What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 129 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 129 of 446

5340-14-461-4797
Angle Bracket

144614797
20055953: RNCC: 3 | RNVC: 2

10 Mar 1993

5340-14-488-6703
Mounting Plate

144886703
3BT01424AAAA: RNCC: 3 | RNVC: 2
3BT01424AAAA: RNCC: 5 | RNVC: 9

28 May 1997

5340-14-489-4366
Mounting Bracket

144894366
3BM02300AAAA: RNCC: 3 | RNVC: 2
3BM02300AAAA: RNCC: 5 | RNVC: 9

23 Jul 1997

5340-14-411-5025
Loop Clamp

144115025
01023A2132X3: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-521-1143
Swivel Caster

145211143
926160R: RNCC: 3 | RNVC: 2

11 Jul 2000

5340-14-471-6628
Webbing Strap

144716628
7525262: RNCC: 3 | RNVC: 2
0C07525262: RNCC: 5 | RNVC: 2
5001821593: RNCC: 5 | RNVC: 2

7 Sep 1994

5340-14-540-3620
Mounting Plate

145403620
NNP4030860325478: RNCC: 3 | RNVC: 2

18 Mar 2004

5340-14-325-9099
Key Blank

143259099
25511B3X6XC38: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-546-3282
Mounting Bracket

145463282
10645816001: RNCC: 3 | RNVC: 2

25 Jun 2005

5340-14-551-3531
Angle Bracket

145513531
RA1A705216115: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-477-6039
Loop Clamp

144776039
51311706018: RNCC: 3 | RNVC: 2
574836: RNCC: 5 | RNVC: 2

13 Sep 1995

5340-14-528-5489
Pipe Hanger

145285489
353894: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-298-8534
Mending Plate

142988534
1000068: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-459-5938
Mounting Bracket

144595938
405035: RNCC: 3 | RNVC: 2
405035: RNCC: 5 | RNVC: 9

10 Dec 1992

5340-14-535-9701
Mounting Plate

145359701
402713: RNCC: 3 | RNVC: 2

2 Jul 2003

5340-14-312-8028
Butt Hinge

143128028
75RANDR0ITE: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-547-7726
Bumper

145477726
10546082: RNCC: 3 | RNVC: 2

12 Nov 2005

5340-14-433-2081
Retaining Strap

144332081
161G2X25: RNCC: 3 | RNVC: 2

17 Jul 1989

5340-14-407-2368
Butt Hinge

144072368
10270-286: RNCC: 3 | RNVC: 9
89408336: RNCC: 5 | RNVC: 2

12 Feb 1986

5340-14-526-4510
Angle Bracket

145264510
RA1M704736330N1: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-548-6345
Mounting Bracket

145486345
RA1M702346361: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-439-1946
Access Cover

144391946
16007332: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-355-2190
Access Cover

143552190
16348950: RNCC: 3 | RNVC: 2
16348950: RNCC: 5 | RNVC: 9

19 Mar 1979

5340-14-501-1223
Compression Cup

145011223
6400.059: RNCC: 3 | RNVC: 2
6400059: RNCC: 3 | RNVC: 2
F300 0T 025 1622: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-401-3539
Anchor Strap

144013539
20328536: RNCC: 3 | RNVC: 2
20328536: RNCC: 5 | RNVC: 9

5 Jun 1985

5340-14-480-7449
Rod End Clevis

144807449
41 51 93: RNCC: 3 | RNVC: 2

28 Mar 1996

5340-14-540-5348
Rim Lock

145405348
19224495: RNCC: 3 | RNVC: 2

1 Apr 2004

5340-14-554-9435
Loop Clamp

145549435
78651RH13CF: RNCC: 1 | RNVC: 2
78651RH13CF: RNCC: 3 | RNVC: 2

11 Sep 2007

5340-14-500-8246
Section Block Clamp

145008246
E64009998088: RNCC: 3 | RNVC: 2
F300 0T 024 8448: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-358-3906
Clamping Catch

143583906
381385: RNCC: 3 | RNVC: 2

13 Aug 1979

5340-14-529-1676
Access Cover

145291676
2557109: RNCC: 3 | RNVC: 2

13 Mar 2002

5340-14-421-6006
Access Cover

144216006
20735252: RNCC: 3 | RNVC: 2
20735252: RNCC: 5 | RNVC: 9

20 Jan 1988

5340-14-463-0226
Anchor Strap

144630226
0000657305: RNCC: 3 | RNVC: 2

12 May 1993

5340-14-541-5296
Access Cover

145415296
1091611: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-364-5737
Rod End Clevis

143645737
5417537X: RNCC: 3 | RNVC: 2
5417537: RNCC: 5 | RNVC: 2

2 Sep 1980

5340-14-526-4455
Access Cover

145264455
RA1M622244840: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-399-5031
Access Cover

143995031
15176915: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-528-5568
Access Cover

145285568
373955: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-432-6498
Surface Bolt

144326498
F3920: RNCC: 3 | RNVC: 2
3920: RNCC: 5 | RNVC: 2

20 Jun 1989

5340-14-536-3675
Access Cover

145363675
47249876: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-14-519-5207
Access Cover

145195207
00016: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-501-7061
Metal Grille

145017061
91719675: RNCC: 3 | RNVC: 2
DS.548X735ALUAN0: RNCC: 3 | RNVC: 2

5 Nov 1997

5340-14-517-7127
Access Cover

145177127
446500000005: RNCC: 3 | RNVC: 2
446500000005: RNCC: 5 | RNVC: 2

5 Jan 2000

5340-14-533-4990
Mounting Bracket

145334990
29405430: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-424-8144
Access Cover

144248144
568791: RNCC: 3 | RNVC: 2

9 Jun 1988

5340-14-501-0870
Access Cover

145010870
45534949: RNCC: 3 | RNVC: 2
F300 0T 025 1211: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-402-6765
Rod End Clevis

144026765
BEL1298: RNCC: 3 | RNVC: 2

19 Jul 1985

5340-14-544-1009
Access Cover

145441009
K190512: RNCC: 3 | RNVC: 2
K190512: RNCC: 5 | RNVC: 2

4 Jan 2005

5340-14-371-6345
Retaining Strap

143716345
MBEU60756: RNCC: 3 | RNVC: 2
033214: RNCC: 5 | RNVC: 2

5 Aug 1981

5340-14-383-4816
Angle Bracket

143834816
20070221: RNCC: 3 | RNVC: 2
20070221: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-548-4890
Mounting Bracket

145484890
5010162609: RNCC: 3 | RNVC: 2

23 Jan 2006

5340-14-246-1945
Hinge Torsion Bar

142461945
38391: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-369-5399
Mending Plate

143695399
16690670: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-542-3000
Mounting Bracket

145423000
971330608: RNCC: 3 | RNVC: 2
971330608: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-526-2119
Bow Handle

145262119
7700001075: RNCC: 3 | RNVC: 2

11 Jul 2001

5340-14-502-7236
Mounting Bracket

145027236
1173642: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-396-5434
Mending Plate

143965434
226899: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-227-9344
Mending Plate

142279344
23001066: RNCC: 3 | RNVC: 2
6-549: RNCC: 5 | RNVC: 2
23001066-6: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-501-3255
Angle Bracket

145013255
704-121421-911-0: RNCC: 3 | RNVC: 2

29 Oct 1997

5340-14-477-9313
Mounting Bracket

144779313
909810-100: RNCC: 3 | RNVC: 2
909810-100: RNCC: 5 | RNVC: 2
909810-100: RNCC: 5 | RNVC: 2
909810-100: RNCC: 5 | RNVC: 9

4 Oct 1995

5340-14-536-6057
Loop Clamp

145366057
ASNA0022-85G25: RNCC: 1 | RNVC: 2
ASNA0022-85G25: RNCC: 3 | RNVC: 2
ASNA0022-85G25: RNCC: 3 | RNVC: 2
ASNA0022-85G25: RNCC: 3 | RNVC: 2
ASNA0022-85G25: RNCC: 5 | RNVC: 2

2 Sep 2003

5340-14-212-5021
Mounting Bracket

142125021
501-990-786-0: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-445-3908
Retaining Strap

144453908
143232: RNCC: 3 | RNVC: 9
3059: RNCC: 5 | RNVC: 9
103059.00: RNCC: 5 | RNVC: 9
10-30590-0: RNCC: 5 | RNVC: 9
10305900: RNCC: 5 | RNVC: 9
143232.00: RNCC: 5 | RNVC: 9
143 232: RNCC: 5 | RNVC: 9
2269: RNCC: 5 | RNVC: 9
143 232: RNCC: 5 | RNVC: 9

12 Feb 1991

5340-14-352-4317
Retaining Strap

143524317
321A75-7170-21: RNCC: 3 | RNVC: 2
85-689-7800: RNCC: 6 | RNVC: 9

16 Oct 1978

5340-14-368-3101
Expansion Plug

143683101
A06450-12: RNCC: 3 | RNVC: 2
1216240: RNCC: 5 | RNVC: 2
1216240: RNCC: 5 | RNVC: 2

20 Feb 1981

5340-14-536-4978
Butt Hinge

145364978
NO PRIMARY REF14-536-4978: RNCC: 3 | RNVC: 2
687-534: RNCC: 5 | RNVC: 9
SC086776: RNCC: 6 | RNVC: 9

28 Aug 2003

5340-14-040-2515
Angle Bracket

140402515
NO PRIMARY REF14-040-2515: RNCC: 3 | RNVC: 2
S272408: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-512-1213
Mounting Plate

145121213
21175446-1: RNCC: 3 | RNVC: 2

4 Feb 1999

5340-14-418-4645
Retaining Strap

144184645
4-454535: RNCC: 3 | RNVC: 9
4402359: RNCC: 5 | RNVC: 2
4-454535: RNCC: 5 | RNVC: 2
4-454535: RNCC: 5 | RNVC: 9

26 Aug 1987

5340-14-360-7060
Rod End Clevis

143607060
62008P1-5: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-387-8283
Bumper

143878283
80125U: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-14-520-9745
Mounting Bracket

145209745
009986010P: RNCC: 3 | RNVC: 2

27 Jun 2000

5340-14-307-0453
Access Cover

143070453
TH20J2144: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-493-5919
Access Cover

144935919
DP5: RNCC: 3 | RNVC: 2
F300 0T 013 7090: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-239-2357
Loop Clamp

142392357
363192: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-516-7531
Access Cover

145167531
10321156: RNCC: 3 | RNVC: 2

13 Oct 1999

5340-14-202-2124
Rod End Clevis

142022124
STE33: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-551-2745
Cover Strip

145512745
RA1B701436631: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-392-7051
Access Cover

143927051
54280007: RNCC: 3 | RNVC: 2
063752: RNCC: 5 | RNVC: 2
63752: RNCC: 5 | RNVC: 9

7 Apr 1984

5340-14-528-8105
Access Cover

145288105
RA1M622245840: RNCC: 3 | RNVC: 2

18 Feb 2002

5340-14-497-5788
Access Cover

144975788
234786: RNCC: 3 | RNVC: 2
F300 0T 023 3813: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-470-1916
Access Cover

144701916
405255: RNCC: 3 | RNVC: 2

8 Jun 1994

5340-14-532-6529
Access Cover

145326529
0847452S01: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-14-467-4088
Access Cover

144674088
1049590P00: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-14-501-5217
Mounting Bracket

145015217
0315777210: RNCC: 3 | RNVC: 2

29 Oct 1997

5340-14-445-5054
Retaining Strap

144455054
ST406M52P712: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-14-462-8435
Access Cover

144628435
31547: RNCC: 3 | RNVC: 2
95071REP2: RNCC: 5 | RNVC: 2

5 May 1993

5340-14-295-2976
Threaded Rod End

142952976
26248674: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-468-5780
Spring Holder

144685780
A66867: RNCC: 3 | RNVC: 2

9 Mar 1994

5340-14-318-0648
Mounting Bracket

143180648
0235280180: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-323-3400
Retaining Strap

143233400
466-9M4P55: RNCC: 3 | RNVC: 2
466-9M4P55: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-417-7066
Retaining Strap

144177066
15913133: RNCC: 3 | RNVC: 2

22 Jul 1987

5340-14-356-1966
Pipe Hanger

143561966
5171350200: RNCC: 3 | RNVC: 2
713502: RNCC: 5 | RNVC: 2

25 Apr 1979

5340-14-400-0176
Mending Plate

144000176
607610: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-571-5954
Utility Access Door

145715954
10618103001: RNCC: 3 | RNVC: 2

12 Apr 2012

5340-14-350-4304
Access Cover

143504304
211425: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-550-3300
Mounting Plate

145503300
2715877970: RNCC: 3 | RNVC: 2

15 Jun 2006

5340-14-523-0504
Utility Access Door

145230504
10552700: RNCC: 3 | RNVC: 2

20 Dec 2000

5340-14-404-6611
Retaining Strap

144046611
5172024900: RNCC: 3 | RNVC: 2
720249: RNCC: 5 | RNVC: 9

20 Nov 1985

5340-14-539-5265
Plug Button

145395265
T632A3081302: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-484-2838
Rod End Clevis

144842838
4348479: RNCC: 3 | RNVC: 2
4348479: RNCC: 5 | RNVC: 9

31 Oct 1996

5340-14-350-6966
Access Cover

143506966
15704517: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-551-4925
Access Cover

145514925
8208464000: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-366-5574
Runner

143665574
769B: RNCC: 3 | RNVC: 9

20 Nov 1980

5340-14-313-0889
Mounting Plate

143130889
16279889: RNCC: 3 | RNVC: 2
16279889: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-470-3366
Angle Bracket

144703366
203570A: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-14-413-9890
Rod End Clevis

144139890
3024722: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-508-1248
Mounting Plate

145081248
19209278: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-500-3860
Retaining Strap

145003860
B62102920000: RNCC: 3 | RNVC: 2
F300 0T 024 3961: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-372-2406
Bow Handle

143722406
0000783672: RNCC: 3 | RNVC: 2
0000783672: RNCC: 5 | RNVC: 9

1 Sep 1981

5340-14-306-8099
Control Rod

143068099
65MA404770A: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-464-2583
Clamping Catch

144642583
SMCFAATC0051B: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-202-2120
Threaded Rod End

142022120
STE24: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-215-5661
Lock-Release Lever

142155661
36336: RNCC: 3 | RNVC: 2
392916: RNCC: 5 | RNVC: 2

1 Jan 1965

5340-14-445-0591
Synchro Clamp

144450591
75255: RNCC: 3 | RNVC: 2

31 Jan 1991

5340-14-514-7645
Mounting Bracket

145147645
71550: RNCC: 3 | RNVC: 2

16 Jun 1999

5340-14-324-4582
Retaining Strap

143244582
1179: RNCC: 3 | RNVC: 9

1 Jan 1975

5340-14-411-7567
Loop Clamp

144117567
544072: RNCC: 3 | RNVC: 2

27 Aug 1986

5340-14-515-2320
Angle Bracket

145152320
3514330510: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-372-7749
Anchor Strap

143727749
S3516: RNCC: 3 | RNVC: 2

21 Sep 1981

5340-14-545-4025
Locking Stay

145454025
F00287573: RNCC: 3 | RNVC: 2
F00287573: RNCC: 5 | RNVC: 9

12 Apr 2005

5340-14-553-4875
Mounting Bracket

145534875
0174043050: RNCC: 3 | RNVC: 2

5 Apr 2007

5340-14-520-3464
Access Cover

145203464
40147675: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-524-3053
Utility Access Door

145243053
2251001: RNCC: 3 | RNVC: 2

12 Mar 2001

5340-14-297-3617
Mounting Plate

142973617
26-424645: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-469-1867
Access Cover

144691867
1081390F00: RNCC: 3 | RNVC: 2

13 Apr 1994

5340-14-357-3736
Leaf Spring

143573736
0165-103-600: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-540-5984
Mounting Plate

145405984
MC2490F00: RNCC: 3 | RNVC: 2

7 Apr 2004

5340-14-550-4144
Mounting Bracket

145504144
2714230340: RNCC: 3 | RNVC: 2

19 Jun 2006

5340-14-341-0258
Rod End Clevis

143410258
910778: RNCC: 3 | RNVC: 2
910778: RNCC: 5 | RNVC: 9

16 Mar 1977

5340-14-518-4831
Access Cover

145184831
0224 8658: RNCC: 3 | RNVC: 9

9 Feb 2000

5340-14-546-0403
Stand Base

145460403
45271224: RNCC: 3 | RNVC: 2

7 Jun 2005

5340-14-393-1256
Retaining Strap

143931256
02140042300: RNCC: 3 | RNVC: 2
021400423: RNCC: 5 | RNVC: 2

12 Apr 1984

5340-14-376-5906
Butt Hinge

143765906
52110057: RNCC: 3 | RNVC: 2
NL21215043: RNCC: 5 | RNVC: 2
52110057: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-226-2786
Retaining Strap

142262786
0337340: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-506-4627
Mounting Plate

145064627
12030300: RNCC: 3 | RNVC: 2

29 Apr 1998

5340-14-434-3155
Mounting Plate

144343155
557977: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-517-0127
Angle Bracket

145170127
RA1M704850285N1: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-493-1475
Strap Hinge

144931475
1017-30X160: RNCC: 3 | RNVC: 2
F300 0T 010 6192: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-453-6737
Threaded Rod End

144536737
0PHD01-648819G: RNCC: 3 | RNVC: 2

4 Mar 1992

5340-14-294-3316
Compression Cup

142943316
A86060: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-500-0769
Mounting Bracket

145000769
3428390: RNCC: 3 | RNVC: 2
F300 0T 024 0780: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-541-3820
Filler Opening Cap

145413820
31802001201: RNCC: 3 | RNVC: 2

3 Jun 2004

5340-14-533-6336
Angle Bracket

145336336
F135196: RNCC: 3 | RNVC: 2

12 Feb 2003

5340-14-448-9870
Mounting Bracket

144489870
BAZ98095: RNCC: 3 | RNVC: 2

24 Jul 1991

5340-14-456-8046
Mounting Bracket

144568046
306711: RNCC: 3 | RNVC: 2

24 Jul 1992

5340-14-514-4655
Shelf Bracket

145144655
10465879: RNCC: 3 | RNVC: 2

26 May 1999

5340-14-238-9756
Retaining Strap

142389756
711609: RNCC: 3 | RNVC: 9
062711609: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-500-6949
Mounting Plate

145006949
E64009998019: RNCC: 3 | RNVC: 2
F300 0T 024 7140: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-533-8539
Cover Strip

145338539
10-250-376: RNCC: 3 | RNVC: 2
SZ10.250.376: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-520-3624
Mounting Bracket

145203624
45824918: RNCC: 3 | RNVC: 9

17 May 2000

5340-14-443-7475
Plate Spacer

144437475
20306221: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-14-357-8323
Angle Bracket

143578323
26257868: RNCC: 3 | RNVC: 2
26257868: RNCC: 3 | RNVC: 9

20 Jul 1979

5340-14-533-6944
Mounting Bracket

145336944
1431-511A558: RNCC: 3 | RNVC: 2
1431-511A558: RNCC: 5 | RNVC: 9

19 Feb 2003

5340-14-450-2196
Mounting Plate

144502196
20122649: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-259-2763
Control Rod

142592763
RACTHP2503A: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-431-9573
Angle Bracket

144319573
2308760250: RNCC: 3 | RNVC: 2
89436328: RNCC: 5 | RNVC: 2

18 May 1989

5340-14-231-6152
Retaining Strap

142316152
6001: RNCC: 3 | RNVC: 2
99041472: RNCC: 5 | RNVC: 2
6001: RNCC: 5 | RNVC: 9
6001: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-420-1195
Mounting Bracket

144201195
0308103070: RNCC: 3 | RNVC: 2

18 Nov 1987

5340-14-534-2494
Mounting Bracket

145342494
EGDN32: RNCC: 3 | RNVC: 2

19 Mar 2003

5340-14-358-4305
Angle Bracket

143584305
394576: RNCC: 3 | RNVC: 2

13 Aug 1979

5340-14-509-6565
Cover Strip

145096565
RA1M126090061: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-315-9640
Key Blank

143159640
50X70X320ACB165: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-345-0440
Loop Clamp

143450440
215-59: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-515-3944
Mounting Plate

145153944
9402224: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-538-8656
Lock Bolt

145388656
NGM0021040403844: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-549-8957
Mounting Bracket

145498957
148 403 00: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-518-0833
Mounting Plate

145180833
8020664E00: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-449-8282
Mounting Bracket

144498282
993-03-03: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-14-524-7554
Access Cover

145247554
21229439-00: RNCC: 3 | RNVC: 2
21229439-4: RNCC: 5 | RNVC: 2

11 Apr 2001

5340-14-231-0924
Loop Clamp

142310924
51113105007: RNCC: 3 | RNVC: 2
Z00.N7141292020: RNCC: 5 | RNVC: 2
25G7: RNCC: 5 | RNVC: 2
A0021-25G07: RNCC: 5 | RNVC: 2
ASNA0021-25G07: RNCC: 5 | RNVC: 2
18877118-2: RNCC: 5 | RNVC: 2
ASNA0021-25G07: RNCC: 5 | RNVC: 2
A0021-25G07: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-549-7912
Loop Clamp

145497912
444321: RNCC: 3 | RNVC: 2
5010631032: RNCC: 5 | RNVC: 2
HRGKSM 1 R 146-154/151 ST: RNCC: 5 | RNVC: 2

12 May 2006

5340-14-529-5565
Mounting Bracket

145295565
330A61-2189-00: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-213-2768
Synchro Clamp

142132768
S2360-1DG: RNCC: 3 | RNVC: 2
S2360-1DG: RNCC: 5 | RNVC: 2
S2360-1: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-403-5387
Mounting Plate

144035387
NO PRIMARY REF14-403-5387: RNCC: 3 | RNVC: 2
27-30101-101-00: RNCC: 5 | RNVC: 9

21 Aug 1985

5340-14-517-6937
Access Cover

145176937
FA1R292-31M1: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-389-4669
Angle Bracket

143894669
365A58-1102LU: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-535-7177
Angle Bracket

145357177
TB30-97045-125: RNCC: 3 | RNVC: 2

19 Jun 2003

5340-14-519-5950
Mounting Plate

145195950
191-1-03-101: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-287-6058
Threaded Rod End

142876058
A10-76-253-05-0: RNCC: 3 | RNVC: 2
A10-76-253-05-0: RNCC: 3 | RNVC: 2
A10-76-253-05-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-469-0990
Mounting Plate

144690990
305-096-601-0: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-14-268-9925
Handwheel

142689925
MAT137-005F3ACIER: RNCC: 3 | RNVC: 2
GSM137-007F7ACIER: RNCC: 5 | RNVC: 2
GSM137-07F07ACIER: RNCC: 5 | RNVC: 2
553-000MA060F7-1N1: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-544-3809
Mounting Bracket

145443809
5001864769: RNCC: 3 | RNVC: 2

26 Jan 2005

5340-14-372-1135
Retaining Strap

143721135
BS349: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-541-1319
Retaining Strap

145411319
2646E006: RNCC: 3 | RNVC: 2
2646E006: RNCC: 3 | RNVC: 2

14 May 2004

5340-14-442-9929
Mounting Bracket

144429929
AL7765: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-14-572-0627
Utility Access Door

145720627
CRPA01360: RNCC: 3 | RNVC: 2

5 Jun 2012

5340-14-545-8570
Retaining Strap

145458570
732376: RNCC: 3 | RNVC: 2

21 May 2005

5340-14-425-7484
Block Clamp

144257484
91432B16B31: RNCC: 3 | RNVC: 2

21 Jul 1988

5340-14-541-3753
Bumper

145413753
31303000201: RNCC: 3 | RNVC: 2

3 Jun 2004

5340-14-250-3608
Retaining Strap

142503608
ST406M52P577: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-417-0510
Angle Bracket

144170510
412802000004: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-14-278-5302
Rim Latch

142785302
10100324: RNCC: 3 | RNVC: 2
10100324: RNCC: 5 | RNVC: 2
CHR10100324: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-545-5974
Loop Clamp

145455974
2203180175: RNCC: 3 | RNVC: 2

25 Apr 2005

5340-14-515-8283
Angle Bracket

145158283
47136343: RNCC: 3 | RNVC: 2

11 Aug 1999

5340-14-519-3610
Mounting Plate

145193610
C711G2001101: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-472-4538
Mounting Bracket

144724538
DXX1107: RNCC: 3 | RNVC: 2

26 Oct 1994

5340-14-513-8045
Mounting Bracket

145138045
DE21785: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-410-6284
Retaining Strap

144106284
404190: RNCC: 3 | RNVC: 2
BGE404190: RNCC: 5 | RNVC: 2

9 Jul 1986

5340-14-453-7332
Mounting Bracket

144537332
45593869: RNCC: 3 | RNVC: 2
45593869: RNCC: 5 | RNVC: 9

5 Mar 1992

5340-14-552-0409
Angle Bracket

145520409
0249870280: RNCC: 3 | RNVC: 2

22 Nov 2006

5340-14-396-0455
Mounting Bracket

143960455
074804: RNCC: 3 | RNVC: 2
3245060748043: RNCC: 5 | RNVC: 2
74804: RNCC: 5 | RNVC: 2
77207: RNCC: 5 | RNVC: 2
LG77207: RNCC: 5 | RNVC: 9
5325031: RNCC: 5 | RNVC: 9
ME086395: RNCC: 6 | RNVC: 9

27 Nov 1984

5340-14-545-9872
Swivel Caster

145459872
8432T: RNCC: 3 | RNVC: 2

1 Jun 2005

5340-14-545-1195
Detent Plunger

145451195
489394: RNCC: 3 | RNVC: 2

18 Mar 2005

5340-14-527-5181
Mounting Plate

145275181
MBEU162434: RNCC: 3 | RNVC: 2

30 Oct 2001

5340-14-508-2689
Strap Hinge

145082689
10261110: RNCC: 3 | RNVC: 2

2 Sep 1998

5340-14-391-5999
Loop Clamp

143915999
494322G0001: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-478-0863
Rod End Clevis

144780863
320844: RNCC: 3 | RNVC: 2
320844: RNCC: 5 | RNVC: 9

11 Oct 1995

5340-14-466-3089
Access Cover

144663089
39293956: RNCC: 3 | RNVC: 2
39293956: RNCC: 3 | RNVC: 9

3 Nov 1993

5340-14-400-1838
Rod End Clevis

144001838
CPV132012308: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-409-0734
Anchor Strap

144090734
4771602230: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-261-3380
Access Cover

142613380
78147C: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-418-0517
Anchor Strap

144180517
PL1: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-447-6289
Anchor Strap

144476289
5000133953: RNCC: 3 | RNVC: 2

29 May 1991

5340-14-480-3687
Rod End Clevis

144803687
5000603732: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-367-6288
Anchor Strap

143676288
300438: RNCC: 3 | RNVC: 2
300438: RNCC: 5 | RNVC: 2

19 Jan 1981

5340-14-365-7364
Anchor Strap

143657364
0000715634: RNCC: 3 | RNVC: 2
0000715634: RNCC: 5 | RNVC: 9
715634: RNCC: 5 | RNVC: 9

8 Oct 1980

5340-14-476-0481
Anchor Strap

144760481
5000602308: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-464-3174
Access Cover

144643174
5210405: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-339-7758
Butt Hinge

143397758
15155973: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-295-1160
Rod End Clevis

142951160
279419: RNCC: 3 | RNVC: 2
279419: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-550-4581
Rim Latch Set

145504581
21408538-01: RNCC: 3 | RNVC: 2
23827659-7: RNCC: 5 | RNVC: 2
238276597: RNCC: 5 | RNVC: 2

21 Jun 2006

5340-14-395-5568
Handwheel

143955568
5-1881B43152-1494: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-314-1625
Mortise Lock Set

143141625
MBLP75-20011: RNCC: 3 | RNVC: 2
450A: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-429-1083
Angle Bracket

144291083
A10-11-355-10-2: RNCC: 3 | RNVC: 2
A10-11-355-10-2: RNCC: 5 | RNVC: 2
85-693-7025: RNCC: 6 | RNVC: 9

11 Jan 1989

5340-14-491-6503
Access Cover

144916503
63030-19: RNCC: 3 | RNVC: 2
F300 0T 003 7630: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-476-1041
Angle Bracket

144761041
121-1141-11: RNCC: 3 | RNVC: 2
85-695-4658: RNCC: 6 | RNVC: 9

17 May 1995

5340-14-437-9528
Compression Cup

144379528
330A21-2193-22: RNCC: 3 | RNVC: 2

28 Feb 1990

5340-14-296-3033
Rod End Clevis

142963033
A4-65385: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-549-8551
Access Cover

145498551
2092314-001: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-276-2789
Rod End Clevis

142762789
160-61564-01: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-361-1165
Access Cover

143611165
955120-209CPV: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-471-9369
Access Cover

144719369
312-18052-001: RNCC: 3 | RNVC: 2

28 Sep 1994

5340-14-482-1162
Mounting Plate

144821162
3266-075: RNCC: 3 | RNVC: 2

20 Jun 1996

5340-14-309-2074
Swivel Caster

143092074
72456: RNCC: 3 | RNVC: 9
72456: RNCC: 5 | RNVC: 2
85-800-0389: RNCC: 6 | RNVC: 9

1 Jan 1974

5340-14-439-2096
Bridge Clamp

144392096
16008452: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-439-6722
Pipe Hanger

144396722
16316109: RNCC: 3 | RNVC: 2
16316109: RNCC: 5 | RNVC: 9

16 May 1990

5340-14-352-0161
Rod End Clevis

143520161
A11A274330203: RNCC: 3 | RNVC: 2

16 Oct 1978

5340-14-473-9458
Access Cover

144739458
39252210: RNCC: 3 | RNVC: 2
39252210: RNCC: 3 | RNVC: 9

18 Jan 1995

5340-14-504-6281
Angle Bracket

145046281
F00141618: RNCC: 3 | RNVC: 2
F00141618: RNCC: 5 | RNVC: 9

25 Feb 1998

5340-14-413-9623
Loop Clamp

144139623
ST400S60P143: RNCC: 3 | RNVC: 2
BJQS60P143: RNCC: 5 | RNVC: 2

22 Jan 1987

5340-14-238-9448
Rod End Clevis

142389448
0075300: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-534-7711
Access Cover

145347711
DB1E212302400: RNCC: 3 | RNVC: 2

4 Apr 2003

5340-14-430-5450
Rod End Clevis

144305450
PM1A171136321: RNCC: 3 | RNVC: 2
PM1A171136321: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-386-0533
Access Cover

143860533
16805141: RNCC: 3 | RNVC: 2
16805141: RNCC: 3 | RNVC: 9

24 Aug 1983

5340-14-434-2220
Access Cover

144342220
30304823D: RNCC: 3 | RNVC: 2

13 Sep 1989

5340-14-546-6150
Access Cover

145466150
TS167034Y00: RNCC: 3 | RNVC: 2

21 Jul 2005

5340-14-549-0949
Angle Bracket

145490949
RA1M704744821: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-413-1663
Rod End Clevis

144131663
412701100104: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-14-547-7285
Access Cover

145477285
61021887AA: RNCC: 3 | RNVC: 2

7 Nov 2005

5340-14-375-8868
Angle Bracket

143758868
0035621428: RNCC: 3 | RNVC: 2
0035621428: RNCC: 5 | RNVC: 9
35621428: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-550-6570
Access Cover

145506570
46249546: RNCC: 3 | RNVC: 2

6 Jul 2006

5340-14-434-1943
Access Cover

144341943
564469: RNCC: 3 | RNVC: 2

12 Sep 1989

5340-14-528-9285
Access Cover

145289285
506241: RNCC: 3 | RNVC: 2

25 Feb 2002

5340-14-404-2638
Mounting Plate

144042638
04136010500: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-430-2495
Angle Bracket

144302495
39527281: RNCC: 3 | RNVC: 2
39527281: RNCC: 5 | RNVC: 9

14 Mar 1989

5340-14-523-7569
Access Cover

145237569
46001135: RNCC: 3 | RNVC: 2
8015961R00: RNCC: 5 | RNVC: 2
46001135: RNCC: 5 | RNVC: 9

31 Jan 2001

5340-14-403-0459
Mounting Plate

144030459
29739164: RNCC: 3 | RNVC: 2
29739164: RNCC: 5 | RNVC: 9

25 Jul 1985

5340-14-470-5302
Access Cover

144705302
F116511: RNCC: 3 | RNVC: 2

22 Jun 1994

5340-14-395-0458
Synchro Clamp

143950458
0298187200: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-361-2306
Access Cover

143612306
5000132192: RNCC: 3 | RNVC: 2
5000132192: RNCC: 5 | RNVC: 9

24 Jan 1980

5340-14-548-4757
Access Cover

145484757
61075781AA: RNCC: 3 | RNVC: 2

19 Jan 2006

5340-14-439-4456
Metal Grille

144394456
LZ20: RNCC: 3 | RNVC: 2
LZ20: RNCC: 5 | RNVC: 9

2 May 1990

5340-14-548-6114
Mounting Bracket

145486114
RA1A704776661: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-482-3191
Detent Plunger

144823191
3511 192 24941: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-14-574-9179
Utility Resilient Mount

145749179
7420364891: RNCC: 3 | RNVC: 2
20364891: RNCC: 5 | RNVC: 2

28 Feb 2013

5340-14-435-9075
Bumper

144359075
0870315B00: RNCC: 3 | RNVC: 2

29 Nov 1989

5340-14-485-2710
Loop Clamp

144852710
189316-228: RNCC: 3 | RNVC: 9

15 Jan 1997

5340-14-516-3565
Loop Clamp

145163565
0E45275: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-14-547-9734
Retaining Strap

145479734
RA1M701256031: RNCC: 3 | RNVC: 2

30 Nov 2005

5340-14-436-2667
Handle Grip

144362667
TB1030744: RNCC: 3 | RNVC: 2

12 Dec 1989

5340-14-286-0589
Retaining Strap

142860589
9205120000: RNCC: 3 | RNVC: 2
205120: RNCC: 5 | RNVC: 2
9-205120-000: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-327-1585
Door Hook

143271585
J36-130-100LAIT0N: RNCC: 2 | RNVC: 2
C2-100LAIT0N: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-513-4404
Rigid Caster

145134404
NO PRIMARY REF14-513-4404: RNCC: 3 | RNVC: 2
TP151-1001-4: RNCC: 5 | RNVC: 2

17 Mar 1999

5340-14-297-7224
Leaf Spring

142977224
NO PRIMARY REF14-297-7224: RNCC: 3 | RNVC: 2
140: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-512-5449
Access Cover

145125449
F293-55-01: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-530-6042
Mounting Bracket

145306042
888-350-206-0: RNCC: 3 | RNVC: 2

26 Jun 2002

5340-14-297-4352
Loop Clamp

142974352
NO PRIMARY REF14-297-4352: RNCC: 3 | RNVC: 2
17-600-14: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-340-6970
Mending Plate

143406970
321A75-0332-21: RNCC: 3 | RNVC: 2
85-689-1514: RNCC: 6 | RNVC: 9

14 Feb 1977

5340-14-364-6021
Mending Plate

143646021
5000496186: RNCC: 3 | RNVC: 2
5000496186: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-489-5662
Mounting Plate

144895662
0301517990: RNCC: 3 | RNVC: 2

4 Aug 1997

5340-14-504-4064
Webbing Strap

145044064
009398013P: RNCC: 3 | RNVC: 2

13 Feb 1998

5340-14-516-6553
Mounting Plate

145166553
104138650: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-14-490-0696
Protection Bellows

144900696
10082336: RNCC: 3 | RNVC: 2

10 Sep 1997

5340-14-456-5825
Mounting Bracket

144565825
2689413P15: RNCC: 3 | RNVC: 2

9 Jul 1992

5340-14-569-7302
Utility Resilient Mount

145697302
521401: RNCC: 3 | RNVC: 2

17 Oct 2011

5340-14-490-0351
Elastic Strap

144900351
459310: RNCC: 3 | RNVC: 2

10 Sep 1997

5340-14-331-3286
Clamping Catch

143313286
42304300: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-489-2348
Retaining Strap

144892348
50007770: RNCC: 3 | RNVC: 2

4 Jul 1997

5340-14-444-7328
Bumper

144447328
71097: RNCC: 3 | RNVC: 2

21 Jan 1991

5340-14-436-2844
Detent Plunger

144362844
0880418T01: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-14-404-5874
Lock-Release Lever

144045874
246698: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-443-0572
Cover Strip

144430572
PM1A227000025: RNCC: 3 | RNVC: 2
PM1A227000025: RNCC: 5 | RNVC: 2

7 Nov 1990

5340-14-489-6788
Cover Strip

144896788
332A87-1079-53: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-300-0238
Retaining Strap

143000238
PF125111: RNCC: 3 | RNVC: 2
PF99-25003: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-552-1662
Bail Handle

145521662
6040-U35-PC: RNCC: 3 | RNVC: 2
8900833543: RNCC: 5 | RNVC: 2

29 Nov 2006

5340-14-366-4496
Detent Plunger

143664496
NO PRIMARY REF14-366-4496: RNCC: 3 | RNVC: 2
D10-23403: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-369-3240
Bow Handle

143693240
366A84-0150-20: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-349-7603
Mending Plate

143497603
4132-311B511: RNCC: 3 | RNVC: 2
0040056E00: RNCC: 5 | RNVC: 2
4132-311B511: RNCC: 5 | RNVC: 9

14 Jun 1978

5340-14-452-2936
Rod End Clevis

144522936
ST114M111-4P21B: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-545-4771
Mounting Plate

145454771
201D01A3103: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-14-464-3134
Runner

144643134
5260114: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-457-6143
Angle Bracket

144576143
PM1A689304302A1: RNCC: 3 | RNVC: 2
PM1A689304302A1: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-538-8957
Lock Bolt

145388957
NGM0023075020222: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-405-4375
Rim Lock Set

144054375
260: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-327-1587
Rim Lock Set

143271587
J36-710SRABATF0L10GAUCHELAIT0N: RNCC: 2 | RNVC: 2
H1GAUCHELAIT0N: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-549-9048
Access Cover

145499048
2092222-001: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-308-9006
Rod End Clevis

143089006
NO PRIMARY REF14-308-9006: RNCC: 3 | RNVC: 2
0131E370: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-314-2356
Retaining Strap

143142356
A10-71-840-10-0: RNCC: 3 | RNVC: 2
A10-71-840-10-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-467-7264
Strap Fastener Loop

144677264
312-17854-501: RNCC: 3 | RNVC: 2

27 Jan 1994

5340-14-213-6095
Retaining Band

142136095
S1687-1DG: RNCC: 3 | RNVC: 2
S1687-1: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-440-0982
Mounting Plate

144400982
T52911104PL5/5-REP7: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-435-1053
Angle Bracket

144351053
3005263: RNCC: 3 | RNVC: 2

18 Oct 1989

5340-14-439-5387
Angle Bracket

144395387
032215L: RNCC: 3 | RNVC: 2

14 May 1990

5340-14-332-0681
Handwheel

143320681
1823NR: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-422-7899
Mounting Plate

144227899
39232589: RNCC: 3 | RNVC: 2
39232589: RNCC: 5 | RNVC: 9

17 Mar 1988

5340-14-539-3561
Runner

145393561
AL100045: RNCC: 3 | RNVC: 2

7 Jan 2004

5340-14-435-3591
Mounting Bracket

144353591
1554317: RNCC: 3 | RNVC: 2
29726392: RNCC: 5 | RNVC: 2
1554317: RNCC: 5 | RNVC: 2

8 Nov 1989

5340-14-518-9239
Loop Clamp

145189239
5005005093: RNCC: 3 | RNVC: 2

29 Feb 2000

5340-14-508-5178
Corner Brace

145085178
10441101: RNCC: 3 | RNVC: 2

16 Sep 1998

5340-14-552-8801
Door Handle

145528801
82175791000: RNCC: 3 | RNVC: 2

10 Feb 2007

5340-14-444-8347
Angle Bracket

144448347
123809153: RNCC: 3 | RNVC: 9

23 Jan 1991

5340-14-240-3096
Lock-Release Lever

142403096
T0P7B130: RNCC: 3 | RNVC: 2
TOP7B130: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-551-3421
Angle Bracket

145513421
RA1M210108411N1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-402-7243
Retaining Strap

144027243
223136: RNCC: 3 | RNVC: 2

19 Jul 1985

5340-14-465-8764
Bumper

144658764
B1849: RNCC: 3 | RNVC: 9

14 Oct 1993

5340-14-531-1471
Mounting Bracket

145311471
TB3020108F470: RNCC: 3 | RNVC: 2

24 Jul 2002

5340-14-512-0410
Mounting Plate

145120410
0052929: RNCC: 3 | RNVC: 2

3 Feb 1999

5340-14-365-2163
Loop Clamp

143652163
160-632279: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-502-5058
Mounting Bracket

145025058
5000448763: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-371-1161
Loop Clamp

143711161
51314105018: RNCC: 3 | RNVC: 2
21R18: RNCC: 5 | RNVC: 2

5 Jun 1981

5340-14-437-9803
Mending Plate

144379803
007452010P: RNCC: 3 | RNVC: 2

5 Mar 1990

5340-14-358-5206
Mending Plate

143585206
0943051206: RNCC: 3 | RNVC: 2
7701016095: RNCC: 5 | RNVC: 2
0943051206: RNCC: 5 | RNVC: 9
943051206: RNCC: 5 | RNVC: 9

7 Sep 1979

5340-14-348-2245
Bow Handle

143482245
556851: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-520-5256
Bumper

145205256
46061886: RNCC: 3 | RNVC: 2
46061886: RNCC: 5 | RNVC: 9

22 May 2000

5340-14-402-0484
Angle Bracket

144020484
232974: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-375-0826
Strapping

143750826
BANDEACIERCADMIE10X500MM: RNCC: 3 | RNVC: 2

30 Jan 1982

5340-14-518-5171
Mounting Plate

145185171
M005HM14120: RNCC: 3 | RNVC: 9

9 Feb 2000

5340-14-475-5312
Mounting Bracket

144755312
501-730-229-0: RNCC: 3 | RNVC: 2
85-695-4436: RNCC: 6 | RNVC: 9

12 Apr 1995

5340-14-490-1931
Access Cover

144901931
307-104-313-0: RNCC: 3 | RNVC: 2

17 Sep 1997

5340-14-382-9717
Pad Eye

143829717
NO PRIMARY REF14-382-9717: RNCC: 3 | RNVC: 2
26-4323: RNCC: 5 | RNVC: 9
IVG671D102: RNCC: 5 | RNVC: 9

17 Mar 1983

5340-14-325-4966
Mounting Plate

143254966
3160S88-10-024-1: RNCC: 3 | RNVC: 2
85-800-3312: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-527-4773
Rod End Connector

145274773
TB30-74117-100: RNCC: 3 | RNVC: 2
TB30-74117-100: RNCC: 3 | RNVC: 2

29 Oct 2001

5340-14-507-0973
Mounting Bracket

145070973
16916280: RNCC: 3 | RNVC: 2
16916280: RNCC: 5 | RNVC: 2

10 Jun 1998

5340-14-206-6918
Retaining Strap

142066918
502-750-314-0: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-420-4946
Snap Hook

144204946
4881-6-122: RNCC: 3 | RNVC: 2
4881-6-18: RNCC: 5 | RNVC: 9

10 Dec 1987

5340-14-473-3944
Pad Eye

144733944
332A55-1084-01: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-308-3585
Loop Clamp

143083585
E4M524-018: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-217-8355
Loop Clamp

142178355
3160S51-20-051: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-205-0014
Loop Clamp

142050014
2228-33-51-10-20C: RNCC: 3 | RNVC: 2
TID5466: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-534-1014
Mounting Bracket

145341014
332A58-1211-04: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-473-8318
Mounting Plate

144738318
332A58-4534-20: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-511-2454
Runner

145112454
429836: RNCC: 3 | RNVC: 2
429836-001: RNCC: 5 | RNVC: 9

9 Dec 1998

5340-14-388-8924
Bumper

143888924
365A24-1230-20: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-358-2645
Runner

143582645
3511-131-18381: RNCC: 3 | RNVC: 2
3511 131 18381: RNCC: 5 | RNVC: 2

13 Aug 1979

5340-14-403-1783
Rod End Clevis

144031783
ST159-2M764-2P177: RNCC: 3 | RNVC: 2

25 Jul 1985

5340-14-529-5614
Mounting Plate

145295614
330A68-2173-00: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-473-8633
Blank Panel

144738633
332P64-3006-04: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-506-9475
Butt Hinge

145069475
HL52-400200: RNCC: 3 | RNVC: 2

27 May 1998

5340-14-474-1011
Mounting Bracket

144741011
F7987 5230-89: RNCC: 3 | RNVC: 9

25 Jan 1995

5340-14-472-8665
Mounting Bracket

144728665
332A21-3226-00: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-370-6330
Retaining Strap

143706330
330A75-3133-00: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-418-0538
Access Cover

144180538
699228-08930: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-406-4729
Loop Clamp

144064729
FH3E703-298: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-549-5962
Butt Hinge

145495962
CC201-627002-30: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-14-404-9237
Loop Clamp

144049237
NO PRIMARY REF14-404-9237: RNCC: 3 | RNVC: 2
178337: RNCC: 5 | RNVC: 9

20 Nov 1985

5340-14-549-6208
Mounting Plate

145496208
JCB 10 135-712: RNCC: 3 | RNVC: 2

24 Apr 2006

5340-14-355-7376
Angle Bracket

143557376
A11A222100007: RNCC: 3 | RNVC: 2

19 Mar 1979

5340-14-379-6318
Mounting Bracket

143796318
16168145: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-361-2835
Webbing Strap

143612835
388811: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-513-3829
Mounting Bracket

145133829
DE33111: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-14-501-5215
Retaining Strap

145015215
0315770990: RNCC: 3 | RNVC: 2

29 Oct 1997

5340-14-500-6952
Mounting Bracket

145006952
10363398: RNCC: 3 | RNVC: 2
F300 0T 024 7143: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-508-0699
Lock Bolt

145080699
4773122250: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-438-8231
Webbing Strap

144388231
TB2010902: RNCC: 3 | RNVC: 2

9 Apr 1990

5340-14-558-9738
Utility Access Door

145589738
82363002001: RNCC: 3 | RNVC: 2

25 Nov 2008

5340-14-377-5710
Loop Clamp

143775710
355484: RNCC: 3 | RNVC: 2
355484: RNCC: 5 | RNVC: 9

10 Jun 1982

5340-14-370-7853
Angle Bracket

143707853
494382: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-468-3726
Rim Lock Set

144683726
1082226F00: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-14-512-0285
Bridge Clamp

145120285
0053960: RNCC: 3 | RNVC: 2
BRIBMA14X61X96: RNCC: 3 | RNVC: 2

3 Feb 1999

5340-14-531-5639
Metal Grille

145315639
ISO5NACA26: RNCC: 3 | RNVC: 2

28 Aug 2002

5340-14-543-5773
Angle Bracket

145435773
T533A1030129: RNCC: 3 | RNVC: 2

23 Nov 2004

5340-14-488-4923
Angle Bracket

144884923
45836788: RNCC: 3 | RNVC: 9

14 May 1997

5340-14-340-8845
Key Blank

143408845
55X100X1320ACB165TRAITE: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-481-3628
Mounting Bracket

144813628
10017300: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-370-0185
Angle Bracket

143700185
0235700230: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-552-8141
Webbing Strap

145528141
82116808000: RNCC: 3 | RNVC: 2
82173185: RNCC: 5 | RNVC: 2

5 Feb 2007

5340-14-463-8247
Loop Clamp

144638247
409127: RNCC: 3 | RNVC: 2
409127: RNCC: 5 | RNVC: 9
85-695-0501: RNCC: 6 | RNVC: 9

30 Jun 1993

5340-14-425-0864
Protection Bellows

144250864
09625-161: RNCC: 3 | RNVC: 2
9625: RNCC: 5 | RNVC: 9

21 Jun 1988

5340-14-396-3757
Butt Hinge

143963757
7704001137: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-393-1010
Runner

143931010
96116111F2427: RNCC: 3 | RNVC: 2
96116111: RNCC: 5 | RNVC: 9
96116111: RNCC: 5 | RNVC: 9

12 Apr 1984

5340-14-442-5986
Rim Lock

144425986
SCA540-561-17: RNCC: 3 | RNVC: 2

22 Oct 1990

5340-14-525-6578
Loop Clamp

145256578
20 242 030 9410: RNCC: 3 | RNVC: 2
9309: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-293-3966
Retaining Strap

142933966
NO PRIMARY REF14-293-3966: RNCC: 3 | RNVC: 2
0400410090: RNCC: 5 | RNVC: 2
9560110600: RNCC: 5 | RNVC: 2
53393: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-551-4922
Mounting Bracket

145514922
10650126: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-348-3513
Loop Clamp

143483513
123319170: RNCC: 3 | RNVC: 2
PF12A3CN17: RNCC: 5 | RNVC: 2
PF12A3CN17: RNCC: 5 | RNVC: 9
PF12A3CN17: RNCC: 5 | RNVC: 9
PF12A3NC17: RNCC: 5 | RNVC: 9

29 Mar 1978

5340-14-459-1570
Mounting Plate

144591570
16787462: RNCC: 3 | RNVC: 2

19 Nov 1992

5340-14-416-2497
Runner

144162497
8162232: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-531-8912
Mounting Bracket

145318912
0177700470: RNCC: 3 | RNVC: 2

25 Sep 2002

5340-14-516-9625
Mounting Bracket

145169625
10407873: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-431-9628
Mounting Bracket

144319628
1131576000: RNCC: 3 | RNVC: 2
91675463: RNCC: 5 | RNVC: 2

18 May 1989

5340-14-381-7867
Mounting Plate

143817867
16762718: RNCC: 3 | RNVC: 2
16762718: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-548-1276
Mounting Bracket

145481276
5010467017: RNCC: 3 | RNVC: 2

12 Dec 2005

5340-14-531-6614
Runner

145316614
1122762S00: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-14-524-2241
Mounting Plate

145242241
20233495: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-316-9640
Bow Handle

143169640
NO PRIMARY REF14-316-9640: RNCC: 3 | RNVC: 2
H4: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-261-2799
Leaf Spring

142612799
175-72-141: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-305-6178
Door Handle

143056178
N416-24-07: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-517-3996
Access Cover

145173996
AVP03481-01-160117: RNCC: 3 | RNVC: 2
SDMAVP03481-01-160117: RNCC: 5 | RNVC: 9

8 Dec 1999

5340-14-410-6301
Access Cover

144106301
304584: RNCC: 3 | RNVC: 2
GE5169-40-01: RNCC: 5 | RNVC: 2

9 Jul 1986

5340-14-372-6916
Anchor Strap

143726916
3254-040: RNCC: 3 | RNVC: 2

21 Sep 1981

5340-14-541-5361
Mounting Bracket

145415361
1091689-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-482-9222
Pipe Hanger

144829222
78732-020-048B: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-387-5170
Rod End Clevis

143875170
GSM295-007F18: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-14-344-7568
Retaining Strap

143447568
EA1M792-24-03: RNCC: 3 | RNVC: 2

9 Sep 1977

5340-14-411-1447
Rod End Clevis

144111447
332A87-1000-20: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-471-0302
Loop Clamp

144710302
411732: RNCC: 3 | RNVC: 2
411732-001: RNCC: 5 | RNVC: 9

20 Jul 1994

5340-14-362-6313
Retaining Band

143626313
2275-11: RNCC: 3 | RNVC: 2
85-691-0794: RNCC: 6 | RNVC: 9
86-273-2661: RNCC: 6 | RNVC: 9

19 Mar 1980

5340-14-411-1818
Rod End Clevis

144111818
332A57-2423-20: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-354-7575
Retaining Strap

143547575
150655: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-524-0443
Mounting Bracket

145240443
ISO1NACA06: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-14-549-9040
Utility Access Door

145499040
11103517: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-481-5336
Filler Opening Cap

144815336
02500006: RNCC: 3 | RNVC: 2

16 May 1996

5340-14-428-2050
Loop Clamp

144282050
75442811100: RNCC: 3 | RNVC: 2
75442811100: RNCC: 3 | RNVC: 2
320365: RNCC: 5 | RNVC: 2
320365: RNCC: 5 | RNVC: 2
754428111: RNCC: 5 | RNVC: 9

6 Dec 1988

5340-14-440-0365
Protection Bellows

144400365
226979: RNCC: 3 | RNVC: 2

10 Jul 1990

5340-14-438-1932
Cover Strip

144381932
PM1A121213105: RNCC: 3 | RNVC: 2
PM1A121213105: RNCC: 5 | RNVC: 2

7 Mar 1990

5340-14-446-1454
Mounting Plate

144461454
45611469: RNCC: 3 | RNVC: 2
45611469: RNCC: 5 | RNVC: 9

6 Mar 1991

5340-14-437-8396
Detent Plunger

144378396
303GS01: RNCC: 3 | RNVC: 2

21 Feb 1990

5340-14-533-4270
Mounting Bracket

145334270
F1262283: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-385-9410
Clamping Catch

143859410
16798179: RNCC: 3 | RNVC: 2
16798179: RNCC: 3 | RNVC: 9

24 Aug 1983

5340-14-360-9917
Handwheel

143609917
103434: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-438-9601
Mounting Plate

144389601
330A98-2043-21: RNCC: 3 | RNVC: 2

11 Apr 1990

5340-14-296-2034
Bumper

142962034
121E83-341-25-1: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-441-9450
Mounting Bracket

144419450
139-01: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-485-4097
Mounting Plate

144854097
56-5801-013: RNCC: 3 | RNVC: 2

23 Jan 1997

5340-14-500-8590
Butt Hinge

145008590
189E345-00: RNCC: 3 | RNVC: 2
189E345-00: RNCC: 5 | RNVC: 9
F300 0T 024 8793: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-365-9871
Loop Clamp

143659871
9136221118: RNCC: 3 | RNVC: 2
9-136221-118: RNCC: 5 | RNVC: 2

4 Nov 1980

5340-14-510-0812
Shimmy Damper

145100812
NO PRIMARY REF14-510-0812: RNCC: 3 | RNVC: 2
03-06-060-0050: RNCC: 5 | RNVC: 9
5340AA2082450: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-503-5059
Snap Hook

145035059
695 720 467 015: RNCC: 3 | RNVC: 2
902-PBS-009-G: RNCC: 3 | RNVC: 2
SYQ6017: RNCC: 5 | RNVC: 2

16 Jan 1998

5340-14-428-5095
Rod End Clevis

144285095
4605EHA000-0003: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-365-5157
Rod End Clevis

143655157
20-75-1012: RNCC: 3 | RNVC: 2
20-75-1012B: RNCC: 5 | RNVC: 2

19 Sep 1980

5340-14-419-2385
Angle Bracket

144192385
7252-50: RNCC: 3 | RNVC: 2
9223350180: RNCC: 5 | RNVC: 2
9407252500: RNCC: 5 | RNVC: 2
9223350180: RNCC: 5 | RNVC: 2

16 Oct 1987

5340-14-498-2262
Rod End Clevis

144982262
E22451-10XC38: RNCC: 2 | RNVC: 2
91934409: RNCC: 3 | RNVC: 2
F300 0T 004 6151: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-297-4666
Rim Lock Set

142974666
911CCAME911-2: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-392-1913
Access Cover

143921913
5-565-800: RNCC: 3 | RNVC: 2
5-565-800: RNCC: 5 | RNVC: 2
5-565-800: RNCC: 5 | RNVC: 9

21 Mar 1984

5340-14-481-7218
Pipe Hanger

144817218
103-28-54-2: RNCC: 3 | RNVC: 2

29 May 1996

5340-14-463-9937
Access Cover

144639937
627008563: RNCC: 3 | RNVC: 2
6270-08563: RNCC: 5 | RNVC: 2

7 Jul 1993

5340-14-222-3741
Threaded Rod End

142223741
2-01334: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-432-1711
Bow Handle

144321711
3511 265 06131: RNCC: 3 | RNVC: 2
8793-4: RNCC: 5 | RNVC: 9

24 May 1989

5340-14-324-8835
Webbing Strap

143248835
330A91-2000-13: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-465-2823
Mounting Bracket

144652823
365A62-1861-00: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-322-3876
Loop Clamp

143223876
NO PRIMARY REF14-322-3876: RNCC: 3 | RNVC: 2
640637: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-369-1791
Butt Hinge

143691791
160-632233-02: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-296-0791
Retaining Strap

142960791
3132038: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-414-9990
Retaining Strap

144149990
ST400S60P154: RNCC: 3 | RNVC: 2

26 Mar 1987

5340-14-550-9087
Pipe Hanger

145509087
RA1B702416121: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-445-2387
Bumper

144452387
BM50-20: RNCC: 3 | RNVC: 2

6 Feb 1991

5340-14-426-0080
Loop Clamp

144260080
89-99-0652: RNCC: 3 | RNVC: 2

28 Jul 1988

5340-14-531-2172
Mounting Bracket

145312172
341A64-5050-20: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-323-5179
Snap Hook

143235179
22201-160-003: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-335-3458
Recess Handle

143353458
190264: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-523-2432
Pipe Hanger

145232432
RA1M701396131: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-462-7347
Section Block Clamp

144627347
PM1A743140212: RNCC: 3 | RNVC: 2
PM1A743140212: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-14-369-2324
Loop Clamp

143692324
55219-306B316ADL: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-302-5649
Cover Strip

143025649
330A22-2177-20: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-515-4098
Loop Clamp

145154098
21612055F: RNCC: 3 | RNVC: 2
21612055: RNCC: 5 | RNVC: 2

13 Jul 1999

5340-14-514-4809
Shelf Bracket

145144809
45219303: RNCC: 3 | RNVC: 2
45219303: RNCC: 5 | RNVC: 2
5010579505: RNCC: 5 | RNVC: 2
IF-192-0328: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-362-1131
Synchro Clamp

143621131
GSM175-005F15: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-477-2556
Support Hook

144772556
RA1M219101601U1: RNCC: 3 | RNVC: 2

2 Aug 1995

5340-14-433-6126
Mounting Plate

144336126
8815465005: RNCC: 3 | RNVC: 2
89411411: RNCC: 5 | RNVC: 2

2 Aug 1989

5340-14-305-4589
Loop Clamp

143054589
21S0750501: RNCC: 3 | RNVC: 2
21S0750501: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-513-4053
Lock-Release Lever

145134053
682-43681-00: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-14-212-4275
Loop Clamp

142124275
NO PRIMARY REF14-212-4275: RNCC: 3 | RNVC: 2
99026170: RNCC: 5 | RNVC: 2
CN25: RNCC: 5 | RNVC: 9
CN25NYL0N: RNCC: 5 | RNVC: 9
CN25SD: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-523-2456
Retaining Band

145232456
RA1M701616012: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-523-6990
Mounting Plate

145236990
P1823522: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-031-1539
Runner

140311539
VDP2079: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-544-6234
Mounting Bracket

145446234
072953987000002: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-14-281-1999
Case Corner

142811999
MS6: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-504-7762
Lock Bolt

145047762
5010148306: RNCC: 3 | RNVC: 2
2803527: RNCC: 3 | RNVC: 2

4 Mar 1998

5340-14-555-6759
Mounting Bracket

145556759
720437: RNCC: 3 | RNVC: 2

6 Dec 2007

5340-14-449-3251
Mounting Plate

144493251
588A102: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-549-6031
Ladder Safety Shoe

145496031
7M223O: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-14-435-6807
Angle Bracket

144356807
562229: RNCC: 3 | RNVC: 2

17 Nov 1989

5340-14-342-2320
Permanent Magnet

143422320
JUNI0R16: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-551-5335
Mending Plate

145515335
610654: RNCC: 3 | RNVC: 2

28 Sep 2006

5340-14-440-5348
Loop Clamp

144405348
RSGU1-22-20W5: RNCC: 3 | RNVC: 2
RSGU1-22-20W5: RNCC: 5 | RNVC: 2
RSGU1-22-20W5: RNCC: 5 | RNVC: 2
5005005006: RNCC: 5 | RNVC: 2

17 Jul 1990

5340-14-518-6202
Mounting Plate

145186202
5010226043: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-513-6979
Angle Bracket

145136979
702320: RNCC: 3 | RNVC: 2

7 Apr 1999

5340-14-482-6209
Mounting Bracket

144826209
39980606: RNCC: 3 | RNVC: 2

18 Jul 1996

5340-14-465-4952
Angle Bracket

144654952
365A61-3001-1801: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-407-8157
Loop Clamp

144078157
PE27021-5770: RNCC: 3 | RNVC: 2
FIF5770: RNCC: 5 | RNVC: 2
85-692-0385: RNCC: 6 | RNVC: 9
85-693-9657: RNCC: 6 | RNVC: 9

5 Mar 1986

5340-14-486-1760
Section Block Clamp

144861760
H48203-70: RNCC: 3 | RNVC: 2
P48203-70H: RNCC: 5 | RNVC: 2

5 Mar 1997

5340-14-549-6771
Mounting Bracket

145496771
169E668-00: RNCC: 3 | RNVC: 2

26 Apr 2006

5340-14-552-3141
Key Blank

145523141
VK7-BED: RNCC: 3 | RNVC: 2
VK7-BED: RNCC: 5 | RNVC: 9

12 Dec 2006

5340-14-460-9472
Mounting Bracket

144609472
A1-86748: RNCC: 3 | RNVC: 2

17 Feb 1993

5340-14-453-6395
Access Cover

144536395
31-915-200: RNCC: 3 | RNVC: 2
31-915-200: RNCC: 5 | RNVC: 9

3 Mar 1992

5340-14-513-6198
Mounting Bracket

145136198
6805K31-0033-01: RNCC: 3 | RNVC: 2

30 Mar 1999

5340-14-345-1593
Expansion Plug

143451593
FD1B266-001: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-531-2337
Access Cover

145312337
955120-316CPV: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-322-8505
Angle Bracket

143228505
3130S53-32-023: RNCC: 3 | RNVC: 2

1 Jan 1975

Load More Results