What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 121 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 121 of 446

5340-14-553-7774
Mounting Plate

145537774
107 283: RNCC: 3 | RNVC: 2
107 283: RNCC: 3 | RNVC: 2

22 May 2007

5340-14-411-4825
Detent Plunger

144114825
R28006: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-313-8927
Loop Clamp

143138927
51210605018: RNCC: 3 | RNVC: 2
20F18: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-552-8913
Mounting Bracket

145528913
S212A3000101: RNCC: 3 | RNVC: 2

12 Feb 2007

5340-14-330-0507
Bow Handle

143300507
79046416: RNCC: 3 | RNVC: 2
79046416: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-562-9583
Utility Resilient Mount

145629583
BFB2: RNCC: 3 | RNVC: 2

8 Dec 2009

5340-14-462-0265
Mounting Bracket

144620265
A81502R1: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-434-9883
Retaining Strap

144349883
55366: RNCC: 3 | RNVC: 2

11 Oct 1989

5340-14-392-3044
Access Cover

143923044
279666: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-238-9809
Retaining Strap

142389809
209247: RNCC: 3 | RNVC: 9
061209247: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-509-1412
Mounting Bracket

145091412
204805: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-403-4425
Access Cover

144034425
8030702: RNCC: 3 | RNVC: 2
313053: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-546-2677
Cover Strip

145462677
DE3F210188030: RNCC: 3 | RNVC: 2

21 Jun 2005

5340-14-551-4942
Angle Bracket

145514942
RA1B701986111A1: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-553-9654
Access Cover

145539654
10659536001: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-14-486-3404
Mending Plate

144863404
100212-53R: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-472-4537
Mounting Bracket

144724537
DXX1106: RNCC: 3 | RNVC: 2

26 Oct 1994

5340-14-427-5961
Access Cover

144275961
1013383902: RNCC: 3 | RNVC: 2
5000814201: RNCC: 5 | RNVC: 2
DAH1013383902: RNCC: 5 | RNVC: 9

22 Oct 1988

5340-14-454-2337
Anchor Strap

144542337
70902J133232: RNCC: 3 | RNVC: 2
133232: RNCC: 5 | RNVC: 2
5044930: RNCC: 5 | RNVC: 9

26 Mar 1992

5340-14-543-1541
Loop Clamp

145431541
251920: RNCC: 3 | RNVC: 9

26 Aug 2004

5340-14-541-7743
Mounting Plate

145417743
3675015: RNCC: 3 | RNVC: 2
S3675015: RNCC: 5 | RNVC: 2

26 Jun 2004

5340-14-215-8648
Bumper

142158648
367164: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-532-8354
Mounting Bracket

145328354
35006038: RNCC: 3 | RNVC: 2

7 Jan 2003

5340-14-441-7335
Runner

144417335
234501301200: RNCC: 3 | RNVC: 2
2345104: RNCC: 5 | RNVC: 2

17 Sep 1990

5340-14-470-3493
Loop Clamp

144703493
HRL2B1TM20PP: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-14-375-2924
Bumper

143752924
136-185: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-533-1571
Mounting Bracket

145331571
S261A1021801: RNCC: 3 | RNVC: 2

23 Jan 2003

5340-14-483-6830
Access Cover

144836830
38221740: RNCC: 3 | RNVC: 2
38221740: RNCC: 5 | RNVC: 9

27 Sep 1996

5340-14-500-4467
Pipe Hanger

145004467
D63204660000: RNCC: 3 | RNVC: 2
F300 0T 024 4633: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-230-1621
Bumper

142301621
1941: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-535-1851
Mounting Bracket

145351851
5000995286: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-478-7893
Access Cover

144787893
45640485: RNCC: 3 | RNVC: 2
45640485: RNCC: 3 | RNVC: 9

20 Nov 1995

5340-14-344-2602
Shimmy Damper

143442602
S65UF119: RNCC: 3 | RNVC: 2
VR01119: RNCC: 5 | RNVC: 2

10 Aug 1977

5340-14-336-7195
Angle Bracket

143367195
16396664: RNCC: 3 | RNVC: 2
16396664: RNCC: 5 | RNVC: 9

7 Oct 1976

5340-14-309-5714
Access Cover

143095714
0064547050: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-474-4692
Rigid Caster

144744692
6202022801: RNCC: 3 | RNVC: 2
F300 0T 015 4556: RNCC: 5 | RNVC: 9

15 Feb 1995

5340-14-513-8929
Access Cover

145138929
328134: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-528-7940
Access Cover

145287940
F1264021: RNCC: 3 | RNVC: 2
F1264021: RNCC: 5 | RNVC: 2

14 Feb 2002

5340-14-440-4833
Bumper

144404833
514085/75: RNCC: 3 | RNVC: 2

16 Jul 1990

5340-14-485-9653
Access Cover

144859653
1030410C00: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-14-548-1847
Mounting Bracket

145481847
65519172: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-14-230-1144
Loop Clamp

142301144
51211905025: RNCC: 3 | RNVC: 2
201902500: RNCC: 5 | RNVC: 2
20P25: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-505-1219
Bumper

145051219
MB2374F00: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-451-0869
Mounting Bracket

144510869
424493: RNCC: 3 | RNVC: 2
424493: RNCC: 5 | RNVC: 9

30 Oct 1991

5340-14-452-7413
Mounting Bracket

144527413
234227U: RNCC: 3 | RNVC: 2

15 Jan 1992

5340-14-338-7207
Angle Bracket

143387207
191324: RNCC: 3 | RNVC: 2
5171559100: RNCC: 5 | RNVC: 2

17 Dec 1976

5340-14-514-1790
Mounting Bracket

145141790
15271-5414-0: RNCC: 3 | RNVC: 2

28 Apr 1999

5340-14-435-3821
Clamping Catch

144353821
16-7-3410: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-14-547-7257
Mounting Bracket

145477257
100 767 46: RNCC: 3 | RNVC: 2
AA018079: RNCC: 6 | RNVC: 9

7 Nov 2005

5340-14-436-2681
Quick Release Pin

144362681
015740D: RNCC: 3 | RNVC: 2

12 Dec 1989

5340-14-554-0945
Strap Fastener Loop

145540945
999597: RNCC: 3 | RNVC: 2
MS 70101 SS: RNCC: 5 | RNVC: 2

11 Jun 2007

5340-14-464-1515
Mounting Bracket

144641515
ST406M41P174: RNCC: 3 | RNVC: 2

15 Jul 1993

5340-14-261-9278
Retaining Strap

142619278
M122603: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-335-8667
Angle Bracket

143358667
164702: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-533-2356
Mounting Plate

145332356
H117254B: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-402-0429
Retaining Strap

144020429
219848: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-254-7758
Retaining Strap

142547758
52544: RNCC: 3 | RNVC: 9

1 Jan 1969

5340-14-453-7000
Mounting Bracket

144537000
TH20K945-3: RNCC: 3 | RNVC: 2

5 Mar 1992

5340-14-361-7209
Mounting Plate

143617209
NO PRIMARY REF14-361-7209: RNCC: 3 | RNVC: 2
F2032176: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-14-294-0307
Butt Hinge

142940307
AE70-550-3P44: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-476-0913
Mounting Plate

144760913
222-3018-083: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-510-8963
Mounting Bracket

145108963
NO PRIMARY REF14-510-8963: RNCC: 3 | RNVC: 2
316365/F4972: RNCC: 5 | RNVC: 9

18 Nov 1998

5340-14-438-7702
Access Cover

144387702
330A93-2014-20: RNCC: 3 | RNVC: 2

4 Apr 1990

5340-14-473-8390
Lock Bolt

144738390
332A67-1628-20: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-280-0332
Access Cover

142800332
79221-1066: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-233-2171
Bumper

142332171
8221-01: RNCC: 3 | RNVC: 9
7903088042: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-469-1019
Mounting Bracket

144691019
305-328-404-0: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-14-542-6077
Access Cover

145426077
11228P06: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-14-408-0328
Access Cover

144080328
20724858-0: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-338-6201
Anchor Strap

143386201
0031164344: RNCC: 3 | RNVC: 2
0031164344: RNCC: 5 | RNVC: 9

17 Dec 1976

5340-14-502-0462
Rod End Connector

145020462
103090110105: RNCC: 3 | RNVC: 2

26 Nov 1997

5340-14-266-1988
Retaining Strap

142661988
465236: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-461-7682
Mounting Bracket

144617682
235040D: RNCC: 3 | RNVC: 2

24 Mar 1993

5340-14-514-0683
Angle Bracket

145140683
RA1M705344110: RNCC: 3 | RNVC: 2

22 Apr 1999

5340-14-568-1524
Utility Access Door

145681524
COUVE05064X00: RNCC: 3 | RNVC: 2

11 May 2011

5340-14-398-7944
Angle Bracket

143987944
5000251650: RNCC: 3 | RNVC: 2
5000251650: RNCC: 5 | RNVC: 9

20 Feb 1985

5340-14-500-7512
Section Block Clamp

145007512
E64009998223: RNCC: 3 | RNVC: 2
F300 0T 024 7709: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-539-5545
Mounting Plate

145395545
SZ09.402.692: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-479-4027
Rod End Clevis

144794027
RA1M171100011: RNCC: 3 | RNVC: 2

10 Jan 1996

5340-14-448-5939
Access Cover

144485939
50MS070: RNCC: 3 | RNVC: 2

3 Jul 1991

5340-14-535-1638
Rod End Clevis

145351638
5000920560: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-468-6396
Rod End Clevis

144686396
008689222P: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-14-544-7246
Access Cover

145447246
61011529: RNCC: 3 | RNVC: 2

21 Feb 2005

5340-14-546-9223
Utility Access Door

145469223
071371987000002B: RNCC: 3 | RNVC: 2

8 Sep 2005

5340-14-521-4926
Access Cover

145214926
F00200896: RNCC: 3 | RNVC: 2
F00200896: RNCC: 5 | RNVC: 9

2 Aug 2000

5340-14-449-3035
Plug Button

144493035
8815811000: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-472-6767
Mounting Bracket

144726767
16766894: RNCC: 3 | RNVC: 2

9 Nov 1994

5340-14-454-2411
Mounting Plate

144542411
16292085: RNCC: 3 | RNVC: 2
16292085: RNCC: 5 | RNVC: 9

26 Mar 1992

5340-14-538-4493
Stand Base

145384493
NGM0010037380389: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-541-1891
Bumper

145411891
L51150100: RNCC: 3 | RNVC: 2

18 May 2004

5340-14-396-0293
Synchro Clamp

143960293
405744: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-339-5753
Angle Bracket

143395753
10-106: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-514-1417
Detent Plunger

145141417
1049405W00: RNCC: 3 | RNVC: 2

28 Apr 1999

5340-14-460-2677
Bridge Clamp

144602677
19A5006: RNCC: 3 | RNVC: 2

20 Jan 1993

5340-14-509-0210
Mounting Plate

145090210
FH152003010: RNCC: 3 | RNVC: 2
FH152003000: RNCC: 3 | RNVC: 9

14 Oct 1998

5340-14-551-2617
Mounting Bracket

145512617
GS47009: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-452-3666
Block Clamp

144523666
11211556058: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-360-2208
Detent Plunger

143602208
16293767: RNCC: 3 | RNVC: 2
16293767: RNCC: 5 | RNVC: 9

23 Nov 1979

5340-14-346-1323
Bumper

143461323
7700653222: RNCC: 3 | RNVC: 2
0830058900: RNCC: 5 | RNVC: 2
0830058900: RNCC: 5 | RNVC: 2
7700655972: RNCC: 5 | RNVC: 2
7701348489: RNCC: 7 | RNVC: 2

12 Dec 1977

5340-14-486-3516
Mounting Bracket

144863516
10039-47J: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-307-3992
Retaining Strap

143073992
DLT000741: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-549-5452
Retaining Strap

145495452
61231048AA: RNCC: 3 | RNVC: 2

13 Apr 2006

5340-14-552-5647
Access Cover

145525647
MECA01091: RNCC: 3 | RNVC: 2

17 Jan 2007

5340-14-483-4754
Mounting Bracket

144834754
47134180: RNCC: 3 | RNVC: 2

12 Sep 1996

5340-14-445-3620
Access Cover

144453620
231639G: RNCC: 3 | RNVC: 2

11 Feb 1991

5340-14-437-7650
Access Cover

144377650
3126219: RNCC: 3 | RNVC: 2
3126219: RNCC: 5 | RNVC: 2

19 Feb 1990

5340-14-545-6999
Mounting Bracket

145456999
RA1M703576313N1: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-502-0415
Access Cover

145020415
103089110601: RNCC: 3 | RNVC: 2
103089110601: RNCC: 5 | RNVC: 2

26 Nov 1997

5340-14-501-1130
Access Cover

145011130
2605087: RNCC: 3 | RNVC: 2
F300 0T 025 1526: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-401-5425
Retaining Strap

144015425
225032: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-537-5199
Bow Handle

145375199
8706: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-264-7236
Butt Hinge

142647236
215-50: RNCC: 3 | RNVC: 9

1 Jan 1970

5340-14-307-0616
Loop Clamp

143070616
51211905021: RNCC: 3 | RNVC: 2
561287: RNCC: 5 | RNVC: 2
5156128700: RNCC: 5 | RNVC: 2
20P21: RNCC: 5 | RNVC: 2
217540: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-532-4256
Shelf Bracket

145324256
PM1A796011200A1: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-439-3938
Angle Bracket

144393938
DA2C632020803: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-457-7443
Mounting Bracket

144577443
71858: RNCC: 3 | RNVC: 2

17 Sep 1992

5340-14-366-8146
Mending Plate

143668146
970273: RNCC: 3 | RNVC: 2
970273: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-382-8563
Luggage Handle

143828563
200341: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-367-4625
Mending Plate

143674625
A11A221160483A1: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-279-2308
Retaining Strap

142792308
12509971: RNCC: 3 | RNVC: 2
12509971: RNCC: 3 | RNVC: 9

1 Jan 1971

5340-14-382-5230
Mounting Plate

143825230
16170140: RNCC: 3 | RNVC: 2
16170140: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-366-7884
Control Rod

143667884
969164: RNCC: 3 | RNVC: 2
969164: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-501-8960
Synchro Clamp

145018960
S4573117: RNCC: 3 | RNVC: 2

19 Nov 1997

5340-14-548-3907
Loop Clamp

145483907
EN4113S15NH: RNCC: 2 | RNVC: 2

12 Jan 2006

5340-14-460-5321
Mounting Bracket

144605321
16929131: RNCC: 3 | RNVC: 2

27 Jan 1993

5340-14-306-7731
Bumper

143067731
466-7M8P67: RNCC: 3 | RNVC: 2
466-7M8P67: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-451-7973
Mounting Plate

144517973
355953: RNCC: 3 | RNVC: 2
355953: RNCC: 5 | RNVC: 9

4 Dec 1991

5340-14-545-2652
Mounting Bracket

145452652
S215A4012105: RNCC: 3 | RNVC: 2

30 Mar 2005

5340-14-436-6312
Mounting Bracket

144366312
DA2C202448600: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-455-5670
Mounting Bracket

144555670
1060117: RNCC: 3 | RNVC: 2
1060117: RNCC: 5 | RNVC: 9
5044632: RNCC: 5 | RNVC: 9

28 May 1992

5340-14-362-4003
Mending Plate

143624003
095018F: RNCC: 3 | RNVC: 2
095018: RNCC: 5 | RNVC: 2
095018F: RNCC: 5 | RNVC: 2

19 Mar 1980

5340-14-545-1007
Mounting Bracket

145451007
5010602119: RNCC: 3 | RNVC: 2

17 Mar 2005

5340-14-449-0469
Synchro Clamp

144490469
39232931: RNCC: 3 | RNVC: 2
39232931: RNCC: 5 | RNVC: 9

24 Jul 1991

5340-14-231-0911
Loop Clamp

142310911
51213105021: RNCC: 3 | RNVC: 2
20G21: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-523-2492
Retaining Band

145232492
RA1M701666815: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-507-8466
Pipe Hanger

145078466
MTFLXM9004000AA: RNCC: 3 | RNVC: 2
SAV079: RNCC: 5 | RNVC: 2

21 Aug 1998

5340-14-529-0850
Shelf Bracket

145290850
PM1A596114110A1: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-14-330-9941
Angle Bracket

143309941
0000140953: RNCC: 3 | RNVC: 2
0000140953: RNCC: 5 | RNVC: 9
140953: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-354-7842
Anchor Strap

143547842
68488: RNCC: 3 | RNVC: 2
68488: RNCC: 3 | RNVC: 9

20 Feb 1979

5340-14-386-1814
Access Cover

143861814
CPA133036: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-504-9977
Access Cover

145049977
5000294497: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-541-6268
Utility Access Door

145416268
1091034: RNCC: 3 | RNVC: 2

15 Jun 2004

5340-14-437-0951
Rod End Clevis

144370951
DZK5D8J206: RNCC: 3 | RNVC: 2

17 Jan 1990

5340-14-526-3109
Mounting Plate

145263109
0A/A14004001: RNCC: 3 | RNVC: 2

18 Jul 2001

5340-14-538-0427
Locking Stay

145380427
4330100960: RNCC: 3 | RNVC: 2

9 Dec 2003

5340-14-459-7417
Mounting Plate

144597417
230064BIS: RNCC: 3 | RNVC: 2

16 Dec 1992

5340-14-455-9733
Plate Spacer

144559733
PM1A827004002: RNCC: 3 | RNVC: 2
PM1A827004002: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-507-6452
Runner

145076452
96183041: RNCC: 3 | RNVC: 2

7 Aug 1998

5340-14-461-9362
Cover Strip

144619362
T700A5210225100: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-446-7053
Mechanical Puller

144467053
600008: RNCC: 3 | RNVC: 2

9 Apr 1991

5340-14-455-8704
Angle Bracket

144558704
0000706158: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-486-3206
Metal Grille

144863206
45431605: RNCC: 3 | RNVC: 2
45431605: RNCC: 3 | RNVC: 9

12 Mar 1997

5340-14-496-3013
Bumper

144963013
F0996031: RNCC: 3 | RNVC: 2
F0996031: RNCC: 5 | RNVC: 9
F300 0T 021 3646: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-527-7501
Mounting Bracket

145277501
709999: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-14-395-1855
Loop Clamp

143951855
51121905016: RNCC: 3 | RNVC: 2
24PE16: RNCC: 5 | RNVC: 2
25PE16: RNCC: 5 | RNVC: 2
85-692-6117: RNCC: 6 | RNVC: 9

2 Oct 1984

5340-14-398-6447
Webbing Strap

143986447
B80CAT3-4M: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-460-6948
Swivel Caster

144606948
0004-0027: RNCC: 3 | RNVC: 2
SAF0004-0027: RNCC: 5 | RNVC: 9

4 Feb 1993

5340-14-389-1126
Angle Bracket

143891126
366A25-0032-2201: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-219-0560
Mounting Bracket

142190560
253-5M361P47A: RNCC: 3 | RNVC: 9
PA253-5M361P47A: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-448-0107
Mounting Bracket

144480107
1700-13: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-14-309-7400
Retaining Strap

143097400
007-32-42: RNCC: 3 | RNVC: 2
EB007-32-42: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-298-9467
Loop Clamp

142989467
684054-00: RNCC: 3 | RNVC: 2
C0LLIERP0UR15-412: RNCC: 5 | RNVC: 2
684-054-000: RNCC: 5 | RNVC: 2
161-2862: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-313-4605
Rod End Clevis

143134605
SP5-00-03-41: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-541-9612
Access Cover

145419612
1830653-801: RNCC: 3 | RNVC: 2
502112002036A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-539-9858
Mounting Bracket

145399858
RN271/77121: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-365-7336
Retaining Strap

143657336
NO PRIMARY REF14-365-7336: RNCC: 3 | RNVC: 2
404109982: RNCC: 5 | RNVC: 9
404109982: RNCC: 5 | RNVC: 9

8 Oct 1980

5340-14-565-6248
Utility Resilient Mount

145656248
ACI 95-11 NL: RNCC: 3 | RNVC: 2

9 Sep 2010

5340-14-437-9509
Bridge Clamp

144379509
330A64-0605-03: RNCC: 3 | RNVC: 2

28 Feb 1990

5340-14-533-9113
Loop Clamp

145339113
C6045-12HISO: RNCC: 3 | RNVC: 2

27 Feb 2003

5340-14-391-0695
Butt Hinge

143910695
Z355-008-000: RNCC: 3 | RNVC: 2
Z355-008: RNCC: 5 | RNVC: 2

1 Mar 1984

5340-14-378-1628
Bow Handle

143781628
3511-318-05431: RNCC: 3 | RNVC: 2
3511-318-05431: RNCC: 5 | RNVC: 9

20 Jul 1982

5340-14-403-4475
Runner

144034475
3511 245 05531: RNCC: 3 | RNVC: 2
3511-245-05531: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-412-2117
Bow Handle

144122117
332A22-1361-00: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-435-2389
Anchor Strap

144352389
PAA14-29-243: RNCC: 3 | RNVC: 2
TID31989: RNCC: 5 | RNVC: 2

31 Oct 1989

5340-14-375-8373
Mounting Plate

143758373
16234459: RNCC: 3 | RNVC: 2
16234459: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-375-9297
Anchor Strap

143759297
136-416: RNCC: 3 | RNVC: 2

30 Mar 1982

5340-14-354-0652
Pipe Hanger

143540652
C66312: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-357-1552
Mounting Bracket

143571552
A11A231474111: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-520-0167
Mounting Bracket

145200167
10581775: RNCC: 3 | RNVC: 2

3 May 2000

5340-14-357-0220
Strap Hinge

143570220
5000072010: RNCC: 3 | RNVC: 2
5000072010: RNCC: 5 | RNVC: 9

7 Jun 1979

5340-14-550-4914
Angle Bracket

145504914
RA1M701872251N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-355-8427
Mending Plate

143558427
18606291: RNCC: 3 | RNVC: 2
18606291: RNCC: 3 | RNVC: 9

5 Apr 1979

5340-14-455-9389
Block Clamp

144559389
PM1A746439010: RNCC: 3 | RNVC: 2
PM1A746439010: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-381-4638
Angle Bracket

143814638
2206-821C503: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-444-7612
Bow Handle

144447612
61410: RNCC: 3 | RNVC: 2

21 Jan 1991

5340-14-469-6434
Bumper

144696434
PM1A602122042A1: RNCC: 3 | RNVC: 2
PM1A602122042A1: RNCC: 5 | RNVC: 2

4 May 1994

5340-14-500-5367
Bumper

145005367
511230: RNCC: 3 | RNVC: 2
F300 0T 024 5542: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-242-8762
Loop Clamp

142428762
366879: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-539-5014
Mounting Bracket

145395014
MECZ7354: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-14-543-3201
Mounting Bracket

145433201
9105220P115: RNCC: 3 | RNVC: 2

20 Oct 2004

5340-14-457-4341
Mounting Plate

144574341
20122809: RNCC: 3 | RNVC: 2

3 Sep 1992

5340-14-349-7954
Retaining Strap

143497954
TH20J2302: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-455-9315
Plate Spacer

144559315
PM1A727214112: RNCC: 3 | RNVC: 2
PM1A727214112: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-399-0479
Retaining Strap

143990479
16805232: RNCC: 3 | RNVC: 2
16805232: RNCC: 3 | RNVC: 9

6 Mar 1985

5340-14-543-6379
Angle Bracket

145436379
AMPC GENE E228303: RNCC: 3 | RNVC: 2

27 Nov 2004

5340-14-460-3192
Butt Hinge

144603192
TNS1C1015A: RNCC: 3 | RNVC: 2

21 Jan 1993

5340-14-467-0128
Access Cover

144670128
055W01-537104Q: RNCC: 3 | RNVC: 2
0537104Q00: RNCC: 5 | RNVC: 2

15 Dec 1993

5340-14-335-8761
Angle Bracket

143358761
190153: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-311-9987
Retaining Strap

143119987
201711: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-536-6804
Mounting Bracket

145366804
47085292: RNCC: 3 | RNVC: 2

10 Sep 2003

5340-14-387-0888
Mounting Plate

143870888
T8002ML2F8A: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-339-3632
Retaining Strap

143393632
192611: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-230-5254
Mounting Bracket

142305254
0202120290: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-446-1261
Bridge Clamp

144461261
71444: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-495-7655
Lock Bolt

144957655
304018038014A: RNCC: 3 | RNVC: 9
F300 0T 020 0467: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-477-0425
Mounting Plate

144770425
45463875: RNCC: 3 | RNVC: 2

19 Jul 1995

5340-14-414-4088
Butt Hinge

144144088
DA1D202701550: RNCC: 3 | RNVC: 2

28 Jan 1987

5340-14-468-3862
Angle Bracket

144683862
554468: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-14-548-5315
Arched Cushion

145485315
46061802: RNCC: 3 | RNVC: 2

25 Jan 2006

5340-14-412-2284
Mounting Plate

144122284
0164163260: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-435-1054
Angle Bracket

144351054
3005250: RNCC: 3 | RNVC: 2

18 Oct 1989

5340-14-433-4346
Angle Bracket

144334346
0868617R00: RNCC: 3 | RNVC: 2

25 Jul 1989

5340-14-515-2391
Angle Bracket

145152391
3534321306: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-519-4546
Mounting Plate

145194546
29479506: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-14-453-6922
Compression Cup

144536922
C92953: RNCC: 3 | RNVC: 2
C92953: RNCC: 5 | RNVC: 2
C92953: RNCC: 5 | RNVC: 9

5 Mar 1992

5340-14-481-0345
Bow Handle

144810345
3BM01034AAAA: RNCC: 3 | RNVC: 2
3BM01034AAAA: RNCC: 5 | RNVC: 9

18 Apr 1996

5340-14-519-0889
Bow Handle

145190889
1SH41722316: RNCC: 3 | RNVC: 2

7 Mar 2000

5340-14-320-6528
Leaf Spring

143206528
0000260845: RNCC: 3 | RNVC: 2
0000260845: RNCC: 5 | RNVC: 9
260845: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-524-4497
Mounting Bracket

145244497
TC3173P001: RNCC: 3 | RNVC: 2

20 Mar 2001

5340-14-509-6832
Angle Bracket

145096832
RA1M812400141: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-507-9082
Mounting Bracket

145079082
14 147819 00: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-399-0529
Bumper

143990529
477321C: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-484-9005
Metal Grille

144849005
189316-614: RNCC: 3 | RNVC: 9

12 Dec 1996

5340-14-541-3492
Detent Plunger

145413492
220272: RNCC: 3 | RNVC: 2

29 May 2004

5340-14-320-4553
Angle Bracket

143204553
26247023: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-399-1312
Loop Clamp

143991312
7703085014: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-488-4223
Angle Bracket

144884223
10096875: RNCC: 3 | RNVC: 2

7 May 1997

5340-14-476-8778
Exit Bolt

144768778
45212239: RNCC: 3 | RNVC: 2
45212239: RNCC: 3 | RNVC: 9

5 Jul 1995

5340-14-398-6689
Retaining Strap

143986689
4146379: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-485-6197
Mounting Bracket

144856197
3BM01045AAAA: RNCC: 3 | RNVC: 2
3BM01045AAAA: RNCC: 5 | RNVC: 9

6 Feb 1997

5340-14-525-8475
Mounting Bracket

145258475
10551415: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-449-3172
Mounting Plate

144493172
553B020: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-457-9675
Butt Hinge

144579675
29078737: RNCC: 3 | RNVC: 2

2 Oct 1992

5340-14-366-8056
Mending Plate

143668056
969883: RNCC: 3 | RNVC: 2
969883: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-549-3077
Mounting Bracket

145493077
5010631672: RNCC: 3 | RNVC: 2

21 Mar 2006

5340-14-466-9630
Expansion Plug

144669630
BOUCHONCUVETTE28: RNCC: 3 | RNVC: 2
430964: RNCC: 5 | RNVC: 2
28AC: RNCC: 5 | RNVC: 2

9 Dec 1993

5340-14-357-2415
Mending Plate

143572415
19306026: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-523-5164
Loop Clamp

145235164
31023700: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-14-532-0367
Mounting Bracket

145320367
0RK32200: RNCC: 3 | RNVC: 2
0RK32200: RNCC: 5 | RNVC: 9

9 Oct 2002

5340-14-448-2508
Mounting Bracket

144482508
27110138-6: RNCC: 3 | RNVC: 2

18 Jun 1991

5340-14-484-3461
Cane Bolt

144843461
1107670L00: RNCC: 3 | RNVC: 2

14 Nov 1996

5340-14-543-4450
Mounting Bracket

145434450
072847987000400: RNCC: 3 | RNVC: 2

29 Oct 2004

5340-14-257-8504
Mending Plate

142578504
NO PRIMARY REF14-257-8504: RNCC: 3 | RNVC: 2
631587: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-216-5346
Expansion Plug

142165346
E29584-69A: RNCC: 3 | RNVC: 2
107: RNCC: 5 | RNVC: 9
340511069: RNCC: 5 | RNVC: 9
69: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-463-8816
Mounting Bracket

144638816
365A61-6541-41: RNCC: 3 | RNVC: 2
85-694-9821: RNCC: 6 | RNVC: 9

30 Jun 1993

5340-14-284-6205
Bow Handle

142846205
FAVSCR38-154B: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-389-2341
Retaining Strap

143892341
BSC8PA101-0018: RNCC: 3 | RNVC: 2
85-692-3786: RNCC: 6 | RNVC: 9

29 Nov 1983

5340-14-454-3976
Mounting Plate

144543976
31-27443: RNCC: 3 | RNVC: 2
31-27443: RNCC: 5 | RNVC: 9

1 Apr 1992

5340-14-280-0291
Access Cover

142800291
78624-48: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-507-2323
Loop Clamp

145072323
51313110014: RNCC: 3 | RNVC: 2

24 Jun 1998

5340-14-554-9299
Mounting Bracket

145549299
1524356: RNCC: 3 | RNVC: 2

10 Sep 2007

5340-14-500-4935
Mounting Bracket

145004935
12036: RNCC: 3 | RNVC: 2
F300 0T 024 5106: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-507-0880
Angle Bracket

145070880
10380582: RNCC: 3 | RNVC: 2

10 Jun 1998

5340-14-485-5447
Mounting Plate

144855447
20342218: RNCC: 3 | RNVC: 2

29 Jan 1997

5340-14-375-8409
Angle Bracket

143758409
16657977: RNCC: 3 | RNVC: 2

30 Mar 1982

5340-14-498-8650
Loop Clamp

144988650
91951879: RNCC: 3 | RNVC: 2
87751300032: RNCC: 5 | RNVC: 2
F300 0T 009 4709: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-366-2783
Bumper

143662783
A11A602221023: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-14-537-9061
Mounting Bracket

145379061
10616806: RNCC: 3 | RNVC: 2

3 Dec 2003

5340-14-495-0802
Runner

144950802
F00143253: RNCC: 3 | RNVC: 2
F00143253: RNCC: 5 | RNVC: 9
F300 0T 018 3189: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-472-6668
Mounting Bracket

144726668
DRV66196: RNCC: 3 | RNVC: 2

9 Nov 1994

5340-14-420-4638
Loop Clamp

144204638
06205577: RNCC: 3 | RNVC: 2

10 Dec 1987

5340-14-514-0458
Angle Bracket

145140458
RA1M112111040: RNCC: 3 | RNVC: 2

22 Apr 1999

5340-14-385-3034
Angle Bracket

143853034
397457: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-511-7073
Mounting Plate

145117073
SEM012550213520: RNCC: 3 | RNVC: 2

12 Jan 1999

5340-14-327-1331
Loop Clamp

143271331
4307489: RNCC: 3 | RNVC: 2
4307489: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-382-9448
Access Cover

143829448
33162: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-552-2787
Access Cover

145522787
F1450403: RNCC: 3 | RNVC: 2

7 Dec 2006

5340-14-542-7585
Access Cover

145427585
61016892AA: RNCC: 3 | RNVC: 2

12 Aug 2004

5340-14-301-4467
Butt Hinge

143014467
P26-306-140X50GS0UDEEAC: RNCC: 2 | RNVC: 2

1 Jan 1973

5340-14-423-7695
Detent Plunger

144237695
350A77-1138-20: RNCC: 3 | RNVC: 2

28 Apr 1988

5340-14-369-1845
Rigid Caster

143691845
365A91-5410-11: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-318-8054
Synchro Clamp

143188054
NO PRIMARY REF14-318-8054: RNCC: 3 | RNVC: 2
124977: RNCC: 5 | RNVC: 9
C124977: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-508-8890
Detent Plunger

145088890
3246-882-000: RNCC: 3 | RNVC: 2
1123507Y00: RNCC: 5 | RNVC: 2
3246-882-000: RNCC: 5 | RNVC: 2

6 Oct 1998

5340-14-386-6571
Quick Release Pin

143866571
9970-115-449: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-453-5472
Loop Clamp

144535472
21327368: RNCC: 3 | RNVC: 2
21327368-8: RNCC: 5 | RNVC: 2

26 Feb 1992

5340-14-401-5296
Loop Clamp

144015296
51213105014: RNCC: 3 | RNVC: 2
A0021-20G14: RNCC: 5 | RNVC: 2
20G14: RNCC: 5 | RNVC: 2

13 Jun 1985

5340-14-338-8788
Retaining Strap

143388788
0400420040: RNCC: 3 | RNVC: 2
AZ182U14: RNCC: 3 | RNVC: 2
650-791-038-0: RNCC: 5 | RNVC: 2
AZ182U14-15: RNCC: 5 | RNVC: 2
54358: RNCC: 5 | RNVC: 9

17 Dec 1976

5340-14-435-3887
Butt Hinge

144353887
43-1-3302: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-14-468-1345
Runner

144681345
NO PRIMARY REF14-468-1345: RNCC: 3 | RNVC: 2
32-742-500: RNCC: 5 | RNVC: 9

9 Feb 1994

5340-14-370-7949
Flush Catch Claw

143707949
682-42816-00: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-307-5111
Angle Bracket

143075111
E4M703-18-833: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-448-5799
Mounting Plate

144485799
FA1E703-42: RNCC: 3 | RNVC: 2

2 Jul 1991

5340-14-301-4491
Butt Hinge

143014491
J36-220-160X80GLAIT0N: RNCC: 2 | RNVC: 2

1 Jan 1973

5340-14-308-6574
Angle Bracket

143086574
A10-69-116-11-0: RNCC: 3 | RNVC: 2
A10-69-116-11-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-465-4866
Tee Hinge

144654866
365A25-3066-09: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-527-3414
Loop Clamp

145273414
SGL11-19-5: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-353-2076
Mending Plate

143532076
PAA73-10-021: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-398-6436
Webbing Strap

143986436
E60-4M-B-307-1-30CM: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-509-7071
Mounting Plate

145097071
399-002-227-0: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-454-0016
Synchro Clamp

144540016
303-280-445-0: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-14-256-2639
Retaining Strap

142562639
NO PRIMARY REF14-256-2639: RNCC: 3 | RNVC: 2
12506839: RNCC: 3 | RNVC: 2
12506839: RNCC: 5 | RNVC: 2
91302380: RNCC: 5 | RNVC: 2
91302380: RNCC: 5 | RNVC: 9
12506839: RNCC: 5 | RNVC: 9
6103: RNCC: 5 | RNVC: 9
91302380: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-277-7705
Support Hook

142777705
SA13-1-02-02-009: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-316-5516
Rod End Connector

143165516
321A92-2065-21: RNCC: 3 | RNVC: 2
321-92-2065-21: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-328-1947
Mending Plate

143281947
23093696: RNCC: 3 | RNVC: 2
23093696-4: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-505-4640
Angle Bracket

145054640
12241023: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-416-2517
Webbing Strap

144162517
8163403: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-362-2550
Angle Bracket

143622550
A11A211160090A1: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-553-4601
Angle Bracket

145534601
DA1N202783210A1: RNCC: 3 | RNVC: 2

5 Apr 2007

5340-14-478-4668
Angle Bracket

144784668
45273298: RNCC: 3 | RNVC: 2
45273298: RNCC: 3 | RNVC: 9

8 Nov 1995

5340-14-547-7761
Mounting Bracket

145477761
5010636487: RNCC: 3 | RNVC: 2

12 Nov 2005

5340-14-546-9670
Cover Strip

145469670
RA1B721325722A1N1: RNCC: 3 | RNVC: 2

12 Sep 2005

5340-14-554-2186
Loop Clamp

145542186
357 207: RNCC: 3 | RNVC: 2
357 207: RNCC: 3 | RNVC: 2

13 Jun 2007

5340-14-462-0323
Permanent Magnet

144620323
A87517: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-454-4988
Kick Door Plate

144544988
0185100900: RNCC: 3 | RNVC: 2
89473264: RNCC: 5 | RNVC: 2

2 Apr 1992

5340-14-534-2920
Mounting Bracket

145342920
10675876000: RNCC: 3 | RNVC: 2

19 Mar 2003

5340-14-419-2203
Loop Clamp

144192203
51310602008: RNCC: 3 | RNVC: 2
21F8: RNCC: 5 | RNVC: 2
9562811310: RNCC: 5 | RNVC: 2
21F8: RNCC: 5 | RNVC: 9

16 Oct 1987

5340-14-546-0073
Mounting Bracket

145460073
072944987000017: RNCC: 3 | RNVC: 2

4 Jun 2005

5340-14-359-1937
Loop Clamp

143591937
512131020131: RNCC: 3 | RNVC: 2
30G13: RNCC: 5 | RNVC: 2
9562810500: RNCC: 5 | RNVC: 2

2 Oct 1979

5340-14-534-8605
Mounting Bracket

145348605
10669296000: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-14-485-6200
Mounting Bracket

144856200
3BM01535AAAA: RNCC: 3 | RNVC: 2
3BM01535AAAA: RNCC: 5 | RNVC: 9

6 Feb 1997

5340-14-538-7735
Handwheel

145387735
NGM0011040318938: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-355-4067
Loop Clamp

143554067
9136221120: RNCC: 3 | RNVC: 2
9-136221-120: RNCC: 5 | RNVC: 2

19 Mar 1979

5340-14-388-7348
Loop Clamp

143887348
SST3S30: RNCC: 3 | RNVC: 2

3 Nov 1983

5340-14-514-0684
Angle Bracket

145140684
RA1M705364210: RNCC: 3 | RNVC: 2

22 Apr 1999

5340-14-551-5159
Mounting Bracket

145515159
RA1M701962111A1: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-381-3560
Loop Clamp

143813560
47964: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-332-8747
Handwheel

143328747
393994: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-518-4053
Access Cover

145184053
3425010: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-14-313-7014
Access Cover

143137014
0064761550: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-383-3771
Plug Button

143833771
441980: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-525-7439
Access Cover

145257439
04195106: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-536-5412
Access Cover

145365412
61376353AA: RNCC: 3 | RNVC: 2

28 Aug 2003

5340-14-359-1194
Rod End Clevis

143591194
A11A236301102: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-519-4857
Access Cover

145194857
FGFB910027A1: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-450-1704
Mounting Bracket

144501704
92PD260118: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-272-7667
Bail Handle

142727667
6232-0879: RNCC: 3 | RNVC: 2
6232-0879: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-537-4804
Cushioning Pad

145374804
6501BRG110032: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-508-4310
Mounting Plate

145084310
10335006: RNCC: 3 | RNVC: 2

9 Sep 1998

5340-14-444-6314
Bail Handle

144446314
10502-277: RNCC: 3 | RNVC: 2
1066571G00: RNCC: 5 | RNVC: 2
10502-111: RNCC: 5 | RNVC: 9

16 Jan 1991

5340-14-532-2448
Rim Lock Set

145322448
911D+1729-09: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-14-438-8745
Detent Plunger

144388745
005062010039: RNCC: 3 | RNVC: 2
0049171: RNCC: 5 | RNVC: 2

10 Apr 1990

5340-14-344-2475
Surface Bolt

143442475
23577: RNCC: 3 | RNVC: 2
01307396: RNCC: 5 | RNVC: 2

10 Aug 1977

5340-14-210-6742
Access Cover

142106742
85598: RNCC: 3 | RNVC: 2
60037-06: RNCC: 3 | RNVC: 9

1 Jan 1964

5340-14-500-5878
Mounting Bracket

145005878
7925: RNCC: 3 | RNVC: 2
F300 0T 024 6062: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-449-3229
Runner

144493229
578A005: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-515-4376
Mounting Plate

145154376
RB1235: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-465-8457
Mounting Plate

144658457
1042209C00: RNCC: 3 | RNVC: 2

14 Oct 1993

5340-14-351-0381
Threaded Rod End

143510381
1013030: RNCC: 3 | RNVC: 2
101L3030: RNCC: 5 | RNVC: 2
FOE1013030: RNCC: 5 | RNVC: 9

10 Aug 1978

5340-14-266-1220
Bow Handle

142661220
40576D5: RNCC: 3 | RNVC: 2
P78: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-326-4077
Control Rod

143264077
TS74AMX161318: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-349-9987
Loop Clamp

143499987
51413105011: RNCC: 3 | RNVC: 2
28G11: RNCC: 5 | RNVC: 2

14 Jun 1978

5340-14-451-7723
Corner Brace

144517723
62729: RNCC: 3 | RNVC: 2

4 Dec 1991

5340-14-296-8273
Retaining Strap

142968273
171160: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-379-6857
Access Cover

143796857
46027: RNCC: 3 | RNVC: 9

20 Oct 1982

5340-14-397-1233
Access Cover

143971233
20735088: RNCC: 3 | RNVC: 2

1 Dec 1984

5340-14-467-1408
Access Cover

144671408
T62189110100: RNCC: 3 | RNVC: 2

16 Dec 1993

5340-14-504-1906
Mounting Bracket

145041906
1694844M5: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-504-2747
Mounting Bracket

145042747
3613534M95: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-428-5539
Bow Handle

144285539
MKG3712217: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-431-7573
Angle Bracket

144317573
39079787: RNCC: 3 | RNVC: 2
39079787: RNCC: 3 | RNVC: 9

10 May 1989

5340-14-568-6441
Utility Access Door

145686441
7421548288: RNCC: 3 | RNVC: 2
21548288: RNCC: 5 | RNVC: 2

23 Jun 2011

5340-14-555-8205
Mounting Bracket

145558205
S334A1011106: RNCC: 3 | RNVC: 2

17 Dec 2007

5340-14-553-5385
Mounting Plate

145535385
SP01007486A: RNCC: 3 | RNVC: 2

13 Apr 2007

5340-14-507-2570
Runner

145072570
588A231: RNCC: 3 | RNVC: 2

24 Jun 1998

5340-14-511-0788
Lock Bolt

145110788
2441008: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-14-484-7072
Webbing Strap

144847072
6347: RNCC: 3 | RNVC: 2

4 Dec 1996

5340-14-526-9069
Webbing Strap

145269069
56633701: RNCC: 3 | RNVC: 2

14 Sep 2001

5340-14-414-0194
Retaining Strap

144140194
BFC20819: RNCC: 3 | RNVC: 2
89172008: RNCC: 5 | RNVC: 2

22 Jan 1987

5340-14-554-9418
Loop Clamp

145549418
78651DH9CF: RNCC: 1 | RNVC: 2
78651DH9CF: RNCC: 3 | RNVC: 2

11 Sep 2007

5340-14-424-2853
Butt Hinge

144242853
0185100660: RNCC: 3 | RNVC: 2
CC422AIB: RNCC: 5 | RNVC: 1
89414566: RNCC: 5 | RNVC: 2

19 May 1988

5340-14-478-1240
Shelf Bracket

144781240
RA1M240000360: RNCC: 3 | RNVC: 2

11 Oct 1995

5340-14-308-3870
Rod End Connector

143083870
E4M801-003: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-353-6779
Loop Clamp

143536779
501-804-537-0: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-485-6024
Plug Button

144856024
BA2-3/4INOX: RNCC: 3 | RNVC: 2

4 Feb 1997

5340-14-393-4797
Doorknob

143934797
NO PRIMARY REF14-393-4797: RNCC: 3 | RNVC: 2
350549: RNCC: 5 | RNVC: 9
A9688-6: RNCC: 5 | RNVC: 9

7 Apr 1984

5340-14-436-2581
Runner

144362581
480E571Z: RNCC: 3 | RNVC: 2

12 Dec 1989

5340-14-548-1072
Angle Bracket

145481072
RA1M216400403N1: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-440-3098
Mounting Plate

144403098
29664249: RNCC: 3 | RNVC: 2
29664249: RNCC: 5 | RNVC: 9

11 Jul 1990

5340-14-442-7516
Retaining Strap

144427516
PM1A503320066: RNCC: 3 | RNVC: 2
PM1A503320066: RNCC: 5 | RNVC: 2

31 Oct 1990

5340-14-503-8449
Mounting Bracket

145038449
1020389R00: RNCC: 3 | RNVC: 2

2 Feb 1998

5340-14-362-5407
Pipe Hanger

143625407
219271: RNCC: 3 | RNVC: 2

19 Mar 1980

5340-14-541-1540
Mounting Bracket

145411540
18334: RNCC: 3 | RNVC: 2

14 May 2004

5340-14-206-3284
Leaf Spring

142063284
305064: RNCC: 3 | RNVC: 2
590108: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-548-1163
Angle Bracket

145481163
RA1A701177111N1: RNCC: 3 | RNVC: 2

12 Dec 2005

5340-14-521-8944
Mounting Plate

145218944
46243714: RNCC: 3 | RNVC: 2

25 Sep 2000

5340-14-535-1584
Mounting Bracket

145351584
5010492465: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-553-3266
Mounting Plate

145533266
10527942001: RNCC: 3 | RNVC: 2

24 Mar 2007

5340-14-418-3385
Angle Bracket

144183385
564244G0006: RNCC: 3 | RNVC: 2

12 Aug 1987

5340-14-375-7897
Loop Clamp

143757897
0000485739: RNCC: 3 | RNVC: 2
485739: RNCC: 5 | RNVC: 9

26 Feb 1982

5340-14-384-0495
Mounting Plate

143840495
110432-19: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-413-0947
Retaining Strap

144130947
ST406M42P24: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-14-379-7657
Retaining Strap

143797657
BAZ5164: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-355-2560
Loop Clamp

143552560
70517006: RNCC: 3 | RNVC: 2
70517006: RNCC: 5 | RNVC: 2
SAF70517006: RNCC: 5 | RNVC: 9

19 Mar 1979

5340-14-379-6331
Mending Plate

143796331
16343223: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-428-6283
Block Clamp

144286283
LB11111556034: RNCC: 3 | RNVC: 2
11111556034: RNCC: 5 | RNVC: 2

8 Dec 1988

5340-14-428-2712
Mounting Plate

144282712
15A1536: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-377-8048
Handwheel

143778048
41103PC12: RNCC: 3 | RNVC: 9
41103PC12: RNCC: 5 | RNVC: 2

10 Jun 1982

5340-14-367-4283
Mounting Plate

143674283
15449746: RNCC: 3 | RNVC: 2
15449746: RNCC: 5 | RNVC: 2
15449746: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-466-2989
Mounting Bracket

144662989
A66966: RNCC: 3 | RNVC: 2

3 Nov 1993

5340-14-265-6351
Angle Bracket

142656351
26247064: RNCC: 3 | RNVC: 2
C247064: RNCC: 5 | RNVC: 2
540248: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-374-6103
Retaining Strap

143746103
0035734572: RNCC: 3 | RNVC: 2
0035734572: RNCC: 5 | RNVC: 9
35734572: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-541-4676
Rod End Clevis

145414676
4SH41565180: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-526-0665
Butt Hinge

145260665
SYB3350: RNCC: 3 | RNVC: 2
AL050GM50F-CHROME: RNCC: 3 | RNVC: 2
7050050FC: RNCC: 5 | RNVC: 2

29 Jun 2001

5340-14-551-4943
Angle Bracket

145514943
RA1B701986181: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-527-4228
Mounting Plate

145274228
P109311K: RNCC: 3 | RNVC: 2
P109311V: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-524-4823
Access Cover

145244823
396A925: RNCC: 3 | RNVC: 2
39 60000 925: RNCC: 5 | RNVC: 9

21 Mar 2001

5340-14-537-1921
Utility Access Door

145371921
L72ZMZ1Z0H60600: RNCC: 3 | RNVC: 2

14 Oct 2003

5340-14-526-9709
Mounting Bracket

145269709
10544070: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-512-5979
Access Cover

145125979
201611: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-441-1775
Mounting Bracket

144411775
76280-5: RNCC: 3 | RNVC: 2
89280421: RNCC: 5 | RNVC: 2

22 Aug 1990

5340-14-462-3572
Access Cover

144623572
74792: RNCC: 3 | RNVC: 2
63283: RNCC: 5 | RNVC: 2

15 Apr 1993

5340-14-513-0584
Webbing Strap

145130584
009598035P: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-14-397-0858
Retaining Strap

143970858
20079: RNCC: 3 | RNVC: 2

1 Dec 1984

5340-14-506-2974
Angle Bracket

145062974
38757203: RNCC: 3 | RNVC: 2
38757203: RNCC: 5 | RNVC: 9

22 Apr 1998

5340-14-530-0150
Mounting Plate

145300150
8006657A00: RNCC: 3 | RNVC: 2

30 Apr 2002

5340-14-543-1401
Loop Clamp

145431401
NSA5516C12ND: RNCC: 1 | RNVC: 2
55162512: RNCC: 3 | RNVC: 2

26 Aug 2004

5340-14-554-2525
Angle Bracket

145542525
82142417000: RNCC: 3 | RNVC: 2

15 Jun 2007

5340-14-375-9279
Angle Bracket

143759279
136-155: RNCC: 3 | RNVC: 2

30 Mar 1982

5340-14-405-5832
Mounting Plate

144055832
M4Z6184904001: RNCC: 3 | RNVC: 2

4 Dec 1985

5340-14-360-2184
Door Handle

143602184
16293669: RNCC: 3 | RNVC: 2
16293669: RNCC: 5 | RNVC: 9

23 Nov 1979

5340-14-447-9999
Dashpot

144479999
299002C: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-14-270-9588
Angle Bracket

142709588
42258: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-553-1627
Mounting Bracket

145531627
0249860280: RNCC: 3 | RNVC: 2

8 Mar 2007

5340-14-323-3528
Angle Bracket

143233528
466-9M5P134: RNCC: 3 | RNVC: 2
466-9M5P134: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-499-4699
Retaining Bail

144994699
25604467: RNCC: 3 | RNVC: 2
2-560446-7: RNCC: 5 | RNVC: 2
F300 0T 022 7585: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-518-5179
Loop Clamp

145185179
NECXX000075: RNCC: 3 | RNVC: 9

9 Feb 2000

5340-14-339-7034
Access Cover

143397034
20383649-6: RNCC: 3 | RNVC: 2
383649: RNCC: 5 | RNVC: 2

18 Jan 1977

5340-14-263-8794
Loop Clamp

142638794
17-7-3494: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-464-8269
Mortise Lock Set

144648269
484A-1-56N: RNCC: 3 | RNVC: 2

1 Sep 1993

5340-14-508-5207
Bumper

145085207
18010006: RNCC: 3 | RNVC: 2
1-801000-6: RNCC: 5 | RNVC: 2

16 Sep 1998

5340-14-523-5499
Caster Frame

145235499
R101042B: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-14-531-8913
Mounting Bracket

145318913
0177700480: RNCC: 3 | RNVC: 2

25 Sep 2002

5340-14-382-6773
Angle Bracket

143826773
2235700220: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-545-8092
Clamping Catch

145458092
100002: RNCC: 3 | RNVC: 2

17 May 2005

5340-14-553-6277
Mounting Plate

145536277
T533A1121215: RNCC: 3 | RNVC: 2

25 Apr 2007

5340-14-539-5685
Mounting Bracket

145395685
10634989: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-392-3964
Retaining Clip

143923964
401MA0569F3: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-520-9543
Mounting Bracket

145209543
009963041P: RNCC: 3 | RNVC: 2

23 Jun 2000

5340-14-527-7479
Angle Bracket

145277479
708386: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-14-523-0428
Mounting Bracket

145230428
34764: RNCC: 3 | RNVC: 2

20 Dec 2000

5340-14-546-8153
Mounting Bracket

145468153
S215A3014103: RNCC: 3 | RNVC: 2

25 Aug 2005

5340-14-549-6595
Access Cover

145496595
2237777870: RNCC: 3 | RNVC: 2

26 Apr 2006

5340-14-542-3033
Mounting Plate

145423033
988739823: RNCC: 3 | RNVC: 2
988739823: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-370-6909
Access Cover

143706909
5000271159: RNCC: 3 | RNVC: 2
5000271159: RNCC: 5 | RNVC: 9

5 Jun 1981

5340-14-369-9498
Angle Bracket

143699498
398102060202: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-275-7036
Bumper

142757036
EQ64R130P28: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-519-6145
Mounting Plate

145196145
C671A4020201: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-330-9858
Angle Bracket

143309858
17124: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-554-5406
Access Cover

145545406
0074907290: RNCC: 3 | RNVC: 2

18 Jul 2007

5340-14-527-2889
Angle Bracket

145272889
EQUERRE EA POUR TI2M: RNCC: 3 | RNVC: 2

18 Oct 2001

5340-14-372-2904
Anchor Strap

143722904
120600192: RNCC: 3 | RNVC: 9

1 Sep 1981

5340-14-359-1128
Pipe Hanger

143591128
A11A532320220: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-511-2704
Protection Bellows

145112704
12156-18: RNCC: 3 | RNVC: 2

9 Dec 1998

5340-14-406-0647
Anchor Strap

144060647
1230502: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-461-6545
Mounting Plate

144616545
1027444A01: RNCC: 3 | RNVC: 2

19 Mar 1993

5340-14-369-9423
Anchor Strap

143699423
398001030001: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-540-9843
Access Cover

145409843
6531POC110: RNCC: 3 | RNVC: 2

5 May 2004

5340-14-530-3378
Lock-Release Lever

145303378
1097500: RNCC: 3 | RNVC: 2
1097500: RNCC: 5 | RNVC: 2

3 Jun 2002

5340-14-360-1649
Angle Bracket

143601649
A11A221160190A1: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-14-463-5731
Pipe Hanger

144635731
715341: RNCC: 3 | RNVC: 2
89295999: RNCC: 5 | RNVC: 2

17 Jun 1993

5340-14-391-9684
Loop Clamp

143919684
035266: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-535-2553
Cushioning Pad

145352553
6501BRG110004: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-512-5716
Mounting Plate

145125716
38427498: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-533-2363
Rod End Clevis

145332363
J107832: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-512-2771
Mounting Plate

145122771
201078: RNCC: 3 | RNVC: 2

9 Feb 1999

5340-14-545-0361
Mounting Bracket

145450361
5010514869: RNCC: 3 | RNVC: 2

16 Mar 2005

5340-14-425-7134
Bumper

144257134
006751228P: RNCC: 3 | RNVC: 2

21 Jul 1988

5340-14-455-1213
Mounting Bracket

144551213
0000663579: RNCC: 3 | RNVC: 2

1 May 1992

5340-14-307-3578
Rod End Clevis

143073578
410653: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-481-7553
Mounting Bracket

144817553
39458027: RNCC: 3 | RNVC: 2
39458027: RNCC: 5 | RNVC: 9

30 May 1996

5340-14-550-3934
Mounting Plate

145503934
2083561540: RNCC: 3 | RNVC: 2

19 Jun 2006

5340-14-550-9144
Angle Bracket

145509144
RA1M702202651: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-412-8056
Access Cover

144128056
7234670008: RNCC: 3 | RNVC: 2
72346700: RNCC: 5 | RNVC: 2

5 Nov 1986

5340-14-450-2155
Bumper

144502155
5000536600: RNCC: 3 | RNVC: 2
5000536600: RNCC: 5 | RNVC: 9

25 Sep 1991

5340-14-322-3605
Mounting Plate

143223605
M427553: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-405-3442
Angle Bracket

144053442
4771520320: RNCC: 3 | RNVC: 2
313502: RNCC: 3 | RNVC: 2
8310000: RNCC: 5 | RNVC: 2

27 Nov 1985

5340-14-487-5605
Pipe Hanger

144875605
RA1M701272031: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-451-9444
Angle Bracket

144519444
007557010P: RNCC: 3 | RNVC: 2

12 Dec 1991

5340-14-377-3741
Clamping Catch

143773741
AMG250069: RNCC: 3 | RNVC: 2

17 May 1982

5340-14-506-8096
Protection Bellows

145068096
18310004: RNCC: 3 | RNVC: 2

20 May 1998

5340-14-450-6875
Synchro Clamp

144506875
18341: RNCC: 3 | RNVC: 2
91461417: RNCC: 5 | RNVC: 2

16 Oct 1991

5340-14-381-2487
Retaining Strap

143812487
71190: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-484-1038
Detent Plunger

144841038
M421573A1417A01: RNCC: 3 | RNVC: 2

24 Oct 1996

5340-14-405-0489
Loop Clamp

144050489
C0100: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-370-5360
Mounting Plate

143705360
16759498: RNCC: 3 | RNVC: 2
16759498: RNCC: 5 | RNVC: 2
16759498: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-458-8762
Mounting Plate

144588762
20707017: RNCC: 3 | RNVC: 2

5 Nov 1992

5340-14-442-2034
Angle Bracket

144422034
16787840: RNCC: 3 | RNVC: 2
16787840: RNCC: 5 | RNVC: 9

3 Oct 1990

5340-14-258-0667
Retaining Band

142580667
F109090: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-554-3317
Mounting Bracket

145543317
82116292000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-480-0478
Mounting Plate

144800478
10259716: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-461-7411
Mounting Plate

144617411
19294556: RNCC: 3 | RNVC: 2
19294556: RNCC: 5 | RNVC: 2

24 Mar 1993

5340-14-459-3786
Section Block Clamp

144593786
16787432: RNCC: 3 | RNVC: 2
16787432: RNCC: 5 | RNVC: 9

26 Nov 1992

5340-14-509-2290
Mounting Bracket

145092290
46944309: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-459-1466
Runner

144591466
16787556: RNCC: 3 | RNVC: 2
16787556: RNCC: 5 | RNVC: 9

19 Nov 1992

5340-14-505-6241
Loop Clamp

145056241
E22501000020: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-482-7815
Mounting Plate

144827815
1089240L00: RNCC: 3 | RNVC: 2

25 Jul 1996

5340-14-210-6597
Retaining Strap

142106597
0000121724: RNCC: 3 | RNVC: 2
0000121724: RNCC: 5 | RNVC: 9
121724: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-314-4718
Flush Catch Claw

143144718
156358: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-515-2418
Angle Bracket

145152418
3535150801: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-453-8573
Webbing Strap

144538573
PAL01PD000027: RNCC: 3 | RNVC: 9

12 Mar 1992

5340-14-369-7616
Angle Bracket

143697616
A11A211107029: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-525-5528
Mounting Plate

145255528
7700586011: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-551-3425
Angle Bracket

145513425
RA1M701126811A1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-433-6486
Mounting Bracket

144336486
0411-10007: RNCC: 3 | RNVC: 2

2 Aug 1989

5340-14-259-4659
Rod End Clevis

142594659
2-04934: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-279-6399
Rim Lock

142796399
28DD0RE4262CHR0ME40MM: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-330-3688
Mounting Bracket

143303688
196868: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-295-2893
Mounting Bracket

142952893
NO PRIMARY REF 14-295-2893: RNCC: 3 | RNVC: 2
80362: RNCC: 5 | RNVC: 9
00-360-7960: RNCC: 6 | RNVC: 9

1 Jan 1973

5340-14-526-4747
Angle Bracket

145264747
78701-033A: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-445-6572
Clamping Catch

144456572
700300004030: RNCC: 3 | RNVC: 2

20 Feb 1991

Load More Results