What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 126 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 126 of 446

5340-14-414-2217
Mounting Plate

144142217
16684948: RNCC: 3 | RNVC: 2

26 Jan 1987

5340-14-277-8049
Mending Plate

142778049
A103366: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-349-3062
Retaining Strap

143493062
TH20B2738: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-374-4900
Angle Bracket

143744900
A11A221220071: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-366-5604
Loop Clamp

143665604
160-782031: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-339-3266
Runner

143393266
5000061829: RNCC: 3 | RNVC: 2
5000061829: RNCC: 5 | RNVC: 9

18 Jan 1977

5340-14-528-5355
Mounting Bracket

145285355
45710655: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-348-7034
Bumper

143487034
1060005: RNCC: 3 | RNVC: 2
1060005: RNCC: 5 | RNVC: 2
22349306: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-519-2776
Bow Handle

145192776
P5586071: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-547-9191
Detent Plunger

145479191
8038688W00: RNCC: 3 | RNVC: 2

24 Nov 2005

5340-14-547-4449
Lock Bolt

145474449
5010559784: RNCC: 3 | RNVC: 2

13 Oct 2005

5340-14-548-6353
Mounting Plate

145486353
RA1M701256101: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-457-5661
Case Corner

144575661
69435: RNCC: 3 | RNVC: 2
5045664: RNCC: 5 | RNVC: 9

10 Sep 1992

5340-14-516-6794
Mounting Bracket

145166794
40161093: RNCC: 3 | RNVC: 2

12 Oct 1999

5340-14-499-7627
Mounting Bracket

144997627
703213: RNCC: 3 | RNVC: 2

29 Oct 1997

5340-14-394-9730
Webbing Strap

143949730
96113019: RNCC: 3 | RNVC: 2
96113019: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-380-6577
Bumper

143806577
LS05-001-04: RNCC: 3 | RNVC: 2

29 Nov 1982

5340-14-539-5736
Mounting Bracket

145395736
133030X: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-427-5117
Utility Access Door

144275117
NO PRIMARY REF14-427-5117: RNCC: 3 | RNVC: 2
20552: RNCC: 5 | RNVC: 9

20 Oct 1988

5340-14-448-1845
Loop Clamp

144481845
SP626,9PPRDPAS: RNCC: 3 | RNVC: 2
RAR3483: RNCC: 5 | RNVC: 2
RI SP626-9PPDPAS: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-349-9412
Mending Plate

143499412
P4H005124-00: RNCC: 3 | RNVC: 2
4H005124-00: RNCC: 5 | RNVC: 2
P4H005124-00: RNCC: 5 | RNVC: 9
4H005124-00: RNCC: 5 | RNVC: 9

14 Jun 1978

5340-14-483-5232
Mounting Plate

144835232
1097652D00: RNCC: 3 | RNVC: 2

18 Sep 1996

5340-14-476-5340
Mounting Plate

144765340
CEPK3328000003F101: RNCC: 2 | RNVC: 2

20 Jun 1995

5340-14-299-3333
Pipe Hanger

142993333
MY20516-1702: RNCC: 3 | RNVC: 2
MY20-516-17-02: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-489-9263
Loop Clamp

144899263
650-402-506-0: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-14-306-6871
Access Cover

143066871
439C66513H1DET2: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-544-6345
Loop Clamp

145446345
CFCD1-20-60: RNCC: 3 | RNVC: 2
071339000060020: RNCC: 5 | RNVC: 2

15 Feb 2005

5340-14-527-1862
Mounting Bracket

145271862
10503474: RNCC: 3 | RNVC: 2

10 Oct 2001

5340-14-031-1417
Bumper

140311417
55272: RNCC: 3 | RNVC: 2
VDPM02893: RNCC: 5 | RNVC: 2

14 Jun 1980

5340-14-460-5237
Loop Clamp

144605237
042598X: RNCC: 3 | RNVC: 2
FTKM120A: RNCC: 5 | RNVC: 2

27 Jan 1993

5340-14-524-3137
Bail Handle

145243137
ACA0134: RNCC: 3 | RNVC: 2

13 Mar 2001

5340-14-509-6514
Cover Strip

145096514
RA1M116090051: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-544-2875
Access Cover

145442875
AMPC VDSD E213303A: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-14-506-7011
Mounting Bracket

145067011
10450261: RNCC: 3 | RNVC: 2

11 May 1998

5340-14-502-0463
Rod End Connector

145020463
103090110108: RNCC: 3 | RNVC: 2
103090110108: RNCC: 5 | RNVC: 2

26 Nov 1997

5340-14-382-5849
Corner Brace

143825849
16497260: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-544-9877
Mounting Bracket

145449877
V102003: RNCC: 3 | RNVC: 2

10 Mar 2005

5340-14-041-3915
Loop Clamp

140413915
H14V: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-454-2447
Access Cover

144542447
16379000: RNCC: 3 | RNVC: 2
16379000: RNCC: 5 | RNVC: 9

26 Mar 1992

5340-14-452-0532
Mounting Bracket

144520532
H47114: RNCC: 3 | RNVC: 2

18 Dec 1991

5340-14-363-0639
Angle Bracket

143630639
573905328: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-14-550-8257
Mounting Bracket

145508257
5010559534: RNCC: 3 | RNVC: 2

19 Jul 2006

5340-14-527-2920
Mounting Bracket

145272920
9634145980: RNCC: 3 | RNVC: 9

19 Oct 2001

5340-14-470-3478
Mounting Plate

144703478
9511165002: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-14-402-6827
Rigid Caster

144026827
20RLA082: RNCC: 3 | RNVC: 9
RAS20RLA082: RNCC: 5 | RNVC: 9

19 Jul 1985

5340-14-452-3125
Blank Panel

144523125
75203: RNCC: 3 | RNVC: 2
75203: RNCC: 5 | RNVC: 2

8 Jan 1992

5340-14-434-9098
Bow Handle

144349098
059584H01TRA: RNCC: 3 | RNVC: 2
059584H: RNCC: 5 | RNVC: 2

9 Oct 1989

5340-14-482-4887
Access Cover

144824887
DA2C291114: RNCC: 3 | RNVC: 2

11 Jul 1996

5340-14-422-7936
Mounting Bracket

144227936
20326971: RNCC: 3 | RNVC: 2
20326971: RNCC: 5 | RNVC: 9

17 Mar 1988

5340-14-362-2038
Angle Bracket

143622038
76103: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-459-0701
Strap Hinge

144590701
2CH11PO1: RNCC: 3 | RNVC: 2
2CH11P01: RNCC: 5 | RNVC: 2

18 Nov 1992

5340-14-323-0600
Rod End Clevis

143230600
AJ5109: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-232-2563
Retaining Strap

142322563
33535: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-549-9698
Mounting Bracket

145499698
T327A1001201: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-497-9204
Mounting Bracket

144979204
D10363A: RNCC: 3 | RNVC: 2
RAQ0162: RNCC: 5 | RNVC: 2

24 Oct 1997

5340-14-551-7472
Mounting Plate

145517472
RA1M703556141N1: RNCC: 3 | RNVC: 2

19 Oct 2006

5340-14-551-9809
Mounting Bracket

145519809
238112: RNCC: 3 | RNVC: 2

15 Nov 2006

5340-14-360-2288
Bow Handle

143602288
16296289: RNCC: 3 | RNVC: 2
16296289: RNCC: 5 | RNVC: 9

23 Nov 1979

5340-14-422-6627
Butt Hinge

144226627
543678: RNCC: 3 | RNVC: 2

10 Mar 1988

5340-14-424-4402
Mounting Plate

144244402
79117537: RNCC: 3 | RNVC: 2
79117537: RNCC: 5 | RNVC: 9

19 May 1988

5340-14-403-0291
Mending Plate

144030291
29737095: RNCC: 3 | RNVC: 2
29737095: RNCC: 5 | RNVC: 9

25 Jul 1985

5340-14-398-1896
Mounting Plate

143981896
70850148: RNCC: 3 | RNVC: 2
70850148: RNCC: 5 | RNVC: 9

31 Jan 1985

5340-14-551-3505
Angle Bracket

145513505
RA1M705364111N1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-394-8315
Retaining Band

143948315
M4EW1301711501: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-402-1695
Retaining Strap

144021695
DA2C202439221: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-551-5407
Mounting Plate

145515407
709886: RNCC: 3 | RNVC: 2

28 Sep 2006

5340-14-514-9100
Loop Clamp

145149100
241879: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-14-554-5536
Mounting Plate

145545536
9560118200: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-14-367-3856
Mending Plate

143673856
970131: RNCC: 3 | RNVC: 2
970131: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-351-9534
Retaining Strap

143519534
18233-379-690: RNCC: 3 | RNVC: 2
18233-379-690: RNCC: 5 | RNVC: 2

16 Oct 1978

5340-14-517-4057
Angle Bracket

145174057
803481130114: RNCC: 3 | RNVC: 2
SDM803481130114: RNCC: 5 | RNVC: 9

8 Dec 1999

5340-14-450-2156
Bumper

144502156
5000920677: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-545-6515
Mounting Bracket

145456515
F135275: RNCC: 3 | RNVC: 2

26 Apr 2005

5340-14-550-2952
Metal Grille

145502952
MB6560F00: RNCC: 3 | RNVC: 2

15 Jun 2006

5340-14-350-4753
Bridge Clamp

143504753
206694: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-497-3597
Corner Brace

144973597
4769810260: RNCC: 3 | RNVC: 2
F300 0T 023 0552: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-554-3088
Mounting Bracket

145543088
9405.49102: RNCC: 3 | RNVC: 2

20 Jun 2007

5340-14-527-3800
Runner

145273800
H145056W: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-506-8522
Bridge Clamp

145068522
B47235: RNCC: 3 | RNVC: 2

27 May 1998

5340-14-446-1540
Loop Clamp

144461540
504B611: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-514-9349
Section Block Clamp

145149349
RA1M701924111: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-14-455-9341
Pipe Hanger

144559341
PM1A727284001: RNCC: 3 | RNVC: 2
PM1A727284001: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-548-5616
Angle Bracket

145485616
5010465701: RNCC: 3 | RNVC: 2

26 Jan 2006

5340-14-424-5582
Loop Clamp

144245582
1664152M1: RNCC: 3 | RNVC: 2
1664152M1: RNCC: 5 | RNVC: 9

27 May 1988

5340-14-550-3345
Mounting Bracket

145503345
2715986090: RNCC: 3 | RNVC: 2

16 Jun 2006

5340-14-380-7302
Retaining Clip

143807302
1182151: RNCC: 3 | RNVC: 2
1182151: RNCC: 5 | RNVC: 2

29 Nov 1982

5340-14-483-3446
Anchor Strap

144833446
P106627H: RNCC: 3 | RNVC: 2

5 Sep 1996

5340-14-536-6744
Access Cover

145366744
46504841: RNCC: 3 | RNVC: 2

10 Sep 2003

5340-14-461-2893
Butt Hinge

144612893
2DM160679: RNCC: 3 | RNVC: 2
91714405: RNCC: 5 | RNVC: 2

3 Mar 1993

5340-14-508-7039
Loop Clamp

145087039
51300010024: RNCC: 3 | RNVC: 2

25 Sep 1998

5340-14-516-3640
Mounting Plate

145163640
CV17730: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-14-433-0197
Quick Release Pin

144330197
51453C12R20N: RNCC: 3 | RNVC: 2
91636008: RNCC: 5 | RNVC: 2
51453C12R20N: RNCC: 5 | RNVC: 2
51453C12R20N: RNCC: 5 | RNVC: 9

5 Jul 1989

5340-14-524-3731
Friction Catch

145243731
409802: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-14-536-1074
Mounting Bracket

145361074
803237130714: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-216-6901
Bumper

142166901
0547475200: RNCC: 3 | RNVC: 2
0547475200: RNCC: 3 | RNVC: 2
0547475200: RNCC: 3 | RNVC: 2
0547475200: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-357-8424
Lock-Release Lever

143578424
5000495610: RNCC: 3 | RNVC: 2
5000495610: RNCC: 5 | RNVC: 9

20 Jul 1979

5340-14-343-6444
Loop Clamp

143436444
ASNA0021-21G12: RNCC: 1 | RNVC: 2
51313102012: RNCC: 3 | RNVC: 2
21G12: RNCC: 5 | RNVC: 2
A0021-21G12: RNCC: 5 | RNVC: 2

13 Jul 1977

5340-14-503-0163
Cover Strip

145030163
332A58-1689-21: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-532-5003
Bow Handle

145325003
10-294-00: RNCC: 3 | RNVC: 2
SZ10.294.00: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-14-518-9770
Clamping Catch

145189770
645628: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-300-3349
Butt Hinge

143003349
15144083: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-455-8668
Mounting Bracket

144558668
5010054559: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-355-1049
Retaining Strap

143551049
150676: RNCC: 3 | RNVC: 2

19 Mar 1979

5340-14-483-4761
Runner

144834761
47134343: RNCC: 3 | RNVC: 2

12 Sep 1996

5340-14-486-2166
Mounting Bracket

144862166
10316716: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-456-2920
Angle Bracket

144562920
16929954: RNCC: 3 | RNVC: 2

25 Jun 1992

5340-14-464-8723
Metal Grille

144648723
29463127: RNCC: 3 | RNVC: 2

6 Sep 1993

5340-14-543-6466
Stand Base

145436466
61482527AA: RNCC: 3 | RNVC: 2

30 Nov 2004

5340-14-551-4944
Angle Bracket

145514944
RA1B701986341A1: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-385-9541
Mending Plate

143859541
5000498417: RNCC: 3 | RNVC: 2
5000498417: RNCC: 5 | RNVC: 9

24 Aug 1983

5340-14-338-6138
Support Hook

143386138
141725: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-523-3881
Mounting Bracket

145233881
0260122110: RNCC: 3 | RNVC: 2

17 Jan 2001

5340-14-459-7294
Cover Strip

144597294
LN321022REP7BJAG3: RNCC: 3 | RNVC: 2
RAB0165: RNCC: 5 | RNVC: 2

15 Dec 1992

5340-14-428-2397
Webbing Strap

144282397
16425870: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-481-6557
Mounting Bracket

144816557
79116320: RNCC: 3 | RNVC: 2
79116320: RNCC: 5 | RNVC: 9

23 May 1996

5340-14-461-9052
Section Block Clamp

144619052
T700A3010004105: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-329-2455
Pipe Hanger

143292455
F10A705200003A2: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-259-5980
Clamping Catch

142595980
99045677: RNCC: 3 | RNVC: 2
29255: RNCC: 3 | RNVC: 2
99045677: RNCC: 3 | RNVC: 2
99045677: RNCC: 5 | RNVC: 2
99045677: RNCC: 5 | RNVC: 2
99045677: RNCC: 5 | RNVC: 9
99045677: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-344-9916
Access Cover

143449916
0007009287: RNCC: 3 | RNVC: 2
7009287: RNCC: 5 | RNVC: 9
0007009287: RNCC: 5 | RNVC: 9

5 Oct 1977

5340-14-532-0193
Rod End Clevis

145320193
US0200021: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-354-2435
Access Cover

143542435
16321402: RNCC: 3 | RNVC: 2
16321402: RNCC: 5 | RNVC: 9

30 Jan 1979

5340-14-551-4930
Retaining Strap

145514930
RA1B703246311A1: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-508-0587
Mounting Bracket

145080587
4769701040: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-412-4096
Angle Bracket

144124096
229993: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-14-481-6645
Angle Bracket

144816645
20174949: RNCC: 3 | RNVC: 2

23 May 1996

5340-14-507-4702
Padlock

145074702
905M70: RNCC: 3 | RNVC: 2

16 Jul 1998

5340-14-382-4929
Loop Clamp

143824929
045S03-576103E: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-409-6960
Runner

144096960
78763DG0790A: RNCC: 3 | RNVC: 2
70002721: RNCC: 5 | RNVC: 2

28 May 1986

5340-14-483-6906
Loop Clamp

144836906
P109453: RNCC: 3 | RNVC: 2
F300 0T 015 5464: RNCC: 6 | RNVC: 9

27 Sep 1996

5340-14-552-0335
Access Cover

145520335
0249171130: RNCC: 3 | RNVC: 2

21 Nov 2006

5340-14-553-2820
Mounting Plate

145532820
TTMH1109 BC21: RNCC: 3 | RNVC: 2

20 Mar 2007

5340-14-365-7462
Friction Catch

143657462
0000757156: RNCC: 3 | RNVC: 2
0000757156: RNCC: 5 | RNVC: 9
757156: RNCC: 5 | RNVC: 9

8 Oct 1980

5340-14-511-5859
Rod End Connector

145115859
D65443: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-479-0178
Rod End Connector

144790178
6401009100: RNCC: 3 | RNVC: 2
F300 0T 020 6162: RNCC: 5 | RNVC: 9

6 Dec 1995

5340-14-549-4333
Mounting Bracket

145494333
21241604-4: RNCC: 3 | RNVC: 2

3 Apr 2006

5340-14-392-0989
Rod End Connector

143920989
8811287019: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-547-1444
Lock Bolt

145471444
63660: RNCC: 3 | RNVC: 2

28 Sep 2005

5340-14-346-8186
Mending Plate

143468186
326530: RNCC: 3 | RNVC: 2
20326530-3: RNCC: 5 | RNVC: 2

19 Jan 1978

5340-14-530-7835
Utility Access Door

145307835
CB.2.5: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-392-6761
Access Cover

143926761
174519: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-526-9884
Access Cover

145269884
T257A0006158: RNCC: 3 | RNVC: 2

20 Sep 2001

5340-14-301-0445
Rod End Connector

143010445
0160560036: RNCC: 3 | RNVC: 2
0160560036: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-550-5573
Loop Clamp

145505573
5000497777: RNCC: 3 | RNVC: 2

26 Jun 2006

5340-14-478-5711
Loop Clamp

144785711
7360003: RNCC: 3 | RNVC: 2

8 Nov 1995

5340-14-526-9579
Flush Catch Claw

145269579
10546160: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-541-8126
Furniture Cup

145418126
T947G5101223: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-545-3425
Rim Latch Set

145453425
200728: RNCC: 3 | RNVC: 2

6 Apr 2005

5340-14-541-5176
Bumper

145415176
1091472: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-402-0989
Mounting Plate

144020989
406181: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-517-9402
Access Cover

145179402
311-20435-1: RNCC: 3 | RNVC: 9

19 Jan 2000

5340-14-401-4189
Casement Fastener

144014189
330A87-2926-0001: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-356-0438
Angle Bracket

143560438
NO PRIMARY REF14-356-0438: RNCC: 3 | RNVC: 2
10035-4: RNCC: 5 | RNVC: 9

5 Apr 1979

5340-14-437-5376
Angle Bracket

144375376
NO PRIMARY REF14-437-5376: RNCC: 3 | RNVC: 2
557926: RNCC: 5 | RNVC: 9

7 Feb 1990

5340-14-440-6512
Mounting Bracket

144406512
31750414: RNCC: 3 | RNVC: 9

18 Jul 1990

5340-14-383-5041
Mounting Plate

143835041
20070806: RNCC: 3 | RNVC: 2
20070806: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-470-9967
Threaded Rod End

144709967
DA2C227109200: RNCC: 3 | RNVC: 2

20 Jul 1994

5340-14-444-5084
Mounting Bracket

144445084
123010302: RNCC: 3 | RNVC: 9

14 Jan 1991

5340-14-512-9673
Mounting Bracket

145129673
0264707740: RNCC: 3 | RNVC: 2
AX13768: RNCC: 5 | RNVC: 2

24 Feb 1999

5340-14-535-5123
Clamping Catch

145355123
10-703-957: RNCC: 3 | RNVC: 2
SZ10.703.957: RNCC: 3 | RNVC: 2

31 May 2003

5340-14-500-9079
Angle Bracket

145009079
E66501200007: RNCC: 3 | RNVC: 2
F300 0T 024 9287: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-448-1261
Mounting Bracket

144481261
0211421103: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-14-518-1668
Mounting Bracket

145181668
5010093532: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-487-4925
Retaining Strap

144874925
10048119: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-475-0849
Retaining Band

144750849
1081851N00: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-14-447-1533
Angle Bracket

144471533
N110141: RNCC: 3 | RNVC: 2

3 May 1991

5340-14-549-1963
Loop Clamp

145491963
5010323838: RNCC: 3 | RNVC: 2

8 Mar 2006

5340-14-536-0856
Mounting Bracket

145360856
91307052901: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-446-0050
Mounting Plate

144460050
3420050MI: RNCC: 3 | RNVC: 2

4 Mar 1991

5340-14-543-0299
Pipe Hanger

145430299
A11A532320211: RNCC: 3 | RNVC: 2

18 Aug 2004

5340-14-446-2085
Loop Clamp

144462085
0120720008: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-485-0233
Mending Plate

144850233
1008803X00: RNCC: 3 | RNVC: 2
1008803X00: RNCC: 5 | RNVC: 2

19 Dec 1996

5340-14-277-7485
Angle Bracket

142777485
154578: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-555-2166
Angle Bracket

145552166
RA1M794200851N2: RNCC: 3 | RNVC: 2

10 Oct 2007

5340-14-290-2031
Loop Clamp

142902031
0260607710: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-515-3030
Expansion Plug

145153030
0009527004: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-328-7301
Access Cover

143287301
0000249636: RNCC: 3 | RNVC: 2
249636: RNCC: 5 | RNVC: 9
0000249636: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-346-8794
Runner

143468794
26425886: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-14-486-5130
Mounting Bracket

144865130
94018676: RNCC: 3 | RNVC: 2

21 Mar 1997

5340-14-471-5299
Mounting Plate

144715299
5310002A: RNCC: 3 | RNVC: 2

31 Aug 1994

5340-14-372-2805
Mending Plate

143722805
227572: RNCC: 3 | RNVC: 2
227572: RNCC: 5 | RNVC: 9

1 Sep 1981

5340-14-319-8285
Quick Release Pin

143198285
121S83-560-20-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-296-9352
Tee Hinge

142969352
6563-62X22-6X52-6X0X33ALLIALP0LI: RNCC: 3 | RNVC: 2
51-1-1-3300: RNCC: 5 | RNVC: 2
VDP1003: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-484-9163
Bail Handle

144849163
21340057-00: RNCC: 3 | RNVC: 2
21340057 4: RNCC: 5 | RNVC: 2

12 Dec 1996

5340-14-464-8270
Mortise Lock Set

144648270
484C-1-3N: RNCC: 3 | RNVC: 2

1 Sep 1993

5340-14-549-6372
Utility Access Door

145496372
JCB 10 136-302: RNCC: 3 | RNVC: 2

24 Apr 2006

5340-14-285-4659
Plug Button

142854659
344-166: RNCC: 3 | RNVC: 2
3933P27: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-397-7081
Key Blank

143977081
9510-11CLAVETTE8X8X500E36-3: RNCC: 2 | RNVC: 2

14 Dec 1984

5340-14-517-3664
Protection Bellows

145173664
270-00-027-B: RNCC: 3 | RNVC: 2
270-00-027: RNCC: 5 | RNVC: 2

8 Dec 1999

5340-14-420-0357
Webbing Strap

144200357
4-012-0051: RNCC: 3 | RNVC: 2

18 Nov 1987

5340-14-521-2514
Plug Button

145212514
350A77-1213-21: RNCC: 3 | RNVC: 2

12 Jul 2000

5340-14-377-1642
Mounting Plate

143771642
NO PRIMARY REF14-377-1642: RNCC: 3 | RNVC: 2
145260B: RNCC: 5 | RNVC: 9
2-145260-2: RNCC: 5 | RNVC: 9

17 May 1982

5340-14-373-7085
Utility Access Door

143737085
365A25-0014-0505: RNCC: 3 | RNVC: 2

14 Mar 1996

5340-14-507-5399
Loop Clamp

145075399
253104800: RNCC: 3 | RNVC: 2
A0021-25G48: RNCC: 5 | RNVC: 2
A0021-25G48: RNCC: 5 | RNVC: 2
25G48: RNCC: 5 | RNVC: 2
ASNA0021-25G48: RNCC: 5 | RNVC: 2

16 Jul 1998

5340-14-420-1101
Loop Clamp

144201101
41D: RNCC: 3 | RNVC: 9

18 Nov 1987

5340-14-468-0046
Cane Bolt

144680046
IPC12INOX: RNCC: 3 | RNVC: 2
SYQ3461: RNCC: 5 | RNVC: 2

4 Feb 1994

5340-14-351-2386
Rod End Connector

143512386
24C5435: RNCC: 3 | RNVC: 2
483310M: RNCC: 5 | RNVC: 2

10 Aug 1978

5340-14-528-3473
Mortise Lock

145283473
5100: RNCC: 3 | RNVC: 2

23 Jan 2002

5340-14-301-1204
Access Cover

143011204
1850-7: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-422-5765
Mortise Lock Set

144225765
38467: RNCC: 3 | RNVC: 2

10 Mar 1988

5340-14-358-5560
Mending Plate

143585560
390470: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-551-9825
Mounting Bracket

145519825
82179824000: RNCC: 3 | RNVC: 2

15 Nov 2006

5340-14-523-6309
Mounting Plate

145236309
A5120329: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-471-2628
Mounting Plate

144712628
781218: RNCC: 3 | RNVC: 2

10 Aug 1994

5340-14-372-1273
Webbing Strap

143721273
146830: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-474-4515
Loop Clamp

144744515
51121905024: RNCC: 3 | RNVC: 2
24PE24: RNCC: 5 | RNVC: 2
25PE24: RNCC: 5 | RNVC: 2

15 Feb 1995

5340-14-541-5431
Angle Bracket

145415431
2092165: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-254-4232
Bumper

142544232
22A: RNCC: 3 | RNVC: 2
AUD22MM: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-373-8724
Mounting Plate

143738724
255475: RNCC: 3 | RNVC: 2
255475: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-14-523-4130
Mounting Plate

145234130
10221842: RNCC: 3 | RNVC: 2

19 Jan 2001

5340-14-540-0697
Mounting Bracket

145400697
095251 857 33: RNCC: 3 | RNVC: 2
09525185733: RNCC: 5 | RNVC: 2

4 Mar 2004

5340-14-483-8007
Bumper

144838007
8001985C00: RNCC: 1 | RNVC: 2
1CD10953700: RNCC: 3 | RNVC: 2

3 Oct 1996

5340-14-512-8442
Loop Clamp

145128442
21979: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-474-8912
Retaining Bail

144748912
10362618: RNCC: 3 | RNVC: 2

8 Mar 1995

5340-14-577-7816
Utility Resilient Mount

145777816
82685655000: RNCC: 3 | RNVC: 2

9 Oct 2013

5340-14-539-9600
Angle Bracket

145399600
RA1B701303031N1: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-436-2098
Mounting Plate

144362098
DA2C228651A1: RNCC: 3 | RNVC: 2

6 Dec 1989

5340-14-534-8591
Mounting Bracket

145348591
10665907000: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-14-208-2188
Retaining Strap

142082188
3121310: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-226-0778
Retaining Strap

142260778
10434C80: RNCC: 3 | RNVC: 9
0003446484: RNCC: 5 | RNVC: 2
3446484: RNCC: 5 | RNVC: 9
0003446484: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-436-5793
Cover Strip

144365793
DA2C293611014: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-516-8746
Mounting Bracket

145168746
00-1090-SP2306: RNCC: 3 | RNVC: 9

20 Oct 1999

5340-14-541-8473
Mounting Bracket

145418473
1031065020: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-437-2144
Metal Grille

144372144
1102306: RNCC: 3 | RNVC: 2
807942: RNCC: 5 | RNVC: 2

23 Jan 1990

5340-14-287-1765
Loop Clamp

142871765
204826: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-324-5954
Angle Bracket

143245954
M123869: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-397-9518
Retaining Clip

143979518
5400104: RNCC: 3 | RNVC: 2
FOE5400104: RNCC: 5 | RNVC: 9

31 Jan 1985

5340-14-236-1281
Retaining Strap

142361281
160-62452: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-457-1825
Angle Bracket

144571825
39467437: RNCC: 3 | RNVC: 2
39467437: RNCC: 5 | RNVC: 9

13 Aug 1992

5340-14-417-1401
Retaining Strap

144171401
BAZ7848: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-14-464-3388
Bumper

144643388
ST406M42P171: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-336-7259
Mending Plate

143367259
180523: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-551-2860
Mounting Bracket

145512860
RA1B703246563: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-482-7238
Mounting Bracket

144827238
1077129A01: RNCC: 3 | RNVC: 2

25 Jul 1996

5340-14-498-4546
Metal Grille

144984546
91966418: RNCC: 3 | RNVC: 2
111-570X260: RNCC: 3 | RNVC: 2
F300 0T 005 1474: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-474-4559
Angle Bracket

144744559
50762: RNCC: 3 | RNVC: 2
050762: RNCC: 5 | RNVC: 2

15 Feb 1995

5340-14-460-9174
Mounting Bracket

144609174
TB4011873: RNCC: 3 | RNVC: 2

16 Feb 1993

5340-14-316-2077
Retaining Strap

143162077
F700-042: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-530-5522
Threaded Rod End

145305522
E4M247-19-822: RNCC: 3 | RNVC: 2

20 Jun 2002

5340-14-484-1094
Mounting Bracket

144841094
8401-0213: RNCC: 3 | RNVC: 2

24 Oct 1996

5340-14-381-3729
Support Hook

143813729
7950-06: RNCC: 3 | RNVC: 2
7384786100: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-438-4779
Metal Grille

144384779
332A61-1340-62: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-471-6028
Roller Holder

144716028
312-05791-013: RNCC: 3 | RNVC: 2

7 Sep 1994

5340-14-407-1353
Lock Bolt

144071353
350A25-1250-13: RNCC: 3 | RNVC: 2

11 Feb 1986

5340-14-470-9849
Mounting Plate

144709849
LBR532A201-410U1: RNCC: 3 | RNVC: 2

20 Jul 1994

5340-14-511-6331
Pipe Hanger

145116331
78732-016-060D: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-508-7774
Access Cover

145087774
BS2842.08.00.002: RNCC: 3 | RNVC: 2
BS2842-08-00-002: RNCC: 5 | RNVC: 9

30 Sep 1998

5340-14-539-4268
Pipe Hanger

145394268
21247177-00: RNCC: 3 | RNVC: 2
21247177-7: RNCC: 5 | RNVC: 2

14 Jan 2004

5340-14-474-1274
Angle Bracket

144741274
341A58-1024-02: RNCC: 3 | RNVC: 2
F300 0T 014 5287: RNCC: 5 | RNVC: 9

25 Jan 1995

5340-14-422-4720
Friction Catch

144224720
Z310-022-000A: RNCC: 3 | RNVC: 2

3 Mar 1988

5340-14-489-4675
Mounting Bracket

144894675
10082230: RNCC: 3 | RNVC: 2

23 Jul 1997

5340-14-551-5448
Mounting Bracket

145515448
711430: RNCC: 3 | RNVC: 2

29 Sep 2006

5340-14-478-9043
Bumper

144789043
5000729103: RNCC: 3 | RNVC: 2

30 Nov 1995

5340-14-551-3450
Angle Bracket

145513450
RA1M701536061: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-550-9218
Angle Bracket

145509218
RA1B702202441A1N1: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-551-3355
Pipe Hanger

145513355
RA1A701336623N1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-551-3435
Angle Bracket

145513435
RA1M701235111N1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-480-9870
Loop Clamp

144809870
0320777160: RNCC: 3 | RNVC: 2

12 Apr 1996

5340-14-513-3430
Bridge Clamp

145133430
502803: RNCC: 3 | RNVC: 2

16 Mar 1999

5340-14-551-3484
Angle Bracket

145513484
RA1M702606033: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-551-3519
Angle Bracket

145513519
RA1M709315111: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-511-9057
Bow Handle

145119057
46231457: RNCC: 3 | RNVC: 9
46231457: RNCC: 5 | RNVC: 2

28 Jan 1999

5340-14-475-0290
Bridge Clamp

144750290
39456055: RNCC: 3 | RNVC: 2
39456055: RNCC: 3 | RNVC: 9

16 Mar 1995

5340-14-552-8827
Mounting Bracket

145528827
82029831000: RNCC: 3 | RNVC: 2

10 Feb 2007

5340-14-401-3269
Mounting Plate

144013269
02K5547430: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-513-8077
Angle Bracket

145138077
DE21820: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-435-4782
Angle Bracket

144354782
DA2C201721513: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-14-490-4553
Mounting Bracket

144904553
DKP12ENSUP1 10291: RNCC: 3 | RNVC: 2
DKP12ENSUP1 10291: RNCC: 5 | RNVC: 2

1 Oct 1997

5340-14-525-8447
Bumper

145258447
N135209: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-506-4531
Access Cover

145064531
4135410220: RNCC: 3 | RNVC: 2

29 Apr 1998

5340-14-403-3996
Webbing Strap

144033996
23681: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-384-7822
Angle Bracket

143847822
20070223: RNCC: 3 | RNVC: 2
20070223: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-465-0604
Mounting Plate

144650604
24C614: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-354-0080
Angle Bracket

143540080
A11A232952040: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-551-3433
Angle Bracket

145513433
RA1M701206153: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-473-9446
Mending Plate

144739446
20859888: RNCC: 3 | RNVC: 2
20859888: RNCC: 3 | RNVC: 9

18 Jan 1995

5340-14-455-4062
Mounting Plate

144554062
EDM0248: RNCC: 3 | RNVC: 2
91396134: RNCC: 5 | RNVC: 2

21 May 1992

5340-14-549-7889
Mounting Bracket

145497889
W006920204: RNCC: 3 | RNVC: 2

12 May 2006

5340-14-444-9300
Mounting Bracket

144449300
572164: RNCC: 3 | RNVC: 2

29 Jan 1991

5340-14-501-6007
Angle Bracket

145016007
46062317: RNCC: 3 | RNVC: 2
46062317: RNCC: 5 | RNVC: 2
F300 0T 025 0274: RNCC: 6 | RNVC: 9

5 Nov 1997

5340-14-403-4453
Mending Plate

144034453
8130300: RNCC: 3 | RNVC: 2
313193: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-505-6848
Mounting Bracket

145056848
326225D36682: RNCC: 3 | RNVC: 2
0231: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-281-2136
Retaining Strap

142812136
202671: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-444-7762
Synchro Clamp

144447762
0824523800: RNCC: 3 | RNVC: 2
F300 0T 002 9290: RNCC: 6 | RNVC: 9

21 Jan 1991

5340-14-322-3593
Bow Handle

143223593
M427049: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-503-7628
Cushioning Pad

145037628
3522 503 00904: RNCC: 3 | RNVC: 2

28 Jan 1998

5340-14-444-6512
Butt Hinge

144446512
91PD120204: RNCC: 3 | RNVC: 2

16 Jan 1991

5340-14-546-5959
Retaining Strap

145465959
RA1M701256013: RNCC: 3 | RNVC: 2

21 Jul 2005

5340-14-450-7438
Retaining Clip

144507438
416611: RNCC: 3 | RNVC: 2

21 Oct 1991

5340-14-202-3132
Loop Clamp

142023132
STD52: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-505-6555
Mounting Bracket

145056555
D25001000079: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-399-9865
Angle Bracket

143999865
603686: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-409-5394
Mending Plate

144095394
H301AFA20: RNCC: 3 | RNVC: 2
H301AFA20: RNCC: 5 | RNVC: 9

28 May 1986

5340-14-384-7212
Angle Bracket

143847212
16762372: RNCC: 3 | RNVC: 2
16762372: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-410-2533
Bow Handle

144102533
8155: RNCC: 3 | RNVC: 2
91599360: RNCC: 5 | RNVC: 2
8155: RNCC: 5 | RNVC: 9

18 Jun 1986

5340-14-454-2541
Mounting Plate

144542541
16347301: RNCC: 3 | RNVC: 2

26 Mar 1992

5340-14-396-5821
Slide Keeper

143965821
011312: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-436-6755
Mounting Plate

144366755
DA2C773234: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-394-1648
Clamping Catch

143941648
8030: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-393-8445
Mounting Plate

143938445
8811636021: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-407-6438
Control Rod

144076438
H2613311: RNCC: 3 | RNVC: 9

27 Feb 1986

5340-14-523-2904
Pipe Hanger

145232904
RA1M702316220: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-460-9171
Mounting Bracket

144609171
TB4011884: RNCC: 3 | RNVC: 2

16 Feb 1993

5340-14-549-0894
Angle Bracket

145490894
RA1M701346481N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-500-9197
Mounting Plate

145009197
E67200000009: RNCC: 3 | RNVC: 2
F300 0T 024 9406: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-547-5972
Mounting Bracket

145475972
G990302: RNCC: 3 | RNVC: 2

18 Oct 2005

5340-14-546-9689
Cover Strip

145469689
RB1B701476611: RNCC: 3 | RNVC: 2

12 Sep 2005

5340-14-548-9871
Angle Bracket

145489871
21244463-00: RNCC: 3 | RNVC: 2

28 Feb 2006

5340-14-438-9750
Lock-Release Lever

144389750
332A27-2928-00: RNCC: 3 | RNVC: 2

11 Apr 1990

5340-14-510-1105
Access Cover

145101105
F294-63RS1: RNCC: 3 | RNVC: 2
1560AA8007491: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-388-8956
Detent Plunger

143888956
365A25-5010-22: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-356-7565
Angle Bracket

143567565
NO PRIMARY REF14-356-7565: RNCC: 3 | RNVC: 2
B40EA5010-022: RNCC: 5 | RNVC: 9

15 May 1979

5340-14-241-1150
Lock Bolt

142411150
321A58-0413-05: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-560-1799
Utility Resilient Mount

145601799
ACI48-10 NN: RNCC: 3 | RNVC: 9

31 Mar 2009

5340-14-238-7641
Rod End Clevis

142387641
R12608D10AEZ: RNCC: 2 | RNVC: 2
ST406M41P55-17: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-410-3100
Doorstop

144103100
332A22-1466-20: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-14-494-9904
Mounting Plate

144949904
4307-0160: RNCC: 3 | RNVC: 2
F300 0T 018 1542: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-376-7948
Plug Button

143767948
78680-100046: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-472-6637
Mounting Bracket

144726637
GA1-69626: RNCC: 3 | RNVC: 2

9 Nov 1994

5340-14-522-0184
Access Cover

145220184
965961: RNCC: 3 | RNVC: 2
18-OC-033-REP3: RNCC: 5 | RNVC: 9

27 Sep 2000

5340-14-363-8944
Access Cover

143638944
NO PRIMARY REF14-363-8944: RNCC: 3 | RNVC: 2
Y46798: RNCC: 5 | RNVC: 9

7 Aug 1980

5340-14-206-5965
Rod End Connector

142065965
502-705-281-0: RNCC: 3 | RNVC: 2
502-705-281-0: RNCC: 8 | RNVC: 2

1 Jan 1964

5340-14-393-8350
Loop Clamp

143938350
51300005032: RNCC: 3 | RNVC: 2
11N32: RNCC: 5 | RNVC: 2
A0021-11N32: RNCC: 5 | RNVC: 2

23 Jun 1984

5340-14-311-1066
Rod End Clevis

143111066
773-218-820DET40: RNCC: 3 | RNVC: 2
773-218-820DET40: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-359-5926
Angle Bracket

143595926
NO PRIMARY REF14-359-5926: RNCC: 3 | RNVC: 2
50828: RNCC: 5 | RNVC: 9

15 Oct 1979

5340-14-552-8818
Access Cover

145528818
82176283000: RNCC: 3 | RNVC: 2

10 Feb 2007

5340-14-366-8156
Mending Plate

143668156
970287: RNCC: 3 | RNVC: 2
970287: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-501-1019
Mounting Bracket

145011019
162210104: RNCC: 3 | RNVC: 2
F300 0T 025 1407: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-312-0209
Bumper

143120209
26250659: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-530-1222
Mounting Bracket

145301222
TB3030101F200: RNCC: 3 | RNVC: 2

14 May 2002

5340-14-521-3444
Mounting Bracket

145213444
91779845: RNCC: 3 | RNVC: 2
434 00 376: RNCC: 3 | RNVC: 2

20 Jul 2000

5340-14-479-8090
Access Cover

144798090
006V667: RNCC: 3 | RNVC: 2
006V667: RNCC: 3 | RNVC: 2
1117421Q00: RNCC: 5 | RNVC: 2

7 Feb 1996

5340-14-382-2538
Anchor Strap

143822538
0000578677: RNCC: 3 | RNVC: 2
578677: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-541-5329
Bumper

145415329
1091646: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-518-3648
Access Cover

145183648
10473884: RNCC: 3 | RNVC: 2

2 Feb 2000

5340-14-475-3267
Access Cover

144753267
575402: RNCC: 3 | RNVC: 2

29 Mar 1995

5340-14-549-8426
Mounting Bracket

145498426
2092783: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-448-4708
Mounting Bracket

144484708
27110204-4: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-14-482-0913
Mounting Plate

144820913
22097340: RNCC: 3 | RNVC: 2
22097340: RNCC: 5 | RNVC: 9

20 Jun 1996

5340-14-545-7919
Mounting Bracket

145457919
713398: RNCC: 3 | RNVC: 2

13 May 2005

5340-14-518-4255
Retaining Clip

145184255
7700016261: RNCC: 3 | RNVC: 2

7 Feb 2000

5340-14-470-1876
Bumper

144701876
E1RP553S77: RNCC: 3 | RNVC: 2
E1RP553S77: RNCC: 5 | RNVC: 2

8 Jun 1994

5340-14-532-0663
Mounting Bracket

145320663
03-702-718: RNCC: 3 | RNVC: 2
SZ03.702.718: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-293-3816
Access Cover

142933816
0074710020: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-476-9097
Mounting Plate

144769097
R900308501: RNCC: 3 | RNVC: 2
RAR3556: RNCC: 5 | RNVC: 2
308501: RNCC: 5 | RNVC: 9

11 Jul 1995

5340-14-480-0973
Shelf Bracket

144800973
RA1M240000440N1: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-552-2321
Cover Strip

145522321
SZ18.251.276: RNCC: 3 | RNVC: 2

5 Dec 2006

5340-14-507-9686
Mounting Bracket

145079686
564157: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-471-3101
Bumper

144713101
5000814041: RNCC: 3 | RNVC: 2

17 Aug 1994

5340-14-504-7026
Loop Clamp

145047026
040971E: RNCC: 3 | RNVC: 2
5010146710: RNCC: 3 | RNVC: 2

27 Feb 1998

5340-14-525-5338
Access Cover

145255338
4678714A: RNCC: 3 | RNVC: 2

12 Jun 2001

5340-14-505-3809
Runner

145053809
10214051: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-531-9719
Mounting Bracket

145319719
YT11V400: RNCC: 3 | RNVC: 2

2 Oct 2002

5340-14-550-4882
Angle Bracket

145504882
RA1M701752171N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-518-1382
Loop Clamp

145181382
5000807441: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-228-9613
Rod End Clevis

142289613
0117G133: RNCC: 3 | RNVC: 9
0117G133: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-521-2916
Access Cover

145212916
10491548: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-14-521-4069
Access Cover

145214069
46251248: RNCC: 3 | RNVC: 2
46251248: RNCC: 3 | RNVC: 9

26 Jul 2000

5340-14-478-3987
Mounting Bracket

144783987
0766919D00: RNCC: 3 | RNVC: 2

27 Oct 1995

5340-14-534-7423
Retaining Strap

145347423
39073022: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-250-0896
Loop Clamp

142500896
51200005014: RNCC: 3 | RNVC: 2
10N14: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-552-4998
Mounting Plate

145524998
E238524: RNCC: 3 | RNVC: 2

9 Jan 2007

5340-14-555-2173
Angle Bracket

145552173
RA1M705136113: RNCC: 3 | RNVC: 2

10 Oct 2007

5340-14-514-9356
Mounting Plate

145149356
RA1M701944120A1: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-14-512-7473
Plug Button

145127473
800033751: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-551-8679
Angle Bracket

145518679
0025637: RNCC: 3 | RNVC: 2

3 Nov 2006

5340-14-524-9645
Bumper

145249645
06943: RNCC: 3 | RNVC: 2

9 May 2001

5340-14-504-9337
Mounting Bracket

145049337
SUPPO94337X00: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-517-6207
Mounting Plate

145176207
RA1M228710050A1: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-507-9696
Bumper

145079696
553992: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-517-3251
Mounting Bracket

145173251
F1262333: RNCC: 3 | RNVC: 2
F1262333: RNCC: 5 | RNVC: 2

2 Dec 1999

5340-14-544-4248
Mounting Plate

145444248
5001864789: RNCC: 3 | RNVC: 2

31 Jan 2005

5340-14-439-0131
Synchro Clamp

144390131
N01018584: RNCC: 3 | RNVC: 2

18 Apr 1990

5340-14-551-3496
Angle Bracket

145513496
RA1M703749171N1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-310-7365
Angle Bracket

143107365
TH20G1383: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-483-8070
Mounting Plate

144838070
8000716G00: RNCC: 3 | RNVC: 2

3 Oct 1996

5340-14-237-9645
Angle Bracket

142379645
0000471213: RNCC: 3 | RNVC: 2
471213: RNCC: 5 | RNVC: 9
0000471213: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-527-8740
Snap Hook

145278740
2879021: RNCC: 3 | RNVC: 2

28 Nov 2001

5340-14-443-0921
Cover Strip

144430921
DA1N202732361: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-14-392-5423
Angle Bracket

143925423
A11A221274322: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-554-3138
Mounting Bracket

145543138
T537A2001146: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-451-5269
Angle Bracket

144515269
BLC235415: RNCC: 3 | RNVC: 2

21 Nov 1991

5340-14-546-1289
Compression Cup

145461289
PD01993A: RNCC: 3 | RNVC: 2

14 Jun 2005

5340-14-483-8074
Mounting Plate

144838074
8000715F00: RNCC: 3 | RNVC: 2

3 Oct 1996

5340-14-541-6628
Retaining Clip

145416628
699587: RNCC: 3 | RNVC: 2

17 Jun 2004

5340-14-391-9690
Loop Clamp

143919690
MBEU72317: RNCC: 3 | RNVC: 2
034976: RNCC: 5 | RNVC: 2

21 Mar 1984

5340-14-373-7913
Loop Clamp

143737913
16685784: RNCC: 3 | RNVC: 2

13 Nov 1981

5340-14-546-5910
Angle Bracket

145465910
RA1M701126661: RNCC: 3 | RNVC: 2

20 Jul 2005

5340-14-548-1164
Loop Clamp

145481164
5010552411: RNCC: 3 | RNVC: 2

12 Dec 2005

5340-14-524-5285
Retaining Strap

145245285
0120780078: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-14-480-3913
Bumper

144803913
263255: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-425-4538
Angle Bracket

144254538
557382: RNCC: 3 | RNVC: 2

5 Jul 1988

5340-14-394-2977
Bumper

143942977
M4ZS460D2382: RNCC: 3 | RNVC: 2

28 Aug 1984

5340-14-552-1559
Lock Bolt

145521559
SZ2466.000: RNCC: 3 | RNVC: 2
SZ2466: RNCC: 5 | RNVC: 2

29 Nov 2006

5340-14-429-9935
Threaded Rod End

144299935
234525: RNCC: 3 | RNVC: 2
89412016: RNCC: 5 | RNVC: 2

22 Feb 1989

5340-14-364-8671
Butt Hinge

143648671
36D90X60CAD: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-14-489-8774
Mounting Bracket

144898774
BB2148: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-14-472-3125
Mounting Bracket

144723125
A62230: RNCC: 3 | RNVC: 2

19 Oct 1994

5340-14-471-9445
Detent Plunger

144719445
38018379: RNCC: 3 | RNVC: 2
38018379: RNCC: 5 | RNVC: 9

28 Sep 1994

5340-14-553-0518
Mounting Bracket

145530518
074A005: RNCC: 3 | RNVC: 2

27 Feb 2007

5340-14-457-5993
Pipe Hanger

144575993
PM1A596114030: RNCC: 3 | RNVC: 2
PM1A596114030: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-547-7809
Mounting Bracket

145477809
7420787240: RNCC: 3 | RNVC: 2

12 Nov 2005

5340-14-341-9550
Bow Handle

143419550
A11A262100026U1: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-430-5410
Retaining Strap

144305410
PM1A167130411: RNCC: 3 | RNVC: 2
PM1A167130411: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-458-8714
Synchro Clamp

144588714
39067740: RNCC: 3 | RNVC: 2

5 Nov 1992

5340-14-449-2197
Bumper

144492197
0029535053: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-455-3648
Bumper

144553648
5000279112: RNCC: 3 | RNVC: 2

21 May 1992

5340-14-355-8411
Bridge Clamp

143558411
18126311: RNCC: 3 | RNVC: 2
18126311: RNCC: 3 | RNVC: 9

5 Apr 1979

5340-14-462-6302
Mounting Plate

144626302
MA1094F00: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-14-449-9991
Mounting Bracket

144499991
5000921406: RNCC: 3 | RNVC: 2

18 Sep 1991

5340-14-455-9617
Retaining Bail

144559617
PM1A796050115: RNCC: 3 | RNVC: 2
PM1A796050115: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-467-1134
Angle Bracket

144671134
16959381: RNCC: 3 | RNVC: 2
16959381: RNCC: 5 | RNVC: 9

16 Dec 1993

5340-14-555-1307
Mounting Bracket

145551307
82186782000: RNCC: 3 | RNVC: 2

3 Oct 2007

5340-14-448-0112
Cushioning Pad

144480112
1700-18: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-14-480-4876
Metal Grille

144804876
GFACA09: RNCC: 3 | RNVC: 2
F0026330: RNCC: 5 | RNVC: 9

14 Mar 1996

5340-14-461-1621
Mounting Bracket

144611621
4772820030: RNCC: 3 | RNVC: 2
5046060: RNCC: 5 | RNVC: 9

24 Feb 1993

5340-14-542-3447
Mounting Bracket

145423447
10649714: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-14-543-5759
Mounting Bracket

145435759
E0708G2E: RNCC: 1 | RNVC: 2
E0708G2E: RNCC: 3 | RNVC: 2

23 Nov 2004

5340-14-511-1020
Loop Clamp

145111020
23002001: RNCC: 3 | RNVC: 2
9610066480: RNCC: 5 | RNVC: 2

2 Dec 1998

5340-14-329-7082
Pipe Hanger

143297082
2264202260: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-362-9668
Retaining Band

143629668
503R143: RNCC: 3 | RNVC: 2
5000055234: RNCC: 5 | RNVC: 2
5000055234: RNCC: 5 | RNVC: 9

3 Apr 1980

5340-14-301-4463
Butt Hinge

143014463
P26-306-90X45GS0UDEEAC: RNCC: 4 | RNVC: 1

1 Jan 1973

5340-14-354-2600
Anchor Strap

143542600
650-44117-00: RNCC: 3 | RNVC: 2
650-44117-01: RNCC: 5 | RNVC: 2

30 Jan 1979

5340-14-398-6412
Webbing Strap

143986412
E20-5M: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-326-7286
Rod End Clevis

143267286
264-1M313P27B: RNCC: 3 | RNVC: 9
PA264-1M313P27B: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-293-1882
Loop Clamp

142931882
51113105050: RNCC: 3 | RNVC: 2
A0021-25G50: RNCC: 5 | RNVC: 2
25G50: RNCC: 5 | RNVC: 2
ASNA0021-25G50: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-312-8500
Cover Strip

143128500
160-12266: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-437-9487
Butt Hinge

144379487
330A58-3208-20: RNCC: 3 | RNVC: 2

28 Feb 1990

5340-14-479-2712
Runner

144792712
SS-HD-1150S: RNCC: 3 | RNVC: 2
KK15M2201C/REP512: RNCC: 5 | RNVC: 2

3 Jan 1996

5340-14-517-5560
Butt Hinge

145175560
38963PA06-1830: RNCC: 3 | RNVC: 2
38963PA06: RNCC: 5 | RNVC: 2

5 Jan 2000

5340-14-272-2619
Retaining Strap

142722619
NO PRIMARY REF14-272-2619: RNCC: 3 | RNVC: 2
0900015: RNCC: 5 | RNVC: 9
1142: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-504-3875
Block Clamp

145043875
709R/K0366: RNCC: 3 | RNVC: 2
709R: RNCC: 5 | RNVC: 2

11 Feb 1998

5340-14-484-7758
Access Cover

144847758
CCN301-420-414A2EQU: RNCC: 3 | RNVC: 2

5 Dec 1996

5340-14-379-8206
Loop Clamp

143798206
255302400: RNCC: 3 | RNVC: 2
A0021-25S24: RNCC: 5 | RNVC: 2
25S24: RNCC: 5 | RNVC: 9
51115305024: RNCC: 5 | RNVC: 9

20 Oct 1982

5340-14-449-3943
Cover Strip

144493943
MY20552-3058: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-302-4788
Handwheel

143024788
319A81-01-002: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-340-0084
Access Cover

143400084
R0025-746F3: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-338-3627
Retaining Strap

143383627
011-2460: RNCC: 3 | RNVC: 2
11-2460: RNCC: 5 | RNVC: 2

6 Nov 1976

5340-14-201-2928
Retaining Strap

142012928
NO PRIMARY REF14-201-2928: RNCC: 3 | RNVC: 2
1200-4: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-14-446-2830
Quick Release Pin

144462830
5000710427: RNCC: 3 | RNVC: 2

12 Mar 1991

5340-14-521-7072
Mounting Plate

145217072
473199: RNCC: 3 | RNVC: 2

6 Sep 2000

5340-14-515-4209
Loop Clamp

145154209
41610008A: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-513-9061
Mounting Bracket

145139061
101208: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-352-7266
Anchor Strap

143527266
573899086: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-488-7272
Access Cover

144887272
31500N2235862L00: RNCC: 3 | RNVC: 2
0881756E00: RNCC: 5 | RNVC: 2
2 235 862 L 00: RNCC: 5 | RNVC: 2

28 May 1997

5340-14-507-4548
Access Cover

145074548
46831272: RNCC: 3 | RNVC: 2

8 Jul 1998

5340-14-332-9683
Access Cover

143329683
186155: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-399-4005
Rod End Clevis

143994005
103112420201: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-323-3424
Detent Plunger

143233424
466-9M5P267: RNCC: 3 | RNVC: 2
466-9M5P267: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-354-8530
Access Cover

143548530
0000133440: RNCC: 3 | RNVC: 2
0000133440: RNCC: 5 | RNVC: 9
133440: RNCC: 5 | RNVC: 9

20 Feb 1979

5340-14-351-0500
Access Cover

143510500
22349534: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-496-0089
Webbing Strap

144960089
NM105: RNCC: 3 | RNVC: 9
F300 0T 020 7563: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-545-8445
Mounting Bracket

145458445
1001678: RNCC: 3 | RNVC: 2

19 May 2005

5340-14-546-4764
Loop Clamp

145464764
298540125: RNCC: 3 | RNVC: 2
5010571652: RNCC: 5 | RNVC: 2

6 Jul 2005

5340-14-448-6324
Runner

144486324
44030488: RNCC: 3 | RNVC: 2
44030488: RNCC: 5 | RNVC: 9

4 Jul 1991

5340-14-366-6180
Rod End Connector

143666180
MBEU39003: RNCC: 3 | RNVC: 2
033855: RNCC: 5 | RNVC: 2

20 Nov 1980

5340-14-349-7352
Rod End Clevis

143497352
0249970290: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-247-9082
Flush Catch

142479082
270681: RNCC: 3 | RNVC: 2
270681: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-224-4183
Loop Clamp

142244183
251900950: RNCC: 3 | RNVC: 2
25P9-5: RNCC: 5 | RNVC: 2
9562810420: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-549-8461
Eye Hook

145498461
F1261541: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-226-1871
Loop Clamp

142261871
15N17-5: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-526-2332
Access Cover

145262332
H116022: RNCC: 3 | RNVC: 2

11 Jul 2001

5340-14-533-7999
Mounting Bracket

145337999
F1262807: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-572-4216
Utility Access Door

145724216
0043183: RNCC: 3 | RNVC: 2
0043183: RNCC: 5 | RNVC: 9

3 Jul 2012

5340-14-503-1480
Access Cover

145031480
PM1A231143A1: RNCC: 3 | RNVC: 2
PM1A231143A1: RNCC: 5 | RNVC: 2

7 Jan 1998

5340-14-306-1688
Foot Bolt

143061688
S3Z59363063: RNCC: 3 | RNVC: 2
S3Z59363613: RNCC: 5 | RNVC: 2
029683: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-430-5631
Cover Strip

144305631
PM1A216450021: RNCC: 3 | RNVC: 2
PM1A216450021: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-562-5554
Utility Resilient Mount

145625554
530652-75: RNCC: 3 | RNVC: 2
FS0002000: RNCC: 6 | RNVC: 9

3 Nov 2009

5340-14-298-8606
Retaining Strap

142988606
173776: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-402-6493
Access Cover

144026493
167108: RNCC: 3 | RNVC: 2

19 Jul 1985

5340-14-518-5232
Mounting Bracket

145185232
0000777668: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-369-9734
Access Cover

143699734
P106019D: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-394-6430
Flush Catch Claw

143946430
79109641: RNCC: 3 | RNVC: 2
79109641: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-346-1743
Quick Release Pin

143461743
39620: RNCC: 3 | RNVC: 2
101672: RNCC: 5 | RNVC: 2

12 Dec 1977

5340-14-420-7014
Eye Hook

144207014
16744624: RNCC: 3 | RNVC: 2
16744624: RNCC: 5 | RNVC: 9

16 Dec 1987

5340-14-209-7305
Loop Clamp

142097305
C9573FI8: RNCC: 3 | RNVC: 2
2-06868: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-479-6058
Mounting Bracket

144796058
23626193-6: RNCC: 3 | RNVC: 2

24 Jan 1996

5340-14-545-7356
Mounting Plate

145457356
508.000.001: RNCC: 3 | RNVC: 9

3 May 2005

5340-14-522-1146
Access Cover

145221146
8194886: RNCC: 3 | RNVC: 2
8194886: RNCC: 5 | RNVC: 2

4 Oct 2000

5340-14-426-4699
Bumper

144264699
BFP00836: RNCC: 3 | RNVC: 2

1 Sep 1988

5340-14-457-1935
Access Cover

144571935
005056110100: RNCC: 3 | RNVC: 2

13 Aug 1992

5340-14-463-6130
Mounting Plate

144636130
22333521-1: RNCC: 3 | RNVC: 2

21 Jun 1993

5340-14-493-4545
Mounting Bracket

144934545
409775: RNCC: 3 | RNVC: 2
F300 0T 013 1035: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-455-1447
Key Blank

144551447
07794227: RNCC: 3 | RNVC: 2
07794227: RNCC: 5 | RNVC: 2
T3639900: RNCC: 5 | RNVC: 2

1 May 1992

5340-14-439-3709
Pawl Fastener

144393709
766: RNCC: 3 | RNVC: 9
BLOCT766CAMEA: RNCC: 5 | RNVC: 2

25 Apr 1990

5340-14-381-5230
Plug Button

143815230
0023555W: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-432-2054
Plug Button

144322054
X77638R1: RNCC: 3 | RNVC: 2

29 May 1989

5340-14-523-3162
Lock-Release Lever

145233162
CPR3B10233: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-325-5811
Angle Bracket

143255811
03256-63: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-438-8121
Protection Bellows

144388121
FA5303: RNCC: 3 | RNVC: 2
545065: RNCC: 5 | RNVC: 2

9 Apr 1990

5340-14-468-4527
Fusible Plug

144684527
94MS150: RNCC: 3 | RNVC: 2

3 Mar 1994

5340-14-503-9907
Bumper

145039907
BUTEE93778B00: RNCC: 3 | RNVC: 2
BUTEE93778A00: RNCC: 5 | RNVC: 9

4 Feb 1998

5340-14-462-9058
Mounting Bracket

144629058
2DM160661: RNCC: 3 | RNVC: 2
91714397: RNCC: 5 | RNVC: 2

5 May 1993

5340-14-406-0505
Support Hook

144060505
M4Z5180903420: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-439-6768
Mounting Bracket

144396768
16787588: RNCC: 3 | RNVC: 2
16787588: RNCC: 5 | RNVC: 9

16 May 1990

5340-14-312-0009
Strap Hinge

143120009
38411: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-432-9999
Angle Bracket

144329999
10270-241: RNCC: 3 | RNVC: 9
89408321: RNCC: 5 | RNVC: 2

5 Jul 1989

5340-14-472-6206
Angle Bracket

144726206
0264308930: RNCC: 3 | RNVC: 2

7 Nov 1994

5340-14-289-3318
Loop Clamp

142893318
CRPM: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-372-2894
Retaining Strap

143722894
142156201: RNCC: 3 | RNVC: 2
142156201: RNCC: 5 | RNVC: 2

1 Sep 1981

5340-14-503-2947
Mounting Bracket

145032947
2879011: RNCC: 3 | RNVC: 2

7 Jan 1998

Load More Results