What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 101 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 101 of 446

5340-14-441-4336
Butt Hinge

144414336
PM1A125710043U1: RNCC: 3 | RNVC: 2
PM1A125710043U1: RNCC: 5 | RNVC: 2

22 Aug 1990

5340-14-335-0488
Handwheel

143350488
MAT137-005F5AVIORB: RNCC: 3 | RNVC: 2
GSM137-007F9AVI0RB: RNCC: 5 | RNVC: 2
GSM137-07F9AVI0RB: RNCC: 5 | RNVC: 2

2 Jun 1976

5340-14-381-1874
Mending Plate

143811874
844678: RNCC: 3 | RNVC: 2
M07236-37: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-393-8677
Mounting Plate

143938677
NO PRIMARY REF14-393-8677: RNCC: 3 | RNVC: 2
979410: RNCC: 5 | RNVC: 9

21 Mar 1996

5340-14-428-5089
Angle Bracket

144285089
4605DME101-1002: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-397-9218
Mounting Plate

143979218
220072: RNCC: 3 | RNVC: 2
220072: RNCC: 5 | RNVC: 9

31 Jan 1985

5340-14-414-3131
Retaining Strap

144143131
FD3C761-20866: RNCC: 3 | RNVC: 2

28 Jan 1987

5340-14-225-9942
Snap Hook

142259942
4030-50T28: RNCC: 3 | RNVC: 2
4030-50AT: RNCC: 5 | RNVC: 2
4030-50AT28: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-480-6718
Access Cover

144806718
LBR538A610-460: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-413-9624
Retaining Strap

144139624
ST400S60P146: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-374-7019
Loop Clamp

143747019
61115305006: RNCC: 3 | RNVC: 2
85S06: RNCC: 5 | RNVC: 2
A0022-85S06: RNCC: 5 | RNVC: 2

30 Jan 1982

5340-14-432-9871
Loop Clamp

144329871
0013053527: RNCC: 3 | RNVC: 2

5 Jul 1989

5340-14-382-9120
Bumper

143829120
147989: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-432-3814
Mounting Bracket

144323814
540876: RNCC: 3 | RNVC: 2
00540876: RNCC: 5 | RNVC: 2

7 Jun 1989

5340-14-563-3611
Utility Resilient Mount

145633611
480-GS-885: RNCC: 3 | RNVC: 2
B007029: RNCC: 5 | RNVC: 2
186277863: RNCC: 5 | RNVC: 2
186277876: RNCC: 5 | RNVC: 2
2 0192-509: RNCC: 5 | RNVC: 2

1 Feb 2010

5340-14-527-3535
Loop Clamp

145273535
301515W1: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-379-8210
Loop Clamp

143798210
511131050271: RNCC: 3 | RNVC: 2
35G27: RNCC: 5 | RNVC: 2
A0021-35G27: RNCC: 5 | RNVC: 2

20 Oct 1982

5340-14-394-2287
Control Rod

143942287
AS525-03A: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-532-6553
Mounting Bracket

145326553
9012-159-000A: RNCC: 3 | RNVC: 2

27 Nov 2002

5340-14-352-4287
Retaining Band

143524287
321A59-0115-999: RNCC: 3 | RNVC: 2
85-689-6392: RNCC: 6 | RNVC: 9

16 Oct 1978

5340-14-495-6757
Access Cover

144956757
B79282-85: RNCC: 3 | RNVC: 2
F300 0T 019 6087: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-550-9102
Utility Access Door

145509102
730010S100-21A: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-375-9913
Anchor Strap

143759913
32172-369-000: RNCC: 3 | RNVC: 2
32172-369-000: RNCC: 5 | RNVC: 2

30 Mar 1982

5340-14-257-8218
Clamping Catch

142578218
GE03ZBPAC103ZB: RNCC: 3 | RNVC: 2
G03-103: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-461-4420
Rod End Clevis

144614420
262-12-23086-02: RNCC: 3 | RNVC: 2
85-694-5686: RNCC: 6 | RNVC: 9

10 Mar 1993

5340-14-459-2726
Support Hook

144592726
E3371: RNCC: 3 | RNVC: 2
409224: RNCC: 5 | RNVC: 2
85-694-9490: RNCC: 6 | RNVC: 9

19 Nov 1992

5340-14-458-7353
Arched Cushion

144587353
F0143-009F18TAB2DE30: RNCC: 3 | RNVC: 2
MAT169-0012F21DE30: RNCC: 3 | RNVC: 2

29 Oct 1992

5340-14-473-1153
Detent Plunger

144731153
22392-01: RNCC: 3 | RNVC: 9
1082257X00: RNCC: 5 | RNVC: 2

7 Dec 1994

5340-14-568-7780
Utility Resilient Mount

145687780
E1N-4001-54: RNCC: 3 | RNVC: 2

5 Jul 2011

5340-14-527-1453
Hand Crank Arm

145271453
6E0-43118-01: RNCC: 3 | RNVC: 2
SYB4182: RNCC: 5 | RNVC: 2

5 Oct 2001

5340-14-559-1420
Utility Access Door

145591420
4749-0050: RNCC: 3 | RNVC: 2

10 Dec 2008

5340-14-465-6458
Loop Clamp

144656458
NSA5516-11NV: RNCC: 3 | RNVC: 2
NSA5516-11NV: RNCC: 5 | RNVC: 2

6 Oct 1993

5340-14-407-4541
Mending Plate

144074541
3511 191 65051: RNCC: 3 | RNVC: 2
3511 191 65051: RNCC: 5 | RNVC: 2
3511-191-65051: RNCC: 5 | RNVC: 2

12 Feb 1986

5340-14-477-4437
Retaining Strap

144774437
10027578: RNCC: 3 | RNVC: 2

30 Aug 1995

5340-14-553-2638
Bumper

145532638
1818967: RNCC: 3 | RNVC: 2

20 Mar 2007

5340-14-457-5624
Bumper

144575624
3511 265 55881: RNCC: 3 | RNVC: 2
5045537: RNCC: 5 | RNVC: 9
3511 265 55881: RNCC: 5 | RNVC: 9

10 Sep 1992

5340-14-446-5001
Mounting Plate

144465001
81452386: RNCC: 3 | RNVC: 2

20 Mar 1991

5340-14-266-2127
Angle Bracket

142662127
450653: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-548-1116
Angle Bracket

145481116
RA1A702606455: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-457-5522
Mounting Plate

144575522
37934A: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-551-2840
Pipe Hanger

145512840
RA1M702416231N1: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-457-5706
Mending Plate

144575706
JVBT105001: RNCC: 3 | RNVC: 2
5045597: RNCC: 5 | RNVC: 9

10 Sep 1992

5340-14-536-8713
Mounting Bracket

145368713
030546: RNCC: 3 | RNVC: 2
30546: RNCC: 5 | RNVC: 2

17 Sep 2003

5340-14-338-4932
Butt Hinge

143384932
3160S25-24-420-1: RNCC: 3 | RNVC: 2
85-688-6213: RNCC: 6 | RNVC: 9

6 Nov 1976

5340-14-381-9331
Loop Clamp

143819331
3-2603-01-50A: RNCC: 3 | RNVC: 2
3-2603-01-50A: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-321-8410
Access Cover

143218410
0999036630: RNCC: 3 | RNVC: 2
85-663-6360: RNCC: 6 | RNVC: 9

1 Jan 1975

5340-14-500-5404
Mounting Plate

145005404
NO PRIMARY REF14-500-5404: RNCC: 3 | RNVC: 2
6467-24: RNCC: 5 | RNVC: 9
F300 0T 024 5580: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-323-2609
Retaining Strap

143232609
501-486-095-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-542-0107
Mounting Plate

145420107
20044-741: RNCC: 3 | RNVC: 2
502114003012A: RNCC: 3 | RNVC: 9
2 0044-741: RNCC: 5 | RNVC: 2

2 Jul 2004

5340-14-497-7774
Pipe Hanger

144977774
307-848-404-0: RNCC: 3 | RNVC: 2

15 Oct 1997

5340-14-237-5001
Rod End Connector

142375001
321A23-0277-20: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-420-6465
Plug Button

144206465
413-052-0: RNCC: 3 | RNVC: 2

16 Dec 1987

5340-14-298-8279
Slide Keeper

142988279
11323-033: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-446-1521
Swivel Caster

144461521
45180519: RNCC: 3 | RNVC: 2
LP8JR300-23B: RNCC: 5 | RNVC: 1
45180519: RNCC: 5 | RNVC: 9

6 Mar 1991

5340-14-418-8352
Loop Clamp

144188352
78653-06: RNCC: 3 | RNVC: 2

16 Sep 1987

5340-14-467-2845
Mounting Bracket

144672845
S50-901: RNCC: 3 | RNVC: 2
S50-901: RNCC: 5 | RNVC: 9
F300 0T 017 0835: RNCC: 5 | RNVC: 9

3 Jan 1994

5340-14-313-9734
Bow Handle

143139734
HE529-5872: RNCC: 3 | RNVC: 2
7508787P1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-432-7012
Butt Hinge

144327012
160H732439-06: RNCC: 3 | RNVC: 2

21 Jun 1989

5340-14-541-9853
Metal Grille

145419853
20026-523: RNCC: 3 | RNVC: 2
502105003026A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-298-8293
Loop Clamp

142988293
NO PRIMARY REF14-298-8293: RNCC: 3 | RNVC: 2
80695: RNCC: 5 | RNVC: 9
00-737-2833: RNCC: 6 | RNVC: 9

1 Jan 1973

5340-14-458-6967
Mounting Plate

144586967
8494-17: RNCC: 3 | RNVC: 2
89416297: RNCC: 5 | RNVC: 2

29 Oct 1992

5340-14-530-9277
Mounting Bracket

145309277
PL/00/19/D/10/0: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-14-302-3053
Angle Bracket

143023053
23030549: RNCC: 3 | RNVC: 2
23030549-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-032-1043
Rod End Clevis

140321043
341A81-1323-00: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-526-3844
Mounting Bracket

145263844
330A07-2591-171: RNCC: 3 | RNVC: 2

25 Jul 2001

5340-14-274-1023
Retaining Strap

142741023
17-7-100157: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-550-4873
Pipe Hanger

145504873
78731-030-100: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-411-1746
Rod End Clevis

144111746
332A39-0265-20: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-410-5299
Runner

144105299
16954321: RNCC: 3 | RNVC: 9

2 Jul 1986

5340-14-394-9947
Loop Clamp

143949947
NX4: RNCC: 3 | RNVC: 2
26568: RNCC: 5 | RNVC: 2
91340998: RNCC: 5 | RNVC: 2
26568: RNCC: 5 | RNVC: 2

2 Oct 1984

5340-14-482-9379
Pipe Hanger

144829379
78733-025-035A: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-538-0190
Mounting Bracket

145380190
NS-0279: RNCC: 3 | RNVC: 2

9 Dec 2003

5340-14-010-0172
Cover Strip

140100172
3130S25-10-021-1: RNCC: 3 | RNVC: 2

1 Jan 1961

5340-14-502-6710
Mounting Bracket

145026710
356-57045-08: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-541-5793
Eye Hook

145415793
169E594-00: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-302-8899
Handwheel

143028899
773-401-002FF6DET6: RNCC: 3 | RNVC: 2
773-401-002FF6DET6: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-370-1566
Butt Hinge

143701566
MY20297-007-1: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-289-3769
Retaining Strap

142893769
4H002725-00: RNCC: 3 | RNVC: 2
4H002725-00: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-415-5371
Access Cover

144155371
000002: RNCC: 3 | RNVC: 2
2: RNCC: 5 | RNVC: 9

18 May 1987

5340-14-473-8586
Mounting Bracket

144738586
332A76-3194-00: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-406-4622
Cover Strip

144064622
FD3C210-271: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-338-4499
Mounting Plate

143384499
330A22-2333-00: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-473-6484
Angle Bracket

144736484
332A22-1941-20: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-403-9787
Anchor Strap

144039787
NO PRIMARY REF14-403-9787: RNCC: 3 | RNVC: 2
F75BB0101-031: RNCC: 5 | RNVC: 9

11 Sep 1985

5340-14-520-4364
Mounting Bracket

145204364
M45AA0101-427: RNCC: 3 | RNVC: 2
M45AA0101-427: RNCC: 5 | RNVC: 9

17 May 2000

5340-14-450-5827
Retaining Strap

144505827
A10111-12: RNCC: 3 | RNVC: 2
44031015: RNCC: 3 | RNVC: 2
44031015: RNCC: 5 | RNVC: 9

9 Oct 1991

5340-14-470-0631
Bridge Clamp

144700631
LN214001WR187TYPE"H": RNCC: 3 | RNVC: 2
RAB3294: RNCC: 5 | RNVC: 2

27 May 1994

5340-14-482-5344
Rod End Clevis

144825344
160-24902-01: RNCC: 3 | RNVC: 2

11 Jul 1996

5340-14-350-3691
Friction Catch

143503691
7915: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-549-7156
Utility Access Door

145497156
0713719877000100-C: RNCC: 3 | RNVC: 2

2 May 2006

5340-14-406-1565
Access Cover

144061565
21501413-6: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-444-2729
Pipe Hanger

144442729
63278-8: RNCC: 3 | RNVC: 9

21 Dec 1990

5340-14-546-0040
Mounting Plate

145460040
FA7B1 088 05 P RQ1TF0010200A: RNCC: 3 | RNVC: 2

3 Jun 2005

5340-14-372-1721
Clamp Bolt Assembly

143721721
V3SD18111-2: RNCC: 3 | RNVC: 2
V3SD18111-2: RNCC: 5 | RNVC: 2

1 Sep 1981

5340-14-335-9949
Retaining Strap

143359949
481-226-080-0: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-365-4717
Rod End Clevis

143654717
NO PRIMARY REF14-365-4717: RNCC: 3 | RNVC: 2
29304-425-1: RNCC: 5 | RNVC: 9

19 Sep 1980

5340-14-511-9008
Access Cover

145119008
21229698-00: RNCC: 3 | RNVC: 2
21229698-9: RNCC: 5 | RNVC: 2

28 Jan 1999

5340-14-286-1240
Rod End Clevis

142861240
1-216-121: RNCC: 3 | RNVC: 2
1216121: RNCC: 5 | RNVC: 2
4079477: RNCC: 5 | RNVC: 2
1-216-121: RNCC: 5 | RNVC: 9
1216121: RNCC: 5 | RNVC: 9
4079477: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-511-5675
Loop Clamp

145115675
ASNA0021-21FE05: RNCC: 1 | RNVC: 2
210690500: RNCC: 3 | RNVC: 2
ASNA0021-21FE05: RNCC: 3 | RNVC: 2
ASNA0021-21FE05: RNCC: 5 | RNVC: 2

6 Jan 1999

5340-14-398-1369
Bumper

143981369
350A58-1028-20: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-207-7685
Retaining Strap

142077685
3114228: RNCC: 3 | RNVC: 2
VM1213-341: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-388-9865
Mounting Plate

143889865
045007-00733: RNCC: 3 | RNVC: 2
104137-00700: RNCC: 5 | RNVC: 2

29 Nov 1983

5340-14-396-1578
Access Cover

143961578
NO PRIMARY REF14-396-1578: RNCC: 3 | RNVC: 2
P4H015583-00: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-465-4901
Mounting Bracket

144654901
365A27-3394-20: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-421-3368
Bow Handle

144213368
536737: RNCC: 3 | RNVC: 2

14 Jan 1988

5340-14-386-5210
Angle Bracket

143865210
051103: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-386-5150
Mending Plate

143865150
032020: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-374-7206
Bumper

143747206
365A21-3419-21: RNCC: 3 | RNVC: 2

30 Jan 1982

5340-14-358-3535
Angle Bracket

143583535
JVAT71-02-03: RNCC: 3 | RNVC: 2

13 Aug 1979

5340-14-332-8680
Access Cover

143328680
T20-13B4501: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-474-1035
Rod End Connector

144741035
F7987 5108-89: RNCC: 3 | RNVC: 9

25 Jan 1995

5340-14-541-5135
Mounting Bracket

145415135
1091383-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-433-5107
Mounting Bracket

144335107
G230555-01: RNCC: 3 | RNVC: 2

2 Aug 1989

5340-14-496-8127
Butt Hinge

144968127
200140401113: RNCC: 3 | RNVC: 2
2001-40X40: RNCC: 5 | RNVC: 9
F300 0T 022 1456: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-410-3103
Butt Hinge

144103103
332A25-1049-22: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-14-314-3584
Snap Hook

143143584
NO PRIMARY REF14-314-3584: RNCC: 3 | RNVC: 2
AB70: RNCC: 5 | RNVC: 2
3060-00-00: RNCC: 5 | RNVC: 9
3060-00-00INDC: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-265-1346
Loop Clamp

142651346
5521721201: RNCC: 3 | RNVC: 2
55217-212-000DB: RNCC: 5 | RNVC: 2
55217-212DB: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-259-8959
Bow Handle

142598959
321A58-0148-20: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-398-6468
Doorknob

143986468
701-06-AP-L80: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-464-9620
Mounting Plate

144649620
365A52-1365-01: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-315-7821
Handle Grip

143157821
773-411-500FF7DET5: RNCC: 3 | RNVC: 2
773-411-500FF7DET5: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-522-8811
Synchro Clamp

145228811
457-13761-000: RNCC: 3 | RNVC: 2
457-13761-000: RNCC: 5 | RNVC: 9

6 Dec 2000

5340-14-479-8420
Mounting Bracket

144798420
2402-65-01-06: RNCC: 3 | RNVC: 2

7 Feb 1996

5340-14-546-4206
Mounting Plate

145464206
21428801-00: RNCC: 3 | RNVC: 2

4 Jul 2005

5340-14-494-7254
Mounting Plate

144947254
NO PRIMARY REF14-494-7254: RNCC: 3 | RNVC: 2
1801185: RNCC: 5 | RNVC: 9
F300 0T 017 8426: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-215-6440
Mending Plate

142156440
NO PRIMARY REF14-215-6440: RNCC: 3 | RNVC: 2
TID3884: RNCC: 5 | RNVC: 2
85439: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-539-9823
Pipe Hanger

145399823
78733-020-036: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-471-8406
Mounting Plate

144718406
160R332010-03: RNCC: 3 | RNVC: 2

21 Sep 1994

5340-14-464-3842
Filler Opening Cap

144643842
908D40-4: RNCC: 3 | RNVC: 2
908D40-4: RNCC: 5 | RNVC: 2
908D40-4: RNCC: 5 | RNVC: 9

28 Jul 1993

5340-14-446-8465
Compression Cup

144468465
S4086-3: RNCC: 3 | RNVC: 2

17 Apr 1991

5340-14-537-5641
Safety Cable Kit

145375641
6.90.1.22 REP2 TYPA B: RNCC: 3 | RNVC: 2

5 Nov 2003

5340-14-421-7043
Rod End Connector

144217043
8811980552: RNCC: 3 | RNVC: 2

27 Jan 1988

5340-14-453-9853
Mounting Plate

144539853
344848-0: RNCC: 3 | RNVC: 2
RAB0927: RNCC: 5 | RNVC: 2

19 Mar 1992

5340-14-345-3730
Quick Release Pin

143453730
15174543: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-520-6216
Mending Plate

145206216
C46347-2: RNCC: 3 | RNVC: 2

24 May 2000

5340-14-307-4343
Angle Bracket

143074343
1-7002: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-550-6179
Mounting Bracket

145506179
RA1B701306480A1: RNCC: 3 | RNVC: 2

3 Jul 2006

5340-14-388-2054
Rod End Connector

143882054
T8002MK4F11B: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-14-345-2850
Loop Clamp

143452850
0CV1000012: RNCC: 3 | RNVC: 2
0CV1000012: RNCC: 5 | RNVC: 2

5 Oct 1977

5340-14-272-9660
Loop Clamp

142729660
A68408: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-551-5207
Mounting Bracket

145515207
RA1B702502181: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-295-8274
Rod End Connector

142958274
C55602: RNCC: 3 | RNVC: 2
C55602: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-448-0519
Retaining Clip

144480519
2833-7: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-14-554-6799
Strapping

145546799
OFHC CDA 101 EP 0.2 MM X 110 MM: RNCC: 3 | RNVC: 2
9590006331: RNCC: 5 | RNVC: 2

2 Aug 2007

5340-14-382-5640
Angle Bracket

143825640
16904095: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-520-3376
Lock Key

145203376
7552.01.0: RNCC: 3 | RNVC: 2
91727648: RNCC: 5 | RNVC: 2

17 May 2000

5340-14-488-2411
Mounting Bracket

144882411
25621384: RNCC: 3 | RNVC: 2
2-562138-4: RNCC: 5 | RNVC: 2

23 Apr 1997

5340-14-228-2028
Loop Clamp

142282028
510235: RNCC: 3 | RNVC: 2
1714-4: RNCC: 5 | RNVC: 2
1714-4: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-366-4585
Rod End Connector

143664585
131501L: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-315-3793
Clamp Bolt Assembly

143153793
106307: RNCC: 3 | RNVC: 2
106307: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-495-4133
Mounting Bracket

144954133
J91343-3: RNCC: 3 | RNVC: 2
F300 0T 019 2248: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-524-2794
Eye Hook

145242794
902792: RNCC: 3 | RNVC: 2

9 Mar 2001

5340-14-323-6509
Anchor Strap

143236509
121A71-580-60-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-475-4684
Bumper

144754684
17-1657: RNCC: 3 | RNVC: 9
5340000355: RNCC: 5 | RNVC: 2

10 Apr 1995

5340-14-341-2168
Retaining Strap

143412168
425-30576-000: RNCC: 3 | RNVC: 2
425-30576-000: RNCC: 5 | RNVC: 2

16 Mar 1977

5340-14-407-5241
Bumper

144075241
20724953-2: RNCC: 3 | RNVC: 2

27 Feb 1986

5340-14-397-7683
Stake Pocket

143977683
3085G: RNCC: 3 | RNVC: 2

16 Jan 1985

5340-14-484-8794
Door Closer Dog

144848794
8376100: RNCC: 3 | RNVC: 2

12 Dec 1996

5340-14-387-0965
Control Rod

143870965
0010068337A160: RNCC: 3 | RNVC: 2
1-160-68B: RNCC: 3 | RNVC: 9
1-155-68: RNCC: 3 | RNVC: 9
1-160-68A: RNCC: 3 | RNVC: 9

24 Aug 1983

5340-14-432-2512
Access Cover

144322512
A0H505-8-79568: RNCC: 3 | RNVC: 2
A0H25898R8: RNCC: 3 | RNVC: 2

31 May 1989

5340-14-286-5110
Retaining Strap

142865110
341A57-1140-20: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-466-9896
Mounting Bracket

144669896
SUM75-15-1: RNCC: 3 | RNVC: 2

14 Dec 1993

5340-14-254-7771
Retaining Strap

142547771
52319: RNCC: 3 | RNVC: 9

1 Jan 1969

5340-14-455-4250
Mounting Bracket

144554250
16508672: RNCC: 3 | RNVC: 2

21 May 1992

5340-14-300-4348
Butt Hinge

143004348
1001-70X50ACIER: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-504-2356
Mounting Bracket

145042356
3478385M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-462-2864
Mounting Plate

144622864
SMCFAGEC0200D: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-14-324-7982
Retaining Strap

143247982
466-8A2P81: RNCC: 3 | RNVC: 2
466-8A2P81: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-463-0842
Mounting Plate

144630842
CEPK000004F19TYPEA1: RNCC: 3 | RNVC: 2

19 May 1993

5340-14-383-3806
Webbing Strap

143833806
120643: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-511-7926
Synchro Clamp

145117926
A12707: RNCC: 3 | RNVC: 2

20 Jan 1999

5340-14-553-9018
Loop Clamp

145539018
354 231: RNCC: 3 | RNVC: 2
354 231: RNCC: 3 | RNVC: 2

29 May 2007

5340-14-462-2558
Angle Bracket

144622558
45431281: RNCC: 3 | RNVC: 2
45431281: RNCC: 3 | RNVC: 9

15 Apr 1993

5340-14-526-9450
Cover Strip

145269450
01-250-691: RNCC: 3 | RNVC: 2
SZ01.250.691: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-296-3518
Sliding Door Track

142963518
CAP10-10-22-01: RNCC: 3 | RNVC: 9

1 Jan 1973

5340-14-363-7765
Angle Bracket

143637765
341A76-1046-05: RNCC: 3 | RNVC: 2

6 Jul 1980

5340-14-553-9474
Loop Clamp

145539474
NSA5516-02ND: RNCC: 3 | RNVC: 2
NSA5516-02ND: RNCC: 5 | RNVC: 2

4 Jun 2007

5340-14-482-2414
Access Cover

144822414
NO PRIMARY REF14-482-2414: RNCC: 3 | RNVC: 2
Y53835: RNCC: 5 | RNVC: 9

27 Jun 1996

5340-14-482-1859
Stand Base

144821859
4452-0051: RNCC: 3 | RNVC: 2
IF207-051: RNCC: 5 | RNVC: 9

25 Jun 1996

5340-14-476-8529
Mounting Bracket

144768529
3802641: RNCC: 3 | RNVC: 2
3802641: RNCC: 5 | RNVC: 2
18513939-5: RNCC: 5 | RNVC: 2

5 Jul 1995

5340-14-479-5772
Access Cover

144795772
23232405-5: RNCC: 3 | RNVC: 2

24 Jan 1996

5340-14-442-5951
Mortise Lock Set

144425951
H113181: RNCC: 3 | RNVC: 2

22 Oct 1990

5340-14-508-8089
Handwheel

145088089
3.50976.0: RNCC: 3 | RNVC: 2
3-50976-0: RNCC: 5 | RNVC: 9

30 Sep 1998

5340-14-534-8698
Plug Button

145348698
23LLSWI25411595PL1/2: RNCC: 3 | RNVC: 2
SYQ2595: RNCC: 5 | RNVC: 2

9 Apr 2003

5340-14-410-1635
Quick Release Pin

144101635
545714: RNCC: 3 | RNVC: 2

4 Jun 1986

5340-14-462-5726
Mounting Plate

144625726
GA70546-6: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-14-497-1506
Handwheel

144971506
212269-0: RNCC: 3 | RNVC: 2
F300 0T 022 7128: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-484-5078
Filler Opening Cap

144845078
3224662-1: RNCC: 3 | RNVC: 2

21 Nov 1996

5340-14-285-2924
Retaining Strap

142852924
2-11802: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-479-6053
Retaining Strap

144796053
23626959-9: RNCC: 3 | RNVC: 2

24 Jan 1996

5340-14-350-8680
Threaded Rod End

143508680
2-140911-0: RNCC: 3 | RNVC: 2
2-140911-0: RNCC: 5 | RNVC: 9

12 Jul 1978

5340-14-537-5781
Loop Clamp

145375781
COLLIER A VIS 10X16: RNCC: 3 | RNVC: 9

6 Nov 2003

5340-14-510-0103
Strapping

145100103
X407130-3: RNCC: 3 | RNVC: 2
5340AA1135734: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-477-9369
Mounting Plate

144779369
54402-710-1: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-14-522-6280
Butt Hinge

145226280
G6-5-1: RNCC: 3 | RNVC: 2

8 Nov 2000

5340-14-520-3976
Retaining Band

145203976
CS2-0.000.261: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-302-1448
Mending Plate

143021448
A10-22-040-04-0: RNCC: 3 | RNVC: 2
A10-22-040-04-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-377-1288
Quick Release Pin

143771288
524-51-033: RNCC: 3 | RNVC: 2
52-10-1030: RNCC: 5 | RNVC: 2
52451033: RNCC: 5 | RNVC: 2
524-51-033: RNCC: 5 | RNVC: 9

17 May 1982

5340-14-272-9670
Retaining Strap

142729670
A1-64107: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-224-0846
Rod End Clevis

142240846
501-990-395-0: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-392-9080
Access Cover

143929080
M613-000103: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-457-8231
Bumper

144578231
6P54: RNCC: 3 | RNVC: 2
1844-15: RNCC: 5 | RNVC: 2
9601573280: RNCC: 5 | RNVC: 2

24 Sep 1992

5340-14-286-5158
Angle Bracket

142865158
341A27-1228-20: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-335-0501
Handwheel

143350501
MAT137-003F4CUPROALU: RNCC: 3 | RNVC: 2
GSM137-007F16CUPR0ALU: RNCC: 5 | RNVC: 2
GSM137-07F16CUPR0ALU: RNCC: 5 | RNVC: 2

2 Jun 1976

5340-14-569-4239
Utility Guard Rail Section

145694239
PC3253: RNCC: 3 | RNVC: 2
1KP507: RNCC: 5 | RNVC: 2
1KP507: RNCC: 5 | RNVC: 2

14 Sep 2011

5340-14-517-9511
Angle Bracket

145179511
10488987: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-14-401-5283
Loop Clamp

144015283
51200010012: RNCC: 3 | RNVC: 2
300N12: RNCC: 5 | RNVC: 2
14400189E: RNCC: 5 | RNVC: 2
14400189E: RNCC: 5 | RNVC: 2

13 Jun 1985

5340-14-355-8613
Access Cover

143558613
NO PRIMARY REF14-355-8613: RNCC: 3 | RNVC: 2
MD4524: RNCC: 5 | RNVC: 9

5 Apr 1979

5340-14-426-2498
Rim Lock Set

144262498
1658064: RNCC: 3 | RNVC: 9
U401800840: RNCC: 5 | RNVC: 2

10 Aug 1988

5340-14-516-6852
Mounting Plate

145166852
46944626: RNCC: 3 | RNVC: 2

12 Oct 1999

5340-14-549-0939
Angle Bracket

145490939
RA1M704317513: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-257-7524
Retaining Strap

142577524
9135912: RNCC: 3 | RNVC: 2
9135912: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-401-8291
Bumper

144018291
MC0334C1: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-509-6817
Cover Strip

145096817
RA1M705852911N1: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-441-7320
Mounting Bracket

144417320
234501331210: RNCC: 3 | RNVC: 2
23451270: RNCC: 5 | RNVC: 2

17 Sep 1990

5340-14-312-8311
Angle Bracket

143128311
0249857400: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-520-8888
Angle Bracket

145208888
EQUER01604A00: RNCC: 3 | RNVC: 2
EQUER01604X00: RNCC: 5 | RNVC: 9

21 Jun 2000

5340-14-301-1005
Retaining Strap

143011005
330A55-1043-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-553-5757
Retaining Strap

145535757
BBCE-12H6000: RNCC: 3 | RNVC: 2

18 Apr 2007

5340-14-397-5005
Mounting Plate

143975005
069A44-717788G: RNCC: 3 | RNVC: 2
0717788G00: RNCC: 5 | RNVC: 2

14 Dec 1984

5340-14-487-1119
Clip Retainer Plate

144871119
S357-4503-000: RNCC: 3 | RNVC: 2
S357-4503-000: RNCC: 5 | RNVC: 2
91645709: RNCC: 5 | RNVC: 2

10 Apr 1997

5340-14-409-8006
Anchor Strap

144098006
M397-02-10-46-12: RNCC: 3 | RNVC: 2
453-80308-000: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-457-5755
Plug Button

144575755
5000655673: RNCC: 3 | RNVC: 2
89287550: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-522-9582
Access Cover

145229582
ST159-2M561P14: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-14-297-4577
Rim Lock Set

142974577
812TC27-4315LAIT0NCAD: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-519-7750
Handwheel

145197750
710148-400: RNCC: 3 | RNVC: 2
710148-400: RNCC: 5 | RNVC: 2
710148-400: RNCC: 5 | RNVC: 9

5 Apr 2000

5340-14-361-2473
Runner

143612473
G10423-20: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-349-8253
Access Cover

143498253
M208-21015: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-370-7401
Retaining Strap

143707401
676-43613-00: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-489-9692
Mounting Plate

144899692
261512C: RNCC: 3 | RNVC: 2

3 Sep 1997

5340-14-373-3867
Access Cover

143733867
NO PRIMARY REF14-373-3867: RNCC: 3 | RNVC: 2
71613: RNCC: 5 | RNVC: 9

21 Oct 1981

5340-14-507-4457
Rod End Clevis

145074457
R4A195-10-820DP: RNCC: 3 | RNVC: 2

8 Jul 1998

5340-14-440-7387
Mounting Bracket

144407387
67170: RNCC: 3 | RNVC: 2
SK-208A: RNCC: 6 | RNVC: 9

23 Jul 1990

5340-14-547-3603
Mounting Bracket

145473603
201193G1L: RNCC: 3 | RNVC: 2
AA017944: RNCC: 6 | RNVC: 9

10 Oct 2005

5340-14-508-1595
Retaining Strap

145081595
3627P023: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-453-4296
Bridge Clamp

144534296
16211975: RNCC: 3 | RNVC: 2

19 Feb 1992

5340-14-385-8946
Anchor Strap

143858946
BAZ97719: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-548-0880
Snap Hook

145480880
NO PRIMARY REF 14-548-0880: RNCC: 3 | RNVC: 2
1002836: RNCC: 5 | RNVC: 2
661900: RNCC: 5 | RNVC: 9
SUPER RAPIDEX: RNCC: 5 | RNVC: 9
AN098330: RNCC: 6 | RNVC: 9

9 Dec 2005

5340-14-428-5537
Angle Bracket

144285537
MKG3712215: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-548-9977
Blank Panel

145489977
46235529: RNCC: 3 | RNVC: 2

28 Feb 2006

5340-14-325-6423
Pipe Hanger

143256423
121S71-600-22-0: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-336-4812
Retaining Strap

143364812
2355-30-02: RNCC: 3 | RNVC: 2

14 Aug 1976

5340-14-304-7620
Bumper

143047620
E4M241-62-823: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-404-1300
Bumper

144041300
0527-03-04-7: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-389-5522
Detent Plunger

143895522
365A87-3262-21: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-508-6619
Mounting Plate

145086619
JGA05-42: RNCC: 3 | RNVC: 2

23 Sep 1998

5340-14-516-0720
Door Handle

145160720
10561107: RNCC: 3 | RNVC: 2
IF-192-6017: RNCC: 5 | RNVC: 9

8 Sep 1999

5340-14-329-6265
Loop Clamp

143296265
F706-236: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-482-9285
Pipe Hanger

144829285
78732-040-031B: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-475-0799
Mounting Plate

144750799
DM4-5023300: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-14-503-5899
Angle Bracket

145035899
47029671: RNCC: 3 | RNVC: 2

21 Jan 1998

5340-14-410-6911
Retaining Strap

144106911
251640: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-516-2576
Loop Clamp

145162576
RSGU1-30/15-W1: RNCC: 3 | RNVC: 2

15 Sep 1999

5340-14-327-8379
Support Hook

143278379
0207030210: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-242-4193
Angle Bracket

142424193
963S: RNCC: 3 | RNVC: 9
1329P: RNCC: 5 | RNVC: 9
963: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-278-3395
Pipe Hanger

142783395
160-61021: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-486-3743
Loop Holder

144863743
050A57-546804D: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-549-8450
Mounting Bracket

145498450
F1264616: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-530-1226
Mounting Bracket

145301226
TB3050205: RNCC: 3 | RNVC: 2

14 May 2002

5340-14-486-3386
Block Clamp

144863386
P02745: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-535-4074
Mounting Bracket

145354074
5010477176: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-540-7005
Mounting Bracket

145407005
38051014: RNCC: 3 | RNVC: 2
00064A: RNCC: 5 | RNVC: 2
4848ZG8613181016: RNCC: 6 | RNVC: 9

20 Apr 2004

5340-14-553-6825
Mounting Bracket

145536825
82039286000: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-363-9238
Threaded Rod End

143639238
574041097: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-439-3075
Loop Clamp

144393075
51411905039: RNCC: 3 | RNVC: 2
28P39: RNCC: 5 | RNVC: 2

25 Apr 1990

5340-14-547-6350
Mounting Bracket

145476350
AX1027F00: RNCC: 3 | RNVC: 2

20 Oct 2005

5340-14-549-1024
Section Block Clamp

145491024
RA1M703754141N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-544-3393
Mounting Bracket

145443393
82062564000: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-14-411-5137
Threaded Rod End

144115137
200218-00300: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-312-9815
Webbing Strap

143129815
PH36-805I: RNCC: 3 | RNVC: 2
PH36-805I: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-411-1528
Mounting Plate

144111528
332A34-1089-22: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-389-4536
Angle Bracket

143894536
365A53-2022-20: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-469-8593
Protection Bellows

144698593
MPS40: RNCC: 3 | RNVC: 2
EA2-0262: RNCC: 5 | RNVC: 2

16 May 1994

5340-14-469-6471
Section Block Clamp

144696471
PM1A745149011: RNCC: 3 | RNVC: 2
PM1A745149011: RNCC: 5 | RNVC: 2
85-695-2444: RNCC: 6 | RNVC: 9

4 May 1994

5340-14-465-1679
Angle Bracket

144651679
365A61-8319-20: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-254-2758
Retaining Strap

142542758
A00260-36: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-310-2376
Bridge Clamp

143102376
773-414-166FF9: RNCC: 3 | RNVC: 2
773-414-166FF9: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-505-2007
Access Cover

145052007
5800820-13932-001: RNCC: 3 | RNVC: 2

13 Mar 1998

5340-14-220-3430
Bail Handle

142203430
NO PRIMARY REF14-220-3430: RNCC: 3 | RNVC: 2
2700022: RNCC: 5 | RNVC: 9
SP-100A: RNCC: 6 | RNVC: 9

1 Jan 1965

5340-14-537-5544
Mounting Bracket

145375544
332P61-6512-07: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-526-9443
Cover Strip

145269443
00-250-246: RNCC: 3 | RNVC: 2
SZ00.250.246: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-432-8456
Mounting Bracket

144328456
NO PRIMARY REF14-432-8456: RNCC: 3 | RNVC: 2
540003: RNCC: 5 | RNVC: 9
540003: RNCC: 5 | RNVC: 9

28 Jun 1989

5340-14-389-5114
Pipe Hanger

143895114
365A75-2216-20: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-366-4452
Retaining Clip

143664452
7903078002: RNCC: 3 | RNVC: 2
6967-54: RNCC: 5 | RNVC: 2

20 Nov 1980

5340-14-467-2686
Butt Hinge

144672686
CC.404A-IB: RNCC: 3 | RNVC: 2
CC404AIB: RNCC: 5 | RNVC: 2
91421206: RNCC: 5 | RNVC: 9

21 Dec 1993

5340-14-473-8597
Mounting Bracket

144738597
332A87-0232-00: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-439-8219
Mounting Plate

144398219
332A55-1220-20: RNCC: 3 | RNVC: 2

23 May 1990

5340-14-525-3282
Mounting Bracket

145253282
332P87-2149-26: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-401-3368
Mending Plate

144013368
NO PRIMARY REF14-401-3368: RNCC: 3 | RNVC: 2
20033996: RNCC: 5 | RNVC: 9

5 Jun 1985

5340-14-347-9244
Retaining Strap

143479244
AZU182-122: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-302-5476
Bumper

143025476
330A58-3825-20: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-444-9356
Threaded Rod End

144449356
720-910-206: RNCC: 3 | RNVC: 2

29 Jan 1991

5340-14-424-7392
Rod End Clevis

144247392
10-221-006-11: RNCC: 3 | RNVC: 2

8 Jun 1988

5340-14-370-8729
Pipe Hanger

143708729
303-994-901-0: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-501-8591
Turnbuckle Body

145018591
052-201-06-02: RNCC: 3 | RNVC: 2

17 Nov 1997

5340-14-257-2422
Cover Strip

142572422
330A25-2202-37: RNCC: 3 | RNVC: 2
330A25-2202-3700: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-346-2075
Loop Clamp

143462075
AY182-78: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-480-0447
Mounting Plate

144800447
6-451403-003: RNCC: 3 | RNVC: 9
TID27338: RNCC: 5 | RNVC: 2

21 Feb 1996

5340-14-363-9741
Mending Plate

143639741
54404-351-1: RNCC: 3 | RNVC: 9

7 Aug 1980

5340-14-473-1866
Plug Button

144731866
27108185-7: RNCC: 3 | RNVC: 2

7 Dec 1994

5340-14-224-0055
Rod End Connector

142240055
F3P173: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-386-9194
Screw Hook

143869194
5340CKG0NDVISB0ISAC6X80: RNCC: 2 | RNVC: 2

24 Aug 1983

5340-14-536-1940
Strap Fastener Loop

145361940
23KMSWN34340800-3/4-F9/REP4: RNCC: 3 | RNVC: 2
SYQ3117: RNCC: 5 | RNVC: 2

15 Jul 2003

5340-14-370-8830
Anchor Strap

143708830
S3654-1: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-480-0395
Access Cover

144800395
27119340-4: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-517-7393
Loop Clamp

145177393
501-779-788-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-435-5731
Bridge Clamp

144355731
TS104803-1: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-14-418-4123
Casement Fastener

144184123
5340CJVERROUDOUILLEPOIGNED16X300: RNCC: 2 | RNVC: 2

21 Aug 1987

5340-14-461-1615
Rod End Connector

144611615
5010003539: RNCC: 3 | RNVC: 2

24 Feb 1993

5340-14-355-1160
Mending Plate

143551160
525639: RNCC: 3 | RNVC: 2
00525639: RNCC: 5 | RNVC: 2

19 Mar 1979

5340-14-522-6750
Mounting Bracket

145226750
1498.40654: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-14-521-4162
Mounting Plate

145214162
337920: RNCC: 3 | RNVC: 2
337920: RNCC: 5 | RNVC: 9

26 Jul 2000

5340-14-458-0554
Mounting Plate

144580554
4508516B: RNCC: 3 | RNVC: 2

2 Oct 1992

5340-14-523-7231
Mounting Plate

145237231
U5824285: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-481-3708
Mounting Bracket

144813708
63452: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-209-1075
Loop Clamp

142091075
51113105036: RNCC: 3 | RNVC: 2
2425G36: RNCC: 5 | RNVC: 2
25G36: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-535-7144
Loop Clamp

145357144
206X3-4MM85CSST2I: RNCC: 3 | RNVC: 2

19 Jun 2003

5340-14-212-0435
Butt Hinge

142120435
28015192-5: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-232-9067
Mounting Bracket

142329067
0249857640: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-535-3997
Mounting Plate

145353997
5010412108: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-384-1077
Bridge Clamp

143841077
7865005303: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-443-6669
Mounting Plate

144436669
123272: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-14-312-7558
Flush Catch Claw

143127558
911-255: RNCC: 3 | RNVC: 2
M4ZS460D8187: RNCC: 5 | RNVC: 2
07 3145: RNCC: 5 | RNVC: 2
911255: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-466-5879
Mounting Plate

144665879
851-400-032-0: RNCC: 3 | RNVC: 2

17 Nov 1993

5340-14-319-8281
Quick Release Pin

143198281
121S83-553-00-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-205-9115
Rod End Connector

142059115
253-5M366P55A: RNCC: 3 | RNVC: 9
PA253-5M366P55A: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-201-9216
Retaining Strap

142019216
574-508-140-0: RNCC: 3 | RNVC: 2

1 Jan 1962

5340-14-292-8844
Angle Bracket

142928844
404-5-12: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-330-0168
Rod End Clevis

143300168
880-27-0-190-0: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-354-3998
Mending Plate

143543998
21313177: RNCC: 3 | RNVC: 2
21313177-3: RNCC: 5 | RNVC: 2

31 Jan 1979

5340-14-552-7237
Mounting Bracket

145527237
5010604371: RNCC: 3 | RNVC: 2

25 Jan 2007

5340-14-320-4465
Bumper

143204465
3327: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-382-3878
Runner

143823878
BAZ97566: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-346-2161
Angle Bracket

143462161
26255022: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-257-9263
Angle Bracket

142579263
9130075: RNCC: 3 | RNVC: 2
9130075: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-250-4569
Retaining Strap

142504569
ST406M53P133: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-386-8265
Rim Lock

143868265
3220D7171: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-532-7814
Magnetic Catch

145327814
02-10-801-10: RNCC: 3 | RNVC: 2
02-10-801-10: RNCC: 5 | RNVC: 2

11 Dec 2002

5340-14-440-9880
Mounting Bracket

144409880
8494-15: RNCC: 3 | RNVC: 2
89416318: RNCC: 5 | RNVC: 2

9 Aug 1990

5340-14-475-2505
Mounting Bracket

144752505
332A37-3227-01: RNCC: 3 | RNVC: 2

22 Mar 1995

5340-14-351-3708
Loop Clamp

143513708
650-791-046-0: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-391-8386
Loop Clamp

143918386
51113105064: RNCC: 3 | RNVC: 2
25G64: RNCC: 5 | RNVC: 2
ASNA0021-25G64: RNCC: 5 | RNVC: 2
A0021-25G64: RNCC: 5 | RNVC: 2
A0021-25G64: RNCC: 5 | RNVC: 9

21 Mar 1984

5340-14-264-1708
Loop Clamp

142641708
55217-240DB: RNCC: 3 | RNVC: 2
55217-240-000DB: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-275-8465
Turnbuckle Body

142758465
253-5M312P34A: RNCC: 3 | RNVC: 9
PA253-5M312P34A: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-231-0929
Loop Clamp

142310929
51100005014: RNCC: 3 | RNVC: 2
15N14: RNCC: 5 | RNVC: 2
VDP4507: RNCC: 5 | RNVC: 2
A0021-15N14: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-554-8872
Loop Clamp

145548872
78651DH6-5AG: RNCC: 1 | RNVC: 2
78651DH6-5AG: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-399-8307
Flush Catch Claw

143998307
970601: RNCC: 3 | RNVC: 2
970601: RNCC: 5 | RNVC: 9

14 Mar 1985

5340-14-418-4828
Leaf Spring

144184828
L80G244LD1240EP9: RNCC: 3 | RNVC: 2
L80G244-3: RNCC: 5 | RNVC: 2
R80G244LD1170EP9: RNCC: 5 | RNVC: 2
1105-159: RNCC: 5 | RNVC: 2

26 Aug 1987

5340-14-478-2319
Cable Retractor

144782319
3805062: RNCC: 3 | RNVC: 2
3805062: RNCC: 5 | RNVC: 2
18518049-1: RNCC: 5 | RNVC: 2

18 Oct 1995

5340-14-389-1120
Utility Access Door

143891120
366A24-0125-0601: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-286-3489
Loop Clamp

142863489
51123105023: RNCC: 3 | RNVC: 2
24GE23: RNCC: 5 | RNVC: 2
25GE23: RNCC: 5 | RNVC: 2
A0021-25GE23: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-504-5363
Mounting Plate

145045363
78190-3: RNCC: 3 | RNVC: 2

18 Feb 1998

5340-14-457-5704
Mending Plate

144575704
JVBT102008-03: RNCC: 3 | RNVC: 2
5045586: RNCC: 5 | RNVC: 9

10 Sep 1992

5340-14-304-2640
Flush Catch Claw

143042640
TH20B2640: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-330-1125
Synchro Clamp

143301125
GEDSM74-15M1-5P8: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-440-9367
Rod End Connector

144409367
061238379: RNCC: 3 | RNVC: 9
238379: RNCC: 5 | RNVC: 9

8 Aug 1990

5340-14-262-3983
Retaining Strap

142623983
175-74-49: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-466-1761
Flush Catch Claw

144661761
162484: RNCC: 3 | RNVC: 2
89169916: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-321-0094
Access Cover

143210094
15437718: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-554-1798
Access Cover

145541798
C71955: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-532-0542
Access Cover

145320542
0RX35500: RNCC: 3 | RNVC: 2
0RX35500: RNCC: 5 | RNVC: 9

9 Oct 2002

5340-14-303-3364
Access Cover

143033364
180192: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-379-7363
Access Cover

143797363
2206-331E516: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-450-2822
Rod End Clevis

144502822
PM1A249414A1: RNCC: 3 | RNVC: 2
PM1A249414A1: RNCC: 5 | RNVC: 2

25 Sep 1991

5340-14-534-7510
Access Cover

145347510
46061681: RNCC: 3 | RNVC: 2
46061681: RNCC: 5 | RNVC: 9

2 Apr 2003

5340-14-506-0216
Mounting Plate

145060216
RA1M114010339N1: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-14-224-8862
Bumper

142248862
GSM1674A4: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-493-8755
Bumper

144938755
3292357-5: RNCC: 3 | RNVC: 2
F300 0T 014 3482: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-435-6683
Mounting Plate

144356683
16795296: RNCC: 3 | RNVC: 9

15 Nov 1989

5340-14-518-4593
Mounting Plate

145184593
T537A2005176: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-350-4229
Retaining Strap

143504229
209805: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-480-2235
Door Handle

144802235
05.05.0024: RNCC: 3 | RNVC: 2

28 Feb 1996

5340-14-541-0707
Mounting Plate

145410707
10678175000: RNCC: 3 | RNVC: 2

13 May 2004

5340-14-031-1639
Retaining Strap

140311639
VDP4212: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-552-4753
Block Clamp

145524753
S881A9601220: RNCC: 3 | RNVC: 2

8 Jan 2007

5340-14-392-5563
Loop Clamp

143925563
0235230580: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-507-5693
Swivel Caster

145075693
211125L: RNCC: 3 | RNVC: 2
RGRE00240: RNCC: 5 | RNVC: 2

23 Jul 1998

5340-14-454-1054
Blank Panel

144541054
16662013: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-14-547-6247
Loop Clamp

145476247
PS1180.3: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-14-395-9454
Webbing Strap

143959454
5000724709: RNCC: 3 | RNVC: 2
M4ZS785D1123A: RNCC: 5 | RNVC: 2

27 Nov 1984

5340-14-494-7111
Mounting Bracket

144947111
0415 2750: RNCC: 3 | RNVC: 2
04152750: RNCC: 5 | RNVC: 9
F300 0T 025 2177: RNCC: 6 | RNVC: 9
F300 0T 017 8158: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-481-5971
Eye Hook

144815971
C1-30DROITLAITONPOLI: RNCC: 3 | RNVC: 2

16 May 1996

5340-14-413-9710
Runner

144139710
ST406M91P74: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-514-4781
Shelf Bracket

145144781
10493273: RNCC: 3 | RNVC: 2
IF-192-2994: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-473-2426
Mounting Bracket

144732426
321A58-0812-20: RNCC: 3 | RNVC: 2

7 Dec 1994

5340-14-346-9402
Loop Clamp

143469402
341A84-1083-20: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-14-502-3424
Pipe Hanger

145023424
307-804-001-0: RNCC: 3 | RNVC: 2

9 Dec 1997

5340-14-303-1788
Mending Plate

143031788
A10-33-701-00-2: RNCC: 3 | RNVC: 2
A10-33-701-00-2: RNCC: 5 | RNVC: 2
85-801-3375: RNCC: 6 | RNVC: 9

1 Jan 1973

5340-14-384-4455
Rod End Connector

143844455
E64-35-3315-006-1-1REP12: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-306-3671
Loop Clamp

143063671
53286-3-10: RNCC: 3 | RNVC: 2
53286-3-10: RNCC: 3 | RNVC: 2
0400466100: RNCC: 5 | RNVC: 2
9560110320: RNCC: 5 | RNVC: 2
620-854-022-0: RNCC: 5 | RNVC: 2
53286-3-10: RNCC: 5 | RNVC: 2
53286-3-10: RNCC: 5 | RNVC: 9
P53286-3-10: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-486-6107
Butt Hinge

144866107
A10-12-734-34-1: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-14-401-0409
Rod End Clevis

144010409
80-300725-2: RNCC: 3 | RNVC: 2

28 May 1985

5340-14-549-8357
Mounting Bracket

145498357
169E242-00: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-390-1480
Pipe Hanger

143901480
366A53-0100-DB: RNCC: 3 | RNVC: 2
366A53-0100DB: RNCC: 5 | RNVC: 2

26 Jan 1984

5340-14-542-8942
Access Cover

145428942
708120S000-30A: RNCC: 3 | RNVC: 2

14 Aug 2004

5340-14-496-9169
Mounting Plate

144969169
NO PRIMARY REF 14-496-9169: RNCC: 3 | RNVC: 2
490127-32029-05: RNCC: 5 | RNVC: 2
490127-32029-05: RNCC: 5 | RNVC: 9
F300 0T 022 2666: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-473-6094
Lock-Release Lever

144736094
452-M3509-000: RNCC: 3 | RNVC: 2
452M3509-000: RNCC: 5 | RNVC: 2

4 Jan 1995

5340-14-489-8432
Mounting Bracket

144898432
341A69-5072-03: RNCC: 3 | RNVC: 2
341A69507203: RNCC: 5 | RNVC: 2

26 Aug 1997

5340-14-442-0345
Mounting Bracket

144420345
332A94-8200-10: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-415-2836
Doorknob

144152836
NO PRIMARY REF14-415-2836: RNCC: 3 | RNVC: 2
18500-07: RNCC: 5 | RNVC: 9

28 Apr 1987

5340-14-532-6799
Mounting Bracket

145326799
341A84-5006-20: RNCC: 3 | RNVC: 2

27 Nov 2002

5340-14-464-8284
Mortise Lock Set

144648284
BEQUILLE1PCL-2-12N: RNCC: 3 | RNVC: 2

1 Sep 1993

5340-14-473-5220
Bumper

144735220
RA1M294324231: RNCC: 3 | RNVC: 2

31 Dec 1994

5340-14-541-7954
Retaining Band

145417954
E66504800001: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-500-5480
Angle Bracket

145005480
4769710190: RNCC: 3 | RNVC: 2
F300 0T 024 5663: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-542-1003
Loop Clamp

145421003
51319905015: RNCC: 3 | RNVC: 2

2 Jul 2004

5340-14-336-7119
Angle Bracket

143367119
189252: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-519-9829
Bow Handle

145199829
35951: RNCC: 3 | RNVC: 2

2 May 2000

5340-14-520-1808
Angle Bracket

145201808
40503172: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-520-2696
Angle Bracket

145202696
NV1077: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-323-6376
Pipe Hanger

143236376
8-0403S: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-551-2775
Angle Bracket

145512775
RA1B701716341: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-457-8666
Clamping Catch

144578666
16509173: RNCC: 3 | RNVC: 2

24 Sep 1992

5340-14-533-5642
Angle Bracket

145335642
010436010P: RNCC: 3 | RNVC: 2

11 Feb 2003

5340-14-314-3634
Retaining Band

143143634
5000001599: RNCC: 3 | RNVC: 2
5000001599: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-458-9115
Mounting Plate

144589115
100A103031: RNCC: 3 | RNVC: 2

5 Nov 1992

5340-14-516-7776
Bumper

145167776
F00155951: RNCC: 3 | RNVC: 2
F00155951: RNCC: 5 | RNVC: 9

14 Oct 1999

5340-14-553-0538
Angle Bracket

145530538
RA1M701246091: RNCC: 3 | RNVC: 2

27 Feb 2007

5340-14-441-0443
Mounting Bracket

144410443
8-0314A: RNCC: 3 | RNVC: 2

16 Aug 1990

5340-14-391-2381
Mounting Plate

143912381
2-32218: RNCC: 3 | RNVC: 2

1 Mar 1984

5340-14-546-7688
Angle Bracket

145467688
RA1M705936111A1: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-14-478-5097
Rod End Connector

144785097
PM1A196160001: RNCC: 3 | RNVC: 2
PM1A196160001: RNCC: 5 | RNVC: 2

8 Nov 1995

5340-14-441-9963
Mounting Plate

144419963
7541140P016: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-305-2162
Clamping Catch

143052162
G006ZI: RNCC: 3 | RNVC: 2
5000604479: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-495-0880
Mounting Bracket

144950880
F00147346: RNCC: 3 | RNVC: 2
F00147346: RNCC: 5 | RNVC: 9
F300 0T 018 3329: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-406-0514
Surface Bolt

144060514
M4Z5180904620: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-479-4539
Rod End Connector

144794539
K15985PA057A: RNCC: 3 | RNVC: 2

10 Jan 1996

5340-14-298-9711
Control Rod

142989711
401103603: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-500-8188
Section Block Clamp

145008188
E64009998046: RNCC: 3 | RNVC: 2
F300 0T 024 8390: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-441-9962
Mounting Plate

144419962
7541140P015: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-040-2631
Tubular Fairlead

140402631
NO PRIMARY REF14-040-2631: RNCC: 3 | RNVC: 2
709214: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-468-6889
Rod End Connector

144686889
A65895: RNCC: 3 | RNVC: 2

16 Mar 1994

5340-14-299-0690
Angle Bracket

142990690
341A62-1212-26: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-521-2752
Loop Clamp

145212752
24GE9-5: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-14-520-8215
Casement Fastener

145208215
10580927: RNCC: 3 | RNVC: 2

14 Jun 2000

5340-14-279-6423
Mortise Lock Set

142796423
3168DSANSBL0CSURETENICLE: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-496-1703
Mounting Plate

144961703
71442-8: RNCC: 3 | RNVC: 2
F300 0T 020 9842: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-459-6290
Pad Eye

144596290
15618058: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-14-261-2173
Rod End Connector

142612173
175-43-80: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-361-6009
Rim Latch Set

143616009
16293376: RNCC: 3 | RNVC: 2
16293376: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-14-031-1738
Flush Catch Claw

140311738
VDP5518: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-305-4053
Loop Clamp

143054053
512153050251: RNCC: 3 | RNVC: 2
30S25: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-303-3259
Retaining Strap

143033259
176898: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-420-6654
Bow Handle

144206654
10016900: RNCC: 3 | RNVC: 9
724024: RNCC: 5 | RNVC: 2
169: RNCC: 5 | RNVC: 9
N169: RNCC: 5 | RNVC: 9

16 Dec 1987

5340-14-432-4393
Angle Bracket

144324393
A4H2023: RNCC: 3 | RNVC: 2

13 Jun 1989

5340-14-461-2926
Webbing Strap

144612926
5000739351: RNCC: 3 | RNVC: 2
89287755: RNCC: 5 | RNVC: 2

3 Mar 1993

5340-14-440-6422
Corner Brace

144406422
16043918: RNCC: 3 | RNVC: 2

18 Jul 1990

5340-14-312-1165
Rod End Connector

143121165
157493: RNCC: 3 | RNVC: 2
157493: RNCC: 6 | RNVC: 9

1 Jan 1974

5340-14-452-0611
Mounting Plate

144520611
87126: RNCC: 3 | RNVC: 2
87126: RNCC: 5 | RNVC: 2

18 Dec 1991

5340-14-551-2049
Bolt And Spacer Kit

145512049
1ME50260255: RNCC: 3 | RNVC: 2

6 Sep 2006

5340-14-447-2942
Mounting Bracket

144472942
5002178: RNCC: 3 | RNVC: 2

15 May 1991

5340-14-373-0591
Vent Plug

143730591
MAT012-02-00-1: RNCC: 3 | RNVC: 2

21 Sep 1981

5340-14-312-0507
Angle Bracket

143120507
23007137: RNCC: 3 | RNVC: 2
23007137-0: RNCC: 5 | RNVC: 2
HK2-260: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-318-8586
Shimmy Damper

143188586
0000118987: RNCC: 3 | RNVC: 2
0000118987: RNCC: 5 | RNVC: 9
118987: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-526-4629
Angle Bracket

145264629
RA1M706445110: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-550-4831
Mounting Bracket

145504831
RA1A702436141: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-555-0563
Lock Key

145550563
AE3-VP211: RNCC: 3 | RNVC: 2

25 Sep 2007

5340-14-532-6351
Mounting Plate

145326351
MAT291-0446F6: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-14-465-1718
Mounting Plate

144651718
365A65-8105-20: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-489-6559
Mounting Bracket

144896559
332A25-1391-00: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-377-1273
Runner

143771273
AM922-637A: RNCC: 3 | RNVC: 2

17 May 1982

5340-14-386-5708
Retaining Strap

143865708
262-20-75060-68: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-398-9780
Access Cover

143989780
NO PRIMARY REF14-398-9780: RNCC: 3 | RNVC: 2
31716: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-362-3766
Access Cover

143623766
A116-02: RNCC: 3 | RNVC: 2
A116-02: RNCC: 3 | RNVC: 9

19 Mar 1980

5340-14-364-5892
Access Cover

143645892
NO PRIMARY REF14-364-5892: RNCC: 3 | RNVC: 2
5000494253: RNCC: 5 | RNVC: 2
59-24-0197: RNCC: 5 | RNVC: 9
5000494253: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-344-6136
Access Cover

143446136
NO PRIMARY REF14-344-6136: RNCC: 3 | RNVC: 2
31-405-900: RNCC: 5 | RNVC: 9

9 Sep 1977

5340-14-398-2789
Access Cover

143982789
NO PRIMARY REF14-398-2789: RNCC: 3 | RNVC: 2
46511: RNCC: 5 | RNVC: 9
85-693-0001: RNCC: 6 | RNVC: 9

31 Jan 1985

5340-14-320-3584
Snap Hook

143203584
NT24-95MARS61/1077: RNCC: 2 | RNVC: 2

1 Jan 1975

5340-14-379-4297
Access Cover

143794297
NO PRIMARY REF14-379-4297: RNCC: 3 | RNVC: 2
3511-314-65431: RNCC: 5 | RNVC: 9

1 Oct 1982

5340-14-263-6980
Angle Bracket

142636980
262-10-21570-09: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-428-4348
Loop Clamp

144284348
78653-12: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-032-1039
Access Cover

140321039
341A81-1083-00: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-471-0310
Mounting Bracket

144710310
402521: RNCC: 3 | RNVC: 2
402521-001: RNCC: 5 | RNVC: 9

20 Jul 1994

5340-14-264-9394
Turnbuckle Body

142649394
11603: RNCC: 3 | RNVC: 2
444-11-065-382: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-419-3944
Control Rod

144193944
6H1-41241-00: RNCC: 3 | RNVC: 2

16 Oct 1987

5340-14-204-1309
Expansion Plug

142041309
3130S45-00-103: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-542-9980
Access Cover

145429980
SH2759-03-11: RNCC: 3 | RNVC: 2

18 Aug 2004

5340-14-510-7047
Loop Clamp

145107047
NO PRIMARY REF14-510-7047: RNCC: 3 | RNVC: 2
H119 AN/UPM 6B/80058: RNCC: 5 | RNVC: 9

4 Nov 1998

5340-14-444-9763
Detent Plunger

144449763
11-955-902: RNCC: 3 | RNVC: 2
11-955-902: RNCC: 5 | RNVC: 9

30 Jan 1991

5340-14-550-4977
Mounting Bracket

145504977
6801DOC212002: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-312-8496
Cover Strip

143128496
160-12046-19: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-552-1524
Angle Bracket

145521524
RA1B701776195: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-14-515-3192
Mounting Bracket

145153192
1704407700: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-368-3144
Access Cover

143683144
Q12403-81: RNCC: 3 | RNVC: 2
2135910: RNCC: 5 | RNVC: 2
2135910: RNCC: 5 | RNVC: 2

20 Feb 1981

5340-14-204-2233
Loop Clamp

142042233
MT12GN: RNCC: 3 | RNVC: 2
MT12GN: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-14-502-7299
Access Cover

145027299
1264225: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-233-3326
Bow Handle

142333326
3160S73-68-012: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-456-6936
Clamping Catch

144566936
40146795: RNCC: 3 | RNVC: 2

24 Jul 1992

5340-14-351-5202
Control Rod

143515202
A1072: RNCC: 3 | RNVC: 2

12 Sep 1978

5340-14-507-9857
Angle Bracket

145079857
4773120070: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-490-0866
Mounting Bracket

144900866
29400146: RNCC: 3 | RNVC: 2

10 Sep 1997

5340-14-543-3093
Mounting Bracket

145433093
9105100P017: RNCC: 3 | RNVC: 2

19 Oct 2004

5340-14-449-3804
Cover Strip

144493804
DA1N201732425: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-546-5931
Angle Bracket

145465931
RA1M701202211A1N1: RNCC: 3 | RNVC: 2

21 Jul 2005

5340-14-401-1060
Angle Bracket

144011060
605368: RNCC: 3 | RNVC: 2

29 May 1985

5340-14-530-3234
Surface Bolt

145303234
39485539: RNCC: 3 | RNVC: 2

29 May 2002

5340-14-519-4023
Screw Hook

145194023
CR: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-457-5963
Bow Handle

144575963
PM1A795500410: RNCC: 3 | RNVC: 2
PM1A795500410: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-522-1560
Angle Bracket

145221560
D55869: RNCC: 3 | RNVC: 2
D55869: RNCC: 5 | RNVC: 2

4 Oct 2000

5340-14-457-6133
Block Clamp

144576133
PM1A689304200: RNCC: 3 | RNVC: 2
PM1A689304200: RNCC: 5 | RNVC: 2

10 Sep 1992

Load More Results