What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 12 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 12 of 446

5340-14-303-1731
Automotive Axle Assembly Housing

5340-14-602-2480

5340-14-587-9193

5340-14-233-1901
Verbindungsstueck

5340-14-601-6501
Receiver-Transmitter Group

5340-14-451-4939
Ceramic Dielectric Fixed Capacitor

5340-14-206-6118
Shim

5340-14-532-8901
Circuit Card Assembly

5340-14-525-2160
Sleeve Bushing

5340-14-202-5177
Dial Indicating Pressure Gage

5340-14-250-2354
Hose Clamp

5340-14-256-0000
Radio Frequency Amplifier

5340-14-246-1911
Compression Helical Spring

5340-14-239-1129
Access Cover

5340-14-231-2100
Headed Straight Pin

5340-14-523-3554
Fire Extinguishing System Tube Assembly

5340-14-258-0010
C Livella Speciale

5340-14-200-2128
Headless Straight Pin

5340-14-534-4230
Pipe Flange

5340-14-532-9080
Identification Marker

5340-14-314-3459
Electrical Contact

5340-14-541-4304
Communication System

5340-14-589-1460

5340-14-573-9360
Bumper

145739360
M512A1NT29TEREP03: RNCC: 3 | RNVC: 2

21 Nov 2012

5340-14-253-0880
Poignee Speciale

142530880
4078749: RNCC: 3 | RNVC: 2
1216835: RNCC: 5 | RNVC: 2
4078749: RNCC: 5 | RNVC: 9
1216835: RNCC: 5 | RNVC: 9
91758071: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-261-1504
Chape Equipee

142611504
175-27-77: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-508-3550
Fourreau

145083550
184207: RNCC: 3 | RNVC: 2

9 Sep 1998

5340-14-396-2179
Carter De Protectio

143962179
380396: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-272-7727
Arretoirs Jeu

142727727
0000322274: RNCC: 3 | RNVC: 2
0000118610: RNCC: 5 | RNVC: 2
0000118610: RNCC: 5 | RNVC: 9
0000322274: RNCC: 5 | RNVC: 9
322274: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-490-0595
Charniere 30X30

144900595
2603798FF: RNCC: 3 | RNVC: 2

10 Sep 1997

5340-14-574-5553
Retaining Strap

145745553
7421923313: RNCC: 3 | RNVC: 2
21923313: RNCC: 5 | RNVC: 2

30 Jan 2013

5340-14-559-7602
Lock-Release Lever

145597602
P549550: RNCC: 3 | RNVC: 2
4KK978: RNCC: 5 | RNVC: 2

16 Feb 2009

5340-14-257-6096
Doigt Dentrainement

142576096
295P487: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-263-1956
Ressort De Piston

142631956
1414619010: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-229-5244
Bague En Araldite

142295244
6333247: RNCC: 3 | RNVC: 2
6333247: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-326-7662
Raccord Femelle

143267662
466-9M4P76: RNCC: 3 | RNVC: 2
466-9M4P76: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-563-7479
Bumper

145637479
82529800000: RNCC: 3 | RNVC: 2

10 Mar 2010

5340-14-576-6399
Mounting Bracket

145766399
M2512254600100: RNCC: 3 | RNVC: 2

2 Jul 2013

5340-14-314-3275
Loop Clamp

143143275
91307223: RNCC: 3 | RNVC: 2
01200005010: RNCC: 3 | RNVC: 2
120-05: RNCC: 5 | RNVC: 2
120005: RNCC: 5 | RNVC: 2
120005-10: RNCC: 5 | RNVC: 2
3597470003442: RNCC: 5 | RNVC: 2
CN8: RNCC: 5 | RNVC: 2
91307223: RNCC: 5 | RNVC: 2
3108085: RNCC: 5 | RNVC: 2
91307223: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-214-3320
Retaining Strap

142143320
99001408: RNCC: 3 | RNVC: 2
A8010006002: RNCC: 3 | RNVC: 2
E460060P: RNCC: 5 | RNVC: 2
M208-21128: RNCC: 5 | RNVC: 2
33-2222: RNCC: 5 | RNVC: 2
99001408: RNCC: 5 | RNVC: 9
6002: RNCC: 5 | RNVC: 9
6002-13: RNCC: 5 | RNVC: 9
6002NI: RNCC: 5 | RNVC: 9
91406613: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-279-6934
Loop Clamp

142796934
H2P: RNCC: 3 | RNVC: 2
580583-096190.062: RNCC: 5 | RNVC: 2
99061718: RNCC: 5 | RNVC: 2
99061718: RNCC: 5 | RNVC: 2
458435-2: RNCC: 5 | RNVC: 2
458435G0002: RNCC: 5 | RNVC: 2
0146304E00: RNCC: 5 | RNVC: 2
0538027: RNCC: 5 | RNVC: 2
12230810-2: RNCC: 5 | RNVC: 2
13941586-6: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-200-3930
Expansion Plug

142003930
E29584A240AGT: RNCC: 2 | RNVC: 2
E29584-24A: RNCC: 3 | RNVC: 2
AMG31489A: RNCC: 5 | RNVC: 2
8470105270: RNCC: 5 | RNVC: 2
E29584-24A: RNCC: 5 | RNVC: 2
DLT020141: RNCC: 5 | RNVC: 2
R93911-24A: RNCC: 5 | RNVC: 2
R93911A240AGT: RNCC: 5 | RNVC: 2
BEX14-9B2: RNCC: 5 | RNVC: 2
10527-099: RNCC: 5 | RNVC: 2

1 Jan 1962

5340-14-222-6978
Loop Clamp

142226978
L424010: RNCC: 3 | RNVC: 2
2261: RNCC: 5 | RNVC: 2
424010: RNCC: 5 | RNVC: 2
943212031: RNCC: 5 | RNVC: 2
0851808000: RNCC: 5 | RNVC: 2
0943212031: RNCC: 5 | RNVC: 2
TID14217: RNCC: 5 | RNVC: 2
0943212031: RNCC: 5 | RNVC: 9
943212031: RNCC: 5 | RNVC: 9
0851808000: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-259-8394
Buckle

142598394
MB1079: RNCC: 3 | RNVC: 2
1311-1B: RNCC: 5 | RNVC: 2
602M2: RNCC: 5 | RNVC: 2
MB1015: RNCC: 5 | RNVC: 2
1311MB1079: RNCC: 5 | RNVC: 2
212305-0: RNCC: 5 | RNVC: 2
1311MB1015: RNCC: 5 | RNVC: 9
510044: RNCC: 5 | RNVC: 9
602M2: RNCC: 5 | RNVC: 9
85-694-2302: RNCC: 6 | RNVC: 9

1 Jan 1969

5340-14-344-3093
Dust And Moisture Seal Protective Plug

143443093
N400-16: RNCC: 3 | RNVC: 2
ERM022: RNCC: 3 | RNVC: 2
M5410: RNCC: 5 | RNVC: 2
477673A: RNCC: 5 | RNVC: 2
N400TSI16X150: RNCC: 5 | RNVC: 2
TSI16-150: RNCC: 5 | RNVC: 2
TSI16X150: RNCC: 5 | RNVC: 2
N7-640-04-5410: RNCC: 5 | RNVC: 2
91570331: RNCC: 5 | RNVC: 2
36776: RNCC: 5 | RNVC: 9

10 Aug 1977

5340-14-230-1136
Loop Clamp

142301136
EN4114S06NH0: RNCC: 2 | RNVC: 2
51115305006: RNCC: 3 | RNVC: 2
55218-306-001DB: RNCC: 5 | RNVC: 2
55218-306N: RNCC: 5 | RNVC: 2
A0021-25S06: RNCC: 5 | RNVC: 2
25S06: RNCC: 5 | RNVC: 2
A0021-25S06: RNCC: 5 | RNVC: 2
ASNA0021-25S06: RNCC: 5 | RNVC: 2
EN4114S06NH0: RNCC: 5 | RNVC: 2
55218-306D507DB: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-216-6506
Bumper

142166506
517880: RNCC: 3 | RNVC: 2
512251: RNCC: 3 | RNVC: 2
902212250: RNCC: 5 | RNVC: 2
26251831: RNCC: 5 | RNVC: 2
77077456: RNCC: 5 | RNVC: 2
91219577: RNCC: 5 | RNVC: 2
426086: RNCC: 5 | RNVC: 2
5684-00-512251: RNCC: 5 | RNVC: 2
0120131R00: RNCC: 5 | RNVC: 2
8446028: RNCC: 5 | RNVC: 2

1 Jan 1965

5340-14-235-6361
Expansion Plug

142356361
E29584A420AGT: RNCC: 2 | RNVC: 2
E29584-42A: RNCC: 3 | RNVC: 2
224644: RNCC: 5 | RNVC: 2
70224644-8: RNCC: 5 | RNVC: 2
3102859-0: RNCC: 5 | RNVC: 2
R93911-42A: RNCC: 5 | RNVC: 2
R93911A420AGT: RNCC: 5 | RNVC: 2
0702991600: RNCC: 5 | RNVC: 2
202386: RNCC: 5 | RNVC: 2
300424: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-207-9931
Expansion Plug

142079931
E29584A240AGTZ: RNCC: 2 | RNVC: 2
E29584-24AZ: RNCC: 3 | RNVC: 2
202374: RNCC: 5 | RNVC: 2
E29584-24AZ: RNCC: 5 | RNVC: 2
EXPANSIBLE24: RNCC: 5 | RNVC: 2
4802S: RNCC: 5 | RNVC: 2
0000094631: RNCC: 5 | RNVC: 2
0024376013: RNCC: 5 | RNVC: 2
0024481241: RNCC: 5 | RNVC: 2
0000094631: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-279-6935
Loop Clamp

142796935
H4P: RNCC: 3 | RNVC: 2
18526: RNCC: 5 | RNVC: 2
116-51007-004: RNCC: 5 | RNVC: 2
6511-06042: RNCC: 5 | RNVC: 2
4895728: RNCC: 5 | RNVC: 2
2511-660-09154: RNCC: 5 | RNVC: 2
2511 660 09154: RNCC: 5 | RNVC: 2
458435-4: RNCC: 5 | RNVC: 2
573204004: RNCC: 5 | RNVC: 2
99061719: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-327-5542
Clamping Catch

143275542
GP.02-ZB: RNCC: 3 | RNVC: 2
427725: RNCC: 5 | RNVC: 2
20894047: RNCC: 5 | RNVC: 2
26589: RNCC: 5 | RNVC: 2
G02ZB: RNCC: 5 | RNVC: 2
GP-02-ZB: RNCC: 5 | RNVC: 2
GP02ZB: RNCC: 5 | RNVC: 2
BGE00089: RNCC: 5 | RNVC: 2
T20-13B475: RNCC: 5 | RNVC: 2
91409302: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-279-6415
Loop Clamp

142796415
319-10: RNCC: 3 | RNVC: 2
99055585: RNCC: 5 | RNVC: 2
40368771: RNCC: 5 | RNVC: 2
98E14140001: RNCC: 5 | RNVC: 2
3245060319106: RNCC: 5 | RNVC: 2
V03369-23: RNCC: 5 | RNVC: 2
V33692-3: RNCC: 5 | RNVC: 2
V336923: RNCC: 5 | RNVC: 2
99055585: RNCC: 5 | RNVC: 2
0935931013: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-256-2762
Diesel Engine Governor

5340-14-347-0302
Film Fixed Resistor

5340-14-222-6719
Expansion Plug

142226719
E29584A560AGTT: RNCC: 2 | RNVC: 2
R93911-56AT: RNCC: 5 | RNVC: 2
R93911A560AGTT: RNCC: 5 | RNVC: 2
0000130798: RNCC: 5 | RNVC: 2
0024376023: RNCC: 5 | RNVC: 2
5000253645: RNCC: 5 | RNVC: 2
E29584-56AT: RNCC: 5 | RNVC: 2
0000130798: RNCC: 5 | RNVC: 9
0024376023: RNCC: 5 | RNVC: 9
130798: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-279-6933
Loop Clamp

142796933
H1P: RNCC: 3 | RNVC: 2
99061717: RNCC: 5 | RNVC: 2
458435-1: RNCC: 5 | RNVC: 2
0146302C00: RNCC: 5 | RNVC: 2
13941576-2: RNCC: 5 | RNVC: 2
14061122-4: RNCC: 5 | RNVC: 2
4895725: RNCC: 5 | RNVC: 2
116-51007-001: RNCC: 5 | RNVC: 2
2511 660 09151: RNCC: 5 | RNVC: 2
2511-660-09151: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-251-3102

5340-14-202-2283
Expansion Plug

142022283
E29584A300AGTZ: RNCC: 2 | RNVC: 2
E29584-30AZ: RNCC: 3 | RNVC: 2
0706253400: RNCC: 5 | RNVC: 2
R93911-30AZ: RNCC: 5 | RNVC: 2
7062534: RNCC: 5 | RNVC: 2
0000023800: RNCC: 5 | RNVC: 2
0024376016: RNCC: 5 | RNVC: 2
0706253400: RNCC: 5 | RNVC: 2
E29584-30AZ: RNCC: 5 | RNVC: 2
R93911A300AGTZ: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-14-206-9149
Loop Clamp

142069149
ASNA0021-25G08: RNCC: 1 | RNVC: 2
51113105008: RNCC: 3 | RNVC: 2
ASNA0021-25G08: RNCC: 5 | RNVC: 2
A0021-25G08: RNCC: 5 | RNVC: 2
24G8: RNCC: 5 | RNVC: 2
253100800: RNCC: 5 | RNVC: 2
AN742D7C: RNCC: 5 | RNVC: 2
9562810800: RNCC: 5 | RNVC: 2
A0021-25G08: RNCC: 5 | RNVC: 2
25G08: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-264-1711
Loop Clamp

142641711
EN4114S12NH0: RNCC: 2 | RNVC: 2
51115305012: RNCC: 3 | RNVC: 2
Y25S12: RNCC: 3 | RNVC: 2
55218-312N: RNCC: 5 | RNVC: 2
A0021-25S12: RNCC: 5 | RNVC: 2
25S12: RNCC: 5 | RNVC: 2
A0021-25S12: RNCC: 5 | RNVC: 2
55218-312-001DB: RNCC: 5 | RNVC: 2
55218-312D507DB: RNCC: 5 | RNVC: 2
ASNA0021-25S12: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-235-1494
Expansion Plug

142351494
E29584A120AGTT: RNCC: 2 | RNVC: 2
99016101210: RNCC: 3 | RNVC: 2
E29584-12AT: RNCC: 5 | RNVC: 2
R93911-12AT: RNCC: 5 | RNVC: 2
R93911A120AGTT: RNCC: 5 | RNVC: 2
99-016-10-12-10: RNCC: 5 | RNVC: 2
26130079: RNCC: 5 | RNVC: 2
26130079Y: RNCC: 5 | RNVC: 2
14232: RNCC: 5 | RNVC: 9
010158401: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-214-3771
Loop Clamp

142143771
78651RH16CG: RNCC: 5 | RNVC: 2
18547540-7: RNCC: 5 | RNVC: 2
99058673: RNCC: 5 | RNVC: 2
18547540-7: RNCC: 5 | RNVC: 2
99058673: RNCC: 5 | RNVC: 2
243191600: RNCC: 5 | RNVC: 2
78651RH16CG: RNCC: 5 | RNVC: 2
25GE16: RNCC: 5 | RNVC: 9
A0021-25GE16: RNCC: 5 | RNVC: 9
24GE16: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-236-2681
Bumper

142362681
735-21-01: RNCC: 3 | RNVC: 2
91328443: RNCC: 3 | RNVC: 2
735/21/02: RNCC: 3 | RNVC: 2
3680352219: RNCC: 3 | RNVC: 9
479361: RNCC: 5 | RNVC: 2
91356029: RNCC: 5 | RNVC: 2
1934010: RNCC: 5 | RNVC: 9
1934011: RNCC: 5 | RNVC: 9
735-21: RNCC: 5 | RNVC: 9
735-21-01: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-593-1554

5340-14-607-2859

5340-14-274-5878
Loop Clamp

142745878
H5P: RNCC: 3 | RNVC: 2
99061720: RNCC: 5 | RNVC: 2
458435-5: RNCC: 5 | RNVC: 2
116-51007-005: RNCC: 5 | RNVC: 2
564867: RNCC: 5 | RNVC: 2
0146413Y00: RNCC: 5 | RNVC: 2
HP5: RNCC: 5 | RNVC: 2
12230845-9: RNCC: 5 | RNVC: 2
13941579-6: RNCC: 5 | RNVC: 2
573204005: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-583-5164

5340-14-605-3237

5340-14-607-2036

5340-14-446-5040
Dust And Moisture Seal Protective Cap-Plug

144465040
L483044: RNCC: 3 | RNVC: 2
701914: RNCC: 5 | RNVC: 2
7941401043: RNCC: 5 | RNVC: 2
7941401043: RNCC: 5 | RNVC: 2
0204127064: RNCC: 5 | RNVC: 2
204127064: RNCC: 5 | RNVC: 2
483044: RNCC: 5 | RNVC: 2
1210-07: RNCC: 5 | RNVC: 2
4430-05: RNCC: 5 | RNVC: 2
0603936600: RNCC: 5 | RNVC: 2

20 Mar 1991

5340-14-455-3614
Manual Control Handle

144553614
642 720: RNCC: 3 | RNVC: 2
642-720: RNCC: 5 | RNVC: 2
64272: RNCC: 5 | RNVC: 2
642720: RNCC: 5 | RNVC: 2
NLM642 72: RNCC: 5 | RNVC: 2
642 72: RNCC: 5 | RNVC: 2
NLM64272: RNCC: 5 | RNVC: 2
NLM642720: RNCC: 5 | RNVC: 2
642-72: RNCC: 5 | RNVC: 2
NLM642 720: RNCC: 5 | RNVC: 2

21 May 1992

5340-14-323-6853
Spacing Threaded Standoff

143236853
ENINT6-25: RNCC: 3 | RNVC: 2
DEC3-25A5-3: RNCC: 3 | RNVC: 2
2215: RNCC: 3 | RNVC: 2
H12-5030/25: RNCC: 3 | RNVC: 2
ENIT6-25: RNCC: 5 | RNVC: 2
91606056: RNCC: 5 | RNVC: 2
14671: RNCC: 5 | RNVC: 2
E320110Z: RNCC: 5 | RNVC: 2
1509531S00: RNCC: 5 | RNVC: 2
0173655S00: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-264-6277
Line Supporting Strap

142646277
031925: RNCC: 3 | RNVC: 2
31925: RNCC: 5 | RNVC: 2
91762921: RNCC: 5 | RNVC: 2
319-25: RNCC: 5 | RNVC: 2
A4L470598-6: RNCC: 5 | RNVC: 2
3245060319250: RNCC: 5 | RNVC: 2
L470598-6: RNCC: 5 | RNVC: 2
075-25: RNCC: 5 | RNVC: 2
91541632: RNCC: 5 | RNVC: 2
295-1304: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-363-1627
Dust And Moisture Seal Protective Cap

143631627
N300-16X1,5: RNCC: 3 | RNVC: 2
ERM004: RNCC: 3 | RNVC: 2
FT5210: RNCC: 5 | RNVC: 2
8451-161: RNCC: 5 | RNVC: 2
BF16X150: RNCC: 5 | RNVC: 2
N300-16: RNCC: 5 | RNVC: 2
N300-16X150: RNCC: 5 | RNVC: 2
N300BF16X150: RNCC: 5 | RNVC: 2
N7-640-04-5310: RNCC: 5 | RNVC: 2
8451-161: RNCC: 5 | RNVC: 2

3 Apr 1980

5340-14-321-0369
Spacing Threaded Standoff

143210369
H22-5030/15: RNCC: 3 | RNVC: 2
ENMET6-15: RNCC: 3 | RNVC: 2
DEC2-15A5-3: RNCC: 3 | RNVC: 2
2079: RNCC: 3 | RNVC: 2
FF30H3050-15: RNCC: 3 | RNVC: 2
436557: RNCC: 5 | RNVC: 2
0164206L00: RNCC: 5 | RNVC: 2
8-2079CB: RNCC: 5 | RNVC: 2
0578511: RNCC: 5 | RNVC: 2
91455305: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-367-4409
Utility Resilient Mount

143674409
E1E2078S55: RNCC: 3 | RNVC: 2
E1E2078S55: RNCC: 5 | RNVC: 2
15067046: RNCC: 5 | RNVC: 2
E1E2078S55: RNCC: 5 | RNVC: 2
96071316: RNCC: 5 | RNVC: 2
310620781550000: RNCC: 5 | RNVC: 2
E1E 2078 S55: RNCC: 5 | RNVC: 2
15067046: RNCC: 5 | RNVC: 9
96071316: RNCC: 5 | RNVC: 9
96071316: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-216-8544
Utility Resilient Mount

142168544
5212010001: RNCC: 3 | RNVC: 2
0C59770166: RNCC: 3 | RNVC: 2
192742: RNCC: 3 | RNVC: 2
521201: RNCC: 3 | RNVC: 9
389664: RNCC: 5 | RNVC: 2
R00N521201: RNCC: 5 | RNVC: 2
3131675: RNCC: 5 | RNVC: 2
C03414-37: RNCC: 5 | RNVC: 2
7771680OH: RNCC: 5 | RNVC: 2
3131675: RNCC: 5 | RNVC: 2

1 Jan 1965

5340-14-359-7221
Quick Release Plunger

143597221
03000-16: RNCC: 3 | RNVC: 2
533507: RNCC: 5 | RNVC: 2
0238725M00: RNCC: 5 | RNVC: 2
0302 160: RNCC: 5 | RNVC: 2
0302160: RNCC: 5 | RNVC: 2
302 160: RNCC: 5 | RNVC: 2
302-16: RNCC: 5 | RNVC: 2
30216: RNCC: 5 | RNVC: 2
302 16: RNCC: 5 | RNVC: 2
A302-16: RNCC: 5 | RNVC: 2

15 Oct 1979

5340-14-216-8545
Utility Resilient Mount

142168545
521401: RNCC: 3 | RNVC: 2
A0-03T02: RNCC: 5 | RNVC: 2
AD03T02: RNCC: 5 | RNVC: 2
DLT034496: RNCC: 5 | RNVC: 2
R0-521401: RNCC: 5 | RNVC: 2
25460: RNCC: 5 | RNVC: 2
PDP0584: RNCC: 5 | RNVC: 2
0000241268: RNCC: 5 | RNVC: 2
0945330043: RNCC: 5 | RNVC: 2
13012: RNCC: 5 | RNVC: 2

1 Jan 1965

5340-14-256-0707
Dust And Moisture Seal Protective Cap-Plug

142560707
N100-339: RNCC: 3 | RNVC: 2
339: RNCC: 5 | RNVC: 2
C100EM0339RO: RNCC: 5 | RNVC: 2
SYQ1183: RNCC: 5 | RNVC: 2
419928: RNCC: 5 | RNVC: 2
AC13-46: RNCC: 5 | RNVC: 2
419928: RNCC: 5 | RNVC: 2
CAPE100-339: RNCC: 5 | RNVC: 2
M339ROUGE: RNCC: 5 | RNVC: 9
419928: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-271-2818
Spacing Threaded Standoff

142712818
FF10H3050-15: RNCC: 3 | RNVC: 2
H21-5030/15: RNCC: 3 | RNVC: 2
ENMET2-15: RNCC: 3 | RNVC: 2
DEC2-15N5-3: RNCC: 3 | RNVC: 2
2078: RNCC: 3 | RNVC: 2
91276020: RNCC: 5 | RNVC: 2
91474178: RNCC: 5 | RNVC: 2
91606094: RNCC: 5 | RNVC: 2
999/4/32814/025: RNCC: 5 | RNVC: 2
T307-106: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-508-3489
Mechanical Stop

145083489
265172: RNCC: 3 | RNVC: 2
2041-29: RNCC: 3 | RNVC: 2
204129: RNCC: 3 | RNVC: 2
275172: RNCC: 5 | RNVC: 2
97501450: RNCC: 5 | RNVC: 2
2041-29: RNCC: 5 | RNVC: 2
97501451: RNCC: 5 | RNVC: 9
CHN265172: RNCC: 5 | RNVC: 9
9750145380: RNCC: 5 | RNVC: 9
204129: RNCC: 6 | RNVC: 9

8 Sep 1998

5340-14-216-1029
Dust And Moisture Seal Protective Cap-Plug

142161029
N100-205: RNCC: 3 | RNVC: 2
620-990-049-0: RNCC: 5 | RNVC: 2
RU41279: RNCC: 5 | RNVC: 2
7100336: RNCC: 5 | RNVC: 2
81179: RNCC: 5 | RNVC: 2
RU41279: RNCC: 5 | RNVC: 2
CAPE100-205: RNCC: 5 | RNVC: 2
SYQ1128: RNCC: 5 | RNVC: 2
620-990-049-0: RNCC: 5 | RNVC: 2
AC13-30: RNCC: 5 | RNVC: 2

1 Jan 1965

5340-14-233-8720
Line Supporting Strap

142338720
031916: RNCC: 3 | RNVC: 2
319-16: RNCC: 3 | RNVC: 2
540-62: RNCC: 3 | RNVC: 2
0935931015: RNCC: 3 | RNVC: 2
Z73029: RNCC: 5 | RNVC: 2
319-16: RNCC: 5 | RNVC: 2
N51946: RNCC: 5 | RNVC: 2
M4ZS460D8452: RNCC: 5 | RNVC: 2
91346644: RNCC: 5 | RNVC: 2
9539071070: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-279-6418
Line Supporting Strap

142796418
031919: RNCC: 3 | RNVC: 2
0935931016: RNCC: 3 | RNVC: 2
13947004-9: RNCC: 5 | RNVC: 2
M4ZS460D2511: RNCC: 5 | RNVC: 2
A04080204: RNCC: 5 | RNVC: 2
V950100: RNCC: 5 | RNVC: 2
9539071060: RNCC: 5 | RNVC: 2
540-92: RNCC: 5 | RNVC: 2
6980-22: RNCC: 5 | RNVC: 2
319-19: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-590-6522

5340-14-233-8722
Line Supporting Strap

142338722
Z42509: RNCC: 3 | RNVC: 2
540-42: RNCC: 3 | RNVC: 2
98E14140002: RNCC: 3 | RNVC: 2
031913: RNCC: 3 | RNVC: 2
A04080201: RNCC: 3 | RNVC: 2
91481535: RNCC: 5 | RNVC: 2
0935931014: RNCC: 5 | RNVC: 2
M2005231: RNCC: 5 | RNVC: 2
31913: RNCC: 5 | RNVC: 2
12230836-3: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-267-2426
Assembled Nut Retainer

142672426
52409-64L: RNCC: 1 | RNVC: 2
LC6-470L: RNCC: 3 | RNVC: 2
NSA52409-64L: RNCC: 5 | RNVC: 2
LC6-470L: RNCC: 5 | RNVC: 2
90423: RNCC: 5 | RNVC: 2
LC6-470L: RNCC: 5 | RNVC: 2
N5497295159: RNCC: 5 | RNVC: 2
LC6-470L: RNCC: 5 | RNVC: 9
E1614701: RNCC: 5 | RNVC: 9
LC6 470 CLIPS L: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-344-3099
Dust And Moisture Seal Protective Plug

143443099
N400-27: RNCC: 3 | RNVC: 2
ERM027: RNCC: 3 | RNVC: 2
N7-640-04-5420: RNCC: 5 | RNVC: 2
91601265: RNCC: 5 | RNVC: 2
M5420: RNCC: 5 | RNVC: 2
57990-181-1: RNCC: 5 | RNVC: 2
N400TSI27X150: RNCC: 5 | RNVC: 2
TSI27-150: RNCC: 5 | RNVC: 2
TSI27X150: RNCC: 5 | RNVC: 2
M5420: RNCC: 5 | RNVC: 2

10 Aug 1977

5340-14-206-4015
Dust And Moisture Seal Protective Plug

142064015
4344: RNCC: 3 | RNVC: 2
1090119: RNCC: 3 | RNVC: 2
0683-02-40X45: RNCC: 3 | RNVC: 2
9683-02-444: RNCC: 3 | RNVC: 2
10-901-19: RNCC: 3 | RNVC: 2
368584: RNCC: 5 | RNVC: 2
700-40: RNCC: 5 | RNVC: 2
07987: RNCC: 5 | RNVC: 2
9683-02-40X45: RNCC: 5 | RNVC: 9
9683-02-444: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-306-2429
Quick Release Plunger

143062429
03000-06: RNCC: 3 | RNVC: 2
0119015Y00: RNCC: 5 | RNVC: 2
0302060: RNCC: 5 | RNVC: 2
5010631978: RNCC: 5 | RNVC: 2
302-060: RNCC: 5 | RNVC: 9
302060: RNCC: 5 | RNVC: 9
6310-0: RNCC: 5 | RNVC: 9
0302 060: RNCC: 5 | RNVC: 9
302 06: RNCC: 5 | RNVC: 9
302 060: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-327-0218
Dust And Moisture Seal Protective Cap

143270218
N300-12X1: RNCC: 3 | RNVC: 2
ERM003: RNCC: 3 | RNVC: 2
FT5208: RNCC: 5 | RNVC: 2
8451-121: RNCC: 5 | RNVC: 2
BF12X100: RNCC: 5 | RNVC: 2
N300-12X100: RNCC: 5 | RNVC: 2
N300BF12X100: RNCC: 5 | RNVC: 2
NCH9003001: RNCC: 5 | RNVC: 2
N7-640-04-5308: RNCC: 5 | RNVC: 2
8451-121: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-296-9326
Dust And Moisture Seal Protective Plug

142969326
C1009 06: RNCC: 3 | RNVC: 2
5659-6: RNCC: 5 | RNVC: 2
C 1009 06: RNCC: 5 | RNVC: 2
VDPM02952: RNCC: 5 | RNVC: 2
5659-6: RNCC: 5 | RNVC: 2
1950140: RNCC: 5 | RNVC: 2
1-95-01-40: RNCC: 5 | RNVC: 9
1950140: RNCC: 5 | RNVC: 9
5659-6: RNCC: 5 | RNVC: 9
91597464: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-266-0474
Dust And Moisture Seal Protective Cap

142660474
15613-3: RNCC: 3 | RNVC: 2
1950146: RNCC: 3 | RNVC: 2
C 1007 10: RNCC: 3 | RNVC: 2
VDPM02947: RNCC: 5 | RNVC: 2
5657-10: RNCC: 5 | RNVC: 2
91502651: RNCC: 5 | RNVC: 2
1-95-01-46: RNCC: 5 | RNVC: 9
1950146: RNCC: 5 | RNVC: 9
5657-10: RNCC: 5 | RNVC: 9
156133: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-216-7610
Plain Solid Disk

142167610
005091J: RNCC: 3 | RNVC: 2
FJPN4-8X2-4: RNCC: 3 | RNVC: 2
19358: RNCC: 3 | RNVC: 9
38554: RNCC: 5 | RNVC: 2
N00450-23: RNCC: 5 | RNVC: 2
0948809236: RNCC: 5 | RNVC: 2
0948809605: RNCC: 5 | RNVC: 2
5010054300: RNCC: 5 | RNVC: 2
0948809236: RNCC: 5 | RNVC: 9
0948809605: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-256-0702
Dust And Moisture Seal Protective Cap-Plug

142560702
N100-113: RNCC: 3 | RNVC: 2
107 040 010: RNCC: 3 | RNVC: 2
BP12: RNCC: 3 | RNVC: 2
7100315: RNCC: 5 | RNVC: 2
5000988296: RNCC: 5 | RNVC: 2
113: RNCC: 5 | RNVC: 2
C100EM0113RO: RNCC: 5 | RNVC: 2
7100315: RNCC: 5 | RNVC: 2
CAPE100-113: RNCC: 5 | RNVC: 2
7-10-03-15: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-337-0359
Spacing Threaded Standoff

143370359
ENMET12-15: RNCC: 3 | RNVC: 2
X079: RNCC: 3 | RNVC: 2
FF40H3055-15: RNCC: 3 | RNVC: 2
H24-5530/15: RNCC: 3 | RNVC: 2
DEC2-15I5,5-3: RNCC: 3 | RNVC: 2
613839: RNCC: 5 | RNVC: 2
99069701: RNCC: 5 | RNVC: 2
77093911: RNCC: 5 | RNVC: 2
ENMET-12X15: RNCC: 5 | RNVC: 2
99069701: RNCC: 5 | RNVC: 9

7 Oct 1976

5340-14-326-6620
Dust And Moisture Seal Protective Cap

143266620
N300-18X1,5: RNCC: 3 | RNVC: 2
ERM005: RNCC: 3 | RNVC: 2
N300-18: RNCC: 5 | RNVC: 2
N300-18X150: RNCC: 5 | RNVC: 2
N300BF18X150: RNCC: 5 | RNVC: 2
N7-640-04-5312: RNCC: 5 | RNVC: 2
EMDAS05638: RNCC: 5 | RNVC: 2
91570325: RNCC: 5 | RNVC: 2
102605: RNCC: 5 | RNVC: 2
FT5212: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-200-3135
Dust And Moisture Seal Boot

142003135
376003: RNCC: 3 | RNVC: 2
387642: RNCC: 5 | RNVC: 2
1426: RNCC: 5 | RNVC: 2
376003-80: RNCC: 5 | RNVC: 2
4629-03: RNCC: 5 | RNVC: 2
8092010: RNCC: 5 | RNVC: 2
919152090: RNCC: 5 | RNVC: 2
E68376003: RNCC: 5 | RNVC: 2
51299: RNCC: 5 | RNVC: 2
396581003: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-14-418-4132
Mechanical Stop

144184132
0103 002.26: RNCC: 3 | RNVC: 2
010300226: RNCC: 3 | RNVC: 9
0215768E00: RNCC: 5 | RNVC: 2
010300226: RNCC: 5 | RNVC: 2
K02300086: RNCC: 5 | RNVC: 2
103002-26: RNCC: 5 | RNVC: 2
103002.26: RNCC: 5 | RNVC: 2
10300226: RNCC: 5 | RNVC: 2
0523006: RNCC: 5 | RNVC: 2
CAE01148: RNCC: 5 | RNVC: 2

21 Aug 1987

5340-14-340-2823
Line Supporting Strap

143402823
01210001010: RNCC: 3 | RNVC: 2
121-001: RNCC: 5 | RNVC: 2
121001: RNCC: 5 | RNVC: 2
121001-10: RNCC: 5 | RNVC: 2
3597470003626: RNCC: 5 | RNVC: 2
CR50: RNCC: 5 | RNVC: 2
21143-05-01-71: RNCC: 5 | RNVC: 2
21816-20-00-57: RNCC: 5 | RNVC: 2
5156158000: RNCC: 5 | RNVC: 2
0502 141: RNCC: 5 | RNVC: 2

14 Feb 1977

5340-14-206-4019
Dust And Moisture Seal Protective Plug

142064019
4345: RNCC: 3 | RNVC: 2
10-901-22: RNCC: 3 | RNVC: 2
9683-02: RNCC: 5 | RNVC: 2
9683-02-50: RNCC: 5 | RNVC: 2
3007-50X60: RNCC: 5 | RNVC: 2
9683-02-555: RNCC: 5 | RNVC: 2
1090122: RNCC: 5 | RNVC: 2
700-50: RNCC: 5 | RNVC: 2
700N0RMAL50BR0NZE: RNCC: 5 | RNVC: 2
9560136290: RNCC: 5 | RNVC: 2

22 Apr 1998

5340-14-279-4821
Dust And Moisture Seal Protective Cap-Plug

142794821
N100-184: RNCC: 3 | RNVC: 2
AC13-27: RNCC: 5 | RNVC: 2
184: RNCC: 5 | RNVC: 2
620-990-100-0: RNCC: 5 | RNVC: 2
7100333: RNCC: 5 | RNVC: 2
BP19: RNCC: 5 | RNVC: 2
7100333: RNCC: 5 | RNVC: 2
7-10-03-33: RNCC: 5 | RNVC: 9
21353: RNCC: 5 | RNVC: 9
821353: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-224-9328
Utility Resilient Mount

142249328
531702C75: RNCC: 3 | RNVC: 2
531702-19191-75: RNCC: 5 | RNVC: 2
SC21-531702C75: RNCC: 5 | RNVC: 2
8446117: RNCC: 5 | RNVC: 2
A105089B: RNCC: 5 | RNVC: 2
0945320043: RNCC: 5 | RNVC: 2
SC21C75: RNCC: 5 | RNVC: 9
0945320043: RNCC: 5 | RNVC: 9
945320043: RNCC: 5 | RNVC: 9
061269247: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-326-6619
Dust And Moisture Seal Protective Cap

143266619
N300-10X1: RNCC: 3 | RNVC: 2
ERM002: RNCC: 3 | RNVC: 2
3160S92-43-000: RNCC: 5 | RNVC: 2
FT5206: RNCC: 5 | RNVC: 2
106570: RNCC: 5 | RNVC: 2
165001: RNCC: 5 | RNVC: 2
233251-BZ: RNCC: 5 | RNVC: 2
8451-101: RNCC: 5 | RNVC: 2
BF10X100: RNCC: 5 | RNVC: 2
N300-10: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-230-3227
Utility Resilient Mount

142303227
521602: RNCC: 3 | RNVC: 2
R4-1769-00: RNCC: 5 | RNVC: 2
3020-3-70: RNCC: 5 | RNVC: 2
11238: RNCC: 5 | RNVC: 2
BFP00316: RNCC: 5 | RNVC: 2
0023535341: RNCC: 5 | RNVC: 2
R4-521602: RNCC: 5 | RNVC: 2
132: RNCC: 5 | RNVC: 9
132S: RNCC: 5 | RNVC: 9
50315: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-344-3094
Dust And Moisture Seal Protective Plug

143443094
ERM023: RNCC: 3 | RNVC: 2
N400-18: RNCC: 3 | RNVC: 2
N400TSI18X150: RNCC: 5 | RNVC: 2
TSI18-150: RNCC: 5 | RNVC: 2
TSI18X150: RNCC: 5 | RNVC: 2
N7-640-04-5412: RNCC: 5 | RNVC: 2
91570332: RNCC: 5 | RNVC: 2
M5412: RNCC: 5 | RNVC: 2
477672H: RNCC: 5 | RNVC: 2
M5412: RNCC: 5 | RNVC: 9

10 Aug 1977

5340-14-336-4977
Dust And Moisture Seal Protective Cap

143364977
N300-27X1,5: RNCC: 3 | RNVC: 2
ERM007: RNCC: 3 | RNVC: 2
N300-27X150: RNCC: 5 | RNVC: 2
N300-BF27X150: RNCC: 5 | RNVC: 2
FT5220: RNCC: 5 | RNVC: 2
N300-27: RNCC: 5 | RNVC: 2
N7640045320: RNCC: 5 | RNVC: 2
SYQ-1023: RNCC: 5 | RNVC: 2
BF27X150: RNCC: 5 | RNVC: 2
BF27X150N300: RNCC: 5 | RNVC: 9

14 Aug 1976

5340-14-391-2924
Quick Release Plunger

143912924
03010-08: RNCC: 3 | RNVC: 2
0229695E00: RNCC: 5 | RNVC: 2
0303 080: RNCC: 5 | RNVC: 2
303 08: RNCC: 5 | RNVC: 2
303 080: RNCC: 5 | RNVC: 2
303-08: RNCC: 5 | RNVC: 2
303-080: RNCC: 5 | RNVC: 2
30308: RNCC: 5 | RNVC: 2
A03230325: RNCC: 5 | RNVC: 2
0303-080: RNCC: 5 | RNVC: 2

1 Mar 1984

5340-14-212-7991
Utility Resilient Mount

142127991
531301C75: RNCC: 3 | RNVC: 2
4-584587-4: RNCC: 3 | RNVC: 2
SC00-531301C75: RNCC: 5 | RNVC: 2
SC00C75: RNCC: 5 | RNVC: 2
681: RNCC: 5 | RNVC: 2
91628075: RNCC: 5 | RNVC: 2
102059: RNCC: 5 | RNVC: 2
16180858: RNCC: 5 | RNVC: 2
430672: RNCC: 5 | RNVC: 2
531301: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-235-8669
Utility Resilient Mount

142358669
521251: RNCC: 3 | RNVC: 2
574954-0-00: RNCC: 5 | RNVC: 2
04085877: RNCC: 5 | RNVC: 2
40858: RNCC: 5 | RNVC: 2
164425: RNCC: 5 | RNVC: 2
532688: RNCC: 5 | RNVC: 2
14-272: RNCC: 5 | RNVC: 2
0945391012: RNCC: 5 | RNVC: 2
5000/750/519: RNCC: 5 | RNVC: 2
5000750492: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-256-0701
Dust And Moisture Seal Protective Cap-Plug

142560701
N100-105: RNCC: 3 | RNVC: 2
105: RNCC: 5 | RNVC: 2
7100313: RNCC: 5 | RNVC: 2
AC13-08: RNCC: 5 | RNVC: 2
105: RNCC: 5 | RNVC: 2
CAPE100-105: RNCC: 5 | RNVC: 2
SYQ1122: RNCC: 5 | RNVC: 2
7100313: RNCC: 5 | RNVC: 9
BP11: RNCC: 5 | RNVC: 9
7-10-03-13: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-337-0355
Spacing Threaded Standoff

143370355
609048: RNCC: 3 | RNVC: 2
H14-5530/10: RNCC: 3 | RNVC: 2
ENINT12-10: RNCC: 3 | RNVC: 2
X205: RNCC: 3 | RNVC: 2
MF40H3055-10: RNCC: 3 | RNVC: 2
403472: RNCC: 5 | RNVC: 2
91316571: RNCC: 5 | RNVC: 2
91606047: RNCC: 5 | RNVC: 2
99069708: RNCC: 5 | RNVC: 2
A1230542: RNCC: 5 | RNVC: 2

7 Oct 1976

5340-14-305-4762
Dust And Moisture Seal Protective Plug

143054762
601-081: RNCC: 3 | RNVC: 2
040-4020: RNCC: 3 | RNVC: 2
040-4020: RNCC: 5 | RNVC: 2
0616130226: RNCC: 5 | RNVC: 2
NB08-001.00-020: RNCC: 5 | RNVC: 2
91224771: RNCC: 5 | RNVC: 2
2263652740: RNCC: 5 | RNVC: 2
SK00070: RNCC: 5 | RNVC: 2
040-4020: RNCC: 5 | RNVC: 2
C106-Z2-C57: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-222-6747
Utility Resilient Mount

142226747
531301A45: RNCC: 3 | RNVC: 2
531301-19187-45: RNCC: 5 | RNVC: 2
531301-45: RNCC: 5 | RNVC: 2
SC00A45: RNCC: 5 | RNVC: 2
SC00A45-531301: RNCC: 5 | RNVC: 2
680: RNCC: 5 | RNVC: 2
433756: RNCC: 5 | RNVC: 9
502304: RNCC: 5 | RNVC: 9
12000002: RNCC: 5 | RNVC: 9
12000002P: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-353-0172
Dust And Moisture Seal Protective Plug

143530172
C400TM10R0: RNCC: 3 | RNVC: 2
ERM015: RNCC: 3 | RNVC: 2
M5406: RNCC: 5 | RNVC: 2
8450-101: RNCC: 5 | RNVC: 2
N400-10: RNCC: 5 | RNVC: 2
N400TSI10X100: RNCC: 5 | RNVC: 2
TSI10X100: RNCC: 5 | RNVC: 2
N7-640-04-5406: RNCC: 5 | RNVC: 2
AACBE486-6M: RNCC: 5 | RNVC: 2
91600651: RNCC: 5 | RNVC: 2

14 Nov 1978

5340-14-300-2739
Dust And Moisture Seal Protective Plug

143002739
FG797-05-0800: RNCC: 3 | RNVC: 2
104-0001-05: RNCC: 3 | RNVC: 2
104-0001-05: RNCC: 3 | RNVC: 2
35760: RNCC: 5 | RNVC: 2
48205: RNCC: 5 | RNVC: 2
BP05: RNCC: 5 | RNVC: 2
DF01-797-05-0800: RNCC: 5 | RNVC: 2
FG797-05-0800: RNCC: 5 | RNVC: 2
FG797-05-0800: RNCC: 5 | RNVC: 2
620-990-077-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-571-5635
Loop Clamp

145715635
NSA8603-887: RNCC: 1 | RNVC: 2
4369A887M: RNCC: 3 | RNVC: 2
NSA8603-887: RNCC: 3 | RNVC: 2
NSA8603-887: RNCC: 3 | RNVC: 2
86030887: RNCC: 3 | RNVC: 2
1501887: RNCC: 3 | RNVC: 2
BA25032-1: RNCC: 3 | RNVC: 2
NSA8603-887: RNCC: 3 | RNVC: 2
6299366-0887: RNCC: 3 | RNVC: 2
6299366-887: RNCC: 3 | RNVC: 2

6 Apr 2012

5340-14-385-5851
Quick Release Plunger

143855851
03010-06: RNCC: 3 | RNVC: 2
0208615S00: RNCC: 5 | RNVC: 2
303 06: RNCC: 5 | RNVC: 2
303-060: RNCC: 5 | RNVC: 2
5340001663: RNCC: 5 | RNVC: 2
0303 060: RNCC: 5 | RNVC: 2
0303060: RNCC: 5 | RNVC: 2
303 060: RNCC: 5 | RNVC: 2
303-06: RNCC: 5 | RNVC: 2
NLM30306: RNCC: 5 | RNVC: 2

26 Jul 1983

5340-14-230-0576
Assembled Nut Retainer

142300576
LC6-580C: RNCC: 3 | RNVC: 2
52409-65C: RNCC: 5 | RNVC: 2
N5497294239: RNCC: 5 | RNVC: 2
52409-65C: RNCC: 5 | RNVC: 2
NSA52409-65C: RNCC: 5 | RNVC: 2
LC6-580C: RNCC: 5 | RNVC: 2
20-03-04-401: RNCC: 5 | RNVC: 9
LC6-580C: RNCC: 5 | RNVC: 9
E1615800: RNCC: 5 | RNVC: 9
LC6 580 CLIPS C: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-307-9111
Line Supporting Strap

143079111
031922: RNCC: 3 | RNVC: 2
3245060319229: RNCC: 5 | RNVC: 2
COLSON31922: RNCC: 5 | RNVC: 2
295-1281: RNCC: 5 | RNVC: 2
31922: RNCC: 5 | RNVC: 2
91306838: RNCC: 5 | RNVC: 2
0935931011: RNCC: 5 | RNVC: 2
319-22: RNCC: 5 | RNVC: 2
0935931011: RNCC: 5 | RNVC: 9
935931011: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-216-1033
Dust And Moisture Seal Protective Cap-Plug

142161033
N100-311: RNCC: 3 | RNVC: 2
7100348: RNCC: 5 | RNVC: 2
91473661: RNCC: 5 | RNVC: 2
501-993-051-0: RNCC: 5 | RNVC: 2
AC13-44: RNCC: 5 | RNVC: 2
311: RNCC: 5 | RNVC: 2
CAPE100-311: RNCC: 5 | RNVC: 2
SOM3-311: RNCC: 5 | RNVC: 9
7-10-03-48: RNCC: 5 | RNVC: 9
7100348: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-349-6210
Spacing Threaded Standoff

143496210
2204: RNCC: 3 | RNVC: 2
E181U: RNCC: 3 | RNVC: 2
H11-5030/10: RNCC: 3 | RNVC: 2
ENINT1-10: RNCC: 3 | RNVC: 2
DEC3-10N5-3: RNCC: 3 | RNVC: 2
91318434: RNCC: 5 | RNVC: 2
91606046: RNCC: 5 | RNVC: 2
31420304011: RNCC: 5 | RNVC: 2
E320020Z: RNCC: 5 | RNVC: 2
0119183T00: RNCC: 5 | RNVC: 2

22 May 1978

5340-14-296-9327
Dust And Moisture Seal Protective Plug

142969327
C1009 10: RNCC: 3 | RNVC: 2
C 1009 10: RNCC: 5 | RNVC: 2
5659-10: RNCC: 5 | RNVC: 2
1950141: RNCC: 5 | RNVC: 2
91502652: RNCC: 5 | RNVC: 2
VDP5079: RNCC: 5 | RNVC: 2
15612-5: RNCC: 5 | RNVC: 2
VDPM02950: RNCC: 5 | RNVC: 2
1950141: RNCC: 5 | RNVC: 9
1-95-01-41: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-347-7919
Spacing Threaded Standoff

143477919
H12-5030/10: RNCC: 3 | RNVC: 2
ENINT6-10: RNCC: 3 | RNVC: 2
DEC3-10A5-3: RNCC: 3 | RNVC: 2
2205: RNCC: 3 | RNVC: 2
12441006-2: RNCC: 3 | RNVC: 2
436558: RNCC: 5 | RNVC: 2
1510257Z00: RNCC: 5 | RNVC: 2
ENINT6H10M3: RNCC: 5 | RNVC: 2
574041205: RNCC: 5 | RNVC: 2
91376567: RNCC: 5 | RNVC: 2

1 Mar 1978

5340-14-604-6043

5340-14-289-8058
Spring Tension Clip

142898058
052244050162: RNCC: 3 | RNVC: 9
427903: RNCC: 5 | RNVC: 2
K7000995: RNCC: 5 | RNVC: 2
113500: RNCC: 5 | RNVC: 2
BAZ4043: RNCC: 5 | RNVC: 2
91562042: RNCC: 5 | RNVC: 2
0022126064: RNCC: 5 | RNVC: 2
7703078026: RNCC: 5 | RNVC: 2
A09050705: RNCC: 5 | RNVC: 2
052244: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-203-3488
Dust And Moisture Seal Protective Cap

142033488
3015001: RNCC: 3 | RNVC: 2
9561420030: RNCC: 5 | RNVC: 2
613-990-012-0: RNCC: 5 | RNVC: 2
620-990-001-0: RNCC: 5 | RNVC: 2
301500: RNCC: 5 | RNVC: 2
181: RNCC: 5 | RNVC: 2
04AT0124: RNCC: 5 | RNVC: 2
264549: RNCC: 5 | RNVC: 2
301500: RNCC: 5 | RNVC: 2
021411: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-14-590-6523

5340-14-386-8644
Dust And Moisture Seal Protective Plug

143868644
1323002: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-452-0378
Bumper

144520378
12410693-1: RNCC: 3 | RNVC: 2
SJ5303: RNCC: 3 | RNVC: 2
AA020377: RNCC: 6 | RNVC: 9

18 Dec 1991

5340-14-552-2498
Mounting Bracket

145522498
1216-261-000J: RNCC: 3 | RNVC: 2

6 Dec 2006

5340-14-585-8568
Access Cover

5340-14-323-5632
Nut And Bolt Retainer

143235632
83512: RNCC: 3 | RNVC: 2
0383 8: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-350-8685
Utility Resilient Mount

143508685
521297: RNCC: 3 | RNVC: 2
254-7494: RNCC: 5 | RNVC: 2

12 Jul 1978

5340-14-479-8914
Rod Retainer Clip

144798914
44035934: RNCC: 3 | RNVC: 2
44035934: RNCC: 5 | RNVC: 9

13 Feb 1996

5340-14-529-4056
Shelf Bracket

145294056
44040491: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-529-8650
Bumper

145298650
A35808: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-529-4094
Angle Bracket

145294094
44040445: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-529-8663
Retaining Clip

145298663
A35794: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-552-9471
Catch Strike

145529471
47044803: RNCC: 3 | RNVC: 2

15 Feb 2007

5340-14-550-7538
Spring Holder

145507538
1216-005U003A: RNCC: 3 | RNVC: 2

12 Jul 2006

5340-14-273-0888
Loop Clamp

142730888
H3V: RNCC: 3 | RNVC: 2
99008506: RNCC: 5 | RNVC: 2
000836020N: RNCC: 5 | RNVC: 2
91236502: RNCC: 5 | RNVC: 2
99008506: RNCC: 5 | RNVC: 2
91320080: RNCC: 5 | RNVC: 2
91236502: RNCC: 5 | RNVC: 2
44002869-04: RNCC: 5 | RNVC: 2
44002869-04: RNCC: 5 | RNVC: 9
100SP27-0019: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-225-2820
Dust And Moisture Seal Protective Plug

142252820
69711: RNCC: 3 | RNVC: 2
ITC69711: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-525-8889
Retaining Band

145258889
01080571: RNCC: 3 | RNVC: 2

18 Jun 2001

5340-14-529-4055
Plug Button

145294055
44040474: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-548-4425
Access Cover

145484425
217138-0: RNCC: 3 | RNVC: 2

17 Jan 2006

5340-14-552-2447
Mounting Bracket

145522447
1216-002U100D: RNCC: 3 | RNVC: 2

6 Dec 2006

5340-14-553-5890
Webbing Strap

145535890
47044801: RNCC: 3 | RNVC: 2

19 Apr 2007

5340-14-555-1375
Corrosion Preventive Anode

145551375
7E-5076: RNCC: 3 | RNVC: 2

4 Oct 2007

5340-14-559-0138
Mounting Plate

145590138
F1464550: RNCC: 3 | RNVC: 2

27 Nov 2008

5340-14-566-1627
Mounting Bracket

145661627
44036781AA: RNCC: 3 | RNVC: 2
44036781AA: RNCC: 5 | RNVC: 2

25 Oct 2010

5340-14-557-5087
Bumper

145575087
030303400: RNCC: 3 | RNVC: 2
030303400: RNCC: 5 | RNVC: 2

16 Jun 2008

5340-14-571-7861
Flange Attachement

145717861
F1517188: RNCC: 3 | RNVC: 2

9 May 2012

5340-14-585-8535
Mounting Bracket

5340-14-294-6353
Dust And Moisture Seal Protective Cap-Plug

142946353
N100CL-162: RNCC: 3 | RNVC: 2
162: RNCC: 5 | RNVC: 2
N100-162CL: RNCC: 5 | RNVC: 2
N100-162: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-551-8184
Clevis And U-Bolt

145518184
216816-0: RNCC: 3 | RNVC: 2

26 Oct 2006

5340-14-559-0134
Mounting Plate

145590134
F1510254: RNCC: 3 | RNVC: 2
F1464548: RNCC: 3 | RNVC: 9

27 Nov 2008

5340-14-569-2603
Loop Clamp

145692603
649-412-307-0: RNCC: 3 | RNVC: 2

30 Aug 2011

5340-14-480-9749
Mounting Plate

144809749
19851101: RNCC: 3 | RNVC: 2
F8294-19851101: RNCC: 5 | RNVC: 2

11 Apr 1996

5340-14-540-0731
Mounting Plate

145400731
MOA36029: RNCC: 3 | RNVC: 2

4 Mar 2004

5340-14-553-5184
Access Cover

145535184
4310876: RNCC: 3 | RNVC: 2

11 Apr 2007

5340-14-567-7433
Mounting Plate

145677433
340-067-405-0: RNCC: 3 | RNVC: 2

8 Apr 2011

5340-14-567-7429
Mounting Plate

145677429
340-065-605-0: RNCC: 3 | RNVC: 2

8 Apr 2011

5340-14-570-2836
Snap Hook

145702836
2478: RNCC: 3 | RNVC: 2
W2478: RNCC: 5 | RNVC: 2

6 Dec 2011

5340-14-571-9638
Bumper

145719638
44037198: RNCC: 3 | RNVC: 2

29 May 2012

5340-14-585-5547
Mounting Bracket

5340-14-322-9435
Plain Solid Disk

143229435
75412: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-478-8393
Retaining Clip

144788393
44036636: RNCC: 3 | RNVC: 2
44036636: RNCC: 5 | RNVC: 2
44036636: RNCC: 5 | RNVC: 9

23 Nov 1995

5340-14-471-6908
Angle Bracket

144716908
508100-00: RNCC: 3 | RNVC: 2
508100-00: RNCC: 3 | RNVC: 2
Z00.N7087780000: RNCC: 5 | RNVC: 2
3117307: RNCC: 5 | RNVC: 2
Z00.N7087780000TBM: RNCC: 5 | RNVC: 9

7 Sep 1994

5340-14-529-4054
Mounting Bracket

145294054
44040465: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-540-5082
Dust And Moisture Seal Protective Cover

145405082
4351465: RNCC: 3 | RNVC: 2

1 Apr 2004

5340-14-551-3834
Mounting Bracket

145513834
44036781: RNCC: 3 | RNVC: 2

14 Sep 2006

5340-14-553-3921
Mounting Bracket

145533921
44038483: RNCC: 3 | RNVC: 2

29 Mar 2007

5340-14-553-3954
Mounting Bracket

145533954
44038481: RNCC: 3 | RNVC: 2

29 Mar 2007

5340-14-553-5011
Mounting Plate

145535011
4339151: RNCC: 3 | RNVC: 2

10 Apr 2007

5340-14-553-5124
Mounting Plate

145535124
4359365: RNCC: 3 | RNVC: 2

11 Apr 2007

5340-14-555-3007
Utility Resilient Mount

145553007
533707: RNCC: 3 | RNVC: 2

23 Oct 2007

5340-14-559-0133
Mounting Plate

145590133
F1464547: RNCC: 3 | RNVC: 2

27 Nov 2008

5340-14-585-8335
Quick Relea Plunger

5340-14-585-8499
Mechanical Stop

5340-14-547-3961
Mounting Bracket

145473961
4355344: RNCC: 3 | RNVC: 2

11 Oct 2005

5340-14-553-5104
Access Cover

145535104
4389744: RNCC: 3 | RNVC: 2

11 Apr 2007

5340-14-553-5181
Mounting Plate

145535181
4310698: RNCC: 3 | RNVC: 2

11 Apr 2007

5340-14-565-2625
Loop Clamp

145652625
10-480-006: RNCC: 3 | RNVC: 2

2 Aug 2010

5340-14-571-9639
Shelf Bracket

145719639
44037196: RNCC: 3 | RNVC: 2

29 May 2012

5340-14-300-8317
Multiple Angle Bracket

143008317
00110720061: RNCC: 3 | RNVC: 2
001107-200-61: RNCC: 5 | RNVC: 2
91376572: RNCC: 5 | RNVC: 2
00110720061: RNCC: 5 | RNVC: 2
1107B20: RNCC: 5 | RNVC: 2
NSA937915-20: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-368-9038
Dust And Moisture Seal Protective Cap-Plug

143689038
N100-1500: RNCC: 3 | RNVC: 2
1500: RNCC: 5 | RNVC: 1
SYQ1124: RNCC: 5 | RNVC: 2
C100EM1500RO: RNCC: 5 | RNVC: 2

10 Mar 1981

5340-14-540-5076
Utility Resilient Mount

145405076
4351316: RNCC: 3 | RNVC: 2
5366564: RNCC: 5 | RNVC: 2

1 Apr 2004

5340-14-550-7540
Helical Compression Spring Seat

145507540
1216-005U004A: RNCC: 3 | RNVC: 2

12 Jul 2006

5340-14-552-2506
Lock-Release Lever

145522506
1216-131-000C: RNCC: 3 | RNVC: 2

6 Dec 2006

5340-14-553-5100
Access Cover

145535100
4389737: RNCC: 3 | RNVC: 2

11 Apr 2007

5340-14-569-4893
Mounting Bracket

145694893
44036215: RNCC: 3 | RNVC: 2

20 Sep 2011

5340-14-437-1006
Loop Clamp

144371006
MINUS-S8: RNCC: 3 | RNVC: 9
SX-8S-137-157-V6TH7: RNCC: 3 | RNVC: 9
07-00-404: RNCC: 5 | RNVC: 2
07.00.404: RNCC: 5 | RNVC: 2
MINUS137X157: RNCC: 5 | RNVC: 9
SERFLEX08137157: RNCC: 5 | RNVC: 9

17 Jan 1990

5340-14-478-8451
Spacing Threaded Standoff

144788451
44037370: RNCC: 3 | RNVC: 2
44037370: RNCC: 5 | RNVC: 9

23 Nov 1995

5340-14-482-1174
Locking Stay

144821174
1087-U1: RNCC: 3 | RNVC: 2
1087-U1: RNCC: 5 | RNVC: 2
SYB2049: RNCC: 5 | RNVC: 2
1087U1: RNCC: 5 | RNVC: 2

20 Jun 1996

5340-14-543-1119
Loop Clamp

145431119
4377356: RNCC: 3 | RNVC: 2

26 Aug 2004

5340-14-550-7617
Spring Holder

145507617
1216-005U001A: RNCC: 3 | RNVC: 2

12 Jul 2006

5340-14-540-5075
Utility Resilient Mount

145405075
4349229: RNCC: 3 | RNVC: 2
5364134: RNCC: 5 | RNVC: 2

1 Apr 2004

5340-14-553-5101
Helical Compression Spring Retainer

145535101
4310883: RNCC: 3 | RNVC: 2

11 Apr 2007

5340-14-553-5102
Helical Compression Spring Retainer

145535102
4314762: RNCC: 3 | RNVC: 2

11 Apr 2007

5340-14-559-0137
Mounting Plate

145590137
F1464545: RNCC: 3 | RNVC: 2

27 Nov 2008

5340-14-585-8578
Uti Resilient Mount

5340-14-581-5970
Nut And Bo Retainer

5340-14-294-6360
Dust And Moisture Seal Protective Cap-Plug

142946360
N100CL-226: RNCC: 3 | RNVC: 2
226: RNCC: 5 | RNVC: 2
N100-226CL: RNCC: 5 | RNVC: 2
N100-226: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-478-8353
Mounting Plate

144788353
44035939: RNCC: 3 | RNVC: 2
44035939: RNCC: 5 | RNVC: 9

23 Nov 1995

5340-14-420-2252
Protection Bellows

144202252
07.00.403: RNCC: 3 | RNVC: 2
07-00-403: RNCC: 3 | RNVC: 2

20 Aug 1998

5340-14-543-1422
Engine Plate

145431422
4383226: RNCC: 3 | RNVC: 2

26 Aug 2004

5340-14-547-7997
Catch Strike

145477997
44037382: RNCC: 3 | RNVC: 2

15 Nov 2005

5340-14-554-8242
Mounting Plate

145548242
4339144: RNCC: 3 | RNVC: 2

29 Aug 2007

5340-14-555-4253
Roller Holder

145554253
2035-142-600B: RNCC: 3 | RNVC: 2

8 Nov 2007

5340-14-585-8504
Mechanical Stop

5340-14-479-8886
Mounting Plate

144798886
19893: RNCC: 3 | RNVC: 2
19893-136: RNCC: 5 | RNVC: 2
19893: RNCC: 5 | RNVC: 9
19893-136: RNCC: 5 | RNVC: 9

13 Feb 1996

5340-14-522-5921
Loop Clamp

145225921
2481D302: RNCC: 3 | RNVC: 2

8 Nov 2000

5340-14-540-0736
Spring Holder

145400736
A36503: RNCC: 3 | RNVC: 2

4 Mar 2004

5340-14-530-3030
Dust And Moisture Seal Protective Cap

145303030
GA31504: RNCC: 3 | RNVC: 2

29 May 2002

5340-14-569-5720
Access Cover

145695720
5780107: RNCC: 3 | RNVC: 2

28 Sep 2011

5340-14-585-4450
Mounting Plate

5340-14-407-2585
Spacing Threaded Standoff

144072585
X245: RNCC: 3 | RNVC: 2
H14-7040/25: RNCC: 3 | RNVC: 2
ENINT13-25: RNCC: 3 | RNVC: 2
91351514: RNCC: 5 | RNVC: 2
99112916: RNCC: 5 | RNVC: 2
99112916: RNCC: 5 | RNVC: 9

12 Feb 1986

5340-14-551-3016
Helical Compression Spring Retainer

145513016
47248024: RNCC: 3 | RNVC: 2
47248024: RNCC: 5 | RNVC: 2

8 Sep 2006

5340-14-567-9140
Mounting Plate

145679140
41P5114: RNCC: 3 | RNVC: 2

21 Apr 2011

5340-14-571-9614
Pin Removable Head

145719614
47248014: RNCC: 3 | RNVC: 2

29 May 2012

5340-14-593-4707
Mounting Plate

5340-14-585-8377
Mechanical Fuse

5340-14-567-4187
Butt Hinge

145674187
340-074-505-0: RNCC: 3 | RNVC: 2

15 Mar 2011

5340-14-553-6131
Angle Bracket

145536131
56949154AA: RNCC: 3 | RNVC: 2

24 Apr 2007

5340-14-570-3827
Mounting Plate

145703827
4389803: RNCC: 3 | RNVC: 2

13 Dec 2011

5340-14-585-8474
Mounting Bracket

5340-14-540-0732
Dust And Moisture Seal Protective Plug

145400732
A36541: RNCC: 3 | RNVC: 2

4 Mar 2004

5340-14-324-7858
Plain Solid Disk

143247858
GSM163-003F17REP2: RNCC: 3 | RNVC: 2
GSM163-03F17REP2: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-573-1373
Access Cover

145731373
332A31-3288-20: RNCC: 3 | RNVC: 2
332A31328820: RNCC: 5 | RNVC: 2

18 Sep 2012

5340-14-566-8951
Flange Attachement

145668951
B001568: RNCC: 3 | RNVC: 2

12 Jan 2011

5340-14-346-5403
Plain Solid Disk

143465403
A0140-754: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-424-4947
Verrouillag Barreau

144244947
39456669: RNCC: 3 | RNVC: 2
39456669: RNCC: 3 | RNVC: 9

19 May 1988

5340-14-439-5680
Corrosion Preventive Anode

144395680
SFC1BW-2-80-A: RNCC: 3 | RNVC: 2

15 May 1990

5340-14-572-1414
Dust And Moisture Seal Protective Plug

145721414
332A72-2913-23: RNCC: 3 | RNVC: 2
332A72291323: RNCC: 5 | RNVC: 2

11 Jun 2012

5340-14-535-5995
Nut And Bolt Locking Plate

145355995
MAT321-0251: RNCC: 3 | RNVC: 2

6 Jun 2003

5340-14-437-4674
Turnbuckle

144374674
332A91-3006-00: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-385-9332

5340-14-306-1644

5340-14-403-5002
Carter De Protectio

144035002
26423625: RNCC: 3 | RNVC: 2
C423625: RNCC: 3 | RNVC: 2
26423625: RNCC: 5 | RNVC: 2
26423625: RNCC: 5 | RNVC: 9

21 Aug 1985

5340-14-314-3508

5340-14-577-1806
Mec Mechanical Fuse

145771806
12 17 48 00 00: RNCC: 3 | RNVC: 2

20 Aug 2013

5340-14-295-3446

5340-14-271-5466
Plaque A Tenon

142715466
262-12-51136-02: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-562-7294
Mounting Plate

145627294
694-1-31-014: RNCC: 3 | RNVC: 2

18 Nov 2009

5340-14-572-0687
Angle Bracket

145720687
332A72-2844-01: RNCC: 3 | RNVC: 2
332A72284401: RNCC: 5 | RNVC: 2

5 Jun 2012

5340-14-560-2078
Swivel Caster

145602078
91772232: RNCC: 1 | RNVC: 2
KP4BD125-28L: RNCC: 3 | RNVC: 2

2 Apr 2009

5340-14-362-9424
Dust And Moisture Seal Protective Plug

143629424
NO PRIMARY REF14-362-9424: RNCC: 3 | RNVC: 2
21867-2776: RNCC: 5 | RNVC: 9
21867-2776: RNCC: 5 | RNVC: 9
21867-2776: RNCC: 5 | RNVC: 9
85-689-1439: RNCC: 6 | RNVC: 9

19 Mar 1980

5340-14-532-3950
Double Angle Bracket

145323950
78691-21-38C14: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-272-6385
Patte De Fixation

142726385
160-63423-03: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-564-4014
Rod End Clevis

145644014
330A23-2074-21: RNCC: 3 | RNVC: 2

27 Apr 2010

5340-14-387-7827
Chape Double

143877827
ST159-2M368P14: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-14-495-1725
Colliers

144951725
NO PRIMARY REF14-495-1725: RNCC: 3 | RNVC: 2
CH258004: RNCC: 5 | RNVC: 9
F300 0T 018 6105: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-268-7172
Ressort Filtre A Hu

142687172
NO PRIMARY REF14-268-7172: RNCC: 3 | RNVC: 2
14-116-0: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-220-5028
Dust And Moisture Seal Protective Cap

142205028
610-111-015-0: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-572-5938
Pawl Fastener

145725938
1000-U546: RNCC: 3 | RNVC: 2
1000-U546: RNCC: 5 | RNVC: 2
CMPG00305: RNCC: 5 | RNVC: 2

16 Jul 2012

5340-14-376-7425
Butt Hinge Leaf

143767425
25110D3: RNCC: 2 | RNVC: 2
L25110-20X0-6DHA: RNCC: 5 | RNVC: 2

28 Apr 1982

5340-14-368-5327
Butt Hinge Leaf

143685327
EA1M601-50-860N1: RNCC: 3 | RNVC: 2
85-691-3675: RNCC: 6 | RNVC: 9

20 Feb 1981

5340-14-304-6954
Ball Socket Seat

143046954
410065-BZ: RNCC: 3 | RNVC: 2
410065: RNCC: 5 | RNVC: 2
410065: RNCC: 5 | RNVC: 2
410065-BZ: RNCC: 5 | RNVC: 2
410065: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-237-4743
Pochette Nue

142374743
3130S95-69-021: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-552-8164
Angle Bracket

145528164
44040470: RNCC: 3 | RNVC: 2

5 Feb 2007

5340-14-527-5072
Retaining Strap

145275072
MBEU161782: RNCC: 3 | RNVC: 2

30 Oct 2001

5340-14-552-9373
Mounting Bracket

145529373
47248023: RNCC: 3 | RNVC: 2

14 Feb 2007

5340-14-546-4458
Access Cover

145464458
44040535AA: RNCC: 3 | RNVC: 2
44040535AA: RNCC: 5 | RNVC: 2

6 Jul 2005

5340-14-478-8468
Loop Clamp

144788468
44039682: RNCC: 3 | RNVC: 2
44039682: RNCC: 5 | RNVC: 9

23 Nov 1995

5340-14-441-3932
Catch Strike

144413932
DA1D220000141A1: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-299-0852
Catch Strike

142990852
121E63-275-03-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-396-5601
Catch Strike

143965601
FF11G: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-344-3370
Catch Strike

143443370
A11A221221019: RNCC: 3 | RNVC: 2

10 Aug 1977

5340-14-474-8833
Chain Bolt

144748833
568095: RNCC: 3 | RNVC: 2

8 Mar 1995

5340-14-335-9318
Catch Strike

143359318
AC.150-ZB: RNCC: 3 | RNVC: 2
M4ZS420D2098: RNCC: 5 | RNVC: 2
AC150ZB: RNCC: 5 | RNVC: 2
77092857: RNCC: 5 | RNVC: 2

24 Jul 1976

5340-14-473-3843
Catch Strike

144733843
332A25-1343-21: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-281-5545
Catch Strike

142815545
STN156737: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-509-9847
Latch Bar

145099847
NO PRIMARY REF14-509-9847: RNCC: 3 | RNVC: 2
22895-04-U05: RNCC: 5 | RNVC: 9
5340AA1131752: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-412-2027
Catch Strike

144122027
330A25-0121-22: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-466-3381
Catch Strike

144663381
PM1A713163405A2: RNCC: 3 | RNVC: 2
PM1A713163405A2: RNCC: 5 | RNVC: 2
85-694-8949: RNCC: 6 | RNVC: 9

3 Nov 1993

5340-14-349-2355
Catch Strike

143492355
ST406M12P152: RNCC: 3 | RNVC: 2
T0UM12P152: RNCC: 5 | RNVC: 2

22 May 1978

5340-14-500-8592
Catch Strike

145008592
189E365-00: RNCC: 3 | RNVC: 2
189E365-00: RNCC: 5 | RNVC: 9
F300 0T 024 8795: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-451-2229
Spring Window Bolt

144512229
PM1A713310400: RNCC: 3 | RNVC: 2
PM1A713310400: RNCC: 5 | RNVC: 2

6 Nov 1991

5340-14-295-5092
Spring Window Bolt

142955092
341A25-1067-01: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-371-5827
Catch Strike

143715827
FH1E220-71: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-414-3347
Catch Strike

144143347
DA1D210263012: RNCC: 3 | RNVC: 2

28 Jan 1987

5340-14-471-2657
Catch Strike

144712657
504.0010: RNCC: 3 | RNVC: 2
517UF35: RNCC: 5 | RNVC: 2
5000723178: RNCC: 5 | RNVC: 2

10 Aug 1994

5340-14-473-3787
Catch Strike

144733787
332A22-1884-24: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-314-3243
Catch Strike

143143243
AC144ZB: RNCC: 3 | RNVC: 1
26256489: RNCC: 5 | RNVC: 2

1 Jan 1974

NSN 5340-14-353-2161 143532161 STRAP,WEBBING

5340-14-353-2161
Webbing Strap

143532161
356002030400: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-374-9544
Spring Window Bolt

143749544
345401010300: RNCC: 3 | RNVC: 2
85-691-7076: RNCC: 6 | RNVC: 9

30 Jan 1982

5340-14-534-8550
Barrel Bolt

145348550
10652906: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-14-371-3053
Catch Strike

143713053
5000253155: RNCC: 3 | RNVC: 2
5000253155: RNCC: 5 | RNVC: 9

5 Aug 1981

5340-14-473-3801
Catch Strike

144733801
332A23-0523-20: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-483-2081
Catch Strike

144832081
2672826: RNCC: 3 | RNVC: 2

27 Aug 1996

5340-14-310-7321
Catch Strike

143107321
8360: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-500-3721
Spring Window Bolt

145003721
D62101320000: RNCC: 3 | RNVC: 2
F300 0T 024 3821: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-524-9438
Catch Strike

145249438
350A25-1444-20: RNCC: 3 | RNVC: 2

3 May 2001

5340-14-271-5284
Barrel Bolt

142715284
BM101880: RNCC: 3 | RNVC: 2
BM101880: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-403-9306
Flush Bolt

144039306
33724: RNCC: 3 | RNVC: 2
501263: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-503-0206
Catch Strike

145030206
E7411541: RNCC: 3 | RNVC: 9

17 Dec 1997

5340-14-489-3902
Catch Strike

144893902
33.43663GA: RNCC: 3 | RNVC: 2
5010046550: RNCC: 5 | RNVC: 2
33-43663-GA: RNCC: 5 | RNVC: 2
F300 0T 012 4682: RNCC: 6 | RNVC: 9

16 Jul 1997

5340-14-514-9020
Catch Strike

145149020
AC.133-BR: RNCC: 3 | RNVC: 2
AC133BR: RNCC: 5 | RNVC: 2

23 Jun 1999

5340-14-554-4610
Catch Strike

145544610
350A25-1094-24: RNCC: 3 | RNVC: 2

11 Jul 2007

5340-14-386-9189
Barrel Bolt

143869189
5340CJVERROUBAI0NNETTEB0XD12X80: RNCC: 2 | RNVC: 2

24 Aug 1983

5340-14-330-9882
Spring Window Bolt

143309882
PAA65-09: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-521-6780
Catch Strike

145216780
970416: RNCC: 3 | RNVC: 2

4 Sep 2000

5340-14-445-2568
Barrel Bolt

144452568
51253: RNCC: 3 | RNVC: 2

6 Feb 1991

5340-14-417-1207
Catch Strike

144171207
BAZ2533: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-14-371-5464
Flush Bolt

143715464
365A25-3118-00: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-514-5005
Catch Strike

145145005
16-1-3633: RNCC: 3 | RNVC: 2

26 May 1999

5340-14-324-9937
Catch Strike

143249937
AC101IB: RNCC: 3 | RNVC: 2
AC101-1B: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-326-9395
Catch Strike

143269395
195046: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-413-4153
Flush Bolt

144134153
NO PRIMARY REF14-413-4153: RNCC: 3 | RNVC: 2
F44925: RNCC: 5 | RNVC: 9

9 Dec 1986

5340-14-276-3878
Barrel Bolt

142763878
202559: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-392-7750
Spring Window Bolt

143927750
233416: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-486-2590
Catch Strike

144862590
350A25-1529-21: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-459-6853
Catch Strike

144596853
A10123-03-1000P003: RNCC: 3 | RNVC: 2
44021430: RNCC: 3 | RNVC: 2
44021430: RNCC: 5 | RNVC: 9

10 Dec 1992

5340-14-285-1945
Catch Strike

142851945
A10-74-012-65-0: RNCC: 3 | RNVC: 2
A10-74-012-65-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-300-9432
Spring Window Bolt

143009432
341A91-0071-57: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-464-5014
Catch Strike

144645014
AC161IP: RNCC: 3 | RNVC: 2
1035442Y00: RNCC: 5 | RNVC: 2
91477891: RNCC: 5 | RNVC: 9

4 Aug 1993

5340-14-328-8999
Barrel Bolt

143288999
156-30CADMIE: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-375-9920
Catch Strike

143759920
LRAC89F1-161002: RNCC: 3 | RNVC: 2
161002: RNCC: 5 | RNVC: 2

30 Mar 1982

5340-14-328-9000
Barrel Bolt

143289000
156-40CADMIE: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-453-2594
Flush Bolt

144532594
16-1-3430: RNCC: 3 | RNVC: 2

12 Feb 1992

5340-14-471-6710
Barrel Bolt

144716710
7518470: RNCC: 3 | RNVC: 2
5000296614: RNCC: 5 | RNVC: 2
0C07518470: RNCC: 5 | RNVC: 2

7 Sep 1994

5340-14-362-0130
Barrel Bolt

143620130
23079570-1: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-403-9353
Flush Bolt

144039353
32899: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-345-1538
Catch Strike

143451538
FD1B212-56880: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-527-2728
Chain Bolt

145272728
19218808: RNCC: 3 | RNVC: 2

17 Oct 2001

5340-14-535-2572
Catch Strike

145352572
RA1M701205539: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-463-7168
Spring Window Bolt

144637168
200486: RNCC: 3 | RNVC: 2
89171318: RNCC: 5 | RNVC: 2

23 Jun 1993

5340-14-412-1448
Catch Strike

144121448
16-7-3352: RNCC: 3 | RNVC: 2
8921625524: RNCC: 5 | RNVC: 2

8 Oct 1986

5340-14-379-1310
Catch Strike

143791310
DA2C220000121: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-495-6650
Spring Window Bolt

144956650
16-2-3795: RNCC: 3 | RNVC: 2
H13520-62: RNCC: 3 | RNVC: 2
16-2-3795/AA: RNCC: 5 | RNVC: 2
F300 0T 019 5976: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-282-5750
Catch Strike

142825750
140374: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-457-5098
Catch Strike

144575098
644957: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-326-9802
Catch Strike

143269802
ST406M71P53: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-360-7115
Spring Window Bolt

143607115
BAZ2150: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-414-3930
Catch Strike

144143930
DA1D230319637: RNCC: 3 | RNVC: 2

28 Jan 1987

5340-14-503-7302
Spring Window Bolt

145037302
08.44902: RNCC: 3 | RNVC: 2
01236300: RNCC: 5 | RNVC: 2

28 Jan 1998

5340-14-542-5228
Catch Strike

145425228
24.44530GA: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-14-483-5994
Spring Window Bolt

144835994
JVFT132003: RNCC: 3 | RNVC: 2

19 Sep 1996

5340-14-317-9287
Catch Strike

143179287
341A25-1077-22: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-406-4464
Catch Strike

144064464
FA1R221-23843: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-381-4390
Catch Strike

143814390
AC.119-ZB: RNCC: 3 | RNVC: 2
AC119ZB: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-406-4511
Catch Strike

144064511
FB1C291-61970: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-388-8955
Spring Window Bolt

143888955
365A25-5000-01: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-202-1604
Catch Strike

142021604
3130S23-41-005: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-554-6880
Catch Strike

145546880
S521A1051118: RNCC: 3 | RNVC: 2

6 Aug 2007

5340-14-543-7249
Catch Strike

145437249
AMPC GENE E225310: RNCC: 3 | RNVC: 2

4 Dec 2004

5340-14-528-6073
Catch Strike

145286073
8034626B00: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-413-5590
Barrel Bolt

144135590
TYPE3D: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-459-6833
Catch Strike

144596833
A10140-03-0000P008: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-14-307-2443
Spring Window Bolt

143072443
3160S73-74-900-51: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-337-3702
Catch Strike

143373702
EA1M221-18-03: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-345-1556
Catch Strike

143451556
FD1B220-32: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-535-1656
Catch Strike

145351656
5000608098: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-394-1536
Barrel Bolt

143941536
J36-390-55LAIT0N: RNCC: 2 | RNVC: 2
TR1-55LAIT0N: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-528-4307
Catch Strike

145284307
324613: RNCC: 3 | RNVC: 2
324613: RNCC: 5 | RNVC: 9

29 Jan 2002

5340-14-298-1904
Catch Strike

142981904
23030380: RNCC: 3 | RNVC: 2
23030380-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-435-8879
Catch Strike

144358879
AC.167-ZB: RNCC: 3 | RNVC: 2
0241669L00: RNCC: 5 | RNVC: 2
AC167ZB: RNCC: 5 | RNVC: 2

28 Nov 1989

5340-14-225-8620
Catch Strike

142258620
3160S25-27-115: RNCC: 3 | RNVC: 2
3160-25-27-115: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-524-4142
Catch Strike

145244142
365A25-3184-20: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-14-490-1069
Catch Strike

144901069
350A25-1094-25: RNCC: 3 | RNVC: 2

15 Sep 1997

5340-14-459-3629
Catch Strike

144593629
318591: RNCC: 3 | RNVC: 2
318591: RNCC: 5 | RNVC: 9

26 Nov 1992

5340-14-511-0791
Spring Window Bolt

145110791
2150037: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-14-380-2846
Catch Strike

143802846
365A21-3556-20: RNCC: 3 | RNVC: 2

8 Nov 1982

5340-14-450-2153
Catch Strike

144502153
BAZ92642: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-286-4681
Spring Window Bolt

142864681
341A25-1067-02: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-281-2254
Catch Strike

142812254
10200027: RNCC: 3 | RNVC: 2
10200027: RNCC: 5 | RNVC: 2
CHR10200027: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-352-7259
Catch Strike

143527259
573898435: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-305-4035
Catch Strike

143054035
49-05-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-434-4854
Catch Strike

144344854
DA1D230323307A2: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-371-5826
Catch Strike

143715826
FH1E220-70: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-351-1849
Catch Strike

143511849
AC.117-ZB: RNCC: 3 | RNVC: 2
45530: RNCC: 3 | RNVC: 2
AC117ZB: RNCC: 5 | RNVC: 2
427745: RNCC: 5 | RNVC: 9

10 Aug 1978

5340-14-540-8025
Catch Strike

145408025
272240: RNCC: 3 | RNVC: 2

23 Apr 2004

5340-14-534-5468
Catch Strike

145345468
16-7-3349: RNCC: 3 | RNVC: 2

26 Mar 2003

5340-14-344-9946
Catch Strike

143449946
459714: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-406-4410
Catch Strike

144064410
F221-23841: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-525-8113
Catch Strike

145258113
H116184: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-413-9177
Catch Strike

144139177
22373: RNCC: 3 | RNVC: 2
7700519754: RNCC: 5 | RNVC: 2

22 Jan 1987

5340-14-459-6816
Catch Strike

144596816
A10125-03-0000P003: RNCC: 3 | RNVC: 2
44026664: RNCC: 3 | RNVC: 2
44026664: RNCC: 5 | RNVC: 9

10 Dec 1992

5340-14-502-9965
Catch Strike

145029965
330A22-2441-00: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-258-5092
Catch Strike

142585092
C241291: RNCC: 3 | RNVC: 2
26241291: RNCC: 5 | RNVC: 2
C241291: RNCC: 5 | RNVC: 2
540204: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-217-9080
Catch Strike

142179080
3160S25-16-115: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-349-1345
Catch Strike

143491345
AC.160-CB: RNCC: 3 | RNVC: 2
AC160CB: RNCC: 5 | RNVC: 2
1664-016: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-418-0244
Catch Strike

144180244
9164-20: RNCC: 3 | RNVC: 2
7920064924: RNCC: 5 | RNVC: 2

6 Aug 1987

5340-14-310-6259
Catch Strike

143106259
GP8-108: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-301-5394
Barrel Bolt

143015394
1570-40MM: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-266-0908
Catch Strike

142660908
40606-5: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-419-0887
Catch Strike

144190887
30/14215ZB: RNCC: 3 | RNVC: 2
3275ZB: RNCC: 5 | RNVC: 2

30 Sep 1987

5340-14-463-0368
Catch Strike

144630368
AC137BR: RNCC: 3 | RNVC: 2

12 May 1993

5340-14-460-3933
Catch Strike

144603933
44021408: RNCC: 3 | RNVC: 2
A10111-01-1010P001: RNCC: 3 | RNVC: 2
44021408: RNCC: 5 | RNVC: 9

21 Jan 1993

5340-14-390-9390
Barrel Bolt

143909390
B1: RNCC: 3 | RNVC: 2

1 Mar 1984

5340-14-422-5689
Catch Strike

144225689
4772102310: RNCC: 3 | RNVC: 2

10 Mar 1988

5340-14-397-7682
Catch Strike

143977682
46559008: RNCC: 3 | RNVC: 2

16 Jan 1985

5340-14-533-8753
Catch Strike

145338753
12-400-912: RNCC: 3 | RNVC: 2
SZ12.400.912: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-553-6856
Catch Strike

145536856
82173587000: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-414-3981
Catch Strike

144143981
DA1D230320637U1: RNCC: 3 | RNVC: 2

28 Jan 1987

5340-14-466-1807
Catch Strike

144661807
161907: RNCC: 3 | RNVC: 2
89169838: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-448-0332
Spring Window Bolt

144480332
PM1A233237: RNCC: 3 | RNVC: 2
PM1A233237: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-463-2218
Catch Strike

144632218
44021423: RNCC: 3 | RNVC: 2
44021423: RNCC: 5 | RNVC: 9

26 May 1993

5340-14-371-3702
Catch Strike

143713702
365822: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-444-5715
Catch Strike

144445715
57178: RNCC: 3 | RNVC: 9

15 Jan 1991

5340-14-344-7343
Catch Strike

143447343
EA1M881-020: RNCC: 3 | RNVC: 2

9 Sep 1977

5340-14-309-9920
Spring Window Bolt

143099920
79576-12: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-513-8595
Catch Strike

145138595
642754: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-409-9075
Catch Strike

144099075
9164-21: RNCC: 3 | RNVC: 2
9250947180: RNCC: 5 | RNVC: 2

4 Jun 1986

5340-14-382-3521
Catch Strike

143823521
400444: RNCC: 3 | RNVC: 2
BGE400444: RNCC: 3 | RNVC: 2
MAF0001005190: RNCC: 6 | RNVC: 9

17 Feb 1983

5340-14-320-4673
Catch Strike

143204673
458984: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-409-4327
Catch Strike

144094327
337/8: RNCC: 3 | RNVC: 2
U401859887: RNCC: 5 | RNVC: 2
U401861853: RNCC: 5 | RNVC: 2
U401859887: RNCC: 5 | RNVC: 2
U401861853: RNCC: 5 | RNVC: 2

28 May 1986

5340-14-412-2141
Catch Strike

144122141
332A22-1412-22: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-345-2885
Catch Strike

143452885
FB1A880-082: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-362-9746
Catch Strike

143629746
0000659306: RNCC: 3 | RNVC: 2
0000659306: RNCC: 5 | RNVC: 9
659306: RNCC: 5 | RNVC: 9

3 Apr 1980

5340-14-469-1869
Catch Strike

144691869
1067414R00: RNCC: 3 | RNVC: 2

13 Apr 1994

5340-14-476-6816
Catch Strike

144766816
6010-12-JA: RNCC: 3 | RNVC: 2
1034903P00: RNCC: 5 | RNVC: 2
821226: RNCC: 5 | RNVC: 2

28 Jun 1995

5340-14-533-8696
Catch Strike

145338696
12-725-174G: RNCC: 3 | RNVC: 2
SZ12.725.174G: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-448-0301
Catch Strike

144480301
PM1A233194001: RNCC: 3 | RNVC: 2
PM1A233194001: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-418-0485
Catch Strike

144180485
8654-13: RNCC: 3 | RNVC: 2
7384856003: RNCC: 5 | RNVC: 2

6 Aug 1987

5340-14-414-3925
Catch Strike

144143925
DA1D230319531U1: RNCC: 3 | RNVC: 2

28 Jan 1987

5340-14-473-3779
Catch Strike

144733779
332A21-3290-20: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-524-5566
Catch Strike

145245566
365A25-3483-20: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-14-416-6978
Catch Strike

144166978
532486: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-345-7324
Spring Window Bolt

143457324
22351: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-535-1723
Catch Strike

145351723
5000115378: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-483-4743
Catch Strike

144834743
47134081: RNCC: 3 | RNVC: 2

12 Sep 1996

5340-14-360-2914
Catch Strike

143602914
22748: RNCC: 3 | RNVC: 2
5410744: RNCC: 5 | RNVC: 2
5410744V: RNCC: 5 | RNVC: 2

23 Nov 1979

5340-14-439-2642
Catch Strike

144392642
DA2C283400171: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-455-9119
Catch Strike

144559119
PM1A233194001A2: RNCC: 3 | RNVC: 2
PM1A233194001A2: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-362-2782
Catch Strike

143622782
330A58-6044-00: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-364-6790
Hasp Staple

143646790
82340: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-14-357-6186
Catch Strike

143576186
TL800-7-1: RNCC: 3 | RNVC: 2

27 Jun 1979

5340-14-457-6102
Catch Strike

144576102
PM1A713163405A1: RNCC: 3 | RNVC: 2
PM1A713163405A1: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-414-3928
Catch Strike

144143928
DA1D230319635: RNCC: 3 | RNVC: 2

28 Jan 1987

5340-14-520-7152
Catch Strike

145207152
46239350: RNCC: 3 | RNVC: 2

5 Jun 2000

5340-14-403-8575
Catch Strike

144038575
GACHE795: RNCC: 3 | RNVC: 2

28 Aug 1985

5340-14-354-2354
Catch Strike

143542354
16320825: RNCC: 3 | RNVC: 2
16320825: RNCC: 5 | RNVC: 9

30 Jan 1979

5340-14-484-8790
Catch Strike

144848790
1744950: RNCC: 3 | RNVC: 2

12 Dec 1996

5340-14-551-2057
Catch Strike

145512057
4CR105I4P: RNCC: 3 | RNVC: 2

6 Sep 2006

5340-14-384-9167
Spring Window Bolt

143849167
DA2C250531400: RNCC: 3 | RNVC: 2

2 Jun 1983

5340-14-496-9359
Catch Strike

144969359
AC124IB: RNCC: 3 | RNVC: 2
F300 0T 022 2903: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-530-1173
Catch Strike

145301173
444257: RNCC: 3 | RNVC: 2

14 May 2002

5340-14-446-7987
Catch Strike

144467987
516110: RNCC: 3 | RNVC: 2
SOG516110: RNCC: 5 | RNVC: 9
85-694-5892: RNCC: 6 | RNVC: 9

16 Apr 1991

5340-14-425-2005
Flush Bolt

144252005
4225-611A507: RNCC: 3 | RNVC: 2
4225-611A507: RNCC: 5 | RNVC: 2

24 Jun 1988

5340-14-419-0906
Catch Strike

144190906
4CR134ZB: RNCC: 3 | RNVC: 2
1039518M00: RNCC: 5 | RNVC: 2
0049418: RNCC: 5 | RNVC: 2

30 Sep 1987

5340-14-407-6283
Control Rod

144076283
020861: RNCC: 3 | RNVC: 2
20M41015: RNCC: 5 | RNVC: 9
020861: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-14-504-9359
Catch Strike

145049359
GACHE91126X00: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-297-4712
Barrel Bolt

142974712
3S011946: RNCC: 3 | RNVC: 9

1 Jan 1973

5340-14-433-4640
Catch Strike

144334640
071422B: RNCC: 3 | RNVC: 2

31 Jul 1989

5340-14-310-6334
Catch Strike

143106334
184589: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-442-0761
Barrel Bolt

144420761
6725-2000-6: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-437-5351
Catch Strike

144375351
F00056359: RNCC: 3 | RNVC: 2
F00056359: RNCC: 5 | RNVC: 9

7 Feb 1990

5340-14-356-2242
Barrel Bolt

143562242
70-291-681: RNCC: 3 | RNVC: 2

25 Apr 1979

5340-14-266-0905
Catch Strike

142660905
50675D17: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-476-4984
Catch Strike

144764984
45212249: RNCC: 3 | RNVC: 2
45212249: RNCC: 3 | RNVC: 9

14 Jun 1995

5340-14-356-8095
Catch Strike

143568095
TL800-6-1: RNCC: 3 | RNVC: 2

15 May 1979

5340-14-402-7341
Spring Window Bolt

144027341
607408: RNCC: 3 | RNVC: 2

19 Jul 1985

5340-14-351-8857
Mortise Bolt

143518857
289G: RNCC: 3 | RNVC: 9
470G: RNCC: 5 | RNVC: 9

16 Oct 1978

5340-14-403-2610
Spring Window Bolt

144032610
16806624: RNCC: 3 | RNVC: 2
16806624: RNCC: 3 | RNVC: 9

31 Jul 1985

5340-14-414-3924
Catch Strike

144143924
DA1D230319531: RNCC: 3 | RNVC: 2

28 Jan 1987

NSN 5340-14-382-2101 143822101 STRIKE,CATCH

5340-14-382-2101
Catch Strike

143822101
507: RNCC: 3 | RNVC: 2
507-23: RNCC: 5 | RNVC: 2
86002940: RNCC: 5 | RNVC: 2
5516002940: RNCC: 5 | RNVC: 2
5516002940: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-446-5066
Dashpot

144465066
10032130: RNCC: 3 | RNVC: 2

20 Mar 1991

5340-14-544-0853
Shelf Bracket

145440853
SUS0009-YA: RNCC: 3 | RNVC: 2

3 Jan 2005

5340-14-400-2580
Access Cover

144002580
0292701110: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-434-9450
Clamp Bolt Assembly

144349450
PL1BV3010A600030: RNCC: 3 | RNVC: 2

10 Oct 1989

5340-14-413-2605
Clamping Catch

144132605
8163431: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-14-554-3294
Mounting Bracket

145543294
82188352000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-477-6048
Access Cover

144776048
FE689ME0001: RNCC: 3 | RNVC: 2
FE689ME0001: RNCC: 5 | RNVC: 9

13 Sep 1995

5340-14-427-1969
Angle Bracket

144271969
A11A221230082N1: RNCC: 3 | RNVC: 2

6 Oct 1988

5340-14-414-5694
Retaining Strap

144145694
407521: RNCC: 3 | RNVC: 2

11 Feb 1987

5340-14-524-1972
Access Cover

145241972
10531818: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-202-5350
Loop Clamp

142025350
51113105026: RNCC: 3 | RNVC: 2
25G26: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-14-487-5554
Mounting Plate

144875554
78736TK050A15XA: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-474-8087
Plug Button

144748087
59822152: RNCC: 3 | RNVC: 9

1 Mar 1995

5340-14-447-4749
Loop Clamp

144474749
BK15A60004F15BDF10REP1A4: RNCC: 3 | RNVC: 2

15 May 1991

5340-14-409-0941
Anchor Strap

144090941
4771621020: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-407-7445
Anchor Strap

144077445
545725: RNCC: 3 | RNVC: 2

27 Feb 1986

5340-14-359-6076
Access Cover

143596076
705440034: RNCC: 3 | RNVC: 2

15 Oct 1979

5340-14-397-2888
Mounting Plate

143972888
79090438: RNCC: 3 | RNVC: 2
79090438: RNCC: 5 | RNVC: 2

1 Dec 1984

5340-14-552-9479
Mounting Plate

145529479
44040227: RNCC: 3 | RNVC: 2

15 Feb 2007

5340-14-526-3836
Mounting Bracket

145263836
44040352: RNCC: 3 | RNVC: 2

25 Jul 2001

5340-14-455-1304
Mounting Bracket

144551304
ST159-2M664P239: RNCC: 3 | RNVC: 2
4201246P081: RNCC: 5 | RNVC: 2

1 May 1992

5340-14-531-2170
Mounting Bracket

145312170
341A64-5034-24: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-441-6204
Mounting Plate

144416204
332A93-3403-21: RNCC: 3 | RNVC: 2

5 Sep 1990

5340-14-503-2818
Bumper

145032818
332P87-0026-64: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-299-9216
Threaded Rod End

142999216
M5BA451-20-822: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-476-8413
Mounting Bracket

144768413
724-629: RNCC: 3 | RNVC: 2

5 Jul 1995

5340-14-440-3188
Bumper

144403188
332A58-4568-21: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-299-9871
Buckle

142999871
32114-018: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-469-6356
Butt Hinge

144696356
MS7524-4CA1830: RNCC: 3 | RNVC: 2
MS7524-4CA: RNCC: 5 | RNVC: 2
MS7524-4CA: RNCC: 5 | RNVC: 2
MS7524-4CA1830: RNCC: 5 | RNVC: 2

4 May 1994

5340-14-282-8550
Loop Clamp

142828550
51100005045: RNCC: 3 | RNVC: 2
15N45: RNCC: 5 | RNVC: 2
A0021-15N45: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-509-6847
Loop Clamp

145096847
3-22609-12-50A: RNCC: 3 | RNVC: 2
3-22609-12-50A: RNCC: 5 | RNVC: 2

28 Oct 1998

5340-14-324-0820
Control Rod

143240820
A0188-006F20: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-370-6324
Loop Clamp

143706324
ASNA0022-75N40: RNCC: 1 | RNVC: 2
61100005040: RNCC: 3 | RNVC: 2
A0022-75N40: RNCC: 5 | RNVC: 2
75N40: RNCC: 5 | RNVC: 2
A0022-75N40: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-461-4523
Access Cover

144614523
BC100A270-122: RNCC: 3 | RNVC: 9
1003875N00: RNCC: 5 | RNVC: 2

10 Mar 1993

5340-14-555-8649
Mounting Bracket

145558649
82050130000: RNCC: 3 | RNVC: 2

19 Dec 2007

5340-14-299-3357
Mending Plate

142993357
MY20552-8507: RNCC: 3 | RNVC: 2
MY20-552-85-07: RNCC: 5 | RNVC: 2

1 Jan 1973

Load More Results