What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 115 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 115 of 446

5340-14-518-6108
Mounting Bracket

145186108
5010139150: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-458-6835
Mounting Plate

144586835
T634AB14: RNCC: 3 | RNVC: 2
T634AB14: RNCC: 5 | RNVC: 9
5046558: RNCC: 5 | RNVC: 9

29 Oct 1992

5340-14-375-0824
Strapping Seal

143750824
BOUCLEACIERCADMIE5MM: RNCC: 3 | RNVC: 2

30 Jan 1982

5340-14-410-1869
Mounting Plate

144101869
6105AABRIDEMN250: RNCC: 2 | RNVC: 2
6105AABRIDEMN250: RNCC: 5 | RNVC: 9

16 Jun 1986

5340-14-418-3344
Anchor Strap

144183344
4-455611: RNCC: 3 | RNVC: 9
4-455611: RNCC: 5 | RNVC: 2
4-455611: RNCC: 5 | RNVC: 9

12 Aug 1987

5340-14-482-0918
Shelf Bracket

144820918
22098148: RNCC: 3 | RNVC: 2
22098148: RNCC: 5 | RNVC: 9

20 Jun 1996

5340-14-351-2276
Mending Plate

143512276
24C6418: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-418-4917
Angle Bracket

144184917
26740: RNCC: 3 | RNVC: 2

26 Aug 1987

5340-14-461-7511
Mounting Bracket

144617511
3511 192 82721: RNCC: 3 | RNVC: 2
89433591: RNCC: 5 | RNVC: 2

24 Mar 1993

5340-14-461-2702
Retaining Strap

144612702
4771602690: RNCC: 3 | RNVC: 2
5045989: RNCC: 5 | RNVC: 9

3 Mar 1993

5340-14-554-2876
Mortise Lock

145542876
D450: RNCC: 3 | RNVC: 2

19 Jun 2007

5340-14-326-2754
Rod End Clevis

143262754
330A96-2005-54: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-416-3457
Control Rod

144163457
3626-0202: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-341-1902
Angle Bracket

143411902
M3E221-17-865: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-347-9622
Angle Bracket

143479622
6H001378-05: RNCC: 3 | RNVC: 2
6H001378-05: RNCC: 5 | RNVC: 9

29 Mar 1978

5340-14-438-4757
Mounting Plate

144384757
332A61-1268-20: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-531-8385
Mounting Bracket

145318385
341A89-1163-20: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-14-319-0152
Threaded Rod End

143190152
0RC5-30-05: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-442-7804
Arched Cushion

144427804
BA30089050-48: RNCC: 2 | RNVC: 2

5 Nov 1990

5340-14-410-5136
Loop Clamp

144105136
51313105043: RNCC: 3 | RNVC: 2
21G43: RNCC: 5 | RNVC: 2
85-801-1426: RNCC: 6 | RNVC: 9

2 Jul 1986

5340-14-230-1967
Retaining Band

142301967
DEN89-500: RNCC: 3 | RNVC: 2
2200023: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-485-5040
Angle Bracket

144855040
U522664: RNCC: 3 | RNVC: 2
P52256-64U: RNCC: 5 | RNVC: 2
U52256-64: RNCC: 5 | RNVC: 2

29 Jan 1997

5340-14-465-9385
Quick Release Pin

144659385
1670008: RNCC: 3 | RNVC: 2
ALG1670008: RNCC: 5 | RNVC: 9

20 Oct 1993

5340-14-300-6113
Retaining Strap

143006113
53315-8: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-397-5756
Rod End Connector

143975756
0000796070: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-14-412-2098
Runner

144122098
332A21-1395-25: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-456-6189
Angle Bracket

144566189
EQUERRE R100A: RNCC: 3 | RNVC: 2
U813010-00: RNCC: 3 | RNVC: 2

9 Jul 1992

5340-14-382-8224
Angle Bracket

143828224
NO PRIMARY REF14-382-8224: RNCC: 3 | RNVC: 2
RF72IMS2016RF: RNCC: 5 | RNVC: 2

17 Feb 1983

5340-14-464-9934
Mounting Plate

144649934
365A87-5063-25: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-470-9300
Mounting Bracket

144709300
332A61-1409-6201: RNCC: 3 | RNVC: 2
F300 0T 017 5452: RNCC: 5 | RNVC: 9

13 Jul 1994

5340-14-303-8286
Control Rod

143038286
NO PRIMARY REF14-303-8286: RNCC: 3 | RNVC: 2
550322: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-533-8609
Cover Strip

145338609
12-250-219: RNCC: 3 | RNVC: 2
SZ12.250.219: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-537-5264
Retaining Clip

145375264
6501LPP123: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-368-9438
Mounting Plate

143689438
15446211: RNCC: 3 | RNVC: 2
15446211: RNCC: 5 | RNVC: 2

10 Mar 1981

5340-14-525-6038
Mounting Plate

145256038
10 146 600 1050: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-472-9703
Angle Bracket

144729703
38512334: RNCC: 3 | RNVC: 2
38512334: RNCC: 5 | RNVC: 9

23 Nov 1994

5340-14-533-2015
Synchro Clamp

145332015
894166: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-433-9134
Angle Bracket

144339134
412703050702: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-14-353-6272
Rim Lock

143536272
0011730111: RNCC: 3 | RNVC: 2
0011730111: RNCC: 5 | RNVC: 9

16 Jan 1979

5340-14-356-5330
Retaining Strap

143565330
218: RNCC: 3 | RNVC: 2
218: RNCC: 5 | RNVC: 9

15 May 1979

5340-14-387-3476
Door Hook

143873476
F0A509R2: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-14-382-9267
Mending Plate

143829267
4770210980: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-412-7922
Mounting Plate

144127922
553926G0003: RNCC: 3 | RNVC: 2

5 Nov 1986

5340-14-497-8883
Rim Lock

144978883
21215: RNCC: 3 | RNVC: 2

22 Oct 1997

5340-14-445-5265
Access Cover

144455265
218519: RNCC: 3 | RNVC: 2
89289353: RNCC: 5 | RNVC: 2

14 Feb 1991

5340-14-415-6556
Threaded Rod End

144156556
MLA1470034: RNCC: 3 | RNVC: 2
MLA1470034: RNCC: 5 | RNVC: 2

18 May 1987

5340-14-520-4233
Access Cover

145204233
09.67.009.0424: RNCC: 3 | RNVC: 2
166512: RNCC: 3 | RNVC: 9

17 May 2000

5340-14-497-3954
Mounting Bracket

144973954
9010: RNCC: 3 | RNVC: 9
F300 0T 023 1223: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-519-5496
Access Cover

145195496
436281: RNCC: 3 | RNVC: 9

22 Mar 2000

5340-14-501-6509
Lock Bolt

145016509
1127: RNCC: 3 | RNVC: 2

5 Nov 1997

5340-14-400-0230
Access Cover

144000230
609229: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-240-6510
Access Cover

142406510
70663663: RNCC: 3 | RNVC: 2
70663663: RNCC: 5 | RNVC: 9
M807023: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-516-8301
Bumper

145168301
70159: RNCC: 3 | RNVC: 2
70159: RNCC: 5 | RNVC: 2

20 Oct 1999

5340-14-552-8843
Mounting Bracket

145528843
82036581000: RNCC: 3 | RNVC: 2

10 Feb 2007

5340-14-481-0965
Pipe Hanger

144810965
78733-032-031A: RNCC: 3 | RNVC: 2

18 Apr 1996

5340-14-448-9814
Anchor Strap

144489814
BAZ12176: RNCC: 3 | RNVC: 2

24 Jul 1991

5340-14-437-4992
Mounting Plate

144374992
NO PRIMARY REF14-437-4992: RNCC: 3 | RNVC: 2
100000789: RNCC: 5 | RNVC: 9
85-693-1543: RNCC: 6 | RNVC: 9

5 Feb 1990

5340-14-369-1248
Lock-Release Lever

143691248
MS810-06-02: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-412-1631
Access Cover

144121631
2100845: RNCC: 3 | RNVC: 2
100845F: RNCC: 5 | RNVC: 9

8 Oct 1986

5340-14-507-2091
Corner Brace

145072091
902-PDG-001-AA: RNCC: 3 | RNVC: 2

22 Jun 1998

5340-14-449-6438
Access Cover

144496438
1209614P002: RNCC: 3 | RNVC: 2

28 Aug 1991

5340-14-502-5813
Access Cover

145025813
5001826897: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-360-8080
Anchor Strap

143608080
130811: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-383-4402
Runner

143834402
045S03-576298M: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-513-1092
Loop Clamp

145131092
E27852BP060060Y: RNCC: 2 | RNVC: 2

3 Mar 1999

5340-14-533-6578
Metal Grille

145336578
F1260332: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-14-537-1786
Mounting Plate

145371786
MAT214-1427F10: RNCC: 3 | RNVC: 2

10 Oct 2003

5340-14-446-8913
Retaining Strap

144468913
058399Y22331: RNCC: 3 | RNVC: 2

17 Apr 1991

5340-14-266-3434
Butt Hinge

142663434
9035-19: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-238-3419
Mortise Latch

142383419
179480: RNCC: 3 | RNVC: 9
179480: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-541-9069
Expansion Shield

145419069
1762: RNCC: 3 | RNVC: 2
RAWLSET RS6: RNCC: 5 | RNVC: 2
RS6: RNCC: 5 | RNVC: 2
SC030958: RNCC: 6 | RNVC: 9

2 Jul 2004

5340-14-548-9016
Mounting Plate

145489016
10711209000: RNCC: 3 | RNVC: 2

22 Feb 2006

5340-14-505-0934
Mounting Plate

145050934
132865: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-531-5717
Mounting Bracket

145315717
008P666: RNCC: 3 | RNVC: 2

28 Aug 2002

5340-14-472-2188
Angle Bracket

144722188
16744527: RNCC: 3 | RNVC: 2

12 Oct 1994

5340-14-423-0463
Rod End Clevis

144230463
639100635: RNCC: 3 | RNVC: 2
89174119: RNCC: 5 | RNVC: 2
639100635: RNCC: 5 | RNVC: 9

31 Mar 1988

5340-14-361-1957
Runner

143611957
BAZ94210: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-207-7962
Loop Clamp

142077962
0000361728: RNCC: 3 | RNVC: 2
0000361728: RNCC: 5 | RNVC: 9
361728: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-032-0904
Retaining Strap

140320904
052496: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-417-9991
Runner

144179991
16744185: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-294-4050
Mending Plate

142944050
411878: RNCC: 3 | RNVC: 2
411878: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-378-0393
Retaining Strap

143780393
72160: RNCC: 3 | RNVC: 2
525787: RNCC: 5 | RNVC: 9

20 Jul 1982

5340-14-517-0021
Protection Bellows

145170021
RA1M701636010: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-516-7548
Mounting Bracket

145167548
10447187: RNCC: 3 | RNVC: 2

13 Oct 1999

5340-14-346-2159
Angle Bracket

143462159
26255018: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-353-2154
Webbing Strap

143532154
356002030003: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-385-0438
Loop Clamp

143850438
SP320DPPPAS: RNCC: 3 | RNVC: 2

2 Jun 1983

5340-14-452-2420
Mounting Plate

144522420
S10147: RNCC: 3 | RNVC: 9

8 Jan 1992

5340-14-493-7653
Mounting Plate

144937653
BLC23043: RNCC: 3 | RNVC: 2
F300 0T 013 9690: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-385-2184
Loop Clamp

143852184
53213110010: RNCC: 3 | RNVC: 2
310G3X10: RNCC: 5 | RNVC: 2

26 Jul 1983

5340-14-443-5169
Synchro Clamp

144435169
CAP230-70-17-01: RNCC: 3 | RNVC: 9
CAP230-70-17-01B: RNCC: 5 | RNVC: 9

27 Nov 1990

5340-14-395-1961
Rod End Clevis

143951961
242442: RNCC: 3 | RNVC: 2
85-692-6114: RNCC: 6 | RNVC: 9

2 Oct 1984

5340-14-440-4489
Bridge Clamp

144404489
6J8-43614-00: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-329-5467
Access Cover

143295467
T20-13C904: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-484-2630
Retaining Strap

144842630
650-403-252-0: RNCC: 3 | RNVC: 2

31 Oct 1996

5340-14-438-7754
Mounting Bracket

144387754
330A93-2044-12: RNCC: 3 | RNVC: 2

4 Apr 1990

5340-14-485-1104
Access Cover

144851104
1063313W01: RNCC: 3 | RNVC: 2

8 Jan 1997

5340-14-544-5637
Sliding Block

145445637
400421: RNCC: 3 | RNVC: 2

10 Feb 2005

5340-14-383-4172
Rod End Clevis

143834172
16763829: RNCC: 3 | RNVC: 2
16763829: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-317-7094
Handle Grip

143177094
466-8M16P158: RNCC: 3 | RNVC: 2
466-8M16P158: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-337-6626
Anchor Strap

143376626
0035665234: RNCC: 3 | RNVC: 2
0035665234: RNCC: 5 | RNVC: 9

6 Nov 1976

5340-14-531-1475
Bumper

145311475
TB4010103: RNCC: 3 | RNVC: 2

24 Jul 2002

5340-14-378-9707
Angle Bracket

143789707
004630010P: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-326-6872
Retaining Strap

143266872
274106: RNCC: 3 | RNVC: 2
274106: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-031-9155
Access Cover

140319155
162976: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-500-5537
Mounting Plate

145005537
E63707000003: RNCC: 3 | RNVC: 2
F300 0T 024 5720: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-043-1502
Rigid Caster

140431502
065U20-719863N: RNCC: 3 | RNVC: 2

10 Apr 1984

5340-14-510-6811
Access Cover

145106811
47063417: RNCC: 3 | RNVC: 2

4 Nov 1998

5340-14-552-4738
Block Clamp

145524738
S881A9801221: RNCC: 3 | RNVC: 2

8 Jan 2007

5340-14-545-2660
Mounting Bracket

145452660
S215A4052107: RNCC: 3 | RNVC: 2

30 Mar 2005

5340-14-472-2187
Runner

144722187
16744526: RNCC: 3 | RNVC: 2

12 Oct 1994

5340-14-482-0912
Mounting Plate

144820912
22097275: RNCC: 3 | RNVC: 2
22097275: RNCC: 5 | RNVC: 9

20 Jun 1996

5340-14-376-6579
Cane Bolt

143766579
420010H: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-503-9812
Loop Holder

145039812
POTEN93948A00: RNCC: 3 | RNVC: 2
POTEN93948X00: RNCC: 5 | RNVC: 9

4 Feb 1998

5340-14-429-1198
Loop Clamp

144291198
PA302: RNCC: 3 | RNVC: 2
PLC3663: RNCC: 5 | RNVC: 2

11 Jan 1989

5340-14-302-3070
Retaining Strap

143023070
205075: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-553-9647
Mounting Bracket

145539647
10505457001: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-14-409-8217
Mounting Plate

144098217
03702: RNCC: 3 | RNVC: 2
50091815: RNCC: 3 | RNVC: 2
50091815: RNCC: 5 | RNVC: 9

28 May 1986

5340-14-475-0879
Runner

144750879
1082470C00: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-14-554-2485
Webbing Strap

145542485
9405.49051: RNCC: 3 | RNVC: 2

14 Jun 2007

5340-14-449-8105
Shimmy Damper

144498105
786021S1: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-14-336-5094
Webbing Strap

143365094
190419: RNCC: 3 | RNVC: 2

14 Aug 1976

5340-14-513-5640
Retaining Bail

145135640
6152006: RNCC: 3 | RNVC: 2

24 Mar 1999

5340-14-543-2047
Mounting Bracket

145432047
X25991: RNCC: 3 | RNVC: 2

31 Aug 2004

5340-14-455-5987
Mounting Bracket

144555987
39087208: RNCC: 3 | RNVC: 2
39087208: RNCC: 5 | RNVC: 9

28 May 1992

5340-14-356-9772
Loop Clamp

143569772
S3DW3121310320: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-501-1069
Mounting Plate

145011069
07209015409: RNCC: 3 | RNVC: 2
F300 0T 025 1457: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-423-9474
Retaining Strap

144239474
535869: RNCC: 3 | RNVC: 2

5 May 1988

5340-14-354-7517
Anchor Strap

143547517
140778: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-384-7283
Mending Plate

143847283
20190928: RNCC: 3 | RNVC: 2
20190928: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-433-4883
Angle Bracket

144334883
022509X: RNCC: 3 | RNVC: 2

2 Aug 1989

5340-14-489-6092
Mounting Bracket

144896092
0301047240: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-522-6996
Access Cover

145226996
01681402: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-14-468-6474
Mounting Plate

144686474
008649222P: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-14-561-3570
Utility Resilient Mount

145613570
E1E11S38FC: RNCC: 3 | RNVC: 2
310600111386052: RNCC: 5 | RNVC: 2
E1E11S38FC: RNCC: 5 | RNVC: 2

8 Jul 2009

5340-14-217-9119
Cover Strip

142179119
3160S25-23-032: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-439-6392
Access Cover

144396392
360A25-1288-21: RNCC: 3 | RNVC: 2

16 May 1990

5340-14-337-6557
Access Cover

143376557
10866IZ1-10: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-551-3408
Angle Bracket

145513408
RA1A701316235: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-553-1616
Mounting Bracket

145531616
0249850700: RNCC: 3 | RNVC: 2

8 Mar 2007

5340-14-480-7851
Loop Clamp

144807851
EN4113S10NR: RNCC: 2 | RNVC: 2

29 Mar 1996

5340-14-552-6271
Lock-Release Lever

145526271
14100007481: RNCC: 3 | RNVC: 2

18 Jan 2007

5340-14-456-4422
Angle Bracket

144564422
T441AA19: RNCC: 3 | RNVC: 2
5045839: RNCC: 5 | RNVC: 9
T441AA19: RNCC: 5 | RNVC: 9

2 Jul 1992

5340-14-345-8330
Angle Bracket

143458330
205020: RNCC: 3 | RNVC: 2

5 Nov 1977

5340-14-266-2141
Angle Bracket

142662141
465158: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-550-4835
Mounting Bracket

145504835
RA1A702436169: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-272-9698
Angle Bracket

142729698
61627: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-476-8243
Angle Bracket

144768243
38019466: RNCC: 3 | RNVC: 2
38019466: RNCC: 5 | RNVC: 9

5 Jul 1995

5340-14-550-2306
Mounting Bracket

145502306
82140362000: RNCC: 3 | RNVC: 2

12 Jun 2006

5340-14-224-9062
Leaf Spring

142249062
0000286498: RNCC: 3 | RNVC: 2
0000286498: RNCC: 5 | RNVC: 9
286498: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-206-6704
Loop Clamp

142066704
0000363294: RNCC: 3 | RNVC: 2
0000363294: RNCC: 5 | RNVC: 9
363294: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-497-4064
Mounting Plate

144974064
1012210: RNCC: 3 | RNVC: 2
1012210: RNCC: 5 | RNVC: 2
F300 0T 023 1351: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-383-3634
Rod End Clevis

143833634
310101111: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-396-4089
Expansion Plug

143964089
N107722: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-464-1987
Anchor Strap

144641987
LYN007055011820: RNCC: 3 | RNVC: 2

22 Jul 1993

5340-14-379-4251
Access Cover

143794251
BAZ3910: RNCC: 3 | RNVC: 2

1 Oct 1982

5340-14-547-0030
Rod End Clevis

145470030
RA1M210153431N1: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-14-450-2099
Anchor Strap

144502099
5000920639: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-518-9987
Access Cover

145189987
700304: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-217-1996
Access Cover

142171996
3415645003: RNCC: 3 | RNVC: 2
3415645003: RNCC: 5 | RNVC: 2
0003011715: RNCC: 5 | RNVC: 2
EPDE8FL1Z: RNCC: 5 | RNVC: 9
0003011715: RNCC: 5 | RNVC: 9
3011715: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-250-3618
Retaining Strap

142503618
ST406M52P546: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-523-6749
Loop Clamp

145236749
J924989: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-545-2626
Mounting Bracket

145452626
S214A4012105: RNCC: 3 | RNVC: 2

30 Mar 2005

5340-14-529-2718
Clamping Catch

145292718
7020: RNCC: 3 | RNVC: 2

20 Mar 2002

5340-14-501-8908
Angle Bracket

145018908
38221650: RNCC: 3 | RNVC: 2
38221650: RNCC: 5 | RNVC: 9

19 Nov 1997

5340-14-231-1421
Angle Bracket

142311421
A64384: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-529-7497
Loop Clamp

145297497
COU002552052420: RNCC: 3 | RNVC: 2

9 Apr 2002

5340-14-464-7072
Bumper

144647072
7701350157: RNCC: 3 | RNVC: 2

25 Aug 1993

5340-14-513-3615
Mounting Plate

145133615
T5572951: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-14-343-1321
Bumper

143431321
1523340500: RNCC: 3 | RNVC: 2
0870276800: RNCC: 5 | RNVC: 2
0870276800: RNCC: 5 | RNVC: 9
KON1523340500: RNCC: 5 | RNVC: 9

16 Jun 1977

5340-14-484-8792
Lock Spindle

144848792
2681819: RNCC: 3 | RNVC: 2

12 Dec 1996

5340-14-420-3662
Retaining Strap

144203662
D4375: RNCC: 3 | RNVC: 2

7 Dec 1987

5340-14-469-7186
Mounting Bracket

144697186
330A64-1123-20: RNCC: 3 | RNVC: 2

4 May 1994

5340-14-367-2484
Rigid Caster

143672484
N508-8NEAB: RNCC: 3 | RNVC: 9
MPRN508-8NEAB: RNCC: 5 | RNVC: 9
N508-86AB: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-448-3903
Quick Release Pin

144483903
625C12L58: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-14-469-5775
Dashpot

144695775
22338353-5: RNCC: 3 | RNVC: 2

4 May 1994

5340-14-477-2467
Rod End Connector

144772467
RA1M210153410: RNCC: 3 | RNVC: 2

2 Aug 1995

5340-14-521-5268
Clamping Catch

145215268
70919.6: RNCC: 3 | RNVC: 2

9 Aug 2000

5340-14-552-5700
Mortise Lock

145525700
714908.00: RNCC: 3 | RNVC: 9

17 Jan 2007

5340-14-327-1335
Loop Clamp

143271335
16128177: RNCC: 3 | RNVC: 2
16128177: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-488-1509
Retaining Strap

144881509
0320100630: RNCC: 3 | RNVC: 2

18 Apr 1997

5340-14-530-5143
Mounting Plate

145305143
23310019-4: RNCC: 3 | RNVC: 2

18 Jun 2002

5340-14-259-7330
Handle Grip

142597330
18586: RNCC: 3 | RNVC: 9
18586: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-474-5687
Protection Bellows

144745687
27108107-6: RNCC: 3 | RNVC: 2

22 Feb 1995

5340-14-462-8839
Flush Catch Claw

144628839
033475B01TRA: RNCC: 3 | RNVC: 2
033475B: RNCC: 5 | RNVC: 2

5 May 1993

5340-14-465-2720
Bridge Clamp

144652720
365A08-4239-07: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-379-1168
Quick Release Pin

143791168
620C8T50: RNCC: 3 | RNVC: 2
620C08T50: RNCC: 5 | RNVC: 2

6 Sep 1982

5340-14-383-4695
Angle Bracket

143834695
16959619: RNCC: 3 | RNVC: 2
16959619: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-353-6813
Retaining Strap

143536813
650-403-246-0: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-483-4442
Expansion Plug

144834442
P106053H: RNCC: 3 | RNVC: 2

12 Sep 1996

5340-14-394-5472
Mounting Bracket

143945472
355A58-0517-2901: RNCC: 3 | RNVC: 2

28 Aug 1984

5340-14-539-8075
Mounting Bracket

145398075
8000219D01: RNCC: 3 | RNVC: 2

11 Feb 2004

5340-14-285-5535
Angle Bracket

142855535
711933: RNCC: 3 | RNVC: 9
062711933: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-478-8589
Mounting Bracket

144788589
009022222P: RNCC: 3 | RNVC: 2

27 Nov 1995

5340-14-388-7599
Handwheel

143887599
M4ZS490D3445A: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-348-8806
Access Cover

143488806
300-588-701-0: RNCC: 3 | RNVC: 2
300-588-701U: RNCC: 5 | RNVC: 2
000393010A: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-455-7476
Cover Strip

144557476
ZF05963235: RNCC: 3 | RNVC: 2
5963235: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-554-3295
Mounting Bracket

145543295
82092126001: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-362-5442
Pipe Hanger

143625442
223728: RNCC: 3 | RNVC: 2

19 Mar 1980

5340-14-540-8260
Access Cover

145408260
X1568294: RNCC: 3 | RNVC: 2

23 Apr 2004

5340-14-550-4892
Angle Bracket

145504892
RA1M704686871N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-554-2541
Mounting Bracket

145542541
82111597000: RNCC: 3 | RNVC: 2

15 Jun 2007

5340-14-554-6494
Mounting Bracket

145546494
82183719000: RNCC: 3 | RNVC: 2

31 Jul 2007

5340-14-553-8436
Mounting Plate

145538436
10617193: RNCC: 3 | RNVC: 2

23 May 2007

5340-14-512-7333
Plug Button

145127333
800033757: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-442-0848
Access Cover

144420848
1023391R00: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-14-475-4810
Access Cover

144754810
10374462: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-14-485-6440
Angle Bracket

144856440
46021118: RNCC: 3 | RNVC: 2
46021118: RNCC: 5 | RNVC: 2

6 Feb 1997

5340-14-523-0907
Access Cover

145230907
E24401AA: RNCC: 3 | RNVC: 2

20 Dec 2000

5340-14-550-7545
Access Cover

145507545
5010248947: RNCC: 3 | RNVC: 2

12 Jul 2006

5340-14-338-3600
Rod End Clevis

143383600
321C00259F6: RNCC: 3 | RNVC: 2
321C0259F6: RNCC: 5 | RNVC: 2

6 Nov 1976

5340-14-526-7722
Access Cover

145267722
4625394A: RNCC: 3 | RNVC: 2

5 Sep 2001

5340-14-501-0149
Access Cover

145010149
45575986: RNCC: 3 | RNVC: 2
F300 0T 025 0444: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-423-9859
Rod End Clevis

144239859
639100318: RNCC: 3 | RNVC: 2
89174105: RNCC: 5 | RNVC: 2
639100318: RNCC: 5 | RNVC: 9

5 May 1988

5340-14-534-9213
Rod End Clevis

145349213
4SH41522305: RNCC: 3 | RNVC: 2

16 Apr 2003

5340-14-340-9770
Access Hole Frame

143409770
193417: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-366-8385
Angle Bracket

143668385
A11A762030050: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-541-7314
Self-Locking Insert

145417314
003L476: RNCC: 3 | RNVC: 2

25 Jun 2004

5340-14-472-4526
Anchor Strap

144724526
DAV66985: RNCC: 3 | RNVC: 2

26 Oct 1994

5340-14-547-8346
Mounting Bracket

145478346
V001077: RNCC: 3 | RNVC: 2

17 Nov 2005

5340-14-541-3608
Detent Plunger

145413608
8011066B00: RNCC: 3 | RNVC: 2

3 Jun 2004

5340-14-547-4739
Mounting Bracket

145474739
S341A4002101: RNCC: 3 | RNVC: 2

14 Oct 2005

5340-14-402-0424
Retaining Strap

144020424
219843: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-353-1964
Bail Handle

143531964
0001: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-480-0084
Access Cover

144800084
462467CA: RNCC: 3 | RNVC: 2
462467CA: RNCC: 3 | RNVC: 9

21 Feb 1996

5340-14-555-9908
Mounting Bracket

145559908
10520824: RNCC: 3 | RNVC: 2

17 Jan 2008

5340-14-416-0445
Retaining Strap

144160445
BJM01520: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-334-6256
Angle Bracket

143346256
79062278: RNCC: 3 | RNVC: 2
79062278: RNCC: 5 | RNVC: 9

1 Jun 1976

5340-14-418-0568
Runner

144180568
050994G01TM79: RNCC: 3 | RNVC: 2
050994G: RNCC: 5 | RNVC: 2

6 Aug 1987

5340-14-513-8935
Bow Handle

145138935
336010: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-472-9699
Mounting Bracket

144729699
38511775: RNCC: 3 | RNVC: 2
38511775: RNCC: 5 | RNVC: 9

23 Nov 1994

5340-14-549-5418
Filler Opening Cap

145495418
353A126: RNCC: 3 | RNVC: 2

13 Apr 2006

5340-14-402-9123
Loop Clamp

144029123
U02636: RNCC: 3 | RNVC: 9

25 Jul 1985

5340-14-513-0604
Mounting Bracket

145130604
009572035P: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-14-375-8159
Angle Bracket

143758159
16296133: RNCC: 3 | RNVC: 2
16296133: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-425-2870
Mounting Plate

144252870
30330132Y: RNCC: 3 | RNVC: 2
30330132Y: RNCC: 5 | RNVC: 2

30 Jun 1988

5340-14-435-9396
Mounting Bracket

144359396
20110455: RNCC: 3 | RNVC: 2
20110455: RNCC: 5 | RNVC: 9

29 Nov 1989

5340-14-511-7509
Rigid Caster

145117509
105159L: RNCC: 3 | RNVC: 2

15 Jan 1999

5340-14-547-8843
Snap Hook

145478843
SA2657: RNCC: 3 | RNVC: 2

22 Nov 2005

5340-14-316-2183
Bumper

143162183
673A111C: RNCC: 3 | RNVC: 2
673A111C: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-320-3065
Angle Bracket

143203065
0064770850: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-549-0956
Angle Bracket

145490956
RA1M704844771N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-471-6712
Webbing Strap

144716712
C102936500: RNCC: 3 | RNVC: 2
5010099792: RNCC: 5 | RNVC: 2

7 Sep 1994

5340-14-403-6322
Pipe Hanger

144036322
0301020240: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-421-7654
Angle Bracket

144217654
20139344: RNCC: 3 | RNVC: 2

27 Jan 1988

5340-14-396-3712
Mending Plate

143963712
477075K: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-406-1454
Bumper

144061454
H103020: RNCC: 3 | RNVC: 2
H103020: RNCC: 6 | RNVC: 9

8 Jan 1986

5340-14-543-7440
Loop Clamp

145437440
709233017: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-14-546-3783
Bumper

145463783
5000138609: RNCC: 3 | RNVC: 2

28 Jun 2005

5340-14-508-0863
Mounting Plate

145080863
890606510: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-478-8263
Angle Bracket

144788263
29417591: RNCC: 3 | RNVC: 2

22 Nov 1995

5340-14-423-0365
Angle Bracket

144230365
4772122120: RNCC: 3 | RNVC: 2

31 Mar 1988

5340-14-277-0728
Retaining Strap

142770728
C248236: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-529-8907
Mounting Bracket

145298907
10609616: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-385-8845
Control Rod

143858845
56393: RNCC: 3 | RNVC: 9

24 Aug 1983

5340-14-425-1403
Bumper

144251403
2647-49: RNCC: 3 | RNVC: 2
0228928W00: RNCC: 5 | RNVC: 2

22 Jun 1988

5340-14-250-4450
Retaining Strap

142504450
153551: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-425-8163
Webbing Strap

144258163
9023CPV10235A: RNCC: 3 | RNVC: 2

21 Jul 1988

5340-14-479-9159
Mounting Bracket

144799159
646372: RNCC: 3 | RNVC: 2

14 Feb 1996

5340-14-332-9791
Webbing Strap

143329791
192072: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-469-5898
Retaining Strap

144695898
160R742059: RNCC: 3 | RNVC: 2

4 May 1994

5340-14-466-5459
Mounting Bracket

144665459
45215714: RNCC: 3 | RNVC: 2

15 Nov 1993

5340-14-549-0893
Angle Bracket

145490893
RA1M701207131N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-509-6661
Bow Handle

145096661
RA1M216900401: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-375-8213
Retaining Strap

143758213
16558994: RNCC: 3 | RNVC: 2
16558994: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-487-5326
Synchro Clamp

144875326
RA1M287111815: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-366-4968
Vent Plug

143664968
E16100: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-533-7554
Lock Bolt

145337554
93.307: RNCC: 3 | RNVC: 2

21 Feb 2003

5340-14-536-0839
Mounting Bracket

145360839
803228130111: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-529-3993
Mounting Plate

145293993
3800.035: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-536-0851
Mounting Bracket

145360851
803228040112: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-305-4057
Loop Clamp

143054057
205300650: RNCC: 3 | RNVC: 2
20S6-5: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-284-6599
Angle Bracket

142846599
9132931: RNCC: 3 | RNVC: 2
9132931: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-432-6031
Mounting Plate

144326031
20107273: RNCC: 3 | RNVC: 9

14 Jun 1989

5340-14-551-3540
Angle Bracket

145513540
RA1A703916141N1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-433-9403
Threaded Rod End

144339403
1000004: RNCC: 3 | RNVC: 2
0200978T00: RNCC: 5 | RNVC: 2

23 Aug 1989

5340-14-444-5014
Pipe Hanger

144445014
ST406M79P150: RNCC: 3 | RNVC: 2

14 Jan 1991

5340-14-437-6580
Retaining Strap

144376580
PM1A165130410: RNCC: 3 | RNVC: 2
PM1A165130410: RNCC: 5 | RNVC: 2

7 Feb 1990

5340-14-428-1980
Mounting Plate

144281980
81421763: RNCC: 3 | RNVC: 2

3 Dec 1988

5340-14-413-9634
Retaining Strap

144139634
ST400S60P158: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-511-0790
Loop Holder

145110790
2150036: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-14-542-3001
Mounting Bracket

145423001
971579108: RNCC: 3 | RNVC: 2
971579108: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-555-1311
Mounting Plate

145551311
82190031000: RNCC: 3 | RNVC: 2

3 Oct 2007

5340-14-543-1606
Angle Bracket

145431606
S242A1012200: RNCC: 3 | RNVC: 2

26 Aug 2004

5340-14-500-5843
Mounting Plate

145005843
7903069035: RNCC: 3 | RNVC: 2
F300 0T 024 6027: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-535-2337
Retaining Strap

145352337
RA1M701326310A2: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-523-0255
Shelf Bracket

145230255
47139313: RNCC: 3 | RNVC: 2

18 Dec 2000

5340-14-383-3684
Bumper

143833684
36775: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-342-1256
Bumper

143421256
702986: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-258-8334
Loop Clamp

142588334
9137972: RNCC: 3 | RNVC: 2
9137972: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-439-3657
Pipe Hanger

144393657
DA2C707111420: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-476-8250
Butt Hinge

144768250
45463782: RNCC: 3 | RNVC: 2

5 Jul 1995

5340-14-466-6995
Angle Bracket

144666995
820852B67: RNCC: 3 | RNVC: 2

24 Nov 1993

5340-14-318-9497
Synchro Clamp

143189497
0235227930: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-371-1378
Retaining Strap

143711378
A11A602221001A1: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-263-9549
Access Cover

142639549
330A21-2040-28: RNCC: 3 | RNVC: 2
330A21-2040-2800: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-235-7731
Rod End Clevis

142357731
NO PRIMARY REF14-235-7731: RNCC: 3 | RNVC: 2
2J4200: RNCC: 5 | RNVC: 2
2J4200: RNCC: 5 | RNVC: 9
2J4200: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-489-3548
Access Cover

144893548
20229121-05: RNCC: 3 | RNVC: 2
20229121-05: RNCC: 5 | RNVC: 9
1270AA2016242: RNCC: 6 | RNVC: 9

9 Jul 1997

5340-14-300-9581
Rod End Connector

143009581
341A91-5406-33: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-411-2669
Loop Clamp

144112669
ASNA0021-25SE10: RNCC: 3 | RNVC: 2
A0021-25SE10: RNCC: 5 | RNVC: 2

6 Aug 1986

5340-14-532-0683
Mounting Bracket

145320683
03-725-330: RNCC: 3 | RNVC: 2
SZ03.725.330: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-483-3767
Angle Bracket

144833767
AEAV000101-2120: RNCC: 3 | RNVC: 2

6 Sep 1996

5340-14-383-6057
Rod End Clevis

143836057
TB30-41019-100: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-454-4850
Flush Lock

144544850
21-41200: RNCC: 3 | RNVC: 2
072940001000011: RNCC: 5 | RNVC: 2
061159780: RNCC: 5 | RNVC: 9

2 Apr 1992

5340-14-520-8840
Blank Panel

145208840
CAPOT01844B00: RNCC: 3 | RNVC: 2

21 Jun 2000

5340-14-450-4372
Runner

144504372
1557562: RNCC: 3 | RNVC: 2
1557562: RNCC: 5 | RNVC: 2

9 Oct 1991

5340-14-550-9159
Angle Bracket

145509159
RA1B701752161N1: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-382-9116
Runner

143829116
147984: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-413-1714
Angle Bracket

144131714
121323: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-14-550-8013
Butt Hinge

145508013
Y00005345: RNCC: 3 | RNVC: 2

18 Jul 2006

5340-14-383-4112
Retaining Strap

143834112
391627: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-374-6100
Loop Clamp

143746100
0035648042: RNCC: 3 | RNVC: 2
0035648042: RNCC: 5 | RNVC: 9
35648042: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-525-1957
Bridge Clamp

145251957
06310P122408: RNCC: 3 | RNVC: 2
2420582000: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-486-2456
Butt Hinge

144862456
CC4231B: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-524-9133
Loop Clamp

145249133
1218-9843: RNCC: 3 | RNVC: 2

3 May 2001

5340-14-527-6158
Pipe Hanger

145276158
COU001552051001: RNCC: 3 | RNVC: 2

5 Nov 2001

5340-14-382-5014
Loop Clamp

143825014
045S03-576139C: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-391-6216
Retaining Strap

143916216
20190024: RNCC: 3 | RNVC: 2
20190024: RNCC: 5 | RNVC: 9

21 Mar 1984

5340-14-444-2333
Cover Strip

144442333
PM1A212505006: RNCC: 3 | RNVC: 2
PM1A212505006: RNCC: 5 | RNVC: 2

18 Dec 1990

5340-14-306-2313
Retaining Strap

143062313
714979: RNCC: 3 | RNVC: 2
5171497900: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-377-3830
Loop Clamp

143773830
47930: RNCC: 3 | RNVC: 2

17 May 1982

5340-14-303-6810
Butt Hinge

143036810
16246037: RNCC: 3 | RNVC: 2
16246037: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-526-1945
Retaining Clip

145261945
80-301127: RNCC: 3 | RNVC: 2

9 Jul 2001

5340-14-285-2188
Quick Release Pin

142852188
A10-90-141-52-0: RNCC: 3 | RNVC: 2
A10-90-141-52-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-285-8536
Anchor Strap

142858536
NO PRIMARY REF14-285-8536: RNCC: 3 | RNVC: 2
6224-4: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-369-2919
Access Cover

143692919
300-585-303-0: RNCC: 3 | RNVC: 2
000359030A: RNCC: 5 | RNVC: 2

17 Apr 1981

5340-14-486-1848
Angle Bracket

144861848
PA01PD040008: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-466-1787
Loop Clamp

144661787
166072: RNCC: 3 | RNVC: 2
89170174: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-516-8464
Mounting Bracket

145168464
101160101261: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-14-541-5110
Mounting Bracket

145415110
1091239: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-528-2735
Bridge Clamp

145282735
RUZ200: RNCC: 3 | RNVC: 2

16 Jan 2002

5340-14-425-9969
Rod End Clevis

144259969
160H712888-20: RNCC: 3 | RNVC: 2

28 Jul 1988

5340-14-505-2906
Split Tubular Clip

145052906
8PFACI08: RNCC: 3 | RNVC: 2
8PFACI08: RNCC: 5 | RNVC: 2

18 Mar 1998

5340-14-335-3572
Anchor Strap

143353572
196404: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-549-3584
Door Handle

145493584
51333: RNCC: 3 | RNVC: 2

27 Mar 2006

5340-14-515-9225
Mounting Bracket

145159225
21-9177 R6: RNCC: 3 | RNVC: 9

26 Aug 1999

5340-14-382-8493
Butt Hinge

143828493
5543ABC: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-232-9089
Mounting Bracket

142329089
0249850770: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-465-7680
Loop Clamp

144657680
61313105044: RNCC: 3 | RNVC: 2
81G44: RNCC: 5 | RNVC: 2
813104400: RNCC: 5 | RNVC: 2
Z00.N7141290044: RNCC: 5 | RNVC: 2

14 Oct 1993

5340-14-541-5471
Synchro Clamp

145415471
31104612: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-555-5149
Lock Bolt

145555149
13020701: RNCC: 3 | RNVC: 2

22 Nov 2007

5340-14-476-9643
Bumper

144769643
RA1M294324015N1: RNCC: 3 | RNVC: 2

12 Jul 1995

5340-14-394-9568
Shelf Bracket

143949568
20735709: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-335-3563
Access Cover

143353563
196926: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-031-1718
Mending Plate

140311718
VDP4950: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-400-0233
Access Cover

144000233
609234: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-436-9135
Access Cover

144369135
0762358C00: RNCC: 3 | RNVC: 2

9 Jan 1990

5340-14-469-7781
Access Cover

144697781
303422: RNCC: 3 | RNVC: 2

10 May 1994

5340-14-414-5427
Rod End Clevis

144145427
TH20J1501: RNCC: 3 | RNVC: 2

11 Feb 1987

5340-14-408-6426
Rod End Clevis

144086426
160G202091: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-479-8516
Access Cover

144798516
T1083AA50: RNCC: 3 | RNVC: 2
T1083AA52: RNCC: 5 | RNVC: 2
629064: RNCC: 5 | RNVC: 9
T1083AA52A: RNCC: 5 | RNVC: 9

7 Feb 1996

5340-14-396-2994
Rod End Clevis

143962994
4771620150: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-529-9143
Utility Access Door

145299143
RLSAXP120A: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-459-7862
Rod End Clevis

144597862
160G722017-19: RNCC: 3 | RNVC: 2

17 Dec 1992

5340-14-352-7692
Access Cover

143527692
230249: RNCC: 3 | RNVC: 2
230249: RNCC: 5 | RNVC: 2

14 Nov 1978

5340-14-321-0104
Access Cover

143210104
15446452: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-367-4379
Anchor Strap

143674379
15804209: RNCC: 3 | RNVC: 2
15804209: RNCC: 5 | RNVC: 2
15804209: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-483-2744
Access Cover

144832744
4MC800704: RNCC: 3 | RNVC: 2
91497036: RNCC: 5 | RNVC: 2
4MC801556: RNCC: 5 | RNVC: 2
4MC800704: RNCC: 5 | RNVC: 9
6115AA2071357: RNCC: 6 | RNVC: 9

29 Aug 1996

5340-14-551-2896
Angle Bracket

145512896
RA1M701976261: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-550-4797
Angle Bracket

145504797
RA1A703156571: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-518-2334
Mounting Plate

145182334
421960W: RNCC: 3 | RNVC: 2
5010146693: RNCC: 5 | RNVC: 2

28 Jan 2000

5340-14-436-2198
Mounting Bracket

144362198
DA2C230182921: RNCC: 3 | RNVC: 2

6 Dec 1989

5340-14-507-2452
Mounting Bracket

145072452
10379870: RNCC: 3 | RNVC: 2

24 Jun 1998

5340-14-449-9521
Mounting Bracket

144499521
205400: RNCC: 3 | RNVC: 2

18 Sep 1991

5340-14-554-1956
Mounting Plate

145541956
356 069: RNCC: 3 | RNVC: 2
356 069: RNCC: 3 | RNVC: 2

13 Jun 2007

5340-14-418-5111
Runner

144185111
15452309: RNCC: 3 | RNVC: 2
15452309: RNCC: 5 | RNVC: 9

26 Aug 1987

5340-14-511-6295
Loop Clamp

145116295
78647B020: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-460-8297
Mounting Bracket

144608297
016303: RNCC: 3 | RNVC: 2

10 Feb 1993

5340-14-547-5340
Retaining Strap

145475340
RA1M703749211: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-447-3430
Mounting Bracket

144473430
20787423: RNCC: 3 | RNVC: 2
20787423: RNCC: 5 | RNVC: 9

15 May 1991

5340-14-418-1133
Angle Bracket

144181133
BJM00282: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-460-9968
Angle Bracket

144609968
5000995249: RNCC: 3 | RNVC: 2

17 Feb 1993

5340-14-467-2058
Mounting Bracket

144672058
GC10276: RNCC: 3 | RNVC: 2

21 Dec 1993

5340-14-359-0755
Pipe Hanger

143590755
A11A221172280: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-447-2945
Shelf Bracket

144472945
5002326: RNCC: 3 | RNVC: 2

15 May 1991

5340-14-429-1635
Retaining Strap

144291635
534247: RNCC: 3 | RNVC: 2

11 Jan 1989

5340-14-447-6093
Retaining Strap

144476093
HB161G26: RNCC: 3 | RNVC: 2

29 May 1991

5340-14-339-3131
Bow Handle

143393131
002359222P: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-548-6131
Mounting Bracket

145486131
RA1A704886311N1: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-357-4730
Pipe Hanger

143574730
A11A522320230: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-518-4604
Mounting Bracket

145184604
T711A1001126: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-382-9435
Retaining Strap

143829435
33119: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-482-0920
Runner

144820920
22098383: RNCC: 3 | RNVC: 2
22098383: RNCC: 5 | RNVC: 9

20 Jun 1996

5340-14-426-4675
Cover Strip

144264675
CJ195X515X80X1,5AG3: RNCC: 3 | RNVC: 2

1 Sep 1988

5340-14-442-5666
Mounting Bracket

144425666
007776080M: RNCC: 3 | RNVC: 2

22 Oct 1990

5340-14-349-2318
Hasp Staple

143492318
222959: RNCC: 3 | RNVC: 2
222959: RNCC: 5 | RNVC: 9

22 May 1978

5340-14-226-5159
Angle Bracket

142265159
0000457429: RNCC: 3 | RNVC: 2
457429: RNCC: 5 | RNVC: 9
0000457429: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-554-2534
Cover Strip

145542534
82106655000: RNCC: 3 | RNVC: 2

15 Jun 2007

5340-14-298-2790
Angle Bracket

142982790
0158789: RNCC: 3 | RNVC: 2
L281711: RNCC: 5 | RNVC: 2
22281711: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-518-5123
Mounting Plate

145185123
HRAXX000261: RNCC: 3 | RNVC: 9

9 Feb 2000

5340-14-455-5962
Mounting Plate

144555962
16509879: RNCC: 3 | RNVC: 2

28 May 1992

5340-14-503-9882
Mounting Plate

145039882
MAINT93901A00: RNCC: 3 | RNVC: 2
MAINT93901X00: RNCC: 5 | RNVC: 9

4 Feb 1998

5340-14-509-6540
Cover Strip

145096540
RA1M126090031N1: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-470-0542
Loop Clamp

144700542
SM625PARDPAS316TI: RNCC: 3 | RNVC: 2

26 May 1994

5340-14-467-1185
Retaining Strap

144671185
161433: RNCC: 3 | RNVC: 2
89169800: RNCC: 5 | RNVC: 2

16 Dec 1993

5340-14-476-4987
Butt Hinge

144764987
45212256: RNCC: 3 | RNVC: 2
45212256: RNCC: 3 | RNVC: 9

14 Jun 1995

5340-14-376-1741
Angle Bracket

143761741
15168017: RNCC: 3 | RNVC: 2

30 Mar 1982

5340-14-373-5886
Mending Plate

143735886
1253978: RNCC: 3 | RNVC: 2
FOE1253978: RNCC: 5 | RNVC: 9

13 Nov 1981

5340-14-482-6743
Stand Base

144826743
45610840: RNCC: 3 | RNVC: 2

18 Jul 1996

5340-14-447-0403
Retaining Strap

144470403
16744116: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-14-504-3075
Mounting Bracket

145043075
3701380M91: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-357-1902
Angle Bracket

143571902
A11A234260011: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-403-3769
Webbing Strap

144033769
006040050P: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-517-6794
Retaining Strap

145176794
DE1E794200008: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-545-7457
Swivel Caster

145457457
4HC112: RNCC: 3 | RNVC: 2
61558421: RNCC: 5 | RNVC: 2
AA016365: RNCC: 6 | RNVC: 9

9 May 2005

5340-14-483-8033
Mounting Bracket

144838033
8000731C00: RNCC: 3 | RNVC: 2

3 Oct 1996

5340-14-522-0474
Mounting Bracket

145220474
MB4020F00: RNCC: 3 | RNVC: 2

2 Oct 2000

5340-14-455-7811
Shelf Bracket

144557811
70899J100521: RNCC: 3 | RNVC: 2
100521: RNCC: 5 | RNVC: 2
5044840: RNCC: 5 | RNVC: 9

11 Jun 1992

5340-14-202-5956
Retaining Strap

142025956
0000088520: RNCC: 3 | RNVC: 2
0000088520: RNCC: 5 | RNVC: 9
88520: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-14-551-3455
Angle Bracket

145513455
RA1M701666212: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-532-1655
Loop Clamp

145321655
5005005036: RNCC: 3 | RNVC: 2

16 Oct 2002

5340-14-551-1935
Protection Bellows

145511935
A76524: RNCC: 3 | RNVC: 2

5 Sep 2006

5340-14-310-6889
Angle Bracket

143106889
001145031P: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-421-0096
Runner

144210096
39233544: RNCC: 3 | RNVC: 2
39233544: RNCC: 5 | RNVC: 9

6 Jan 1988

5340-14-472-9932
Access Cover

144729932
27108302-5: RNCC: 3 | RNVC: 2

23 Nov 1994

5340-14-489-1563
Mounting Plate

144891563
23281444-7: RNCC: 3 | RNVC: 2

30 Jun 1997

5340-14-496-2315
Mounting Bracket

144962315
75091-9: RNCC: 3 | RNVC: 2
F300 0T 021 0494: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-419-7202
Mounting Plate

144197202
004883: RNCC: 3 | RNVC: 2
004860-6: RNCC: 5 | RNVC: 2
4883: RNCC: 5 | RNVC: 2

5 Nov 1987

5340-14-466-1683
Loop Clamp

144661683
166080: RNCC: 3 | RNVC: 2
89170182: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-321-8905
Rod End Connector

143218905
16318392: RNCC: 3 | RNVC: 2
16318392: RNCC: 3 | RNVC: 9

1 Jan 1975

5340-14-550-9578
Butt Hinge

145509578
85.7.1208: RNCC: 3 | RNVC: 2

2 Aug 2006

5340-14-452-1837
Mounting Plate

144521837
80-4801-012: RNCC: 3 | RNVC: 2

23 Dec 1991

5340-14-390-5658
Quick Release Pin

143905658
NO PRIMARY REF14-390-5658: RNCC: 3 | RNVC: 2
BIR01CE06-040: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-14-362-0129
Runner

143620129
23079258-6: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-493-6820
Bumper

144936820
343 644 IND.3: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-523-0678
Loop Clamp

145230678
2 012 205: RNCC: 3 | RNVC: 2

20 Dec 2000

5340-14-454-0902
Push Door Plate

144540902
0185105400: RNCC: 3 | RNVC: 2
89416422: RNCC: 5 | RNVC: 2

19 Mar 1992

5340-14-481-7519
Bail Handle

144817519
79102386: RNCC: 3 | RNVC: 2
79102386: RNCC: 5 | RNVC: 9

30 May 1996

5340-14-542-1076
Mounting Bracket

145421076
F00184428: RNCC: 3 | RNVC: 2

3 Jul 2004

5340-14-379-0191
Mounting Plate

143790191
2206-911A517: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-532-9691
Runner

145329691
6401BDR100013: RNCC: 3 | RNVC: 2

14 Jan 2003

5340-14-505-1292
Loop Clamp

145051292
161210: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-366-2890
Angle Bracket

143662890
A11A221260411: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-14-519-7451
Access Cover

145197451
1106613T00: RNCC: 3 | RNVC: 2

5 Apr 2000

5340-14-313-7042
Access Cover

143137042
0064767120: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-462-6307
Mounting Plate

144626307
MA1099F00: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-14-445-4010
Anchor Strap

144454010
BLC239082: RNCC: 3 | RNVC: 2

13 Feb 1991

5340-14-513-0580
Webbing Strap

145130580
009594035P: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-14-463-1033
Mounting Bracket

144631033
LN214001IC04: RNCC: 3 | RNVC: 2

26 May 1993

5340-14-368-1327
Detent Plunger

143681327
676: RNCC: 3 | RNVC: 9
9560131170: RNCC: 5 | RNVC: 2

19 Jan 1981

5340-14-383-0676
Detent Plunger

143830676
18159: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-484-1825
Retaining Strap

144841825
5010146231: RNCC: 3 | RNVC: 2
5000293292: RNCC: 5 | RNVC: 2

31 Oct 1996

5340-14-430-1173
Access Cover

144301173
C2PT4396A30000: RNCC: 3 | RNVC: 2
C2PT4396A30000: RNCC: 5 | RNVC: 2

1 Mar 1989

5340-14-473-9464
Access Cover

144739464
39252307: RNCC: 3 | RNVC: 2
39252307: RNCC: 3 | RNVC: 9

18 Jan 1995

5340-14-524-3500
Plug Button

145243500
SD001PD010195: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-14-411-4114
Cover Strip

144114114
MY2055217519G01: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-541-8412
Mounting Plate

145418412
F1261130: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-481-3582
Mounting Bracket

144813582
10060191: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-554-4447
Mounting Bracket

145544447
S712V3001124: RNCC: 3 | RNVC: 2

9 Jul 2007

5340-14-385-3917
Access Cover

143853917
0308107610: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-441-1122
Retaining Strap

144411122
20297957: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-375-8942
Loop Clamp

143758942
5000000881: RNCC: 3 | RNVC: 2
5000000881: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-463-5599
Access Cover

144635599
0185101060: RNCC: 3 | RNVC: 2
89414672: RNCC: 5 | RNVC: 2

17 Jun 1993

5340-14-348-6770
Retaining Strap

143486770
422780: RNCC: 3 | RNVC: 2
422780: RNCC: 5 | RNVC: 9

19 Apr 1978

5340-14-506-6816
Dashpot Piston

145066816
FAA320A1: RNCC: 3 | RNVC: 2

6 May 1998

5340-14-536-6812
Access Cover

145366812
47086302: RNCC: 3 | RNVC: 2

10 Sep 2003

5340-14-511-0833
Rim Lock

145110833
600070: RNCC: 3 | RNVC: 9

2 Dec 1998

5340-14-448-2406
Retaining Strap

144482406
5000134567: RNCC: 3 | RNVC: 2

18 Jun 1991

5340-14-422-5769
Retaining Band

144225769
45275: RNCC: 3 | RNVC: 2

10 Mar 1988

5340-14-450-1071
Strap Hinge

144501071
757050: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-432-2582
Mounting Bracket

144322582
A0H500R5: RNCC: 3 | RNVC: 2

31 May 1989

5340-14-480-9469
Mounting Bracket

144809469
5010114066: RNCC: 3 | RNVC: 2

11 Apr 1996

5340-14-521-9387
Mounting Plate

145219387
1100862C02: RNCC: 3 | RNVC: 2

27 Sep 2000

5340-14-284-6801
Bumper

142846801
90438: RNCC: 3 | RNVC: 2
90438: RNCC: 5 | RNVC: 2
90438: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-462-7364
Synchro Clamp

144627364
PM1A728110005: RNCC: 3 | RNVC: 2
PM1A728110005: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-14-525-4922
Mounting Plate

145254922
8013847L00: RNCC: 3 | RNVC: 2

6 Jun 2001

5340-14-382-5848
Angle Bracket

143825848
20189801: RNCC: 3 | RNVC: 2
20189801: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-542-4065
Mounting Bracket

145424065
PCE210: RNCC: 3 | RNVC: 2

9 Jul 2004

5340-14-489-6095
Mounting Bracket

144896095
0301047920: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-534-2533
Loop Clamp

145342533
8035221K00: RNCC: 3 | RNVC: 2

19 Mar 2003

5340-14-280-0399
Loop Clamp

142800399
79221-976: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-401-5448
Retaining Strap

144015448
217921: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-381-7963
Retaining Strap

143817963
20204217: RNCC: 3 | RNVC: 2
20204217: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-555-4171
Loop Clamp

145554171
78651RH9CG: RNCC: 1 | RNVC: 2
78651RH9CG: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-14-509-6531
Cover Strip

145096531
RA1M126090011: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-555-8652
Mounting Plate

145558652
82181521000: RNCC: 3 | RNVC: 2

19 Dec 2007

5340-14-541-3269
Padlock

145413269
02052203: RNCC: 3 | RNVC: 2
CITY45 MARINE: RNCC: 5 | RNVC: 2

27 May 2004

5340-14-549-8108
Mounting Bracket

145498108
961850119: RNCC: 3 | RNVC: 2

15 May 2006

5340-14-330-3600
Bow Handle

143303600
120: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-381-4720
Angle Bracket

143814720
573906492: RNCC: 3 | RNVC: 2
573906492: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-401-3085
Angle Bracket

144013085
218757: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-475-0332
Mounting Bracket

144750332
059328D01TRA: RNCC: 3 | RNVC: 2
059328D: RNCC: 5 | RNVC: 2

16 Mar 1995

5340-14-512-1977
Mounting Plate

145121977
96 ALCR 110: RNCC: 3 | RNVC: 2

8 Feb 1999

5340-14-361-1004
Strap Hinge

143611004
2744389: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-555-4106
Loop Clamp

145554106
78651RH24: RNCC: 1 | RNVC: 2
78651RH24: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-14-540-7052
Mounting Bracket

145407052
38010825: RNCC: 3 | RNVC: 2
5330 316463 11: RNCC: 5 | RNVC: 2
4848ZG8613180952: RNCC: 6 | RNVC: 9

21 Apr 2004

5340-14-449-1106
Angle Bracket

144491106
717159: RNCC: 3 | RNVC: 2

29 Jul 1991

5340-14-367-4155
Bow Handle

143674155
15167631: RNCC: 3 | RNVC: 2
15167631: RNCC: 5 | RNVC: 2
15167631: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-440-6354
Synchro Clamp

144406354
0855875B01: RNCC: 3 | RNVC: 2

18 Jul 1990

5340-14-477-2135
Block Clamp

144772135
RA1M210108380: RNCC: 3 | RNVC: 2

2 Aug 1995

5340-14-551-2658
Retaining Strap

145512658
R47595: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-529-9383
Mounting Plate

145299383
461823/80: RNCC: 3 | RNVC: 2

23 Apr 2002

5340-14-541-5177
Rope Cleat

145415177
1091473: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-543-6285
Mounting Plate

145436285
AMPC GENE E223417: RNCC: 3 | RNVC: 2

26 Nov 2004

5340-14-483-0852
Door Holder

144830852
204114: RNCC: 3 | RNVC: 2

8 Aug 1996

5340-14-553-9435
Shelf Bracket

145539435
S532A4041144: RNCC: 3 | RNVC: 2

1 Jun 2007

5340-14-458-0034
Webbing Strap

144580034
396633: RNCC: 3 | RNVC: 2
396633: RNCC: 5 | RNVC: 9

2 Oct 1992

5340-14-516-1554
Loop Clamp

145161554
222709: RNCC: 3 | RNVC: 2

14 Sep 1999

5340-14-529-4418
Detent Plunger

145294418
6401BDR280: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-375-3443
Retaining Strap

143753443
045A20-626203B: RNCC: 3 | RNVC: 2

26 Feb 1982

Load More Results