What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 128 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 128 of 446

5340-14-447-3844
Access Cover

144473844
16558348: RNCC: 3 | RNVC: 2
16558348: RNCC: 5 | RNVC: 9

15 May 1991

5340-14-366-7917
Anchor Strap

143667917
969459: RNCC: 3 | RNVC: 2
969459: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-527-0628
Access Cover

145270628
603P063: RNCC: 3 | RNVC: 2
603P063: RNCC: 5 | RNVC: 9

28 Sep 2001

5340-14-519-3327
Mounting Bracket

145193327
C212A1101214: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-332-9390
Retaining Strap

143329390
193510: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-505-6111
Access Cover

145056111
218734: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-395-7607
Rod End Clevis

143957607
DA1D571236003: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-351-6324
Access Cover

143516324
301528: RNCC: 3 | RNVC: 2

12 Sep 1978

5340-14-412-4798
Access Cover

144124798
27142: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-14-504-0269
Access Cover

145040269
4526996A: RNCC: 3 | RNVC: 2
4526996A: RNCC: 3 | RNVC: 9

4 Feb 1998

5340-14-537-6043
Access Cover

145376043
001 011 373-02: RNCC: 3 | RNVC: 2
001 011 373-02: RNCC: 5 | RNVC: 2

12 Nov 2003

5340-14-415-0158
Access Cover

144150158
254335: RNCC: 3 | RNVC: 2
254335: RNCC: 5 | RNVC: 9

26 Mar 1987

5340-14-417-9966
Access Cover

144179966
BKE08119: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-416-4325
Detent Plunger

144164325
0736774P07: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-14-535-1845
Mounting Bracket

145351845
5000988116: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-335-6713
Retaining Strap

143356713
PR15: RNCC: 3 | RNVC: 9

30 Jun 1976

5340-14-500-4024
Loop Clamp

145004024
310N10: RNCC: 3 | RNVC: 2
77704850T: RNCC: 5 | RNVC: 2
F300 0T 024 4125: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-501-1876
Access Cover

145011876
20300001: RNCC: 3 | RNVC: 2
F300 0T 025 2280: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-359-7296
Anchor Strap

143597296
BAZ3434: RNCC: 3 | RNVC: 2

15 Oct 1979

5340-14-500-3057
Utility Access Door

145003057
10492939: RNCC: 3 | RNVC: 2
F300 0T 024 3143: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-369-0638
Access Cover

143690638
5830P: RNCC: 3 | RNVC: 9
5830: RNCC: 5 | RNVC: 9
5830: RNCC: 5 | RNVC: 9

17 Apr 1981

5340-14-471-5378
Access Cover

144715378
P055829: RNCC: 3 | RNVC: 2
55829: RNCC: 5 | RNVC: 9

31 Aug 1994

5340-14-528-8735
Access Cover

145288735
GC056583Y00: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-14-285-5493
Rod End Clevis

142855493
ES42925: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-435-6795
Rod End Clevis

144356795
098143C: RNCC: 3 | RNVC: 2

17 Nov 1989

5340-14-554-3262
Access Cover

145543262
82189061000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-527-6143
Locking Stay

145276143
COU001552012001: RNCC: 3 | RNVC: 2

5 Nov 2001

5340-14-460-9193
Access Cover

144609193
TB5010114: RNCC: 3 | RNVC: 2

16 Feb 1993

5340-14-362-9678
Access Cover

143629678
5000112469: RNCC: 3 | RNVC: 2
5000112469: RNCC: 5 | RNVC: 9

3 Apr 1980

5340-14-502-6006
Mounting Bracket

145026006
5010039832: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-375-4639
Rod End Connector

143754639
052011: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-444-5137
Mounting Bracket

144445137
TB3050702: RNCC: 3 | RNVC: 2
71232: RNCC: 5 | RNVC: 9

14 Jan 1991

5340-14-525-5118
Access Cover

145255118
29492655: RNCC: 3 | RNVC: 2

6 Jun 2001

5340-14-522-6858
Access Cover

145226858
202219: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-14-329-4494
Access Cover

143294494
413-02014-000: RNCC: 3 | RNVC: 2
413-02014-000: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-369-0560
Rod End Clevis

143690560
406326124: RNCC: 3 | RNVC: 9
6326124: RNCC: 5 | RNVC: 9

17 Apr 1981

5340-14-481-5762
Runner

144815762
45278547: RNCC: 3 | RNVC: 2
45278547: RNCC: 5 | RNVC: 9

16 May 1996

5340-14-211-5329
Loop Clamp

142115329
FL147067: RNCC: 3 | RNVC: 2
141067: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-224-8490
Loop Clamp

142248490
C0LLIER22-6-35W: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-555-2002
Mounting Bracket

145552002
12474-00: RNCC: 3 | RNVC: 2

10 Oct 2007

5340-14-321-5104
Control Rod

143215104
117162: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-204-2234
Loop Clamp

142042234
MT14GN: RNCC: 3 | RNVC: 2
MT14GN: RNCC: 5 | RNVC: 9
MT14GNB2: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-14-260-0535
Rod End Clevis

142600535
321A58-0256-21: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-429-9057
Angle Bracket

144299057
0900-106-000: RNCC: 3 | RNVC: 2
0900-106: RNCC: 5 | RNVC: 2

15 Feb 1989

5340-14-409-6956
Plug Button

144096956
78680-120057: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-231-1861
Mending Plate

142311861
610-8005: RNCC: 3 | RNVC: 2
4234210500: RNCC: 5 | RNVC: 9
2342-50: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-377-0827
Cover Strip

143770827
330A76-3216-22: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-520-8868
Mortise Latch

145208868
E3-56-75: RNCC: 3 | RNVC: 2

21 Jun 2000

5340-14-032-0730
Retaining Band

140320730
341A58-1011-23: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-377-2559
Mounting Bracket

143772559
366A58-0120-46: RNCC: 3 | RNVC: 2

17 May 1982

5340-14-548-9878
Mounting Bracket

145489878
21248607-00: RNCC: 3 | RNVC: 2
21248607-0: RNCC: 5 | RNVC: 2

28 Feb 2006

5340-14-278-4503
Rod End Connector

142784503
12505682: RNCC: 3 | RNVC: 2
12505682: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-352-6109
Rigid Caster

143526109
053V01-542287L: RNCC: 3 | RNVC: 2
0542287L00: RNCC: 5 | RNVC: 2

14 Nov 1978

5340-14-363-2165
Retaining Strap

143632165
3130S78-15-441: RNCC: 3 | RNVC: 2
85-689-9178: RNCC: 6 | RNVC: 9

3 Apr 1980

5340-14-384-3190
Loop Clamp

143843190
92831281: RNCC: 3 | RNVC: 2
9-28GE28: RNCC: 5 | RNVC: 2

4 May 1983

5340-14-554-9448
Webbing Strap

145549448
030534B: RNCC: 3 | RNVC: 2

12 Sep 2007

5340-14-516-8603
Bumper

145168603
101165011080: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-14-553-3576
Cover Strip

145533576
M5221122620000: RNCC: 3 | RNVC: 2
M5221122620000: RNCC: 5 | RNVC: 2

28 Mar 2007

5340-14-543-3663
Mounting Plate

145433663
213326: RNCC: 3 | RNVC: 2

23 Oct 2004

5340-14-544-7508
Loop Clamp

145447508
90006337: RNCC: 3 | RNVC: 2
90006337: RNCC: 5 | RNVC: 9

22 Feb 2005

5340-14-543-7294
Mounting Plate

145437294
1000003893: RNCC: 3 | RNVC: 2

7 Dec 2004

5340-14-392-8391
Mounting Plate

143928391
5000045774: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-434-9212
Mounting Plate

144349212
3511 191 76451: RNCC: 3 | RNVC: 2

10 Oct 1989

5340-14-435-6043
Angle Bracket

144356043
1203023: RNCC: 3 | RNVC: 2
1203023: RNCC: 5 | RNVC: 2

13 Nov 1989

5340-14-396-5603
Butt Hinge

143965603
FF5P: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-457-7444
Mounting Bracket

144577444
71860: RNCC: 3 | RNVC: 2

17 Sep 1992

5340-14-368-2117
Bumper

143682117
70069: RNCC: 3 | RNVC: 2

20 Feb 1981

5340-14-537-5077
Handwheel

145375077
6501DDA110012: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-539-6771
Mounting Bracket

145396771
10642884: RNCC: 3 | RNVC: 2

28 Jan 2004

5340-14-456-1377
Mounting Bracket

144561377
5000666004: RNCC: 3 | RNVC: 2
5000666004: RNCC: 3 | RNVC: 9

18 Jun 1992

5340-14-441-1346
Mounting Plate

144411346
16765955: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-460-8335
Angle Bracket

144608335
5000603936: RNCC: 3 | RNVC: 2

10 Feb 1993

5340-14-231-0910
Loop Clamp

142310910
51213105019: RNCC: 3 | RNVC: 2
20G19: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-449-3126
Plate Spacer

144493126
519B011: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-395-1083
Webbing Strap

143951083
26-292: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-536-8726
Mounting Bracket

145368726
81101404: RNCC: 3 | RNVC: 2

17 Sep 2003

5340-14-278-4630
Webbing Strap

142784630
TDCCM1BIS156: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-504-9365
Door Handle

145049365
POIGN91129X00: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-452-4424
Angle Bracket

144524424
DB1D203785001: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-541-6969
Mounting Bracket

145416969
VESA: RNCC: 3 | RNVC: 2

18 Jun 2004

5340-14-438-1514
Mounting Plate

144381514
330A25-2141-12: RNCC: 3 | RNVC: 2
F300 0T 010 9337: RNCC: 5 | RNVC: 9

7 Mar 1990

5340-14-364-3748
Butt Hinge

143643748
969402: RNCC: 3 | RNVC: 2
969402: RNCC: 5 | RNVC: 9

7 Aug 1980

5340-14-543-4262
Mounting Bracket

145434262
8045279S00: RNCC: 3 | RNVC: 2

28 Oct 2004

5340-14-356-0845
Detent Plunger

143560845
052855: RNCC: 3 | RNVC: 2

5 Apr 1979

5340-14-542-2141
Runner

145422141
571830208: RNCC: 3 | RNVC: 2
571830208: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-534-1161
Mounting Bracket

145341161
332P61-6115-01: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-357-4732
Pipe Hanger

143574732
A11A522320620: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-406-4437
Loop Clamp

144064437
F707-049: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-360-9021
Loop Clamp

143609021
70277303: RNCC: 3 | RNVC: 2
28011069: RNCC: 5 | RNVC: 2
70277303: RNCC: 5 | RNVC: 9

19 Dec 1979

5340-14-398-1426
Mending Plate

143981426
355A54-3029-20: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-386-9897
Butt Hinge

143869897
40356-3614: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-254-3930
Bumper

142543930
512601: RNCC: 3 | RNVC: 2
512-601: RNCC: 5 | RNVC: 2
5000788456: RNCC: 5 | RNVC: 2
5010167489: RNCC: 5 | RNVC: 2
5828241024: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-383-1103
Utility Access Door

143831103
366A24-0120-0701: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-418-0149
Rod End Connector

144180149
66016-148: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-514-7232
Mounting Bracket

145147232
TB30-58032-102: RNCC: 3 | RNVC: 2
TB30-58032-102: RNCC: 3 | RNVC: 2

9 Jun 1999

5340-14-489-2629
Mounting Plate

144892629
AM1-PA8060: RNCC: 3 | RNVC: 2
3389110571868: RNCC: 5 | RNVC: 2

9 Jul 1997

5340-14-322-9037
Angle Bracket

143229037
458641: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-341-7462
Loop Clamp

143417462
715911: RNCC: 3 | RNVC: 2
5171591100: RNCC: 5 | RNVC: 2

14 Apr 1977

5340-14-439-6769
Mounting Bracket

144396769
16787618: RNCC: 3 | RNVC: 2
16787618: RNCC: 5 | RNVC: 9

16 May 1990

5340-14-553-5616
Strap Hinge

145535616
27.04487: RNCC: 3 | RNVC: 2

17 Apr 2007

5340-14-421-5052
Runner

144215052
325386: RNCC: 3 | RNVC: 2

14 Jan 1988

5340-14-416-6809
Angle Bracket

144166809
412802070002: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-303-3953
Mounting Bracket

143033953
24C4316: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-322-4347
Angle Bracket

143224347
438507: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-257-9265
Angle Bracket

142579265
C241984: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-549-0834
Angle Bracket

145490834
RA1M706335511N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-419-2364
Clamping Catch

144192364
4FE601ABR: RNCC: 3 | RNVC: 2
GER550HN: RNCC: 5 | RNVC: 2
70384: RNCC: 5 | RNVC: 2

16 Oct 1987

5340-14-527-4166
Loop Clamp

145274166
P106757V: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-392-6764
Butt Hinge

143926764
174523: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-551-8678
Mounting Bracket

145518678
0025629: RNCC: 3 | RNVC: 2

3 Nov 2006

5340-14-443-8762
Loop Clamp

144438762
51120605022: RNCC: 3 | RNVC: 2
24FE22: RNCC: 5 | RNVC: 2

11 Dec 1990

5340-14-454-0369
Mounting Bracket

144540369
30330250C: RNCC: 3 | RNVC: 2
5044338: RNCC: 5 | RNVC: 9

19 Mar 1992

5340-14-414-5714
Retaining Strap

144145714
230371: RNCC: 3 | RNVC: 2

11 Feb 1987

5340-14-550-9187
Angle Bracket

145509187
RA1B702202425: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-551-3351
Pipe Hanger

145513351
RA1M701346721N1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-497-3169
Access Cover

144973169
19206411: RNCC: 3 | RNVC: 2
F300 0T 023 0021: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-382-4676
Retaining Strap

143824676
386393: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-424-2624
Access Cover

144242624
0308127460: RNCC: 3 | RNVC: 2
89436194: RNCC: 5 | RNVC: 2

19 May 1988

5340-14-518-6042
Loop Clamp

145186042
5010094656: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-550-9157
Angle Bracket

145509157
RA1B701732221: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-535-0483
Mounting Bracket

145350483
T947A1001204: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-14-468-7162
Mounting Bracket

144687162
SE050AE47: RNCC: 3 | RNVC: 2

16 Mar 1994

5340-14-460-8769
Mounting Bracket

144608769
LN446018F13: RNCC: 3 | RNVC: 2
RAB0475: RNCC: 5 | RNVC: 2

12 Feb 1993

5340-14-392-9483
Access Cover

143929483
0000190697: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-277-7086
Plug Button

142777086
HE60A96: RNCC: 3 | RNVC: 2
530733: RNCC: 5 | RNVC: 2
HE60A96: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-500-5388
Access Cover

145005388
590564: RNCC: 3 | RNVC: 2
F300 0T 024 5564: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-530-2413
Access Cover

145302413
TB1010125E: RNCC: 3 | RNVC: 2

22 May 2002

5340-14-452-4677
Access Cover

144524677
108060003001: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-536-0703
Mounting Bracket

145360703
803238140118: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-528-1706
Case Corner

145281706
8900007217: RNCC: 3 | RNVC: 2
8037120G00: RNCC: 5 | RNVC: 2

9 Jan 2002

5340-14-518-8932
Access Cover

145188932
29423985: RNCC: 3 | RNVC: 2

23 Feb 2000

5340-14-503-7219
Mounting Plate

145037219
201863: RNCC: 3 | RNVC: 2

28 Jan 1998

5340-14-423-7488
Angle Bracket

144237488
29741555: RNCC: 3 | RNVC: 2
29741555: RNCC: 5 | RNVC: 9

28 Apr 1988

5340-14-250-3212
Rod End Clevis

142503212
150041: RNCC: 3 | RNVC: 2
61.12.101: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-300-3468
Runner

143003468
15614459: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-332-8908
Access Cover

143328908
BAZ2201: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-530-9338
Access Cover

145309338
16280717: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-14-526-5493
Access Cover

145265493
DA2C812711600A1: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-361-1601
Bumper

143611601
164588: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-350-4226
Plug Button

143504226
206673: RNCC: 3 | RNVC: 2
MAF0001003440: RNCC: 6 | RNVC: 9

12 Jul 1978

5340-14-398-9875
Access Cover

143989875
M125426: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-284-7276
Rod End Clevis

142847276
AJ5108: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-542-3015
Mounting Plate

145423015
953695308: RNCC: 3 | RNVC: 2
953695308: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-442-1127
Anchor Strap

144421127
9441052: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-14-338-1384
Plug Button

143381384
19290816: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-520-8342
Access Cover

145208342
4009100380: RNCC: 3 | RNVC: 2
9520011708: RNCC: 5 | RNVC: 2

14 Jun 2000

5340-14-433-6215
Rod End Clevis

144336215
45152345: RNCC: 3 | RNVC: 2

2 Aug 1989

5340-14-546-6928
Access Cover

145466928
5010636823: RNCC: 3 | RNVC: 2

2 Aug 2005

5340-14-404-5765
Anchor Strap

144045765
38165173: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-385-9882
Anchor Strap

143859882
5000890245: RNCC: 3 | RNVC: 2
5000890245: RNCC: 5 | RNVC: 9

24 Aug 1983

5340-14-345-8479
Access Cover

143458479
17712: RNCC: 3 | RNVC: 2

5 Nov 1977

5340-14-498-8981
Synchro Clamp

144988981
058626S2234: RNCC: 3 | RNVC: 2
058626S: RNCC: 5 | RNVC: 2
F300 0T 010 7790: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-548-4911
Pipe Hanger

145484911
5010610088: RNCC: 3 | RNVC: 2

23 Jan 2006

5340-14-512-8579
Mounting Bracket

145128579
448777: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-474-5712
Access Cover

144745712
45285197: RNCC: 3 | RNVC: 2
45285197: RNCC: 3 | RNVC: 9

22 Feb 1995

5340-14-506-9013
Mounting Bracket

145069013
MB3361F01: RNCC: 3 | RNVC: 2

27 May 1998

5340-14-486-0924
Mounting Plate

144860924
07325: RNCC: 3 | RNVC: 2

28 Feb 1997

5340-14-428-0913
Mounting Plate

144280913
123484: RNCC: 3 | RNVC: 2

29 Nov 1988

5340-14-539-5647
Angle Bracket

145395647
10606369: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-460-8968
Synchro Clamp

144608968
ALZ090055022001: RNCC: 3 | RNVC: 2

15 Feb 1993

5340-14-470-3209
Rigid Caster

144703209
PS4570: RNCC: 3 | RNVC: 2
PS4570: RNCC: 3 | RNVC: 2
91712702: RNCC: 5 | RNVC: 2

15 Jun 1994

5340-14-487-5591
Turnbuckle Body

144875591
43905DG0640D: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-374-4943
Angle Bracket

143744943
A11A232752140: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-552-0334
Access Cover

145520334
0249170020: RNCC: 3 | RNVC: 2

21 Nov 2006

5340-14-548-8765
Mounting Bracket

145488765
0298710300: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-14-361-5646
Retaining Strap

143615646
24055000600: RNCC: 3 | RNVC: 2
240550006: RNCC: 5 | RNVC: 9

24 Jan 1980

5340-14-332-9792
Webbing Strap

143329792
192073: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-477-1272
Mounting Bracket

144771272
5010054729: RNCC: 3 | RNVC: 2

26 Jul 1995

5340-14-351-1002
Loop Clamp

143511002
193379: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-280-7302
Loop Clamp

142807302
179956: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-266-2128
Angle Bracket

142662128
450634: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-521-4986
Mounting Plate

145214986
F00209702: RNCC: 3 | RNVC: 2
F00209702: RNCC: 5 | RNVC: 9

2 Aug 2000

5340-14-300-0843
Access Cover

143000843
180284: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-318-5821
Retaining Strap

143185821
C1-48090: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-286-8875
Rod End Clevis

142868875
A10-29-200-38-1: RNCC: 3 | RNVC: 2
A10-29-200-38-1: RNCC: 5 | RNVC: 2
A10-29-200-38-1: RNCC: 5 | RNVC: 2
85-666-1570: RNCC: 6 | RNVC: 9

1 Jan 1972

5340-14-424-2104
Rod End Connector

144242104
306-2N14: RNCC: 3 | RNVC: 2
129APFN14: RNCC: 5 | RNVC: 2
306-2-14TYPEN: RNCC: 5 | RNVC: 2
129APF14TYPEN: RNCC: 5 | RNVC: 2
13-203-135: RNCC: 5 | RNVC: 2

19 May 1988

5340-14-421-0941
Leaf Spring

144210941
0915-401-350A: RNCC: 3 | RNVC: 2

6 Jan 1988

5340-14-284-2524
Retaining Strap

142842524
78567-5: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-530-7836
Rim Latch Set

145307836
CB.2.4.1: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-474-2449
Arched Cushion

144742449
MAT169-0012F22DE12: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-14-378-1203
Mending Plate

143781203
P711900-0: RNCC: 3 | RNVC: 2

20 Jul 1982

5340-14-346-5980
Rod End Clevis

143465980
2-14582: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-315-7364
Pipe Hanger

143157364
321A84-0080-00: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-501-1471
Mounting Plate

145011471
014-005-008: RNCC: 3 | RNVC: 2
014.005.008: RNCC: 3 | RNVC: 2
F300 0T 025 1873: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-514-1739
Access Cover

145141739
15261-7391-0: RNCC: 3 | RNVC: 2

28 Apr 1999

5340-14-460-2853
Corner Brace

144602853
TB3011501: RNCC: 3 | RNVC: 2

21 Jan 1993

5340-14-522-0752
Retaining Clip

145220752
CHXBF1-8: RNCC: 3 | RNVC: 2

3 Oct 2000

5340-14-309-7010
Access Cover

143097010
A46447-3: RNCC: 3 | RNVC: 2
A46447-3: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-324-0928
Mending Plate

143240928
466-9M4P37: RNCC: 3 | RNVC: 2
466-9M4P37: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-301-5378
Expansion Shield

143015378
TETRA45: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-505-0217
Mounting Plate

145050217
5010114399: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-359-6390
Retaining Band

143596390
0000409366: RNCC: 3 | RNVC: 2
0000409366: RNCC: 5 | RNVC: 9
409366: RNCC: 5 | RNVC: 9

15 Oct 1979

5340-14-392-7817
Bumper

143927817
400123: RNCC: 3 | RNVC: 2
BGE400123: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-547-5228
Angle Bracket

145475228
RA1M704754431W1: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-370-9704
Loop Clamp

143709704
7299: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-546-7640
Angle Bracket

145467640
RA1M705216211: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-14-451-8105
Webbing Strap

144518105
103745: RNCC: 3 | RNVC: 2
89411384: RNCC: 5 | RNVC: 2

4 Dec 1991

5340-14-398-8887
Angle Bracket

143988887
22382482: RNCC: 3 | RNVC: 2
22382482: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-451-2431
Mounting Plate

144512431
PM1A334110112U1: RNCC: 3 | RNVC: 2
PM1A334110112U1: RNCC: 5 | RNVC: 2

6 Nov 1991

5340-14-510-0177
Mounting Bracket

145100177
23C1081: RNCC: 3 | RNVC: 2
1005AA2003652: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-549-0917
Angle Bracket

145490917
RA1M703655411N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-517-8713
Corner Brace

145178713
36015106: RNCC: 3 | RNVC: 2

17 Jan 2000

5340-14-536-4631
Webbing Strap

145364631
010546044P: RNCC: 3 | RNVC: 2

26 Aug 2003

5340-14-520-0482
Loop Clamp

145200482
1165050504: RNCC: 3 | RNVC: 2

9 May 2000

5340-14-441-4673
Swivel Caster

144414673
04110: RNCC: 3 | RNVC: 2

29 Aug 1990

5340-14-395-0455
Retaining Band

143950455
0298181110: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-406-0986
Angle Bracket

144060986
301941: RNCC: 3 | RNVC: 2
301941: RNCC: 5 | RNVC: 9

8 Jan 1986

5340-14-533-6742
Mounting Bracket

145336742
F1262961: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-14-366-8125
Angle Bracket

143668125
970197: RNCC: 3 | RNVC: 2
970197: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-534-4127
Mounting Bracket

145344127
1SH41764730: RNCC: 3 | RNVC: 2

24 Mar 2003

5340-14-551-5764
Retaining Band

145515764
MBT14S: RNCC: 3 | RNVC: 2
91851456: RNCC: 5 | RNVC: 2

5 Oct 2006

5340-14-542-2990
Mounting Bracket

145422990
962658908: RNCC: 3 | RNVC: 2
962658908: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-418-0947
Angle Bracket

144180947
554017: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-301-3607
Clamping Catch

143013607
GP30IB: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-359-1430
Block Clamp

143591430
A11A704106040: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-500-5719
Mounting Bracket

145005719
7308: RNCC: 3 | RNVC: 2
F300 0T 024 5903: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-480-4875
Metal Grille

144804875
GFACA08: RNCC: 3 | RNVC: 2
F0026310: RNCC: 5 | RNVC: 9

14 Mar 1996

5340-14-365-7487
Bridge Clamp

143657487
2631D: RNCC: 3 | RNVC: 9

8 Oct 1980

5340-14-306-4415
Detent Plunger

143064415
051800: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-480-7443
Runner

144807443
34 62 17: RNCC: 3 | RNVC: 2

28 Mar 1996

5340-14-366-2772
Angle Bracket

143662772
A11A221176520A1: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-14-257-7527
Retaining Strap

142577527
9137875: RNCC: 3 | RNVC: 2
9137875: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-518-1890
Bow Handle

145181890
7701000936: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-495-2966
Door Handle

144952966
6202010700: RNCC: 3 | RNVC: 2
F300 0T 018 9707: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-332-9689
Mending Plate

143329689
184078: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-381-5565
Mending Plate

143815565
398002171001: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-462-7331
Plate Spacer

144627331
PM1A646134001A1: RNCC: 3 | RNVC: 2
PM1A646134001A1: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-14-446-0021
Mounting Bracket

144460021
23110015-4: RNCC: 3 | RNVC: 2

4 Mar 1991

5340-14-485-6072
Rod End Connector

144856072
280827: RNCC: 3 | RNVC: 2
TYPE A 607: RNCC: 5 | RNVC: 2
V 280827: RNCC: 5 | RNVC: 2

5 Feb 1997

5340-14-417-8083
Quick Release Pin

144178083
3001TMA114: RNCC: 3 | RNVC: 2

27 Jul 1987

5340-14-272-8430
Bumper

142728430
X11: RNCC: 3 | RNVC: 2
29050: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-539-4744
Bridge Clamp

145394744
5000763922: RNCC: 3 | RNVC: 2

15 Jan 2004

5340-14-430-0633
Angle Bracket

144300633
23126908-1: RNCC: 3 | RNVC: 2

28 Feb 1989

5340-14-408-2203
Control Rod

144082203
GAM051096: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-496-4244
Mounting Bracket

144964244
F120131: RNCC: 3 | RNVC: 2
F300 0T 021 5145: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-551-4665
Mounting Bracket

145514665
716753: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-454-2345
Webbing Strap

144542345
TB2030106: RNCC: 3 | RNVC: 2

26 Mar 1992

5340-14-443-8759
Loop Clamp

144438759
240691900: RNCC: 3 | RNVC: 2
24FE19: RNCC: 5 | RNVC: 2

11 Dec 1990

5340-14-311-8316
Retaining Strap

143118316
410235: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-453-7237
Mounting Plate

144537237
7524067: RNCC: 3 | RNVC: 2
5010054769: RNCC: 5 | RNVC: 2
OCO7524067: RNCC: 5 | RNVC: 2

5 Mar 1992

5340-14-379-7395
Runner

143797395
2206-371C503: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-522-2243
Mounting Bracket

145222243
171040: RNCC: 3 | RNVC: 2
89525716: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-14-446-7057
Mounting Plate

144467057
T0P7A4BR: RNCC: 3 | RNVC: 2

9 Apr 1991

5340-14-525-8377
Mounting Bracket

145258377
G113022: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-520-3818
Mounting Bracket

145203818
46516849: RNCC: 3 | RNVC: 9

17 May 2000

5340-14-523-2157
Pipe Hanger

145232157
RA1B702316029: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-480-0864
Shelf Bracket

144800864
RA1M121337320: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-536-4195
Mounting Bracket

145364195
T537A2005186: RNCC: 3 | RNVC: 2

5 Aug 2003

5340-14-500-9458
Mounting Plate

145009458
E69101410000: RNCC: 3 | RNVC: 2
F300 0T 024 9670: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-433-4293
Loop Clamp

144334293
0849026P00: RNCC: 3 | RNVC: 2

25 Jul 1989

5340-14-555-0935
Bow Handle

145550935
82154971000: RNCC: 3 | RNVC: 2

27 Sep 2007

5340-14-476-5119
Loop Clamp

144765119
29452726: RNCC: 3 | RNVC: 2

15 Jun 1995

5340-14-284-9338
Bow Handle

142849338
156472: RNCC: 3 | RNVC: 2
156472: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-387-2461
Retaining Strap

143872461
398852: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-14-450-4301
Angle Bracket

144504301
SUF030055021001: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-14-486-3707
Loop Clamp

144863707
51211905011: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-356-3086
Angle Bracket

143563086
5001GRS103: RNCC: 3 | RNVC: 2

25 Apr 1979

5340-14-425-1434
Mounting Plate

144251434
0749340Y00: RNCC: 3 | RNVC: 2

22 Jun 1988

5340-14-489-9694
Mounting Plate

144899694
261670Y: RNCC: 3 | RNVC: 2

3 Sep 1997

5340-14-301-0487
Angle Bracket

143010487
1030432505: RNCC: 3 | RNVC: 2
1030432505: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-467-1115
Mending Plate

144671115
201340: RNCC: 3 | RNVC: 2
89170620: RNCC: 5 | RNVC: 2

16 Dec 1993

5340-14-405-6135
Loop Clamp

144056135
51425305011: RNCC: 3 | RNVC: 2
28SE11: RNCC: 5 | RNVC: 2

4 Dec 1985

5340-14-452-1118
Mounting Plate

144521118
31723081: RNCC: 3 | RNVC: 9

18 Dec 1991

5340-14-553-5127
Utility Access Door

145535127
18842864-5: RNCC: 3 | RNVC: 2
X25047-001: RNCC: 5 | RNVC: 2

11 Apr 2007

5340-14-471-2913
Retaining Band

144712913
502-517-761-0: RNCC: 3 | RNVC: 2
85-695-3321: RNCC: 6 | RNVC: 9

10 Aug 1994

5340-14-530-6111
Mounting Plate

145306111
888-455-900-1: RNCC: 3 | RNVC: 2

26 Jun 2002

5340-14-483-7281
Loop Clamp

144837281
501-875-521-0: RNCC: 3 | RNVC: 2

27 Sep 1996

5340-14-475-2524
Mounting Plate

144752524
332A76-3190-00: RNCC: 3 | RNVC: 2

22 Mar 1995

5340-14-298-1902
Retaining Strap

142981902
23030297: RNCC: 3 | RNVC: 2
23030297-8: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-287-2387
Angle Bracket

142872387
23030129: RNCC: 3 | RNVC: 2
23030129-9: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-308-4029
Loop Clamp

143084029
E4P830-018: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-341-3323
Loop Clamp

143413323
262-50-50514-21: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-549-9619
Mounting Bracket

145499619
169E771-00: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-201-9184
Retaining Strap

142019184
574-308-140-0: RNCC: 3 | RNVC: 2

1 Jan 1962

5340-14-464-7552
Strap Fastener Loop

144647552
330A87-2378-00: RNCC: 3 | RNVC: 2

1 Sep 1993

5340-14-526-0764
Arched Cushion

145260764
E1M371230: RNCC: 3 | RNVC: 2
MAT169-0024F12FORTERAIDEUR: RNCC: 3 | RNVC: 2

2 Jul 2001

5340-14-506-9408
Butt Hinge

145069408
HL50-400300: RNCC: 3 | RNVC: 2

27 May 1998

5340-14-462-6629
Angle Bracket

144626629
5171600900: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-14-288-4114
Mounting Plate

142884114
0224317010: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-514-5212
Safety Cable Kit

145145212
371267B: RNCC: 3 | RNVC: 2

26 May 1999

5340-14-208-4897
Loop Clamp

142084897
060886: RNCC: 3 | RNVC: 2
M060886: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-550-4810
Angle Bracket

145504810
RA1A702436159: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-266-2377
Retaining Strap

142662377
153834: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-533-4230
Mounting Plate

145334230
2714145: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-508-0189
Webbing Strap

145080189
4773123330: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-395-9670
Angle Bracket

143959670
210345: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-507-5821
Door Handle

145075821
18.40130: RNCC: 3 | RNVC: 2

23 Jul 1998

5340-14-497-6166
Mounting Plate

144976166
4K9937: RNCC: 3 | RNVC: 2
F300 0T 023 4203: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-351-0037
Angle Bracket

143510037
207702: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-479-4626
Mounting Bracket

144794626
CEPK332800028REP2: RNCC: 3 | RNVC: 2

15 Jan 1996

5340-14-550-4753
Pipe Hanger

145504753
RA1B701666866N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-526-9701
Mounting Bracket

145269701
10529693: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-520-7597
Metal Grille

145207597
46038949: RNCC: 3 | RNVC: 2

14 Jun 2000

5340-14-402-4305
Threaded Rod End

144024305
20376207: RNCC: 3 | RNVC: 2

3 Jul 1985

5340-14-394-8888
Bumper

143948888
403894: RNCC: 3 | RNVC: 2
403894: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-457-3574
Retaining Strap

144573574
45614636: RNCC: 3 | RNVC: 9

27 Aug 1992

5340-14-461-6301
Mounting Bracket

144616301
1DM164904: RNCC: 3 | RNVC: 2
91714300: RNCC: 5 | RNVC: 2

17 Mar 1993

5340-14-519-4709
Mounting Bracket

145194709
252274480: RNCC: 3 | RNVC: 2
542380: RNCC: 5 | RNVC: 2

22 Mar 2000

5340-14-344-9810
Retaining Strap

143449810
33209: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-393-4412
Mending Plate

143934412
0288860690: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-530-2369
Retaining Bail

145302369
EAW9202 CHROMATAGE NOIR: RNCC: 3 | RNVC: 2

22 May 2002

5340-14-535-4076
Mounting Bracket

145354076
5010477181: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-553-5926
Mounting Plate

145535926
T652M1001201: RNCC: 3 | RNVC: 2

19 Apr 2007

5340-14-471-7750
Arched Cushion

144717750
5000915817: RNCC: 3 | RNVC: 2

14 Sep 1994

5340-14-509-6527
Mounting Plate

145096527
RA1M124101460N1: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-453-2777
Angle Bracket

144532777
MS102: RNCC: 3 | RNVC: 2
99028935: RNCC: 5 | RNVC: 2

12 Feb 1992

5340-14-461-6619
Expansion Plug

144616619
VK47X10: RNCC: 3 | RNVC: 2
RAR3545: RNCC: 5 | RNVC: 2

19 Mar 1993

5340-14-519-5516
Mounting Plate

145195516
444063: RNCC: 3 | RNVC: 9

22 Mar 2000

5340-14-462-9012
Mounting Plate

144629012
1DM165004: RNCC: 3 | RNVC: 2
91714226: RNCC: 5 | RNVC: 2

5 May 1993

5340-14-520-4727
Mounting Bracket

145204727
10471635: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-481-3675
Mounting Bracket

144813675
10279256: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-527-2909
Detent Plunger

145272909
10420518: RNCC: 3 | RNVC: 2

19 Oct 2001

5340-14-420-0652
Armature Stop

144200652
46417: RNCC: 3 | RNVC: 2

18 Nov 1987

5340-14-545-6951
Angle Bracket

145456951
RA1M703856371N1: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-416-4462
Detent Plunger

144164462
0763543M02: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-14-370-5912
Angle Bracket

143705912
A11A234352061N1: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-549-0716
Mounting Bracket

145490716
RA1M215190121: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-512-6045
Eye Hook

145126045
4064A543: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-517-7031
Access Cover

145177031
4238-9: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-480-3810
Mounting Bracket

144803810
34 59 75: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-540-5273
Bow Handle

145405273
19205960: RNCC: 3 | RNVC: 2

1 Apr 2004

5340-14-447-6298
Angle Bracket

144476298
5000137182: RNCC: 3 | RNVC: 2

29 May 1991

5340-14-277-7287
Retaining Strap

142777287
9136114: RNCC: 3 | RNVC: 2
9136114: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-542-9079
Eye Hook

145429079
701S/C: RNCC: 3 | RNVC: 2
701S/C: RNCC: 5 | RNVC: 2

14 Aug 2004

5340-14-403-9300
Anchor Strap

144039300
33464-1: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-415-5920
Rod End Connector

144155920
85458: RNCC: 3 | RNVC: 2

18 May 1987

5340-14-408-0353
Access Cover

144080353
23606561-5: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-345-0604
Retaining Strap

143450604
326416: RNCC: 3 | RNVC: 2
20326416-6: RNCC: 5 | RNVC: 2

5 Oct 1977

5340-14-527-3382
Rod End Clevis

145273382
A65453-4: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-395-5739
Mending Plate

143955739
5-1881B43152-352: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-394-2117
Flush Catch

143942117
300: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-212-0409
Mending Plate

142120409
28015109-5: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-361-6824
Rod End Connector

143616824
5000495133: RNCC: 3 | RNVC: 2
5000495133: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-14-503-5869
Access Cover

145035869
47029674: RNCC: 3 | RNVC: 2

21 Jan 1998

5340-14-354-2420
Access Cover

143542420
16321219: RNCC: 3 | RNVC: 2
16321219: RNCC: 5 | RNVC: 9

30 Jan 1979

5340-14-367-4335
Access Cover

143674335
15455229: RNCC: 3 | RNVC: 2
15455229: RNCC: 5 | RNVC: 2
15455229: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-528-4306
Access Cover

145284306
320065: RNCC: 3 | RNVC: 2
320065: RNCC: 5 | RNVC: 9

29 Jan 2002

5340-14-554-3526
Mounting Bracket

145543526
82190413000: RNCC: 3 | RNVC: 2

22 Jun 2007

5340-14-367-6167
Retaining Strap

143676167
132599E: RNCC: 3 | RNVC: 2
MAF0001004186: RNCC: 6 | RNVC: 9

19 Jan 1981

5340-14-358-7157
Rod End Clevis

143587157
8811510011: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-245-1549
Anchor Strap

142451549
70483406: RNCC: 3 | RNVC: 2
483406: RNCC: 5 | RNVC: 9
70483406: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-393-1262
Retaining Strap

143931262
02142036700: RNCC: 3 | RNVC: 2
021420367: RNCC: 5 | RNVC: 2

12 Apr 1984

5340-14-363-0897
Retaining Clip

143630897
BJM00109: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-14-458-1352
Anchor Strap

144581352
70426-904: RNCC: 3 | RNVC: 2
5045487: RNCC: 5 | RNVC: 9

8 Oct 1992

5340-14-502-4880
Access Cover

145024880
5000251826: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-407-4305
Clamping Catch

144074305
260AN50MM: RNCC: 3 | RNVC: 2

12 Feb 1986

5340-14-207-8825
Rod End Clevis

142078825
3114115: RNCC: 3 | RNVC: 2
F636K36: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-506-5826
Access Cover

145065826
NNP5340838309242: RNCC: 3 | RNVC: 9

29 Apr 1998

5340-14-555-5551
Access Cover

145555551
10659538: RNCC: 3 | RNVC: 2

27 Nov 2007

5340-14-325-8697
Kick Door Plate

143258697
15029913: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-032-1132
Anchor Strap

140321132
A11A742321013: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-031-0673
Access Cover

140310673
VDP2067: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-515-4095
Loop Clamp

145154095
21610068A: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-472-2920
Access Cover

144722920
1559395: RNCC: 3 | RNVC: 2
1559395: RNCC: 5 | RNVC: 2

18 Oct 1994

5340-14-456-2871
Access Cover

144562871
4172I2: RNCC: 3 | RNVC: 2
89406811: RNCC: 5 | RNVC: 2

25 Jun 1992

5340-14-375-8919
Anchor Strap

143758919
5000112884: RNCC: 3 | RNVC: 2
5000112884: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-534-6274
Access Cover

145346274
DA1S203912: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-14-475-4178
Access Cover

144754178
747356: RNCC: 3 | RNVC: 2

5 Apr 1995

5340-14-305-7967
Access Cover

143057967
4086DET10A: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-494-4812
Mounting Bracket

144944812
T54 288 70: RNCC: 3 | RNVC: 2
F300 0T 017 3865: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-544-4516
Utility Access Door

145444516
5010527161: RNCC: 3 | RNVC: 2

1 Feb 2005

5340-14-511-6076
Runner

145116076
AER320520: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-439-0012
Access Cover

144390012
1180260: RNCC: 3 | RNVC: 2
1180260: RNCC: 5 | RNVC: 2

18 Apr 1990

5340-14-536-1902
Access Cover

145361902
803237140114: RNCC: 3 | RNVC: 2

15 Jul 2003

5340-14-384-6616
Access Cover

143846616
16761605: RNCC: 3 | RNVC: 2
16761605: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-537-6382
Access Cover

145376382
61028619AA: RNCC: 3 | RNVC: 2

17 Nov 2003

5340-14-370-7273
Access Cover

143707273
215369: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-521-1555
Access Cover

145211555
F1263677: RNCC: 3 | RNVC: 2
F1263677: RNCC: 5 | RNVC: 2

12 Jul 2000

5340-14-460-0120
Utility Access Door

144600120
39449770: RNCC: 3 | RNVC: 2
39449770: RNCC: 5 | RNVC: 9

7 Jan 1993

5340-14-210-6498
Rod End Clevis

142106498
0000473645: RNCC: 3 | RNVC: 2
0000473645: RNCC: 5 | RNVC: 9
473645: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-303-4518
Rod End Clevis

143034518
38626: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-553-9879
Access Cover

145539879
156 592: RNCC: 3 | RNVC: 2
156 592: RNCC: 3 | RNVC: 2

6 Jun 2007

5340-14-357-4563
Anchor Strap

143574563
A11A234320003: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-556-1862
Access Hole Frame

145561862
82407811000: RNCC: 3 | RNVC: 2

11 Feb 2008

5340-14-396-0641
Anchor Strap

143960641
VDPV3502: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-536-2003
Access Cover

145362003
F1397838: RNCC: 3 | RNVC: 2

15 Jul 2003

5340-14-372-8539
Access Cover

143728539
19305334: RNCC: 3 | RNVC: 2

21 Sep 1981

5340-14-520-1553
Access Cover

145201553
CCN301520500A2: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-503-1481
Access Cover

145031481
PM1A231243A1: RNCC: 3 | RNVC: 2
PM1A231243A1: RNCC: 5 | RNVC: 2

7 Jan 1998

5340-14-394-9368
Access Cover

143949368
20257674: RNCC: 3 | RNVC: 2
20257674: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-528-8104
Access Cover

145288104
RA1M622245820A1: RNCC: 3 | RNVC: 2

18 Feb 2002

5340-14-364-7524
Access Cover

143647524
533355: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-14-293-3786
Access Cover

142933786
0000440160: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-381-1491
Rod End Clevis

143811491
CH5BLAVECAXE: RNCC: 3 | RNVC: 2
BBZ0366: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-530-5283
Access Cover

145305283
W004340820: RNCC: 3 | RNVC: 2

18 Jun 2002

5340-14-446-2395
Handwheel

144462395
095147V: RNCC: 3 | RNVC: 2

11 Mar 1991

5340-14-547-0034
Runner

145470034
RA1M312319181N1: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-14-467-7584
Loop Clamp

144677584
PE89008: RNCC: 3 | RNVC: 2

27 Jan 1994

5340-14-522-6978
Mounting Plate

145226978
01312001: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-14-312-4002
Butt Hinge

143124002
16274563: RNCC: 3 | RNVC: 2
16274563: RNCC: 5 | RNVC: 2
16274563: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-548-2415
Mounting Bracket

145482415
1SH41806792: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-14-526-1308
Retaining Strap

145261308
N125236: RNCC: 3 | RNVC: 2

4 Jul 2001

5340-14-551-2829
Mounting Bracket

145512829
RA1M703616111N1: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-313-8217
Access Cover

143138217
M606228: RNCC: 3 | RNVC: 2
M606228: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-522-6975
Mounting Bracket

145226975
01248028: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-14-295-1811
Rod End Clevis

142951811
81975: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-483-4132
Mounting Bracket

144834132
OSS00049: RNCC: 3 | RNVC: 2

12 Sep 1996

5340-14-447-6555
Retaining Strap

144476555
16629297: RNCC: 3 | RNVC: 2
16629297: RNCC: 5 | RNVC: 9

29 May 1991

5340-14-285-6572
Mending Plate

142856572
76752: RNCC: 3 | RNVC: 9
45721: RNCC: 5 | RNVC: 9
062076752: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-552-8833
Mounting Plate

145528833
82034428000: RNCC: 3 | RNVC: 2

10 Feb 2007

5340-14-440-3948
Cover Strip

144403948
DA1N201732426: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-539-5364
Cover Strip

145395364
SZ11.251.161: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-542-6090
Mounting Bracket

145426090
8045666C00: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-14-372-0091
Access Cover

143720091
16603360: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-571-1296
Utility Access Door

145711296
08329: RNCC: 3 | RNVC: 2
3303430083290: RNCC: 5 | RNVC: 2

21 Feb 2012

5340-14-297-4596
Mounting Bracket

142974596
Z26: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-481-6331
Mounting Plate

144816331
1110288E00: RNCC: 3 | RNVC: 2

23 May 1996

5340-14-500-6059
Runner

145006059
9350162680: RNCC: 3 | RNVC: 2
F300 0T 024 6243: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-370-5065
Retaining Strap

143705065
253227: RNCC: 3 | RNVC: 2
253227: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-428-6295
Block Clamp

144286295
LB11211556019: RNCC: 3 | RNVC: 2
11211556019: RNCC: 5 | RNVC: 2

8 Dec 1988

5340-14-418-1141
Butt Hinge

144181141
BJM00499P: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-399-1336
Loop Clamp

143991336
602483: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-405-6200
Access Cover

144056200
0907-140-700A: RNCC: 3 | RNVC: 2

4 Dec 1985

5340-14-545-9066
Metal Grille

145459066
47079914: RNCC: 3 | RNVC: 2

26 May 2005

5340-14-541-7484
Mounting Bracket

145417484
8021765D00: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-545-2248
Mounting Bracket

145452248
61467173AA: RNCC: 3 | RNVC: 2

25 Mar 2005

5340-14-382-3900
Angle Bracket

143823900
BAZ97172: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-541-5901
Mounting Bracket

145415901
908750: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-383-2640
Rod End Clevis

143832640
PR47362: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-366-9323
Anchor Strap

143669323
003104080P: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-548-3889
Rim Lock Set

145483889
21937: RNCC: 3 | RNVC: 2

12 Jan 2006

5340-14-231-5957
Rod End Clevis

142315957
947S: RNCC: 3 | RNVC: 9
1217AP: RNCC: 5 | RNVC: 9
947: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-551-5080
Angle Bracket

145515080
RA1M705616511A1: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-393-5437
Access Cover

143935437
903456: RNCC: 3 | RNVC: 2

23 Jul 1997

5340-14-540-6500
Mounting Bracket

145406500
38051393: RNCC: 3 | RNVC: 2
438583: RNCC: 5 | RNVC: 2
4848ZG8613180213: RNCC: 6 | RNVC: 9

14 Apr 2004

5340-14-539-5543
Mounting Plate

145395543
SZ09.402.680: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-471-9447
Access Cover

144719447
38019263: RNCC: 3 | RNVC: 2
38019263: RNCC: 5 | RNVC: 9

28 Sep 1994

5340-14-545-7384
Access Cover

145457384
F1264034: RNCC: 3 | RNVC: 2

4 May 2005

5340-14-544-3558
Mounting Plate

145443558
S257A1018120: RNCC: 3 | RNVC: 2

24 Jan 2005

5340-14-439-8846
Bridge Clamp

144398846
06609: RNCC: 3 | RNVC: 2

30 May 1990

5340-14-250-9363
Loop Clamp

142509363
C4909: RNCC: 3 | RNVC: 2
9560113330: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-349-7351
Rod End Clevis

143497351
0249970300: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-296-5640
Access Cover

142965640
707264: RNCC: 3 | RNVC: 2
707264: RNCC: 5 | RNVC: 2
707264: RNCC: 5 | RNVC: 9
N147392: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-526-9401
Mounting Bracket

145269401
21230773-00: RNCC: 3 | RNVC: 2
21230773-2: RNCC: 5 | RNVC: 2

19 Sep 2001

5340-14-539-7441
Mounting Plate

145397441
21034047-00: RNCC: 3 | RNVC: 2
21034047-4: RNCC: 5 | RNVC: 2

5 Feb 2004

5340-14-298-1027
Strap Fastener Loop

142981027
NO PRIMARY REF14-298-1027: RNCC: 3 | RNVC: 2
88273: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-308-1400
Retaining Strap

143081400
501-422-629-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-339-5751
Rod End Clevis

143395751
10-160-210-2: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-549-3613
Mounting Bracket

145493613
16920: RNCC: 3 | RNVC: 2

27 Mar 2006

5340-14-408-4429
Control Rod

144084429
RSM38001: RNCC: 3 | RNVC: 2

27 Mar 1986

5340-14-549-6745
Access Cover

145496745
G-4457: RNCC: 3 | RNVC: 2

26 Apr 2006

5340-14-547-7734
Mounting Bracket

145477734
5000333892: RNCC: 3 | RNVC: 2

12 Nov 2005

5340-14-481-2203
Mounting Plate

144812203
90 04 30: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-14-368-3555
Angle Bracket

143683555
406432658: RNCC: 3 | RNVC: 9
456432658: RNCC: 5 | RNVC: 9
6432658: RNCC: 5 | RNVC: 9

20 Feb 1981

5340-14-445-5367
Bumper

144455367
16930124: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-14-525-7642
Loop Clamp

145257642
301520W1: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-478-4932
Bow Handle

144784932
61453: RNCC: 3 | RNVC: 2

8 Nov 1995

5340-14-522-1332
Butt Hinge

145221332
10554954: RNCC: 3 | RNVC: 2

4 Oct 2000

5340-14-452-3336
Access Cover

144523336
234277Y: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-502-8653
Mounting Bracket

145028653
9R9319: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-293-3801
Access Cover

142933801
0064581290: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-500-6463
Section Block Clamp

145006463
E64009998037: RNCC: 3 | RNVC: 2
F300 0T 024 6649: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-432-6418
Protection Bellows

144326418
105391: RNCC: 3 | RNVC: 2
8098707: RNCC: 5 | RNVC: 2

19 Jun 1989

5340-14-387-3501
Bumper

143873501
F0477CD: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-14-508-6934
Access Cover

145086934
823 105 000: RNCC: 3 | RNVC: 2
823 105 000: RNCC: 5 | RNVC: 9

25 Sep 1998

5340-14-546-6937
Access Cover

145466937
5010631523: RNCC: 3 | RNVC: 2

2 Aug 2005

5340-14-392-1952
Access Cover

143921952
29003529: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-507-6921
Access Cover

145076921
10346606: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-14-317-6979
Retaining Strap

143176979
466-8M6P269: RNCC: 3 | RNVC: 2
466-8M6P269: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-439-6875
Utility Access Door

144396875
16294671: RNCC: 3 | RNVC: 2
16294671: RNCC: 5 | RNVC: 9

16 May 1990

5340-14-357-0475
Retaining Strap

143570475
388317: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-420-4613
Angle Bracket

144204613
06152177: RNCC: 3 | RNVC: 2

10 Dec 1987

5340-14-544-3408
Mounting Plate

145443408
82062575000: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-14-227-1627
Rod End Clevis

142271627
STC156271G: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-326-0661
Access Cover

143260661
282066: RNCC: 3 | RNVC: 2
282066: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-338-7292
Angle Bracket

143387292
179491: RNCC: 3 | RNVC: 2
5171509000: RNCC: 3 | RNVC: 2
715090: RNCC: 5 | RNVC: 9

17 Dec 1976

5340-14-433-8378
Access Cover

144338378
071594F: RNCC: 3 | RNVC: 2

16 Aug 1989

5340-14-438-7312
Anchor Strap

144387312
1188827: RNCC: 3 | RNVC: 2
1188827: RNCC: 5 | RNVC: 2

2 Apr 1990

5340-14-351-2161
Lock-Release Lever

143512161
487266M: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-554-9108
Mounting Bracket

145549108
82116581000: RNCC: 3 | RNVC: 2

6 Sep 2007

5340-14-448-1507
Retaining Strap

144481507
21S0400802: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-14-386-1897
Anchor Strap

143861897
20729467: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-425-5946
Access Cover

144255946
569469: RNCC: 3 | RNVC: 2

12 Jul 1988

5340-14-497-1882
Loop Clamp

144971882
68939007: RNCC: 3 | RNVC: 2
95000978: RNCC: 3 | RNVC: 2
F300 0T 022 7997: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-346-9482
Retaining Strap

143469482
C57591: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-14-425-2663
Loop Clamp

144252663
RPA079085000120: RNCC: 3 | RNVC: 2

29 Jun 1988

5340-14-487-5539
Angle Bracket

144875539
78721DH29A1: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-488-4887
Angle Bracket

144884887
45837295: RNCC: 3 | RNVC: 9

14 May 1997

5340-14-447-9949
Mounting Bracket

144479949
M4Z6021961001: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-14-542-0993
Loop Clamp

145420993
219901000: RNCC: 3 | RNVC: 2
21T10: RNCC: 5 | RNVC: 2

2 Jul 2004

5340-14-381-3641
Mending Plate

143813641
096020U: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-550-5893
Bumper

145505893
4OP463: RNCC: 3 | RNVC: 2

28 Jun 2006

5340-14-480-3623
Rigid Caster

144803623
1077147Y00: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-405-8247
Loop Clamp

144058247
0027-2021: RNCC: 3 | RNVC: 2

4 Dec 1985

5340-14-443-2915
Mounting Bracket

144432915
M85014L: RNCC: 3 | RNVC: 2

14 Nov 1990

5340-14-437-5552
Loop Clamp

144375552
12-670-900: RNCC: 3 | RNVC: 2
12-670-900: RNCC: 5 | RNVC: 9

7 Feb 1990

5340-14-350-4477
Bow Handle

143504477
208406: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-388-8080
Buckle

143888080
005416013P: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-396-5229
Angle Bracket

143965229
214010: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-434-0169
Mounting Plate

144340169
RP981310: RNCC: 3 | RNVC: 2

29 Aug 1989

5340-14-520-9028
Access Cover

145209028
10444943: RNCC: 3 | RNVC: 2

21 Jun 2000

5340-14-523-2621
Block Clamp

145232621
RA1M704734543A2: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-554-3306
Mounting Bracket

145543306
82104592002: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-532-1342
Utility Access Door

145321342
5010559852: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-14-489-4359
Mounting Plate

144894359
3BM01181AAAA: RNCC: 3 | RNVC: 2
3BM01181AAAA: RNCC: 5 | RNVC: 9

23 Jul 1997

5340-14-522-1147
Access Cover

145221147
8194887: RNCC: 3 | RNVC: 2
8194887: RNCC: 5 | RNVC: 2

4 Oct 2000

5340-14-432-7432
Loop Clamp

144327432
406425R: RNCC: 3 | RNVC: 2

21 Jun 1989

5340-14-554-1747
Mounting Bracket

145541747
82078019000: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-222-2398
Angle Bracket

142222398
103364000: RNCC: 3 | RNVC: 9
0003438095: RNCC: 5 | RNVC: 2
0003438095: RNCC: 5 | RNVC: 9
3438095: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-443-5911
Retaining Strap

144435911
0301530970: RNCC: 3 | RNVC: 2

28 Nov 1990

Load More Results