What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 116 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 116 of 446

5340-14-540-0020
Mounting Bracket

145400020
6501DOC211001: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-364-5908
Angle Bracket

143645908
5000116576: RNCC: 3 | RNVC: 2
5000116576: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-325-9137
Key Blank

143259137
25511B14X14XC38: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-477-8383
Runner

144778383
101160121071: RNCC: 3 | RNVC: 2

27 Sep 1995

5340-14-476-0893
Mounting Plate

144760893
222-3017-815: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-500-9154
Angle Bracket

145009154
D66504630000: RNCC: 3 | RNVC: 2
F300 0T 024 9363: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-549-4753
Mounting Bracket

145494753
0202147430: RNCC: 3 | RNVC: 2

7 Apr 2006

5340-14-509-6421
Mounting Plate

145096421
FH152802210: RNCC: 3 | RNVC: 2
FH152802200: RNCC: 3 | RNVC: 9

28 Oct 1998

5340-14-347-3163
Angle Bracket

143473163
021057601001: RNCC: 3 | RNVC: 2
021057601001: RNCC: 5 | RNVC: 2

19 Jan 1978

5340-14-555-8881
Mounting Plate

145558881
0292117140: RNCC: 3 | RNVC: 2

2 Jan 2008

5340-14-544-4149
Mounting Bracket

145444149
10681768000: RNCC: 3 | RNVC: 2

28 Jan 2005

5340-14-527-2652
Retaining Strap

145272652
94GR17: RNCC: 3 | RNVC: 9

17 Oct 2001

5340-14-482-6200
Mounting Bracket

144826200
39375075: RNCC: 3 | RNVC: 2

18 Jul 1996

5340-14-535-2411
Mounting Plate

145352411
6501BTV120007: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-536-3413
Mounting Plate

145363413
0000290-1957: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-14-467-6242
Mounting Bracket

144676242
622644: RNCC: 3 | RNVC: 2
622644: RNCC: 5 | RNVC: 9

19 Jan 1994

5340-14-510-0248
Mounting Bracket

145100248
3CGF52A2-60A: RNCC: 3 | RNVC: 2
1005AA2015432: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-455-8647
Mounting Bracket

144558647
564363: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-547-8212
Locking Stay

145478212
C-C-60185-B: RNCC: 3 | RNVC: 2

17 Nov 2005

5340-14-468-6789
Mounting Plate

144686789
A81513-2: RNCC: 3 | RNVC: 2

16 Mar 1994

5340-14-384-9041
Butt Hinge

143849041
DA2C291261005: RNCC: 3 | RNVC: 2

2 Jun 1983

5340-14-402-3194
Quick Release Pin

144023194
0219456G00: RNCC: 3 | RNVC: 2
51453S10R80N: RNCC: 5 | RNVC: 2

3 Jul 1985

5340-14-448-4822
Retaining Strap

144484822
5516011555: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-14-525-7830
Mounting Plate

145257830
F116097: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-547-5380
Angle Bracket

145475380
RA1M704755617A1N1: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-504-6548
Mounting Plate

145046548
45104350: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-14-549-8516
Mounting Bracket

145498516
2092283: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-554-8839
Loop Clamp

145548839
78651DH5AG: RNCC: 1 | RNVC: 2
78651DH5AG: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-485-6196
Mounting Plate

144856196
3BM01044AAAA: RNCC: 3 | RNVC: 2
3BM01044AAAA: RNCC: 5 | RNVC: 9

6 Feb 1997

5340-14-297-4201
Bumper

142974201
1025: RNCC: 3 | RNVC: 2
838: RNCC: 3 | RNVC: 2
1025: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-549-0872
Angle Bracket

145490872
RA1M704855421N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-514-1552
Access Cover

145141552
2001: RNCC: 3 | RNVC: 2

28 Apr 1999

5340-14-522-6955
Pipe Hanger

145226955
01248008: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-14-391-6118
Mounting Plate

143916118
16006325: RNCC: 3 | RNVC: 2
16006325: RNCC: 5 | RNVC: 9

21 Mar 1984

5340-14-282-5322
Angle Bracket

142825322
9131338: RNCC: 3 | RNVC: 2
9131338: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-515-6387
Mounting Plate

145156387
7P9681: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-404-7097
Angle Bracket

144047097
20777734: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-505-1860
Rigid Caster

145051860
8005641N00: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-481-3699
Mounting Bracket

144813699
10287309: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-423-3219
Retaining Strap

144233219
JWAT90: RNCC: 3 | RNVC: 2

14 Apr 1988

5340-14-408-4331
Retaining Strap

144084331
031576: RNCC: 3 | RNVC: 2
31576: RNCC: 5 | RNVC: 2
31576: RNCC: 5 | RNVC: 2
3245060315764: RNCC: 5 | RNVC: 2
5322814: RNCC: 5 | RNVC: 9
LG31576: RNCC: 5 | RNVC: 9

26 Mar 1986

5340-14-518-8429
Mounting Plate

145188429
464771: RNCC: 3 | RNVC: 2

23 Feb 2000

5340-14-511-6468
Mounting Bracket

145116468
1-625-09-03-1: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-425-3537
Loop Clamp

144253537
50011-1-16: RNCC: 3 | RNVC: 2
NSA935807-16: RNCC: 5 | RNVC: 2
50011-1-16: RNCC: 5 | RNVC: 9

30 Jun 1988

5340-14-531-8196
Mounting Bracket

145318196
341A62-5004-00: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-14-457-0141
Mounting Plate

144570141
TS4105-1: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-14-467-4092
Access Cover

144674092
1049618B00: RNCC: 3 | RNVC: 2
MAT460-02-03-A: RNCC: 5 | RNVC: 2

12 Jan 1994

5340-14-494-0781
Mounting Plate

144940781
NO PRIMARY REF14-494-0781: RNCC: 3 | RNVC: 2
LA01PD040304: RNCC: 5 | RNVC: 9
F300 0T 015 3492: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-338-8980
Retaining Strap

143388980
0294350110: RNCC: 3 | RNVC: 2
302-263-301P: RNCC: 5 | RNVC: 2

17 Dec 1976

5340-14-542-1192
Utility Access Door

145421192
27119942-7: RNCC: 3 | RNVC: 2

7 Jul 2004

5340-14-469-0968
Mounting Bracket

144690968
301-553-811-0: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-14-441-3386
Angle Bracket

144413386
78702-050A: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-479-5127
Mounting Bracket

144795127
23626950-2: RNCC: 3 | RNVC: 2

17 Jan 1996

5340-14-553-2260
Mounting Bracket

145532260
267E766-00: RNCC: 3 | RNVC: 2

15 Mar 2007

5340-14-263-8790
Retaining Strap

142638790
17-7-2784: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-277-6659
Retaining Strap

142776659
160-78649: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-457-5157
Mounting Plate

144575157
645946: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-440-7141
Bumper

144407141
00307800034: RNCC: 3 | RNVC: 2

18 Jul 1990

5340-14-520-6213
Mending Plate

145206213
C46305-2: RNCC: 3 | RNVC: 2

24 May 2000

5340-14-317-6537
Rod End Clevis

143176537
NO PRIMARY REF14-317-6537: RNCC: 3 | RNVC: 2
155H594: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-540-1584
Retaining Strap

145401584
61484724AA: RNCC: 3 | RNVC: 2

11 Mar 2004

5340-14-332-8373
Mending Plate

143328373
83308: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-345-5402
Loop Clamp

143455402
A0022-75N18: RNCC: 3 | RNVC: 2
55217-218DB: RNCC: 5 | RNVC: 2
A0022-75-18: RNCC: 5 | RNVC: 2
55217-218-001DB: RNCC: 5 | RNVC: 2
85-686-9963: RNCC: 6 | RNVC: 9
85-687-4457: RNCC: 6 | RNVC: 9

5 Oct 1977

5340-14-540-1385
Bolt And Spacer Kit

145401385
8040956E00: RNCC: 3 | RNVC: 2

11 Mar 2004

5340-14-505-5156
Mounting Plate

145055156
220271: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-335-2967
Angle Bracket

143352967
171745: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-311-9407
Rim Lock Set

143119407
EL11AP: RNCC: 3 | RNVC: 2
16295527: RNCC: 5 | RNVC: 2
91436020: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-382-9875
Retaining Strap

143829875
094027D: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-523-1874
Mounting Plate

145231874
45710266: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-475-1254
Magnetic Catch

144751254
BS6: RNCC: 3 | RNVC: 2

21 Mar 1995

5340-14-539-5020
Bridge Clamp

145395020
MECZ7365: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-14-539-5893
Access Cover

145395893
61231797AA: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-505-0106
Mounting Plate

145050106
5010116383: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-434-9102
Mounting Plate

144349102
018293C01TRA: RNCC: 3 | RNVC: 2
018293C: RNCC: 5 | RNVC: 2

9 Oct 1989

5340-14-539-9937
Pipe Hanger

145399937
553149: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-480-0629
Mounting Bracket

144800629
10280300: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-518-2589
Mounting Plate

145182589
5010099929: RNCC: 3 | RNVC: 2

1 Feb 2000

5340-14-537-5026
Handwheel

145375026
2344: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-537-9992
Mounting Plate

145379992
8009150E00: RNCC: 3 | RNVC: 2

9 Dec 2003

5340-14-502-8396
Bow Handle

145028396
9R4888: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-300-3341
Runner

143003341
15144120: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-442-8754
Pipe Hanger

144428754
20329658: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-14-339-5755
Angle Bracket

143395755
10-113: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-537-9047
Retaining Strap

145379047
10426603: RNCC: 3 | RNVC: 2

3 Dec 2003

5340-14-274-1815
Threaded Rod End

142741815
17517D: RNCC: 3 | RNVC: 9

1 Jan 1971

5340-14-455-7434
Protection Bellows

144557434
5413272: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-543-4495
Mounting Plate

145434495
AL100579: RNCC: 3 | RNVC: 2

30 Oct 2004

5340-14-522-0721
Mounting Bracket

145220721
20855697: RNCC: 3 | RNVC: 2

3 Oct 2000

5340-14-503-9906
Blank Panel

145039906
PLAQU93559A00: RNCC: 3 | RNVC: 2

4 Feb 1998

5340-14-483-8034
Mounting Bracket

144838034
8000732D00: RNCC: 3 | RNVC: 2

3 Oct 1996

5340-14-311-4745
Tubular Fairlead

143114745
68620A1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-537-7353
Mounting Bracket

145377353
PCS238: RNCC: 3 | RNVC: 2

19 Nov 2003

5340-14-395-9752
Leaf Spring

143959752
5000516147: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-514-4398
Mounting Bracket

145144398
009560001P: RNCC: 3 | RNVC: 2

25 May 1999

5340-14-259-7751
Angle Bracket

142597751
153571: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-351-0405
Bail Handle

143510405
BTP51: RNCC: 3 | RNVC: 9
RASBTP51: RNCC: 5 | RNVC: 9

10 Aug 1978

5340-14-461-3912
Loop Clamp

144613912
NSA5516C18NV: RNCC: 3 | RNVC: 2
NSA5516C18NV: RNCC: 5 | RNVC: 2

10 Mar 1993

5340-14-543-2059
Mounting Bracket

145432059
X26003: RNCC: 3 | RNVC: 2

31 Aug 2004

5340-14-361-7239
Anchor Strap

143617239
0018750317: RNCC: 3 | RNVC: 2
0018750317: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-14-466-9531
Access Cover

144669531
45460577: RNCC: 3 | RNVC: 2

9 Dec 1993

5340-14-550-4998
Mounting Bracket

145504998
RA1M701852311A1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-400-8965
Control Rod

144008965
GAM054023001: RNCC: 3 | RNVC: 2

21 May 1985

5340-14-548-6388
Bumper

145486388
F27233000: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-399-4633
Retaining Strap

143994633
20232229: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-434-1923
Mending Plate

144341923
552860: RNCC: 3 | RNVC: 2

12 Sep 1989

5340-14-465-8827
Mounting Bracket

144658827
5220208: RNCC: 3 | RNVC: 2

14 Oct 1993

5340-14-424-2667
Mounting Bracket

144242667
159300: RNCC: 3 | RNVC: 9
89404627: RNCC: 5 | RNVC: 2
159300: RNCC: 5 | RNVC: 9

19 May 1988

5340-14-287-8879
Rod End Clevis

142878879
019-1CN: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-430-3128
Access Cover

144303128
29689099: RNCC: 3 | RNVC: 2

15 Mar 1989

5340-14-493-5920
Access Cover

144935920
DSGD5: RNCC: 3 | RNVC: 2
F300 0T 013 7091: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-382-9278
Access Cover

143829278
4770216300: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-338-7300
Anchor Strap

143387300
181686: RNCC: 3 | RNVC: 2
5171526100: RNCC: 3 | RNVC: 2
715261: RNCC: 5 | RNVC: 2

17 Dec 1976

5340-14-418-9244
Rod End Clevis

144189244
DA2C111317815U1: RNCC: 3 | RNVC: 2

16 Sep 1987

5340-14-320-5920
Access Door Hinge

143205920
0000727289: RNCC: 3 | RNVC: 2
727289: RNCC: 5 | RNVC: 9
0000727289: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-436-0946
Angle Bracket

144360946
H80370-6-7-8: RNCC: 3 | RNVC: 2

5 Dec 1989

5340-14-324-1011
Retaining Strap

143241011
466-9M5P228: RNCC: 3 | RNVC: 2
466-9M5P228: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-554-8027
Mounting Bracket

145548027
1SH41852600: RNCC: 3 | RNVC: 2

27 Aug 2007

5340-14-318-0653
Mounting Bracket

143180653
0235287400: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-364-4995
Access Cover

143644995
FE3968-1: RNCC: 3 | RNVC: 9

2 Sep 1980

5340-14-478-7010
Handwheel

144787010
671 100: RNCC: 3 | RNVC: 2
1014676A00: RNCC: 5 | RNVC: 2
671100: RNCC: 5 | RNVC: 2

17 Nov 1995

5340-14-404-6392
Bumper

144046392
4125: RNCC: 3 | RNVC: 2
50971: RNCC: 5 | RNVC: 9

20 Nov 1985

5340-14-468-0772
Mounting Bracket

144680772
LYN008055020601: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-476-2816
Stake Driving Cap

144762816
13606: RNCC: 3 | RNVC: 2
2008406: RNCC: 5 | RNVC: 2
13606: RNCC: 5 | RNVC: 9

1 Jun 1995

5340-14-541-9795
Mounting Plate

145419795
20024-220: RNCC: 3 | RNVC: 2
502103005003A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-460-9172
Angle Bracket

144609172
TB4011875: RNCC: 3 | RNVC: 2

16 Feb 1993

5340-14-462-7355
Angle Bracket

144627355
PM1A713100062: RNCC: 3 | RNVC: 2
PM1A713100062: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-14-459-1577
Mounting Plate

144591577
16787469: RNCC: 3 | RNVC: 2

19 Nov 1992

5340-14-555-7454
Access Cover

145557454
0177550080: RNCC: 3 | RNVC: 2

11 Dec 2007

5340-14-449-5982
Access Cover

144495982
29695769: RNCC: 3 | RNVC: 2

28 Aug 1991

5340-14-549-8569
Access Cover

145498569
2092324: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-336-7768
Webbing Strap

143367768
190413: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-523-7154
Access Cover

145237154
S8328293: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-525-2741
Access Cover

145252741
10516077: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-502-6938
Access Cover

145026938
1051845: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-515-6456
Mounting Plate

145156456
BM994284: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-439-1935
Access Cover

144391935
16006794: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-546-6893
Access Cover

145466893
5010631634: RNCC: 3 | RNVC: 2

2 Aug 2005

5340-14-207-0505
Access Cover

142070505
0000351831: RNCC: 3 | RNVC: 2
0000351831: RNCC: 5 | RNVC: 9
351831: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-488-1521
Access Cover

144881521
0320730270: RNCC: 3 | RNVC: 2

18 Apr 1997

5340-14-523-2555
Angle Bracket

145232555
RA1M702846130: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-540-8262
Access Cover

145408262
X1568296: RNCC: 3 | RNVC: 2

23 Apr 2004

5340-14-445-0566
Mounting Bracket

144450566
154479: RNCC: 3 | RNVC: 2

31 Jan 1991

5340-14-353-1466
Anchor Strap

143531466
160218: RNCC: 3 | RNVC: 2
160218: RNCC: 5 | RNVC: 2

8 Dec 1978

5340-14-550-4658
Angle Bracket

145504658
RA1B701305121: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-544-3645
Mounting Bracket

145443645
T212A2001223: RNCC: 3 | RNVC: 2

24 Jan 2005

5340-14-385-0945
Clamp Bolt Assembly

143850945
M4DW1201501320: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-483-4140
Blank Panel

144834140
TOL00787: RNCC: 3 | RNVC: 2

12 Sep 1996

5340-14-540-6581
Clamping Catch

145406581
BLC9914: RNCC: 3 | RNVC: 2

15 Apr 2004

5340-14-527-1892
Butt Hinge

145271892
10579136: RNCC: 3 | RNVC: 2

10 Oct 2001

5340-14-401-5455
Retaining Strap

144015455
217930: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-332-6071
Angle Bracket

143326071
14-23254502: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-509-9954
Expansion Shield

145099954
E17: RNCC: 3 | RNVC: 2
5340AA1132613: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-476-2578
Control Rod

144762578
91387315: RNCC: 3 | RNVC: 2

31 May 1995

5340-14-406-0808
Webbing Strap

144060808
415290: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-383-5158
Loop Clamp

143835158
20189132: RNCC: 3 | RNVC: 2
20189132: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-435-4783
Retaining Strap

144354783
DA2C201721514: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-14-549-7624
Cover Strip

145497624
S521A1051154: RNCC: 3 | RNVC: 2

10 May 2006

5340-14-539-9850
Angle Bracket

145399850
RN271/0109: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-542-2975
Mounting Bracket

145422975
948240908: RNCC: 3 | RNVC: 2
948240908: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-257-5999
Rod End Clevis

142575999
2562P41-2: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-418-3364
Anchor Strap

144183364
5-455832: RNCC: 3 | RNVC: 9
5-455832: RNCC: 5 | RNVC: 2
5-455832: RNCC: 5 | RNVC: 9

12 Aug 1987

5340-14-434-5684
Mounting Bracket

144345684
54111-845-1: RNCC: 3 | RNVC: 9

20 Sep 1989

5340-14-504-4212
Angle Bracket

145044212
92104-8: RNCC: 3 | RNVC: 2

16 Feb 1998

5340-14-553-6861
Mounting Bracket

145536861
82179024000: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-434-9241
Mounting Plate

144349241
3511 191 77351: RNCC: 3 | RNVC: 2
3511 191 77351: RNCC: 5 | RNVC: 2

10 Oct 1989

5340-14-454-2279
Mounting Bracket

144542279
413202040001: RNCC: 3 | RNVC: 2
5044585: RNCC: 5 | RNVC: 9

26 Mar 1992

5340-14-410-1992
Mounting Plate

144101992
120133: RNCC: 3 | RNVC: 2

16 Jun 1986

5340-14-407-5238
Runner

144075238
20724547-7: RNCC: 3 | RNVC: 2
724547: RNCC: 5 | RNVC: 2

27 Feb 1986

5340-14-228-3237
Bumper

142283237
3415: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-553-4457
Angle Bracket

145534457
DE2B236600408: RNCC: 3 | RNVC: 2

4 Apr 2007

5340-14-496-0914
Flush Catch

144960914
1610773: RNCC: 3 | RNVC: 2
F300 0T 020 8857: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-435-0899
Access Cover

144350899
853-700-469-0: RNCC: 3 | RNVC: 2

18 Oct 1989

5340-14-267-5212
Loop Clamp

142675212
03135016300: RNCC: 3 | RNVC: 2
49J331: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-514-0535
Section Block Clamp

145140535
RA1M703854159N1: RNCC: 3 | RNVC: 2

22 Apr 1999

5340-14-447-2735
Compression Cup

144472735
S4086-1: RNCC: 3 | RNVC: 2

15 May 1991

5340-14-266-4007
Handwheel

142664007
A30050-8: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-230-5302
Loop Clamp

142305302
0202117050: RNCC: 3 | RNVC: 2
202-11-705: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-323-6784
Angle Bracket

143236784
A800-019: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-362-2770
Mending Plate

143622770
330A22-2322-21: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-464-0870
Mounting Bracket

144640870
CC15546-1SC1: RNCC: 3 | RNVC: 2

15 Jul 1993

5340-14-437-4491
Mounting Bracket

144374491
332A61-2333-04: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-396-6562
Loop Clamp

143966562
785-405: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-533-9801
Access Cover

145339801
452-15736-001: RNCC: 3 | RNVC: 2
452-15736-001: RNCC: 5 | RNVC: 2

5 Mar 2003

5340-14-482-3415
Dashpot

144823415
LVA3/4X2S: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-14-533-4168
Runner

145334168
A22-010754: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-394-7818
Access Cover

143947818
J05150-04-0100P011: RNCC: 3 | RNVC: 2

28 Aug 1984

5340-14-411-6909
Anchor Strap

144116909
P9C004037-00: RNCC: 3 | RNVC: 9

27 Aug 1986

5340-14-244-9944
Rod End Clevis

142449944
321A13-0163-20: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-444-9018
Loop Clamp

144449018
BN329-518-F12-88,9: RNCC: 3 | RNVC: 2

28 Jan 1991

5340-14-439-0745
Bridge Clamp

144390745
5502-30-10: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-14-437-5791
Clamping Catch

144375791
GP.19-CH: RNCC: 3 | RNVC: 2
GP19CH: RNCC: 5 | RNVC: 2
91628988: RNCC: 5 | RNVC: 2

7 Feb 1990

5340-14-521-1914
Access Cover

145211914
EA5M211-27-833: RNCC: 3 | RNVC: 2

12 Jul 2000

5340-14-406-4343
Rod End Clevis

144064343
MY20714-65830: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-336-2234
Rod End Clevis

143362234
3160S23-11-820: RNCC: 3 | RNVC: 2
85-647-4350: RNCC: 6 | RNVC: 9

24 Jul 1976

5340-14-369-1616
Utility Access Door

143691616
365A84-3008-09: RNCC: 3 | RNVC: 2

14 Mar 1996

5340-14-340-9400
Access Cover

143409400
NO PRIMARY REF14-340-9400: RNCC: 3 | RNVC: 2
RT7673: RNCC: 5 | RNVC: 9

14 Feb 1977

5340-14-385-8864
Rod End Connector

143858864
59989: RNCC: 3 | RNVC: 9

24 Aug 1983

5340-14-224-0195
Handwheel

142240195
GSM137-001F12DET5AVECBOULEAS10G: RNCC: 3 | RNVC: 2
GSM137-01F12DET5AVECB0ULEAS10G: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-362-8245
Extension Shaft

143628245
GSM171-120BF16: RNCC: 3 | RNVC: 2

19 Mar 1980

5340-14-322-9959
Retaining Strap

143229959
150-75-1698: RNCC: 3 | RNVC: 2
150-75-11698: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-427-4926
Mounting Plate

144274926
20858388: RNCC: 3 | RNVC: 2
20858388: RNCC: 3 | RNVC: 9

20 Oct 1988

5340-14-503-9616
Surface Bolt

145039616
0075894: RNCC: 3 | RNVC: 2

4 Feb 1998

5340-14-540-7352
Mounting Bracket

145407352
38051115: RNCC: 3 | RNVC: 2
01046A: RNCC: 5 | RNVC: 2
4848ZG8613181054: RNCC: 6 | RNVC: 9

22 Apr 2004

5340-14-554-8813
Loop Clamp

145548813
78651DH6AG: RNCC: 1 | RNVC: 2
78651DH6AG: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-547-7220
Mounting Bracket

145477220
100 767 48: RNCC: 3 | RNVC: 2
AA018082: RNCC: 6 | RNVC: 9

7 Nov 2005

5340-14-210-5584
Loop Clamp

142105584
70855027: RNCC: 3 | RNVC: 2
70855027: RNCC: 5 | RNVC: 9
855027: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-348-7170
Bumper

143487170
2120010: RNCC: 3 | RNVC: 2
2120010: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-528-5305
Angle Bracket

145285305
45351404: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-236-1282
Retaining Strap

142361282
160-62453: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-540-7224
Access Cover

145407224
38051543: RNCC: 3 | RNVC: 2
ND064885: RNCC: 5 | RNVC: 2
4848ZG8613181305: RNCC: 6 | RNVC: 9

22 Apr 2004

5340-14-453-2713
Mounting Bracket

144532713
5000658577: RNCC: 3 | RNVC: 2
89287560: RNCC: 5 | RNVC: 2

12 Feb 1992

5340-14-442-9419
Access Cover

144429419
16623062: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-14-403-4990
Access Cover

144034990
22630601: RNCC: 3 | RNVC: 2
22630601: RNCC: 5 | RNVC: 9

21 Aug 1985

5340-14-379-3943
Plug Button

143793943
100650: RNCC: 3 | RNVC: 2
5516039581: RNCC: 5 | RNVC: 2
100760: RNCC: 5 | RNVC: 2
300650: RNCC: 5 | RNVC: 2
7700551538: RNCC: 5 | RNVC: 2
5516039581: RNCC: 5 | RNVC: 9

1 Oct 1982

5340-14-543-9743
Mounting Bracket

145439743
4773125960: RNCC: 3 | RNVC: 9

19 Dec 2004

5340-14-529-8541
Mounting Bracket

145298541
8545.675: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-350-0349
Synchro Clamp

143500349
0LAC08-522225N: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-475-0455
Blank Panel

144750455
10021388: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-14-545-6866
Mounting Bracket

145456866
RA1M703756411: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-519-6594
Detent Plunger

145196594
5010399402: RNCC: 3 | RNVC: 2

29 Mar 2000

5340-14-550-0485
Clamping Catch

145500485
33.43659: RNCC: 3 | RNVC: 2

31 May 2006

5340-14-522-7763
Mounting Bracket

145227763
46179399: RNCC: 3 | RNVC: 2

22 Nov 2000

5340-14-407-1919
Detent Plunger

144071919
600520: RNCC: 3 | RNVC: 2

12 Feb 1986

5340-14-539-3557
Blank Panel

145393557
AL100013: RNCC: 3 | RNVC: 2

7 Jan 2004

5340-14-426-1217
Protection Bellows

144261217
96117616: RNCC: 3 | RNVC: 2

4 Aug 1988

5340-14-397-1777
Bail Handle

143971777
B128ABC31: RNCC: 3 | RNVC: 2
B128ABC31: RNCC: 5 | RNVC: 9

1 Dec 1984

5340-14-343-1145
Angle Bracket

143431145
ST406M63P175: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-14-550-4809
Angle Bracket

145504809
RA1A702436155: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-461-1651
Angle Bracket

144611651
4772820210: RNCC: 3 | RNVC: 2
5046074: RNCC: 5 | RNVC: 9

24 Feb 1993

5340-14-214-3325
Retaining Strap

142143325
6011: RNCC: 3 | RNVC: 9
386352: RNCC: 5 | RNVC: 2
6011: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-348-5668
Retaining Strap

143485668
7400303131: RNCC: 3 | RNVC: 2
430602: RNCC: 5 | RNVC: 2

29 Mar 1978

5340-14-325-9135
Key Blank

143259135
25511B12X16XC38: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-541-6458
Access Cover

145416458
47176674: RNCC: 3 | RNVC: 2

17 Jun 2004

5340-14-460-9923
Access Cover

144609923
5000917305: RNCC: 3 | RNVC: 2

17 Feb 1993

5340-14-511-9064
Access Cover

145119064
941667314: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-14-458-4606
Plug Button

144584606
29219000: RNCC: 3 | RNVC: 2

23 Oct 1992

5340-14-527-3982
Access Cover

145273982
H77201: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-504-2474
Access Cover

145042474
3596781M94: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-446-8927
Anchor Strap

144468927
363708: RNCC: 3 | RNVC: 2
363708: RNCC: 5 | RNVC: 9

17 Apr 1991

5340-14-505-0174
Access Cover

145050174
5010120897: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-393-9268
Loop Clamp

143939268
61-1-128: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-369-2646
Utility Access Door

143692646
366A25-0015-11: RNCC: 3 | RNVC: 2

14 Mar 1996

5340-14-296-2061
Angle Bracket

142962061
121E63-203-21-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-542-0034
Mounting Plate

145420034
20041-439: RNCC: 3 | RNVC: 2
502106018035A: RNCC: 3 | RNVC: 9
2 0041-439: RNCC: 5 | RNVC: 2

2 Jul 2004

5340-14-507-9415
Access Cover

145079415
308875-N: RNCC: 3 | RNVC: 2
308875N: RNCC: 5 | RNVC: 9

26 Aug 1998

5340-14-473-0892
Blank Panel

144730892
920401122000: RNCC: 3 | RNVC: 2
89302189: RNCC: 5 | RNVC: 2
AS2-0.001.162: RNCC: 5 | RNVC: 2

7 Dec 1994

5340-14-425-0131
Loop Holder

144250131
JVCIT02-02-00: RNCC: 3 | RNVC: 2
89407125: RNCC: 5 | RNVC: 2

16 Jun 1988

5340-14-539-9854
Mounting Bracket

145399854
RN271/82812: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-434-1297
Shelf Bracket

144341297
332A25-1087-2001: RNCC: 3 | RNVC: 2

6 Sep 1989

5340-14-542-2978
Mounting Bracket

145422978
954591808: RNCC: 3 | RNVC: 2
954591808: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-353-7246
Loop Clamp

143537246
461103: RNCC: 3 | RNVC: 2
461103: RNCC: 5 | RNVC: 2

16 Jan 1979

5340-14-430-5064
Butt Hinge

144305064
PM1A125710022U1: RNCC: 3 | RNVC: 2
PM1A125710022U1: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-545-4070
Mounting Bracket

145454070
332A93-3193-00: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-373-7717
Loop Clamp

143737717
C6045-34BIS0: RNCC: 3 | RNVC: 2
C6045-34BM: RNCC: 5 | RNVC: 2
9560130270: RNCC: 5 | RNVC: 2

13 Nov 1981

5340-14-293-3957
Access Cover

142933957
015-03-00-02: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-547-4475
Mounting Plate

145474475
5010553328: RNCC: 3 | RNVC: 2

13 Oct 2005

5340-14-516-6606
Mounting Plate

145166606
46945424: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-14-524-6170
Mounting Plate

145246170
10555100: RNCC: 3 | RNVC: 2

29 Mar 2001

5340-14-433-2078
Retaining Strap

144332078
161N3X15: RNCC: 3 | RNVC: 2

17 Jul 1989

5340-14-509-0250
Mounting Plate

145090250
FH152810210: RNCC: 3 | RNVC: 2
FH152810200: RNCC: 3 | RNVC: 9

14 Oct 1998

5340-14-399-0502
Angle Bracket

143990502
474130J: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-541-0679
Butt Hinge

145410679
10672116000: RNCC: 3 | RNVC: 2

13 May 2004

5340-14-528-9932
Mounting Bracket

145289932
710394: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-14-519-2612
Mounting Bracket

145192612
163784: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-509-2075
Mounting Bracket

145092075
62099: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-508-5186
Mounting Plate

145085186
10467458: RNCC: 3 | RNVC: 2

16 Sep 1998

5340-14-553-3419
Bumper

145533419
06 08135 105: RNCC: 3 | RNVC: 2

26 Mar 2007

5340-14-539-5672
Mounting Plate

145395672
10623051: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-480-0630
Mounting Bracket

144800630
10280302: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-460-4369
Retaining Clip

144604369
96995446: RNCC: 3 | RNVC: 2

26 Jan 1993

5340-14-379-1565
Mounting Plate

143791565
0U406: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-455-3559
Runner

144553559
16591: RNCC: 3 | RNVC: 2

21 May 1992

5340-14-358-0891
Angle Bracket

143580891
18366: RNCC: 3 | RNVC: 2

6 Sep 2000

5340-14-369-9430
Retaining Strap

143699430
398002140002: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-553-1334
Mounting Bracket

145531334
14100009498: RNCC: 3 | RNVC: 2

6 Mar 2007

5340-14-451-5226
Mounting Bracket

144515226
549773: RNCC: 3 | RNVC: 2

21 Nov 1991

5340-14-322-9304
Bumper

143229304
214390: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-442-9955
Bow Handle

144429955
1989A107: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-14-503-0748
Mounting Bracket

145030748
46245994: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-418-9636
Control Rod

144189636
2416050009: RNCC: 3 | RNVC: 2
RAR3456: RNCC: 5 | RNVC: 2

21 Sep 1987

5340-14-549-1023
Section Block Clamp

145491023
RA1M703754125A2: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-551-4973
Angle Bracket

145514973
RA1A701966771: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-555-9712
Mounting Plate

145559712
401232: RNCC: 3 | RNVC: 2

16 Jan 2008

5340-14-424-3202
Retaining Strap

144243202
0308767020: RNCC: 3 | RNVC: 2
89404414: RNCC: 5 | RNVC: 2

19 May 1988

5340-14-541-9577
Mounting Plate

145419577
502118014064A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-536-3431
Mounting Bracket

145363431
0004836: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-14-397-6555
Control Rod

143976555
7881-1: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-14-464-9972
Blank Panel

144649972
365P-3851-20: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-392-8588
Runner

143928588
225138: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-331-0642
Retaining Strap

143310642
BAZ7953: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-472-4216
Mounting Plate

144724216
728084S213-05B: RNCC: 3 | RNVC: 2

21 Oct 1994

5340-14-476-8347
Mounting Bracket

144768347
711-922: RNCC: 3 | RNVC: 2

5 Jul 1995

5340-14-544-5623
Door Closer

145445623
350900: RNCC: 3 | RNVC: 2

10 Feb 2005

5340-14-485-9792
Mounting Bracket

144859792
577357: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-14-555-8862
Mounting Plate

145558862
0292104470: RNCC: 3 | RNVC: 2

2 Jan 2008

5340-14-460-2043
Mounting Plate

144602043
LN446008REP5: RNCC: 3 | RNVC: 2
RAB0289: RNCC: 5 | RNVC: 2
LN446-008REP5: RNCC: 5 | RNVC: 2

15 Jan 1993

5340-14-388-4577
Rod End Connector

143884577
02102006700: RNCC: 3 | RNVC: 2
021020067: RNCC: 5 | RNVC: 2

3 Nov 1983

5340-14-472-7124
Rod End Clevis

144727124
4089375: RNCC: 3 | RNVC: 2
EC4L480: RNCC: 3 | RNVC: 2
408937-5: RNCC: 5 | RNVC: 2
EC4L480: RNCC: 5 | RNVC: 9
408937-5: RNCC: 5 | RNVC: 9
4089375: RNCC: 5 | RNVC: 9

9 Nov 1994

5340-14-519-4696
Belt-Strap Keeper

145194696
11309022-160: RNCC: 3 | RNVC: 2
430508: RNCC: 5 | RNVC: 2
11309-160-022: RNCC: 5 | RNVC: 2

22 Mar 2000

5340-14-546-4218
Shelf Bracket

145464218
21251437-9: RNCC: 3 | RNVC: 2
21251436-00: RNCC: 3 | RNVC: 9
21251436-6: RNCC: 5 | RNVC: 2

4 Jul 2005

5340-14-479-7436
Protection Bellows

144797436
K15973PIN086-A: RNCC: 3 | RNVC: 2
P3-I9073020226-0: RNCC: 3 | RNVC: 9

2 Feb 1996

5340-14-453-3313
Bumper

144533313
9073/80: RNCC: 3 | RNVC: 2

17 Feb 1992

5340-14-370-0646
Access Cover

143700646
7123-572-00: RNCC: 3 | RNVC: 9
ROT7123-572-00: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-541-8352
Bridge Clamp

145418352
88179-1330: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-347-6557
Loop Clamp

143476557
70277305: RNCC: 3 | RNVC: 2
70277305: RNCC: 5 | RNVC: 9

1 Mar 1978

5340-14-316-2664
Mounting Bracket

143162664
0249967380: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-454-4810
Handle Grip

144544810
TB2030503: RNCC: 3 | RNVC: 2

2 Apr 1992

5340-14-459-6021
Retaining Strap

144596021
09512294934: RNCC: 3 | RNVC: 2
91607638: RNCC: 5 | RNVC: 2

10 Dec 1992

5340-14-454-0746
Retaining Strap

144540746
16130228: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-14-529-7500
Angle Bracket

145297500
COU002552052721: RNCC: 3 | RNVC: 2

9 Apr 2002

5340-14-554-6438
Clip Retainer Plate

145546438
0249920320: RNCC: 3 | RNVC: 2

30 Jul 2007

5340-14-505-2942
Corner Brace

145052942
2050181F: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-555-9072
Expansion Plug

145559072
031128: RNCC: 3 | RNVC: 2

7 Jan 2008

5340-14-365-7600
Webbing Strap

143657600
ST406M75A25: RNCC: 3 | RNVC: 2

8 Oct 1980

5340-14-554-8843
Loop Clamp

145548843
78651RH11CP: RNCC: 1 | RNVC: 2
78651RH11CP: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-418-5703
Mounting Plate

144185703
31731100: RNCC: 3 | RNVC: 9

2 Sep 1987

5340-14-546-1792
Angle Bracket

145461792
RA1B701396013A1: RNCC: 3 | RNVC: 2

15 Jun 2005

5340-14-383-0592
Detent Plunger

143830592
F47179: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-389-9263
Buckle

143899263
005437013P: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-427-9598
Mounting Bracket

144279598
532157: RNCC: 3 | RNVC: 2
89167752: RNCC: 5 | RNVC: 2

24 Nov 1988

5340-14-542-4816
Pipe Hanger

145424816
8044123X00: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-14-551-0316
Mounting Bracket

145510316
7420876653: RNCC: 3 | RNVC: 2

22 Aug 2006

5340-14-549-9791
Mounting Bracket

145499791
1091207: RNCC: 3 | RNVC: 2

22 May 2006

5340-14-549-8866
Mounting Plate

145498866
21106806: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-422-4354
Mounting Plate

144224354
151419: RNCC: 3 | RNVC: 2

3 Mar 1988

5340-14-341-7162
Mending Plate

143417162
16395454: RNCC: 3 | RNVC: 2
16395454: RNCC: 3 | RNVC: 9

14 Apr 1977

5340-14-533-8111
Mounting Bracket

145338111
8032764B00: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-545-5415
Mounting Bracket

145455415
7508912X00: RNCC: 3 | RNVC: 2

18 Apr 2005

5340-14-516-3631
Loop Clamp

145163631
CV17108: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-14-532-6883
Mounting Plate

145326883
211427: RNCC: 3 | RNVC: 2

2 Dec 2002

5340-14-366-9561
Bumper

143669561
19A2204: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-547-4546
Bumper

145474546
5010399990: RNCC: 3 | RNVC: 2

13 Oct 2005

5340-14-406-2141
Runner

144062141
2557022: RNCC: 3 | RNVC: 2
9950960029: RNCC: 5 | RNVC: 2
2557022: RNCC: 5 | RNVC: 2
22631362: RNCC: 5 | RNVC: 2

8 Jan 1986

5340-14-461-6131
Bridge Clamp

144616131
BLC236463: RNCC: 3 | RNVC: 2

17 Mar 1993

5340-14-488-6718
Handwheel

144886718
3BT01486AAAA: RNCC: 3 | RNVC: 2
3BT01486AAAA: RNCC: 5 | RNVC: 9

28 May 1997

5340-14-414-0079
Access Cover

144140079
237068: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-500-5525
Mounting Plate

145005525
E63707000007: RNCC: 3 | RNVC: 2
F300 0T 024 5708: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-489-4354
Access Cover

144894354
38513163: RNCC: 3 | RNVC: 2

23 Jul 1997

5340-14-352-7769
Rod End Clevis

143527769
270209: RNCC: 3 | RNVC: 2
270209: RNCC: 5 | RNVC: 2

14 Nov 1978

5340-14-492-4129
Access Cover

144924129
5000499620: RNCC: 3 | RNVC: 2
F300 0T 007 5910: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-409-8405
Access Cover

144098405
16629045: RNCC: 3 | RNVC: 2
16629045: RNCC: 5 | RNVC: 9

4 Jun 1986

5340-14-371-4449
Mounting Plate

143714449
26254708: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-310-2329
Access Cover

143102329
30122: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-304-8437
Access Cover

143048437
GSM1482DET19TIGE20: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-545-2475
Mounting Plate

145452475
S214A4001202: RNCC: 3 | RNVC: 2

29 Mar 2005

5340-14-359-2412
Angle Bracket

143592412
EA1M384: RNCC: 3 | RNVC: 2

2 Oct 1979

5340-14-528-5577
Access Cover

145285577
374145: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-524-8337
Mounting Plate

145248337
448169: RNCC: 3 | RNVC: 2

18 Apr 2001

5340-14-519-3326
Shelf Bracket

145193326
C212A1101213: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-484-1822
Access Cover

144841822
600542: RNCC: 3 | RNVC: 2

31 Oct 1996

5340-14-351-1244
Webbing Strap

143511244
120690: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-567-7612
Utility Access Door

145677612
M2512253600000: RNCC: 3 | RNVC: 2

11 Apr 2011

5340-14-313-7084
Mending Plate

143137084
0177310040: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-350-4608
Anchor Strap

143504608
216619: RNCC: 3 | RNVC: 2
MAF0001003577: RNCC: 6 | RNVC: 9

12 Jul 1978

5340-14-460-0128
Angle Bracket

144600128
39449871: RNCC: 3 | RNVC: 2
39449871: RNCC: 5 | RNVC: 9

7 Jan 1993

5340-14-476-0489
Cushioning Pad

144760489
5000502701: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-550-5007
Mounting Bracket

145505007
9428PHC161011: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-339-3366
Retaining Strap

143393366
163705: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-470-9984
Angle Bracket

144709984
DA4C314027013A1: RNCC: 3 | RNVC: 2

20 Jul 1994

5340-14-041-7261
Angle Bracket

140417261
95C12920T1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-423-0650
Runner

144230650
39530786: RNCC: 3 | RNVC: 2
39530786: RNCC: 5 | RNVC: 9

31 Mar 1988

5340-14-518-1569
Angle Bracket

145181569
5010054351: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-527-2653
Clamping Catch

145272653
94GR18: RNCC: 3 | RNVC: 2

17 Oct 2001

5340-14-476-0492
Cushioning Pad

144760492
5000602105: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-554-7489
Loop Clamp

145547489
DE2F203200028: RNCC: 3 | RNVC: 2

8 Aug 2007

5340-14-464-3402
Mounting Bracket

144643402
ST406M42P200: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-392-7887
Quick Release Pin

143927887
RASURAB2312: RNCC: 3 | RNVC: 2
B2312: RNCC: 5 | RNVC: 2

7 Apr 1984

5340-14-342-4473
Vent Plug

143424473
NO PRIMARY REF14-342-4473: RNCC: 3 | RNVC: 2
104033: RNCC: 5 | RNVC: 9
104033-01: RNCC: 5 | RNVC: 9

16 May 1977

5340-14-393-6284
Bumper

143936284
3030-6: RNCC: 3 | RNVC: 2

7 Jun 1984

5340-14-486-3018
Pawl Fastener

144863018
MB1587F00: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-490-3853
Access Cover

144903853
NO PRIMARY REF14-490-3853: RNCC: 3 | RNVC: 2
NNP5340844554470: RNCC: 5 | RNVC: 9

24 Sep 1997

5340-14-520-1682
Eye Hook

145201682
20859263: RNCC: 3 | RNVC: 2
20859263: RNCC: 3 | RNVC: 9

17 May 2000

5340-14-514-0753
Pawl Fastener Set

145140753
PM1A005001N05: RNCC: 3 | RNVC: 2
PM1A005001N05: RNCC: 5 | RNVC: 2
MJBN: RNCC: 5 | RNVC: 9

22 Apr 1999

5340-14-447-6041
Screw Hook

144476041
4CR127ZB: RNCC: 3 | RNVC: 2
LH935987ZB: RNCC: 3 | RNVC: 2

29 May 1991

5340-14-530-5138
Stand Base

145305138
23310026-9: RNCC: 3 | RNVC: 2

18 Jun 2002

5340-14-397-8281
Quick Release Pin

143978281
M4ZS645D1107B: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-438-8655
Pad Eye

144388655
TB2010409: RNCC: 3 | RNVC: 2

10 Apr 1990

5340-14-351-3700
Loop Clamp

143513700
620-857-902-0: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-420-7052
Loop Clamp

144207052
0000798219: RNCC: 3 | RNVC: 2
89414175: RNCC: 5 | RNVC: 2

16 Dec 1987

5340-14-417-0522
Angle Bracket

144170522
412902020003: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-14-566-6234
Utility Access Door

145666234
CRVT00592: RNCC: 3 | RNVC: 2

30 Nov 2010

5340-14-548-6192
Pipe Hanger

145486192
RA1B702606099: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-516-8584
Mounting Plate

145168584
101163921020: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-14-353-5716
Loop Clamp

143535716
5630: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-473-0156
Mounting Plate

144730156
SUF034055010420: RNCC: 3 | RNVC: 2

23 Nov 1994

5340-14-544-6819
Padlock Set

145446819
227 99: RNCC: 3 | RNVC: 2
22799: RNCC: 5 | RNVC: 2
AA004830: RNCC: 6 | RNVC: 9

17 Feb 2005

5340-14-433-8409
Bow Handle

144338409
RP969355: RNCC: 3 | RNVC: 2

16 Aug 1989

5340-14-357-7930
Split Tubular Clip

143577930
52988: RNCC: 3 | RNVC: 9
5000001120: RNCC: 5 | RNVC: 2
5000001120: RNCC: 5 | RNVC: 9

20 Jul 1979

5340-14-545-0414
Mounting Bracket

145450414
T322G1003809: RNCC: 3 | RNVC: 2

16 Mar 2005

5340-14-407-5278
Bail Handle

144075278
30312045CAA: RNCC: 3 | RNVC: 2

27 Feb 1986

5340-14-250-3285
Retaining Strap

142503285
ST406M52P585: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-474-9760
Protection Bellows

144749760
5574600: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-14-401-2997
Retaining Strap

144012997
606032: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-491-3257
Loop Clamp

144913257
0249990260: RNCC: 3 | RNVC: 2
F300 0T 002 2684: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-453-9820
Expansion Plug

144539820
HC-1/4BSPT-CO-40HRC: RNCC: 3 | RNVC: 2
RAR3491: RNCC: 5 | RNVC: 2

19 Mar 1992

5340-14-299-2404
Retaining Clip

142992404
NO PRIMARY REF14-299-2404: RNCC: 3 | RNVC: 2
94-01-00-0-0-11: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-382-5637
Angle Bracket

143825637
16901369: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-443-2942
Clamping Catch

144432942
701450004030: RNCC: 3 | RNVC: 2

14 Nov 1990

5340-14-293-9723
Control Rod

142939723
411MA0343F7REP1: RNCC: 3 | RNVC: 2
411MA343F7REP1: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-358-5239
Angle Bracket

143585239
456438175: RNCC: 3 | RNVC: 9

7 Sep 1979

5340-14-507-4546
Tee Hinge

145074546
56089709: RNCC: 3 | RNVC: 2

8 Jul 1998

5340-14-359-0548
Angle Bracket

143590548
77332-72: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-333-8515
Rod End Clevis

143338515
502-507-723-0: RNCC: 3 | RNVC: 2

23 Apr 1976

5340-14-435-3010
Mounting Plate

144353010
350A34-1029-20: RNCC: 3 | RNVC: 2

2 Nov 1989

5340-14-520-3092
Access Cover

145203092
23194343-9: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-499-4106
Access Door Hinge

144994106
A09030454: RNCC: 3 | RNVC: 2
14-7-3680: RNCC: 5 | RNVC: 9
A09030454: RNCC: 5 | RNVC: 9
F300 0T 022 0194: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-425-0146
Mending Plate

144250146
JVCIT03-06: RNCC: 3 | RNVC: 2
89415189: RNCC: 5 | RNVC: 2

16 Jun 1988

5340-14-400-7176
Mounting Plate

144007176
A16433-73: RNCC: 3 | RNVC: 2

8 May 1985

5340-14-382-9841
Mounting Plate

143829841
NO PRIMARY REF14-382-9841: RNCC: 3 | RNVC: 2
31835: RNCC: 5 | RNVC: 9

17 Mar 1983

5340-14-548-7442
Mounting Bracket

145487442
5021150030014A: RNCC: 3 | RNVC: 2
2 0021-773: RNCC: 3 | RNVC: 2

6 Feb 2006

5340-14-311-6847
Rod End Clevis

143116847
319A81-20-020: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-391-8481
Access Cover

143918481
4815-13: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-299-1418
Rod End Clevis

142991418
121E23-654-03-07: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-534-1346
Loop Holder

145341346
332P85-1011-02: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-313-7799
Access Cover

143137799
3511 130 59521: RNCC: 3 | RNVC: 2
3511-130-59521: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-249-8977
Expansion Plug

142498977
E29584A80AGT: RNCC: 2 | RNVC: 2
R93911-8A: RNCC: 5 | RNVC: 2
R93911A80AGT: RNCC: 5 | RNVC: 2
E29584-8A: RNCC: 5 | RNVC: 2
08017S66: RNCC: 5 | RNVC: 9
08017S66: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-316-5151
Bumper

143165151
321A21-0371-04: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-541-8370
Angle Bracket

145418370
88179-1368: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-531-9244
Access Cover

145319244
BRC77/001: RNCC: 3 | RNVC: 2

25 Sep 2002

5340-14-532-5562
Cover Strip

145325562
330A21-2615-66: RNCC: 3 | RNVC: 2

13 Nov 2002

5340-14-468-1906
Section Block Clamp

144681906
F706-88-01: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-425-3511
Loop Clamp

144253511
61114405035: RNCC: 3 | RNVC: 2
85J35: RNCC: 5 | RNVC: 2
NSA5517-38NJ: RNCC: 5 | RNVC: 2
NSA5517-38NJ: RNCC: 5 | RNVC: 2

30 Jun 1988

5340-14-311-4501
Loop Clamp

143114501
319A69-10-056: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-468-9971
Loop Clamp

144689971
110-635-23-12: RNCC: 3 | RNVC: 2
85-695-2035: RNCC: 6 | RNVC: 9

30 Mar 1994

5340-14-447-6283
Access Cover

144476283
692-81961-00: RNCC: 3 | RNVC: 2
91974971: RNCC: 5 | RNVC: 2
688-81961-01: RNCC: 5 | RNVC: 2
F300 0T 005 6064: RNCC: 6 | RNVC: 9

29 May 1991

5340-14-458-5035
Plate Spacer

144585035
6270-01144: RNCC: 3 | RNVC: 2

23 Oct 1992

5340-14-405-6685
Loop Clamp

144056685
MY20701-10813: RNCC: 3 | RNVC: 2

4 Dec 1985

5340-14-546-3019
Mounting Bracket

145463019
10645815: RNCC: 3 | RNVC: 2

22 Jun 2005

5340-14-466-3096
Angle Bracket

144663096
5230150: RNCC: 3 | RNVC: 2

3 Nov 1993

5340-14-476-6175
Loop Clamp

144766175
25G110: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-14-437-9940
Mounting Plate

144379940
1369412: RNCC: 3 | RNVC: 2
KACH412: RNCC: 5 | RNVC: 2

5 Mar 1990

5340-14-532-0609
Cover Strip

145320609
03-250-567: RNCC: 3 | RNVC: 2
SZ03.250.567: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-452-3673
Block Clamp

144523673
11211556069: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-535-2551
Cushioning Pad

145352551
6501BRC100002: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-552-1453
Mounting Plate

145521453
0249851840: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-14-524-5227
Section Block Clamp

145245227
809796: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-14-340-4594
Loop Clamp

143404594
70277308: RNCC: 3 | RNVC: 2
277308: RNCC: 5 | RNVC: 9
70277308: RNCC: 5 | RNVC: 9

14 Feb 1977

5340-14-425-5432
Access Cover

144255432
30337026G: RNCC: 3 | RNVC: 2

7 Jul 1988

5340-14-461-6500
Retaining Bail

144616500
PL1DA002OR901025A: RNCC: 3 | RNVC: 2

19 Mar 1993

5340-14-458-1441
Mounting Bracket

144581441
45215166: RNCC: 3 | RNVC: 2
45215166: RNCC: 5 | RNVC: 9

8 Oct 1992

5340-14-457-6175
Angle Bracket

144576175
PM1A888202: RNCC: 3 | RNVC: 2
PM1A888202: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-438-7225
Runner

144387225
29022946: RNCC: 3 | RNVC: 2

2 Apr 1990

5340-14-526-4575
Pipe Hanger

145264575
RA1M705445330: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-528-5356
Mounting Bracket

145285356
45710692: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-437-7553
Access Cover

144377553
NO PRIMARY REF14-437-7553: RNCC: 3 | RNVC: 2
27-12105-409-00: RNCC: 5 | RNVC: 9
85-694-3262: RNCC: 6 | RNVC: 9

16 Feb 1990

5340-14-482-9288
Pipe Hanger

144829288
78732-040-043B: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-488-1690
Loop Clamp

144881690
043-12-107: RNCC: 3 | RNVC: 2

18 Apr 1997

5340-14-455-5890
Mounting Bracket

144555890
092-400-00-02: RNCC: 3 | RNVC: 2
45611565: RNCC: 5 | RNVC: 2

28 May 1992

5340-14-300-4078
Runner

143004078
14-127-050-02: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-305-7948
Handwheel

143057948
NO PRIMARY REF14-305-7948: RNCC: 3 | RNVC: 2
19-180-145DETF: RNCC: 5 | RNVC: 9
19-190-190DETF: RNCC: 5 | RNVC: 9
19-190-210DETF: RNCC: 5 | RNVC: 9
19-225-240DETF: RNCC: 5 | RNVC: 9
19-270-270DETF: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-506-1602
Angle Bracket

145061602
458419: RNCC: 3 | RNVC: 2
458419-001: RNCC: 5 | RNVC: 9

8 Apr 1998

5340-14-031-8178
Detent Plunger

140318178
AM334-100: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-465-1479
Mounting Plate

144651479
365A23-1638-00: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-403-4845
Angle Bracket

144034845
NO PRIMARY REF14-403-4845: RNCC: 3 | RNVC: 2
P4H020390-00: RNCC: 5 | RNVC: 9

21 Aug 1985

5340-14-550-0123
Mounting Bracket

145500123
EA6M702-34-960: RNCC: 3 | RNVC: 2

24 May 2006

5340-14-312-8777
Angle Bracket

143128777
160-63194-26: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-305-9957
Access Cover

143059957
A10-63-602-00-0: RNCC: 3 | RNVC: 2
A10-63-602-00-0: RNCC: 5 | RNVC: 2

10 Apr 1997

5340-14-389-8533
Angle Bracket

143898533
M5BR882-005: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-357-3917
Bumper

143573917
EA1M452-11-812: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-444-5511
Webbing Strap

144445511
TB3011414: RNCC: 1 | RNVC: 2
LE13090-038-020: RNCC: 3 | RNVC: 2
5138: RNCC: 5 | RNVC: 2

15 Jan 1991

5340-14-327-7848
Butt Hinge

143277848
4003-25-2MLAIT0NP0LI: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-434-2208
Loop Clamp

144342208
30302263J: RNCC: 3 | RNVC: 2

13 Sep 1989

5340-14-342-4134
Snap Hook

143424134
140910: RNCC: 3 | RNVC: 2
STEL743: RNCC: 5 | RNVC: 2

16 May 1977

5340-14-539-3684
Bumper

145393684
459918: RNCC: 3 | RNVC: 2

8 Jan 2004

5340-14-458-6841
Angle Bracket

144586841
T942AA32: RNCC: 3 | RNVC: 2
5046585: RNCC: 5 | RNVC: 9
T942AA32: RNCC: 5 | RNVC: 9

29 Oct 1992

5340-14-459-4601
Angle Bracket

144594601
LN400011F9REPC3: RNCC: 3 | RNVC: 2
LN400011F4REPC3: RNCC: 5 | RNVC: 2

1 Dec 1992

5340-14-551-2879
Pipe Hanger

145512879
RA1B701676825: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-440-3415
Bridge Clamp

144403415
ETRIER REP5: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-528-9465
Loop Clamp

145289465
EN4113F04WH: RNCC: 2 | RNVC: 2

27 Feb 2002

5340-14-405-2389
Bow Handle

144052389
003268080P: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-482-7389
Mounting Plate

144827389
379211: RNCC: 3 | RNVC: 2

25 Jul 1996

5340-14-481-2578
Mounting Bracket

144812578
10018681: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-14-416-3144
Control Rod

144163144
14-15-194: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-346-2773
Mounting Bracket

143462773
300-677-701P: RNCC: 3 | RNVC: 2
001283010A: RNCC: 5 | RNVC: 2

12 Dec 1977

5340-14-336-7815
Angle Bracket

143367815
15155177: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-345-8528
Bow Handle

143458528
A11A261100029U1: RNCC: 3 | RNVC: 2

5 Nov 1977

5340-14-213-7670
Loop Clamp

142137670
0098900320: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-527-4193
Mending Plate

145274193
P106948V: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-341-0282
Detent Plunger

143410282
9H000751-02: RNCC: 3 | RNVC: 2
9H000751-02: RNCC: 5 | RNVC: 9

16 Mar 1977

5340-14-452-0837
Plate Spacer

144520837
A7292: RNCC: 3 | RNVC: 2

18 Dec 1991

5340-14-465-9541
Bumper

144659541
81000001: RNCC: 3 | RNVC: 2

22 Oct 1993

5340-14-527-2664
Swivel Caster

145272664
97GR05: RNCC: 3 | RNVC: 9

17 Oct 2001

5340-14-483-4376
Mounting Bracket

144834376
F125408: RNCC: 3 | RNVC: 2

12 Sep 1996

5340-14-539-5683
Mounting Plate

145395683
10461574: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-548-3279
Mounting Bracket

145483279
82150961000: RNCC: 3 | RNVC: 2

8 Jan 2006

5340-14-377-6482
Synchro Clamp

143776482
0098967180: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-430-4589
Mounting Bracket

144304589
572557: RNCC: 3 | RNVC: 2

22 Mar 1989

5340-14-480-3765
Angle Bracket

144803765
90 12 47: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-513-3850
Mounting Plate

145133850
DE33239: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-14-450-1713
Mounting Bracket

144501713
92PD260127: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-480-6271
Angle Bracket

144806271
2022084: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-378-8938
Anchor Strap

143788938
NO PRIMARY REF14-378-8938: RNCC: 3 | RNVC: 2
338-05131-0: RNCC: 5 | RNVC: 9
338051310: RNCC: 5 | RNVC: 9

6 Sep 1982

5340-14-449-6536
Protection Bellows

144496536
008584523: RNCC: 3 | RNVC: 9
8584523: RNCC: 5 | RNVC: 2

28 Aug 1991

5340-14-373-3122
Vent Plug

143733122
226942: RNCC: 3 | RNVC: 2
226942: RNCC: 5 | RNVC: 2
226942: RNCC: 5 | RNVC: 9

21 Oct 1981

5340-14-372-7904
Retaining Strap

143727904
650-403-068-0: RNCC: 3 | RNVC: 2

21 Sep 1981

5340-14-281-7315
Rim Latch Set

142817315
NO PRIMARY REF14-281-7315: RNCC: 3 | RNVC: 2
265BT38F0UGA: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-501-4518
Angle Bracket

145014518
307-841-303-0: RNCC: 3 | RNVC: 2

29 Oct 1997

5340-14-346-1903
Retaining Strap

143461903
HY182-6: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-454-8973
Runner

144548973
2085-05-006: RNCC: 3 | RNVC: 2
89411691: RNCC: 5 | RNVC: 9

24 Apr 1992

5340-14-485-0437
Swivel Caster

144850437
HP6BA125-23B: RNCC: 3 | RNVC: 2

19 Dec 1996

Load More Results