What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 109 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 109 of 446

5340-14-390-1393
Detent Plunger

143901393
366A25-1225-20: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-388-7958
Access Cover

143887958
260111456: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-507-6734
Plug Button

145076734
305003: RNCC: 3 | RNVC: 2

11 Aug 1998

5340-14-405-6799
Plug Button

144056799
040-2120: RNCC: 3 | RNVC: 2

4 Dec 1985

5340-14-556-0199
Access Cover

145560199
0319142510: RNCC: 3 | RNVC: 2

21 Jan 2008

5340-14-542-3449
Utility Access Door

145423449
10649720: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-14-480-0134
Runner

144800134
1979001: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-551-2470
Access Cover

145512470
1501008-CFRA: RNCC: 3 | RNVC: 2
1501008-CFRA: RNCC: 5 | RNVC: 2

7 Sep 2006

5340-14-293-3237
Access Cover

142933237
8810131100: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-295-1912
Retaining Strap

142951912
154325: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-551-5070
Angle Bracket

145515070
RA1M704826211A1: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-208-4911
Retaining Strap

142084911
059319: RNCC: 3 | RNVC: 2
M059319: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-480-5564
Mounting Plate

144805564
T1082AA16: RNCC: 3 | RNVC: 2
380870: RNCC: 5 | RNVC: 9
T1082AA16: RNCC: 5 | RNVC: 9

14 Mar 1996

5340-14-548-5998
Mounting Bracket

145485998
RA1B702206531A1: RNCC: 3 | RNVC: 2

26 Jan 2006

5340-14-445-1799
Bumper

144451799
562057: RNCC: 3 | RNVC: 2

4 Feb 1991

5340-14-549-8290
Mounting Plate

145498290
2092587: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-548-4923
Mounting Plate

145484923
5010636849: RNCC: 3 | RNVC: 2

23 Jan 2006

5340-14-504-9466
Mounting Plate

145049466
PLAQU93648B00: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-419-0407
Rod End Clevis

144190407
66-3-08-01D21: RNCC: 3 | RNVC: 2
230108: RNCC: 5 | RNVC: 2

30 Sep 1987

5340-14-206-6145
Access Cover

142066145
611-990-003-0: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-408-8783
Bridge Clamp

144088783
00140720011: RNCC: 3 | RNVC: 2
91678377: RNCC: 5 | RNVC: 2

2 Apr 1986

5340-14-376-6685
Loop Clamp

143766685
420233A: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-439-2924
Cover Strip

144392924
DA2C264931050: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-536-1801
Angle Bracket

145361801
56942276AA: RNCC: 3 | RNVC: 2

11 Jul 2003

5340-14-399-1201
Angle Bracket

143991201
5000714811: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-537-9044
Mounting Plate

145379044
10441087: RNCC: 3 | RNVC: 2

3 Dec 2003

5340-14-536-4204
Mounting Bracket

145364204
T716A2002154: RNCC: 3 | RNVC: 2

5 Aug 2003

5340-14-527-1847
Mounting Plate

145271847
10474179: RNCC: 3 | RNVC: 2

10 Oct 2001

5340-14-406-0520
Door Hook

144060520
M4Z5180904420: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-452-9940
Mounting Bracket

144529940
0003292212: RNCC: 3 | RNVC: 2

29 Jan 1992

5340-14-553-1205
Loop Clamp

145531205
0249870110: RNCC: 3 | RNVC: 2

5 Mar 2007

5340-14-250-4123
Retaining Strap

142504123
ST406M53P129: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-549-3702
Snap Hook

145493702
954079: RNCC: 3 | RNVC: 2

27 Mar 2006

5340-14-520-6116
Mounting Bracket

145206116
45683737: RNCC: 3 | RNVC: 2

24 May 2000

5340-14-439-2066
Mounting Bracket

144392066
16006165: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-505-0872
Mounting Plate

145050872
01475500: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-550-9064
Retaining Bail

145509064
RA1B794300812: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-546-2060
Angle Bracket

145462060
RA1A706236531: RNCC: 3 | RNVC: 2

15 Jun 2005

5340-14-554-8809
Loop Clamp

145548809
78651CT25CF: RNCC: 1 | RNVC: 2
78651CT25CF: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-555-4842
Bumper

145554842
5010377235: RNCC: 3 | RNVC: 2

21 Nov 2007

5340-14-560-4119
Utility Access Door

145604119
95180: RNCC: 3 | RNVC: 2

16 Apr 2009

5340-14-441-1749
Metal Grille

144411749
20122410: RNCC: 3 | RNVC: 2
20122410: RNCC: 5 | RNVC: 9

22 Aug 1990

5340-14-506-4350
Access Cover

145064350
C26361-K345-B104: RNCC: 3 | RNVC: 2
C26361-K345-B104: RNCC: 5 | RNVC: 2
C26361K345B104: RNCC: 5 | RNVC: 2

29 Apr 1998

5340-14-461-2515
Mounting Plate

144612515
BC101A010-106: RNCC: 3 | RNVC: 9
0780723R00: RNCC: 5 | RNVC: 2

3 Mar 1993

5340-14-485-0739
Mounting Bracket

144850739
332A54-3002-0081: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-14-553-5476
Cable Retractor

145535476
3730B39-17: RNCC: 3 | RNVC: 2

16 Apr 2007

5340-14-450-0229
Retaining Strap

144500229
045H00-572743K: RNCC: 3 | RNVC: 2
0572743K04: RNCC: 5 | RNVC: 2
89275815: RNCC: 5 | RNVC: 2

18 Sep 1991

5340-14-481-8380
Angle Bracket

144818380
312-18500-001: RNCC: 3 | RNVC: 2

1 Jun 1996

5340-14-524-9280
Mounting Bracket

145249280
E75450453: RNCC: 3 | RNVC: 2

3 May 2001

5340-14-301-4556
Butt Hinge

143014556
704007050C: RNCC: 3 | RNVC: 2
J36-190-70X50LAIT0N: RNCC: 4 | RNVC: 1
RAR3421: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-362-0028
Bail Handle

143620028
PR.311-ZB: RNCC: 3 | RNVC: 2
PR311ZB: RNCC: 3 | RNVC: 2
4P01204ZB: RNCC: 5 | RNVC: 2

20 Feb 1980

5340-14-505-7818
Loop Clamp

145057818
NO PRIMARY REF14-505-7818: RNCC: 3 | RNVC: 2
0542-15-12: RNCC: 5 | RNVC: 2

26 Mar 1998

5340-14-531-8291
Mounting Bracket

145318291
341A68-5017-01: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-14-236-9963
Retaining Strap

142369963
NO PRIMARY REF14-236-9963: RNCC: 3 | RNVC: 2
528463: RNCC: 5 | RNVC: 2
66883: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-470-7139
Runner

144707139
365A58-1101-111: RNCC: 3 | RNVC: 2
365A58-1101-AM: RNCC: 5 | RNVC: 2

29 Jun 1994

5340-14-482-8116
Mounting Bracket

144828116
3511-998-28641: RNCC: 3 | RNVC: 2

25 Jul 1996

5340-14-441-2047
Mounting Bracket

144412047
332A93-3107-20: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-420-6977
Webbing Strap

144206977
300713-0: RNCC: 3 | RNVC: 2
F300 0T 006 7801: RNCC: 6 | RNVC: 9

16 Dec 1987

5340-14-447-9321
Protection Bellows

144479321
443651: RNCC: 3 | RNVC: 2

10 Jun 1991

5340-14-418-0570
Angle Bracket

144180570
050998L01TM79: RNCC: 3 | RNVC: 2
050998L: RNCC: 5 | RNVC: 2

6 Aug 1987

5340-14-554-4875
Mounting Bracket

145544875
82385913000: RNCC: 3 | RNVC: 2

12 Jul 2007

5340-14-496-6242
Mounting Plate

144966242
5010114122: RNCC: 3 | RNVC: 2
F300 0T 021 8056: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-496-9617
Angle Bracket

144969617
3104660: RNCC: 3 | RNVC: 2
3104660: RNCC: 5 | RNVC: 2
F300 0T 022 3276: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-411-4365
Wiring Harness

144114365
A11A822110110A1: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-488-8828
Mounting Bracket

144888828
3BM01599AAAA: RNCC: 3 | RNVC: 2
3BM01599AAAA: RNCC: 5 | RNVC: 9

11 Jun 1997

5340-14-527-1877
Mounting Bracket

145271877
10561239: RNCC: 3 | RNVC: 2

10 Oct 2001

5340-14-540-8383
Angle Bracket

145408383
19225403: RNCC: 3 | RNVC: 2

23 Apr 2004

5340-14-457-6585
Webbing Strap

144576585
B1000-CAT2-LG2M: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-429-9852
Extension Handle

144299852
0202781R00: RNCC: 3 | RNVC: 2
TB100: RNCC: 5 | RNVC: 2

22 Feb 1989

5340-14-393-1868
Bumper

143931868
63721124: RNCC: 3 | RNVC: 2
372124: RNCC: 5 | RNVC: 2

12 Apr 1984

5340-14-457-5985
Pipe Hanger

144575985
PM1A593114001: RNCC: 3 | RNVC: 2
PM1A593114001: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-395-9814
Anchor Strap

143959814
0000558012: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-542-9642
Blank Panel

145429642
865002: RNCC: 3 | RNVC: 2

14 Aug 2004

5340-14-367-6115
Butt Hinge

143676115
100380451133: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-555-5873
Mounting Bracket

145555873
12471-00: RNCC: 3 | RNVC: 2

29 Nov 2007

5340-14-468-1742
Angle Bracket

144681742
78704-20-040: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-355-2370
Anchor Strap

143552370
2000070-7-23: RNCC: 3 | RNVC: 2

19 Mar 1979

5340-14-511-5956
Access Cover

145115956
78740A25-60-80: RNCC: 3 | RNVC: 2
A11A221260031: RNCC: 5 | RNVC: 2

6 Jan 1999

5340-14-427-3321
Access Cover

144273321
429590: RNCC: 3 | RNVC: 2
J00679-12-0000P020: RNCC: 5 | RNVC: 2
A0174-272: RNCC: 5 | RNVC: 2
429590-001: RNCC: 5 | RNVC: 9

13 Oct 1988

5340-14-526-4523
Pipe Hanger

145264523
RA1M704916060: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-527-9656
Mounting Bracket

145279656
T632A2312301: RNCC: 3 | RNVC: 2

5 Dec 2001

5340-14-369-9118
Retaining Strap

143699118
114083007: RNCC: 3 | RNVC: 2
114083007: RNCC: 5 | RNVC: 2

18 May 1981

5340-14-543-1623
Bridge Clamp

145431623
413911: RNCC: 3 | RNVC: 2

26 Aug 2004

5340-14-547-5053
Angle Bracket

145475053
RA1B702201171N1: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-528-5211
Cover Strip

145285211
SZ06.250.649: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-546-5744
Angle Bracket

145465744
MC2731F00: RNCC: 3 | RNVC: 2

20 Jul 2005

5340-14-505-4730
Loop Clamp

145054730
1816025128: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-536-0382
Snap Hook

145360382
1004303: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-350-4103
Vent Plug

143504103
214244: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-546-9669
Cover Strip

145469669
RA1B721325725A1N1: RNCC: 3 | RNVC: 2

12 Sep 2005

5340-14-338-6901
Leaf Spring

143386901
5000001582: RNCC: 3 | RNVC: 2
5000001582: RNCC: 5 | RNVC: 9

17 Dec 1976

5340-14-502-6872
Mounting Bracket

145026872
1014662: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-382-5023
Loop Clamp

143825023
045S03-576077W: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-507-3837
Mounting Plate

145073837
10488992: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-14-550-9174
Angle Bracket

145509174
RA1B701776193: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-537-4809
Cushioning Pad

145374809
6501BRG120003: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-553-0383
Swivel Caster

145530383
179M6653: RNCC: 3 | RNVC: 2

26 Feb 2007

5340-14-522-3182
Mounting Bracket

145223182
10459916: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-14-413-1382
Bow Handle

144131382
T0P7B2400: RNCC: 3 | RNVC: 2
054036: RNCC: 5 | RNVC: 2
TOP7B2400: RNCC: 5 | RNVC: 2

26 Nov 1986

5340-14-553-1014
Mounting Plate

145531014
47243128AA: RNCC: 3 | RNVC: 2

1 Mar 2007

5340-14-367-4582
Angle Bracket

143674582
A11A221272130A1: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-528-6030
Door Handle

145286030
10516260: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-472-2011
Cable Retractor

144722011
DHV25081: RNCC: 3 | RNVC: 2
DHV25081: RNCC: 5 | RNVC: 9

12 Oct 1994

5340-14-452-1306
Loop Clamp

144521306
16320173: RNCC: 3 | RNVC: 2
16320173: RNCC: 5 | RNVC: 9

18 Dec 1991

5340-14-452-1789
Butt Hinge

144521789
1055U2: RNCC: 3 | RNVC: 2
SYB2048: RNCC: 5 | RNVC: 2

18 Dec 1991

5340-14-447-7363
Bumper

144477363
7366: RNCC: 3 | RNVC: 2

29 May 1991

5340-14-551-3542
Angle Bracket

145513542
RA1A703926117: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-417-3665
Butt Hinge

144173665
7106ACIERCADMIE: RNCC: 3 | RNVC: 2

6 Jul 1987

5340-14-305-2784
Angle Bracket

143052784
26244375: RNCC: 3 | RNVC: 2
C244375: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-525-9132
Access Cover

145259132
413468: RNCC: 3 | RNVC: 2
413468: RNCC: 5 | RNVC: 9

20 Jun 2001

5340-14-553-5157
Mounting Plate

145535157
7420850596: RNCC: 3 | RNVC: 2

11 Apr 2007

5340-14-211-1107
Butt Hinge

142111107
21216: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-515-6023
Access Door Hinge

145156023
M782501: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-464-2642
Mounting Plate

144642642
38017476: RNCC: 3 | RNVC: 2
38017476: RNCC: 5 | RNVC: 9

28 Jul 1993

5340-14-447-3112
Loop Clamp

144473112
61113101012: RNCC: 3 | RNVC: 2
245G12: RNCC: 5 | RNVC: 2
M4ZS420D1542: RNCC: 5 | RNVC: 2

15 May 1991

5340-14-424-2599
Mounting Plate

144242599
0185700210: RNCC: 3 | RNVC: 2
89436486: RNCC: 5 | RNVC: 2

19 May 1988

5340-14-533-5014
Access Cover

145335014
39402754: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-331-7084
Bumper

143317084
3425: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-303-3278
Mending Plate

143033278
184951: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-438-5715
Mounting Bracket

144385715
TB3011404: RNCC: 3 | RNVC: 2

26 Mar 1990

5340-14-460-6999
Mounting Bracket

144606999
16558887: RNCC: 3 | RNVC: 2
16558887: RNCC: 5 | RNVC: 9

4 Feb 1993

5340-14-200-2763
Rod End Clevis

142002763
NSE833-03-04: RNCC: 3 | RNVC: 2
NSA833-03-04: RNCC: 5 | RNVC: 2

1 Jan 1962

5340-14-302-5656
Case Corner

143025656
330A22-2244-21: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-501-6277
Loop Clamp

145016277
SPGU6000.60-20SZB: RNCC: 3 | RNVC: 2
F300 0T 024 9448: RNCC: 6 | RNVC: 9

5 Nov 1997

5340-14-458-1593
Block Clamp

144581593
B105ACCM1: RNCC: 3 | RNVC: 2
B105ACCM1: RNCC: 5 | RNVC: 9
85-694-2014: RNCC: 6 | RNVC: 9

8 Oct 1992

5340-14-445-0563
Mounting Bracket

144450563
112932: RNCC: 3 | RNVC: 2

31 Jan 1991

5340-14-547-4603
Bridge Clamp

145474603
5001865017: RNCC: 3 | RNVC: 2

13 Oct 2005

5340-14-470-8924
Bumper

144708924
M421573A1427A01: RNCC: 3 | RNVC: 2

13 Jul 1994

5340-14-360-7958
Loop Clamp

143607958
003393013P: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-471-4478
Bumper

144714478
514200C75: RNCC: 3 | RNVC: 2

25 Aug 1994

5340-14-461-0875
Loop Clamp

144610875
LN400010F8REPA4: RNCC: 3 | RNVC: 2
RAB0582: RNCC: 5 | RNVC: 2

24 Feb 1993

5340-14-500-4065
Angle Bracket

145004065
14300380R: RNCC: 3 | RNVC: 2
F300 0T 024 4166: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-434-5799
Mounting Plate

144345799
557076: RNCC: 3 | RNVC: 2

22 Sep 1989

5340-14-439-6941
Mounting Bracket

144396941
16788264: RNCC: 3 | RNVC: 2
16788264: RNCC: 5 | RNVC: 9

16 May 1990

5340-14-552-2468
Mounting Bracket

145522468
1216-260-000H: RNCC: 3 | RNVC: 2

6 Dec 2006

5340-14-569-2954
Utility Resilient Mount

145692954
E1N-4001-55: RNCC: 3 | RNVC: 2

1 Sep 2011

5340-14-510-2779
Access Cover

145102779
F249-11860RS: RNCC: 3 | RNVC: 2
1560AA8018333: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-465-4876
Mounting Bracket

144654876
365A25-3130-0303: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-407-6463
Mending Plate

144076463
NO PRIMARY REF14-407-6463: RNCC: 3 | RNVC: 2
00070: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-14-505-8381
Lock Bolt

145058381
NO PRIMARY REF14-505-8381: RNCC: 3 | RNVC: 2
4500-6VKS0: RNCC: 5 | RNVC: 9

26 Mar 1998

5340-14-473-6487
Angle Bracket

144736487
332A22-1944-20: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-553-7406
Protection Bellows

145537406
AB45-70L300DA/DB45X15NOIR: RNCC: 3 | RNVC: 2

16 May 2007

5340-14-300-9521
Loop Clamp

143009521
341A91-0061-12: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-326-9752
Access Cover

143269752
010013: RNCC: 3 | RNVC: 2
10013: RNCC: 5 | RNVC: 2
1778-09-01-05: RNCC: 5 | RNVC: 2
4041: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-511-9653
Bumper

145119653
NIBS-100I: RNCC: 3 | RNVC: 2
NIBS-100I/PLAN234MSR2D-INDICE D: RNCC: 5 | RNVC: 2

1 Feb 1999

5340-14-301-4546
Eye Hook

143014546
J36-133-60GLAIT: RNCC: 2 | RNVC: 2

1 Jan 1973

5340-14-540-5129
Butt Hinge

145405129
38051368: RNCC: 3 | RNVC: 2

1 Apr 2004

5340-14-450-1378
Access Cover

144501378
853-592-941-0: RNCC: 3 | RNVC: 2
426030-01: RNCC: 5 | RNVC: 2

25 Sep 1991

5340-14-284-3047
Rod End Clevis

142843047
B35140-1D40BCL: RNCC: 3 | RNVC: 2
01902-8-960PASD: RNCC: 5 | RNVC: 2
262-10-17216-52: RNCC: 5 | RNVC: 2
85-662-1430: RNCC: 6 | RNVC: 9

1 Jan 1972

5340-14-382-5601
Angle Bracket

143825601
20191859: RNCC: 3 | RNVC: 2
20191859: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-541-6574
Mounting Plate

145416574
PL-00-25-D-25-0: RNCC: 3 | RNVC: 2
PL0025D250: RNCC: 5 | RNVC: 2
PL 00 25 D 25 0: RNCC: 5 | RNVC: 2

17 Jun 2004

5340-14-425-5359
Rod End Clevis

144255359
32816: RNCC: 3 | RNVC: 2
F300 0T 006 8150: RNCC: 6 | RNVC: 9

7 Jul 1988

5340-14-382-4952
Access Cover

143824952
16764905: RNCC: 3 | RNVC: 2
16764905: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-397-0739
Access Cover

143970739
069A20-747338P: RNCC: 3 | RNVC: 2

1 Dec 1984

5340-14-375-2920
Bumper

143752920
136-153: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-404-6542
Access Cover

144046542
613474: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-316-9073
Rod End Clevis

143169073
437412: RNCC: 3 | RNVC: 2
437412: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-511-9935
Access Cover

145119935
0054318: RNCC: 3 | RNVC: 2
42530269: RNCC: 3 | RNVC: 9

2 Feb 1999

5340-14-496-7866
Retaining Strap

144967866
5453887: RNCC: 3 | RNVC: 2
F300 0T 022 1038: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-488-7306
Access Cover

144887306
5651924K01: RNCC: 3 | RNVC: 2
1098361M00: RNCC: 5 | RNVC: 2

28 May 1997

5340-14-308-2535
Access Cover

143082535
16046482: RNCC: 3 | RNVC: 2
16046482: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-396-3006
Anchor Strap

143963006
4771520410: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-525-2625
Access Cover

145252625
06470P044020: RNCC: 3 | RNVC: 2
03906700: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-329-5336
Access Cover

143295336
0000387350: RNCC: 3 | RNVC: 2
0000387350: RNCC: 5 | RNVC: 9
387350: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-552-2936
Access Cover

145522936
9428PHC131005: RNCC: 3 | RNVC: 2

11 Dec 2006

5340-14-399-9930
Access Cover

143999930
605040: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-549-2945
Access Cover

145492945
MC3138F00: RNCC: 3 | RNVC: 2

20 Mar 2006

5340-14-501-5218
Bow Handle

145015218
0315777420: RNCC: 3 | RNVC: 2

29 Oct 1997

5340-14-250-6750
Hammock Hook

142506750
FL147159: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-443-8773
Loop Clamp

144438773
51120605034: RNCC: 3 | RNVC: 2
24FE34: RNCC: 5 | RNVC: 2

11 Dec 1990

5340-14-502-8135
Mounting Bracket

145028135
8Y8100: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-481-2588
Mounting Plate

144812588
10024793: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-14-473-7120
Lever Bracket

144737120
10282343: RNCC: 3 | RNVC: 2

9 Jan 1995

5340-14-447-3232
Bow Handle

144473232
NO PRIMARY REF14-447-3232: RNCC: 3 | RNVC: 2
48357: RNCC: 5 | RNVC: 2
38: RNCC: 5 | RNVC: 9

15 May 1991

5340-14-444-9722
Angle Bracket

144449722
12-006-000: RNCC: 3 | RNVC: 2
12-006-000: RNCC: 5 | RNVC: 9

30 Jan 1991

5340-14-503-0165
Cover Strip

145030165
332A58-1690-21: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-524-4875
Mounting Plate

145244875
234-00A67361: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-14-498-3162
Loop Clamp

144983162
91952650: RNCC: 3 | RNVC: 2
PAA73-10-010-14: RNCC: 3 | RNVC: 2
F300 0T 004 7827: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-401-3630
Angle Bracket

144013630
NO PRIMARY REF14-401-3630: RNCC: 3 | RNVC: 2
29353443: RNCC: 5 | RNVC: 9

5 Jun 1985

5340-14-479-6015
Strap Fastener Loop

144796015
11323-017-101: RNCC: 3 | RNVC: 2

24 Jan 1996

5340-14-309-4550
Angle Bracket

143094550
GSM514-001F13: RNCC: 3 | RNVC: 2
411MA267F22REP9: RNCC: 5 | RNVC: 2
A0210-004F13: RNCC: 5 | RNVC: 2
GSM514-01F13: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-533-4673
Mounting Bracket

145334673
55-700-346: RNCC: 3 | RNVC: 2
SZ55.700.346: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-338-2244
Rod End Clevis

143382244
S6265-62580-4: RNCC: 3 | RNVC: 2
00-962-9386: RNCC: 6 | RNVC: 9

6 Nov 1976

5340-14-435-9395
Mounting Bracket

144359395
20110454: RNCC: 3 | RNVC: 2
20110454: RNCC: 5 | RNVC: 9

29 Nov 1989

5340-14-424-8610
Retaining Strap

144248610
1145238: RNCC: 3 | RNVC: 2
1145238: RNCC: 5 | RNVC: 2

9 Jun 1988

5340-14-357-2919
Rod End Clevis

143572919
557: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-452-1402
Access Cover

144521402
5000743724: RNCC: 3 | RNVC: 2
89471913: RNCC: 5 | RNVC: 2

18 Dec 1991

5340-14-534-7483
Mounting Bracket

145347483
46054197: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-424-9872
Angle Bracket

144249872
5429-51: RNCC: 3 | RNVC: 2
4-013077: RNCC: 5 | RNVC: 2
5429-5100: RNCC: 5 | RNVC: 2

16 Jun 1988

5340-14-332-2692
Handwheel

143322692
NO PRIMARY REF14-332-2692: RNCC: 3 | RNVC: 2
VDPM02607: RNCC: 5 | RNVC: 2
3232-01: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-375-6780
Control Rod

143756780
GSM137-015F4REP2: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-466-3975
Filler Opening Cap

144663975
HQ702-63: RNCC: 3 | RNVC: 2

3 Nov 1993

5340-14-479-7176
Door Handle

144797176
06450-1051: RNCC: 3 | RNVC: 2
0643051009: RNCC: 5 | RNVC: 2
91737462: RNCC: 5 | RNVC: 2
643-051-009: RNCC: 5 | RNVC: 9
NLM643-051-009: RNCC: 5 | RNVC: 9

31 Jan 1996

5340-14-543-1421
Mounting Plate

145431421
4383203: RNCC: 3 | RNVC: 2

26 Aug 2004

5340-14-335-9523
Flush Catch

143359523
Z360-001A000: RNCC: 3 | RNVC: 2
Z360-001A: RNCC: 5 | RNVC: 2

24 Jul 1976

5340-14-353-6803
Arched Cushion

143536803
650-403-224-0: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-462-1590
Pipe Hanger

144621590
1XSP110ALIS: RNCC: 3 | RNVC: 2
40453837: RNCC: 5 | RNVC: 2
1-SP110ALIS: RNCC: 5 | RNVC: 2
98B18130003: RNCC: 5 | RNVC: 2

8 Apr 1993

5340-14-444-3649
Synchro Clamp

144443649
320-024-201-0: RNCC: 3 | RNVC: 2

9 Jan 1991

5340-14-302-1207
Mending Plate

143021207
A10-74-107-10-0: RNCC: 3 | RNVC: 2
A10-74-107-10-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-031-1489
Tubular Fairlead

140311489
960-053-073-0: RNCC: 3 | RNVC: 2
VDPM03035: RNCC: 5 | RNVC: 2

14 Jun 1980

5340-14-511-2446
Rod End Connector

145112446
429610: RNCC: 3 | RNVC: 2
429610-001: RNCC: 5 | RNVC: 9

9 Dec 1998

5340-14-516-3848
Loop Clamp

145163848
ST46411: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-14-450-2186
Caster Wheel

144502186
7503001: RNCC: 3 | RNVC: 2
45186213: RNCC: 5 | RNVC: 2
7503001: RNCC: 5 | RNVC: 9

25 Sep 1991

5340-14-506-9159
Mounting Bracket

145069159
204 180 019: RNCC: 3 | RNVC: 2

27 May 1998

5340-14-396-5110
Corner Brace

143965110
069A64-685999E: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-238-9773
Angle Bracket

142389773
711723: RNCC: 3 | RNVC: 9
062711723: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-546-5832
Angle Bracket

145465832
RA1A705626031: RNCC: 3 | RNVC: 2

20 Jul 2005

5340-14-249-9193
Bow Handle

142499193
T0P7A105: RNCC: 3 | RNVC: 2
TOP7A105: RNCC: 5 | RNVC: 2
A105: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-456-1530
Mounting Bracket

144561530
3511 191 32801: RNCC: 3 | RNVC: 2

18 Jun 1992

5340-14-383-3986
Retaining Strap

143833986
386394: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-471-4806
Synchro Clamp

144714806
2014909P: RNCC: 3 | RNVC: 2

31 Aug 1994

5340-14-444-6532
Loop Clamp

144446532
91PD400110: RNCC: 3 | RNVC: 2

16 Jan 1991

5340-14-338-6133
Leaf Spring

143386133
5000001589: RNCC: 3 | RNVC: 2
5000001589: RNCC: 5 | RNVC: 9

17 Dec 1976

5340-14-444-6977
Shelf Bracket

144446977
TOP7G201B: RNCC: 3 | RNVC: 2

16 Jan 1991

5340-14-468-7760
Elastic Strap

144687760
1905237-DIA20LONG.1377: RNCC: 3 | RNVC: 2
006132: RNCC: 3 | RNVC: 2
RAB2955: RNCC: 5 | RNVC: 2

21 Mar 1994

5340-14-436-8495
Detent Plunger

144368495
DA2C297540A2: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-365-5616
Angle Bracket

143655616
A21A619001121: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-482-6126
Mounting Bracket

144826126
39059691: RNCC: 3 | RNVC: 2

18 Jul 1996

5340-14-505-0218
Mounting Plate

145050218
5010120506: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-375-8879
Loop Clamp

143758879
5000011187: RNCC: 3 | RNVC: 2
5000011187: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-543-2044
Mounting Bracket

145432044
X25988: RNCC: 3 | RNVC: 2

31 Aug 2004

5340-14-351-6547
Retaining Strap

143516547
CR2159: RNCC: 3 | RNVC: 9

12 Sep 1978

5340-14-321-6727
Mounting Plate

143216727
0235517020: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-466-2941
Mounting Plate

144662941
286137: RNCC: 3 | RNVC: 2

3 Nov 1993

5340-14-455-9621
Angle Bracket

144559621
PM1A761820220: RNCC: 3 | RNVC: 2
PM1A761820220: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-515-5326
Mounting Plate

145155326
150G4301: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-419-1085
Mounting Plate

144191085
8307212: RNCC: 3 | RNVC: 2
8307212: RNCC: 5 | RNVC: 9

30 Sep 1987

5340-14-554-9425
Loop Clamp

145549425
78651DH16AG: RNCC: 1 | RNVC: 2
78651DH16AG: RNCC: 3 | RNVC: 2

11 Sep 2007

5340-14-472-9702
Block Clamp

144729702
38512206: RNCC: 3 | RNVC: 2
38512206: RNCC: 5 | RNVC: 9

23 Nov 1994

5340-14-548-6427
Pipe Hanger

145486427
RA1A702416111: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-539-6029
Access Cover

145396029
730010S000-22A: RNCC: 3 | RNVC: 2

23 Jan 2004

5340-14-264-7866
Rod End Connector

142647866
262-10-94180-01: RNCC: 3 | RNVC: 2
NA57-102: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-384-3183
Loop Clamp

143843183
92831141: RNCC: 3 | RNVC: 2
9-28GE14: RNCC: 5 | RNVC: 2

4 May 1983

5340-14-503-6883
Track Stop

145036883
121S83-563-00-2: RNCC: 3 | RNVC: 2

26 Jan 1998

5340-14-315-1167
Flush Catch Claw

143151167
301C0-0096REP33: RNCC: 3 | RNVC: 2
301C0-096REP33: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-425-3536
Loop Clamp

144253536
50011-1-14: RNCC: 3 | RNVC: 2
NSA935807-14: RNCC: 5 | RNVC: 2
50011-1-14: RNCC: 5 | RNVC: 9

30 Jun 1988

5340-14-553-2153
Metal Grille

145532153
PL/05/24/D/09: RNCC: 3 | RNVC: 2

14 Mar 2007

5340-14-390-2131
Loop Clamp

143902131
B7330-2: RNCC: 3 | RNVC: 2
B7330: RNCC: 5 | RNVC: 2

26 Jan 1984

5340-14-539-3188
Pawl Fastener

145393188
1000-U714-01: RNCC: 3 | RNVC: 2

22 Dec 2003

5340-14-413-1555
Access Cover

144131555
23136002-3: RNCC: 3 | RNVC: 2
23136002: RNCC: 5 | RNVC: 2

26 Nov 1986

5340-14-466-6564
Rod End Clevis

144666564
264-1M313P271: RNCC: 3 | RNVC: 9
PA264-1M313P271: RNCC: 5 | RNVC: 9

22 Nov 1993

5340-14-536-1731
Mounting Plate

145361731
MAT214-1620F2: RNCC: 3 | RNVC: 2
MAT214-1600F1: RNCC: 5 | RNVC: 2
MAT214-1567F1: RNCC: 5 | RNVC: 2

10 Jul 2003

5340-14-293-6037
Loop Clamp

142936037
51359005025: RNCC: 3 | RNVC: 2
21K25: RNCC: 5 | RNVC: 2
9562811090: RNCC: 5 | RNVC: 2
NSA55222-25CA: RNCC: 5 | RNVC: 2
55222-25CA: RNCC: 5 | RNVC: 9
55222-25CA: RNCC: 5 | RNVC: 9
552222500: RNCC: 5 | RNVC: 9
55222-25CA: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-502-8003
Detent Plunger

145028003
8C8522: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-555-4141
Loop Clamp

145554141
78651DH9BF: RNCC: 1 | RNVC: 2
78651DH9BF: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-14-555-2091
Mounting Bracket

145552091
11 109 004: RNCC: 3 | RNVC: 2

10 Oct 2007

5340-14-431-1982
Mounting Plate

144311982
X554260: RNCC: 3 | RNVC: 2

11 Apr 1989

5340-14-555-4247
Mounting Bracket

145554247
19227111: RNCC: 3 | RNVC: 2

8 Nov 2007

5340-14-365-9196
Synchro Clamp

143659196
S2153DB: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-14-475-0119
Mounting Bracket

144750119
1094697Q00: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-14-322-4346
Angle Bracket

143224346
438508: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-326-9386
Flush Catch Claw

143269386
197473: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-372-1170
Bridge Clamp

143721170
T182: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-545-4572
Angle Bracket

145454572
RA1M706343132: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-286-4353
Loop Clamp

142864353
205358: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-523-0676
Spring Holder

145230676
1050 751 R 00: RNCC: 3 | RNVC: 2

20 Dec 2000

5340-14-540-1620
Loop Clamp

145401620
FIX COM149: RNCC: 3 | RNVC: 2

11 Mar 2004

5340-14-433-4799
Butt Hinge

144334799
022488X: RNCC: 3 | RNVC: 2

1 Aug 1989

5340-14-530-0393
Mounting Bracket

145300393
GA66843: RNCC: 3 | RNVC: 2

30 Apr 2002

5340-14-476-0103
Webbing Strap

144760103
A63455: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-314-5166
Loop Clamp

143145166
9408501: RNCC: 3 | RNVC: 9

1 Jan 1974

5340-14-303-7921
Pipe Hanger

143037921
10363: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-512-8701
Mounting Plate

145128701
477740: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-040-4097
Bumper

140404097
032A040: RNCC: 3 | RNVC: 2
032A040: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-529-2800
Mounting Plate

145292800
1033000: RNCC: 3 | RNVC: 2

20 Mar 2002

5340-14-550-9172
Angle Bracket

145509172
RA1B701776173: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-369-8263
Angle Bracket

143698263
12509101: RNCC: 3 | RNVC: 2
12509101: RNCC: 3 | RNVC: 9

17 Apr 1981

5340-14-528-9450
Loop Clamp

145289450
EN4114F24NH0: RNCC: 2 | RNVC: 2

27 Feb 2002

5340-14-484-4141
Block Clamp

144844141
LB31111551-001: RNCC: 3 | RNVC: 2
E195000-001: RNCC: 5 | RNVC: 2

14 Nov 1996

5340-14-520-9189
Loop Clamp

145209189
ASNA0021-31S12: RNCC: 1 | RNVC: 2
315301202: RNCC: 3 | RNVC: 2
31S12: RNCC: 5 | RNVC: 2
N7141382562: RNCC: 5 | RNVC: 2
A0021-31S12: RNCC: 5 | RNVC: 2
513153050121: RNCC: 5 | RNVC: 9

21 Jun 2000

5340-14-381-2900
Rod End Clevis

143812900
CN155AUF1-061339: RNCC: 3 | RNVC: 2
BAZ9138: RNCC: 5 | RNVC: 2
061339: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-395-5465
Handle Grip

143955465
5-1881B43152-1390: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-486-2493
Angle Bracket

144862493
282-1-G-106: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-313-6975
Mounting Bracket

143136975
0064760740: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-310-2382
Loop Clamp

143102382
GSM1595C0LLIER2: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-553-1606
Mounting Plate

145531606
0177160020: RNCC: 3 | RNVC: 2

8 Mar 2007

5340-14-541-2406
Plug Button

145412406
1224096: RNCC: 3 | RNVC: 2

19 May 2004

5340-14-366-4113
Loop Clamp

143664113
51213105015: RNCC: 3 | RNVC: 2
20G15: RNCC: 5 | RNVC: 2

20 Nov 1980

5340-14-382-5618
Angle Bracket

143825618
16497199: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-501-6059
Access Cover

145016059
45593510: RNCC: 3 | RNVC: 2
45593510: RNCC: 5 | RNVC: 9
F300 0T 025 0862: RNCC: 6 | RNVC: 9

5 Nov 1997

5340-14-549-9675
Mounting Plate

145499675
2092598: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-540-7600
Access Cover

145407600
HR5304A: RNCC: 3 | RNVC: 9

23 Apr 2004

5340-14-430-7172
Block Clamp

144307172
PM1A743140210: RNCC: 3 | RNVC: 2
PM1A743140210: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-478-3229
Access Cover

144783229
45431997: RNCC: 3 | RNVC: 2
45431997: RNCC: 3 | RNVC: 9

25 Oct 1995

5340-14-547-1747
Access Cover

145471747
5010631526: RNCC: 3 | RNVC: 2

30 Sep 2005

5340-14-266-0911
Access Cover

142660911
40319A2: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-518-9232
Retaining Strap

145189232
TPS1B2105C: RNCC: 3 | RNVC: 2

29 Feb 2000

5340-14-379-4189
Retaining Strap

143794189
061223118: RNCC: 3 | RNVC: 9

1 Oct 1982

5340-14-550-8431
Protection Bellows

145508431
FTAA34A05: RNCC: 3 | RNVC: 2

20 Jul 2006

5340-14-513-1081
Pipe Hanger

145131081
T5674550: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-14-359-0682
Angle Bracket

143590682
A11A221178020: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-14-375-1822
Retaining Strap

143751822
16047318: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-456-5308
Fusible Plug

144565308
3441036: RNCC: 3 | RNVC: 2
3441036: RNCC: 5 | RNVC: 2

8 Jul 1992

5340-14-517-8824
Angle Bracket

145178824
446002180001: RNCC: 3 | RNVC: 2

17 Jan 2000

5340-14-511-7504
Swivel Caster

145117504
104159LTB: RNCC: 3 | RNVC: 2

15 Jan 1999

5340-14-505-6772
Mounting Bracket

145056772
E24001000002: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-525-6871
Bow Handle

145256871
20 242 160 6290: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-429-6330
Retaining Strap

144296330
ETD014055036020: RNCC: 3 | RNVC: 2

6 Feb 1989

5340-14-507-6859
Mounting Bracket

145076859
25670874: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-14-489-5333
Mounting Plate

144895333
20233494: RNCC: 3 | RNVC: 2

30 Jul 1997

5340-14-489-7476
Leakproof Seal Plug

144897476
F300 0T 003 7910: RNCC: 3 | RNVC: 2
1091: RNCC: 5 | RNVC: 9

13 Aug 1997

5340-14-216-3037
Mending Plate

142163037
2228-36-14-10-20: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-472-8738
Cover Strip

144728738
332A25-1282-21: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-504-9612
Mounting Plate

145049612
IF-183-530: RNCC: 3 | RNVC: 9
IF183-530: RNCC: 5 | RNVC: 9

11 Mar 1998

5340-14-379-7072
Runner

143797072
7371663115: RNCC: 3 | RNVC: 2
7371663115: RNCC: 3 | RNVC: 2
9213-15: RNCC: 5 | RNVC: 2

20 Oct 1982

5340-14-512-5472
Section Block Clamp

145125472
F704-74-02: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-531-2336
Access Cover

145312336
955120-211DGJ: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-307-1820
Mending Plate

143071820
0210570047: RNCC: 3 | RNVC: 2
0210570047: RNCC: 5 | RNVC: 2
21-57-00-47: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-370-0567
Anchor Strap

143700567
B13261-12: RNCC: 3 | RNVC: 2
B13261-12: RNCC: 3 | RNVC: 2
301796: RNCC: 5 | RNVC: 2

18 May 1981

5340-14-473-9675
Mounting Bracket

144739675
F7987 5236-89: RNCC: 3 | RNVC: 9

18 Jan 1995

5340-14-332-1090
Access Cover

143321090
461-10729-000: RNCC: 3 | RNVC: 2
461-10729-000: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-446-1695
Retaining Strap

144461695
2854-115: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-299-3785
Support Hook

142993785
424-31038-000: RNCC: 3 | RNVC: 2
424-31038-000: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-414-6854
Rigid Caster

144146854
NO PRIMARY REF14-414-6854: RNCC: 3 | RNVC: 2
179A9021: RNCC: 5 | RNVC: 2

25 Feb 1987

5340-14-531-9551
Mounting Plate

145319551
MAT291-0584F7: RNCC: 3 | RNVC: 2

2 Oct 2002

5340-14-353-0953
Access Cover

143530953
NO PRIMARY REF14-353-0953: RNCC: 3 | RNVC: 2
1619011: RNCC: 5 | RNVC: 9

8 Dec 1978

5340-14-389-4835
Loop Clamp

143894835
365A62-1579-20: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-509-8111
Access Cover

145098111
1600-100-216-02: RNCC: 3 | RNVC: 2
1560AA0012162: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-301-4331
Bow Handle

143014331
14-104-220-13: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-236-0974
Loop Clamp

142360974
160-61529-02: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-460-5566
Webbing Strap

144605566
IF032-507: RNCC: 3 | RNVC: 9
063533J: RNCC: 5 | RNVC: 2

29 Jan 1993

5340-14-440-6725
Retaining Bail

144406725
332A58-1628-20: RNCC: 3 | RNVC: 2

18 Jul 1990

5340-14-398-9082
Loop Clamp

143989082
NO PRIMARY REF14-398-9082: RNCC: 3 | RNVC: 2
300601061: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-440-3233
Mounting Bracket

144403233
332A63-1671-06: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-507-5198
Access Cover

145075198
332A41-0045-21: RNCC: 3 | RNVC: 2

16 Jul 1998

5340-14-449-3944
Cover Strip

144493944
MY20552-3059: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-297-0644
Rod End Clevis

142970644
GA1-51642: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-341-1870
Access Cover

143411870
M3B702-40-02: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-525-5955
Mounting Bracket

145255955
10 146 373 1320: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-237-9640
Retaining Strap

142379640
0000249375: RNCC: 3 | RNVC: 2
249375: RNCC: 5 | RNVC: 9
0000249375: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-549-5499
Door Holder

145495499
CLAR1PD220222: RNCC: 3 | RNVC: 2

13 Apr 2006

5340-14-475-3659
Bumper

144753659
ACF1862067: RNCC: 3 | RNVC: 2

31 Mar 1995

5340-14-316-9136
Retaining Strap

143169136
000MA427F30BISREPC: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-442-4074
Mounting Bracket

144424074
IF014740: RNCC: 3 | RNVC: 2
IF014741: RNCC: 5 | RNVC: 9

16 Oct 1990

5340-14-540-9669
Detent Plunger

145409669
MB5046F00: RNCC: 3 | RNVC: 2

5 May 2004

5340-14-455-8133
Dashpot

144558133
3M61R: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-573-8382
Utility Resilient Mount

145738382
TP560599: RNCC: 3 | RNVC: 2

14 Nov 2012

5340-14-472-8213
Clamping Catch

144728213
06080007: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-320-3060
Mounting Bracket

143203060
0064771810: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-413-4986
Angle Bracket

144134986
121133: RNCC: 3 | RNVC: 2

17 Dec 1986

5340-14-356-3331
Angle Bracket

143563331
A11A221160431: RNCC: 3 | RNVC: 2

25 Apr 1979

5340-14-402-1041
Rod End Connector

144021041
400746: RNCC: 3 | RNVC: 2
BGE400746: RNCC: 5 | RNVC: 2

26 Jun 1985

5340-14-325-9145
Key Blank

143259145
25511B16X28XC38: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-457-6240
Pipe Hanger

144576240
PM1A753214002: RNCC: 3 | RNVC: 2
PM1A753214002: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-523-2910
Pipe Hanger

145232910
RA1M702416220A1: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-545-7322
Mounting Bracket

145457322
46249281: RNCC: 3 | RNVC: 2

3 May 2005

5340-14-523-2565
Pipe Hanger

145232565
RA1M703576111N1: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-538-6417
Lock Bolt

145386417
NGM0010060106276: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-546-2090
Mounting Bracket

145462090
RA1A703936225: RNCC: 3 | RNVC: 2

15 Jun 2005

5340-14-283-6713
Loop Clamp

142836713
53957-7: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-497-5256
Bumper

144975256
1402015: RNCC: 3 | RNVC: 2
F300 0T 023 3036: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-502-8315
Mounting Bracket

145028315
9R2827: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-212-8560
Retaining Strap

142128560
0000673493: RNCC: 3 | RNVC: 2
0000673493: RNCC: 5 | RNVC: 9
673493: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-284-9222
Angle Bracket

142849222
3-8193: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-502-7926
Mounting Bracket

145027926
7T4568: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-503-0968
Mounting Plate

145030968
011020100600: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-374-6052
Mending Plate

143746052
0035453334: RNCC: 3 | RNVC: 2
0035453334: RNCC: 5 | RNVC: 9
35453334: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-500-8193
Section Block Clamp

145008193
E64009998048: RNCC: 3 | RNVC: 2
F300 0T 024 8395: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-523-1898
Loop Clamp

145231898
11313105016: RNCC: 3 | RNVC: 2
91769792: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-437-9397
Mounting Plate

144379397
100985: RNCC: 3 | RNVC: 2
C64199: RNCC: 5 | RNVC: 2

28 Feb 1990

5340-14-436-0852
Mounting Plate

144360852
1005388D00: RNCC: 3 | RNVC: 2

4 Dec 1989

5340-14-551-5025
Angle Bracket

145515025
RA1M702504181: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-482-8054
Mounting Plate

144828054
10023661: RNCC: 3 | RNVC: 2

25 Jul 1996

5340-14-502-2147
Mounting Bracket

145022147
0390750720: RNCC: 3 | RNVC: 2

26 Nov 1997

5340-14-482-0157
Mounting Plate

144820157
3266-38: RNCC: 3 | RNVC: 2

13 Jun 1996

5340-14-474-8923
Mounting Plate

144748923
10026218: RNCC: 3 | RNVC: 2

8 Mar 1995

5340-14-369-5862
Retaining Strap

143695862
494491: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-550-4948
Lock-Release Lever

145504948
9428PHC162100: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-404-5605
Rim Lock Set

144045605
A12460: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-552-2314
Cover Strip

145522314
SZ00.251.196: RNCC: 3 | RNVC: 2

5 Dec 2006

5340-14-543-9754
Mounting Plate

145439754
10670755000: RNCC: 3 | RNVC: 2

19 Dec 2004

5340-14-439-2155
Access Cover

144392155
29739602: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-537-5200
Access Cover

145375200
14908: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-428-5348
Access Cover

144285348
4061901100: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-273-0873
Loop Clamp

142730873
H2V: RNCC: 3 | RNVC: 2
91222792: RNCC: 5 | RNVC: 2
99008505: RNCC: 5 | RNVC: 2
99008505: RNCC: 5 | RNVC: 2
8071: RNCC: 5 | RNVC: 2
11-68: RNCC: 5 | RNVC: 9
100SP27-0020: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-454-4398
Stand Base

144544398
TB30 60 408 001: RNCC: 3 | RNVC: 2
TB30-60408-001: RNCC: 5 | RNVC: 2

2 Apr 1992

5340-14-389-5319
Mounting Bracket

143895319
365A81-0056-20: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-413-9908
Runner

144139908
13-201-02: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-386-1372
Retaining Strap

143861372
360A32-1245-20: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-338-4375
Loop Clamp

143384375
321A25-0008-47: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-465-1500
Mounting Plate

144651500
365A24-1274-20: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-424-9795
Mounting Plate

144249795
D2032890-01: RNCC: 3 | RNVC: 2
D2032890-01: RNCC: 5 | RNVC: 9

16 Jun 1988

5340-14-465-7949
Control Rod

144657949
7502-0422: RNCC: 3 | RNVC: 2

14 Oct 1993

5340-14-473-0819
Loop Clamp

144730819
803272-08: RNCC: 3 | RNVC: 2

7 Dec 1994

5340-14-537-0809
Loop Clamp

145370809
55222-12CA: RNCC: 1 | RNVC: 2
51359005012: RNCC: 3 | RNVC: 2
21K12: RNCC: 5 | RNVC: 2

24 Sep 2003

5340-14-452-2738
Bow Handle

144522738
E03-804: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-364-1236
Angle Bracket

143641236
461-10360-000: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-320-8487
Loop Clamp

143208487
M3E700-20-905: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-498-3698
Loop Clamp

144983698
S1010-711-330: RNCC: 3 | RNVC: 2
BCLUL330: RNCC: 5 | RNVC: 2
91958320: RNCC: 5 | RNVC: 9
F300 0T 004 9639: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-406-9813
Handwheel

144069813
GSM137-029: RNCC: 3 | RNVC: 2

22 Jan 1986

5340-14-459-7357
Loop Holder

144597357
LN321022REP17LAG3-L32X32X3: RNCC: 3 | RNVC: 2
RAB0204: RNCC: 5 | RNVC: 2

15 Dec 1992

5340-14-416-1770
Bumper

144161770
M429-630104: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-388-8950
Butt Hinge

143888950
365A25-3066-04: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-549-3700
Mounting Plate

145493700
332A230569-22: RNCC: 3 | RNVC: 2

27 Mar 2006

5340-14-256-5696
Bumper

142565696
701-465: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-449-8350
Webbing Strap

144498350
993-07-08: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-14-421-7458
Pipe Hanger

144217458
045U01-645385Q: RNCC: 3 | RNVC: 2
89405532: RNCC: 5 | RNVC: 2
0645385Q00: RNCC: 5 | RNVC: 2

27 Jan 1988

5340-14-531-2575
Loop Clamp

145312575
51313110025: RNCC: 3 | RNVC: 2

6 Aug 2002

5340-14-517-1518
Mounting Plate

145171518
10494955: RNCC: 3 | RNVC: 2

10 Nov 1999

5340-14-488-4105
Bridge Clamp

144884105
36993-4: RNCC: 3 | RNVC: 2
36551123: RNCC: 3 | RNVC: 2

7 May 1997

5340-14-544-2757
Loop Clamp

145442757
0 363 01 025 0: RNCC: 3 | RNVC: 2

14 Jan 2005

5340-14-479-2159
Metal Grille

144792159
23627587-8: RNCC: 3 | RNVC: 2

19 Dec 1995

5340-14-545-1017
Mounting Bracket

145451017
5010607428: RNCC: 3 | RNVC: 2

17 Mar 2005

5340-14-555-8654
Runner

145558654
82410686000: RNCC: 3 | RNVC: 2

19 Dec 2007

5340-14-555-9912
Mounting Bracket

145559912
10613019: RNCC: 3 | RNVC: 2

17 Jan 2008

5340-14-555-9904
Mounting Bracket

145559904
10593496: RNCC: 3 | RNVC: 2

17 Jan 2008

5340-14-445-6132
Loop Holder

144456132
NO PRIMARY REF14-445-6132: RNCC: 3 | RNVC: 2
164 2960: RNCC: 5 | RNVC: 2

20 Feb 1991

5340-14-312-6370
Mounting Bracket

143126370
319A57-10-313: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-512-5388
Bumper

145125388
F220-63813: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-450-1355
Mounting Bracket

144501355
320-576-801-0: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-533-8602
Rim Lock

145338602
SZ10.135.00: RNCC: 3 | RNVC: 2
10-135-00: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-486-0518
Mounting Bracket

144860518
350A23-1053-44: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-14-475-0224
Anchor Strap

144750224
27102414-6: RNCC: 3 | RNVC: 2
477265R: RNCC: 5 | RNVC: 2
AMU477265R: RNCC: 5 | RNVC: 2

16 Mar 1995

5340-14-553-5750
Angle Bracket

145535750
BBCE-07H6000: RNCC: 3 | RNVC: 2

18 Apr 2007

5340-14-465-6153
Pad Eye

144656153
052-704-00-01: RNCC: 3 | RNVC: 2

5 Oct 1993

5340-14-508-3279
Webbing Strap

145083279
V420602-LG5M-1ANNEAU: RNCC: 3 | RNVC: 2

4 Sep 1998

5340-14-473-8322
Bumper

144738322
332A58-4681-20: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-340-2463
Retaining Strap

143402463
PLU20B14: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-532-6573
Mounting Plate

145326573
8025290R01: RNCC: 3 | RNVC: 2

27 Nov 2002

5340-14-537-7326
Mounting Bracket

145377326
PCS223B: RNCC: 3 | RNVC: 2

19 Nov 2003

5340-14-402-6303
Mounting Plate

144026303
400023: RNCC: 3 | RNVC: 2
BGE400023: RNCC: 5 | RNVC: 2

19 Jul 1985

5340-14-502-5989
Angle Bracket

145025989
5010037357: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-549-0611
Angle Bracket

145490611
RA1M231026139: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-485-2022
Angle Bracket

144852022
T2239AA14: RNCC: 3 | RNVC: 2
T2239AA14: RNCC: 5 | RNVC: 9

10 Jan 1997

5340-14-533-7961
Mounting Bracket

145337961
F1262323: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-514-1808
Mounting Plate

145141808
15271-7426-0: RNCC: 3 | RNVC: 2

28 Apr 1999

5340-14-304-6473
Mortise Lock Set

143046473
5220TC70DCHR0ME: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-339-2937
Webbing Strap

143392937
GC27-4: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-306-4598
Plug Button

143064598
DM3835-2: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-224-8852
Bumper

142248852
GSM1674A17-5: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-297-4356
Loop Clamp

142974356
NO PRIMARY REF14-297-4356: RNCC: 3 | RNVC: 2
17-600-48: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-463-9063
Loop Clamp

144639063
F0143-009F18TAB1DE17,15: RNCC: 3 | RNVC: 2
MAT169-0007F5: RNCC: 3 | RNVC: 2
F0143-009F18TAB1DE20: RNCC: 5 | RNVC: 2

5 Jul 1993

5340-14-522-9080
Mounting Plate

145229080
500-75-00-18: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-14-547-5500
Bow Handle

145475500
1095-12: RNCC: 3 | RNVC: 2
1095-12-166: RNCC: 5 | RNVC: 9

15 Oct 2005

5340-14-405-0483
Surface Bolt

144050483
NO PRIMARY REF14-405-0483: RNCC: 3 | RNVC: 2
1587-400: RNCC: 5 | RNVC: 9

20 Nov 1985

5340-14-495-5765
Mending Plate

144955765
P70227-87: RNCC: 3 | RNVC: 2
F300 0T 019 5014: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-464-1478
Mounting Bracket

144641478
634004724: RNCC: 3 | RNVC: 2
6340-04724: RNCC: 5 | RNVC: 2

15 Jul 1993

5340-14-533-1241
Mounting Plate

145331241
459-11556-000: RNCC: 3 | RNVC: 2

23 Jan 2003

5340-14-490-2875
Mounting Bracket

144902875
J05085-04-0400P003: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-258-2982
Caster Frame

142582982
150230: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-503-7185
Mounting Bracket

145037185
01247000: RNCC: 3 | RNVC: 2

28 Jan 1998

5340-14-404-6612
Retaining Strap

144046612
5172025000: RNCC: 3 | RNVC: 2
720250: RNCC: 5 | RNVC: 9

20 Nov 1985

5340-14-483-1154
Mounting Bracket

144831154
ALZ126551413020: RNCC: 3 | RNVC: 2

8 Aug 1996

5340-14-461-0197
Section Block Clamp

144610197
16787438: RNCC: 3 | RNVC: 2
16787438: RNCC: 5 | RNVC: 9

17 Feb 1993

5340-14-437-6367
Mounting Plate

144376367
PM1A126700003: RNCC: 3 | RNVC: 2
PM1A126700003: RNCC: 5 | RNVC: 2

7 Feb 1990

5340-14-387-6515
Runner

143876515
13762: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-14-441-7664
Loop Clamp

144417664
007730080P: RNCC: 3 | RNVC: 2

18 Sep 1990

5340-14-440-4044
Cover Strip

144404044
DA2N260032100: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-224-8638
Mending Plate

142248638
044BBC3APL2REP7: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-551-3527
Angle Bracket

145513527
RA1B702606055: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-512-2928
Bridge Clamp

145122928
3BM03527AAAA: RNCC: 3 | RNVC: 2
3BM03527AAAA: RNCC: 5 | RNVC: 2

10 Feb 1999

5340-14-544-3358
Mounting Bracket

145443358
82081546000: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-14-472-7134
Detent Plunger

144727134
4282421: RNCC: 3 | RNVC: 2
4282421: RNCC: 5 | RNVC: 9

9 Nov 1994

5340-14-546-9659
Butt Hinge

145469659
RA1M703117553: RNCC: 3 | RNVC: 2

12 Sep 2005

5340-14-520-3114
Metal Grille

145203114
23194668-8: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-549-8220
Bow Handle

145498220
2092687: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-357-9298
Retaining Strap

143579298
TH20A1306: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-14-452-1417
Door Handle

144521417
133050: RNCC: 3 | RNVC: 9
91605675: RNCC: 5 | RNVC: 2

18 Dec 1991

5340-14-531-1306
Mounting Bracket

145311306
10633360: RNCC: 3 | RNVC: 2

24 Jul 2002

5340-14-341-6817
Webbing Strap

143416817
006SP10-02: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-420-4654
Webbing Strap

144204654
06229977: RNCC: 3 | RNVC: 2

10 Dec 1987

5340-14-479-7992
Mounting Plate

144797992
11095T310002: RNCC: 3 | RNVC: 2

7 Feb 1996

5340-14-532-9355
Stand Base

145329355
6842340000: RNCC: 3 | RNVC: 2

14 Jan 2003

5340-14-350-4458
Mending Plate

143504458
205690: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-501-4218
Block Clamp

145014218
LB10111556076: RNCC: 3 | RNVC: 2
10111556076: RNCC: 5 | RNVC: 2

29 Oct 1997

5340-14-338-6902
Leaf Spring

143386902
5000001583: RNCC: 3 | RNVC: 2
5000001583: RNCC: 5 | RNVC: 9

17 Dec 1976

5340-14-360-1618
Angle Bracket

143601618
A11A221372010: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-14-473-8183
Mounting Plate

144738183
332A25-1344-20: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-391-0608
Bridge Clamp

143910608
NO PRIMARY REF14-391-0608: RNCC: 3 | RNVC: 2
D20-21802: RNCC: 5 | RNVC: 9

1 Mar 1984

5340-14-396-1609
Access Cover

143961609
NO PRIMARY REF14-396-1609: RNCC: 3 | RNVC: 2
P4H018887-00: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-290-2937
Lock-Release Lever

142902937
330A75-7164-00: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-367-9893
Butt Hinge

143679893
TRFAB108-01-72: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-517-5072
Mounting Plate

145175072
9040-300-027B: RNCC: 3 | RNVC: 2

3 Jan 2000

5340-14-205-0029
Retaining Strap

142050029
2228-36-25-10-16: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-458-5403
Swivel Caster

144585403
1718B29-16: RNCC: 3 | RNVC: 2
618926R: RNCC: 3 | RNVC: 2

23 Oct 1992

5340-14-324-4040
Mounting Bracket

143244040
A2210101: RNCC: 3 | RNVC: 2
A221-01: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-472-8815
Butt Hinge

144728815
332A58-0055-100: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-573-2360
Coating Plate

145732360
332A61-4630-20: RNCC: 3 | RNVC: 2
332A61463020: RNCC: 5 | RNVC: 2

25 Sep 2012

5340-14-465-2983
Mounting Plate

144652983
365A81-0271-01: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-549-5031
Runner

145495031
MC201-215275-30: RNCC: 3 | RNVC: 2

11 Apr 2006

5340-14-257-2637
Synchro Clamp

142572637
GIR2222-84-123: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-444-6978
Access Cover

144446978
T20-13R205: RNCC: 3 | RNVC: 2

16 Jan 1991

5340-14-536-9744
Utility Access Door

145369744
231045-020: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-14-476-3830
Mounting Plate

144763830
S83-7Z1: RNCC: 3 | RNVC: 2

7 Jun 1995

5340-14-436-1762
Loop Clamp

144361762
NH1005558-10: RNCC: 3 | RNVC: 2
NH1005558-10: RNCC: 5 | RNVC: 9

6 Dec 1989

5340-14-465-7724
Bow Handle

144657724
19-7-3409: RNCC: 3 | RNVC: 2
Z00.N7697673409: RNCC: 5 | RNVC: 2

14 Oct 1993

5340-14-460-7636
Rod End Clevis

144607636
10X20CL6-8: RNCC: 3 | RNVC: 2
302124210: RNCC: 5 | RNVC: 9

8 Feb 1993

5340-14-304-3442
T Plate

143043442
330A21-2722-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-569-5759
Coating Plate

145695759
96.16.270.02: RNCC: 3 | RNVC: 2

29 Sep 2011

5340-14-444-3049
Mounting Plate

144443049
123401152: RNCC: 3 | RNVC: 9

4 Jan 1991

5340-14-411-0581
Surface Bolt

144110581
ACF1305024: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-512-3018
Mounting Bracket

145123018
2020350F: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-14-526-4377
Cover Strip

145264377
RA1M228770251A3: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-541-9221
Mounting Plate

145419221
61025869AA00: RNCC: 3 | RNVC: 2

2 Jul 2004

5340-14-527-2396
Mounting Plate

145272396
TS84276: RNCC: 3 | RNVC: 2

17 Oct 2001

5340-14-455-9318
Angle Bracket

144559318
PM1A727212009: RNCC: 3 | RNVC: 2
PM1A727212009: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-407-5109
Retaining Strap

144075109
154719: RNCC: 3 | RNVC: 2

27 Feb 1986

5340-14-424-9520
Runner

144249520
16827: RNCC: 3 | RNVC: 2

15 Jun 1988

5340-14-502-5966
Loop Clamp

145025966
5005005055: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-542-2998
Mounting Bracket

145422998
970798408: RNCC: 3 | RNVC: 2
970798408: RNCC: 5 | RNVC: 9

8 Jul 2004

Load More Results