What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 102 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 102 of 446

5340-14-456-1632
Mounting Bracket

144561632
20322871: RNCC: 3 | RNVC: 2
20322871: RNCC: 5 | RNVC: 9

18 Jun 1992

5340-14-472-9816
Mounting Bracket

144729816
ST406M52G106: RNCC: 3 | RNVC: 2

23 Nov 1994

5340-14-403-8762
Runner

144038762
3461858: RNCC: 3 | RNVC: 2

28 Aug 1985

5340-14-487-5555
Mounting Plate

144875555
78736TK050B13XA: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-531-6370
Mounting Plate

145316370
16594379: RNCC: 3 | RNVC: 2

5 Sep 2002

5340-14-524-6082
Mounting Plate

145246082
47139201: RNCC: 3 | RNVC: 2

29 Mar 2001

5340-14-355-7368
Bumper

143557368
A11A222100018: RNCC: 3 | RNVC: 2

19 Mar 1979

5340-14-495-8865
Loop Clamp

144958865
10172566: RNCC: 1 | RNVC: 2
51313107032: RNCC: 3 | RNVC: 2
F300 0T 020 4260: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-338-7602
Retaining Strap

143387602
194883: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-387-1904
Loop Clamp

143871904
51120605010: RNCC: 3 | RNVC: 2
24FE10: RNCC: 5 | RNVC: 2

24 Aug 1983

5340-14-551-4621
Mounting Bracket

145514621
714553: RNCC: 3 | RNVC: 2

25 Sep 2006

5340-14-452-9705
Mounting Plate

144529705
C58644: RNCC: 3 | RNVC: 2

29 Jan 1992

5340-14-502-5337
Spring Holder

145025337
5000806091: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-530-0230
Mounting Bracket

145300230
10379812: RNCC: 3 | RNVC: 2

30 Apr 2002

5340-14-537-4824
Cushioning Pad

145374824
6501DMV120003: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-549-3990
Mounting Plate

145493990
1002342: RNCC: 3 | RNVC: 2

30 Mar 2006

5340-14-432-2474
Clamping Catch

144322474
A0H25898R21: RNCC: 3 | RNVC: 2

31 May 1989

5340-14-495-8475
Mounting Bracket

144958475
702592: RNCC: 3 | RNVC: 2

15 Oct 1997

5340-14-518-4590
Mounting Plate

145184590
T537A2005173: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-471-9410
Mounting Bracket

144719410
GA51468: RNCC: 3 | RNVC: 2

28 Sep 1994

5340-14-254-7769
Retaining Strap

142547769
52075: RNCC: 3 | RNVC: 9

1 Jan 1969

5340-14-500-6420
Loop Clamp

145006420
E64209004000: RNCC: 3 | RNVC: 2
F300 0T 024 6606: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-504-9991
Bridge Clamp

145049991
5010114492: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-423-9494
Angle Bracket

144239494
535917: RNCC: 3 | RNVC: 2

5 May 1988

5340-14-533-8915
Cover Strip

145338915
08-250-929: RNCC: 3 | RNVC: 2
SZ08.250.929: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-543-2381
Mounting Bracket

145432381
10574830: RNCC: 3 | RNVC: 2

7 Oct 2004

5340-14-403-5672
Clamping Catch

144035672
TL100BX5: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-381-2706
Anchor Strap

143812706
CN155AUF1-061314: RNCC: 3 | RNVC: 2
061314: RNCC: 5 | RNVC: 2
BAZ9127: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-519-1882
Rim Latch

145191882
1SH41671206: RNCC: 3 | RNVC: 2

13 Mar 2000

5340-14-403-3249
Loop Clamp

144033249
219763: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-14-413-9254
Mounting Plate

144139254
9160-46: RNCC: 3 | RNVC: 2
86-9160: RNCC: 5 | RNVC: 2

22 Jan 1987

5340-14-542-0474
Self-Locking Insert

145420474
21623401-675: RNCC: 3 | RNVC: 2
502106010007A: RNCC: 3 | RNVC: 9
2162 3401-675: RNCC: 5 | RNVC: 2

2 Jul 2004

5340-14-522-3204
Retaining Strap

145223204
10469304: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-14-385-2306
Access Cover

143852306
IF033-013: RNCC: 3 | RNVC: 9

26 Jul 1983

5340-14-390-0016
Loop Clamp

143900016
0022111233: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-416-3514
Angle Bracket

144163514
15174662: RNCC: 3 | RNVC: 2
15174662: RNCC: 5 | RNVC: 9

3 Jun 1987

5340-14-473-2885
Mounting Bracket

144732885
V7101001: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-542-9753
Loop Clamp

145429753
EN4114F25WH0: RNCC: 2 | RNVC: 2

18 Aug 2004

5340-14-476-0920
Butt Hinge

144760920
222-3018-460: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-508-6408
Angle Bracket

145086408
K15241PC509A: RNCC: 3 | RNVC: 2
K15241PC500AREP09: RNCC: 5 | RNVC: 2

23 Sep 1998

5340-14-489-8458
Retaining Strap

144898458
E4690060: RNCC: 3 | RNVC: 9

26 Aug 1997

5340-14-547-6523
Bumper

145476523
5010559575: RNCC: 3 | RNVC: 2

21 Oct 2005

5340-14-508-6577
Mounting Plate

145086577
14418007: RNCC: 3 | RNVC: 2

23 Sep 1998

5340-14-541-5671
Loop Clamp

145415671
533.7PP: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-522-6008
Mounting Bracket

145226008
3621A007: RNCC: 3 | RNVC: 2

8 Nov 2000

5340-14-539-9959
Runner

145399959
RA1A702406151: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-518-5254
Retaining Clip

145185254
0023448218: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-552-5516
Blank Panel

145525516
82116294000: RNCC: 3 | RNVC: 2

16 Jan 2007

5340-14-293-9659
Control Rod

142939659
K82BA351001: RNCC: 3 | RNVC: 9
81884: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-409-0822
Runner

144090822
4771621830: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-370-3791
Support Hook

143703791
51620438: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-482-9469
Retaining Strap

144829469
215386: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-563-6286
Utility Resilient Mount

145636286
526401SH60: RNCC: 3 | RNVC: 2
FS0002484: RNCC: 6 | RNVC: 9

2 Mar 2010

5340-14-408-9339
Loop Clamp

144089339
031360: RNCC: 3 | RNVC: 2
31360: RNCC: 5 | RNVC: 2
3245060313609: RNCC: 5 | RNVC: 2
LG31360: RNCC: 5 | RNVC: 9
5313017: RNCC: 5 | RNVC: 9

8 Apr 1986

5340-14-440-3096
Mounting Bracket

144403096
20734115: RNCC: 3 | RNVC: 2
20734115: RNCC: 5 | RNVC: 9

11 Jul 1990

5340-14-522-2276
Mounting Bracket

145222276
266796: RNCC: 3 | RNVC: 2
89525694: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-14-375-1828
Loop Clamp

143751828
16006549: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-503-0972
Angle Bracket

145030972
NO PRIMARY REF14-503-0972: RNCC: 3 | RNVC: 2
011040060000: RNCC: 5 | RNVC: 2

7 Jan 1998

5340-14-424-2266
Expansion Plug

144242266
7703075032: RNCC: 3 | RNVC: 2

19 May 1988

5340-14-263-6708
Loop Clamp

142636708
0176-216058: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-370-8540
Threaded Rod End

143708540
1897569517: RNCC: 3 | RNVC: 2
85-691-6911: RNCC: 6 | RNVC: 9

5 Jun 1981

5340-14-530-1274
Access Cover

145301274
121-874-15-10-17-11-03: RNCC: 3 | RNVC: 2

17 May 2002

5340-14-440-1536
Runner

144401536
1600-100-238-01: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-310-7289
Clamping Catch

143107289
GE.40-ZB: RNCC: 3 | RNVC: 2
G40CB: RNCC: 5 | RNVC: 2
GE40CB: RNCC: 5 | RNVC: 2
GE40CBPL70: RNCC: 5 | RNVC: 2
GE40ZB: RNCC: 5 | RNVC: 2
GR40CB: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-484-7243
Clamping Catch

144847243
NO-PRIMARY REF14-484-7243: RNCC: 3 | RNVC: 2
20857906: RNCC: 5 | RNVC: 9
20857906: RNCC: 5 | RNVC: 9

5 Dec 1996

5340-14-490-2877
Mounting Bracket

144902877
J05085-04-0400P005: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-331-7194
Bumper

143317194
121S22-814-09-2M1: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-529-5813
Cover Strip

145295813
330A21-2610-28: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-323-2597
Retaining Strap

143232597
574-410-120-0: RNCC: 3 | RNVC: 2
85-100-5600: RNCC: 6 | RNVC: 9

1 Jan 1975

5340-14-447-3865
Strap Hinge

144473865
55-7-3330: RNCC: 3 | RNVC: 2
91713563: RNCC: 5 | RNVC: 2

15 May 1991

5340-14-231-5963
Loop Clamp

142315963
2982S: RNCC: 3 | RNVC: 9
2982: RNCC: 5 | RNVC: 9
3634P: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-435-1159
Mounting Plate

144351159
065051: RNCC: 3 | RNVC: 2

18 Oct 1989

5340-14-382-2481
Expansion Plug

143822481
0000146978: RNCC: 3 | RNVC: 2
146978: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-519-8452
Friction Catch

145198452
16-7-3522: RNCC: 3 | RNVC: 2

12 Apr 2000

5340-14-553-4599
Angle Bracket

145534599
DA1N202760400: RNCC: 3 | RNVC: 2

5 Apr 2007

5340-14-381-8306
Pipe Hanger

143818306
045S03-614838X: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-503-4913
Mounting Plate

145034913
3026729: RNCC: 3 | RNVC: 2
3026729: RNCC: 5 | RNVC: 9

14 Jan 1998

5340-14-384-6833
Angle Bracket

143846833
16764186: RNCC: 3 | RNVC: 2
16764186: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-462-1261
Loop Clamp

144621261
LN400018 F6REPA1: RNCC: 3 | RNVC: 2
RAB0802: RNCC: 5 | RNVC: 2

6 Apr 1993

5340-14-549-5508
Mounting Plate

145495508
EPIPRE E370356: RNCC: 3 | RNVC: 2

13 Apr 2006

5340-14-525-8196
Angle Bracket

145258196
N108131: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-378-6461
Mounting Plate

143786461
16046045A: RNCC: 3 | RNVC: 2
16046045A: RNCC: 5 | RNVC: 9

11 Aug 1982

5340-14-378-4419
Access Cover

143784419
GA29574: RNCC: 3 | RNVC: 2

11 Aug 1982

5340-14-517-4500
Synchro Clamp

145174500
T713A0001249: RNCC: 3 | RNVC: 2

15 Dec 1999

5340-14-365-1263
Rod End Clevis

143651263
117931: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-14-525-6915
Mounting Bracket

145256915
20 242 160 7340: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-473-1858
Access Cover

144731858
11466: RNCC: 3 | RNVC: 2

7 Dec 1994

5340-14-554-4044
Bumper

145544044
29838: RNCC: 3 | RNVC: 2

2 Jul 2007

5340-14-531-5684
Access Cover

145315684
1329-257C509: RNCC: 3 | RNVC: 2

28 Aug 2002

5340-14-375-2922
Angle Bracket

143752922
136-156: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-384-5650
Anchor Strap

143845650
148191-31: RNCC: 3 | RNVC: 2

2 Jun 1983

5340-14-311-8791
Access Cover

143118791
0249157550: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-496-8787
Access Cover

144968787
10736501: RNCC: 3 | RNVC: 2
F300 0T 022 2279: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-533-8394
Utility Access Door

145338394
56293788: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-483-4722
Access Cover

144834722
47029630: RNCC: 3 | RNVC: 2

12 Sep 1996

5340-14-486-6407
Access Cover

144866407
16298668: RNCC: 3 | RNVC: 2
16298668: RNCC: 5 | RNVC: 9

26 Mar 1997

5340-14-488-6205
Dashpot

144886205
413027/920: RNCC: 3 | RNVC: 2

22 May 1997

5340-14-474-5364
Mounting Bracket

144745364
2014898C: RNCC: 3 | RNVC: 2

22 Feb 1995

5340-14-421-2835
Plug Button

144212835
T0UM75P52P: RNCC: 3 | RNVC: 2

14 Jan 1988

5340-14-312-8307
Mounting Bracket

143128307
0249857350: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-427-8172
Access Cover

144278172
91131209: RNCC: 3 | RNVC: 2

11 Nov 1988

5340-14-350-4200
Angle Bracket

143504200
190567: RNCC: 3 | RNVC: 2
MAF0001003430: RNCC: 6 | RNVC: 9

12 Jul 1978

5340-14-399-9954
Anchor Strap

143999954
605360: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-452-4726
Dashpot Piston

144524726
1061080013: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-344-2508
Angle Bracket

143442508
28187: RNCC: 3 | RNVC: 2

10 Aug 1977

5340-14-517-8641
Rod End Clevis

145178641
92 020 02 0201: RNCC: 3 | RNVC: 2

14 Jan 2000

5340-14-363-0638
Anchor Strap

143630638
573905164: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-14-379-6855
Anchor Strap

143796855
46019: RNCC: 3 | RNVC: 9

20 Oct 1982

5340-14-536-5114
Expansion Shield

145365114
2395D: RNCC: 3 | RNVC: 2
SC086128: RNCC: 6 | RNVC: 9

28 Aug 2003

5340-14-551-3395
Retaining Strap

145513395
RA1A701386161N1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-514-0705
Runner

145140705
RA1M702406155: RNCC: 3 | RNVC: 2

22 Apr 1999

5340-14-394-6367
Mounting Plate

143946367
79090384: RNCC: 3 | RNVC: 2
79090384: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-461-5167
Angle Bracket

144615167
008442001P: RNCC: 3 | RNVC: 2

15 Mar 1993

5340-14-031-8294
Bumper

140318294
5416420F: RNCC: 3 | RNVC: 2
5416420: RNCC: 5 | RNVC: 2

5 Jul 1980

5340-14-541-5108
Angle Bracket

145415108
1091235: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-381-6559
Rim Latch

143816559
155: RNCC: 3 | RNVC: 9

25 Jan 1983

5340-14-411-4911
Rim Lock Set

144114911
H2DROITE: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-528-5388
Mounting Bracket

145285388
5618019A: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-522-3755
Bumper

145223755
10022467: RNCC: 3 | RNVC: 2

25 Oct 2000

5340-14-450-2128
Angle Bracket

144502128
5000987758: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-434-2057
Mounting Plate

144342057
552512: RNCC: 3 | RNVC: 2

12 Sep 1989

5340-14-501-6831
Mounting Plate

145016831
39251731: RNCC: 3 | RNVC: 2
39251731: RNCC: 3 | RNVC: 9

5 Nov 1997

5340-14-533-6590
Detent Plunger

145336590
F1262220: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-14-418-2336
Mounting Plate

144182336
16196162: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-355-8953
Bumper

143558953
M223B00007: RNCC: 3 | RNVC: 2

5 Apr 1979

5340-14-549-5696
Mounting Bracket

145495696
DS1P202710410: RNCC: 3 | RNVC: 2

18 Apr 2006

5340-14-514-8530
Mounting Bracket

145148530
6945705: RNCC: 3 | RNVC: 2
221D010109C: RNCC: 5 | RNVC: 2

22 Jun 1999

5340-14-327-1334
Loop Clamp

143271334
16128176: RNCC: 3 | RNVC: 2
16128176: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-560-6163
Utility Resilient Mount

145606163
3259659: RNCC: 3 | RNVC: 2
V6841484: RNCC: 5 | RNVC: 2
CV150506: RNCC: 5 | RNVC: 2
V6841484: RNCC: 5 | RNVC: 2

5 May 2009

5340-14-396-3763
Expansion Plug

143963763
P106073E: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-459-8163
Bow Handle

144598163
38011224: RNCC: 3 | RNVC: 2
38011224: RNCC: 5 | RNVC: 9

17 Dec 1992

5340-14-330-3061
Bumper

143303061
810022: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-507-7755
Mounting Bracket

145077755
29483251: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-14-463-5445
Mounting Bracket

144635445
3418852: RNCC: 3 | RNVC: 2

17 Jun 1993

5340-14-369-9691
Access Cover

143699691
35804: RNCC: 3 | RNVC: 9

18 May 1981

5340-14-472-5391
Angle Bracket

144725391
9301190040: RNCC: 3 | RNVC: 2

28 Oct 1994

5340-14-250-3290
Retaining Strap

142503290
151727: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-446-5011
Rod End Clevis

144465011
81452446: RNCC: 3 | RNVC: 2

20 Mar 1991

5340-14-436-8496
Detent Plunger

144368496
DA2C297630: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-394-1652
Luggage Lock

143941652
509AN: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-509-2176
Mounting Plate

145092176
46237150: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-358-3988
Mending Plate

143583988
388042: RNCC: 3 | RNVC: 2

13 Aug 1979

5340-14-541-3283
Mounting Bracket

145413283
311720: RNCC: 3 | RNVC: 2
KP12: RNCC: 5 | RNVC: 2

27 May 2004

5340-14-549-1865
Bumper

145491865
51.03346: RNCC: 3 | RNVC: 2

7 Mar 2006

5340-14-322-3500
Loop Clamp

143223500
M115159: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-544-3341
Butt Hinge

145443341
AMPC GENE E222307: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-14-521-3037
Mounting Bracket

145213037
10594034: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-14-305-4052
Loop Clamp

143054052
512153050191: RNCC: 3 | RNVC: 2
30S19: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-538-7727
Handwheel

145387727
NGM0011040318472: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-434-3052
Mounting Bracket

144343052
553308: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-295-1118
Corner Brace

142951118
277531: RNCC: 3 | RNVC: 2
277531: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-321-0086
Access Cover

143210086
15436576: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-455-8648
Angle Bracket

144558648
564364: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-431-4239
Vent Plug

144314239
3511 191 35351: RNCC: 3 | RNVC: 2

19 Apr 1989

5340-14-544-7285
Mounting Bracket

145447285
61039269AA: RNCC: 3 | RNVC: 2

21 Feb 2005

5340-14-520-5263
Bumper

145205263
46061901: RNCC: 3 | RNVC: 2
46061901: RNCC: 5 | RNVC: 9

22 May 2000

5340-14-360-9030
Angle Bracket

143609030
79076857: RNCC: 3 | RNVC: 2
28011085: RNCC: 5 | RNVC: 2
79076857: RNCC: 5 | RNVC: 9

19 Dec 1979

5340-14-519-4987
Blank Panel

145194987
10518080: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-459-4039
Mounting Plate

144594039
158A100264: RNCC: 3 | RNVC: 2
A100264: RNCC: 5 | RNVC: 2
158A100264: RNCC: 5 | RNVC: 9

26 Nov 1992

5340-14-419-2167
Retaining Strap

144192167
0319737120: RNCC: 3 | RNVC: 2

16 Oct 1987

5340-14-510-7894
Runner

145107894
6005000183: RNCC: 3 | RNVC: 2

13 Nov 1998

5340-14-464-3541
Mounting Bracket

144643541
2214: RNCC: 3 | RNVC: 2
89296903: RNCC: 5 | RNVC: 2

28 Jul 1993

5340-14-511-6177
Mounting Plate

145116177
RA1M701116166: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-540-8006
Mounting Plate

145408006
61027255AA: RNCC: 3 | RNVC: 2

23 Apr 2004

5340-14-523-0782
Mounting Bracket

145230782
U31229: RNCC: 3 | RNVC: 2
8022478R00: RNCC: 5 | RNVC: 2

20 Dec 2000

5340-14-555-2160
Mounting Bracket

145552160
RA1M702436115A1N1: RNCC: 3 | RNVC: 2

10 Oct 2007

5340-14-527-1178
Mounting Bracket

145271178
10632714: RNCC: 3 | RNVC: 2

3 Oct 2001

5340-14-532-2235
Mounting Plate

145322235
010409041P: RNCC: 3 | RNVC: 2

21 Oct 2002

5340-14-301-0535
Retaining Strap

143010535
1060630029: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-381-7784
Mounting Plate

143817784
20188681: RNCC: 3 | RNVC: 2
20188681: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-361-5647
Pipe Hanger

143615647
24055005800: RNCC: 3 | RNVC: 2
240550058: RNCC: 5 | RNVC: 9

24 Jan 1980

5340-14-480-4865
Mounting Plate

144804865
GFCAA01: RNCC: 3 | RNVC: 2
F0025100: RNCC: 5 | RNVC: 9

14 Mar 1996

5340-14-355-3878
Synchro Clamp

143553878
S3798DG: RNCC: 3 | RNVC: 2

19 Mar 1979

5340-14-530-8421
Mounting Bracket

145308421
5804304E00: RNCC: 3 | RNVC: 2
5804304E00: RNCC: 5 | RNVC: 2

9 Jul 2002

5340-14-429-9934
Mounting Bracket

144299934
225661: RNCC: 3 | RNVC: 2
89279594: RNCC: 5 | RNVC: 2

22 Feb 1989

5340-14-316-5152
Bumper

143165152
321A21-0371-05: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-226-2035
Bumper

142262035
DHS751-111.06: RNCC: 3 | RNVC: 2
DHS751-111-06: RNCC: 5 | RNVC: 2
3130S76-12-002: RNCC: 5 | RNVC: 2
N7640260006: RNCC: 5 | RNVC: 9
85-693-1176: RNCC: 6 | RNVC: 9

1 Jan 1966

5340-14-230-7335
Handwheel

142307335
GSM137-001F17-2C1: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-343-6273
Access Cover

143436273
330A61-2223-00: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-14-314-3887
Webbing Strap

143143887
998-10-002: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-501-4965
Handwheel

145014965
NO PRIMARY REF14-501-4965: RNCC: 3 | RNVC: 2
NNP5340848465592: RNCC: 5 | RNVC: 9

29 Oct 1997

5340-14-472-8861
Mounting Bracket

144728861
332A61-2828-00: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-440-3198
Bumper

144403198
332A58-4582-20: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-498-3161
Loop Clamp

144983161
PAA73-10-010-13: RNCC: 3 | RNVC: 2
91952649: RNCC: 3 | RNVC: 2
F300 0T 004 7826: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-469-0570
Angle Bracket

144690570
36-7418-021: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-14-489-1899
Mounting Bracket

144891899
22-015-100: RNCC: 3 | RNVC: 2
22-015-100: RNCC: 5 | RNVC: 2

2 Jul 1997

5340-14-552-7509
Mounting Plate

145527509
THNH1-992277-20: RNCC: 3 | RNVC: 2

29 Jan 2007

5340-14-450-2213
Loop Clamp

144502213
Y8211149: RNCC: 3 | RNVC: 2
RP14: RNCC: 5 | RNVC: 2
91639222: RNCC: 5 | RNVC: 2

25 Sep 1991

5340-14-522-9670
Mounting Bracket

145229670
ST159-2M752P83: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-14-425-2998
Mounting Plate

144252998
30329266G: RNCC: 3 | RNVC: 2

30 Jun 1988

5340-14-506-2960
Retaining Strap

145062960
38511722: RNCC: 3 | RNVC: 2
38511722: RNCC: 5 | RNVC: 9

22 Apr 1998

5340-14-364-4917
Rod End Clevis

143644917
5000500038: RNCC: 3 | RNVC: 2
5000500038: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-375-1649
Anchor Strap

143751649
0000486658: RNCC: 3 | RNVC: 2
486658: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-207-0507
Access Cover

142070507
0000351738: RNCC: 3 | RNVC: 2
0000351738: RNCC: 5 | RNVC: 9
351738: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-521-3008
Mounting Bracket

145213008
10491327: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-14-372-2066
Rod End Clevis

143722066
25034: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-480-0492
Locking Stay

144800492
10271092: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-441-5429
Access Cover

144415429
852062: RNCC: 3 | RNVC: 2

3 Sep 1990

5340-14-472-9303
Access Cover

144729303
47028554: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-471-7791
Access Cover

144717791
P02810: RNCC: 3 | RNVC: 2

14 Sep 1994

5340-14-480-4877
Mounting Bracket

144804877
GFACA15: RNCC: 3 | RNVC: 2
F0027700: RNCC: 5 | RNVC: 9

14 Mar 1996

5340-14-524-4169
Access Cover

145244169
FH206003200: RNCC: 3 | RNVC: 2

15 Mar 2001

5340-14-406-2091
Rod End Clevis

144062091
R12608A6ADZ: RNCC: 2 | RNVC: 2

8 Jan 1986

5340-14-325-5408
Access Cover

143255408
714853: RNCC: 3 | RNVC: 2
5171485300: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-473-9324
Access Cover

144739324
38222942: RNCC: 3 | RNVC: 2
38222942: RNCC: 5 | RNVC: 9

18 Jan 1995

5340-14-515-5179
Access Cover

145155179
9401486: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-519-2669
Access Cover

145192669
3511 111 50261: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-474-2106
Access Door Hinge

144742106
76190900200: RNCC: 3 | RNVC: 2

1 Feb 1995

5340-14-369-9373
Retaining Strap

143699373
11-379-800: RNCC: 3 | RNVC: 2
11-379-800: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-520-4749
Utility Access Door

145204749
19203373: RNCC: 3 | RNVC: 2
19203373: RNCC: 5 | RNVC: 9

17 May 2000

5340-14-409-0761
Webbing Strap

144090761
4771621700: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-441-4227
Mounting Plate

144414227
PM1A728216020A1: RNCC: 3 | RNVC: 2
PM1A728216020A1: RNCC: 5 | RNVC: 2

22 Aug 1990

5340-14-488-2484
Leakproof Seal Plug

144882484
R43601REP13: RNCC: 3 | RNVC: 2

23 Apr 1997

5340-14-435-1041
Angle Bracket

144351041
3005258: RNCC: 3 | RNVC: 2

18 Oct 1989

5340-14-550-7576
Pipe Hanger

145507576
RA1A702436161: RNCC: 3 | RNVC: 2

12 Jul 2006

5340-14-555-8645
Mounting Bracket

145558645
82051125000: RNCC: 3 | RNVC: 2

19 Dec 2007

5340-14-382-9614
Retaining Strap

143829614
BAZ8821: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-445-5271
Angle Bracket

144455271
232934: RNCC: 3 | RNVC: 2
89289572: RNCC: 5 | RNVC: 2

14 Feb 1991

5340-14-549-8756
Angle Bracket

145498756
2093238: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-455-4232
Mounting Plate

144554232
45614825: RNCC: 3 | RNVC: 9

21 May 1992

5340-14-442-0291
Locking Stay

144420291
332A92-1144-11: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-367-6391
Mending Plate

143676391
F10232-06: RNCC: 3 | RNVC: 2
E7035-580: RNCC: 5 | RNVC: 2
F10232-06: RNCC: 5 | RNVC: 2

19 Jan 1981

5340-14-446-0849
Mounting Plate

144460849
61-75-166-3: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-520-9043
Lock Bolt

145209043
10470174: RNCC: 3 | RNVC: 2

21 Jun 2000

5340-14-392-8593
Access Cover

143928593
225191: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-536-1016
Access Cover

145361016
803228550116: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-460-9985
Utility Access Door

144609985
5100266B: RNCC: 3 | RNVC: 2
5000991480: RNCC: 5 | RNVC: 2
5100266: RNCC: 5 | RNVC: 9

17 Feb 1993

5340-14-382-5653
Access Cover

143825653
16763286: RNCC: 3 | RNVC: 2
16763286: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-502-5204
Access Cover

145025204
5000676440: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-504-0210
Bumper

145040210
34246: RNCC: 3 | RNVC: 2

4 Feb 1998

5340-14-375-2793
Anchor Strap

143752793
5000535780: RNCC: 3 | RNVC: 2
5000535780: RNCC: 5 | RNVC: 9

26 Feb 1982

5340-14-394-6469
Access Cover

143946469
79111381: RNCC: 3 | RNVC: 2
79111381: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-539-6834
Access Cover

145396834
214519: RNCC: 3 | RNVC: 2

28 Jan 2004

5340-14-394-7008
Metal Grille

143947008
16920303: RNCC: 3 | RNVC: 9

28 Aug 1984

5340-14-341-1391
Access Cover

143411391
311869-1: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-546-6267
Angle Bracket

145466267
RA1M706216131N1: RNCC: 3 | RNVC: 2

21 Jul 2005

5340-14-546-3016
Mounting Bracket

145463016
10534473: RNCC: 3 | RNVC: 2

22 Jun 2005

5340-14-546-7831
Mounting Bracket

145467831
0308252: RNCC: 3 | RNVC: 2

19 Aug 2005

5340-14-535-2405
Hand Crank Arm

145352405
6401ORC110001: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-382-4123
Threaded Rod End

143824123
1016511: RNCC: 3 | RNVC: 2
S101SRC5: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-550-3369
Mounting Plate

145503369
2716064690: RNCC: 3 | RNVC: 2

16 Jun 2006

5340-14-509-2224
Angle Bracket

145092224
PLNB3312: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-408-4428
Control Rod

144084428
RSM38141: RNCC: 3 | RNVC: 2

27 Mar 1986

5340-14-526-4499
Pipe Hanger

145264499
RA1M704245430: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-371-9636
Clamping Catch

143719636
8812044411: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-372-2794
Mending Plate

143722794
225250: RNCC: 3 | RNVC: 2
225250: RNCC: 5 | RNVC: 9

1 Sep 1981

5340-14-375-8920
Angle Bracket

143758920
5000115090: RNCC: 3 | RNVC: 2
5000115090: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-567-1964
Utility Access Door

145671964
P033954: RNCC: 3 | RNVC: 2

21 Feb 2011

5340-14-268-9929
Handwheel

142689929
MAT137-005F4ACIER: RNCC: 3 | RNVC: 2
553-000MA060F7-1C1: RNCC: 5 | RNVC: 2
GSM137-007F8ACIER: RNCC: 5 | RNVC: 2
GSM137-07F08ACIER: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-453-4263
Elastic Strap

144534263
NO PRIMARY REF14-453-4263: RNCC: 3 | RNVC: 2
235240-1: RNCC: 5 | RNVC: 2

19 Feb 1992

5340-14-534-1307
Mounting Bracket

145341307
332P68-1666-0001: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-516-9893
Utility Access Door

145169893
CRB201310470N1: RNCC: 3 | RNVC: 2
CRB201-310-470N1: RNCC: 5 | RNVC: 2

28 Oct 1999

5340-14-252-2121
Leaf Spring

142522121
80001-48: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-216-6878
Retaining Strap

142166878
NO PRIMARY REF14-216-6878: RNCC: 3 | RNVC: 2
60910: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-395-6149
Timber Ring

143956149
VTR321-22: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-376-5939
Anchor Strap

143765939
7551692080: RNCC: 3 | RNVC: 2
75516920: RNCC: 5 | RNVC: 2
524-33-002: RNCC: 5 | RNVC: 2
524-33-002: RNCC: 5 | RNVC: 9
52433002: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-513-8166
Bow Handle

145138166
M643/140: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-231-1860
Access Cover

142311860
2342-134: RNCC: 3 | RNVC: 2
2342-134: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-480-4327
Mounting Plate

144804327
399-005-058-0: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-522-0713
Caster Wheel

145220713
8502194-2D: RNCC: 3 | RNVC: 2

3 Oct 2000

5340-14-374-6299
Runner

143746299
10-732439REP2: RNCC: 3 | RNVC: 2
10-732438REP2: RNCC: 5 | RNVC: 2

30 Jan 1982

5340-14-376-5603
Strap End Clip

143765603
LRAC89F1-116585: RNCC: 3 | RNVC: 2
116585: RNCC: 5 | RNVC: 2

28 Apr 1982

5340-14-467-7504
Loop Clamp

144677504
312-04812-001: RNCC: 3 | RNVC: 2

27 Jan 1994

5340-14-246-8828
Turnbuckle Body

142468828
649-91-14: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-489-6567
Blank Panel

144896567
332A27-1415-02: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-501-7910
Dashpot

145017910
NO PRIMARY REF14-501-7910: RNCC: 3 | RNVC: 2
300 017 134: RNCC: 5 | RNVC: 9
4548 711 062 001: RNCC: 5 | RNVC: 9
F300 0T 001 0472: RNCC: 6 | RNVC: 9

10 Nov 1997

5340-14-325-2438
Mending Plate

143252438
3160S25-28-030-1: RNCC: 3 | RNVC: 2
85-684-5250: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-397-1772
Angle Bracket

143971772
NO PRIMARY REF14-397-1772: RNCC: 3 | RNVC: 2
B128ABB16: RNCC: 5 | RNVC: 9

1 Dec 1984

5340-14-473-4243
Bumper

144734243
200-123-240: RNCC: 3 | RNVC: 9
85-695-2997: RNCC: 6 | RNVC: 9

13 Dec 1994

5340-14-443-8457
Synchro Clamp

144438457
FA1E706-92848: RNCC: 3 | RNVC: 2

10 Dec 1990

5340-14-307-2033
Swivel Caster

143072033
109-4NR: RNCC: 3 | RNVC: 9
8811111024: RNCC: 5 | RNVC: 2
MPR109-4NR: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-384-9495
Loop Clamp

143849495
4071-241A200: RNCC: 3 | RNVC: 2
4071-241A200: RNCC: 5 | RNVC: 2

2 Jun 1983

5340-14-539-6822
Mounting Bracket

145396822
192260: RNCC: 3 | RNVC: 2

28 Jan 2004

5340-14-483-0067
Pipe Hanger

144830067
PM1A742734130: RNCC: 3 | RNVC: 2
PM1A742734130: RNCC: 5 | RNVC: 2

1 Aug 1996

5340-14-445-0524
Loop Clamp

144450524
533093: RNCC: 3 | RNVC: 2

31 Jan 1991

5340-14-477-7928
Pipe Hanger

144777928
000483: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-14-544-3250
Mounting Bracket

145443250
AMPC GENE E223504: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-14-414-2064
Anchor Strap

144142064
969207: RNCC: 3 | RNVC: 2
969207: RNCC: 5 | RNVC: 9

22 Jan 1987

5340-14-527-0265
Access Cover

145270265
3800373M1: RNCC: 3 | RNVC: 2

26 Sep 2001

5340-14-547-8664
Angle Bracket

145478664
5010626213: RNCC: 3 | RNVC: 2

21 Nov 2005

5340-14-514-5259
Access Cover

145145259
10518085: RNCC: 3 | RNVC: 2

26 May 1999

5340-14-282-8563
Loop Clamp

142828563
511119050221: RNCC: 3 | RNVC: 2
35P22: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-529-0607
Mounting Bracket

145290607
10636894: RNCC: 3 | RNVC: 2

6 Mar 2002

5340-14-532-8117
Bow Handle

145328117
21130: RNCC: 3 | RNVC: 2

17 Dec 2002

5340-14-530-1069
Mounting Bracket

145301069
351119267251: RNCC: 3 | RNVC: 2

14 May 2002

5340-14-461-3913
Loop Clamp

144613913
NSA5516C15NV: RNCC: 3 | RNVC: 2
NSA5516C15NV: RNCC: 5 | RNVC: 2

10 Mar 1993

5340-14-388-7255
Rod End Clevis

143887255
QM966: RNCC: 3 | RNVC: 2

3 Nov 1983

5340-14-544-7161
Utility Access Door

145447161
963133908: RNCC: 3 | RNVC: 2

18 Feb 2005

5340-14-483-4472
Access Cover

144834472
C102966: RNCC: 3 | RNVC: 2

12 Sep 1996

5340-14-420-1069
Access Cover

144201069
P069688: RNCC: 3 | RNVC: 2

18 Nov 1987

5340-14-502-7964
Anchor Strap

145027964
7W4539: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-437-4231
Mounting Plate

144374231
3005060: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-14-369-9057
Access Cover

143699057
22373927: RNCC: 3 | RNVC: 2
22373927: RNCC: 5 | RNVC: 2

18 May 1981

5340-14-476-6717
Access Cover

144766717
45463137: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-14-472-2019
Mounting Bracket

144722019
DRV19052: RNCC: 3 | RNVC: 2
DRV19052: RNCC: 5 | RNVC: 9

12 Oct 1994

5340-14-463-1832
Rod End Clevis

144631832
562003: RNCC: 3 | RNVC: 2

26 May 1993

5340-14-387-5473
Rod End Clevis

143875473
137688: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-14-410-1632
Access Cover

144101632
543653: RNCC: 3 | RNVC: 2

4 Jun 1986

5340-14-461-9515
Rod End Clevis

144619515
T700A5280014000: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-420-7034
Angle Bracket

144207034
39529269: RNCC: 3 | RNVC: 2
39529269: RNCC: 5 | RNVC: 9

16 Dec 1987

5340-14-499-4620
Bumper

144994620
3802683M00: RNCC: 3 | RNVC: 2
3802683M00: RNCC: 3 | RNVC: 2
3802683M00: RNCC: 5 | RNVC: 9
F300 0T 022 4598: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-357-5384
Angle Bracket

143575384
A11A233160020: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-360-3367
Access Cover

143603367
NBC10AHE406: RNCC: 3 | RNVC: 2

23 Nov 1979

5340-14-357-0260
Runner

143570260
0852954500: RNCC: 3 | RNVC: 2
0852954500: RNCC: 5 | RNVC: 9

7 Jun 1979

5340-14-555-6152
Mounting Plate

145556152
107048: RNCC: 3 | RNVC: 2
107048: RNCC: 5 | RNVC: 2

3 Dec 2007

5340-14-436-6835
Rod End Clevis

144366835
DA2C794214: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-357-0443
Angle Bracket

143570443
387863: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-532-4414
Access Cover

145324414
40188745: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-479-1178
Mending Plate

144791178
E05300509: RNCC: 3 | RNVC: 2

13 Dec 1995

5340-14-533-9825
Mounting Bracket

145339825
10653067: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-458-5104
Bumper

144585104
6270-99222: RNCC: 3 | RNVC: 2

23 Oct 1992

5340-14-320-4607
Retaining Strap

143204607
458249: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-508-5253
Mounting Bracket

145085253
10383769: RNCC: 3 | RNVC: 2

16 Sep 1998

5340-14-486-6116
Butt Hinge

144866116
A10-12-927-19-2: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-14-472-9280
Retaining Strap

144729280
29462225: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-518-1826
Mounting Bracket

145181826
5010146353: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-320-2838
Access Cover

143202838
P702493: RNCC: 3 | RNVC: 2
702493: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-551-3423
Angle Bracket

145513423
RA1M250000527A1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-543-9735
Utility Access Door

145439735
19212071: RNCC: 3 | RNVC: 2

19 Dec 2004

5340-14-394-9181
Access Cover

143949181
20731029: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-346-8787
Access Cover

143468787
26425845: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-14-415-7995
Anchor Strap

144157995
15450419: RNCC: 3 | RNVC: 2
15450419: RNCC: 5 | RNVC: 9

18 May 1987

5340-14-348-6798
Access Cover

143486798
225859: RNCC: 3 | RNVC: 2
225859: RNCC: 5 | RNVC: 9

19 Apr 1978

5340-14-534-4916
Mounting Bracket

145344916
6501GSP150001: RNCC: 3 | RNVC: 2

26 Mar 2003

5340-14-518-5991
Mounting Bracket

145185991
5010064204: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-357-0315
Anchor Strap

143570315
0000647196: RNCC: 3 | RNVC: 2
0000647196: RNCC: 5 | RNVC: 9
647196: RNCC: 5 | RNVC: 9

7 Jun 1979

5340-14-481-4008
Mounting Bracket

144814008
47135322: RNCC: 3 | RNVC: 2

3 May 1996

5340-14-547-1441
Lock Bolt

145471441
51332: RNCC: 3 | RNVC: 2

28 Sep 2005

5340-14-397-9295
Angle Bracket

143979295
253574: RNCC: 3 | RNVC: 2
253574: RNCC: 5 | RNVC: 9

31 Jan 1985

5340-14-446-1422
Angle Bracket

144461422
39959463: RNCC: 3 | RNVC: 2
39959463: RNCC: 5 | RNVC: 9

6 Mar 1991

5340-14-364-8672
Butt Hinge

143648672
36G90X60CAD: RNCC: 3 | RNVC: 2
RAR5835: RNCC: 5 | RNVC: 2

2 Sep 1980

5340-14-453-4730
Access Cover

144534730
B13-5-5: RNCC: 3 | RNVC: 2
RAR3489: RNCC: 5 | RNVC: 2

21 Feb 1992

5340-14-472-3421
Retaining Band

144723421
14120: RNCC: 3 | RNVC: 2

19 Oct 1994

5340-14-358-6008
Loop Clamp

143586008
51213105024: RNCC: 3 | RNVC: 2
20G24: RNCC: 5 | RNVC: 2

7 Sep 1979

5340-14-353-0477
Angle Bracket

143530477
A11A231560010: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-350-5108
Retaining Strap

143505108
45355: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-398-8054
Retaining Strap

143988054
5000498063: RNCC: 3 | RNVC: 2
5000498063: RNCC: 5 | RNVC: 9

20 Feb 1985

5340-14-553-4742
Mounting Plate

145534742
0319100490: RNCC: 3 | RNVC: 2

5 Apr 2007

5340-14-490-2439
Loop Clamp

144902439
MS21919DG5: RNCC: 3 | RNVC: 2
0236105P00: RNCC: 5 | RNVC: 2

24 Sep 1997

5340-14-437-3647
Anchor Strap

144373647
05300501: RNCC: 3 | RNVC: 2
D05300501: RNCC: 5 | RNVC: 2
F300 0T 006 6626: RNCC: 6 | RNVC: 9

31 Jan 1990

5340-14-432-9785
Loop Clamp

144329785
51311902011: RNCC: 3 | RNVC: 2
Z00.N7141382111: RNCC: 5 | RNVC: 2
211901100: RNCC: 5 | RNVC: 2
21P11: RNCC: 5 | RNVC: 2

5 Jul 1989

5340-14-468-7151
Retaining Strap

144687151
PU0049AE01: RNCC: 3 | RNVC: 2

16 Mar 1994

5340-14-511-7061
Webbing Strap

145117061
R6182A050: RNCC: 3 | RNVC: 2

12 Jan 1999

5340-14-537-0537
Loop Clamp

145370537
3651038: RNCC: 3 | RNVC: 2
SYQ3766: RNCC: 5 | RNVC: 2
3651038: RNCC: 5 | RNVC: 9

24 Sep 2003

5340-14-392-8532
Angle Bracket

143928532
224381: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-335-3560
Access Cover

143353560
196929: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-515-2400
Access Cover

145152400
3534416501: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-526-2531
Mounting Bracket

145262531
10574323: RNCC: 3 | RNVC: 2

11 Jul 2001

5340-14-404-7175
Access Cover

144047175
20780718: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-446-6667
Mounting Bracket

144466667
61017: RNCC: 3 | RNVC: 2

9 Apr 1991

5340-14-539-5565
Access Cover

145395565
SZ09.704.700: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-536-0685
Mounting Bracket

145360685
803238130713: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-411-4027
Wiring Harness

144114027
A11A704109070: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-550-4890
Angle Bracket

145504890
RA1M703854171N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-556-0220
Mounting Plate

145560220
0319141340: RNCC: 3 | RNVC: 2

21 Jan 2008

5340-14-341-0327
Bumper

143410327
0000469572: RNCC: 3 | RNVC: 2
469572: RNCC: 5 | RNVC: 9

16 Mar 1977

5340-14-574-5812
Utility Resilient Mount

145745812
521581: RNCC: 3 | RNVC: 2

1 Feb 2013

5340-14-377-5714
Loop Clamp

143775714
356608: RNCC: 3 | RNVC: 2
356608: RNCC: 5 | RNVC: 9

10 Jun 1982

5340-14-459-4594
Angle Bracket

144594594
LN400011F7REPA2: RNCC: 3 | RNVC: 2
LN400011F4REPA2: RNCC: 5 | RNVC: 2

1 Dec 1992

5340-14-511-7075
Elastic Strap

145117075
R6700A050: RNCC: 3 | RNVC: 2

12 Jan 1999

5340-14-539-1334
Loop Clamp

145391334
NGM0099087215387: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-353-2262
Doorstop

143532262
573898755: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-505-0895
Mounting Plate

145050895
03631102: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-554-7175
Bumper

145547175
DA2C240727727: RNCC: 3 | RNVC: 2

7 Aug 2007

5340-14-522-6017
Loop Clamp

145226017
3656M002: RNCC: 3 | RNVC: 2

8 Nov 2000

5340-14-383-5347
Retaining Strap

143835347
20190481: RNCC: 3 | RNVC: 2
20190481: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-552-6289
Angle Bracket

145526289
RA1M701513261: RNCC: 3 | RNVC: 2

18 Jan 2007

5340-14-527-2570
Mounting Plate

145272570
74397: RNCC: 3 | RNVC: 2

17 Oct 2001

5340-14-528-5268
Mounting Bracket

145285268
SZ06.325.157D: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-459-5987
Bail Handle

144595987
946875: RNCC: 3 | RNVC: 2
946875: RNCC: 5 | RNVC: 9

10 Dec 1992

5340-14-468-7268
Bumper

144687268
PM1A580000001: RNCC: 3 | RNVC: 2
PM1A580000001: RNCC: 5 | RNVC: 2

16 Mar 1994

5340-14-381-4691
Retaining Strap

143814691
574025270: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-464-3426
Angle Bracket

144643426
ST406M52G59: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-367-6315
Mending Plate

143676315
003266080P: RNCC: 3 | RNVC: 2

19 Jan 1981

5340-14-451-2007
Plate Spacer

144512007
29408796: RNCC: 3 | RNVC: 2

6 Nov 1991

5340-14-493-0265
Mounting Plate

144930265
5000710698: RNCC: 3 | RNVC: 2
F300 0T 009 5166: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-533-9843
Mounting Bracket

145339843
M577-010103: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-536-3297
Mounting Bracket

145363297
D05/4105: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-14-512-5527
Section Block Clamp

145125527
F708-49-02: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-468-5188
Bumper

144685188
180-10548-800: RNCC: 3 | RNVC: 2
5000728178: RNCC: 5 | RNVC: 2

3 Mar 1994

5340-14-379-3980
Retaining Strap

143793980
AM01-026: RNCC: 3 | RNVC: 9

1 Oct 1982

5340-14-526-8382
Mounting Plate

145268382
5010559219: RNCC: 3 | RNVC: 2

7 Sep 2001

5340-14-344-2802
Angle Bracket

143442802
206742: RNCC: 3 | RNVC: 2

10 Aug 1977

5340-14-323-0801
Angle Bracket

143230801
M062569: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-444-7547
Mounting Plate

144447547
123813101: RNCC: 3 | RNVC: 9

21 Jan 1991

5340-14-349-9564
Mending Plate

143499564
22350008: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-441-5905
Mounting Bracket

144415905
D05402300: RNCC: 3 | RNVC: 2

4 Sep 1990

5340-14-435-9119
Runner

144359119
39139725: RNCC: 3 | RNVC: 2

29 Nov 1989

5340-14-457-6233
Pipe Hanger

144576233
PM1A753104012: RNCC: 3 | RNVC: 2
PM1A753104012: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-382-9143
Lock-Release Lever

143829143
148174: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-441-9265
Mounting Plate

144419265
5000261459: RNCC: 3 | RNVC: 2
1459: RNCC: 3 | RNVC: 2
5000261459: RNCC: 5 | RNVC: 9
F300 0T 009 9779: RNCC: 6 | RNVC: 9

26 Sep 1990

5340-14-552-8542
Loop Clamp

145528542
EN4113S19NH: RNCC: 2 | RNVC: 2

8 Feb 2007

5340-14-386-1821
Rod End Clevis

143861821
CPA133046: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-459-1566
Mounting Plate

144591566
16787458: RNCC: 3 | RNVC: 2

19 Nov 1992

5340-14-509-6666
Angle Bracket

145096666
RA1M216900510: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-500-5888
Mounting Bracket

145005888
7942: RNCC: 3 | RNVC: 2
F300 0T 024 6072: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-443-8757
Loop Clamp

144438757
51120605015: RNCC: 3 | RNVC: 2
240691500: RNCC: 5 | RNVC: 2
24FE15: RNCC: 5 | RNVC: 9

11 Dec 1990

5340-14-524-1754
Mounting Plate

145241754
2251006: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-546-7338
Mounting Bracket

145467338
S258A4012123: RNCC: 3 | RNVC: 2

9 Aug 2005

5340-14-508-6289
Mounting Bracket

145086289
009488210P: RNCC: 3 | RNVC: 2

23 Sep 1998

5340-14-377-3811
Mending Plate

143773811
269841: RNCC: 3 | RNVC: 2
269841: RNCC: 5 | RNVC: 9

17 May 1982

5340-14-555-2684
Angle Bracket

145552684
490989: RNCC: 3 | RNVC: 2

18 Oct 2007

5340-14-471-6573
Mounting Plate

144716573
5010045171: RNCC: 3 | RNVC: 2

7 Sep 1994

5340-14-392-8424
Corner Brace

143928424
0019052853: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-540-7215
Mounting Plate

145407215
38051572: RNCC: 3 | RNVC: 2
ND065344: RNCC: 5 | RNVC: 2
4848ZG8613181325: RNCC: 6 | RNVC: 9

22 Apr 2004

5340-14-545-1247
Swivel Caster

145451247
7411106: RNCC: 3 | RNVC: 2
8043546N00: RNCC: 5 | RNVC: 2

18 Mar 2005

5340-14-360-1625
Angle Bracket

143601625
A11A221174001: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-14-447-8430
Blank Panel

144478430
76062: RNCC: 3 | RNVC: 2
89280625: RNCC: 5 | RNVC: 2

6 Jun 1991

5340-14-500-8189
Section Block Clamp

145008189
E64009998049: RNCC: 3 | RNVC: 2
F300 0T 024 8391: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-420-9844
Loop Clamp

144209844
61213105030: RNCC: 3 | RNVC: 2
80G30: RNCC: 5 | RNVC: 2
5000603080: RNCC: 5 | RNVC: 2

6 Jan 1988

5340-14-549-9339
Mounting Plate

145499339
F1262504: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-551-5113
Mounting Bracket

145515113
RA1B702446141A1: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-425-0455
Retaining Strap

144250455
20230483: RNCC: 3 | RNVC: 2

16 Jun 1988

5340-14-482-5102
Bow Handle

144825102
PM1A725441920: RNCC: 3 | RNVC: 2
PM1A725441920: RNCC: 5 | RNVC: 2

11 Jul 1996

5340-14-508-1315
Butt Hinge

145081315
10068745: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-515-4210
Loop Clamp

145154210
41610025A: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-551-5211
Mounting Bracket

145515211
RA1M112115351N1: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-333-8982
Clamping Catch

143338982
GP.13-IP: RNCC: 3 | RNVC: 2
01283721: RNCC: 5 | RNVC: 2
G13: RNCC: 5 | RNVC: 2
G13IN0X18-8P0LI: RNCC: 5 | RNVC: 2
G13IN0X18-P0LI: RNCC: 5 | RNVC: 2
GP13IP: RNCC: 5 | RNVC: 2
2911-700-01017: RNCC: 5 | RNVC: 2
91479191: RNCC: 5 | RNVC: 2

23 Apr 1976

5340-14-389-1119
Utility Access Door

143891119
366A24-0125-0701: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-475-0775
Retaining Strap

144750775
DM2-3007200: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-14-251-6538
Loop Clamp

142516538
9121551000: RNCC: 3 | RNVC: 2
9-121551-000: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-042-7337
Mounting Bracket

140427337
429496: RNCC: 3 | RNVC: 2
J00679-02: RNCC: 3 | RNVC: 2
429496-001: RNCC: 5 | RNVC: 9

19 Dec 1979

5340-14-483-6872
Access Cover

144836872
P1-88-506016: RNCC: 3 | RNVC: 2
F300 0T 017 6043: RNCC: 6 | RNVC: 9

27 Sep 1996

5340-14-549-6217
Mounting Plate

145496217
JCB 10 135-733: RNCC: 3 | RNVC: 2

24 Apr 2006

5340-14-512-5740
Mounting Bracket

145125740
3BM01664AAAA: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-448-6361
Mounting Plate

144486361
44028991: RNCC: 3 | RNVC: 2
44028991: RNCC: 5 | RNVC: 9

4 Jul 1991

5340-14-497-4028
Bumper

144974028
13959: RNCC: 3 | RNVC: 2
F300 0T 023 1310: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-340-9805
Synchro Clamp

143409805
284788: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-496-2807
Mounting Bracket

144962807
17122001: RNCC: 3 | RNVC: 2
F300 0T 021 3417: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-512-8417
Access Cover

145128417
217172: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-522-1118
Mounting Plate

145221118
4189485: RNCC: 3 | RNVC: 2
4189485: RNCC: 5 | RNVC: 2

4 Oct 2000

5340-14-480-6293
Angle Bracket

144806293
2022121: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-460-6937
Mending Plate

144606937
6240800: RNCC: 3 | RNVC: 2
5045257: RNCC: 5 | RNVC: 9
SAF6240800: RNCC: 5 | RNVC: 9

4 Feb 1993

5340-14-407-1908
Retaining Strap

144071908
71763: RNCC: 3 | RNVC: 2

12 Feb 1986

5340-14-339-2253
Rim Lock Set

143392253
911BCLE455: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-539-3276
Mounting Bracket

145393276
20713205: RNCC: 3 | RNVC: 2

22 Dec 2003

5340-14-241-4430
Detent Plunger

142414430
70128662: RNCC: 3 | RNVC: 2
128662: RNCC: 5 | RNVC: 9
70128662: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-525-2641
Access Cover

145252641
06470P050002: RNCC: 3 | RNVC: 2
04039100: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-524-5250
Mounting Plate

145245250
0120780044: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-14-300-0328
Retaining Strap

143000328
152652: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-344-5809
Loop Clamp

143445809
200799: RNCC: 3 | RNVC: 2

9 Sep 1977

5340-14-454-1064
Retaining Strap

144541064
16759227: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-14-354-7553
Retaining Strap

143547553
150463: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-423-0477
Angle Bracket

144230477
721100637: RNCC: 3 | RNVC: 2
89174159: RNCC: 5 | RNVC: 2
721100637: RNCC: 5 | RNVC: 9

31 Mar 1988

5340-14-563-4085
Utility Resilient Mount

145634085
F00390429: RNCC: 3 | RNVC: 2

4 Feb 2010

5340-14-412-7982
Rod End Connector

144127982
T14F14LGAUCHE: RNCC: 3 | RNVC: 2

5 Nov 1986

5340-14-475-0724
Bumper

144750724
MB2829F00: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-14-540-4997
Mounting Bracket

145404997
61227509AA: RNCC: 3 | RNVC: 2

1 Apr 2004

5340-14-031-9969
Bow Handle

140319969
0857547400: RNCC: 3 | RNVC: 2
8575474: RNCC: 5 | RNVC: 2

5 Jul 1980

5340-14-549-0090
Angle Bracket

145490090
RA1M704192518: RNCC: 3 | RNVC: 2

1 Mar 2006

5340-14-461-8031
Bumper

144618031
45284471: RNCC: 3 | RNVC: 2
45284471: RNCC: 5 | RNVC: 9

26 Mar 1993

5340-14-463-7176
Retaining Strap

144637176
200848: RNCC: 3 | RNVC: 2
89170586: RNCC: 5 | RNVC: 2

23 Jun 1993

5340-14-534-6553
Shimmy Damper

145346553
40289: RNCC: 3 | RNVC: 2
91806882: RNCC: 5 | RNVC: 2

1 Apr 2003

5340-14-539-3935
Lock Bolt

145393935
1204211N001: RNCC: 3 | RNVC: 2

13 Jan 2004

5340-14-224-4378
Mending Plate

142244378
F3P23: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-279-7430
Lock-Release Lever

142797430
23544: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-408-4801
Snap Hook

144084801
08-936: RNCC: 3 | RNVC: 2
91678130: RNCC: 5 | RNVC: 2

2 Apr 1986

5340-14-395-6320
Retaining Strap

143956320
A11D602221003: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-503-6422
Mounting Plate

145036422
0315167250: RNCC: 3 | RNVC: 2

21 Jan 1998

5340-14-441-4335
Butt Hinge

144414335
PM1A125710042U1: RNCC: 3 | RNVC: 2
PM1A125710042U1: RNCC: 5 | RNVC: 2

22 Aug 1990

5340-14-528-4966
Mounting Bracket

145284966
1SH41732271: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-532-0598
Cover Strip

145320598
SZ03.250.544: RNCC: 3 | RNVC: 2
03-250-544: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-421-7776
Loop Clamp

144217776
102485: RNCC: 3 | RNVC: 2
102485: RNCC: 5 | RNVC: 9

27 Jan 1988

5340-14-357-8397
Retaining Strap

143578397
5000117850: RNCC: 3 | RNVC: 2
5000117850: RNCC: 5 | RNVC: 9

20 Jul 1979

5340-14-434-1635
Control Rod

144341635
186937-ACIER: RNCC: 3 | RNVC: 2

6 Sep 1989

5340-14-487-6403
Protection Bellows

144876403
VB504530: RNCC: 3 | RNVC: 2
VB504530: RNCC: 5 | RNVC: 9

16 Apr 1997

5340-14-545-8563
Mounting Bracket

145458563
732232: RNCC: 3 | RNVC: 2

21 May 2005

5340-14-377-7133
Mounting Plate

143777133
0PHD02-648871C: RNCC: 3 | RNVC: 2
0648871C00: RNCC: 5 | RNVC: 2

10 Jun 1982

5340-14-555-6644
Retaining Bail

145556644
MC3959F00: RNCC: 3 | RNVC: 2

5 Dec 2007

5340-14-322-3551
Angle Bracket

143223551
M425952: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-529-4235
Cushioning Pad

145294235
6501DCC124: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-549-0181
Mounting Bracket

145490181
10645903002: RNCC: 3 | RNVC: 2

1 Mar 2006

5340-14-497-5335
Angle Bracket

144975335
A25560: RNCC: 3 | RNVC: 2
F300 0T 023 3139: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-470-4449
Bow Handle

144704449
2560NR: RNCC: 3 | RNVC: 2
2560: RNCC: 3 | RNVC: 2
31116500000: RNCC: 5 | RNVC: 2

21 Jun 1994

5340-14-396-0417
Bow Handle

143960417
5000901269: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-523-2461
Pipe Hanger

145232461
RA1M701626170: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-507-6878
Blank Panel

145076878
10473989: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-14-444-2331
Cover Strip

144442331
PM1A212505004: RNCC: 3 | RNVC: 2
PM1A212505004: RNCC: 5 | RNVC: 2

18 Dec 1990

5340-14-506-9508
Mounting Plate

145069508
10472139: RNCC: 3 | RNVC: 2

27 May 1998

5340-14-461-3251
Protection Bellows

144613251
40-65X100A50X15B30X15: RNCC: 3 | RNVC: 2

8 Mar 1993

5340-14-451-8947
Mounting Bracket

144518947
24632-34: RNCC: 3 | RNVC: 2

11 Dec 1991

5340-14-500-0799
Mounting Bracket

145000799
3429056: RNCC: 3 | RNVC: 2
F300 0T 024 0811: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-532-0607
Cover Strip

145320607
03-250-565: RNCC: 3 | RNVC: 2
SZ03.250.565: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-474-4245
Mounting Bracket

144744245
45460615: RNCC: 3 | RNVC: 2

15 Feb 1995

5340-14-424-3331
Loop Clamp

144243331
MS21919DG9: RNCC: 3 | RNVC: 2
11C: RNCC: 5 | RNVC: 2
91303922: RNCC: 5 | RNVC: 2

19 May 1988

5340-14-513-8874
Rim Lock

145138874
21.41204: RNCC: 3 | RNVC: 2
235089: RNCC: 5 | RNVC: 2
2141204: RNCC: 5 | RNVC: 2

14 Apr 1999

5340-14-555-4437
Retaining Strap

145554437
215929: RNCC: 3 | RNVC: 2

19 Nov 2007

5340-14-398-8053
Bridge Clamp

143988053
5000497925: RNCC: 3 | RNVC: 2
5000497925: RNCC: 5 | RNVC: 9

20 Feb 1985

5340-14-383-9829
Loop Clamp

143839829
531079: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-554-9443
Loop Clamp

145549443
78651RH63: RNCC: 1 | RNVC: 2
78651RH63: RNCC: 3 | RNVC: 2

11 Sep 2007

5340-14-307-0397
Bail Handle

143070397
173365: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-437-9355
Angle Bracket

144379355
391365: RNCC: 3 | RNVC: 2

28 Feb 1990

5340-14-305-2832
Butt Hinge

143052832
31154: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-536-4702
Webbing Strap

145364702
AL4793: RNCC: 3 | RNVC: 2

27 Aug 2003

5340-14-548-6140
Angle Bracket

145486140
RA1B701226022: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-543-0435
Rod End Clevis

145430435
9502BDR123: RNCC: 3 | RNVC: 2

18 Aug 2004

5340-14-541-4688
Mounting Bracket

145414688
1SH41596200: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-238-7458
Retaining Strap

142387458
37338: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-351-9735
Slide Keeper

143519735
PP: RNCC: 3 | RNVC: 2

16 Oct 1978

5340-14-548-6067
Angle Bracket

145486067
RA1B702346115: RNCC: 3 | RNVC: 2

27 Jan 2006

Load More Results