What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 114 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 114 of 446

5340-14-534-1074
Mounting Bracket

145341074
332A67-2637-20: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-431-1172
Loop Clamp

144311172
NO PRIMARY REF14-431-1172: RNCC: 3 | RNVC: 2
53291: RNCC: 5 | RNVC: 9

5 Apr 1989

5340-14-333-5114
Bow Handle

143335114
SR2-00-02-37: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-409-4493
Access Cover

144094493
20164674: RNCC: 3 | RNVC: 2
0177730220: RNCC: 5 | RNVC: 2

28 May 1986

5340-14-545-3968
Detent Plunger

145453968
1SH41816142: RNCC: 3 | RNVC: 2

11 Apr 2005

5340-14-426-8046
Access Cover

144268046
DLT100967: RNCC: 3 | RNVC: 2

22 Sep 1988

5340-14-349-3728
Access Cover

143493728
22053363: RNCC: 3 | RNVC: 2
22354095: RNCC: 5 | RNVC: 2

22 May 1978

5340-14-545-6844
Angle Bracket

145456844
RA1A703750151N1: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-456-8927
Access Cover

144568927
1029732L01: RNCC: 3 | RNVC: 2

29 Jul 1992

5340-14-454-8767
Webbing Strap

144548767
5000438418: RNCC: 3 | RNVC: 2

24 Apr 1992

5340-14-400-0885
Access Cover

144000885
213958: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-413-1309
Anchor Strap

144131309
144169: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-14-324-6175
Mending Plate

143246175
438509: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-315-1699
Flush Catch Claw

143151699
0236990630: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-363-9245
Mending Plate

143639245
573902410: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-390-8434
Loop Clamp

143908434
H13P: RNCC: 3 | RNVC: 2
0146348N00: RNCC: 5 | RNVC: 2
91266114: RNCC: 5 | RNVC: 2

1 Mar 1984

5340-14-465-4827
Mounting Bracket

144654827
365A21-5047-74: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-496-0731
Rod Retainer Clip

144960731
30124208: RNCC: 3 | RNVC: 2
F300 0T 020 8433: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-357-3003
Clamping Catch

143573003
91590: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-539-7598
Access Cover

145397598
SZ09.704.743: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-14-520-0724
Access Cover

145200724
47137797: RNCC: 3 | RNVC: 2

10 May 2000

5340-14-425-5419
Access Cover

144255419
30335689G: RNCC: 3 | RNVC: 2

7 Jul 1988

5340-14-501-8903
Mounting Bracket

145018903
38659746: RNCC: 3 | RNVC: 2
38659746: RNCC: 5 | RNVC: 9

19 Nov 1997

5340-14-453-5920
Rod End Connector

144535920
182723M1: RNCC: 3 | RNVC: 2
182723M1: RNCC: 5 | RNVC: 9

26 Feb 1992

5340-14-541-1516
Access Cover

145411516
210205-3: RNCC: 3 | RNVC: 2

14 May 2004

5340-14-459-1493
Loop Clamp

144591493
20322858: RNCC: 3 | RNVC: 2
20322858: RNCC: 5 | RNVC: 9

19 Nov 1992

5340-14-285-9649
Webbing Strap

142859649
15142240: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-425-6056
Runner

144256056
16887586: RNCC: 3 | RNVC: 2
16887586: RNCC: 3 | RNVC: 9

12 Jul 1988

5340-14-503-8934
Rim Lock Set

145038934
PZ1808ACA02: RNCC: 3 | RNVC: 2
F0024630: RNCC: 5 | RNVC: 9

4 Feb 1998

5340-14-265-4654
Pipe Hanger

142654654
112: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-256-7214
Locking Stay

142567214
62179525: RNCC: 3 | RNVC: 9
062179525: RNCC: 5 | RNVC: 9
179525: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-354-8468
Retaining Strap

143548468
150743: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-436-9730
Angle Bracket

144369730
39401757: RNCC: 3 | RNVC: 2

10 Jan 1990

5340-14-459-1431
Mounting Bracket

144591431
T424AA19: RNCC: 3 | RNVC: 2
5046494: RNCC: 5 | RNVC: 9
T424AA19: RNCC: 5 | RNVC: 9

19 Nov 1992

5340-14-496-9714
Expansion Plug

144969714
E29584A200AGTCQ: RNCC: 2 | RNVC: 2
F300 0T 022 3432: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-330-3758
Webbing Strap

143303758
317-420: RNCC: 3 | RNVC: 9
317-420: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-502-6160
Protection Bellows

145026160
5010244030: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-257-7548
Retaining Strap

142577548
C955A5: RNCC: 3 | RNVC: 2
C955A5: RNCC: 5 | RNVC: 2
91219990: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-494-3496
Mounting Plate

144943496
5000497125: RNCC: 3 | RNVC: 2
F300 0T 017 0530: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-523-5344
Loop Clamp

145235344
05100008: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-14-383-2965
Loop Clamp

143832965
18549: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-444-6515
Butt Hinge

144446515
91PD130106: RNCC: 3 | RNVC: 2
91PD130106: RNCC: 5 | RNVC: 9

16 Jan 1991

5340-14-487-5541
Angle Bracket

144875541
78721DH29B1: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-362-2555
Angle Bracket

143622555
A11A231474060A2: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-373-5844
Loop Clamp

143735844
0000150842: RNCC: 3 | RNVC: 2
0000150842: RNCC: 5 | RNVC: 9

13 Nov 1981

5340-14-484-9022
Retaining Strap

144849022
189307-228: RNCC: 3 | RNVC: 9

12 Dec 1996

5340-14-550-9225
Angle Bracket

145509225
RA1B794200361N1: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-259-6770
Mending Plate

142596770
43258: RNCC: 3 | RNVC: 2
10-741507: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-543-3233
Mounting Bracket

145433233
10623143: RNCC: 3 | RNVC: 2

20 Oct 2004

5340-14-228-9638
Access Cover

142289638
474P403: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-474-0960
Eye Hook

144740960
31503479: RNCC: 3 | RNVC: 9

25 Jan 1995

5340-14-526-2097
Mounting Bracket

145262097
303 893: RNCC: 3 | RNVC: 2

11 Jul 2001

5340-14-381-3943
Angle Bracket

143813943
NO PRIMARY REF14-381-3943: RNCC: 3 | RNVC: 2
404112898: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-514-0462
Angle Bracket

145140462
RA1M112111131: RNCC: 3 | RNVC: 2

22 Apr 1999

5340-14-554-1736
Mounting Bracket

145541736
82055066000: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-413-8904
Access Cover

144138904
140839-2: RNCC: 3 | RNVC: 2
75063: RNCC: 5 | RNVC: 2
140839: RNCC: 5 | RNVC: 2

22 Jan 1987

5340-14-553-3314
Retaining Strap

145533314
44037294AB: RNCC: 3 | RNVC: 2

26 Mar 2007

5340-14-470-7172
Mounting Bracket

144707172
365A61-3542-0301: RNCC: 3 | RNVC: 2

29 Jun 1994

5340-14-215-9083
Runner

142159083
253-5M364P36E: RNCC: 3 | RNVC: 9
PA253-5M364P36E: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-472-8798
Turnbuckle Body

144728798
332A41-4122-20: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-377-8608
Pipe Hanger

143778608
6459000: RNCC: 3 | RNVC: 2
AT070IN80: RNCC: 5 | RNVC: 9
85-691-7233: RNCC: 6 | RNVC: 9

10 Jun 1982

5340-14-419-5421
Locking Stay

144195421
M208-61026: RNCC: 3 | RNVC: 2

21 Oct 1987

5340-14-512-5487
Section Block Clamp

145125487
F706-71-02: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-493-3442
Buckle

144933442
NO PRIMARY REF14-493-3442: RNCC: 3 | RNVC: 2
LE11009: RNCC: 5 | RNVC: 9
F300 0T 012 4838: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-521-2457
Mounting Bracket

145212457
341A64-1266-20: RNCC: 3 | RNVC: 2

12 Jul 2000

5340-14-538-0191
Mounting Bracket

145380191
NS-0283: RNCC: 3 | RNVC: 2

9 Dec 2003

5340-14-545-9770
Kick Door Plate

145459770
332A08-0865-27: RNCC: 3 | RNVC: 2

1 Jun 2005

5340-14-040-1595
Angle Bracket

140401595
NO PRIMARY REF14-040-1595: RNCC: 3 | RNVC: 2
708474: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-321-4156
Rod End Clevis

143214156
A0249-001F21: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-512-5466
Section Block Clamp

145125466
F704-72-02M1: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-520-8842
Blank Panel

145208842
CAP-Q01844B00: RNCC: 3 | RNVC: 2

21 Jun 2000

5340-14-439-3939
Runner

144393939
DA2C632020804: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-462-6673
Bumper

144626673
71091: RNCC: 3 | RNVC: 2
63172: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-14-449-3165
Runner

144493165
548A015: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-434-7031
Retaining Strap

144347031
536225: RNCC: 3 | RNVC: 2

2 Oct 1989

5340-14-396-2142
Bumper

143962142
477407V: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-443-1445
Cover Strip

144431445
DA2C244926703A3: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-14-342-5136
Vent Plug

143425136
24C1212: RNCC: 3 | RNVC: 2

16 May 1977

5340-14-551-5110
Mounting Bracket

145515110
RA1B702446081: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-480-0096
Retaining Strap

144800096
1805088: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-554-3277
Mounting Bracket

145543277
82120077000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-578-5574
Utility Resilient Mount

145785574
0137 93: RNCC: 3 | RNVC: 2

10 Dec 2013

5340-14-528-1710
Mounting Bracket

145281710
8036422P00: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-14-434-5096
Cover Strip

144345096
DA1D203365410: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-382-9147
Mending Plate

143829147
148191-30: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-545-2537
Cover Strip

145452537
S215A4013208: RNCC: 3 | RNVC: 2

29 Mar 2005

5340-14-449-1341
Retaining Strap

144491341
10135070: RNCC: 3 | RNVC: 2

31 Jul 1991

5340-14-434-9069
Magnetic Base

144349069
511123: RNCC: 3 | RNVC: 2

9 Oct 1989

5340-14-351-0038
Retaining Strap

143510038
208916: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-547-9727
Angle Bracket

145479727
RA1M701236221: RNCC: 3 | RNVC: 2

30 Nov 2005

5340-14-397-8206
Rod End Clevis

143978206
M4ZS763D1204B: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-470-4777
Access Cover

144704777
267-298760: RNCC: 3 | RNVC: 2

22 Jun 1994

5340-14-439-1952
Access Cover

144391952
16007576: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-299-0642
Loop Clamp

142990642
45N18: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-488-6628
Mounting Bracket

144886628
38510469: RNCC: 3 | RNVC: 2
38510469: RNCC: 5 | RNVC: 9

28 May 1997

5340-14-473-9432
Access Cover

144739432
20859327: RNCC: 3 | RNVC: 2
20859327: RNCC: 3 | RNVC: 9

18 Jan 1995

5340-14-519-7305
Mounting Plate

145197305
29483199: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-14-544-3287
Mounting Bracket

145443287
22355-91: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-14-518-4634
Mounting Plate

145184634
T713A0001117: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-438-4062
Mounting Bracket

144384062
1401000: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-554-9432
Loop Clamp

145549432
78651DH4AG: RNCC: 1 | RNVC: 2
78651DH4AG: RNCC: 3 | RNVC: 2

11 Sep 2007

5340-14-485-6383
Mounting Bracket

144856383
27133524-7: RNCC: 3 | RNVC: 2

6 Feb 1997

5340-14-307-1898
Loop Clamp

143071898
21S0500502: RNCC: 3 | RNVC: 2
21S5-28-8: RNCC: 5 | RNVC: 2
21S5-28-8: RNCC: 5 | RNVC: 2
21S0500502: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-501-6980
Flush Catch Claw

145016980
91713675: RNCC: 3 | RNVC: 2
16-7-3291: RNCC: 3 | RNVC: 2

5 Nov 1997

5340-14-434-1189
Webbing Strap

144341189
4802G1-5: RNCC: 3 | RNVC: 2
608875: RNCC: 3 | RNVC: 2
4802G1-5: RNCC: 5 | RNVC: 2
AM005: RNCC: 5 | RNVC: 2

6 Sep 1989

5340-14-376-3405
Retaining Strap

143763405
2-28680: RNCC: 3 | RNVC: 2

30 Mar 1982

5340-14-430-6085
Rod End Connector

144306085
PM1A472056070N1: RNCC: 3 | RNVC: 2
PM1A472056070N1: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-417-8086
Quick Release Pin

144178086
3001TMA117: RNCC: 3 | RNVC: 2

27 Jul 1987

5340-14-507-4880
Loop Clamp

145074880
COLLI00076: RNCC: 3 | RNVC: 2

16 Jul 1998

5340-14-475-8606
Clamping Catch

144758606
GP.08-IB: RNCC: 3 | RNVC: 2
1036775C00: RNCC: 5 | RNVC: 2

10 May 1995

5340-14-282-5353
Retaining Strap

142825353
M119824: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-518-9052
Mounting Plate

145189052
0391700251: RNCC: 3 | RNVC: 2

25 Feb 2000

5340-14-250-4465
Loop Clamp

142504465
ST406M63P25: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-517-2139
Loop Clamp

145172139
2106019005: RNCC: 3 | RNVC: 2
9560171010: RNCC: 5 | RNVC: 2

17 Nov 1999

5340-14-533-6743
Mounting Bracket

145336743
F1262962: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-14-434-2126
Mounting Plate

144342126
1113206: RNCC: 3 | RNVC: 2
0217427N00: RNCC: 5 | RNVC: 2
1113206: RNCC: 5 | RNVC: 9

13 Sep 1989

5340-14-236-3039
Angle Bracket

142363039
BY148A10127: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-431-4093
Bridge Clamp

144314093
007300010P: RNCC: 3 | RNVC: 2

17 Apr 1989

5340-14-547-9762
Angle Bracket

145479762
RA1M701366141N1: RNCC: 3 | RNVC: 2

30 Nov 2005

5340-14-460-9974
Mounting Bracket

144609974
5000995267: RNCC: 3 | RNVC: 2

17 Feb 1993

5340-14-346-8041
Compression Cup

143468041
154005: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-14-304-2217
Retaining Strap

143042217
174092: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-514-6447
Bumper

145146447
331387: RNCC: 3 | RNVC: 9
CHN331387: RNCC: 5 | RNVC: 9

3 Jun 1999

5340-14-504-6741
Rim Lock Set

145046741
E7414102: RNCC: 3 | RNVC: 9

25 Feb 1998

5340-14-504-6299
Angle Bracket

145046299
F00164833: RNCC: 3 | RNVC: 2
F00164833: RNCC: 5 | RNVC: 9

25 Feb 1998

5340-14-480-9659
Loop Clamp

144809659
51111905039: RNCC: 3 | RNVC: 2
25P39: RNCC: 5 | RNVC: 2

11 Apr 1996

5340-14-482-0922
Mounting Bracket

144820922
22396494: RNCC: 3 | RNVC: 2
22396494: RNCC: 5 | RNVC: 9

20 Jun 1996

5340-14-507-7770
Mounting Bracket

145077770
29475369: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-14-507-2461
Mounting Bracket

145072461
10449082: RNCC: 3 | RNVC: 2

24 Jun 1998

5340-14-530-9375
Mounting Bracket

145309375
710441: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-14-454-5080
Mounting Plate

144545080
16170603: RNCC: 3 | RNVC: 2

2 Apr 1992

5340-14-554-3275
Mounting Bracket

145543275
82374023000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-506-2967
Angle Bracket

145062967
38660230: RNCC: 3 | RNVC: 2
38660230: RNCC: 5 | RNVC: 9

22 Apr 1998

5340-14-554-3273
Mounting Bracket

145543273
82374013000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-554-9415
Loop Clamp

145549415
78651DH22CF: RNCC: 1 | RNVC: 2
78651DH22CF: RNCC: 3 | RNVC: 2

11 Sep 2007

5340-14-548-5999
Angle Bracket

145485999
RA1B702206555: RNCC: 3 | RNVC: 2

26 Jan 2006

5340-14-546-2083
Mounting Bracket

145462083
RA1A703156111N1: RNCC: 3 | RNVC: 2

15 Jun 2005

5340-14-444-3951
Mounting Bracket

144443951
03035100000NW0A: RNCC: 3 | RNVC: 2
EDM1304: RNCC: 5 | RNVC: 2
39515521: RNCC: 5 | RNVC: 2

9 Jan 1991

5340-14-549-0901
Angle Bracket

145490901
RA1M701752191N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-518-4675
Bumper

145184675
T716A40T0003: RNCC: 1 | RNVC: 2
150301681T: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-300-6061
Rod End Clevis

143006061
9290: RNCC: 3 | RNVC: 2
9290: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-460-3197
Support Hook

144603197
TNS1C3013A: RNCC: 3 | RNVC: 2

21 Jan 1993

5340-14-434-7032
Access Cover

144347032
019449D: RNCC: 3 | RNVC: 2

2 Oct 1989

5340-14-512-9295
Mounting Bracket

145129295
00301276: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-486-3615
Mounting Plate

144863615
10043671: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-525-8700
Access Cover

145258700
P711850: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-450-7752
Plug Button

144507752
6710: RNCC: 3 | RNVC: 2
91719665: RNCC: 5 | RNVC: 2

23 Oct 1991

5340-14-520-1696
Mounting Plate

145201696
39255382: RNCC: 3 | RNVC: 2
39255382: RNCC: 3 | RNVC: 9

17 May 2000

5340-14-361-2192
Anchor Strap

143612192
5000114084: RNCC: 3 | RNVC: 2
5000114084: RNCC: 5 | RNVC: 9

24 Jan 1980

5340-14-479-3385
Access Cover

144793385
0850444E00: RNCC: 3 | RNVC: 2

10 Jan 1996

5340-14-318-5057
Threaded Rod End

143185057
CV15-408547-5: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-504-3387
Bow Handle

145043387
3901077M91: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-323-0226
Mending Plate

143230226
79025727: RNCC: 3 | RNVC: 2
79025727: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-297-5801
Access Cover

142975801
79274-76: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-323-7726
Angle Bracket

143237726
16536281: RNCC: 3 | RNVC: 2
16536281: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-343-1576
Angle Bracket

143431576
4770010600: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-14-305-2456
Bow Handle

143052456
173816: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-279-1697
Access Cover

142791697
350: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-413-9715
Webbing Strap

144139715
ST406M32P32: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-502-3979
Butt Hinge

145023979
330A41-2220-1731: RNCC: 3 | RNVC: 2

11 Dec 1997

5340-14-305-0518
Angle Bracket

143050518
M3C705-023: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-486-6108
Butt Hinge

144866108
A10-12-734-34-2: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-14-286-8876
Rod End Clevis

142868876
A10-29-200-38-2: RNCC: 3 | RNVC: 2
A10-29-200-38-2: RNCC: 5 | RNVC: 2
A10-29-200-38-2: RNCC: 5 | RNVC: 2
85-666-1580: RNCC: 6 | RNVC: 9

1 Jan 1972

5340-14-419-2379
Retaining Strap

144192379
6323-17: RNCC: 3 | RNVC: 2
9252515280: RNCC: 5 | RNVC: 2
9406323170: RNCC: 5 | RNVC: 2
9252515280: RNCC: 5 | RNVC: 2

16 Oct 1987

5340-14-395-7198
Rod End Clevis

143957198
RT5546-59: RNCC: 3 | RNVC: 2

17 Dec 2002

5340-14-512-5545
Retaining Strap

145125545
F764-025: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-369-9274
Retaining Clip

143699274
C90246: RNCC: 3 | RNVC: 2
C90246: RNCC: 5 | RNVC: 2
R07379-01: RNCC: 5 | RNVC: 2
R07379-01: RNCC: 5 | RNVC: 2
209450: RNCC: 5 | RNVC: 2
C90246: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-257-2282
Cover Strip

142572282
330A25-2202-35: RNCC: 3 | RNVC: 2
330A25-2202-3500: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-361-7880
Swivel Caster

143617880
TP1BR063-36L: RNCC: 3 | RNVC: 2
TL1BR63-26LP0: RNCC: 5 | RNVC: 2

20 Feb 1980

5340-14-429-5178
Access Cover

144295178
755-2013: RNCC: 3 | RNVC: 2

27 Jan 1989

5340-14-490-2963
Access Cover

144902963
J05085-03-0400P002: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-441-2212
Mounting Bracket

144412212
6801V32-2666-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-327-2529
Retaining Strap

143272529
BM113716: RNCC: 3 | RNVC: 2
85-679-8450: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-300-0632
Bumper

143000632
02540003010: RNCC: 3 | RNVC: 2
15-023: RNCC: 5 | RNVC: 2
0176393W00: RNCC: 5 | RNVC: 2
3597470019306: RNCC: 5 | RNVC: 2
254003-10: RNCC: 5 | RNVC: 2
30303479MAA: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-318-3051
Mending Plate

143183051
26-720021-24: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-465-1810
Bow Handle

144651810
365P68-1512-02: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-323-4665
Loop Clamp

143234665
F709-006: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-303-5188
Sliding Door Track

143035188
3160S25-21-066: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-504-6023
Plug Button

145046023
A4-0393: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-14-323-3778
Handwheel

143233778
GSM137-018F5REP1: RNCC: 3 | RNVC: 2
000MA060R1F5: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-302-4729
Loop Clamp

143024729
3160S78-01-206: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-470-5442
Loop Clamp

144705442
EA5M701-56-18: RNCC: 3 | RNVC: 2

22 Jun 1994

5340-14-485-9975
Retaining Strap

144859975
10276005: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-14-031-3532
Handwheel

140313532
627-86: RNCC: 3 | RNVC: 2
0200965C00: RNCC: 5 | RNVC: 2
627-86: RNCC: 5 | RNVC: 9

14 Jun 1980

5340-14-363-0549
Angle Bracket

143630549
26258700: RNCC: 3 | RNVC: 2
26258700: RNCC: 3 | RNVC: 9

3 Apr 1980

5340-14-450-6117
Loop Clamp

144506117
28GE8: RNCC: 3 | RNVC: 2

15 Oct 1991

5340-14-447-3787
Mounting Plate

144473787
16214911: RNCC: 3 | RNVC: 2

15 May 1991

5340-14-523-7109
Mounting Plate

145237109
R5320329: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-572-6583
Utility Resilient Mount

145726583
8537451: RNCC: 3 | RNVC: 2
91911019: RNCC: 5 | RNVC: 2

23 Jul 2012

5340-14-515-5328
Mounting Plate

145155328
150G4305: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-418-0548
Surface Bolt

144180548
024337Y01TM79: RNCC: 3 | RNVC: 2
024337Y: RNCC: 5 | RNVC: 2

6 Aug 1987

5340-14-462-7493
Pipe Hanger

144627493
PM1A522124003: RNCC: 3 | RNVC: 2
PM1A522124003: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-14-435-9110
Bail Handle

144359110
39059690: RNCC: 3 | RNVC: 2

29 Nov 1989

5340-14-470-8277
Cover Strip

144708277
T700A5610008102: RNCC: 3 | RNVC: 2

6 Jul 1994

5340-14-404-3930
Quick Release Pin

144043930
51453C16R220D: RNCC: 3 | RNVC: 2
147997-32: RNCC: 5 | RNVC: 2
51453C16R220D: RNCC: 5 | RNVC: 2
51453C16R220D: RNCC: 5 | RNVC: 2
51453C16R220D: RNCC: 5 | RNVC: 9

30 Oct 1985

5340-14-336-7059
Butt Hinge

143367059
196774: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-547-1683
Mounting Bracket

145471683
5010631090: RNCC: 3 | RNVC: 2

29 Sep 2005

5340-14-340-8836
Key Blank

143408836
40X70X600ACB165TRAITE: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-554-1256
Loop Clamp

145541256
352 710: RNCC: 3 | RNVC: 2
352 710: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-417-3147
Mending Plate

144173147
20062167: RNCC: 3 | RNVC: 2
20062167: RNCC: 5 | RNVC: 9

1 Jul 1987

5340-14-484-4129
Bumper

144844129
3950309: RNCC: 3 | RNVC: 2
39.50309: RNCC: 5 | RNVC: 2

14 Nov 1996

5340-14-518-5965
Protection Bellows

145185965
5010059539: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-489-7479
Clamping Catch

144897479
F300 0T 004 0957: RNCC: 3 | RNVC: 2
CR40P170ZB: RNCC: 5 | RNVC: 9

13 Aug 1997

5340-14-250-3609
Retaining Strap

142503609
ST406M52P615: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-464-1493
Mounting Bracket

144641493
10211845: RNCC: 3 | RNVC: 2

15 Jul 1993

5340-14-545-7886
Mounting Bracket

145457886
710738: RNCC: 3 | RNVC: 2

13 May 2005

5340-14-549-0858
Angle Bracket

145490858
RA1M705252111N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-466-2423
Mounting Bracket

144662423
TB4050102: RNCC: 3 | RNVC: 2

3 Nov 1993

5340-14-484-7435
Mounting Plate

144847435
2342586H00: RNCC: 3 | RNVC: 2

5 Dec 1996

5340-14-392-5342
Retaining Strap

143925342
254116: RNCC: 3 | RNVC: 2
254116: RNCC: 5 | RNVC: 9

21 Mar 1984

5340-14-357-9635
Retaining Strap

143579635
08841000020: RNCC: 3 | RNVC: 2
88410: RNCC: 5 | RNVC: 2

20 Jul 1979

5340-14-499-4627
Mounting Bracket

144994627
3802670T00: RNCC: 3 | RNVC: 2
3802670T00: RNCC: 3 | RNVC: 2
3802670T00: RNCC: 5 | RNVC: 9
F300 0T 022 4605: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-480-0221
Door Hook

144800221
COR01NM010400: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-396-5394
Retaining Strap

143965394
222317: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-369-9530
Webbing Strap

143699530
398102170200: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-445-2453
Mounting Bracket

144452453
233710H: RNCC: 3 | RNVC: 2

6 Feb 1991

5340-14-554-8817
Loop Clamp

145548817
78651RH12CG: RNCC: 1 | RNVC: 2
78651RH12CG: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-441-1011
Angle Bracket

144411011
16766051: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-455-3681
Mounting Bracket

144553681
406439116: RNCC: 3 | RNVC: 9

21 May 1992

5340-14-452-1829
Mounting Bracket

144521829
008171051P: RNCC: 3 | RNVC: 2

23 Dec 1991

5340-14-535-1691
Angle Bracket

145351691
5000920159: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-387-8969
Loop Clamp

143878969
76341053: RNCC: 3 | RNVC: 2
76341-5-3: RNCC: 5 | RNVC: 9

12 Oct 1983

5340-14-202-3146
Loop Clamp

142023146
STD159: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-550-7695
Bumper

145507695
D68174: RNCC: 3 | RNVC: 2
D68174: RNCC: 5 | RNVC: 2

13 Jul 2006

5340-14-415-8556
Bumper

144158556
DLT121154: RNCC: 3 | RNVC: 2
RAR3454: RNCC: 5 | RNVC: 2

21 May 1987

5340-14-452-6343
Mounting Plate

144526343
29388197: RNCC: 3 | RNVC: 9

15 Jan 1992

5340-14-378-4636
Pipe Hanger

143784636
8811979604: RNCC: 3 | RNVC: 2

11 Aug 1982

5340-14-495-3058
Mounting Bracket

144953058
TB1010101F303: RNCC: 3 | RNVC: 2
F300 0T 018 9953: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-485-4757
Mounting Plate

144854757
787641: RNCC: 3 | RNVC: 2

27 Jan 1997

5340-14-516-4277
Mounting Bracket

145164277
TA5044P002: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-14-436-5827
Tubular Fairlead

144365827
DA2C206400430A1: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-516-8486
Mounting Bracket

145168486
101160111500: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-14-291-1379
Hinge Torsion Bar

142911379
34221L863: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-517-7663
Angle Bracket

145177663
009879035P: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-14-484-0276
Angle Bracket

144840276
38512218: RNCC: 3 | RNVC: 2
38512218: RNCC: 5 | RNVC: 9

17 Oct 1996

5340-14-330-3683
Mending Plate

143303683
187559: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-483-4131
Mounting Bracket

144834131
OSS00048: RNCC: 3 | RNVC: 2

12 Sep 1996

5340-14-349-3636
Control Rod

143493636
T70S07: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-527-3467
Strap Hinge

145273467
19218718: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-477-2557
Support Hook

144772557
RA1M219102601U1: RNCC: 3 | RNVC: 2

2 Aug 1995

5340-14-460-0415
Access Cover

144600415
5000655545: RNCC: 3 | RNVC: 2
89287533: RNCC: 5 | RNVC: 2

7 Jan 1993

5340-14-300-0110
Mending Plate

143000110
176545: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-330-3604
Butt Hinge

143303604
30X20: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-468-6463
Lock-Release Lever

144686463
008657222P: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-14-524-5184
Cover Strip

145245184
06S0242901: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-14-527-3966
Mounting Plate

145273966
H145719WB: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-557-7554
Utility Access Door

145577554
R133ACM176: RNCC: 3 | RNVC: 2

8 Jul 2008

5340-14-385-2804
Retaining Strap

143852804
397626: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-284-2055
Strapping

142842055
TY3S1: RNCC: 3 | RNVC: 2
TY3S: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-482-7240
Mounting Bracket

144827240
1100101B00: RNCC: 3 | RNVC: 2

25 Jul 1996

5340-14-345-2851
Loop Clamp

143452851
0CV1000013: RNCC: 3 | RNVC: 2
0CV1000013: RNCC: 5 | RNVC: 2

5 Oct 1977

5340-14-507-7754
Mounting Bracket

145077754
29483250: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-14-486-0241
Mounting Bracket

144860241
21-9177R1: RNCC: 3 | RNVC: 9

26 Feb 1997

5340-14-486-4834
Metal Grille

144864834
1018473W00: RNCC: 3 | RNVC: 2

21 Mar 1997

5340-14-335-3400
Mending Plate

143353400
180513: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-395-7135
Loop Clamp

143957135
61300005010: RNCC: 3 | RNVC: 2
71N10: RNCC: 5 | RNVC: 2
HB71N10: RNCC: 5 | RNVC: 2
9560126110: RNCC: 5 | RNVC: 2

30 Oct 1984

5340-14-362-0956
Control Rod

143620956
B0262-019F19: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-424-2931
Mending Plate

144242931
0308121140: RNCC: 3 | RNVC: 2
89414765: RNCC: 5 | RNVC: 2

19 May 1988

5340-14-422-9618
Runner

144229618
GA5643-1: RNCC: 3 | RNVC: 2

24 Mar 1988

5340-14-245-1873
Loop Clamp

142451873
15115918: RNCC: 3 | RNVC: 2
M115918: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-325-2443
Sliding Door Track

143252443
3160S28-12-010: RNCC: 3 | RNVC: 2
85-656-7140: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-474-3238
Mounting Plate

144743238
262-12-57105-07: RNCC: 3 | RNVC: 2

8 Feb 1995

5340-14-468-1106
Rod End Connector

144681106
332A84-1105-20: RNCC: 3 | RNVC: 2
F300 0T 016 0018: RNCC: 5 | RNVC: 9

9 Feb 1994

5340-14-205-0362
Retaining Strap

142050362
0067620180: RNCC: 3 | RNVC: 2
067-62-018: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-480-2271
Angle Bracket

144802271
0870293X00: RNCC: 3 | RNVC: 2

28 Feb 1996

5340-14-461-2119
Corner Brace

144612119
23MEFL312131303D-REP34: RNCC: 3 | RNVC: 2
23MEFM312131303D-REP34: RNCC: 3 | RNVC: 2
RAB0643: RNCC: 5 | RNVC: 2

2 Mar 1993

5340-14-529-0526
Synchro Clamp

145290526
HD-111-1132: RNCC: 3 | RNVC: 2
8035996D00: RNCC: 5 | RNVC: 2
HD-111-1132: RNCC: 5 | RNVC: 9

6 Mar 2002

5340-14-433-2194
Access Cover

144332194
4202-310A534: RNCC: 3 | RNVC: 2
85-692-8884: RNCC: 6 | RNVC: 9

18 Jul 1989

5340-14-331-8379
Runner

143318379
3511 000 05212: RNCC: 3 | RNVC: 2
3511-000-05212: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-325-6660
Access Cover

143256660
050A57-520653T: RNCC: 3 | RNVC: 2
0520653T00: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-377-9562
Handwheel

143779562
N0507-26A: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-421-8819
Rod End Clevis

144218819
444-16ACIERESTAMPE: RNCC: 3 | RNVC: 2

9 Feb 1988

5340-14-219-0506
Runner

142190506
253-5M663P45C: RNCC: 3 | RNVC: 9
PA253-5M663P45C: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-420-5155
Butt Hinge

144205155
160G732174-08: RNCC: 3 | RNVC: 2

10 Dec 1987

5340-14-373-7449
Access Cover

143737449
955120-205CPV: RNCC: 1 | RNVC: 2
955120-205CPV: RNCC: 3 | RNVC: 2

13 Nov 1981

5340-14-348-8872
Access Cover

143488872
300-676-202P: RNCC: 3 | RNVC: 2
001268020A: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-438-4586
Sliding Door Track

144384586
332A22-1430-44: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-534-0901
Mounting Bracket

145340901
330A85-0122-47: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-510-8761
Mounting Plate

145108761
4311-023-30500: RNCC: 3 | RNVC: 2
9550114960: RNCC: 5 | RNVC: 2

18 Nov 1998

5340-14-485-9161
Mounting Bracket

144859161
332A84-1040-00: RNCC: 3 | RNVC: 2

19 Feb 1997

5340-14-459-5964
Mounting Bracket

144595964
M629-210000: RNCC: 3 | RNVC: 2
028304W: RNCC: 5 | RNVC: 2

10 Dec 1992

5340-14-326-4814
Mending Plate

143264814
105016: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-336-5106
Webbing Strap

143365106
190420: RNCC: 3 | RNVC: 2

14 Aug 1976

5340-14-520-7621
Angle Bracket

145207621
47176462: RNCC: 3 | RNVC: 2

14 Jun 2000

5340-14-476-0924
Angle Bracket

144760924
222-3018-395: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-374-0346
Retaining Strap

143740346
BAZ96991: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-329-0367
Retaining Strap

143290367
0000250725: RNCC: 3 | RNVC: 2
0000250725: RNCC: 5 | RNVC: 9
250725: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-261-9470
Retaining Strap

142619470
M129397: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-385-4105
Mounting Plate

143854105
0285320880: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-418-1139
Mending Plate

144181139
BJM00478: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-323-0830
Angle Bracket

143230830
M109009: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-524-3469
Mounting Plate

145243469
SAMD E 25A24: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-14-404-5474
Mortise Lock Set

144045474
7700654861: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-425-4523
Mounting Plate

144254523
27118013-4: RNCC: 3 | RNVC: 2

5 Jul 1988

5340-14-300-9299
Angle Bracket

143009299
184608: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-466-2992
Mounting Bracket

144662992
A68405: RNCC: 3 | RNVC: 2

3 Nov 1993

5340-14-474-8402
Webbing Strap

144748402
11502: RNCC: 3 | RNVC: 2

8 Mar 1995

5340-14-536-4192
Corner Brace

145364192
T537A2005165: RNCC: 3 | RNVC: 2

5 Aug 2003

5340-14-515-6172
Mounting Plate

145156172
1106393: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-250-6701
Retaining Strap

142506701
FL146666: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-480-2264
Webbing Strap

144802264
0870285M00: RNCC: 3 | RNVC: 2
F300 0T 020 7993: RNCC: 6 | RNVC: 9

28 Feb 1996

5340-14-424-2214
Retaining Strap

144242214
535881: RNCC: 3 | RNVC: 2

19 May 1988

5340-14-449-3715
Block Fairlead

144493715
DA1N201749900: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-439-5008
Mounting Bracket

144395008
H107820: RNCC: 3 | RNVC: 2
89232247: RNCC: 5 | RNVC: 2

10 May 1990

5340-14-466-3178
Cable Retractor

144663178
1391N313: RNCC: 3 | RNVC: 2
91743655: RNCC: 5 | RNVC: 2

3 Nov 1993

5340-14-397-4043
Angle Bracket

143974043
215134: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-14-388-2177
Bridge Clamp

143882177
VTR501-2-45: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-14-330-0170
Rod End Clevis

143300170
880-27-0-365-0: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-325-1087
Retaining Strap

143251087
NO PRIMARY REF14-325-1087: RNCC: 3 | RNVC: 2
NX4: RNCC: 5 | RNVC: 2
12230304-5: RNCC: 5 | RNVC: 2
7764807: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-392-7672
Bail Handle

143927672
NO PRIMARY REF14-392-7672: RNCC: 3 | RNVC: 2
15101-4: RNCC: 5 | RNVC: 9

7 Apr 1984

5340-14-327-8642
Quick Release Pin

143278642
7-090-14-1822: RNCC: 3 | RNVC: 2
85-647-4030: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-352-0278
Access Cover

143520278
300-697-701-0: RNCC: 3 | RNVC: 2
001573010A: RNCC: 5 | RNVC: 2
300-697-701P: RNCC: 5 | RNVC: 2

16 Oct 1978

5340-14-246-2756
Angle Bracket

142462756
NO PRIMARY REF14-246-2756: RNCC: 3 | RNVC: 2
410533-13: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-554-3255
Mounting Plate

145543255
82118676000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-042-9092
Angle Bracket

140429092
A11A221176510: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-354-2536
Expansion Plug

143542536
9899005: RNCC: 3 | RNVC: 2
45899005: RNCC: 5 | RNVC: 2
9899005: RNCC: 5 | RNVC: 2
SAF9899005: RNCC: 5 | RNVC: 9

30 Jan 1979

5340-14-553-6862
Lock Bolt

145536862
82179103000: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-518-5657
Loop Clamp

145185657
5000788479: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-467-4064
Mounting Bracket

144674064
1027470K00: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-14-325-9134
Key Blank

143259134
25511B12X12XC38: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-549-3571
Mounting Bracket

145493571
56293131: RNCC: 3 | RNVC: 2

27 Mar 2006

5340-14-526-5345
Pipe Hanger

145265345
RA1M703936227: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-552-1522
Mounting Plate

145521522
RA1M701924181N1: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-14-392-3960
Retaining Clip

143923960
401MA0566F4: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-350-7297
Retaining Strap

143507297
1030882015: RNCC: 3 | RNVC: 2
1030882015: RNCC: 5 | RNVC: 2

12 Jul 1978

5340-14-544-6113
Surface Bolt

145446113
073233987000021: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-14-542-3658
Rod Retainer Clip

145423658
CLIP10.01: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-14-222-3007
Angle Bracket

142223007
DG7149: RNCC: 3 | RNVC: 9
DG7149A: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-546-0852
Retaining Strap

145460852
61044910AA: RNCC: 3 | RNVC: 2

13 Jun 2005

5340-14-374-8769
Retaining Strap

143748769
DV5316: RNCC: 3 | RNVC: 2

30 Jan 1982

5340-14-475-3299
Angle Bracket

144753299
568119: RNCC: 3 | RNVC: 2

29 Mar 1995

5340-14-031-0759
Angle Bracket

140310759
VDP4234: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-322-4083
Butt Hinge

143224083
438981: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-222-1392
Snap Hook

142221392
32001: RNCC: 3 | RNVC: 9

1 Jan 1966

5340-14-043-1385
Swivel Caster

140431385
065U20-719502N: RNCC: 3 | RNVC: 2

10 Apr 1984

5340-14-031-2373
Butt Hinge

140312373
400485: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-335-2880
Angle Bracket

143352880
197657: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-543-2054
Mounting Bracket

145432054
X25998: RNCC: 3 | RNVC: 2

31 Aug 2004

5340-14-444-9333
Angle Bracket

144449333
572162: RNCC: 3 | RNVC: 2

29 Jan 1991

5340-14-445-3439
Lock-Release Lever

144453439
39409337: RNCC: 3 | RNVC: 2

11 Feb 1991

5340-14-561-1177
Utility Access Door

145611177
8011801M50: RNCC: 3 | RNVC: 2

16 Jun 2009

5340-14-505-3851
Mounting Bracket

145053851
10216045: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-031-2036
Retaining Strap

140312036
5000498237: RNCC: 3 | RNVC: 2
5000498237: RNCC: 5 | RNVC: 9

14 Jun 1980

5340-14-350-5650
Angle Bracket

143505650
C63277: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-539-3566
Mounting Bracket

145393566
AL100050: RNCC: 3 | RNVC: 2

7 Jan 2004

5340-14-417-6593
Retaining Strap

144176593
ST400S60P175: RNCC: 3 | RNVC: 2

22 Jul 1987

5340-14-451-5154
Mounting Plate

144515154
532320: RNCC: 3 | RNVC: 2

21 Nov 1991

5340-14-450-2420
Angle Bracket

144502420
29678485: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-344-6765
Control Rod

143446765
3V41231: RNCC: 3 | RNVC: 2
0T3V41231: RNCC: 5 | RNVC: 2

9 Sep 1977

5340-14-341-8358
Access Cover

143418358
M3B701-59-02: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-390-2367
Mending Plate

143902367
NO PRIMARY REF14-390-2367: RNCC: 3 | RNVC: 2
D10-23817: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-14-449-6264
Bow Handle

144496264
NO PRIMARY REF14-449-6264: RNCC: 3 | RNVC: 2
MR300TGL74: RNCC: 5 | RNVC: 2

28 Aug 1991

5340-14-525-3131
Snap Hook

145253131
332A91-8107-35: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-515-9845
Mounting Bracket

145159845
312-10843-001: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-14-296-8236
Mending Plate

142968236
4H002273-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-532-9930
Access Cover

145329930
4372-0140: RNCC: 3 | RNVC: 2
89304219: RNCC: 5 | RNVC: 2

14 Jan 2003

5340-14-428-5096
Rod End Clevis

144285096
4605EHA000-0002: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-517-5572
Butt Hinge

145175572
38966-01-1830: RNCC: 3 | RNVC: 2
38966-01: RNCC: 5 | RNVC: 2

5 Jan 2000

5340-14-548-8372
Access Cover

145488372
2.12265.21: RNCC: 3 | RNVC: 2

16 Feb 2006

5340-14-552-0463
Mounting Bracket

145520463
FAMV3 228 06 P: RNCC: 3 | RNVC: 2

22 Nov 2006

5340-14-512-7917
Mounting Plate

145127917
109702: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-488-1686
Mounting Plate

144881686
043-07-22A: RNCC: 3 | RNVC: 2

18 Apr 1997

5340-14-476-3649
Loop Clamp

144763649
51311902010: RNCC: 3 | RNVC: 2
21P10: RNCC: 5 | RNVC: 2

7 Jun 1995

5340-14-324-6198
Mending Plate

143246198
440324: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-550-4649
Bridge Clamp

145504649
RA1B450160001: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-505-8316
Mounting Plate

145058316
45607211: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-287-7888
Handwheel

142877888
310533M: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-416-4625
Angle Bracket

144164625
531955: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-14-348-3508
Loop Clamp

143483508
123319100: RNCC: 3 | RNVC: 2
PF12A3CN10: RNCC: 5 | RNVC: 2
PF12A3CN10: RNCC: 5 | RNVC: 9
PF12A3CN10: RNCC: 5 | RNVC: 9
PF12A3NC10: RNCC: 5 | RNVC: 9

29 Mar 1978

5340-14-500-8216
Mounting Plate

145008216
E64009998105: RNCC: 3 | RNVC: 2
F300 0T 024 8418: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-396-5937
Loop Clamp

143965937
6063014: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-497-2722
Lock Bolt

144972722
10264234: RNCC: 3 | RNVC: 2
F300 0T 022 9254: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-515-4027
Loop Clamp

145154027
11610010A: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-550-3939
Mounting Bracket

145503939
2236349740: RNCC: 3 | RNVC: 2

19 Jun 2006

5340-14-230-0578
Loop Clamp

142300578
9121523000: RNCC: 3 | RNVC: 2
9-121523-000: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-448-9226
Mortise Lock Set

144489226
21-04197DR: RNCC: 3 | RNVC: 2
E72340502: RNCC: 5 | RNVC: 2
2104197D: RNCC: 5 | RNVC: 2

24 Jul 1991

5340-14-354-5239
Rod End Connector

143545239
E4M272-56-810: RNCC: 3 | RNVC: 2

31 Jan 1979

5340-14-410-7457
Angle Bracket

144107457
A02358-03-1000P012: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-312-3328
Synchro Clamp

143123328
3-2607-20A: RNCC: 3 | RNVC: 2
3-2607-20: RNCC: 5 | RNVC: 2
3-2757-20: RNCC: 5 | RNVC: 2
3-2757-20A: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-365-3217
Retaining Strap

143653217
650-403-270-0: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-541-9953
Mounting Bracket

145419953
20035-212: RNCC: 3 | RNVC: 2
502118001025A: RNCC: 3 | RNVC: 9
2 0035-212: RNCC: 5 | RNVC: 2

2 Jul 2004

5340-14-512-5656
Lock Bolt

145125656
S8576728: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-547-3976
Webbing Strap

145473976
GENEE229306AC: RNCC: 3 | RNVC: 2

12 Oct 2005

5340-14-413-1614
Retaining Strap

144131614
144245: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-14-555-9903
Angle Bracket

145559903
10517840: RNCC: 3 | RNVC: 2

17 Jan 2008

5340-14-324-5780
Retaining Strap

143245780
1633A117: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-552-0432
Shelf Bracket

145520432
0249921070: RNCC: 3 | RNVC: 2

22 Nov 2006

5340-14-325-7198
Turnbuckle Body

143257198
0160570017: RNCC: 3 | RNVC: 2
0160570017: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-417-0514
Armature Stop

144170514
412802070041: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-14-540-3095
Mounting Plate

145403095
10625092: RNCC: 3 | RNVC: 2

18 Mar 2004

5340-14-536-0906
Mounting Bracket

145360906
3653K005: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-416-0635
Clamping Catch

144160635
G0F32ZB: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-352-1586
Detent Plunger

143521586
9597: RNCC: 3 | RNVC: 2

16 Oct 1978

5340-14-387-6220
Bumper

143876220
213470: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-14-454-2412
Butt Hinge

144542412
16292524: RNCC: 3 | RNVC: 2
16292524: RNCC: 5 | RNVC: 9

26 Mar 1992

5340-14-464-3229
Mounting Bracket

144643229
5110701: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-417-3183
Runner

144173183
550637: RNCC: 3 | RNVC: 2
00550637: RNCC: 5 | RNVC: 2

1 Jul 1987

5340-14-334-4356
Loop Clamp

143344356
0000456114: RNCC: 3 | RNVC: 2
0000456114: RNCC: 3 | RNVC: 9
0000456114: RNCC: 5 | RNVC: 9
456114: RNCC: 5 | RNVC: 9

1 Jun 1976

5340-14-396-2208
Angle Bracket

143962208
476344Q: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-324-7207
Angle Bracket

143247207
GSM1811DET10: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-485-1030
Angle Bracket

144851030
009199050P: RNCC: 3 | RNVC: 2

8 Jan 1997

5340-14-375-8346
Angle Bracket

143758346
68B0425: RNCC: 3 | RNVC: 2
16379113: RNCC: 5 | RNVC: 2

30 Mar 1982

5340-14-509-1968
Clamping Catch

145091968
C7-10: RNCC: 3 | RNVC: 2
91762863: RNCC: 5 | RNVC: 9

21 Oct 1998

5340-14-489-8441
Angle Bracket

144898441
341A69-6635-00: RNCC: 3 | RNVC: 2
341A69663500: RNCC: 5 | RNVC: 2

26 Aug 1997

5340-14-277-6044
Loop Clamp

142776044
NO PRIMARY REF14-277-6044: RNCC: 3 | RNVC: 2
C0L80: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-544-3538
Bolt And Spacer Kit

145443538
251795423-00: RNCC: 3 | RNVC: 2

24 Jan 2005

5340-14-350-2247
Retaining Strap

143502247
SV3-01-07-11: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-328-5936
Angle Bracket

143285936
321A23-2118-20: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-522-8360
Mounting Plate

145228360
713010S240-00A: RNCC: 3 | RNVC: 2

29 Nov 2000

5340-14-451-1135
Bow Handle

144511135
NO PRIMARY REF14-451-1135: RNCC: 3 | RNVC: 2
91558617: RNCC: 5 | RNVC: 2
11011: RNCC: 5 | RNVC: 9

30 Oct 1991

5340-14-501-0748
Utility Access Door

145010748
4372-0038: RNCC: 3 | RNVC: 2
F300 0T 025 1088: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-233-3325
Bow Handle

142333325
3160S73-68-017: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-217-3230
Loop Clamp

142173230
55212-280-000BGZ: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-393-8916
Support Hook

143938916
366A87-1002-56: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-444-9733
Mounting Plate

144449733
12-019-800: RNCC: 3 | RNVC: 2
12-019-800: RNCC: 5 | RNVC: 9

30 Jan 1991

5340-14-393-8161
Angle Bracket

143938161
366A24-0120-CA: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-266-8566
Retaining Strap

142668566
U182-00-25: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-455-9262
Cover Strip

144559262
PM1A232130081: RNCC: 3 | RNVC: 2
PM1A232130081: RNCC: 5 | RNVC: 2
85-801-3058: RNCC: 6 | RNVC: 9

11 Jun 1992

5340-14-522-9084
Mounting Plate

145229084
500-75-00-22: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-14-473-8606
Mounting Bracket

144738606
332A87-0255-01: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-379-3249
Rod End Clevis

143793249
330A98-7501-06: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-507-5181
Blank Panel

145075181
332A22-3189-00: RNCC: 3 | RNVC: 2

16 Jul 1998

5340-14-388-0429
Loop Clamp

143880429
Z100-023-000: RNCC: 3 | RNVC: 2
Z100-023: RNCC: 5 | RNVC: 2

12 Oct 1983

5340-14-552-9558
Access Cover

145529558
606496: RNCC: 3 | RNVC: 2

19 Feb 2007

5340-14-552-9639
Access Cover

145529639
716322: RNCC: 3 | RNVC: 2

19 Feb 2007

5340-14-544-9676
Access Cover

145449676
61156984AA: RNCC: 3 | RNVC: 2

8 Mar 2005

5340-14-485-6288
Access Cover

144856288
NM30800: RNCC: 3 | RNVC: 2

6 Feb 1997

5340-14-441-1013
Access Cover

144411013
16766076: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-530-7335
Access Cover

145307335
4611019047: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-202-0794
Loop Clamp

142020794
0000248445: RNCC: 3 | RNVC: 2
0000248445: RNCC: 5 | RNVC: 9
248445: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-14-546-5900
Angle Bracket

145465900
RA1M701126411: RNCC: 3 | RNVC: 2

20 Jul 2005

5340-14-349-5619
Access Cover

143495619
0044150010: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-382-5993
Rod End Clevis

143825993
16763805: RNCC: 3 | RNVC: 2
16763805: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-513-0480
Mounting Bracket

145130480
PR11: RNCC: 3 | RNVC: 9
RASPR11: RNCC: 5 | RNVC: 9

3 Mar 1999

5340-14-254-4782
Rod End Clevis

142544782
H90C3010: RNCC: 3 | RNVC: 2
530374: RNCC: 5 | RNVC: 2
H90C3010: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-480-6645
Bumper

144806645
263252: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-435-1924
Angle Bracket

144351924
2001062: RNCC: 3 | RNVC: 2

25 Oct 1989

5340-14-374-0491
Angle Bracket

143740491
227805: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-228-0681
Mounting Plate

142280681
0085990280: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-519-0894
Mounting Plate

145190894
4SH890606510: RNCC: 3 | RNVC: 2

7 Mar 2000

5340-14-216-8317
Webbing Strap

142168317
FL076441: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-405-2836
Anchor Strap

144052836
40010800: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-469-1610
Anchor Strap

144691610
969358P03: RNCC: 3 | RNVC: 2
969358P03: RNCC: 5 | RNVC: 9

11 Apr 1994

5340-14-428-9009
Retaining Strap

144289009
16922761: RNCC: 3 | RNVC: 2

22 Dec 1988

5340-14-248-8132
Access Cover

142488132
70820011: RNCC: 3 | RNVC: 2
70820011: RNCC: 5 | RNVC: 9
820011: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-362-2015
Angle Bracket

143622015
A11A221176460: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-318-8648
Rod End Clevis

143188648
0000279144: RNCC: 3 | RNVC: 2
0000279144: RNCC: 5 | RNVC: 9
279144: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-503-7076
Locking Stay

145037076
342: RNCC: 3 | RNVC: 2

28 Jan 1998

5340-14-542-8949
Access Cover

145428949
708010S000-77C: RNCC: 3 | RNVC: 2

14 Aug 2004

5340-14-544-5284
Split Tubular Clip

145445284
21213036: RNCC: 3 | RNVC: 2

8 Feb 2005

5340-14-336-7260
Access Cover

143367260
179717: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-320-4932
Angle Bracket

143204932
0000409254: RNCC: 3 | RNVC: 2
0000409254: RNCC: 5 | RNVC: 9
409254: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-422-9159
Retaining Strap

144229159
232025: RNCC: 3 | RNVC: 2

24 Mar 1988

5340-14-396-4141
Locking Stay

143964141
174CGAUCHE175MM: RNCC: 3 | RNVC: 2
574020124: RNCC: 5 | RNVC: 2

27 Nov 1984

5340-14-372-1388
Lock-Release Lever

143721388
120902145: RNCC: 3 | RNVC: 9

1 Sep 1981

5340-14-537-0473
Runner

145370473
711629: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-14-416-2473
Rim Lock Set

144162473
4160201: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-522-4427
Access Cover

145224427
10609165: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-14-384-0703
Access Cover

143840703
978681: RNCC: 3 | RNVC: 2
978681: RNCC: 5 | RNVC: 2
978681: RNCC: 5 | RNVC: 9

4 May 1983

5340-14-403-9050
Anchor Strap

144039050
3458550: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-324-7233
Access Hole Frame

143247233
4099DET4: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-553-9830
Mounting Plate

145539830
181 173: RNCC: 3 | RNVC: 2
181 173: RNCC: 3 | RNVC: 2

6 Jun 2007

5340-14-567-8246
Utility Guard Rail Section

145678246
M8743609920200: RNCC: 3 | RNVC: 2

13 Apr 2011

5340-14-478-2256
Access Cover

144782256
29657790: RNCC: 3 | RNVC: 2
29657790: RNCC: 3 | RNVC: 9

18 Oct 1995

5340-14-413-9047
Rod End Clevis

144139047
178738: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-472-9716
Angle Bracket

144729716
38660707: RNCC: 3 | RNVC: 2
38660707: RNCC: 5 | RNVC: 9

23 Nov 1994

5340-14-519-2679
Access Cover

145192679
3511 192 03931: RNCC: 3 | RNVC: 2
61975447: RNCC: 5 | RNVC: 2

15 Mar 2000

5340-14-332-7968
Access Cover

143327968
035777: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-546-6140
Access Cover

145466140
TS143003Y00: RNCC: 3 | RNVC: 2

21 Jul 2005

5340-14-335-8579
Locking Stay

143358579
5000156101: RNCC: 3 | RNVC: 2
5000156101: RNCC: 5 | RNVC: 9

24 Jul 1976

5340-14-403-9320
Access Cover

144039320
110579: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-537-8449
Mounting Plate

145378449
T262A1001213: RNCC: 3 | RNVC: 2

28 Nov 2003

5340-14-430-5871
Tubular Fairlead

144305871
PM1A275113230: RNCC: 3 | RNVC: 2
PM1A275113230: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-418-1081
Anchor Strap

144181081
A24501: RNCC: 3 | RNVC: 2
A24501-0000: RNCC: 3 | RNVC: 9
A24501: RNCC: 5 | RNVC: 9
A24501-0000: RNCC: 5 | RNVC: 9

6 Aug 1987

5340-14-450-4947
Bumper

144504947
5000988901: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-14-366-5153
Loop Clamp

143665153
069-11-037: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-525-8110
Mounting Plate

145258110
H116096: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-474-2846
Mounting Bracket

144742846
8183502: RNCC: 3 | RNVC: 2

8 Feb 1995

5340-14-459-6880
Rod End Clevis

144596880
ST159-2M352P33: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-14-409-0745
Angle Bracket

144090745
4771602500: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-436-6384
Cover Strip

144366384
DA2C316114111: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-340-6958
Pipe Hanger

143406958
321A75-0152-12: RNCC: 3 | RNVC: 2
85-688-3012: RNCC: 6 | RNVC: 9

14 Feb 1977

5340-14-303-7348
Butt Hinge

143037348
40BC40X20CADMIE: RNCC: 3 | RNVC: 2
J36190-40X20X2LAIT0NCADMIE: RNCC: 4 | RNVC: 1

1 Jan 1973

5340-14-348-5182
Retaining Strap

143485182
291162-1-16: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-222-7942
Webbing Strap

142227942
LFP54-409: RNCC: 3 | RNVC: 2
LFP54-409: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-441-1905
Metal Grille

144411905
A2800-1-15: RNCC: 3 | RNVC: 2
91700461: RNCC: 5 | RNVC: 2

22 Aug 1990

5340-14-540-5723
Retaining Band

145405723
T341A1001700: RNCC: 3 | RNVC: 2

6 Apr 2004

5340-14-290-3184
Angle Bracket

142903184
0264400370: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-335-7435
Bumper

143357435
4125943: RNCC: 3 | RNVC: 2
SY2342: RNCC: 5 | RNVC: 2
4125943: RNCC: 5 | RNVC: 9
SY2342: RNCC: 5 | RNVC: 9

30 Jun 1976

5340-14-542-7688
Mounting Plate

145427688
G105709: RNCC: 3 | RNVC: 2
G105709: RNCC: 6 | RNVC: 9

13 Aug 2004

5340-14-550-9999
Clamping Catch

145509999
255453: RNCC: 3 | RNVC: 2

18 Aug 2006

5340-14-416-0527
Angle Bracket

144160527
BJM01321: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-450-4972
Retaining Strap

144504972
BLC236474: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-14-353-0577
Arched Cushion

143530577
A11A271210302: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-298-8484
Rim Lock

142988484
484199437: RNCC: 3 | RNVC: 9
304673008: RNCC: 5 | RNVC: 9
504620775: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-375-2919
Bumper

143752919
136-152: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-470-0227
Loop Clamp

144700227
166157: RNCC: 3 | RNVC: 2
89170209: RNCC: 5 | RNVC: 2

25 May 1994

5340-14-535-0645
Clamping Catch

145350645
GP.22-ZB: RNCC: 3 | RNVC: 2
CAE01596: RNCC: 5 | RNVC: 2

30 Apr 2003

5340-14-533-9838
Mounting Bracket

145339838
10671370000: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-455-7759
Mounting Bracket

144557759
0000726878: RNCC: 3 | RNVC: 2

11 Jun 1992

Load More Results