What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 127 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 127 of 446

5340-14-428-1193
Bumper

144281193
000201482200: RNCC: 3 | RNVC: 2

1 Dec 1988

5340-14-407-1822
Retaining Strap

144071822
71578: RNCC: 3 | RNVC: 2

12 Feb 1986

5340-14-555-2782
Bow Handle

145552782
82189294000: RNCC: 3 | RNVC: 2

20 Oct 2007

5340-14-545-4628
Mounting Bracket

145454628
RA1A701626214A1: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-565-5382
Utility Access Door

145655382
98943: RNCC: 3 | RNVC: 2

31 Aug 2010

5340-14-530-0964
Angle Bracket

145300964
439 00 184: RNCC: 3 | RNVC: 2
1100535X00: RNCC: 5 | RNVC: 2

14 May 2002

5340-14-545-7279
Mounting Plate

145457279
46249486: RNCC: 3 | RNVC: 2

2 May 2005

5340-14-356-4913
Webbing Strap

143564913
52549563: RNCC: 3 | RNVC: 2

15 May 1979

5340-14-349-7948
Bumper

143497948
128005: RNCC: 3 | RNVC: 2
241280050: RNCC: 5 | RNVC: 2

14 Jun 1978

5340-14-437-9937
Mounting Plate

144379937
1369416: RNCC: 3 | RNVC: 2
KACH416: RNCC: 5 | RNVC: 2

5 Mar 1990

5340-14-290-2116
Angle Bracket

142902116
0264408010: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-521-7395
Mounting Bracket

145217395
202583: RNCC: 3 | RNVC: 2

12 Sep 2000

5340-14-471-4853
Mounting Plate

144714853
2015268Z: RNCC: 3 | RNVC: 2

31 Aug 1994

5340-14-479-2218
Mounting Plate

144792218
C92739: RNCC: 3 | RNVC: 2
C92739: RNCC: 5 | RNVC: 2
91711044: RNCC: 5 | RNVC: 2
C92739: RNCC: 5 | RNVC: 9

19 Dec 1995

5340-14-521-5844
Bumper

145215844
52141: RNCC: 3 | RNVC: 2

23 Aug 2000

5340-14-549-7853
Mounting Bracket

145497853
2092629: RNCC: 3 | RNVC: 2

12 May 2006

5340-14-549-8223
Mounting Plate

145498223
2092694-001: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-286-7940
Retaining Strap

142867940
E4M114-34-29: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-464-0137
Angle Bracket

144640137
7005-86: RNCC: 3 | RNVC: 9
9407005860: RNCC: 5 | RNVC: 9

7 Jul 1993

5340-14-477-0679
Mounting Plate

144770679
66487: RNCC: 3 | RNVC: 2
66487: RNCC: 5 | RNVC: 9
85-695-4478: RNCC: 6 | RNVC: 9

19 Jul 1995

5340-14-303-4983
Retaining Clip

143034983
NO PRIMARY REF14-303-4983: RNCC: 3 | RNVC: 2
48-23-10-216: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-440-3072
Blank Panel

144403072
3511-190-58271: RNCC: 3 | RNVC: 2
89288205: RNCC: 5 | RNVC: 2

11 Jul 1990

5340-14-321-8340
Mounting Plate

143218340
A10-67-670-08-0: RNCC: 3 | RNVC: 2
A10-67-670-08-0: RNCC: 5 | RNVC: 2
85-800-3519: RNCC: 6 | RNVC: 9

1 Jan 1975

5340-14-364-0938
Angle Bracket

143640938
366A24-0100-47: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-368-2338
Anchor Strap

143682338
75526182: RNCC: 3 | RNVC: 2
7552618280: RNCC: 5 | RNVC: 2
7552618280: RNCC: 5 | RNVC: 2
AM532-32A: RNCC: 5 | RNVC: 2

20 Feb 1981

5340-14-448-3770
Butt Hinge

144483770
SLR201-110-444: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-14-320-7822
Loop Clamp

143207822
15260M20M: RNCC: 3 | RNVC: 2
620-854-639-0: RNCC: 5 | RNVC: 2
620-854-639-0: RNCC: 5 | RNVC: 2
15260M20M: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-377-9362
Expansion Shield

143779362
90-52: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-466-1633
Lock Key

144661633
8509-00-060: RNCC: 3 | RNVC: 2
89297847: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-388-5989
Rod End Clevis

143885989
000-64279-000: RNCC: 3 | RNVC: 2
64279: RNCC: 5 | RNVC: 2

3 Nov 1983

5340-14-511-2457
Runner

145112457
429764: RNCC: 3 | RNVC: 2
429764-001: RNCC: 5 | RNVC: 9

9 Dec 1998

5340-14-325-0734
Loop Clamp

143250734
F704-35: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-285-0808
Access Cover

142850808
175-13-198: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-481-0449
Utility Access Door

144810449
0PHE02-648964A: RNCC: 3 | RNVC: 2
ED OPHD 02-648964A: RNCC: 5 | RNVC: 2
0648964A00: RNCC: 5 | RNVC: 2

18 Apr 1996

5340-14-511-2621
Plug Button

145112621
428562: RNCC: 3 | RNVC: 2
428562-001: RNCC: 5 | RNVC: 9

9 Dec 1998

5340-14-512-0143
Mounting Plate

145120143
0052349: RNCC: 3 | RNVC: 2
22511: RNCC: 3 | RNVC: 9
22511-10: RNCC: 5 | RNVC: 9

2 Feb 1999

5340-14-250-5571
Loop Clamp

142505571
8400-771: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-517-2853
Fusible Plug

145172853
NO PRIMARY REF14-517-2853: RNCC: 3 | RNVC: 2
STW2050CCC: RNCC: 5 | RNVC: 9

24 Nov 1999

5340-14-286-8270
Rod End Clevis

142868270
E4M171-12-01: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-352-6825
Retaining Clip

143526825
NO PRIMARY REF14-352-6825: RNCC: 3 | RNVC: 2
0017010: RNCC: 5 | RNVC: 9

14 Nov 1978

5340-14-438-3116
Bumper

144383116
MAT521-0016F5: RNCC: 3 | RNVC: 2

13 Mar 1990

5340-14-449-6239
Block Clamp

144496239
70-4299-000: RNCC: 3 | RNVC: 2

28 Aug 1991

5340-14-533-6781
Mounting Bracket

145336781
169E205-00: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-14-316-4644
Loop Clamp

143164644
BN418-501F11I1: RNCC: 3 | RNVC: 2
2200039: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-432-8509
Loop Clamp

144328509
853-600-019-0: RNCC: 3 | RNVC: 2

28 Jun 1989

5340-14-467-4096
Detent Plunger

144674096
1049626M00: RNCC: 3 | RNVC: 2
MAT460-03-02-A: RNCC: 5 | RNVC: 2

12 Jan 1994

5340-14-272-8079
Rim Lock

142728079
35N100C: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-548-1807
Mounting Bracket

145481807
69013047: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-14-552-6561
Angle Bracket

145526561
21233010-00: RNCC: 3 | RNVC: 2
21233010-8: RNCC: 5 | RNVC: 2

22 Jan 2007

5340-14-210-5236
Snap Hook

142105236
56090: RNCC: 3 | RNVC: 2
8830: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-500-4532
Mounting Plate

145004532
B63206100000: RNCC: 3 | RNVC: 2
F300 0T 024 4701: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-555-8181
Runner

145558181
0084004520: RNCC: 3 | RNVC: 2

17 Dec 2007

5340-14-534-7187
Mounting Bracket

145347187
10589315: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-548-1011
Mounting Bracket

145481011
RA1A701226055: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-462-5690
Mounting Plate

144625690
A87261: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-14-549-0899
Angle Bracket

145490899
RA1M701732141N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-549-9330
Mounting Bracket

145499330
F1260579: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-525-5834
Mounting Bracket

145255834
10 146 217 1001: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-446-0832
Mounting Plate

144460832
007840035P: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-400-0794
Strap Fastener Loop

144000794
161377: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-460-0118
Utility Access Door

144600118
39449750: RNCC: 3 | RNVC: 2
39449750: RNCC: 5 | RNVC: 9

7 Jan 1993

5340-14-482-8167
Access Cover

144828167
39145691: RNCC: 3 | RNVC: 2

25 Jul 1996

5340-14-366-7019
Rod End Clevis

143667019
543738: RNCC: 3 | RNVC: 2
77382000: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-321-7255
Access Cover

143217255
1643A112: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-513-1527
Retaining Band

145131527
10348845: RNCC: 3 | RNVC: 2

8 Mar 1999

5340-14-416-0533
Angle Bracket

144160533
BJM01554: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-506-9035
Mounting Bracket

145069035
MB3361F00: RNCC: 3 | RNVC: 2

27 May 1998

5340-14-555-3205
Mounting Bracket

145553205
82115972000: RNCC: 3 | RNVC: 2

24 Oct 2007

5340-14-400-8571
Retaining Strap

144008571
403097: RNCC: 3 | RNVC: 2
403097: RNCC: 5 | RNVC: 9

21 May 1985

5340-14-532-3516
Detent Plunger

145323516
1330ETJ1202003: RNCC: 3 | RNVC: 2
1330ETJ1202003: RNCC: 3 | RNVC: 9
1330 ETJ 120 20 03: RNCC: 5 | RNVC: 9

30 Oct 2002

5340-14-513-0703
Mounting Plate

145130703
800815601: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-14-488-8371
Loop Clamp

144888371
E7413687: RNCC: 3 | RNVC: 9

5 Jun 1997

5340-14-520-9747
Bow Handle

145209747
009988010P: RNCC: 3 | RNVC: 2

27 Jun 2000

5340-14-367-6232
Anchor Strap

143676232
130PAA: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-341-3073
Bumper

143413073
A11A211004043: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-461-1239
Access Cover

144611239
39056923: RNCC: 3 | RNVC: 2
39056923: RNCC: 5 | RNVC: 2

24 Feb 1993

5340-14-549-6786
Access Cover

145496786
G-4452: RNCC: 3 | RNVC: 2

26 Apr 2006

5340-14-501-1222
Mounting Plate

145011222
6371033: RNCC: 3 | RNVC: 2
F300 0T 025 1621: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-474-2954
Mounting Plate

144742954
20712719: RNCC: 3 | RNVC: 2

8 Feb 1995

5340-14-406-1237
Rim Lock

144061237
996384: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-399-7099
Bumper

143997099
IC343: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-553-1515
Retaining Strap

145531515
0249920890: RNCC: 3 | RNVC: 2

6 Mar 2007

5340-14-547-5168
Pipe Hanger

145475168
RA1M704724653: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-444-4128
Runner

144444128
20729501: RNCC: 3 | RNVC: 2
20729501: RNCC: 5 | RNVC: 9

9 Jan 1991

5340-14-298-8629
Retaining Strap

142988629
178120: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-464-3289
Mounting Bracket

144643289
ST406M75A36: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-210-8157
Corner Brace

142108157
28-762: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-447-6543
Bow Handle

144476543
16292293: RNCC: 3 | RNVC: 2
16292293: RNCC: 5 | RNVC: 9

29 May 1991

5340-14-447-3301
Loop Clamp

144473301
3170098: RNCC: 3 | RNVC: 2

15 May 1991

5340-14-534-8606
Mounting Bracket

145348606
10669300000: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-14-492-4547
Mounting Plate

144924547
5000658691: RNCC: 3 | RNVC: 2
F300 0T 007 6819: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-291-3919
Angle Bracket

142913919
0235217240: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-482-5115
Cover Strip

144825115
PM1A761156008: RNCC: 3 | RNVC: 2
PM1A761156008: RNCC: 5 | RNVC: 2

11 Jul 1996

5340-14-213-4662
Permanent Magnet

142134662
3100-58: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-485-1412
Angle Bracket

144851412
3BM00706AAAA: RNCC: 3 | RNVC: 2
3BM00706AAAA: RNCC: 5 | RNVC: 9

10 Jan 1997

5340-14-216-8306
Webbing Strap

142168306
HE60M1: RNCC: 3 | RNVC: 2
531812: RNCC: 5 | RNVC: 2
HE60M1: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-485-5314
Bumper

144855314
15145460: RNCC: 3 | RNVC: 2

29 Jan 1997

5340-14-406-0857
Bumper

144060857
905120200: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-541-5430
Angle Bracket

145415430
2092164: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-451-9505
Bumper

144519505
9104021251: RNCC: 3 | RNVC: 9
1051122E00: RNCC: 5 | RNVC: 2

13 Dec 1991

5340-14-461-9560
Butt Hinge

144619560
T700A5285006000: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-480-2396
Mounting Bracket

144802396
10245818: RNCC: 3 | RNVC: 2

28 Feb 1996

5340-14-387-1788
Bumper

143871788
1935-520: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-518-2015
Runner

145182015
434428: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-546-1791
Angle Bracket

145461791
RA1B701386313: RNCC: 3 | RNVC: 2

15 Jun 2005

5340-14-501-5984
Mounting Bracket

145015984
45595020: RNCC: 3 | RNVC: 2
45595020: RNCC: 5 | RNVC: 9
F300 0T 025 0246: RNCC: 6 | RNVC: 9

5 Nov 1997

5340-14-268-1481
Mending Plate

142681481
78667: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-363-7395
Angle Bracket

143637395
A11A211178060: RNCC: 3 | RNVC: 2

6 Jul 1980

5340-14-461-9947
Buckle

144619947
IF006055: RNCC: 3 | RNVC: 9
RAR0801: RNCC: 5 | RNVC: 2
035087W: RNCC: 5 | RNVC: 2

31 Mar 1993

5340-14-471-5282
Bow Handle

144715282
5260003A: RNCC: 3 | RNVC: 2

31 Aug 1994

5340-14-040-9117
Mending Plate

140409117
16129667: RNCC: 3 | RNVC: 2
16129667: RNCC: 5 | RNVC: 2
16129667: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-454-6647
Blank Panel

144546647
TH20K968: RNCC: 3 | RNVC: 2

9 Apr 1992

5340-14-523-4995
Mounting Plate

145234995
01-702-363: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-14-399-9478
Mounting Plate

143999478
8727107-001: RNCC: 3 | RNVC: 2
8727107001: RNCC: 5 | RNVC: 2

24 Apr 1985

5340-14-383-2053
Angle Bracket

143832053
A10-11-122-00-0M2: RNCC: 3 | RNVC: 2
A10-11-122-00-0M2: RNCC: 5 | RNVC: 2
A10-11-122-00-0M2: RNCC: 5 | RNVC: 2
85-692-0005: RNCC: 6 | RNVC: 9

17 Mar 1983

5340-14-502-5096
Webbing Strap

145025096
5000541018: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-296-2971
Rod End Clevis

142962971
A1-63385: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-467-0442
Rod End Clevis

144670442
TB30-74118-101: RNCC: 3 | RNVC: 2

16 Dec 1993

5340-14-311-6699
Pipe Hanger

143116699
3160S78-04-969: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-540-1623
Access Cover

145401623
M.N5020008: RNCC: 3 | RNVC: 2

11 Mar 2004

5340-14-339-3119
Retaining Strap

143393119
A108-2: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-490-3161
Access Cover

144903161
Z00045-00-0000P005: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-488-5184
Mounting Bracket

144885184
935504-03: RNCC: 3 | RNVC: 2

14 May 1997

5340-14-267-3380
Handle Grip

142673380
262-10-23041-15: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-447-3070
Mending Plate

144473070
20184447: RNCC: 1 | RNVC: 2
1034685C00: RNCC: 3 | RNVC: 2
A01074-08-0000P023: RNCC: 3 | RNVC: 2
20184447: RNCC: 5 | RNVC: 9

15 May 1991

5340-14-504-1264
Block Clamp

145041264
FD1B700-311: RNCC: 3 | RNVC: 2

9 Feb 1998

5340-14-479-6081
Access Cover

144796081
23626711-0: RNCC: 3 | RNVC: 2

24 Jan 1996

5340-14-479-2663
Access Cover

144792663
23628322-6: RNCC: 3 | RNVC: 2

3 Jan 1996

5340-14-411-3249
Retaining Strap

144113249
CR1804-1: RNCC: 3 | RNVC: 9

6 Aug 1986

5340-14-542-0257
Loop Clamp

145420257
20051-088: RNCC: 3 | RNVC: 2
502101010110A: RNCC: 3 | RNVC: 9
2 0051-088: RNCC: 5 | RNVC: 2

2 Jul 2004

5340-14-287-9206
Mending Plate

142879206
341A31-4158-20: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-447-1209
Angle Bracket

144471209
21312404-01: RNCC: 3 | RNVC: 2
21312579-1: RNCC: 5 | RNVC: 2

3 May 1991

5340-14-440-6777
Mounting Bracket

144406777
332A84-1013-25: RNCC: 3 | RNVC: 2

18 Jul 1990

5340-14-527-6014
Utility Access Door

145276014
CLB821-711-500: RNCC: 3 | RNVC: 2

30 Oct 2001

5340-14-201-9154
Threaded Rod End

142019154
501-700-604-0: RNCC: 3 | RNVC: 2

1 Jan 1962

5340-14-362-4383
Loop Clamp

143624383
NO PRIMARY REF14-362-4383: RNCC: 3 | RNVC: 2
104975-01: RNCC: 5 | RNVC: 9

19 Mar 1980

5340-14-429-8905
Permanent Magnet

144298905
V5: RNCC: 3 | RNVC: 2
55-53: RNCC: 5 | RNVC: 2

15 Feb 1989

5340-14-531-9768
Access Cover

145319768
3345014: RNCC: 3 | RNVC: 2
3345014: RNCC: 5 | RNVC: 2

2 Oct 2002

5340-14-460-8363
Bumper

144608363
ST442M15P104: RNCC: 3 | RNVC: 2
1211314P004: RNCC: 5 | RNVC: 2

10 Feb 1993

5340-14-322-4350
Angle Bracket

143224350
436724: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-518-4653
Mounting Bracket

145184653
T716A2001114: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-208-1927
Retaining Clip

142081927
34232: RNCC: 3 | RNVC: 2
34232: RNCC: 3 | RNVC: 9
300900059: RNCC: 5 | RNVC: 9
36132: RNCC: 5 | RNVC: 9
R300800127: RNCC: 5 | RNVC: 9
R300900059: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-513-8053
Angle Bracket

145138053
DE21793: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-469-8473
Webbing Strap

144698473
01815-SR1 5ML: RNCC: 3 | RNVC: 2

11 May 1994

5340-14-424-2849
Mounting Bracket

144242849
0185100570: RNCC: 3 | RNVC: 2
89414557: RNCC: 5 | RNVC: 2

19 May 1988

5340-14-474-8789
Mounting Bracket

144748789
568086: RNCC: 3 | RNVC: 2

8 Mar 1995

5340-14-420-0392
Clamp Bolt Assembly

144200392
44617: RNCC: 3 | RNVC: 2

18 Nov 1987

5340-14-358-5724
Handle Grip

143585724
71382: RNCC: 3 | RNVC: 2
530040: RNCC: 5 | RNVC: 2

7 Sep 1979

5340-14-344-2441
Leaf Spring

143442441
0038722708: RNCC: 3 | RNVC: 2
0038722708: RNCC: 5 | RNVC: 9

10 Aug 1977

5340-14-453-4266
Clamping Catch

144534266
431842: RNCC: 3 | RNVC: 2
431842: RNCC: 5 | RNVC: 9

19 Feb 1992

5340-14-267-8097
Expansion Shield

142678097
PF16: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-474-2148
Mounting Bracket

144742148
0322800020: RNCC: 3 | RNVC: 2

1 Feb 1995

5340-14-536-1263
Mounting Plate

145361263
1377717: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-384-7821
Angle Bracket

143847821
20070222: RNCC: 3 | RNVC: 2
20070222: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-545-3308
Mounting Bracket

145453308
1027603K01: RNCC: 3 | RNVC: 2

5 Apr 2005

5340-14-350-1153
Handle Grip

143501153
U272: RNCC: 3 | RNVC: 2
91336762: RNCC: 5 | RNVC: 2
U272: RNCC: 5 | RNVC: 9

14 Jun 1978

5340-14-541-8544
Angle Bracket

145418544
10500936: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-529-4674
Pipe Hanger

145294674
RPL711200193: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-534-8525
Mounting Bracket

145348525
10619631: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-14-042-8119
Loop Clamp

140428119
F105253D: RNCC: 3 | RNVC: 2
89254585: RNCC: 5 | RNVC: 2
F105253D: RNCC: 6 | RNVC: 9

11 Dec 1980

5340-14-348-6762
Webbing Strap

143486762
225498REP2: RNCC: 3 | RNVC: 2
225498REP2: RNCC: 5 | RNVC: 9

19 Apr 1978

5340-14-506-0481
Cover Strip

145060481
DZ1E316114337: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-14-439-3304
Angle Bracket

144393304
DA2C632030841: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-032-1073
Pipe Hanger

140321073
A11A722302011: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-543-5675
Caster Frame

145435675
U14035: RNCC: 3 | RNVC: 9

23 Nov 2004

5340-14-543-5622
Mounting Bracket

145435622
212379: RNCC: 3 | RNVC: 2

23 Nov 2004

5340-14-543-3096
Mounting Bracket

145433096
9105210P005: RNCC: 3 | RNVC: 2

19 Oct 2004

5340-14-463-3700
Mounting Bracket

144633700
16380352: RNCC: 3 | RNVC: 2
16380352: RNCC: 5 | RNVC: 9

9 Jun 1993

5340-14-539-7519
Cover Strip

145397519
SZ09.251.039: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-14-288-4090
Mounting Bracket

142884090
0249967220: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-360-1869
Block Clamp

143601869
A11A704122010: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-14-547-7750
Mounting Bracket

145477750
5010604905: RNCC: 3 | RNVC: 2

12 Nov 2005

5340-14-326-3970
Angle Bracket

143263970
37803: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-556-6197
Utility Guard Rail Section

145566197
RAMBA13113X00: RNCC: 3 | RNVC: 2

28 Mar 2008

5340-14-289-7782
Runner

142897782
16178020: RNCC: 3 | RNVC: 2
16178020: RNCC: 5 | RNVC: 2
16178020: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-517-0269
Bridge Clamp

145170269
A11A272210111A1: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-463-8580
Mounting Plate

144638580
284202: RNCC: 3 | RNVC: 2

30 Jun 1993

5340-14-533-8395
Butt Hinge

145338395
56293789: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-490-1761
Mounting Plate

144901761
5302357.02 46.01 REP C: RNCC: 3 | RNVC: 2
5302357-02 46-01-REP C: RNCC: 5 | RNVC: 2
5302357-02 46-01REPC: RNCC: 5 | RNVC: 2
F300 0T 024 2491: RNCC: 6 | RNVC: 9

17 Sep 1997

5340-14-448-5867
Retaining Clip

144485867
1512-00: RNCC: 3 | RNVC: 2
1512: RNCC: 5 | RNVC: 9

2 Jul 1991

5340-14-303-4802
Loop Clamp

143034802
501-779-774-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-231-7872
Turnbuckle Body

142317872
649-91-13: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-312-8888
Angle Bracket

143128888
160-79161-14A: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-479-5546
Arched Cushion

144795546
MAT169-0027F19DE25: RNCC: 3 | RNVC: 2

22 Jan 1996

5340-14-286-8222
Butt Hinge

142868222
E4M164-008: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-368-1251
Loop Clamp

143681251
279-10-600-01: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-413-3078
Loop Clamp

144133078
90465-13M11: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-14-531-8574
Bumper

145318574
19A2201-10: RNCC: 3 | RNVC: 2

23 Sep 2002

5340-14-355-1217
Loop Clamp

143551217
000076679: RNCC: 3 | RNVC: 9
76679: RNCC: 5 | RNVC: 9

19 Mar 1979

5340-14-554-1143
Loop Clamp

145541143
352 1216: RNCC: 3 | RNVC: 2
352 1216: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-381-6241
Mending Plate

143816241
442406B: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-361-1600
Bumper

143611600
164586: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-482-1093
Angle Bracket

144821093
38509713: RNCC: 3 | RNVC: 2
38509713: RNCC: 5 | RNVC: 9

20 Jun 1996

5340-14-364-6156
Anchor Strap

143646156
5000496530: RNCC: 3 | RNVC: 2
5000496530: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-461-0694
Access Cover

144610694
67726-2: RNCC: 3 | RNVC: 2

22 Feb 1993

5340-14-315-8450
Retaining Strap

143158450
487765: RNCC: 3 | RNVC: 2
20487765-7: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-468-3837
Mounting Bracket

144683837
CV124-1-4: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-14-235-4522
Mending Plate

142354522
104410-1: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-479-5245
Runner

144795245
2-25699: RNCC: 3 | RNVC: 2

17 Jan 1996

5340-14-266-0929
Access Hole Frame

142660929
40320-4: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-304-9990
Plug Button

143049990
G413-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-448-8416
Rod End Clevis

144488416
4-013297: RNCC: 3 | RNVC: 2
4169-4300: RNCC: 5 | RNVC: 2

18 Jul 1991

5340-14-289-8606
Retaining Strap

142898606
M3R221-18-12: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-377-9381
Control Rod

143779381
710040-21061: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-284-7408
Angle Bracket

142847408
121A21-210-31-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-339-4991
Pipe Hanger

143394991
M3R702-65: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-534-0976
Bumper

145340976
332A22-1376-09: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-472-4952
Mounting Bracket

144724952
27108056-6: RNCC: 3 | RNVC: 2

26 Oct 1994

5340-14-549-6612
Mounting Bracket

145496612
2237781640: RNCC: 3 | RNVC: 2

26 Apr 2006

5340-14-479-6073
Runner

144796073
23626189-5: RNCC: 3 | RNVC: 2

24 Jan 1996

5340-14-408-5078
Access Cover

144085078
205681: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-516-3607
Access Cover

145163607
CV11803: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-14-410-2542
Access Cover

144102542
0308120780: RNCC: 3 | RNVC: 2
89404316: RNCC: 5 | RNVC: 2

18 Jun 1986

5340-14-509-1239
Access Cover

145091239
DC70F: RNCC: 3 | RNVC: 2
ND1752: RNCC: 5 | RNVC: 9

21 Oct 1998

5340-14-357-9023
Rod End Clevis

143579023
0033863022: RNCC: 3 | RNVC: 2
0033863022: RNCC: 5 | RNVC: 9

20 Jul 1979

5340-14-410-6453
Anchor Strap

144106453
BGE401123: RNCC: 3 | RNVC: 2
401123: RNCC: 5 | RNVC: 2

9 Jul 1986

5340-14-336-7271
Access Cover

143367271
191089: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-528-5549
Access Cover

145285549
373136: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-541-5248
Mounting Bracket

145415248
1091557: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-533-0904
Mounting Bracket

145330904
5010559238: RNCC: 3 | RNVC: 2

23 Jan 2003

5340-14-541-2314
Mounting Bracket

145412314
10667950000: RNCC: 3 | RNVC: 2

19 May 2004

5340-14-335-0357
Bow Handle

143350357
935323: RNCC: 3 | RNVC: 2

8 Feb 2001

5340-14-545-8569
Retaining Strap

145458569
732374: RNCC: 3 | RNVC: 2

21 May 2005

5340-14-462-2238
Mounting Bracket

144622238
T700A2120095000: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-14-513-8592
Rod End Clevis

145138592
642748: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-311-3632
Angle Bracket

143113632
189007: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-509-1176
Mounting Plate

145091176
NC0590071: RNCC: 3 | RNVC: 2
00131527: RNCC: 5 | RNVC: 9

21 Oct 1998

5340-14-423-2814
Plug Button

144232814
0308760390: RNCC: 3 | RNVC: 2
89404411: RNCC: 5 | RNVC: 2

14 Apr 1988

5340-14-488-1282
Access Cover

144881282
10270800: RNCC: 3 | RNVC: 2

18 Apr 1997

5340-14-502-0398
Access Cover

145020398
103089001601: RNCC: 3 | RNVC: 2
103089001601: RNCC: 5 | RNVC: 2

26 Nov 1997

5340-14-245-1555
Anchor Strap

142451555
70483504: RNCC: 3 | RNVC: 2
70483504: RNCC: 5 | RNVC: 9
483504: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-481-0470
Angle Bracket

144810470
5010112547: RNCC: 3 | RNVC: 2

18 Apr 1996

5340-14-345-8217
Access Cover

143458217
ST406M29P16: RNCC: 3 | RNVC: 2

5 Nov 1977

5340-14-420-4607
Anchor Strap

144204607
06144177: RNCC: 3 | RNVC: 2

10 Dec 1987

5340-14-450-8873
Angle Bracket

144508873
PM1A312800026: RNCC: 3 | RNVC: 2
PM1A312800026: RNCC: 5 | RNVC: 2

23 Oct 1991

5340-14-516-4034
Access Cover

145164034
201RS637V1: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-14-541-1379
Retaining Strap

145411379
36568143: RNCC: 3 | RNVC: 2
36568143: RNCC: 3 | RNVC: 2

14 May 2004

5340-14-527-4276
Access Cover

145274276
V107015: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-525-1931
Access Cover

145251931
06310P122286: RNCC: 3 | RNVC: 2
2425550030: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-407-6771
Mounting Plate

144076771
49702480: RNCC: 3 | RNVC: 2
134150449: RNCC: 5 | RNVC: 2

27 Feb 1986

5340-14-532-8153
Lock Bolt

145328153
FAA331C1: RNCC: 3 | RNVC: 2

17 Dec 2002

5340-14-312-8277
Mounting Bracket

143128277
0249851920: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-406-0754
Angle Bracket

144060754
003063080P: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-300-3409
Retaining Strap

143003409
15145219: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-443-0571
Cover Strip

144430571
PM1A227000024: RNCC: 3 | RNVC: 2
PM1A227000024: RNCC: 5 | RNVC: 2

7 Nov 1990

5340-14-479-3600
Mounting Plate

144793600
23626568-2: RNCC: 3 | RNVC: 2

10 Jan 1996

5340-14-480-9995
Mounting Plate

144809995
500-0193-001: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-14-249-8411
Loop Clamp

142498411
52236: RNCC: 3 | RNVC: 2
520324: RNCC: 5 | RNVC: 2
528324: RNCC: 5 | RNVC: 2
52236-2E: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-322-7445
Mending Plate

143227445
73101-01-30-02BREP12: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-362-9924
Bumper

143629924
100SP42-0011: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-14-469-6841
Pipe Hanger

144696841
78733-020-038: RNCC: 3 | RNVC: 2

4 May 1994

5340-14-496-9174
Angle Bracket

144969174
490127-35000-10: RNCC: 3 | RNVC: 2
F300 0T 022 2671: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-318-5488
Rod End Clevis

143185488
NO PRIMARY REF14-318-5488: RNCC: 3 | RNVC: 2
71448079REPU14: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-423-7630
Access Cover

144237630
NO PRIMARY REF14-423-7630: RNCC: 3 | RNVC: 2
S0F14A3: RNCC: 5 | RNVC: 9
F300 0T 005 9308: RNCC: 6 | RNVC: 9

28 Apr 1988

5340-14-554-1710
Mounting Plate

145541710
CLB501-610-441: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-522-4691
Bumper

145224691
C0RF1-210-32-02: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-14-542-4125
Rim Latch

145424125
5302835-ENDP29-01: RNCC: 3 | RNVC: 2
5302835ENDP29-01: RNCC: 5 | RNVC: 2

9 Jul 2004

5340-14-530-9533
Angle Bracket

145309533
341A23-1020-39: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-14-412-1461
Case Corner

144121461
P3C005405-00: RNCC: 3 | RNVC: 9

8 Oct 1986

5340-14-545-9772
Kick Door Plate

145459772
332A08-0865-31: RNCC: 3 | RNVC: 2

1 Jun 2005

5340-14-453-4219
Synchro Clamp

144534219
NO PRIMARY REF14-453-4219: RNCC: 3 | RNVC: 2
432005: RNCC: 5 | RNVC: 2

19 Feb 1992

5340-14-519-6293
Loop Clamp

145196293
CFCD1-15-38: RNCC: 3 | RNVC: 2
RSGU1-38-15-W1: RNCC: 5 | RNVC: 9
RSGU1-38-15W1: RNCC: 5 | RNVC: 9

27 Mar 2000

5340-14-500-4052
Shelf Bracket

145004052
X5828-007: RNCC: 3 | RNVC: 2
F300 0T 024 4153: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-496-9378
Mounting Bracket

144969378
117E191-00: RNCC: 3 | RNVC: 2
117E191-00: RNCC: 5 | RNVC: 9
F300 0T 022 2925: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-533-8886
Clamping Catch

145338886
09-212-00: RNCC: 3 | RNVC: 2
09.212.00: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-482-9199
Pipe Hanger

144829199
78731-082-050: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-201-5978
Retaining Strap

142015978
502-551-519-0: RNCC: 3 | RNVC: 2

1 Jan 1962

5340-14-375-2550
Detent Plunger

143752550
10-201-157: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-527-1045
Mounting Bracket

145271045
21227161-00: RNCC: 3 | RNVC: 2
21227161-4: RNCC: 5 | RNVC: 2

3 Oct 2001

5340-14-461-0326
Anchor Strap

144610326
RU970-0042M12P19: RNCC: 3 | RNVC: 2
RU967-421M12P19: RNCC: 5 | RNVC: 2

17 Feb 1993

5340-14-449-1612
Control Rod

144491612
M085-202-102A: RNCC: 3 | RNVC: 2

31 Jul 1991

5340-14-389-4429
Mounting Plate

143894429
365A32-6521-20: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-404-0362
Angle Bracket

144040362
366A00-0023-05: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-280-5610
Mounting Plate

142805610
NO PRIMARY REF14-280-5610: RNCC: 3 | RNVC: 2
41997: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-436-9524
Lock-Release Lever

144369524
21308645-01: RNCC: 3 | RNVC: 2

10 Jan 1990

5340-14-473-2636
Swivel Caster

144732636
TP3BR100-23L: RNCC: 3 | RNVC: 2
0218951S00: RNCC: 5 | RNVC: 2

12 Dec 1994

5340-14-473-8310
Mounting Plate

144738310
332A58-1801-35: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-556-2655
Utility Resilient Mount

145562655
F5-13-80-30: RNCC: 3 | RNVC: 2

18 Feb 2008

5340-14-457-6769
Pipe Hanger

144576769
402235A-SG10137-Z2CND17-12: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-331-8453
Control Rod

143318453
3511 130 66301: RNCC: 3 | RNVC: 2
3511-130-66301: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-349-9200
Support Hook

143499200
6511-07012: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-405-3210
Support Hook

144053210
21212-001: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-326-3709
Mending Plate

143263709
N06228-29: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-383-9604
Loop Clamp

143839604
NO PRIMARY REF14-383-9604: RNCC: 3 | RNVC: 2
Z14601: RNCC: 5 | RNVC: 9

4 May 1983

5340-14-355-9234
Tubular Fairlead

143559234
45451-367-690: RNCC: 3 | RNVC: 2
45451-367-690: RNCC: 5 | RNVC: 2

5 Apr 1979

5340-14-302-4073
Retaining Strap

143024073
NO PRIMARY REF14-302-4073: RNCC: 3 | RNVC: 2
64396: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-472-8651
Angle Bracket

144728651
332A21-1030-80: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-309-7492
Snap Hook

143097492
4030T30-202: RNCC: 3 | RNVC: 2
4030-30AT26: RNCC: 5 | RNVC: 9
4030-30AT28: RNCC: 5 | RNVC: 9
4030T30-210: RNCC: 5 | RNVC: 9
4030T30-28: RNCC: 5 | RNVC: 9
4030T30-210: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-511-8648
Access Cover

145118648
330CEL143-081: RNCC: 3 | RNVC: 2
330CEL143-81: RNCC: 3 | RNVC: 2

27 Jan 1999

5340-14-470-5122
Bow Handle

144705122
10501-010: RNCC: 3 | RNVC: 2
77092216: RNCC: 5 | RNVC: 2
91394632: RNCC: 5 | RNVC: 9

22 Jun 1994

5340-14-376-0194
Plug Button

143760194
366A21-1171-20: RNCC: 3 | RNVC: 2

30 Mar 1982

5340-14-572-1742
Utility Access Door

145721742
332A21-4197-01: RNCC: 3 | RNVC: 2
332A21419701: RNCC: 5 | RNVC: 2

13 Jun 2012

5340-14-406-3767
Detent Plunger

144063767
N262-1405-52118-10: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-010-1223
Loop Clamp

140101223
51100005024: RNCC: 3 | RNVC: 2
A0021-15N24: RNCC: 5 | RNVC: 2
15N24: RNCC: 5 | RNVC: 2
A0021-15N24: RNCC: 5 | RNVC: 2

1 Jan 1961

5340-14-433-1144
Block Clamp

144331144
163313-24: RNCC: 3 | RNVC: 9
0521129: RNCC: 5 | RNVC: 2
163313-20: RNCC: 5 | RNVC: 9

11 Jul 1989

5340-14-373-8209
Rim Lock Set

143738209
NO PRIMARY REF14-373-8209: RNCC: 3 | RNVC: 2
6600-04MNFH004: RNCC: 5 | RNVC: 9

13 Nov 1981

5340-14-574-3185
Utility Resilient Mount

145743185
HH13-40TM2: RNCC: 3 | RNVC: 2

8 Jan 2013

5340-14-349-7366
Rod End Clevis

143497366
41237: RNCC: 3 | RNVC: 2
WG0045-0409-101: RNCC: 5 | RNVC: 2

22 May 1978

5340-14-521-5566
Loop Clamp

145215566
424829-26: RNCC: 3 | RNVC: 2
9560159740: RNCC: 5 | RNVC: 2

21 Aug 2000

5340-14-291-1405
Bumper

142911405
NO PRIMARY REF14-291-1405: RNCC: 3 | RNVC: 2
92269: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-521-3471
Protection Bellows

145213471
452-13394-000-20: RNCC: 3 | RNVC: 2

20 Jul 2000

5340-14-439-8388
Detent Plunger

144398388
332A58-0023-0082: RNCC: 3 | RNVC: 2

23 May 1990

5340-14-527-9648
Retaining Band

145279648
4E6-10655-000: RNCC: 3 | RNVC: 2
4E6-10655-000: RNCC: 5 | RNVC: 2

5 Dec 2001

5340-14-206-9167
Loop Clamp

142069167
51113105021: RNCC: 3 | RNVC: 2
25G21: RNCC: 5 | RNVC: 2
A0021-25G21: RNCC: 5 | RNVC: 2
18576633-2: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-408-4171
Loop Clamp

144084171
80-300762: RNCC: 3 | RNVC: 2

24 Mar 1986

5340-14-533-6113
Mounting Bracket

145336113
459-11550-000: RNCC: 3 | RNVC: 2

12 Feb 2003

5340-14-501-9554
Mounting Plate

145019554
332A08-4684-31: RNCC: 3 | RNVC: 2

19 Nov 1997

5340-14-449-1630
Mounting Plate

144491630
M085-204-203A: RNCC: 3 | RNVC: 2

31 Jul 1991

5340-14-502-6499
Bow Handle

145026499
236-50101-08: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-568-7765
Utility Resilient Mount

145687765
E1N-4001-53: RNCC: 3 | RNVC: 2

5 Jul 2011

5340-14-410-6887
Retaining Strap

144106887
249281: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-483-0634
Mounting Bracket

144830634
10441591: RNCC: 3 | RNVC: 2

8 Aug 1996

5340-14-508-3793
Bumper

145083793
2GM5069: RNCC: 3 | RNVC: 2
2GM5069: RNCC: 5 | RNVC: 9

9 Sep 1998

5340-14-547-8333
Runner

145478333
V001071: RNCC: 3 | RNVC: 2

17 Nov 2005

5340-14-519-3458
Mounting Plate

145193458
C321A1006201: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-508-9707
Mounting Bracket

145089707
7700742329: RNCC: 3 | RNVC: 2

12 Oct 1998

5340-14-512-5747
Angle Bracket

145125747
3BM01919AAAA: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-520-0206
Rim Latch

145200206
10577772: RNCC: 3 | RNVC: 2

3 May 2000

5340-14-041-3313
Loop Clamp

140413313
16245708: RNCC: 3 | RNVC: 2
16245708: RNCC: 5 | RNVC: 2
16245708: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-327-8598
Loop Clamp

143278598
880-16-0-166-0: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-288-5710
Retaining Clip

142885710
NO PRIMARY REF14-288-5710: RNCC: 3 | RNVC: 2
1584-4: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-448-9669
Flush Catch Claw

144489669
BAZ92427: RNCC: 3 | RNVC: 2
30-0895: RNCC: 5 | RNVC: 2

24 Jul 1991

5340-14-287-0150
Access Cover

142870150
2-11527: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-361-8309
Anchor Strap

143618309
121A71-400-79-2: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-519-3106
Mounting Bracket

145193106
332V21-1029-22: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-459-7960
Loop Clamp

144597960
FCC-2: RNCC: 3 | RNVC: 2

17 Dec 1992

5340-14-437-4586
Lock-Release Lever

144374586
332A91-0027-11: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-476-0889
Angle Bracket

144760889
222-3018-164: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-430-9475
Pipe Hanger

144309475
G230075-15: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-14-421-5986
Rigid Caster

144215986
7816000: RNCC: 3 | RNVC: 2
89410487: RNCC: 5 | RNVC: 2
7816000: RNCC: 5 | RNVC: 9

20 Jan 1988

5340-14-383-6022
Rod End Clevis

143836022
TB30-37025-000: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-375-9746
Retaining Strap

143759746
NO PRIMARY REF14-375-9746: RNCC: 3 | RNVC: 2
450022032: RNCC: 5 | RNVC: 2
450022032: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-390-3177
Rigid Caster

143903177
789-048: RNCC: 3 | RNVC: 2
789-048: RNCC: 5 | RNVC: 9
85-692-5207: RNCC: 6 | RNVC: 9

26 Jan 1984

5340-14-366-9437
Loop Clamp

143669437
069-01-310: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-398-6414
Webbing Strap

143986414
E30-2M: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-543-4843
Access Cover

145434843
F1414848: RNCC: 3 | RNVC: 2

9 Nov 2004

5340-14-528-1945
Access Cover

145281945
8021542L00: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-14-302-3277
Access Cover

143023277
156994: RNCC: 3 | RNVC: 2
156994: RNCC: 5 | RNVC: 2
156994: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-402-8168
Rod End Clevis

144028168
DLT047109: RNCC: 3 | RNVC: 2

19 Jul 1985

5340-14-396-3578
Plug Button

143963578
5000045750: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-530-3231
Access Cover

145303231
39066182: RNCC: 3 | RNVC: 2

29 May 2002

5340-14-362-4222
Access Cover

143624222
458776: RNCC: 3 | RNVC: 2

19 Mar 1980

5340-14-284-4491
Angle Bracket

142844491
6111-1605: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-345-2745
Loop Clamp

143452745
FF1B701-59: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-547-9949
Mounting Plate

145479949
JB1G: RNCC: 3 | RNVC: 2
086191C: RNCC: 5 | RNVC: 2

2 Dec 2005

5340-14-457-6140
Retaining Strap

144576140
PM1A689304301: RNCC: 3 | RNVC: 2
PM1A689304301: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-332-1598
Lock-Release Lever

143321598
BAZ2221: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-547-5625
Angle Bracket

145475625
RA1M704756221A1: RNCC: 3 | RNVC: 2

16 Oct 2005

5340-14-551-9155
Mounting Bracket

145519155
N3254000A: RNCC: 3 | RNVC: 2

8 Nov 2006

5340-14-542-0498
Loop Clamp

145420498
21664127-621: RNCC: 3 | RNVC: 2
502105008015A: RNCC: 3 | RNVC: 9
2166 4127-621: RNCC: 5 | RNVC: 2

2 Jul 2004

5340-14-459-4688
Bow Handle

144594688
769000000: RNCC: 3 | RNVC: 2

8 Dec 1992

5340-14-548-6745
Mounting Bracket

145486745
10534493: RNCC: 3 | RNVC: 2

30 Jan 2006

5340-14-541-9974
Access Cover

145419974
20036-901: RNCC: 3 | RNVC: 2
502106017002A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-512-5380
Rod End Clevis

145125380
F175-22-01RS1: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-471-0480
Plug Button

144710480
341A69-6623-24: RNCC: 3 | RNVC: 2

20 Jul 1994

5340-14-432-1497
Bow Handle

144321497
NO PRIMARY REF14-432-1497: RNCC: 3 | RNVC: 2
3511-314-98611: RNCC: 5 | RNVC: 9

24 May 1989

5340-14-550-4972
Access Cover

145504972
78740A40-32-70: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-487-5578
Mounting Plate

144875578
78786-050B13F: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-457-6780
Rod End Clevis

144576780
A03037-10-2010P095: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-331-7401
Angle Bracket

143317401
330A22-2022-43: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-441-8922
Lock-Release Lever

144418922
17678-001: RNCC: 3 | RNVC: 2

24 Sep 1990

5340-14-342-7918
Retaining Strap

143427918
S274399E: RNCC: 3 | RNVC: 2
85-668-3540: RNCC: 6 | RNVC: 9

16 May 1977

5340-14-268-8193
Rod End Clevis

142688193
STI1-156267: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-250-3517
Access Cover

142503517
5170782900: RNCC: 3 | RNVC: 2
707829: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-359-7304
Anchor Strap

143597304
BAZ2678: RNCC: 3 | RNVC: 2

15 Oct 1979

5340-14-434-7475
Rod End Clevis

144347475
553302: RNCC: 3 | RNVC: 2

3 Oct 1989

5340-14-514-2176
Access Cover

145142176
F1359745: RNCC: 3 | RNVC: 2

28 Apr 1999

5340-14-533-9179
Access Cover

145339179
91337378: RNCC: 3 | RNVC: 2

3 Mar 2003

5340-14-412-1770
Locking Stay

144121770
176-250: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-519-9238
Utility Access Door

145199238
61583: RNCC: 3 | RNVC: 2

19 Apr 2000

5340-14-549-6599
Access Cover

145496599
2237777950: RNCC: 3 | RNVC: 2

26 Apr 2006

5340-14-305-2498
Access Cover

143052498
TH20C123: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-528-8648
Access Cover

145288648
T257A5001103: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-14-521-2947
Utility Access Door

145212947
10505530: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-14-525-5988
Access Cover

145255988
10 146 400 1400: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-388-4736
Access Cover

143884736
057473: RNCC: 3 | RNVC: 2

3 Nov 1983

5340-14-518-8700
Rod End Clevis

145188700
C762C1008201: RNCC: 3 | RNVC: 2
C762C1008201: RNCC: 5 | RNVC: 2

23 Feb 2000

5340-14-488-2187
Angle Bracket

144882187
39043659: RNCC: 3 | RNVC: 2
39043659: RNCC: 3 | RNVC: 9

23 Apr 1997

5340-14-031-1711
Anchor Strap

140311711
VDP4919: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-399-9719
Anchor Strap

143999719
234043: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-514-3080
Access Cover

145143080
403V415: RNCC: 3 | RNVC: 2
403V415: RNCC: 5 | RNVC: 2

10 May 1999

5340-14-480-9577
Access Cover

144809577
036309A: RNCC: 3 | RNVC: 2

11 Apr 1996

5340-14-475-0729
Access Cover

144750729
MC1093F00: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-14-502-5739
Access Cover

145025739
5001013993: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-480-8395
Access Cover

144808395
033590M: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-14-385-8330
Access Cover

143858330
095700344: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-484-6949
Access Cover

144846949
602C601: RNCC: 3 | RNVC: 2
602C601: RNCC: 5 | RNVC: 2

3 Dec 1996

5340-14-503-1151
Access Cover

145031151
DA2C707114420N1: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-553-3511
Access Cover

145533511
260566924: RNCC: 3 | RNVC: 2

28 Mar 2007

5340-14-430-0952
Rod End Clevis

144300952
941TER: RNCC: 3 | RNVC: 2
941TER: RNCC: 5 | RNVC: 9

1 Mar 1989

5340-14-541-6248
Utility Access Door

145416248
1091979: RNCC: 3 | RNVC: 2

15 Jun 2004

5340-14-541-6249
Utility Access Door

145416249
1091978: RNCC: 3 | RNVC: 2

15 Jun 2004

5340-14-542-2950
Rod End Clevis

145422950
927091108: RNCC: 3 | RNVC: 2
927091108: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-361-2071
Rod End Clevis

143612071
BAZ97447: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-382-3911
Rod End Clevis

143823911
BAZ97534: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-434-0703
Rod End Clevis

144340703
534758: RNCC: 3 | RNVC: 2

4 Sep 1989

5340-14-446-0166
Rod End Clevis

144460166
3450014MI: RNCC: 3 | RNVC: 2
F300 0T 009 7759: RNCC: 6 | RNVC: 9

4 Mar 1991

5340-14-438-4392
Access Cover

144384392
20252652: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-524-8166
Plug Button

145248166
8007301X00: RNCC: 3 | RNVC: 2

18 Apr 2001

5340-14-508-7900
Mounting Bracket

145087900
PE 12706: RNCC: 3 | RNVC: 2
PE12706: RNCC: 5 | RNVC: 9

30 Sep 1998

5340-14-230-5554
Retaining Strap

142305554
0202120330: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-501-1129
Access Cover

145011129
2605028: RNCC: 3 | RNVC: 2
F300 0T 025 1525: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-390-5868
Access Cover

143905868
13-5730BRIDESU1194-REP14: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-343-6627
Access Cover

143436627
15153697: RNCC: 3 | RNVC: 2

13 Jul 1977

5340-14-254-9032
Access Cover

142549032
202454: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-505-5739
Buckle

145055739
SP25: RNCC: 3 | RNVC: 2
SP25: RNCC: 5 | RNVC: 2
CAE01415: RNCC: 5 | RNVC: 2

26 Mar 1998

5340-14-343-1419
Anchor Strap

143431419
154395: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-14-549-9731
Access Cover

145499731
F1262320: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-385-2472
Access Cover

143852472
25900: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-386-0211
Doorknob

143860211
N494: RNCC: 3 | RNVC: 9

24 Aug 1983

5340-14-459-6390
Mounting Bracket

144596390
29188480: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-14-406-6794
Rod End Clevis

144066794
421MA0197F5: RNCC: 3 | RNVC: 2
421MA197F5: RNCC: 5 | RNVC: 2

8 Jan 1986

5340-14-349-9705
Mending Plate

143499705
TH20K23: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-520-2784
Access Cover

145202784
8743994: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-480-8210
Runner

144808210
MP1443F00: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-14-288-3985
Access Cover

142883985
0157080080: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-545-6861
Mounting Bracket

145456861
RA1M703752121: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-415-4089
Angle Bracket

144154089
303028: RNCC: 3 | RNVC: 2

11 May 1987

5340-14-439-1963
Mounting Bracket

144391963
16008421: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-412-4199
Butt Hinge

144124199
CL418ABR: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-14-512-5727
Mounting Bracket

145125727
38730540: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-524-0395
Mounting Bracket

145240395
PONTE01815X00: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-14-520-0179
Mounting Bracket

145200179
10597376: RNCC: 3 | RNVC: 2

3 May 2000

5340-14-465-6495
Plug Button

144656495
851-500-289-0: RNCC: 3 | RNVC: 2

6 Oct 1993

5340-14-282-6184
Rod End Clevis

142826184
121E26-767-02-0: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-403-4756
Door Handle

144034756
NO PRIMARY REF14-403-4756: RNCC: 3 | RNVC: 2
P3H012055-00: RNCC: 5 | RNVC: 9

21 Aug 1985

5340-14-277-7234
Retaining Strap

142777234
M267-11128: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-539-4278
Mounting Plate

145394278
21429045-00: RNCC: 3 | RNVC: 2
21429045-6: RNCC: 5 | RNVC: 2

14 Jan 2004

5340-14-340-3365
Access Cover

143403365
M3C704-66-02: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-512-2203
Mounting Bracket

145122203
4374-0047: RNCC: 3 | RNVC: 2

8 Feb 1999

5340-14-505-5734
Rope Cleat

145055734
NO PRIMARY REF14-505-5734: RNCC: 3 | RNVC: 2
A50082: RNCC: 5 | RNVC: 9

26 Mar 1998

5340-14-367-5678
Mending Plate

143675678
C14228-05: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-495-4237
Mounting Plate

144954237
L44234-39: RNCC: 3 | RNVC: 2
F300 0T 019 2415: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-527-2567
Retaining Strap

145272567
74472: RNCC: 3 | RNVC: 2

17 Oct 2001

5340-14-403-5131
Snap Hook

144035131
4030-25-31: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-244-7066
Retaining Clip

142447066
6G01-060-6: RNCC: 3 | RNVC: 2
6G01-060-6: RNCC: 5 | RNVC: 9
6G01-060-6: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-542-9965
Casement Fastener

145429965
E5-1-045-120: RNCC: 3 | RNVC: 2

18 Aug 2004

5340-14-383-6250
Loop Clamp

143836250
FA1B766-73-01: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-313-8168
Loop Clamp

143138168
L264564: RNCC: 3 | RNVC: 2
L264564: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-332-1518
Mending Plate

143321518
D01228-46: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-312-6412
Rod End Clevis

143126412
341A27-5105-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-534-1184
Corner Brace

145341184
332P61-6811-03: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-515-3773
Mounting Bracket

145153773
A82282-73: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-547-1735
Threaded Rod End

145471735
EA1M241-53-04: RNCC: 3 | RNVC: 2

30 Sep 2005

5340-14-427-8537
Mounting Plate

144278537
D10-33923: RNCC: 3 | RNVC: 2
D10-33923: RNCC: 5 | RNVC: 9

17 Nov 1988

5340-14-481-3710
Mounting Bracket

144813710
360S925-A: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-533-8083
Casement Fastener

145338083
01225CHROME: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-288-3653
Rod End Clevis

142883653
4944011600: RNCC: 3 | RNVC: 2
9440-160: RNCC: 5 | RNVC: 2
85-694-8638: RNCC: 6 | RNVC: 9

1 Jan 1972

5340-14-226-5291
Slide Keeper

142265291
AA4: RNCC: 3 | RNVC: 2
152896: RNCC: 3 | RNVC: 2
1082: RNCC: 5 | RNVC: 2
MP1040: RNCC: 5 | RNVC: 2
1082: RNCC: 5 | RNVC: 9
MP1040: RNCC: 5 | RNVC: 9
85-684-6360: RNCC: 6 | RNVC: 9

1 Jan 1966

5340-14-272-9656
Retaining Strap

142729656
A3-64107: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-494-1144
Access Cover

144941144
401967: RNCC: 3 | RNVC: 2
F300 0T 015 5186: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-490-2992
Mounting Bracket

144902992
J05085-04-0100P011: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-396-3498
Anchor Strap

143963498
0000662553: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-275-2936
Plug Button

142752936
Q3-3U6Z5: RNCC: 3 | RNVC: 2
1149: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-341-1994
Loop Clamp

143411994
M3E707-19: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-465-6430
Access Cover

144656430
79130976: RNCC: 3 | RNVC: 2

6 Oct 1993

5340-14-554-1165
Pipe Hanger

145541165
352 261: RNCC: 3 | RNVC: 2
352 261: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-479-6877
Mounting Bracket

144796877
252262670: RNCC: 3 | RNVC: 2
542337: RNCC: 5 | RNVC: 2
226267: RNCC: 5 | RNVC: 2

31 Jan 1996

5340-14-544-0766
Mortise Lock Set

145440766
AMPC-CEGE161009: RNCC: 3 | RNVC: 2

3 Jan 2005

5340-14-481-3818
T Bracket

144813818
10333311: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-477-7388
Eye Hook

144777388
1068009A00: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-14-442-1733
Retaining Clip

144421733
20294137: RNCC: 3 | RNVC: 2

3 Oct 1990

5340-14-549-3966
Mounting Plate

145493966
21247239-4: RNCC: 3 | RNVC: 2

29 Mar 2006

5340-14-520-0149
Mounting Bracket

145200149
10564665: RNCC: 3 | RNVC: 2

3 May 2000

5340-14-457-8842
Tee Hinge

144578842
02864615D5A: RNCC: 3 | RNVC: 2

24 Sep 1992

5340-14-536-1078
Mounting Bracket

145361078
803237130715: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-396-5373
Mending Plate

143965373
221904: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-527-3676
Access Cover

145273676
D109065: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-495-9098
Rod End Clevis

144959098
F00152399: RNCC: 3 | RNVC: 2
F00152399: RNCC: 5 | RNVC: 9
F300 0T 020 4751: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-553-4323
Mounting Plate

145534323
0319727520: RNCC: 3 | RNVC: 2

4 Apr 2007

5340-14-515-9819
Access Cover

145159819
009822050S: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-14-411-0393
Access Cover

144110393
EA0147: RNCC: 3 | RNVC: 2

5 Aug 1986

5340-14-434-0820
Locking Stay

144340820
0870259C00: RNCC: 3 | RNVC: 2

5 Sep 1989

5340-14-504-7705
Locking Stay

145047705
117765: RNCC: 3 | RNVC: 2
5010148274: RNCC: 3 | RNVC: 2

4 Mar 1998

5340-14-531-0038
Access Cover

145310038
61014962: RNCC: 3 | RNVC: 2

22 Jul 2002

5340-14-464-0036
Access Cover

144640036
38218809: RNCC: 3 | RNVC: 2

7 Jul 1993

5340-14-222-9957
Rod End Clevis

142229957
STD42: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-370-8840
Anchor Strap

143708840
S3819: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-451-7564
Mounting Bracket

144517564
278049-1: RNCC: 3 | RNVC: 2

4 Dec 1991

5340-14-444-8676
Utility Access Door

144448676
39534040: RNCC: 3 | RNVC: 2
39534040: RNCC: 5 | RNVC: 9

23 Jan 1991

5340-14-501-1026
Mounting Bracket

145011026
07209015104: RNCC: 3 | RNVC: 2
F300 0T 025 1414: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-460-3412
Retaining Strap

144603412
321030: RNCC: 3 | RNVC: 2
321030: RNCC: 5 | RNVC: 9

21 Jan 1993

5340-14-324-0951
Handle Grip

143240951
466-9M5P371: RNCC: 3 | RNVC: 2
466-9M5P371: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-507-6888
Mounting Plate

145076888
10085916: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-14-510-0987
Clamping Catch

145100987
1270-53003: RNCC: 3 | RNVC: 2
5340AA8004609: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-452-2433
Mounting Plate

144522433
S7497: RNCC: 3 | RNVC: 9

8 Jan 1992

5340-14-437-9936
Mounting Plate

144379936
1369414: RNCC: 3 | RNVC: 2
KACH414: RNCC: 5 | RNVC: 2

5 Mar 1990

5340-14-518-6383
Loop Clamp

145186383
10352534: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-403-9338
Anchor Strap

144039338
132164: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-540-8249
Access Cover

145408249
X1568283: RNCC: 3 | RNVC: 2

23 Apr 2004

5340-14-488-4785
Access Cover

144884785
45626683: RNCC: 3 | RNVC: 2
45626683: RNCC: 3 | RNVC: 9

14 May 1997

5340-14-461-9545
Rod End Clevis

144619545
T700A5280073100: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-537-1676
Bumper

145371676
5010468022: RNCC: 3 | RNVC: 2

7 Oct 2003

5340-14-363-8604
Anchor Strap

143638604
0000158518: RNCC: 3 | RNVC: 2
0000158518: RNCC: 5 | RNVC: 9
158518: RNCC: 5 | RNVC: 9

7 Aug 1980

5340-14-409-4149
Access Cover

144094149
4771602480: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-511-1938
Rod End Clevis

145111938
D64540: RNCC: 3 | RNVC: 2

9 Dec 1998

5340-14-527-7756
Access Cover

145277756
3511 130 56681: RNCC: 3 | RNVC: 2
3511 130 56681: RNCC: 5 | RNVC: 2

21 Nov 2001

5340-14-502-8141
Runner

145028141
8Y8684: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-031-1695
Anchor Strap

140311695
VDP4739: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-474-4060
Access Cover

144744060
29617390: RNCC: 3 | RNVC: 2

15 Feb 1995

Load More Results