What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 112 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 112 of 446

5340-14-478-8372
Mounting Plate

144788372
44036492: RNCC: 3 | RNVC: 2
44036492: RNCC: 5 | RNVC: 9

23 Nov 1995

5340-14-544-6592
Shelf Bracket

145446592
18090811: RNCC: 3 | RNVC: 2
18090811: RNCC: 5 | RNVC: 2

15 Feb 2005

5340-14-466-2950
Mounting Bracket

144662950
A1-73066: RNCC: 3 | RNVC: 2

3 Nov 1993

5340-14-348-6414
Retaining Strap

143486414
327051: RNCC: 3 | RNVC: 2
20327051-0: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-289-3326
Butt Hinge

142893326
G6699-03: RNCC: 3 | RNVC: 9
062075976: RNCC: 5 | RNVC: 9
75976: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-438-3477
Rod End Connector

144383477
330A91-2025-30: RNCC: 3 | RNVC: 2

14 Mar 1990

5340-14-381-0736
Mounting Plate

143810736
0274603570: RNCC: 3 | RNVC: 2
302-139-101-0: RNCC: 5 | RNVC: 2

14 Dec 1982

5340-14-484-4286
Retaining Clip

144844286
888-355-600-2: RNCC: 3 | RNVC: 2

14 Nov 1996

5340-14-312-3327
Synchro Clamp

143123327
3-2607-32A: RNCC: 3 | RNVC: 2
3-2607-32: RNCC: 5 | RNVC: 2
3-2757-32: RNCC: 5 | RNVC: 2
3-2757-32A: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-287-3088
Angle Bracket

142873088
121E21-210-08-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-363-8657
Rod End Connector

143638657
LRAC89F1-116442: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-531-7047
Installations Guard

145317047
888-434-202-0: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-14-346-4100
Rod End Clevis

143464100
262-10-92109-01: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-481-3476
Handwheel

144813476
34 37 82: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-480-8856
Angle Bracket

144808856
79119061: RNCC: 3 | RNVC: 2
79119061: RNCC: 5 | RNVC: 9
791199061: RNCC: 5 | RNVC: 9

6 Apr 1996

5340-14-550-6174
Angle Bracket

145506174
RA1A703117511: RNCC: 3 | RNVC: 2

3 Jul 2006

5340-14-464-8731
Mounting Bracket

144648731
45610091: RNCC: 3 | RNVC: 2

6 Sep 1993

5340-14-545-4947
Surface Bolt

145454947
F00294165: RNCC: 3 | RNVC: 2

14 Apr 2005

5340-14-554-1255
Loop Clamp

145541255
352 704: RNCC: 3 | RNVC: 2
352 704: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-544-2637
Angle Bracket

145442637
AMPC GENE E213337A: RNCC: 3 | RNVC: 2

14 Jan 2005

5340-14-040-6174
Loop Clamp

140406174
201902700: RNCC: 3 | RNVC: 2
20P27: RNCC: 5 | RNVC: 9
51211905027: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-550-4101
Mounting Bracket

145504101
2237628690: RNCC: 3 | RNVC: 2

19 Jun 2006

5340-14-354-0769
Pipe Hanger

143540769
A11A221172260: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-548-7623
Mounting Plate

145487623
10599909: RNCC: 3 | RNVC: 2

7 Feb 2006

5340-14-430-5227
Butt Hinge

144305227
PM1A127137027: RNCC: 3 | RNVC: 2
PM1A127137027: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-554-3878
Bridge Clamp

145543878
022960: RNCC: 3 | RNVC: 2
22960: RNCC: 5 | RNVC: 2

27 Jun 2007

5340-14-480-9246
Runner

144809246
22073814: RNCC: 3 | RNVC: 2
22073814: RNCC: 5 | RNVC: 9

11 Apr 1996

5340-14-526-4509
Angle Bracket

145264509
RA1M704736330: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-381-6475
Mounting Bracket

143816475
24C612: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-547-4523
Mounting Plate

145474523
5010465071: RNCC: 3 | RNVC: 2

13 Oct 2005

5340-14-479-3392
Detent Plunger

144793392
0850562L00: RNCC: 3 | RNVC: 2

10 Jan 1996

5340-14-353-0327
Angle Bracket

143530327
A11A226110024: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-413-9625
Retaining Strap

144139625
ST400S60P147: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-481-6643
Mounting Plate

144816643
20174620: RNCC: 3 | RNVC: 2

23 May 1996

5340-14-244-5448
Angle Bracket

142445448
NO PRIMARY REF14-244-5448: RNCC: 3 | RNVC: 2
Z19977: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-570-5140
Utility Resilient Mount

145705140
HH11-50-03: RNCC: 3 | RNVC: 2

22 Dec 2011

5340-14-446-3436
Swivel Caster

144463436
SP5-PD-160-47L-31: RNCC: 3 | RNVC: 2
91628993: RNCC: 5 | RNVC: 2

14 Mar 1991

5340-14-532-0000
Runner

145320000
MAT291-0555F3: RNCC: 3 | RNVC: 2

7 Oct 2002

5340-14-298-1030
Retaining Band

142981030
NO PRIMARY REF14-298-1030: RNCC: 3 | RNVC: 2
88697: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-524-7706
Cable Retractor

145247706
J06042-05-5000: RNCC: 3 | RNVC: 2

11 Apr 2001

5340-14-555-7586
Access Cover

145557586
260798831-00: RNCC: 3 | RNVC: 2

12 Dec 2007

5340-14-440-3154
Angle Bracket

144403154
332A58-2023-20: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-376-1652
Bumper

143761652
AETSAV1301-130B: RNCC: 3 | RNVC: 2
AETSAV1301-130A: RNCC: 5 | RNVC: 2
85-691-9700: RNCC: 6 | RNVC: 9

30 Mar 1982

5340-14-263-9611
Cover Strip

142639611
330A25-2202-08: RNCC: 3 | RNVC: 2
330A25-2202-0800: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-335-7382
Access Cover

143357382
414-01193-000: RNCC: 3 | RNVC: 2
414-01193-000: RNCC: 5 | RNVC: 2

30 Jun 1976

5340-14-549-9107
Mounting Bracket

145499107
2092397-001: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-474-1030
Mounting Plate

144741030
F7987 5243-89: RNCC: 3 | RNVC: 9

25 Jan 1995

5340-14-473-3926
Angle Bracket

144733926
332A41-4105-20: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-537-2387
Lock Key

145372387
915487: RNCC: 3 | RNVC: 2

15 Oct 2003

5340-14-543-4474
Mounting Bracket

145434474
072919987000000: RNCC: 3 | RNVC: 2

30 Oct 2004

5340-14-250-0064
Handle Grip

142500064
H90T2506: RNCC: 3 | RNVC: 2
H90T2506: RNCC: 5 | RNVC: 2
530529: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-474-9111
Mounting Plate

144749111
AK35FL: RNCC: 3 | RNVC: 9
5000AK3: RNCC: 5 | RNVC: 9

8 Mar 1995

5340-14-485-6795
Pipe Hanger

144856795
00500100000NN0B: RNCC: 3 | RNVC: 2

6 Feb 1997

5340-14-502-5076
Mounting Bracket

145025076
5000453842: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-222-5474
Loop Clamp

142225474
0000270881: RNCC: 3 | RNVC: 2
270881: RNCC: 5 | RNVC: 9
0000270881: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-315-7272
Retaining Band

143157272
321A69-3522-40-51: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-395-2660
Loop Clamp

143952660
TVD200: RNCC: 3 | RNVC: 2
DLT586308: RNCC: 5 | RNVC: 2
TVD200: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-535-2472
Mounting Bracket

145352472
6501EHE150: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-517-6986
Mounting Bracket

145176986
PM1A606106180: RNCC: 3 | RNVC: 2
PM1A606106180: RNCC: 5 | RNVC: 2

5 Jan 2000

5340-14-527-7462
Access Cover

145277462
706558: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-14-406-9678
Rod End Clevis

144069678
041114-091: RNCC: 3 | RNVC: 2

22 Jan 1986

5340-14-456-5670
Mounting Bracket

144565670
2021107R: RNCC: 3 | RNVC: 2

9 Jul 1992

5340-14-398-8051
Retaining Strap

143988051
5000497837: RNCC: 3 | RNVC: 2
5000497837: RNCC: 5 | RNVC: 9

20 Feb 1985

5340-14-535-1403
Retaining Strap

145351403
58701703: RNCC: 3 | RNVC: 2
5001007613: RNCC: 5 | RNVC: 2

14 May 2003

5340-14-519-5509
Compression Cup

145195509
440340: RNCC: 3 | RNVC: 9

22 Mar 2000

5340-14-504-7912
Rim Lock

145047912
113710: RNCC: 3 | RNVC: 2
DEO113710: RNCC: 5 | RNVC: 9

4 Mar 1998

5340-14-470-8275
Cover Strip

144708275
T700A5610007900: RNCC: 3 | RNVC: 2

6 Jul 1994

5340-14-296-3068
Pipe Hanger

142963068
A68367: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-451-1926
Retaining Strap

144511926
16629059: RNCC: 3 | RNVC: 2
16629059: RNCC: 5 | RNVC: 9

6 Nov 1991

5340-14-552-8057
Mounting Plate

145528057
55027: RNCC: 3 | RNVC: 2

5 Feb 2007

5340-14-488-6791
Mounting Bracket

144886791
38660974: RNCC: 3 | RNVC: 2
38660974: RNCC: 5 | RNVC: 9

28 May 1997

5340-14-040-1401
Rod End Clevis

140401401
330A87-2205-21: RNCC: 3 | RNVC: 2
330A87-2205-2100: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-373-4637
Swivel Caster

143734637
52160SP: RNCC: 3 | RNVC: 2
85-691-8847: RNCC: 6 | RNVC: 9

21 Oct 1981

5340-14-551-6576
Access Cover

145516576
A00-02916-002: RNCC: 3 | RNVC: 2
A00-02916-001: RNCC: 5 | RNVC: 9

12 Oct 2006

5340-14-382-6381
Support Hook

143826381
NO PRIMARY REF14-382-6381: RNCC: 3 | RNVC: 2
16932405: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-466-1968
Mounting Bracket

144661968
F8P002055331001: RNCC: 3 | RNVC: 2
85-695-2287: RNCC: 6 | RNVC: 9

27 Oct 1993

5340-14-406-2504
Support Hook

144062504
341A58-1506-21: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-454-1914
Handwheel

144541914
LN331082-084-085F22REP20: RNCC: 3 | RNVC: 2
LN331082REP20: RNCC: 5 | RNVC: 2
LN331084REP20: RNCC: 5 | RNVC: 2
LN331085REP20: RNCC: 5 | RNVC: 2
412683-001: RNCC: 5 | RNVC: 2

26 Mar 1992

5340-14-512-5470
Section Block Clamp

145125470
F704-73-02M1: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-439-6107
Butt Hinge

144396107
360A21-2116-28: RNCC: 3 | RNVC: 2

16 May 1990

5340-14-546-4222
Loop Clamp

145464222
0543-166-048: RNCC: 3 | RNVC: 2

4 Jul 2005

5340-14-257-0741
Retaining Strap

142570741
C1-48065: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-346-1556
Threaded Rod End

143461556
M267-11151: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-438-1082
Quick Release Pin

144381082
51453C12R40N: RNCC: 3 | RNVC: 2

7 Mar 1990

5340-14-541-5119
Access Cover

145415119
1091319-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-253-4607
Access Cover

142534607
70663402: RNCC: 3 | RNVC: 2
70663402: RNCC: 5 | RNVC: 9
M870106-3: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-458-6802
Eye Hook

144586802
0014050233: RNCC: 3 | RNVC: 2

29 Oct 1992

5340-14-373-6089
Webbing Strap

143736089
136-189: RNCC: 3 | RNVC: 2

13 Nov 1981

5340-14-508-5264
Access Cover

145085264
10428653: RNCC: 3 | RNVC: 2

16 Sep 1998

5340-14-257-6074
Access Cover

142576074
20124: RNCC: 3 | RNVC: 9

1 Jan 1969

5340-14-308-0969
Retaining Strap

143080969
106082001201: RNCC: 3 | RNVC: 2
106082001201: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-402-0984
Anchor Strap

144020984
406120: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-501-0694
Access Cover

145010694
145578027: RNCC: 3 | RNVC: 2
F300 0T 025 1032: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-448-0927
Access Cover

144480927
BA20351: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-14-380-7348
Access Cover

143807348
2556035: RNCC: 3 | RNVC: 2
2556035: RNCC: 5 | RNVC: 2

29 Nov 1982

5340-14-460-0340
Access Cover

144600340
320569: RNCC: 3 | RNVC: 2
320569: RNCC: 5 | RNVC: 9

7 Jan 1993

5340-14-370-7709
Access Cover

143707709
C93364: RNCC: 3 | RNVC: 2
5000611412: RNCC: 5 | RNVC: 2
C93364: RNCC: 5 | RNVC: 2
C93364: RNCC: 5 | RNVC: 9
5000611412: RNCC: 5 | RNVC: 9

5 Jun 1981

5340-14-426-7098
Runner

144267098
20393562: RNCC: 3 | RNVC: 2

15 Sep 1988

5340-14-408-9072
Anchor Strap

144089072
969366: RNCC: 3 | RNVC: 2
969366: RNCC: 5 | RNVC: 9

2 Apr 1986

5340-14-466-6582
Access Cover

144666582
1031443M00: RNCC: 3 | RNVC: 2

22 Nov 1993

5340-14-526-5832
Access Cover

145265832
DH1F293647100: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-395-1514
Clamping Catch

143951514
GE61IB: RNCC: 3 | RNVC: 2
91453697: RNCC: 5 | RNVC: 2

2 Oct 1984

5340-14-476-1349
Access Cover

144761349
NIM200411: RNCC: 3 | RNVC: 2
5340AA8021896: RNCC: 6 | RNVC: 9

23 May 1995

5340-14-432-6595
Rod End Clevis

144326595
1000055: RNCC: 3 | RNVC: 2
950205: RNCC: 5 | RNVC: 2

20 Jun 1989

5340-14-553-9649
Access Cover

145539649
10659503: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-14-489-4353
Access Cover

144894353
3BM02869AAAA: RNCC: 3 | RNVC: 2
3BM02869AAAA: RNCC: 5 | RNVC: 9

23 Jul 1997

5340-14-382-5398
Access Cover

143825398
16318687: RNCC: 3 | RNVC: 2
16318687: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-452-1263
Access Hole Frame

144521263
39512859: RNCC: 3 | RNVC: 2
39512859: RNCC: 5 | RNVC: 9

18 Dec 1991

5340-14-366-5794
Plug Button

143665794
055A14-502082K: RNCC: 3 | RNVC: 2
0502082K00: RNCC: 5 | RNVC: 2

20 Nov 1980

5340-14-454-8843
Access Cover

144548843
ST442M15P42: RNCC: 3 | RNVC: 2
1211124P012: RNCC: 5 | RNVC: 2
ST442M15P42: RNCC: 5 | RNVC: 9

24 Apr 1992

5340-14-354-3173
Plug Button

143543173
16323885: RNCC: 3 | RNVC: 2
16323885: RNCC: 5 | RNVC: 9

30 Jan 1979

5340-14-497-4225
Flush Catch Claw

144974225
703154: RNCC: 3 | RNVC: 2

15 Oct 1997

5340-14-418-4835
Leaf Spring

144184835
L80G244LD735EP8: RNCC: 3 | RNVC: 2
L80G244-9: RNCC: 5 | RNVC: 2
R80G244LD735EP8: RNCC: 5 | RNVC: 2
1105-165: RNCC: 5 | RNVC: 2

26 Aug 1987

5340-14-351-1987
Strap Fastener Loop

143511987
3144-32: RNCC: 3 | RNVC: 9

10 Aug 1978

5340-14-499-2127
Bow Handle

144992127
01602534: RNCC: 3 | RNVC: 2
19-7-3646: RNCC: 5 | RNVC: 9
F300 0T 019 9413: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-536-2162
Angle Bracket

145362162
RA1M216900411N1: RNCC: 3 | RNVC: 2

22 Jul 2003

5340-14-497-6327
Mounting Plate

144976327
5K5093: RNCC: 3 | RNVC: 2
F300 0T 023 4371: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-553-4746
Mounting Plate

145534746
0319100840: RNCC: 3 | RNVC: 2

5 Apr 2007

5340-14-502-5009
Control Rod

145025009
5000328110: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-236-9779
Retaining Band

142369779
K3364F: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-546-7650
Angle Bracket

145467650
RA1M705236541: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-14-362-3650
Retaining Strap

143623650
23006821: RNCC: 3 | RNVC: 2
FM3-135: RNCC: 5 | RNVC: 2

19 Mar 1980

5340-14-526-2510
Mounting Bracket

145262510
10531465: RNCC: 3 | RNVC: 2

11 Jul 2001

5340-14-416-1614
Mounting Plate

144161614
M259-11011: RNCC: 3 | RNVC: 2
M329-10052: RNCC: 5 | RNVC: 2
M330-10071: RNCC: 5 | RNVC: 2

3 Jun 1987

5340-14-296-0822
Mending Plate

142960822
00307509807: RNCC: 3 | RNVC: 2
5171408100: RNCC: 3 | RNVC: 2
714081: RNCC: 5 | RNVC: 2
3075-98: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-361-7028
Angle Bracket

143617028
D03315-02: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-433-7774
Mending Plate

144337774
365A69-2049-21: RNCC: 3 | RNVC: 2

9 Aug 1989

5340-14-534-5665
Mounting Plate

145345665
DC1E202769831A1: RNCC: 3 | RNVC: 2

26 Mar 2003

5340-14-382-3892
Mending Plate

143823892
BAZ96649: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-419-4214
Mending Plate

144194214
20062165: RNCC: 3 | RNVC: 2
20062165: RNCC: 5 | RNVC: 9
20062165: RNCC: 5 | RNVC: 9

16 Oct 1987

5340-14-472-3632
Mounting Bracket

144723632
231523F: RNCC: 3 | RNVC: 2

19 Oct 1994

5340-14-396-0840
Bumper

143960840
0000323955: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-523-2556
Angle Bracket

145232556
RA1M702846141: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-448-6177
Mounting Plate

144486177
20117385: RNCC: 3 | RNVC: 2
20117385: RNCC: 5 | RNVC: 2

4 Jul 1991

5340-14-366-6162
Retaining Strap

143666162
034412: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-554-9433
Loop Clamp

145549433
78651DH7AG: RNCC: 1 | RNVC: 2
78651DH7AG: RNCC: 3 | RNVC: 2

11 Sep 2007

5340-14-518-7156
Mounting Bracket

145187156
101165401040: RNCC: 3 | RNVC: 2

16 Feb 2000

5340-14-330-7466
Angle Bracket

143307466
F10A705200002: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-408-5495
Support Hook

144085495
44037: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-464-3429
Mounting Bracket

144643429
ST406M52G85: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-311-9989
Bumper

143119989
26256636: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-381-8221
Retaining Strap

143818221
20190922: RNCC: 3 | RNVC: 2
20190922: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-534-2996
Stand Base

145342996
NNM0021010104527: RNCC: 2 | RNVC: 2

19 Mar 2003

5340-14-554-3507
Mounting Bracket

145543507
82173311000: RNCC: 3 | RNVC: 2

22 Jun 2007

5340-14-420-4616
Angle Bracket

144204616
06153977: RNCC: 3 | RNVC: 2

10 Dec 1987

5340-14-434-0796
Bumper

144340796
0870128E00: RNCC: 3 | RNVC: 2

5 Sep 1989

5340-14-535-7882
Threaded Rod End

145357882
0940600800: RNCC: 3 | RNVC: 2
36403043: RNCC: 5 | RNVC: 2

25 Jun 2003

5340-14-479-1214
Turnbuckle Body

144791214
LA01PD040102: RNCC: 3 | RNVC: 9
LA01PD040102: RNCC: 5 | RNVC: 2

13 Dec 1995

5340-14-230-6457
Retaining Strap

142306457
DLT000841: RNCC: 3 | RNVC: 2
DLT00841: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-451-2312
Pipe Hanger

144512312
PM1A726122320: RNCC: 3 | RNVC: 2
PM1A726122320: RNCC: 5 | RNVC: 2

6 Nov 1991

5340-14-472-3795
Pipe Hanger

144723795
PM1A725422261: RNCC: 3 | RNVC: 2
PM1A725422261: RNCC: 5 | RNVC: 2

19 Oct 1994

5340-14-481-4529
Bridge Clamp

144814529
34 70 52: RNCC: 3 | RNVC: 2

8 May 1996

5340-14-376-7583
Loop Clamp

143767583
21S0400604: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-467-8373
Elastic Strap

144678373
7700721890: RNCC: 3 | RNVC: 2

27 Jan 1994

5340-14-558-6159
Utility Resilient Mount

145586159
82373128000: RNCC: 3 | RNVC: 2

16 Oct 2008

5340-14-357-9524
Angle Bracket

143579524
391342: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-14-468-5344
Loop Clamp

144685344
51423105006: RNCC: 3 | RNVC: 2
28GE6: RNCC: 5 | RNVC: 2

3 Mar 1994

5340-14-542-3456
Mounting Plate

145423456
10649951: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-14-429-0835
Bumper

144290835
741218: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-14-383-3511
Handwheel

143833511
1686621020: RNCC: 3 | RNVC: 2
1686621020: RNCC: 5 | RNVC: 2

11 Apr 1983

5340-14-374-0345
Retaining Strap

143740345
BAZ96980: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-534-9661
Strapping

145349661
HFP 2640: RNCC: 3 | RNVC: 2
DV098994: RNCC: 6 | RNVC: 9

23 Apr 2003

5340-14-541-8427
Mounting Bracket

145418427
F1262625: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-448-1025
Retaining Strap

144481025
0120721801: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-14-469-7556
Mounting Plate

144697556
114250-11900: RNCC: 3 | RNVC: 2

10 May 1994

5340-14-446-7332
Angle Bracket

144467332
39958461: RNCC: 3 | RNVC: 2
39958461: RNCC: 5 | RNVC: 9

9 Apr 1991

5340-14-419-5374
Clamping Catch

144195374
61560: RNCC: 3 | RNVC: 2

21 Oct 1987

5340-14-470-7584
Mounting Bracket

144707584
0390787070: RNCC: 3 | RNVC: 2

6 Jul 1994

5340-14-434-0046
Mounting Bracket

144340046
535950: RNCC: 3 | RNVC: 2

29 Aug 1989

5340-14-355-2905
Mending Plate

143552905
1012127: RNCC: 3 | RNVC: 2
FOE1012127: RNCC: 5 | RNVC: 9

19 Mar 1979

5340-14-350-4526
Mending Plate

143504526
207259: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-375-7978
Retaining Strap

143757978
16603335: RNCC: 3 | RNVC: 2

30 Mar 1982

5340-14-348-6817
Angle Bracket

143486817
225202: RNCC: 3 | RNVC: 2
225202: RNCC: 5 | RNVC: 9

19 Apr 1978

5340-14-446-1404
Strap Hinge

144461404
39959419: RNCC: 3 | RNVC: 2
39959419: RNCC: 5 | RNVC: 9

6 Mar 1991

5340-14-268-9923
Handwheel

142689923
000MA0060F6-5C1: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-535-1840
Corner Brace

145351840
5000915410: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-348-7044
Runner

143487044
1137245: RNCC: 3 | RNVC: 2
1137245: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-523-1837
Mounting Plate

145231837
45411957: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-244-4746
Angle Bracket

142444746
366106: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-409-7352
Mending Plate

144097352
437930: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-364-5924
Retaining Strap

143645924
5000495357: RNCC: 3 | RNVC: 2
5000495357: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-369-9775
Retaining Strap

143699775
F103677: RNCC: 3 | RNVC: 2
F103677: RNCC: 6 | RNVC: 9

18 May 1981

5340-14-429-0459
Bridge Clamp

144290459
1101696: RNCC: 3 | RNVC: 9

4 Jan 1989

5340-14-387-3236
Rim Lock Set

143873236
DLK40L: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-14-456-1528
Mounting Bracket

144561528
3511 191 32511: RNCC: 3 | RNVC: 2

18 Jun 1992

5340-14-523-5239
Clamping Catch

145235239
8021306A00: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-14-569-3827
Utility Resilient Mount

145693827
7421784954: RNCC: 3 | RNVC: 2
21784954: RNCC: 5 | RNVC: 2

9 Sep 2011

5340-14-466-6994
Angle Bracket

144666994
820852A67: RNCC: 3 | RNVC: 2

24 Nov 1993

5340-14-471-6619
Webbing Strap

144716619
7525263: RNCC: 3 | RNVC: 2
0C07525263: RNCC: 5 | RNVC: 2
5001821586: RNCC: 5 | RNVC: 2

7 Sep 1994

5340-14-454-8432
Mounting Bracket

144548432
ST406M28P11E58: RNCC: 3 | RNVC: 2

24 Apr 1992

5340-14-531-7174
Loop Clamp

145317174
1SPAL4020PPDPALAS: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-14-532-0599
Cover Strip

145320599
03-250-545: RNCC: 3 | RNVC: 2
SZ03.250.545: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-553-9801
Mounting Bracket

145539801
62B7776: RNCC: 3 | RNVC: 2

6 Jun 2007

5340-14-459-1144
Mounting Bracket

144591144
A46612: RNCC: 3 | RNVC: 2

19 Nov 1992

5340-14-512-0209
Butt Hinge

145120209
0052885: RNCC: 3 | RNVC: 2

2 Feb 1999

5340-14-535-0145
Runner

145350145
550600: RNCC: 3 | RNVC: 9

28 Apr 2003

5340-14-228-0703
Retaining Strap

142280703
0202110490: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-451-3941
Bridge Clamp

144513941
AMG204903: RNCC: 3 | RNVC: 2
204903: RNCC: 5 | RNVC: 2

18 Nov 1991

5340-14-425-9136
Angle Bracket

144259136
BFP00832: RNCC: 3 | RNVC: 2

28 Jul 1988

5340-14-549-6707
Blank Panel

145496707
2715638170: RNCC: 3 | RNVC: 2

26 Apr 2006

5340-14-470-0296
Corner Brace

144700296
263864: RNCC: 3 | RNVC: 2

25 May 1994

5340-14-476-8274
Dashpot

144768274
462130AA: RNCC: 3 | RNVC: 2

5 Jul 1995

5340-14-520-5254
Bumper

145205254
46061884: RNCC: 3 | RNVC: 2
46061884: RNCC: 5 | RNVC: 9

22 May 2000

5340-14-475-7290
Mounting Bracket

144757290
L24CE55: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-14-457-6096
Plate Spacer

144576096
PM1A939100005: RNCC: 3 | RNVC: 2
PM1A939100005: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-526-1053
Bumper

145261053
20 242 020 8290: RNCC: 3 | RNVC: 2

4 Jul 2001

5340-14-544-3364
Mounting Bracket

145443364
82070743000: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-14-518-9951
Angle Bracket

145189951
704137: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-508-6294
Mounting Bracket

145086294
009483210P: RNCC: 3 | RNVC: 2

23 Sep 1998

5340-14-353-0515
Pipe Hanger

143530515
A11A231474090: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-553-1510
Mounting Bracket

145531510
0249960180: RNCC: 3 | RNVC: 2

6 Mar 2007

5340-14-296-9445
Caster Frame

142969445
173364: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-479-2669
Access Cover

144792669
23628306-0: RNCC: 3 | RNVC: 2

3 Jan 1996

5340-14-529-7091
Pin Removable Head

145297091
160500-2: RNCC: 3 | RNVC: 2

4 Apr 2002

5340-14-550-4986
Mounting Bracket

145504986
6801DPA112: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-525-7575
Lock Bolt

145257575
48 10 401 10: RNCC: 3 | RNVC: 2
48 10 401 10: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-458-9912
Handwheel

144589912
D9026: RNCC: 3 | RNVC: 2
RAR3529: RNCC: 5 | RNVC: 2

10 Nov 1992

5340-14-514-0366
Mounting Bracket

145140366
PM1A726119081Q1: RNCC: 3 | RNVC: 2
PM1A726119081Q1: RNCC: 5 | RNVC: 2

22 Apr 1999

5340-14-484-6585
Retaining Strap

144846585
29404271: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-545-5292
Loop Clamp

145455292
56090135: RNCC: 3 | RNVC: 2

18 Apr 2005

5340-14-526-1717
Bumper

145261717
5010157588: RNCC: 3 | RNVC: 2

5 Jul 2001

5340-14-521-3397
Mounting Plate

145213397
10419680: RNCC: 3 | RNVC: 2

20 Jul 2000

5340-14-545-2958
Mounting Bracket

145452958
S304A2052100: RNCC: 3 | RNVC: 2

1 Apr 2005

5340-14-485-1254
Rim Lock

144851254
2141203+JO: RNCC: 3 | RNVC: 2

10 Jan 1997

5340-14-505-1505
Mounting Bracket

145051505
CMB001000101: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-367-5967
Detent Plunger

143675967
10749200: RNCC: 3 | RNVC: 2
5681: RNCC: 5 | RNVC: 2

19 Jan 1981

5340-14-526-5162
Compression Cup

145265162
D65893: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-306-4318
Mending Plate

143064318
0249922290: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-343-7802
Retaining Strap

143437802
FA1F705-41: RNCC: 3 | RNVC: 2

13 Jul 1977

5340-14-398-7058
Loop Clamp

143987058
J05085-04-0200P013: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-512-3120
Mounting Bracket

145123120
30392091: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-14-214-3785
Loop Clamp

142143785
514131050075: RNCC: 3 | RNVC: 2
38GT7: RNCC: 5 | RNVC: 2
514131190075: RNCC: 5 | RNVC: 2

1 Jan 1965

5340-14-285-4661
Retaining Strap

142854661
242-84: RNCC: 3 | RNVC: 2
RTM242-84: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-385-5323
Retaining Strap

143855323
4386000: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-454-8685
Anchor Strap

144548685
5000932478: RNCC: 3 | RNVC: 2

24 Apr 1992

5340-14-439-6116
Protection Bellows

144396116
360A27-2450-20: RNCC: 3 | RNVC: 2

16 May 1990

5340-14-483-8749
Access Cover

144838749
704546-1: RNCC: 3 | RNVC: 2

5 Oct 1996

5340-14-224-2648
Luggage Handle

142242648
3215: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-554-3283
Mounting Bracket

145543283
82124478000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-522-6130
Kick Door Plate

145226130
2344501: RNCC: 3 | RNVC: 2

8 Nov 2000

5340-14-360-2223
Doorknob

143602223
16294721: RNCC: 3 | RNVC: 2
16294721: RNCC: 5 | RNVC: 9

23 Nov 1979

5340-14-554-9442
Loop Clamp

145549442
78651RH33CG: RNCC: 1 | RNVC: 2
78651RH33CG: RNCC: 3 | RNVC: 2

11 Sep 2007

5340-14-537-8452
Mounting Plate

145378452
T262A1001214: RNCC: 3 | RNVC: 2

28 Nov 2003

5340-14-396-5900
Retaining Strap

143965900
6057934: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-466-6193
Angle Bracket

144666193
4177438: RNCC: 3 | RNVC: 2

17 Nov 1993

5340-14-494-5666
Angle Bracket

144945666
769 014 277: RNCC: 3 | RNVC: 2
F300 0T 017 4863: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-495-6931
Bumper

144956931
306071017005A: RNCC: 3 | RNVC: 9
F300 0T 019 6517: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-454-2413
Butt Hinge

144542413
16292525: RNCC: 3 | RNVC: 2
16292525: RNCC: 5 | RNVC: 9

26 Mar 1992

5340-14-488-5790
Bumper

144885790
JOINT00551: RNCC: 3 | RNVC: 2

21 May 1997

5340-14-501-6507
Mounting Bracket

145016507
45283540: RNCC: 3 | RNVC: 2
45283540: RNCC: 3 | RNVC: 9

5 Nov 1997

5340-14-482-5011
Angle Bracket

144825011
PM1A711124127: RNCC: 3 | RNVC: 2
PM1A711124127: RNCC: 5 | RNVC: 2

11 Jul 1996

5340-14-339-3010
Angle Bracket

143393010
2080: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-407-9704
Mounting Bracket

144079704
M4HZ731P2105: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-224-4435
Mending Plate

142244435
A67709: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-551-6921
Mounting Bracket

145516921
8210804000: RNCC: 3 | RNVC: 2

17 Oct 2006

5340-14-523-1501
Clamping Catch

145231501
AMV004: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-367-8458
Access Cover

143678458
1632D03: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-446-1517
Rigid Caster

144461517
56200SP: RNCC: 3 | RNVC: 2
91391306: RNCC: 5 | RNVC: 2

6 Mar 1991

5340-14-476-8667
Loop Clamp

144768667
51121905019: RNCC: 3 | RNVC: 2
25PE19: RNCC: 5 | RNVC: 2

5 Jul 1995

5340-14-213-0938
Angle Bracket

142130938
302063: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-505-6416
Mounting Bracket

145056416
E25001000058: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-547-5310
Angle Bracket

145475310
RA1A704776517A1: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-553-9625
Mounting Plate

145539625
82034422000: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-14-523-7436
Mounting Bracket

145237436
10617688: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-382-9236
Access Cover

143829236
094033K: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-295-4538
Mending Plate

142954538
A71239: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-517-1373
Loop Clamp

145171373
8004052X01: RNCC: 3 | RNVC: 2
8004052X00: RNCC: 5 | RNVC: 2

10 Nov 1999

5340-14-527-6089
Loop Clamp

145276089
11313109015: RNCC: 3 | RNVC: 2
435729: RNCC: 5 | RNVC: 2

30 Oct 2001

5340-14-377-1682
Bow Handle

143771682
165: RNCC: 3 | RNVC: 9
E72360102: RNCC: 5 | RNVC: 2

17 May 1982

5340-14-266-0811
Mortise Lock Set

142660811
PRATIC194TETIERE20MM: RNCC: 3 | RNVC: 9
50675D16: RNCC: 5 | RNVC: 2
PRATIC192TETIERE20MM: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-366-7768
Flush Catch Claw

143667768
158688: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-541-1402
Mounting Bracket

145411402
3861A035: RNCC: 3 | RNVC: 2
3861A035: RNCC: 3 | RNVC: 2

14 May 2004

5340-14-452-9293
Pipe Hanger

144529293
15040010M: RNCC: 3 | RNVC: 2

28 Jan 1992

5340-14-476-0760
Mounting Bracket

144760760
F00132781: RNCC: 3 | RNVC: 2
F00132781: RNCC: 5 | RNVC: 9

17 May 1995

5340-14-550-4839
Mounting Bracket

145504839
RA1A702606651: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-353-1430
Angle Bracket

143531430
574024191: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-506-0208
Shelf Bracket

145060208
RA1M112115011N1: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-14-532-1351
Mounting Plate

145321351
5010559911: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-14-463-3945
Mounting Plate

144633945
0024000145: RNCC: 3 | RNVC: 2
89297157: RNCC: 5 | RNVC: 2

9 Jun 1993

5340-14-445-1559
Mounting Bracket

144451559
BLC9589: RNCC: 3 | RNVC: 2

4 Feb 1991

5340-14-534-2902
Mounting Bracket

145342902
10657498: RNCC: 3 | RNVC: 2

19 Mar 2003

5340-14-271-0142
Loop Clamp

142710142
3160S73-39-545: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-533-9824
Mounting Bracket

145339824
10653062: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-376-4828
Angle Bracket

143764828
16787920: RNCC: 3 | RNVC: 2
16787920: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-523-2534
Pipe Hanger

145232534
RA1M702336353N1: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-268-9603
Rod End Clevis

142689603
NO PRIMARY REF14-268-9603: RNCC: 3 | RNVC: 2
2494REP35: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-480-6557
Anchor Strap

144806557
5010113605: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-364-4313
Rod End Clevis

143644313
AGRAFEPC8: RNCC: 3 | RNVC: 2
91305911: RNCC: 5 | RNVC: 2

2 Sep 1980

5340-14-551-3563
Angle Bracket

145513563
RA1A702336349: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-473-6793
Mounting Plate

144736793
332P61-6605-0051: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-516-2964
Bridge Clamp

145162964
004Q917: RNCC: 3 | RNVC: 2
004Q917: RNCC: 5 | RNVC: 2

17 Sep 1999

5340-14-554-9784
Clamping Catch

145549784
504800A5500284S00: RNCC: 3 | RNVC: 2
504800A5500284S00: RNCC: 5 | RNVC: 9

14 Sep 2007

5340-14-555-5577
Arched Cushion

145555577
PM1A526060701: RNCC: 3 | RNVC: 2
PM1A526060701: RNCC: 5 | RNVC: 2

27 Nov 2007

5340-14-405-5236
Rod End Clevis

144055236
J05107-02-2410P004: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-458-1166
Synchro Clamp

144581166
31502810: RNCC: 3 | RNVC: 9

8 Oct 1992

5340-14-506-2192
Pipe Hanger

145062192
38222877: RNCC: 3 | RNVC: 2
38222877: RNCC: 5 | RNVC: 9

15 Apr 1998

5340-14-444-0889
Access Cover

144440889
A46447-36: RNCC: 3 | RNVC: 2
A46447-36: RNCC: 5 | RNVC: 2

18 Dec 1990

5340-14-551-5425
Mounting Bracket

145515425
20020878: RNCC: 3 | RNVC: 2

29 Sep 2006

5340-14-421-9189
Mounting Plate

144219189
V2PM3033-108223: RNCC: 3 | RNVC: 2
V2PM3033-108223: RNCC: 5 | RNVC: 2
85-693-4289: RNCC: 6 | RNVC: 9

10 Feb 1988

5340-14-502-5654
Clamping Catch

145025654
5000976038: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-531-2569
Loop Clamp

145312569
52313106015: RNCC: 3 | RNVC: 2

6 Aug 2002

5340-14-530-5958
Bumper

145305958
960102: RNCC: 3 | RNVC: 2
A09060250: RNCC: 3 | RNVC: 2

26 Jun 2002

5340-14-515-4202
Loop Clamp

145154202
41130015A: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-213-7808
Bow Handle

142137808
25326: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-543-9815
Bridge Clamp

145439815
RP16104: RNCC: 3 | RNVC: 9

19 Dec 2004

5340-14-536-4198
Mounting Bracket

145364198
T713A0001145: RNCC: 3 | RNVC: 2

5 Aug 2003

5340-14-502-8489
Mounting Bracket

145028489
9R7565: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-519-8147
Access Cover

145198147
204778: RNCC: 3 | RNVC: 2

11 Apr 2000

5340-14-536-9729
Rod End Clevis

145369729
081605490: RNCC: 3 | RNVC: 2
081605490: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-14-528-5813
Access Cover

145285813
908628: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-496-9604
Mounting Bracket

144969604
1056551: RNCC: 3 | RNVC: 2
1056551: RNCC: 5 | RNVC: 2
F300 0T 022 3248: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-525-1672
Mounting Bracket

145251672
ISO20NACA27: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-550-6222
Loop Clamp

145506222
171344: RNCC: 3 | RNVC: 2

3 Jul 2006

5340-14-497-4135
Utility Access Door

144974135
1031100: RNCC: 3 | RNVC: 2
1031100: RNCC: 5 | RNVC: 2
F300 0T 023 1431: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-551-5458
Access Cover

145515458
712355: RNCC: 3 | RNVC: 2

29 Sep 2006

5340-14-385-1822
Anchor Strap

143851822
0000709064: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-525-7778
Rod End Clevis

145257778
C105189: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-542-7595
Access Cover

145427595
61080832AA: RNCC: 3 | RNVC: 2

12 Aug 2004

5340-14-443-2038
Access Cover

144432038
1023386L00: RNCC: 3 | RNVC: 2

12 Nov 1990

5340-14-453-8566
Access Cover

144538566
PAL01PD000008: RNCC: 3 | RNVC: 9

12 Mar 1992

5340-14-312-9799
Access Cover

143129799
0824147000: RNCC: 3 | RNVC: 2
0824147000: RNCC: 3 | RNVC: 2
0824147000: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-551-2851
Mounting Bracket

145512851
RA1N701356265: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-488-7438
Access Cover

144887438
1106440R00: RNCC: 3 | RNVC: 2

28 May 1997

5340-14-551-5321
Cover Strip

145515321
SZ00.251.198: RNCC: 3 | RNVC: 2

28 Sep 2006

5340-14-407-9834
Plug Button

144079834
M4Z7301422501: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-272-7520
Rod End Clevis

142727520
202911: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-555-0944
Mounting Plate

145550944
82156916000: RNCC: 3 | RNVC: 2

27 Sep 2007

5340-14-334-5149
Access Cover

143345149
30300: RNCC: 3 | RNVC: 9
A0303: RNCC: 5 | RNVC: 9

1 Jun 1976

5340-14-395-5069
Mounting Bracket

143955069
5-1881B43152-727: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-551-2029
Bumper

145512029
1ME50260205: RNCC: 3 | RNVC: 2

6 Sep 2006

5340-14-467-0298
Support Hook

144670298
008633222P: RNCC: 3 | RNVC: 2

16 Dec 1993

5340-14-540-5321
Access Cover

145405321
19221206: RNCC: 3 | RNVC: 2

1 Apr 2004

5340-14-469-2463
Loop Clamp

144692463
52213105026: RNCC: 3 | RNVC: 2
110G26: RNCC: 5 | RNVC: 2

13 Apr 1994

5340-14-550-9098
Cover Strip

145509098
RA1B701916535: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-515-5226
Bumper

145155226
9403172100: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-549-3078
Mounting Bracket

145493078
5010631673: RNCC: 3 | RNVC: 2

21 Mar 2006

5340-14-551-3440
Angle Bracket

145513440
RA1M701245111N1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-474-8085
Plug Button

144748085
45676294: RNCC: 3 | RNVC: 9

1 Mar 1995

5340-14-435-6989
Loop Clamp

144356989
E1240-2: RNCC: 3 | RNVC: 2
5000589841: RNCC: 5 | RNVC: 2

20 Nov 1989

5340-14-379-9228
Butt Hinge

143799228
1-30X40GAUCHELAITONNICKELE: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-210-6588
Retaining Strap

142106588
0000133048: RNCC: 3 | RNVC: 2
0000133048: RNCC: 5 | RNVC: 9
133048: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-489-7145
Cushioning Pad

144897145
1700-32: RNCC: 3 | RNVC: 2

11 Aug 1997

5340-14-480-9597
Flush Catch Claw

144809597
1302131P211: RNCC: 3 | RNVC: 2

11 Apr 1996

5340-14-446-3534
Mounting Bracket

144463534
NH93461: RNCC: 3 | RNVC: 2
1105771M00: RNCC: 5 | RNVC: 2

18 Mar 1991

5340-14-499-4757
Loop Clamp

144994757
45232363: RNCC: 3 | RNVC: 2
4-523236-3: RNCC: 5 | RNVC: 2
F300 0T 022 7832: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-222-6708
Rod End Connector

142226708
2030-3202: RNCC: 3 | RNVC: 2
0948411903: RNCC: 5 | RNVC: 2
0948411903: RNCC: 5 | RNVC: 9
2030-3202: RNCC: 5 | RNVC: 9
948411903: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-508-1331
Mounting Bracket

145081331
10182999: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-475-0236
Angle Bracket

144750236
75865: RNCC: 3 | RNVC: 2
10354974: RNCC: 5 | RNVC: 2

16 Mar 1995

5340-14-508-1713
Mounting Bracket

145081713
DA8100001: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-355-1149
Mending Plate

143551149
525576: RNCC: 3 | RNVC: 2
00525576: RNCC: 5 | RNVC: 2

19 Mar 1979

5340-14-467-3298
Shelf Bracket

144673298
DAV25838: RNCC: 3 | RNVC: 9

5 Jan 1994

5340-14-354-0074
Pipe Hanger

143540074
A11A232952090A1: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-541-5465
Mounting Plate

145415465
31104085: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-507-9726
Mounting Bracket

145079726
46234347: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-508-4288
Mounting Plate

145084288
10213661: RNCC: 3 | RNVC: 2

9 Sep 1998

5340-14-504-0935
Angle Bracket

145040935
29661835: RNCC: 3 | RNVC: 2
29661835: RNCC: 3 | RNVC: 9

5 Feb 1998

5340-14-525-7492
Angle Bracket

145257492
04202956: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-504-3373
Butt Hinge

145043373
3900677M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-549-0892
Angle Bracket

145490892
RA1M701208251N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-548-5691
Mounting Plate

145485691
5010465970: RNCC: 3 | RNVC: 2

26 Jan 2006

5340-14-521-3007
Mounting Plate

145213007
10491070: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-14-541-5401
Angle Bracket

145415401
1092974: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-518-1612
Mounting Bracket

145181612
5010065504: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-513-2125
Mounting Bracket

145132125
1792913102: RNCC: 3 | RNVC: 2

10 Mar 1999

5340-14-508-6659
Poker

145086659
TISON00001: RNCC: 3 | RNVC: 2

23 Sep 1998

5340-14-382-6267
Angle Bracket

143826267
16497581: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-546-5581
Mounting Bracket

145465581
5010148083: RNCC: 3 | RNVC: 2

20 Jul 2005

5340-14-383-0735
Loop Clamp

143830735
53286-1-6: RNCC: 3 | RNVC: 2
53286-1-6: RNCC: 5 | RNVC: 9
P53286-1-6: RNCC: 5 | RNVC: 9

17 Mar 1983

5340-14-425-2687
Angle Bracket

144252687
30331216E: RNCC: 3 | RNVC: 2

29 Jun 1988

5340-14-297-4584
Lock-Release Lever

142974584
5494-2: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-488-8927
Synchro Clamp

144888927
0036300500: RNCC: 3 | RNVC: 2
0036300500: RNCC: 3 | RNVC: 2
3630.050 9: RNCC: 5 | RNVC: 2
F300 0T 023 6020: RNCC: 6 | RNVC: 9

11 Jun 1997

5340-14-372-9026
Quick Release Pin

143729026
5543: RNCC: 3 | RNVC: 2

21 Sep 1981

5340-14-226-5458
Snap Hook

142265458
1928-1: RNCC: 3 | RNVC: 2
AB23-1: RNCC: 5 | RNVC: 2
AB23D: RNCC: 5 | RNVC: 2
1928-1: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-455-3834
Mounting Plate

144553834
DE100542: RNCC: 3 | RNVC: 2
89468107: RNCC: 5 | RNVC: 2
DE100542: RNCC: 5 | RNVC: 9

21 May 1992

5340-14-312-4980
Sliding Door Track

143124980
A10-23-540-01-1: RNCC: 3 | RNVC: 2
A10-23-540-01-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-513-2021
Retaining Clip

145132021
FL1011003: RNCC: 3 | RNVC: 2

10 Mar 1999

5340-14-531-2407
Webbing Strap

145312407
F1264716: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-551-9787
Blank Panel

145519787
82165636000: RNCC: 3 | RNVC: 2

15 Nov 2006

5340-14-524-2049
Retaining Strap

145242049
ST159-2M882P32: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-483-2700
Mounting Plate

144832700
4MC800314: RNCC: 3 | RNVC: 2
4MC800314: RNCC: 5 | RNVC: 2
4MC801541: RNCC: 5 | RNVC: 2
91397611: RNCC: 5 | RNVC: 2
4MC800314: RNCC: 5 | RNVC: 9
6115AA2071316: RNCC: 6 | RNVC: 9

29 Aug 1996

5340-14-346-8158
Buckle

143468158
141972: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-14-280-7689
Mounting Bracket

142807689
310648: RNCC: 3 | RNVC: 2
310648: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-435-5067
Cover Strip

144355067
DA1D203366411: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-14-402-1039
Mending Plate

144021039
400549: RNCC: 3 | RNVC: 2
BGE400549: RNCC: 5 | RNVC: 2

26 Jun 1985

5340-14-501-5921
Mounting Bracket

145015921
145 579 000: RNCC: 3 | RNVC: 2
89231757: RNCC: 5 | RNVC: 2
145579000: RNCC: 5 | RNVC: 2
F300 0T 018 2481: RNCC: 6 | RNVC: 9

5 Nov 1997

5340-14-516-4299
Synchro Clamp

145164299
TA5044P007: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-14-557-8333
Utility Access Door

145578333
MDS82P002: RNCC: 3 | RNVC: 2

21 Jul 2008

5340-14-549-0606
Angle Bracket

145490606
RA1M215170162N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-554-9446
Webbing Strap

145549446
030524B: RNCC: 3 | RNVC: 2

12 Sep 2007

5340-14-465-8842
Runner

144658842
5230316: RNCC: 3 | RNVC: 2

14 Oct 1993

5340-14-384-2955
Runner

143842955
CR0Q1BECNC0QUEREPC: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-440-3060
Blank Panel

144403060
3511-190-37281: RNCC: 3 | RNVC: 2
89288150: RNCC: 5 | RNVC: 2

11 Jul 1990

5340-14-530-3125
Bumper

145303125
512251-12: RNCC: 3 | RNVC: 2
512251VARIANTE12: RNCC: 5 | RNVC: 2

29 May 2002

5340-14-390-0122
Loop Clamp

143900122
51315302003: RNCC: 3 | RNVC: 2
21S03: RNCC: 5 | RNVC: 2
A0021-21S03: RNCC: 5 | RNVC: 2
ASNA0021-21S03: RNCC: 5 | RNVC: 2

26 Jan 1984

5340-14-542-0482
Loop Clamp

145420482
21662137-005: RNCC: 3 | RNVC: 2
502106024022A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-393-3414
Loop Clamp

143933414
321A84-9903-20: RNCC: 3 | RNVC: 2
85-692-4876: RNCC: 6 | RNVC: 9

7 Apr 1984

5340-14-527-9734
Mounting Plate

145279734
330A34-1120-24: RNCC: 3 | RNVC: 2

5 Dec 2001

5340-14-390-6169
Rod End Clevis

143906169
FA888-90042047219: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-461-4533
Mounting Plate

144614533
BC137A010-124: RNCC: 3 | RNVC: 9
1003900W00: RNCC: 5 | RNVC: 2

10 Mar 1993

5340-14-490-4697
Mounting Bracket

144904697
741-30-113: RNCC: 3 | RNVC: 2

2 Oct 1997

5340-14-482-9200
Pipe Hanger

144829200
78731-083-100: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-406-2435
Bumper

144062435
5094-09: RNCC: 3 | RNVC: 2
7910023543: RNCC: 5 | RNVC: 2

8 Jan 1986

5340-14-387-3230
Control Rod

143873230
710050-20: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-14-404-6552
Rod End Clevis

144046552
10624-06-06: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-339-4989
Angle Bracket

143394989
M3R702-62: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-394-2225
Handwheel

143942225
NO PRIMARY REF14-394-2225: RNCC: 3 | RNVC: 2
3650719: RNCC: 5 | RNVC: 9
3650719: RNCC: 5 | RNVC: 9

23 Jun 1984

5340-14-452-3230
Loop Clamp

144523230
T20-13F1701: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-342-4662
Buckle

143424662
3511-131-47001: RNCC: 3 | RNVC: 2
3511 131 47001: RNCC: 5 | RNVC: 2

16 May 1977

5340-14-311-6562
Mending Plate

143116562
3160S78-04-022: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-432-1496
Bow Handle

144321496
NO PRIMARY REF14-432-1496: RNCC: 3 | RNVC: 2
3511-314-98601: RNCC: 5 | RNVC: 9

24 May 1989

5340-14-326-6744
Loop Clamp

143266744
511131050032: RNCC: 3 | RNVC: 2
55G3: RNCC: 5 | RNVC: 2
85-666-4970: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-544-2594
Mounting Bracket

145442594
22355-102: RNCC: 3 | RNVC: 2

13 Jan 2005

5340-14-424-3638
Loop Clamp

144243638
51100005050: RNCC: 3 | RNVC: 2
15N50: RNCC: 5 | RNVC: 2
A0021-15N50: RNCC: 5 | RNVC: 2

19 May 1988

5340-14-417-4759
Loop Clamp

144174759
51413105017: RNCC: 3 | RNVC: 2
28G17: RNCC: 5 | RNVC: 9
A0021-28G17: RNCC: 5 | RNVC: 9

8 Jul 1987

5340-14-287-5412
Rod End Clevis

142875412
413154: RNCC: 3 | RNVC: 9

1 Jan 1972

5340-14-457-4285
Butt Hinge

144574285
2CH74AZB: RNCC: 3 | RNVC: 2
64552: RNCC: 5 | RNVC: 2
5044353: RNCC: 5 | RNVC: 9

3 Sep 1992

5340-14-418-1194
Rod End Clevis

144181194
058807H01TRA: RNCC: 3 | RNVC: 2
058807H: RNCC: 5 | RNVC: 2

6 Aug 1987

5340-14-367-5566
Access Cover

143675566
101430501: RNCC: 3 | RNVC: 2
101430501: RNCC: 5 | RNVC: 2

19 Jan 1981

5340-14-508-0547
Mounting Bracket

145080547
46243986: RNCC: 3 | RNVC: 2
46243986: RNCC: 5 | RNVC: 9

26 Aug 1998

5340-14-441-4615
Access Cover

144414615
054231202-18: RNCC: 3 | RNVC: 2

29 Aug 1990

5340-14-369-0764
Access Cover

143690764
9003526M: RNCC: 3 | RNVC: 9
ROT9003526M: RNCC: 5 | RNVC: 9

17 Apr 1981

5340-14-386-8270
Rim Lock

143868270
3200G7171: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-444-5769
Hinge Torsion Bar

144445769
95121: RNCC: 3 | RNVC: 2

16 Jan 1991

5340-14-382-2363
Angle Bracket

143822363
A11A221172980A1: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-537-8025
Blank Panel

145378025
8046847F00: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-14-541-1489
Stand Base

145411489
211351: RNCC: 3 | RNVC: 2

14 May 2004

5340-14-526-9984
Bail Handle

145269984
735700001329: RNCC: 3 | RNVC: 2

24 Sep 2001

5340-14-524-0219
Door Handle

145240219
012712: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-14-257-7665
Retaining Clip

142577665
200524: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-517-8225
Detent Plunger

145178225
1030494N00: RNCC: 3 | RNVC: 2
89478519: RNCC: 5 | RNVC: 2

13 Jan 2000

5340-14-382-4924
Loop Clamp

143824924
045S03-576082C: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-375-7602
Angle Bracket

143757602
A11A224113016: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-450-2799
Detent Plunger

144502799
PM1A249101602: RNCC: 3 | RNVC: 2
PM1A249101602: RNCC: 5 | RNVC: 2

25 Sep 1991

5340-14-577-7630
Utility Access Door

145777630
82665738001: RNCC: 3 | RNVC: 2

9 Oct 2013

5340-14-263-3807
Retaining Strap

142633807
R113524: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-518-0251
Mounting Plate

145180251
5010230347: RNCC: 3 | RNVC: 2

21 Jan 2000

5340-14-355-1048
Retaining Strap

143551048
150670: RNCC: 3 | RNVC: 2

19 Mar 1979

5340-14-545-0080
Bumper

145450080
180028: RNCC: 3 | RNVC: 2

14 Mar 2005

5340-14-554-1480
Mounting Bracket

145541480
82050993001: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-428-2742
Support Hook

144282742
15A3164: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-426-3324
Loop Clamp

144263324
24045026500: RNCC: 3 | RNVC: 2
240450265: RNCC: 5 | RNVC: 9
434564: RNCC: 5 | RNVC: 9

23 Aug 1988

5340-14-551-3271
Access Cover

145513271
45271075: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-358-6112
Angle Bracket

143586112
160-792033-03: RNCC: 3 | RNVC: 2
15160-792033-03: RNCC: 5 | RNVC: 2

7 Sep 1979

5340-14-240-6512
Access Cover

142406512
70663216: RNCC: 3 | RNVC: 2
70663216: RNCC: 5 | RNVC: 9
M819032: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-457-5199
Access Cover

144575199
640101: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-349-7368
Rod End Clevis

143497368
41238: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-305-2529
Access Cover

143052529
TH20E508: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-320-3830
Access Cover

143203830
NO PRIMARY REF14-320-3830: RNCC: 3 | RNVC: 2
0035151592: RNCC: 5 | RNVC: 2
0035454592: RNCC: 5 | RNVC: 2
0035151592: RNCC: 5 | RNVC: 9
0035454592: RNCC: 5 | RNVC: 9
T12677: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-331-9818
Rod End Connector

143319818
T12-51P10: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-534-4867
Access Cover

145344867
B001C084-01: RNCC: 3 | RNVC: 2

26 Mar 2003

5340-14-349-3138
Mending Plate

143493138
T20-13F273: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-455-3105
Access Cover

144553105
IF164-450: RNCC: 3 | RNVC: 9

21 May 1992

5340-14-424-9542
Friction Catch

144249542
852-60X14: RNCC: 3 | RNVC: 9

15 Jun 1988

5340-14-385-4500
Rod End Clevis

143854500
4A1137-00-01 PC1: RNCC: 3 | RNVC: 2
4A-1137-00-01 PC1: RNCC: 5 | RNVC: 2
85-801-0127: RNCC: 6 | RNVC: 9

26 Jul 1983

5340-14-513-0379
Lock Bolt

145130379
10496881: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-14-513-8102
Mounting Plate

145138102
DE33123: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-551-2696
Angle Bracket

145512696
RA1M701732101N1: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-526-5282
Bridge Clamp

145265282
S3SD15424-7: RNCC: 3 | RNVC: 2
S3SD15424-7: RNCC: 5 | RNVC: 2

1 Aug 2001

5340-14-493-6778
Rod End Clevis

144936778
443 678 IND.2: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-224-4186
Loop Clamp

142244186
25P17-5: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-403-9301
Anchor Strap

144039301
33464-2: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-529-0429
Access Cover

145290429
27119732-9: RNCC: 3 | RNVC: 2

6 Mar 2002

5340-14-406-3381
Access Cover

144063381
79081726-1: RNCC: 3 | RNVC: 2
79081726-1: RNCC: 5 | RNVC: 9

8 Jan 1986

5340-14-364-2179
Angle Bracket

143642179
CR1656-1: RNCC: 3 | RNVC: 9

7 Aug 1980

5340-14-468-3866
Mounting Bracket

144683866
CV124-1-2: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-14-396-3603
Flush Catch Claw

143963603
472424E: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-479-8307
Casement Fastener

144798307
N20897: RNCC: 3 | RNVC: 2

7 Feb 1996

5340-14-336-2357
Webbing Strap

143362357
502-517-811-0: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-449-1871
Plug Button

144491871
656558-5: RNCC: 3 | RNVC: 2

5 Aug 1991

5340-14-483-7183
Beam Gripping Clamp

144837183
408598: RNCC: 3 | RNVC: 2
408598-003: RNCC: 5 | RNVC: 9

27 Sep 1996

5340-14-437-9488
Butt Hinge

144379488
330A58-3208-21: RNCC: 3 | RNVC: 2

28 Feb 1990

5340-14-376-5266
Anchor Strap

143765266
NO PRIMARY REF14-376-5266: RNCC: 3 | RNVC: 2
404304447: RNCC: 5 | RNVC: 2
404304447: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-505-9002
Loop Clamp

145059002
3630-006: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-496-9929
Cover Strip

144969929
13-128-00: RNCC: 3 | RNVC: 2
13-128-00: RNCC: 5 | RNVC: 9
F300 0T 022 4624: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-226-2655
Anchor Strap

142262655
JEA06-34: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-514-4717
Angle Bracket

145144717
10363535: RNCC: 3 | RNVC: 2
IF-192-2328: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-302-5733
Mounting Bracket

143025733
321A60-9926-20: RNCC: 3 | RNVC: 2
704A67-0420-25: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-522-7321
Mounting Plate

145227321
350A77-1309-24: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-14-246-0598
Bumper

142460598
NO PRIMARY REF14-246-0598: RNCC: 3 | RNVC: 2
13190-48: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-362-6763
Arched Cushion

143626763
650-403-232-0: RNCC: 3 | RNVC: 2
85-800-8442: RNCC: 6 | RNVC: 9

19 Mar 1980

5340-14-418-0332
Retaining Band

144180332
208-09134-00: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-403-4474
Runner

144034474
3511 245 05521: RNCC: 3 | RNVC: 2
3511-245-05521: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-218-7581
Retaining Strap

142187581
3160S26-11-021: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-529-3500
Mounting Plate

145293500
457-12576-000: RNCC: 3 | RNVC: 2

22 Mar 2002

5340-14-340-2421
Angle Bracket

143402421
M271-2181: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-413-9911
Runner

144139911
13-201-05: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-542-0593
Mounting Plate

145420593
26694121-631: RNCC: 3 | RNVC: 2
502106013014A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-444-9720
Dashpot

144449720
122G6-02: RNCC: 3 | RNVC: 2
91596368: RNCC: 5 | RNVC: 2

30 Jan 1991

5340-14-387-5191
Control Rod

143875191
GSM171-212F4: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-14-440-3194
Detent Plunger

144403194
332A58-4573-20: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-541-8518
Mounting Bracket

145418518
J10454-01-4000P001: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-401-0469
Loop Clamp

144010469
51313102005: RNCC: 3 | RNVC: 2
HB21G5: RNCC: 5 | RNVC: 2
SD80803-63: RNCC: 5 | RNVC: 2
A0021-21G5: RNCC: 5 | RNVC: 2
21G5: RNCC: 5 | RNVC: 2

29 May 1985

5340-14-383-6135
Access Cover

143836135
TB30-47059-100: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-534-0904
Synchro Clamp

145340904
330A85-0173-21: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-357-5375
Angle Bracket

143575375
A11A232260170: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-380-1535
Anchor Strap

143801535
536484: RNCC: 3 | RNVC: 2
00536484: RNCC: 5 | RNVC: 2

8 Nov 1982

5340-14-397-1196
Angle Bracket

143971196
20733938: RNCC: 3 | RNVC: 2

1 Dec 1984

5340-14-042-2148
Butt Hinge

140422148
16179456: RNCC: 3 | RNVC: 2
16179456: RNCC: 5 | RNVC: 2
16179456: RNCC: 5 | RNVC: 9

14 Feb 1977

5340-14-364-6061
Mending Plate

143646061
5000495846: RNCC: 3 | RNVC: 2
5000495846: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-388-2453
Retaining Strap

143882453
T8002HD22AREP9: RNCC: 3 | RNVC: 2

12 Oct 1983

Load More Results