What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 9 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 9 of 39

5340-33-003-4180
Access Cover

330034180
11.28951-2630-SE: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-001-3342
Angle Bracket

330013342
92012704: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-107-9246
Mounting Bracket

331079246
9644.250.2040: RNCC: 3 | RNVC: 2
2510008620: RNCC: 5 | RNVC: 2

26 Sep 2000

5340-33-156-4564
Pipe Hanger

331564564
-97635-G2511: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-6196
Access Cover

330046196
231888: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-206-4593
Mounting Bracket

332064593
H081 1066: RNCC: 3 | RNVC: 2

22 Jan 2008

5340-33-107-4116
Mounting Plate

331074116
440127: RNCC: 3 | RNVC: 2

15 Oct 1999

5340-33-004-5567
Mounting Bracket

330045567
NN53232P03: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-33-108-2723
Lock-Release Lever

331082723
9644.251.0475: RNCC: 3 | RNVC: 2
2510901102: RNCC: 5 | RNVC: 2
2510901102: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-106-8643
Expansion Plug

331068643
583223: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-154-0456
Expansion Plug

331540456
807916: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-003-4481
Access Cover

330034481
721023516: RNCC: 3 | RNVC: 2

16 Sep 1997

5340-33-157-0210
Access Cover

331570210
-74810-Y9500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-158-7589
Shimmy Damper

331587589
171-513: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-205-0626
Mounting Plate

332050626
0402121: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-33-154-2243
Mending Plate

331542243
744860: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-157-7106
Blank Panel

331577106
311648: RNCC: 3 | RNVC: 2
311648: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-0262
Butt Hinge

331540262
815113: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-211-2212
Butt Hinge Leaf

332112212
35-A0209-0402: RNCC: 3 | RNVC: 2

10 Jul 2013

5340-33-206-2981
Bumper

332062981
70843 FA205: RNCC: 3 | RNVC: 2
70843-FA205: RNCC: 5 | RNVC: 2

30 Oct 2007

5340-33-116-8153
Ball Socket Seat

331168153
M27-21: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-188-9845
Compression Cup

331889845
3 170 293: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-1859
Mounting Bracket

331071859
330315E1: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-000-0624
Angle Bracket

330000624
6.302.0982.007.5: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-211-6062
Mounting Bracket

332116062
0918289000200: RNCC: 3 | RNVC: 2

7 Dec 2013

5340-33-204-4270
Mounting Bracket

332044270
W280698401510: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-157-8263
Angle Bracket

331578263
744997: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-209-2773
Mounting Plate

332092773
0840983000100: RNCC: 3 | RNVC: 2

21 Sep 2011

5340-33-189-2225
Mechanical Stop

331892225
0160020: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-189-2286
Mounting Bracket

331892286
0310060: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-004-4337
Access Cover

330044337
1005-004570: RNCC: 3 | RNVC: 2
3882201133: RNCC: 3 | RNVC: 2

26 Mar 1999

5340-33-003-2464
Mounting Plate

330032464
221023715: RNCC: 3 | RNVC: 2

13 Feb 1997

5340-33-211-2983
Mounting Bracket

332112983
5061376: RNCC: 3 | RNVC: 2
1.164.02.080: RNCC: 5 | RNVC: 2

13 Aug 2013

5340-33-200-4025
Mounting Bracket

332004025
DF 405 257 A: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-156-5004
Loop Clamp

331565004
-24220-N3300: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-7483
Access Cover

331577483
534890: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-8601
Mounting Bracket

331168601
2106/34: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-3133
Self-Locking Insert

331563133
-01658-00551: RNCC: 3 | RNVC: 2

12 Jun 1995

5340-33-002-6936
Handwheel

330026936
80-V-160-17: RNCC: 3 | RNVC: 2

26 Jul 1995

5340-33-203-8327
Engine Plate

332038327
DEJ12MDPETALS: RNCC: 3 | RNVC: 2

19 Nov 2004

5340-33-200-2627
Utility Access Door

332002627
100302131000: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-33-187-5538
Loop Clamp

331875538
0201411-3: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-3721
Bow Handle

332043721
980362: RNCC: 3 | RNVC: 2

29 Jul 2005

5340-33-004-8400
Loop Clamp

330048400
NRN50052G10: RNCC: 3 | RNVC: 2

13 Dec 1999

5340-33-205-4927
Stand Base

332054927
WW 422 895 AE: RNCC: 3 | RNVC: 2

20 Nov 2006

5340-33-002-0561
Mounting Bracket

330020561
C-20030-5/1-I-06-18: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-33-156-3286
Pipe Hanger

331563286
-73278-01C00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-2473
Mounting Bracket

332052473
CBD56501P64: RNCC: 3 | RNVC: 2

30 Jun 2006

5340-33-155-7487
Mending Plate

331557487
315262: RNCC: 3 | RNVC: 2
315262: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-107-2884
Mounting Plate

331072884
994104: RNCC: 3 | RNVC: 2

24 Sep 1999

5340-33-108-2699
Mounting Bracket

331082699
9644.251.1490: RNCC: 3 | RNVC: 2
2510900878: RNCC: 5 | RNVC: 2
2510900878: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-154-2254
Mending Plate

331542254
783572: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-204-9579
Handle Grip

332049579
57110-12D11: RNCC: 3 | RNVC: 2

28 Feb 2006

5340-33-116-3881
Mounting Bracket

331163881
GP-2047260: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-6206
Elbow Catch

330016206
TL-802-2: RNCC: 3 | RNVC: 2

15 Nov 1989

5340-33-205-4606
Mounting Plate

332054606
1025901936: RNCC: 3 | RNVC: 2
9743.100.0119: RNCC: 5 | RNVC: 2

19 Oct 2006

5340-33-155-7473
Mending Plate

331557473
512727: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-161-2578
Mounting Bracket

331612578
311937: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-33-108-5822
Loop Clamp

331085822
5975000967: RNCC: 3 | RNVC: 2

23 Apr 2001

5340-33-106-4404
Swivel Caster

331064404
3791: RNCC: 3 | RNVC: 2

29 Jan 1998

5340-33-155-7765
Angle Bracket

331557765
317956: RNCC: 3 | RNVC: 2
317956: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-155-6391
Loop Clamp

331556391
756953: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-161-4283
Access Cover

331614283
191981: RNCC: 3 | RNVC: 2

31 Jul 1995

5340-33-001-1118
Mounting Bracket

330011118
35-47110-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-1761
Mounting Bracket

330011761
35-62179-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-115-9263
Retaining Strap

331159263
DSH-336: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-6700
Retaining Strap

330006700
683186: RNCC: 1 | RNVC: 2

7 Sep 1988

5340-33-203-2102
Bridge Clamp

332032102
2540901604: RNCC: 3 | RNVC: 2
2540901604: RNCC: 5 | RNVC: 2

16 Feb 2004

5340-33-003-2937
Retaining Strap

330032937
721023650: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-201-5262
Cushioning Pad

332015262
1005006029: RNCC: 3 | RNVC: 2

22 Aug 2002

5340-33-203-0858
Mounting Bracket

332030858
IT00100120: RNCC: 3 | RNVC: 2

28 Jan 2004

5340-33-004-8951
Block Clamp

330048951
NN60172P01: RNCC: 3 | RNVC: 2

28 Jan 2000

5340-33-000-6953
Loop Clamp

330006953
570208: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-000-6698
Retaining Strap

330006698
648585: RNCC: 1 | RNVC: 2

7 Sep 1988

5340-33-202-7076
Mounting Bracket

332027076
9673.250.5362: RNCC: 3 | RNVC: 2
2540900761: RNCC: 5 | RNVC: 2
2540900761: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-204-8511
Handwheel

332048511
EP.63640-RFV: RNCC: 3 | RNVC: 2

15 Feb 2006

5340-33-203-7040
Access Cover

332037040
191086438: RNCC: 3 | RNVC: 2
191086438: RNCC: 5 | RNVC: 2

9 Sep 2004

5340-33-116-8332
Mounting Bracket

331168332
528: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-004-1918
Stand Base

330041918
730092001: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-157-7962
Angle Bracket

331577962
646880: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-33-156-2364
Angle Bracket

331562364
-20624-G2800: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-187-9318
Access Cover

331879318
-228286: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-154-6510
Loop Clamp

331546510
3090221049: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-155-7769
Angle Bracket

331557769
555811: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-200-0580
Angle Bracket

332000580
631069: RNCC: 3 | RNVC: 2

1 Oct 2001

5340-33-004-2017
Mounting Bracket

330042017
616661: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-116-8090
Rod End Clevis

331168090
00.00329/01: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-0416
Mending Plate

330000416
H350GS/D008: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-157-0158
Access Cover

331570158
-50810-G9500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-4986
Angle Bracket

332034986
NN60885P01: RNCC: 3 | RNVC: 2

30 Apr 2004

5340-33-004-2012
Mounting Bracket

330042012
792508: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-004-4274
Access Cover

330044274
-68250-Y9502: RNCC: 3 | RNVC: 2

25 Mar 1999

5340-33-203-9536
Blank Panel

332039536
055-14.01.01.M01: RNCC: 3 | RNVC: 2

27 Jan 2005

5340-33-116-6262
Access Cover

331166262
102.011.002: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-8191
Access Cover

331578191
737514: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-4816
Rim Lock

332034816
TESA 2240203 AF: RNCC: 3 | RNVC: 2

23 Apr 2004

5340-33-106-2898
Mending Plate

331062898
303817K1: RNCC: 3 | RNVC: 2

4 Sep 1997

5340-33-107-6467
Mounting Plate

331076467
7356.252.0877: RNCC: 3 | RNVC: 2
2510700816: RNCC: 5 | RNVC: 2

17 Apr 2000

5340-33-201-7163
Loop Clamp

332017163
1025-901535: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-33-106-6774
Door Handle

331066774
-80606-07C00: RNCC: 3 | RNVC: 2

28 Dec 1998

5340-33-202-7703
Mounting Bracket

332027703
INS0470/0080: RNCC: 3 | RNVC: 2

20 Oct 2003

5340-33-003-7144
Mounting Plate

330037144
4111931013: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-33-116-4499
Loop Clamp

331164499
11203000250: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-108-5492
Strap Fastener Loop

331085492
9644.250.8810: RNCC: 3 | RNVC: 2
2540001214: RNCC: 5 | RNVC: 2
2540001214: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-189-1850
Mounting Bracket

331891850
02100000: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-202-3549
Shimmy Damper

332023549
GR3D011411: RNCC: 3 | RNVC: 2

21 Apr 2003

5340-33-188-8320
Doorknob

331888320
6102041: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-33-108-2257
Access Cover

331082257
9644.101.0570: RNCC: 3 | RNVC: 2
1005006571: RNCC: 5 | RNVC: 2
1005006571: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-107-9290
Mounting Bracket

331079290
7057.252.0260: RNCC: 3 | RNVC: 2
2510700181: RNCC: 5 | RNVC: 2

26 Sep 2000

5340-33-115-6073
Plain Solid Disk

331156073
92277500662: RNCC: 3 | RNVC: 2

27 Apr 1995

5340-33-206-1411
Stand Base

332061411
SILM190100: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-33-115-9743
Access Cover

331159743
9.987.1.796.002.6: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-8436
Blank Panel

331578436
753450: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-9951
Mounting Bracket

332039951
999005960: RNCC: 3 | RNVC: 2
999005960: RNCC: 5 | RNVC: 2

31 Jan 2005

5340-33-160-3810
Retaining Strap

331603810
79.03.083.044: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-6308
Mounting Plate

330036308
35368: RNCC: 3 | RNVC: 2

25 May 1998

5340-33-106-3247
Self-Locking Insert

331063247
631 262 00 18: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-180-6558
Access Cover

331806558
200021: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-180-6188
Loop Clamp

331806188
189469: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-106-4644
Rod End Clevis

331064644
4730001081: RNCC: 3 | RNVC: 2

6 Mar 1998

5340-33-201-9889
Mounting Bracket

332019889
1025-900780: RNCC: 3 | RNVC: 2

9 Dec 2002

5340-33-201-5272
Mounting Plate

332015272
9644.101.0151: RNCC: 3 | RNVC: 2
1005006625: RNCC: 5 | RNVC: 2
1005006625: RNCC: 5 | RNVC: 2

22 Aug 2002

5340-33-001-5000
Retaining Strap

330015000
92027663: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-203-6104
Retaining Band

332036104
PCAMI/RP/1200005460013: RNCC: 3 | RNVC: 2

12 Jun 2004

5340-33-206-2363
Angle Bracket

332062363
AGB114998B20: RNCC: 3 | RNVC: 2

8 Oct 2007

5340-33-205-2416
Stand Base

332052416
CBD56501G11: RNCC: 3 | RNVC: 2

29 Jun 2006

5340-33-204-1840
Mounting Plate

332041840
2540901577: RNCC: 3 | RNVC: 2
2540901577: RNCC: 5 | RNVC: 2

27 Apr 2005

5340-33-000-7512
Angle Bracket

330007512
690835: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-004-7069
Angle Bracket

330047069
NN60086: RNCC: 1 | RNVC: 2
NN60086P01: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-33-157-8074
Access Cover

331578074
712582: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-7745
Angle Bracket

331557745
316915: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-155-7471
Mending Plate

331557471
312761: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-108-0204
Mounting Plate

331080204
9644.251.8210: RNCC: 3 | RNVC: 2
2540900238: RNCC: 5 | RNVC: 2
2540900238: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-000-7009
Loop Clamp

330007009
805271: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-205-0114
Runner

332050114
19624216: RNCC: 3 | RNVC: 2

30 Mar 2006

5340-33-201-8203
Mending Plate

332018203
2540001459: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-108-0336
Lock Key

331080336
7356.252.2360: RNCC: 3 | RNVC: 2
2510010234: RNCC: 5 | RNVC: 2

4 Dec 2000

5340-33-106-8883
Mounting Bracket

331068883
191347: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-201-7168
Access Cover

332017168
1025-900181: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-33-003-4263
Access Hole Frame

330034263
159-865: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-001-2773
Loop Clamp

330012773
CAN67282F12M: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-002-0110
Padlock

330020110
65 L: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-33-205-7376
Strap Hinge

332057376
38CR: RNCC: 3 | RNVC: 2

6 Mar 2007

5340-33-200-4580
Access Cover

332004580
WW 487 452: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-33-204-3989
Turnbuckle

332043989
40-3/4-GANCHO-CANCAMO: RNCC: 3 | RNVC: 2
BS-33P024604: RNCC: 5 | RNVC: 2
4030-33-P02-4604: RNCC: 6 | RNVC: 9

8 Sep 2005

5340-33-103-5314
Access Cover

331035314
9505-3-1-08: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-001-2285
Clamping Catch

330012285
35-81995-0702: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-154-0560
Mending Plate

331540560
801830: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-102-4004
Snap Hook

331024004
MB51-8-7: RNCC: 3 | RNVC: 2
MB51-8-7: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-8154
Angle Bracket

331578154
735891: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-9162
Expansion Shield

330019162
C-20050-7-0-I-05-9: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-201-1581
Strap Hinge

332011581
35-22615-2803A01: RNCC: 3 | RNVC: 2

17 May 2002

5340-33-107-1326
Retaining Strap

331071326
61060280202: RNCC: 3 | RNVC: 2
PCAMI/RP/0306028022: RNCC: 6 | RNVC: 9

30 Jun 1999

5340-33-103-2226
Mounting Plate

331032226
1055-000010: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-0045
Mounting Bracket

330010045
35-32343-0102: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-208-0519
Utility Resilient Mount

332080519
GCRS51010B: RNCC: 3 | RNVC: 2

29 Jan 2010

5340-33-201-4782
Access Cover

332014782
J57462515-002: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-001-6850
Turnbuckle

330016850
35-46400-0401-00: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-200-9857
Access Cover

332009857
2510900099: RNCC: 3 | RNVC: 2
2510900099: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-108-1837
Mounting Plate

331081837
7054.292.0013: RNCC: 3 | RNVC: 2
2930700047: RNCC: 5 | RNVC: 2

29 Jan 2001

5340-33-200-9404
Handle Grip

332009404
46 690 922 01: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-33-205-4112
Mounting Bracket

332054112
W290620371000: RNCC: 3 | RNVC: 2

15 Sep 2006

5340-33-201-0353
Plain Solid Disk

332010353
5310001070: RNCC: 3 | RNVC: 2
5310001070: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-157-8441
Angle Bracket

331578441
753647: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-7879
Angle Bracket

331577879
633015: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-5791
Access Door Hinge

331075791
M200000010: RNCC: 3 | RNVC: 2

27 Jan 2000

5340-33-181-5864
Mending Plate

331815864
-01201730: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-8036
Access Cover

330018036
35-22846-0002-01: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-001-1893
Mounting Bracket

330011893
35-65016-0101: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-206-1923
Mounting Bracket

332061923
PS-610798: RNCC: 3 | RNVC: 2

21 Sep 2007

5340-33-203-9489
Retaining Strap

332039489
20610086: RNCC: 3 | RNVC: 2
33R288300: RNCC: 5 | RNVC: 1

27 Jan 2005

5340-33-211-2170
Angle Bracket

332112170
TP252666: RNCC: 3 | RNVC: 2

9 Jul 2013

5340-33-000-0626
Angle Bracket

330000626
6.305.0.969.006.5: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-002-9705
Retaining Clip

330029705
6318330170: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-201-0007
Mounting Bracket

332010007
2510901501: RNCC: 3 | RNVC: 2
2510901501: RNCC: 5 | RNVC: 2

22 Apr 2002

5340-33-116-8093
Threaded Rod End

331168093
00.00551/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-9822
Mounting Plate

332029822
723551735-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-205-0568
Mounting Bracket

332050568
0405710: RNCC: 3 | RNVC: 2

19 Apr 2006

5340-33-200-8548
Mounting Bracket

332008548
9644.251.5201: RNCC: 3 | RNVC: 2
2530000985: RNCC: 5 | RNVC: 2
2530000985: RNCC: 5 | RNVC: 2

5 Apr 2002

5340-33-000-2470
Rod End Clevis

330002470
311689: RNCC: 1 | RNVC: 2
5340001025: RNCC: 3 | RNVC: 2
311689: RNCC: 3 | RNVC: 2

22 May 1987

5340-33-157-7589
Access Cover

331577589
553316: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-4170
Mechanical Stop

332044170
W280698402015: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-116-8599
Mounting Bracket

331168599
2106/12-2: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-4072
Angle Bracket

332014072
A2810566-401: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-000-6951
Loop Clamp

330006951
564594: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-000-7494
Angle Bracket

330007494
645115: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-108-4698
Cushioning Pad

331084698
9644.250.6165: RNCC: 3 | RNVC: 2
5340001659: RNCC: 5 | RNVC: 2
5340001659: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-211-1843
Mounting Bracket

332111843
VR08010200: RNCC: 3 | RNVC: 2
VR08010200: RNCC: 3 | RNVC: 2

6 Jul 2013

5340-33-204-4178
Bow Handle

332044178
W280698401025: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-107-6308
Angle Bracket

331076308
7060.252.0012: RNCC: 3 | RNVC: 2
2510700781: RNCC: 5 | RNVC: 2

18 May 2000

5340-33-156-4611
Bail Handle

331564611
-99605-G9600: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-8592
Mounting Plate

332038592
CBD50515P05: RNCC: 3 | RNVC: 2

11 Dec 2004

5340-33-154-9948
Bumper

331549948
06 07 121 100: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-154-6938
Angle Bracket

331546938
750752: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-202-5640
Threaded Rod End

332025640
95-21365-4001: RNCC: 3 | RNVC: 2

19 Aug 2003

5340-33-002-1805
Loop Clamp

330021805
620812-3: RNCC: 3 | RNVC: 2
4730-001128: RNCC: 5 | RNVC: 2

13 Jul 1993

5340-33-157-9468
Mending Plate

331579468
753146: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-2968
Support Hook

332112968
SP08754: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-33-116-7576
Access Cover

331167576
190349: RNCC: 3 | RNVC: 2
190349: RNCC: 3 | RNVC: 2
4043207: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-0181
Lock-Release Lever

331080181
9644.251.7010: RNCC: 3 | RNVC: 2
2540001447: RNCC: 5 | RNVC: 2
2540001447: RNCC: 5 | RNVC: 2

24 Nov 2000

5340-33-005-3710
Metal Grille

330053710
TIPO 920: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-33-203-1894
Mounting Bracket

332031894
9673.120.0046: RNCC: 3 | RNVC: 2
2590900038: RNCC: 5 | RNVC: 2
2590900038: RNCC: 5 | RNVC: 2

12 Feb 2004

5340-33-203-5595
Furniture Leg Tip

332035595
34432160: RNCC: 3 | RNVC: 2

25 May 2004

5340-33-204-4226
Access Cover

332044226
W280698407503: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-116-0536
Access Cover

331160536
13421000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-9415
Butt Hinge

332039415
PS-902060: RNCC: 3 | RNVC: 2

25 Jan 2005

5340-33-001-6498
Access Cover

330016498
35-24062-0003: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-161-2534
Mounting Bracket

331612534
1055-000706: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-33-001-1561
Mounting Bracket

330011561
35-56242-0006: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-181-8127
Retaining Strap

331818127
-09100724-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-157-7324
Bow Handle

331577324
320852: RNCC: 3 | RNVC: 2
320852: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-200-4258
Stand Base

332004258
MGE150: RNCC: 3 | RNVC: 2

23 Jan 2002

5340-33-200-9901
Access Cover

332009901
2510901159: RNCC: 3 | RNVC: 2
2510901159: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-154-6464
Angle Bracket

331546464
500006479: RNCC: 3 | RNVC: 2
731893: RNCC: 5 | RNVC: 9

3 Dec 1990

5340-33-106-9670
Access Cover

331069670
600194: RNCC: 3 | RNVC: 2

18 May 1999

5340-33-200-0637
Loop Clamp

332000637
D0942510686: RNCC: 3 | RNVC: 2

1 Oct 2001

5340-33-108-5806
Bumper

331085806
2 ZLA 38-249: RNCC: 3 | RNVC: 2

27 Oct 1998

5340-33-154-0461
Expansion Plug

331540461
811468: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-106-8321
Mounting Bracket

331068321
W280675512100: RNCC: 3 | RNVC: 2

5 Apr 1999

5340-33-102-2740
Strapping Seal

331022740
1005-001718: RNCC: 3 | RNVC: 2

1 Mar 1991

5340-33-116-0331
Mending Plate

331160331
BA-11281100: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-2157
Strap Hinge

331072157
PCAMI/RP/0400000550: RNCC: 3 | RNVC: 2

8 Jul 1999

5340-33-190-5486
Access Cover

331905486
K43188152-001: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-7397
Angle Bracket

332007397
27681015: RNCC: 3 | RNVC: 2

6 Mar 2002

5340-33-161-2960
Mechanical Stop

331612960
207292: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-154-6941
Angle Bracket

331546941
751763: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-154-3825
Access Cover

331543825
139291: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-204-4142
Mounting Bracket

332044142
W280698403501: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-154-0278
Butt Hinge

331540278
820765: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-108-6074
Access Cover

331086074
797444: RNCC: 3 | RNVC: 2

30 Apr 2001

5340-33-204-6832
Mounting Plate

332046832
PS-510015: RNCC: 3 | RNVC: 2

5 Dec 2005

5340-33-001-9948
Mending Plate

330019948
35-22782-0103: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-002-0890
Webbing Strap

330020890
500005240: RNCC: 3 | RNVC: 2
315319: RNCC: 3 | RNVC: 2
15100662: RNCC: 5 | RNVC: 9
315319: RNCC: 5 | RNVC: 9

30 Oct 1992

5340-33-108-4366
Mounting Bracket

331084366
9644.591.5860: RNCC: 3 | RNVC: 2
2510900857: RNCC: 5 | RNVC: 2
2510900857: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-201-9945
Rim Latch

332019945
312026: RNCC: 3 | RNVC: 2

9 Dec 2002

5340-33-002-0914
Access Cover

330020914
318111: RNCC: 3 | RNVC: 2

31 Oct 1992

5340-33-004-1891
Mounting Bracket

330041891
730092104: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-145-6364
Access Cover

331456364
024392: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-9516
Access Cover

332039516
20880760: RNCC: 3 | RNVC: 2
33R288310: RNCC: 5 | RNVC: 1

27 Jan 2005

5340-33-154-5556
Retaining Strap

331545556
801547: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-107-7718
Retaining Strap

331077718
-018056: RNCC: 3 | RNVC: 2

18 May 2000

5340-33-000-0514
Access Cover

330000514
H350GS/D027: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-161-7017
Padlock

331617017
401/40: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-108-5323
Mounting Bracket

331085323
9644.590.0020: RNCC: 3 | RNVC: 2
2510007384: RNCC: 5 | RNVC: 2
2510007384: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-001-5552
Angle Bracket

330015552
92041244: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-000-7058
Retaining Band

330007058
553933: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-001-4810
Access Cover

330014810
92027118: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-004-4846
Retaining Clip

330044846
183258: RNCC: 3 | RNVC: 2

2 Jun 1999

5340-33-000-4240
Expansion Plug

330004240
3340905011: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-154-6513
Loop Clamp

331546513
3090231011: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-108-4942
Flush Catch

331084942
99.08.108: RNCC: 3 | RNVC: 2

26 Mar 2001

5340-33-108-5422
Lock Bolt

331085422
9644.251.6439: RNCC: 3 | RNVC: 2
2510901151: RNCC: 5 | RNVC: 2
2510901151: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-211-4954
Bow Handle

332114954
0208681: RNCC: 3 | RNVC: 2

22 Nov 2013

5340-33-160-5821
Mechanical Stop

331605821
95.550.504: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-105-2600
Mounting Bracket

331052600
108.016AA: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-204-1410
Angle Bracket

332041410
M2.00018: RNCC: 3 | RNVC: 2

11 Apr 2005

5340-33-205-2173
Angle Bracket

332052173
CBD50542P24: RNCC: 3 | RNVC: 2

23 Jun 2006

5340-33-200-1189
Mounting Bracket

332001189
7059.252.0470: RNCC: 3 | RNVC: 2
2510700744: RNCC: 5 | RNVC: 2

8 Oct 2001

5340-33-200-0907
Access Cover

332000907
WG 409 563: RNCC: 3 | RNVC: 2

5 Oct 2001

5340-33-115-8173
Access Cover

331158173
92290217472: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-001-3829
Compression Cup

330013829
92020203: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-157-0241
Access Cover

331570241
-76832-G2531: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-1953
Access Cover

332061953
CBD58505P25: RNCC: 3 | RNVC: 2

21 Sep 2007

5340-33-201-4614
Angle Bracket

332014614
J28265141-001: RNCC: 3 | RNVC: 2

26 Jul 2002

5340-33-001-0519
Mounting Bracket

330010519
35-46198-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-161-2549
Mounting Bracket

331612549
2510-003674: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-33-205-5520
Angle Bracket

332055520
95-25904-1302: RNCC: 3 | RNVC: 2

15 Dec 2006

5340-33-201-5669
Access Cover

332015669
126107: RNCC: 3 | RNVC: 2

4 Sep 2002

5340-33-154-5539
Retaining Strap

331545539
5340001088: RNCC: 3 | RNVC: 2
592611: RNCC: 3 | RNVC: 2
592611: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-200-5133
Mounting Bracket

332005133
19567030: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-107-9306
Retaining Strap

331079306
7057.252.0033: RNCC: 3 | RNVC: 2
2510700298: RNCC: 5 | RNVC: 2

26 Sep 2000

5340-33-108-4221
Access Cover

331084221
0639.250.4101: RNCC: 3 | RNVC: 2
2510006378: RNCC: 5 | RNVC: 2
2510006378: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-003-4478
Access Cover

330034478
721010520: RNCC: 3 | RNVC: 2

16 Sep 1997

5340-33-005-3101
Utility Resilient Mount

330053101
VRM3,15-08: RNCC: 3 | RNVC: 2

10 May 2001

5340-33-201-4095
Angle Bracket

332014095
A2810572-001: RNCC: 3 | RNVC: 2

9 Jul 2002

5340-33-002-0092
Mortise Lock Set

330020092
C.P.4.: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-33-108-7417
Mounting Plate

331087417
W280698110004: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-33-106-9682
Access Cover

331069682
682524: RNCC: 3 | RNVC: 2

18 May 1999

5340-33-102-2523
Access Cover

331022523
09234 EISA 43103: RNCC: 3 | RNVC: 2

1 Mar 1991

5340-33-206-0405
Angle Bracket

332060405
NN60966P01: RNCC: 3 | RNVC: 2

10 Jul 2007

5340-33-200-5048
Access Cover

332005048
19523201: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-180-7428
Locking Stay

331807428
338636: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-108-0537
Access Cover

331080537
9644.281.5150: RNCC: 3 | RNVC: 2
2990000452: RNCC: 5 | RNVC: 2
2990000452: RNCC: 5 | RNVC: 2

11 Dec 2000

5340-33-108-5469
Mechanical Stop

331085469
0639.250.4800: RNCC: 3 | RNVC: 2
2540000760: RNCC: 5 | RNVC: 2
2540000760: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-001-5602
Retaining Strap

330015602
92041330: RNCC: 3 | RNVC: 2

15 Nov 1989

5340-33-203-2096
Cushioning Pad

332032096
2590900148: RNCC: 3 | RNVC: 2
2590900148: RNCC: 5 | RNVC: 2

16 Feb 2004

5340-33-108-6121
Retaining Bail

331086121
0000944055: RNCC: 3 | RNVC: 2

30 Apr 2001

5340-33-201-7178
Mounting Plate

332017178
1025-901333: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-33-003-2934
Buckle

330032934
721023561: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-203-6873
Utility Access Door

332036873
2123010260: RNCC: 3 | RNVC: 2

24 Aug 2004

5340-33-003-3238
Angle Bracket

330033238
221023720: RNCC: 3 | RNVC: 2

28 May 1997

5340-33-201-7176
Mounting Bracket

332017176
1025-901083: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-33-116-8641
Compression Cup

331168641
2106/18: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3392
Mounting Bracket

330013392
92014623: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-202-6664
Mounting Plate

332026664
9673.250.0468: RNCC: 3 | RNVC: 2
2510903190: RNCC: 5 | RNVC: 2
2510903190: RNCC: 5 | RNVC: 2

24 Sep 2003

5340-33-004-7113
Loop Clamp

330047113
NRN50052G06: RNCC: 3 | RNVC: 2

10 Sep 1999

5340-33-004-4807
Retaining Strap

330044807
193737: RNCC: 3 | RNVC: 2

2 Jun 1999

5340-33-160-6326
Mounting Bracket

331606326
95.585.426: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-5678
Loop Clamp

331605678
91.521.973: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-6011
Angle Bracket

332026011
757837: RNCC: 3 | RNVC: 2

3 Sep 2003

5340-33-106-8862
Angle Bracket

331068862
7356.292.0980: RNCC: 3 | RNVC: 2
2510700308: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-200-6051
Access Cover

332006051
D510A.06: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-201-8161
Angle Bracket

332018161
319791: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-001-9995
Mounting Bracket

330019995
35-51225-0001: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-204-1649
Mending Plate

332041649
2540901562: RNCC: 3 | RNVC: 2

19 Apr 2005

5340-33-188-8914
Access Cover

331888914
632507870044: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3269
Bumper

330013269
92012106: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-003-0622
Handle Grip

330030622
5010178221: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-106-8646
Retaining Strap

331068646
7356.252.0585: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-202-7119
Access Cover

332027119
9673.250.7950: RNCC: 3 | RNVC: 2
2540901191: RNCC: 5 | RNVC: 2
2540901191: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-157-8478
Angle Bracket

331578478
755129: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-0968
Mortise Latch

332060968
T130511: RNCC: 3 | RNVC: 2
07HMIR084: RNCC: 5 | RNVC: 2

6 Aug 2007

5340-33-200-9023
Mounting Bracket

332009023
3465700072: RNCC: 3 | RNVC: 2

11 Apr 2002

5340-33-211-6070
Mounting Bracket

332116070
0918289000800: RNCC: 3 | RNVC: 2

7 Dec 2013

5340-33-155-9164
Mounting Bracket

331559164
312487: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-107-6462
Stand Base

331076462
7356.252.0873: RNCC: 3 | RNVC: 2
2510700811: RNCC: 5 | RNVC: 2

17 Apr 2000

5340-33-001-3321
Compression Cup

330013321
92012609: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-201-6176
Angle Bracket

332016176
9644.251.0042: RNCC: 3 | RNVC: 2
2510009360: RNCC: 5 | RNVC: 2
2510009360: RNCC: 5 | RNVC: 2

16 Sep 2002

5340-33-001-1340
Mounting Bracket

330011340
35-53174-0002: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-116-0934
Shimmy Damper

331160934
BD-11222000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-2890
Thumb Latch

332032890
9673.250.5280: RNCC: 3 | RNVC: 2
2510900562: RNCC: 5 | RNVC: 2
2510900562: RNCC: 5 | RNVC: 2

23 Feb 2004

5340-33-204-6469
Clamping Catch

332046469
720123538: RNCC: 3 | RNVC: 2

21 Nov 2005

5340-33-188-9135
Access Cover

331889135
4200290: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-33-201-8195
Utility Access Door

332018195
2540000571: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-160-5680
Loop Clamp

331605680
79.03.083.234: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-188-8260
Access Door Hinge

331888260
6102038: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-155-7482
Mending Plate

331557482
521107: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-189-1664
Handwheel

331891664
6123015: RNCC: 3 | RNVC: 2

25 Sep 1995

5340-33-200-9884
Retaining Strap

332009884
2510900336: RNCC: 3 | RNVC: 2
2510900336: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-210-8348
Rod End Clevis

332108348
M361A1412002: RNCC: 3 | RNVC: 2

5 Mar 2013

5340-33-203-7107
Angle Bracket

332037107
NN60814G01: RNCC: 3 | RNVC: 2

9 Sep 2004

5340-33-107-9535
Mounting Bracket

331079535
SP08933: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-33-156-5021
Loop Clamp

331565021
-20651-Y9501: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-180-7672
Mounting Bracket

331807672
517502: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-106-7951
Detent Plunger

331067951
RAL-200-9-15-3: RNCC: 3 | RNVC: 2

31 Mar 1999

5340-33-200-6910
Sliding Block

332006910
17520061: RNCC: 3 | RNVC: 2

25 Feb 2002

5340-33-203-9138
Block Clamp

332039138
RAP648X: RNCC: 3 | RNVC: 2
4730002523: RNCC: 5 | RNVC: 2

11 Jan 2005

5340-33-108-4437
Cushioning Pad

331084437
9644.250.6046: RNCC: 3 | RNVC: 2
2540001057: RNCC: 5 | RNVC: 2
2540001057: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-004-8745
Loop Clamp

330048745
NN60234P01: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-33-187-2995
Loop Clamp

331872995
510471: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-7030
Padlock

331617030
301/40: RNCC: 3 | RNVC: 2
F12102020: RNCC: 5 | RNVC: 2

26 Apr 1995

5340-33-000-0226
Detent Plunger

330000226
1005000036: RNCC: 1 | RNVC: 2
1005-000036: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-190-1116
Extension Handle

331901116
2265: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-003-7152
Pipe Hanger

330037152
649145: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-33-106-5785
Angle Bracket

331065785
1395799: RNCC: 3 | RNVC: 2
1395799: RNCC: 5 | RNVC: 2

31 Mar 1999

5340-33-003-4472
Webbing Strap

330034472
221023580: RNCC: 3 | RNVC: 2

16 Sep 1997

5340-33-105-5586
Turnbuckle

331055586
74650113: RNCC: 3 | RNVC: 2
746501: RNCC: 5 | RNVC: 9

9 May 1996

5340-33-116-6390
Loop Clamp

331166390
40X50: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3607
Mounting Bracket

330013607
92018233: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-106-0807
Lock Key

331060807
26.519: RNCC: 3 | RNVC: 2

20 Feb 1997

5340-33-103-2136
Bumper

331032136
9265.60.022032: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-8376
Blank Panel

331578376
751288: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-154-6921
Angle Bracket

331546921
312431: RNCC: 3 | RNVC: 2
312431: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-001-4519
Retaining Strap

330014519
92026451: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-108-0197
Mounting Plate

331080197
9644.251.8010: RNCC: 3 | RNVC: 2
2540900116: RNCC: 5 | RNVC: 2
2540900116: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-000-7040
Loop Clamp

330007040
3090217049: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-155-8970
Angle Bracket

331558970
313046: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-115-8773
Mounting Bracket

331158773
10770: RNCC: 3 | RNVC: 2

25 Jul 1995

5340-33-116-5076
Angle Bracket

331165076
5660563: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-1472
Mounting Bracket

332111472
VR07201010: RNCC: 3 | RNVC: 2
VR07201010: RNCC: 3 | RNVC: 2

20 Jun 2013

5340-33-005-3708
Metal Grille

330053708
TIPO 310: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-33-203-2761
Access Cover

332032761
9673.250.5170: RNCC: 3 | RNVC: 2
2510900392: RNCC: 5 | RNVC: 2
2510900392: RNCC: 5 | RNVC: 2

19 Feb 2004

5340-33-003-7233
Leather Strap

330037233
0048-091: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-33-004-7128
Loop Clamp

330047128
NRN50052G22: RNCC: 3 | RNVC: 2

10 Sep 1999

5340-33-003-3410
Mounting Bracket

330033410
302042: RNCC: 3 | RNVC: 2

24 Jun 1997

5340-33-201-9944
Mounting Bracket

332019944
317096: RNCC: 3 | RNVC: 2

9 Dec 2002

5340-33-202-6232
Mounting Bracket

332026232
9673.250.1460: RNCC: 3 | RNVC: 2
1005900375: RNCC: 5 | RNVC: 2
1005900375: RNCC: 5 | RNVC: 2

16 Sep 2003

5340-33-189-2280
Mounting Bracket

331892280
01220081: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-126-4731
Access Cover

331264731
2690.43: RNCC: 3 | RNVC: 2

3 Nov 1992

5340-33-202-0970
Mounting Bracket

332020970
49P40772 02 01: RNCC: 3 | RNVC: 2

10 Jan 2003

5340-33-158-8640
Access Cover

331588640
-01201422-4: RNCC: 3 | RNVC: 2
-01201422-6: RNCC: 5 | RNVC: 2
-01201422-3: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-004-7065
Angle Bracket

330047065
NN50353: RNCC: 1 | RNVC: 2
NN50353P01: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-33-204-4539
Cushioning Pad

332044539
720124515: RNCC: 3 | RNVC: 2

15 Sep 2005

5340-33-102-2124
Rim Lock

331022124
150: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-201-6953
Mounting Bracket

332016953
320505: RNCC: 3 | RNVC: 2

3 Oct 2002

5340-33-116-0642
Loop Clamp

331160642
AA-18275020: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-2667
Slide Keeper

331072667
FT 6: RNCC: 3 | RNVC: 2
PCAMI/RP/43E0000FT6: RNCC: 6 | RNVC: 9

21 Sep 1999

5340-33-202-7811
Lock-Release Lever

332027811
2540-901182: RNCC: 3 | RNVC: 2

28 Oct 2003

5340-33-202-3046
Access Door Hinge

332023046
27482005: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-33-004-2859
Angle Bracket

330042859
NN60113P01: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-206-0863
Access Cover

332060863
RAL-200-6-8-1: RNCC: 3 | RNVC: 2

31 Jul 2007

5340-33-203-5613
Utility Access Door

332035613
80020102: RNCC: 3 | RNVC: 2

25 May 2004

5340-33-108-2223
Mending Plate

331082223
9644.101.0031: RNCC: 3 | RNVC: 2
1005006351: RNCC: 5 | RNVC: 2
1005006351: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-211-5023
Angle Bracket

332115023
J29165230-402: RNCC: 3 | RNVC: 2

22 Nov 2013

5340-33-001-0721
Mounting Bracket

330010721
35-46354-0401: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-000-9638
Angle Bracket

330009638
35-11659-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-114-4748
Threaded Rod End

331144748
DIN 71802: RNCC: 2 | RNVC: 2

8 Nov 1990

5340-33-107-9968
Mounting Bracket

331079968
9644.250.0881: RNCC: 3 | RNVC: 2
1005006099: RNCC: 5 | RNVC: 2
1005006099: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-001-3495
Access Cover

330013495
92016013: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-204-0812
Webbing Strap

332040812
02512456: RNCC: 3 | RNVC: 2

10 Mar 2005

5340-33-107-3715
Stand Base

331073715
631 680 02 14: RNCC: 3 | RNVC: 2

4 Oct 1999

5340-33-107-3063
Mounting Plate

331073063
21124677000: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-002-9774
Retaining Clip

330029774
1409903: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-108-4431
Retaining Strap

331084431
9644.250.8020: RNCC: 3 | RNVC: 2
2540001042: RNCC: 5 | RNVC: 2
2540001042: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-108-4159
Access Cover

331084159
9644.810.0230: RNCC: 3 | RNVC: 2
1005004469: RNCC: 5 | RNVC: 2
1005004469: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-205-3948
Loop Clamp

332053948
2038235: RNCC: 3 | RNVC: 2

13 Sep 2006

5340-33-126-1325
Access Cover

331261325
2691-20: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-33-103-0820
Leather Strap

331030820
1005-001896: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-4444
Access Door Hinge

330014444
92026330: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-103-1745
Retaining Strap

331031745
1005-004398: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-9032
Mounting Plate

332049032
63312-13E00: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-201-7179
Mounting Bracket

332017179
1025-901558: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-33-126-4216
Mending Plate

331264216
C22234-N1000-C80: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-001-0947
Mounting Bracket

330010947
35-46644-0004: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-126-4217
Angle Bracket

331264217
C22234-N1000-C98: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-157-7171
Access Cover

331577171
315037: RNCC: 3 | RNVC: 2
315037: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-4811
Access Cover

330014811
92027119: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-161-5088
Mending Plate

331615088
160006: RNCC: 3 | RNVC: 2

7 Mar 1994

5340-33-200-8876
Mounting Plate

332008876
W290698422500: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-33-000-6927
Loop Clamp

330006927
513009: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-108-4197
Mounting Bracket

331084197
9644.250.2030: RNCC: 3 | RNVC: 2
1005006128: RNCC: 5 | RNVC: 2
1005006128: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-200-2202
Mounting Bracket

332002202
28141101: RNCC: 3 | RNVC: 2

6 Nov 2001

5340-33-103-1576
Mounting Bracket

331031576
1005-004281: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-115-6081
Plain Solid Disk

331156081
92273520042: RNCC: 3 | RNVC: 2

27 Apr 1995

5340-33-157-7136
Angle Bracket

331577136
313081: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-114-4003
Mounting Bracket

331144003
WW 305274: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-003-3236
Loop Clamp

330033236
221023220: RNCC: 3 | RNVC: 2

28 May 1997

5340-33-203-8926
Mounting Bracket

332038926
2510011225: RNCC: 3 | RNVC: 2
7356.252.0778: RNCC: 5 | RNVC: 2

23 Dec 2004

5340-33-003-3003
Loop Clamp

330033003
10-53800-0501: RNCC: 3 | RNVC: 2

14 Apr 1997

5340-33-106-0641
Retaining Strap

331060641
1055700011: RNCC: 3 | RNVC: 2
33-1797-004100.00.0: RNCC: 3 | RNVC: 2

28 Dec 1996

5340-33-000-0455
Angle Bracket

330000455
H350GS/D100: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-204-9740
Mounting Plate

332049740
0224973: RNCC: 3 | RNVC: 2

6 Mar 2006

5340-33-108-6558
Retaining Band

331086558
112901.119: RNCC: 3 | RNVC: 2
112901.119: RNCC: 5 | RNVC: 2

30 Apr 2001

5340-33-200-8623
Corner Brace

332008623
7562.252.0213: RNCC: 3 | RNVC: 2

5 Apr 2002

5340-33-160-3191
Metal Grille

331603191
116511095: RNCC: 3 | RNVC: 9

11 Jul 1995

5340-33-116-2491
Mounting Plate

331162491
104.157.11: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-4298
Mending Plate

331604298
79.10.029.865: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-0084
Access Cover

332110084
27421004: RNCC: 3 | RNVC: 2

10 May 2013

5340-33-108-2571
Lock-Release Lever

331082571
9644.251.0252: RNCC: 3 | RNVC: 2
2510009861: RNCC: 5 | RNVC: 2
2510009861: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-157-8006
Angle Bracket

331578006
690059: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-108-2666
Mounting Bracket

331082666
9644.121.0120: RNCC: 3 | RNVC: 2
2510011014: RNCC: 5 | RNVC: 2
2510011014: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-204-0550
Utility Access Door

332040550
GE12010400: RNCC: 3 | RNVC: 2

22 Feb 2005

5340-33-003-2248
Mounting Plate

330032248
721010504: RNCC: 3 | RNVC: 2

27 Jan 1997

5340-33-160-4512
Access Cover

331604512
75.513.485: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-2630
Mending Plate

331032630
1908931037: RNCC: 3 | RNVC: 2

4 Mar 1994

5340-33-200-1068
Angle Bracket

332001068
7063.252.0250: RNCC: 3 | RNVC: 2
2510701194: RNCC: 5 | RNVC: 2

8 Oct 2001

5340-33-108-2585
Mending Plate

331082585
9644.251.0470: RNCC: 3 | RNVC: 2
2510009952: RNCC: 5 | RNVC: 2
2510009952: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-001-3928
Retaining Strap

330013928
92020344: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-204-3626
Loop Clamp

332043626
-01556-2202M: RNCC: 3 | RNVC: 2
4910RAZ009182: RNCC: 6 | RNVC: 9

27 Jul 2005

5340-33-108-4177
Mounting Bracket

331084177
9644.250.1620: RNCC: 3 | RNVC: 2
1005005954: RNCC: 5 | RNVC: 2
1005005954: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-200-2482
Clamping Catch

332002482
22414303: RNCC: 3 | RNVC: 2

19 Nov 2001

5340-33-107-5696
Ball Socket Seat

331075696
M000000107: RNCC: 3 | RNVC: 2

27 Jan 2000

5340-33-204-1400
Mounting Bracket

332041400
064.06.01.09: RNCC: 3 | RNVC: 2

8 Apr 2005

5340-33-114-3992
Rod End Clevis

331143992
WW 405777: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-201-5837
Bumper

332015837
M18059: RNCC: 3 | RNVC: 2

5 Sep 2002

5340-33-116-1363
Retaining Strap

331161363
BJ-17199080: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-7376
Mounting Plate

331077376
W280686700101: RNCC: 3 | RNVC: 2

25 May 2000

5340-33-166-0434
Access Cover

331660434
BW-914: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-107-7823
Mounting Plate

331077823
ER-6106-BN: RNCC: 3 | RNVC: 2

18 May 2000

5340-33-001-1490
Mounting Bracket

330011490
35-56140-0201: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-000-9822
Mounting Bracket

330009822
35-22012-0601: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-203-7026
Mounting Bracket

332037026
999095995: RNCC: 3 | RNVC: 2
999095995: RNCC: 5 | RNVC: 2

9 Sep 2004

5340-33-114-5069
Detent Plunger

331145069
5TG 2-125: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-106-8113
Mounting Bracket

331068113
REM-200-19-1: RNCC: 3 | RNVC: 2

31 Mar 1999

5340-33-204-2871
Filler Opening Cap

332042871
M.A.S. 841-13.18-26: RNCC: 3 | RNVC: 2

9 Jun 2005

5340-33-206-1220
Retaining Strap

332061220
403470: RNCC: 3 | RNVC: 2
403470: RNCC: 5 | RNVC: 2
5340-33-R05-6820: RNCC: 6 | RNVC: 9

23 Aug 2007

5340-33-107-0850
Rim Lock

331070850
1540/15: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-115-8142
Access Cover

331158142
11203002920: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-155-7768
Angle Bracket

331557768
590462: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-200-8558
Mounting Bracket

332008558
9644.251.6460: RNCC: 3 | RNVC: 2
2530001026: RNCC: 5 | RNVC: 2
2530001026: RNCC: 5 | RNVC: 2

5 Apr 2002

5340-33-102-3838
Mounting Bracket

331023838
MD51-4-14: RNCC: 3 | RNVC: 2
MD51-4-14: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-8960
Mounting Plate

331078960
MTU0117-001-02: RNCC: 3 | RNVC: 2

13 Sep 2000

5340-33-200-0413
Rod End Clevis

332000413
35-23317-0013: RNCC: 3 | RNVC: 2

27 Sep 2001

5340-33-001-4194
Expansion Plug

330014194
92023208-01: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-103-1577
Mounting Bracket

331031577
1005-004301: RNCC: 3 | RNVC: 2
1746: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-103-0714
Leather Strap

331030714
MD-C-7-100-210: RNCC: 3 | RNVC: 2
MD-C-7-100-210: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-0650
Loop Clamp

331160650
BA-13157000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-8853
Mounting Bracket

332018853
323063: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-33-202-5313
Access Cover

332025313
MHC2130400: RNCC: 3 | RNVC: 2
MHC1130400: RNCC: 5 | RNVC: 2

4 Aug 2003

5340-33-001-6413
Bridge Clamp

330016413
D57271-00: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-205-8559
Mounting Bracket

332058559
1000732-002: RNCC: 3 | RNVC: 2

20 Apr 2007

5340-33-107-2177
Leather Strap

331072177
PCAMI/RP/0400000930: RNCC: 3 | RNVC: 2

8 Jul 1999

5340-33-201-4102
Angle Bracket

332014102
A2811731-403: RNCC: 3 | RNVC: 2

9 Jul 2002

5340-33-105-1279
Mounting Bracket

331051279
CMH95200-2/10: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-204-4478
Angle Bracket

332044478
PS-401107: RNCC: 3 | RNVC: 2

15 Sep 2005

5340-33-107-9025
Mounting Plate

331079025
1-KPB-000012: RNCC: 3 | RNVC: 2

13 Sep 2000

5340-33-201-3942
Mounting Bracket

332013942
A2810523-401: RNCC: 3 | RNVC: 2

5 Jul 2002

5340-33-156-4636
Hinged Hasp

331564636
-80570-01C01: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-7624
Mounting Bracket

330047624
BR-3120-1: RNCC: 3 | RNVC: 2
-14902247-0: RNCC: 5 | RNVC: 2

7 Oct 1999

5340-33-107-7421
Mounting Bracket

331077421
W290684007300: RNCC: 3 | RNVC: 2

25 May 2000

5340-33-000-0454
Angle Bracket

330000454
C15448/041: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-201-4612
Angle Bracket

332014612
J28265131-001: RNCC: 3 | RNVC: 2

26 Jul 2002

5340-33-204-8940
Mounting Bracket

332048940
43750-29F00: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-201-2198
Access Cover

332012198
A2810558-001: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-106-7943
Mounting Bracket

331067943
RE-25-2-2-1: RNCC: 3 | RNVC: 2

31 Mar 1999

5340-33-105-0024
Mounting Bracket

331050024
CMA90100-3/5: RNCC: 3 | RNVC: 2

12 Sep 1995

5340-33-205-6111
Mounting Plate

332056111
1025901968: RNCC: 3 | RNVC: 2
9743.100.0404: RNCC: 5 | RNVC: 2

16 Jan 2007

5340-33-203-1899
Mounting Bracket

332031899
9673.120.0055: RNCC: 3 | RNVC: 2
2590900043: RNCC: 5 | RNVC: 2
2590900043: RNCC: 5 | RNVC: 2

12 Feb 2004

5340-33-115-9708
Angle Bracket

331159708
101.282.00.00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-9232
Rod End Clevis

332029232
CBD57500P37: RNCC: 3 | RNVC: 2

1 Dec 2003

5340-33-157-8075
Access Cover

331578075
712633: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-7151
Access Cover

331577151
313923: RNCC: 3 | RNVC: 2
313923: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-102-0415
Rod End Clevis

331020415
2510-000100: RNCC: 3 | RNVC: 2
2510000100: RNCC: 5 | RNVC: 2
411.090.0444: RNCC: 5 | RNVC: 2

2 Jan 1995

5340-33-126-6047
Angle Bracket

331266047
C22280-A1000-C60: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-005-4059
Rod End Connector

330054059
35-21365-2801: RNCC: 3 | RNVC: 2

18 Jul 2001

5340-33-190-3946
Runner

331903946
1200-1000: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-114-5149
Detent Plunger

331145149
5 TG 4-118: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-107-0695
Access Cover

331070695
20217040-0: RNCC: 3 | RNVC: 2
6009-TP: RNCC: 6 | RNVC: 9
PCAMI/RP/0502170400: RNCC: 6 | RNVC: 9

30 Jun 1999

5340-33-206-1305
Mounting Plate

332061305
PCMASABMR071: RNCC: 3 | RNVC: 2

30 Aug 2007

5340-33-001-8054
Snap Hook

330018054
35-82248-0001: RNCC: 3 | RNVC: 2

1 Mar 1991

Load More Results