What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 13 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 13 of 446

5340-14-416-0795
Clamping Catch

144160795
GR.57-EZB: RNCC: 3 | RNVC: 2
GR57EZB: RNCC: 5 | RNVC: 2
5010003312: RNCC: E | RNVC: 8

3 Jun 1987

5340-14-303-5069
Loop Clamp

143035069
NO PRIMARY REF14-303-5069: RNCC: 3 | RNVC: 2
48-26-30-051: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-336-3983
Corner Brace

143363983
330A22-2711-21: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-568-8572
Utility Resilient Mount

145688572
BFC-16: RNCC: 3 | RNVC: 2

12 Jul 2011

5340-14-357-8574
Access Cover

143578574
3511-131-32831: RNCC: 3 | RNVC: 2
3511 131 32831: RNCC: 5 | RNVC: 2

20 Jul 1979

5340-14-459-2515
Section Block Clamp

144592515
F706-78-02: RNCC: 3 | RNVC: 2

19 Nov 1992

5340-14-391-8115
Loop Clamp

143918115
365A92-1154-11: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-451-6920
Mending Plate

144516920
P10-230-004: RNCC: 3 | RNVC: 9

2 Dec 1991

5340-14-412-7196
Loop Clamp

144127196
LABESSE 660386-00: RNCC: 3 | RNVC: 2
660386-00: RNCC: 5 | RNVC: 9

27 Oct 1986

5340-14-541-7429
Detent Plunger

145417429
457-01923-001: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-381-1951
Mending Plate

143811951
2206-512A508: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-337-9422
Access Cover

143379422
0294800070: RNCC: 3 | RNVC: 2
302-272-201P: RNCC: 5 | RNVC: 2

6 Nov 1976

5340-14-320-7818
Loop Clamp

143207818
15260M10M: RNCC: 3 | RNVC: 2
620-854-634-0: RNCC: 5 | RNVC: 2
620-854-634-0: RNCC: 5 | RNVC: 2
15260M10M: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-568-8232
Utility Resilient Mount

145688232
BFN45-800: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-14-456-8804
Access Cover

144568804
J05402-01-0401P016: RNCC: 3 | RNVC: 2

24 Jul 1992

5340-14-297-1366
Pipe Hanger

142971366
MY20515-11820: RNCC: 3 | RNVC: 2
MY20-515-11-820: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-545-4383
Angle Bracket

145454383
78690-21-38C: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-365-7500
Access Cover

143657500
3153: RNCC: 3 | RNVC: 9
10-00-1035: RNCC: 5 | RNVC: 9

8 Oct 1980

5340-14-515-6090
Mounting Plate

145156090
JS111631: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-438-9617
Mounting Bracket

144389617
330A98-2085-10: RNCC: 3 | RNVC: 2

11 Apr 1990

5340-14-392-7945
Retaining Strap

143927945
11506-160-011: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-472-3316
Synchro Clamp

144723316
51251: RNCC: 3 | RNVC: 2

19 Oct 1994

5340-14-507-8210
Loop Clamp

145078210
2487-104/U1494: RNCC: 3 | RNVC: 2
NNP5340929204153: RNCC: 5 | RNVC: 2
2487-104: RNCC: 5 | RNVC: 2

19 Aug 1998

5340-14-381-2455
Angle Bracket

143812455
155399: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-409-9341
Lock-Release Lever

144099341
8923-28: RNCC: 3 | RNVC: 9
9223334380: RNCC: 5 | RNVC: 2
9223334380: RNCC: 5 | RNVC: 9

4 Jun 1986

5340-14-405-8297
Access Cover

144058297
821M218-81REP5: RNCC: 3 | RNVC: 2

4 Dec 1985

5340-14-403-7055
Access Cover

144037055
A46447-23: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-511-2553
Plug Button

145112553
204080: RNCC: 3 | RNVC: 2
204080-001: RNCC: 5 | RNVC: 9

9 Dec 1998

5340-14-541-8790
Rim Latch

145418790
5302835-036-01-AETA1: RNCC: 3 | RNVC: 2
5302835-036-01AETA1: RNCC: 5 | RNVC: 2

30 Jun 2004

5340-14-247-3416
Rod End Clevis

142473416
321A57-0178-20: RNCC: 3 | RNVC: 2
85-648-9790: RNCC: 6 | RNVC: 9

1 Jan 1968

5340-14-549-9616
Mounting Plate

145499616
169E769-00: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-546-2003
Handle Grip

145462003
480080S140-01A: RNCC: 3 | RNVC: 2

15 Jun 2005

5340-14-470-5439
Loop Clamp

144705439
EA5M701-55-15: RNCC: 3 | RNVC: 2

22 Jun 1994

5340-14-457-8989
Support Hook

144578989
100SP40-0012: RNCC: 3 | RNVC: 2
57904: RNCC: 5 | RNVC: 2

29 Sep 1992

5340-14-299-3358
Mending Plate

142993358
MY20552-8508: RNCC: 3 | RNVC: 2
MY20-552-85-08: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-300-9559
Mending Plate

143009559
341A91-2310-20: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-522-3750
Retaining Band

145223750
F773-23900M1: RNCC: 3 | RNVC: 2

25 Oct 2000

5340-14-345-6659
Synchro Clamp

143456659
A0142-178: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-454-0014
Synchro Clamp

144540014
303-280-415-0: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-14-235-4586
Bow Handle

142354586
NO PRIMARY REF14-235-4586: RNCC: 3 | RNVC: 2
3174-4: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-472-4036
Mounting Bracket

144724036
350A57-1474-21: RNCC: 3 | RNVC: 2

19 Oct 1994

5340-14-354-2798
Loop Clamp

143542798
PAA73-10-002-1: RNCC: 3 | RNVC: 2

30 Jan 1979

5340-14-304-7962
Mending Plate

143047962
NO PRIMARY REF14-304-7962: RNCC: 3 | RNVC: 2
29-02-10-32: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-386-9965
Loop Clamp

143869965
NO PRIMARY REF14-386-9965: RNCC: 3 | RNVC: 2
C4-22: RNCC: 5 | RNVC: 9

24 Aug 1983

5340-14-483-7282
Loop Clamp

144837282
501-880-512-0: RNCC: 3 | RNVC: 2

27 Sep 1996

5340-14-275-5981
Expansion Plug

142755981
23008438: RNCC: 3 | RNVC: 2
23008438-5: RNCC: 5 | RNVC: 2
24C2F139: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-275-2836
Rod End Clevis

142752836
501-709-057-0: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-484-6479
Push Door Plate

144846479
A03001-01-0000P011: RNCC: 3 | RNVC: 2
356499-001: RNCC: 5 | RNVC: 2

28 Nov 1996

5340-14-355-2178
Retaining Strap

143552178
62505-367-690NP: RNCC: 3 | RNVC: 2
62505-367-690NP: RNCC: 5 | RNVC: 2

19 Mar 1979

5340-14-473-3823
Mounting Plate

144733823
332A25-1287-21: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-362-1060
Detent Plunger

143621060
B0277-009F28: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-200-1227
Loop Clamp

142001227
0202000300: RNCC: 3 | RNVC: 2
202-00-030: RNCC: 5 | RNVC: 2

1 Jan 1962

5340-14-526-0760
Arched Cushion

145260760
E1M370930: RNCC: 3 | RNVC: 2
MAT169-0024F9FORTERAIDEUR: RNCC: 3 | RNVC: 2

2 Jul 2001

5340-14-299-7289
Rod End Clevis

142997289
1-1082AA03-03: RNCC: 3 | RNVC: 9

1 Jan 1973

5340-14-444-5691
Mounting Plate

144445691
1230-01-01: RNCC: 3 | RNVC: 2
TB2030107: RNCC: 5 | RNVC: 2
F300 0T 005 9490: RNCC: 6 | RNVC: 9

15 Jan 1991

5340-14-458-5854
Threaded Rod End

144585854
E0052-03-04/35: RNCC: 3 | RNVC: 2

27 Oct 1992

5340-14-464-4622
Strap Fastener Loop

144644622
IF006-082: RNCC: 3 | RNVC: 2
RAR5682: RNCC: 5 | RNVC: 2
IF006082: RNCC: 5 | RNVC: 9

4 Aug 1993

5340-14-217-0788
Leaf Spring

142170788
2331216011: RNCC: 3 | RNVC: 2
SBF84-2X: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-462-1609
Bumper

144621609
DAR9-224: RNCC: 3 | RNVC: 2

13 Apr 1993

5340-14-312-4627
Snap Hook

143124627
BN339-506M05-0-120: RNCC: 2 | RNVC: 2
DNAR238: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-427-0615
Swivel Caster

144270615
619132P: RNCC: 3 | RNVC: 2
FD221B: RNCC: 5 | RNVC: 2
910818-001: RNCC: 5 | RNVC: 9

6 Oct 1988

5340-14-500-1323
Expansion Plug

145001323
NO PRIMARY REF14-500-1323: RNCC: 3 | RNVC: 2
51112011110: RNCC: 5 | RNVC: 2
SK120CK11-111: RNCC: 5 | RNVC: 2
SK120CK11-111: RNCC: 5 | RNVC: 2
F300 0T 024 1336: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-350-0013
Angle Bracket

143500013
51490-230-1: RNCC: 3 | RNVC: 9

14 Jun 1978

5340-14-549-8743
Runner

145498743
2093225-001: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-339-4837
Angle Bracket

143394837
M3C222-17-21: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-503-2339
Bumper

145032339
456499: RNCC: 3 | RNVC: 2
456499-001: RNCC: 5 | RNVC: 9

7 Jan 1998

5340-14-335-0516
Handwheel

143350516
MAT137-004F3AVIORB: RNCC: 3 | RNVC: 2
GSM137-007F23AVI0RB: RNCC: 5 | RNVC: 2
GSM137-07F23AVI0RB: RNCC: 5 | RNVC: 2

2 Jun 1976

5340-14-514-2985
Angle Bracket

145142985
330A61-7200-23: RNCC: 3 | RNVC: 2

7 May 1999

5340-14-291-1613
Mending Plate

142911613
50261-21: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-506-1869
Control Rod

145061869
052-684-000: RNCC: 3 | RNVC: 9

9 Apr 1998

5340-14-330-2848
Mending Plate

143302848
413-06058-000: RNCC: 3 | RNVC: 2
413-06058-000: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-371-5570
Bumper

143715570
366A51-1014-20: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-494-7058
Rod End Clevis

144947058
NO PRIMARY REF14-494-7058: RNCC: 3 | RNVC: 2
026-007: RNCC: 5 | RNVC: 9
026007: RNCC: 5 | RNVC: 9
F300 0T 017 8094: RNCC: 6 | RNVC: 9
F300 0T 022 5436: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-489-6224
Mounting Bracket

144896224
332A61-1888-21: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-309-4627
Mounting Plate

143094627
NO PRIMARY REF14-309-4627: RNCC: 3 | RNVC: 2
B0NC311447REP20: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-324-4485
Pipe Hanger

143244485
121E52-440-10-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-371-3956
Access Cover

143713956
6254-21152: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-329-5157
Retaining Strap

143295157
1799-23-01-02: RNCC: 3 | RNVC: 2
404530: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-555-1525
Door Holder

145551525
MAT523-0746A: RNCC: 3 | RNVC: 2

5 Oct 2007

5340-14-475-7250
Mounting Plate

144757250
3511 131 96581: RNCC: 3 | RNVC: 2
3511-131-96581: RNCC: 5 | RNVC: 2

26 Apr 1995

5340-14-525-8755
Synchro Clamp

145258755
457-02037-000: RNCC: 3 | RNVC: 2
457-02037-000: RNCC: 5 | RNVC: 9

15 Jun 2001

5340-14-262-3497
Rod End Clevis

142623497
9375-42: RNCC: 3 | RNVC: 2
9375-42: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-467-9539
Synchro Clamp

144679539
A14-58770: RNCC: 3 | RNVC: 2

2 Feb 1994

5340-14-404-0397
Angle Bracket

144040397
366A21-1243-3101: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-395-6430
Compression Cup

143956430
366A25-1290-20: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-438-4994
Rod End Clevis

144384994
MKT043-83: RNCC: 3 | RNVC: 2
85-694-0432: RNCC: 6 | RNVC: 9

21 Mar 1990

5340-14-380-3793
Quick Release Pin

143803793
425C8R08: RNCC: 3 | RNVC: 2
85-691-9781: RNCC: 6 | RNVC: 9

8 Nov 1982

5340-14-427-1269
Angle Bracket

144271269
M427-02123: RNCC: 3 | RNVC: 2

6 Oct 1988

5340-14-259-8914
Rod End Clevis

142598914
321A57-0241-20: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-384-1455
Loop Clamp

143841455
403-194-644-0: RNCC: 3 | RNVC: 2
650-791-048-0: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-326-9963
Shimmy Damper

143269963
K171-18A: RNCC: 3 | RNVC: 2
K171-18A: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-237-4994
Rod End Clevis

142374994
321A23-0252-00: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-554-9593
Mounting Plate

145549593
BOITE00525B00: RNCC: 3 | RNVC: 2
SERT/00525: RNCC: 5 | RNVC: 2

12 Sep 2007

5340-14-471-2262
Loop Clamp

144712262
F51AY0202-040: RNCC: 3 | RNVC: 2
F51AY0202-040: RNCC: 5 | RNVC: 2
F51AY0202-040: RNCC: 5 | RNVC: 9

8 Aug 1994

5340-14-408-6221
Loop Clamp

144086221
PE27010-24: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-332-4529
Rim Lock Set

143324529
NO PRIMARY REF14-332-4529: RNCC: 3 | RNVC: 2
1700-03-1729B1MN014: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-486-0432
Detent Plunger

144860432
429771: RNCC: 3 | RNVC: 2
429771-001: RNCC: 5 | RNVC: 9

26 Feb 1997

5340-14-305-4009
Mending Plate

143054009
49-01-11: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-447-3307
Plate Spacer

144473307
3-012-0007: RNCC: 3 | RNVC: 2
3-0120007: RNCC: 5 | RNVC: 2

15 May 1991

5340-14-384-7486
Access Cover

143847486
NO PRIMARY REF14-384-7486: RNCC: 3 | RNVC: 2
16932107: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-385-1750
Pipe Hanger

143851750
063274: RNCC: 3 | RNVC: 9
4814-18: RNCC: 5 | RNVC: 2
7903079028: RNCC: 5 | RNVC: 2
063274-941-901: RNCC: 5 | RNVC: 9

26 Jul 1983

5340-14-366-8635
Loop Clamp

143668635
EN4113S20NH: RNCC: 2 | RNVC: 2
215302000: RNCC: 3 | RNVC: 2
A0021-21S20: RNCC: 5 | RNVC: 2
51315305020: RNCC: 5 | RNVC: 9
21S20: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-530-3620
Strap Hinge

145303620
160-888071-09: RNCC: 3 | RNVC: 2

5 Jun 2002

5340-14-290-3054
Angle Bracket

142903054
330A58-1246-2101: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-377-9560
Handwheel

143779560
NO PRIMARY REF14-377-9560: RNCC: 3 | RNVC: 2
02201030: RNCC: 5 | RNVC: 9

10 Jun 1982

5340-14-384-1048
Rod End Connector

143841048
4681-222-10-26: RNCC: 3 | RNVC: 9
4681-222-1026: RNCC: 5 | RNVC: 9

4 May 1983

5340-14-521-2362
Angle Bracket

145212362
J05823-03-1000P011: RNCC: 3 | RNVC: 2

12 Jul 2000

5340-14-511-6251
Pipe Hanger

145116251
78733-050-028B: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-526-8067
Rod End Connector

145268067
AVP03803-01-180111: RNCC: 3 | RNVC: 2
SDMAVP03803-01-180111: RNCC: 5 | RNVC: 9

7 Sep 2001

5340-14-465-2827
Mounting Bracket

144652827
365A62-1871-01: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-349-4244
Loop Clamp

143494244
M3D882-40-12RN1: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-380-6304
Angle Bracket

143806304
3160S73-80-326: RNCC: 3 | RNVC: 2
85-692-1925: RNCC: 6 | RNVC: 9

29 Nov 1982

5340-14-429-9640
Loop Clamp

144299640
UCMC10-16: RNCC: 3 | RNVC: 9
284612: RNCC: 5 | RNVC: 9
F300 0T 005 8826: RNCC: 6 | RNVC: 9

21 Feb 1989

5340-14-479-0251
Magnetic Catch

144790251
235242: RNCC: 2 | RNVC: 2
A01437-02-0000P008: RNCC: 5 | RNVC: 2
342078-001: RNCC: 5 | RNVC: 9

6 Dec 1995

5340-14-435-0512
Block Fairlead

144350512
815-1-73-100: RNCC: 3 | RNVC: 2

17 Oct 1989

5340-14-546-1597
Rim Latch Set

145461597
19-416-41: RNCC: 3 | RNVC: 2

15 Jun 2005

5340-14-448-7114
Runner

144487114
A03037-10-2010P008: RNCC: 3 | RNVC: 2

4 Jul 1991

5340-14-435-0692
Retaining Strap

144350692
853-200-920-0: RNCC: 3 | RNVC: 2

18 Oct 1989

5340-14-526-8632
Loop Clamp

145268632
01080006013: RNCC: 3 | RNVC: 2
13/8-W4-VPE: RNCC: 5 | RNVC: 2
18584569-6: RNCC: 5 | RNVC: 2

12 Sep 2001

5340-14-308-9307
Clamping Catch

143089307
GO.6-CH: RNCC: 3 | RNVC: 2
G006CH: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-286-3723
Furniture Cup

142863723
AC41AVR67: RNCC: 2 | RNVC: 2
NO PRIMARY REF14-286-3723: RNCC: 3 | RNVC: 2
AC41AVR67: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-429-9785
Flush Catch Claw

144299785
04362-108: RNCC: 3 | RNVC: 2
0693 080: RNCC: 5 | RNVC: 2
693 080: RNCC: 5 | RNVC: 2
693-080: RNCC: 5 | RNVC: 2
NLM693-080: RNCC: 5 | RNVC: 2

22 Feb 1989

5340-14-455-9253
Cover Strip

144559253
PM1A232142: RNCC: 3 | RNVC: 2
PM1A232142: RNCC: 5 | RNVC: 2
85-801-3082: RNCC: 6 | RNVC: 9

11 Jun 1992

5340-14-554-5150
Clamping Catch

145545150
CC949PPIF-004: RNCC: 3 | RNVC: 2

17 Jul 2007

5340-14-388-8915
Butt Hinge

143888915
365A24-1197-20: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-552-8857
Access Cover

145528857
A00-03634-000: RNCC: 3 | RNVC: 2

10 Feb 2007

5340-14-529-5581
Mounting Bracket

145295581
330A64-1102-20: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-297-6191
Loop Clamp

142976191
1-1038-02-22: RNCC: 3 | RNVC: 9
1-1038-02-22: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-440-6750
Retaining Strap

144406750
332A81-0375-00: RNCC: 3 | RNVC: 2

18 Jul 1990

5340-14-533-7129
Mounting Bracket

145337129
336-031547-001A: RNCC: 3 | RNVC: 2

19 Feb 2003

5340-14-245-1509
Lock-Release Lever

142451509
321A58-0296-00: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-465-4813
Mounting Bracket

144654813
365A21-3186-25: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-408-7177
Anchor Strap

144087177
454616A: RNCC: 3 | RNVC: 2
454-616A: RNCC: 3 | RNVC: 2
200-022-990: RNCC: 5 | RNVC: 9
200022990: RNCC: 5 | RNVC: 9

2 Apr 1986

5340-14-259-5204
Runner

142595204
RU761-43M511-2P12D: RNCC: 3 | RNVC: 2
761-43M511-2P12D: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-335-8535
Access Cover

143358535
NO PRIMARY REF14-335-8535: RNCC: 3 | RNVC: 2
PLAN47-9B11-75PLAQUEAERATI0N: RNCC: 5 | RNVC: 9

24 Jul 1976

5340-14-389-4587
Mending Plate

143894587
365A55-3135-00: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-329-3874
Quick Release Pin

143293874
NO PRIMARY REF14-329-3874: RNCC: 3 | RNVC: 2
P701-05-10-500-17-00: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-514-4695
Bumper

145144695
IF-192-2516: RNCC: 3 | RNVC: 2
IF-192-2516: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-416-1396
Angle Bracket

144161396
NO PRIMARY REF14-416-1396: RNCC: 3 | RNVC: 2
Z50707: RNCC: 5 | RNVC: 9

3 Jun 1987

5340-14-486-6118
Butt Hinge

144866118
A10-12-928-15-2: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-14-541-8358
Mounting Plate

145418358
88179-1338: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-514-4713
Shelf Bracket

145144713
10326395: RNCC: 3 | RNVC: 2
IF-192-2312: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-420-6678
Access Cover

144206678
7111-353BV: RNCC: 3 | RNVC: 9
ROT7111-353BV: RNCC: 5 | RNVC: 9

16 Dec 1987

5340-14-444-6598
Plug Button

144446598
30-21-02-3: RNCC: 3 | RNVC: 2

16 Jan 1991

5340-14-315-4043
Rod End Clevis

143154043
4404-016: RNCC: 3 | RNVC: 2
4404-016: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-230-8076
Strap Fastener Loop

142308076
ANP51M53-15: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-471-0299
Loop Clamp

144710299
411729: RNCC: 3 | RNVC: 2
411729-001: RNCC: 5 | RNVC: 9

20 Jul 1994

5340-14-405-2463
Access Cover

144052463
P3H010667-00: RNCC: 3 | RNVC: 9
N3H010667-00: RNCC: 5 | RNVC: 9

27 Nov 1985

5340-14-473-8622
Angle Bracket

144738622
332A87-1110-31: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-407-5911
Loop Clamp

144075911
L086A3WJ: RNCC: 3 | RNVC: 2
DSU20418: RNCC: 5 | RNVC: 2
57091: RNCC: 5 | RNVC: 2
85-693-1049: RNCC: 6 | RNVC: 9

27 Feb 1986

5340-14-462-8336
Metal Grille

144628336
GR-CE/FL 211241005 REP10: RNCC: 3 | RNVC: 2

4 May 1993

5340-14-459-2954
Bumper

144592954
MAT512-0158: RNCC: 3 | RNVC: 2
906295B: RNCC: 5 | RNVC: 9

19 Nov 1992

5340-14-394-4005
Cover Strip

143944005
366A25-0027-04: RNCC: 3 | RNVC: 2
366A250027-04: RNCC: 5 | RNVC: 2

28 Aug 1984

5340-14-412-3361
Retaining Strap

144123361
880-43-0-005-0: RNCC: 3 | RNVC: 2
85-693-2643: RNCC: 6 | RNVC: 9

8 Oct 1986

5340-14-263-8884
Plug Button

142638884
000-16089-000: RNCC: 3 | RNVC: 2
000-16089-000: RNCC: 5 | RNVC: 2
16089: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-469-0973
Mounting Bracket

144690973
301-578-108-0: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-14-203-6899
Access Cover

142036899
501-150-097-0: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-225-8629
Sliding Door Track

142258629
3160S29-16-230: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-257-0921
Rod End Clevis

142570921
330A27-4230-20: RNCC: 3 | RNVC: 2
330A27-4230-2000: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-392-6378
Webbing Strap

143926378
4-000011-000071: RNCC: 3 | RNVC: 2
4-011-0071: RNCC: 5 | RNVC: 2

7 Apr 1984

5340-14-273-8309
Plug Button

142738309
NO PRIMARY REF14-273-8309: RNCC: 3 | RNVC: 2
28APLAN26048: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-515-4843
Vent Plug

145154843
A015-103-000: RNCC: 3 | RNVC: 2

20 Jul 1999

5340-14-308-1790
Angle Bracket

143081790
23005881: RNCC: 3 | RNVC: 2
23005881-9: RNCC: 5 | RNVC: 2
EB32-27: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-456-3216
Loop Clamp

144563216
E1M-3706-01: RNCC: 3 | RNVC: 2
MAT169-0024F6ROUGE: RNCC: 5 | RNVC: 2
E1M3706-01: RNCC: 5 | RNVC: 2
E1M3706-01: RNCC: 5 | RNVC: 2

25 Jun 1992

5340-14-394-7239
Rim Lock Set

143947239
NO PRIMARY REF14-394-7239: RNCC: 3 | RNVC: 2
6600-04FE024: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-482-9306
Pipe Hanger

144829306
78732-040-080B: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-528-2479
Mounting Plate

145282479
80-301135: RNCC: 3 | RNVC: 2

15 Jan 2002

5340-14-476-5418
Control Rod

144765418
1980-82-2-11: RNCC: 3 | RNVC: 2

20 Jun 1995

5340-14-451-3574
Mounting Plate

144513574
R32F2-6H: RNCC: 3 | RNVC: 2

14 Nov 1991

5340-14-442-3396
Extension Shaft

144423396
APE909008-42527: RNCC: 3 | RNVC: 2
85-693-6496: RNCC: 6 | RNVC: 9

10 Oct 1990

5340-14-401-7359
Rim Lock Set

144017359
536-00: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-330-2573
Access Cover

143302573
1959CA00-10: RNCC: 3 | RNVC: 9
1959CA00-10: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-353-6816
Retaining Strap

143536816
650-403-250-0: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-524-0294
Mounting Bracket

145240294
2483-08-00: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-14-502-3980
Mounting Bracket

145023980
341A69-5072-02: RNCC: 3 | RNVC: 2

11 Dec 1997

5340-14-285-4660
Loop Clamp

142854660
242-85: RNCC: 3 | RNVC: 2
RTM 242-85: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-487-5785
Flush Catch Claw

144875785
385353: RNCC: 3 | RNVC: 2
385353-003: RNCC: 5 | RNVC: 9

10 Apr 1997

5340-14-469-3827
Mounting Bracket

144693827
28-03539: RNCC: 3 | RNVC: 2
5010044799: RNCC: 5 | RNVC: 2
0687.000.2: RNCC: 5 | RNVC: 2

20 Apr 1994

5340-14-514-4803
Shelf Bracket

145144803
45219269: RNCC: 3 | RNVC: 2
45219269: RNCC: 5 | RNVC: 2
5010579485: RNCC: 5 | RNVC: 2
IF-192-0308: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-396-6324
Angle Bracket

143966324
6-2039-010: RNCC: 3 | RNVC: 2
62039010: RNCC: 5 | RNVC: 2
EA1150-1: RNCC: 5 | RNVC: 2

27 Nov 1984

5340-14-493-8395
Bow Handle

144938395
NO PRIMARY REF14-493-8395: RNCC: 3 | RNVC: 2
45072651: RNCC: 5 | RNVC: 9
F300 0T 014 2628: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-373-2789
Corner Brace

143732789
330A22-2023-61: RNCC: 3 | RNVC: 2

21 Oct 1981

5340-14-346-2052
Retaining Strap

143462052
AM183-88: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-490-3083
Mounting Plate

144903083
J05085-01-0320P002: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-367-7015
Bow Handle

143677015
366A58-0100-58: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-478-8373
Loop Clamp

144788373
44036516: RNCC: 3 | RNVC: 2
44036516: RNCC: 5 | RNVC: 9
44036516C: RNCC: 5 | RNVC: 9

23 Nov 1995

5340-14-365-4237
Angle Bracket

143654237
19300558: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-506-9166
Loop Clamp

145069166
WX1168A00: RNCC: 3 | RNVC: 2
2221-0: RNCC: 5 | RNVC: 9

27 May 1998

5340-14-438-0561
Loop Clamp

144380561
815-1-71-224: RNCC: 3 | RNVC: 2

7 Mar 1990

5340-14-450-1411
Loop Clamp

144501411
650-791-074-0: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-365-3208
Arched Cushion

143653208
650-403-028-0: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-357-7207
Retaining Strap

143577207
1005-600000-242-0009-00: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-14-263-1395
Angle Bracket

142631395
2-08710: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-296-7735
Access Cover

142967735
NO PRIMARY REF14-296-7735: RNCC: 3 | RNVC: 2
1214113: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-458-8480
Support Hook

144588480
854-400-363-0: RNCC: 3 | RNVC: 2

5 Nov 1992

5340-14-251-8423
Retaining Strap

142518423
47045: RNCC: 3 | RNVC: 2
31523: RNCC: 3 | RNVC: 2
932040GRIS: RNCC: 3 | RNVC: 2
417045: RNCC: 5 | RNVC: 2
5322677: RNCC: 5 | RNVC: 9
LG31523: RNCC: 5 | RNVC: 9
206-8510-9: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-466-1685
T Bracket

144661685
166084: RNCC: 3 | RNVC: 2
89170186: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-373-8181
Access Cover

143738181
22303167-3: RNCC: 3 | RNVC: 2

13 Nov 1981

5340-14-440-3225
Butt Hinge

144403225
332A63-1634-61: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-427-4961
Retaining Strap

144274961
00306300234: RNCC: 3 | RNVC: 2
3063-2: RNCC: 5 | RNVC: 2

20 Oct 1988

5340-14-479-6177
Leakproof Seal Plug

144796177
3061111: RNCC: 3 | RNVC: 2
703M22X1,5: RNCC: 3 | RNVC: 2
700BM22X1-5: RNCC: 5 | RNVC: 2
GPN703M22X1,5: RNCC: 5 | RNVC: 2

24 Jan 1996

5340-14-481-3661
Mounting Bracket

144813661
10039172: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-296-2130
Quick Release Pin

142962130
121E83-355-00-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-513-4273
Pin Removable Head

145134273
NO PRIMARY REF14-513-4273: RNCC: 3 | RNVC: 2
NNP 5315860701988: RNCC: 5 | RNVC: 9

17 Mar 1999

5340-14-331-7221
Anchor Strap

143317221
121S94-252-09-0: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-532-5002
Rim Lock

145325002
10-065-00: RNCC: 3 | RNVC: 2
SZ10.065.00: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-14-266-0861
Rim Latch Set

142660861
4223: RNCC: 3 | RNVC: 9
50703F21: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-519-2657
Angle Bracket

145192657
3511 111 40331: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-480-3417
Mounting Plate

144803417
39076035: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-478-9217
Mounting Plate

144789217
0024000141: RNCC: 3 | RNVC: 2
89296942: RNCC: 5 | RNVC: 2

30 Nov 1995

5340-14-461-2928
Mounting Bracket

144612928
5000743673: RNCC: 3 | RNVC: 2
89287783: RNCC: 5 | RNVC: 2

3 Mar 1993

5340-14-535-0633
Mounting Bracket

145350633
02000054: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-14-232-2969
Access Cover

142322969
DLT000943: RNCC: 3 | RNVC: 2
DLT00943: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-448-1142
Retaining Strap

144481142
0120720020: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-14-455-7346
Mounting Plate

144557346
46485: RNCC: 3 | RNVC: 2
5044476: RNCC: 5 | RNVC: 9

11 Jun 1992

5340-14-507-2455
Mounting Bracket

145072455
10380585: RNCC: 3 | RNVC: 2

24 Jun 1998

5340-14-214-3845
Bumper

142143845
3217: RNCC: 3 | RNVC: 2
3217: RNCC: 3 | RNVC: 9

1 Jan 1965

5340-14-504-3017
Mounting Bracket

145043017
3699769M91: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-477-0436
Shelf Bracket

144770436
46098105: RNCC: 3 | RNVC: 2

19 Jul 1995

5340-14-383-0074
Anchor Strap

143830074
4770215630: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-543-2899
Clamping Catch

145432899
4FE213AT: RNCC: 3 | RNVC: 2

15 Oct 2004

5340-14-285-0149
Butt Hinge

142850149
1367901: RNCC: 3 | RNVC: 2
3037901: RNCC: 5 | RNVC: 2
KAY400H: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-291-3937
Retaining Strap

142913937
0235221410: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-278-4477
Angle Bracket

142784477
12505475: RNCC: 3 | RNVC: 2
12505475: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-551-6476
Mounting Bracket

145516476
CMI316: RNCC: 3 | RNVC: 2

11 Oct 2006

5340-14-396-5231
Angle Bracket

143965231
214012: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-514-4107
Angle Bracket

145144107
RA1M701346103: RNCC: 3 | RNVC: 2

20 May 1999

5340-14-411-4026
Wiring Harness

144114026
A11A704101020: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-547-4552
Mounting Plate

145474552
5010399258: RNCC: 3 | RNVC: 2

13 Oct 2005

5340-14-482-1329
Webbing Strap

144821329
TID27998: RNCC: 3 | RNVC: 2

20 Jun 1996

5340-14-530-8729
Mounting Plate

145308729
5804212E00: RNCC: 3 | RNVC: 2

10 Jul 2002

5340-14-500-3489
Control Rod

145003489
D61351300000: RNCC: 3 | RNVC: 2
F300 0T 024 3580: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-500-5429
Mounting Bracket

145005429
6796: RNCC: 3 | RNVC: 2
F300 0T 024 5605: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-291-1611
Mending Plate

142911611
10249: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-547-7283
Runner

145477283
8046410F00: RNCC: 3 | RNVC: 2

7 Nov 2005

5340-14-334-4615
Webbing Strap

143344615
120140: RNCC: 3 | RNVC: 2

1 Jun 1976

5340-14-335-8737
Pipe Hanger

143358737
002216080P: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-339-3461
Retaining Strap

143393461
192714: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-385-4120
Mounting Plate

143854120
0285320050: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-500-3729
Mounting Plate

145003729
E62101100009: RNCC: 3 | RNVC: 2
F300 0T 024 3829: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-478-0911
Mounting Plate

144780911
1106910L00: RNCC: 3 | RNVC: 2
224321: RNCC: 5 | RNVC: 2

11 Oct 1995

5340-14-517-0796
Angle Bracket

145170796
MP1814F00: RNCC: 3 | RNVC: 2

3 Nov 1999

5340-14-515-7897
Pipe Hanger

145157897
941276: RNCC: 3 | RNVC: 2

4 Aug 1999

5340-14-537-4698
Leakproof Seal Plug

145374698
6501MCP240013: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-454-0743
Retaining Strap

144540743
16130176: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-14-500-3685
Mounting Bracket

145003685
C61602100000: RNCC: 3 | RNVC: 2
F300 0T 024 3785: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-521-4120
Mounting Bracket

145214120
10512296: RNCC: 3 | RNVC: 2

26 Jul 2000

5340-14-460-0831
Pipe Hanger

144600831
PM1A726152220: RNCC: 3 | RNVC: 2
PM1A726152220: RNCC: 5 | RNVC: 2

7 Jan 1993

5340-14-519-9720
Bumper

145199720
4166838: RNCC: 3 | RNVC: 2
4166838: RNCC: 5 | RNVC: 9

28 Apr 2000

5340-14-431-7017
Bridge Clamp

144317017
000200350100: RNCC: 3 | RNVC: 2

28 Apr 1989

5340-14-488-6868
Mounting Bracket

144886868
25617642: RNCC: 3 | RNVC: 2
2-561764-2: RNCC: 5 | RNVC: 2

28 May 1997

5340-14-552-1060
Mounting Plate

145521060
0064581800: RNCC: 3 | RNVC: 2

27 Nov 2006

5340-14-461-9808
Section Block Clamp

144619808
T700A7170022100: RNCC: 3 | RNVC: 2

31 Mar 1993

NSN 5340-14-486-3389 144863389 CLEVIS,ROD END

5340-14-486-3389
Rod End Clevis

144863389
00739-3: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-315-7822
Handle Grip

143157822
773-411-502FF10DET5: RNCC: 3 | RNVC: 2
773-411-502FF10DET5: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-446-0105
Mounting Plate

144460105
41-39044: RNCC: 3 | RNVC: 2
41-39044: RNCC: 5 | RNVC: 9

4 Mar 1991

5340-14-299-3353
Mending Plate

142993353
MY20551-8507: RNCC: 3 | RNVC: 2
MY20-551-85-07: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-533-5386
Angle Bracket

145335386
192E354-00: RNCC: 3 | RNVC: 2

10 Feb 2003

5340-14-361-2715
Rod End Clevis

143612715
X25427-86: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-254-0551
Access Cover

142540551
149-03-03-06: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-265-1352
Loop Clamp

142651352
55218-206D507DB: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-432-1712
Mounting Plate

144321712
3511 265 06341: RNCC: 3 | RNVC: 2
3511-265-06341: RNCC: 5 | RNVC: 2
8830-4: RNCC: 5 | RNVC: 9

24 May 1989

5340-14-508-6600
Surface Bolt

145086600
JGA06-37: RNCC: 3 | RNVC: 2

23 Sep 1998

5340-14-529-5767
Mounting Bracket

145295767
330A87-3141-00: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-324-2245
Access Cover

143242245
35083: RNCC: 3 | RNVC: 2
190124: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-386-8650
Angle Bracket

143868650
AEAV000101-5110: RNCC: 3 | RNVC: 2
85-692-5348: RNCC: 6 | RNVC: 9

24 Aug 1983

5340-14-467-7440
Mounting Bracket

144677440
312-15819-001: RNCC: 3 | RNVC: 2

27 Jan 1994

5340-14-467-9228
Angle Bracket

144679228
312-12811-001: RNCC: 3 | RNVC: 2

2 Feb 1994

5340-14-482-8435
Sliding Door Track

144828435
332A58-4658-01: RNCC: 3 | RNVC: 2

25 Jul 1996

5340-14-437-4515
Mounting Bracket

144374515
332A61-2337-04: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-343-8327
Angle Bracket

143438327
1078-01-02A: RNCC: 3 | RNVC: 2
1078-01-02A: RNCC: 5 | RNVC: 9

13 Jul 1977

5340-14-268-8572
Mounting Plate

142688572
ST104M432-2P64: RNCC: 3 | RNVC: 2
STL156674: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-495-6184
Mounting Bracket

144956184
R53203-06: RNCC: 3 | RNVC: 2
F300 0T 019 5461: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-346-2009
Retaining Strap

143462009
AM182-6B: RNCC: 3 | RNVC: 2
7902015145: RNCC: 5 | RNVC: 2
524-14-009: RNCC: 5 | RNVC: 2
524-14-009: RNCC: 5 | RNVC: 9

12 Dec 1977

5340-14-506-8491
Angle Bracket

145068491
A50424: RNCC: 3 | RNVC: 2
A50432-635617: RNCC: 3 | RNVC: 2

27 May 1998

5340-14-396-6557
Loop Clamp

143966557
785-0091: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-444-0859
Retaining Strap

144440859
955205020: RNCC: 3 | RNVC: 2
955222-050BGL: RNCC: 5 | RNVC: 9

18 Dec 1990

5340-14-461-6214
Bridge Clamp

144616214
1713-16: RNCC: 3 | RNVC: 2
0043172641: RNCC: 5 | RNVC: 2
0030059: RNCC: 5 | RNVC: 2
9401713169: RNCC: 5 | RNVC: 2
9401713169: RNCC: 5 | RNVC: 9

17 Mar 1993

5340-14-331-3097
Utility Access Door

143313097
NO PRIMARY REF14-331-3097: RNCC: 3 | RNVC: 2
M5942-11: RNCC: 5 | RNVC: 9
594-211: RNCC: 5 | RNVC: 9
728-021: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-532-0675
Bow Handle

145320675
03-725-311: RNCC: 3 | RNVC: 2
SZ03.725.311: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-282-4687
Mending Plate

142824687
6218-0416: RNCC: 3 | RNVC: 2
6218-0416: RNCC: 5 | RNVC: 2
6218-0416: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-552-7134
Mounting Bracket

145527134
0027588: RNCC: 3 | RNVC: 2

25 Jan 2007

5340-14-457-8579
Angle Bracket

144578579
T344AC87: RNCC: 3 | RNVC: 2
5046358: RNCC: 5 | RNVC: 9
T344AC87: RNCC: 5 | RNVC: 9

24 Sep 1992

5340-14-341-0820
Butt Hinge

143410820
16397644: RNCC: 3 | RNVC: 2
16397644: RNCC: 3 | RNVC: 9

16 Mar 1977

5340-14-434-2695
Expansion Plug

144342695
554522: RNCC: 3 | RNVC: 2

19 Sep 1989

5340-14-539-2152
Swivel Caster

145392152
61030779AA: RNCC: 3 | RNVC: 2

11 Dec 2003

5340-14-305-2637
Tubular Fairlead

143052637
000-0299: RNCC: 3 | RNVC: 2
30000299: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-465-7684
Loop Clamp

144657684
51311905063: RNCC: 3 | RNVC: 2
Z00.N7141380063: RNCC: 5 | RNVC: 2
251906300: RNCC: 5 | RNVC: 2
25P63: RNCC: 5 | RNVC: 2

14 Oct 1993

5340-14-545-1141
Access Cover

145451141
TS154852Y00: RNCC: 3 | RNVC: 2

18 Mar 2005

5340-14-552-4740
Block Clamp

145524740
S257A7511282: RNCC: 3 | RNVC: 2

8 Jan 2007

5340-14-413-9627
Retaining Strap

144139627
ST400S60P150: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-350-3990
Angle Bracket

143503990
0320-29: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-427-9252
Loop Clamp

144279252
376057: RNCC: 3 | RNVC: 2

23 Nov 1988

5340-14-266-3996
Mending Plate

142663996
153019: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-365-1331
Access Cover

143651331
C17602: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-14-475-8708
Threaded Rod End

144758708
1035034M00: RNCC: 3 | RNVC: 2

10 May 1995

5340-14-544-9972
Bumper

145449972
708450: RNCC: 3 | RNVC: 2

14 Mar 2005

5340-14-475-3577
Arched Cushion

144753577
2862F75: RNCC: 3 | RNVC: 2

29 Mar 1995

5340-14-485-9965
Angle Bracket

144859965
PA01PD030112: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-14-448-1217
Mounting Plate

144481217
0211400040: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-14-526-0451
Mounting Bracket

145260451
10605151: RNCC: 3 | RNVC: 2

28 Jun 2001

5340-14-551-6094
Access Cover

145516094
3CW2139: RNCC: 3 | RNVC: 2

9 Oct 2006

5340-14-519-6091
Mounting Plate

145196091
C632A2161601: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-334-4515
Mending Plate

143344515
161658: RNCC: 3 | RNVC: 2

1 Jun 1976

5340-14-451-2247
Angle Bracket

144512247
PM1A715108701: RNCC: 3 | RNVC: 2
PM1A715108701: RNCC: 5 | RNVC: 2

6 Nov 1991

5340-14-366-9343
Mending Plate

143669343
003270080P: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-439-4163
Cover Strip

144394163
DA2C721225120: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-523-7362
Mounting Plate

145237362
X5451550: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-353-4782
Runner

143534782
16448314: RNCC: 3 | RNVC: 2
16448314: RNCC: 3 | RNVC: 9

16 Jan 1979

5340-14-516-7362
Loop Clamp

145167362
8304049: RNCC: 3 | RNVC: 2
Y00005522: RNCC: 3 | RNVC: 2
Y00005522: RNCC: 5 | RNVC: 9

13 Oct 1999

5340-14-543-4491
Mounting Bracket

145434491
072922987000003: RNCC: 3 | RNVC: 2

30 Oct 2004

5340-14-501-8984
Runner

145018984
S7072986: RNCC: 3 | RNVC: 2

19 Nov 1997

5340-14-380-7898
Access Cover

143807898
16985500: RNCC: 3 | RNVC: 2

14 Dec 1982

5340-14-514-1508
Bow Handle

145141508
S94310: RNCC: 3 | RNVC: 2

28 Apr 1999

5340-14-396-3095
Clamping Catch

143963095
501357: RNCC: 3 | RNVC: 2
GP09PVGAMC2420IR: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-378-9060
Retaining Strap

143789060
5000013519: RNCC: 3 | RNVC: 2
5000013519: RNCC: 5 | RNVC: 9

6 Sep 1982

5340-14-413-9645
Retaining Strap

144139645
ST400S60P169: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-554-3868
Mounting Bracket

145543868
T533A1140145: RNCC: 3 | RNVC: 2

27 Jun 2007

5340-14-366-2819
Angle Bracket

143662819
A21A221176241: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-14-466-3200
Mounting Plate

144663200
45534667: RNCC: 3 | RNVC: 2

3 Nov 1993

5340-14-353-2167
Butt Hinge

143532167
356002100002: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-342-4681
Detent Plunger

143424681
STEL124: RNCC: 3 | RNVC: 2

16 May 1977

5340-14-346-7227
Block Clamp

143467227
A11A704106010: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-550-9180
Angle Bracket

145509180
RA1B701876611A1: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-478-1617
Access Cover

144781617
CCN301-530-500A1: RNCC: 3 | RNVC: 2
CCN301530500A1: RNCC: 5 | RNVC: 2

11 Oct 1995

5340-14-312-9659
Angle Bracket

143129659
NO PRIMARY REF14-312-9659: RNCC: 3 | RNVC: 2
TB1904M56EQUERREDESABLIERE: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-364-5880
Anchor Strap

143645880
NO PRIMARY REF14-364-5880: RNCC: 3 | RNVC: 2
5000498739: RNCC: 5 | RNVC: 2
532-21600: RNCC: 5 | RNVC: 9
5000498739: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-549-7797
Bumper

145497797
EA1M110-51: RNCC: 3 | RNVC: 2

11 May 2006

5340-14-341-1999
Loop Clamp

143411999
M3E707-86: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-546-2601
Access Cover

145462601
190101455-20: RNCC: 3 | RNVC: 2
190101455-20: RNCC: 5 | RNVC: 2

21 Jun 2005

5340-14-451-3563
Mounting Plate

144513563
R32Z4-6H: RNCC: 3 | RNVC: 2

14 Nov 1991

5340-14-413-6953
Anchor Strap

144136953
T0P7L902: RNCC: 3 | RNVC: 2
TOP7L902: RNCC: 5 | RNVC: 2

15 Jan 1987

5340-14-504-8638
Access Cover

145048638
4128310020: RNCC: 3 | RNVC: 2
5001822184: RNCC: 3 | RNVC: 2

6 Mar 1998

5340-14-207-0460
Butt Hinge

142070460
0946400655: RNCC: 3 | RNVC: 2
0946400655: RNCC: 5 | RNVC: 9
946400655: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-322-0797
Mending Plate

143220797
90286: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-535-2623
Angle Bracket

145352623
RA1M701926131N1: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-474-5938
Mounting Bracket

144745938
0322718710: RNCC: 3 | RNVC: 2

22 Feb 1995

5340-14-451-7760
Butt Hinge

144517760
6544: RNCC: 3 | RNVC: 2

4 Dec 1991

5340-14-476-0923
Runner

144760923
222-3018-472: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-360-5683
Retaining Strap

143605683
16379916: RNCC: 3 | RNVC: 2
16379916: RNCC: 5 | RNVC: 9
16379916: RNCC: 5 | RNVC: 9

19 Dec 1979

5340-14-426-7812
Retaining Strap

144267812
1130000302: RNCC: 3 | RNVC: 9

22 Sep 1988

5340-14-522-5947
Mounting Plate

145225947
2646E076: RNCC: 3 | RNVC: 2

8 Nov 2000

5340-14-270-9152
Loop Clamp

142709152
201174: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-543-6448
Mounting Bracket

145436448
AMPC GENE E228310: RNCC: 3 | RNVC: 2

30 Nov 2004

5340-14-439-4005
Mounting Bracket

144394005
DA2C201941: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-379-0090
Plug Button

143790090
108460: RNCC: 3 | RNVC: 2
91456029: RNCC: 5 | RNVC: 2
91456029: RNCC: 5 | RNVC: 2

6 Sep 1982

5340-14-533-1566
Mounting Bracket

145331566
S261A1013101: RNCC: 3 | RNVC: 2

23 Jan 2003

5340-14-464-3574
Angle Bracket

144643574
0662962S00: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-361-1750
Rod End Clevis

143611750
BAZ94378: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-463-3839
Angle Bracket

144633839
10050298: RNCC: 3 | RNVC: 2

9 Jun 1993

5340-14-515-2304
Angle Bracket

145152304
1704462420: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-512-5787
Access Cover

145125787
3BM02301AAAA: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-497-5574
Mounting Bracket

144975574
10437078: RNCC: 3 | RNVC: 2
F300 0T 023 3563: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-512-5728
Mounting Bracket

145125728
38730541: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-533-8414
Mounting Bracket

145338414
46945603: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-406-0686
Mending Plate

144060686
3511 190 98121: RNCC: 3 | RNVC: 2
RAR3451: RNCC: 5 | RNVC: 2

8 Jan 1986

5340-14-463-3664
Corner Brace

144633664
16292542: RNCC: 3 | RNVC: 2
16292542: RNCC: 5 | RNVC: 9

9 Jun 1993

5340-14-305-2774
Retaining Strap

143052774
26253: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-402-2029
Plug Button

144022029
410551: RNCC: 3 | RNVC: 2
410551: RNCC: 5 | RNVC: 2
410551: RNCC: 5 | RNVC: 9

26 Jun 1985

5340-14-380-7712
Access Cover

143807712
065U10-628942E: RNCC: 3 | RNVC: 2

14 Dec 1982

5340-14-351-1353
Access Cover

143511353
210894: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-528-1350
Swivel Caster

145281350
R2109-8FPAB: RNCC: 3 | RNVC: 9
R2109-8FPAB: RNCC: 5 | RNVC: 2

20 Dec 2001

5340-14-439-8221
Mounting Plate

144398221
332A55-1222-00: RNCC: 3 | RNVC: 2

23 May 1990

5340-14-335-2546
Runner

143352546
M208-33032: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-349-8324
Leaf Spring

143498324
M208-47011: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-514-4749
Angle Bracket

145144749
47138666: RNCC: 3 | RNVC: 2
47138666: RNCC: 5 | RNVC: 2
IF-192-0454: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-489-6484
Mounting Bracket

144896484
332A52-1017-1101: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-398-6438
Webbing Strap

143986438
E60-6M-B-307-1-30CM: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-330-2651
Angle Bracket

143302651
321A51-0127-42: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-472-4817
Access Cover

144724817
132E458-00: RNCC: 3 | RNVC: 2
132E458-00: RNCC: 5 | RNVC: 9

26 Oct 1994

5340-14-456-8719
Arched Cushion

144568719
MAT169-0012F20DE11: RNCC: 3 | RNVC: 2

24 Jul 1992

5340-14-441-7123
Loop Clamp

144417123
ASNA0021-25G30: RNCC: 3 | RNVC: 2
A0021-25G30: RNCC: 5 | RNVC: 2

12 Sep 1990

5340-14-465-2992
Corner Brace

144652992
365A81-0301-38: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-257-0923
Rod End Clevis

142570923
330A27-4232-20: RNCC: 3 | RNVC: 2
330A27-4232-2000: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-283-2556
Rod End Clevis

142832556
121A21-650-10-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-473-8140
Mounting Bracket

144738140
332A22-1500-2001: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-432-8045
Butt Hinge

144328045
262-12-23160-01: RNCC: 3 | RNVC: 2
85-693-8472: RNCC: 6 | RNVC: 9

27 Jun 1989

5340-14-301-5406
Rim Lock Set

143015406
NO PRIMARY REF14-301-5406: RNCC: 3 | RNVC: 2
631D: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-541-5245
Angle Bracket

145415245
1091554-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-485-7301
Access Cover

144857301
332A62-1328-00: RNCC: 3 | RNVC: 2

6 Feb 1997

5340-14-442-0031
Mounting Plate

144420031
332P64-1544-01: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-452-0501
Mounting Bracket

144520501
GA63536: RNCC: 3 | RNVC: 2
85-694-0348: RNCC: 6 | RNVC: 9

18 Dec 1991

5340-14-290-2336
Retaining Strap

142902336
330A75-5135-20: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-212-9495
Loop Clamp

142129495
3130S73-27-350: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-517-3386
Angle Bracket

145173386
047-32-109: RNCC: 3 | RNVC: 2
047-32-109: RNCC: 5 | RNVC: 2

2 Dec 1999

5340-14-277-7122
Leaf Spring

142777122
0731722100: RNCC: 3 | RNVC: 2
0996110200: RNCC: 5 | RNVC: 2
0996110200: RNCC: 5 | RNVC: 2
099-611-0020: RNCC: 5 | RNVC: 2
0996110200: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-337-5500
Turnbuckle Body

143375500
R126-07-14X150CC: RNCC: 2 | RNVC: 2

7 Oct 1976

5340-14-467-8483
Rod End Clevis

144678483
A64-416-00-17: RNCC: 3 | RNVC: 2
89404925: RNCC: 5 | RNVC: 2

27 Jan 1994

5340-14-413-9926
Armature Stop

144139926
13-201-145-12: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-341-8359
Access Cover

143418359
M3B702-860-02: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-467-4296
Mounting Plate

144674296
160R742225-05: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-14-501-5322
Retaining Clip

145015322
6997J6: RNCC: 3 | RNVC: 2
6997-J6: RNCC: 5 | RNVC: 2

3 Nov 1997

5340-14-382-8219
Angle Bracket

143828219
NO PRIMARY REF14-382-8219: RNCC: 3 | RNVC: 2
RF72RF8102: RNCC: 5 | RNVC: 2

17 Feb 1983

5340-14-464-3499
Angle Bracket

144643499
705808-00: RNCC: 3 | RNVC: 2
89297828: RNCC: 5 | RNVC: 2

28 Jul 1993

5340-14-417-3810
Loop Clamp

144173810
SPV106PA-DPAS: RNCC: 3 | RNVC: 2

7 Jul 1987

5340-14-467-9238
Cover Strip

144679238
312-02052-601: RNCC: 3 | RNVC: 2

2 Feb 1994

5340-14-553-5739
Mounting Plate

145535739
BBCE-01H6000: RNCC: 3 | RNVC: 2

18 Apr 2007

5340-14-485-0683
Mounting Bracket

144850683
332A41-0420-01: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-14-490-3846
Mounting Plate

144903846
NO PRIMARY REF14-490-3846: RNCC: 3 | RNVC: 2
NNP5340844554407: RNCC: 5 | RNVC: 9

24 Sep 1997

5340-14-482-8546
Locking Stay

144828546
826-002-000: RNCC: 3 | RNVC: 9

27 Jul 1996

5340-14-377-5845
Access Cover

143775845
A967231: RNCC: 3 | RNVC: 2
A96723-1: RNCC: 3 | RNVC: 2
91372539: RNCC: 5 | RNVC: 2
A967231: RNCC: 5 | RNVC: 2
A96723-1: RNCC: 5 | RNVC: 9
A96723-1: RNCC: 5 | RNVC: 9

10 Jun 1982

5340-14-530-5428
Magnetic Catch

145305428
SAV DIV0311/8695: RNCC: 3 | RNVC: 2
SYB5156: RNCC: 5 | RNVC: 2

20 Jun 2002

5340-14-204-1199
Loop Clamp

142041199
3130S73-71-681: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-387-7693
Runner

143877693
SR159-2M351P13: RNCC: 3 | RNVC: 2
ST159-2M351P13B: RNCC: 5 | RNVC: 2

12 Oct 1983

5340-14-279-1692
Detent Plunger

142791692
D1512-176: RNCC: 3 | RNVC: 2
D1512-176: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-264-1746
Loop Clamp

142641746
55219-316D507DB: RNCC: 3 | RNVC: 2
55219-316-001DB: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-264-1747
Loop Clamp

142641747
55217-240ADL: RNCC: 3 | RNVC: 2
55217-240-000ADL: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-457-0341
Loop Clamp

144570341
75-421-33-90-15183-3: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-14-573-2142
Utility Resilient Mount

145732142
HH11-40-02TIM: RNCC: 3 | RNVC: 2

24 Sep 2012

5340-14-314-5666
Pipe Hanger

143145666
E95000-007: RNCC: 3 | RNVC: 2
8X8-408EXTRAPLAT: RNCC: 5 | RNVC: 2
95408MP: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-374-6354
Access Cover

143746354
20-6-01-4: RNCC: 3 | RNVC: 2
EWK20-6-01-4: RNCC: 5 | RNVC: 2

30 Jan 1982

5340-14-523-1930
Utility Access Door

145231930
PEC201-200-300: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-469-6840
Pipe Hanger

144696840
78733-020-036B: RNCC: 3 | RNVC: 2

4 May 1994

5340-14-326-2064
Retaining Strap

143262064
J00650-01-0430P005: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-485-0699
Mounting Bracket

144850699
332A52-1099-20: RNCC: 3 | RNVC: 2
332A52109920: RNCC: 5 | RNVC: 2

19 Dec 1996

5340-14-522-5182
Shimmy Damper

145225182
358G4-05: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-14-527-1920
Bumper

145271920
21365053-00: RNCC: 3 | RNVC: 2
21365053-3: RNCC: 5 | RNVC: 2

10 Oct 2001

5340-14-373-1070
Angle Bracket

143731070
330A58-3616-21: RNCC: 3 | RNVC: 2

21 Sep 1981

5340-14-487-5585
Mounting Plate

144875585
78787-050B13F: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-469-8226
Bumper

144698226
5-800-7009: RNCC: 3 | RNVC: 2
91714040: RNCC: 5 | RNVC: 2

10 May 1994

5340-14-403-7054
Access Cover

144037054
A46447-14: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-351-7185
Bow Handle

143517185
462-10835-000: RNCC: 3 | RNVC: 2
28011662: RNCC: 5 | RNVC: 2

12 Sep 1978

5340-14-477-0241
Runner

144770241
23826-00: RNCC: 3 | RNVC: 9
1110259R00: RNCC: 5 | RNVC: 2

17 Jul 1995

5340-14-501-4364
Mounting Bracket

145014364
460551: RNCC: 3 | RNVC: 2
132088IP204B: RNCC: 5 | RNVC: 2
460551-001: RNCC: 5 | RNVC: 9

29 Oct 1997

5340-14-493-6047
Mounting Bracket

144936047
M589-115111: RNCC: 3 | RNVC: 2
F300 0T 013 8327: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-510-2363
Access Cover

145102363
FA2C232-31-810RS1: RNCC: 3 | RNVC: 2
1560AA8017074: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-464-8904
Loop Clamp

144648904
PE27021-2538: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-296-8926
Snap Hook

142968926
22214-001: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-389-5457
Sliding Door Track

143895457
365A87-3034-1001: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-454-5358
Mounting Plate

144545358
2085-05-022: RNCC: 3 | RNVC: 2
89411705: RNCC: 5 | RNVC: 9

2 Apr 1992

5340-14-517-9045
Plug Button

145179045
IF232-302: RNCC: 3 | RNVC: 9

17 Jan 2000

5340-14-509-2407
Mounting Bracket

145092407
460422: RNCC: 3 | RNVC: 2
460422-001: RNCC: 5 | RNVC: 9

21 Oct 1998

5340-14-472-8741
Cover Strip

144728741
332A25-1298-20: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-469-5380
Threaded Rod End

144695380
350A27-3123-20: RNCC: 3 | RNVC: 2

27 Apr 1994

5340-14-441-6341
Webbing Strap

144416341
332A91-2415-14: RNCC: 3 | RNVC: 2

5 Sep 1990

5340-14-307-6007
Loop Clamp

143076007
E4P280-24-895: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-419-7784
Rod End Clevis

144197784
160H712884-07: RNCC: 3 | RNVC: 2

5 Nov 1987

5340-14-234-5714
Rod End Clevis

142345714
321A21-0474-20: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-294-7992
Rod End Clevis

142947992
E4M191-12-822: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-413-9750
Angle Bracket

144139750
ST406M52P457: RNCC: 3 | RNVC: 2
50-1019: RNCC: 5 | RNVC: 2

22 Jan 1987

5340-14-501-1507
Access Cover

145011507
014-010-173: RNCC: 3 | RNVC: 2
014.010.173: RNCC: 3 | RNVC: 2
F300 0T 025 1909: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-237-4805
Loop Clamp

142374805
NSE552-12-125: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-434-8168
Mounting Bracket

144348168
332A31-1452-21: RNCC: 3 | RNVC: 2

4 Oct 1989

5340-14-432-1715
Angle Bracket

144321715
NO PRIMARY REF14-432-1715: RNCC: 3 | RNVC: 2
8842-4B: RNCC: 5 | RNVC: 9

24 May 1989

5340-14-341-8362
Access Cover

143418362
M3B703-20-02: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-237-1433
Loop Clamp

142371433
NO PRIMARY REF14-237-1433: RNCC: 3 | RNVC: 2
000289007P: RNCC: 5 | RNVC: 2
TID3298: RNCC: 5 | RNVC: 2
87206: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-302-8854
Control Rod

143028854
NO PRIMARY REF14-302-8854: RNCC: 3 | RNVC: 2
23843DETF: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-495-7542
Angle Bracket

144957542
NO PRIMARY REF14-495-7542: RNCC: 3 | RNVC: 2
011030110000: RNCC: 5 | RNVC: 2
F300 0T 020 0328: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-459-4585
Spring Holder

144594585
3274-9132816-00: RNCC: 3 | RNVC: 9

1 Dec 1992

5340-14-358-3882
Bumper

143583882
EIR000-44: RNCC: 3 | RNVC: 2
91302139: RNCC: 5 | RNVC: 2

13 Aug 1979

5340-14-342-1404
Pipe Hanger

143421404
321A75-0152-04: RNCC: 3 | RNVC: 2
85-688-3006: RNCC: 6 | RNVC: 9

14 Apr 1977

5340-14-458-7347
Arched Cushion

144587347
MAT169-0012F21DE19: RNCC: 3 | RNVC: 2

29 Oct 1992

5340-14-393-5625
Loop Clamp

143935625
MN7062RBF3/3REP1: RNCC: 3 | RNVC: 9
MN7062RBF3-3REP1: RNCC: 5 | RNVC: 9

7 Apr 1984

5340-14-335-0537
Handwheel

143350537
MAT137-008F5ACIER: RNCC: 3 | RNVC: 2
GSM137-007F31ACIER: RNCC: 5 | RNVC: 2
GSM137-07F31ACIER: RNCC: 5 | RNVC: 2

2 Jun 1976

5340-14-442-0119
Blank Panel

144420119
332P66-1408-24: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-448-7118
Runner

144487118
A03037-10-2010P012: RNCC: 3 | RNVC: 2

4 Jul 1991

5340-14-503-1139
Retaining Strap

145031139
A29321-5R3: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-400-1687
Butt Hinge

144001687
FD1C234-14823: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-419-6774
Angle Bracket

144196774
ETD024050612020: RNCC: 3 | RNVC: 2
85-693-6346: RNCC: 6 | RNVC: 9

2 Nov 1987

5340-14-476-6079
Loop Clamp

144766079
01140024010: RNCC: 3 | RNVC: 2
114024-10: RNCC: 5 | RNVC: 2
3597470002643: RNCC: 5 | RNVC: 2

21 Jun 1995

5340-14-356-0681
Loop Clamp

143560681
EA1M701-55-08: RNCC: 3 | RNVC: 2

5 Apr 1979

5340-14-361-2613
Mounting Plate

143612613
S12242-83: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-441-6322
Webbing Strap

144416322
332A91-2403-10: RNCC: 3 | RNVC: 2

5 Sep 1990

5340-14-533-4150
Mounting Bracket

145334150
P22-010753: RNCC: 3 | RNVC: 2
A22-010753: RNCC: 5 | RNVC: 2

5 Feb 2003

5340-14-344-7033
Synchro Clamp

143447033
EA1M713-40: RNCC: 3 | RNVC: 2

9 Sep 1977

5340-14-529-4528
Mounting Plate

145294528
Z95-100P: RNCC: 3 | RNVC: 2
Z95-100P: RNCC: 5 | RNVC: 9

29 Mar 2002

5340-14-454-2803
Bumper

144542803
3704DME106-0005: RNCC: 3 | RNVC: 2

26 Mar 1992

5340-14-336-4132
Angle Bracket

143364132
341A55-5001-20: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-487-5560
Mounting Plate

144875560
78785-050-15F: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-529-1577
Mounting Plate

145291577
457-12410-000: RNCC: 3 | RNVC: 2

13 Mar 2002

5340-14-511-6337
Pipe Hanger

145116337
78733-024-025B: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-389-8291
Angle Bracket

143898291
837049/004: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-369-1847
Rigid Caster

143691847
365A91-5410-31: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-503-4471
Retaining Strap

145034471
NO PRIMARY REF14-503-4471: RNCC: 3 | RNVC: 2
NNP5340844553426: RNCC: 5 | RNVC: 9

14 Jan 1998

5340-14-466-7449
Access Cover

144667449
3511 193 12061: RNCC: 3 | RNVC: 2
3511-193-12061: RNCC: 5 | RNVC: 2

24 Nov 1993

5340-14-468-0597
Cover Strip

144680597
312-15481-001: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-316-4607
Loop Clamp

143164607
BN418-501F11D2: RNCC: 3 | RNVC: 2
6200034: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-464-2111
Cover Strip

144642111
1TS4-11-50C: RNCC: 3 | RNVC: 2
18007112006: RNCC: 3 | RNVC: 2

27 Jul 1993

5340-14-297-9603
Butt Hinge

142979603
AE70-550-3P62: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-458-1532
Mounting Plate

144581532
8422: RNCC: 3 | RNVC: 2
8422: RNCC: 5 | RNVC: 9
85-694-3432: RNCC: 6 | RNVC: 9

8 Oct 1992

5340-14-393-6059
Butt Hinge

143936059
NO PRIMARY REF14-393-6059: RNCC: 3 | RNVC: 2
0329-411-202-04: RNCC: 5 | RNVC: 9

7 Jun 1984

5340-14-456-3214
Loop Clamp

144563214
E1M-3699-01: RNCC: 3 | RNVC: 2
E1M3699-01: RNCC: 5 | RNVC: 2
MAT169-0024F4ROUGE: RNCC: 5 | RNVC: 2
E1M3699-01: RNCC: 5 | RNVC: 2

25 Jun 1992

5340-14-341-5461
Access Cover

143415461
5200-051: RNCC: 3 | RNVC: 2
5200-051: RNCC: 5 | RNVC: 2

16 Mar 1977

5340-14-542-0094
Mounting Plate

145420094
20044-157: RNCC: 3 | RNVC: 2
502118001016A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-265-1345
Loop Clamp

142651345
55217-208ADL: RNCC: 3 | RNVC: 2
55217-208-000ADL: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-301-4559
Butt Hinge

143014559
J36-192-100LAIT0N: RNCC: 2 | RNVC: 2

1 Jan 1973

5340-14-249-7612
Webbing Strap

142497612
NO PRIMARY REF14-249-7612: RNCC: 3 | RNVC: 2
801ZT168: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-368-0175
Detent Plunger

143680175
B0188-033F10: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-428-8879
Clamping Catch

144288879
355A58-3043-00: RNCC: 3 | RNVC: 2

22 Dec 1988

5340-14-541-3650
Access Cover

145413650
302-0708: RNCC: 3 | RNVC: 2

3 Jun 2004

5340-14-445-2390
Bail Handle

144452390
PR.312-IB: RNCC: 3 | RNVC: 2
PR312IB: RNCC: 5 | RNVC: 2

6 Feb 1991

5340-14-405-5241
Detent Plunger

144055241
J05190-00-0340P011: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-543-2343
Mounting Bracket

145432343
128-20-635-01: RNCC: 3 | RNVC: 2

7 Oct 2004

5340-14-204-8781
Loop Clamp

142048781
511153050101: RNCC: 3 | RNVC: 2
BR791-10: RNCC: 5 | RNVC: 2
A0021-35S10: RNCC: 5 | RNVC: 2
35S10: RNCC: 5 | RNVC: 2
A0021-35S10: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-14-375-9843
Angle Bracket

143759843
11-717-100: RNCC: 3 | RNVC: 2
11-717-100: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-293-5173
Bail Handle

142935173
NO PRIMARY REF14-293-5173: RNCC: 3 | RNVC: 2
19412107: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-238-3386
Hammock Hook

142383386
NO PRIMARY REF14-238-3386: RNCC: 3 | RNVC: 2
156444: RNCC: 5 | RNVC: 9
95354: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-421-1284
Clamping Catch

144211284
GP.29-ZB: RNCC: 3 | RNVC: 2
GP29ZB: RNCC: 5 | RNVC: 2

6 Jan 1988

5340-14-257-2248
Lock Bolt

142572248
330A21-2518-20: RNCC: 3 | RNVC: 2
330A21-2518-2000: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-364-0070
Mending Plate

143640070
413-06663-000: RNCC: 3 | RNVC: 2

7 Mar 1996

Load More Results