What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 104 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 104 of 446

5340-14-276-2510
Pipe Hanger

142762510
160-10353: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-401-7123
Access Cover

144017123
NO PRIMARY REF14-401-7123: RNCC: 3 | RNVC: 2
67841: RNCC: 5 | RNVC: 9

13 Jun 1985

5340-14-260-0924
Lock Bolt

142600924
321A86-0142-00: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-393-2131
Mounting Bracket

143932131
365A87-3018-43: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-14-437-9562
Rim Lock Set

144379562
330A87-1099-20: RNCC: 3 | RNVC: 2

28 Feb 1990

5340-14-481-7011
Flush Catch

144817011
SH-SAUTE-TROL: RNCC: 3 | RNVC: 2

25 May 1996

5340-14-351-3706
Retaining Strap

143513706
650-791-044-0: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-442-0219
Cover Strip

144420219
332A87-1079-25: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-526-5625
Access Cover

145265625
9012-103-000B: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-269-5193
Quick Release Pin

142695193
08-01-10-07-00: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-314-4704
Retaining Strap

143144704
177373: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-409-0820
Mounting Plate

144090820
4771621520: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-521-7326
Mounting Bracket

145217326
010097019P: RNCC: 3 | RNVC: 2

12 Sep 2000

5340-14-422-4405
Angle Bracket

144224405
152671: RNCC: 3 | RNVC: 2

3 Mar 1988

5340-14-554-7365
Angle Bracket

145547365
61385057: RNCC: 3 | RNVC: 2

8 Aug 2007

5340-14-547-7801
Mounting Plate

145477801
5010650123: RNCC: 3 | RNVC: 2

12 Nov 2005

5340-14-495-9350
Access Cover

144959350
47150-910: RNCC: 3 | RNVC: 2
F300 0T 020 5412: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-375-2648
Flush Catch Claw

143752648
16-7-3290: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-427-7421
Loop Clamp

144277421
51313106015: RNCC: 3 | RNVC: 2
21G15TROU6-2: RNCC: 5 | RNVC: 2

9 Nov 1988

5340-14-442-5430
Clamp Bolt Assembly

144425430
S3SD18146-3: RNCC: 3 | RNVC: 2
S3SD18146-3: RNCC: 5 | RNVC: 2
V3SD18146-3: RNCC: 5 | RNVC: 2

17 Oct 1990

5340-14-528-6931
Mounting Bracket

145286931
GA67076: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-14-518-4610
Mounting Bracket

145184610
T711A1001154: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-522-4325
Mounting Plate

145224325
4322 021 34321: RNCC: 3 | RNVC: 2
91724772: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-14-537-4426
Buckle

145374426
899010: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-501-5794
Clamping Catch

145015794
39117780: RNCC: 3 | RNVC: 9

5 Nov 1997

5340-14-379-7646
Hand Crank Arm

143797646
BAZ3827: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-265-1355
Loop Clamp

142651355
55218-208D507DB: RNCC: 3 | RNVC: 2
55218-208-001DB: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-395-9822
Butt Hinge

143959822
0000662327: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-305-0389
Loop Clamp

143050389
M3C701-088: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-553-8449
Mounting Bracket

145538449
82105961000: RNCC: 3 | RNVC: 2

23 May 2007

5340-14-373-8207
Rim Lock Set

143738207
NO PRIMARY REF14-373-8207: RNCC: 3 | RNVC: 2
6600-04MNFH006: RNCC: 5 | RNVC: 9

13 Nov 1981

5340-14-555-9193
Mounting Bracket

145559193
TPANK02307: RNCC: 3 | RNVC: 2
TPANK02307: RNCC: 5 | RNVC: 9

8 Jan 2008

5340-14-469-1025
Angle Bracket

144691025
305-342-101-0: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-14-533-9886
Shelf Bracket

145339886
2P90450-00: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-278-3315
Pipe Hanger

142783315
160-11524-30: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-529-0586
Mounting Bracket

145290586
10471718: RNCC: 3 | RNVC: 2

6 Mar 2002

5340-14-550-9573
Mounting Bracket

145509573
10720740000: RNCC: 3 | RNVC: 2

2 Aug 2006

5340-14-266-1472
Bumper

142661472
C245429: RNCC: 3 | RNVC: 2
26245429: RNCC: 5 | RNVC: 2
540236: RNCC: 5 | RNVC: 2
CSFC245429: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-547-7752
Mounting Bracket

145477752
5010604986: RNCC: 3 | RNVC: 2

12 Nov 2005

5340-14-553-1439
Mounting Plate

145531439
0064581170: RNCC: 3 | RNVC: 2

6 Mar 2007

5340-14-292-4182
Rod End Clevis

142924182
NO PRIMARY REF14-292-4182: RNCC: 3 | RNVC: 2
1720006: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-270-8627
Retaining Strap

142708627
H90N2001: RNCC: 3 | RNVC: 2
530891: RNCC: 5 | RNVC: 2

4 May 1983

5340-14-404-8840
Angle Bracket

144048840
366A68-1374-03: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-265-1382
Loop Clamp

142651382
55219-312D507ADL: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-353-2249
Anchor Strap

143532249
4192-311B510: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-549-6410
Mounting Bracket

145496410
JCB 10 137-208: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-14-332-4519
Rim Lock Set

143324519
NO PRIMARY REF14-332-4519: RNCC: 3 | RNVC: 2
1700-03-1729B1MN004SANSCLE: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-399-2968
Access Cover

143992968
4120-29: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-464-9615
Mounting Plate

144649615
365A52-1355-00: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-550-0771
Angle Bracket

145500771
169E662-00: RNCC: 3 | RNVC: 2

1 Jun 2006

5340-14-233-9081
Retaining Clip

142339081
M3R882-001: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-339-1008
Rod End Clevis

143391008
SP1-10-01-01: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-509-9837
Lock-Release Lever

145099837
5313-00-02: RNCC: 3 | RNVC: 2
5340AA1131652: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-490-1793
Mounting Plate

144901793
5302357.02 43.03: RNCC: 3 | RNVC: 2
5302357-02 43-03: RNCC: 5 | RNVC: 2
F300 0T 024 2511: RNCC: 6 | RNVC: 9

17 Sep 1997

5340-14-341-1728
Retaining Strap

143411728
M3C702-317: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-311-4040
Angle Bracket

143114040
341A68-1334-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-383-1078
Bumper

143831078
365A84-3046-21: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-323-3804
Control Rod

143233804
GSM173-013F19: RNCC: 3 | RNVC: 2
GSM173-13F19: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-465-1471
Bow Handle

144651471
365A23-1621-00: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-473-8262
Mounting Bracket

144738262
332A41-0413-00: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-340-3126
Pipe Hanger

143403126
M3C704-027: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-482-9304
Pipe Hanger

144829304
78732-040-051B: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-462-3950
Control Rod

144623950
R24277-57: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-14-326-9965
Shimmy Damper

143269965
K171-3B: RNCC: 3 | RNVC: 2
K171-3B: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-537-7475
Mounting Bracket

145377475
330A63-5030-07: RNCC: 3 | RNVC: 2

19 Nov 2003

5340-14-512-5347
Section Block Clamp

145125347
FB1A702-25-02: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-316-4619
Loop Clamp

143164619
BN418-501F11A1: RNCC: 3 | RNVC: 2
2200031: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-341-0724
Access Cover

143410724
M363-04772: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-236-6473
Bail Handle

142366473
A35-1-01-06: RNCC: 3 | RNVC: 2
A35-1-01-06: RNCC: 3 | RNVC: 9

1 Jan 1967

5340-14-409-4930
Retaining Strap

144094930
AE159-2M113P18: RNCC: 3 | RNVC: 2
AE159-2M113P18A: RNCC: 5 | RNVC: 2
97-035-0-019: RNCC: 5 | RNVC: 2

28 May 1986

5340-14-261-1755
Flush Catch Claw

142611755
NO PRIMARY REF14-261-1755: RNCC: 3 | RNVC: 2
MA2-04-04-06: RNCC: 5 | RNVC: 2
MA2-04-04-06: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-379-3883
Anchor Strap

143793883
NO PRIMARY REF14-379-3883: RNCC: 3 | RNVC: 2
345-66322-0: RNCC: 5 | RNVC: 9
345663220: RNCC: 5 | RNVC: 9

1 Oct 1982

5340-14-252-0615
Angle Bracket

142520615
485-000-980-0: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-548-0679
Loop Clamp

145480679
108-A-PA-IS: RNCC: 3 | RNVC: 2

8 Dec 2005

5340-14-424-5552
Loop Clamp

144245552
1715-83: RNCC: 3 | RNVC: 2
9401715839: RNCC: 5 | RNVC: 2
7910034496: RNCC: 5 | RNVC: 2

27 May 1988

5340-14-554-5178
Loop Clamp

145545178
NX1NB3P: RNCC: 3 | RNVC: 9
CC949PPIF-008: RNCC: 5 | RNVC: 2

17 Jul 2007

5340-14-482-1754
Mounting Bracket

144821754
2-DHC6-04-113: RNCC: 3 | RNVC: 2
2DHC6-04-113: RNCC: 5 | RNVC: 2
2DHC6-04-113: RNCC: 5 | RNVC: 2
1670AA2064569: RNCC: 6 | RNVC: 9

22 Jun 1996

5340-14-332-1715
Mending Plate

143321715
6063-926: RNCC: 3 | RNVC: 9

2 Jul 1975

5340-14-531-6844
Angle Bracket

145316844
1003515: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-14-210-5260
Handle Grip

142105260
C525F: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-216-3092
Strap End Clip

142163092
25ACIER: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-445-2398
Clamping Catch

144452398
702710491010: RNCC: 3 | RNVC: 2

6 Feb 1991

5340-14-354-8855
Angle Bracket

143548855
2000110-2-6: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-460-2059
Mounting Bracket

144602059
LN446018F9: RNCC: 3 | RNVC: 2
RAB0304: RNCC: 5 | RNVC: 2

15 Jan 1993

5340-14-324-5946
Mounting Plate

143245946
M120137: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-488-7737
Protection Bellows

144887737
1827243: RNCC: 3 | RNVC: 2

3 Jun 1997

5340-14-300-0877
Retaining Strap

143000877
181411: RNCC: 3 | RNVC: 2
MAF0001001841: RNCC: 6 | RNVC: 9

1 Jan 1973

5340-14-351-1632
Retaining Strap

143511632
218021: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-524-8141
Angle Bracket

145248141
1006948F00: RNCC: 3 | RNVC: 2

18 Apr 2001

5340-14-423-7498
Angle Bracket

144237498
10101200102: RNCC: 3 | RNVC: 2
89415207: RNCC: 5 | RNVC: 2

28 Apr 1988

5340-14-382-5941
Handwheel

143825941
16766862: RNCC: 3 | RNVC: 2
16766862: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-462-4013
Lock-Release Lever

144624013
57990: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-14-423-0499
Runner

144230499
39232243: RNCC: 3 | RNVC: 2
39232243: RNCC: 5 | RNVC: 9

31 Mar 1988

5340-14-455-4242
Mounting Bracket

144554242
39530729: RNCC: 3 | RNVC: 2
39530729: RNCC: 5 | RNVC: 9

21 May 1992

5340-14-396-3957
Butt Hinge

143963957
4003-40X2000LAIT0NP0LI: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-500-8238
Section Block Clamp

145008238
E64009998095: RNCC: 3 | RNVC: 2
F300 0T 024 8440: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-543-0818
Angle Bracket

145430818
2533-556: RNCC: 3 | RNVC: 9

18 Aug 2004

5340-14-270-9153
Loop Clamp

142709153
201177: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-363-1589
Loop Clamp

143631589
556151: RNCC: 3 | RNVC: 2
556151-00: RNCC: 5 | RNVC: 2
SOG556151: RNCC: 5 | RNVC: 9
85-691-1758: RNCC: 6 | RNVC: 9

3 Apr 1980

5340-14-404-5711
Expansion Plug

144045711
32417115: RNCC: 3 | RNVC: 2
P106072A: RNCC: 5 | RNVC: 2
99-201-9505: RNCC: 6 | RNVC: 9

20 Nov 1985

5340-14-408-5533
Loop Clamp

144085533
NO PRIMARY REF14-408-5533: RNCC: 3 | RNVC: 2
91561156: RNCC: 5 | RNVC: 2
0353242: RNCC: 5 | RNVC: 9

2 Apr 1986

5340-14-489-6248
Blank Panel

144896248
332A61-5152-20: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-544-1657
Mounting Bracket

145441657
MC1123Q-A2: RNCC: 3 | RNVC: 2

6 Jan 2005

5340-14-439-8389
Detent Plunger

144398389
332A58-0023-0083: RNCC: 3 | RNVC: 2

23 May 1990

5340-14-439-3085
Pipe Hanger

144393085
C58000-333: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-378-9600
Access Cover

143789600
1850-20-002: RNCC: 3 | RNVC: 2
1850-20-002: RNCC: 5 | RNVC: 2
185020002: RNCC: 5 | RNVC: 2
1850-20-002: RNCC: 5 | RNVC: 2

6 Sep 1982

5340-14-329-5460
Access Cover

143295460
T20-13B209: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-325-8248
Access Cover

143258248
NO PRIMARY REF14-325-8248: RNCC: 3 | RNVC: 2
19414430: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-290-2758
Rod End Clevis

142902758
330A33-0131-00: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-411-0262
Angle Bracket

144110262
376-200-60: RNCC: 3 | RNVC: 2
85-693-3173: RNCC: 6 | RNVC: 9

31 Jul 1986

5340-14-554-9128
Mounting Bracket

145549128
82117086000: RNCC: 3 | RNVC: 2

7 Sep 2007

5340-14-464-3312
Angle Bracket

144643312
863-056-1: RNCC: 3 | RNVC: 2
863-036-3: RNCC: 5 | RNVC: 2
S0C863036-3: RNCC: 5 | RNVC: 2
862-062-2B: RNCC: 5 | RNVC: 9

28 Jul 1993

5340-14-509-2246
Locking Stay

145092246
87.7.1021: RNCC: 3 | RNVC: 2
87-7-1021: RNCC: 5 | RNVC: 9
91760348: RNCC: 5 | RNVC: 9

21 Oct 1998

5340-14-503-4475
Angle Bracket

145034475
NO PRIMARY REF14-503-4475: RNCC: 3 | RNVC: 2
NNP5340844553478: RNCC: 5 | RNVC: 9

14 Jan 1998

5340-14-323-3682
Handwheel

143233682
301C0-0017F4: RNCC: 3 | RNVC: 2
301C0-017F4: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-468-6634
Access Cover

144686634
35-6751-014: RNCC: 3 | RNVC: 2

16 Mar 1994

5340-14-318-5487
Rod End Clevis

143185487
NO PRIMARY REF14-318-5487: RNCC: 3 | RNVC: 2
71448079REPU13: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-345-7845
Bumper

143457845
18013-2289: RNCC: 3 | RNVC: 2
2289-25S: RNCC: 5 | RNVC: 2

5 Oct 1977

5340-14-353-5175
Butt Hinge

143535175
NO PRIMARY REF14-353-5175: RNCC: 3 | RNVC: 2
03-743481A: RNCC: 5 | RNVC: 2
431-58A: RNCC: 5 | RNVC: 9

16 Jan 1979

5340-14-442-2460
Threaded Rod End

144422460
8198: RNCC: 3 | RNVC: 2
85-694-1675: RNCC: 6 | RNVC: 9

3 Oct 1990

5340-14-219-0509
Runner

142190509
253-5M663P48B: RNCC: 3 | RNVC: 9
PA253-5M663P48B: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-549-8769
Mounting Bracket

145498769
2093240: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-467-4289
Mounting Bracket

144674289
160R742237-12: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-14-429-9609
Webbing Strap

144299609
9181-50: RNCC: 3 | RNVC: 2
9255777280: RNCC: 5 | RNVC: 2

21 Feb 1989

5340-14-542-0221
Mounting Plate

145420221
20048-533: RNCC: 3 | RNVC: 2
502106004040A: RNCC: 3 | RNVC: 9
2 0048-533: RNCC: 5 | RNVC: 2

2 Jul 2004

5340-14-434-1319
Mounting Bracket

144341319
332A67-1950-6301: RNCC: 3 | RNVC: 2

6 Sep 1989

5340-14-458-2088
Sliding Block

144582088
J05402-22: RNCC: 3 | RNVC: 2

8 Oct 1992

5340-14-464-8889
Mounting Bracket

144648889
312-15169-001: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-466-7334
Mortise Lock

144667334
8719-37: RNCC: 3 | RNVC: 2
9252125880: RNCC: 5 | RNVC: 2

24 Nov 1993

5340-14-528-7273
Access Cover

145287273
815-2-36-224: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-14-256-4321
Pipe Hanger

142564321
C0LLIERAVIS18-6-35CHR0MATE: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-365-7328
Snap Hook

143657328
A2000-16: RNCC: 3 | RNVC: 9

8 Oct 1980

5340-14-413-7644
Loop Clamp

144137644
ASNA0021-25F06: RNCC: 1 | RNVC: 2
ASNA0021-25F06: RNCC: 3 | RNVC: 2
A0021-25F06: RNCC: 5 | RNVC: 2

15 Jan 1987

5340-14-401-7346
Rim Lock Set

144017346
271-01: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-236-5568
Loop Clamp

142365568
A10-27-182-15-0: RNCC: 3 | RNVC: 2
A10-27-182-15-0: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-548-7431
Mounting Bracket

145487431
702-1101: RNCC: 3 | RNVC: 2

6 Feb 2006

5340-14-549-5540
Mounting Plate

145495540
ST1-661-054-03: RNCC: 3 | RNVC: 2

13 Apr 2006

5340-14-281-2598
Rod End Connector

142812598
121A26-730-01-07: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-394-1073
Control Rod

143941073
9-3-1110: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-437-8139
Retaining Clip

144378139
88150022: RNCC: 3 | RNVC: 2
5000808301: RNCC: 5 | RNVC: 2
E88150022: RNCC: 5 | RNVC: 2
60012446: RNCC: 5 | RNVC: 9

21 Feb 1990

5340-14-558-8621
Utility Access Door

145588621
SD1080: RNCC: 3 | RNVC: 2

18 Nov 2008

5340-14-554-3729
Mounting Plate

145543729
156 587: RNCC: 3 | RNVC: 2
156 587: RNCC: 3 | RNVC: 2

26 Jun 2007

5340-14-443-8850
Loop Clamp

144438850
51120605026: RNCC: 3 | RNVC: 2
24FE26: RNCC: 5 | RNVC: 2

11 Dec 1990

5340-14-365-1422
Mending Plate

143651422
969653: RNCC: 3 | RNVC: 2
969653: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-552-0078
Loop Clamp

145520078
5010571650: RNCC: 3 | RNVC: 2

20 Nov 2006

5340-14-433-5998
Stake Driving Cap

144335998
980023: RNCC: 3 | RNVC: 9
91608610: RNCC: 5 | RNVC: 2

2 Aug 1989

5340-14-528-9967
Mounting Bracket

145289967
706129: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-14-339-3626
Retaining Strap

143393626
192725: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-351-0506
Access Cover

143510506
22722996: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-504-6284
Mounting Plate

145046284
F00207723: RNCC: 3 | RNVC: 2
F00143815: RNCC: 5 | RNVC: 9
F00207723: RNCC: 5 | RNVC: 9

25 Feb 1998

5340-14-517-6520
Utility Access Door

145176520
CRM280150120A1: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-291-3928
Retaining Strap

142913928
0235220940: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-514-1487
Bumper

145141487
S94050: RNCC: 3 | RNVC: 2

28 Apr 1999

5340-14-434-2685
Angle Bracket

144342685
557961: RNCC: 3 | RNVC: 2

19 Sep 1989

5340-14-551-2590
Cover Strip

145512590
RA1M701926411: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-312-8294
Retaining Strap

143128294
0249856330: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-448-0807
Angle Bracket

144480807
PM1A237182005: RNCC: 3 | RNVC: 2
PM1A237182005: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-523-4937
Cover Strip

145234937
01-250-459: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-14-550-9088
Pipe Hanger

145509088
RA1B702416123: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-430-7011
Butt Hinge

144307011
PM1A713511110: RNCC: 3 | RNVC: 2
PM1A713511110: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-548-6344
Mounting Bracket

145486344
RA1M701226017N1: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-501-2523
Handwheel

145012523
515-003: RNCC: 3 | RNVC: 2
515.003: RNCC: 3 | RNVC: 2
F300 0T 025 2929: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-464-9419
Turnbuckle Body

144649419
9970-147-058: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-205-0356
Retaining Strap

142050356
202-00-031: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-464-8936
Mounting Bracket

144648936
312-01700-001: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-383-6900
Loop Clamp

143836900
B48CA1030-031: RNCC: 3 | RNVC: 2
B48CA1030-031: RNCC: 5 | RNVC: 2
B48CA1030-031: RNCC: 5 | RNVC: 9
B48CA1030-031: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-531-2195
Mounting Bracket

145312195
341A65-7560-50: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-219-0510
Runner

142190510
253-5M663P49: RNCC: 3 | RNVC: 9
PA253-5M663P49: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-297-8518
Doorknob

142978518
NO PRIMARY REF14-297-8518: RNCC: 3 | RNVC: 2
837020: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-490-5558
Mounting Plate

144905558
J05085-04-0900P006: RNCC: 3 | RNVC: 2

2 Oct 1997

5340-14-367-2625
Retaining Strap

143672625
TRFAB108-01-57: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-361-2572
Retaining Strap

143612572
P12203-01: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-484-8212
Mounting Bracket

144848212
332P67-1522-01: RNCC: 3 | RNVC: 2

5 Dec 1996

5340-14-427-5182
Lock-Release Lever

144275182
NO PRIMARY REF14-427-5182: RNCC: 3 | RNVC: 2
22032: RNCC: 5 | RNVC: 9

20 Oct 1988

5340-14-389-4531
Angle Bracket

143894531
365A53-1383-01: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-410-5132
Loop Clamp

144105132
ASNA0021-21G05: RNCC: 1 | RNVC: 2
213100500: RNCC: 3 | RNVC: 2
21G05: RNCC: 5 | RNVC: 2
A0021-21G05: RNCC: 5 | RNVC: 2
A0021-21G05: RNCC: 5 | RNVC: 2
85-692-9309: RNCC: 6 | RNVC: 9

2 Jul 1986

5340-14-492-5653
Mounting Bracket

144925653
NO PRIMARY REF14-492-5653: RNCC: 3 | RNVC: 2
5001007044: RNCC: 5 | RNVC: 9
F300 0T 007 9994: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-410-7455
Mounting Plate

144107455
A02358-03-1000P008: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-473-3922
Angle Bracket

144733922
332A41-4103-20: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-342-8743
Rod End Clevis

143428743
ST114M213-31P24D: RNCC: 3 | RNVC: 2
ST114M213-31P240: RNCC: 5 | RNVC: 2
ST114M213-3P24: RNCC: 5 | RNVC: 2
ST114M213-3P24A: RNCC: 5 | RNVC: 2

16 May 1977

5340-14-511-6467
Mounting Bracket

145116467
1-625-09-02: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-539-7448
Mounting Plate

145397448
21034056-00: RNCC: 3 | RNVC: 2
21034056-0: RNCC: 5 | RNVC: 2

5 Feb 2004

5340-14-551-4642
Mounting Plate

145514642
00-AL-DK-020/V: RNCC: 3 | RNVC: 2
18777938-7: RNCC: 5 | RNVC: 2

25 Sep 2006

5340-14-283-5177
Loop Clamp

142835177
NO PRIMARY REF14-283-5177: RNCC: 3 | RNVC: 2
17-600-8: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-234-5833
Plug Button

142345833
3210-32-14-087-1: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-406-5913
Anchor Strap

144065913
853-300-067-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-331-7922
Retaining Strap

143317922
574-312-220-0: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-437-6095
Cover Strip

144376095
PM1A121214015: RNCC: 3 | RNVC: 2
PM1A121214015: RNCC: 5 | RNVC: 2

7 Feb 1990

5340-14-408-2263
Access Cover

144082263
GAM051015104: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-409-3347
Rod End Clevis

144093347
72562: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-313-7609
Access Cover

143137609
0210140030: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-477-1308
Access Cover

144771308
1031058010: RNCC: 3 | RNVC: 2
DAH1031058010: RNCC: 5 | RNVC: 9

26 Jul 1995

5340-14-378-0070
Plug Button

143780070
16379511: RNCC: 3 | RNVC: 2
16379511: RNCC: 5 | RNVC: 9

20 Jul 1982

5340-14-435-5409
Access Cover

144355409
TS110040: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-14-482-8639
Rod End Clevis

144828639
009116210P: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-478-6561
Stake Pocket

144786561
CEFM332800211-REP2: RNCC: 3 | RNVC: 2
RAR3558: RNCC: 5 | RNVC: 2

10 Nov 1995

5340-14-463-8695
Mounting Plate

144638695
2920-50-01-03: RNCC: 3 | RNVC: 2
89472941: RNCC: 5 | RNVC: 2

30 Jun 1993

5340-14-387-5173
Runner

143875173
C3295-026F11: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-14-418-0983
Anchor Strap

144180983
23108831-6: RNCC: 3 | RNVC: 2
23108831: RNCC: 5 | RNVC: 2

6 Aug 1987

5340-14-514-4704
Mounting Plate

145144704
45219096: RNCC: 3 | RNVC: 2
45219096: RNCC: 5 | RNVC: 2
IF-192-0252: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-328-5820
Retaining Strap

143285820
J00650-01-0400P035: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-473-8370
Mounting Bracket

144738370
332A61-6430-20: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-389-3218
Loop Clamp

143893218
NO PRIMARY REF14-389-3218: RNCC: 3 | RNVC: 2
S900-24: RNCC: 5 | RNVC: 9

29 Nov 1983

5340-14-340-3233
Angle Bracket

143403233
M3R704-34-10: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-497-1109
Mounting Plate

144971109
5546-014: RNCC: 3 | RNVC: 2
F300 0T 022 6679: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-336-0447
Pipe Hanger

143360447
M3R704-049: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-238-9915
Loop Clamp

142389915
NO PRIMARY REF14-238-9915: RNCC: 3 | RNVC: 2
E137D259: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-346-4837
Pipe Hanger

143464837
F704-22: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-470-9299
Mounting Bracket

144709299
332A61-1409-0201: RNCC: 3 | RNVC: 2
F300 0T 017 5602: RNCC: 5 | RNVC: 9

13 Jul 1994

5340-14-515-3214
Compression Cup

145153214
2653433841: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-535-9034
Clamping Catch

145359034
7700046295: RNCC: 3 | RNVC: 2

27 Jun 2003

5340-14-539-5277
Mounting Bracket

145395277
DKP12SUP1IT: RNCC: 3 | RNVC: 2
DKP12SUP1IT: RNCC: 5 | RNVC: 2

22 Jan 2004

5340-14-494-2824
Angle Bracket

144942824
PA01PD080006: RNCC: 3 | RNVC: 2
F300 0T 016 8051: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-032-3203
Bumper

140323203
741279: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-323-5250
Retaining Strap

143235250
001208015P: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-518-5218
Loop Clamp

145185218
0000745425: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-257-0609
Loop Clamp

142570609
A67053: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-437-4233
Mounting Plate

144374233
3002155: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-541-0673
Mounting Bracket

145410673
10672108000: RNCC: 3 | RNVC: 2

13 May 2004

5340-14-332-2501
Retaining Strap

143322501
000-1000: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-482-4337
Mounting Plate

144824337
RA1M124101480: RNCC: 3 | RNVC: 2

11 Jul 1996

5340-14-381-7804
Quick Release Pin

143817804
16762457: RNCC: 3 | RNVC: 2
16762457: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-551-5073
Angle Bracket

145515073
RA1M112111121N1: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-553-0560
Mounting Bracket

145530560
RA1M701242041A1N1: RNCC: 3 | RNVC: 2

27 Feb 2007

5340-14-531-2399
Mounting Bracket

145312399
F1262866: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-281-2201
Retaining Strap

142812201
10100095: RNCC: 3 | RNVC: 2
10100095: RNCC: 5 | RNVC: 2
CHR10100095: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-436-1088
Mounting Bracket

144361088
790-280: RNCC: 3 | RNVC: 2

5 Dec 1989

5340-14-569-1796
Utility Resilient Mount

145691796
HH15-20-03-IM2: RNCC: 3 | RNVC: 2

18 Aug 2011

5340-14-543-0291
Pipe Hanger

145430291
EA5M704-50-850: RNCC: 3 | RNVC: 2

18 Aug 2004

5340-14-535-7633
Rod Retainer Clip

145357633
B110-800-002A: RNCC: 3 | RNVC: 2

25 Jun 2003

5340-14-437-4453
Bow Handle

144374453
332A25-1129-03: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-458-1549
Cover Strip

144581549
3160S25-29-579-51: RNCC: 3 | RNVC: 2
85-694-8502: RNCC: 6 | RNVC: 9

8 Oct 1992

5340-14-041-2730
Loop Clamp

140412730
J00547-00-5000P003: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-417-9998
Runner

144179998
86203-1116MM: RNCC: 3 | RNVC: 2
15755: RNCC: 5 | RNVC: 2

6 Aug 1987

5340-14-286-3331
Loop Clamp

142863331
51300005027: RNCC: 3 | RNVC: 2
11N27: RNCC: 5 | RNVC: 2
A0021-11N27: RNCC: 5 | RNVC: 2
9562811220: RNCC: 5 | RNVC: 2
A0021-11N27: RNCC: 5 | RNVC: 2
110002700: RNCC: 5 | RNVC: 2
HB11N27: RNCC: 5 | RNVC: 2
ASNA0021-11N27: RNCC: 5 | RNVC: 9
ASNA0021-11N27: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-329-1217
Angle Bracket

143291217
14-529-200-06: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-280-0551
Loop Clamp

142800551
51115305013: RNCC: 3 | RNVC: 2
25S13: RNCC: 5 | RNVC: 2
A0021-25S13: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-376-6273
Butt Hinge

143766273
400320191010: RNCC: 3 | RNVC: 2
D1512-803SP: RNCC: 5 | RNVC: 2

28 Apr 1982

5340-14-505-1828
Retaining Strap

145051828
303-149-701-6: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-340-3536
Angle Bracket

143403536
M3C708-19-01: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-425-8360
Block Clamp

144258360
A10M77-513-60-0: RNCC: 3 | RNVC: 2
A10M77-513-60-0: RNCC: 5 | RNVC: 2

21 Jul 1988

5340-14-531-4911
Mounting Bracket

145314911
858-002-701-0: RNCC: 3 | RNVC: 2

21 Aug 2002

5340-14-532-5204
Mounting Bracket

145325204
330A67-3564-0401: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-14-461-3319
Arched Cushion

144613319
NPAN2S0020B-F16-TYPE100-2M: RNCC: 2 | RNVC: 2

8 Mar 1993

5340-14-549-6107
Angle Bracket

145496107
AGUT1-129190-01: RNCC: 3 | RNVC: 2

21 Apr 2006

5340-14-485-6322
Angle Bracket

144856322
L15245-19: RNCC: 3 | RNVC: 2
L1524519: RNCC: 5 | RNVC: 2
P15245-19L: RNCC: 5 | RNVC: 2

6 Feb 1997

5340-14-471-6029
Roller Holder

144716029
312-05791-015: RNCC: 3 | RNVC: 2

7 Sep 1994

5340-14-366-4386
Anchor Strap

143664386
0000663714: RNCC: 3 | RNVC: 2
0000669433: RNCC: 5 | RNVC: 2
0000663714: RNCC: 5 | RNVC: 9
663714: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-411-5528
Rod End Clevis

144115528
0A1113: RNCC: 3 | RNVC: 2

21 Aug 1986

5340-14-456-0937
Pawl Fastener

144560937
1002-09-01: RNCC: 3 | RNVC: 2

18 Jun 1992

5340-14-394-3484
Quick Release Pin

143943484
PN145-02: RNCC: 3 | RNVC: 2

28 Aug 1984

5340-14-265-4507
Retaining Strap

142654507
9970-145-177: RNCC: 3 | RNVC: 2
456-701-448-0: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-281-2601
Rod End Clevis

142812601
121E26-746-07-0: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-323-2299
Access Cover

143232299
103-40-154: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-345-1950
Rod End Clevis

143451950
FD1B571-10810: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-213-1608
Detent Plunger

142131608
T863-56M1P141A: RNCC: 3 | RNVC: 2
T86356M1P141: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-445-3886
Retaining Strap

144453886
10770-4751: RNCC: 3 | RNVC: 2
2068110-9: RNCC: 5 | RNVC: 2

12 Feb 1991

5340-14-236-2680
Bumper

142362680
35-20: RNCC: 3 | RNVC: 9

1 Jan 1967

5340-14-531-2422
Synchro Clamp

145312422
L7000E100H10600: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-471-5451
Filler Opening Cap

144715451
Z00.N7079093825: RNCC: 3 | RNVC: 2

31 Aug 1994

5340-14-379-7364
Angle Bracket

143797364
2206-332C460: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-505-0889
Mounting Plate

145050889
03325510: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-401-2119
Synchro Clamp

144012119
200060242: RNCC: 3 | RNVC: 2

29 May 1985

5340-14-515-7650
Butt Hinge

145157650
530010: RNCC: 3 | RNVC: 2

30 Jul 1999

5340-14-337-2440
Angle Bracket

143372440
F10A705200016: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-402-3213
Retaining Strap

144023213
0783123A00: RNCC: 3 | RNVC: 2

3 Jul 1985

5340-14-332-2247
Retaining Strap

143322247
193384: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-554-0012
Mounting Bracket

145540012
156 194: RNCC: 3 | RNVC: 2
156 194: RNCC: 3 | RNVC: 2

6 Jun 2007

5340-14-467-3435
Mounting Bracket

144673435
20191991: RNCC: 3 | RNVC: 2

5 Jan 1994

5340-14-379-7450
Mending Plate

143797450
114082214: RNCC: 3 | RNVC: 2
114082214: RNCC: 5 | RNVC: 2

20 Oct 1982

5340-14-478-3500
Angle Bracket

144783500
059491Y02TRA: RNCC: 3 | RNVC: 2
059491Y: RNCC: 5 | RNVC: 2

25 Oct 1995

5340-14-404-2685
Mounting Plate

144042685
P33Z2: RNCC: 3 | RNVC: 2
P2619REP26: RNCC: 5 | RNVC: 2

11 Sep 1985

5340-14-351-9722
Lock-Release Lever

143519722
S326: RNCC: 3 | RNVC: 2
TH20N810: RNCC: 3 | RNVC: 2

16 Oct 1978

5340-14-461-7654
Loop Clamp

144617654
0310932: RNCC: 3 | RNVC: 2

24 Mar 1993

5340-14-383-1891
Angle Bracket

143831891
MY2051512540G01: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-479-6784
Runner

144796784
11095D440805: RNCC: 3 | RNVC: 2

31 Jan 1996

5340-14-523-1899
Loop Clamp

145231899
12313105008: RNCC: 3 | RNVC: 2
91755525: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-551-5148
Threaded Rod End

145515148
6801BTA200001: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-552-1931
Bumper

145521931
61152523AA: RNCC: 3 | RNVC: 2

1 Dec 2006

5340-14-348-7052
Retaining Strap

143487052
1182170: RNCC: 3 | RNVC: 2
1182170: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-477-2411
Shelf Bracket

144772411
RA1M219220511: RNCC: 3 | RNVC: 2

2 Aug 1995

5340-14-432-4054
Protection Bellows

144324054
3671474: RNCC: 3 | RNVC: 2
5604064: RNCC: 5 | RNVC: 2
3671474: RNCC: 5 | RNVC: 9
5604064: RNCC: 5 | RNVC: 9

9 Jun 1989

5340-14-543-3135
Lock Key

145433135
071309987000000: RNCC: 3 | RNVC: 2

19 Oct 2004

5340-14-444-5210
Mounting Plate

144445210
123020309: RNCC: 3 | RNVC: 9

14 Jan 1991

5340-14-544-0966
Block Clamp

145440966
160-78779: RNCC: 3 | RNVC: 2

4 Jan 2005

5340-14-478-4660
Bridge Clamp

144784660
39252406: RNCC: 3 | RNVC: 2
39252406: RNCC: 3 | RNVC: 9

8 Nov 1995

5340-14-382-9144
Lock-Release Lever

143829144
148175: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-551-1774
Mounting Plate

145511774
47177159: RNCC: 3 | RNVC: 2

1 Sep 2006

5340-14-461-9563
Butt Hinge

144619563
T700A5285006003: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-300-5502
Mending Plate

143005502
816617: RNCC: 3 | RNVC: 2
816617: RNCC: 5 | RNVC: 2
816617: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-551-2852
Mounting Bracket

145512852
RA1B701303710N1: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-515-1499
Mounting Plate

145151499
4657595A: RNCC: 3 | RNVC: 2
4657595A: RNCC: 3 | RNVC: 9

8 Jul 1999

5340-14-532-0925
Clamping Catch

145320925
01-2340235: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-360-2971
Mounting Plate

143602971
512265: RNCC: 3 | RNVC: 2
SOG512265: RNCC: 5 | RNVC: 9

23 Nov 1979

5340-14-515-1768
Loop Clamp

145151768
111FE18: RNCC: 3 | RNVC: 2

9 Jul 1999

5340-14-514-5102
Mounting Plate

145145102
203506: RNCC: 3 | RNVC: 2

26 May 1999

5340-14-349-9550
Mending Plate

143499550
22346564: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-478-6743
Mounting Plate

144786743
39527900: RNCC: 3 | RNVC: 2
39527900: RNCC: 5 | RNVC: 9

14 Nov 1995

5340-14-507-9658
Bow Handle

145079658
553831G0001: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-398-9019
Bail Handle

143989019
PR.303-EV: RNCC: 3 | RNVC: 2
501353: RNCC: 3 | RNVC: 2
PR303EV: RNCC: 5 | RNVC: 2
12441562-4: RNCC: 5 | RNVC: 2
70042: RNCC: 5 | RNVC: 2

6 Mar 1985

5340-14-372-5856
Bumper

143725856
MCVH4: RNCC: 3 | RNVC: 2
91531166: RNCC: 5 | RNVC: 2

1 Sep 1981

5340-14-410-2781
Access Cover

144102781
0400-402-000: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-14-540-6643
Access Cover

145406643
332A08-6380-0053: RNCC: 3 | RNVC: 2

15 Apr 2004

5340-14-364-8687
Access Cover

143648687
16299868: RNCC: 1 | RNVC: 2
A01074-00-0000P001: RNCC: 3 | RNVC: 2
0073334R00: RNCC: 5 | RNVC: 2
16299868: RNCC: 5 | RNVC: 9
0024-14-409-0406: RNCC: 6 | RNVC: 9

2 Sep 1980

5340-14-490-3066
Mounting Plate

144903066
J05085-01-0220P002: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-502-6294
Mounting Bracket

145026294
M447-04-04101: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-553-0899
Protection Bellows

145530899
48202-13500: RNCC: 3 | RNVC: 2

28 Feb 2007

5340-14-380-2819
Bumper

143802819
365A21-3109-36: RNCC: 3 | RNVC: 2

8 Nov 1982

5340-14-568-8207
Utility Resilient Mount

145688207
HH14-30-03CM2: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-14-532-0682
Mounting Bracket

145320682
03-725-321: RNCC: 3 | RNVC: 2
SZ03.725.321: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-461-2215
Pipe Hanger

144612215
054385-853-921: RNCC: 3 | RNVC: 9
7703079384: RNCC: 5 | RNVC: 2
054385853921: RNCC: 5 | RNVC: 9
054385-853921: RNCC: 5 | RNVC: 9

3 Mar 1993

5340-14-031-7238
Vent Plug

140317238
91353099: RNCC: 3 | RNVC: 2
2-2798-00-00-55: RNCC: 3 | RNVC: 9
91353099: RNCC: 5 | RNVC: 2
91353099: RNCC: 5 | RNVC: 9
91353099: RNCC: 5 | RNVC: 9
91353099: RNCC: 5 | RNVC: 9

14 Jun 1980

5340-14-519-0271
Access Cover

145190271
332A21-3212-06: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-302-5405
Caster Frame

143025405
330A27-3051-22: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-473-3253
Retaining Band

144733253
MY20241-81820: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-318-9552
Access Cover

143189552
NO PRIMARY REF14-318-9552: RNCC: 3 | RNVC: 2
42-04-60-013: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-347-1333
Cover Strip

143471333
3160S25-21-026-51: RNCC: 3 | RNVC: 2
85-688-4757: RNCC: 6 | RNVC: 9

19 Jan 1978

5340-14-486-2502
Bumper

144862502
282-1-G-108: RNCC: 3 | RNVC: 2

5 Mar 1997

5340-14-397-9639
Retaining Strap

143979639
3511 998 21781: RNCC: 3 | RNVC: 2
3511 998 21781: RNCC: 5 | RNVC: 2
14390-4: RNCC: 5 | RNVC: 9

31 Jan 1985

5340-14-448-2577
Mounting Bracket

144482577
27110496-5: RNCC: 3 | RNVC: 2

18 Jun 1991

5340-14-499-6267
Loop Clamp

144996267
3630.113 9: RNCC: 3 | RNVC: 2
F300 0T 023 6021: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-457-7968
Pawl Fastener

144577968
31208072ED: RNCC: 3 | RNVC: 2

24 Sep 1992

5340-14-371-9559
Loop Clamp

143719559
51314105022: RNCC: 3 | RNVC: 2
214102200: RNCC: 5 | RNVC: 2
21R22: RNCC: 5 | RNVC: 2

5 Aug 1981

5340-14-521-1667
Mounting Plate

145211667
21426348-3: RNCC: 3 | RNVC: 2

12 Jul 2000

5340-14-222-1461
Retaining Strap

142221461
2-01588: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-500-8248
Section Block Clamp

145008248
E64009998040: RNCC: 3 | RNVC: 2
F300 0T 024 8450: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-402-0985
Rod End Connector

144020985
406144: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-263-4124
Retaining Strap

142634124
R403049: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-246-4670
Retaining Strap

142464670
A65794: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-550-8068
Filler Opening Cap

145508068
45679057: RNCC: 3 | RNVC: 2

18 Jul 2006

5340-14-356-8354
Mounting Plate

143568354
174-21: RNCC: 3 | RNVC: 2

15 May 1979

5340-14-472-0016
Bail Handle

144720016
R47-180X86LAITON: RNCC: 3 | RNVC: 2

28 Sep 1994

5340-14-413-9498
Runner

144139498
10-216-018: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-418-1879
Swivel Caster

144181879
332A91-3122-00: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-242-2857
Retaining Strap

142422857
NO PRIMARY REF14-242-2857: RNCC: 3 | RNVC: 2
P227751: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-428-5512
Runner

144285512
4604DME000-0006: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-471-7825
Mounting Plate

144717825
NO-PRIMARY REF14-471-7825: RNCC: 3 | RNVC: 2
705269: RNCC: 5 | RNVC: 9
P01966: RNCC: 5 | RNVC: 9

14 Sep 1994

5340-14-527-3351
Loop Clamp

145273351
21234359-00: RNCC: 3 | RNVC: 2
21234359-8: RNCC: 5 | RNVC: 2

24 Oct 2001

5340-14-324-9812
Mending Plate

143249812
D1553-8064: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-505-3445
Loop Clamp

145053445
SP110APP-IS: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-445-1158
Retaining Bail

144451158
MAT162-0066F1: RNCC: 3 | RNVC: 2

31 Jan 1991

5340-14-371-8411
Hand Crank Arm

143718411
NO PRIMARY REF14-371-8411: RNCC: 3 | RNVC: 2
RF72-5030: RNCC: 5 | RNVC: 2

5 Aug 1981

5340-14-363-9972
Runner

143639972
121A64-145-01-0: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-371-1529
Angle Bracket

143711529
341A86-1039-22: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-384-1833
Loop Clamp

143841833
3-2603-01-32A: RNCC: 3 | RNVC: 2
3-2603-01-32A: RNCC: 5 | RNVC: 2

4 May 1983

5340-14-493-6486
Loop Holder

144936486
J05085-02-0330P001: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-369-9327
Angle Bracket

143699327
11-534-500: RNCC: 3 | RNVC: 2
11-534-500: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-326-7039
Lock-Release Lever

143267039
405-5-2-3: RNCC: 3 | RNVC: 2
85-687-4715: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-345-2548
Plug Button

143452548
FD1B705-120: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-396-0573
Anchor Strap

143960573
0000147593: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-481-6636
Access Cover

144816636
20662811: RNCC: 3 | RNVC: 2

23 May 1996

5340-14-480-4869
Access Cover

144804869
GFCAA06: RNCC: 3 | RNVC: 2
F0025400: RNCC: 5 | RNVC: 9

14 Mar 1996

5340-14-507-7718
Snap Hook

145077718
390077: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-14-266-0912
Access Cover

142660912
40319A3: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-360-1644
Angle Bracket

143601644
A11A221160170: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-14-338-4960
Anchor Strap

143384960
70351: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-429-1197
Rim Latch

144291197
058310R22318: RNCC: 3 | RNVC: 2
058310R: RNCC: 5 | RNVC: 2

11 Jan 1989

5340-14-523-6795
Butt Hinge

145236795
K1136623: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-530-6901
Mounting Plate

145306901
T533A1120223: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-471-0969
Synchro Clamp

144710969
M4DZ7101962201: RNCC: 3 | RNVC: 2

27 Jul 1994

5340-14-341-1256
Doorstop

143411256
002549080P: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-416-6821
Armature Stop

144166821
412802070015: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-301-5388
Butt Hinge

143015388
LIOB 36: RNCC: 3 | RNVC: 2
LI0B36: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-384-4428
Doorknob

143844428
41X4480: RNCC: 3 | RNVC: 9

4 May 1983

5340-14-526-5837
Runner

145265837
2090-223D507: RNCC: 3 | RNVC: 2
2090-223D507: RNCC: 5 | RNVC: 2

1 Aug 2001

5340-14-520-5902
Mounting Bracket

145205902
32117130132: RNCC: 3 | RNVC: 2
SDM32117130132: RNCC: 5 | RNVC: 9

24 May 2000

5340-14-545-4037
Mounting Bracket

145454037
T720G3002121: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-413-1298
Angle Bracket

144131298
132216: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-14-481-3798
Corner Brace

144813798
261764: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-549-5626
Mounting Plate

145495626
61228208AA: RNCC: 3 | RNVC: 2

14 Apr 2006

5340-14-433-6242
Compression Cup

144336242
5100112465: RNCC: 3 | RNVC: 2
2420500007: RNCC: 5 | RNVC: 2
2420500007: RNCC: 5 | RNVC: 2
2420500007: RNCC: 5 | RNVC: 9

2 Aug 1989

5340-14-341-0821
Anchor Strap

143410821
16397668: RNCC: 3 | RNVC: 2
16397668: RNCC: 3 | RNVC: 9

16 Mar 1977

5340-14-530-0386
Mounting Bracket

145300386
D65490: RNCC: 3 | RNVC: 2

30 Apr 2002

5340-14-042-0200
Pipe Hanger

140420200
121E71-311-34-2: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-519-9063
Access Cover

145199063
47134587: RNCC: 3 | RNVC: 2

19 Apr 2000

5340-14-402-6039
Anchor Strap

144026039
400940: RNCC: 3 | RNVC: 2
BGE400940: RNCC: 5 | RNVC: 2

19 Jul 1985

5340-14-521-7361
Mounting Plate

145217361
010114019P: RNCC: 3 | RNVC: 2

12 Sep 2000

5340-14-473-2014
Protection Bellows

144732014
G116254: RNCC: 3 | RNVC: 2
89473677: RNCC: 5 | RNVC: 2

7 Dec 1994

5340-14-346-1570
Access Cover

143461570
002748014G: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-545-2659
Mounting Bracket

145452659
S215A4052106: RNCC: 3 | RNVC: 2

30 Mar 2005

5340-14-551-5954
Mounting Bracket

145515954
713025: RNCC: 3 | RNVC: 2

9 Oct 2006

5340-14-483-5700
Angle Bracket

144835700
F116310C: RNCC: 3 | RNVC: 2

19 Sep 1996

5340-14-468-8071
Mounting Bracket

144688071
160R742011: RNCC: 3 | RNVC: 2

23 Mar 1994

5340-14-409-1127
Retaining Strap

144091127
641416: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-438-2386
Bumper

144382386
DA2C450740003: RNCC: 3 | RNVC: 2

7 Mar 1990

5340-14-516-6575
Mounting Plate

145166575
46944430: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-14-425-6069
Angle Bracket

144256069
413102000005: RNCC: 3 | RNVC: 2

12 Jul 1988

5340-14-472-2295
Mending Plate

144722295
TB3030112: RNCC: 3 | RNVC: 2

12 Oct 1994

5340-14-303-5833
Angle Bracket

143035833
0264202460: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-517-0882
Mounting Bracket

145170882
95950036: RNCC: 3 | RNVC: 2

3 Nov 1999

5340-14-542-2954
Shelf Bracket

145422954
957039708: RNCC: 3 | RNVC: 2
957039708: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-470-9115
Mending Plate

144709115
T1647AA19: RNCC: 3 | RNVC: 2
T1647AA19: RNCC: 5 | RNVC: 9

13 Jul 1994

5340-14-512-8229
Mounting Bracket

145128229
209079: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-421-3044
Angle Bracket

144213044
0308710270: RNCC: 3 | RNVC: 2
89414752: RNCC: 5 | RNVC: 2

14 Jan 1988

5340-14-501-3158
Mounting Bracket

145013158
10026006: RNCC: 3 | RNVC: 2
F300 0T 025 3567: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-353-6745
Quick Release Pin

143536745
620C6T50: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-447-2898
Retaining Band

144472898
5608561003: RNCC: 3 | RNVC: 2

15 May 1991

5340-14-298-0676
Retaining Strap

142980676
070A751: RNCC: 3 | RNVC: 2
070A751: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-504-1632
Angle Bracket

145041632
8002476Y01: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-416-0454
Retaining Strap

144160454
BJM01533: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-544-2840
Support Hook

145442840
143266: RNCC: 3 | RNVC: 9

17 Jan 2005

5340-14-523-2368
Cover Strip

145232368
RA1M292350361N1: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-443-7214
Mounting Bracket

144437214
20293042: RNCC: 3 | RNVC: 2
20293042: RNCC: 5 | RNVC: 9

5 Dec 1990

5340-14-343-1553
Access Cover

143431553
4770010020: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-14-533-5127
Mounting Plate

145335127
16691788: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-553-3129
Door Hook

145533129
1SH41804356: RNCC: 3 | RNVC: 2

22 Mar 2007

5340-14-472-3742
Pipe Hanger

144723742
PM1A522114002: RNCC: 3 | RNVC: 2
PM1A522114002: RNCC: 5 | RNVC: 2

19 Oct 1994

5340-14-420-6173
Angle Bracket

144206173
612627: RNCC: 3 | RNVC: 2

16 Dec 1987

5340-14-500-1469
Mounting Plate

145001469
EB829: RNCC: 3 | RNVC: 2
F300 0T 024 1483: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-533-6586
Mounting Bracket

145336586
F1262207: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-14-338-4965
Bow Handle

143384965
70369: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-516-0214
Mounting Bracket

145160214
009841080P: RNCC: 3 | RNVC: 2

2 Sep 1999

5340-14-550-9051
Angle Bracket

145509051
RA1M216900711N1: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-526-1806
Lock Bolt

145261806
5000780424: RNCC: 3 | RNVC: 2

6 Jul 2001

5340-14-433-6168
Webbing Strap

144336168
39232932: RNCC: 3 | RNVC: 2
39232932: RNCC: 5 | RNVC: 9

2 Aug 1989

5340-14-254-5656
Retaining Clip

142545656
0605843800: RNCC: 3 | RNVC: 2
0605843800: RNCC: 3 | RNVC: 2
0605843800: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-470-0632
Bridge Clamp

144700632
LN214001WR112: RNCC: 3 | RNVC: 2
RAB3295: RNCC: 5 | RNVC: 2

27 May 1994

5340-14-546-1502
Mounting Bracket

145461502
1002081: RNCC: 3 | RNVC: 2

15 Jun 2005

5340-14-520-6776
Mounting Plate

145206776
2102617: RNCC: 3 | RNVC: 2
SYB0790: RNCC: 5 | RNVC: 2

31 May 2000

5340-14-277-8572
Cover Strip

142778572
3160S25-11-011-51: RNCC: 3 | RNVC: 2
3160S25-11-011RU: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-536-9736
Utility Access Door

145369736
231045-012: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-14-307-2423
Loop Clamp

143072423
3160S43-10-022-51: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-355-3804
Bumper

143553804
121E23-685-05-0: RNCC: 3 | RNVC: 2

19 Mar 1979

5340-14-387-2942
Mounting Plate

143872942
NO PRIMARY REF14-387-2942: RNCC: 3 | RNVC: 2
656712: RNCC: 5 | RNVC: 9

15 Sep 1983

5340-14-523-8266
Clamping Catch

145238266
TL800A-13: RNCC: 3 | RNVC: 2

5 Feb 2001

5340-14-456-9453
Mounting Plate

144569453
3704MRC5-05: RNCC: 3 | RNVC: 2
85-694-8310: RNCC: 6 | RNVC: 9

30 Jul 1992

5340-14-464-9573
Cover Strip

144649573
365A25-0521-2101: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-484-9652
Bridge Clamp

144849652
332A35-2212-20: RNCC: 3 | RNVC: 2

12 Dec 1996

5340-14-531-8558
Mounting Bracket

145318558
15A1311-10: RNCC: 3 | RNVC: 2

23 Sep 2002

5340-14-403-9087
Strap End Clip

144039087
2000070-13-23: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-214-3767
Loop Clamp

142143767
51123105012: RNCC: 3 | RNVC: 2
91304015: RNCC: 5 | RNVC: 2
91304015: RNCC: 5 | RNVC: 2
243191200: RNCC: 5 | RNVC: 2
HB24GE12: RNCC: 5 | RNVC: 9
25GE12: RNCC: 5 | RNVC: 9
24GE12: RNCC: 5 | RNVC: 9
A0021-25GE12: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-555-3774
Retaining Strap

145553774
5853969L02: RNCC: 3 | RNVC: 2

5 Nov 2007

5340-14-554-5390
Blank Panel

145545390
SE10413: RNCC: 3 | RNVC: 2

18 Jul 2007

5340-14-359-5048
Mounting Plate

143595048
21114748-4: RNCC: 3 | RNVC: 2

15 Oct 1979

5340-14-543-6516
Angle Bracket

145436516
F1286841: RNCC: 3 | RNVC: 2

30 Nov 2004

5340-14-350-4708
Angle Bracket

143504708
211123: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-546-7654
Angle Bracket

145467654
RA1M705324311N1: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-14-462-1555
Mounting Plate

144621555
LN214001REPIA12: RNCC: 3 | RNVC: 2
RAB0872: RNCC: 5 | RNVC: 2

7 Apr 1993

5340-14-549-1802
Webbing Strap

145491802
217115: RNCC: 3 | RNVC: 2

7 Mar 2006

5340-14-405-3240
Anchor Strap

144053240
MI22515-4: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-532-4200
Mounting Bracket

145324200
RA1M702436413N1: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-547-1934
Mounting Bracket

145471934
21243: RNCC: 3 | RNVC: 2

4 Oct 2005

5340-14-506-2756
Handwheel

145062756
51834102: RNCC: 3 | RNVC: 2

20 Apr 1998

5340-14-454-6758
Door Handle

144546758
ST442M15P35: RNCC: 3 | RNVC: 2
1211124P006: RNCC: 5 | RNVC: 2
ST442M15P35: RNCC: 5 | RNVC: 9

9 Apr 1992

5340-14-527-0469
Mounting Bracket

145270469
304-068-701-0: RNCC: 3 | RNVC: 2

26 Sep 2001

5340-14-442-6675
Mounting Bracket

144426675
399-003-008-0: RNCC: 3 | RNVC: 2

24 Oct 1990

5340-14-549-9627
Mounting Plate

145499627
2092472-001: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-465-1470
Mounting Plate

144651470
365A23-1619-00: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-519-1810
Mounting Bracket

145191810
725380: RNCC: 3 | RNVC: 2
SK-337A: RNCC: 6 | RNVC: 9

10 Mar 2000

5340-14-501-1664
Mounting Bracket

145011664
019-008-009-00: RNCC: 3 | RNVC: 2
019.008.009.00: RNCC: 3 | RNVC: 2
F300 0T 025 2066: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-464-5148
Metal Grille

144645148
DS209-140-2G260X235X20: RNCC: 3 | RNVC: 2

4 Aug 1993

5340-14-246-7528
Corner Brace

142467528
NO PRIMARY REF14-246-7528: RNCC: 3 | RNVC: 2
8483: RNCC: 5 | RNVC: 9

11 Apr 1990

5340-14-327-3147
Angle Bracket

143273147
3160S73-62-567: RNCC: 3 | RNVC: 2
85-687-3899: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-474-0987
Angle Bracket

144740987
F7987 5219-89: RNCC: 3 | RNVC: 9

25 Jan 1995

5340-14-513-5853
Door Hook

145135853
706A31-111-005: RNCC: 1 | RNVC: 2
040-12100-190: RNCC: 3 | RNVC: 2

24 Mar 1999

5340-14-332-3631
Mending Plate

143323631
341A22-5002-20: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-430-9482
Pipe Hanger

144309482
G230075-22: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-14-532-4505
Mounting Bracket

145324505
341A66-6013-01: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-441-6346
Webbing Strap

144416346
332A91-5800-11: RNCC: 3 | RNVC: 2

5 Sep 1990

5340-14-320-3658
Webbing Strap

143203658
998-00-001: RNCC: 3 | RNVC: 2
3511 131 20441: RNCC: 5 | RNVC: 2
3511-131-20441: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-358-6770
Loop Clamp

143586770
202C272-10: RNCC: 3 | RNVC: 9

7 Sep 1979

5340-14-442-3181
Vent Plug

144423181
332A55-1200-0084: RNCC: 3 | RNVC: 2

10 Oct 1990

5340-14-307-1234
Mending Plate

143071234
3511-210-03051: RNCC: 3 | RNVC: 2
3511 210 03051: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-523-6134
Mounting Bracket

145236134
224E270-00: RNCC: 3 | RNVC: 2
224E270-00: RNCC: 5 | RNVC: 9

31 Jan 2001

5340-14-331-0183
Retaining Strap

143310183
T20-13R403: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-512-3618
Angle Bracket

145123618
PM1A749200029: RNCC: 3 | RNVC: 2
85-695-4042: RNCC: 6 | RNVC: 9

10 Feb 1999

5340-14-254-5354
Mending Plate

142545354
HE60C16A: RNCC: 3 | RNVC: 2
HE60C16A: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-546-8058
Bumper

145468058
45858504: RNCC: 3 | RNVC: 2

23 Aug 2005

5340-14-452-8661
Mounting Bracket

144528661
24697: RNCC: 3 | RNVC: 2
91656740: RNCC: 5 | RNVC: 2

22 Jan 1992

5340-14-527-4955
Mounting Plate

145274955
BMU010130121N1: RNCC: 3 | RNVC: 2

30 Oct 2001

5340-14-433-1500
Bumper

144331500
406010Q: RNCC: 3 | RNVC: 2

11 Jul 1989

5340-14-289-0498
Retaining Band

142890498
FMM004: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-515-4196
Access Cover

145154196
41120047A: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-463-1236
Mounting Plate

144631236
31701: RNCC: 3 | RNVC: 2
95256REP58: RNCC: 5 | RNVC: 2

26 May 1993

5340-14-533-6945
Access Cover

145336945
1431-511D511: RNCC: 3 | RNVC: 2
1431-511D511: RNCC: 5 | RNVC: 9

19 Feb 2003

5340-14-366-8100
Lock-Release Lever

143668100
970040: RNCC: 3 | RNVC: 2
970040: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-414-2856
Clamping Catch

144142856
2CR101P01: RNCC: 3 | RNVC: 2

28 Jan 1987

5340-14-328-7522
Mending Plate

143287522
1030431611: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-396-3767
Expansion Plug

143963767
P106073D: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-454-0683
Mounting Plate

144540683
16293603: RNCC: 3 | RNVC: 2
16293603: RNCC: 5 | RNVC: 9

19 Mar 1992

5340-14-539-5557
Utility Access Door

145395557
SZ09.425.534G: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-320-2933
Access Cover

143202933
0064710480: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-550-5568
Snap Hook

145505568
P06: RNCC: 3 | RNVC: 2
GOUTTE D'EAU P06: RNCC: 5 | RNVC: 2

26 Jun 2006

5340-14-444-9066
Access Cover

144449066
561605: RNCC: 3 | RNVC: 2

28 Jan 1991

5340-14-549-9646
Utility Access Door

145499646
2092512: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-530-9412
Access Cover

145309412
39073707: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-14-325-6494
Angle Bracket

143256494
722A: RNCC: 3 | RNVC: 9

2 Jul 1975

5340-14-518-4589
Mounting Plate

145184589
T537A2005172: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-501-0808
Mounting Bracket

145010808
2028110110: RNCC: 3 | RNVC: 2
SDM2028110110: RNCC: 5 | RNVC: 9
F300 0T 025 1149: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-551-5414
Angle Bracket

145515414
710512: RNCC: 3 | RNVC: 2

28 Sep 2006

5340-14-350-0645
Loop Clamp

143500645
51300001028: RNCC: 3 | RNVC: 2
201N28: RNCC: 5 | RNVC: 2

14 Jun 1978

5340-14-420-1341
Loop Clamp

144201341
DA1D202442500A2: RNCC: 3 | RNVC: 2

18 Nov 1987

5340-14-551-5746
Bumper

145515746
8033143A00: RNCC: 3 | RNVC: 2

5 Oct 2006

5340-14-425-2856
Mounting Plate

144252856
30329226B: RNCC: 3 | RNVC: 2

30 Jun 1988

5340-14-420-4513
Bow Handle

144204513
Z2995: RNCC: 3 | RNVC: 2
SYB3985: RNCC: 5 | RNVC: 2
2995: RNCC: 5 | RNVC: 2

10 Dec 1987

5340-14-261-6279
Mounting Bracket

142616279
STR156941: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-511-8819
Runner

145118819
RL001PE010002: RNCC: 3 | RNVC: 2
RL001PE010002: RNCC: 5 | RNVC: 9

28 Jan 1999

5340-14-509-6807
Cover Strip

145096807
RA1M705232230: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-499-0622
Mounting Plate

144990622
70781J046139: RNCC: 3 | RNVC: 2
46139: RNCC: 3 | RNVC: 2
F300 0T 016 8065: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-517-0304
Loop Clamp

145170304
51520605025: RNCC: 3 | RNVC: 2
21FE25: RNCC: 5 | RNVC: 2

28 Oct 1999

Load More Results