What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 120 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 120 of 446

5340-14-527-1434
Angle Bracket

145271434
876145: RNCC: 3 | RNVC: 2
SYB4147: RNCC: 5 | RNVC: 2
876145-4: RNCC: 5 | RNVC: 2
876145: RNCC: 5 | RNVC: 9

5 Oct 2001

5340-14-356-6690
Retaining Strap

143566690
EA1M792-23-01: RNCC: 3 | RNVC: 2

15 May 1979

5340-14-379-7080
Quick Release Pin

143797080
3407-21-05: RNCC: 3 | RNVC: 2
3407-21-05C: RNCC: 5 | RNVC: 2
RAB9183: RNCC: 5 | RNVC: 2

20 Oct 1982

5340-14-470-0497
Bumper

144700497
A02647-01-0000P010: RNCC: 3 | RNVC: 2

25 May 1994

5340-14-413-1553
Mounting Plate

144131553
23118943-6: RNCC: 3 | RNVC: 2
23118943: RNCC: 5 | RNVC: 2

26 Nov 1986

5340-14-550-9577
Rod End Connector

145509577
CLS-12: RNCC: 3 | RNVC: 2

2 Aug 2006

5340-14-280-0441
Rod End Connector

142800441
79526-462: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-348-3588
Anchor Strap

143483588
57309-100-1: RNCC: 3 | RNVC: 9
527443: RNCC: 5 | RNVC: 9

29 Mar 1978

5340-14-502-3161
Pawl Fastener

145023161
160-61943: RNCC: 3 | RNVC: 2

9 Dec 1997

5340-14-402-6591
Quick Release Pin

144026591
211719: RNCC: 3 | RNVC: 2

19 Jul 1985

5340-14-462-9481
Tee Hinge

144629481
C9A6C99: RNCC: 3 | RNVC: 2

11 May 1993

5340-14-466-3119
Mounting Bracket

144663119
27113721-6: RNCC: 3 | RNVC: 2

3 Nov 1993

5340-14-301-0041
Angle Bracket

143010041
121A71-270-52-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-479-3456
Tee Hinge

144793456
AT004PD0051027: RNCC: 3 | RNVC: 9

10 Jan 1996

5340-14-502-0322
Loop Clamp

145020322
102,5-706R: RNCC: 3 | RNVC: 2

26 Nov 1997

5340-14-548-6096
Pipe Hanger

145486096
RA1B70220831A1: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-258-1266
Loop Clamp

142581266
L102499: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-515-6017
Vent Plug

145156017
SES3S: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-381-5208
Rod End Connector

143815208
208789: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-524-4572
Butt Hinge

145244572
85.7.1904: RNCC: 3 | RNVC: 2
SYB2178: RNCC: 5 | RNVC: 2

21 Mar 2001

5340-14-551-3310
Snap Hook

145513310
FAHK5 044 04 P3 06 01 A: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-435-1057
Angle Bracket

144351057
3005257: RNCC: 3 | RNVC: 2

18 Oct 1989

5340-14-346-2691
Mounting Bracket

143462691
300-677-702P: RNCC: 3 | RNVC: 2
001283020A: RNCC: 5 | RNVC: 2

12 Dec 1977

5340-14-525-2718
Mounting Bracket

145252718
1302118S030: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-525-2730
Loop Clamp

145252730
10444596: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-366-4408
Mounting Plate

143664408
0000773075: RNCC: 3 | RNVC: 2
0000773075: RNCC: 5 | RNVC: 9
773075: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-428-2171
Access Cover

144282171
000202457900: RNCC: 3 | RNVC: 2

7 Dec 1988

5340-14-348-0283
Access Cover

143480283
1044374: RNCC: 3 | RNVC: 2
1044374: RNCC: 5 | RNVC: 2

29 Mar 1978

5340-14-371-2609
Angle Bracket

143712609
A26051340: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-394-9217
Mounting Plate

143949217
20733611: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-445-5052
Mounting Bracket

144455052
ST406M52P71: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-14-211-0791
Mending Plate

142110791
17086: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-432-9015
Shelf Bracket

144329015
2316318: RNCC: 3 | RNVC: 2

30 Jun 1989

5340-14-518-9124
Mounting Bracket

145189124
MB3107F00: RNCC: 3 | RNVC: 2

28 Feb 2000

5340-14-504-9917
Compression Cup

145049917
5000670748: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-552-4737
Block Clamp

145524737
S881A9801204: RNCC: 3 | RNVC: 2

8 Jan 2007

5340-14-266-2131
Angle Bracket

142662131
450638: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-529-4788
Mounting Plate

145294788
GA65954: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-550-9043
Angle Bracket

145509043
RA1A701222031N1: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-504-2346
Loop Clamp

145042346
3478344M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-246-1891
Retaining Strap

142461891
28689: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-474-2920
Door Handle

144742920
AT004PD005212: RNCC: 3 | RNVC: 9

8 Feb 1995

5340-14-476-0488
Cushioning Pad

144760488
5000502673: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-484-2833
Mounting Bracket

144842833
491 PP ESC TOOL: RNCC: 3 | RNVC: 2

31 Oct 1996

5340-14-343-1710
Retaining Strap

143431710
532519: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-14-455-7734
Plate Spacer

144557734
39253143: RNCC: 3 | RNVC: 2
39253143: RNCC: 3 | RNVC: 9
5045111: RNCC: 5 | RNVC: 9

11 Jun 1992

5340-14-328-7528
Access Cover

143287528
1030890017: RNCC: 3 | RNVC: 2
1030890017: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-520-1692
Compression Cup

145201692
39253394: RNCC: 3 | RNVC: 2
39253394: RNCC: 3 | RNVC: 9

17 May 2000

5340-14-340-2315
Loop Clamp

143402315
TH20N278: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-474-6728
Runner

144746728
45583804: RNCC: 3 | RNVC: 9

22 Feb 1995

5340-14-263-4258
Retaining Band

142634258
R603397: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-422-5706
Angle Bracket

144225706
4772102710: RNCC: 3 | RNVC: 2

10 Mar 1988

5340-14-031-1042
Angle Bracket

140311042
705442174: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-286-5227
Access Cover

142865227
79026280: RNCC: 3 | RNVC: 2
79026280: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-529-4541
Rod End Clevis

145294541
9401COE122: RNCC: 3 | RNVC: 2
9401COE122000: RNCC: 5 | RNVC: 2

29 Mar 2002

5340-14-483-4112
Angle Bracket

144834112
SCH34A: RNCC: 3 | RNVC: 2
SCH34A: RNCC: 5 | RNVC: 2

12 Sep 1996

5340-14-486-1961
Mounting Bracket

144861961
4SH11806307: RNCC: 3 | RNVC: 2
11806307B: RNCC: 5 | RNVC: 2

5 Mar 1997

5340-14-448-9794
Mounting Bracket

144489794
BAZ4407: RNCC: 3 | RNVC: 2

24 Jul 1991

5340-14-416-1902
Bow Handle

144161902
M8PR1: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-371-3863
Slide Keeper

143713863
81H9125: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-520-4575
Buckle

145204575
523550: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-521-4273
Loop Clamp

145214273
930175: RNCC: 3 | RNVC: 2
00920107: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-14-530-3230
Mounting Bracket

145303230
39023931: RNCC: 3 | RNVC: 2

29 May 2002

5340-14-503-5897
Mounting Bracket

145035897
47135135: RNCC: 3 | RNVC: 2

21 Jan 1998

5340-14-436-2037
Mounting Plate

144362037
DA2C228553A1: RNCC: 3 | RNVC: 2

6 Dec 1989

5340-14-519-6024
Cover Strip

145196024
C561A1101101: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-473-8234
Mounting Bracket

144738234
332A32-3454-20: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-325-2457
Angle Bracket

143252457
E4M703-27-90-01: RNCC: 3 | RNVC: 2
85-686-4599: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-501-4524
Pipe Hanger

145014524
307-849-703-0: RNCC: 3 | RNVC: 2

29 Oct 1997

5340-14-517-5732
Pipe Hanger

145175732
78732-032-036B: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-520-3980
Metal Grille

145203980
CS2-0.000.270: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-315-7192
Retaining Strap

143157192
321A60-4604-20: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-426-2132
Loop Clamp

144262132
E307-210: RNCC: 3 | RNVC: 2

4 Aug 1988

5340-14-381-5070
Bumper

143815070
9313-05: RNCC: 3 | RNVC: 2
7903077060: RNCC: 5 | RNVC: 2
877060: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-351-8689
Bail Handle

143518689
73-042-989: RNCC: 3 | RNVC: 2

16 Oct 1978

5340-14-264-1735
Loop Clamp

142641735
55218-240D507ADL: RNCC: 3 | RNVC: 2
55218-240-001ADL: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-031-7784
Webbing Strap

140317784
16299770: RNCC: 1 | RNVC: 2
044U02-20978P: RNCC: 3 | RNVC: 2
0904466M00: RNCC: 5 | RNVC: 2
16299770: RNCC: 5 | RNVC: 9

5 Jul 1980

5340-14-422-2802
Rod End Connector

144222802
99.87.4.10: RNCC: 3 | RNVC: 2

24 Feb 1988

5340-14-550-3456
Flush Lock

145503456
RL5504 + CLE 3055: RNCC: 3 | RNVC: 2

16 Jun 2006

5340-14-423-9139
Flush Lock

144239139
1152: RNCC: 3 | RNVC: 2
COMO1152: RNCC: 5 | RNVC: 9

5 May 1988

5340-14-482-7212
Mortise Latch

144827212
1100099Y00: RNCC: 3 | RNVC: 2

25 Jul 1996

5340-14-455-5029
Anchor Strap

144555029
MP010REP24: RNCC: 3 | RNVC: 2
MP1024: RNCC: 5 | RNVC: 2

26 May 1992

5340-14-552-6169
Webbing Strap

145526169
GENE E 290001A: RNCC: 3 | RNVC: 2

18 Jan 2007

5340-14-479-5782
Access Cover

144795782
23243865-1: RNCC: 3 | RNVC: 2

24 Jan 1996

5340-14-507-9929
Access Door Hinge

145079929
14-7-3418: RNCC: 3 | RNVC: 2
8921600086: RNCC: 5 | RNVC: 9

26 Aug 1998

5340-14-502-7197
Screw Hook

145027197
1167121: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-401-5371
Angle Bracket

144015371
620607: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-479-7130
Anchor Strap

144797130
23627339-0: RNCC: 3 | RNVC: 2

31 Jan 1996

5340-14-200-3640
Retaining Band

142003640
AMG7416-3: RNCC: 3 | RNVC: 2
7416-3: RNCC: 5 | RNVC: 2
7416-3: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-14-489-5127
Mounting Bracket

144895127
10047719: RNCC: 3 | RNVC: 2
F300 0T 022 7505: RNCC: 6 | RNVC: 9

30 Jul 1997

5340-14-376-9981
Butt Hinge

143769981
48-7714M1P8: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-542-3459
Mounting Bracket

145423459
10653376: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-14-350-5113
Butt Hinge

143505113
45371: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-439-6294
Loop Clamp

144396294
511153050122: RNCC: 3 | RNVC: 2
55S12: RNCC: 5 | RNVC: 2

16 May 1990

5340-14-471-0491
Permanent Magnet

144710491
IS4N: RNCC: 3 | RNVC: 2

20 Jul 1994

5340-14-445-2514
Retaining Strap

144452514
233298K: RNCC: 3 | RNVC: 2

6 Feb 1991

5340-14-438-6763
Plate Spacer

144386763
C2972C: RNCC: 3 | RNVC: 2

28 Mar 1990

5340-14-336-7293
Bow Handle

143367293
195653: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-360-3190
Locking Stay

143603190
5000110950: RNCC: 3 | RNVC: 2
5000110950: RNCC: 5 | RNVC: 9

23 Nov 1979

5340-14-509-9156
Door Hook

145099156
83623G: RNCC: 3 | RNVC: 2
5340AA1104402: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-500-6199
Block Fairlead

145006199
C63903100000: RNCC: 3 | RNVC: 2
F300 0T 024 6383: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-401-3533
Angle Bracket

144013533
20328526: RNCC: 3 | RNVC: 2
20328526: RNCC: 5 | RNVC: 9

5 Jun 1985

5340-14-437-6060
Cover Strip

144376060
PM1A121114018: RNCC: 3 | RNVC: 2
PM1A121114018: RNCC: 5 | RNVC: 2

7 Feb 1990

5340-14-422-6375
Detent Plunger

144226375
258382: RNCC: 3 | RNVC: 2

10 Mar 1988

5340-14-554-3133
Mounting Bracket

145543133
T537A2001144: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-437-6090
Cover Strip

144376090
PM1A121211028: RNCC: 3 | RNVC: 2
PM1A121211028: RNCC: 5 | RNVC: 2

7 Feb 1990

5340-14-515-3352
Mounting Plate

145153352
3534411100: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-524-8165
Retaining Strap

145248165
8000887G00: RNCC: 3 | RNVC: 2

18 Apr 2001

5340-14-450-2650
Detent Plunger

144502650
PM1A241525103: RNCC: 3 | RNVC: 2
PM1A241525103: RNCC: 5 | RNVC: 2

25 Sep 1991

5340-14-315-9639
Key Blank

143159639
45X70X240ACB165: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-454-5222
Mounting Bracket

144545222
DE4E53453: RNCC: 3 | RNVC: 2
89280127: RNCC: 5 | RNVC: 2
DE4E53453: RNCC: 5 | RNVC: 9

2 Apr 1992

5340-14-456-1408
Butt Hinge

144561408
5000421746: RNCC: 3 | RNVC: 2

18 Jun 1992

5340-14-363-0934
Butt Hinge

143630934
CC406ZB: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-14-412-8918
Support Hook

144128918
050C67-687962N: RNCC: 3 | RNVC: 2

5 Nov 1986

5340-14-400-0939
Angle Bracket

144000939
217732: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-398-8052
Angle Bracket

143988052
5000497849: RNCC: 3 | RNVC: 2
5000497849: RNCC: 5 | RNVC: 9

20 Feb 1985

5340-14-448-1329
Mounting Bracket

144481329
012072190102: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-14-430-7180
Block Clamp

144307180
PM1A745149020: RNCC: 3 | RNVC: 2
PM1A745149020: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-332-2241
Retaining Strap

143322241
193509: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-554-3506
Mounting Bracket

145543506
82173251000: RNCC: 3 | RNVC: 2

22 Jun 2007

5340-14-430-5077
Butt Hinge

144305077
PM1A125810041: RNCC: 3 | RNVC: 2
PM1A125810041: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-501-8910
Mounting Bracket

145018910
38222636: RNCC: 3 | RNVC: 2
38222636: RNCC: 5 | RNVC: 9

19 Nov 1997

5340-14-388-8190
Loop Clamp

143888190
24502-250: RNCC: 3 | RNVC: 2
5171711600: RNCC: 5 | RNVC: 2
722178: RNCC: 5 | RNVC: 9
717116: RNCC: 5 | RNVC: 9

29 Nov 1983

5340-14-442-1675
Retaining Strap

144421675
16588031: RNCC: 3 | RNVC: 2

3 Oct 1990

5340-14-305-3588
Angle Bracket

143053588
561016: RNCC: 3 | RNVC: 2
5156101600: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-553-5224
Mounting Bracket

145535224
21053580: RNCC: 3 | RNVC: 2
5010636952: RNCC: 5 | RNVC: 2

12 Apr 2007

5340-14-252-1462
Loop Clamp

142521462
12508601: RNCC: 3 | RNVC: 2
12508601: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-408-2614
Loop Clamp

144082614
79067431: RNCC: 3 | RNVC: 2
79067431: RNCC: 5 | RNVC: 9

19 Mar 1986

5340-14-453-4394
Retaining Strap

144534394
559859: RNCC: 3 | RNVC: 2

19 Feb 1992

5340-14-393-7835
Angle Bracket

143937835
F0316BBC1: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-439-2916
Cover Strip

144392916
DA2C261035043: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-441-5896
Mounting Bracket

144415896
E05400308: RNCC: 3 | RNVC: 2

4 Sep 1990

5340-14-439-4035
Plate Spacer

144394035
PM1A196100018: RNCC: 3 | RNVC: 2
PM1A196100018: RNCC: 5 | RNVC: 2

25 Apr 1990

5340-14-543-4499
Mounting Plate

145434499
AL100583: RNCC: 3 | RNVC: 2

30 Oct 2004

5340-14-202-3138
Loop Clamp

142023138
STD58: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-548-0957
Runner

145480957
RA1M701636831A1N1: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-417-6645
Mounting Plate

144176645
2500053: RNCC: 3 | RNVC: 2

22 Jul 1987

5340-14-508-1324
Butt Hinge

145081324
10209960: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-433-4004
Loop Clamp

144334004
5000921140: RNCC: 3 | RNVC: 2

25 Jul 1989

5340-14-501-5841
Mounting Plate

145015841
8002468N00: RNCC: 3 | RNVC: 2

5 Nov 1997

5340-14-399-9687
Retaining Strap

143999687
230281: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-513-3858
Angle Bracket

145133858
DE33331: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-14-389-3990
Loop Clamp

143893990
43532: RNCC: 3 | RNVC: 2
43532: RNCC: 5 | RNVC: 9

20 Dec 1983

5340-14-450-5009
Bumper

144505009
5000988287: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-14-508-7965
Metal Grille

145087965
JVJT122005: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-14-553-6873
Mounting Bracket

145536873
82181982000: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-403-7205
Access Cover

144037205
414004: RNCC: 3 | RNVC: 2
414004: RNCC: 5 | RNVC: 2
414004: RNCC: 5 | RNVC: 9

21 Aug 1985

5340-14-471-5219
Loop Clamp

144715219
40-6-4A5-48: RNCC: 3 | RNVC: 2
89165038: RNCC: 5 | RNVC: 2
40-6-4A5-48: RNCC: 5 | RNVC: 9

31 Aug 1994

5340-14-449-1006
Detent Plunger

144491006
A03037-10-2100P003: RNCC: 3 | RNVC: 2

24 Jul 1991

5340-14-399-7567
Pipe Hanger

143997567
4-444-00P10-01M: RNCC: 3 | RNVC: 2

14 Mar 1985

5340-14-352-5476
Access Cover

143525476
78740A25-48-70: RNCC: 3 | RNVC: 2
A11A221260035: RNCC: 5 | RNVC: 2

16 Oct 1978

5340-14-455-8995
Metal Grille

144558995
PM1A656206100: RNCC: 3 | RNVC: 2
PM1A656206100: RNCC: 5 | RNVC: 2
85-694-6818: RNCC: 6 | RNVC: 9

11 Jun 1992

5340-14-377-1242
Anchor Strap

143771242
AZ564-68: RNCC: 3 | RNVC: 2

17 May 1982

5340-14-477-1146
Mounting Plate

144771146
ST-3547: RNCC: 3 | RNVC: 9
1110579N00: RNCC: 5 | RNVC: 2

26 Jul 1995

5340-14-369-2858
Synchro Clamp

143692858
S2363: RNCC: 3 | RNVC: 2
S2363-1DG: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-474-9596
Runner

144749596
121-1000-90: RNCC: 3 | RNVC: 2

15 Mar 1995

5340-14-408-5286
Runner

144085286
23108767-4: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-269-9001
Synchro Clamp

142699001
NO PRIMARY REF14-269-9001: RNCC: 3 | RNVC: 2
442506-38537-701J591: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-293-9845
Control Rod

142939845
GSM173-09REP8: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-279-7505
Rod End Connector

142797505
521256: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-473-2042
Mounting Plate

144732042
P109454: RNCC: 3 | RNVC: 2
89473590: RNCC: 5 | RNVC: 2

7 Dec 1994

5340-14-043-1432
Bumper

140431432
065U20-719586Y: RNCC: 3 | RNVC: 2

10 Apr 1984

5340-14-503-2539
Spring Holder

145032539
0298182590: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-372-2947
Access Cover

143722947
1571990008: RNCC: 3 | RNVC: 2
7701000319: RNCC: 5 | RNVC: 2
15719900: RNCC: 5 | RNVC: 2
7701000319: RNCC: 5 | RNVC: 9

1 Sep 1981

5340-14-399-9688
Retaining Strap

143999688
230282: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-515-2441
Access Cover

145152441
5153011636: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-509-6799
Protection Bellows

145096799
RA1M705232201: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-031-9044
Rod End Clevis

140319044
223536Y: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-226-5219
Rod End Clevis

142265219
383076: RNCC: 3 | RNVC: 2
40996: RNCC: 5 | RNVC: 2
062057710: RNCC: 5 | RNVC: 9
57710: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-274-5881
Loop Clamp

142745881
H10P: RNCC: 3 | RNVC: 2
494309: RNCC: 5 | RNVC: 2
0146334T00: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-500-5378
Access Cover

145005378
5706-8700: RNCC: 3 | RNVC: 2
F300 0T 024 5554: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-466-1107
Access Cover

144661107
155B3003: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-14-226-2719
Mending Plate

142262719
0036331: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-409-6914
Loop Clamp

144096914
DAS076: RNCC: 3 | RNVC: 2
ATP20A: RNCC: 5 | RNVC: 2

28 May 1986

5340-14-461-1394
Mounting Bracket

144611394
51171740013: RNCC: 3 | RNVC: 2

24 Feb 1993

5340-14-235-2207
Rod End Clevis

142352207
STA156881: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-533-2603
Access Cover

145332603
V116036B: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-536-5812
Angle Bracket

145365812
OB2870: RNCC: 3 | RNVC: 2

2 Sep 2003

5340-14-556-0268
Access Cover

145560268
0319734160: RNCC: 3 | RNVC: 2

22 Jan 2008

5340-14-542-9971
Utility Access Door

145429971
PZ1808A01: RNCC: 3 | RNVC: 9

18 Aug 2004

5340-14-392-0990
Rod End Clevis

143920990
8811287027: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-470-6734
Access Cover

144706734
EDM0559: RNCC: 3 | RNVC: 2
91363513: RNCC: 5 | RNVC: 2

29 Jun 1994

5340-14-464-2569
Runner

144642569
SMCFAATC0037B: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-529-9554
Loop Clamp

145299554
6005022637: RNCC: 3 | RNVC: 2
6005022637: RNCC: 5 | RNVC: 2

24 Apr 2002

5340-14-501-0632
Expansion Shield

145010632
6350: RNCC: 3 | RNVC: 2
91642487: RNCC: 5 | RNVC: 2
F300 0T 025 0964: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-550-6572
Access Cover

145506572
45284515: RNCC: 3 | RNVC: 2

6 Jul 2006

5340-14-528-4392
Angle Bracket

145284392
5804639J01: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-224-8853
Bumper

142248853
GSM1674A13: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-392-5352
Retaining Strap

143925352
254452: RNCC: 3 | RNVC: 2
254452: RNCC: 5 | RNVC: 9

21 Mar 1984

5340-14-523-4938
Cover Strip

145234938
01-250-460: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-14-500-6279
Mounting Bracket

145006279
06410P019000: RNCC: 3 | RNVC: 2
F300 0T 024 6464: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-377-0957
Loop Clamp

143770957
0947651129: RNCC: 3 | RNVC: 2
947651129: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-308-6463
Angle Bracket

143086463
0235101140: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-342-5373
Bow Handle

143425373
A11A261100036U1: RNCC: 3 | RNVC: 2

16 May 1977

5340-14-500-5451
Mounting Bracket

145005451
6887: RNCC: 3 | RNVC: 2
F300 0T 024 5627: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-392-8595
Access Cover

143928595
225193: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-250-3281
Retaining Strap

142503281
ST406M52P598: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-470-4780
Access Cover

144704780
50-520616A: RNCC: 3 | RNVC: 2

22 Jun 1994

5340-14-548-6119
Mounting Bracket

145486119
RA1A704816031: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-549-9225
Block Clamp

145499225
14142: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-431-5053
Angle Bracket

144315053
160G722016-39: RNCC: 3 | RNVC: 2

19 Apr 1989

5340-14-551-3538
Angle Bracket

145513538
RA1A703916121N1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-399-1067
Angle Bracket

143991067
640553: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-504-1776
Access Cover

145041776
1508880M91: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-336-6925
Retaining Strap

143366925
193380: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-418-9238
Rod End Clevis

144189238
DA2C111317834U1: RNCC: 3 | RNVC: 2

16 Sep 1987

5340-14-439-6746
Mounting Bracket

144396746
16379521: RNCC: 3 | RNVC: 2
16379521: RNCC: 5 | RNVC: 9

16 May 1990

5340-14-361-6781
Anchor Strap

143616781
5000497690: RNCC: 3 | RNVC: 2
5000497690: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-14-511-0834
Lock Key

145110834
G9233: RNCC: 3 | RNVC: 9

2 Dec 1998

5340-14-349-3211
Access Cover

143493211
0000387354: RNCC: 3 | RNVC: 2
0000387354: RNCC: 5 | RNVC: 9
387354: RNCC: 5 | RNVC: 9

22 May 1978

5340-14-460-8480
Access Cover

144608480
39704C: RNCC: 3 | RNVC: 2

10 Feb 1993

5340-14-528-0322
Bow Handle

145280322
56149492: RNCC: 3 | RNVC: 2

12 Dec 2001

5340-14-523-2315
Access Cover

145232315
P609467: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-441-1034
Handwheel

144411034
16766485: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-273-9015
Control Rod

142739015
122720: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-297-4605
Rim Lock Set

142974605
1104-30CAME911-80CHR0ME: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-552-1671
Support Hook

145521671
F1451369: RNCC: 3 | RNVC: 2

29 Nov 2006

5340-14-501-0863
Metal Grille

145010863
39481037: RNCC: 3 | RNVC: 2
F300 0T 025 1204: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-500-5227
Mounting Bracket

145005227
30828: RNCC: 3 | RNVC: 2
F300 0T 024 5400: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-534-8527
Mounting Plate

145348527
10620097: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-14-522-1249
Mounting Bracket

145221249
276940: RNCC: 3 | RNVC: 2

4 Oct 2000

5340-14-384-7830
Mounting Plate

143847830
16759479: RNCC: 3 | RNVC: 2
16759479: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-552-0558
Runner

145520558
0249921040: RNCC: 3 | RNVC: 2

22 Nov 2006

5340-14-359-6393
Angle Bracket

143596393
0000706000: RNCC: 3 | RNVC: 2
0000706000: RNCC: 5 | RNVC: 9
706000: RNCC: 5 | RNVC: 9

15 Oct 1979

5340-14-436-4645
Plug Button

144364645
303-067-001-0: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-545-0645
Mounting Bracket

145450645
ZL2420: RNCC: 3 | RNVC: 2

16 Mar 2005

5340-14-350-2858
Retaining Strap

143502858
09512085733: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-535-2837
Loop Clamp

145352837
EN4113S38NH: RNCC: 2 | RNVC: 2
215303800: RNCC: 3 | RNVC: 2
21S38: RNCC: 5 | RNVC: 2

14 May 2003

5340-14-276-8844
Retaining Strap

142768844
52570: RNCC: 3 | RNVC: 9

1 Jan 1971

5340-14-502-7737
Compression Cup

145027737
6V4636: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-422-9166
Loop Clamp

144229166
259170: RNCC: 3 | RNVC: 2

24 Mar 1988

5340-14-370-5192
Mending Plate

143705192
970721: RNCC: 3 | RNVC: 2
970721: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-541-8429
Mounting Bracket

145418429
F1263246: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-407-8045
Runner

144078045
0249831750: RNCC: 3 | RNVC: 2

5 Mar 1986

5340-14-401-3770
Mounting Plate

144013770
BC64516B2: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-290-2054
Access Cover

142902054
0260620450: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-443-7293
Mending Plate

144437293
AMG255384: RNCC: 3 | RNVC: 2
255384: RNCC: 5 | RNVC: 2

5 Dec 1990

5340-14-437-0949
Rod End Clevis

144370949
DZK4D5J111: RNCC: 3 | RNVC: 2

17 Jan 1990

5340-14-403-9198
Anchor Strap

144039198
40012433: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-483-7233
Mounting Plate

144837233
0064762540: RNCC: 3 | RNVC: 2

27 Sep 1996

5340-14-543-3240
Mounting Bracket

145433240
10623146: RNCC: 3 | RNVC: 2

20 Oct 2004

5340-14-485-9665
Metal Grille

144859665
1042577M00: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-14-526-2969
Mounting Bracket

145262969
10630085: RNCC: 3 | RNVC: 2

18 Jul 2001

5340-14-338-7691
Rod End Connector

143387691
VITH20-18200: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-350-0015
Retaining Strap

143500015
51490-252-1: RNCC: 3 | RNVC: 9

14 Jun 1978

5340-14-370-8720
Angle Bracket

143708720
303-932-902-0: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-472-5979
Access Cover

144725979
410028: RNCC: 3 | RNVC: 2
410028-100: RNCC: 5 | RNVC: 9

3 Nov 1994

5340-14-404-1263
Butt Hinge

144041263
0517-02-07-24: RNCC: 3 | RNVC: 2
0527-02-07-24: RNCC: 5 | RNVC: 2

11 Sep 1985

5340-14-450-1325
Loop Clamp

144501325
304-068-303-0: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-257-1468
Cover Strip

142571468
330A25-2201-58: RNCC: 3 | RNVC: 2
330A25-2201-5800: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-504-0759
Loop Clamp

145040759
CS2-0.000,234: RNCC: 3 | RNVC: 2

5 Feb 1998

5340-14-336-8048
Angle Bracket

143368048
NO PRIMARY REF14-336-8048: RNCC: 3 | RNVC: 2
13630720: RNCC: 5 | RNVC: 9

7 Oct 1976

5340-14-432-7375
Loop Clamp

144327375
512131050501: RNCC: 3 | RNVC: 2
30G50: RNCC: 5 | RNVC: 2

21 Jun 1989

5340-14-458-9243
Mounting Plate

144589243
100A107462: RNCC: 3 | RNVC: 2

5 Nov 1992

5340-14-534-8488
Mounting Bracket

145348488
10665801000: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-14-522-4368
Mounting Bracket

145224368
10330473: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-14-540-7407
Mounting Plate

145407407
38052134: RNCC: 3 | RNVC: 2
440387: RNCC: 5 | RNVC: 2
4848ZG8613181568: RNCC: 6 | RNVC: 9

23 Apr 2004

5340-14-421-2352
Angle Bracket

144212352
613006: RNCC: 3 | RNVC: 2
C200: RNCC: 3 | RNVC: 2
102123: RNCC: 3 | RNVC: 9

11 Jan 1988

5340-14-422-9164
Retaining Strap

144229164
258099: RNCC: 3 | RNVC: 2

24 Mar 1988

5340-14-547-8293
Mounting Bracket

145478293
V000854: RNCC: 3 | RNVC: 2

17 Nov 2005

5340-14-350-8968
Rod End Clevis

143508968
CHAPEDE14MM: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-506-9314
Mounting Plate

145069314
14 229525 00A: RNCC: 3 | RNVC: 2

27 May 1998

5340-14-559-2986
Utility Resilient Mount

145592986
10617364: RNCC: 3 | RNVC: 2

17 Dec 2008

5340-14-527-9175
Access Cover

145279175
29418760: RNCC: 3 | RNVC: 2

28 Nov 2001

5340-14-547-4026
Mounting Bracket

145474026
0000040019: RNCC: 3 | RNVC: 2

12 Oct 2005

5340-14-351-9911
Access Cover

143519911
32298: RNCC: 3 | RNVC: 2

16 Oct 1978

5340-14-031-9795
Rod End Clevis

140319795
CF1A11171: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-381-4317
Anchor Strap

143814317
909532004: RNCC: 3 | RNVC: 2
909532004: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-202-3145
Loop Clamp

142023145
STD158: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-469-6586
Rod End Clevis

144696586
A11A216200121: RNCC: 3 | RNVC: 2

4 May 1994

5340-14-515-7224
Access Cover

145157224
F10A270100160A1: RNCC: 3 | RNVC: 2

28 Jul 1999

5340-14-409-0474
Rod End Clevis

144090474
3076651: RNCC: 3 | RNVC: 2
3076651: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-379-7356
Anchor Strap

143797356
2206-331B506: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-437-7637
Access Cover

144377637
3068004: RNCC: 3 | RNVC: 2
3068004: RNCC: 5 | RNVC: 2

19 Feb 1990

5340-14-305-3692
Rod End Clevis

143053692
160179: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-547-5777
Access Cover

145475777
PAP02166: RNCC: 3 | RNVC: 2

17 Oct 2005

5340-14-461-2660
Access Cover

144612660
C3291AAB19: RNCC: 3 | RNVC: 2
5046599: RNCC: 5 | RNVC: 9
C3291AAB19: RNCC: 5 | RNVC: 9

3 Mar 1993

5340-14-472-3533
Access Cover

144723533
1087884B00: RNCC: 3 | RNVC: 2

19 Oct 1994

5340-14-505-0417
Runner

145050417
5010341255: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-381-3527
Anchor Strap

143813527
0000663055: RNCC: 3 | RNVC: 2
0000663055: RNCC: 5 | RNVC: 9
663055: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-485-8657
Anchor Strap

144858657
10482903: RNCC: 3 | RNVC: 2
10023159: RNCC: 5 | RNVC: 2

19 Feb 1997

5340-14-551-6080
Access Cover

145516080
4CW2203: RNCC: 3 | RNVC: 2

9 Oct 2006

5340-14-511-6634
Rod End Clevis

145116634
6443003: RNCC: 3 | RNVC: 2

8 Jan 1999

5340-14-278-5293
Rod End Clevis

142785293
10100087: RNCC: 3 | RNVC: 2
CHR10100087: RNCC: 5 | RNVC: 2
10100087: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-452-6545
Plug Button

144526545
A88561: RNCC: 3 | RNVC: 2

15 Jan 1992

5340-14-396-4853
Locking Stay

143964853
065T13-727819F: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-400-0864
Rod End Clevis

144000864
214645: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-533-8321
Utility Access Door

145338321
46945073: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-522-3212
Access Cover

145223212
10473159: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-14-351-2067
Access Cover

143512067
212447: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-441-7122
Loop Clamp

144417122
ASNA0021-21P10: RNCC: 3 | RNVC: 2
A0021-21P10: RNCC: 5 | RNVC: 2

12 Sep 1990

5340-14-496-9233
Bow Handle

144969233
621-112: RNCC: 3 | RNVC: 2
F300 0T 022 2731: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-521-2473
Plug Button

145212473
350A75-2059-01: RNCC: 3 | RNVC: 2

12 Jul 2000

5340-14-335-0504
Handwheel

143350504
MAT137-003F5AVIORB: RNCC: 3 | RNVC: 2
GSM137-007F17AVI0RB: RNCC: 5 | RNVC: 2
GSM137-07F17AVI0RB: RNCC: 5 | RNVC: 2

2 Jun 1976

5340-14-388-3447
Surface Bolt

143883447
350A25-1169-00: RNCC: 3 | RNVC: 2

3 Nov 1983

5340-14-224-6300
Loop Clamp

142246300
3601-06: RNCC: 3 | RNVC: 2
99001428: RNCC: 3 | RNVC: 2
49030-034: RNCC: 5 | RNVC: 2
99001428: RNCC: 5 | RNVC: 2
3601-06IS0: RNCC: 5 | RNVC: 2
99001428: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-449-1769
Control Rod

144491769
MAT522-0131F3: RNCC: 3 | RNVC: 2

31 Jul 1991

5340-14-444-1024
Rigid Caster

144441024
NO PRIMARY REF14-444-1024: RNCC: 3 | RNVC: 2
179A9031: RNCC: 5 | RNVC: 9

18 Dec 1990

5340-14-300-9520
Loop Clamp

143009520
341A91-0061-11: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-237-0552
Butt Hinge

142370552
NO PRIMARY REF14-237-0552: RNCC: 3 | RNVC: 2
92938: RNCC: 5 | RNVC: 9
062066510: RNCC: 5 | RNVC: 9
66510: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-411-1444
Plug Button

144111444
332A84-1185-21: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-562-0194
Utility Resilient Mount

145620194
35-100-80: RNCC: 3 | RNVC: 2

23 Sep 2009

5340-14-542-6903
Arched Cushion

145426903
160-79531-27: RNCC: 3 | RNVC: 2

28 Jul 2004

5340-14-297-7147
Access Cover

142977147
773-413-049DET1: RNCC: 3 | RNVC: 2
773-413-049DET1: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-412-8943
Retaining Strap

144128943
050A67-617787C: RNCC: 3 | RNVC: 2
0617787C00: RNCC: 3 | RNVC: 2

5 Nov 1986

5340-14-424-6682
Door Holder

144246682
2537853: RNCC: 3 | RNVC: 2
25-37844: RNCC: 5 | RNVC: 2
91605443: RNCC: 5 | RNVC: 2

2 Jun 1988

5340-14-434-7545
Spring Holder

144347545
NO PRIMARY REF14-434-7545: RNCC: 3 | RNVC: 2
400355-02: RNCC: 5 | RNVC: 9

3 Oct 1989

5340-14-237-4806
Loop Clamp

142374806
55212-160-000BGZ: RNCC: 3 | RNVC: 2
55212-160BGZ: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-517-1366
Mounting Bracket

145171366
9040-100-060B: RNCC: 3 | RNVC: 2

10 Nov 1999

5340-14-522-9649
Mounting Bracket

145229649
ST159-2M667P277: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-14-488-4325
Drift Bolt

144884325
1168-02REP81: RNCC: 3 | RNVC: 2
1168-02REP81: RNCC: 5 | RNVC: 9
5340AA2081103: RNCC: 6 | RNVC: 9

7 May 1997

5340-14-369-6324
Key Blank

143696324
B0170-127F7: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-450-4860
Retaining Strap

144504860
058600L2232: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-14-535-2570
Lock-Release Lever

145352570
RA1M701205535: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-467-5734
Loop Clamp

144675734
PE27019RT4A: RNCC: 3 | RNVC: 2

19 Jan 1994

5340-14-539-8141
Angle Bracket

145398141
21244498-1: RNCC: 3 | RNVC: 2

11 Feb 2004

5340-14-439-1936
Plug Button

144391936
16006807: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-421-6269
Access Cover

144216269
225592: RNCC: 3 | RNVC: 2

20 Jan 1988

5340-14-539-2575
Support Hook

145392575
T623G3001803: RNCC: 3 | RNVC: 2

17 Dec 2003

5340-14-515-3315
Mounting Bracket

145153315
3534308205: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-553-0543
Angle Bracket

145530543
RA1N701246017: RNCC: 3 | RNVC: 2

27 Feb 2007

5340-14-402-7360
Loop Clamp

144027360
601595: RNCC: 3 | RNVC: 2

19 Jul 1985

5340-14-478-2841
Loop Clamp

144782841
213102700: RNCC: 3 | RNVC: 2
51313105027: RNCC: 5 | RNVC: 2
Z00.N7141381227: RNCC: 5 | RNVC: 2
21G27: RNCC: 5 | RNVC: 2

18 Oct 1995

5340-14-455-9358
Rod End Clevis

144559358
PM1A727589014: RNCC: 3 | RNVC: 2
PM1A727589014: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-428-6599
Rod End Clevis

144286599
0211470046: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-541-5480
Angle Bracket

145415480
31105234: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-522-2352
Clamp Bolt Assembly

145222352
1MP50045111: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-14-505-2150
Rod End Clevis

145052150
50007779: RNCC: 3 | RNVC: 2

13 Mar 1998

5340-14-552-1930
Bumper

145521930
61152522AA: RNCC: 3 | RNVC: 2

1 Dec 2006

5340-14-416-4338
Mounting Plate

144164338
0795172D01: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-14-500-6455
Section Block Clamp

145006455
E64009998005: RNCC: 3 | RNVC: 2
F300 0T 024 6641: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-417-0701
Retaining Clip

144170701
R1242: RNCC: 3 | RNVC: 2
D1076: RNCC: 5 | RNVC: 2

1 Jul 1987

5340-14-552-4735
Block Clamp

145524735
S881A9101212: RNCC: 3 | RNVC: 2

8 Jan 2007

5340-14-507-0272
Mounting Bracket

145070272
5810: RNCC: 3 | RNVC: 2

3 Jun 1998

5340-14-476-9546
Cover Strip

144769546
RA1M246510205: RNCC: 3 | RNVC: 2

12 Jul 1995

5340-14-539-5744
Mounting Plate

145395744
133241C: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-409-9103
Expansion Shield

144099103
P1520: RNCC: 3 | RNVC: 2
6992-02: RNCC: 3 | RNVC: 2
7903081047: RNCC: 5 | RNVC: 2

4 Jun 1986

5340-14-386-1491
Butt Hinge

143861491
365A25-3073-04: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-347-7512
Runner

143477512
A0141-100: RNCC: 3 | RNVC: 2

1 Mar 1978

5340-14-465-5113
Plug Button

144655113
DHS751-122-08: RNCC: 3 | RNVC: 2
N7640260018: RNCC: 5 | RNVC: 2

30 Sep 1993

5340-14-363-6581
Bumper

143636581
536-410-042BUTEEREP9: RNCC: 3 | RNVC: 2

6 Jul 1980

5340-14-307-7012
Access Cover

143077012
095700387: RNCC: 3 | RNVC: 2
95-700-387: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-338-5616
Access Cover

143385616
15155181: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-361-2732
Access Cover

143612732
Z33301-46: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-475-6753
Utility Access Door

144756753
802290140612: RNCC: 3 | RNVC: 2
802290140612: RNCC: 5 | RNVC: 9
SDM802290140612: RNCC: 5 | RNVC: 9

26 Apr 1995

5340-14-509-8106
Access Cover

145098106
1600-100-216-05: RNCC: 3 | RNVC: 2
1560AA0012156: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-460-3166
Flush Catch Claw

144603166
39449866: RNCC: 3 | RNVC: 2
39449866: RNCC: 5 | RNVC: 9

21 Jan 1993

5340-14-434-2240
Access Cover

144342240
30825500Y: RNCC: 3 | RNVC: 2

13 Sep 1989

5340-14-399-9913
Anchor Strap

143999913
604520: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-427-0250
Access Cover

144270250
16773782: RNCC: 3 | RNVC: 2

5 Oct 1988

5340-14-283-9829
Loop Clamp

142839829
501-800-962-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-398-7239
Access Door Hinge

143987239
280002: RNCC: 3 | RNVC: 2

5 Feb 1985

5340-14-396-5735
Rod End Connector

143965735
600504: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-323-0573
Access Cover

143230573
01AT220: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-383-1950
Quick Release Pin

143831950
9501TMA1072: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-481-9496
Mounting Bracket

144819496
312-17932-501: RNCC: 3 | RNVC: 2

12 Jun 1996

5340-14-374-3141
Tubular Fairlead

143743141
EA1M241-55-09: RNCC: 3 | RNVC: 2
85-691-5948: RNCC: 6 | RNVC: 9

8 Dec 1981

5340-14-309-7832
Webbing Strap

143097832
SMS230-15: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-398-6451
Pipe Hanger

143986451
NO PRIMARY REF14-398-6451: RNCC: 3 | RNVC: 2
UCMC10-1: RNCC: 5 | RNVC: 9

31 Jan 1985

5340-14-234-5968
Loop Clamp

142345968
321A41-0153-00: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-376-6690
Bail Handle

143766690
POF.306-ZB: RNCC: 3 | RNVC: 2
P0F.306-ZB: RNCC: 5 | RNVC: 2
P0F306ZB: RNCC: 5 | RNVC: 2

28 Apr 1982

5340-14-326-2779
Mounting Bracket

143262779
330A98-3434-22: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-469-7218
Loop Clamp

144697218
332A52-1189-2001: RNCC: 3 | RNVC: 2

4 May 1994

5340-14-497-6320
Mounting Plate

144976320
5K4907: RNCC: 3 | RNVC: 2
F300 0T 023 4364: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-521-2854
Mounting Bracket

145212854
96220031: RNCC: 3 | RNVC: 2
198010501339: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-14-349-2016
Retaining Strap

143492016
0813179: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-443-9880
Retaining Strap

144439880
007826010P: RNCC: 3 | RNVC: 2

18 Dec 1990

5340-14-478-4522
Crank Handle

144784522
FTAA28A03: RNCC: 3 | RNVC: 2

6 Nov 1995

5340-14-354-0552
Angle Bracket

143540552
A11A224101034: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-496-8790
Mounting Bracket

144968790
11701101: RNCC: 3 | RNVC: 2
F300 0T 022 2282: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-522-3181
Mounting Bracket

145223181
10459913: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-14-551-1648
Corner Brace

145511648
1823: RNCC: 3 | RNVC: 2

30 Aug 2006

5340-14-439-1980
Mounting Bracket

144391980
16009758: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-482-0936
Angle Bracket

144820936
22397064: RNCC: 3 | RNVC: 2
22397064: RNCC: 5 | RNVC: 9

20 Jun 1996

5340-14-560-7702
Utility Access Door

145607702
10647843: RNCC: 3 | RNVC: 2

25 May 2009

5340-14-420-7118
Loop Clamp

144207118
5005005008: RNCC: 3 | RNVC: 2
89414330: RNCC: 5 | RNVC: 2
89414330: RNCC: 5 | RNVC: 9

16 Dec 1987

5340-14-548-3987
Loop Clamp

145483987
EN4114F11WR1: RNCC: 2 | RNVC: 2

12 Jan 2006

5340-14-522-6958
Pipe Hanger

145226958
01248011: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-14-406-0698
Bumper

144060698
306957: RNCC: 3 | RNVC: 2
FD2479: RNCC: 5 | RNVC: 2

8 Jan 1986

5340-14-500-6235
Mounting Plate

145006235
E64009998131: RNCC: 3 | RNVC: 2
F300 0T 024 6419: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-313-6504
Angle Bracket

143136504
C63083: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-521-7058
Mounting Bracket

145217058
160-888199: RNCC: 3 | RNVC: 2

6 Sep 2000

5340-14-554-9431
Loop Clamp

145549431
78651DH40AG: RNCC: 1 | RNVC: 2
78651DH40AG: RNCC: 3 | RNVC: 2

11 Sep 2007

5340-14-455-7790
Mounting Bracket

144557790
0023158003: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-411-4358
Wiring Harness

144114358
A11A822210250A1: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-372-8493
Angle Bracket

143728493
19416735: RNCC: 3 | RNVC: 2

21 Sep 1981

5340-14-312-3293
Loop Clamp

143123293
18N8: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-521-5505
Angle Bracket

145215505
EQUER00509X00: RNCC: 3 | RNVC: 2

16 Aug 2000

5340-14-379-0189
Bumper

143790189
2206-911A511: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-545-6849
Angle Bracket

145456849
RA1M703750141N1: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-483-2734
Mounting Plate

144832734
4MC801583: RNCC: 3 | RNVC: 2
91497024: RNCC: 5 | RNVC: 2

29 Aug 1996

5340-14-541-5218
Mounting Plate

145415218
1091527: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-356-5025
Angle Bracket

143565025
5171350100: RNCC: 3 | RNVC: 2
713501: RNCC: 5 | RNVC: 2

15 May 1979

5340-14-222-7825
Loop Clamp

142227825
338056: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-520-3772
Angle Bracket

145203772
46511002: RNCC: 3 | RNVC: 9

17 May 2000

5340-14-339-2704
Access Cover

143392704
16138445: RNCC: 3 | RNVC: 2
16138445: RNCC: 3 | RNVC: 9

18 Jan 1977

5340-14-312-1047
Access Cover

143121047
175176: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-478-9937
Access Cover

144789937
45284864: RNCC: 3 | RNVC: 2
45284864: RNCC: 3 | RNVC: 9

6 Dec 1995

5340-14-553-2676
Loop Clamp

145532676
4130446651: RNCC: 3 | RNVC: 2
4130446651: RNCC: 5 | RNVC: 2

20 Mar 2007

5340-14-548-1073
Angle Bracket

145481073
RA1M701215131N1: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-519-8349
Door Handle

145198349
0065600360: RNCC: 3 | RNVC: 2
0065600360: RNCC: 3 | RNVC: 2

12 Apr 2000

5340-14-445-5034
Retaining Strap

144455034
ST406M52P630: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-14-520-0347
Angle Bracket

145200347
341A76-2526-23: RNCC: 3 | RNVC: 2

3 May 2000

5340-14-512-5491
Section Block Clamp

145125491
F706-76-02: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-524-4848
Rod End Clevis

145244848
ST159-2M352P19: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-14-296-5295
Loop Clamp

142965295
707-510-800-1: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-527-8448
Runner

145278448
J06007-01-6000P004: RNCC: 3 | RNVC: 2

27 Nov 2001

5340-14-389-2671
Access Cover

143892671
NO PRIMARY REF14-389-2671: RNCC: 3 | RNVC: 2
718960: RNCC: 5 | RNVC: 9

6 Dec 1995

5340-14-529-9573
Rod End Connector

145299573
1097408G00: RNCC: 3 | RNVC: 2

24 Apr 2002

5340-14-512-8371
Lock Bolt

145128371
214137: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-455-9721
Angle Bracket

144559721
PM1A748124010: RNCC: 3 | RNVC: 2
PM1A748124010: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-514-0464
Section Block Clamp

145140464
RA1M112111143: RNCC: 3 | RNVC: 2

22 Apr 1999

5340-14-549-9490
Angle Bracket

145499490
2092172: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-523-3430
Loop Clamp

145233430
383102002: RNCC: 3 | RNVC: 2
38GM20: RNCC: 5 | RNVC: 2

10 Jan 2001

5340-14-526-3198
Doorstop

145263198
MB4697F00: RNCC: 3 | RNVC: 2

18 Jul 2001

5340-14-518-0195
Angle Bracket

145180195
5010117143: RNCC: 3 | RNVC: 2

21 Jan 2000

5340-14-533-7962
Mounting Bracket

145337962
F1262324: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-330-9551
Retaining Strap

143309551
203279: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-474-4517
Loop Clamp

144744517
51121905029: RNCC: 3 | RNVC: 2
25PE29: RNCC: 5 | RNVC: 2
24PE29: RNCC: 5 | RNVC: 2

15 Feb 1995

5340-14-436-7067
Mounting Bracket

144367067
DA2C203520731A1: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-543-1613
Mounting Bracket

145431613
S242A7020102: RNCC: 3 | RNVC: 2

26 Aug 2004

5340-14-266-6659
Flush Lock

142666659
911B: RNCC: 3 | RNVC: 2
110246-14: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-385-6927
Mounting Plate

143856927
2-34765: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-542-2603
Mounting Bracket

145422603
921727208: RNCC: 3 | RNVC: 2
921727208: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-478-9062
Anchor Strap

144789062
5010146662: RNCC: 3 | RNVC: 2

30 Nov 1995

5340-14-416-6797
Anchor Strap

144166797
412801030002: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-306-4925
Retaining Strap

143064925
494383: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-382-8987
Angle Bracket

143828987
71451: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-521-3551
Mounting Bracket

145213551
27152448-5: RNCC: 3 | RNVC: 2

20 Jul 2000

5340-14-370-8362
Quick Release Pin

143708362
24C1117: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-364-0692
Rod End Connector

143640692
050A57-520698D: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-550-3172
Snap Hook

145503172
18-265-6: RNCC: 3 | RNVC: 2

15 Jun 2006

5340-14-343-9169
Screw Hook

13 Jul 1977

5340-14-552-3110
Bow Handle

145523110
E-05-1: RNCC: 3 | RNVC: 2

12 Dec 2006

5340-14-530-9382
Mounting Bracket

145309382
FERU: RNCC: 3 | RNVC: 2
00070534.0-008: RNCC: 5 | RNVC: 2

17 Jul 2002

5340-14-405-0470
Mortise Lock Set

144050470
64: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-238-3425
Mortise Latch

142383425
179751: RNCC: 3 | RNVC: 9
179751: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-344-6131
Angle Bracket

143446131
11-592-200: RNCC: 3 | RNVC: 2
11-592-200: RNCC: 5 | RNVC: 9

9 Sep 1977

5340-14-503-0164
Cover Strip

145030164
332A58-1690-20: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-521-2753
Mounting Bracket

145212753
9040-200-042A: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-14-521-1528
Access Cover

145211528
F1262616: RNCC: 3 | RNVC: 2
F1262616: RNCC: 5 | RNVC: 2

12 Jul 2000

5340-14-403-5259
Angle Bracket

144035259
5171733700: RNCC: 3 | RNVC: 2
717337: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-418-6732
Angle Bracket

144186732
412902120016: RNCC: 3 | RNVC: 2

9 Sep 1987

5340-14-382-5556
Access Cover

143825556
16960757: RNCC: 3 | RNVC: 2
16960757: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-449-9801
Access Cover

144499801
0786022P01: RNCC: 3 | RNVC: 2

18 Sep 1991

5340-14-266-3137
Retaining Strap

142663137
BFC10225: RNCC: 3 | RNVC: 2
BY148A10225: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-540-0094
Access Cover

145400094
F1399517: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-325-6086
Rod End Clevis

143256086
47573: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-358-3411
Access Cover

143583411
17004: RNCC: 3 | RNVC: 2

13 Aug 1979

5340-14-377-3821
Rod End Clevis

143773821
327766: RNCC: 3 | RNVC: 2
327766: RNCC: 5 | RNVC: 9

17 May 1982

5340-14-402-0836
Access Cover

144020836
400616: RNCC: 3 | RNVC: 2
BGE400616: RNCC: 5 | RNVC: 2

26 Jun 1985

5340-14-382-4951
Access Cover

143824951
16764728: RNCC: 3 | RNVC: 2
16764728: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-483-5488
Mounting Bracket

144835488
46087270: RNCC: 3 | RNVC: 2

19 Sep 1996

5340-14-542-3013
Mounting Bracket

145423013
988910223: RNCC: 3 | RNVC: 2
988910223: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-457-5758
Access Cover

144575758
5000660692: RNCC: 3 | RNVC: 2
89287576: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-396-4106
Access Cover

143964106
P109355D: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-513-8680
Access Cover

145138680
647482: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-384-6560
Access Cover

143846560
16006330: RNCC: 3 | RNVC: 2
16006330: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-536-8567
Mounting Bracket

145368567
29265: RNCC: 3 | RNVC: 2

17 Sep 2003

5340-14-337-6631
Rod End Clevis

143376631
0031184659: RNCC: 3 | RNVC: 2
0031184659: RNCC: 5 | RNVC: 9

6 Nov 1976

5340-14-479-8927
Access Cover

144798927
44036285: RNCC: 3 | RNVC: 2
44036285: RNCC: 5 | RNVC: 9

13 Feb 1996

5340-14-285-9765
Access Cover

142859765
15144772: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-421-3010
Access Cover

144213010
96154152: RNCC: 3 | RNVC: 2

14 Jan 1988

5340-14-417-4054
Access Cover

144174054
253547P03: RNCC: 3 | RNVC: 2
253547P03: RNCC: 5 | RNVC: 9

8 Jul 1987

5340-14-512-1874
Bumper

145121874
1554725: RNCC: 3 | RNVC: 2

8 Feb 1999

5340-14-521-2906
Access Cover

145212906
10488246: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-14-525-8210
Mounting Plate

145258210
N110325B: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-520-3334
Utility Access Door

145203334
MB1964F00: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-523-0579
Elastic Strap

145230579
40446: RNCC: 3 | RNVC: 2

20 Dec 2000

5340-14-372-2067
Mending Plate

143722067
8242093: RNCC: 3 | RNVC: 2
8242093: RNCC: 5 | RNVC: 9

1 Sep 1981

5340-14-532-1631
Bridge Clamp

145321631
5200456635: RNCC: 3 | RNVC: 2

15 Oct 2002

5340-14-553-3378
Mounting Bracket

145533378
T54 834 10: RNCC: 3 | RNVC: 2
T5483410: RNCC: 5 | RNVC: 2

26 Mar 2007

5340-14-448-0706
Butt Hinge

144480706
PM1A711024513: RNCC: 3 | RNVC: 2
PM1A711024513: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-500-5241
Mounting Bracket

145005241
31027: RNCC: 3 | RNVC: 2
F300 0T 024 5414: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-551-2586
Pipe Hanger

145512586
RA1M702316221N1: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-508-1376
Mounting Bracket

145081376
10217706: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-532-4777
Loop Clamp

145324777
MOUS15: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-14-504-6296
Doorstop

145046296
F00156061: RNCC: 3 | RNVC: 2
F00156061: RNCC: 5 | RNVC: 9

25 Feb 1998

5340-14-344-2449
Angle Bracket

143442449
0031144385: RNCC: 3 | RNVC: 2
0031144385: RNCC: 5 | RNVC: 9

10 Aug 1977

5340-14-520-5982
Angle Bracket

145205982
20706611: RNCC: 3 | RNVC: 2

24 May 2000

5340-14-547-5253
Angle Bracket

145475253
RA1M702201241N1: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-433-1465
Permanent Magnet

144331465
122542: RNCC: 3 | RNVC: 2

11 Jul 1989

5340-14-427-6063
Mounting Bracket

144276063
ALZ054055011002: RNCC: 3 | RNVC: 2

26 Oct 1988

5340-14-445-0567
Synchro Clamp

144450567
71442: RNCC: 3 | RNVC: 2

31 Jan 1991

5340-14-341-0251
Mending Plate

143410251
911504: RNCC: 3 | RNVC: 2
911504: RNCC: 5 | RNVC: 9

16 Mar 1977

5340-14-452-1399
Mounting Bracket

144521399
5000728259: RNCC: 3 | RNVC: 2
89471892: RNCC: 5 | RNVC: 2

18 Dec 1991

5340-14-334-6407
Bumper

143346407
T91109010004: RNCC: 3 | RNVC: 2

1 Jun 1976

5340-14-458-4532
Swivel Caster

144584532
179A4477: RNCC: 3 | RNVC: 2

23 Oct 1992

5340-14-335-2855
Bridge Clamp

143352855
70040: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-549-0951
Angle Bracket

145490951
RA1M704755621A1N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-250-3248
Retaining Strap

142503248
ST406M41P51: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-348-3514
Loop Clamp

143483514
123319180: RNCC: 3 | RNVC: 2
PF12A3CN18: RNCC: 5 | RNVC: 2
PF12A3NC18: RNCC: 5 | RNVC: 9
PF12A3CN18: RNCC: 5 | RNVC: 9
PF12A3CN18: RNCC: 5 | RNVC: 9

29 Mar 1978

5340-14-417-3150
Retaining Strap

144173150
20621185: RNCC: 3 | RNVC: 2
20621185: RNCC: 5 | RNVC: 9

1 Jul 1987

5340-14-515-4215
Loop Clamp

145154215
41610041A: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-542-4365
Rim Lock

145424365
NO PRIMARY REF22103 JPM 50: RNCC: 3 | RNVC: 2
22103 JPM 50: RNCC: 5 | RNVC: 2

13 Jul 2004

5340-14-452-6994
Retaining Strap

144526994
62760: RNCC: 3 | RNVC: 2

15 Jan 1992

5340-14-541-3810
Bumper

145413810
31303000401: RNCC: 3 | RNVC: 2

3 Jun 2004

5340-14-401-1318
Retaining Strap

144011318
192953: RNCC: 3 | RNVC: 2

29 May 1985

5340-14-502-5060
Mounting Plate

145025060
5000448845: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-568-9907
Utility Resilient Mount

145689907
606842: RNCC: 3 | RNVC: 2

26 Jul 2011

Load More Results