What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 131 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 131 of 446

5340-14-381-9633
Rod End Clevis

143819633
105102001001: RNCC: 3 | RNVC: 2
105102001001: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-496-4265
Access Cover

144964265
209963: RNCC: 3 | RNVC: 2
F300 0T 021 5180: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-555-8461
Rod End Clevis

145558461
0164240240: RNCC: 3 | RNVC: 2

18 Dec 2007

5340-14-522-4324
Mounting Plate

145224324
4322 021 31846: RNCC: 3 | RNVC: 2
91492058: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-14-550-3033
Access Cover

145503033
210883: RNCC: 3 | RNVC: 2

15 Jun 2006

5340-14-533-8017
Access Cover

145338017
F1263422: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-208-6421
Access Cover

142086421
456028121: RNCC: 3 | RNVC: 9

1 Jan 1964

5340-14-534-7068
Access Cover

145347068
10472229: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-547-2269
Rod End Clevis

145472269
21230079-00: RNCC: 3 | RNVC: 2

5 Oct 2005

5340-14-549-6563
Bumper

145496563
MC201-215278-30: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-14-296-1186
T Plate

142961186
341A21-1025-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-343-6895
Slide Keeper

143436895
11630-150-055: RNCC: 3 | RNVC: 2

13 Jul 1977

5340-14-536-3710
Mounting Bracket

145363710
VTC304-23STLC10-90020: RNCC: 3 | RNVC: 9
SYQ3286: RNCC: 5 | RNVC: 2

29 Jul 2003

5340-14-495-4871
Mounting Plate

144954871
B4743360: RNCC: 3 | RNVC: 2
Z37433-64: RNCC: 5 | RNVC: 2
859291: RNCC: 5 | RNVC: 9
F300 0T 019 3397: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-238-6787
Handwheel

142386787
B0044BB51APL2-2REP19: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-212-7506
Access Cover

142127506
2840-24: RNCC: 3 | RNVC: 2
2840-24: RNCC: 8 | RNVC: 2

1 Jan 1964

5340-14-389-4434
Mounting Plate

143894434
365A35-1010-25Z: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-501-9469
Access Cover

145019469
332A62-3433-20: RNCC: 3 | RNVC: 2

19 Nov 1997

5340-14-325-7187
Angle Bracket

143257187
M3C707-17-813: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-528-7584
Mounting Plate

145287584
78786-050B11F: RNCC: 3 | RNVC: 2

14 Feb 2002

5340-14-533-3962
Access Cover

145333962
708010S000-30B: RNCC: 3 | RNVC: 2

3 Feb 2003

5340-14-452-7726
Angle Bracket

144527726
A300-012: RNCC: 3 | RNVC: 2

15 Jan 1992

5340-14-511-6219
Access Cover

145116219
78740B32-70-110: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-397-6364
Loop Clamp

143976364
205318: RNCC: 3 | RNVC: 2
15992-052: RNCC: 5 | RNVC: 2
V205318: RNCC: 5 | RNVC: 2
70011: RNCC: 5 | RNVC: 9

14 Dec 1984

5340-14-412-7087
Loop Clamp

144127087
556423-00: RNCC: 3 | RNVC: 2
SOG556423-00: RNCC: 5 | RNVC: 9

27 Oct 1986

5340-14-232-0669
Mending Plate

142320669
404-26: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-222-5451
Access Cover

142225451
2-143267-5: RNCC: 3 | RNVC: 2
143267: RNCC: 5 | RNVC: 9
2-143267-5: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-300-0812
Retaining Strap

143000812
23034480: RNCC: 3 | RNVC: 2
23034480-6: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-311-1173
Threaded Rod End

143111173
NO PRIMARY REF14-311-1173: RNCC: 3 | RNVC: 2
206HK115: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-315-0355
Mounting Plate

143150355
NO PRIMARY REF14-315-0355: RNCC: 3 | RNVC: 2
64H0016DET41: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-425-8859
Anchor Strap

144258859
017629L01TRA: RNCC: 3 | RNVC: 2
017629L: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-14-413-9793
Access Cover

144139793
BJQ408004: RNCC: 3 | RNVC: 2
408004: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-441-3156
Rod End Clevis

144413156
37150: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-347-9826
Access Cover

143479826
623236: RNCC: 3 | RNVC: 2
623236: RNCC: 5 | RNVC: 9

29 Mar 1978

5340-14-494-4777
Access Hole Frame

144944777
T53 242 30: RNCC: 3 | RNVC: 2
F300 0T 017 3826: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-394-9126
Access Cover

143949126
20731919: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-349-9379
Rod End Clevis

143499379
142558: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-382-4956
Access Cover

143824956
20070974: RNCC: 3 | RNVC: 2
20070974: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-454-6972
Detent Plunger

144546972
2085-03-040: RNCC: 3 | RNVC: 2
89411659: RNCC: 5 | RNVC: 9

9 Apr 1992

5340-14-259-5122
Runner

142595122
RU761-43M311-1P4B: RNCC: 3 | RNVC: 2
761-43M311-1P4B: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-485-1638
Angle Bracket

144851638
W1831625: RNCC: 3 | RNVC: 2
P18316-25W: RNCC: 5 | RNVC: 2
W18316-25: RNCC: 5 | RNVC: 2

10 Jan 1997

5340-14-528-1271
Threaded Rod End

145281271
RPL201-300-055: RNCC: 3 | RNVC: 2

19 Dec 2001

5340-14-315-7366
Retaining Strap

143157366
321A84-0081-21: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-431-1955
Mounting Plate

144311955
X556324: RNCC: 3 | RNVC: 2
X556324-75918: RNCC: 5 | RNVC: 2

11 Apr 1989

5340-14-371-4119
Access Cover

143714119
6254-30123: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-263-9515
Lock Bolt

142639515
321A23-2024-21: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-350-1609
Strap Fastener Loop

143501609
MP1019P: RNCC: 3 | RNVC: 2
2088: RNCC: 5 | RNVC: 9
MP2019P: RNCC: 5 | RNVC: 9
85-688-4493: RNCC: 6 | RNVC: 9

14 Jun 1978

5340-14-380-5000
Loop Clamp

143805000
120015-10: RNCC: 3 | RNVC: 2
CN26: RNCC: 5 | RNVC: 2

29 Nov 1982

5340-14-469-1016
Mounting Bracket

144691016
305-327-204-0: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-14-367-6517
Mending Plate

143676517
X12228-16: RNCC: 3 | RNVC: 2
E7035-014: RNCC: 5 | RNVC: 2
X12228-16: RNCC: 5 | RNVC: 2

19 Jan 1981

5340-14-316-5502
Rod End Connector

143165502
321A27-0341-00: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-542-9976
Access Cover

145429976
SH2759-03-04: RNCC: 3 | RNVC: 2

18 Aug 2004

5340-14-469-1000
Rod End Clevis

144691000
305-304-202-0: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-14-377-6286
Pipe Hanger

143776286
366A61-2043-2001: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-322-1754
Rod End Clevis

143221754
A70-74305: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-363-8914
Mending Plate

143638914
NO PRIMARY REF14-363-8914: RNCC: 3 | RNVC: 2
Z46091: RNCC: 5 | RNVC: 9

7 Aug 1980

5340-14-383-5888
Mounting Plate

143835888
366A35-0125-20: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-398-6410
Webbing Strap

143986410
E20-2M: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-543-3280
Mounting Plate

145433280
10644217: RNCC: 3 | RNVC: 2

20 Oct 2004

5340-14-447-7726
Dashpot Piston

144477726
29026802: RNCC: 3 | RNVC: 2

5 Jun 1991

5340-14-438-7076
Mending Plate

144387076
TB1030729: RNCC: 3 | RNVC: 2

30 Mar 1990

5340-14-459-3104
Mounting Plate

144593104
0071087010: RNCC: 3 | RNVC: 2

24 Nov 1992

5340-14-444-7522
Retaining Strap

144447522
123604113: RNCC: 3 | RNVC: 9

21 Jan 1991

5340-14-445-4947
Mounting Bracket

144454947
ST406M12P118: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-14-439-6840
Mounting Bracket

144396840
16849431: RNCC: 3 | RNVC: 2
16849431: RNCC: 5 | RNVC: 9

16 May 1990

5340-14-329-5409
Access Hole Frame

143295409
TH20N276: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-400-3374
Access Cover

144003374
20247338: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-540-7346
Access Cover

145407346
38051146: RNCC: 3 | RNVC: 2
106206: RNCC: 5 | RNVC: 2
4848ZG8613181062: RNCC: 6 | RNVC: 9

22 Apr 2004

5340-14-469-8468
Access Cover

144698468
114250-12520: RNCC: 3 | RNVC: 2

11 May 1994

5340-14-445-0554
Synchro Clamp

144450554
75615: RNCC: 3 | RNVC: 2

31 Jan 1991

5340-14-466-5450
Access Cover

144665450
168363: RNCC: 3 | RNVC: 2
89170297: RNCC: 5 | RNVC: 2

15 Nov 1993

5340-14-511-3217
Access Cover

145113217
4135910121: RNCC: 3 | RNVC: 2

16 Dec 1998

5340-14-524-0406
Mounting Bracket

145240406
GE5ACA08: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-14-415-0992
Access Cover

144150992
543227: RNCC: 3 | RNVC: 2

26 Mar 1987

5340-14-230-6328
Rod End Clevis

142306328
STK156350: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-317-2150
Access Cover

143172150
0064762440: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-521-3403
Utility Access Door

145213403
10453038: RNCC: 3 | RNVC: 2

20 Jul 2000

5340-14-525-6551
Access Cover

145256551
20 242 030 8270: RNCC: 3 | RNVC: 2
354.2122.5500: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-535-4243
Mounting Bracket

145354243
5430128265: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-465-3653
Mending Plate

144653653
50020242: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-335-2758
Bow Handle

143352758
16336892: RNCC: 3 | RNVC: 2
16336892: RNCC: 3 | RNVC: 9

30 Jun 1976

5340-14-488-8923
Synchro Clamp

144888923
3617.197 196: RNCC: 3 | RNVC: 2
F300 0T 023 6019: RNCC: 6 | RNVC: 9

11 Jun 1997

5340-14-545-9381
Access Cover

145459381
715169: RNCC: 3 | RNVC: 2

30 May 2005

5340-14-500-3615
Mounting Plate

145003615
AGP 315: RNCC: 3 | RNVC: 2
AGP315: RNCC: 3 | RNVC: 2
F300 0T 024 3708: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-540-0092
Access Cover

145400092
F1399229: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-429-2425
Block Clamp

144292425
DA1D202489100: RNCC: 3 | RNVC: 2

11 Jan 1989

5340-14-449-3462
Rod End Clevis

144493462
PM1A379316012: RNCC: 3 | RNVC: 2
PM1A379316012: RNCC: 5 | RNVC: 2

7 Aug 1991

5340-14-428-2167
Access Cover

144282167
000202458150: RNCC: 3 | RNVC: 2

7 Dec 1988

5340-14-523-3236
Access Cover

145233236
075035: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-250-8526
Rod End Clevis

142508526
D760G482: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-213-6579
Access Cover

142136579
22026004300: RNCC: 3 | RNVC: 2
26L43: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-503-6765
Threaded Rod End

145036765
10085875: RNCC: 3 | RNVC: 2

23 Jan 1998

5340-14-295-1029
Access Cover

142951029
275734: RNCC: 3 | RNVC: 2
275734: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-516-1374
Access Cover

145161374
47148481: RNCC: 3 | RNVC: 2

13 Sep 1999

5340-14-445-1654
Mounting Plate

144451654
534123: RNCC: 3 | RNVC: 2

4 Feb 1991

5340-14-451-8293
Blank Panel

144518293
16795509: RNCC: 3 | RNVC: 9

4 Dec 1991

5340-14-440-2455
Angle Bracket

144402455
30301595N: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-457-1852
Access Cover

144571852
39467504: RNCC: 3 | RNVC: 2
39467504: RNCC: 5 | RNVC: 9

13 Aug 1992

5340-14-349-8929
Access Cover

143498929
204801: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-399-4732
Access Cover

143994732
16696605: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-533-6693
Lock Bolt

145336693
F1261558: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-14-359-5651
Anchor Strap

143595651
144704407: RNCC: 3 | RNVC: 2
144704407: RNCC: 5 | RNVC: 2

15 Oct 1979

5340-14-341-8003
Mounting Bracket

143418003
279Y4: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-509-1991
Mounting Plate

145091991
46238415: RNCC: 3 | RNVC: 2
46238415: RNCC: 3 | RNVC: 9

21 Oct 1998

5340-14-361-6826
Anchor Strap

143616826
5000496598: RNCC: 3 | RNVC: 2
5000496598: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-14-539-5564
Access Cover

145395564
SZ09.704.698: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-348-7112
Access Cover

143487112
1425002: RNCC: 3 | RNVC: 2
1425002: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-433-9020
Runner

144339020
022376M: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-14-216-4248
Snap Hook

142164248
1816: RNCC: 3 | RNVC: 2
AP37: RNCC: 5 | RNVC: 2
1816: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-512-2339
Mounting Bracket

145122339
3BM00807AAAA: RNCC: 3 | RNVC: 2

8 Feb 1999

5340-14-380-1427
Retaining Clip

143801427
0606436200: RNCC: 3 | RNVC: 2
0606436200: RNCC: 3 | RNVC: 2

8 Nov 1982

5340-14-462-6779
Loop Clamp

144626779
008965572: RNCC: 3 | RNVC: 9

28 Apr 1993

5340-14-466-0487
Mounting Bracket

144660487
10027997: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-14-461-4832
Mounting Bracket

144614832
2156-01-020: RNCC: 3 | RNVC: 2
89480020: RNCC: 5 | RNVC: 9

10 Mar 1993

5340-14-341-0293
Detent Plunger

143410293
9H000751-01: RNCC: 3 | RNVC: 2
9H000751-01: RNCC: 5 | RNVC: 9

16 Mar 1977

5340-14-328-6815
Mending Plate

143286815
M208-25015: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-303-7351
Butt Hinge

143037351
40BC60X40CADMIE: RNCC: 3 | RNVC: 2
J36190-60X40X2LAIT0NCADMIE: RNCC: 4 | RNVC: 1

1 Jan 1973

5340-14-307-3865
Rim Lock Set

143073865
J36-811ENCL0IS0NNE40: RNCC: 2 | RNVC: 2

1 Jan 1974

5340-14-394-7230
Rim Lock Set

143947230
NO PRIMARY REF14-394-7230: RNCC: 3 | RNVC: 2
6600-04FE015: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-410-2923
Butt Hinge

144102923
332A22-1166-01: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-14-377-2397
Pipe Hanger

143772397
366A53-0100-24: RNCC: 3 | RNVC: 2

17 May 1982

5340-14-454-8979
Angle Bracket

144548979
2085-06-005: RNCC: 3 | RNVC: 2
89411716: RNCC: 5 | RNVC: 9

24 Apr 1992

5340-14-387-7596
Retaining Strap

143877596
ST159-2M311-1P44: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-14-419-5432
Angle Bracket

144195432
M208-61038: RNCC: 3 | RNVC: 2

21 Oct 1987

5340-14-282-8697
Turnbuckle Body

142828697
649-91-12M: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-040-5540
Lock Bolt

140405540
330A22-2330-00: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-443-8000
Block Clamp

144438000
02115100509-072: RNCC: 3 | RNVC: 2
021151-002-09-072: RNCC: 5 | RNVC: 2

5 Dec 1990

5340-14-463-3671
Retaining Bail

144633671
16298067: RNCC: 1 | RNVC: 2
044H03-000000-0100: RNCC: 3 | RNVC: 2
0903155M00: RNCC: 5 | RNVC: 2
16298067: RNCC: 5 | RNVC: 9

9 Jun 1993

5340-14-339-3602
Bow Handle

143393602
PLU20-117: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-469-2456
Loop Clamp

144692456
51121905005: RNCC: 3 | RNVC: 2
28PE05: RNCC: 5 | RNVC: 2
85-695-3150: RNCC: 6 | RNVC: 9

13 Apr 1994

5340-14-296-3531
Angle Bracket

142963531
CAP10-20-09-011: RNCC: 3 | RNVC: 9

1 Jan 1973

5340-14-520-4451
Mounting Plate

145204451
M45AA0101-785: RNCC: 3 | RNVC: 2
M45AA0101-785: RNCC: 5 | RNVC: 9

17 May 2000

5340-14-419-3786
Control Rod

144193786
688-41217-00: RNCC: 3 | RNVC: 2

16 Oct 1987

5340-14-360-7064
Rigid Caster

143607064
62019-01-85: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-253-8823
Strap Hinge

142538823
LN331087-3221123: RNCC: 2 | RNVC: 2
LN331087-3221123: RNCC: 3 | RNVC: 2
32-211-23: RNCC: 5 | RNVC: 2
LN331087-3221123: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-476-0415
Section Block Clamp

144760415
207310016: RNCC: 3 | RNVC: 2
PAA73-10-016: RNCC: 5 | RNVC: 2

17 May 1995

5340-14-257-2355
Loop Clamp

142572355
330A52-0439-20: RNCC: 3 | RNVC: 2
330A52-0439-2000: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-551-5119
Mounting Bracket

145515119
730010S931-10A: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-534-8670
Bolt And Spacer Kit

145348670
KIT25LB-X10: RNCC: 3 | RNVC: 2
SYQ2565: RNCC: 5 | RNVC: 2

9 Apr 2003

5340-14-475-8394
Mounting Plate

144758394
4OP324CEZ: RNCC: 3 | RNVC: 2
1039514F00: RNCC: 5 | RNVC: 2
40P324CEZ: RNCC: 5 | RNVC: 2
7946-055: RNCC: 5 | RNVC: 2

9 May 1995

5340-14-302-0258
Pipe Hanger

143020258
A10-14-189-00-0: RNCC: 3 | RNVC: 2
A10-14-189-00-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-370-8725
Pipe Hanger

143708725
303-931-303-0: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-440-6402
Access Cover

144406402
16285569: RNCC: 3 | RNVC: 2

18 Jul 1990

5340-14-520-3461
Mounting Plate

145203461
40147637: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-482-8070
Mounting Plate

144828070
HSS831AH562: RNCC: 3 | RNVC: 2
89167378: RNCC: 5 | RNVC: 2

25 Jul 1996

5340-14-372-2482
Access Cover

143722482
486652: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-388-4654
Access Cover

143884654
52030000600: RNCC: 3 | RNVC: 2
520300006: RNCC: 5 | RNVC: 2

3 Nov 1983

5340-14-245-1544
Anchor Strap

142451544
70483401: RNCC: 3 | RNVC: 2
483401: RNCC: 5 | RNVC: 9
70483401: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-520-0677
Access Cover

145200677
47134913: RNCC: 3 | RNVC: 2

10 May 2000

5340-14-421-6016
Access Cover

144216016
20733588: RNCC: 3 | RNVC: 2
20733588: RNCC: 5 | RNVC: 9

20 Jan 1988

5340-14-354-1106
Retaining Strap

143541106
74799: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-502-7797
Expansion Shield

145027797
6Y5262: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-551-4622
Access Cover

145514622
714556: RNCC: 3 | RNVC: 2

25 Sep 2006

5340-14-446-3903
Access Cover

144463903
3511 191 94961: RNCC: 3 | RNVC: 2

18 Mar 1991

5340-14-534-4879
Access Cover

145344879
F1263936: RNCC: 3 | RNVC: 2
F1263936: RNCC: 5 | RNVC: 2

26 Mar 2003

5340-14-540-7986
Handwheel

145407986
63318: RNCC: 3 | RNVC: 2

23 Apr 2004

5340-14-439-6770
Access Cover

144396770
16787688: RNCC: 3 | RNVC: 2
16787688: RNCC: 5 | RNVC: 9

16 May 1990

5340-14-254-7761
Retaining Strap

142547761
052235: RNCC: 3 | RNVC: 9
52235: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-528-5766
Access Cover

145285766
908512: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-447-6094
Anchor Strap

144476094
3103581: RNCC: 3 | RNVC: 2
3103581: RNCC: 5 | RNVC: 2

29 May 1991

5340-14-482-7214
Bumper

144827214
1077130B01: RNCC: 3 | RNVC: 2

25 Jul 1996

5340-14-474-7468
Access Cover

144747468
5000991857: RNCC: 3 | RNVC: 2

1 Mar 1995

5340-14-514-5511
Access Cover

145145511
6005003161: RNCC: 3 | RNVC: 2

28 May 1999

5340-14-502-2134
Access Cover

145022134
0390731230: RNCC: 3 | RNVC: 2
6106140450: RNCC: 5 | RNVC: 9

26 Nov 1997

5340-14-333-8038
Access Door Hinge

143338038
184246: RNCC: 3 | RNVC: 2

23 Apr 1976

5340-14-295-1300
Access Cover

142951300
2260601340: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-513-0578
Webbing Strap

145130578
009592035P: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-14-488-2140
Mounting Plate

144882140
29659089: RNCC: 3 | RNVC: 2
29659089: RNCC: 3 | RNVC: 9

23 Apr 1997

5340-14-545-5568
Angle Bracket

145455568
332A24432020: RNCC: 3 | RNVC: 2
332A24.0309.33: RNCC: 5 | RNVC: 2

19 Apr 2005

5340-14-502-6254
Retaining Clip

145026254
7703079074: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-548-9420
Mounting Plate

145489420
T070G1002222: RNCC: 3 | RNVC: 2

24 Feb 2006

5340-14-268-9928
Handwheel

142689928
MAT137-005F9ACIER: RNCC: 3 | RNVC: 2
553-000MA060F7-4N1: RNCC: 5 | RNVC: 2
GSM137-07F13ACIER: RNCC: 5 | RNVC: 2
GSM137-007F13ACIER: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-437-2008
Plug Button

144372008
EVT422-009: RNCC: 3 | RNVC: 2

23 Jan 1990

5340-14-202-5948
Retaining Strap

142025948
NO PRIMARY REF14-202-5948: RNCC: 3 | RNVC: 2
53909: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-14-390-1632
Pipe Hanger

143901632
366A75-3399-20: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-411-1714
Mounting Plate

144111714
332A27-1461-01: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-514-9335
Angle Bracket

145149335
78690-19-38C: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-14-224-6304
Loop Clamp

142246304
D1553-3375: RNCC: 3 | RNVC: 2
K3375: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-243-1209
Snap Hook

142431209
4030T50-224: RNCC: 3 | RNVC: 2
409513010005: RNCC: 5 | RNVC: 2
200163: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-450-6314
Rim Lock Set

144506314
4871034-01: RNCC: 3 | RNVC: 2
4871034-01: RNCC: 3 | RNVC: 9

16 Oct 1991

5340-14-416-8134
Swivel Caster

144168134
HP6JA100-70L: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-316-8401
Runner

143168401
7910-2A: RNCC: 3 | RNVC: 2
3510-70100: RNCC: 5 | RNVC: 9
3510-70100: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-475-9576
Mounting Plate

144759576
713010S200-09A: RNCC: 3 | RNVC: 2

15 May 1995

5340-14-382-4171
Anchor Strap

143824171
043-11-06-001: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-457-7547
Locking Stay

144577547
6230203: RNCC: 3 | RNVC: 2
5045228: RNCC: 5 | RNVC: 9

17 Sep 1992

5340-14-512-8163
Rod End Clevis

145128163
202871: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-516-3852
Loop Clamp

145163852
ST48209: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-14-409-0473
Rod End Clevis

144090473
3076650: RNCC: 3 | RNVC: 2
3076650: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-420-4586
Access Cover

144204586
06180977: RNCC: 3 | RNVC: 2

10 Dec 1987

5340-14-352-9336
Access Cover

143529336
CV1005: RNCC: 3 | RNVC: 2
11AS: RNCC: 5 | RNVC: 2

14 Nov 1978

5340-14-257-6673
Handle Grip

142576673
60122: RNCC: 3 | RNVC: 2
20017-19: RNCC: 5 | RNVC: 9
60122: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-476-0355
Mounting Bracket

144760355
132E390-00: RNCC: 3 | RNVC: 2
132E390-00: RNCC: 5 | RNVC: 9

17 May 1995

5340-14-453-3747
Access Cover

144533747
A860969: RNCC: 3 | RNVC: 2
A860969: RNCC: 5 | RNVC: 9

19 Feb 1992

5340-14-525-5754
Mounting Bracket

145255754
20 242 190 5170: RNCC: 3 | RNVC: 2
130020.10: RNCC: 3 | RNVC: 9
01-30020: RNCC: 5 | RNVC: 9

14 Jun 2001

5340-14-339-3356
Rod End Clevis

143393356
190432: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-388-8138
Angle Bracket

143888138
11-991-000: RNCC: 3 | RNVC: 2
11-991-000: RNCC: 5 | RNVC: 9

29 Nov 1983

5340-14-533-0149
Access Cover

145330149
NO PRIMARY REF-14-533-0149: RNCC: 3 | RNVC: 2
V23552-A1400-P200: RNCC: 5 | RNVC: 2

16 Jan 2003

5340-14-299-2130
Anchor Strap

142992130
007-32-20-008: RNCC: 3 | RNVC: 2
EB007-32-20-008: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-328-7803
Access Cover

143287803
NO PRIMARY REF14-328-7803: RNCC: 3 | RNVC: 2
39-11V6-00-19M1: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-385-3194
Mounting Plate

143853194
365A32-4160-22: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-542-4280
Filler Opening Cap

145424280
DIA73X30: RNCC: 3 | RNVC: 2

10 Jul 2004

5340-14-519-9429
Access Cover

145199429
551998: RNCC: 3 | RNVC: 2
D9902085: RNCC: 5 | RNVC: 2

26 Apr 2000

5340-14-518-2314
Butt Hinge

145182314
5010059233: RNCC: 3 | RNVC: 2

28 Jan 2000

5340-14-480-0108
Detent Plunger

144800108
1976068: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-543-4539
Mounting Bracket

145434539
072944987000012: RNCC: 3 | RNVC: 2

30 Oct 2004

5340-14-483-4403
Bumper

144834403
BF989A1: RNCC: 3 | RNVC: 9

12 Sep 1996

5340-14-516-1635
Mounting Plate

145161635
2433-9604004: RNCC: 3 | RNVC: 9

14 Sep 1999

5340-14-241-1726
Runner

142411726
STK156288: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-211-1575
Retaining Band

142111575
27599: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-517-0128
Mounting Bracket

145170128
RA1M705111110A1: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-451-2460
Pipe Hanger

144512460
PM1A726142270: RNCC: 3 | RNVC: 2
PM1A726142270: RNCC: 5 | RNVC: 2

6 Nov 1991

5340-14-539-5544
Mounting Plate

145395544
SZ09.402.681: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-434-3104
Plate Spacer

144343104
071485B: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-537-4822
Mounting Bracket

145374822
6501DMV110: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-436-8500
Cover Strip

144368500
DA2C244926701A1: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-435-5151
Cover Strip

144355151
DA1D230328001A1: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-14-433-5888
Mounting Bracket

144335888
39065279: RNCC: 3 | RNVC: 2

2 Aug 1989

5340-14-523-0911
Mounting Plate

145230911
F1394757: RNCC: 3 | RNVC: 2

20 Dec 2000

5340-14-504-2489
Mounting Bracket

145042489
3597162M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-509-1170
Mounting Plate

145091170
10352094: RNCC: 3 | RNVC: 2
10352094: RNCC: 3 | RNVC: 9

21 Oct 1998

5340-14-434-0354
Mounting Plate

144340354
RP904458: RNCC: 3 | RNVC: 2

29 Aug 1989

5340-14-554-0078
Loop Clamp

145540078
372 108: RNCC: 3 | RNVC: 2
372 108: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-14-533-0515
Mounting Plate

145330515
10675561000: RNCC: 3 | RNVC: 2

21 Jan 2003

5340-14-354-7501
Mending Plate

143547501
140493: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-534-7011
Bow Handle

145347011
10175401: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-376-7810
Butt Hinge

143767810
DA2C111317836N1: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-509-1296
Self-Locking Insert

145091296
1325-2CNX1-4IN: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-543-4423
Mounting Bracket

145434423
072847987000200: RNCC: 3 | RNVC: 2

29 Oct 2004

5340-14-540-5802
Mounting Plate

145405802
61020228: RNCC: 3 | RNVC: 2

7 Apr 2004

5340-14-354-7287
Retaining Band

143547287
100492: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-551-5769
Mounting Plate

145515769
8036899R01: RNCC: 3 | RNVC: 2

5 Oct 2006

5340-14-532-3454
Mounting Bracket

145323454
899813: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-398-9797
Loop Clamp

143989797
200W562: RNCC: 3 | RNVC: 9
200W562: RNCC: 5 | RNVC: 2

6 Mar 1985

5340-14-508-1233
Mounting Plate

145081233
10217122: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-512-8868
Mounting Bracket

145128868
550592: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-360-6814
Retaining Strap

143606814
45431: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-418-0020
Bow Handle

144180020
X159901: RNCC: 3 | RNVC: 2
U401800970: RNCC: 5 | RNVC: 2
U401800970: RNCC: 5 | RNVC: 2

6 Aug 1987

5340-14-472-3464
Bridge Clamp

144723464
5540072: RNCC: 3 | RNVC: 2

19 Oct 1994

5340-14-343-7172
Retaining Strap

143437172
184313: RNCC: 3 | RNVC: 2

13 Jul 1977

5340-14-482-3006
Mounting Plate

144823006
D60365: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-14-554-0536
Loop Clamp

145540536
507 514: RNCC: 3 | RNVC: 2
507 514: RNCC: 3 | RNVC: 2

8 Jun 2007

5340-14-371-8449
Angle Bracket

143718449
NO PRIMARY REF14-371-8449: RNCC: 3 | RNVC: 2
RF72-6024-2: RNCC: 5 | RNVC: 2

5 Aug 1981

5340-14-379-3385
Access Cover

143793385
NO PRIMARY REF14-379-3385: RNCC: 3 | RNVC: 2
V345-02301-0: RNCC: 5 | RNVC: 9
V345023010: RNCC: 5 | RNVC: 9

1 Oct 1982

5340-14-397-7082
Key Blank

143977082
9510-11CLAVETTE8X9X500E36-3: RNCC: 2 | RNVC: 2

14 Dec 1984

5340-14-473-8614
Mounting Bracket

144738614
332A87-0306-21: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-508-4897
Threaded Rod End

145084897
312-08633-001: RNCC: 3 | RNVC: 2

15 Sep 1998

5340-14-031-9683
Loop Clamp

140319683
CPE3-11-44-02: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-232-1235
Loop Clamp

142321235
0109 0002 010: RNCC: 3 | RNVC: 2
109002-10: RNCC: 5 | RNVC: 2
CM2: RNCC: 5 | RNVC: 2
T3: RNCC: 5 | RNVC: 9
2-03076: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-472-8841
Angle Bracket

144728841
332A58-2083-20: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-469-1064
Mounting Bracket

144691064
305-803-001-0: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-14-345-8470
Plug Button

143458470
6238-22555: RNCC: 3 | RNVC: 2
6238-22555: RNCC: 5 | RNVC: 2

5 Nov 1977

5340-14-531-2297
Mounting Bracket

145312297
341A72-9028-00: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-517-9608
Pipe Hanger

145179608
307-802-303-0: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-14-398-9540
Rod End Clevis

143989540
NO PRIMARY REF14-398-9540: RNCC: 3 | RNVC: 2
348-05223-0: RNCC: 5 | RNVC: 9
348052230: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-384-3550
Butt Hinge

143843550
LS05-006-20: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-494-9634
Mounting Plate

144949634
NO PRIMARY REF14-494-9634: RNCC: 3 | RNVC: 2
5453051: RNCC: 5 | RNVC: 2
F300 0T 018 1199: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-529-1568
Mounting Plate

145291568
457-12373-000: RNCC: 3 | RNVC: 2

13 Mar 2002

5340-14-389-1103
Bumper

143891103
366A21-1186-20: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-421-1505
Rod End Clevis

144211505
MKM043153301: RNCC: 3 | RNVC: 2
MKM043153301: RNCC: 5 | RNVC: 2

6 Jan 1988

5340-14-451-1035
Access Cover

144511035
BLC238693: RNCC: 3 | RNVC: 2

30 Oct 1991

5340-14-479-3518
Metal Grille

144793518
FH01PD210104: RNCC: 3 | RNVC: 9

10 Jan 1996

5340-14-361-7340
Rod End Clevis

143617340
16389: RNCC: 3 | RNVC: 2
5196: RNCC: 5 | RNVC: 2

20 Feb 1980

5340-14-425-5944
Access Cover

144255944
562028: RNCC: 3 | RNVC: 2

12 Jul 1988

5340-14-353-0543
Angle Bracket

143530543
A11A231472020: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-500-4465
Pipe Hanger

145004465
D63204640000: RNCC: 3 | RNVC: 2
F300 0T 024 4631: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-449-8752
Mounting Bracket

144498752
60728: RNCC: 3 | RNVC: 2
91705857: RNCC: 5 | RNVC: 2

11 Sep 1991

5340-14-546-9182
Access Cover

145469182
61017522AA00: RNCC: 3 | RNVC: 2
8057654B00: RNCC: 5 | RNVC: 2

7 Sep 2005

5340-14-524-3335
Mounting Plate

145243335
1051322S00: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-14-555-6445
Mounting Bracket

145556445
82392341000: RNCC: 3 | RNVC: 2

5 Dec 2007

5340-14-332-1599
Control Rod

143321599
TGC1790: RNCC: 3 | RNVC: 2
BAZ3723: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-470-7571
Access Cover

144707571
0390127100: RNCC: 3 | RNVC: 2

6 Jul 1994

5340-14-324-1634
Anchor Strap

143241634
000MA0427F4REPAPRIME: RNCC: 3 | RNVC: 2
000MA427F32REPAPRIME: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-403-3693
Angle Bracket

144033693
479316V: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-378-9075
Anchor Strap

143789075
5000014933: RNCC: 3 | RNVC: 2
5000014933: RNCC: 5 | RNVC: 9

6 Sep 1982

5340-14-402-6923
Swivel Caster

144026923
4RLB081: RNCC: 3 | RNVC: 9
RAS4RLB081: RNCC: 5 | RNVC: 9

19 Jul 1985

5340-14-554-1786
Access Cover

145541786
4672940B: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-543-4483
Mounting Bracket

145434483
AL100403: RNCC: 3 | RNVC: 2

30 Oct 2004

5340-14-446-0225
Mounting Plate

144460225
084-45-013-02: RNCC: 3 | RNVC: 2

4 Mar 1991

5340-14-478-1656
Mounting Bracket

144781656
321A75-0163-20: RNCC: 3 | RNVC: 2

11 Oct 1995

5340-14-445-9646
Angle Bracket

144459646
BMAR1-820: RNCC: 3 | RNVC: 2

27 Feb 1991

5340-14-522-3053
Mounting Bracket

145223053
36-7457-018: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-14-368-3056
Access Cover

143683056
P10261-35: RNCC: 3 | RNVC: 2
2131720: RNCC: 5 | RNVC: 2
2131720: RNCC: 5 | RNVC: 2

20 Feb 1981

5340-14-428-5795
Suction Cup

144285795
4607VEA000-0004: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-312-0916
Bow Handle

143120916
180055: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-549-5132
Runner

145495132
MC201-255183-30: RNCC: 3 | RNVC: 2

11 Apr 2006

5340-14-367-6503
Angle Bracket

143676503
V06315-07: RNCC: 3 | RNVC: 2
801049: RNCC: 5 | RNVC: 2
V06315-07: RNCC: 5 | RNVC: 2

19 Jan 1981

5340-14-412-9718
Loop Clamp

144129718
M3CZ705-15: RNCC: 3 | RNVC: 2

5 Nov 1986

5340-14-278-3302
Pipe Hanger

142783302
160-11523-34: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-327-2614
Angle Bracket

143272614
CRP10F4-06: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-455-8091
Mounting Plate

144558091
365A84-3113-07: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-352-7576
Access Cover

143527576
180122: RNCC: 3 | RNVC: 2
180122: RNCC: 5 | RNVC: 2

14 Nov 1978

5340-14-436-2110
Mounting Plate

144362110
DA2C228654001A1: RNCC: 3 | RNVC: 2

6 Dec 1989

5340-14-531-3287
Access Cover

145313287
RA1M625992802A1: RNCC: 3 | RNVC: 2

8 Aug 2002

5340-14-409-0747
Access Cover

144090747
4771620230: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-364-5917
Access Cover

143645917
5000119852: RNCC: 3 | RNVC: 2
5000119852: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-202-2123
Rod End Clevis

142022123
STE31: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-380-0602
Anchor Strap

143800602
53207: RNCC: 3 | RNVC: 9

8 Nov 1982

5340-14-548-9400
Webbing Strap

145489400
10713982000: RNCC: 3 | RNVC: 2

24 Feb 2006

5340-14-524-2969
Access Cover

145242969
025799M: RNCC: 3 | RNVC: 2

12 Mar 2001

5340-14-400-0231
Access Cover

144000231
609230: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-237-5248
Access Cover

142375248
70879616: RNCC: 3 | RNVC: 2
803B220: RNCC: 5 | RNVC: 2
70879616: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-370-7170
Anchor Strap

143707170
196375: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-392-9820
Access Cover

143929820
0000789279: RNCC: 3 | RNVC: 2
0000408542: RNCC: 3 | RNVC: 2
0000408542: RNCC: 5 | RNVC: 9
408542: RNCC: 5 | RNVC: 9

7 Apr 1984

5340-14-293-1881
Loop Clamp

142931881
51113105046: RNCC: 3 | RNVC: 2
25G46: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-496-5036
Mounting Plate

144965036
549976: RNCC: 3 | RNVC: 2
F300 0T 021 6057: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-384-7696
Access Cover

143847696
16761349: RNCC: 3 | RNVC: 2
16761349: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-388-4576
Rod End Clevis

143884576
02102005400: RNCC: 3 | RNVC: 2
021020054: RNCC: 5 | RNVC: 2

3 Nov 1983

5340-14-400-2595
Access Cover

144002595
0292900620: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-518-4987
Access Cover

145184987
8800832: RNCC: 3 | RNVC: 9

9 Feb 2000

5340-14-453-7846
Access Cover

144537846
1556439: RNCC: 3 | RNVC: 2
1556439: RNCC: 5 | RNVC: 2

10 Mar 1992

5340-14-544-9684
Access Cover

145449684
61397243AA: RNCC: 3 | RNVC: 2

8 Mar 2005

5340-14-546-6148
Access Cover

145466148
TS143832Y00: RNCC: 3 | RNVC: 2

21 Jul 2005

5340-14-420-6552
Locking Stay

144206552
100054: RNCC: 3 | RNVC: 9

16 Dec 1987

5340-14-502-0451
Access Cover

145020451
1030900009: RNCC: 3 | RNVC: 2

26 Nov 1997

5340-14-530-9431
Access Cover

145309431
45681392: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-14-527-7461
Access Cover

145277461
706556: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-14-518-1511
Loop Clamp

145181511
5003083066: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-524-8262
Access Cover

145248262
464863: RNCC: 3 | RNVC: 2

18 Apr 2001

5340-14-512-3086
Mounting Bracket

145123086
2021038R: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-14-380-4742
Access Cover

143804742
2206-515B502: RNCC: 3 | RNVC: 2

29 Nov 1982

5340-14-484-6582
Access Cover

144846582
29403678: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-520-6816
Access Cover

145206816
1078959G00: RNCC: 3 | RNVC: 2

31 May 2000

5340-14-521-2975
Mounting Bracket

145212975
10514238: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-14-340-7849
Rod End Clevis

143407849
401MA0031REP14: RNCC: 3 | RNVC: 2
401MA031REP14: RNCC: 5 | RNVC: 2

14 Feb 1977

5340-14-261-1498
Rod End Clevis

142611498
175-27-56: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-500-2820
Access Cover

145002820
307022029032A: RNCC: 3 | RNVC: 9
F300 0T 024 2880: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-340-9905
Access Cover

143409905
4RLB0101: RNCC: 3 | RNVC: 9
RAS4RLB0101: RNCC: 5 | RNVC: 9

16 Mar 1977

5340-14-331-0538
Anchor Strap

143310538
0035454504: RNCC: 3 | RNVC: 2
0035454504: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-533-9950
Mounting Bracket

145339950
712854: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-480-3418
Anchor Strap

144803418
39076540: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-551-5353
Access Cover

145515353
SZ16.726.096: RNCC: 3 | RNVC: 2

28 Sep 2006

5340-14-550-3289
Angle Bracket

145503289
2715847880: RNCC: 3 | RNVC: 2

15 Jun 2006

5340-14-248-9483
Access Cover

142489483
0133D326: RNCC: 3 | RNVC: 9
0133D326: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-349-5641
Access Cover

143495641
0057961050: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-479-9162
Mounting Bracket

144799162
646605: RNCC: 3 | RNVC: 2

14 Feb 1996

5340-14-533-4987
Angle Bracket

145334987
29404492: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-484-3863
Mounting Bracket

144843863
009149226P: RNCC: 3 | RNVC: 2

14 Nov 1996

5340-14-494-4412
Access Cover

144944412
N53 215 30: RNCC: 3 | RNVC: 2
F300 0T 017 3343: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-408-5446
Metal Molding

144085446
1909-23-66: RNCC: 3 | RNVC: 9

2 Apr 1986

5340-14-488-5028
Sliding Door Track

144885028
6202.0183.18: RNCC: 3 | RNVC: 2
F300 0T 023 6290: RNCC: 6 | RNVC: 9

14 May 1997

5340-14-518-1762
Track Stop

145181762
5010139840: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-507-4910
Lock Key

145074910
199210: RNCC: 3 | RNVC: 2

16 Jul 1998

5340-14-552-9800
Mounting Bracket

145529800
1814543: RNCC: 3 | RNVC: 2

20 Feb 2007

5340-14-538-7762
Handwheel

145387762
NGM0011040330023: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-408-5445
Bail Handle

144085445
1909-23-52: RNCC: 3 | RNVC: 9

2 Apr 1986

5340-14-539-5465
Cover Strip

145395465
SZ09.250.967: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-376-6605
Anchor Strap

143766605
420059L: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-389-2023
Angle Bracket

143892023
MY205151220G01: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-411-7882
Bow Handle

144117882
1909-23-46: RNCC: 3 | RNVC: 9

3 Sep 1986

5340-14-418-4961
Retaining Band

144184961
4771902350: RNCC: 3 | RNVC: 2

26 Aug 1987

5340-14-474-9528
Rigid Caster

144749528
3487-POR100P62: RNCC: 3 | RNVC: 2

15 Mar 1995

5340-14-315-9998
Access Cover

143159998
0260608641: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-362-3845
Access Cover

143623845
5000051641: RNCC: 3 | RNVC: 2
5000054919: RNCC: 5 | RNVC: 2
5000051641: RNCC: 5 | RNVC: 9

19 Mar 1980

5340-14-263-3582
Retaining Clip

142633582
R109716: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-366-8140
Anchor Strap

143668140
970257: RNCC: 3 | RNVC: 2
970257: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-031-0897
Access Cover

140310897
210788: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-554-0422
Loop Clamp

145540422
228 309: RNCC: 3 | RNVC: 2
228 309: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-14-488-8334
Retaining Strap

144888334
E4690278: RNCC: 3 | RNVC: 9

5 Jun 1997

5340-14-484-6637
Access Cover

144846637
29405329: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-553-4377
Mounting Bracket

145534377
0319102560: RNCC: 3 | RNVC: 2

4 Apr 2007

5340-14-359-0966
Pipe Hanger

143590966
A11A722202010: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-515-4049
Mounting Plate

145154049
21080028A: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-293-6700
Bumper

142936700
BCM035: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-515-2397
Angle Bracket

145152397
3534414801: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-379-3133
Control Rod

143793133
15280: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-513-8054
Mounting Bracket

145138054
DE21794: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-541-8586
Mounting Bracket

145418586
10666959: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-465-7674
Loop Clamp

144657674
52113105011: RNCC: 3 | RNVC: 2
115G11: RNCC: 5 | RNVC: 2
Z00.N7141290005: RNCC: 5 | RNVC: 2
1153101100: RNCC: 5 | RNVC: 2

14 Oct 1993

5340-14-570-8571
Utility Resilient Mount

145708571
RX78900: RNCC: 3 | RNVC: 2

30 Jan 2012

5340-14-517-4796
Runner

145174796
96192935: RNCC: 3 | RNVC: 2

17 Dec 1999

5340-14-466-1755
Mounting Bracket

144661755
162080: RNCC: 3 | RNVC: 2
89169850: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-524-1782
Mounting Plate

145241782
2251234: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-449-9755
Loop Clamp

144499755
2095: RNCC: 3 | RNVC: 2
0216438M00: RNCC: 5 | RNVC: 2

18 Sep 1991

5340-14-300-3219
Split Tubular Clip

143003219
15144647: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-527-4433
Mounting Plate

145274433
V116248: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-552-8836
Mounting Plate

145528836
82034434000: RNCC: 3 | RNVC: 2

10 Feb 2007

5340-14-527-5781
Loop Clamp

145275781
9401GCG2058: RNCC: 3 | RNVC: 2

30 Oct 2001

5340-14-479-3069
Retaining Strap

144793069
0301510560: RNCC: 3 | RNVC: 2

10 Jan 1996

5340-14-535-2558
Mounting Bracket

145352558
6501BRC230: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-261-9280
Retaining Strap

142619280
M124156: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-524-0672
Detent Plunger

145240672
8024685W00: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-14-532-9560
Butt Hinge

145329560
46944676: RNCC: 3 | RNVC: 2

14 Jan 2003

5340-14-548-1804
Mounting Bracket

145481804
69013042: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-14-238-6779
Handwheel

142386779
B0044BB51APL2-2REP18: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-438-4567
Doorstop

144384567
332A22-1384-01: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-366-3089
Mending Plate

143663089
341A21-1013-53: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-14-383-6573
Mounting Plate

143836573
2091-142: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-547-1493
Filler Opening Cap

145471493
A1-002: RNCC: 3 | RNVC: 2

28 Sep 2005

5340-14-526-1948
Mounting Plate

145261948
80-301130: RNCC: 3 | RNVC: 2

9 Jul 2001

5340-14-446-1501
Loop Clamp

144461501
RSGU1-21-20W1: RNCC: 3 | RNVC: 2
91710817: RNCC: 5 | RNVC: 2

6 Mar 1991

5340-14-361-2689
Angle Bracket

143612689
W10261-88: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-514-7231
Mounting Bracket

145147231
TB30-58032-100: RNCC: 3 | RNVC: 2
TB30-58032-100: RNCC: 3 | RNVC: 2

9 Jun 1999

5340-14-304-8774
Retaining Strap

143048774
NO PRIMARY REF14-304-8774: RNCC: 3 | RNVC: 2
151497: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-523-2000
Access Cover

145232000
CCN301-410-413A2: RNCC: 3 | RNVC: 2
CCN301410413A2: RNCC: 5 | RNVC: 2

10 Jan 2001

5340-14-366-5823
Bumper

143665823
055W01-576598F: RNCC: 3 | RNVC: 2
0576598F00: RNCC: 5 | RNVC: 2

20 Nov 1980

5340-14-315-7863
Retaining Strap

143157863
GSM684-003DET7: RNCC: 3 | RNVC: 2
GSM684-03DET7: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-547-9668
Butt Hinge

145479668
234100-233: RNCC: 3 | RNVC: 9

30 Nov 2005

5340-14-448-7878
Rim Lock Set

144487878
897-D-10-00: RNCC: 3 | RNVC: 2
89411273: RNCC: 5 | RNVC: 2
897-D-10-00: RNCC: 5 | RNVC: 9

10 Jul 1991

5340-14-407-7265
Mending Plate

144077265
NO PRIMARY REF14-407-7265: RNCC: 3 | RNVC: 2
90-14-105: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-14-511-9654
Bumper

145119654
NIBS-102J: RNCC: 3 | RNVC: 2
NIBS-102J/PLAN235MSR2D-INDICE D: RNCC: 5 | RNVC: 2

1 Feb 1999

5340-14-439-2343
Mounting Bracket

144392343
332A39-0195-00: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-367-5325
Swivel Caster

143675325
SP4BA125-23R: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-390-4077
Access Cover

143904077
401MA0574F5: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-460-3544
Mounting Plate

144603544
20787588: RNCC: 3 | RNVC: 9

21 Jan 1993

5340-14-489-4355
Angle Bracket

144894355
38512274: RNCC: 3 | RNVC: 2
38512274: RNCC: 5 | RNVC: 9

23 Jul 1997

5340-14-484-3140
Mounting Bracket

144843140
234425: RNCC: 3 | RNVC: 2

7 Nov 1996

5340-14-405-2555
Access Cover

144052555
1260300: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-417-9719
Access Cover

144179719
401101449: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-354-2408
Access Cover

143542408
16321161: RNCC: 3 | RNVC: 2
16321161: RNCC: 5 | RNVC: 9

30 Jan 1979

5340-14-463-3942
Access Cover

144633942
0024000112: RNCC: 3 | RNVC: 2
89296913: RNCC: 5 | RNVC: 2

9 Jun 1993

5340-14-277-7138
Rod End Clevis

142777138
R12608D10AET: RNCC: 2 | RNVC: 2

1 Jan 1971

5340-14-542-1627
Access Cover

145421627
61201071AB: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-14-516-2272
Loop Clamp

145162272
0030163: RNCC: 3 | RNVC: 2

15 Sep 1999

5340-14-525-6580
Rod End Clevis

145256580
20 242 030 9470: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-235-4547
Access Cover

142354547
664123: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-496-7947
Access Cover

144967947
27128592-6: RNCC: 3 | RNVC: 2
F300 0T 022 1200: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-358-3424
Access Cover

143583424
17130: RNCC: 3 | RNVC: 2

13 Aug 1979

5340-14-385-8806
Rod End Connector

143858806
54099: RNCC: 3 | RNVC: 9

24 Aug 1983

5340-14-403-8920
Access Door Hinge

144038920
25090T: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-297-9304
Angle Bracket

142979304
2-13312: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-408-5293
Angle Bracket

144085293
23115565-9: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-487-4981
Mounting Bracket

144874981
25668140: RNCC: 3 | RNVC: 2
2-566814-0: RNCC: 5 | RNVC: 2

10 Apr 1997

5340-14-312-8308
Mounting Bracket

143128308
0249857360: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-377-1785
Access Cover

143771785
191029: RNCC: 3 | RNVC: 2

17 May 1982

5340-14-488-1293
Mounting Bracket

144881293
25666196: RNCC: 3 | RNVC: 2
2-566619-6: RNCC: 5 | RNVC: 2

18 Apr 1997

5340-14-418-3301
Anchor Strap

144183301
4-452718: RNCC: 3 | RNVC: 9
4-452718: RNCC: 5 | RNVC: 2
4-452718: RNCC: 5 | RNVC: 9

12 Aug 1987

5340-14-446-0035
Angle Bracket

144460035
23116868-0: RNCC: 3 | RNVC: 2

4 Mar 1991

5340-14-410-6464
Flush Catch Claw

144106464
BGE401171: RNCC: 3 | RNVC: 2
401171: RNCC: 5 | RNVC: 2

9 Jul 1986

5340-14-432-4774
Clamp Bolt Assembly

144324774
S3SD18123-4: RNCC: 3 | RNVC: 2
S3SD18123-4: RNCC: 5 | RNVC: 2
V3SD18123-4: RNCC: 5 | RNVC: 2

14 Jun 1989

5340-14-224-8851
Bumper

142248851
GSM1674A11-5: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-348-6761
Webbing Strap

143486761
225498REP3: RNCC: 3 | RNVC: 2
225498REP3: RNCC: 5 | RNVC: 9

19 Apr 1978

5340-14-327-1588
Rim Lock Set

143271588
J36-710SRABATF0L10TDR0ITELAIT0N: RNCC: 2 | RNVC: 2
H1DR0ITELAIT0N: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-355-9799
Retaining Strap

143559799
EA1M211-25-114: RNCC: 3 | RNVC: 2

5 Apr 1979

5340-14-475-0774
Mounting Plate

144750774
DM2-3007100: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-14-286-5441
Mending Plate

142865441
FU1542: RNCC: 3 | RNVC: 2
FU1542: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-325-8884
Pawl Fastener

143258884
1187A: RNCC: 3 | RNVC: 2
1187A: RNCC: 5 | RNVC: 9
3513762061: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-457-2626
Mounting Plate

144572626
402243A-SG10137-Z2CND17-12: RNCC: 3 | RNVC: 2

20 Aug 1992

5340-14-479-7629
Mounting Bracket

144797629
312-18505-001: RNCC: 3 | RNVC: 2

5 Feb 1996

5340-14-475-3644
Rim Lock Set

144753644
5823-13GAUCHETIRANT: RNCC: 3 | RNVC: 2
5823CYL-GAUCHETIRANT: RNCC: 5 | RNVC: 2

31 Mar 1995

5340-14-411-1390
Rod End Connector

144111390
SK30019-70: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-431-2657
Rod End Clevis

144312657
3160S22-01-708: RNCC: 3 | RNVC: 2

12 Apr 1989

5340-14-485-9137
Access Cover

144859137
332A61-3167-00: RNCC: 3 | RNVC: 2

19 Feb 1997

5340-14-396-2085
Anchor Strap

143962085
T20-13J131: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-547-8748
Snap Hook

145478748
4030T/030/206: RNCC: 3 | RNVC: 2

21 Nov 2005

5340-14-514-9969
Mounting Plate

145149969
SA/CS31/20: RNCC: 3 | RNVC: 2

25 Jun 1999

5340-14-533-4945
Mounting Bracket

145334945
S41-201: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-375-7898
Anchor Strap

143757898
0000726065: RNCC: 3 | RNVC: 2
0000486285: RNCC: 5 | RNVC: 2
486285: RNCC: 5 | RNVC: 9

26 Feb 1982

5340-14-462-8099
Access Cover

144628099
29462502: RNCC: 3 | RNVC: 2

3 May 1993

5340-14-322-0703
Retaining Strap

143220703
83392: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-520-0897
Access Cover

145200897
3K99-437: RNCC: 3 | RNVC: 2

10 May 2000

5340-14-461-1649
Angle Bracket

144611649
4772820070: RNCC: 3 | RNVC: 2
5046063: RNCC: 5 | RNVC: 9

24 Feb 1993

5340-14-489-4292
Access Cover

144894292
45674007: RNCC: 3 | RNVC: 2
45674007: RNCC: 5 | RNVC: 9

22 Jul 1997

5340-14-341-7597
Access Cover

143417597
1683A105: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-520-7840
Mounting Bracket

145207840
0019600908: RNCC: 3 | RNVC: 2

14 Jun 2000

5340-14-351-0332
Retaining Strap

143510332
TH20K1107: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-383-4086
Mending Plate

143834086
391202: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-449-3112
Synchro Clamp

144493112
516A105: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-438-8169
Bumper

144388169
TB1030411: RNCC: 3 | RNVC: 2

9 Apr 1990

5340-14-257-6501
Access Cover

142576501
77873: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-382-5220
Access Cover

143825220
16764451: RNCC: 3 | RNVC: 2
16764451: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-519-4503
Utility Access Door

145194503
S1486085: RNCC: 3 | RNVC: 2

20 Mar 2000

5340-14-472-3540
Access Cover

144723540
1039242Y01: RNCC: 3 | RNVC: 2

19 Oct 1994

5340-14-424-4403
Mounting Plate

144244403
79117538: RNCC: 3 | RNVC: 2
79117538: RNCC: 5 | RNVC: 9

19 May 1988

5340-14-370-0184
Access Cover

143700184
0235700190: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-361-8707
Locking Stay

143618707
2187-250B513: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-320-3078
Access Cover

143203078
0074810040: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-369-9478
Access Cover

143699478
398102040002: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-250-7755
Rod End Clevis

142507755
0383770: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-505-0115
Access Cover

145050115
5000739899: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-313-7053
Access Cover

143137053
0064767260: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-455-5615
Angle Bracket

144555615
5010054955: RNCC: 3 | RNVC: 2

28 May 1992

5340-14-358-1966
Access Cover

143581966
0000150620: RNCC: 3 | RNVC: 2
0000150620: RNCC: 5 | RNVC: 9
150620: RNCC: 5 | RNVC: 9

13 Aug 1979

5340-14-483-9724
Access Cover

144839724
1105223Q00: RNCC: 3 | RNVC: 2

12 Oct 1996

5340-14-315-3799
Access Cover

143153799
107017: RNCC: 3 | RNVC: 2
107017: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-441-3718
Rod End Clevis

144413718
PM1A248020400: RNCC: 3 | RNVC: 2
PM1A248020400: RNCC: 5 | RNVC: 2

22 Aug 1990

5340-14-369-0682
Access Cover

143690682
7028P: RNCC: 3 | RNVC: 9
7028: RNCC: 5 | RNVC: 9
7028: RNCC: 5 | RNVC: 9

17 Apr 1981

5340-14-488-2174
Access Cover

144882174
29728210: RNCC: 3 | RNVC: 2
29728210: RNCC: 3 | RNVC: 9

23 Apr 1997

5340-14-547-4428
Access Cover

145474428
5010575000: RNCC: 3 | RNVC: 2

13 Oct 2005

5340-14-478-3227
Access Cover

144783227
45274128: RNCC: 3 | RNVC: 2
45274128: RNCC: 3 | RNVC: 9

25 Oct 1995

5340-14-466-3090
Access Cover

144663090
39456558: RNCC: 3 | RNVC: 2
39456558: RNCC: 3 | RNVC: 9

3 Nov 1993

5340-14-396-4240
Locking Stay

143964240
50052781: RNCC: 3 | RNVC: 2
50052781: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-314-6447
Access Cover

143146447
0172097020: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-532-2301
Access Cover

145322301
8042617Q00: RNCC: 3 | RNVC: 2

22 Oct 2002

5340-14-544-8114
Caster Frame

145448114
8048003C00: RNCC: 3 | RNVC: 2

24 Feb 2005

5340-14-507-0692
Access Cover

145070692
3CGF311S1: RNCC: 3 | RNVC: 2

9 Jun 1998

5340-14-507-2739
Access Cover

145072739
MBEU60908: RNCC: 3 | RNVC: 2

24 Jun 1998

5340-14-464-8985
Access Cover

144648985
3428564: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-442-1113
Mounting Bracket

144421113
005062010181: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-14-479-8538
Mounting Bracket

144798538
T1083AA24: RNCC: 3 | RNVC: 2
416278: RNCC: 5 | RNVC: 9
T1083AA24: RNCC: 5 | RNVC: 9

7 Feb 1996

5340-14-552-8853
Rod End Clevis

145528853
82072925000: RNCC: 3 | RNVC: 2

10 Feb 2007

5340-14-413-9060
Retaining Strap

144139060
191799: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-418-1005
Anchor Strap

144181005
131755N2: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-345-1359
Rod End Clevis

143451359
1051020010: RNCC: 3 | RNVC: 2
1051020010: RNCC: 5 | RNVC: 2

5 Oct 1977

5340-14-394-8879
Bumper

143948879
403869: RNCC: 3 | RNVC: 2
403869: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-482-0867
Access Cover

144820867
72153: RNCC: 3 | RNVC: 2

20 Jun 1996

5340-14-465-0204
Anchor Strap

144650204
MB1446F00: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-277-7952
Access Cover

142777952
12503889: RNCC: 3 | RNVC: 2
12503889: RNCC: 3 | RNVC: 9

1 Jan 1971

5340-14-420-6648
Anchor Strap

144206648
ST406M74P11: RNCC: 3 | RNVC: 2

16 Dec 1987

5340-14-406-0398
Rod End Clevis

144060398
M4Z5180908920: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-433-4445
Anchor Strap

144334445
11049: RNCC: 3 | RNVC: 2

26 Jul 1989

Load More Results