What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 6 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 6 of 39

5340-33-206-2015
Mechanical Stop

332062015
CBD58505P02: RNCC: 3 | RNVC: 2

24 Sep 2007

5340-33-155-7461
Mending Plate

331557461
312376: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-201-0257
Mounting Bracket

332010257
3465010352: RNCC: 3 | RNVC: 2
3465010352: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-001-1537
Rod End Connector

330011537
35-56168-0503: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-103-2480
Mounting Plate

331032480
1055-000498: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-2448
Mounting Plate

331032448
1055-000371: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-102-1393
Lock-Release Lever

331021393
70B-0463: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-001-1550
Mounting Bracket

330011550
35-56240-0005: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-1217
Mounting Bracket

330011217
35-49200-0301: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-116-5783
Mounting Bracket

331165783
16581-ZE0-810: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-4668
Access Door Hinge

330024668
212-21126-01-1: RNCC: 3 | RNVC: 2
212-21126-01.1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-201-2184
Utility Access Door

332012184
A2810490-001: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-107-2291
Beam Gripping Clamp

331072291
32530001080: RNCC: 3 | RNVC: 2

25 Jun 1999

5340-33-105-2225
Mounting Plate

331052225
-14200365-0: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-102-2464
Mounting Bracket

331022464
1005-001748: RNCC: 3 | RNVC: 2

15 Jan 1991

5340-33-001-2863
Mounting Bracket

330012863
CAN68088-1256: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-33-116-3545
Mending Plate

331163545
5168.005: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-1914
Access Cover

330041914
730092503: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-103-4536
Mounting Bracket

331034536
330559: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-7031
Access Cover

332037031
191005693: RNCC: 3 | RNVC: 2
191005693: RNCC: 5 | RNVC: 2

9 Sep 2004

5340-33-161-3742
Access Cover

331613742
621536: RNCC: 3 | RNVC: 2

31 Oct 1996

5340-33-211-4742
Mounting Bracket

332114742
TOM0203202P06: RNCC: 3 | RNVC: 2
TOM0203202P06: RNCC: 3 | RNVC: 2

16 Nov 2013

5340-33-000-6923
Loop Clamp

330006923
500998: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-157-8170
Blank Panel

331578170
737069: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-4134
Angle Bracket

331614134
738997: RNCC: 3 | RNVC: 2
690584: RNCC: 5 | RNVC: 2

28 Apr 1995

5340-33-204-6496
Loop Clamp

332046496
20108: RNCC: 3 | RNVC: 2

21 Nov 2005

5340-33-202-0558
Mounting Bracket

332020558
1025-900238: RNCC: 3 | RNVC: 2

2 Jan 2003

5340-33-116-8331
Mounting Bracket

331168331
22 534: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-4811
Threaded Rod End

331164811
92275202939: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-107-4912
Mounting Bracket

331074912
W290684780800: RNCC: 3 | RNVC: 2

29 Nov 1999

5340-33-154-8224
Access Cover

331548224
193168: RNCC: 3 | RNVC: 2
20025-44: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-201-0031
Retaining Strap

332010031
2510901812: RNCC: 3 | RNVC: 2
2510901812: RNCC: 5 | RNVC: 2

22 Apr 2002

5340-33-200-4494
Retaining Strap

332004494
WW 434 410: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-208-8549
Utility Access Door

332088549
VRAC990130000010: RNCC: 3 | RNVC: 2

28 Mar 2011

5340-33-107-8113
Access Door Hinge

331078113
230037: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-33-107-4460
Retaining Strap

331074460
W267000001205: RNCC: 3 | RNVC: 2

13 Oct 1999

5340-33-155-7538
Mending Plate

331557538
819658: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-108-2233
Mending Plate

331082233
9644.101.0033: RNCC: 3 | RNVC: 2
1005006361: RNCC: 5 | RNVC: 2
1005006361: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-107-9609
Bow Handle

331079609
00.900.10.002: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-33-208-7400
Utility Resilient Mount

332087400
137042: RNCC: 3 | RNVC: 2
40000472: RNCC: 5 | RNVC: 2

24 Jan 2011

5340-33-001-4036
Strap Fastener Loop

330014036
92021305: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-102-5903
Retaining Strap

331025903
256-B: RNCC: 3 | RNVC: 2

25 Jul 1995

5340-33-201-0447
Rigid Caster

332010447
5340700019: RNCC: 3 | RNVC: 2
5340700019: RNCC: 5 | RNVC: 2

24 Apr 2002

5340-33-105-2091
Access Cover

331052091
-03902886-0: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-157-8078
Access Cover

331578078
713399: RNCC: 3 | RNVC: 2
42100020: RNCC: 5 | RNVC: 9

28 Apr 1995

5340-33-205-0824
Mending Plate

332050824
M.8000.002: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-33-203-2741
Catch Strike

332032741
9673.100.0049: RNCC: 3 | RNVC: 2
1005900387: RNCC: 5 | RNVC: 2
1005900387: RNCC: 5 | RNVC: 2

19 Feb 2004

5340-33-002-9605
Catch Strike

330029605
6317431503: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-105-7298
Flush Bolt

331057298
-82504-Y9500: RNCC: 3 | RNVC: 2

9 May 1996

5340-33-205-4435
Retaining Strap

332054435
5340900024: RNCC: 3 | RNVC: 2
9682.101.6606: RNCC: 5 | RNVC: 2

2 Oct 2006

5340-33-158-2231
Retaining Clip

331582231
0216523-2: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-145-6362
Access Cover

331456362
73800019-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-5778
Mechanical Stop

331605778
79.03.088.088: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-6305
Lock-Release Lever

332056305
1025901986: RNCC: 3 | RNVC: 2
9743.100.0605: RNCC: 5 | RNVC: 2

23 Jan 2007

5340-33-180-6776
Rigid Caster

331806776
217983: RNCC: 3 | RNVC: 2
217983: RNCC: 6 | RNVC: 9

20 Jul 1995

5340-33-200-9146
Mounting Plate

332009146
709035109: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-33-206-1731
Mounting Bracket

332061731
PCMSABMR096: RNCC: 3 | RNVC: 2

14 Sep 2007

5340-33-116-8165
Retaining Strap

331168165
10.18: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-180-9272
Access Cover

331809272
127429: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-211-1190
Webbing Strap

332111190
0236388: RNCC: 3 | RNVC: 2

16 Jun 2013

5340-33-106-4707
Mounting Bracket

331064707
98403038: RNCC: 3 | RNVC: 2

6 Mar 1998

5340-33-107-7876
Angle Bracket

331077876
W290684601700: RNCC: 3 | RNVC: 2

3 Aug 2000

5340-33-106-7421
Angle Bracket

331067421
313516: RNCC: 3 | RNVC: 2

22 Mar 1999

5340-33-108-5408
Lock Bolt

331085408
9644.251.6293: RNCC: 3 | RNVC: 2
2510901033: RNCC: 5 | RNVC: 2
2510901033: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-166-0437
Access Cover

331660437
EV-23109: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-2893
Mounting Plate

332002893
723571408-01: RNCC: 3 | RNVC: 2

27 Nov 2001

5340-33-004-5226
Access Cover

330045226
11994-10: RNCC: 3 | RNVC: 2
191958: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-107-8660
Buckle

331078660
018HP24138: RNCC: 3 | RNVC: 2
PCAMI/RP/2605830158: RNCC: 6 | RNVC: 9

10 Jul 2000

5340-33-001-1291
Mounting Bracket

330011291
35-52129-0101: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-201-4199
Angle Bracket

332014199
A2811737-402: RNCC: 3 | RNVC: 2

9 Jul 2002

5340-33-102-3926
Bow Handle

331023926
MBL1-2-1100: RNCC: 3 | RNVC: 2
MBL1-2-1100: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-126-6046
Angle Bracket

331266046
C22136-A1000-C97: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-114-4738
Loop Clamp

331144738
F-131 34: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-181-7830
Lever Bracket

331817830
-07700589-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-000-0663
Access Cover

330000663
6.305.0.972.018.5: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-154-0397
Synchro Clamp

331540397
573092: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-204-1351
Support Hook

332041351
250000000: RNCC: 3 | RNVC: 2
VM-GANCHOH: RNCC: 3 | RNVC: 2
PCAMI/RP/5600000000120: RNCC: 5 | RNVC: 1

6 Apr 2005

5340-33-001-9967
Access Cover

330019967
35-25979-0001A01: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-002-5318
Access Cover

330025318
212-11133-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-204-8941
Mounting Bracket

332048941
34950-29F00: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-205-3039
Access Cover

332053039
69200-28C00: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-33-125-7871
Bail Handle

331257871
C22786-T-B7: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-33-200-7688
Access Cover

332007688
J92561395-002: RNCC: 3 | RNVC: 2

8 Mar 2002

5340-33-103-2264
Mechanical Stop

331032264
1055-000164: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-115-8464
Angle Bracket

331158464
H8/225/PH/4/4: RNCC: 3 | RNVC: 2

18 Sep 1992

5340-33-001-0564
Mounting Bracket

330010564
35-46241-0201: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-200-0352
Stand Base

332000352
MAM-TR20-06-05-01: RNCC: 3 | RNVC: 2

26 Sep 2001

5340-33-200-3052
Angle Bracket

332003052
223571407-01: RNCC: 3 | RNVC: 2

12 Dec 2001

5340-33-105-5498
Mounting Bracket

331055498
1005-004220: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-33-001-1086
Mounting Bracket

330011086
35-46782-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-103-1871
Handwheel

331031871
1055-000077: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-9576
Mounting Plate

332029576
223552774-01: RNCC: 3 | RNVC: 2

15 Dec 2003

5340-33-116-3887
Mounting Bracket

331163887
GP-S-170/6: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-9054
Mounting Plate

332029054
223551757-01: RNCC: 3 | RNVC: 2
223551757: RNCC: 5 | RNVC: 1

27 Nov 2003

5340-33-000-1267
Detent Plunger

330001267
1005-000772: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-33-207-5513
Utility Resilient Mount

332075513
V3CA-8100-02NFMJ: RNCC: 3 | RNVC: 2

17 Jun 2009

5340-33-161-2136
Mounting Bracket

331612136
1015-000494: RNCC: 3 | RNVC: 2

21 Sep 1995

5340-33-103-2263
Access Cover

331032263
1055-000163: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-8932
Mounting Bracket

332048932
51530-29F00: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-105-9624
Mending Plate

331059624
A52-01-14: RNCC: 3 | RNVC: 2

18 Sep 1996

5340-33-205-8526
Mounting Bracket

332058526
2885-101: RNCC: 3 | RNVC: 2

20 Apr 2007

5340-33-211-5305
Bow Handle

332115305
EL528-PP-235-SW: RNCC: 3 | RNVC: 2
0711711: RNCC: 5 | RNVC: 2

24 Nov 2013

5340-33-102-1864
Mounting Bracket

331021864
32330000080: RNCC: 3 | RNVC: 2
MCL-3-24: RNCC: 3 | RNVC: 2
32330000080: RNCC: 3 | RNVC: 2
MCL-3-24: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-205-3759
Stand Base

332053759
CS-295-AG1020501: RNCC: 3 | RNVC: 2

6 Sep 2006

5340-33-200-3054
Mounting Plate

332003054
723571421-01: RNCC: 3 | RNVC: 2

12 Dec 2001

5340-33-202-9838
Mounting Bracket

332029838
723552765-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-003-3529
Mechanical Stop

330033529
11.12537-0013: RNCC: 3 | RNVC: 2

26 Jun 1997

5340-33-003-4154
Mounting Bracket

330034154
11.43286-0349: RNCC: 3 | RNVC: 2
11.43286-0349: RNCC: 5 | RNVC: 2

27 Aug 1997

5340-33-001-6499
Access Cover

330016499
35-24064-0001: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-211-5763
Angle Bracket

332115763
CE200330-2501: RNCC: 3 | RNVC: 2

3 Dec 2013

5340-33-190-5716
Mounting Plate

331905716
K43160523-010: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-103-1739
Plug Button

331031739
5930-000471: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-9775
Access Door Hinge

330009775
35-21152-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-202-7966
Mounting Plate

332027966
CS-EF2AG101-01-1: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-33-206-1216
Retaining Strap

332061216
403471: RNCC: 3 | RNVC: 2
403471: RNCC: 5 | RNVC: 2
5340-33-R05-6821: RNCC: 6 | RNVC: 9

23 Aug 2007

5340-33-004-8548
Rod End Clevis

330048548
DIN 71752/G16X32-A3P: RNCC: 3 | RNVC: 2

14 Dec 1999

5340-33-206-0464
Access Cover

332060464
M18-A3791-0001: RNCC: 3 | RNVC: 2

11 Jul 2007

5340-33-106-5267
Doorknob

331065267
A0402020: RNCC: 3 | RNVC: 2
PCAMI/RP/27A0402020: RNCC: 4 | RNVC: 1
010422: RNCC: 5 | RNVC: 1

6 Apr 1998

5340-33-116-0648
Loop Clamp

331160648
AA-13128000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-115-5586
Padlock

331155586
H8/225/PH/20/14/9: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-0807
Cushioning Pad

331030807
2510-000268: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-9332
Butt Hinge

332009332
35-14149-0003-01: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-33-003-6299
Retaining Band

330036299
2510-003441: RNCC: 3 | RNVC: 2

25 May 1998

5340-33-201-9496
Mounting Bracket

332019496
J92563800-401: RNCC: 3 | RNVC: 2

20 Nov 2002

5340-33-106-8070
Plug Button

331068070
M460103-35C: RNCC: 3 | RNVC: 2

31 Mar 1999

5340-33-116-1370
Mounting Plate

331161370
AB-11261100: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-3634
Support Hook

331603634
6101020: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-6460
Turnbuckle

332016460
1025-900496: RNCC: 3 | RNVC: 2

23 Sep 2002

5340-33-001-6474
Block Clamp

330016474
35-43338-0001-00: RNCC: 3 | RNVC: 2
35-43338-0001: RNCC: 5 | RNVC: 2

24 Apr 1990

5340-33-104-7769
Section Block Clamp

331047769
9040-462 A: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-4187
Bumper

330014187
92023200: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-200-5968
Mounting Bracket

332005968
WW 488 139: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-201-1120
Angle Bracket

332011120
2510008658: RNCC: 3 | RNVC: 2

10 May 2002

5340-33-160-6488
Door Handle

331606488
95.605.964: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-9056
Retaining Strap

332009056
5340001637: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-33-202-4781
Handle Grip

332024781
MF-9433011: RNCC: 3 | RNVC: 2

7 Jul 2003

5340-33-200-9368
Snap Hook

332009368
120-0959-04: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-33-001-0312
Loop Clamp

330010312
35-43511-0201: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-0767
Mounting Bracket

330010767
35-46375-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-201-1023
Rod End Clevis

332011023
35-23317-0013A01: RNCC: 3 | RNVC: 2

30 Apr 2002

5340-33-204-7649
Mounting Plate

332047649
5038429: RNCC: 3 | RNVC: 2
1.124.60.006.03-A: RNCC: 5 | RNVC: 2

12 Jan 2006

5340-33-200-9757
Mounting Bracket

332009757
2510008347: RNCC: 3 | RNVC: 2
2510008347: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-157-5440
Mounting Bracket

331575440
615607: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-7059
Mounting Bracket

332027059
9673.290.5060: RNCC: 3 | RNVC: 2
2910900024: RNCC: 5 | RNVC: 2
2910900024: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-202-9125
Mounting Bracket

332029125
1025-901766: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-203-4034
Turnbuckle

332034034
HECR0150054: RNCC: 3 | RNVC: 2

1 Apr 2004

5340-33-204-7970
Threaded Rod End

332047970
PS-910499: RNCC: 3 | RNVC: 2

25 Jan 2006

5340-33-156-2273
Screw Hook

331562273
-76960-G4261: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-4577
Mechanical Stop

332004577
WW 486 862 A: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-33-000-6688
Retaining Strap

330006688
590301: RNCC: 1 | RNVC: 2
590301: RNCC: 3 | RNVC: 2

7 Sep 1988

5340-33-115-9271
Mounting Plate

331159271
01.00725/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-210-9875
Angle Bracket

332109875
INS030245002000000: RNCC: 3 | RNVC: 2

30 Apr 2013

5340-33-103-2573
Lever Bracket

331032573
A-5-27: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-000-4238
Expansion Plug

330004238
3340804571: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-209-8005
Utility Guard Rail Section

332098005
35-21374-0001A01: RNCC: 3 | RNVC: 2

2 Mar 2012

5340-33-155-4517
Retaining Strap

331554517
570212: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-004-5932
Expansion Plug

330045932
559050: RNCC: 3 | RNVC: 2

2 Jul 1999

5340-33-187-5596
Loop Clamp

331875596
0301157-1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-2473
Expansion Plug

330002473
3340802071: RNCC: 1 | RNVC: 2

22 May 1987

5340-33-160-7493
Retaining Clip

331607493
79.10.015.662: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-000-6952
Loop Clamp

330006952
566605: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-157-7124
Access Cover

331577124
312507: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-5557
Angle Bracket

332055557
95-25906-1401: RNCC: 3 | RNVC: 2

15 Dec 2006

5340-33-155-7774
Angle Bracket

331557774
569344: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-000-9716
Angle Bracket

330009716
35-14149-0004: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-190-3506
Access Cover

331903506
3-88550: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-0097
Mounting Bracket

330010097
35-34140-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-155-5177
Loop Clamp

331555177
648909: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-209-4674
Utility Guard Rail Section

332094674
0664.10.8000.00: RNCC: 3 | RNVC: 2

27 Dec 2011

5340-33-107-6318
Mounting Bracket

331076318
323370: RNCC: 3 | RNVC: 2
323370: RNCC: 3 | RNVC: 2

24 Mar 2000

5340-33-001-4137
Expansion Plug

330014137
92022134: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-004-7081
Angle Bracket

330047081
NN60304: RNCC: 1 | RNVC: 2
NN60304G01: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-33-161-2698
Mounting Bracket

331612698
319343: RNCC: 3 | RNVC: 2

27 Apr 1995

5340-33-105-6823
Angle Bracket

331056823
0846067: RNCC: 3 | RNVC: 2

16 Oct 1997

5340-33-155-3194
Vent Plug

331553194
125440.95: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-8536
Angle Bracket

331578536
782541: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-4480
Mounting Bracket

331074480
W280677501502: RNCC: 3 | RNVC: 2

13 Oct 1999

5340-33-201-8971
Mounting Bracket

332018971
100433020010: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-33-004-1912
Stand Base

330041912
730091821: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-107-4108
Mounting Bracket

331074108
449174: RNCC: 3 | RNVC: 2

15 Oct 1999

5340-33-181-8161
Mounting Plate

331818161
-09105232-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-004-5187
Expansion Plug

330045187
6720477IZQ: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-126-9167
Rod End Clevis

331269167
23802579-5: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-106-3110
Access Cover

331063110
2 005 824 881: RNCC: 3 | RNVC: 2

4 Sep 1997

5340-33-116-1592
Mounting Bracket

331161592
3 043 284: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-125-9775
Access Cover

331259775
F30087-K500-C4: RNCC: 3 | RNVC: 2

5 Oct 1995

5340-33-002-1544
Mounting Bracket

330021544
318405: RNCC: 3 | RNVC: 2
318405: RNCC: 3 | RNVC: 2

1 Jul 1993

5340-33-004-5139
Mounting Bracket

330045139
04200351-0: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-005-1058
Access Cover

330051058
95-23502-0001: RNCC: 3 | RNVC: 2

21 Jul 2000

5340-33-200-1937
Retaining Band

332001937
J57166011-001: RNCC: 3 | RNVC: 2

31 Oct 2001

5340-33-003-3485
Rod End Connector

330033485
F-1110-R65: RNCC: 3 | RNVC: 2

24 Jun 1997

5340-33-181-8940
Mechanical Stop

331818940
-16400175-2: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-144-6144
Mending Plate

331446144
G 153659: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-33-116-1518
Mounting Plate

331161518
9.302.1.630.002.4: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-3511
Mounting Plate

330033511
11.99008-0013: RNCC: 3 | RNVC: 2

26 Jun 1997

5340-33-005-0560
Angle Bracket

330050560
NN60125P01: RNCC: 3 | RNVC: 2

13 Jun 2000

5340-33-200-6354
Webbing Strap

332006354
600000001530: RNCC: 3 | RNVC: 2

14 Feb 2002

5340-33-203-0266
Access Cover

332030266
703221360: RNCC: 3 | RNVC: 2

15 Jan 2004

5340-33-202-9965
Angle Bracket

332029965
MHC2120240: RNCC: 3 | RNVC: 2
MHC1120240: RNCC: 5 | RNVC: 2

19 Dec 2003

5340-33-004-1862
Mounting Bracket

330041862
721018010: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-157-9051
Mending Plate

331579051
320547: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-190-5284
Access Cover

331905284
9233.110: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-8218
Webbing Strap

332018218
2590900125: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-200-9872
Mounting Plate

332009872
2510900314: RNCC: 3 | RNVC: 2
2510900314: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-155-7775
Angle Bracket

331557775
641346: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-158-6545
Mounting Bracket

331586545
731404: RNCC: 3 | RNVC: 2
500005789: RNCC: 5 | RNVC: 2
15100160: RNCC: 5 | RNVC: 9

28 Apr 1995

5340-33-001-3241
Compression Cup

330013241
92011602: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-211-1246
Mounting Bracket

332111246
VR01190500: RNCC: 3 | RNVC: 2
VR01190500: RNCC: 3 | RNVC: 2

16 Jun 2013

5340-33-105-7277
Door Handle

331057277
-74460-G2501: RNCC: 3 | RNVC: 2

9 May 1996

5340-33-001-4119
Retaining Strap

330014119
92022114: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-003-6256
Extension Handle

330036256
MGAR 2820: RNCC: 3 | RNVC: 2

25 May 1998

5340-33-001-3564
Runner

330013564
92018104: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-204-8316
Mounting Plate

332048316
DF 413 252 AE: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-33-157-7629
Angle Bracket

331577629
559897: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-206-1365
Retaining Strap

332061365
403211: RNCC: 3 | RNVC: 2
403211: RNCC: 5 | RNVC: 2
5340-33-R02-4444: RNCC: 6 | RNVC: 9

31 Aug 2007

5340-33-005-1923
Angle Bracket

330051923
SP07425: RNCC: 3 | RNVC: 2

28 Dec 2000

5340-33-204-3120
Retaining Strap

332043120
706200304: RNCC: 3 | RNVC: 2

30 Jun 2005

5340-33-201-6117
Mending Plate

332016117
319812: RNCC: 3 | RNVC: 2

9 Sep 2002

5340-33-154-4942
Mounting Bracket

331544942
808033: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-202-7007
Mounting Bracket

332027007
9673.250.8290: RNCC: 3 | RNVC: 2
2540901464: RNCC: 5 | RNVC: 2
2540901464: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-157-9396
Access Cover

331579396
730332: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-126-4036
Metal Grille

331264036
62.040: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-116-6589
Rod End Clevis

331166589
701.011.106: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-0086
Mounting Bracket

330020086
1348AS101: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-33-004-4738
Access Cover

330044738
191956: RNCC: 3 | RNVC: 2

2 Jun 1999

5340-33-180-5654
Access Door Hinge

331805654
159298: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-107-1753
Loop Clamp

331071753
196944: RNCC: 3 | RNVC: 2

1 Jul 1999

5340-33-189-1665
Handwheel

331891665
6123016: RNCC: 3 | RNVC: 2

25 Sep 1995

5340-33-001-3481
Mounting Bracket

330013481
92014820: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-160-3674
Plain Solid Disk

331603674
610602214: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-7872
Mounting Bracket

331067872
7356.292.0138: RNCC: 3 | RNVC: 2
2510010320: RNCC: 5 | RNVC: 2

17 Mar 1999

5340-33-205-3974
Access Cover

332053974
3041613: RNCC: 3 | RNVC: 2

13 Sep 2006

5340-33-105-6936
Access Cover

331056936
1802182: RNCC: 3 | RNVC: 2

21 Sep 1996

5340-33-200-5143
Pipe Hanger

332005143
323767: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-003-6998
Loop Clamp

330036998
4110911425: RNCC: 3 | RNVC: 2
4110911425: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-33-107-0965
Loop Clamp

331070965
143602: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-202-4133
Access Cover

332024133
SM931610: RNCC: 3 | RNVC: 2

19 May 2003

5340-33-201-8301
Mounting Bracket

332018301
9644.251.9090: RNCC: 3 | RNVC: 2
2540900390: RNCC: 5 | RNVC: 2
2540900390: RNCC: 5 | RNVC: 2

28 Oct 2002

5340-33-157-7284
Angle Bracket

331577284
319290: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-189-2244
Mechanical Stop

331892244
0600085: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-116-1515
Access Hole Frame

331161515
6.987.0.753.002.5: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-188-7965
Turnbuckle

331887965
3 170 175: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-105-5758
Handle Grip

331055758
-01902108-0: RNCC: 3 | RNVC: 2

9 May 1996

5340-33-200-3691
Mending Plate

332003691
C 6660 113: RNCC: 3 | RNVC: 2

21 Jan 2002

5340-33-200-7191
Spring Tension Clip

332007191
IN-050A-MV01I.08: RNCC: 3 | RNVC: 2

5 Mar 2002

5340-33-200-1522
Handle Grip

332001522
N-410010: RNCC: 3 | RNVC: 2

16 Oct 2001

5340-33-181-8244
Retaining Strap

331818244
-10100287-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-157-8000
Mending Plate

331578000
683574: RNCC: 3 | RNVC: 2
683574.90: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-188-7519
Loop Clamp

331887519
9.325.1.977.006.4: RNCC: 3 | RNVC: 2

21 Sep 1995

5340-33-203-6869
Utility Access Door

332036869
2123010240-1: RNCC: 3 | RNVC: 2

24 Aug 2004

5340-33-102-1106
Lock-Release Lever

331021106
A-2-17: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-33-115-9280
Mounting Plate

331159280
01.00825/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-9169
Mounting Bracket

331559169
312641: RNCC: 3 | RNVC: 2
312641: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-107-7438
Mounting Plate

331077438
W290684018900: RNCC: 3 | RNVC: 2

25 May 2000

5340-33-204-9588
Handle Grip

332049588
57211-12D00: RNCC: 3 | RNVC: 2

28 Feb 2006

5340-33-202-9842
Mounting Plate

332029842
223553703-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-206-1943
Mechanical Stop

332061943
35-22070-2503A01: RNCC: 3 | RNVC: 2

21 Sep 2007

5340-33-202-9052
Access Cover

332029052
223551751-01: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-201-3999
Angle Bracket

332013999
A2811320-403: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-107-0472
Buckle

331070472
14383: RNCC: 3 | RNVC: 2
PCAMI/RP/1700014383: RNCC: 6 | RNVC: 9

26 May 1999

5340-33-106-1290
Doorknob

331061290
-90670-G9601: RNCC: 3 | RNVC: 2

7 Apr 1997

5340-33-181-1145
Retaining Strap

331811145
-01551-00371: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-102-2452
Runner

331022452
1005-000944: RNCC: 3 | RNVC: 2
WK-W 9033.0104: RNCC: 5 | RNVC: 2

15 Jan 1991

5340-33-161-7028
Padlock

331617028
301/25: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-001-1204
Rod End Clevis

330011204
35-49147-0101: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-145-6436
Loop Clamp

331456436
018092: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-4301
Door Handle

330034301
159-422: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-003-3399
Mounting Bracket

330033399
901776: RNCC: 3 | RNVC: 2

24 Jun 1997

5340-33-145-6438
Loop Clamp

331456438
TAB. C4-6: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-5198
Access Cover

330025198
212-51106-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-126-4204
Angle Bracket

331264204
C22136-N1000-C90: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-206-1922
Access Cover

332061922
PS-912240-004: RNCC: 3 | RNVC: 2

21 Sep 2007

5340-33-115-9707
Mending Plate

331159707
9.987.1.653.001.4: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-181-7311
Pipe Hanger

331817311
-06601401-1: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-204-4052
Snap Hook

332044052
191-120: RNCC: 3 | RNVC: 2
BS-33P025496: RNCC: 5 | RNVC: 2
4030-33-P02-5496: RNCC: 6 | RNVC: 9

12 Sep 2005

5340-33-107-6302
Bumper

331076302
7060.252.0005: RNCC: 3 | RNVC: 2
2510700779: RNCC: 5 | RNVC: 2

18 May 2000

5340-33-116-6588
Rod End Clevis

331166588
541.8.147: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-5038
Loop Clamp

331565038
-46289-03C04: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-4000
Angle Bracket

332014000
A2811370-005: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-157-7790
Angle Bracket

331577790
615876: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-001-1216
Mounting Bracket

330011216
35-49200-0201: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-1297
Mounting Bracket

330011297
35-52238-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-000-1887
Loop Clamp

330001887
3090211049: RNCC: 1 | RNVC: 2
3090211049: RNCC: 3 | RNVC: 2
4730002212: RNCC: 3 | RNVC: 2

10 Dec 1986

5340-33-205-2548
Rod End Clevis

332052548
35-23317-0016: RNCC: 3 | RNVC: 2

6 Jul 2006

5340-33-115-9110
Retaining Clip

331159110
28441-896-000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-1364
Mounting Bracket

330011364
35-53240-1602: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-2298
Rod End Connector

330012298
35-82200-0301: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-107-8698
Door Closer

331078698
PCAMI/RP/27A0010208: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-33-003-7293
Leather Strap

330037293
4791-499: RNCC: 3 | RNVC: 2

5 Jun 1998

5340-33-201-8142
Mounting Plate

332018142
492.090.0061: RNCC: 3 | RNVC: 2
2510701537: RNCC: 5 | RNVC: 2

25 Oct 2002

5340-33-200-4090
Retaining Strap

332004090
Q 314 177 124: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-000-0508
Access Cover

330000508
130GL00110: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-102-0699
Eye Hook

331020699
B-4-3: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-154-9712
Bumper

331549712
64-10: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-103-2650
Bridge Clamp

331032650
1907931002: RNCC: 3 | RNVC: 2
00-706-9545: RNCC: 6 | RNVC: 9

7 Mar 1994

5340-33-106-4092
Mounting Bracket

331064092
8854 107-211: RNCC: 3 | RNVC: 2

12 Dec 1997

5340-33-103-1586
Mounting Bracket

331031586
471-090-0100: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-105-9611
Access Cover

331059611
A52-01-13: RNCC: 3 | RNVC: 2

18 Sep 1996

5340-33-114-3510
Rod End Clevis

331143510
6916-250: RNCC: 3 | RNVC: 2

13 Sep 1995

5340-33-115-8524
Access Cover

331158524
20688: RNCC: 3 | RNVC: 2

18 Sep 1992

5340-33-003-3507
Loop Clamp

330033507
R508-E4X12: RNCC: 3 | RNVC: 2

25 Jun 1997

5340-33-201-5172
Angle Bracket

332015172
MAM-HE-09-01-02: RNCC: 3 | RNVC: 2

9 Aug 2002

5340-33-200-4269
Stand Base

332004269
CLC 02 BAS: RNCC: 3 | RNVC: 2

23 Jan 2002

5340-33-001-9234
Mounting Bracket

330019234
C-18040-1-0-CR-20: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-201-3990
Angle Bracket

332013990
A2811112-003: RNCC: 3 | RNVC: 2

5 Jul 2002

5340-33-003-4033
Mounting Bracket

330034033
11.20343-0210: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-201-2190
Utility Access Door

332012190
A2810589-001: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-204-6498
Loop Clamp

332046498
20102: RNCC: 3 | RNVC: 2

21 Nov 2005

5340-33-108-4447
Webbing Strap

331084447
9644.250.6301: RNCC: 3 | RNVC: 2
2540001220: RNCC: 5 | RNVC: 2
2540001220: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-000-6661
Retaining Strap

330006661
147521: RNCC: 1 | RNVC: 2
5340001099: RNCC: 3 | RNVC: 2
147521: RNCC: 3 | RNVC: 2

6 Sep 1988

5340-33-211-4601
Angle Bracket

332114601
45.30.00.650: RNCC: 3 | RNVC: 2

10 Nov 2013

5340-33-002-4682
Access Cover

330024682
CAN68094-10: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-154-7485
Butt Hinge

331547485
320760: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-000-7015
Loop Clamp

330007015
838819: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-002-0855
Metal Grille

330020855
PER 450C: RNCC: 3 | RNVC: 2

18 Aug 1992

5340-33-157-8381
Angle Bracket

331578381
751494: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-000-7071
Retaining Band

330007071
900469: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-108-1416
Access Cover

331081416
2 0045-208: RNCC: 3 | RNVC: 2

16 Jan 2001

5340-33-115-9745
Access Cover

331159745
9.987.1.780.00.4: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-3447
Mounting Plate

332053447
5032618: RNCC: 3 | RNVC: 2
1.128.33.027: RNCC: 5 | RNVC: 2

17 Aug 2006

5340-33-200-5866
Retaining Strap

332005866
CF 472 853 A: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-155-7449
Mending Plate

331557449
521152: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-157-7245
Angle Bracket

331577245
317960: RNCC: 3 | RNVC: 2
317960: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-0950
Angle Bracket

332040950
2510006284: RNCC: 3 | RNVC: 2

18 Mar 2005

5340-33-108-5443
Mounting Bracket

331085443
0639.250.3180: RNCC: 3 | RNVC: 2
2540000525: RNCC: 5 | RNVC: 2
2540000525: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-203-9976
Access Cover

332039976
999088354: RNCC: 3 | RNVC: 2
999088354: RNCC: 5 | RNVC: 2

31 Jan 2005

5340-33-116-7044
Mending Plate

331167044
50.221.11: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-210-4805
Lock-Release Lever

332104805
212-21177-17-1: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-33-202-4362
Angle Bracket

332024362
433160: RNCC: 3 | RNVC: 2

3 Jun 2003

5340-33-180-6854
Rod End Connector

331806854
233406: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-204-4144
Mounting Bracket

332044144
W290698471300: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-107-2372
Mechanical Stop

331072372
-05700250-0: RNCC: 3 | RNVC: 2

14 Sep 1999

5340-33-004-9987
Access Cover

330049987
7704001718: RNCC: 3 | RNVC: 2

3 May 2000

5340-33-181-0386
Loop Clamp

331810386
-08723-17800: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-155-7763
Angle Bracket

331557763
512601: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-161-2312
Angle Bracket

331612312
315531: RNCC: 3 | RNVC: 2
315531: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-33-205-2694
Bow Handle

332052694
CBD50509P04: RNCC: 3 | RNVC: 2

12 Jul 2006

5340-33-154-5559
Retaining Strap

331545559
900700: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-108-0071
Mounting Bracket

331080071
9644.251.3020: RNCC: 3 | RNVC: 2
2540900502: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-203-9068
Lock-Release Lever

332039068
055-07.M01: RNCC: 3 | RNVC: 2

7 Jan 2005

5340-33-180-7857
Mounting Bracket

331807857
544389: RNCC: 3 | RNVC: 2

25 Jul 1995

5340-33-202-7037
Mounting Bracket

332027037
9673.250.0312: RNCC: 3 | RNVC: 2
2540900512: RNCC: 5 | RNVC: 2
2540900512: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-001-3808
Angle Bracket

330013808
92020141: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-157-7436
Access Cover

331577436
522024: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-5389
Furniture Cup

331065389
C0302081: RNCC: 3 | RNVC: 2
PCAMI/RP/29C0302081: RNCC: 4 | RNVC: 1
030208B: RNCC: 5 | RNVC: 2

8 Apr 1998

5340-33-116-3959
Mounting Bracket

331163959
TO-3702: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-1031
Strapping

330001031
H350GS/D126: RNCC: 1 | RNVC: 2

14 Jul 1986

5340-33-161-5470
Access Cover

331615470
583338: RNCC: 3 | RNVC: 2
583338: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-4318
Mounting Plate

331614318
207174: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-105-8962
Handle Grip

331058962
5340.000257: RNCC: 3 | RNVC: 2

2 Jul 1996

5340-33-103-5118
Retaining Strap

331035118
1301: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-157-8036
Angle Bracket

331578036
698828: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-6497
Loop Clamp

332046497
20113: RNCC: 3 | RNVC: 2

21 Nov 2005

5340-33-203-3375
Mounting Bracket

332033375
4150-559: RNCC: 3 | RNVC: 2

3 Mar 2004

5340-33-203-9994
Access Cover

332039994
A15500005: RNCC: 3 | RNVC: 2
IV33R272234: RNCC: 5 | RNVC: 2

31 Jan 2005

5340-33-203-5001
Angle Bracket

332035001
NN60765P01: RNCC: 3 | RNVC: 2

1 May 2004

5340-33-106-8748
Corner Brace

331068748
7356.592.0026: RNCC: 3 | RNVC: 2
2510009225: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-107-7419
Mounting Bracket

331077419
W290684004400: RNCC: 3 | RNVC: 2

25 May 2000

5340-33-204-4618
Loop Clamp

332044618
NN60805G01: RNCC: 3 | RNVC: 2

16 Sep 2005

5340-33-004-2682
Mounting Plate

330042682
77 00 673 100: RNCC: 3 | RNVC: 2

23 Nov 1998

5340-33-004-6191
Access Cover

330046191
6318150140: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-161-4239
Loop Clamp

331614239
162489: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-157-9377
Mending Plate

331579377
695291: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-33-200-9782
Access Cover

332009782
2510008480: RNCC: 3 | RNVC: 2
2510008480: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-189-1733
Elastic Strap

331891733
02240150: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-115-8181
Access Cover

331158181
14202801381: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-001-3326
Retaining Strap

330013326
92012614: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-201-9483
Angle Bracket

332019483
J92563585-002: RNCC: 3 | RNVC: 2

20 Nov 2002

5340-33-105-0547
Mounting Bracket

331050547
RAL-200-2-3-3: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-200-3413
Loop Clamp

332003413
RM-8/52-57: RNCC: 3 | RNVC: 2
92002205257: RNCC: 5 | RNVC: 2

11 Jan 2002

5340-33-103-2273
Mounting Plate

331032273
2590-000135: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-8398
Access Cover

332028398
J57462225-001: RNCC: 3 | RNVC: 2

10 Nov 2003

5340-33-200-2093
Utility Access Door

332002093
J57166379-001: RNCC: 3 | RNVC: 2

5 Nov 2001

5340-33-005-2411
Self-Locking Insert

330052411
CAN6115M5-14A: RNCC: 3 | RNVC: 2

14 Feb 2001

5340-33-116-0359
T Bracket

331160359
AA-11267000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-3159
Key Blank

331563159
KEY-00-00066: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-116-5782
Mounting Bracket

331165782
16581-ZE0-000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-8547
Rod End Clevis

330048547
DIN 71752/G16X32LH-A3C: RNCC: 3 | RNVC: 2

14 Dec 1999

5340-33-188-8328
Door Closer

331888328
6102036: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-33-105-1112
Leather Strap

331051112
52620006050: RNCC: 3 | RNVC: 2
52620006050: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-208-5311
Utility Resilient Mount

332085311
135253: RNCC: 3 | RNVC: 2
50FAX19800085: RNCC: 5 | RNVC: 2
BRB70-60SH-M12: RNCC: 5 | RNVC: 2

9 Sep 2010

5340-33-004-2861
Case Leg

330042861
PCAMI/RP/0306107017/N: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-161-2310
Angle Bracket

331612310
313090: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-33-154-2233
Mending Plate

331542233
641773: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-107-7799
Block Clamp

331077799
WW 497 871 AU: RNCC: 3 | RNVC: 2

18 May 2000

5340-33-107-0329
Synchro Clamp

331070329
3643809: RNCC: 3 | RNVC: 2

26 Mar 2001

5340-33-107-0853
Rim Lock

331070853
01605005-1: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-001-5533
Retaining Strap

330015533
92041222: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-155-6406
Angle Bracket

331556406
757477: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-200-1666
Retaining Strap

332001666
28110702: RNCC: 3 | RNVC: 2

26 Oct 2001

5340-33-001-4016
Compression Cup

330014016
92021211: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-154-2217
Mending Plate

331542217
551927: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-000-6942
Loop Clamp

330006942
561063: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-202-0467
Access Cover

332020467
1025-900200: RNCC: 3 | RNVC: 2

2 Jan 2003

5340-33-003-6716
Mounting Plate

330036716
2510002854: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-155-7777
Angle Bracket

331557777
750522: RNCC: 3 | RNVC: 2
757941: RNCC: 5 | RNVC: 2

18 Oct 1990

5340-33-001-3287
Compression Cup

330013287
92012125: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-157-7999
Access Cover

331577999
683393: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-8753
Angle Bracket

330048753
NN60298P01: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-33-205-0240
Hinge Torsion Bar

332050240
0405053: RNCC: 3 | RNVC: 2

6 Apr 2006

5340-33-200-0811
Mounting Plate

332000811
7054.252.0468: RNCC: 3 | RNVC: 2
2540700127: RNCC: 5 | RNVC: 2

5 Oct 2001

5340-33-206-1404
Catch Strike

332061404
T130509: RNCC: 3 | RNVC: 2
07HMIR094: RNCC: 5 | RNVC: 2

3 Sep 2007

5340-33-154-6495
Loop Clamp

331546495
3090211011: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-004-7331
Handwheel

330047331
05.06.175.01.02.00: RNCC: 3 | RNVC: 2

30 Sep 1999

5340-33-003-6612
Mounting Bracket

330036612
195828: RNCC: 3 | RNVC: 2
4139339038: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-125-7662
Retaining Strap

331257662
702008003: RNCC: 3 | RNVC: 2

14 Sep 1995

5340-33-157-7705
Angle Bracket

331577705
575415: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-9194
Mounting Bracket

331559194
313969: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-205-9048
Mending Plate

332059048
98153348: RNCC: 3 | RNVC: 2

9 May 2007

5340-33-204-9040
Mounting Plate

332049040
11323-29F00: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-157-8021
Angle Bracket

331578021
697171: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-5340
Loop Clamp

331555340
699408: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-161-5035
Mending Plate

331615035
733550: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-33-204-7814
Webbing Strap

332047814
2016502: RNCC: 3 | RNVC: 2

19 Jan 2006

5340-33-157-7350
Blank Panel

331577350
322742: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-1733
Mounting Bracket

331551733
22,67.01: RNCC: 3 | RNVC: 2

21 Jan 1991

5340-33-154-0401
Synchro Clamp

331540401
768023: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-181-9163
Access Cover

331819163
-24880510: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-204-3768
Mounting Plate

332043768
5031045: RNCC: 3 | RNVC: 2

18 Aug 2005

5340-33-154-5509
Retaining Strap

331545509
313760: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-157-8098
Access Cover

331578098
731483: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-6994
Loop Clamp

330006994
782496: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-105-7299
Flush Bolt

331057299
-82505-Y9500: RNCC: 3 | RNVC: 2

9 May 1996

5340-33-004-5175
Angle Bracket

330045175
622559: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-161-6164
Retaining Strap

331616164
17396: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-205-6465
Mounting Bracket

332056465
1025901927: RNCC: 3 | RNVC: 2
9743.100.0211: RNCC: 5 | RNVC: 2

30 Jan 2007

5340-33-108-2997
Access Cover

331082997
-19240-V7213: RNCC: 3 | RNVC: 2

13 Feb 2001

5340-33-108-2596
Elbow Catch

331082596
9644.251.0890: RNCC: 3 | RNVC: 2
2510010020: RNCC: 5 | RNVC: 2
2510010020: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-203-2689
Access Cover

332032689
9673.250.7420: RNCC: 3 | RNVC: 2
2540900961: RNCC: 5 | RNVC: 2
2540900961: RNCC: 5 | RNVC: 2

19 Feb 2004

5340-33-203-9506
Access Cover

332039506
20880700: RNCC: 3 | RNVC: 2
33R288286: RNCC: 5 | RNVC: 1

27 Jan 2005

5340-33-108-4160
Access Cover

331084160
9644.810.0240: RNCC: 3 | RNVC: 2
1005004612: RNCC: 5 | RNVC: 2
1005004612: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-205-0622
Mounting Plate

332050622
0227435: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-33-209-3096
Mounting Bracket

332093096
INS003002050030000: RNCC: 3 | RNVC: 2

28 Sep 2011

5340-33-200-2646
Mounting Bracket

332002646
100351100001: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-33-209-4433
Utility Guard Rail Section

332094433
0662.20.3003.00: RNCC: 3 | RNVC: 2

21 Dec 2011

5340-33-107-0311
Door Holder

331070311
9051923: RNCC: 3 | RNVC: 2

25 May 1999

5340-33-201-0008
Mounting Bracket

332010008
2510901502: RNCC: 3 | RNVC: 2
2510901502: RNCC: 5 | RNVC: 2

22 Apr 2002

5340-33-001-8481
Expansion Shield

330018481
20050-57AC: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-001-8465
Expansion Shield

330018465
20050-578F: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-106-5704
Mending Plate

331065704
1339052: RNCC: 3 | RNVC: 2
1339052: RNCC: 5 | RNVC: 2

9 Jul 1998

5340-33-201-5774
Angle Bracket

332015774
231013: RNCC: 3 | RNVC: 2

4 Sep 2002

5340-33-204-7296
Access Cover

332047296
800844-SE: RNCC: 3 | RNVC: 2
800844-SE: RNCC: 5 | RNVC: 2

22 Dec 2005

5340-33-200-9022
Mounting Bracket

332009022
3465700071: RNCC: 3 | RNVC: 2

11 Apr 2002

5340-33-000-7503
Angle Bracket

330007503
767118: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-160-7573
Hinge Torsion Bar

331607573
3546.24: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-126-9536
Access Cover

331269536
4203143: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-211-2965
Mounting Bracket

332112965
SP08685: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-33-154-6549
Loop Clamp

331546549
740584: RNCC: 3 | RNVC: 2
740584: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-205-4316
Access Cover

332054316
W290607818000: RNCC: 3 | RNVC: 2

25 Sep 2006

5340-33-003-4264
Pawl Fastener

330034264
167-187: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-001-3236
Retaining Strap

330013236
92011032: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-154-6557
Loop Clamp

331546557
931213: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-116-7570
Access Cover

331167570
647494: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-126-0613
Angle Bracket

331260613
5065-62: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-33-125-6049
Loop Clamp

331256049
W267014170003: RNCC: 3 | RNVC: 2

13 Sep 1995

5340-33-202-6779
Mounting Bracket

332026779
9673.590.5079: RNCC: 3 | RNVC: 2
2510903201: RNCC: 5 | RNVC: 2
2510903201: RNCC: 5 | RNVC: 2

25 Sep 2003

5340-33-181-0181
Corner Brace

331810181
-93624-C6100: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-157-8126
Angle Bracket

331578126
733974: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-9977
Access Cover

332039977
999017668: RNCC: 3 | RNVC: 2
999017668: RNCC: 5 | RNVC: 2

31 Jan 2005

5340-33-200-5698
Mounting Bracket

332005698
SPA80006: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-33-211-1516
Mounting Bracket

332111516
VR01280020: RNCC: 3 | RNVC: 2
VR01280020: RNCC: 3 | RNVC: 2

1 Jul 2013

5340-33-108-1506
Access Cover

331081506
00.27.01.16: RNCC: 3 | RNVC: 2

19 Jan 2001

5340-33-108-1384
Access Cover

331081384
616237: RNCC: 3 | RNVC: 2

28 Dec 2000

5340-33-181-0771
Handle Grip

331810771
-32865-G9603: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-204-4231
Angle Bracket

332044231
W280698493602: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-202-7649
Mounting Plate

332027649
709051505: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-33-205-3172
Retaining Strap

332053172
220173145: RNCC: 3 | RNVC: 2

25 Jul 2006

5340-33-188-8955
Shimmy Damper

331888955
121006: RNCC: 3 | RNVC: 9

24 Jul 1995

5340-33-003-6789
Access Cover

330036789
314200: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-200-0265
Block Clamp

332000265
JN0143GH48: RNCC: 2 | RNVC: 2

25 Sep 2001

5340-33-181-5822
Retaining Strap

331815822
-01201435: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-206-1634
Ball Socket Seat

332061634
0850483001900: RNCC: 3 | RNVC: 2

12 Sep 2007

5340-33-203-9509
Access Cover

332039509
20880703: RNCC: 3 | RNVC: 2
33R288295: RNCC: 5 | RNVC: 1

27 Jan 2005

5340-33-106-1952
Rod End Clevis

331061952
13719: RNCC: 3 | RNVC: 2

24 Oct 1997

5340-33-107-9772
Mounting Plate

331079772
9644.251.5632: RNCC: 3 | RNVC: 2
2590001215: RNCC: 5 | RNVC: 2
2590001215: RNCC: 5 | RNVC: 2

2 Nov 2000

5340-33-001-4769
Angle Bracket

330014769
92026798: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-154-0398
Synchro Clamp

331540398
575687: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-161-2695
Mounting Bracket

331612695
318914: RNCC: 3 | RNVC: 2

27 Apr 1995

5340-33-205-3028
Access Cover

332053028
17661-29F10: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-33-157-8731
Loop Clamp

331578731
815652: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-0844
Rim Lock

331070844
01605144-4: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-105-2423
Mounting Plate

331052423
-10200513-0: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-116-3208
Loop Clamp

331163208
3617.053: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-144-6349
Retaining Strap

331446349
G 27669: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-33-201-6204
Mounting Bracket

332016204
9644.281.5001: RNCC: 3 | RNVC: 2
2520000429: RNCC: 5 | RNVC: 2
2520000429: RNCC: 5 | RNVC: 2

16 Sep 2002

5340-33-211-4960
Latch Bar

332114960
0220134: RNCC: 3 | RNVC: 2

22 Nov 2013

5340-33-000-7064
Retaining Band

330007064
616873: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-157-7255
Blank Panel

331577255
318355: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-189-2307
Turnbuckle

331892307
01060090: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-4287
Loop Clamp

332014287
1025-901296: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-33-200-0779
Mounting Plate

332000779
7054.252.0467: RNCC: 3 | RNVC: 2
2540700126: RNCC: 5 | RNVC: 2

4 Oct 2001

5340-33-180-6794
Angle Bracket

331806794
219709: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-161-2593
Mounting Bracket

331612593
5330001656: RNCC: 3 | RNVC: 2
317293: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-33-003-2829
Retaining Strap

330032829
721022252: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-003-7837
Loop Clamp

330037837
1039577: RNCC: 3 | RNVC: 2

9 Jun 1998

5340-33-189-1940
Door Closer

331891940
02072002: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-202-5250
Angle Bracket

332025250
MHC2120600: RNCC: 3 | RNVC: 2
MHC1120600: RNCC: 5 | RNVC: 2

1 Aug 2003

5340-33-200-1647
Mounting Plate

332001647
28110301: RNCC: 3 | RNVC: 2

26 Oct 2001

5340-33-204-7321
Mounting Plate

332047321
14523009821: RNCC: 3 | RNVC: 2

22 Dec 2005

5340-33-000-6991
Loop Clamp

330006991
782377: RNCC: 1 | RNVC: 2

9 Sep 1988

Load More Results