What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 130 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 130 of 446

5340-14-404-3464
Rod End Clevis

144043464
A01920-02-2000P004: RNCC: 3 | RNVC: 2

30 Oct 1985

5340-14-408-7300
Rod End Clevis

144087300
M3R773-91-03: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-457-2500
Pipe Hanger

144572500
402216A-SG10137-Z2CND17-12: RNCC: 3 | RNVC: 2

20 Aug 1992

5340-14-409-3623
Anchor Strap

144093623
NO PRIMARY REF14-409-3623: RNCC: 3 | RNVC: 2
5000243027: RNCC: 5 | RNVC: 2
095192J: RNCC: 5 | RNVC: 9

28 May 1986

5340-14-554-9939
Rod End Clevis

145549939
419990: RNCC: 3 | RNVC: 2
201-136DZ-G1: RNCC: 5 | RNVC: 2

17 Sep 2007

5340-14-450-1693
Mounting Bracket

144501693
92PD260107: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-460-0862
Angle Bracket

144600862
PM1A610037570: RNCC: 3 | RNVC: 2
PM1A610037570: RNCC: 5 | RNVC: 2

7 Jan 1993

5340-14-429-9701
Bumper

144299701
L1001E6: RNCC: 3 | RNVC: 2
000200267200: RNCC: 5 | RNVC: 2

21 Feb 1989

5340-14-430-0631
Bumper

144300631
337946: RNCC: 3 | RNVC: 2
337946: RNCC: 5 | RNVC: 9

28 Feb 1989

5340-14-349-9555
Detent Plunger

143499555
22349068: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-518-0722
Mounting Plate

145180722
5010117855: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-548-9031
Mounting Bracket

145489031
82140058000: RNCC: 3 | RNVC: 2

22 Feb 2006

5340-14-549-1026
Section Block Clamp

145491026
RA1M703754145A2: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-517-4055
Mounting Plate

145174055
803481130112: RNCC: 3 | RNVC: 2
SDM803481130112: RNCC: 5 | RNVC: 9

8 Dec 1999

5340-14-518-1592
Loop Clamp

145181592
5010057390: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-526-9561
Mounting Bracket

145269561
10606071: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-206-3282
Lock-Release Lever

142063282
301927: RNCC: 3 | RNVC: 2
590084: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-465-2017
Bumper

144652017
0C07524152: RNCC: 3 | RNVC: 2
0C07524152: RNCC: 5 | RNVC: 2
5010054629: RNCC: 5 | RNVC: 2
5010146459: RNCC: 5 | RNVC: 2

15 Sep 1993

5340-14-343-6805
Retaining Strap

143436805
ST406M52P507: RNCC: 3 | RNVC: 2

13 Jul 1977

5340-14-354-7751
Detent Plunger

143547751
61469: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-414-5491
Access Cover

144145491
TH20C502: RNCC: 3 | RNVC: 2

11 Feb 1987

5340-14-372-2905
Anchor Strap

143722905
120600195: RNCC: 3 | RNVC: 9

1 Sep 1981

5340-14-457-6592
Webbing Strap

144576592
A1500-CAT2-LG3,5M: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-466-2730
Access Cover

144662730
45084546: RNCC: 3 | RNVC: 2
45084546: RNCC: 3 | RNVC: 9

3 Nov 1993

5340-14-528-1395
Mounting Bracket

145281395
3526AA01312: RNCC: 3 | RNVC: 2

20 Dec 2001

5340-14-355-1158
Mending Plate

143551158
525637: RNCC: 3 | RNVC: 2
00525637: RNCC: 5 | RNVC: 2

19 Mar 1979

5340-14-386-5113
Rod End Clevis

143865113
9037: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-539-5027
Access Cover

145395027
MECZ8054: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-14-533-4791
Hand Crank Arm

145334791
720008: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-441-9159
Access Cover

144419159
D05910106: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-460-3155
Mounting Bracket

144603155
45215555: RNCC: 3 | RNVC: 2
45215555: RNCC: 5 | RNVC: 9

21 Jan 1993

5340-14-527-2649
Utility Access Door

145272649
94GR14: RNCC: 3 | RNVC: 2

17 Oct 2001

5340-14-481-0932
Cover Strip

144810932
RA1M256200512N1: RNCC: 3 | RNVC: 2

18 Apr 1996

5340-14-402-0403
Anchor Strap

144020403
217164: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-438-4174
Access Cover

144384174
38805: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-473-1060
Angle Bracket

144731060
38512736: RNCC: 3 | RNVC: 2
38512736: RNCC: 5 | RNVC: 9

7 Dec 1994

5340-14-550-3905
Loop Clamp

145503905
4095: RNCC: 3 | RNVC: 2

19 Jun 2006

5340-14-422-4121
Access Cover

144224121
564090G0006: RNCC: 3 | RNVC: 2

3 Mar 1988

5340-14-530-5293
Rod End Clevis

145305293
B001800286: RNCC: 3 | RNVC: 2

18 Jun 2002

5340-14-341-7968
Retaining Strap

143417968
CAPY4ES: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-349-2467
Tubular Fairlead

143492467
813857REP1: RNCC: 3 | RNVC: 2
813857REP1: RNCC: 5 | RNVC: 9

22 May 1978

5340-14-466-2820
Mounting Bracket

144662820
10227980: RNCC: 3 | RNVC: 2

3 Nov 1993

5340-14-240-6503
Access Cover

142406503
70663709: RNCC: 3 | RNVC: 2
70663709: RNCC: 5 | RNVC: 9
M288039: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-552-9557
Access Cover

145529557
606463: RNCC: 3 | RNVC: 2

19 Feb 2007

5340-14-551-2899
Angle Bracket

145512899
RA1M702506039: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-385-3919
Access Cover

143853919
0308107650: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-486-5239
Mounting Bracket

144865239
1-4423-253: RNCC: 3 | RNVC: 2

21 Mar 1997

5340-14-475-3483
Bumper

144753483
906-1-40-027: RNCC: 3 | RNVC: 2

29 Mar 1995

5340-14-312-2486
Loop Clamp

143122486
53286-3-16: RNCC: 3 | RNVC: 2
0400466160: RNCC: 5 | RNVC: 2
9560110410: RNCC: 5 | RNVC: 2
53286-3-16: RNCC: 5 | RNVC: 9
P53286-3-16: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-518-2115
Pipe Hanger

145182115
307-848-405-0: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-327-9582
Rod End Clevis

143279582
880-76-0-034-0: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-520-8808
Butt Hinge

145208808
85-7-1066: RNCC: 3 | RNVC: 2

21 Jun 2000

5340-14-301-4873
Loop Clamp

143014873
915-1-41-07: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-433-6266
Mounting Bracket

144336266
6232-58501: RNCC: 3 | RNVC: 2

2 Aug 1989

5340-14-286-5123
Retaining Strap

142865123
341A21-1033-20: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-468-1768
Angle Bracket

144681768
78704-30-050: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-346-7196
Retaining Strap

143467196
414-10135-000: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-325-2768
Retaining Band

143252768
30032: RNCC: 3 | RNVC: 2
30032: RNCC: 5 | RNVC: 9
85-686-7956: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-477-9998
Loop Clamp

144779998
650-403-010-0: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-14-381-1359
Strap Fastener Loop

143811359
11630-160-055: RNCC: 3 | RNVC: 2
A1630-160-055: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-284-6923
Angle Bracket

142846923
121E23-078-04-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-290-8419
Rod End Clevis

142908419
B35120-2-12BCL: RNCC: 3 | RNVC: 2
01902-8-938: RNCC: 5 | RNVC: 2
85-662-1410: RNCC: 6 | RNVC: 9

1 Jan 1972

5340-14-427-5742
Loop Clamp

144275742
320-136-701-0: RNCC: 3 | RNVC: 2

20 Oct 1988

5340-14-314-6724
Butt Hinge

143146724
54-1-016C: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-383-3256
Handwheel

143833256
627 347: RNCC: 3 | RNVC: 2
627-220: RNCC: 5 | RNVC: 2
147958-2: RNCC: 5 | RNVC: 2

11 Apr 1983

5340-14-494-3981
Mounting Bracket

144943981
EL62-1-0300: RNCC: 3 | RNVC: 2
F300 0T 017 2358: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-419-7045
Access Cover

144197045
M363-03580: RNCC: 3 | RNVC: 2

5 Nov 1987

5340-14-531-1722
Flush Catch Claw

145311722
433382-001: RNCC: 3 | RNVC: 2

29 Jul 2002

5340-14-314-7612
Quick Release Pin

143147612
NO PRIMARY REF14-314-7612: RNCC: 3 | RNVC: 2
38120: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-443-5163
Mounting Plate

144435163
CAP230-70-17-00: RNCC: 3 | RNVC: 9

27 Nov 1990

5340-14-553-2464
Mounting Plate

145532464
350A53-1049-20: RNCC: 3 | RNVC: 2

19 Mar 2007

5340-14-361-2424
Retaining Strap

143612424
C28271-85: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-502-3621
Mounting Bracket

145023621
0390710480: RNCC: 3 | RNVC: 2

9 Dec 1997

5340-14-501-6016
Angle Bracket

145016016
45595066: RNCC: 3 | RNVC: 2
45595066: RNCC: 5 | RNVC: 9
F300 0T 025 0283: RNCC: 6 | RNVC: 9

5 Nov 1997

5340-14-465-3002
Mounting Bracket

144653002
365A81-0369-21: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-478-5914
Clamping Catch

144785914
G0P506ZI: RNCC: 3 | RNVC: 2

8 Nov 1995

5340-14-441-4339
Butt Hinge

144414339
PM1A125810042U1: RNCC: 3 | RNVC: 2
PM1A125810042U1: RNCC: 5 | RNVC: 2

22 Aug 1990

5340-14-473-9260
Synchro Clamp

144739260
45024162: RNCC: 3 | RNVC: 2
45024162: RNCC: 3 | RNVC: 9

18 Jan 1995

5340-14-545-6998
Mounting Bracket

145456998
RA1M703576311N1: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-277-1560
Angle Bracket

142771560
9132136: RNCC: 3 | RNVC: 2
9132136: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-542-6360
Mounting Bracket

145426360
S718A4001206: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-14-474-2984
Angle Bracket

144742984
45086471: RNCC: 3 | RNVC: 2

8 Feb 1995

5340-14-509-1521
Loop Clamp

145091521
ER3206: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-285-1315
Pipe Hanger

142851315
271629: RNCC: 3 | RNVC: 2
271629: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-405-2861
Angle Bracket

144052861
526602000: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-513-5338
Angle Bracket

145135338
5622836N00: RNCC: 3 | RNVC: 2
5622836N00: RNCC: 5 | RNVC: 2

24 Mar 1999

5340-14-531-6953
Mounting Bracket

145316953
10472114: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-14-539-4365
Mounting Bracket

145394365
46248336: RNCC: 3 | RNVC: 2

14 Jan 2004

5340-14-501-4096
Cover Strip

145014096
DA2C283400075: RNCC: 3 | RNVC: 2

29 Oct 1997

5340-14-431-9082
Mounting Plate

144319082
PL1BV3010X890075: RNCC: 3 | RNVC: 2

10 May 1989

5340-14-550-9069
Mounting Plate

145509069
RA1B702202381N1: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-516-9423
Pipe Hanger

145169423
T212A5001110: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-468-0761
Mounting Bracket

144680761
ALZ008055011302: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-356-5610
Loop Clamp

143565610
TLH0TM114: RNCC: 3 | RNVC: 2

15 May 1979

5340-14-383-3661
Webbing Strap

143833661
4770216470: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-454-0469
Retaining Strap

144540469
BLC236942: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-14-455-8655
Angle Bracket

144558655
T441AA25: RNCC: 3 | RNVC: 2
T441AA25: RNCC: 5 | RNVC: 9
5045843: RNCC: 5 | RNVC: 9

11 Jun 1992

5340-14-357-4734
Angle Bracket

143574734
A11A231474471: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-489-9739
Mounting Bracket

144899739
10363400: RNCC: 3 | RNVC: 2

3 Sep 1997

5340-14-475-1742
Loop Clamp

144751742
51311706022: RNCC: 3 | RNVC: 2
574840: RNCC: 5 | RNVC: 2

22 Mar 1995

5340-14-553-6885
Mounting Bracket

145536885
82183684000: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-555-2439
Mounting Bracket

145552439
CLACA40: RNCC: 3 | RNVC: 2

16 Oct 2007

5340-14-383-2020
Mending Plate

143832020
0PHD50-629952K: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-544-7968
Bumper

145447968
56697300: RNCC: 3 | RNVC: 2

24 Feb 2005

5340-14-396-1638
Runner

143961638
NO PRIMARY REF14-396-1638: RNCC: 3 | RNVC: 2
P9H004768-00: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-411-7479
Anchor Strap

144117479
17821: RNCC: 3 | RNVC: 2
4-17821: RNCC: 5 | RNVC: 2

27 Aug 1986

5340-14-354-3922
Angle Bracket

143543922
21312559: RNCC: 3 | RNVC: 2
21312559-8: RNCC: 5 | RNVC: 2

31 Jan 1979

5340-14-362-1062
Bumper

143621062
B0013-053F8: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-262-4836
Mounting Bracket

142624836
321A67-5215-00: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-316-4620
Loop Clamp

143164620
2200032: RNCC: 3 | RNVC: 2
BN418-501F11B1: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-374-9935
Mending Plate

143749935
14629: RNCC: 3 | RNVC: 2
85-692-0564: RNCC: 6 | RNVC: 9

30 Jan 1982

5340-14-465-5043
Access Cover

144655043
365A81-0063-00: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-472-8684
Detent Plunger

144728684
332A22-1397-20: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-415-3098
Pipe Hanger

144153098
ST08-00-28F4-8DN100: RNCC: 3 | RNVC: 2
33061: RNCC: 5 | RNVC: 9
ST08-00-28F4-8DN100: RNCC: 5 | RNVC: 9

29 Apr 1987

5340-14-468-4790
Threaded Rod End

144684790
A1-73075: RNCC: 3 | RNVC: 2

3 Mar 1994

5340-14-391-0601
Runner

143910601
NO PRIMARY REF14-391-0601: RNCC: 3 | RNVC: 2
D20-23608: RNCC: 5 | RNVC: 9

1 Mar 1984

5340-14-349-5064
Bow Handle

143495064
ET0008-77: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-375-9257
Mending Plate

143759257
11-703-600: RNCC: 3 | RNVC: 2
11-703-600: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-264-1694
Loop Clamp

142641694
55217-306ADL: RNCC: 3 | RNVC: 2
55217-306-000ADL: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-326-7450
Handwheel

143267450
NO PRIMARY REF14-326-7450: RNCC: 3 | RNVC: 2
3R100221PT: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-468-0922
Lock Key

144680922
3809010: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-543-1996
Mounting Bracket

145431996
AA001592: RNCC: 3 | RNVC: 2
309 33: RNCC: 5 | RNVC: 2
30933: RNCC: 5 | RNVC: 2

31 Aug 2004

5340-14-443-1422
Bumper

144431422
DA2C228547771: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-14-500-8237
Mounting Plate

145008237
E64009998135: RNCC: 3 | RNVC: 2
F300 0T 024 8439: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-527-4066
Retaining Strap

145274066
P106012V: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-474-8523
Retaining Band

144748523
8X0-8X75MMXC18S: RNCC: 3 | RNVC: 2

8 Mar 1995

5340-14-502-0366
Clamping Catch

145020366
GR63IA: RNCC: 3 | RNVC: 2
K0070806: RNCC: 5 | RNVC: 2
91723577: RNCC: 5 | RNVC: 2

26 Nov 1997

5340-14-378-9627
Retaining Strap

143789627
4136K9: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-519-4607
Mounting Bracket

145194607
101160111520: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-486-0135
Synchro Clamp

144860135
PM1A761142153: RNCC: 3 | RNVC: 2
PM1A761142153: RNCC: 5 | RNVC: 2

26 Feb 1997

5340-14-282-8643
Retaining Strap

142828643
08326: RNCC: 3 | RNVC: 2
8326: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-202-1765
Angle Bracket

142021765
10062AF: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-281-2137
Retaining Strap

142812137
202672: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-525-8391
Angle Bracket

145258391
G135273: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-481-2603
Runner

144812603
10032249: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-14-449-8087
Loop Clamp

144498087
4075: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-14-482-6807
Angle Bracket

144826807
47029652: RNCC: 3 | RNVC: 2

18 Jul 1996

5340-14-539-5657
Mounting Bracket

145395657
10642781: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-448-1840
Loop Clamp

144481840
SP414PPRDPAS: RNCC: 3 | RNVC: 2
RAR3481: RNCC: 5 | RNVC: 2
RI SP414PPDPAS: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-457-7565
Bumper

144577565
T895AA21: RNCC: 3 | RNVC: 2
5045936: RNCC: 5 | RNVC: 9
T895AA21: RNCC: 5 | RNVC: 9

17 Sep 1992

5340-14-308-1498
Retaining Strap

143081498
C48063: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-504-6300
Angle Bracket

145046300
F00164835: RNCC: 3 | RNVC: 2
F00164835: RNCC: 5 | RNVC: 9

25 Feb 1998

5340-14-385-4193
Mending Plate

143854193
0285320140: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-529-9620
Extension Handle

145299620
8004207B00: RNCC: 3 | RNVC: 2

24 Apr 2002

5340-14-227-9854
Mounting Plate

142279854
644C115: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-501-0667
Mounting Bracket

145010667
11410: RNCC: 3 | RNVC: 9
F300 0T 025 0999: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-507-0753
Access Cover

145070753
1086382A00: RNCC: 3 | RNVC: 2

10 Jun 1998

5340-14-519-2459
Access Cover

145192459
FGFB910018A1: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-228-0429
Access Cover

142280429
0067050160: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-414-0083
Access Cover

144140083
237978: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-514-0662
Retaining Strap

145140662
RA1M704734541: RNCC: 3 | RNVC: 2

22 Apr 1999

5340-14-358-2991
Access Cover

143582991
84548: RNCC: 3 | RNVC: 2
7701009220: RNCC: 5 | RNVC: 2

13 Aug 1979

5340-14-502-6975
Plug Button

145026975
1067989: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-546-9799
Access Cover

145469799
F1403812: RNCC: 3 | RNVC: 2

12 Sep 2005

5340-14-514-0307
Door Handle

145140307
PZACA21: RNCC: 3 | RNVC: 2
F64110545: RNCC: 5 | RNVC: 9

22 Apr 1999

5340-14-444-4808
Anchor Strap

144444808
123020403: RNCC: 3 | RNVC: 9

14 Jan 1991

5340-14-420-0614
Plug Button

144200614
4155929: RNCC: 3 | RNVC: 2
4155929: RNCC: 5 | RNVC: 9

18 Nov 1987

5340-14-555-7415
Utility Access Door

145557415
19227908: RNCC: 3 | RNVC: 2

11 Dec 2007

5340-14-518-5800
Access Cover

145185800
5001825404: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-550-3417
Access Cover

145503417
2716172140: RNCC: 3 | RNVC: 2

16 Jun 2006

5340-14-364-6098
Access Cover

143646098
5000495652: RNCC: 3 | RNVC: 2
5000495652: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-390-4435
Door Closer

143904435
388296CHAMPAGNE: RNCC: 3 | RNVC: 2
HL100N2CHAMPAGNE: RNCC: 3 | RNVC: 2
RAB5848: RNCC: 5 | RNVC: 2

26 Jan 1984

5340-14-551-3068
Access Cover

145513068
1501027: RNCC: 3 | RNVC: 2
1501027: RNCC: 5 | RNVC: 2

11 Sep 2006

5340-14-253-8540
Utility Access Door

142538540
24501826400: RNCC: 3 | RNVC: 2
101J264: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-516-4439
Utility Access Door

145164439
0020360: RNCC: 3 | RNVC: 2

24 Sep 1999

5340-14-452-3706
Block Clamp

144523706
321115560001: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-382-9792
Anchor Strap

143829792
237320: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-313-0704
Access Cover

143130704
0064760150: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-316-2713
Access Cover

143162713
0257987040: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-444-7550
Access Cover

144447550
2400161: RNCC: 3 | RNVC: 2
N110360: RNCC: 5 | RNVC: 2
494507: RNCC: 5 | RNVC: 2

21 Jan 1991

5340-14-478-2853
Access Cover

144782853
H321AZ14: RNCC: 3 | RNVC: 2

19 Oct 1995

5340-14-349-2910
Access Cover

143492910
1047407: RNCC: 3 | RNVC: 2
1047407: RNCC: 5 | RNVC: 2

22 May 1978

5340-14-435-6931
Access Cover

144356931
TS110561: RNCC: 3 | RNVC: 2

20 Nov 1989

5340-14-032-1084
Anchor Strap

140321084
A11A722151012: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-516-9342
Access Cover

145169342
T212A2001118: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-528-2326
Plug Button

145282326
31145032: RNCC: 3 | RNVC: 9
SYQ2345: RNCC: 5 | RNVC: 2

14 Jan 2002

5340-14-537-1189
Access Cover

145371189
1003427: RNCC: 3 | RNVC: 2

1 Oct 2003

5340-14-511-9367
Corner Brace

145119367
25549: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-14-461-9845
Loop Clamp

144619845
T700A7920006100: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-399-9700
Retaining Strap

143999700
231662: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-518-9936
Mounting Plate

145189936
707468: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-395-6191
Retaining Strap

143956191
251100: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-551-2657
Retaining Strap

145512657
R47045: RNCC: 3 | RNVC: 2
R47045: RNCC: 5 | RNVC: 2

7 Sep 2006

5340-14-497-9015
Mounting Bracket

144979015
0315777340: RNCC: 3 | RNVC: 2

22 Oct 1997

5340-14-551-2862
Mounting Bracket

145512862
RA1A702606059N1: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-527-4428
Mounting Plate

145274428
V116142: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-506-5798
Angle Bracket

145065798
NNP5340838309103: RNCC: 3 | RNVC: 9

29 Apr 1998

5340-14-352-4429
Bumper

143524429
262-20-81363-01: RNCC: 3 | RNVC: 2
85-689-4766: RNCC: 6 | RNVC: 9

16 Oct 1978

5340-14-372-3571
Rod End Clevis

143723571
21C5077: RNCC: 3 | RNVC: 2
N102E151-04-34: RNCC: 5 | RNVC: 2

1 Sep 1981

5340-14-488-1289
Retaining Strap

144881289
25655693: RNCC: 3 | RNVC: 2
2-565569-3: RNCC: 5 | RNVC: 2

18 Apr 1997

5340-14-316-5117
Rod End Clevis

143165117
321A08-0513-20: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-555-2200
Pipe Hanger

145552200
78731-041-100: RNCC: 3 | RNVC: 2

10 Oct 2007

5340-14-389-1129
Angle Bracket

143891129
366A25-0032-2701: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-542-0630
Mounting Bracket

145420630
3830558-801: RNCC: 3 | RNVC: 2
502118015015A: RNCC: 3 | RNVC: 9
383 0558-801: RNCC: 5 | RNVC: 2

2 Jul 2004

5340-14-475-2118
Pipe Hanger

144752118
F706-60: RNCC: 3 | RNVC: 2

22 Mar 1995

5340-14-346-2032
Access Cover

143462032
AM436-91: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-390-8882
Rod End Clevis

143908882
ST159-2M112-2P34: RNCC: 3 | RNVC: 2
J05087-112-2000P034: RNCC: 5 | RNVC: 2

1 Mar 1984

5340-14-341-1781
Loop Clamp

143411781
M3E704-535: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-520-4470
Mounting Bracket

145204470
M45AA0101-824: RNCC: 3 | RNVC: 2
M45AA0101-824: RNCC: 5 | RNVC: 9

17 May 2000

5340-14-411-2580
Loop Clamp

144112580
ASNA0021-25SE05: RNCC: 3 | RNVC: 2
A0021-25SE05: RNCC: 5 | RNVC: 2

6 Aug 1986

5340-14-378-5443
Retaining Strap

143785443
121E27-391-21-0: RNCC: 3 | RNVC: 2
121E27-391-21-0: RNCC: 5 | RNVC: 2

11 Aug 1982

5340-14-281-2496
Turnbuckle Body

142812496
121A26-721-05-0: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-389-5466
Angle Bracket

143895466
365A87-3034-56: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-555-3846
Webbing Strap

145553846
19228237: RNCC: 3 | RNVC: 2

6 Nov 2007

5340-14-522-3207
Mounting Plate

145223207
10470162: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-14-383-1559
Clamping Catch

143831559
3343669: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-505-3972
Synchro Clamp

145053972
12017015: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-503-5902
Runner

145035902
45610447: RNCC: 3 | RNVC: 2

21 Jan 1998

5340-14-292-7709
Recess Handle

142927709
7345RMCACNI: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-554-8852
Loop Clamp

145548852
78651RH27CP: RNCC: 1 | RNVC: 2
78651RH27CP: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-334-8765
Bumper

143348765
F10A211200123: RNCC: 3 | RNVC: 2

2 Jun 1976

5340-14-515-2994
Retaining Clip

145152994
0009251204: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-385-7450
Utility Access Door

143857450
236056: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-518-0361
Bow Handle

145180361
200919: RNCC: 3 | RNVC: 2
5000815048: RNCC: 5 | RNVC: 2
ENSEMBLE E290: RNCC: 5 | RNVC: 2
OTA200919: RNCC: 5 | RNVC: 9

21 Jan 2000

5340-14-307-1080
Webbing Strap

143071080
K1092: RNCC: 3 | RNVC: 9

1 Jan 1974

5340-14-533-8595
Cover Strip

145338595
10-250-368: RNCC: 3 | RNVC: 2
Z210.250.368: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-320-4432
Angle Bracket

143204432
0000448900: RNCC: 3 | RNVC: 2
0000448900: RNCC: 5 | RNVC: 9
448900: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-551-3070
Mounting Bracket

145513070
1501030: RNCC: 3 | RNVC: 2
1501030: RNCC: 5 | RNVC: 2

11 Sep 2006

5340-14-468-7290
Loop Clamp

144687290
52313105015: RNCC: 3 | RNVC: 2
111G15: RNCC: 5 | RNVC: 2

16 Mar 1994

5340-14-399-7488
Rod End Clevis

143997488
M4Z7101901320: RNCC: 3 | RNVC: 2

14 Mar 1985

5340-14-517-9218
Bow Handle

145179218
PM1A711270031A2: RNCC: 3 | RNVC: 2
PM1A711270031A2: RNCC: 5 | RNVC: 2

18 Jan 2000

5340-14-402-0431
Retaining Strap

144020431
219850: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-260-3673
Cover Strip

142603673
3160S25-25-042: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-437-9506
Blank Panel

144379506
330A61-7660-24: RNCC: 3 | RNVC: 2

28 Feb 1990

5340-14-450-7712
Rim Lock Set

144507712
4712487-10: RNCC: 3 | RNVC: 2
4712487-10: RNCC: 3 | RNVC: 9

23 Oct 1991

5340-14-521-9326
Loop Clamp

145219326
CFCD1-12-20: RNCC: 3 | RNVC: 2
RSGU100-11-20: RNCC: 5 | RNVC: 9
RSGU1100-11-20: RNCC: 5 | RNVC: 9

27 Sep 2000

5340-14-509-8773
Loop Clamp

145098773
502-515-093-0: RNCC: 3 | RNVC: 2
5340AA1079701: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-232-1748
Angle Bracket

142321748
LFP54-217: RNCC: 3 | RNVC: 2
LFP54-217: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-524-9318
Mounting Bracket

145249318
452-14571-000: RNCC: 3 | RNVC: 2
452-14571-000: RNCC: 5 | RNVC: 9

3 May 2001

5340-14-529-5779
Mounting Plate

145295779
330A87-3821-20: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-508-9710
Mounting Plate

145089710
NO PRIMARY REF14-508-9710: RNCC: 3 | RNVC: 2
851886M0D: RNCC: 5 | RNVC: 2

12 Oct 1998

5340-14-293-5145
Bow Handle

142935145
NO PRIMARY REF14-293-5145: RNCC: 3 | RNVC: 2
SMC1636: RNCC: 5 | RNVC: 2
12114: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-032-0970
Access Cover

140320970
341A96-5505-22: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-549-8722
Mounting Bracket

145498722
2093197-001: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-349-8729
Rod End Clevis

143498729
TH20INS7-217: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-572-8394
Utility Resilient Mount

145728394
E1N-3455-52: RNCC: 3 | RNVC: 2

9 Aug 2012

5340-14-303-4319
Access Cover

143034319
170357: RNCC: 3 | RNVC: 2
20-0431: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-348-1102
Rod End Clevis

143481102
C85-58000: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-378-8644
Webbing Strap

143788644
000052: RNCC: 3 | RNVC: 2
000052: RNCC: 5 | RNVC: 9
HO-213A: RNCC: 6 | RNVC: 9

6 Sep 1982

5340-14-286-5078
Angle Bracket

142865078
341A25-1200-21: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-224-0223
Handwheel

142240223
GSM137-001F18DET8SANSB0ULEAS10G: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-370-8868
Access Cover

143708868
6801R31-1001-21: RNCC: 3 | RNVC: 2
6801366A31-1001-21: RNCC: 5 | RNVC: 2

21 Mar 1996

5340-14-359-8356
Pipe Hanger

143598356
F704-22820: RNCC: 3 | RNVC: 2

15 Oct 1979

5340-14-399-9460
Angle Bracket

143999460
D20-33987: RNCC: 3 | RNVC: 2
33987: RNCC: 5 | RNVC: 9
D20-33987: RNCC: 5 | RNVC: 9

24 Apr 1985

5340-14-399-8416
Access Cover

143998416
41-9989: RNCC: 3 | RNVC: 2
41-9989: RNCC: 5 | RNVC: 9

26 Mar 1985

5340-14-313-1698
Bow Handle

143131698
M101504: RNCC: 3 | RNVC: 2
M101504: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-507-7818
Mounting Bracket

145077818
220957: RNCC: 3 | RNVC: 2
91772749: RNCC: 5 | RNVC: 2
91772749: RNCC: 5 | RNVC: 2

12 Aug 1998

5340-14-312-0836
Loop Clamp

143120836
164014: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-309-0261
Recess Handle

143090261
1091-51: RNCC: 3 | RNVC: 2
1091-51: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-470-3344
Mounting Bracket

144703344
203421: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-14-512-5741
Bridge Clamp

145125741
3BM01668AAAA: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-497-2922
Runner

144972922
63852: RNCC: 3 | RNVC: 2
F300 0T 022 9588: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-474-8820
Mounting Bracket

144748820
567500: RNCC: 3 | RNVC: 2

8 Mar 1995

5340-14-542-5381
Mounting Bracket

145425381
02120069: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-14-382-5358
Mounting Plate

143825358
16932328: RNCC: 3 | RNVC: 2
16932328: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-539-5022
Mounting Plate

145395022
MECZ7367: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-14-289-4431
Retaining Strap

142894431
C53965: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-538-2233
Loop Clamp

145382233
NGM0010033010953: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-366-8174
Leaf Spring

143668174
970416: RNCC: 3 | RNVC: 2
970416: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-518-9714
Mounting Bracket

145189714
707052: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-456-6006
Mounting Bracket

144566006
77020: RNCC: 3 | RNVC: 2
91739276: RNCC: 5 | RNVC: 2

9 Jul 1992

5340-14-521-9386
Lock-Release Lever

145219386
1004713Q01: RNCC: 3 | RNVC: 2

27 Sep 2000

5340-14-504-4708
Mounting Bracket

145044708
TR95215: RNCC: 3 | RNVC: 2

18 Feb 1998

5340-14-366-9347
Retaining Strap

143669347
003275080P: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-530-3075
Mounting Bracket

145303075
1214600: RNCC: 3 | RNVC: 2

29 May 2002

5340-14-424-7399
Webbing Strap

144247399
30331120D: RNCC: 3 | RNVC: 2

8 Jun 1988

5340-14-310-9012
Rim Lock Set

143109012
6569TC: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-417-7348
Butt Hinge

144177348
DA2C88P030010: RNCC: 3 | RNVC: 2
91615616: RNCC: 5 | RNVC: 2

22 Jul 1987

5340-14-545-8879
Webbing Strap

145458879
152051: RNCC: 3 | RNVC: 2

25 May 2005

5340-14-536-8572
Mounting Bracket

145368572
29216: RNCC: 3 | RNVC: 2

17 Sep 2003

5340-14-469-4136
Turnbuckle Body

144694136
36132UB32A064: RNCC: 2 | RNVC: 2
19293: RNCC: 3 | RNVC: 2
Z00.N6042307220: RNCC: 5 | RNVC: 2
Z00.N7799233627: RNCC: 5 | RNVC: 2
Z00.N6042307220TBM: RNCC: 5 | RNVC: 9

20 Apr 1994

5340-14-391-5660
Anchor Strap

143915660
0000504315: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-386-4642
Rod End Clevis

143864642
DA1D213103431: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-538-2668
Loop Clamp

145382668
NGM0010033870471: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-345-1353
Rod End Clevis

143451353
1051030008: RNCC: 3 | RNVC: 2
1051030008: RNCC: 5 | RNVC: 2

5 Oct 1977

5340-14-425-8899
Access Cover

144258899
059598A01TRA: RNCC: 3 | RNVC: 2
059598A: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-14-526-2521
Mounting Plate

145262521
10569959: RNCC: 3 | RNVC: 2

11 Jul 2001

5340-14-403-3322
Retaining Strap

144033322
206305: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-441-1398
Rod End Clevis

144411398
20294774: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-361-8625
Loop Clamp

143618625
51123105037: RNCC: 3 | RNVC: 2
24GE37: RNCC: 5 | RNVC: 2
25GE37: RNCC: 5 | RNVC: 2

20 Feb 1980

5340-14-466-5314
Access Cover

144665314
45284482: RNCC: 3 | RNVC: 2
46252999: RNCC: 3 | RNVC: 2
45284482: RNCC: 5 | RNVC: 9

15 Nov 1993

5340-14-481-6330
Plug Button

144816330
1068388Y01: RNCC: 3 | RNVC: 2

23 May 1996

5340-14-296-9521
Rod End Clevis

142969521
178438: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-508-2694
Mounting Plate

145082694
10270771: RNCC: 3 | RNVC: 2

2 Sep 1998

5340-14-445-2510
Retaining Strap

144452510
233240W: RNCC: 3 | RNVC: 2

6 Feb 1991

5340-14-341-2251
Bow Handle

143412251
425-19219-000: RNCC: 3 | RNVC: 2
425-19219-000: RNCC: 5 | RNVC: 2

16 Mar 1977

5340-14-339-2950
Strap Fastener Loop

143392950
324-2: RNCC: 3 | RNVC: 2
324-2: RNCC: 5 | RNVC: 9

18 Jan 1977

5340-14-502-4601
Mounting Bracket

145024601
SUP-Q85202B00: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-309-7328
Retaining Band

143097328
C63191-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-302-5488
Butt Hinge

143025488
330A25-2162-02: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-376-5483
Access Cover

143765483
11-717-300: RNCC: 3 | RNVC: 2
11-717-300: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-484-4882
Door Holder

144844882
838A12V-800N: RNCC: 3 | RNVC: 2
040400: RNCC: 3 | RNVC: 2
2007366W00: RNCC: 5 | RNVC: 2

21 Nov 1996

5340-14-482-0131
Mounting Plate

144820131
13-046-700: RNCC: 3 | RNVC: 2
13-046-700: RNCC: 5 | RNVC: 9

13 Jun 1996

5340-14-532-3962
Angle Bracket

145323962
78703-20-033G: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-256-5661
Loop Clamp

142565661
MARJ231: RNCC: 3 | RNVC: 2
922-2: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-454-3649
Rod End Connector

144543649
306-2-TYPENL225F165P20: RNCC: 3 | RNVC: 2

1 Apr 1992

5340-14-413-9676
Access Cover

144139676
ST406M12G42: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-413-0891
Anchor Strap

144130891
337631: RNCC: 3 | RNVC: 2
337631: RNCC: 5 | RNVC: 9

26 Nov 1986

5340-14-439-6785
Access Cover

144396785
16348170: RNCC: 3 | RNVC: 2

16 May 1990

5340-14-422-5698
Anchor Strap

144225698
4772102510: RNCC: 3 | RNVC: 2

10 Mar 1988

5340-14-525-6610
Access Cover

145256610
20 242 030 9900: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-386-4644
Rod End Clevis

143864644
DA1D217107001: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-511-6891
Access Cover

145116891
7701016510: RNCC: 3 | RNVC: 2

11 Jan 1999

5340-14-551-8533
Spring Holder

145518533
0025333: RNCC: 3 | RNVC: 2

2 Nov 2006

5340-14-554-1748
Mounting Bracket

145541748
82078069000: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-383-4401
Runner

143834401
20068582: RNCC: 3 | RNVC: 2
20068582: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-460-3474
Rim Lock

144603474
AE2VP511: RNCC: 3 | RNVC: 2
3389110577891: RNCC: 5 | RNVC: 2

21 Jan 1993

5340-14-446-0831
Mounting Plate

144460831
007841035P: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-402-0982
Angle Bracket

144020982
406115: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-532-8046
Retaining Clip

145328046
7928 28: RNCC: 3 | RNVC: 2

17 Dec 2002

5340-14-535-2573
Handle Grip

145352573
RA1M701205541: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-321-0069
Control Rod

143210069
15141968: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-357-0470
Retaining Strap

143570470
388313: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-454-2982
Retaining Strap

144542982
21S0401601: RNCC: 3 | RNVC: 2
21S0401601: RNCC: 5 | RNVC: 2

26 Mar 1992

5340-14-380-0508
Webbing Strap

143800508
004988050P: RNCC: 3 | RNVC: 2

8 Nov 1982

5340-14-497-1519
Ladder Safety Shoe

144971519
548108: RNCC: 3 | RNVC: 2
F300 0T 022 7142: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-544-9492
Mounting Bracket

145449492
82073374000: RNCC: 3 | RNVC: 2

7 Mar 2005

5340-14-416-6804
Angle Bracket

144166804
412802020008: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-361-1653
Retaining Strap

143611653
114083008: RNCC: 3 | RNVC: 2
114083008: RNCC: 5 | RNVC: 2

24 Jan 1980

5340-14-375-1627
Angle Bracket

143751627
0000478645: RNCC: 3 | RNVC: 2
478645: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-395-0718
Pipe Hanger

143950718
D54254: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-427-5000
Mounting Bracket

144275000
255586: RNCC: 3 | RNVC: 2

20 Oct 1988

5340-14-266-1475
Mending Plate

142661475
26241076: RNCC: 3 | RNVC: 2
C241076: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-438-9531
Mounting Bracket

144389531
EDM0521: RNCC: 3 | RNVC: 2
39515215: RNCC: 5 | RNVC: 2

11 Apr 1990

5340-14-319-1891
Detent Plunger

143191891
20627912-2: RNCC: 3 | RNVC: 2
GDM004: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-281-2589
Rod End Clevis

142812589
121E26-719-01-0: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-308-9965
Rod End Clevis

143089965
7M93-23D: RNCC: 3 | RNVC: 2
CMC5-113: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-509-8046
Access Cover

145098046
1600-101-225-01: RNCC: 3 | RNVC: 2
1560AA0012058: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-344-4534
Loop Clamp

143444534
EA1M705-13-830: RNCC: 3 | RNVC: 2

10 Aug 1977

5340-14-418-6247
Mortise Lock Set

144186247
5272-5290FLASQUESINOXGAUCHE: RNCC: 3 | RNVC: 2

7 Sep 1987

5340-14-397-4248
Flush Door Ring

143974248
3062: RNCC: 3 | RNVC: 9

14 Dec 1984

5340-14-433-4425
Pawl Fastener

144334425
46590: RNCC: 3 | RNVC: 2

26 Jul 1989

5340-14-441-6670
Butt Hinge

144416670
BN339-506A02-0-014: RNCC: 2 | RNVC: 2

10 Sep 1990

5340-14-296-1439
Angle Bracket

142961439
341A76-1303-20: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-296-3496
Angle Bracket

142963496
CAP10-10-17-022: RNCC: 3 | RNVC: 9

1 Jan 1973

5340-14-338-3386
Handwheel

143383386
GSM137-013DF16: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-544-3021
Rim Latch

145443021
62-43-251-3: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-14-304-3895
Flush Catch

143043895
Z360-001: RNCC: 3 | RNVC: 2
80471: RNCC: 5 | RNVC: 2
85-686-1719: RNCC: 6 | RNVC: 9

1 Jan 1974

5340-14-299-2362
Mending Plate

142992362
NO PRIMARY REF14-299-2362: RNCC: 3 | RNVC: 2
42-86-13-51: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-518-8752
Cover Strip

145188752
332A22-0110-JW: RNCC: 3 | RNVC: 2

23 Feb 2000

5340-14-297-9347
Mounting Plate

142979347
508100-08: RNCC: 3 | RNVC: 2
2-13781: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-343-6290
Angle Bracket

143436290
330A75-1927-00: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-14-405-5387
Mounting Plate

144055387
NO PRIMARY REF14-405-5387: RNCC: 3 | RNVC: 2
46521: RNCC: 5 | RNVC: 9

27 Nov 1985

5340-14-442-6608
Bow Handle

144426608
2386: RNCC: 3 | RNVC: 2

24 Oct 1990

5340-14-544-1345
Angle Bracket

145441345
Y00004890: RNCC: 3 | RNVC: 2
Y00004890: RNCC: 5 | RNVC: 2

5 Jan 2005

5340-14-508-7939
Mounting Bracket

145087939
PE 12911: RNCC: 3 | RNVC: 2
PE12911: RNCC: 5 | RNVC: 9

30 Sep 1998

5340-14-504-9983
Angle Bracket

145049983
5000691315: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-460-7060
Mending Plate

144607060
45057807: RNCC: 3 | RNVC: 2
45057807: RNCC: 5 | RNVC: 9

4 Feb 1993

5340-14-457-8850
Locking Stay

144578850
02864579D20A: RNCC: 3 | RNVC: 2

24 Sep 1992

5340-14-511-5846
Angle Bracket

145115846
D65755: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-544-3466
Mounting Plate

145443466
S531A2005105: RNCC: 3 | RNVC: 2

21 Jan 2005

5340-14-446-1103
Synchro Clamp

144461103
ST406M63P12E17: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-560-4398
Utility Access Door

145604398
95181: RNCC: 3 | RNVC: 2

20 Apr 2009

5340-14-551-3360
Pipe Hanger

145513360
RA1M702446119: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-396-2148
Anchor Strap

143962148
477436C: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-384-6965
Access Cover

143846965
16170272: RNCC: 3 | RNVC: 2
16170272: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-552-0952
Buckle

145520952
17519: RNCC: 3 | RNVC: 2

24 Nov 2006

5340-14-371-1201
Angle Bracket

143711201
A11A221276090A1: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-406-1360
Runner

144061360
12312: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-300-3262
Rod End Clevis

143003262
15145054: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-471-8418
Handle Grip

144718418
2860000: RNCC: 3 | RNVC: 2
N2860000: RNCC: 3 | RNVC: 2
286000: RNCC: 5 | RNVC: 2

21 Sep 1994

5340-14-448-4068
Snap Hook

144484068
903: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-14-531-1956
Access Cover

145311956
40P575: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-504-0919
Mounting Plate

145040919
39079716: RNCC: 3 | RNVC: 2
39079716: RNCC: 3 | RNVC: 9

5 Feb 1998

5340-14-487-5556
Mounting Plate

144875556
78736TK050B17XA: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-553-9648
Angle Bracket

145539648
10653378001: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-14-515-4212
Loop Clamp

145154212
41610034A: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-303-3578
Retaining Strap

143033578
1849M3: RNCC: 3 | RNVC: 2
1849M3: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-448-0737
Cover Strip

144480737
PM1A711050104: RNCC: 3 | RNVC: 2
PM1A711050104: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-519-5563
Mounting Plate

145195563
802404: RNCC: 3 | RNVC: 9

22 Mar 2000

5340-14-532-1733
Mounting Bracket

145321733
8041200B00: RNCC: 3 | RNVC: 2

16 Oct 2002

5340-14-519-5349
Mounting Plate

145195349
151-5458: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-544-3073
Mounting Bracket

145443073
BAZ2598: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-14-441-1344
Mounting Bracket

144411344
16765855: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-390-3780
Mounting Plate

143903780
29776411: RNCC: 3 | RNVC: 9

26 Jan 1984

5340-14-388-4710
Angle Bracket

143884710
02230008494: RNCC: 3 | RNVC: 2
59538545: RNCC: 5 | RNVC: 2

3 Nov 1983

5340-14-341-7966
Retaining Clip

143417966
17F0354: RNCC: 3 | RNVC: 2
18F2102: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-360-8177
Mending Plate

143608177
1101242: RNCC: 3 | RNVC: 9

19 Dec 1979

5340-14-464-3298
Angle Bracket

144643298
5210800: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-547-7800
Mounting Bracket

145477800
5010650122: RNCC: 3 | RNVC: 2

12 Nov 2005

5340-14-548-6839
Angle Bracket

145486839
RA1M703816263N1: RNCC: 3 | RNVC: 2

31 Jan 2006

5340-14-411-4343
Loop Clamp

144114343
A11A822310120: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-461-6735
Mounting Bracket

144616735
0000790584: RNCC: 3 | RNVC: 2
TID25135: RNCC: 5 | RNVC: 2

22 Mar 1993

5340-14-454-2199
Angle Bracket

144542199
4772203660: RNCC: 3 | RNVC: 2
5044538: RNCC: 5 | RNVC: 9

26 Mar 1992

5340-14-508-0827
Runner

145080827
8900000685: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-532-1409
Mounting Bracket

145321409
5010579400: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-14-459-7301
Cover Strip

144597301
LN321022REP8JAG3: RNCC: 3 | RNVC: 2
RAB0170: RNCC: 5 | RNVC: 2

15 Dec 1992

5340-14-550-8419
Protection Bellows

145508419
U8R-04: RNCC: 3 | RNVC: 2

20 Jul 2006

5340-14-473-8461
Mounting Bracket

144738461
332A75-1206-20: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-508-8124
Mounting Plate

145088124
94-98-2: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-14-436-2729
Bow Handle

144362729
C2PT4253-10003: RNCC: 3 | RNVC: 2
C2PT4253-10003: RNCC: 5 | RNVC: 2

13 Dec 1989

5340-14-459-1252
Compression Cup

144591252
737219-REP1: RNCC: 3 | RNVC: 2

19 Nov 1992

5340-14-205-8990
Bumper

142058990
253-5M363P27: RNCC: 3 | RNVC: 9
PA253-5M363P27: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-465-4865
Tee Hinge

144654865
365A25-3066-08: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-509-8286
Pad Eye

145098286
NO PRIMARY REF14-509-8286: RNCC: 3 | RNVC: 2
09-9649-02: RNCC: 5 | RNVC: 9
5340AA0015642: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-440-8738
Rim Lock Set

144408738
PE75029-5: RNCC: 3 | RNVC: 2

31 Jul 1990

5340-14-440-4566
Control Rod

144404566
6J8-43617-00: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-442-3173
Vent Plug

144423173
332A55-0300-0187: RNCC: 3 | RNVC: 2

10 Oct 1990

5340-14-525-4818
Mounting Plate

145254818
K15-975-PGS-607: RNCC: 3 | RNVC: 2

6 Jun 2001

5340-14-289-3165
Retaining Strap

142893165
M208-21118: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-322-0404
Exit Bolt

143220404
NO PRIMARY REF14-322-0404: RNCC: 3 | RNVC: 2
0854380500: RNCC: 5 | RNVC: 2
8543805: RNCC: 5 | RNVC: 9
0854380500: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-466-9560
Shelf Bracket

144669560
REMDCHEGZLE-SERT-010020: RNCC: 3 | RNVC: 2

9 Dec 1993

5340-14-531-8183
Pipe Hanger

145318183
341A61-5021-20: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-14-501-9420
Mounting Bracket

145019420
332A54-1166-00: RNCC: 3 | RNVC: 2

19 Nov 1997

5340-14-388-8060
Buckle

143888060
A2036-12: RNCC: 3 | RNVC: 9

29 Nov 1983

5340-14-464-9335
Mounting Plate

144649335
9970-135-236: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-465-4957
Mounting Plate

144654957
365A61-3110-67: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-484-8174
Mounting Bracket

144848174
332P65-1217-0790: RNCC: 3 | RNVC: 2

5 Dec 1996

5340-14-358-3438
Clamping Catch

143583438
GE.51-ZB: RNCC: 3 | RNVC: 2
GE51CB: RNCC: 5 | RNVC: 2
GE51ZB: RNCC: 5 | RNVC: 2
91851330: RNCC: 5 | RNVC: 2

13 Aug 1979

5340-14-353-2049
Threaded Rod End

143532049
PAA50-31-002: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-269-9084
Synchro Clamp

142699084
NO PRIMARY REF14-269-9084: RNCC: 3 | RNVC: 2
445510: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-345-2485
Loop Clamp

143452485
FB1C702-48: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-456-8736
Arched Cushion

144568736
MAT169-0012F20DE31: RNCC: 3 | RNVC: 2

24 Jul 1992

5340-14-356-0416
Angle Bracket

143560416
F10A705200019: RNCC: 3 | RNVC: 2
85-689-8209: RNCC: 6 | RNVC: 9

5 Apr 1979

5340-14-497-7891
Access Cover

144977891
NO PRIMARY REF14-497-7891: RNCC: 3 | RNVC: 2
NNP7320840015556: RNCC: 5 | RNVC: 9

15 Oct 1997

5340-14-473-4329
Mounting Bracket

144734329
VIP-150N: RNCC: 3 | RNVC: 2

31 Dec 1994

5340-14-508-9200
Mounting Plate

145089200
454257: RNCC: 3 | RNVC: 2
454257-001: RNCC: 5 | RNVC: 9

7 Oct 1998

5340-14-413-2746
Access Cover

144132746
300101492: RNCC: 3 | RNVC: 2
300101492: RNCC: 3 | RNVC: 9

26 Nov 1986

5340-14-356-5443
Rod End Clevis

143565443
TLH0TB231: RNCC: 3 | RNVC: 2

15 May 1979

5340-14-397-8847
Anchor Strap

143978847
5143056: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-550-3351
Bumper

145503351
2716056520: RNCC: 3 | RNVC: 2

16 Jun 2006

5340-14-526-7729
Access Cover

145267729
5614636A: RNCC: 3 | RNVC: 2

5 Sep 2001

5340-14-237-5241
Access Cover

142375241
70808317: RNCC: 3 | RNVC: 2
70808317: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-533-6747
Mounting Bracket

145336747
F1263073: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-14-484-0365
Access Cover

144840365
19457: RNCC: 3 | RNVC: 2
5000663326: RNCC: 5 | RNVC: 2

17 Oct 1996

5340-14-482-8664
Access Cover

144828664
39142993: RNCC: 3 | RNVC: 2
39142993: RNCC: 5 | RNVC: 2

1 Aug 1996

5340-14-397-5993
Access Cover

143975993
3106256: RNCC: 3 | RNVC: 2
3106256: RNCC: 5 | RNVC: 2

14 Dec 1984

5340-14-481-3536
Access Cover

144813536
10161916: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-554-5800
Access Cover

145545800
SP819650A: RNCC: 3 | RNVC: 2

23 Jul 2007

5340-14-512-3409
Mounting Bracket

145123409
10345694: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-14-502-8038
Detent Plunger

145028038
8T1782: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-544-3435
Shelf Bracket

145443435
S532A4041122: RNCC: 3 | RNVC: 2

21 Jan 2005

5340-14-524-5792
Snap Hook

145245792
29898: RNCC: 3 | RNVC: 2
SYB2315: RNCC: 5 | RNVC: 2

27 Mar 2001

5340-14-462-7374
Synchro Clamp

144627374
PM1A728110004: RNCC: 3 | RNVC: 2
PM1A728110004: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-14-514-4677
Angle Bracket

145144677
10350339: RNCC: 3 | RNVC: 2

26 May 1999

5340-14-553-6859
Mounting Bracket

145536859
82179150000: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-354-7629
Bridge Clamp

143547629
55256: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-461-6015
Detent Plunger

144616015
SHS1C0400A: RNCC: 3 | RNVC: 2

17 Mar 1993

5340-14-521-8805
Loop Clamp

145218805
DLT058156: RNCC: 3 | RNVC: 2

20 Sep 2000

5340-14-281-2204
Retaining Strap

142812204
10100129: RNCC: 3 | RNVC: 2
10100129: RNCC: 5 | RNVC: 2
CHR10100129: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-307-3534
Buckle

143073534
323: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-402-5779
Access Cover

144025779
400584: RNCC: 3 | RNVC: 2
BGE400584: RNCC: 5 | RNVC: 2

19 Jul 1985

5340-14-336-7036
Rod End Clevis

143367036
0703600400: RNCC: 3 | RNVC: 2
0703600400: RNCC: 3 | RNVC: 2
0703600400: RNCC: 5 | RNVC: 9

7 Oct 1976

5340-14-513-8081
Mounting Plate

145138081
DE21836: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-337-6646
Rod End Clevis

143376646
0607564900: RNCC: 3 | RNVC: 2
0607564900: RNCC: 5 | RNVC: 9

6 Nov 1976

5340-14-545-3941
Bail Handle

145453941
4HC105: RNCC: 3 | RNVC: 2
9610090490: RNCC: 5 | RNVC: 2
3006264: RNCC: 5 | RNVC: 2
9610090490: RNCC: 5 | RNVC: 2

11 Apr 2005

5340-14-407-5281
Bumper

144075281
EMB0UTADIAM21N0IR: RNCC: 3 | RNVC: 2
570140: RNCC: 5 | RNVC: 2

27 Feb 1986

5340-14-409-6958
Runner

144096958
78763DG0225A: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-350-5119
Retaining Strap

143505119
45494: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-552-1057
Angle Bracket

145521057
0076330150: RNCC: 3 | RNVC: 2

27 Nov 2006

5340-14-456-2764
Mounting Plate

144562764
606089: RNCC: 3 | RNVC: 2

25 Jun 1992

5340-14-455-7478
Cover Strip

144557478
ZF05961077: RNCC: 3 | RNVC: 2
5961077: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-350-2116
Handwheel

143502116
1996: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-422-4033
Mounting Plate

144224033
342691: RNCC: 3 | RNVC: 2
342691: RNCC: 5 | RNVC: 9

3 Mar 1988

5340-14-395-9720
Retaining Strap

143959720
193637: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-451-7530
Access Cover

144517530
D53963: RNCC: 3 | RNVC: 2
D53963: RNCC: 5 | RNVC: 2

4 Dec 1991

5340-14-509-0246
Mounting Plate

145090246
FH152803210: RNCC: 3 | RNVC: 2
FH152803200: RNCC: 3 | RNVC: 9

14 Oct 1998

5340-14-381-4110
Webbing Strap

143814110
225110: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-405-3103
Butt Hinge

144053103
U401859734: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-482-8066
Mounting Plate

144828066
HSS831AHB309: RNCC: 3 | RNVC: 2
89167029: RNCC: 5 | RNVC: 2

25 Jul 1996

5340-14-478-1072
Stand Base

144781072
RA1M112115350: RNCC: 3 | RNVC: 2

11 Oct 1995

5340-14-453-7062
Access Cover

144537062
3511 191 93151: RNCC: 3 | RNVC: 2
3511 191 93151: RNCC: 5 | RNVC: 2

5 Mar 1992

5340-14-265-6952
Rod End Clevis

142656952
154913: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-444-4032
Access Cover

144444032
39155491: RNCC: 3 | RNVC: 2

9 Jan 1991

5340-14-529-8407
Mounting Bracket

145298407
COU001552016120: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-447-6402
Angle Bracket

144476402
5000916476: RNCC: 3 | RNVC: 2

29 May 1991

5340-14-517-3985
Utility Access Door

145173985
803481140113: RNCC: 3 | RNVC: 2
SDM803481140113: RNCC: 5 | RNVC: 9

8 Dec 1999

5340-14-509-0909
Access Cover

145090909
4610233006: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-455-2042
Plug Button

144552042
2617: RNCC: 3 | RNVC: 2
HEYCO 2617: RNCC: 5 | RNVC: 2

8 May 1992

5340-14-469-2827
Clamping Catch

144692827
640.30.24: RNCC: 3 | RNVC: 2
1087842W00: RNCC: 5 | RNVC: 2

18 Apr 1994

5340-14-418-1335
Access Cover

144181335
059624F01TRA: RNCC: 3 | RNVC: 2
059624F: RNCC: 5 | RNVC: 2

6 Aug 1987

5340-14-224-8834
Bumper

142248834
GSM1674A41: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-367-5930
Access Cover

143675930
120538: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-521-5005
Utility Access Door

145215005
Y00005362: RNCC: 3 | RNVC: 2
Y00005362: RNCC: 5 | RNVC: 9

2 Aug 2000

5340-14-455-9474
Access Cover

144559474
PM1A761162250: RNCC: 3 | RNVC: 2
PM1A761162250: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-294-3542
Access Cover

142943542
0235600030: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-348-0288
Access Cover

143480288
1066065: RNCC: 3 | RNVC: 2
1066065: RNCC: 5 | RNVC: 2

29 Mar 1978

5340-14-451-2412
Mounting Plate

144512412
PM1A333110112U1: RNCC: 3 | RNVC: 2
PM1A333110112U1: RNCC: 5 | RNVC: 2

6 Nov 1991

5340-14-544-4247
Mounting Bracket

145444247
5001864788: RNCC: 3 | RNVC: 2

31 Jan 2005

5340-14-520-1742
Access Cover

145201742
46240252: RNCC: 3 | RNVC: 2
46240252: RNCC: 3 | RNVC: 9

17 May 2000

5340-14-551-9190
Access Cover

145519190
21EW8606: RNCC: 3 | RNVC: 2

8 Nov 2006

5340-14-293-3132
Access Cover

142933132
10100588: RNCC: 3 | RNVC: 2
10100588: RNCC: 5 | RNVC: 2
CHR10100588: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-405-2646
Bow Handle

144052646
313742: RNCC: 3 | RNVC: 2
313742: RNCC: 5 | RNVC: 9

27 Nov 1985

5340-14-500-8930
Access Cover

145008930
B66401100057: RNCC: 3 | RNVC: 2
F300 0T 024 9135: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-468-3959
Anchor Strap

144683959
168274: RNCC: 3 | RNVC: 2
89170292: RNCC: 5 | RNVC: 2

23 Feb 1994

5340-14-523-6690
Access Cover

145236690
J5340309: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-031-8356
Rod End Clevis

140318356
53754: RNCC: 3 | RNVC: 2
VDPM02775: RNCC: 5 | RNVC: 2

5 Jul 1980

5340-14-226-0876
Access Cover

142260876
TID11437: RNCC: 3 | RNVC: 2
062053797: RNCC: 3 | RNVC: 9
53797: RNCC: 5 | RNVC: 9
701584: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-530-9805
Access Cover

145309805
RA1M622562820A1: RNCC: 3 | RNVC: 2

18 Jul 2002

5340-14-520-6896
Locking Stay

145206896
32117130156: RNCC: 3 | RNVC: 2
SDM32117130156: RNCC: 5 | RNVC: 9

31 May 2000

5340-14-525-7989
Rod End Clevis

145257989
F145708: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-533-8396
Locking Stay

145338396
56293791: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-457-2841
Rod End Clevis

144572841
1304301: RNCC: 3 | RNVC: 2

20 Aug 1992

5340-14-518-9918
Clamping Catch

145189918
707316: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-308-1499
Retaining Strap

143081499
C48065: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-508-5265
Bumper

145085265
10430652: RNCC: 3 | RNVC: 2

16 Sep 1998

5340-14-522-3209
Mounting Bracket

145223209
10472181: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-14-555-1134
Mounting Bracket

145551134
10722629000: RNCC: 3 | RNVC: 2

2 Oct 2007

5340-14-521-9587
Rod End Clevis

145219587
TPS1A1002A: RNCC: 3 | RNVC: 2

27 Sep 2000

5340-14-530-5963
Rod End Clevis

145305963
F00113831: RNCC: 3 | RNVC: 2

26 Jun 2002

Load More Results