap Fastener Loop

144569189
1207141P002: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-14-396-2729
Angle Bracket

143962729
3511 998 29911: RNCC: 3 | RNVC: 2
2878-3: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-526-3822
Eye Hook

145263822
B507J: RNCC: 3 | RNVC: 2

25 Jul 2001

5340-14-315-6240
Strap Fastener Loop

143156240
210715: RNCC: 3 | RNVC: 2
210715: RNCC: 5 | RNVC: 9
1419: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-387-8944
Loop Clamp

143878944
3-2602-40A: RNCC: 3 | RNVC: 2
3-2602-40A: RNCC: 5 | RNVC: 9

12 Oct 1983

5340-14-448-6764
Loop Clamp

144486764
200879-0: RNCC: 3 | RNVC: 2

4 Jul 1991

5340-14-356-1070
Loop Clamp Kit

143561070
620-861-982-0: RNCC: 3 | RNVC: 2

5 Apr 1979

5340-14-384-2954
Runner

143842954
CR0Q1BECNC0QUEREPB: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-386-5513
Cover Strip

143865513
DA2C291453101A1: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-509-2353
Mounting Bracket

145092353
MECZ6162: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-481-6340
Loop Clamp

144816340
2032NA: RNCC: 3 | RNVC: 2
0196489N00: RNCC: 5 | RNVC: 2

23 May 1996

5340-14-483-3729
Arched Cushion

144833729
21768398: RNCC: 3 | RNVC: 2
21768398: RNCC: 3 | RNVC: 2

5 Sep 1996

5340-14-397-3956
Angle Bracket

143973956
195596: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-14-304-2230
Mending Plate

143042230
173787: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-379-3147
Mending Plate

143793147
15005: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-239-2392
Mounting Plate

142392392
358490: RNCC: 3 | RNVC: 2
358490: RNCC: 6 | RNVC: 9

1 Jan 1967

5340-14-543-3532
Bridge Clamp

145433532
071544000000040: RNCC: 3 | RNVC: 2

22 Oct 2004

5340-14-270-8628
Retaining Strap

142708628
H90N2002: RNCC: 3 | RNVC: 2
530895: RNCC: 5 | RNVC: 2

4 May 1983

5340-14-502-8693
Butt Hinge

145028693
9R9742: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-224-4126
Loop Clamp

142244126
0000126713: RNCC: 3 | RNVC: 2
0000126713: RNCC: 5 | RNVC: 9
126713: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-516-4333
Mounting Plate

145164333
55829: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-14-270-8629
Retaining Strap

142708629
H90N2003: RNCC: 3 | RNVC: 2
530888: RNCC: 5 | RNVC: 2

4 May 1983

5340-14-452-7941
Loop Clamp

144527941
51213110012: RNCC: 3 | RNVC: 2
300G12: RNCC: 5 | RNVC: 2
14400211D: RNCC: 5 | RNVC: 2
F300 0T 024 4163: RNCC: 6 | RNVC: 9

21 Jan 1992

5340-14-349-2384
Vent Plug

143492384
212955: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-372-6145
Bridge Clamp

143726145
0000241981: RNCC: 3 | RNVC: 2
0000241981: RNCC: 5 | RNVC: 9

21 Sep 1981

5340-14-393-1253
Retaining Strap

143931253
02140012600: RNCC: 3 | RNVC: 2
021400126: RNCC: 5 | RNVC: 2

12 Apr 1984

5340-14-369-2746
Mounting Plate

143692746
S2867: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-445-7801
Mounting Bracket

144457801
BLC239112: RNCC: 3 | RNVC: 2

25 Feb 1991

5340-14-555-7169
Loop Clamp

145557169
12317009015: RNCC: 3 | RNVC: 2

10 Dec 2007

5340-14-477-7390
Runner

144777390
1070412M00: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-14-555-4092
Mounting Bracket

145554092
82051041000: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-14-555-5683
Utility Resilient Mount

145555683
E3RP0953A55: RNCC: 3 | RNVC: 2

27 Nov 2007

5340-14-466-6196
Angle Bracket

144666196
4178063: RNCC: 3 | RNVC: 2

17 Nov 1993

5340-14-523-4935
Cover Strip

145234935
01-250-454: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-14-461-6321
Mounting Bracket

144616321
2DM160611: RNCC: 3 | RNVC: 2
91714216: RNCC: 5 | RNVC: 2

17 Mar 1993

5340-14-466-0546
Mounting Bracket

144660546
284538: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-14-499-4628
Mounting Bracket

144994628
3802671W00: RNCC: 3 | RNVC: 2
3802671W00: RNCC: 3 | RNVC: 2
3802671W00: RNCC: 5 | RNVC: 9
F300 0T 022 4606: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-454-8573
Mounting Bracket

144548573
48726: RNCC: 3 | RNVC: 9
48726: RNCC: 5 | RNVC: 9

24 Apr 1992

5340-14-504-2409
Loop Clamp

145042409
3595183M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-534-7113
Retaining Strap

145347113
10535874: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-476-7100
Mounting Bracket

144767100
101162101111: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-14-283-4950
Plug Button

142834950
403382: RNCC: 3 | RNVC: 2
403382: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-453-7063
Access Cover

144537063
3511 191 90881: RNCC: 3 | RNVC: 2
3511 191 90881: RNCC: 5 | RNVC: 2

5 Mar 1992

5340-14-486-5122
Retaining Strap

144865122
10106839: RNCC: 3 | RNVC: 2

21 Mar 1997

5340-14-503-1491
Angle Bracket

145031491
PM1A576194001A2: RNCC: 3 | RNVC: 2
PM1A576194001A2: RNCC: 5 | RNVC: 2

7 Jan 1998

5340-14-418-1209
Rod End Clevis

144181209
059122H01TRA: RNCC: 3 | RNVC: 2
059122H: RNCC: 5 | RNVC: 2

6 Aug 1987

5340-14-324-7235
Access Cover

143247235
300300099: RNCC: 3 | RNVC: 2
300300099: RNCC: 3 | RNVC: 9
21662: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-226-5636
Access Cover

142265636
200680: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-479-8016
Mounting Plate

144798016
11095T720106: RNCC: 3 | RNVC: 2

7 Feb 1996

5340-14-487-5594
Turnbuckle Body

144875594
43905DG0983D: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-317-2187
Access Cover

143172187
0076350060: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-425-0231
Access Cover

144250231
39230289: RNCC: 3 | RNVC: 2
39230289: RNCC: 5 | RNVC: 9

16 Jun 1988

5340-14-429-4827
Access Cover

144294827
571910: RNCC: 3 | RNVC: 2

25 Jan 1989

5340-14-472-6670
Mounting Plate

144726670
DRV66338: RNCC: 3 | RNVC: 2

9 Nov 1994

5340-14-382-7117
Rod End Clevis

143827117
105112401101: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-298-0619
Rod End Clevis

142980619
035A202: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-478-4666
Access Cover

144784666
39256332: RNCC: 3 | RNVC: 2
39256332: RNCC: 5 | RNVC: 9

8 Nov 1995

5340-14-418-8995
Rod End Clevis

144188995
DA1D772226121: RNCC: 3 | RNVC: 2

16 Sep 1987

5340-14-459-3785
Section Block Clamp

144593785
16787430: RNCC: 3 | RNVC: 2
16787430: RNCC: 5 | RNVC: 9

26 Nov 1992

5340-14-485-6433
Mounting Bracket

144856433
46020184: RNCC: 3 | RNVC: 2
46020184: RNCC: 5 | RNVC: 2

6 Feb 1997

5340-14-348-6736
Access Cover

143486736
002674210M: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-14-290-1246
Access Cover

142901246
P860: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-370-7494
Access Cover

143707494
398102170001: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-349-5631
Access Cover

143495631
0057900410: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-449-4977
Retaining Strap

144494977
023907K: RNCC: 3 | RNVC: 2

21 Aug 1991

5340-14-361-2098
Rod End Clevis

143612098
BAZ97684: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-402-0476
Plug Button

144020476
232472: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-549-9732
Access Cover

145499732
F1262321: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-418-8730
Rod End Clevis

144188730
DA1D292343583: RNCC: 3 | RNVC: 2

16 Sep 1987

5340-14-549-9468
Angle Bracket

145499468
2092135: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-210-6500
Rod End Clevis

142106500
0000243402: RNCC: 3 | RNVC: 2
0000243402: RNCC: 5 | RNVC: 9
243402: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-492-2959
Mounting Plate

144922959
0035632651: RNCC: 3 | RNVC: 2
F300 0T 007 3313: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-258-8388
Access Cover

142588388
26169: RNCC: 3 | RNVC: 9

1 Jan 1969

5340-14-549-8917
Access Cover

145498917
31105479: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-530-4844
Access Cover

145304844
TM1063G001: RNCC: 3 | RNVC: 2

17 Jun 2002

5340-14-413-9373
Access Cover

144139373
BJM00701P: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-496-7473
Access Cover

144967473
F00162181: RNCC: 3 | RNVC: 2
F00162181: RNCC: 5 | RNVC: 9
F300 0T 022 0037: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-484-0407
Rod End Clevis

144840407
R12608B8AELZ: RNCC: 2 | RNVC: 2
R12608B8AELZ: RNCC: 3 | RNVC: 9
99206748: RNCC: 5 | RNVC: 2

17 Oct 1996

5340-14-512-7472
Plug Button

145127472
800033803: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-512-5077
Kick Door Plate

145125077
JAQUE00383A00: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-554-5804
Access Cover

145545804
SP01003582A: RNCC: 3 | RNVC: 2

23 Jul 2007

5340-14-527-8358
Access Cover

145278358
603K109: RNCC: 3 | RNVC: 2
603K109: RNCC: 5 | RNVC: 2

23 Nov 2001

5340-14-548-3644
Utility Access Door

145483644
09034: RNCC: 3 | RNVC: 2
AA014799: RNCC: 6 | RNVC: 9

10 Jan 2006

5340-14-423-9865
Mounting Plate

144239865
639161004: RNCC: 3 | RNVC: 2
89174126: RNCC: 5 | RNVC: 2
639161004: RNCC: 5 | RNVC: 9

5 May 1988

5340-14-434-2979
Access Cover

144342979
557859: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-429-1233
Access Cover

144291233
050942W01TM79: RNCC: 3 | RNVC: 2
050942W: RNCC: 5 | RNVC: 2

11 Jan 1989

5340-14-369-9059
Access Cover

143699059
22374620: RNCC: 3 | RNVC: 2
22374620: RNCC: 5 | RNVC: 2

18 May 1981

5340-14-437-8219
Anchor Strap

144378219
ZF05932998: RNCC: 3 | RNVC: 2
5932998: RNCC: 5 | RNVC: 2
F300 0T 003 3363: RNCC: 6 | RNVC: 9

21 Feb 1990

5340-14-218-5723
Access Cover

142185723
0603958200: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-254-9034
Access Cover

142549034
202461: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-351-3691
Retaining Strap

143513691
501-803-746-0: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-320-1008
Loop Clamp

143201008
12-19-17-3: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-504-0798
Access Cover

145040798
CS1-0.004.248: RNCC: 3 | RNVC: 2

5 Feb 1998

5340-14-533-4044
Mounting Bracket

145334044
P22-010757: RNCC: 3 | RNVC: 2
A22-010757: RNCC: 5 | RNVC: 2

4 Feb 2003

5340-14-485-7989
Detent Plunger

144857989
428157: RNCC: 3 | RNVC: 2
428157-002: RNCC: 5 | RNVC: 9

12 Feb 1997

5340-14-230-2026
Mending Plate

142302026
NO PRIMARY REF14-230-2026: RNCC: 3 | RNVC: 2
000272005P: RNCC: 5 | RNVC: 2
61407: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-373-6025
Angle Bracket

143736025
TH20G1382-2: RNCC: 3 | RNVC: 2

13 Nov 1981

5340-14-411-6584
Loop Clamp

144116584
200W572-3: RNCC: 3 | RNVC: 9

27 Aug 1986

5340-14-542-2999
Mounting Bracket

145422999
970798508: RNCC: 3 | RNVC: 2
970798508: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-444-7052
Bumper

144447052
39538921: RNCC: 3 | RNVC: 2
6126: RNCC: 5 | RNVC: 9
39538921: RNCC: 5 | RNVC: 9

16 Jan 1991

5340-14-481-3797
Angle Bracket

144813797
258820: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-497-1879
Loop Clamp

144971879
95001344: RNCC: 3 | RNVC: 2
F300 0T 022 7994: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-040-9085
Angle Bracket

140409085
16008255: RNCC: 3 | RNVC: 2
16008255: RNCC: 5 | RNVC: 2
16008255: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-477-3594
Bow Handle

144773594
19-7-3343: RNCC: 3 | RNVC: 2

22 Aug 1995

5340-14-421-6365
Retaining Strap

144216365
228104: RNCC: 3 | RNVC: 2

20 Jan 1988

5340-14-353-6744
Quick Release Pin

143536744
620C10T50: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-475-3281
Mounting Bracket

144753281
574821: RNCC: 3 | RNVC: 2

29 Mar 1995

5340-14-418-3181
Angle Bracket

144183181
4-454001: RNCC: 3 | RNVC: 9
4-454001: RNCC: 5 | RNVC: 2
4-454001: RNCC: 5 | RNVC: 9

12 Aug 1987

5340-14-478-3279
Pawl Fastener

144783279
4500-6-DKLI: RNCC: 3 | RNVC: 2
1049654Y00: RNCC: 5 | RNVC: 2

25 Oct 1995

5340-14-448-2446
Angle Bracket

144482446
27110435-3: RNCC: 3 | RNVC: 2

18 Jun 1991

5340-14-442-1752
Angle Bracket

144421752
20296335: RNCC: 3 | RNVC: 2

3 Oct 1990

5340-14-383-4482
Pipe Hanger

143834482
20189936: RNCC: 3 | RNVC: 2
20189936: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-403-4535
Anchor Strap

144034535
P4H019587-00: RNCC: 3 | RNVC: 2
P4H019587-00: RNCC: 5 | RNVC: 9

21 Aug 1985

5340-14-532-5047
Utility Access Door

145325047
42-425-035D: RNCC: 3 | RNVC: 2
SZ42.425.035D: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-14-351-6334
Access Cover

143516334
NO PRIMARY REF14-351-6334: RNCC: 3 | RNVC: 2
4745: RNCC: 5 | RNVC: 9

12 Sep 1978

5340-14-457-6763
Pipe Hanger

144576763
402226A-SG10137-Z2CND17-12: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-505-0836
Mounting Plate

145050836
LSA32-1L10A1-2REP265: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-351-2429
Angle Bracket

143512429
16ATH20-0006: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-414-8277
Locking Stay

144148277
ER820000-10-100-129: RNCC: 3 | RNVC: 2

12 Mar 1987

5340-14-320-1886
Plug Button

143201886
86418: RNCC: 3 | RNVC: 9
MN79-86418C: RNCC: 3 | RNVC: 9

1 Jan 1975

5340-14-300-9499
Handwheel

143009499
341A91-0055-11: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-457-5445
Angle Bracket

144575445
7522-60314: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-428-3005
Loop Clamp

144283005
6504030110: RNCC: 3 | RNVC: 2
9560119920: RNCC: 5 | RNVC: 2
71012-25: RNCC: 5 | RNVC: 9

8 Dec 1988

5340-14-370-3309
Clamping Catch

143703309
WA30-21-270: RNCC: 3 | RNVC: 2
WA30-21-270: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-362-0944
Compression Cup

143620944
GSM171-167F7: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-287-7021
Retaining Strap

142877021
6111-1638: RNCC: 3 | RNVC: 2
14-582-00-20: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-505-1250
Clamping Catch

145051250
6003-U80-JA: RNCC: 3 | RNVC: 2
818026: RNCC: 5 | RNVC: 2

11 Mar 1998

5340-14-347-3857
Angle Bracket

143473857
M267-10725: RNCC: 3 | RNVC: 2

1 Mar 1978

5340-14-322-9457
Access Cover

143229457
M230-25: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-485-0658
Mounting Bracket

144850658
332A32-3274-20: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-14-287-9190
Bumper

142879190
341A31-4208-20: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-469-5239
Bumper

144695239
906134: RNCC: 3 | RNVC: 2
A4-906134: RNCC: 5 | RNVC: 2
MAT512-0334: RNCC: 5 | RNVC: 2
906134: RNCC: 5 | RNVC: 2
A4-906134: RNCC: 5 | RNVC: 2
906134: RNCC: 5 | RNVC: 9
A4-906134: RNCC: 5 | RNVC: 9

27 Apr 1994

5340-14-032-0742
Butt Hinge

140320742
341A58-1052-00: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-439-3061
Pipe Hanger

144393061
C58000-302: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-511-6340
Pipe Hanger

145116340
78733-050-029B: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-385-3178
Doorstop

143853178
365A25-3175-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-419-5433
Butt Hinge

144195433
M208-61040: RNCC: 3 | RNVC: 2

21 Oct 1987

5340-14-482-9377
Pipe Hanger

144829377
78733-025-026B: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-403-3992
Webbing Strap

144033992
DAEB212: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-520-1648
Mounting Bracket

145201648
39143820: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-553-6894
Mounting Bracket

145536894
29001226: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-536-8574
Mounting Bracket

145368574
29218: RNCC: 3 | RNVC: 2

17 Sep 2003

5340-14-447-3794
Mounting Plate

144473794
16283125: RNCC: 3 | RNVC: 2

15 May 1991

5340-14-042-1618
Retaining Strap

140421618
16347123: RNCC: 3 | RNVC: 2
16347123: RNCC: 5 | RNVC: 2
16347123: RNCC: 5 | RNVC: 9

14 Feb 1977

5340-14-530-5291
Mounting Bracket

145305291
W004891472: RNCC: 3 | RNVC: 2

18 Jun 2002

5340-14-402-3134
Snap Hook

144023134
GA115A6000KG: RNCC: 3 | RNVC: 2

3 Jul 1985

5340-14-515-2205
Loop Clamp

145152205
0009553028: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-526-9702
Mounting Bracket

145269702
10531931: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-512-8900
Mounting Bracket

145128900
550625: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-359-2984
Angle Bracket

143592984
16689345: RNCC: 3 | RNVC: 2

2 Oct 1979

5340-14-442-6558
Mounting Plate

144426558
20117871: RNCC: 3 | RNVC: 2

24 Oct 1990

5340-14-547-6007
Mounting Bracket

145476007
483278: RNCC: 3 | RNVC: 2

18 Oct 2005

5340-14-455-9607
Plate Spacer

144559607
PM1A796011208: RNCC: 3 | RNVC: 2
PM1A796011208: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-312-0065
Bow Handle

143120065
TH20B3204: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-559-4364
Utility Access Door

145594364
P1362055: RNCC: 3 | RNVC: 2
P0500166: RNCC: 5 | RNVC: 1

13 Jan 2009

5340-14-313-7479
Angle Bracket

143137479
0064770860: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-441-7327
Runner

144417327
234501301400: RNCC: 3 | RNVC: 2
2345102: RNCC: 5 | RNVC: 2

17 Sep 1990

5340-14-355-1155
Mending Plate

143551155
525591: RNCC: 3 | RNVC: 2
00525591: RNCC: 5 | RNVC: 2

19 Mar 1979

5340-14-263-4182
Handwheel

142634182
R404295: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-466-1744
Mounting Bracket

144661744
168233: RNCC: 3 | RNVC: 2
89170291: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-502-2050
Expansion Plug

145022050
R93910B320AGTL: RNCC: 2 | RNVC: 2
VQAG320TL: RNCC: 5 | RNVC: 2

26 Nov 1997

5340-14-518-4051
Mounting Bracket

145184051
2104169: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-14-472-0770
Support Hook

144720770
24SC67: RNCC: 3 | RNVC: 2
187510: RNCC: 5 | RNVC: 2
008751: RNCC: 5 | RNVC: 9

5 Oct 1994

5340-14-469-6456
Angle Bracket

144696456
PM1A725290331: RNCC: 3 | RNVC: 2
PM1A725290331: RNCC: 5 | RNVC: 2

4 May 1994

5340-14-518-1562
Mounting Bracket

145181562
5010054304: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-532-1435
Support Hook

145321435
5010579428: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-14-351-0170
Hinge Torsion Bar

143510170
192690: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-518-3044
Mounting Bracket

145183044
0417 1104: RNCC: 3 | RNVC: 9

2 Feb 2000

5340-14-494-6274
Mounting Bracket

144946274
4772303470: RNCC: 3 | RNVC: 2
5000995301: RNCC: 5 | RNVC: 2
F300 0T 017 6530: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-335-3341
Support Hook

143353341
192377: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-285-5452
Angle Bracket

142855452
158701: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-532-1352
Mounting Plate

145321352
5010559912: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-14-264-3100
Mending Plate

142643100
3004-58: RNCC: 3 | RNVC: 2
3004-58: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-348-7022
Angle Bracket

143487022
622215REP2: RNCC: 3 | RNVC: 2
622215REP2: RNCC: 5 | RNVC: 9

19 Apr 1978

5340-14-322-9447
Webbing Strap

143229447
82918: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-417-4086
Clamping Catch

144174086
969365P03: RNCC: 3 | RNVC: 2
969365P03: RNCC: 5 | RNVC: 9

8 Jul 1987

5340-14-501-6668
Bridge Clamp

145016668
45283365: RNCC: 3 | RNVC: 2
45283365: RNCC: 3 | RNVC: 9

5 Nov 1997

5340-14-451-9685
Mounting Bracket

144519685
MT12683212FS595A: RNCC: 3 | RNVC: 2
1051599G00: RNCC: 5 | RNVC: 2

16 Dec 1991

5340-14-543-3814
Clamping Catch

145433814
100000: RNCC: 3 | RNVC: 2

26 Oct 2004

5340-14-546-3297
Mounting Bracket

145463297
5010604052: RNCC: 3 | RNVC: 2

25 Jun 2005

5340-14-428-2701
Clamping Catch

144282701
15A1269: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-512-8488
Mounting Bracket

145128488
222036: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-462-0308
Mounting Bracket

144620308
A82556: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-550-4846
Mounting Bracket

145504846
RA1A704736511: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-464-3129
Plate Spacer

144643129
5000504562: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-541-4605
Metal Grille

145414605
MB5337F00: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-513-0396
Loop Clamp

145130396
68935008: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-14-464-8452
Runner

144648452
590925: RNCC: 3 | RNVC: 2

1 Sep 1993

5340-14-505-7798
Loop Clamp

145057798
MX2107A00: RNCC: 3 | RNVC: 2
04110015065: RNCC: 5 | RNVC: 9

26 Mar 1998

5340-14-406-1626
Bumper

144061626
0608325300: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-438-4061
Mounting Bracket

144384061
5000892567: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-448-4071
Mounting Bracket

144484071
90DD240001-F09: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-14-320-7496
Loop Clamp

143207496
C4909A: RNCC: 3 | RNVC: 2
9560113340: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-426-6601
Webbing Strap

144266601
1024R0: RNCC: 3 | RNVC: 9

15 Sep 1988

5340-14-446-4669
Mounting Plate

144464669
5443999: RNCC: 3 | RNVC: 2

20 Mar 1991

5340-14-439-1988
Mounting Bracket

144391988
16045227: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-533-7517
Mounting Bracket

145337517
F1260741: RNCC: 3 | RNVC: 2

21 Feb 2003

5340-14-525-8477
Mounting Plate

145258477
10640518: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-454-0835
Angle Bracket

144540835
16343764: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-14-430-5072
Butt Hinge

144305072
PM1A125810022U1: RNCC: 3 | RNVC: 2
PM1A125810022U1: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-367-3375
Bumper

143673375
4508398A: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-545-6383
Mounting Bracket

145456383
5010559526: RNCC: 3 | RNVC: 2

26 Apr 2005

5340-14-367-4669
Angle Bracket

143674669
A11A602215116: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-391-5282
Angle Bracket

143915282
064T10-603690D: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-436-5605
Mounting Bracket

144365605
DA2C293631705: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-545-2801
Loop Clamp

145452801
COLLI00133: RNCC: 3 | RNVC: 2
AUK3214/031S: RNCC: 5 | RNVC: 2

31 Mar 2005

5340-14-377-1334
Anchor Strap

143771334
10-263-007: RNCC: 3 | RNVC: 2
10263007: RNCC: 5 | RNVC: 2
10-267-001: RNCC: 5 | RNVC: 2

17 May 1982

5340-14-531-7238
Mounting Bracket

145317238
A-JB0745-1: RNCC: 3 | RNVC: 9
AJB0745-1: RNCC: 5 | RNVC: 9
A-J0745-001: RNCC: 5 | RNVC: 9
M023646: RNCC: 5 | RNVC: 9

11 Sep 2002

5340-14-349-9192
Rod End Clevis

143499192
6511-05382: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-210-3582
Loop Clamp

142103582
86072: RNCC: 3 | RNVC: 2
8607200: RNCC: 5 | RNVC: 9
86072: RNCC: 5 | RNVC: 9
86072-00: RNCC: 5 | RNVC: 9
86072: RNCC: 5 | RNVC: 9
86072-00: RNCC: 5 | RNVC: 9
217254: RNCC: 5 | RNVC: 9
86072: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-353-6787
Loop Clamp

143536787
501-804-535-0: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-527-0499
Loop Clamp

145270499
620-858-568-0: RNCC: 3 | RNVC: 2

26 Sep 2001

5340-14-376-0103
Rim Latch Set

143760103
JVCT02-21: RNCC: 3 | RNVC: 2

30 Mar 1982

5340-14-555-1399
Blank Panel

145551399
FB384 010 07 P DXL-079: RNCC: 3 | RNVC: 2

4 Oct 2007

5340-14-321-1888
Access Cover

143211888
30-03-17: RNCC: 3 | RNVC: 2
30-03-17: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-381-9501
Access Cover

143819501
NO PRIMARY REF14-381-9501: RNCC: 3 | RNVC: 2
156994DV: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-437-8329
Access Hole Frame

144378329
2-2761-18-00-01: RNCC: 3 | RNVC: 9

21 Feb 1990

5340-14-465-0750
Mounting Plate

144650750
389539: RNCC: 3 | RNVC: 2
389539-001: RNCC: 5 | RNVC: 9

8 Sep 1993

5340-14-250-3301
Access Cover

142503301
150352: RNCC: 3 | RNVC: 2
61.15.006.A: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-519-0998
Self-Locking Insert

145190998
15890467-8: RNCC: 3 | RNVC: 2

7 Mar 2000

5340-14-454-4787
Angle Bracket

144544787
70902J133195: RNCC: 3 | RNVC: 2
133195: RNCC: 5 | RNVC: 2
5044927: RNCC: 5 | RNVC: 9

2 Apr 1992

5340-14-457-0339
Stand Base

144570339
518949: RNCC: 3 | RNVC: 2
SOG518949: RNCC: 5 | RNVC: 9
85-694-8480: RNCC: 6 | RNVC: 9

30 Jul 1992

5340-14-526-7049
Synchro Clamp

145267049
QUI-NCA-0089: RNCC: 3 | RNVC: 2

27 Aug 2001

5340-14-437-4523
Mounting Bracket

144374523
332A61-2339-04: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-554-7461
Handwheel

145547461
MM4401: RNCC: 3 | RNVC: 2
AV6000-14: RNCC: 5 | RNVC: 2

8 Aug 2007

5340-14-534-7935
Access Cover

145347935
1001-09: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-14-442-5046
Loop Clamp

144425046
RSGU1-12/12-W1: RNCC: 3 | RNVC: 2

17 Oct 1990

5340-14-473-1938
Mounting Bracket

144731938
F7987 4032-91: RNCC: 3 | RNVC: 9

7 Dec 1994

5340-14-389-8801
Plug Button

143898801
042774-750-925: RNCC: 3 | RNVC: 9
5340-AA-2033629: RNCC: 6 | RNVC: 9

26 Jan 1984

5340-14-436-9983
Exit Bolt

144369983
095-00568REP1: RNCC: 3 | RNVC: 9
91605653: RNCC: 5 | RNVC: 2

10 Jan 1990

5340-14-296-0317
Mending Plate

142960317
10-735008: RNCC: 3 | RNVC: 2
43276: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-330-9699
Bumper

143309699
M208-29020: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-578-1466
Utility Resilient Mount

145781466
521656: RNCC: 3 | RNVC: 2
415-0727: RNCC: 5 | RNVC: 2

5 Nov 2013

5340-14-471-6030
Roller Holder

144716030
312-05791-017: RNCC: 3 | RNVC: 2

7 Sep 1994

5340-14-461-5956
Mounting Plate

144615956
BC138A010-103: RNCC: 3 | RNVC: 9
1011575T00: RNCC: 5 | RNVC: 2

17 Mar 1993

5340-14-426-5575
Rigid Caster

144265575
TF3BA063-23L: RNCC: 3 | RNVC: 2
91490584: RNCC: 5 | RNVC: 2

8 Sep 1988

5340-14-230-6225
Loop Clamp

142306225
NO PRIMARY REF14-230-6225: RNCC: 3 | RNVC: 2
0111F295: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-473-8444
Mounting Bracket

144738444
332A72-2242-20: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-463-2077
Mounting Bracket

144632077
2156-01-055: RNCC: 3 | RNVC: 2
89296216: RNCC: 5 | RNVC: 2

26 May 1993

5340-14-340-3432
Access Cover

143403432
M3C707-32-03: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-488-9199
Protection Bellows

144889199
73244: RNCC: 3 | RNVC: 2
AA710SC24: RNCC: 5 | RNVC: 2
F300 0T 003 6600: RNCC: 6 | RNVC: 9

11 Jun 1997

5340-14-400-0569
Handwheel

144000569
373137: RNCC: 3 | RNVC: 2
373137: RNCC: 5 | RNVC: 9

24 Apr 1985

5340-14-496-3415
Mounting Plate

144963415
165363: RNCC: 3 | RNVC: 2
F300 0T 021 4150: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-031-3881
Bow Handle

140313881
A11A261100039U2: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-527-1181
Access Cover

145271181
10642078: RNCC: 3 | RNVC: 2

3 Oct 2001

5340-14-279-2228
Access Cover

142792228
30171: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-338-7047
Retaining Strap

143387047
46300AB: RNCC: 3 | RNVC: 9
2050: RNCC: 5 | RNVC: 9
2114: RNCC: 5 | RNVC: 9

17 Dec 1976

5340-14-351-5658
Rod End Clevis

143515658
525660: RNCC: 3 | RNVC: 2

12 Sep 1978

5340-14-448-0699
Butt Hinge

144480699
PM1A711024334: RNCC: 3 | RNVC: 2
PM1A711024334: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-426-4665
Cover Strip

144264665
CJ98X258X80X1,5AG3: RNCC: 3 | RNVC: 2

1 Sep 1988

5340-14-395-1528
Mending Plate

143951528
4906700002: RNCC: 3 | RNVC: 2
4906700002: RNCC: 5 | RNVC: 2

2 Oct 1984

5340-14-512-3231
Loop Holder

145123231
46323898: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-14-446-1280
Mounting Bracket

144461280
549239: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-526-8837
Mounting Bracket

145268837
35674538: RNCC: 3 | RNVC: 2

12 Sep 2001

5340-14-364-5082
Control Rod

143645082
CCPM15: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-14-526-9865
Mounting Plate

145269865
T257A0002203: RNCC: 3 | RNVC: 2

20 Sep 2001

5340-14-346-9481
Retaining Strap

143469481
C57590: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-14-384-3078
Angle Bracket

143843078
1030882009: RNCC: 3 | RNVC: 2
1030882009: RNCC: 5 | RNVC: 2

4 May 1983

5340-14-375-8370
Mounting Plate

143758370
16234056: RNCC: 3 | RNVC: 2
16234056: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-461-7754
Plate Spacer

144617754
235044H: RNCC: 3 | RNVC: 2

24 Mar 1993

5340-14-439-2927
Cover Strip

144392927
DA2C264931080: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-424-3227
Webbing Strap

144243227
11311JAUNEL0NG1M: RNCC: 3 | RNVC: 2
91587872: RNCC: 5 | RNVC: 2

19 May 1988

5340-14-504-9690
Bow Handle

145049690
11010003: RNCC: 3 | RNVC: 2
4P012012ZB: RNCC: 5 | RNVC: 2

11 Mar 1998

5340-14-554-9416
Loop Clamp

145549416
78651DH68AF: RNCC: 1 | RNVC: 2
78651DH68AF: RNCC: 3 | RNVC: 2
78651DH68F: RNCC: 5 | RNVC: 9
78651DH68F: RNCC: 5 | RNVC: 9

11 Sep 2007

5340-14-369-9117
Retaining Strap

143699117
114083005: RNCC: 3 | RNVC: 2
114083005: RNCC: 5 | RNVC: 2

18 May 1981

5340-14-481-8942
Mounting Bracket

144818942
HSS831AHB313: RNCC: 3 | RNVC: 2
89167033: RNCC: 5 | RNVC: 2

6 Jun 1996

5340-14-526-9653
Mounting Bracket

145269653
10384759: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-272-9231
Loop Clamp

142729231
70889122: RNCC: 3 | RNVC: 2
70889122: RNCC: 5 | RNVC: 9
889122: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-460-3546
Mounting Plate

144603546
20787590: RNCC: 3 | RNVC: 9

21 Jan 1993

5340-14-277-7621
Mending Plate

142777621
D450688F: RNCC: 3 | RNVC: 9

1 Jan 1971

5340-14-348-3526
Loop Clamp

143483526
12331060: RNCC: 3 | RNVC: 2
PF12A3N6: RNCC: 5 | RNVC: 2
PF12A3N6: RNCC: 5 | RNVC: 9
PF12A3N6: RNCC: 5 | RNVC: 9

29 Mar 1978

5340-14-551-4953
Angle Bracket

145514953
RA1B703126108: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-485-1415
Angle Bracket

144851415
3BM00709AAAA: RNCC: 3 | RNVC: 2
3BM00709AAAA: RNCC: 5 | RNVC: 9

10 Jan 1997

5340-14-381-7751
Retaining Band

143817751
16960035: RNCC: 3 | RNVC: 2
16960035: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-405-6138
Loop Clamp

144056138
51425305004: RNCC: 3 | RNVC: 2
28SE4: RNCC: 5 | RNVC: 2

4 Dec 1985

5340-14-523-4416
Runner

145234416
8628DA240NI021: RNCC: 3 | RNVC: 2

22 Jan 2001

5340-14-447-8291
Support Hook

144478291
96147467: RNCC: 3 | RNVC: 2

6 Jun 1991

5340-14-532-3504
Mounting Bracket

145323504
1330ETJ2010101: RNCC: 3 | RNVC: 2
1330ETJ2010101: RNCC: 3 | RNVC: 9
1330 ETJ 201 01 01: RNCC: 5 | RNVC: 9

30 Oct 2002

5340-14-401-3515
Angle Bracket

144013515
20327793: RNCC: 3 | RNVC: 2
20327793: RNCC: 5 | RNVC: 9

5 Jun 1985

5340-14-413-9805
Access Cover

144139805
408270: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-457-1855
Retaining Strap

144571855
39467516: RNCC: 3 | RNVC: 2
39467516: RNCC: 5 | RNVC: 9

13 Aug 1992

5340-14-514-9970
Mounting Plate

145149970
SA/CS33/10: RNCC: 3 | RNVC: 2

25 Jun 1999

5340-14-488-4065
Anchor Strap

144884065
D3723151: RNCC: 3 | RNVC: 2
D37231-51: RNCC: 5 | RNVC: 2
P37231-51D: RNCC: 5 | RNVC: 2

7 May 1997

5340-14-476-0790
Lock-Release Lever

144760790
TLE1020-06L: RNCC: 3 | RNVC: 2
Y00002730: RNCC: 5 | RNVC: 2
Y00003562: RNCC: 5 | RNVC: 2
T1020-06L: RNCC: 5 | RNVC: 2
TL1020-06L: RNCC: 5 | RNVC: 2
JOSTLE1020-06L: RNCC: 5 | RNVC: 9

17 May 1995

5340-14-370-7345
Anchor Strap

143707345
676-14497-00: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-301-4473
Butt Hinge

143014473
P26-306-80X40GR0ULEEAC: RNCC: 2 | RNVC: 2

1 Jan 1973

5340-14-391-9116
Retaining Strap

143919116
5101-02-00-18: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-388-1725
Loop Clamp

143881725
RSGU1-16-20: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-14-332-4524
Rim Lock Set

143324524
NO PRIMARY REF14-332-4524: RNCC: 3 | RNVC: 2
1700-03-1729B1MN009: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-360-7014
Anchor Strap

143607014
650-82363-01: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-442-2677
Handwheel

144422677
1194-05-08: RNCC: 3 | RNVC: 2

8 Oct 1990

5340-14-335-3442
Control Rod

143353442
190995: RNCC: 3 | RNVC: 2
20-0498: RNCC: 5 | RNVC: 2

30 Jun 1976

5340-14-433-7162
Quick Release Pin

144337162
13270S8R50: RNCC: 3 | RNVC: 2
51453S8R50N: RNCC: 5 | RNVC: 2
85-693-0625: RNCC: 6 | RNVC: 9

2 Aug 1989

5340-14-499-5195
Strap Hinge

144995195
CC409-22239ZV: RNCC: 3 | RNVC: 2
CC409-22239-ZV: RNCC: 3 | RNVC: 2
F300 0T 023 1020: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-501-8180
Angle Bracket

145018180
307-844-602-0: RNCC: 3 | RNVC: 2

12 Nov 1997

5340-14-485-6744
Plug Button

144856744
A10MA74-109-60-0: RNCC: 3 | RNVC: 2
A10MA74-109-60-0: RNCC: 5 | RNVC: 2

6 Feb 1997

5340-14-386-4567
Loop Clamp

143864567
PE27017-7: RNCC: 3 | RNVC: 2
85-800-9872: RNCC: 6 | RNVC: 9

24 Aug 1983

5340-14-349-6046
Access Cover

143496046
674806: RNCC: 3 | RNVC: 2
674806REP1038: RNCC: 5 | RNVC: 2
953038: RNCC: 5 | RNVC: 2

22 May 1978

5340-14-508-8077
Angle Bracket

145088077
JVJT142106: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-14-409-4382
Anchor Strap

144094382
Y20172: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-553-8477
Utility Access Door

145538477
E18554: RNCC: 3 | RNVC: 2

23 May 2007

5340-14-437-0157
Access Cover

144370157
123403-BRONZE: RNCC: 3 | RNVC: 2

10 Jan 1990

5340-14-377-2193
Access Cover

143772193
TID13513: RNCC: 3 | RNVC: 2
TID13513: RNCC: 6 | RNVC: 9

17 May 1982

5340-14-501-6833
Rod End Clevis

145016833
45281482: RNCC: 3 | RNVC: 2
45281482: RNCC: 3 | RNVC: 9

5 Nov 1997

5340-14-528-8643
Access Cover

145288643
GC056514Y00: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-14-396-3136
Access Cover

143963136
144931002: RNCC: 3 | RNVC: 2
144931002: RNCC: 5 | RNVC: 2
7633302135: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-542-1637
Access Cover

145421637
61201140AA: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-14-464-9621
Access Cover

144649621
365A52-1500-00: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-376-5298
Anchor Strap

143765298
NO PRIMARY REF14-376-5298: RNCC: 3 | RNVC: 2
404304618: RNCC: 5 | RNVC: 9
404304618: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-390-0079
Mounting Bracket

143900079
365A51-1034-21: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-271-6975
Bumper

142716975
NO PRIMARY REF14-271-6975: RNCC: 3 | RNVC: 2
56998A: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-440-1576
Butt Hinge

144401576
160G722286-01: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-490-2917
Mounting Plate

144902917
J05085-02-0700P014: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-261-4989
Hand Crank Arm

142614989
NO PRIMARY REF14-261-4989: RNCC: 3 | RNVC: 2
C10399-15AREP49: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-351-4930
Access Cover

143514930
6817198-000: RNCC: 3 | RNVC: 2
AZ18431: RNCC: 3 | RNVC: 2

12 Sep 1978

5340-14-327-3110
Retaining Strap

143273110
3160S73-37-775: RNCC: 3 | RNVC: 2
85-649-3150: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-375-9612
Angle Bracket

143759612
NO PRIMARY REF14-375-9612: RNCC: 3 | RNVC: 2
404111520: RNCC: 5 | RNVC: 2
404111520: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-360-3223
Loop Clamp

143603223
7810025000: RNCC: 3 | RNVC: 2
1723-01: RNCC: 5 | RNVC: 2

23 Nov 1979

5340-14-335-7669
Runner

143357669
160-888423-01: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-230-7319
Handwheel

142307319
GSM137-001F15-1N1: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-269-4020
Retaining Band

142694020
3295-08-18-08: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-298-9743
Control Rod

142989743
404111164-02: RNCC: 3 | RNVC: 2
270101164-02: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-501-2118
Mounting Plate

145012118
412414-201-22-03-90: RNCC: 3 | RNVC: 2
412414-201.22.03.90: RNCC: 3 | RNVC: 2
F300 0T 025 2523: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-317-9098
Luggage Handle

143179098
PE2-005-120: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-511-2585
Angle Bracket

145112585
241961: RNCC: 3 | RNVC: 2
241961-001: RNCC: 5 | RNVC: 9

9 Dec 1998

5340-14-238-9811
Loop Clamp

142389811
410523: RNCC: 3 | RNVC: 9
062410523: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-504-3008
Mounting Bracket

145043008
3699676M92: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-340-2837
Angle Bracket

143402837
BA3318: RNCC: 3 | RNVC: 2
193963: RNCC: 5 | RNVC: 2
222490: RNCC: 5 | RNVC: 2

14 Feb 1977

5340-14-476-0467
Access Cover

144760467
5000047356: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-358-0065
Rod End Clevis

143580065
A11A263350051: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-14-536-1886
Access Cover

145361886
803228140116: RNCC: 3 | RNVC: 2

15 Jul 2003

5340-14-500-9801
Rod End Clevis

145009801
E69992000002: RNCC: 3 | RNVC: 2
F300 0T 025 0014: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-363-8603
Anchor Strap

143638603
0000158517: RNCC: 3 | RNVC: 2
0000158517: RNCC: 5 | RNVC: 9
158517: RNCC: 5 | RNVC: 9

7 Aug 1980

5340-14-551-3515
Angle Bracket

145513515
RA1M706426131N1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-439-2243
Access Cover

144392243
39453612: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-446-4169
Rod End Clevis

144464169
4110545: RNCC: 3 | RNVC: 2
4110545: RNCC: 5 | RNVC: 9

19 Mar 1991

5340-14-411-7900
Retaining Strap

144117900
5171547500: RNCC: 3 | RNVC: 2
715475: RNCC: 5 | RNVC: 2

3 Sep 1986

5340-14-338-7066
Access Cover

143387066
45520A: RNCC: 3 | RNVC: 9
2171: RNCC: 5 | RNVC: 9

17 Dec 1976

5340-14-407-5107
Rod End Clevis

144075107
153739: RNCC: 3 | RNVC: 2

27 Feb 1986

5340-14-403-0457
Mounting Plate

144030457
29739147: RNCC: 3 | RNVC: 2
29739147: RNCC: 5 | RNVC: 9

25 Jul 1985

5340-14-484-7240
Access Cover

144847240
8003702M00: RNCC: 3 | RNVC: 2
1051379Y00: RNCC: 5 | RNVC: 9

5 Dec 1996

5340-14-551-3481
Angle Bracket

145513481
RA1M702446143: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-504-0914
Mounting Plate

145040914
39079713: RNCC: 3 | RNVC: 2
39079713: RNCC: 3 | RNVC: 9

5 Feb 1998

5340-14-417-3660
Butt Hinge

144173660
39C60X50GAUCHECHROME: RNCC: 3 | RNVC: 2
REP1B60X50GAUCHECHROME: RNCC: 5 | RNVC: 2

6 Jul 1987

5340-14-439-7719
Access Cover

144397719
0249177970: RNCC: 3 | RNVC: 2

23 May 1990

5340-14-451-2468
Pipe Hanger

144512468
PM1A726142800: RNCC: 3 | RNVC: 2
PM1A726142800: RNCC: 5 | RNVC: 2

6 Nov 1991

5340-14-365-5556
Anchor Strap

143655556
A11B221172120: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-412-1585
Anchor Strap

144121585
235491: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-402-1365
Rod End Clevis

144021365
223486: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-263-4494
Retaining Strap

142634494
M104784: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-274-2600
Retaining Strap

142742600
150224: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-521-1165
Clamping Catch

145211165
ACA 0055: RNCC: 3 | RNVC: 2
ACA0055: RNCC: 5 | RNVC: 2

11 Jul 2000

5340-14-489-1693
Mounting Bracket

144891693
927578: RNCC: 3 | RNVC: 2
927578: RNCC: 5 | RNVC: 9

2 Jul 1997

5340-14-438-8738
Angle Bracket

144388738
005062010057: RNCC: 3 | RNVC: 2
0049179: RNCC: 5 | RNVC: 2

10 Apr 1990

5340-14-409-3470
Butt Hinge

144093470
3006520: RNCC: 3 | RNVC: 2
3006520: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-435-0287
Access Cover

144350287
1004999R01: RNCC: 3 | RNVC: 2

16 Oct 1989

5340-14-502-5070
Mounting Bracket

145025070
5000452960: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-546-0822
Utility Access Door

145460822
MC3326F00: RNCC: 3 | RNVC: 2

13 Jun 2005

5340-14-245-1540
Anchor Strap

142451540
70483300: RNCC: 3 | RNVC: 2
483300: RNCC: 5 | RNVC: 9
70483300: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-286-4066
Retaining Clip

142864066
HE60C209: RNCC: 3 | RNVC: 2
HE60C209: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-398-9873
Access Cover

143989873
M122150: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-403-3490
Access Cover

144033490
73128: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-421-3367
Bow Handle

144213367
536736: RNCC: 3 | RNVC: 2

14 Jan 1988

5340-14-350-4734
Access Cover

143504734
180326: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-549-9756
Detent Plunger

145499756
F1262584: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-384-7119
Mounting Plate

143847119
20189385: RNCC: 3 | RNVC: 2
20189385: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-426-8050
Access Cover

144268050
DLT100969: RNCC: 3 | RNVC: 2

22 Sep 1988

5340-14-366-2835
Angle Bracket

143662835
A11A221176052A1: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-14-481-3693
Mounting Bracket

144813693
10285397: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-414-2525
Access Cover

144142525
3146173: RNCC: 3 | RNVC: 2
3146173: RNCC: 5 | RNVC: 2

28 Jan 1987

5340-14-439-2531
Mounting Bracket

144392531
6063513: RNCC: 3 | RNVC: 2
6063513: RNCC: 5 | RNVC: 2

25 Apr 1990

5340-14-543-3136
Fastener Pawl

145433136
071316000000927: RNCC: 3 | RNVC: 2

19 Oct 2004

5340-14-430-0373
Access Cover

144300373
20629905: RNCC: 3 | RNVC: 2
20629905: RNCC: 5 | RNVC: 9

27 Feb 1989

5340-14-527-5930
Loop Clamp

145275930
78651RH3AG: RNCC: 1 | RNVC: 2
78651RH3AG: RNCC: 3 | RNVC: 2

30 Oct 2001

5340-14-548-4293
Loop Clamp

145484293
EN4114F24WR1: RNCC: 2 | RNVC: 2

16 Jan 2006

5340-14-347-4721
Rod End Clevis

143474721
105071001201: RNCC: 3 | RNVC: 2
105071001201: RNCC: 5 | RNVC: 2

1 Mar 1978

5340-14-478-3986
Mounting Bracket

144783986
0766918C00: RNCC: 3 | RNVC: 2

27 Oct 1995

5340-14-518-1107
Loop Clamp

145181107
5000587870: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-521-1516
Access Cover

145211516
F1262264: RNCC: 3 | RNVC: 2
F1262264: RNCC: 5 | RNVC: 2

12 Jul 2000

5340-14-508-8220
Access Cover

145088220
203E956: RNCC: 3 | RNVC: 2
203E956: RNCC: 5 | RNVC: 2

30 Sep 1998

5340-14-524-5186
Access Cover

145245186
1031500613: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-14-485-5028
Anchor Strap

144855028
TB1030645: RNCC: 3 | RNVC: 2

29 Jan 1997

5340-14-484-5558
Self-Locking Insert

144845558
T700A2521286123: RNCC: 3 | RNVC: 2

21 Nov 1996

5340-14-263-4651
Retaining Strap

142634651
M425637: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-481-2217
Mounting Plate

144812217
92 92 26: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-14-539-7506
Bumper

145397506
09.704.513: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-14-031-2409
Butt Hinge

140312409
BJM00175: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-547-7735
Mounting Bracket

145477735
5000723783: RNCC: 3 | RNVC: 2

12 Nov 2005

5340-14-480-0561
Mounting Bracket

144800561
10188586: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-348-6793
Mending Plate

143486793
226583: RNCC: 3 | RNVC: 2
226583: RNCC: 5 | RNVC: 9

19 Apr 1978

5340-14-312-9753
Retaining Strap

143129753
18834: RNCC: 3 | RNVC: 2
5800400213: RNCC: 5 | RNVC: 2
7701013099: RNCC: 5 | RNVC: 2
5800400213: RNCC: 5 | RNVC: 9
7701013099: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-546-0486
Mounting Bracket

145460486
10711666000: RNCC: 3 | RNVC: 2

8 Jun 2005

5340-14-544-1361
Angle Bracket

145441361
Y00004921: RNCC: 3 | RNVC: 2
Y00004921: RNCC: 5 | RNVC: 2

5 Jan 2005

5340-14-479-4833
Protection Bellows

144794833
SNG-971-PRZ-540-AREP70: RNCC: 3 | RNVC: 2
SOUFFLETDIA100LG160: RNCC: 5 | RNVC: 2

15 Jan 1996

5340-14-396-8546
Doorknob

143968546
PA546-122-M1-9-P1: RNCC: 3 | RNVC: 9

27 Nov 1984

5340-14-529-5765
Bumper

145295765
330A87-3120-22: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-340-7093
Bumper

143407093
7-103-55-0482: RNCC: 3 | RNVC: 2
85-644-4750: RNCC: 6 | RNVC: 9

14 Feb 1977

5340-14-517-4632
Loop Clamp

145174632
B31VA0212-034: RNCC: 3 | RNVC: 2

15 Dec 1999

5340-14-310-6129
Retaining Strap

143106129
R00267-64: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-399-7454
Swivel Caster

143997454
TP5BD200-47R: RNCC: 3 | RNVC: 2
M4ZS583D1004: RNCC: 5 | RNVC: 9

14 Mar 1985

5340-14-521-1085
Arched Cushion

145211085
MAT169-0027F18DE89: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-14-397-0006
Access Cover

143970006
LH3285-402: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-390-6666
Expansion Plug

143906666
E40-2219REP15: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-395-5309
Mounting Bracket

143955309
5-1881B43152-1177: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-325-9159
Key Blank

143259159
25511B9-52X11-1XC38: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-534-1308
Mounting Bracket

145341308
332P68-1666-0301: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-296-3498
Mending Plate

142963498
CAP10-10-17-032: RNCC: 3 | RNVC: 9

1 Jan 1973

5340-14-462-3738
Runner

144623738
P3C006387-00: RNCC: 3 | RNVC: 9
5046131: RNCC: 5 | RNVC: 9

15 Apr 1993

5340-14-325-2051
Angle Bracket

143252051
523932: RNCC: 3 | RNVC: 2
85-673-7180: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-368-3326
Mending Plate

143683326
NO PRIMARY REF14-368-3326: RNCC: 3 | RNVC: 2
90-23-046: RNCC: 5 | RNVC: 9
9023046: RNCC: 5 | RNVC: 9

20 Feb 1981

Load More Results