What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 105 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 105 of 446

5340-14-349-7940
Angle Bracket

143497940
128103: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-444-9306
Mounting Bracket

144449306
574382: RNCC: 3 | RNVC: 2
353 90 30 174 11: RNCC: 5 | RNVC: 2

29 Jan 1991

5340-14-552-8145
Stand Base

145528145
614713: RNCC: 3 | RNVC: 2

5 Feb 2007

5340-14-448-6533
Mounting Plate

144486533
401 081: RNCC: 3 | RNVC: 2
16849133: RNCC: 5 | RNVC: 2
91713577: RNCC: 5 | RNVC: 2

4 Jul 1991

5340-14-512-5715
Mounting Plate

145125715
38427494: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-546-3733
Mounting Bracket

145463733
5010248227: RNCC: 3 | RNVC: 2

28 Jun 2005

5340-14-517-5462
Mounting Plate

145175462
207262: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-446-8787
Protection Bellows

144468787
81465022: RNCC: 3 | RNVC: 2

17 Apr 1991

5340-14-423-3694
Retaining Strap

144233694
160G742091: RNCC: 3 | RNVC: 2

14 Apr 1988

5340-14-392-9896
Butt Hinge

143929896
0022311040: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-14-494-2057
Mounting Plate

144942057
29365221: RNCC: 3 | RNVC: 2
29365221: RNCC: 3 | RNVC: 9
F300 0T 016 1254: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-444-7536
Retaining Strap

144447536
123604106: RNCC: 3 | RNVC: 9

21 Jan 1991

5340-14-514-1245
Mounting Plate

145141245
101162941540: RNCC: 3 | RNVC: 2

27 Apr 1999

5340-14-492-5430
Mounting Plate

144925430
5000917877: RNCC: 3 | RNVC: 2
F300 0T 007 9242: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-374-6150
Angle Bracket

143746150
5000535808: RNCC: 3 | RNVC: 2
5000535808: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-400-0007
Mounting Plate

144000007
606657: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-360-3310
Webbing Strap

143603310
5000501159: RNCC: 3 | RNVC: 2
5000501159: RNCC: 5 | RNVC: 9

23 Nov 1979

5340-14-459-8585
Mounting Plate

144598585
P82942: RNCC: 3 | RNVC: 2

17 Dec 1992

5340-14-488-4886
Mending Plate

144884886
31762555: RNCC: 3 | RNVC: 9

14 May 1997

5340-14-379-7365
Angle Bracket

143797365
2206-332C461: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-549-0571
Pipe Hanger

145490571
RA1M701772161N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-361-2261
Handle Grip

143612261
51921: RNCC: 3 | RNVC: 2
600BCB: RNCC: 5 | RNVC: 2
51976: RNCC: 5 | RNVC: 2

24 Jan 1980

5340-14-398-8762
Mounting Plate

143988762
400393: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-459-2189
Block Clamp

144592189
PM1A172334101A1: RNCC: 3 | RNVC: 2
PM1A172334101A1: RNCC: 5 | RNVC: 2

19 Nov 1992

5340-14-544-0570
Mounting Bracket

145440570
06100156: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-14-435-2879
Angle Bracket

144352879
332A58-2063-20: RNCC: 3 | RNVC: 2
F300 0T 009 8758: RNCC: 5 | RNVC: 9

2 Nov 1989

5340-14-542-1244
Mounting Bracket

145421244
5302835-048-00: RNCC: 3 | RNVC: 2

7 Jul 2004

5340-14-484-2530
Mounting Bracket

144842530
501-729-715-0: RNCC: 3 | RNVC: 2

31 Oct 1996

5340-14-497-7741
Pipe Hanger

144977741
307-862-804-0: RNCC: 3 | RNVC: 2
307-862-803-0: RNCC: 5 | RNVC: 2

15 Oct 1997

5340-14-473-3907
Mounting Bracket

144733907
332A39-1024-00: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-366-4095
Webbing Strap

143664095
ST406M75A21-12: RNCC: 3 | RNVC: 2
91940182: RNCC: 5 | RNVC: 2

20 Nov 1980

5340-14-375-9571
Angle Bracket

143759571
NO PRIMARY REF14-375-9571: RNCC: 3 | RNVC: 2
404110782: RNCC: 5 | RNVC: 2
404110782: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-220-4848
Mending Plate

142204848
NO PRIMARY REF14-220-4848: RNCC: 3 | RNVC: 2
631448: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-322-2794
Bumper

143222794
NO PRIMARY REF14-322-2794: RNCC: 3 | RNVC: 2
258123: RNCC: 5 | RNVC: 9
S258123: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-473-8638
Mounting Bracket

144738638
332P65-2729-00: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-379-3440
Access Cover

143793440
NO PRIMARY REF14-379-3440: RNCC: 3 | RNVC: 2
345-02415-0: RNCC: 5 | RNVC: 9
345024150: RNCC: 5 | RNVC: 9

1 Oct 1982

5340-14-329-3500
Mending Plate

143293500
B35-4-40E: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-380-5793
Access Cover

143805793
693-2: RNCC: 3 | RNVC: 2

29 Nov 1982

5340-14-471-7231
Mounting Bracket

144717231
2017043A: RNCC: 3 | RNVC: 2

14 Sep 1994

5340-14-435-2281
Mounting Plate

144352281
28188097000-47: RNCC: 3 | RNVC: 2

30 Oct 1989

5340-14-412-1502
Rod End Clevis

144121502
406110: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-404-5214
Access Cover

144045214
409980: RNCC: 3 | RNVC: 2
409980: RNCC: 5 | RNVC: 9

20 Nov 1985

5340-14-349-3575
Access Cover

143493575
0144277060: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-410-5981
Angle Bracket

144105981
TID18244: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-505-7603
Loop Clamp

145057603
45024647: RNCC: 3 | RNVC: 9
45024647: RNCC: 5 | RNVC: 2

26 Mar 1998

5340-14-410-8047
Mounting Plate

144108047
A10755: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-475-0773
Mounting Plate

144750773
DM2-3007000: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-14-357-7973
Angle Bracket

143577973
AZ842-69: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-14-445-6134
Loop Holder

144456134
NO PRIMARY REF14-445-6134: RNCC: 3 | RNVC: 2
124 6310: RNCC: 5 | RNVC: 2

20 Feb 1991

5340-14-453-7004
Support Hook

144537004
T20-13D153-1: RNCC: 3 | RNVC: 2

5 Mar 1992

5340-14-459-6796
Retaining Band

144596796
A10126-02-3000P007: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-14-548-6258
Detent Plunger

145486258
03099-310: RNCC: 3 | RNVC: 2
0340100: RNCC: 5 | RNVC: 2

27 Jan 2006

5340-14-392-0136
Bumper

143920136
365A21-3459-23: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-442-3488
Angle Bracket

144423488
3511-168-05901: RNCC: 3 | RNVC: 2

10 Oct 1990

5340-14-226-1894
Loop Clamp

142261894
A0021-30S08: RNCC: 1 | RNVC: 2
512153020081: RNCC: 3 | RNVC: 2
A0021-30S08: RNCC: 5 | RNVC: 2
30S8: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-449-2486
Strap Hinge

144492486
NO PRIMARY REF14-449-2486: RNCC: 3 | RNVC: 2
429043: RNCC: 5 | RNVC: 2

7 Aug 1991

5340-14-475-0777
Mounting Plate

144750777
DM2-3007500: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-14-356-0383
Loop Clamp

143560383
E1101-19: RNCC: 3 | RNVC: 2
85-800-6938: RNCC: 6 | RNVC: 9

5 Apr 1979

5340-14-482-4193
Pipe Hanger

144824193
78732-025-058: RNCC: 3 | RNVC: 2

11 Jul 1996

5340-14-529-5786
Bumper

145295786
330A87-9422-24: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-514-4703
Mounting Plate

145144703
45219095: RNCC: 3 | RNVC: 2
45219095: RNCC: 5 | RNVC: 2
IF-192-0253: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-364-9605
Mending Plate

143649605
247SP39-0033: RNCC: 3 | RNVC: 2
85-691-2473: RNCC: 6 | RNVC: 9

2 Sep 1980

5340-14-473-2379
Synchro Clamp

144732379
321A60-9987-21: RNCC: 3 | RNVC: 2

7 Dec 1994

5340-14-459-6660
Arched Cushion

144596660
MAT169-0012F19DE21: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-14-387-5168
Key Blank

143875168
C3214-071F2: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-14-416-8393
Loop Clamp

144168393
FH1B704-398: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-449-3903
Synchro Clamp

144493903
FA1R601-15802: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-319-7785
Detent Plunger

143197785
17726-13: RNCC: 3 | RNVC: 9

1 Jan 1975

5340-14-476-0452
Loop Clamp

144760452
207310019: RNCC: 3 | RNVC: 2
PAA73-10-019: RNCC: 5 | RNVC: 2

17 May 1995

5340-14-401-1223
Butt Hinge

144011223
6814-31123: RNCC: 3 | RNVC: 2

29 May 1985

5340-14-445-4142
Shelf Bracket

144454142
J05791-03-3000P005: RNCC: 3 | RNVC: 2

13 Feb 1991

5340-14-360-4857
Bow Handle

143604857
A0249-006R1F6: RNCC: 3 | RNVC: 2

23 Nov 1979

5340-14-328-6839
Access Cover

143286839
M208-35011: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-478-6388
Cover Strip

144786388
307-163-604-0: RNCC: 3 | RNVC: 2

8 Nov 1995

5340-14-350-2238
Magnetic Catch

143502238
16-7-3390: RNCC: 3 | RNVC: 2
1673390: RNCC: 3 | RNVC: 2
C01520-78: RNCC: 5 | RNVC: 2

14 Jun 1978

5340-14-473-6386
Mounting Plate

144736386
332A11-4025-20: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-374-0786
Retaining Clip

143740786
304-906-102-0: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-548-3892
Access Cover

145483892
MS0501007-200-03: RNCC: 3 | RNVC: 2
7420780844: RNCC: 5 | RNVC: 2

12 Jan 2006

5340-14-440-3172
Blank Panel

144403172
332A58-2523-20: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-377-4840
Butt Hinge

143774840
4003-30X15X2000LAITONPOLI: RNCC: 3 | RNVC: 2

17 May 1982

5340-14-297-5824
Access Cover

142975824
80001-288: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-496-9937
Butt Hinge

144969937
13-125-00: RNCC: 3 | RNVC: 2
13-125-00: RNCC: 5 | RNVC: 9
F300 0T 022 4633: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-438-0476
Bumper

144380476
1537-07: RNCC: 3 | RNVC: 9
9401537079: RNCC: 5 | RNVC: 9

7 Mar 1990

5340-14-460-1672
Roller Holder

144601672
312-11054-0011: RNCC: 3 | RNVC: 2

13 Jan 1993

5340-14-531-2169
Mounting Bracket

145312169
341A64-5034-20: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-553-8002
Loop Clamp

145538002
120 048: RNCC: 3 | RNVC: 2
120 048: RNCC: 3 | RNVC: 2

22 May 2007

5340-14-305-3549
Mounting Bracket

143053549
557798: RNCC: 3 | RNVC: 2
5155779800: RNCC: 5 | RNVC: 2
5155779800: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-534-8554
Mounting Bracket

145348554
10655566: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-14-426-4672
Cover Strip

144264672
CJ131X387X80X1,5AG3: RNCC: 3 | RNVC: 2

1 Sep 1988

5340-14-420-4591
Retaining Band

144204591
06189077: RNCC: 3 | RNVC: 2

10 Dec 1987

5340-14-467-8543
Retaining Strap

144678543
166162: RNCC: 3 | RNVC: 2
89170214: RNCC: 5 | RNVC: 2

27 Jan 1994

5340-14-458-4937
Plug Button

144584937
925389: RNCC: 3 | RNVC: 2

23 Oct 1992

5340-14-549-5527
Angle Bracket

145495527
21251855-9: RNCC: 3 | RNVC: 2

13 Apr 2006

5340-14-411-5344
Plug Button

144115344
5000115852: RNCC: 3 | RNVC: 2

20 Aug 1986

5340-14-518-5163
Angle Bracket

145185163
M005HM09112: RNCC: 3 | RNVC: 9

9 Feb 2000

5340-14-423-9479
Retaining Strap

144239479
535888: RNCC: 3 | RNVC: 2

5 May 1988

5340-14-526-4642
Mounting Plate

145264642
RA1M707141595: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-449-6541
Retaining Strap

144496541
008566988: RNCC: 3 | RNVC: 9
8566988: RNCC: 5 | RNVC: 2

28 Aug 1991

5340-14-263-4137
Retaining Strap

142634137
R403229: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-381-4645
Access Cover

143814645
2206-826C501: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-543-9737
Mounting Bracket

145439737
4773126030: RNCC: 3 | RNVC: 9

19 Dec 2004

5340-14-407-0387
Runner

144070387
1009652: RNCC: 3 | RNVC: 2

29 Jan 1986

5340-14-389-1619
Tubular Fairlead

143891619
023465: RNCC: 3 | RNVC: 9

29 Nov 1983

5340-14-495-2730
Mounting Plate

144952730
098804V: RNCC: 3 | RNVC: 2
F300 0T 018 9266: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-544-6216
Mounting Bracket

145446216
072937987000100: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-14-470-3349
Access Cover

144703349
203502: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-14-367-5583
Butt Hinge

143675583
104003502: RNCC: 3 | RNVC: 2
104003502: RNCC: 5 | RNVC: 2

19 Jan 1981

5340-14-401-2792
Mounting Plate

144012792
132063: RNCC: 3 | RNVC: 2

5 Jun 1985

5340-14-222-3652
Bumper

142223652
0009068032: RNCC: 3 | RNVC: 2
0009068032: RNCC: 5 | RNVC: 9
9068032: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-405-2837
Rod End Clevis

144052837
40010804: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-360-2669
Mending Plate

143602669
70389: RNCC: 3 | RNVC: 2

23 Nov 1979

5340-14-551-4954
Angle Bracket

145514954
RA1B703146311: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-350-4457
Mending Plate

143504457
205689: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-371-3939
Access Cover

143713939
130513: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-555-7891
Access Cover

145557891
0292108290: RNCC: 3 | RNVC: 2

14 Dec 2007

5340-14-425-1266
Access Cover

144251266
1070010001: RNCC: 3 | RNVC: 2

22 Jun 1988

5340-14-479-5722
Lock-Release Lever

144795722
23221942-3: RNCC: 3 | RNVC: 2

24 Jan 1996

5340-14-450-4873
Access Cover

144504873
5171488900: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-14-418-2107
Access Cover

144182107
0064750040: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-447-7004
Rod End Clevis

144477004
NGS1H5105: RNCC: 3 | RNVC: 2

29 May 1991

5340-14-361-2250
Leaf Spring

143612250
5000320448: RNCC: 3 | RNVC: 2
5000320448: RNCC: 5 | RNVC: 9

24 Jan 1980

5340-14-515-3274
Mounting Bracket

145153274
3533606018: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-296-0713
Buckle

142960713
72034: RNCC: 3 | RNVC: 2
AP43: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-514-0526
Section Block Clamp

145140526
RA1M703754143: RNCC: 3 | RNVC: 2

22 Apr 1999

5340-14-539-5466
Cover Strip

145395466
SZ09.250.980: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-347-5211
Retaining Strap

143475211
0811427: RNCC: 3 | RNVC: 2

1 Mar 1978

5340-14-547-9730
Retaining Strap

145479730
RA1M701246041: RNCC: 3 | RNVC: 2

30 Nov 2005

5340-14-542-5331
Shelf Bracket

145425331
50 ZOT00000005: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-14-526-4573
Angle Bracket

145264573
RA1M705416110N1: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-381-1283
Retaining Strap

143811283
BAZ5163: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-549-9182
Runner

145499182
2092481: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-549-3014
Mounting Bracket

145493014
82096746001: RNCC: 3 | RNVC: 2

21 Mar 2006

5340-14-556-2387
Mounting Bracket

145562387
82387195000: RNCC: 3 | RNVC: 2

14 Feb 2008

5340-14-549-5037
Mounting Plate

145495037
61688966AA: RNCC: 3 | RNVC: 2

11 Apr 2006

5340-14-500-9882
Mounting Plate

145009882
F00158611: RNCC: 3 | RNVC: 2
F00158611: RNCC: 5 | RNVC: 9
F300 0T 025 0095: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-498-9325
Angle Bracket

144989325
5005028211: RNCC: 3 | RNVC: 2
5000686616: RNCC: 5 | RNVC: 9
F300 0T 012 8699: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-527-7473
Mending Plate

145277473
707786: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-14-442-6575
Bumper

144426575
0896612294: RNCC: 3 | RNVC: 2

24 Oct 1990

5340-14-308-6363
Compression Cup

143086363
0074357000: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-314-2727
Mending Plate

143142727
341A22-1002-23: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-374-3049
Access Cover

143743049
4100-61-10-1: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-316-2188
Synchro Clamp

143162188
485-102-318-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-401-8527
Access Cover

144018527
NO PRIMARY REF14-401-8527: RNCC: 3 | RNVC: 2
2-43033-0REP4: RNCC: 5 | RNVC: 9
2-43399-0REP4: RNCC: 5 | RNVC: 9
40-91-220: RNCC: 5 | RNVC: 9

13 Jun 1985

5340-14-527-9108
Loop Clamp

145279108
1977-68-02: RNCC: 3 | RNVC: 2

28 Nov 2001

5340-14-329-1532
Access Cover

143291532
78476-33: RNCC: 3 | RNVC: 2
85-679-3940: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-549-8944
Mounting Bracket

145498944
88179-3116: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-549-4966
Bumper

145494966
MC201-215212-30: RNCC: 3 | RNVC: 2

11 Apr 2006

5340-14-469-7276
Stand Base

144697276
TB30-67133-002: RNCC: 3 | RNVC: 2
TB30-67133-002: RNCC: 5 | RNVC: 2

5 May 1994

5340-14-306-4053
Rod End Clevis

143064053
MAA1-64659: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-503-5552
Lock-Release Lever

145035552
1876-30-10-24: RNCC: 3 | RNVC: 2

20 Jan 1998

5340-14-328-0270
Pawl Fastener

143280270
911-172: RNCC: 3 | RNVC: 2
911172: RNCC: 3 | RNVC: 2
88036349: RNCC: 5 | RNVC: 2
911-172: RNCC: 5 | RNVC: 9
88036349: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-411-7115
Access Cover

144117115
NO PRIMARY REF14-411-7115: RNCC: 3 | RNVC: 2
D10-44551: RNCC: 5 | RNVC: 9

27 Aug 1986

5340-14-379-6897
Anchor Strap

143796897
AM01-025: RNCC: 3 | RNVC: 9

20 Oct 1982

5340-14-549-9062
Mounting Bracket

145499062
2092224-001: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-501-9551
Mounting Plate

145019551
332A08-4684-28: RNCC: 3 | RNVC: 2

19 Nov 1997

5340-14-257-0927
Rod End Clevis

142570927
330A27-4239-20: RNCC: 3 | RNVC: 2
330A27-4239-2000: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-264-1749
Loop Clamp

142641749
55217-314DB: RNCC: 3 | RNVC: 2
55217-314-000DB: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-406-2627
Quick Release Pin

144062627
51453C10R45NW: RNCC: 3 | RNVC: 2
51453C10R45NW: RNCC: 3 | RNVC: 2
428560: RNCC: 5 | RNVC: 2
51453C10R45NW: RNCC: 5 | RNVC: 9

8 Jan 1986

5340-14-418-4655
Mounting Plate

144184655
4-454647: RNCC: 3 | RNVC: 9
4-454647: RNCC: 5 | RNVC: 2
4-454647: RNCC: 5 | RNVC: 9

26 Aug 1987

5340-14-513-3132
Mounting Bracket

145133132
5000133419: RNCC: 3 | RNVC: 2

12 Mar 1999

5340-14-418-3287
Anchor Strap

144183287
1-470216: RNCC: 3 | RNVC: 9
1-470216: RNCC: 5 | RNVC: 2
1-470216: RNCC: 5 | RNVC: 9

12 Aug 1987

5340-14-449-7911
Anchor Strap

144497911
08249: RNCC: 3 | RNVC: 2
3 12 08249 EC: RNCC: 5 | RNVC: 2

11 Sep 1991

5340-14-479-2662
Access Cover

144792662
23628304-9: RNCC: 3 | RNVC: 2

3 Jan 1996

5340-14-422-5713
Quick Release Pin

144225713
4772107230: RNCC: 3 | RNVC: 2

10 Mar 1988

5340-14-381-1725
Casement Fastener

143811725
26240972: RNCC: 3 | RNVC: 2
C240972: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-344-9940
Mending Plate

143449940
459557: RNCC: 3 | RNVC: 2
5550345-2-2: RNCC: 5 | RNVC: 9

5 Oct 1977

5340-14-295-9174
Door Closer

142959174
NO PRIMARY REF14-295-9174: RNCC: 3 | RNVC: 2
7498-1-6: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-483-3596
Mounting Plate

144833596
CESUFR8018-7200: RNCC: 3 | RNVC: 2

5 Sep 1996

5340-14-299-3586
Bridge Clamp

142993586
NO PRIMARY REF14-299-3586: RNCC: 3 | RNVC: 2
75-161-10-21: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-501-4520
Pipe Hanger

145014520
307-846-804-0: RNCC: 3 | RNVC: 2

29 Oct 1997

5340-14-374-0211
Rod End Clevis

143740211
NO PRIMARY REF14-374-0211: RNCC: 3 | RNVC: 2
01777807: RNCC: 5 | RNVC: 9
1777807: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-14-330-0674
Loop Clamp

143300674
620-854-766-0: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-329-3889
Quick Release Pin

143293889
NO PRIMARY REF14-329-3889: RNCC: 3 | RNVC: 2
P14X26-500-17-00: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-542-9985
Shelf Bracket

145429985
SH2759-03-16: RNCC: 3 | RNVC: 2

18 Aug 2004

5340-14-462-9173
Mounting Plate

144629173
2085-06-036: RNCC: 3 | RNVC: 2
89482689: RNCC: 5 | RNVC: 2

5 May 1993

5340-14-545-2932
Loop Clamp

145452932
21227125-00: RNCC: 3 | RNVC: 2
21227125-5: RNCC: 5 | RNVC: 2

31 Mar 2005

5340-14-403-4466
Access Cover

144034466
3511 245 02801: RNCC: 3 | RNVC: 2
3511-245-02801: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-554-1694
Mounting Bracket

145541694
CLB501-610-411: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-315-7594
Rod End Clevis

143157594
773-210-062FF6DET5: RNCC: 3 | RNVC: 2
773-210-062FF6DET5: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-292-5551
Angle Bracket

142925551
121E26-800-33-2: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-454-3211
Access Cover

144543211
U70549: RNCC: 3 | RNVC: 9
85-694-3803: RNCC: 6 | RNVC: 9

26 Mar 1992

5340-14-300-1656
Loop Clamp

143001656
55219-306B316DB: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-409-1219
Mounting Plate

144091219
W23433-75: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-531-4899
Handwheel

145314899
13-061-125: RNCC: 3 | RNVC: 2
ESM13-061-125: RNCC: 5 | RNVC: 2

21 Aug 2002

5340-14-408-3976
Loop Clamp

144083976
3791: RNCC: 3 | RNVC: 2
D1553-3791: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-439-2377
Mounting Bracket

144392377
332A52-1074-20: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-453-8247
Mounting Plate

144538247
085-40-153: RNCC: 3 | RNVC: 2

12 Mar 1992

5340-14-459-4583
Caster Frame

144594583
3273-9132808-00: RNCC: 3 | RNVC: 9

1 Dec 1992

5340-14-569-2856
Utility Resilient Mount

145692856
BFN45-130E15: RNCC: 3 | RNVC: 2

31 Aug 2011

5340-14-505-2047
Mending Plate

145052047
5800583-099502-002: RNCC: 3 | RNVC: 2

13 Mar 1998

5340-14-428-5793
Retaining Clip

144285793
DAR5-220: RNCC: 3 | RNVC: 2
DAR52200: RNCC: 5 | RNVC: 2

8 Dec 1988

5340-14-512-4369
Access Cover

145124369
IF1-174-005: RNCC: 3 | RNVC: 9

16 Feb 1999

5340-14-421-2616
Bumper

144212616
EA-01: RNCC: 3 | RNVC: 2

12 Jan 1988

5340-14-269-4282
Clamping Catch

142694282
NO PRIMARY REF14-269-4282: RNCC: 3 | RNVC: 2
200BT38F0UGA: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-311-6645
Pipe Hanger

143116645
3160S78-04-640: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-527-8030
Mounting Bracket

145278030
10614777: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-14-515-4041
Mounting Bracket

145154041
20512128A: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-400-0180
Corner Brace

144000180
607715: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-218-0753
Loop Clamp

142180753
366443: RNCC: 3 | RNVC: 2
366443: RNCC: 6 | RNVC: 9

1 Jan 1965

5340-14-312-8864
Retaining Strap

143128864
160-79572C: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-530-6921
Mounting Plate

145306921
T533A1121114: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-506-0220
Mounting Plate

145060220
RA1M114101480N1: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-14-538-7740
Handwheel

145387740
NGM0011040319037: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-367-6352
Tubular Fairlead

143676352
47A6036: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-549-1953
Mounting Bracket

145491953
5000138676: RNCC: 3 | RNVC: 2

8 Mar 2006

5340-14-335-0353
Bow Handle

143350353
7720173: RNCC: 3 | RNVC: 2

8 Feb 2001

5340-14-517-0006
Mounting Bracket

145170006
RA1M701226040N1: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-435-4769
Angle Bracket

144354769
DA2C201715407: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-14-485-6217
Mounting Plate

144856217
BAN 40F: RNCC: 3 | RNVC: 2
BAN 40F: RNCC: 5 | RNVC: 9
MANBAN 40F: RNCC: 5 | RNVC: 9

6 Feb 1997

5340-14-438-1521
Mounting Plate

144381521
330A72-1240-03: RNCC: 3 | RNVC: 2

7 Mar 1990

5340-14-313-3598
Retaining Strap

143133598
53572-4: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-554-6921
Access Cover

145546921
01761400: RNCC: 3 | RNVC: 2

6 Aug 2007

5340-14-549-8493
Angle Bracket

145498493
2092272: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-558-8914
Utility Access Door

145588914
DH 0458 05 55: RNCC: 3 | RNVC: 2

19 Nov 2008

5340-14-551-2912
Angle Bracket

145512912
RA1M703750213A1: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-434-6129
Blank Panel

144346129
318010: RNCC: 3 | RNVC: 2

27 Sep 1989

5340-14-359-5881
Angle Bracket

143595881
187077: RNCC: 3 | RNVC: 2

15 Oct 1979

5340-14-305-3502
Angle Bracket

143053502
TH20J1508: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-550-6021
Mounting Bracket

145506021
SP01002306A: RNCC: 3 | RNVC: 2

29 Jun 2006

5340-14-528-5351
Mounting Bracket

145285351
45710258: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-461-6566
Bow Handle

144616566
1027737L00: RNCC: 3 | RNVC: 2

19 Mar 1993

5340-14-318-9462
Synchro Clamp

143189462
0202007760: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-512-8114
Protection Bellows

145128114
195314: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-503-5228
Bow Handle

145035228
TR97683: RNCC: 3 | RNVC: 2

19 Jan 1998

5340-14-526-5240
Mounting Bracket

145265240
D66728: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-451-0970
Mounting Bracket

144510970
171399: RNCC: 3 | RNVC: 2

30 Oct 1991

5340-14-350-4934
Retaining Band

143504934
0000123334: RNCC: 3 | RNVC: 2
0000123334: RNCC: 5 | RNVC: 9
123334: RNCC: 5 | RNVC: 9

12 Jul 1978

5340-14-521-4985
Mounting Plate

145214985
F00209701: RNCC: 3 | RNVC: 2
F00209701: RNCC: 5 | RNVC: 9

2 Aug 2000

5340-14-512-8981
Cushioning Pad

145128981
551559: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-358-3322
Angle Bracket

143583322
101394006: RNCC: 3 | RNVC: 2
101394006: RNCC: 5 | RNVC: 2

13 Aug 1979

5340-14-519-5610
Mounting Plate

145195610
9947986: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-354-9047
Retaining Strap

143549047
19302454: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-508-1389
Mounting Plate

145081389
10094123: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-450-3256
Mounting Plate

144503256
103111205702: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-451-7871
Plate Spacer

144517871
5000987949: RNCC: 3 | RNVC: 2

4 Dec 1991

5340-14-444-8900
Bow Handle

144448900
9440921: RNCC: 3 | RNVC: 2

28 Jan 1991

5340-14-325-9098
Key Blank

143259098
25511B3X5XC38: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-480-8286
Mounting Bracket

144808286
702791: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-14-385-1908
Leaf Spring

143851908
0000798475: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-404-6369
Surface Bolt

144046369
002904210S: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-466-2818
Mounting Bracket

144662818
10227977: RNCC: 3 | RNVC: 2

3 Nov 1993

5340-14-211-0736
Retaining Band

142110736
15296: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-307-9718
Mending Plate

143079718
26425200: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-426-1622
Block Clamp

144261622
160H752551: RNCC: 3 | RNVC: 2

4 Aug 1988

5340-14-551-8756
Lock Spindle

145518756
43043114: RNCC: 3 | RNVC: 2
43043114: RNCC: 3 | RNVC: 9

6 Nov 2006

5340-14-448-4079
Mounting Plate

144484079
45153368: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-14-404-0211
Mounting Plate

144040211
300-706-002-0: RNCC: 3 | RNVC: 2
001657020A: RNCC: 5 | RNVC: 2

11 Sep 1985

5340-14-498-1800
Loop Clamp

144981800
91915665: RNCC: 3 | RNVC: 2
68-1-0-103-2S: RNCC: 5 | RNVC: 9
F300 0T 004 4501: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-403-9293
Runner

144039293
2000090-8-13: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-502-3425
Pipe Hanger

145023425
307-878-601-0: RNCC: 3 | RNVC: 2

9 Dec 1997

5340-14-389-9385
Retaining Strap

143899385
4-000011-000040: RNCC: 3 | RNVC: 2
4-011-0040: RNCC: 5 | RNVC: 2

26 Jan 1984

5340-14-032-0205
Threaded Rod End

140320205
413-10877-001: RNCC: 3 | RNVC: 2
413-10877-001: RNCC: 5 | RNVC: 2

5 Jul 1980

5340-14-480-2353
Mounting Plate

144802353
0048377-03X: RNCC: 3 | RNVC: 2
X48377-03: RNCC: 5 | RNVC: 2

28 Feb 1996

5340-14-496-9645
Mounting Bracket

144969645
27137112-3: RNCC: 3 | RNVC: 2
F300 0T 022 3337: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-523-8644
Blank Panel

145238644
4624932A: RNCC: 3 | RNVC: 2

8 Feb 2001

5340-14-270-6374
Angle Bracket

142706374
17-7-3833: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-528-3786
Mounting Bracket

145283786
27119710-5: RNCC: 3 | RNVC: 2

24 Jan 2002

5340-14-391-2325
Mounting Plate

143912325
2-35573: RNCC: 3 | RNVC: 2

1 Mar 1984

5340-14-346-8197
Retaining Strap

143468197
327055: RNCC: 3 | RNVC: 2
20327055-2: RNCC: 5 | RNVC: 2

19 Jan 1978

5340-14-500-9890
Mounting Bracket

145009890
F00162498: RNCC: 3 | RNVC: 2
F00162498: RNCC: 5 | RNVC: 9
F300 0T 025 0103: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-398-7141
Retaining Strap

143987141
2-36003: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-14-430-6084
Rod End Connector

144306084
PM1A472056070: RNCC: 3 | RNVC: 2
PM1A472056070: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-473-1891
Rod End Clevis

144731891
27108254-4: RNCC: 3 | RNVC: 2

7 Dec 1994

5340-14-434-8103
Rod End Clevis

144348103
1-332172: RNCC: 3 | RNVC: 2
1-332172: RNCC: 5 | RNVC: 9

4 Oct 1989

5340-14-537-6168
Loop Clamp

145376168
LN2.9.5PA: RNCC: 3 | RNVC: 2

12 Nov 2003

5340-14-535-0204
Friction Catch

145350204
Z00.N7468671622: RNCC: 3 | RNVC: 2

29 Apr 2003

5340-14-485-6702
Mounting Plate

144856702
A10A22-310-40-1: RNCC: 3 | RNVC: 2
A10A22-310-40-1: RNCC: 5 | RNVC: 2

6 Feb 1997

5340-14-264-0732
Mending Plate

142640732
424-81126: RNCC: 3 | RNVC: 2
424-81126-000: RNCC: 5 | RNVC: 2
424-81126: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-408-6518
Retaining Strap

144086518
160G262012-16: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-489-6494
Blank Panel

144896494
332A21-1018-62: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-471-9317
Mounting Plate

144719317
312-08619-001: RNCC: 3 | RNVC: 2

28 Sep 1994

5340-14-369-6830
Snap Hook

143696830
NT STCM 4240-1001: RNCC: 2 | RNVC: 2
3500720: RNCC: 3 | RNVC: 2
AJ501: RNCC: 3 | RNVC: 2
EN362: RNCC: 3 | RNVC: 9
EN 362: RNCC: 4 | RNVC: 1
J501: RNCC: 5 | RNVC: 2

17 Apr 1981

5340-14-386-1504
Angle Bracket

143861504
365A25-3177-20: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-385-9187
Bumper

143859187
7908-15: RNCC: 3 | RNVC: 2
7903088046: RNCC: 5 | RNVC: 2

24 Aug 1983

5340-14-458-5402
Rigid Caster

144585402
1718B29-15: RNCC: 3 | RNVC: 2
194999R: RNCC: 3 | RNVC: 2

23 Oct 1992

5340-14-503-0145
Cover Strip

145030145
332P67-1430-23: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-535-5129
Bow Handle

145355129
10-725-563: RNCC: 3 | RNVC: 2
SZ10.725.563: RNCC: 3 | RNVC: 2

31 May 2003

5340-14-241-8269
Stand Base

142418269
BJ479A: RNCC: 3 | RNVC: 2
SK-35A: RNCC: 6 | RNVC: 9

1 Jan 1967

5340-14-372-1426
Mending Plate

143721426
21099: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-422-0806
Retaining Band

144220806
TWDB50: RNCC: 3 | RNVC: 9

22 Feb 1988

5340-14-481-2571
Retaining Strap

144812571
10024521: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-14-551-3372
Pipe Hanger

145513372
RA1A701566879: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-417-9675
Angle Bracket

144179675
413002020012: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-397-1268
Mending Plate

143971268
20321297: RNCC: 3 | RNVC: 2
20321297: RNCC: 5 | RNVC: 9

1 Dec 1984

5340-14-455-7261
Mounting Plate

144557261
623988: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-550-4072
Handwheel

145504072
06275-4200X20: RNCC: 3 | RNVC: 2

19 Jun 2006

5340-14-445-7236
Hand Crank Arm

144457236
BLC236557: RNCC: 3 | RNVC: 2

22 Feb 1991

5340-14-543-4489
Mounting Bracket

145434489
072922987000002: RNCC: 3 | RNVC: 2

30 Oct 2004

5340-14-409-4095
Pipe Hanger

144094095
104762009: RNCC: 3 | RNVC: 2
104762009: RNCC: 5 | RNVC: 2

28 May 1986

5340-14-433-6174
Mounting Bracket

144336174
39529366: RNCC: 3 | RNVC: 2
39529366: RNCC: 5 | RNVC: 9

2 Aug 1989

5340-14-576-2174
Utility Resilient Mount

145762174
4157101: RNCC: 3 | RNVC: 2

6 Jun 2013

5340-14-357-8238
Anchor Strap

143578238
0000131005: RNCC: 3 | RNVC: 2
0000131005: RNCC: 5 | RNVC: 9
131005: RNCC: 5 | RNVC: 9

20 Jul 1979

5340-14-537-0340
Turnbuckle Body

145370340
1204511: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-14-259-5739
Access Cover

142595739
169280: RNCC: 3 | RNVC: 2
1082007: RNCC: 5 | RNVC: 2
169280: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-417-4051
Access Cover

144174051
253338P03: RNCC: 3 | RNVC: 2
253338P03: RNCC: 5 | RNVC: 9

8 Jul 1987

5340-14-425-8913
Retaining Strap

144258913
093196Y01TRA: RNCC: 3 | RNVC: 2
093196Y: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-14-480-8335
Angle Bracket

144808335
1302115P010: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-14-349-9344
Access Cover

143499344
142409: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-466-1591
Plug Button

144661591
120069-584: RNCC: 3 | RNVC: 9
89472306: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-378-9109
Angle Bracket

143789109
5000110797: RNCC: 3 | RNVC: 2
5000110797: RNCC: 5 | RNVC: 9

6 Sep 1982

5340-14-437-8647
Loop Clamp

144378647
23000601: RNCC: 3 | RNVC: 2
382UTB060: RNCC: 5 | RNVC: 2

21 Feb 1990

5340-14-432-2578
Strap Hinge

144322578
400335321705: RNCC: 3 | RNVC: 2

31 May 1989

5340-14-475-0863
Angle Bracket

144750863
1083384E00: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-14-420-3019
Mounting Plate

144203019
332645: RNCC: 3 | RNVC: 9

25 Nov 1987

5340-14-439-1187
Mounting Bracket

144391187
NO PRIMARY REF14-439-1187: RNCC: 3 | RNVC: 2
1840032: RNCC: 5 | RNVC: 9

25 Apr 1990

5340-14-403-5913
Angle Bracket

144035913
365A53-1303-01: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-215-9048
Mounting Bracket

142159048
253-5M21P47: RNCC: 3 | RNVC: 9
PA253-5M21P47: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-500-3746
Access Cover

145003746
456-10766-800: RNCC: 3 | RNVC: 2
F300 0T 024 3846: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-521-1084
Arched Cushion

145211084
MAT169-0027F18DE76: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-14-444-6159
Pad Eye

144446159
54807-129-1: RNCC: 3 | RNVC: 9

16 Jan 1991

5340-14-369-9464
Angle Bracket

143699464
398102030009: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-330-9589
Rod End Clevis

143309589
150399: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-516-6485
Access Cover

145166485
91754747: RNCC: 3 | RNVC: 2
UPE00106: RNCC: 5 | RNVC: 9

8 Oct 1999

5340-14-414-7362
Access Cover

144147362
309144: RNCC: 3 | RNVC: 2

26 Feb 1987

5340-14-502-5092
Mounting Bracket

145025092
5000540514: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-417-0767
Loop Clamp

144170767
230699: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-14-489-5516
Mounting Plate

144895516
47134448: RNCC: 3 | RNVC: 2

30 Jul 1997

5340-14-245-1559
Anchor Strap

142451559
70483611: RNCC: 3 | RNVC: 2
483611: RNCC: 5 | RNVC: 9
70483611: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-523-6842
Utility Access Door

145236842
K9343851: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-306-4408
Access Cover

143064408
050866: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-542-3453
Mounting Bracket

145423453
10649945: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-14-422-9177
Rod End Clevis

144229177
255579: RNCC: 3 | RNVC: 2

24 Mar 1988

5340-14-461-6279
Access Cover

144616279
1DM163823: RNCC: 3 | RNVC: 2
91714362: RNCC: 5 | RNVC: 2

17 Mar 1993

5340-14-249-7288
Access Cover

142497288
152774: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-416-1270
Access Cover

144161270
218551: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-398-8117
Access Cover

143988117
26651: RNCC: 3 | RNVC: 2

20 Feb 1985

5340-14-293-3803
Access Cover

142933803
0064630200: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-535-7564
Bridge Clamp

145357564
T945A2001211: RNCC: 3 | RNVC: 2

25 Jun 2003

5340-14-526-8782
Mounting Plate

145268782
20712751: RNCC: 3 | RNVC: 2

12 Sep 2001

5340-14-549-8858
Runner

145498858
21106785: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-349-2479
Mending Plate

143492479
1043514: RNCC: 3 | RNVC: 2
1043514: RNCC: 5 | RNVC: 2

22 May 1978

5340-14-354-0164
Cover Strip

143540164
A11A234310001: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-551-3562
Angle Bracket

145513562
RA1A702336343: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-574-9343
Utility Access Door

145749343
MB7662F00: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-14-542-0814
Support Hook

145420814
9404ADM143: RNCC: 3 | RNVC: 2

2 Jul 2004

5340-14-485-6392
Mounting Bracket

144856392
1302141P304: RNCC: 3 | RNVC: 2

6 Feb 1997

5340-14-494-2090
Mounting Plate

144942090
29365222: RNCC: 3 | RNVC: 2
29365222: RNCC: 3 | RNVC: 9
F300 0T 016 1329: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-523-2926
Angle Bracket

145232926
RA1M702446063: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-436-5885
Retaining Strap

144365885
DA2C206734021: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-537-9028
Mounting Bracket

145379028
10255436: RNCC: 3 | RNVC: 2

3 Dec 2003

5340-14-551-0318
Pipe Hanger

145510318
7420887135: RNCC: 3 | RNVC: 2

22 Aug 2006

5340-14-549-6787
Mounting Bracket

145496787
2716374690: RNCC: 3 | RNVC: 2

26 Apr 2006

5340-14-416-4357
Webbing Strap

144164357
0805045T01: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-14-514-0534
Section Block Clamp

145140534
RA1M703854159: RNCC: 3 | RNVC: 2

22 Apr 1999

5340-14-549-4746
Mounting Bracket

145494746
0249856810: RNCC: 3 | RNVC: 2

7 Apr 2006

5340-14-538-7744
Handwheel

145387744
NGM0011040319176: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-343-1102
Retaining Strap

143431102
199096: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-14-479-7406
Bumper

144797406
PM1A761037172: RNCC: 3 | RNVC: 2
PM1A761037172: RNCC: 5 | RNVC: 2
85-695-4342: RNCC: 6 | RNVC: 9

2 Feb 1996

5340-14-333-8514
Rod End Clevis

143338514
502-507-362-0: RNCC: 3 | RNVC: 2

23 Apr 1976

5340-14-465-2721
Bridge Clamp

144652721
365A08-4239-08: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-542-9933
Metal Grille

145429933
5924-CF-50-1-0-0100-2/3-22: RNCC: 3 | RNVC: 9

18 Aug 2004

5340-14-420-4689
Butt Hinge

144204689
4-455602-004: RNCC: 3 | RNVC: 9

10 Dec 1987

5340-14-393-7682
Access Cover

143937682
NO PRIMARY REF14-393-7682: RNCC: 3 | RNVC: 2
9-329-4671-518: RNCC: 5 | RNVC: 9

23 Jun 1984

5340-14-477-9786
Loop Clamp

144779786
501-875-522-0: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-14-495-6480
Mounting Plate

144956480
Q46414-14: RNCC: 3 | RNVC: 2
F300 0T 019 5761: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-459-4581
Swivel Caster

144594581
3272-9136401-00: RNCC: 3 | RNVC: 9

1 Dec 1992

5340-14-031-8289
Rim Lock

140318289
911A500: RNCC: 3 | RNVC: 2
HY861-239A: RNCC: 5 | RNVC: 2

5 Jul 1980

5340-14-544-1708
Angle Bracket

145441708
21229307-00: RNCC: 3 | RNVC: 2
21229307-4: RNCC: 5 | RNVC: 2

6 Jan 2005

5340-14-031-9776
Retaining Strap

140319776
32-06-48-1: RNCC: 3 | RNVC: 2
32-06-48-1: RNCC: 5 | RNVC: 2

5 Jul 1980

5340-14-448-3217
Plug Button

144483217
SPI4-65479: RNCC: 3 | RNVC: 2

24 Jun 1991

5340-14-409-1619
Access Cover

144091619
1044505: RNCC: 3 | RNVC: 2
1044505: RNCC: 5 | RNVC: 2

16 Apr 1986

5340-14-548-9787
Access Cover

145489787
KTC01A 243 PLD020: RNCC: 3 | RNVC: 2

28 Feb 2006

5340-14-546-9222
Utility Access Door

145469222
071371987000001B: RNCC: 3 | RNVC: 2

8 Sep 2005

5340-14-395-5113
Mounting Bracket

143955113
5-1881B43152-849: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-520-6210
Mending Plate

145206210
PR46327-2: RNCC: 3 | RNVC: 2

24 May 2000

5340-14-280-8580
Access Cover

142808580
DLT009749: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-402-7349
Rod End Clevis

144027349
607561: RNCC: 3 | RNVC: 2

19 Jul 1985

5340-14-305-2091
Webbing Strap

143052091
1153PBH: RNCC: 3 | RNVC: 2
9-1156P: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-535-0670
Mounting Bracket

145350670
02000043: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-14-450-0265
Access Cover

144500265
10752: RNCC: 3 | RNVC: 2
89416714: RNCC: 5 | RNVC: 2

18 Sep 1991

5340-14-417-3151
Anchor Strap

144173151
20626569: RNCC: 3 | RNVC: 2
20626569: RNCC: 5 | RNVC: 9

1 Jul 1987

5340-14-250-3386
Rod End Clevis

142503386
R12608B12BBL: RNCC: 2 | RNVC: 2

1 Jan 1968

5340-14-554-0092
Access Cover

145540092
358 248: RNCC: 3 | RNVC: 2
358 248: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-14-516-5949
Access Cover

145165949
2104205: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-14-411-6778
Plug Button

144116778
231834: RNCC: 3 | RNVC: 2

27 Aug 1986

5340-14-366-8191
Anchor Strap

143668191
970555: RNCC: 3 | RNVC: 2
970555: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-418-0874
Access Cover

144180874
73153: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-421-3675
Access Cover

144213675
29684990: RNCC: 3 | RNVC: 2

14 Jan 1988

5340-14-529-8869
Utility Access Door

145298869
OB3773: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-519-2681
Access Cover

145192681
3511 192 07381: RNCC: 3 | RNVC: 2
61975446: RNCC: 5 | RNVC: 2

15 Mar 2000

5340-14-504-7839
Mounting Bracket

145047839
2253574T01: RNCC: 3 | RNVC: 2
8005755N00: RNCC: 5 | RNVC: 2
2 253 574 T 01: RNCC: 5 | RNVC: 2

4 Mar 1998

5340-14-488-4781
Access Cover

144884781
29728524: RNCC: 3 | RNVC: 2
29728524: RNCC: 3 | RNVC: 9

14 May 1997

5340-14-522-1098
Access Cover

145221098
2188791: RNCC: 3 | RNVC: 2
2188791: RNCC: 5 | RNVC: 2

4 Oct 2000

5340-14-322-3544
Rod End Clevis

143223544
M117674: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-476-8264
Access Cover

144768264
46098545: RNCC: 3 | RNVC: 2

5 Jul 1995

5340-14-553-7582
Access Cover

145537582
107 171: RNCC: 3 | RNVC: 2
107 171: RNCC: 3 | RNVC: 2

21 May 2007

5340-14-381-3889
Utility Access Door

143813889
9439719: RNCC: 3 | RNVC: 2
TKF9439719: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-417-7904
Access Cover

144177904
553751: RNCC: 3 | RNVC: 2
00553751: RNCC: 5 | RNVC: 2

22 Jul 1987

5340-14-546-5096
Access Cover

145465096
5010616913: RNCC: 3 | RNVC: 2

12 Jul 2005

5340-14-554-5887
Access Cover

145545887
0390940230: RNCC: 3 | RNVC: 2

23 Jul 2007

5340-14-542-5158
Utility Access Door

145425158
1SH41820392: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-14-515-3831
Access Cover

145153831
6000019: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-338-5976
Access Door Hinge

143385976
6720720: RNCC: 3 | RNVC: 2
2072: RNCC: 5 | RNVC: 2

17 Dec 1976

5340-14-377-6323
Mounting Plate

143776323
366A62-1041-00: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-551-0220
Loop Clamp

145510220
ABS0901-060: RNCC: 1 | RNVC: 2
901060: RNCC: 3 | RNVC: 2
ABS0901-060: RNCC: 5 | RNVC: 2

22 Aug 2006

5340-14-511-6463
Mounting Bracket

145116463
1-625-08-11: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-301-8273
Loop Clamp

143018273
GSM183-002F22: RNCC: 3 | RNVC: 2
000MA051REP20: RNCC: 5 | RNVC: 2
GSM1708F22: RNCC: 5 | RNVC: 2
GSM183-02F22: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-439-5665
Plug Button

144395665
ZB2-SZ2: RNCC: 3 | RNVC: 2
ZB2SZ2: RNCC: 5 | RNVC: 2
3389110329124: RNCC: 5 | RNVC: 2

15 May 1990

5340-14-503-0018
Mounting Bracket

145030018
330A22-2513-20: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-409-5560
Vent Plug

144095560
5170-01DN25: RNCC: 3 | RNVC: 2
99038789: RNCC: 3 | RNVC: 2
99038789: RNCC: 5 | RNVC: 9
5170-01DIA26X34GAZ: RNCC: 5 | RNVC: 9
5170-01DN25: RNCC: 5 | RNVC: 9
517001DIA2634GAZ: RNCC: 5 | RNVC: 9

28 May 1986

5340-14-340-3539
Angle Bracket

143403539
M3C708-42-01: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-516-2192
Clamping Catch

145162192
0020437: RNCC: 3 | RNVC: 2
206000: RNCC: 3 | RNVC: 9
206000-10: RNCC: 5 | RNVC: 9

15 Sep 1999

5340-14-473-6382
Mounting Plate

144736382
332A08-8321-04: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-549-8835
Utility Access Door

145498835
2093337-001: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-503-5317
Retaining Clip

145035317
148608: RNCC: 3 | RNVC: 9

19 Jan 1998

5340-14-444-3694
Mounting Plate

144443694
C22P21CN8104: RNCC: 3 | RNVC: 2

9 Jan 1991

5340-14-512-0074
Mounting Bracket

145120074
GPN1801800030: RNCC: 3 | RNVC: 2
0050792: RNCC: 3 | RNVC: 2

2 Feb 1999

5340-14-395-0720
Retaining Strap

143950720
D55312: RNCC: 3 | RNVC: 2
D55312: RNCC: 5 | RNVC: 2

2 Oct 1984

5340-14-284-5465
Pipe Hanger

142845465
0249927570: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-320-0697
Runner

143200697
938822: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-472-6350
Metal Grille

144726350
29050896: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-14-443-9642
Retaining Strap

144439642
P109287: RNCC: 3 | RNVC: 2

17 Dec 1990

5340-14-504-8597
Loop Clamp

145048597
20053461: RNCC: 3 | RNVC: 2

6 Mar 1998

5340-14-301-9162
Bow Handle

143019162
1267: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-238-0454
Retaining Strap

142380454
052321: RNCC: 3 | RNVC: 9

1 Jan 1967

5340-14-208-5200
Bumper

142085200
0945990208: RNCC: 3 | RNVC: 2
0945990208: RNCC: 5 | RNVC: 9
945990208: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-332-9793
Buckle

143329793
192074: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-554-0187
Mounting Bracket

145540187
358 445: RNCC: 3 | RNVC: 2
358 445: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-14-479-6675
Swivel Caster

144796675
JBPN070/2160355: RNCC: 3 | RNVC: 2
A09010315: RNCC: 3 | RNVC: 2
HT102DT25: RNCC: 5 | RNVC: 2
JBPN070/2160355: RNCC: 5 | RNVC: 2
JBPN070-CC1/A: RNCC: 5 | RNVC: 2
A09010315: RNCC: 5 | RNVC: 9
F300 0T 018 3443: RNCC: 6 | RNVC: 9

31 Jan 1996

5340-14-230-8736
Bow Handle

142308736
61174075180B028: RNCC: 3 | RNVC: 2
4075-180B028: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-429-4581
Bridge Clamp

144294581
755-1014: RNCC: 3 | RNVC: 2

24 Jan 1989

5340-14-384-3188
Loop Clamp

143843188
92831251: RNCC: 3 | RNVC: 2
9-28GE25: RNCC: 5 | RNVC: 2

4 May 1983

5340-14-364-4185
Corner Brace

143644185
330A58-3700-206: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-386-8415
Webbing Strap

143868415
682-44-47-9M0-5M: RNCC: 3 | RNVC: 2
85-692-4341: RNCC: 6 | RNVC: 9

24 Aug 1983

5340-14-483-9034
Metal Grille

144839034
MAT853-0149F11REP1: RNCC: 3 | RNVC: 2
3HDF135X135RAL9010: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-14-490-2977
Mounting Plate

144902977
J05085-03-0400P022: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-515-1965
Pipe Hanger

145151965
T212A10X0000: RNCC: 1 | RNVC: 2
150101435H-S: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-514-4800
Access Cover

145144800
45219108: RNCC: 3 | RNVC: 2
45219108: RNCC: 5 | RNVC: 2
5010579476: RNCC: 5 | RNVC: 2
IF-192-0299: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-511-6290
Loop Clamp

145116290
78647A020: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-526-4083
Angle Bracket

145264083
46138713: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-481-3762
Access Cover

144813762
263967: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-497-5045
Retaining Band

144975045
1538-38: RNCC: 3 | RNVC: 2
9626610880: RNCC: 5 | RNVC: 2
F300 0T 023 2795: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-528-8713
Cushioning Pad

145288713
GC056399Y00: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-14-465-1811
Access Cover

144651811
365P68-1512-25: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-497-4534
Mounting Bracket

144974534
10223002: RNCC: 3 | RNVC: 2
F300 0T 023 2078: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-504-0754
Angle Bracket

145040754
MB1189F00: RNCC: 3 | RNVC: 2

5 Feb 1998

5340-14-309-5598
Access Cover

143095598
0000440150: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-463-0233
Mounting Bracket

144630233
0000758399: RNCC: 3 | RNVC: 2

12 May 1993

5340-14-505-0016
Bumper

145050016
5000710768: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-378-9239
Retaining Strap

143789239
0000790400: RNCC: 3 | RNVC: 2
790400: RNCC: 5 | RNVC: 9
0000790400: RNCC: 5 | RNVC: 9

6 Sep 1982

5340-14-548-6107
Angle Bracket

145486107
RA1A704736521: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-449-5974
Access Cover

144495974
29003389: RNCC: 3 | RNVC: 2

28 Aug 1991

5340-14-454-7171
Runner

144547171
PM1A711024430A1: RNCC: 3 | RNVC: 2
PM1A711024430A1: RNCC: 5 | RNVC: 2

9 Apr 1992

5340-14-480-9599
Door Handle

144809599
10061708: RNCC: 3 | RNVC: 2

11 Apr 1996

5340-14-506-7360
Mounting Bracket

145067360
BB2576: RNCC: 3 | RNVC: 2

13 May 1998

5340-14-548-2326
Bumper

145482326
43801052: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-14-393-5523
Anchor Strap

143935523
970763: RNCC: 3 | RNVC: 2
970763: RNCC: 5 | RNVC: 9

7 Apr 1984

5340-14-543-3787
Angle Bracket

145433787
071626987000000: RNCC: 3 | RNVC: 2

23 Oct 2004

5340-14-441-9198
Loop Clamp

144419198
E05400326: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-441-0318
Corner Brace

144410318
007535010P: RNCC: 3 | RNVC: 2

14 Aug 1990

5340-14-482-9381
Pipe Hanger

144829381
78733-025-036B: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-504-9207
Retaining Bail

145049207
236E: RNCC: 3 | RNVC: 9
728-180: RNCC: 5 | RNVC: 2
236E: RNCC: 5 | RNVC: 2

11 Mar 1998

5340-14-244-5305
Retaining Strap

142445305
NO PRIMARY REF14-244-5305: RNCC: 3 | RNVC: 2
Z23204: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-468-6511
Arched Cushion

144686511
MAT169-0012F23DE17: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-14-268-9931
Handwheel

142689931
MAT137-005F8ACIER: RNCC: 3 | RNVC: 2
553-000MA060F7-3C1: RNCC: 5 | RNVC: 2
GSM137-007F12ACIER: RNCC: 5 | RNVC: 2
GSM137-07F12ACIER: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-362-1132
Synchro Clamp

143621132
GSM175-005F18: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-431-5880
Block Clamp

144315880
160G722043-07: RNCC: 3 | RNVC: 2

26 Apr 1989

5340-14-257-2423
Mending Plate

142572423
330A25-2202-40: RNCC: 3 | RNVC: 2
330A25-2202-4000: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-370-7373
Access Cover

143707373
676-41116-00-5B: RNCC: 3 | RNVC: 2
676-41116-00-9M: RNCC: 3 | RNVC: 2
676-41116-00-94: RNCC: 5 | RNVC: 2

5 Jun 1981

5340-14-436-8673
Control Rod

144368673
31763040: RNCC: 3 | RNVC: 9
85-694-0569: RNCC: 6 | RNVC: 9

3 Jan 1990

5340-14-031-7201
Butt Hinge

140317201
MS7524-2A04.00: RNCC: 3 | RNVC: 2
MS7524-2A102: RNCC: 5 | RNVC: 2
MS7524-2A102: RNCC: 5 | RNVC: 9
MS7524-2A102: RNCC: 5 | RNVC: 9

14 Jun 1980

5340-14-319-7369
Retaining Strap

143197369
M2-2522-2103-00: RNCC: 3 | RNVC: 2
M2-2522-2103-00: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-429-8349
Mounting Plate

144298349
AZ16136: RNCC: 3 | RNVC: 2
AZ16136: RNCC: 5 | RNVC: 9

14 Feb 1989

5340-14-453-7526
Mounting Plate

144537526
2085-04-022: RNCC: 3 | RNVC: 2
89411684: RNCC: 5 | RNVC: 9

5 Mar 1992

5340-14-500-7557
Mounting Plate

145007557
E64009998229: RNCC: 3 | RNVC: 2
F300 0T 024 7756: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-430-9483
Pipe Hanger

144309483
G230075-23: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-14-382-9823
Strap Hinge

143829823
404307369: RNCC: 3 | RNVC: 9
404307369: RNCC: 5 | RNVC: 9

17 Mar 1983

5340-14-516-8620
Mounting Plate

145168620
202420308620: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-14-403-4432
Mending Plate

144034432
501140: RNCC: 3 | RNVC: 2
313086: RNCC: 5 | RNVC: 2
8050500: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-312-9958
Loop Clamp

143129958
ASNA0021-25G09: RNCC: 1 | RNVC: 2
51113105009: RNCC: 3 | RNVC: 2
25G9: RNCC: 5 | RNVC: 2
HB25G9: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-423-3282
Rod End Clevis

144233282
160G742529-02: RNCC: 3 | RNVC: 2

14 Apr 1988

5340-14-479-9895
Angle Bracket

144799895
1405-213-000A: RNCC: 3 | RNVC: 2

20 Feb 1996

5340-14-465-8585
Runner

144658585
81022-2-24-2-1: RNCC: 3 | RNVC: 2

14 Oct 1993

5340-14-503-0977
Rod End Clevis

145030977
NO PRIMARY REF14-503-0977: RNCC: 3 | RNVC: 2
011040180000: RNCC: 5 | RNVC: 2

7 Jan 1998

5340-14-326-9557
Access Cover

143269557
PAA62-02-008: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-541-5142
Mounting Bracket

145415142
1091399-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-522-2302
Permanent Magnet

145222302
CF09401D: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-14-332-9501
Angle Bracket

143329501
16457: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-256-2843
Bow Handle

142562843
70879030: RNCC: 3 | RNVC: 2
70879030: RNCC: 5 | RNVC: 9
879030: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-479-1000
Buckle

144791000
218402201570: RNCC: 3 | RNVC: 2
218402201570: RNCC: 5 | RNVC: 9

13 Dec 1995

5340-14-405-6049
Angle Bracket

144056049
035544: RNCC: 3 | RNVC: 2

4 Dec 1985

5340-14-340-9766
Surface Bolt

143409766
16411075: RNCC: 3 | RNVC: 2
16411075: RNCC: 3 | RNVC: 9

16 Mar 1977

5340-14-551-5232
Pipe Hanger

145515232
RPL711000016: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-308-9302
Rod End Clevis

143089302
AS68-4: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-297-4606
Rim Lock Set

142974606
1048CAME1048-2: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-373-9906
Anchor Strap

143739906
102195405: RNCC: 3 | RNVC: 2
102195405: RNCC: 5 | RNVC: 2

8 Dec 1981

5340-14-345-8624
Access Cover

143458624
300-685-601-0: RNCC: 3 | RNVC: 2
001362010A: RNCC: 5 | RNVC: 2
300-685-601P: RNCC: 5 | RNVC: 2

5 Nov 1977

5340-14-531-7797
Access Cover

145317797
350A61-1723-02: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-14-479-2671
Access Cover

144792671
23628310-1: RNCC: 3 | RNVC: 2

3 Jan 1996

5340-14-432-6743
Pawl Fastener

144326743
F3709S: RNCC: 3 | RNVC: 2
5000367491: RNCC: 5 | RNVC: 2
5516003817: RNCC: 5 | RNVC: 2
3709S: RNCC: 5 | RNVC: 2

20 Jun 1989

5340-14-532-9739
Access Cover

145329739
GA66020-1: RNCC: 3 | RNVC: 2

14 Jan 2003

5340-14-299-1035
Bumper

142991035
121E77-105-03-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-426-2893
Flush Catch Claw

144262893
23074766-9: RNCC: 3 | RNVC: 2

18 Aug 1988

5340-14-472-5851
Clamp Bolt Assembly

144725851
S3SD18134-7: RNCC: 3 | RNVC: 2
S3SD18134-7: RNCC: 5 | RNVC: 2

3 Nov 1994

5340-14-549-5516
Mounting Bracket

145495516
21251549-6: RNCC: 3 | RNVC: 2

13 Apr 2006

5340-14-517-1604
Flush Catch Claw

145171604
459790: RNCC: 3 | RNVC: 2

10 Nov 1999

5340-14-246-2737
Rod End Clevis

142462737
0CCA05-000000-04A1: RNCC: 3 | RNVC: 2
A680-4: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-392-7818
Flush Catch Claw

143927818
400874: RNCC: 3 | RNVC: 2
BGE400874: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-434-8108
Rod End Clevis

144348108
2-332177: RNCC: 3 | RNVC: 2
2-332177: RNCC: 5 | RNVC: 9

4 Oct 1989

5340-14-420-0302
Angle Bracket

144200302
5-456509: RNCC: 3 | RNVC: 9
402335: RNCC: 5 | RNVC: 2
5-456509: RNCC: 5 | RNVC: 2
5-456509: RNCC: 5 | RNVC: 9

18 Nov 1987

Load More Results