What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 124 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 124 of 446

5340-14-533-1192
Mounting Plate

145331192
31102622: RNCC: 3 | RNVC: 2

23 Jan 2003

5340-14-379-8056
Access Cover

143798056
064E07-543637M: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-361-1243
Access Cover

143611243
16294014: RNCC: 3 | RNVC: 2
16294014: RNCC: 5 | RNVC: 9

24 Jan 1980

5340-14-506-8006
Rod End Clevis

145068006
T642A4010151: RNCC: 3 | RNVC: 2

20 May 1998

5340-14-430-3994
Access Cover

144303994
14400328F: RNCC: 3 | RNVC: 2

20 Mar 1989

5340-14-350-6965
Access Cover

143506965
15621567: RNCC: 3 | RNVC: 2
15621567: RNCC: 3 | RNVC: 9

12 Jul 1978

5340-14-375-2792
Anchor Strap

143752792
5000535779: RNCC: 3 | RNVC: 2
5000535779: RNCC: 5 | RNVC: 9

26 Feb 1982

5340-14-335-3589
Rod End Clevis

143353589
193256: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-522-5304
Mounting Bracket

145225304
501135G: RNCC: 3 | RNVC: 2

6 Nov 2000

5340-14-305-7227
Rod End Clevis

143057227
551692: RNCC: 3 | RNVC: 2
551692: RNCC: 5 | RNVC: 2
551692: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-533-7290
Mounting Bracket

145337290
10683456000: RNCC: 3 | RNVC: 2

19 Feb 2003

5340-14-538-0308
Utility Access Door

145380308
211772: RNCC: 3 | RNVC: 2

9 Dec 2003

5340-14-527-3471
Lock Bolt

145273471
19218855: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-410-5287
Angle Bracket

144105287
16954516: RNCC: 3 | RNVC: 9

2 Jul 1986

5340-14-505-7360
Loop Clamp

145057360
7703083384: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-509-1933
Butt Hinge

145091933
ER4166: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-459-8800
Leakproof Seal Plug

144598800
P721103A: RNCC: 3 | RNVC: 2

17 Dec 1992

5340-14-547-5235
Angle Bracket

145475235
RA1M702201091N1: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-472-5659
Mending Plate

144725659
S3849145: RNCC: 3 | RNVC: 2
849145: RNCC: 5 | RNVC: 9

3 Nov 1994

5340-14-530-2899
Safety Cable Kit

145302899
47136509: RNCC: 3 | RNVC: 2

29 May 2002

5340-14-549-0604
Angle Bracket

145490604
RA1M215160003N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-472-4542
Mounting Bracket

144724542
DXX1111: RNCC: 3 | RNVC: 2

26 Oct 1994

5340-14-503-8306
Loop Clamp

145038306
52113105010: RNCC: 3 | RNVC: 2
1153101000: RNCC: 5 | RNVC: 2
115G10: RNCC: 5 | RNVC: 2

30 Jan 1998

5340-14-312-4623
Door Handle

143124623
5294ALUPLASTIFIEGRIS: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-300-0491
Retaining Band

143000491
331243: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-042-5602
Bumper

140425602
211680: RNCC: 3 | RNVC: 2
FI211680: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-408-4783
Butt Hinge

144084783
16603417: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-505-8325
Mounting Bracket

145058325
45607233: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-478-7561
Mounting Plate

144787561
5010099442: RNCC: 3 | RNVC: 2

20 Nov 1995

5340-14-553-7883
Mounting Bracket

145537883
113 021: RNCC: 3 | RNVC: 2
113 021: RNCC: 3 | RNVC: 2

22 May 2007

5340-14-521-5685
Mounting Bracket

145215685
160-88947: RNCC: 3 | RNVC: 2

23 Aug 2000

5340-14-393-5519
Retaining Strap

143935519
970464: RNCC: 3 | RNVC: 2
970464: RNCC: 5 | RNVC: 9

7 Apr 1984

5340-14-358-4097
Flush Catch Claw

143584097
390054: RNCC: 3 | RNVC: 2
390054: RNCC: 6 | RNVC: 9

13 Aug 1979

5340-14-511-5862
Rod End Connector

145115862
D65447: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-546-7620
Mounting Bracket

145467620
RA1M703756741A2N1: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-14-514-0770
Pawl Fastener Set

145140770
PM1A005001N22: RNCC: 3 | RNVC: 2
PM1A005001N22: RNCC: 5 | RNVC: 2
MJCF: RNCC: 5 | RNVC: 9

22 Apr 1999

5340-14-474-7460
Bridge Clamp

144747460
39140363: RNCC: 3 | RNVC: 2

1 Mar 1995

5340-14-546-7691
Mounting Plate

145467691
RA1M706119151A1: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-14-531-3187
Mounting Bracket

145313187
47080488: RNCC: 3 | RNVC: 2

6 Aug 2002

5340-14-508-8034
Metal Grille

145088034
2.10076.0: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-14-403-9132
Mounting Plate

144039132
1501021: RNCC: 3 | RNVC: 2
1501021: RNCC: 5 | RNVC: 2

11 Sep 1985

5340-14-550-2010
Retaining Strap

145502010
712601: RNCC: 3 | RNVC: 2

8 Jun 2006

5340-14-483-0836
Mounting Bracket

144830836
203627: RNCC: 3 | RNVC: 2

8 Aug 1996

5340-14-479-5720
Mounting Plate

144795720
23221838-5: RNCC: 3 | RNVC: 2

24 Jan 1996

5340-14-032-0781
Quick Release Pin

140320781
051441: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-509-6771
Pipe Hanger

145096771
RA1M702202711: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-512-0262
Retaining Clip

145120262
0055426: RNCC: 3 | RNVC: 2

3 Feb 1999

5340-14-403-3438
Anchor Strap

144033438
95404528AW: RNCC: 3 | RNVC: 2
95404528DK: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-505-7338
Strap Fastener Loop

145057338
7700580192: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-410-6564
Access Cover

144106564
400278: RNCC: 3 | RNVC: 2
BGE400278: RNCC: 5 | RNVC: 2

9 Jul 1986

5340-14-551-9839
Mounting Bracket

145519839
82179445000: RNCC: 3 | RNVC: 2

15 Nov 2006

5340-14-455-9468
Synchro Clamp

144559468
PM1A761162270: RNCC: 3 | RNVC: 2
PM1A761162270: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-511-9077
Mounting Plate

145119077
46231438: RNCC: 3 | RNVC: 9
46231438: RNCC: 5 | RNVC: 2

28 Jan 1999

5340-14-541-1448
Loop Clamp

145411448
951260: RNCC: 3 | RNVC: 9
18561630-0: RNCC: 5 | RNVC: 2

14 May 2004

5340-14-550-9230
Angle Bracket

145509230
RA1B701776371: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-507-0881
Angle Bracket

145070881
10380584: RNCC: 3 | RNVC: 2

10 Jun 1998

5340-14-391-7764
Cover Strip

143917764
DA2C525092041: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-513-8056
Mounting Bracket

145138056
DE21796: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-551-3500
Angle Bracket

145513500
RA1M704116081N1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-389-0507
Mounting Bracket

143890507
748122: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-523-1166
Mounting Bracket

145231166
409789: RNCC: 3 | RNVC: 2

4 Jan 2001

5340-14-531-2546
Loop Clamp

145312546
52313113030: RNCC: 3 | RNVC: 2

6 Aug 2002

5340-14-523-2558
Pipe Hanger

145232558
RA1M702856121A2: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-407-3893
Strap End Clip

144073893
33862: RNCC: 3 | RNVC: 2

12 Feb 1986

5340-14-549-9480
Mounting Bracket

145499480
2092139: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-518-7025
Bridge Clamp

145187025
5000719629: RNCC: 3 | RNVC: 2

15 Feb 2000

5340-14-351-5501
Mending Plate

143515501
0113: RNCC: 3 | RNVC: 2

12 Sep 1978

5340-14-552-1726
Bail Handle

145521726
P0.300.PN: RNCC: 3 | RNVC: 2
252417924: RNCC: 3 | RNVC: 2
3000206772: RNCC: 5 | RNVC: 1

29 Nov 2006

5340-14-455-4222
Mounting Bracket

144554222
45214363: RNCC: 3 | RNVC: 2
45214363: RNCC: 5 | RNVC: 9

21 May 1992

5340-14-518-6731
Metal Grille

145186731
30118: RNCC: 3 | RNVC: 2

11 Feb 2000

5340-14-470-3207
Bow Handle

144703207
SZ2450: RNCC: 3 | RNVC: 2
SZ2450: RNCC: 3 | RNVC: 2
91712301: RNCC: 5 | RNVC: 2

15 Jun 1994

5340-14-466-8460
Angle Bracket

144668460
5000416992: RNCC: 3 | RNVC: 2
TID24353: RNCC: 5 | RNVC: 2

3 Dec 1993

5340-14-486-3442
Angle Bracket

144863442
PA01PD040005: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-383-5157
Loop Clamp

143835157
20189131: RNCC: 3 | RNVC: 2
20189131: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-542-2958
Shelf Bracket

145422958
970928908: RNCC: 3 | RNVC: 2
970928908: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-413-8808
Loop Clamp

144138808
ST406M63P60: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-471-7268
Mounting Plate

144717268
2017901K: RNCC: 3 | RNVC: 2

14 Sep 1994

5340-14-506-2972
Angle Bracket

145062972
38661049: RNCC: 3 | RNVC: 2
38661049: RNCC: 5 | RNVC: 9

22 Apr 1998

5340-14-449-7448
Mounting Bracket

144497448
38001827: RNCC: 3 | RNVC: 2
38001827: RNCC: 5 | RNVC: 9

4 Sep 1991

5340-14-480-9249
Corner Brace

144809249
3BM00644AAAA: RNCC: 3 | RNVC: 2
3BM00644AAAA: RNCC: 5 | RNVC: 9

11 Apr 1996

5340-14-299-2660
Loop Clamp

142992660
56554: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-461-9051
Section Block Clamp

144619051
T700A3010004104: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-339-3060
Loop Clamp

143393060
141100N1: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-323-6706
Loop Clamp

143236706
8TF200BS: RNCC: 3 | RNVC: 2
HB8TF200BS: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-544-2666
Mounting Plate

145442666
S521A1051290: RNCC: 3 | RNVC: 2

14 Jan 2005

5340-14-549-8476
Mounting Bracket

145498476
F1262544: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-501-6013
Loop Clamp

145016013
45594946: RNCC: 3 | RNVC: 2
45594946: RNCC: 5 | RNVC: 9
F300 0T 025 0280: RNCC: 6 | RNVC: 9

5 Nov 1997

5340-14-396-2999
Tubular Fairlead

143962999
4771520880: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-416-0451
Retaining Strap

144160451
BJM01530: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-277-7840
Retaining Band

142777840
502P473: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-509-6511
Cover Strip

145096511
RA1M116090041N1: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-371-6329
Retaining Strap

143716329
MBEU61910: RNCC: 3 | RNVC: 2
034809: RNCC: 5 | RNVC: 2

5 Aug 1981

5340-14-410-7327
Mounting Plate

144107327
1838N8: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-266-4571
Angle Bracket

142664571
450630: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-545-8443
Mounting Bracket

145458443
1001675: RNCC: 3 | RNVC: 2

19 May 2005

5340-14-432-3788
Mounting Bracket

144323788
540647: RNCC: 3 | RNVC: 2
00540647: RNCC: 5 | RNVC: 2

7 Jun 1989

5340-14-403-3994
Webbing Strap

144033994
DAEB231: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-533-1755
Webbing Strap

145331755
ST80ETS: RNCC: 3 | RNVC: 2

28 Jan 2003

5340-14-482-6987
Vent Plug

144826987
201T163: RNCC: 3 | RNVC: 2
201T163: RNCC: 5 | RNVC: 2

23 Jul 1996

5340-14-366-9350
Angle Bracket

143669350
003279080P: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-400-8386
Bumper

144008386
13457-2647: RNCC: 3 | RNVC: 2
91265363: RNCC: 5 | RNVC: 2

21 May 1985

5340-14-553-3259
Runner

145533259
82360885000: RNCC: 3 | RNVC: 2

24 Mar 2007

5340-14-326-4315
Bumper

143264315
573895194: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-470-0250
Angle Bracket

144700250
10024145: RNCC: 3 | RNVC: 2

25 May 1994

5340-14-466-1747
Retaining Strap

144661747
201814: RNCC: 3 | RNVC: 2
89170657: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-462-7380
Rod End Clevis

144627380
PM1A725374353: RNCC: 3 | RNVC: 2
PM1A725374353: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-14-417-0524
Anchor Strap

144170524
412902120014: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-14-392-6998
Access Cover

143926998
0007008742: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-422-4482
Rod End Clevis

144224482
172906: RNCC: 3 | RNVC: 2

3 Mar 1988

5340-14-488-4214
Angle Bracket

144884214
2214011: RNCC: 3 | RNVC: 2
2214011: RNCC: 5 | RNVC: 2

7 May 1997

5340-14-485-4236
Access Cover

144854236
38427449: RNCC: 3 | RNVC: 2

23 Jan 1997

5340-14-447-6415
Anchor Strap

144476415
5000919520: RNCC: 3 | RNVC: 2

29 May 1991

5340-14-550-4114
Mounting Bracket

145504114
2714229700: RNCC: 3 | RNVC: 2

19 Jun 2006

5340-14-376-4525
Angle Bracket

143764525
16294908: RNCC: 3 | RNVC: 2
16294908: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-528-8757
Mounting Plate

145288757
TS140437: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-14-512-5989
Mounting Bracket

145125989
201650: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-523-2929
Angle Bracket

145232929
RA1M702446065N1: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-519-3547
Threaded Rod End

145193547
C632A2165201: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-463-3971
Mounting Plate

144633971
96100.A2.032: RNCC: 3 | RNVC: 2
89295640: RNCC: 5 | RNVC: 2

9 Jun 1993

5340-14-472-3741
Pipe Hanger

144723741
PM1A522114001: RNCC: 3 | RNVC: 2
PM1A522114001: RNCC: 5 | RNVC: 2

19 Oct 1994

5340-14-404-7499
Angle Bracket

144047499
29736868: RNCC: 3 | RNVC: 2
29736868: RNCC: 5 | RNVC: 9

20 Nov 1985

5340-14-552-4729
Block Clamp

145524729
S881A9601243: RNCC: 3 | RNVC: 2

8 Jan 2007

5340-14-042-9101
Angle Bracket

140429101
A21A221260130: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-483-5988
Butt Hinge

144835988
10136473: RNCC: 3 | RNVC: 2

19 Sep 1996

5340-14-443-8744
Loop Clamp

144438744
51120605020: RNCC: 3 | RNVC: 2
240692000: RNCC: 5 | RNVC: 2
24FE20: RNCC: 5 | RNVC: 9

11 Dec 1990

5340-14-524-1968
Access Cover

145241968
10509081: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-528-5005
Mounting Plate

145285005
MB4524F00: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-484-3836
Retaining Strap

144843836
992354: RNCC: 3 | RNVC: 2
992354: RNCC: 5 | RNVC: 9

14 Nov 1996

5340-14-509-1048
Angle Bracket

145091048
JVJT180100: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-402-0561
Bumper

144020561
613068: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-390-6834
Compression Cup

143906834
26010002800: RNCC: 3 | RNVC: 2
260100028: RNCC: 5 | RNVC: 2
26.010.002800: RNCC: 5 | RNVC: 2
260100028: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-14-505-0498
Mounting Plate

145050498
0000235844: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-392-4415
Handwheel

143924415
B4A040011: RNCC: 3 | RNVC: 9

21 Mar 1984

5340-14-554-8842
Loop Clamp

145548842
78651RH10CP: RNCC: 1 | RNVC: 2
78651RH10CP: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-535-7594
Mounting Bracket

145357594
T943A2001114: RNCC: 3 | RNVC: 2

25 Jun 2003

5340-14-566-6959
Utility Resilient Mount

145666959
93930629: RNCC: 3 | RNVC: 2

7 Dec 2010

5340-14-541-6970
Angle Bracket

145416970
F1264514: RNCC: 3 | RNVC: 2

18 Jun 2004

5340-14-290-8751
Mounting Plate

142908751
1-1088-FA0301: RNCC: 3 | RNVC: 2
1-1088FA03-01: RNCC: 5 | RNVC: 2
1-1088FA03-01: RNCC: 5 | RNVC: 9
1-1088FA03-01: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-444-5931
Angle Bracket

144445931
330A58-1300-199: RNCC: 3 | RNVC: 2

16 Jan 1991

5340-14-310-4606
Retaining Strap

143104606
A10-73-123-00-0M1: RNCC: 3 | RNVC: 2
A10-73-123-00-0M1: RNCC: 3 | RNVC: 2
85-645-0660: RNCC: 6 | RNVC: 9

1 Jan 1974

5340-14-396-0186
Loop Clamp

143960186
301207-05630: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-043-0998
Angle Bracket

140430998
365A75-2363-23: RNCC: 3 | RNVC: 2

10 Apr 1984

5340-14-402-6508
Rim Lock

144026508
9138-26: RNCC: 3 | RNVC: 2
9251322380: RNCC: 5 | RNVC: 2

19 Jul 1985

5340-14-411-0050
Quick Release Pin

144110050
376-210-01: RNCC: 3 | RNVC: 2
85-693-3174: RNCC: 6 | RNVC: 9

28 Jul 1986

5340-14-343-6662
Runner

143436662
16397936: RNCC: 3 | RNVC: 2
16397936: RNCC: 3 | RNVC: 9

13 Jul 1977

5340-14-485-6779
Handwheel

144856779
MM4601: RNCC: 3 | RNVC: 2

6 Feb 1997

5340-14-523-8138
Mounting Plate

145238138
45461576: RNCC: 3 | RNVC: 2

2 Feb 2001

5340-14-488-5792
Runner

144885792
GLISS92732X00: RNCC: 3 | RNVC: 2

21 May 1997

5340-14-291-7783
Mounting Plate

142917783
107921: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-523-2447
Loop Clamp

145232447
RA1M701556560: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-427-8705
Detent Plunger

144278705
111215: RNCC: 3 | RNVC: 2

17 Nov 1988

5340-14-358-7154
Detent Plunger

143587154
8811510006: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-286-3609
Angle Bracket

142863609
0264700170: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-504-4707
Mounting Bracket

145044707
TR95214: RNCC: 3 | RNVC: 2

18 Feb 1998

5340-14-259-7071
Mending Plate

142597071
711316: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-545-2630
Mounting Bracket

145452630
S214A4012106: RNCC: 3 | RNVC: 2

30 Mar 2005

5340-14-403-4584
Bumper

144034584
00019601: RNCC: 3 | RNVC: 9
19601: RNCC: 5 | RNVC: 9

21 Aug 1985

5340-14-274-3666
Mounting Plate

142743666
166670: RNCC: 3 | RNVC: 2
166670: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-480-2142
Retaining Strap

144802142
23.44454PG: RNCC: 3 | RNVC: 2

28 Feb 1996

5340-14-506-8711
Retaining Clip

145068711
053726: RNCC: 3 | RNVC: 9

27 May 1998

5340-14-457-7562
Mounting Bracket

144577562
71193: RNCC: 3 | RNVC: 2

17 Sep 1992

5340-14-438-8752
Loop Clamp

144388752
005062010045: RNCC: 3 | RNVC: 2
0049176: RNCC: 5 | RNVC: 2

10 Apr 1990

5340-14-314-6402
Loop Clamp

143146402
0098517020: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-424-8146
Retaining Strap

144248146
567621: RNCC: 3 | RNVC: 2

9 Jun 1988

5340-14-309-3082
Angle Bracket

143093082
0249967130: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-363-7880
Retaining Strap

143637880
16008476: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-351-5659
Control Rod

143515659
525661: RNCC: 3 | RNVC: 2

12 Sep 1978

5340-14-396-5812
Angle Bracket

143965812
640323: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-529-6017
Mounting Bracket

145296017
F00072397: RNCC: 3 | RNVC: 2

2 Apr 2002

5340-14-519-3466
Loop Clamp

145193466
C321A2116201: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-331-0684
Bumper

143310684
BAZ2519: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-351-5938
Lock-Release Lever

143515938
487273U: RNCC: 3 | RNVC: 2

12 Sep 1978

5340-14-465-2742
Mounting Bracket

144652742
365A08-4320-7951: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-520-0175
Mounting Plate

145200175
10595758: RNCC: 3 | RNVC: 2

3 May 2000

5340-14-382-9576
Retaining Strap

143829576
BAZ7947: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-535-5947
Mounting Bracket

145355947
46061984: RNCC: 3 | RNVC: 2
46061984: RNCC: 5 | RNVC: 9

4 Jun 2003

5340-14-412-9714
Bumper

144129714
3680351619: RNCC: 3 | RNVC: 9

5 Nov 1986

5340-14-545-2642
Mounting Bracket

145452642
S215A3014204: RNCC: 3 | RNVC: 2

30 Mar 2005

5340-14-505-7307
Loop Clamp

145057307
51314410103: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-437-4237
Mounting Plate

144374237
3005020: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-546-6271
Angle Bracket

145466271
RA1M706216221: RNCC: 3 | RNVC: 2

21 Jul 2005

5340-14-435-4509
Clamp Bolt Assembly

144354509
DA2C201104509: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-14-526-1630
Shimmy Damper

145261630
39559774: RNCC: 3 | RNVC: 2

4 Jul 2001

5340-14-385-5670
Strap Hinge

143855670
CR0Q2BECNC0QUE: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-554-9410
Loop Clamp

145549410
78651DH12BF: RNCC: 1 | RNVC: 2
78651DH12BF: RNCC: 3 | RNVC: 2

11 Sep 2007

5340-14-520-3563
Bow Handle

145203563
1130201: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-520-1677
Mounting Bracket

145201677
20857451: RNCC: 3 | RNVC: 2
20857451: RNCC: 3 | RNVC: 9

17 May 2000

5340-14-452-9880
Blank Panel

144529880
127997: RNCC: 3 | RNVC: 2

29 Jan 1992

5340-14-547-4359
Loop Clamp

145474359
5010610343: RNCC: 3 | RNVC: 2

13 Oct 2005

5340-14-346-1950
Bumper

143461950
ZC9427041U: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-500-1044
Mounting Plate

145001044
1660770M1: RNCC: 3 | RNVC: 2
F300 0T 024 1056: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-349-2375
Lock-Release Lever

143492375
173230: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-551-2694
Angle Bracket

145512694
RA1A702416117: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-502-3055
Access Cover

145023055
016056005: RNCC: 3 | RNVC: 2

9 Dec 1997

5340-14-445-5023
Mounting Bracket

144455023
ST406M52P196E11: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-14-526-9695
Access Hole Frame

145269695
10489051: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-479-3413
Access Cover

144793413
0847171Y00: RNCC: 3 | RNVC: 2

10 Jan 1996

5340-14-451-4826
Access Cover

144514826
39064752: RNCC: 3 | RNVC: 2

21 Nov 1991

5340-14-442-4039
Access Cover

144424039
20128764: RNCC: 3 | RNVC: 2
20128764: RNCC: 3 | RNVC: 9

16 Oct 1990

5340-14-449-5991
Access Cover

144495991
39148793: RNCC: 3 | RNVC: 2

28 Aug 1991

5340-14-382-2242
Access Cover

143822242
2474-35: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-382-6039
Access Cover

143826039
16497222: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-460-5541
Rod End Clevis

144605541
405040: RNCC: 3 | RNVC: 2
405040: RNCC: 5 | RNVC: 9

29 Jan 1993

5340-14-515-6080
Access Cover

145156080
JS110138: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-437-8214
Anchor Strap

144378214
5000606677: RNCC: 3 | RNVC: 2

21 Feb 1990

5340-14-504-3508
Access Cover

145043508
747464M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-520-9029
Access Cover

145209029
10444947: RNCC: 3 | RNVC: 2

21 Jun 2000

5340-14-550-3418
Access Cover

145503418
2716234280: RNCC: 3 | RNVC: 2

16 Jun 2006

5340-14-399-1208
Anchor Strap

143991208
5000730077: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-515-9283
Utility Access Door

145159283
17008: RNCC: 3 | RNVC: 2

26 Aug 1999

5340-14-555-5546
Access Cover

145555546
10659537001: RNCC: 3 | RNVC: 2

27 Nov 2007

5340-14-371-4142
Access Cover

143714142
26250878: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-369-0605
Mending Plate

143690605
5759P: RNCC: 3 | RNVC: 9
5759: RNCC: 5 | RNVC: 9
5759: RNCC: 5 | RNVC: 9

17 Apr 1981

5340-14-417-0170
Retaining Strap

144170170
15170219: RNCC: 3 | RNVC: 2
15170219: RNCC: 5 | RNVC: 9

25 Jun 1987

5340-14-423-0470
Angle Bracket

144230470
721100102: RNCC: 3 | RNVC: 2
89174148: RNCC: 5 | RNVC: 2
721100102: RNCC: 5 | RNVC: 9

31 Mar 1988

5340-14-507-9581
Bumper

145079581
553807: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-482-1115
Access Cover

144821115
38756863: RNCC: 3 | RNVC: 2
38756863: RNCC: 5 | RNVC: 9

20 Jun 1996

5340-14-528-8698
Access Cover

145288698
GA024647Y01: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-14-516-7383
Loop Clamp

145167383
Y00005744: RNCC: 3 | RNVC: 2
Y00005744: RNCC: 5 | RNVC: 9

13 Oct 1999

5340-14-480-8359
Access Cover

144808359
10024162: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-14-202-3825
Access Cover

142023825
0000112173: RNCC: 3 | RNVC: 2
ZB9112173A: RNCC: 5 | RNVC: 2
0000112173: RNCC: 5 | RNVC: 9
112173: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-14-480-4870
Access Cover

144804870
GFCAA07: RNCC: 3 | RNVC: 2
F0025450: RNCC: 5 | RNVC: 9

14 Mar 1996

5340-14-481-3728
Access Hole Frame

144813728
066011J: RNCC: 3 | RNVC: 2
066011J: RNCC: 5 | RNVC: 2

1 May 1996

5340-14-473-9571
Access Cover

144739571
7700653427: RNCC: 3 | RNVC: 2

18 Jan 1995

5340-14-460-8044
Access Cover

144608044
19307657: RNCC: 3 | RNVC: 2
19307657: RNCC: 5 | RNVC: 2

10 Feb 1993

5340-14-338-8066
Anchor Strap

143388066
185048: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-541-4658
Utility Access Door

145414658
1SH41764641: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-383-0075
Anchor Strap

143830075
4770215640: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-551-3141
Protection Bellows

145513141
FRA501507A: RNCC: 3 | RNVC: 2
FRA501507A: RNCC: 5 | RNVC: 2

11 Sep 2006

5340-14-451-2323
Pipe Hanger

144512323
PM1A729009690: RNCC: 3 | RNVC: 2
PM1A729009690: RNCC: 5 | RNVC: 2

6 Nov 1991

5340-14-551-3570
Angle Bracket

145513570
RA1A702606023: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-458-8694
Mounting Plate

144588694
45680267: RNCC: 3 | RNVC: 2

5 Nov 1992

5340-14-360-6372
Expansion Plug

143606372
0000146980: RNCC: 3 | RNVC: 2
0000146980: RNCC: 5 | RNVC: 9
146980: RNCC: 5 | RNVC: 9

19 Dec 1979

5340-14-571-9003
Utility Access Door

145719003
G2557711800000: RNCC: 3 | RNVC: 2
G2557711800000: RNCC: 5 | RNVC: 2

23 May 2012

5340-14-318-0649
Support Hook

143180649
0235287030: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-517-0538
Access Cover

145170538
56501166: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-341-1278
Anchor Strap

143411278
002495050P: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-263-4178
Retaining Strap

142634178
R404252: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-305-3379
Hook Handle

143053379
26242057: RNCC: 3 | RNVC: 2
C242057: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-454-0500
Mounting Plate

144540500
45594206: RNCC: 3 | RNVC: 2
45594206: RNCC: 5 | RNVC: 9

19 Mar 1992

5340-14-350-7256
Synchro Clamp

143507256
0211290601: RNCC: 3 | RNVC: 2
0211290601: RNCC: 5 | RNVC: 2

12 Jul 1978

5340-14-343-6809
Loop Clamp

143436809
ST406M52P597: RNCC: 3 | RNVC: 2

13 Jul 1977

5340-14-401-6940
Loop Clamp

144016940
3-2633-02-50E: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-365-7637
Snap Hook

143657637
A2000-17: RNCC: 3 | RNVC: 9

8 Oct 1980

5340-14-330-0667
Loop Clamp

143300667
620-854-655-0: RNCC: 3 | RNVC: 2
620-854-655-0: RNCC: 5 | RNVC: 2
85-688-8964: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-497-8884
Protection Bellows

144978884
B9999-30-35: RNCC: 3 | RNVC: 2

22 Oct 1997

5340-14-204-7765
Loop Clamp

142047765
675-212-165-0: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-410-0767
Loop Clamp

144100767
61100001032: RNCC: 3 | RNVC: 2
HB245N32: RNCC: 5 | RNVC: 2
85-693-2913: RNCC: 6 | RNVC: 9

4 Jun 1986

5340-14-374-0903
Angle Bracket

143740903
304-009-401-0: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-481-3278
Mounting Plate

144813278
23241529-9: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-291-1479
Belt-Strap Keeper

142911479
25L0URDNICKELE: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-032-0780
Quick Release Pin

140320780
051438: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-361-6306
Pipe Hanger

143616306
000280: RNCC: 3 | RNVC: 2
53911-4: RNCC: 3 | RNVC: 2
28: RNCC: 5 | RNVC: 2
000280: RNCC: 5 | RNVC: 2

20 Feb 1980

5340-14-535-8449
Mounting Bracket

145358449
12191-7: RNCC: 3 | RNVC: 2

25 Jun 2003

5340-14-459-8779
Bow Handle

144598779
P607842: RNCC: 3 | RNVC: 2

17 Dec 1992

5340-14-471-1184
Mounting Bracket

144711184
45180295: RNCC: 3 | RNVC: 2
45180295: RNCC: 5 | RNVC: 9

27 Jul 1994

5340-14-446-1105
Synchro Clamp

144461105
ST406M63P12E22: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-415-5435
Clamping Catch

144155435
701400001220: RNCC: 3 | RNVC: 2

18 May 1987

5340-14-532-0387
Mounting Bracket

145320387
0RK36300: RNCC: 3 | RNVC: 2
0RK36300: RNCC: 5 | RNVC: 9

9 Oct 2002

5340-14-474-4209
Loop Clamp

144744209
14288: RNCC: 3 | RNVC: 2

15 Feb 1995

5340-14-516-4282
Mounting Bracket

145164282
TA5096P002: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-14-502-5224
Protection Bellows

145025224
5000677076: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-514-7642
Butt Hinge

145147642
152533: RNCC: 3 | RNVC: 2

16 Jun 1999

5340-14-544-0519
Mounting Plate

145440519
AMPC GENE E227309: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-14-502-5638
Bow Handle

145025638
5000823917: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-368-5295
Retaining Strap

143685295
TEM332030002: RNCC: 3 | RNVC: 2
TEM332030002: RNCC: 5 | RNVC: 2

20 Feb 1981

5340-14-224-4612
Retaining Strap

142244612
3623: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-436-3264
Angle Bracket

144363264
4167750: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-14-373-8723
Mounting Plate

143738723
255473: RNCC: 3 | RNVC: 2
255473: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-14-366-9576
Bumper

143669576
19A5018: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-426-1254
Mounting Plate

144261254
39529218: RNCC: 3 | RNVC: 2
39529218: RNCC: 5 | RNVC: 9

4 Aug 1988

5340-14-392-7089
Tubular Fairlead

143927089
1104888200: RNCC: 3 | RNVC: 2
48882: RNCC: 5 | RNVC: 2

7 Apr 1984

5340-14-507-8524
Retaining Strap

145078524
47136588: RNCC: 3 | RNVC: 2

20 Aug 1998

5340-14-414-2027
Retaining Strap

144142027
254331: RNCC: 3 | RNVC: 2
254331: RNCC: 5 | RNVC: 9

22 Jan 1987

5340-14-453-8569
Angle Bracket

144538569
PAL01PD000022: RNCC: 3 | RNVC: 9

12 Mar 1992

5340-14-445-1644
Retaining Strap

144451644
533901: RNCC: 3 | RNVC: 2

4 Feb 1991

5340-14-283-5622
Retaining Strap

142835622
100680: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-394-7120
Butt Hinge

143947120
AL40: RNCC: 3 | RNVC: 2

28 Aug 1984

5340-14-558-9930
Utility Access Door

145589930
82175586004: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-14-364-2599
Leaf Spring

143642599
0165-103-700: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-507-6636
Loop Clamp

145076636
11317009008: RNCC: 3 | RNVC: 2
435637: RNCC: 5 | RNVC: 9

11 Aug 1998

5340-14-439-1868
Rim Lock

144391868
16212627: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-458-6840
Mounting Bracket

144586840
T942AA25: RNCC: 3 | RNVC: 2
5046580: RNCC: 5 | RNVC: 9
T942AA25: RNCC: 5 | RNVC: 9

29 Oct 1992

5340-14-551-8214
Mounting Plate

145518214
3BM05842AAAA: RNCC: 3 | RNVC: 2

26 Oct 2006

5340-14-551-2633
Mounting Bracket

145512633
RA1A703156125: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-394-6379
Angle Bracket

143946379
79098847: RNCC: 3 | RNVC: 2
79098847: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-322-0818
Angle Bracket

143220818
55707: RNCC: 3 | RNVC: 2
VDP7159: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-552-8479
Mounting Plate

145528479
MECA01331: RNCC: 3 | RNVC: 2

7 Feb 2007

5340-14-513-8768
Mounting Bracket

145138768
648282: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-545-9618
Mounting Bracket

145459618
DLT119211: RNCC: 3 | RNVC: 2

31 May 2005

5340-14-321-3495
Loop Clamp

143213495
0243877720: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-487-4940
Mounting Bracket

144874940
10183254: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-332-8701
Bow Handle

143328701
26244373: RNCC: 3 | RNVC: 2
C244373: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-373-5400
Angle Bracket

143735400
A11A232760001A1: RNCC: 3 | RNVC: 2

21 Oct 1981

5340-14-322-3034
Threaded Rod End

143223034
400077: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-528-8642
Mounting Bracket

145288642
P675860: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-14-520-8820
Mounting Plate

145208820
BRIDE01527X00: RNCC: 3 | RNVC: 2

21 Jun 2000

5340-14-535-0481
Bridge Clamp

145350481
T947A1001201: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-14-436-8635
Section Block Clamp

144368635
DA2C203638002: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-265-6909
Angle Bracket

142656909
153712: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-545-1230
Handwheel

145451230
3116019: RNCC: 3 | RNVC: 2
5118010022: RNCC: 5 | RNVC: 2
8043526M00: RNCC: 5 | RNVC: 2

18 Mar 2005

5340-14-430-5217
Butt Hinge

144305217
PM1A127132012: RNCC: 3 | RNVC: 2
PM1A127132012: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-438-0184
Butt Hinge

144380184
211200011: RNCC: 3 | RNVC: 9

6 Mar 1990

5340-14-296-2872
Loop Clamp

142962872
0257851000: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-520-0165
Mounting Bracket

145200165
10570021: RNCC: 3 | RNVC: 2

3 May 2000

5340-14-497-6629
Mounting Plate

144976629
6K1395: RNCC: 3 | RNVC: 2
F300 0T 023 4675: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-542-3489
Angle Bracket

145423489
10665146000: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-14-429-5827
Corner Brace

144295827
154323: RNCC: 3 | RNVC: 2

1 Feb 1989

5340-14-470-3265
Access Cover

144703265
202939: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-14-440-9369
Rod End Clevis

144409369
061234670: RNCC: 3 | RNVC: 9
234670: RNCC: 5 | RNVC: 9

8 Aug 1990

5340-14-406-1405
Anchor Strap

144061405
61638: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-366-4603
Threaded Rod End

143664603
132271X: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-366-4635
Anchor Strap

143664635
BBZ2104: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-396-1962
Anchor Strap

143961962
5503399: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-300-3340
Runner

143003340
15143874: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-344-5896
Locking Stay

143445896
24553: RNCC: 3 | RNVC: 2

9 Sep 1977

5340-14-344-2918
Quick Release Pin

143442918
NO PRIMARY REF14-344-2918: RNCC: 3 | RNVC: 2
252S20: RNCC: 5 | RNVC: 9

10 Aug 1977

5340-14-244-7641
Mending Plate

142447641
BZ1-273: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-457-7701
Pipe Hanger

144577701
402230A-SG10137-Z2CND17-12: RNCC: 3 | RNVC: 2

17 Sep 1992

5340-14-228-7814
Bumper

142287814
512510: RNCC: 3 | RNVC: 2
5166-06: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-301-0176
Angle Bracket

143010176
121E71-313-03-2: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-444-6404
Butt Hinge

144446404
72-1-3316: RNCC: 3 | RNVC: 2

16 Jan 1991

5340-14-043-1232
Loop Clamp

140431232
065T10-623867C: RNCC: 3 | RNVC: 2
064T10-623867C: RNCC: 5 | RNVC: 2

10 Apr 1984

5340-14-481-3239
Access Cover

144813239
23214409-3: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-299-9861
Buckle

142999861
11629-028: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-532-3118
Rod End Clevis

145323118
1-94420: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-318-5700
Rod End Clevis

143185700
103-36-74-1: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-350-7037
Mortise Lock Set

143507037
6380DROITEFLASQUESINOX: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-436-2022
Mounting Bracket

144362022
DA2C228534131: RNCC: 3 | RNVC: 2

6 Dec 1989

5340-14-485-1236
Pawl Fastener

144851236
1000-U155: RNCC: 3 | RNVC: 2

10 Jan 1997

5340-14-460-2323
Flush Catch Claw

144602323
GES700: RNCC: 3 | RNVC: 2

18 Jan 1993

5340-14-531-2568
Loop Clamp

145312568
52300010012: RNCC: 3 | RNVC: 2

6 Aug 2002

5340-14-488-6731
Mounting Bracket

144886731
3BT02183AAAA: RNCC: 3 | RNVC: 2
3BT02183AAAA: RNCC: 5 | RNVC: 9

28 May 1997

5340-14-465-7693
Loop Clamp

144657693
51311905036: RNCC: 3 | RNVC: 2
211903600: RNCC: 5 | RNVC: 2
21P36: RNCC: 5 | RNVC: 2
Z00.N7141382136: RNCC: 5 | RNVC: 2

14 Oct 1993

5340-14-548-1056
Angle Bracket

145481056
RA1A702336345: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-445-0569
Mounting Bracket

144450569
71471: RNCC: 3 | RNVC: 2

31 Jan 1991

5340-14-542-2596
Mounting Bracket

145422596
704221308: RNCC: 3 | RNVC: 2
704221308: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-500-7465
Section Block Clamp

145007465
E64009998221: RNCC: 3 | RNVC: 2
F300 0T 024 7662: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-469-3929
Angle Bracket

144693929
10027731: RNCC: 3 | RNVC: 2

20 Apr 1994

5340-14-480-6288
Angle Bracket

144806288
2022116: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-554-3807
Mounting Bracket

145543807
16592898: RNCC: 3 | RNVC: 2

27 Jun 2007

5340-14-434-1890
Webbing Strap

144341890
564482: RNCC: 3 | RNVC: 2

12 Sep 1989

5340-14-342-4996
Retaining Strap

143424996
530403: RNCC: 3 | RNVC: 2

16 May 1977

5340-14-365-4161
Angle Bracket

143654161
19414440: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-448-0543
Loop Holder

144480543
531B200200: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-14-336-7178
Lock-Release Lever

143367178
5000071540: RNCC: 3 | RNVC: 2
5000071540: RNCC: 5 | RNVC: 9

7 Oct 1976

5340-14-481-2121
Loop Clamp

144812121
31 31 47: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-14-429-2407
Pipe Hanger

144292407
553046: RNCC: 3 | RNVC: 2
553046: RNCC: 5 | RNVC: 2

11 Jan 1989

5340-14-375-2774
Anchor Strap

143752774
5000014985: RNCC: 3 | RNVC: 2
5000014985: RNCC: 5 | RNVC: 9

26 Feb 1982

5340-14-218-5273
Loop Clamp

142185273
15913131: RNCC: 3 | RNVC: 2
C9573FI22: RNCC: 5 | RNVC: 2

1 Jan 1965

5340-14-511-6687
Mounting Bracket

145116687
10259209: RNCC: 3 | RNVC: 2

8 Jan 1999

5340-14-462-6677
Plate Spacer

144626677
71221: RNCC: 3 | RNVC: 2
65222: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-14-375-6980
Retaining Strap

143756980
485543: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-516-6812
Mounting Bracket

145166812
46944826: RNCC: 3 | RNVC: 2

12 Oct 1999

5340-14-554-3258
Mounting Plate

145543258
82119273000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-526-9637
Detent Plunger

145269637
10514218: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-508-1554
Cable Retractor

145081554
8900000306: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-440-6394
Shelf Bracket

144406394
16130640: RNCC: 3 | RNVC: 2

18 Jul 1990

5340-14-210-0847
Mending Plate

142100847
A46190: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-359-2410
Angle Bracket

143592410
EA1M383: RNCC: 3 | RNVC: 2

2 Oct 1979

5340-14-546-0466
Mounting Plate

145460466
82131622000: RNCC: 3 | RNVC: 2

8 Jun 2005

5340-14-551-3106
Mounting Plate

145513106
1502017-CFRA: RNCC: 3 | RNVC: 2
1502017-CFRA: RNCC: 5 | RNVC: 2

11 Sep 2006

5340-14-381-5409
Strap Hinge

143815409
CC409BR: RNCC: 3 | RNVC: 2
MAF0001005110: RNCC: 6 | RNVC: 9

25 Jan 1983

5340-14-516-8058
Mounting Bracket

145168058
5001008894: RNCC: 3 | RNVC: 2

18 Oct 1999

5340-14-551-2890
Angle Bracket

145512890
RA1M701810131N1: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-387-2455
Retaining Strap

143872455
398841: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-14-456-5884
Angle Bracket

144565884
T551AD12: RNCC: 3 | RNVC: 2
5045917: RNCC: 5 | RNVC: 9
T551AD12: RNCC: 5 | RNVC: 9

9 Jul 1992

5340-14-502-5621
Spring Holder

145025621
5000822663: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-466-3116
Snap Hook

144663116
2482: RNCC: 3 | RNVC: 2
MQIV2482: RNCC: 5 | RNVC: 2

3 Nov 1993

5340-14-365-5596
Pipe Hanger

143655596
A11A522320060: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-358-5403
Butt Hinge

143585403
114003401: RNCC: 3 | RNVC: 2
114003401: RNCC: 5 | RNVC: 2

7 Sep 1979

5340-14-549-9282
Angle Bracket

145499282
2092547: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-375-1047
Snap Hook

143751047
42: RNCC: 3 | RNVC: 2

30 Jan 1982

5340-14-479-4655
Mounting Bracket

144794655
403D454: RNCC: 3 | RNVC: 2
403D454: RNCC: 5 | RNVC: 9

15 Jan 1996

5340-14-434-9080
Loop Clamp

144349080
415279: RNCC: 3 | RNVC: 2

9 Oct 1989

5340-14-320-1453
Access Cover

143201453
103-40-136-1: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-524-7518
Mounting Bracket

145247518
21231588-00: RNCC: 3 | RNVC: 2
21231588-8: RNCC: 5 | RNVC: 2

11 Apr 2001

5340-14-471-2506
Angle Bracket

144712506
121B76-701-07-0: RNCC: 3 | RNVC: 2

10 Aug 1994

5340-14-320-2979
Mounting Bracket

143202979
0064712070: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-513-6514
Mounting Plate

145136514
21228365-00: RNCC: 3 | RNVC: 2
21228365-6: RNCC: 5 | RNVC: 2

1 Apr 1999

5340-14-348-7069
Retaining Strap

143487069
3101110: RNCC: 3 | RNVC: 2
3101110: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-227-9330
Mending Plate

142279330
23001042: RNCC: 3 | RNVC: 2
23001042-6: RNCC: 5 | RNVC: 2
6-192: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-361-3063
Quick Release Pin

143613063
7M93-2-9: RNCC: 3 | RNVC: 2
CMC5-20-801: RNCC: 5 | RNVC: 2

24 Jan 1980

5340-14-310-6264
Access Cover

143106264
GP8-140: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-445-5243
Runner

144455243
39533184: RNCC: 3 | RNVC: 2
39533184: RNCC: 5 | RNVC: 9

14 Feb 1991

5340-14-342-7528
Runner

143427528
129844: RNCC: 3 | RNVC: 2

16 May 1977

5340-14-485-5802
Mounting Bracket

144855802
332A58-2088-20: RNCC: 3 | RNVC: 2

29 Jan 1997

5340-14-549-0944
Angle Bracket

145490944
RA1M704415761N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-348-7047
Retaining Strap

143487047
1155037: RNCC: 3 | RNVC: 2
1155037: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-516-2515
Bumper

145162515
MB1476F01: RNCC: 3 | RNVC: 2

15 Sep 1999

5340-14-208-4727
Mending Plate

142084727
058861: RNCC: 3 | RNVC: 2
M058861: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-516-6571
Runner

145166571
46236044: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-14-544-2271
Loop Clamp

145442271
OE100180: RNCC: 3 | RNVC: 2

11 Jan 2005

5340-14-530-6868
Cover Strip

145306868
T524A2001541: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-501-6699
Metal Grille

145016699
91641254: RNCC: 3 | RNVC: 2
DS.298X285ALUAN0: RNCC: 3 | RNVC: 2

5 Nov 1997

5340-14-527-7112
Butt Hinge

145277112
ENN51276: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-14-532-0602
Cover Strip

145320602
03-250-551: RNCC: 3 | RNVC: 2
SZ03.250.551: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-353-1249
Angle Bracket

143531249
18127811: RNCC: 3 | RNVC: 2
18127811: RNCC: 3 | RNVC: 9

8 Dec 1978

5340-14-515-9239
Protection Bellows

145159239
996276: RNCC: 3 | RNVC: 2
996126: RNCC: 5 | RNVC: 2
996126: RNCC: 5 | RNVC: 2
996126: RNCC: 5 | RNVC: 9

26 Aug 1999

5340-14-042-4738
Angle Bracket

140424738
16317712: RNCC: 3 | RNVC: 2
16317712: RNCC: 5 | RNVC: 2
16317712: RNCC: 5 | RNVC: 9

19 Jan 1978

5340-14-517-2123
Angle Bracket

145172123
0264204350: RNCC: 3 | RNVC: 2
AX16329: RNCC: 5 | RNVC: 2

17 Nov 1999

5340-14-542-4146
Butt Hinge

145424146
5302835-041-02-A1: RNCC: 3 | RNVC: 2
5302835-041-02A1: RNCC: 5 | RNVC: 2

9 Jul 2004

5340-14-297-7914
Leaf Spring

142977914
NO PRIMARY REF14-297-7914: RNCC: 3 | RNVC: 2
68HK20: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-259-9952
Retaining Clip

142599952
NSE554-01-31: RNCC: 3 | RNVC: 2
55401-31: RNCC: 5 | RNVC: 2
NSE5540131: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-433-6395
Rod End Clevis

144336395
M429-220401: RNCC: 3 | RNVC: 2

2 Aug 1989

5340-14-547-7247
Mounting Bracket

145477247
100 970 85: RNCC: 3 | RNVC: 2
AA018094: RNCC: 6 | RNVC: 9

7 Nov 2005

5340-14-529-9873
Angle Bracket

145299873
160-782091-42: RNCC: 3 | RNVC: 2

24 Apr 2002

5340-14-349-9151
Mending Plate

143499151
6511-05237: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-335-5646
Bail Handle

143355646
NO PRIMARY REF14-335-5646: RNCC: 3 | RNVC: 2
1041474: RNCC: 5 | RNVC: 9
A41474: RNCC: 5 | RNVC: 9
85-687-2970: RNCC: 6 | RNVC: 9

30 Jun 1976

5340-14-389-4641
Angle Bracket

143894641
365A58-1034-22: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-302-5648
Butt Hinge

143025648
330A22-2172-20: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-223-9943
Bow Handle

142239943
NO PRIMARY REF14-223-9943: RNCC: 3 | RNVC: 2
19457: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-473-8588
Mounting Bracket

144738588
332A76-4643-20: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-501-4470
Angle Bracket

145014470
307-877-801-0: RNCC: 3 | RNVC: 2

29 Oct 1997

5340-14-381-5322
Casement Fastener

143815322
8941-10: RNCC: 3 | RNVC: 2
7374235115: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-364-0498
Mounting Bracket

143640498
365A75-2240-00: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-554-3260
Access Cover

145543260
82187828000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-547-6994
Access Cover

145476994
61644502AA: RNCC: 3 | RNVC: 2

3 Nov 2005

5340-14-444-7717
Access Cover

144447717
123010307: RNCC: 3 | RNVC: 9

21 Jan 1991

5340-14-544-5267
Mounting Bracket

145445267
21020787: RNCC: 3 | RNVC: 2

8 Feb 2005

5340-14-428-2741
Self-Locking Insert

144282741
15A3156: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-466-2971
Mounting Bracket

144662971
A63887: RNCC: 3 | RNVC: 2

3 Nov 1993

5340-14-553-8461
Mounting Bracket

145538461
82150911000: RNCC: 3 | RNVC: 2

23 May 2007

5340-14-544-1273
Ladder Safety Shoe

145441273
78039: RNCC: 3 | RNVC: 2

5 Jan 2005

5340-14-541-1633
Locking Stay

145411633
250203E901: RNCC: 3 | RNVC: 2

14 May 2004

5340-14-553-6832
Mounting Plate

145536832
82089413000: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-544-3431
Angle Bracket

145443431
82053358000: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-14-384-6609
Mounting Plate

143846609
16761798: RNCC: 3 | RNVC: 2
16761798: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-526-1905
Angle Bracket

145261905
47174631: RNCC: 3 | RNVC: 2

9 Jul 2001

5340-14-400-5743
Mounting Plate

144005743
373152: RNCC: 3 | RNVC: 2
373152: RNCC: 5 | RNVC: 9

8 May 1985

5340-14-506-9491
Access Cover

145069491
10454063: RNCC: 3 | RNVC: 2

27 May 1998

5340-14-536-0654
Synchro Clamp

145360654
803238010112: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-376-7978
Plug Button

143767978
040-1610: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-504-9505
Access Cover

145049505
01130600: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-416-8181
Handwheel

144168181
2575NR: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-437-6053
Cover Strip

144376053
PM1A121112021: RNCC: 3 | RNVC: 2
PM1A121112021: RNCC: 5 | RNVC: 2

7 Feb 1990

5340-14-408-8279
Rod End Clevis

144088279
D2272A: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-551-1171
Access Cover

145511171
61043350AA: RNCC: 3 | RNVC: 2

28 Aug 2006

5340-14-509-1937
Mounting Bracket

145091937
ER4129: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-553-6826
Mounting Bracket

145536826
82043184000: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-552-2358
Access Cover

145522358
SZ18.726.126: RNCC: 3 | RNVC: 2

5 Dec 2006

5340-14-551-5083
Loop Clamp

145515083
51411919005: RNCC: 3 | RNVC: 2
28P5: RNCC: 5 | RNVC: 2

27 Sep 2006

5340-14-505-2889
Block Clamp

145052889
011354826: RNCC: 3 | RNVC: 9

18 Mar 1998

5340-14-509-6663
Angle Bracket

145096663
RA1M216900410N1: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-551-3457
Angle Bracket

145513457
RA1M701716171: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-429-9537
Retaining Band

144299537
61955: RNCC: 3 | RNVC: 2
61955: RNCC: 5 | RNVC: 2

21 Feb 1989

5340-14-412-1760
Mending Plate

144121760
401261: RNCC: 3 | RNVC: 2
BGE401261: RNCC: 5 | RNVC: 2

8 Oct 1986

5340-14-543-5757
Mounting Bracket

145435757
E0708G2C: RNCC: 1 | RNVC: 2
E0708G2C: RNCC: 3 | RNVC: 2

23 Nov 2004

5340-14-445-5048
Retaining Strap

144455048
ST406M52P701: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-14-500-7114
Section Block Clamp

145007114
E64009998212: RNCC: 3 | RNVC: 2
F300 0T 024 7306: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-286-5193
Anchor Strap

142865193
79031102: RNCC: 3 | RNVC: 2
79031102: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-487-4998
Mounting Bracket

144874998
10259919: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-500-1463
Mounting Bracket

145001463
A308BSE: RNCC: 3 | RNVC: 2
F300 0T 024 1477: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-285-1276
Retaining Strap

142851276
270718: RNCC: 3 | RNVC: 2
270718: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-431-8507
Access Cover

144318507
1051126302: RNCC: 3 | RNVC: 2

10 May 1989

5340-14-550-7399
Access Cover

145507399
418 016: RNCC: 3 | RNVC: 2
418 016: RNCC: 5 | RNVC: 2

11 Jul 2006

5340-14-512-9319
Loop Clamp

145129319
0113018: RNCC: 3 | RNVC: 2
SER0113018: RNCC: 5 | RNVC: 9

24 Feb 1999

5340-14-553-6881
Mounting Bracket

145536881
82182689000: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-549-2100
Retaining Strap

145492100
0301540930: RNCC: 3 | RNVC: 2

9 Mar 2006

5340-14-447-6389
Angle Bracket

144476389
5000903077: RNCC: 3 | RNVC: 2

29 May 1991

5340-14-424-2649
Mounting Bracket

144242649
155500: RNCC: 3 | RNVC: 9
89404618: RNCC: 5 | RNVC: 2
155500: RNCC: 5 | RNVC: 9

19 May 1988

5340-14-535-3921
Angle Bracket

145353921
5010314033: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-315-3700
Butt Hinge

143153700
121E22-843-00-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-302-0129
T Plate

143020129
A10-19-501-70-0: RNCC: 3 | RNVC: 2
A10-19-501-70-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-395-1513
Bail Handle

143951513
PR.305-AO: RNCC: 3 | RNVC: 2
PR305A0: RNCC: 5 | RNVC: 2
91453696: RNCC: 5 | RNVC: 2

2 Oct 1984

5340-14-352-9620
Runner

143529620
429797: RNCC: 3 | RNVC: 2
J00679-01-0000P007: RNCC: 5 | RNVC: 2
429797-001: RNCC: 5 | RNVC: 9

14 Nov 1978

5340-14-284-9100
Bumper

142849100
511128: RNCC: 3 | RNVC: 2
511128-50: RNCC: 5 | RNVC: 2
4T003343-00: RNCC: 5 | RNVC: 2
511-128: RNCC: 5 | RNVC: 9
4T003343-00: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-330-0786
Bridge Clamp

143300786
12-21-16-1: RNCC: 3 | RNVC: 2
12-21-16-1: RNCC: 5 | RNVC: 2
85-622-4371: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-511-6478
Mounting Bracket

145116478
1-625-09-12: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-504-2232
Mounting Bracket

145042232
3476099M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-349-7553
Loop Clamp

143497553
053M58-573983Q: RNCC: 3 | RNVC: 2
0573983Q00: RNCC: 5 | RNVC: 2

14 Jun 1978

5340-14-485-9206
Mounting Bracket

144859206
332A75-1207-00: RNCC: 3 | RNVC: 2

19 Feb 1997

5340-14-383-6609
Angle Bracket

143836609
366A57-4014-20: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-379-4396
Mounting Plate

143794396
2206-341B509: RNCC: 3 | RNVC: 2

1 Oct 1982

5340-14-413-1688
Angle Bracket

144131688
412702140003: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-14-518-4657
Mounting Bracket

145184657
T716A2001308: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-545-8030
Mounting Bracket

145458030
10540870: RNCC: 3 | RNVC: 2

16 May 2005

5340-14-548-6827
Angle Bracket

145486827
04EQUEBIEC006604: RNCC: 3 | RNVC: 2

31 Jan 2006

5340-14-549-8637
Mounting Plate

145498637
2092434: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-547-5629
Mounting Bracket

145475629
6401LOA142601: RNCC: 3 | RNVC: 2

16 Oct 2005

5340-14-553-9003
Loop Clamp

145539003
354 234: RNCC: 3 | RNVC: 2
354 234: RNCC: 3 | RNVC: 2

29 May 2007

5340-14-245-3375
Angle Bracket

142453375
79001260: RNCC: 3 | RNVC: 2
79001260: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-455-4147
Access Cover

144554147
0308760920: RNCC: 3 | RNVC: 2
89451646: RNCC: 5 | RNVC: 2

21 May 1992

5340-14-513-5604
Mounting Bracket

145135604
DE11400: RNCC: 3 | RNVC: 2

24 Mar 1999

5340-14-418-2377
Loop Clamp

144182377
8503875: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-554-1491
Mounting Bracket

145541491
82051565000: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-540-8253
Access Cover

145408253
X1568287: RNCC: 3 | RNVC: 2

23 Apr 2004

5340-14-418-1006
Anchor Strap

144181006
131756N2: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-548-9408
Access Cover

145489408
82122445000: RNCC: 3 | RNVC: 2

24 Feb 2006

5340-14-463-6123
Loop Clamp

144636123
2107NA: RNCC: 3 | RNVC: 2
14060053-1: RNCC: 5 | RNVC: 2

21 Jun 1993

5340-14-480-0562
Mounting Bracket

144800562
10188587: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-507-6950
Shelf Bracket

145076950
10262982: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-14-542-0782
Detent Plunger

145420782
9402CMP170024: RNCC: 3 | RNVC: 2

2 Jul 2004

5340-14-527-4298
Access Cover

145274298
V107050: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-516-8574
Mounting Bracket

145168574
101163901400: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-14-511-0797
Access Cover

145110797
0006026: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-14-385-4032
Rod End Clevis

143854032
0285327030: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-425-5808
Angle Bracket

144255808
413102000001: RNCC: 3 | RNVC: 2

9 Jul 1988

5340-14-231-1143
Access Cover

142311143
P062064: RNCC: 3 | RNVC: 2
62064: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-331-1405
Loop Clamp

143311405
3158934: RNCC: 3 | RNVC: 2

2 Jul 1975

Load More Results