What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 7 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 7 of 39

5340-33-001-4196
Angle Bracket

330014196
92023211: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-145-6437
Loop Clamp

331456437
018099: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-5481
Lock Bolt

331085481
9644.250.7190: RNCC: 3 | RNVC: 2
2540000918: RNCC: 5 | RNVC: 2
2540000918: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-107-4631
Angle Bracket

331074631
7356.252.0829: RNCC: 3 | RNVC: 2
2590001235: RNCC: 5 | RNVC: 2

15 Nov 1999

5340-33-108-4730
Mounting Plate

331084730
9644.590.5070: RNCC: 3 | RNVC: 2
5975000911: RNCC: 5 | RNVC: 2
5975000911: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-192-3773
Retaining Strap

331923773
640.200: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-003-3883
Mechanical Stop

330033883
11.20374-2068: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-001-4720
Angle Bracket

330014720
92026737: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-203-1826
Webbing Strap

332031826
9673.250.5907: RNCC: 3 | RNVC: 2
2540901432: RNCC: 5 | RNVC: 2
2540901432: RNCC: 5 | RNVC: 2

11 Feb 2004

5340-33-001-3428
Compression Cup

330013428
92014662: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-001-3988
Expansion Plug

330013988
92021007: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-201-4100
Angle Bracket

332014100
A2811651-001: RNCC: 3 | RNVC: 2

9 Jul 2002

5340-33-001-5511
Access Cover

330015511
92040826: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-116-5111
Access Cover

331165111
3062901: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-5540
Retaining Clip

332015540
BFF1010: RNCC: 3 | RNVC: 2

2 Sep 2002

5340-33-201-8052
Mounting Bracket

332018052
320558: RNCC: 3 | RNVC: 2

25 Oct 2002

5340-33-116-0645
Loop Clamp

331160645
3311501203: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-145-5582
Mechanical Stop

331455582
02-341: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-7398
Angle Bracket

332007398
27681016: RNCC: 3 | RNVC: 2

6 Mar 2002

5340-33-154-5546
Retaining Strap

331545546
735987: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-200-5012
Turnbuckle

332005012
19516200: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-106-8187
Mending Plate

331068187
7356.252.0006: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-200-8362
Loop Clamp

332008362
145964: RNCC: 3 | RNVC: 2

22 Mar 2002

5340-33-108-2581
Mending Plate

331082581
9644.251.0208: RNCC: 3 | RNVC: 2
2510009948: RNCC: 5 | RNVC: 2
2510009948: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-206-2223
Webbing Strap

332062223
980598: RNCC: 3 | RNVC: 2

3 Oct 2007

5340-33-211-0270
Angle Bracket

332110270
TP251762: RNCC: 3 | RNVC: 2

5 Jun 2013

5340-33-104-7913
Retaining Strap

331047913
W290676903000: RNCC: 3 | RNVC: 2

26 Sep 1995

5340-33-001-3742
Retaining Strap

330013742
92019349: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-157-8528
Angle Bracket

331578528
780758: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-33-157-8493
Angle Bracket

331578493
763364: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-0316
Mounting Bracket

332030316
999101579: RNCC: 3 | RNVC: 2
999101579: RNCC: 5 | RNVC: 2

19 Jan 2004

5340-33-004-4228
Expansion Plug

330044228
DIN443-B45-MS63: RNCC: 3 | RNVC: 2

25 Mar 1999

5340-33-205-3175
Mounting Bracket

332053175
220173195: RNCC: 3 | RNVC: 2

25 Jul 2006

5340-33-200-8039
Mounting Bracket

332008039
1005.002691: RNCC: 3 | RNVC: 2

13 Mar 2002

5340-33-154-5513
Retaining Strap

331545513
318595: RNCC: 3 | RNVC: 2
318595: RNCC: 5 | RNVC: 9

1 Oct 1990

5340-33-155-7692
Angle Bracket

331557692
765338: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-154-6590
Retaining Band

331546590
630241: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-202-3547
Shimmy Damper

332023547
GR3D010711: RNCC: 3 | RNVC: 2

21 Apr 2003

5340-33-157-9016
Mending Plate

331579016
319031: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-5651
Loop Clamp

331165651
30701-883-000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-1041
Mounting Bracket

330011041
35-46724-0301: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-206-2980
Bumper

332062980
70842 FA205: RNCC: 3 | RNVC: 2
70842-FA205: RNCC: 5 | RNVC: 2

30 Oct 2007

5340-33-108-5317
Retaining Clip

331085317
9644.250.2780: RNCC: 3 | RNVC: 2
1005900075: RNCC: 5 | RNVC: 2
1005900075: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-001-0738
Mounting Bracket

330010738
35-46359-0007: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-161-7027
Padlock

331617027
301/20: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-205-3041
Access Cover

332053041
33543-33E01: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-33-203-1905
Detent Plunger

332031905
9673.120.0148: RNCC: 3 | RNVC: 2
2590900130: RNCC: 5 | RNVC: 2
2590900130: RNCC: 5 | RNVC: 2

12 Feb 2004

5340-33-000-6974
Loop Clamp

330006974
646112: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-211-2966
Mounting Bracket

332112966
SP08686: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-33-201-6419
Access Cover

332016419
1025-900986: RNCC: 3 | RNVC: 2

20 Sep 2002

5340-33-201-7157
Mending Plate

332017157
7055.252.0084: RNCC: 3 | RNVC: 2
2510701586: RNCC: 5 | RNVC: 2

11 Oct 2002

5340-33-102-0668
Retaining Strap

331020668
108-1: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-003-1942
Access Cover

330031942
TPLS-2736: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-33-155-7738
Angle Bracket

331557738
744845: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-003-0548
Door Handle

330030548
7702146175: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-000-6686
Retaining Strap

330006686
576682: RNCC: 1 | RNVC: 2

7 Sep 1988

5340-33-003-7142
Mounting Plate

330037142
4111931004: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-33-166-0446
Access Cover

331660446
6.393-462.0: RNCC: 3 | RNVC: 2
6.393-462.0-MEISA: RNCC: 5 | RNVC: 2

20 Jul 1995

5340-33-157-7911
Angle Bracket

331577911
639984: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-2355
Angle Bracket

331562355
-56135-G9500: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-154-5685
Mending Plate

331545685
751159: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-154-5558
Retaining Strap

331545558
818862: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-192-3768
Retaining Strap

331923768
240.50: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-5146
Retaining Strap

330015146
92029903: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-200-9402
Handle Grip

332009402
46 690 920 02: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-33-001-5246
Retaining Strap

330015246
92032010: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-160-7500
Retaining Clip

331607500
75.515.239: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-5272
Retaining Strap

330015272
92033007: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-200-9749
Detent Plunger

332009749
2510008334: RNCC: 3 | RNVC: 2
2510008334: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-204-1273
Mounting Bracket

332041273
M2.00009: RNCC: 3 | RNVC: 2

4 Apr 2005

5340-33-202-6483
Mounting Bracket

332026483
9673.120.0131: RNCC: 3 | RNVC: 2
2510900618: RNCC: 5 | RNVC: 2
2510900618: RNCC: 5 | RNVC: 2

22 Sep 2003

5340-33-205-9263
Mounting Bracket

332059263
1025900553: RNCC: 3 | RNVC: 2
9682.101.0345: RNCC: 5 | RNVC: 2

18 May 2007

5340-33-002-8134
Door Handle

330028134
0004474299: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-155-7699
Angle Bracket

331557699
698363: RNCC: 3 | RNVC: 2
698363.90: RNCC: 5 | RNVC: 2

18 Oct 1990

5340-33-116-3597
Bow Handle

331163597
9245.031: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-105-2802
Locking Stay

331052802
-04200328-0: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-202-3166
Angle Bracket

332023166
A2811717-401: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-33-107-3684
Angle Bracket

331073684
731589: RNCC: 3 | RNVC: 2

4 Oct 1999

5340-33-204-3664
Loop Clamp

332043664
41017508: RNCC: 3 | RNVC: 2

28 Jul 2005

5340-33-005-3793
Clamping Catch

330053793
066426: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-33-003-4302
Access Door Hinge

330034302
159-435: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-203-5486
Butt Hinge

332035486
80040001: RNCC: 3 | RNVC: 2

25 May 2004

5340-33-160-3811
Mounting Plate

331603811
95.537.303: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-1773
Retaining Clip

332041773
210044-8: RNCC: 3 | RNVC: 2
PS-610142: RNCC: 5 | RNVC: 2

25 Apr 2005

5340-33-000-1726
Snap Hook

330001726
1005-001184: RNCC: 3 | RNVC: 2

27 Nov 1986

5340-33-002-0099
Padlock

330020099
55 C: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-33-181-3588
Rod End Clevis

331813588
-06300195-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-6666
Angle Bracket

332006666
317315: RNCC: 3 | RNVC: 2

22 Feb 2002

5340-33-103-2239
Mounting Bracket

331032239
1055-000091: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-145-5906
Mounting Plate

331455906
TAB. D2-6: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-1228
Mounting Bracket

332001228
324124: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-001-4702
Access Cover

330014702
92026718: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-204-8192
Mounting Plate

332048192
J28664010-405: RNCC: 3 | RNVC: 2

6 Feb 2006

5340-33-145-5658
Mounting Bracket

331455658
78-064: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-0309
Mounting Bracket

330010309
35-43467-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-0362
Mounting Bracket

330010362
35-45001-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-000-2708
Angle Bracket

330002708
648022: RNCC: 1 | RNVC: 2
648022: RNCC: 3 | RNVC: 2

22 May 1987

5340-33-200-9807
Mounting Plate

332009807
2510008840: RNCC: 3 | RNVC: 2
2510008840: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-145-5779
Angle Bracket

331455779
03-257: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-153-9687
Door Handle

331539687
804971: RNCC: 3 | RNVC: 2

4 Jan 1990

5340-33-001-0696
Mounting Bracket

330010696
35-46343-0301: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-000-0460
Angle Bracket

330000460
H350GS/D023: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-108-4354
Butt Hinge

331084354
9644.251.5836: RNCC: 3 | RNVC: 2
2510900072: RNCC: 5 | RNVC: 2
2510900072: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-107-9846
Metal Grille

331079846
290.000.001: RNCC: 3 | RNVC: 2

2 Nov 2000

5340-33-160-5769
Mechanical Stop

331605769
95.589.879: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-4161
Mounting Bracket

332044161
W280698406601: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-201-1819
Mounting Plate

332011819
222433811-01: RNCC: 3 | RNVC: 2

28 May 2002

5340-33-200-3061
Mounting Plate

332003061
723571459-01: RNCC: 3 | RNVC: 2

12 Dec 2001

5340-33-001-0580
Mounting Bracket

330010580
35-46256-0401: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-204-9036
Mounting Plate

332049036
61128-29E00: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-108-2584
Mounting Bracket

331082584
9644.251.0380: RNCC: 3 | RNVC: 2
2510009951: RNCC: 5 | RNVC: 2
2510009951: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-181-1160
Retaining Strap

331811160
-47477-01W00: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-002-1201
Mounting Plate

330021201
2530-000216: RNCC: 3 | RNVC: 2

7 Jun 1993

5340-33-190-5586
Mounting Bracket

331905586
43176500-001: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-161-6185
Retaining Strap

331616185
GCH-3MS-003: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-201-0313
Mounting Bracket

332010313
4910700063: RNCC: 3 | RNVC: 2
4910700063: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-200-8955
Angle Bracket

332008955
W290698609700: RNCC: 3 | RNVC: 2

10 Apr 2002

5340-33-000-1883
Loop Clamp

330001883
146964: RNCC: 1 | RNVC: 2
146964: RNCC: 3 | RNVC: 2
91104541: RNCC: 5 | RNVC: 9

10 Dec 1986

5340-33-145-6031
Handwheel

331456031
TAB. H1-13: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-0279
Pipe Hanger

332060279
-48562-G9501: RNCC: 3 | RNVC: 2

4 Jul 2007

5340-33-103-1184
Mounting Bracket

331031184
375.093.3031: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-3065
Mounting Plate

331073065
21124685000: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-210-7046
Loop Clamp

332107046
XCWAB10010: RNCC: 3 | RNVC: 2

21 Jan 2013

5340-33-211-1152
Mending Plate

332111152
0214691: RNCC: 3 | RNVC: 2

16 Jun 2013

5340-33-003-5063
Loop Clamp

330035063
1212379: RNCC: 3 | RNVC: 2

13 Nov 1997

5340-33-001-2304
Rod End Connector

330012304
35-82203-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-188-8007
Expansion Plug

331888007
3 170 396: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-33-000-6920
Loop Clamp

330006920
190724: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-200-3864
Access Cover

332003864
CF 218 275 AR: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-108-2575
Mending Plate

331082575
9644.251.0153: RNCC: 3 | RNVC: 2
2510009931: RNCC: 5 | RNVC: 2
2510009931: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-180-7229
Mounting Bracket

331807229
272501: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-157-0113
Access Cover

331570113
-76831-G2590: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-2017
Mounting Bracket

332062017
CBD58505P68: RNCC: 3 | RNVC: 2

24 Sep 2007

5340-33-203-1972
Webbing Strap

332031972
9673.250.5981: RNCC: 3 | RNVC: 2
5340900148: RNCC: 5 | RNVC: 2
5340900148: RNCC: 5 | RNVC: 2

13 Feb 2004

5340-33-202-1321
Mounting Bracket

332021321
5030828: RNCC: 3 | RNVC: 2

28 Jan 2003

5340-33-204-6419
Retaining Strap

332046419
0850483001500: RNCC: 3 | RNVC: 2

17 Nov 2005

5340-33-204-6683
Access Cover

332046683
5037119: RNCC: 3 | RNVC: 2

28 Nov 2005

5340-33-211-2573
Angle Bracket

332112573
TP280100: RNCC: 3 | RNVC: 2

30 Jul 2013

5340-33-005-1670
Mounting Bracket

330051670
NN60192G01: RNCC: 3 | RNVC: 2

5 Dec 2000

5340-33-204-6677
Filler Opening Cap

332046677
5036731: RNCC: 3 | RNVC: 2

28 Nov 2005

5340-33-126-8117
Mounting Plate

331268117
649420: RNCC: 3 | RNVC: 2
649420.01: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-108-4164
Ball Socket Seat

331084164
9644.100.0295: RNCC: 3 | RNVC: 2
1005005702: RNCC: 5 | RNVC: 2
1005005702: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-189-1735
Elastic Strap

331891735
02240190: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-103-5124
Loop Clamp

331035124
1307: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-126-4207
Angle Bracket

331264207
C22156-N1000-B5: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-188-8615
Bumper

331888615
02330170: RNCC: 3 | RNVC: 2

18 Sep 1995

5340-33-160-4513
Access Cover

331604513
93.501.813: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-7067
Angle Bracket

330047067
NN50355: RNCC: 1 | RNVC: 2
NN50355P02: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-33-203-9978
Access Cover

332039978
999086440: RNCC: 3 | RNVC: 2
999086440: RNCC: 5 | RNVC: 2

31 Jan 2005

5340-33-200-2675
Utility Access Door

332002675
100402070100: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-33-106-8868
Mounting Bracket

331068868
7356.252.0580: RNCC: 3 | RNVC: 2
2530000904: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-157-9031
Mending Plate

331579031
319981: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-2328
Angle Bracket

331562328
-72410-G970X: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-208-4004
Utility Resilient Mount

332084004
135150: RNCC: 3 | RNVC: 2
BSB110-40SH-M16: RNCC: 5 | RNVC: 2

13 May 2010

5340-33-160-6486
Door Handle

331606486
95.513.655: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-203-6876
Utility Access Door

332036876
2123010290: RNCC: 3 | RNVC: 2

24 Aug 2004

5340-33-106-3037
Rigid Caster

331063037
112.5005.16.00: RNCC: 3 | RNVC: 2
192531: RNCC: 5 | RNVC: 2

4 Sep 1997

5340-33-154-6928
Angle Bracket

331546928
320197: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-203-5514
Access Cover

332035514
80060004: RNCC: 3 | RNVC: 2

25 May 2004

5340-33-116-5288
Mounting Plate

331165288
3623579: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-7475
Retaining Clip

331607475
79.03.079.224: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-203-1492
Access Cover

332031492
9673.250.5940: RNCC: 3 | RNVC: 2
2540900568: RNCC: 5 | RNVC: 2
2540900568: RNCC: 5 | RNVC: 2

6 Feb 2004

5340-33-001-2783
Loop Clamp

330012783
CAN67311-12: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-6837
Mounting Bracket

330016837
D58114-00: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-157-8440
Angle Bracket

331578440
753643: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-126-9073
Access Cover

331269073
04101009: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-200-2768
Access Door Hinge

332002768
100433020002: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-33-201-6052
Retaining Strap

332016052
0639.470.0561: RNCC: 3 | RNVC: 2
4730002413: RNCC: 5 | RNVC: 2
4730002413: RNCC: 5 | RNVC: 2

6 Sep 2002

5340-33-203-5523
Door Closer

332035523
80060023: RNCC: 3 | RNVC: 2

25 May 2004

5340-33-000-6986
Loop Clamp

330006986
770921: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-000-9630
Access Cover

330009630
35-11394-0102: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-204-8642
Mounting Bracket

332048642
TA1K1000B3: RNCC: 3 | RNVC: 2

15 Feb 2006

5340-33-004-7068
Angle Bracket

330047068
NN60083: RNCC: 1 | RNVC: 2
NN60083P01: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-33-005-0623
Section Block Clamp

330050623
NN60445G01: RNCC: 3 | RNVC: 2

13 Jun 2000

5340-33-125-5974
Loop Clamp

331255974
915998105002: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-2010
Rod End Clevis

331572010
EDDN-7591-B: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-6084
Butt Hinge

331546084
731946: RNCC: 3 | RNVC: 2
15100090: RNCC: 5 | RNVC: 9

1 Dec 1989

5340-33-002-0875
Mounting Bracket

330020875
319111: RNCC: 3 | RNVC: 2

30 Oct 1992

5340-33-003-4039
Access Cover

330034039
11.28944-1777: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-106-7391
Angle Bracket

331067391
1005.002324: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-001-6576
Pad Eye

330016576
CA85200-0001: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-202-5891
Angle Bracket

332025891
730708: RNCC: 3 | RNVC: 2

22 Aug 2003

5340-33-115-8522
Access Cover

331158522
H8/225/PH/1/8: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-33-106-1467
Retaining Strap

331061467
6.437.199.0 - MEISA: RNCC: 3 | RNVC: 2

14 May 1997

5340-33-166-0300
Angle Bracket

331660300
5.018.593.0: RNCC: 3 | RNVC: 2
5.018-593.0-MEISA: RNCC: 5 | RNVC: 2

20 Jul 1995

5340-33-200-8505
Access Cover

332008505
0639.250.9616: RNCC: 3 | RNVC: 2
2530000647: RNCC: 5 | RNVC: 2
2530000647: RNCC: 5 | RNVC: 2

5 Apr 2002

5340-33-157-8176
Access Cover

331578176
737378: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-3786
Loop Clamp

331553786
3090214349: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-155-2032
Loop Clamp

331552032
3000-410209: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-33-004-4358
Permanent Magnet

330044358
85.10.05.CT.50: RNCC: 3 | RNVC: 2

26 Mar 1999

5340-33-125-7088
Access Cover

331257088
682204349: RNCC: 3 | RNVC: 2

14 Sep 1995

5340-33-145-5907
Mounting Plate

331455907
TAB. D9-13: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-4094
Angle Bracket

332014094
A2810569-001: RNCC: 3 | RNVC: 2

9 Jul 2002

5340-33-001-0862
Mounting Bracket

330010862
35-46523-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-153-9689
Door Handle

331539689
816164: RNCC: 3 | RNVC: 2

4 Jan 1990

5340-33-108-4224
Access Cover

331084224
0639.250.4210: RNCC: 3 | RNVC: 2
2510007472: RNCC: 5 | RNVC: 2
2510007472: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-205-9248
Mounting Bracket

332059248
457155: RNCC: 3 | RNVC: 2

18 May 2007

5340-33-204-7516
Mounting Plate

332047516
5038128: RNCC: 3 | RNVC: 2
1.124.60.079.02-A: RNCC: 5 | RNVC: 2

5 Jan 2006

5340-33-160-3813
Mounting Plate

331603813
95.587.445: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-4806
Mechanical Stop

332014806
NN60596P01: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-154-6494
Loop Clamp

331546494
3090202449: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-190-2541
Retaining Strap

331902541
3224: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-116-0348
Angle Bracket

331160348
BA-15115000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-2462
Mounting Plate

331032462
1055-000391: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-105-2740
Mounting Bracket

331052740
-151110-0: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-33-102-0220
Rod End Clevis

331020220
2510-000433: RNCC: 3 | RNVC: 2
2510000433: RNCC: 5 | RNVC: 2
411.090.0543: RNCC: 5 | RNVC: 2

6 Aug 1992

5340-33-202-6415
Mounting Bracket

332026415
9673.250.0093: RNCC: 3 | RNVC: 2
2510900517: RNCC: 5 | RNVC: 2
2510900517: RNCC: 5 | RNVC: 2

19 Sep 2003

5340-33-001-0625
Mounting Bracket

330010625
35-46274-0004: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-000-0096
Snap Hook

330000096
1005000139: RNCC: 1 | RNVC: 2
1005-000139: RNCC: 3 | RNVC: 2

15 Jul 1985

5340-33-001-1606
Angle Bracket

330011606
35-61016-0501: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-1019
Mounting Bracket

330011019
35-46701-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-202-3525
Mounting Bracket

332023525
W290609516000: RNCC: 3 | RNVC: 2

21 Apr 2003

5340-33-116-3115
Angle Bracket

331163115
8865.069: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-0636
Bridge Clamp

331160636
BA-18137000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-1342
Access Cover

332021342
CN31703.21.203-02: RNCC: 3 | RNVC: 2

28 Jan 2003

5340-33-116-1345
Expansion Plug

331161345
BV-12265101: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-114-5018
Lock-Release Lever

331145018
5TG 2-147: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-003-6856
Access Cover

330036856
CM30662373800: RNCC: 3 | RNVC: 2

1 Jun 1998

5340-33-004-6209
Mechanical Stop

330046209
0015881900: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-154-7491
Butt Hinge

331547491
731947: RNCC: 3 | RNVC: 2
15100091: RNCC: 5 | RNVC: 9

3 Dec 1990

5340-33-106-7312
Door Closer

331067312
00.429.847.00: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-103-5121
Retaining Strap

331035121
1304: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-204-1271
Bumper

332041271
M2.00007: RNCC: 3 | RNVC: 2

4 Apr 2005

5340-33-205-5775
Rod End Clevis

332055775
CBD58504P37: RNCC: 3 | RNVC: 2

21 Dec 2006

5340-33-154-2221
Mending Plate

331542221
568733: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-001-3450
Detent Plunger

330013450
92014690: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-126-9030
Angle Bracket

331269030
04110008: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-201-5538
Block Clamp

332015538
223561703-01: RNCC: 3 | RNVC: 2

2 Sep 2002

5340-33-200-2275
Mounting Plate

332002275
723571446-01: RNCC: 3 | RNVC: 2
723571446-01: RNCC: 5 | RNVC: 2

15 Nov 2001

5340-33-202-9032
Access Cover

332029032
723551383-01: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-202-6550
Mounting Plate

332026550
223551341-01: RNCC: 3 | RNVC: 2

22 Sep 2003

5340-33-004-8566
Mounting Bracket

330048566
SP08840: RNCC: 3 | RNVC: 2

14 Dec 1999

5340-33-116-1834
Ball Socket Seat

331161834
896 056: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-1487
Mounting Bracket

332031487
9673.250.5405: RNCC: 3 | RNVC: 2
2540900803: RNCC: 5 | RNVC: 2
2540900803: RNCC: 5 | RNVC: 2

6 Feb 2004

5340-33-001-3896
Bumper

330013896
92020303: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-201-2196
Access Cover

332012196
A2810453-401: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-126-4115
Loop Clamp

331264115
C39195-Z28-C21: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-003-7945
Handle Grip

330037945
1016025: RNCC: 3 | RNVC: 2

9 Jun 1998

5340-33-190-3889
Loop Clamp

331903889
2272: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-209-4398
Utility Guard Rail Section

332094398
0662.10.3005.00: RNCC: 3 | RNVC: 2

20 Dec 2011

5340-33-201-9847
Mounting Plate

332019847
223591326-01: RNCC: 3 | RNVC: 2

5 Dec 2002

5340-33-103-1178
Mounting Bracket

331031178
222109275: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-33-107-8229
Rod End Connector

331078229
185003: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-33-115-8159
Access Cover

331158159
92290217518: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-210-9860
Angle Bracket

332109860
INS030245001000000: RNCC: 3 | RNVC: 2

28 Apr 2013

5340-33-108-6309
Access Cover

331086309
204493: RNCC: 3 | RNVC: 2

30 Apr 2001

5340-33-000-6985
Loop Clamp

330006985
770771: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-206-2917
Mounting Bracket

332062917
PCMSABMR102: RNCC: 3 | RNVC: 2

26 Oct 2007

5340-33-003-6328
Mounting Plate

330036328
649391: RNCC: 3 | RNVC: 2

25 May 1998

5340-33-180-7435
Angle Bracket

331807435
345552: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-203-9491
Retaining Strap

332039491
20780033: RNCC: 3 | RNVC: 2
33R288283: RNCC: 5 | RNVC: 1

27 Jan 2005

5340-33-155-7480
Mending Plate

331557480
315569: RNCC: 3 | RNVC: 2
315569: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-108-2653
Mounting Bracket

331082653
9644.121.0420: RNCC: 3 | RNVC: 2
2510010697: RNCC: 5 | RNVC: 2
2510010697: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-106-7911
Stand Base

331067911
RE-50-2-9-4: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-33-108-1938
Loop Clamp

331081938
4730002529: RNCC: 3 | RNVC: 2

29 Jan 2001

5340-33-155-7457
Mending Plate

331557457
500006566: RNCC: 3 | RNVC: 2
571656: RNCC: 5 | RNVC: 9

18 Oct 1990

5340-33-200-7477
Angle Bracket

332007477
7053.252.0960: RNCC: 3 | RNVC: 2
2510700405: RNCC: 5 | RNVC: 2

6 Mar 2002

5340-33-202-6716
Mounting Plate

332026716
5032278: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-33-004-5306
Bail Handle

330045306
157458: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-161-6165
Retaining Strap

331616165
17389: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-154-5673
Mending Plate

331545673
319123: RNCC: 3 | RNVC: 2
319123: RNCC: 5 | RNVC: 9

1 Oct 1990

5340-33-126-4354
Mounting Bracket

331264354
S22711-N-L103-A1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-8077
Eye Hook

332058077
14405002960: RNCC: 3 | RNVC: 2

11 Apr 2007

5340-33-107-7441
Loop Clamp

331077441
W290684024100: RNCC: 3 | RNVC: 2

25 May 2000

5340-33-202-7004
Mounting Bracket

332027004
9673.250.8050: RNCC: 3 | RNVC: 2
2540901446: RNCC: 5 | RNVC: 2
2540901446: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-145-5905
Mounting Plate

331455905
TAB. D2-5: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3681
Compression Cup

330013681
92019217: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-108-2556
Mounting Plate

331082556
9644.251.0510: RNCC: 3 | RNVC: 2
2510009652: RNCC: 5 | RNVC: 2
2510009652: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-155-7521
Mending Plate

331557521
695970: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-161-7041
Padlock

331617041
500/70: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-160-3688
Bumper

331603688
1620060: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3708
Compression Cup

330013708
92019312: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-189-1905
Metal Grille

331891905
02180020: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-000-6717
Retaining Strap

330006717
801121: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-202-9883
Mounting Bracket

332029883
723551815-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-155-7779
Angle Bracket

331557779
754093: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-154-6529
Loop Clamp

331546529
320597: RNCC: 3 | RNVC: 2
320597: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-154-6518
Loop Clamp

331546518
315172: RNCC: 3 | RNVC: 2
315172: RNCC: 5 | RNVC: 9

1 Oct 1990

5340-33-187-4833
Access Cover

331874833
118588: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-000-9998
Mending Plate

330009998
35-31278-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-200-2666
Utility Access Door

332002666
100402011000: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-33-160-7769
Runner

331607769
8422.21: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-205-7047
Turnbuckle

332057047
45-1/2 GANCHO: RNCC: 3 | RNVC: 2
4030-33-P42-7962: RNCC: 6 | RNVC: 9

27 Feb 2007

5340-33-001-9138
Expansion Shield

330019138
C-20050-13-0-I-04-11: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-103-0162
Compression Cup

331030162
919-3-12: RNCC: 3 | RNVC: 2

13 Nov 1992

5340-33-189-1774
Access Cover

331891774
02080020: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-107-4355
Mounting Plate

331074355
W290683120200: RNCC: 3 | RNVC: 2

13 Oct 1999

5340-33-203-1076
Access Cover

332031076
1025-900863: RNCC: 3 | RNVC: 2

29 Jan 2004

5340-33-157-8515
Angle Bracket

331578515
772253: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-4435
Retaining Strap

331084435
9644.250.8240: RNCC: 3 | RNVC: 2
2540001052: RNCC: 5 | RNVC: 2
2540001052: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-200-2954
Lock Key

332002954
196923: RNCC: 3 | RNVC: 2

30 Nov 2001

5340-33-154-6519
Loop Clamp

331546519
317270: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-202-9964
Angle Bracket

332029964
MHC2120230: RNCC: 3 | RNVC: 2
MHC1120230: RNCC: 5 | RNVC: 2

19 Dec 2003

5340-33-204-1324
Access Cover

332041324
201525805: RNCC: 3 | RNVC: 2
201525805: RNCC: 5 | RNVC: 2
9999-33-R29-4045: RNCC: 6 | RNVC: 9

6 Apr 2005

5340-33-105-7505
Mending Plate

331057505
755895: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-33-154-5676
Mending Plate

331545676
319980: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-155-7723
Angle Bracket

331557723
516222: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-204-7095
Bumper

332047095
M501923400000: RNCC: 3 | RNVC: 2

13 Dec 2005

5340-33-203-6361
Shimmy Damper

332036361
303051: RNCC: 3 | RNVC: 2
303051: RNCC: 5 | RNVC: 2

16 Jul 2004

5340-33-154-0463
Expansion Plug

331540463
3340801049: RNCC: 3 | RNVC: 2

29 Jan 1990

5340-33-155-7767
Angle Bracket

331557767
315672: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-205-0106
Access Cover

332050106
19623200: RNCC: 3 | RNVC: 2

30 Mar 2006

5340-33-203-1809
Mounting Bracket

332031809
9673.250.7880: RNCC: 3 | RNVC: 2
2540901144: RNCC: 5 | RNVC: 2
2540901144: RNCC: 5 | RNVC: 2

11 Feb 2004

5340-33-108-4427
Cushioning Pad

331084427
9644.250.5969: RNCC: 3 | RNVC: 2
2540000997: RNCC: 5 | RNVC: 2
2540000997: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-155-6967
Mounting Bracket

331556967
176462: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-187-5592
Loop Clamp

331875592
0301153-9: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-0195
Bow Handle

331540195
571897: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-002-0093
Padlock

330020093
100A: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-33-108-6958
Rigid Caster

331086958
403/80X32/NYL: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-33-203-6514
Mounting Bracket

332036514
9356.252.7050: RNCC: 3 | RNVC: 2
2510-903913: RNCC: 5 | RNVC: 2

20 Jul 2004

5340-33-202-4681
Handle Grip

332024681
9433011: RNCC: 3 | RNVC: 2

30 Jun 2003

5340-33-202-6568
Angle Bracket

332026568
MHC2120700: RNCC: 3 | RNVC: 2
MHC1120700: RNCC: 5 | RNVC: 2

23 Sep 2003

5340-33-161-4651
Mounting Plate

331614651
2510-003663: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-33-156-4613
Door Handle

331564613
-80595-01W00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-126-4350
Mounting Bracket

331264350
S22711-N1000-H201: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-2183
Utility Access Door

332012183
A2810489-401: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-103-1135
Access Cover

331031135
222109127: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-33-116-3573
Access Cover

331163573
6645.308: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-104-8061
Access Cover

331048061
144154: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-115-8174
Access Cover

331158174
10205001580: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-107-9022
Mounting Plate

331079022
1-KPB-000007: RNCC: 3 | RNVC: 2

13 Sep 2000

5340-33-211-4953
Casement Fastener

332114953
0205320: RNCC: 3 | RNVC: 2

22 Nov 2013

5340-33-201-9481
Angle Bracket

332019481
A2811830-401: RNCC: 3 | RNVC: 2

20 Nov 2002

5340-33-107-5811
Plain Solid Disk

331075811
HP264216501: RNCC: 3 | RNVC: 2
HP264216502: RNCC: 5 | RNVC: 2

27 Jan 2000

5340-33-204-4154
Mounting Bracket

332044154
W280698411003: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-108-6978
Mounting Plate

331086978
7059.252.0011: RNCC: 3 | RNVC: 2
2510700679: RNCC: 5 | RNVC: 2

14 Jun 2001

5340-33-205-3390
Mounting Bracket

332053390
999098411: RNCC: 3 | RNVC: 2
999098411: RNCC: 5 | RNVC: 2

16 Aug 2006

5340-33-001-4709
Mounting Bracket

330014709
92026726: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-204-5709
Block Clamp

332045709
M.A.S. 841-26.2-3: RNCC: 3 | RNVC: 2

18 Oct 2005

5340-33-107-4917
Mounting Plate

331074917
W290684704100: RNCC: 3 | RNVC: 2

1 Dec 1999

5340-33-204-4160
Mounting Bracket

332044160
W280698493606: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-001-0393
Rod End Clevis

330010393
35-45163-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-9622
Access Cover

330019622
CAN68512-16: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-33-200-8935
Mounting Plate

332008935
W290698609100: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-33-206-1972
Section Block Clamp

332061972
CBD58505P62: RNCC: 3 | RNVC: 2

24 Sep 2007

5340-33-104-6564
Door Holder

331046564
92.990.12.58.10: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-33-200-5669
Loop Clamp

332005669
NN60673G01: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-33-004-4849
Catch Strike

330044849
201942: RNCC: 3 | RNVC: 2

2 Jun 1999

5340-33-001-2281
Mounting Bracket

330012281
35-81994-0401: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-116-1364
Retaining Strap

331161364
BJ-17199000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-1944
Mechanical Stop

332061944
35-22070-2603A01: RNCC: 3 | RNVC: 2

21 Sep 2007

5340-33-103-7797
Door Handle

331037797
BN-61612: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-2734
Access Cover

332012734
D0941411757: RNCC: 3 | RNVC: 2

12 Jun 2002

5340-33-155-7462
Mending Plate

331557462
319617: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-202-6924
Mounting Bracket

332026924
9673.250.5380: RNCC: 3 | RNVC: 2
2510900637: RNCC: 5 | RNVC: 2
2510900637: RNCC: 5 | RNVC: 2

26 Sep 2003

5340-33-203-5482
Thumb Latch

332035482
212-22125-41.3: RNCC: 3 | RNVC: 2

22 May 2004

5340-33-154-8724
Access Cover

331548724
9 121 140 298: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-102-1485
Handwheel

331021485
B-2-76: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-187-5600
Loop Clamp

331875600
0301161-9: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-187-3164
T Plate

331873164
528206: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-7694
Mounting Bracket

330047694
-01605328-0: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-33-206-1699
Access Cover

332061699
306CH173200: RNCC: 3 | RNVC: 2

14 Sep 2007

5340-33-189-1706
Bumper

331891706
6123027: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-3123
Retaining Strap

331613123
515902: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-161-5162
Mounting Bracket

331615162
317680: RNCC: 3 | RNVC: 2

4 Mar 1994

5340-33-115-8157
Access Cover

331158157
92290217632: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-002-9630
Door Handle

330029630
6317600561: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-205-4011
Mounting Plate

332054011
5039780: RNCC: 3 | RNVC: 2
1.143.60.915: RNCC: 5 | RNVC: 2

14 Sep 2006

5340-33-106-1360
Mounting Plate

331061360
631 630 16 48: RNCC: 3 | RNVC: 2

7 Apr 1997

5340-33-201-8236
Extension Handle

332018236
5340001660: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-204-7509
Access Cover

332047509
5037130: RNCC: 3 | RNVC: 2
1.124.92.016: RNCC: 5 | RNVC: 2

5 Jan 2006

5340-33-004-8949
Block Clamp

330048949
NN58382P01: RNCC: 3 | RNVC: 2

28 Jan 2000

5340-33-158-9480
Loop Clamp

331589480
739916: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-33-180-5889
Access Cover

331805889
164886: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-154-6545
Loop Clamp

331546545
649550: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-126-5774
Rod End Connector

331265774
G59303-R-0700: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-7019
Block Clamp

330047019
NN60119G02: RNCC: 3 | RNVC: 2

3 Sep 1999

5340-33-161-7040
Padlock

331617040
500/50: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-102-2653
Runner

331022653
1005-001667: RNCC: 3 | RNVC: 2

1 Mar 1991

5340-33-001-3772
Retaining Strap

330013772
92019929: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-001-4467
Retaining Strap

330014467
92026353: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-203-8466
Mounting Plate

332038466
191142702: RNCC: 3 | RNVC: 2
191142702: RNCC: 5 | RNVC: 2

30 Nov 2004

5340-33-003-7753
Lock Key

330037753
LDB/5: RNCC: 3 | RNVC: 2

5 Jun 1998

5340-33-201-7194
Angle Bracket

332017194
1025-901419: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-33-160-7502
Retaining Clip

331607502
79.03.076.124: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-204-4268
Mounting Bracket

332044268
W280698407501: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-200-5332
Loop Clamp

332005332
4730000517: RNCC: 3 | RNVC: 2

1 Feb 2002

5340-33-202-8403
Webbing Strap

332028403
89.28.51: RNCC: 3 | RNVC: 2

10 Nov 2003

5340-33-108-5153
Access Cover

331085153
755633: RNCC: 3 | RNVC: 2

16 Apr 2001

5340-33-107-0610
Catch Strike

331070610
0402SC: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-001-5640
Compression Cup

330015640
92041369: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-145-5237
Access Cover

331455237
14-096: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-000-7069
Retaining Band

330007069
806821: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-161-5153
Mounting Bracket

331615153
2520000286: RNCC: 3 | RNVC: 2
322620: RNCC: 3 | RNVC: 2

4 Mar 1994

5340-33-200-5690
Mounting Bracket

332005690
SPA800019: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-33-107-8849
Access Cover

331078849
W290683339900: RNCC: 3 | RNVC: 2

24 Aug 2000

5340-33-004-7066
Angle Bracket

330047066
NN50354: RNCC: 1 | RNVC: 2
NN50354P01: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-33-155-5564
Door Handle

331555564
734613: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-155-7441
Mending Plate

331557441
506818: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-161-3507
Pad Eye

331613507
566072: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-155-6238
Access Cover

331556238
821121: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-202-6373
Mounting Bracket

332026373
68-60238-00: RNCC: 3 | RNVC: 2
68-60238-00: RNCC: 5 | RNVC: 2
1400686023800: RNCC: 5 | RNVC: 2

17 Sep 2003

5340-33-116-8640
Retaining Strap

331168640
598/11: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-155-7711
Angle Bracket

331557711
642291: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-201-9613
Bridge Clamp

332019613
ABRACO2302R: RNCC: 3 | RNVC: 2

29 Nov 2002

5340-33-211-4948
Access Door Hinge

332114948
0112796: RNCC: 3 | RNVC: 2

22 Nov 2013

5340-33-201-3402
Mounting Bracket

332013402
01.722.30: RNCC: 3 | RNVC: 2

27 Jun 2002

5340-33-201-0203
Retaining Strap

332010203
2910900104: RNCC: 3 | RNVC: 2
2910900104: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-202-5167
Mounting Plate

332025167
722421710-01: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-33-106-5792
Access Cover

331065792
1397624: RNCC: 3 | RNVC: 2
1397624: RNCC: 5 | RNVC: 2

31 Mar 1999

5340-33-181-0150
Mending Plate

331810150
-10006-37500: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-0923
Mounting Bracket

330010923
35-46633-1101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-201-4003
Angle Bracket

332014003
A2810452-001: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-145-5670
Mounting Bracket

331455670
85-441: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-211-4991
Retaining Band

332114991
10-43259-0301: RNCC: 3 | RNVC: 2

22 Nov 2013

5340-33-116-5517
Access Cover

331165517
19610-ZE0-810: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-4482
Access Door Hinge

331084482
9644.251.8710: RNCC: 3 | RNVC: 2
2540900311: RNCC: 5 | RNVC: 2
2540900311: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-108-5423
Catch Strike

331085423
9644.251.6448: RNCC: 3 | RNVC: 2
2510901177: RNCC: 5 | RNVC: 2
2510901177: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-103-0788
Mounting Bracket

331030788
2510-001024: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-1202
Rod End Clevis

330011202
35-49145-0101: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-204-8015
Stand Base

332048015
VR05010210: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-33-106-8655
Mounting Plate

331068655
7356.252.0483: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-157-7964
Access Cover

331577964
647332: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-2113
Angle Bracket

330042113
321623: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-116-5537
Access Cover

331165537
17220-896-000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-6251
Mending Plate

332026251
9673.250.0471: RNCC: 3 | RNVC: 2
1005900553: RNCC: 5 | RNVC: 2
1005900553: RNCC: 5 | RNVC: 2

16 Sep 2003

5340-33-210-2011
Mounting Bracket

332102011
999156441: RNCC: 3 | RNVC: 2
999156441: RNCC: 5 | RNVC: 2

22 Jun 2012

5340-33-001-4252
Retaining Strap

330014252
92026037: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-001-0680
Mounting Bracket

330010680
35-46335-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-205-4784
Retaining Strap

332054784
CS-295-AG1110402: RNCC: 3 | RNVC: 2

26 Oct 2006

5340-33-203-6116
Filler Opening Cap

332036116
5.132-059.0: RNCC: 3 | RNVC: 2
PCAMI/RP/1200005132059: RNCC: 5 | RNVC: 2

12 Jun 2004

5340-33-201-8198
Utility Access Door

332018198
2540000601: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-201-0172
Bow Handle

332010172
2910000299: RNCC: 3 | RNVC: 2
2910000299: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-202-4028
Angle Bracket

332024028
0110680000100: RNCC: 3 | RNVC: 2

9 May 2003

5340-33-206-9553
Utility Resilient Mount

332069553
136025: RNCC: 3 | RNVC: 2
UP125: RNCC: 5 | RNVC: 2

26 Sep 2008

5340-33-204-0369
Webbing Strap

332040369
PS-911739: RNCC: 3 | RNVC: 2

8 Feb 2005

5340-33-108-0205
Mounting Plate

331080205
9644.251.8200: RNCC: 3 | RNVC: 2
2540900241: RNCC: 5 | RNVC: 2
2540900241: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-005-3250
Access Cover

330053250
93193161: RNCC: 3 | RNVC: 2

25 Jun 2001

5340-33-154-0246
Butt Hinge

331540246
507166: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-161-2750
Key Blank

331612750
1905930722: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-160-7470
Retaining Clip

331607470
GX 50.449.01A: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-202-0481
Retaining Strap

332020481
1025-900869: RNCC: 3 | RNVC: 2

2 Jan 2003

5340-33-103-0912
Loop Clamp

331030912
411.090.0572: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-9417
Mounting Plate

331069417
325012: RNCC: 3 | RNVC: 2

7 Apr 1999

5340-33-181-1153
Retaining Strap

331811153
-20550-C8200: RNCC: 3 | RNVC: 2
20550C8200: RNCC: 6 | RNVC: 9

20 Jul 1995

5340-33-206-1314
Mounting Plate

332061314
PCMSABMR079: RNCC: 3 | RNVC: 2

30 Aug 2007

5340-33-003-4178
Access Cover

330034178
11.28951-2628-SE: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-157-8022
Angle Bracket

331578022
697243: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-200-4296
Mounting Plate

332004296
7054.592.0012: RNCC: 3 | RNVC: 2
2510701110: RNCC: 5 | RNVC: 2

25 Jan 2002

5340-33-103-2249
Mounting Bracket

331032249
1055-000111: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-3752
Angle Bracket

332043752
NN60897P01: RNCC: 3 | RNVC: 2

18 Aug 2005

5340-33-106-5133
Mounting Bracket

331065133
021.04.01: RNCC: 3 | RNVC: 2

23 Mar 1998

5340-33-107-6128
Mounting Plate

331076128
110067: RNCC: 3 | RNVC: 2

17 Mar 2000

5340-33-200-9706
Mounting Plate

332009706
2510003208: RNCC: 3 | RNVC: 2
2510003208: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-154-6588
Retaining Band

331546588
317874: RNCC: 3 | RNVC: 2
317874: RNCC: 5 | RNVC: 9

1 Oct 1990

5340-33-154-5505
Retaining Strap

331545505
5340001077: RNCC: 3 | RNVC: 2
313293: RNCC: 3 | RNVC: 2
313293: RNCC: 5 | RNVC: 9

1 Oct 1990

5340-33-157-8007
Angle Bracket

331578007
691282: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-2066
Mounting Bracket

332042066
750704: RNCC: 3 | RNVC: 2

11 May 2005

5340-33-155-7465
Mending Plate

331557465
313261: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-103-2019
Loop Clamp

331032019
9039.03.000.240: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-2845
Angle Bracket

330042845
NN60217P01: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-205-8225
Mounting Bracket

332058225
MAM-HE-01-00-07: RNCC: 3 | RNVC: 2

17 Apr 2007

5340-33-202-6733
Mechanical Stop

332026733
5032049: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-33-154-2250
Mending Plate

331542250
768602: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-210-9595
Lock Key

332109595
235678: RNCC: 3 | RNVC: 2

21 Apr 2013

5340-33-156-3227
Access Door Hinge

331563227
-80420-G9600: RNCC: 3 | RNVC: 2

12 Jun 1995

5340-33-201-7938
Mounting Bracket

332017938
319739: RNCC: 3 | RNVC: 2

24 Oct 2002

5340-33-155-7517
Mending Plate

331557517
683573: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-155-9249
Turnbuckle

331559249
615247: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-154-8329
Retaining Clip

331548329
8565.16: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-157-8160
Access Cover

331578160
736181: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-8537
Mounting Bracket

332008537
9644.251.5204: RNCC: 3 | RNVC: 2
2530000978: RNCC: 5 | RNVC: 2
2530000978: RNCC: 5 | RNVC: 2

5 Apr 2002

5340-33-181-2066
Access Cover

331812066
-03903190-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-3359
Rod End Clevis

330013359
92014009: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-160-4516
Access Cover

331604516
93.010.170: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-3270
Pipe Hanger

331563270
-97644-G2500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-7006
Mounting Bracket

332027006
9673.250.8060: RNCC: 3 | RNVC: 2
2540901447: RNCC: 5 | RNVC: 2
2540901447: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-157-8262
Angle Bracket

331578262
744996: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-7478
Mending Plate

331557478
569067: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-105-1070
Rod End Connector

331051070
42320010110: RNCC: 3 | RNVC: 2
42320010110: RNCC: 3 | RNVC: 2
VB-400-C-0300: RNCC: 5 | RNVC: 2

19 Nov 1997

5340-33-001-3777
Angle Bracket

330013777
92020003: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-202-7724
Angle Bracket

332027724
NN60905G01: RNCC: 3 | RNVC: 2

23 Oct 2003

5340-33-001-3147
Fusible Plug

330013147
5SH112: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-204-3119
Loop Clamp

332043119
706200024: RNCC: 3 | RNVC: 2

30 Jun 2005

5340-33-000-7492
Angle Bracket

330007492
640092: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-004-5279
Locking Stay

330045279
052002: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-000-2881
Access Cover

330002881
577058: RNCC: 1 | RNVC: 2

22 May 1987

5340-33-211-0083
Access Cover

332110083
27421003: RNCC: 3 | RNVC: 2

10 May 2013

5340-33-001-4843
Retaining Strap

330014843
92027405: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-204-6334
Bow Handle

332046334
11171: RNCC: 3 | RNVC: 2

11 Nov 2005

5340-33-001-1188
Mounting Bracket

330011188
35-49129-0005: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-000-7507
Angle Bracket

330007507
785091: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-001-4217
Bumper

330014217
92023800: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-108-2694
Mechanical Stop

331082694
9644.251.0402: RNCC: 3 | RNVC: 2
2510900331: RNCC: 5 | RNVC: 2
2510900331: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-156-4624
Door Handle

331564624
-80607-G2500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-6283
Access Cover

331556283
900201: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-200-5131
Mounting Bracket

332005131
19567010: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-107-4354
Mounting Plate

331074354
W290683104600: RNCC: 3 | RNVC: 2

13 Oct 1999

5340-33-004-6211
Mechanical Stop

330046211
144052607: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-107-7495
Mounting Plate

331077495
W290684074200: RNCC: 3 | RNVC: 2

25 May 2000

5340-33-154-6063
Catch Strike

331546063
311592: RNCC: 3 | RNVC: 2
5340001041: RNCC: 3 | RNVC: 2
311592: RNCC: 5 | RNVC: 9

1 Dec 1989

5340-33-200-8925
Angle Bracket

332008925
W290698608800: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-33-104-7536
Webbing Strap

331047536
3420.402: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3889
Angle Bracket

330013889
92020270: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-161-5113
Mortise Lock Set

331615113
230066: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-6864
Permanent Magnet

332036864
2123010330: RNCC: 3 | RNVC: 2

24 Aug 2004

5340-33-000-6995
Loop Clamp

330006995
782554: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-157-7343
Access Cover

331577343
321605: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-8406
Access Cover

331558406
8331801140: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-33-200-8086
Mounting Plate

332008086
324141: RNCC: 3 | RNVC: 2

13 Mar 2002

Load More Results