What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 100 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 100 of 446

5340-14-508-6385
Synchro Clamp

145086385
K15241PC500AREP118: RNCC: 3 | RNVC: 2

23 Sep 1998

5340-14-535-4629
Pipe Hanger

145354629
3450000044: RNCC: 3 | RNVC: 2
5010260612: RNCC: 5 | RNVC: 2

27 May 2003

5340-14-525-1817
Mounting Plate

145251817
14210700N: RNCC: 3 | RNVC: 2
06310P105006: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-405-0350
Bow Handle

144050350
42645: RNCC: 3 | RNVC: 9

20 Nov 1985

5340-14-476-3453
Mounting Bracket

144763453
91373: RNCC: 3 | RNVC: 2

7 Jun 1995

5340-14-554-5535
Mounting Plate

145545535
0298197330: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-14-446-4877
Mounting Plate

144464877
292009B: RNCC: 3 | RNVC: 2

20 Mar 1991

5340-14-533-6305
Cover Strip

145336305
D116199: RNCC: 3 | RNVC: 2

12 Feb 2003

5340-14-513-8591
Loop Clamp

145138591
642739: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-549-0948
Angle Bracket

145490948
RA1M704734651N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-537-3597
Mounting Bracket

145373597
5010467011: RNCC: 3 | RNVC: 2

23 Oct 2003

5340-14-375-1825
Loop Clamp

143751825
16047321: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-331-0708
Expansion Plug

143310708
0000189824: RNCC: 3 | RNVC: 2
0000189824: RNCC: 5 | RNVC: 9
189824: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-533-1376
Mounting Bracket

145331376
10618739: RNCC: 3 | RNVC: 2

23 Jan 2003

5340-14-539-1279
Loop Clamp

145391279
NGM0099087200132: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-373-6085
Webbing Strap

143736085
136-175: RNCC: 3 | RNVC: 2

13 Nov 1981

5340-14-236-5670
Rod End Clevis

142365670
321A21-0480-20: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-387-5169
Bumper

143875169
GSM473-039F2: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-14-407-2285
Access Cover

144072285
NO PRIMARY REF14-407-2285: RNCC: 3 | RNVC: 2
89239253: RNCC: 5 | RNVC: 2
619760: RNCC: 5 | RNVC: 9

12 Feb 1986

5340-14-353-6770
Loop Clamp

143536770
501-804-549-0: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-328-5982
Metal Grille

143285982
321A58-0824-28: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-529-1994
Angle Bracket

145291994
457-10630-000: RNCC: 3 | RNVC: 2

15 Mar 2002

5340-14-364-5801
Anchor Strap

143645801
HY183-91: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-14-338-2269
Runner

143382269
S1440-5160-300: RNCC: 3 | RNVC: 2
85-689-1390: RNCC: 6 | RNVC: 9

6 Nov 1976

5340-14-435-2742
Mounting Bracket

144352742
332A13-1525-20: RNCC: 3 | RNVC: 2
F300 0T 012 8882: RNCC: 5 | RNVC: 9

2 Nov 1989

5340-14-506-4346
Access Cover

145064346
NO PRIMARY REF14-506-4346: RNCC: 3 | RNVC: 2
Z239-1574-00: RNCC: 5 | RNVC: 2

29 Apr 1998

5340-14-434-1774
Loop Holder

144341774
441067: RNCC: 3 | RNVC: 2
441067: RNCC: 5 | RNVC: 9

11 Sep 1989

5340-14-512-9375
Mounting Plate

145129375
330050: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-303-5835
Access Cover

143035835
0264750370: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-497-6421
Mounting Plate

144976421
5S4545: RNCC: 3 | RNVC: 2
F300 0T 023 4466: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-457-0112
Plug Button

144570112
1080330002: RNCC: 3 | RNVC: 2
1080330002: RNCC: 5 | RNVC: 2

30 Jul 1992

5340-14-366-7835
Access Cover

143667835
253583: RNCC: 3 | RNVC: 2
253583: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-383-3988
Loop Clamp

143833988
386482: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-549-7518
Detent Plunger

145497518
8003700K01: RNCC: 3 | RNVC: 2

9 May 2006

5340-14-382-4842
Mounting Plate

143824842
20068802: RNCC: 3 | RNVC: 2
20068802: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-519-0879
Access Cover

145190879
1SH41598655: RNCC: 3 | RNVC: 2

7 Mar 2000

5340-14-477-2821
Retaining Clip

144772821
47SC1518: RNCC: 3 | RNVC: 2
187580: RNCC: 3 | RNVC: 2
52687: RNCC: 3 | RNVC: 9
187580: RNCC: 5 | RNVC: 2

4 Aug 1995

5340-14-455-0985
Locking Stay

144550985
21400B21538T1: RNCC: 3 | RNVC: 2

1 May 1992

5340-14-535-4230
Mounting Bracket

145354230
5430121754: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-473-3276
Bumper

144733276
F50B216007005: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-425-0989
Plug Button

144250989
0857597R01: RNCC: 3 | RNVC: 2

21 Jun 1988

5340-14-441-5459
Access Cover

144415459
20131818: RNCC: 3 | RNVC: 2
20131818: RNCC: 3 | RNVC: 9

3 Sep 1990

5340-14-543-0739
Bumper

145430739
S711A4012276: RNCC: 3 | RNVC: 2

18 Aug 2004

5340-14-532-3571
Cover Strip

145323571
RA1M111117011: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-509-6801
Cover Strip

145096801
RA1M705232211N1: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-457-4935
Loop Clamp

144574935
HB12AX: RNCC: 3 | RNVC: 2
A12AX70D72: RNCC: 5 | RNVC: 2

9 Sep 1992

5340-14-542-2987
Mounting Bracket

145422987
962554108: RNCC: 3 | RNVC: 2
962554108: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-507-6029
Blank Panel

145076029
10473982: RNCC: 3 | RNVC: 2

27 Jul 1998

5340-14-455-5676
Mounting Bracket

144555676
1060205: RNCC: 3 | RNVC: 2
1060205: RNCC: 5 | RNVC: 9
5044653: RNCC: 5 | RNVC: 9

28 May 1992

5340-14-489-8752
Filler Opening Cap

144898752
NO PRIMARY REF 14-489-8752: RNCC: 3 | RNVC: 2
500.0.12: RNCC: 5 | RNVC: 9

27 Aug 1997

5340-14-306-0580
Bow Handle

143060580
A10-79-071-00-0: RNCC: 3 | RNVC: 2
A10-79-071-00-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-373-3143
Angle Bracket

143733143
4B99-006: RNCC: 3 | RNVC: 2

21 Oct 1981

5340-14-428-2939
Bumper

144282939
330A22-0487-23: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-578-2792
Utility Resilient Mount

145782792
HH11-70-03CIM: RNCC: 3 | RNVC: 2
EDP120001_FT002: RNCC: 5 | RNVC: 2

18 Nov 2013

5340-14-563-2340
Utility Resilient Mount

145632340
08460000: RNCC: 3 | RNVC: 2
HH8-50TM2: RNCC: 5 | RNVC: 2

15 Jan 2010

5340-14-393-7788
Loop Clamp

143937788
NO PRIMARY REF14-393-7788: RNCC: 3 | RNVC: 2
FA006PREST047004: RNCC: 5 | RNVC: 9

23 Jun 1984

5340-14-456-8726
Arched Cushion

144568726
MAT169-0012F20DE19: RNCC: 3 | RNVC: 2

24 Jul 1992

5340-14-387-2293
Loop Clamp

143872293
E1242-2: RNCC: 3 | RNVC: 2
E12422: RNCC: 5 | RNVC: 2
5000803475: RNCC: 5 | RNVC: 2

15 Sep 1983

5340-14-550-0120
Retaining Strap

145500120
EA6M702-33-886: RNCC: 3 | RNVC: 2

24 May 2006

5340-14-490-2852
Mounting Plate

144902852
J05085-04-0200P020: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-505-9457
Angle Bracket

145059457
MS1-040B: RNCC: 3 | RNVC: 9
6-90-1-03/58: RNCC: 5 | RNVC: 2
MS1-040: RNCC: 5 | RNVC: 9

30 Mar 1998

5340-14-371-5433
Rod End Clevis

143715433
360A25-1235-20Z: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-468-2765
Metal Molding

144682765
M589-112130: RNCC: 3 | RNVC: 2

16 Feb 1994

5340-14-438-4104
Mounting Bracket

144384104
12-15-01-219: RNCC: 3 | RNVC: 9

21 Mar 1990

5340-14-524-8392
Mounting Plate

145248392
IF-244-087: RNCC: 3 | RNVC: 2
IF244-087: RNCC: 5 | RNVC: 9

20 Apr 2001

5340-14-354-5036
Rod End Clevis

143545036
EA1M171-16-04: RNCC: 3 | RNVC: 2

31 Jan 1979

5340-14-257-1421
Mounting Bracket

142571421
330A22-2223-00: RNCC: 3 | RNVC: 2
330A22-2223-0000: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-443-5572
Mounting Plate

144435572
CAP230-70-13-05: RNCC: 3 | RNVC: 9
CAP230-70-13-05A: RNCC: 5 | RNVC: 9
CAP230-70-13-05A: RNCC: 5 | RNVC: 9

28 Nov 1990

5340-14-383-3643
Retaining Strap

143833643
M435-216102: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-536-6935
Mounting Plate

145366935
P1-R97068-01-32-03REP8: RNCC: 3 | RNVC: 9
SYQ3620: RNCC: 5 | RNVC: 2

10 Sep 2003

5340-14-554-1792
Access Cover

145541792
CLB501-610-430: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-483-0936
Access Cover

144830936
7110-916-17-00: RNCC: 3 | RNVC: 2

8 Aug 1996

5340-14-539-4341
Mounting Plate

145394341
457-13454-000: RNCC: 3 | RNVC: 2
457-13454-000: RNCC: 5 | RNVC: 2

14 Jan 2004

5340-14-391-0161
Vent Plug

143910161
81001-40: RNCC: 3 | RNVC: 2

1 Mar 1984

5340-14-403-3494
Access Cover

144033494
5630715: RNCC: 3 | RNVC: 2
FOE5630715: RNCC: 5 | RNVC: 9

21 Aug 1985

5340-14-481-2158
Angle Bracket

144812158
5010113440: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-14-453-3632
Angle Bracket

144533632
39716C: RNCC: 3 | RNVC: 2

19 Feb 1992

5340-14-341-7471
Retaining Strap

143417471
150674: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-455-5969
Expansion Plug

144555969
1002563M02: RNCC: 3 | RNVC: 2

28 May 1992

5340-14-301-5377
Expansion Shield

143015377
TETRA38: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-485-9962
Angle Bracket

144859962
PA01PD030109: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-14-394-8912
Bumper

143948912
440006: RNCC: 3 | RNVC: 2
440006: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-354-7327
Access Cover

143547327
110216: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-367-6467
Access Cover

143676467
Q18234-08: RNCC: 3 | RNVC: 2
301216: RNCC: 5 | RNVC: 2
Q18234-08: RNCC: 5 | RNVC: 2

19 Jan 1981

5340-14-389-0077
Control Rod

143890077
E163-05201REP225: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-503-1945
Loop Clamp

145031945
78654-02: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-438-4745
Bumper

144384745
332A58-5505-22: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-569-3298
Utility Resilient Mount

145693298
E1N-3454-56: RNCC: 3 | RNVC: 2

5 Sep 2011

5340-14-505-1466
Mounting Bracket

145051466
SPR4A536-14-212: RNCC: 3 | RNVC: 2
5310AA2001238: RNCC: 6 | RNVC: 9

11 Mar 1998

5340-14-351-1503
Pad Eye

143511503
AY823-286A: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-387-9504
Mounting Plate

143879504
365A33-6197-21: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-14-261-2839
Rod End Connector

142612839
175-74-38: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-360-4261
Rod End Connector

143604261
EPP1: RNCC: 3 | RNVC: 2
85-688-5284: RNCC: 6 | RNVC: 9

23 Nov 1979

5340-14-375-4335
Loop Clamp

143754335
77-13-600-01-6: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-574-2069
Utility Access Door

145742069
170E520-00: RNCC: 3 | RNVC: 2

17 Dec 2012

5340-14-449-2467
Rod End Clevis

144492467
NO PRIMARY REF14-449-2467: RNCC: 3 | RNVC: 2
239338: RNCC: 5 | RNVC: 2

7 Aug 1991

5340-14-413-1504
Angle Bracket

144131504
23115519-1: RNCC: 3 | RNVC: 2
23115519: RNCC: 5 | RNVC: 2

26 Nov 1986

5340-14-337-3972
Runner

143373972
80-350139: RNCC: 3 | RNVC: 2
85-350-1390: RNCC: 6 | RNVC: 9

7 Oct 1976

5340-14-302-0118
Angle Bracket

143020118
A10-19-416-66-1: RNCC: 3 | RNVC: 2
A10-19-416-66-1: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-347-9480
Casement Fastener

143479480
AY823-281A: RNCC: 3 | RNVC: 9
AY823-281A: RNCC: 5 | RNVC: 2

29 Mar 1978

5340-14-391-9655
Loop Clamp

143919655
50011-3-18: RNCC: 3 | RNVC: 2
620-849-494-0: RNCC: 5 | RNVC: 2
NSA935807C18: RNCC: 5 | RNVC: 2
50011-3-18: RNCC: 5 | RNVC: 9

21 Mar 1984

5340-14-269-4322
Flush Catch

142694322
NO PRIMARY REF14-269-4322: RNCC: 3 | RNVC: 2
268BT38F0UGA: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-551-2919
Angle Bracket

145512919
RA1M704726643: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-465-4961
Mounting Plate

144654961
365A61-5100-BF: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-480-9134
Metal Grille

144809134
HB50A66: RNCC: 3 | RNVC: 2
HB50A66LS100L: RNCC: 3 | RNVC: 2

11 Apr 1996

5340-14-535-7550
Mounting Bracket

145357550
T943A2001121: RNCC: 3 | RNVC: 2

25 Jun 2003

5340-14-548-1173
Loop Clamp

145481173
5010571721: RNCC: 3 | RNVC: 2

12 Dec 2005

5340-14-552-1557
Pipe Hanger

145521557
DA1N201200043A1: RNCC: 3 | RNVC: 2

29 Nov 2006

5340-14-500-7156
Butt Hinge

145007156
10294776: RNCC: 3 | RNVC: 2
F300 0T 024 7350: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-517-6225
Loop Clamp

145176225
51100005017: RNCC: 3 | RNVC: 2
15N17: RNCC: 5 | RNVC: 2
15NA17: RNCC: 5 | RNVC: 2

5 Jan 2000

5340-14-269-4008
Retaining Clip

142694008
1509PHOSPHATE: RNCC: 3 | RNVC: 2
0221122015: RNCC: 5 | RNVC: 2
1509: RNCC: 5 | RNVC: 9
0221122015: RNCC: 5 | RNVC: 9
221122015: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-462-0634
Mounting Bracket

144620634
BLC23030: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-14-529-9195
Mounting Bracket

145299195
RLSXS1B00: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-518-9795
Synchro Clamp

145189795
704619: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-352-7277
Support Hook

143527277
573899359: RNCC: 3 | RNVC: 2

14 Nov 1978

5340-14-442-0954
Mounting Plate

144420954
204010097: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-14-444-5153
Mounting Bracket

144445153
123033103: RNCC: 3 | RNVC: 9

14 Jan 1991

5340-14-341-6736
Mending Plate

143416736
910865: RNCC: 3 | RNVC: 2
910865: RNCC: 5 | RNVC: 9

14 Apr 1977

5340-14-541-6509
Webbing Strap

145416509
1346293: RNCC: 3 | RNVC: 2

17 Jun 2004

5340-14-382-4192
Webbing Strap

143824192
234948: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-386-0653
Strap Fastener Loop

143860653
9452-03: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-534-5470
Butt Hinge

145345470
40-1-3329: RNCC: 3 | RNVC: 2

26 Mar 2003

5340-14-331-7196
Bumper

143317196
121S22-814-18-0: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-493-6444
Bumper

144936444
BC10S-6K: RNCC: 3 | RNVC: 2
BC10S6K: RNCC: 5 | RNVC: 2

8 Oct 1997

5340-14-387-8955
Loop Clamp

143878955
3-2607-01-40A: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-14-293-3509
Pipe Hanger

142933509
121E52-168-00-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-544-4041
Expansion Shield

145444041
059360: RNCC: 3 | RNVC: 2
291-565: RNCC: 5 | RNVC: 2
SC086701: RNCC: 6 | RNVC: 9

27 Jan 2005

5340-14-542-4389
Bow Handle

145424389
MX3065A00: RNCC: 3 | RNVC: 2

13 Jul 2004

5340-14-457-6064
Angle Bracket

144576064
PM1A835402002A1: RNCC: 3 | RNVC: 2
PM1A835402002A1: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-359-7339
Access Cover

143597339
BAZ3814: RNCC: 3 | RNVC: 2

15 Oct 1979

5340-14-423-2547
Access Cover

144232547
412483-53: RNCC: 3 | RNVC: 2
412483-53: RNCC: 5 | RNVC: 9

14 Apr 1988

5340-14-554-8867
Loop Clamp

145548867
78651DH23AG: RNCC: 1 | RNVC: 2
78651DH23AG: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-486-5920
Retaining Strap

144865920
F00147352: RNCC: 3 | RNVC: 2
F00147352: RNCC: 5 | RNVC: 9

26 Mar 1997

5340-14-524-2042
Mounting Bracket

145242042
ST159-2M833-3P23: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-357-0471
Retaining Strap

143570471
388314: RNCC: 3 | RNVC: 2
388314: RNCC: 6 | RNVC: 9

7 Jun 1979

5340-14-394-9146
Webbing Strap

143949146
20155052: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-446-4959
Mounting Bracket

144464959
81004667: RNCC: 3 | RNVC: 2

20 Mar 1991

5340-14-372-2266
Detent Plunger

143722266
D986: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-494-4842
Access Cover

144944842
T54 907 90: RNCC: 3 | RNVC: 2
F300 0T 017 3897: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-452-3861
Block Clamp

144523861
432E3232E090: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-452-1359
Mounting Bracket

144521359
246754: RNCC: 3 | RNVC: 2
89414940: RNCC: 5 | RNVC: 2

18 Dec 1991

5340-14-448-8948
Access Cover

144488948
DHV26142: RNCC: 3 | RNVC: 2
DHV26142: RNCC: 5 | RNVC: 9

24 Jul 1991

5340-14-484-5230
Access Cover

144845230
ZL1690: RNCC: 3 | RNVC: 2

21 Nov 1996

5340-14-536-1015
Mounting Bracket

145361015
803228555010: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-480-9352
Mounting Plate

144809352
38021245: RNCC: 3 | RNVC: 2
38021245: RNCC: 5 | RNVC: 9

11 Apr 1996

5340-14-372-6111
Rigid Caster

143726111
3310547: RNCC: 3 | RNVC: 2
PJN03-03: RNCC: 5 | RNVC: 2

21 Sep 1981

5340-14-502-9937
Cover Strip

145029937
330A22-2417-29: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-321-6377
Rod End Clevis

143216377
702A10-0038-01: RNCC: 3 | RNVC: 2
85-689-1382: RNCC: 6 | RNVC: 9

1 Jan 1975

5340-14-508-0667
Mounting Bracket

145080667
02540035010: RNCC: 3 | RNVC: 2
254035-10: RNCC: 5 | RNVC: 2
3597470019504: RNCC: 5 | RNVC: 2
91762606: RNCC: 5 | RNVC: 9

26 Aug 1998

5340-14-494-9232
Mounting Bracket

144949232
NO PRIMARY REF14-494-9232: RNCC: 3 | RNVC: 2
5448367: RNCC: 5 | RNVC: 9
F300 0T 018 0792: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-526-4723
Pipe Hanger

145264723
78731-038-050: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-359-6842
Snap Hook

143596842
22202-163-060: RNCC: 3 | RNVC: 2

15 Oct 1979

5340-14-261-9377
Retaining Strap

142619377
15913121: RNCC: 3 | RNVC: 2
15913121: RNCC: 3 | RNVC: 2
15913121: RNCC: 3 | RNVC: 2
15-913-121: RNCC: 5 | RNVC: 2
M913121: RNCC: 5 | RNVC: 2
15913121: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-333-4404
Rod End Clevis

143334404
A10-28-714-01-0: RNCC: 3 | RNVC: 2
A10-28-714-01-0: RNCC: 5 | RNVC: 2
A10-28-714-01-0: RNCC: 5 | RNVC: 2
A10-28-714-01-0: RNCC: 5 | RNVC: 2
85-688-6747: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-319-8284
Quick Release Pin

143198284
121S83-556-00-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-472-4820
Mounting Bracket

144724820
138E978-00: RNCC: 3 | RNVC: 2
138E978-00: RNCC: 5 | RNVC: 9

26 Oct 1994

5340-14-460-8755
Rod End Connector

144608755
10-1-07: RNCC: 3 | RNVC: 2

12 Feb 1993

5340-14-522-0864
Mounting Bracket

145220864
015-3459-070: RNCC: 3 | RNVC: 2
015 3459 070: RNCC: 5 | RNVC: 2

4 Oct 2000

5340-14-259-5167
Runner

142595167
RU761-43M625-1P3: RNCC: 3 | RNVC: 2
761-43M625-1P3: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-358-3185
Bumper

143583185
NO PRIMARY REF14-358-3185: RNCC: 3 | RNVC: 2
560651: RNCC: 5 | RNVC: 9

13 Aug 1979

5340-14-386-5516
Cover Strip

143865516
DA2C291453501A1: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-457-2733
Mounting Plate

144572733
38021148: RNCC: 3 | RNVC: 2
38021148: RNCC: 5 | RNVC: 9

20 Aug 1992

5340-14-365-5560
Angle Bracket

143655560
A11A221160002: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-342-0259
Clamping Catch

143420259
GE03ZB: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-532-3803
Angle Bracket

145323803
RA1M705646121N1: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-519-5589
Mounting Plate

145195589
921144: RNCC: 3 | RNVC: 9

22 Mar 2000

5340-14-352-7553
Bow Handle

143527553
140107: RNCC: 3 | RNVC: 2
140107: RNCC: 5 | RNVC: 2

14 Nov 1978

5340-14-301-4316
Bow Handle

143014316
14SD989: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-482-6813
Angle Bracket

144826813
47134342: RNCC: 3 | RNVC: 2

18 Jul 1996

5340-14-483-6710
Bridge Clamp

144836710
38167247: RNCC: 3 | RNVC: 2
38167247: RNCC: 5 | RNVC: 9

27 Sep 1996

5340-14-512-5736
Mounting Bracket

145125736
3BM01656AAAA: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-480-0516
Mounting Plate

144800516
10309969: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-458-1430
Mounting Bracket

144581430
45056124: RNCC: 3 | RNVC: 2
45056124: RNCC: 5 | RNVC: 9

8 Oct 1992

5340-14-533-6605
Mounting Plate

145336605
F1262318: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-14-537-4678
Clamping Catch

145374678
6501OEA120: RNCC: 3 | RNVC: 2
6501OEA120000: RNCC: 5 | RNVC: 2

3 Nov 2003

5340-14-471-5283
Bow Handle

144715283
5260004A: RNCC: 3 | RNVC: 2

31 Aug 1994

5340-14-494-4139
Mounting Bracket

144944139
45282048: RNCC: 3 | RNVC: 2
45282048: RNCC: 3 | RNVC: 9
F300 0T 017 2899: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-509-2118
Runner

145092118
128135: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-374-6149
Angle Bracket

143746149
5000535807: RNCC: 3 | RNVC: 2
5000535807: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-263-4925
Loop Clamp

142634925
R111186: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-451-5124
Mounting Bracket

144515124
85045: RNCC: 3 | RNVC: 2

21 Nov 1991

5340-14-535-2450
Mounting Bracket

145352450
6501DDP110: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-394-8008
Rim Lock

143948008
21400N21613T1: RNCC: 3 | RNVC: 2
M4ZS301D1449B: RNCC: 5 | RNVC: 2

2 Oct 1984

5340-14-437-5295
Angle Bracket

144375295
39073: RNCC: 3 | RNVC: 2

6 Feb 1990

5340-14-547-5212
Angle Bracket

145475212
RA1M704734181N1: RNCC: 3 | RNVC: 2

15 Oct 2005

5340-14-501-6903
Mounting Bracket

145016903
45279646: RNCC: 3 | RNVC: 2
45279646: RNCC: 3 | RNVC: 9

5 Nov 1997

5340-14-537-6232
Mounting Bracket

145376232
372848: RNCC: 3 | RNVC: 2

12 Nov 2003

5340-14-533-8922
Cover Strip

145338922
SZ08.250.946: RNCC: 3 | RNVC: 2
08-250-946: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-438-1513
Mounting Plate

144381513
330A25-2131-40: RNCC: 3 | RNVC: 2

7 Mar 1990

5340-14-328-2996
Butt Hinge

143282996
MS7524-3-7200: RNCC: 3 | RNVC: 2
MS7524-3-1830: RNCC: 3 | RNVC: 2
MS7524-3: RNCC: 5 | RNVC: 2
MS7524-3-1830: RNCC: 5 | RNVC: 2
MS7524-3: RNCC: 5 | RNVC: 9
MS7524-3-1830: RNCC: 5 | RNVC: 9
MS7524-3: RNCC: 5 | RNVC: 9
85-662-5260: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-241-1155
Lock Bolt

142411155
321A58-0414-07: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-403-9111
Runner

144039111
NO PRIMARY REF14-403-9111: RNCC: 3 | RNVC: 2
P3H011347-00: RNCC: 5 | RNVC: 9

11 Sep 1985

5340-14-533-8667
Cover Strip

145338667
SZ12.701.500: RNCC: 3 | RNVC: 2
12-701-500: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-449-9908
Mounting Bracket

144499908
993-04-04-01: RNCC: 3 | RNVC: 2

18 Sep 1991

5340-14-339-5383
Eye Hook

143395383
3130S05-00-462: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-491-0598
Mounting Bracket

144910598
NO PRIMARY REF14-494-7138: RNCC: 3 | RNVC: 2
1206-011: RNCC: 5 | RNVC: 9
1206011: RNCC: 5 | RNVC: 9
F300 0T 001 3340: RNCC: 6 | RNVC: 9
F300 0T 017 8216: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-346-0182
Runner

143460182
M334-01-20-00-19: RNCC: 3 | RNVC: 2
453-50021-000: RNCC: 3 | RNVC: 2
453-50021-000: RNCC: 5 | RNVC: 2
45350021000: RNCC: 5 | RNVC: 2
453-50021-000: RNCC: 5 | RNVC: 9

5 Nov 1977

5340-14-501-1279
Mounting Bracket

145011279
8866148: RNCC: 3 | RNVC: 2
F300 0T 025 1679: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-293-3893
Access Cover

142933893
0249922720: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-513-8858
Mounting Bracket

145138858
2936000: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-508-4727
Handwheel

145084727
260L907: RNCC: 3 | RNVC: 2
260L907: RNCC: 5 | RNVC: 2

14 Sep 1998

5340-14-517-3987
Utility Access Door

145173987
803481140115: RNCC: 3 | RNVC: 2
SDM803481140115: RNCC: 5 | RNVC: 9

8 Dec 1999

5340-14-499-9463
Access Cover

144999463
576556: RNCC: 3 | RNVC: 2
F300 0T 023 9411: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-311-8541
Access Cover

143118541
0064587010: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-528-8102
Access Cover

145288102
RA1M622244820A2: RNCC: 3 | RNVC: 2

18 Feb 2002

5340-14-489-8090
Anchor Strap

144898090
0100454: RNCC: 3 | RNVC: 2
FOE0100454: RNCC: 5 | RNVC: 9

20 Aug 1997

5340-14-495-1410
Access Cover

144951410
911373: RNCC: 3 | RNVC: 2
F300 0T 018 4441: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-516-2522
Cushioning Pad

145162522
MB2366F01: RNCC: 3 | RNVC: 2

15 Sep 1999

5340-14-449-1442
Anchor Strap

144491442
BAZ639184: RNCC: 3 | RNVC: 2

31 Jul 1991

5340-14-477-0715
Plug Button

144770715
T700A2899002003: RNCC: 3 | RNVC: 2

19 Jul 1995

5340-14-505-9178
Access Cover

145059178
8816412000: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-285-5495
Rod End Clevis

142855495
ES42609: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-523-9076
Access Cover

145239076
45284437: RNCC: 3 | RNVC: 2

12 Feb 2001

5340-14-501-6713
Angle Bracket

145016713
45279694: RNCC: 3 | RNVC: 2
45279694: RNCC: 3 | RNVC: 9

5 Nov 1997

5340-14-520-8938
Luggage Handle

145208938
PLATI00011: RNCC: 3 | RNVC: 2

21 Jun 2000

5340-14-266-9614
Leaf Spring

142669614
222349: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-312-1211
Retaining Strap

143121211
181053: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-481-2165
Angle Bracket

144812165
5010113457: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-14-551-2769
Angle Bracket

145512769
RA1B701716211: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-488-5768
Mounting Plate

144885768
632606: RNCC: 3 | RNVC: 2

21 May 1997

5340-14-397-3508
Mounting Plate

143973508
16601007: RNCC: 3 | RNVC: 2

6 Dec 1984

5340-14-298-8639
Retaining Strap

142988639
178840: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-382-3339
Retaining Strap

143823339
228615: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-459-9578
Rim Lock

144599578
1509197B00: RNCC: 3 | RNVC: 2

6 Jan 1993

5340-14-549-0602
Angle Bracket

145490602
RA1M112141441N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-550-4692
Angle Bracket

145504692
RA1B701712581N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-298-8532
Mending Plate

142988532
42473: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-343-1923
Access Cover

143431923
15A1325-11: RNCC: 3 | RNVC: 2
15A1324: RNCC: 5 | RNVC: 2

16 Jun 1977

5340-14-449-8292
Mounting Bracket

144498292
993-03-13: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-14-500-5731
Access Cover

145005731
NO PRIMARY REF14-500-5731: RNCC: 3 | RNVC: 2
743: RNCC: 5 | RNVC: 9
F300 0T 024 5915: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-478-2696
Mounting Bracket

144782696
312-08210-011: RNCC: 3 | RNVC: 2

18 Oct 1995

5340-14-545-5629
Mounting Bracket

145455629
341A27-5124-20: RNCC: 3 | RNVC: 2

20 Apr 2005

5340-14-495-9236
Mounting Plate

144959236
NO PRIMARY REF14-495-9236: RNCC: 3 | RNVC: 2
ANL641305-01: RNCC: 5 | RNVC: 9
F300 0T 020 5213: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-351-4347
Retaining Strap

143514347
73-023-518: RNCC: 3 | RNVC: 2

12 Sep 1978

5340-14-325-4811
Access Cover

143254811
C11AA0301-901: RNCC: 3 | RNVC: 2
C11AA0301-901: RNCC: 5 | RNVC: 2
C11AA0301-901: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-457-6785
Runner

144576785
A03037-10-2010P100: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-469-0971
Synchro Clamp

144690971
301-573-002-0: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-14-391-7893
Runner

143917893
V2PM3243-119469: RNCC: 3 | RNVC: 2
V2PM3243-119469: RNCC: 5 | RNVC: 2

21 Mar 1984

5340-14-482-5202
Mounting Bracket

144825202
21085: RNCC: 3 | RNVC: 2
21085-000-00: RNCC: 5 | RNVC: 2

11 Jul 1996

5340-14-478-9739
Access Cover

144789739
452-14789-000: RNCC: 3 | RNVC: 2

4 Dec 1995

5340-14-507-1008
Section Block Clamp

145071008
321A60-4617-21: RNCC: 3 | RNVC: 2

10 Jun 1998

5340-14-253-8883
Strap Hinge

142538883
LN331087-322121302: RNCC: 2 | RNVC: 2
LN331087-322121302: RNCC: 3 | RNVC: 2
32-212-13-02: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-231-9239
Loop Clamp

142319239
501-217-712-0: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-545-8771
Mounting Bracket

145458771
PA6.6-BR50: RNCC: 3 | RNVC: 2

24 May 2005

5340-14-296-8428
Bow Handle

142968428
20178-4: RNCC: 3 | RNVC: 2
20178: RNCC: 3 | RNVC: 9
P0B3: RNCC: 5 | RNVC: 2
650915: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-213-1500
Mounting Bracket

142131500
T863-56M1P11C: RNCC: 3 | RNVC: 2
T86356M1P11: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-466-5670
Synchro Clamp

144665670
052-500-74-01: RNCC: 3 | RNVC: 2

16 Nov 1993

5340-14-455-8883
Casement Fastener

144558883
NO PRIMARY REF14-455-8883: RNCC: 3 | RNVC: 2
575: RNCC: 5 | RNVC: 9

11 Jun 1992

5340-14-409-7004
Swivel Caster

144097004
SP2PA080-23L26: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-471-8850
Mounting Bracket

144718850
3160S73-24-400-1: RNCC: 3 | RNVC: 2

21 Sep 1994

5340-14-390-2749
Bail Handle

143902749
13-0-0001: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-233-3505
Retaining Strap

142333505
3130S72-12-301: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-433-7944
Friction Catch

144337944
Z310-021-000: RNCC: 3 | RNVC: 2

9 Aug 1989

5340-14-372-2803
Angle Bracket

143722803
227461REP1: RNCC: 3 | RNVC: 2
227461REP1: RNCC: 5 | RNVC: 9

1 Sep 1981

5340-14-529-2650
Mounting Plate

145292650
47044371: RNCC: 3 | RNVC: 2

20 Mar 2002

5340-14-386-8264
Doorknob

143868264
5290INOX: RNCC: 3 | RNVC: 2
6555: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-422-5641
Mending Plate

144225641
06173177: RNCC: 3 | RNVC: 2

10 Mar 1988

5340-14-456-8038
Mounting Bracket

144568038
306710: RNCC: 3 | RNVC: 2

24 Jul 1992

5340-14-381-2535
Access Cover

143812535
71419: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-457-5615
Door Holder

144575615
25.37840: RNCC: 3 | RNVC: 2
19209114: RNCC: 5 | RNVC: 2
2537840: RNCC: 5 | RNVC: 2
5045621: RNCC: 5 | RNVC: 9

10 Sep 1992

5340-14-364-0409
Rod End Clevis

143640409
1051010006: RNCC: 3 | RNVC: 2
1051010006: RNCC: 5 | RNVC: 2

7 Aug 1980

5340-14-336-7603
Angle Bracket

143367603
VDP0978: RNCC: 3 | RNVC: 2
VDPM01040: RNCC: 5 | RNVC: 2

7 Oct 1976

5340-14-304-2125
Access Cover

143042125
171736: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-546-2091
Mounting Bracket

145462091
RA1A703936227: RNCC: 3 | RNVC: 2

15 Jun 2005

5340-14-232-2976
Access Cover

142322976
DLT007435: RNCC: 3 | RNVC: 2
DLT07435: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-515-5741
Runner

145155741
21470010A: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-446-3950
Cushioning Pad

144463950
18F1606: RNCC: 3 | RNVC: 2

19 Mar 1991

5340-14-469-1626
Access Cover

144691626
969343P03: RNCC: 3 | RNVC: 2
969343P03: RNCC: 5 | RNVC: 9

11 Apr 1994

5340-14-031-7858
Rim Lock Set

140317858
CSEER0NISHTPCTBCIE: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-407-7285
Rod End Clevis

144077285
11-26576REP20: RNCC: 3 | RNVC: 2
11-26576REP20: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-14-533-3493
Utility Access Door

145333493
208981: RNCC: 3 | RNVC: 2

31 Jan 2003

5340-14-525-6893
Mounting Plate

145256893
20 242 160 6820: RNCC: 3 | RNVC: 2
89014: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-437-8089
Angle Bracket

144378089
007472010P: RNCC: 3 | RNVC: 2

21 Feb 1990

5340-14-446-6821
Mounting Plate

144466821
ST406M71P11E46: RNCC: 3 | RNVC: 2

9 Apr 1991

5340-14-523-2618
Mounting Plate

145232618
RA1M704135591A1: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-308-6453
Synchro Clamp

143086453
0205987080: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-545-9917
Bow Handle

145459917
19224533: RNCC: 3 | RNVC: 2

2 Jun 2005

5340-14-523-6445
Mounting Plate

145236445
D5725669: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-382-4410
Angle Bracket

143824410
4770201510: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-364-0354
Mending Plate

143640354
0120230048: RNCC: 3 | RNVC: 2
0120230048: RNCC: 5 | RNVC: 2

7 Aug 1980

5340-14-537-7393
Mounting Plate

145377393
PCC214: RNCC: 3 | RNVC: 2

19 Nov 2003

5340-14-517-6419
Mounting Bracket

145176419
CRM280170050: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-394-1621
Butt Hinge

143941621
1001-50X30LAIT0N: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-556-2151
Synchro Clamp

145562151
14100030985: RNCC: 3 | RNVC: 2

12 Feb 2008

5340-14-523-2010
Door Button

145232010
PM1A239222008N1: RNCC: 3 | RNVC: 2
PM1A239222008N1: RNCC: 5 | RNVC: 2

10 Jan 2001

5340-14-467-8534
Retaining Strap

144678534
164440: RNCC: 3 | RNVC: 2
89170025: RNCC: 5 | RNVC: 2

27 Jan 1994

5340-14-464-3302
Retaining Strap

144643302
5211302: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-548-6076
Angle Bracket

145486076
RA1B702346139: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-448-9907
Mounting Bracket

144489907
BAZ0444: RNCC: 3 | RNVC: 2

24 Jul 1991

5340-14-536-2617
Mounting Bracket

145362617
10211948: RNCC: 3 | RNVC: 2

22 Jul 2003

5340-14-513-2037
Loop Clamp

145132037
313101400: RNCC: 3 | RNVC: 2

10 Mar 1999

5340-14-542-1425
Lever Bracket

145421425
OF104144-1-00: RNCC: 3 | RNVC: 2
8040450P00: RNCC: 5 | RNVC: 2

8 Jul 2004

5340-14-372-5529
Leaf Spring

143725529
00-063225002-000-0000: RNCC: 3 | RNVC: 2
156547: RNCC: 5 | RNVC: 2
63225-002: RNCC: 5 | RNVC: 2
63225002: RNCC: 5 | RNVC: 2

1 Sep 1981

5340-14-523-4006
Angle Bracket

145234006
307-839-804-0: RNCC: 3 | RNVC: 2

17 Jan 2001

5340-14-512-6236
Mounting Bracket

145126236
620-157-794-0: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-463-5137
Plug Button

144635137
952-01-05-40: RNCC: 3 | RNVC: 2
952.01.05.40: RNCC: 5 | RNVC: 2

17 Jun 1993

5340-14-527-2589
Access Cover

145272589
B1-27127: RNCC: 3 | RNVC: 2

17 Oct 2001

5340-14-482-1369
Mounting Bracket

144821369
73-063-14-1: RNCC: 3 | RNVC: 2

20 Jun 1996

5340-14-425-1165
Rod End Clevis

144251165
13-201-20: RNCC: 3 | RNVC: 2

21 Jun 1988

5340-14-315-4837
Angle Bracket

143154837
620-841-004-0: RNCC: 3 | RNVC: 2
620-841-004-0: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-385-2010
Rod End Clevis

143852010
5082-03: RNCC: 3 | RNVC: 2
785506300: RNCC: 5 | RNVC: 2

26 Jul 1983

5340-14-426-4121
Loop Clamp

144264121
NO PRIMARY REF14-426-4121: RNCC: 3 | RNVC: 2
395404: RNCC: 5 | RNVC: 2
5.530.0580.1: RNCC: 5 | RNVC: 9

30 Aug 1988

5340-14-204-7744
Access Cover

142047744
100-55-004: RNCC: 3 | RNVC: 2
0100550040: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-14-299-1326
Loop Clamp

142991326
121S77-120-00-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-353-6797
Loop Clamp

143536797
650-403-205-0: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-353-6775
Loop Clamp

143536775
501-804-554-0: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-286-1375
Mending Plate

142861375
A10-90-054-03-0: RNCC: 3 | RNVC: 2
A10-90-054-03-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-548-3530
Metal Grille

145483530
332P61-1011-03: RNCC: 3 | RNVC: 2

10 Jan 2006

5340-14-505-8890
Synchro Clamp

145058890
285778: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-471-9737
Access Cover

144719737
H43148: RNCC: 3 | RNVC: 2
91654034: RNCC: 5 | RNVC: 2
H43148: RNCC: 5 | RNVC: 9

28 Sep 1994

5340-14-397-9238
Anchor Strap

143979238
0811171800: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-209-8370
Access Cover

142098370
61775: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-523-2602
Pipe Hanger

145232602
RA1M703836251: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-226-2411
Retaining Strap

142262411
0076930: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-542-3019
Mounting Plate

145423019
970646108: RNCC: 3 | RNVC: 2
970646108: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-539-7453
Cushioning Pad

145397453
21034079-00: RNCC: 3 | RNVC: 2
21034079-2: RNCC: 5 | RNVC: 2

5 Feb 2004

5340-14-209-9247
Retaining Strap

142099247
200892: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-315-3780
Access Cover

143153780
103994: RNCC: 3 | RNVC: 2
103994: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-434-5767
Anchor Strap

144345767
558203: RNCC: 3 | RNVC: 2

22 Sep 1989

5340-14-349-3772
Rod End Clevis

143493772
C46781: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-555-6608
Access Cover

145556608
0174120250: RNCC: 3 | RNVC: 2

5 Dec 2007

5340-14-508-5420
Handle Grip

145085420
47135392: RNCC: 3 | RNVC: 2

16 Sep 1998

5340-14-266-0931
Access Hole Frame

142660931
40320B2: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-322-0300
Access Hole Frame

143220300
0000452189: RNCC: 3 | RNVC: 2
0000452189: RNCC: 5 | RNVC: 9
452189: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-480-3186
Access Cover

144803186
2022107: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-542-0173
Utility Access Door

145420173
20047-300: RNCC: 3 | RNVC: 2
502118009001A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-504-6244
Locking Stay

145046244
MARCH94249C00: RNCC: 3 | RNVC: 2
MARCH94249B00: RNCC: 5 | RNVC: 9
MARCH94249X00: RNCC: 5 | RNVC: 9

25 Feb 1998

5340-14-312-3999
Butt Hinge

143123999
16274560: RNCC: 3 | RNVC: 2
16274560: RNCC: 5 | RNVC: 2
16274560: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-320-6160
Rod End Clevis

143206160
182349: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-548-8386
Plug Button

145488386
0298731030: RNCC: 3 | RNVC: 2

16 Feb 2006

5340-14-340-2804
Retaining Strap

143402804
206251: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-489-3051
Access Cover

144893051
10149568: RNCC: 3 | RNVC: 2

9 Jul 1997

5340-14-211-0724
Rod End Clevis

142110724
15245: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-341-7889
Access Cover

143417889
202056: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-396-3403
Access Cover

143963403
N107085: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-411-4221
Wiring Harness

144114221
A11A704111350: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-387-9490
Mounting Plate

143879490
365A33-6141-20: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-357-3735
Leaf Spring

143573735
0165-103-500: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-383-0622
Detent Plunger

143830622
16816: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-458-6899
Access Cover

144586899
1776A900-02: RNCC: 3 | RNVC: 2
91690886: RNCC: 5 | RNVC: 2

29 Oct 1992

5340-14-261-2066
Rod End Connector

142612066
175-42-142: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-368-2256
Quick Release Pin

143682256
208-11071-00: RNCC: 3 | RNVC: 2

20 Feb 1981

5340-14-275-0793
Rod End Clevis

142750793
SA13-1-01-11-000: RNCC: 3 | RNVC: 2
SA131-01-11-000: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-469-1049
Mounting Bracket

144691049
305-327-205-0: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-14-449-4036
Mounting Plate

144494036
212292-0: RNCC: 3 | RNVC: 2
1314-2C: RNCC: 5 | RNVC: 2
85-694-4301: RNCC: 6 | RNVC: 9

7 Aug 1991

5340-14-459-4589
Mounting Bracket

144594589
3274-9132811-00: RNCC: 3 | RNVC: 2
3274-9132811-00: RNCC: 5 | RNVC: 9

1 Dec 1992

5340-14-312-0059
Retaining Strap

143120059
TH20J2199-21: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-356-0384
Loop Clamp

143560384
E1101-31: RNCC: 3 | RNVC: 2
85-688-5287: RNCC: 6 | RNVC: 9

5 Apr 1979

5340-14-541-5249
Mounting Bracket

145415249
1091558-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-549-5166
Detent Plunger

145495166
ST1-601-201-22: RNCC: 3 | RNVC: 2

12 Apr 2006

5340-14-571-2491
Utility Resilient Mount

145712491
MP14-235: RNCC: 3 | RNVC: 2

6 Mar 2012

5340-14-382-8660
Mounting Bracket

143828660
0294408320: RNCC: 3 | RNVC: 2
302-266-403-0: RNCC: 5 | RNVC: 2

17 Feb 1983

5340-14-506-7129
Angle Bracket

145067129
TB30-48090-105: RNCC: 3 | RNVC: 2

11 May 1998

5340-14-428-1254
Mounting Bracket

144281254
3511 190 55361: RNCC: 3 | RNVC: 2
89288177: RNCC: 5 | RNVC: 2
3511-190-55361: RNCC: 5 | RNVC: 2

1 Dec 1988

5340-14-386-3202
Control Rod

143863202
0010068337A350: RNCC: 3 | RNVC: 2
1-350-68: RNCC: 3 | RNVC: 9
1-350-68A: RNCC: 5 | RNVC: 9

24 Aug 1983

5340-14-294-7120
Support Hook

142947120
AACE4MP74011111: RNCC: 3 | RNVC: 2
AACE4MP74-01-111-1: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-440-7988
Access Cover

144407988
4-039-0080: RNCC: 3 | RNVC: 2

25 Jul 1990

5340-14-459-6673
Arched Cushion

144596673
MAT169-0012F19DE41,5: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-14-316-5160
T Plate

143165160
321A21-9749-00: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-437-6585
Retaining Strap

144376585
PM1A167130410: RNCC: 3 | RNVC: 2
PM1A167130410: RNCC: 5 | RNVC: 2

7 Feb 1990

5340-14-417-4073
Angle Bracket

144174073
254087P03: RNCC: 3 | RNVC: 2
254087P03: RNCC: 5 | RNVC: 9

8 Jul 1987

5340-14-397-0107
Angle Bracket

143970107
23080390-4: RNCC: 3 | RNVC: 2
23080390: RNCC: 5 | RNVC: 2

27 Nov 1984

5340-14-555-5573
Mounting Bracket

145555573
RA1M291710128: RNCC: 3 | RNVC: 2

27 Nov 2007

5340-14-228-1249
Mending Plate

142281249
0000467174: RNCC: 3 | RNVC: 2
0000467174: RNCC: 5 | RNVC: 9
467174: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-554-3252
Mounting Bracket

145543252
82115883000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-520-5209
Mounting Bracket

145205209
45593414: RNCC: 3 | RNVC: 2
45593414: RNCC: 5 | RNVC: 9

19 May 2000

5340-14-224-0227
Handwheel

142240227
GSM137-001F19DET7SANSB0ULEAS10G: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-510-0084
Rim Lock Set

145100084
NO PRIMARY REF14-510-0084: RNCC: 3 | RNVC: 2
ST7268: RNCC: 5 | RNVC: 9
5340AA1135464: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-292-8847
Rod End Clevis

142928847
92198: RNCC: 3 | RNVC: 2
85-603-8441: RNCC: 6 | RNVC: 9

1 Jan 1972

5340-14-222-7943
Webbing Strap

142227943
LFP54-413: RNCC: 3 | RNVC: 2
LFP54-413: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-386-1493
Butt Hinge

143861493
365A25-3074-04: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-378-0466
Anchor Strap

143780466
NO PRIMARY REF14-378-0466: RNCC: 3 | RNVC: 2
53431410: RNCC: 5 | RNVC: 9

20 Jul 1982

5340-14-442-7797
Arched Cushion

144427797
BA30089050-17: RNCC: 2 | RNVC: 2

5 Nov 1990

5340-14-489-9267
Loop Clamp

144899267
650-402-622-0: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-14-343-2411
Angle Bracket

143432411
0294208050: RNCC: 3 | RNVC: 2
302-289-902U: RNCC: 5 | RNVC: 2

16 Jun 1977

5340-14-387-1677
Loop Clamp

143871677
501-804-694-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-553-4549
Mounting Bracket

145534549
CCN301-510-450A1: RNCC: 3 | RNVC: 2

4 Apr 2007

5340-14-508-3553
Mounting Plate

145083553
7515910-02: RNCC: 3 | RNVC: 2

9 Sep 1998

5340-14-534-0977
Bumper

145340977
332A22-1376-10: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-482-9302
Pipe Hanger

144829302
78732-040-050: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-524-3892
Cover Strip

145243892
365A25-0028-1601: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-14-299-0647
Mounting Bracket

142990647
321A60-9924-20: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-436-2576
Buckle

144362576
386-100-11A: RNCC: 3 | RNVC: 2

12 Dec 1989

5340-14-329-5450
Flush Catch Claw

143295450
T20-13B108: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-361-2522
Bridge Clamp

143612522
K10306-16: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-416-5766
Access Cover

144165766
0224910170: RNCC: 3 | RNVC: 2
85-693-2396: RNCC: 6 | RNVC: 9

18 Jun 1987

5340-14-495-4838
Access Cover

144954838
Z13253-74: RNCC: 3 | RNVC: 2
F300 0T 019 3347: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-322-1542
Mending Plate

143221542
07-20-01-018: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-459-3789
Section Block Clamp

144593789
16787440: RNCC: 3 | RNVC: 2
16787440: RNCC: 5 | RNVC: 9

26 Nov 1992

5340-14-551-5314
Cover Strip

145515314
SZ16.251.233: RNCC: 3 | RNVC: 2

28 Sep 2006

5340-14-489-9715
Mounting Plate

144899715
25659392: RNCC: 3 | RNVC: 2
2-565939-2: RNCC: 5 | RNVC: 2

3 Sep 1997

5340-14-356-4548
Tubular Fairlead

143564548
A11A231474305: RNCC: 3 | RNVC: 2

25 Apr 1979

5340-14-387-5472
Rod End Clevis

143875472
137687: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-14-549-2985
Mounting Bracket

145492985
10656380001: RNCC: 3 | RNVC: 2

21 Mar 2006

5340-14-453-5613
Plug Button

144535613
624014: RNCC: 3 | RNVC: 2

26 Feb 1992

5340-14-210-5975
Rod End Clevis

142105975
0000351529: RNCC: 3 | RNVC: 2
0000351529: RNCC: 5 | RNVC: 9
351529: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-367-3983
Mounting Plate

143673983
15175473: RNCC: 3 | RNVC: 2
15175473: RNCC: 5 | RNVC: 2
15175473: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-335-3554
Access Cover

143353554
197472: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-542-7607
Utility Access Door

145427607
56697225: RNCC: 3 | RNVC: 2

13 Aug 2004

5340-14-483-4750
Access Cover

144834750
47134167: RNCC: 3 | RNVC: 2

12 Sep 1996

5340-14-481-6333
Access Cover

144816333
1096414A01: RNCC: 3 | RNVC: 2

23 May 1996

5340-14-480-3751
Anchor Strap

144803751
34 97 28: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-310-6936
Access Cover

143106936
12201794: RNCC: 3 | RNVC: 2
12201794: RNCC: 3 | RNVC: 9

1 Jan 1974

5340-14-522-1104
Access Cover

145221104
3188582: RNCC: 3 | RNVC: 2
3188582: RNCC: 5 | RNVC: 2

4 Oct 2000

5340-14-247-1783
Rod End Clevis

142471783
0000126806: RNCC: 3 | RNVC: 2
126806: RNCC: 5 | RNVC: 9
0000126806: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-356-2193
Vent Plug

143562193
70120039: RNCC: 3 | RNVC: 2
70120039: RNCC: 5 | RNVC: 9
AB120039: RNCC: 5 | RNVC: 9

25 Apr 1979

5340-14-472-6763
Access Cover

144726763
0308107020: RNCC: 3 | RNVC: 2
89277429: RNCC: 5 | RNVC: 2

9 Nov 1994

5340-14-417-9919
Detent Plunger

144179919
059766A01TRA: RNCC: 3 | RNVC: 2
059766A: RNCC: 5 | RNVC: 2

6 Aug 1987

5340-14-459-7307
Cover Strip

144597307
LN321022REP13JAG3: RNCC: 3 | RNVC: 2
RAB0175: RNCC: 5 | RNVC: 2

15 Dec 1992

5340-14-413-1676
Butt Hinge

144131676
412702040205: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-14-354-0551
Angle Bracket

143540551
A11A224101033: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-263-5250
Loop Clamp

142635250
R403218: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-333-3417
Retaining Strap

143333417
52390: RNCC: 3 | RNVC: 9

2 Jul 1975

5340-14-496-5738
Mounting Plate

144965738
5010114692: RNCC: 3 | RNVC: 2
F300 0T 021 7276: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-374-5930
Retaining Strap

143745930
0035651141: RNCC: 3 | RNVC: 2
0035651141: RNCC: 5 | RNVC: 9
35651141: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-525-5812
Bumper

145255812
10 146 021 1020: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-532-1357
Mounting Plate

145321357
5010559918: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-14-525-8284
Loop Clamp

145258284
P109349K: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-422-2858
Mounting Plate

144222858
824287: RNCC: 3 | RNVC: 2
824287: RNCC: 5 | RNVC: 9

24 Feb 1988

5340-14-506-2942
Angle Bracket

145062942
38223578: RNCC: 3 | RNVC: 2
38223578: RNCC: 5 | RNVC: 9

22 Apr 1998

5340-14-303-8358
Rod End Clevis

143038358
615-412-058DET20: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-390-4998
Quick Release Pin

143904998
NO PRIMARY REF14-390-4998: RNCC: 3 | RNVC: 2
BIR01CE06-40: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-14-553-8639
Utility Access Door

145538639
5400-0500: RNCC: 3 | RNVC: 2
5400-05: RNCC: 5 | RNVC: 2

25 May 2007

5340-14-311-1379
Mounting Bracket

143111379
253-5M662P43: RNCC: 3 | RNVC: 9
PA253-5M662P43: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-412-1981
Bumper

144121981
332A27-0022-50: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-241-1716
Mounting Bracket

142411716
ST104M4-1-11P18: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-508-5991
Flush Catch Claw

145085991
321A79-0056-20: RNCC: 3 | RNVC: 2

21 Sep 1998

5340-14-351-7454
Snap Hook

143517454
4250-11-3: RNCC: 3 | RNVC: 2

12 Sep 1978

5340-14-217-9173
Mounting Bracket

142179173
3160S25-28-286: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-370-8703
Pipe Hanger

143708703
303-933-603-0: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-389-5048
Retaining Strap

143895048
365A69-2019-00: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-524-8951
Mounting Plate

145248951
350A32-3931-00: RNCC: 3 | RNVC: 2

25 Apr 2001

5340-14-349-7494
Retaining Strap

143497494
053M22-551070R: RNCC: 3 | RNVC: 2
16688284: RNCC: 5 | RNVC: 2
053M22-551070R: RNCC: 5 | RNVC: 2
0551070R00: RNCC: 5 | RNVC: 2
16688284: RNCC: 5 | RNVC: 2

14 Jun 1978

5340-14-387-9479
Mounting Plate

143879479
365A33-2013-01: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-14-386-8413
Webbing Strap

143868413
682-33-47-18M0-4M: RNCC: 3 | RNVC: 2
85-692-4342: RNCC: 6 | RNVC: 9

24 Aug 1983

5340-14-396-2636
Bumper

143962636
NO PRIMARY REF14-396-2636: RNCC: 3 | RNVC: 2
P4H015097-00: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-280-1234
Bridge Clamp

142801234
3511 960 27401: RNCC: 3 | RNVC: 2
3511-960-27401: RNCC: 5 | RNVC: 2
MQ02740: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-464-0919
Access Cover

144640919
365A23-4302-0901: RNCC: 3 | RNVC: 2

15 Jul 1993

5340-14-520-4442
Mounting Plate

145204442
M45AA0101-750: RNCC: 3 | RNVC: 2
M45AA0101-750: RNCC: 5 | RNVC: 9

17 May 2000

5340-14-464-9417
Threaded Rod End

144649417
9970-147-055: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-260-0771
Mounting Bracket

142600771
321A65-1051-2051: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-471-1206
Mounting Bracket

144711206
40-6-4A5-22: RNCC: 3 | RNVC: 2
89165609: RNCC: 5 | RNVC: 2
40-6-4A5-22: RNCC: 5 | RNVC: 9

27 Jul 1994

5340-14-341-0470
Runner

143410470
5423-12: RNCC: 3 | RNVC: 2
2-013601B: RNCC: 5 | RNVC: 2

16 Mar 1977

5340-14-524-8250
Mounting Bracket

145248250
J05190-00-1000P004: RNCC: 3 | RNVC: 2

18 Apr 2001

5340-14-264-1705
Loop Clamp

142641705
55217-225ADL: RNCC: 3 | RNVC: 2
55217-225-000ADL: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-230-7327
Handwheel

142307327
GSM137-001F17-11N1: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-464-9569
Cover Strip

144649569
365A25-0036-27: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-350-1561
Angle Bracket

143501561
319A73-37-222: RNCC: 3 | RNVC: 2
85-800-6354: RNCC: 6 | RNVC: 9

14 Jun 1978

5340-14-428-5808
Bumper

144285808
4615B0A000-0002: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-563-2302
Utility Resilient Mount

145632302
17000300: RNCC: 3 | RNVC: 2
MP17-615: RNCC: 5 | RNVC: 2

15 Jan 2010

5340-14-507-0343
Snap Hook

145070343
300587-0RED: RNCC: 3 | RNVC: 2

3 Jun 1998

5340-14-473-6473
Webbing Strap

144736473
332A22-1444-0001: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-255-4963
Door Handle

142554963
321A75-6024-00: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-283-9771
Access Cover

142839771
FH206-700-02: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-204-1687
Loop Clamp

142041687
3130-73-54-255: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-388-5830
Loop Clamp

143885830
415809-100: RNCC: 3 | RNVC: 2
415809-100: RNCC: 5 | RNVC: 2
415809-100: RNCC: 5 | RNVC: 9

3 Nov 1983

5340-14-519-5083
Mounting Bracket

145195083
456-01384-000: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-224-7739
Loop Clamp

142247739
3160S73-44-233: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-369-2783
Synchro Clamp

143692783
S2235-1DG: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-489-6499
Mounting Bracket

144896499
332A21-1394-27: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-435-1125
Retaining Strap

144351125
M427-403260: RNCC: 3 | RNVC: 2

18 Oct 1989

5340-14-405-4507
Loop Clamp

144054507
514119190065: RNCC: 3 | RNVC: 2
38PT6: RNCC: 5 | RNVC: 2
85-693-1691: RNCC: 6 | RNVC: 9

27 Nov 1985

5340-14-467-3680
Furniture Leg Tip

144673680
4102794: RNCC: 3 | RNVC: 2
SP-313A: RNCC: 6 | RNVC: 9

10 Jan 1994

5340-14-204-1084
Loop Clamp

142041084
3130S73-83-060: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-356-0349
Angle Bracket

143560349
E4M632-39-01: RNCC: 3 | RNVC: 2
85-800-7068: RNCC: 6 | RNVC: 9

5 Apr 1979

5340-14-524-6218
Mounting Bracket

145246218
15A2733: RNCC: 3 | RNVC: 2

29 Mar 2001

5340-14-554-0428
Clamping Catch

145540428
91-512-52: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-14-366-2808
Angle Bracket

143662808
A11A221160023: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-14-549-3607
Blank Panel

145493607
16038: RNCC: 3 | RNVC: 2

27 Mar 2006

5340-14-460-8482
Mounting Plate

144608482
39705C: RNCC: 3 | RNVC: 2

10 Feb 1993

5340-14-451-0189
Loop Clamp

144510189
10-690021: RNCC: 3 | RNVC: 2

28 Oct 1991

5340-14-547-9263
Mounting Plate

145479263
562202: RNCC: 3 | RNVC: 2

25 Nov 2005

5340-14-552-7801
Mounting Plate

145527801
S212A2021204: RNCC: 3 | RNVC: 2

31 Jan 2007

5340-14-459-1962
Mounting Bracket

144591962
101A103672A: RNCC: 3 | RNVC: 2

19 Nov 1992

5340-14-357-1453
Pipe Hanger

143571453
A11A231472061: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-485-1363
Blank Panel

144851363
3BT01395AAAA: RNCC: 3 | RNVC: 2
3BT01395AAAA: RNCC: 5 | RNVC: 9

10 Jan 1997

5340-14-555-2215
Mounting Bracket

145552215
82354024000: RNCC: 3 | RNVC: 2

10 Oct 2007

5340-14-544-0568
Mounting Bracket

145440568
5010604314: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-14-518-4672
Synchro Clamp

145184672
T716A2005301: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-551-2922
Angle Bracket

145512922
RA1M705626220A1: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-512-8694
Loop Clamp

145128694
477531: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-435-1527
Strap Hinge

144351527
4159025: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-14-380-4724
Mounting Plate

143804724
2206-386A503: RNCC: 3 | RNVC: 2

29 Nov 1982

5340-14-518-0523
Butt Hinge

145180523
7518983: RNCC: 3 | RNVC: 2
5000296631: RNCC: 3 | RNVC: 2

25 Jan 2000

5340-14-433-2664
Mounting Bracket

144332664
5172361900: RNCC: 3 | RNVC: 2
723619: RNCC: 5 | RNVC: 9

18 Jul 1989

5340-14-391-4601
Webbing Strap

143914601
M4ZS731D1029: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-528-5363
Mounting Bracket

145285363
45710824: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-457-3200
Bow Handle

144573200
3003CH: RNCC: 3 | RNVC: 2

27 Aug 1992

5340-14-454-1055
Blank Panel

144541055
16662038: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-14-457-6596
Webbing Strap

144576596
A1500-CAT5-LG3M: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-505-7754
Bumper

145057754
30000267: RNCC: 3 | RNVC: 9

26 Mar 1998

5340-14-548-6279
Angle Bracket

145486279
RA1M702856161N1: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-444-6975
Synchro Clamp

144446975
TOP7B1517: RNCC: 3 | RNVC: 2

16 Jan 1991

5340-14-459-3777
Section Block Clamp

144593777
16787421: RNCC: 3 | RNVC: 2
16787421: RNCC: 5 | RNVC: 9

26 Nov 1992

5340-14-459-2166
Cover Strip

144592166
PM1A129120108: RNCC: 3 | RNVC: 2
PM1A129120108: RNCC: 5 | RNVC: 2

19 Nov 1992

5340-14-433-4288
Loop Clamp

144334288
0849024M00: RNCC: 3 | RNVC: 2

25 Jul 1989

5340-14-366-4610
Angle Bracket

143664610
BBZ2291: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-505-6565
Mounting Bracket

145056565
C25001086000: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-425-8778
Angle Bracket

144258778
A7277: RNCC: 3 | RNVC: 2

27 Jul 1988

5340-14-284-5466
Angle Bracket

142845466
0249927290: RNCC: 3 | RNVC: 2

1 Jan 1972

Load More Results