What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 5 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 5 of 39

5340-33-202-9644
Mounting Bracket

332029644
723551747-01: RNCC: 3 | RNVC: 2
723551747: RNCC: 5 | RNVC: 1

15 Dec 2003

5340-33-181-5020
Loop Clamp

331815020
SS-06-0075G: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-205-9691
Mounting Plate

332059691
M18-A4061-0001: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-33-001-1462
Mounting Bracket

330011462
35-54418-0003: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-201-2636
Retaining Strap

332012636
108-103: RNCC: 3 | RNVC: 2

11 Jun 2002

5340-33-211-6394
Mounting Bracket

332116394
10-11300-0104-52: RNCC: 3 | RNVC: 2

19 Dec 2013

5340-33-145-5640
Mounting Bracket

331455640
14-104: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-001-8027
Access Cover

330018027
35-22827-0003-01: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-200-6059
Loop Clamp

332006059
D520A.11: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-202-9840
Access Cover

332029840
723552768-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-106-1202
Stand Base

331061202
27494300: RNCC: 3 | RNVC: 2
BASE: RNCC: 3 | RNVC: 2
BASE-00-CARS: RNCC: 5 | RNVC: 2
IS/B0012B: RNCC: 6 | RNVC: 9

15 Sep 1997

5340-33-126-0612
Angle Bracket

331260612
0814-04: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-33-001-1245
Pipe Hanger

330011245
35-51017-1101: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-1642
Angle Bracket

330011642
35-61127-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-156-4632
Strap Hinge

331564632
-80420-01C01: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-0571
Mounting Bracket

330010571
35-46244-0004: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-103-0717
Detent Plunger

331030717
1005-001318: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-6415
Bridge Clamp

330016415
D57647-00: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-001-1344
Mounting Bracket

330011344
35-53224-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-3201
Compression Cup

330013201
92010110: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-001-4195
Angle Bracket

330014195
92023210: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-208-5147
Utility Resilient Mount

332085147
5044784: RNCC: 3 | RNVC: 2
1.143.51.010.04: RNCC: 5 | RNVC: 2

4 Aug 2010

5340-33-000-6682
Retaining Strap

330006682
568839: RNCC: 1 | RNVC: 2

7 Sep 1988

5340-33-204-3988
Turnbuckle

332043988
40-1/4-GANCHO-CANCAMO: RNCC: 3 | RNVC: 2
BS-33P024530: RNCC: 5 | RNVC: 2
4030-33-P02-4530: RNCC: 6 | RNVC: 9

8 Sep 2005

5340-33-161-4914
Antipilferage Seal

331614914
116709: RNCC: 3 | RNVC: 2

27 Apr 1995

5340-33-106-5625
Bumper

331065625
02311009-0: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-33-004-7142
Access Cover

330047142
194128: RNCC: 3 | RNVC: 2

13 Sep 1999

5340-33-107-1944
Hinged Hasp

331071944
793418: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-188-9329
Expansion Plug

331889329
43700007: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-33-204-8089
Handwheel

332048089
39288-7: RNCC: 3 | RNVC: 2
33M001216: RNCC: 6 | RNVC: 9

1 Feb 2006

5340-33-107-7104
Loop Clamp

331077104
0301712-1: RNCC: 3 | RNVC: 2

17 Apr 2000

5340-33-107-1764
Loop Clamp

331071764
4730002332: RNCC: 3 | RNVC: 2
DIN 3016 D1 18 18 18X15 W1 2: RNCC: 4 | RNVC: 1

1 Jul 1999

5340-33-005-3806
Loop Clamp

330053806
TECPBRIDA: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-33-000-6660
Retaining Strap

330006660
146838: RNCC: 1 | RNVC: 2

6 Sep 1988

5340-33-203-9800
Lock Spindle

332039800
PCAMI/RP/27A0501030: RNCC: 3 | RNVC: 2

31 Jan 2005

5340-33-103-1580
Mounting Bracket

331031580
1005-004409: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-7815
Rod Retainer Clip

331077815
-65625-01J00: RNCC: 3 | RNVC: 2

18 May 2000

5340-33-181-8232
Retaining Strap

331818232
-10100217-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-3957
Retaining Strap

330013957
92020603: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-000-9686
Access Cover

330009686
35-13325-0601: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-154-4932
Mounting Bracket

331544932
582669: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-126-2584
Angle Bracket

331262584
8506.007: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-5148
Retaining Strap

331035148
1443-12-13: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-001-1564
Mounting Bracket

330011564
35-56243-0003: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-0880
Mounting Bracket

330010880
35-46541-0401: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-202-7705
Mounting Plate

332027705
INS0470/0083: RNCC: 3 | RNVC: 2

20 Oct 2003

5340-33-206-1630
Mounting Bracket

332061630
4933900105: RNCC: 3 | RNVC: 2
9682.101.4500/710: RNCC: 5 | RNVC: 2

12 Sep 2007

5340-33-205-7048
Turnbuckle

332057048
45-3/4 GANCHO: RNCC: 3 | RNVC: 2
BS-33P427963: RNCC: 5 | RNVC: 2
4030-33-P42-7963: RNCC: 6 | RNVC: 9

27 Feb 2007

5340-33-209-3089
Door Handle

332093089
DH 12-00/18-8: RNCC: 3 | RNVC: 2
C 3768 194 X: RNCC: 5 | RNVC: 2

27 Sep 2011

5340-33-105-0480
Mechanical Stop

331050480
REM-25-2-2-20: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-001-0816
Mounting Bracket

330010816
35-46439-0002: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-116-3979
Mounting Bracket

331163979
0-78-2-03-1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-5450
Mounting Bracket

332035450
INS0312/0001: RNCC: 3 | RNVC: 2

21 May 2004

5340-33-103-1285
Mounting Plate

331031285
375.090.0030: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-4295
Runner

332044295
INS7027/002: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-204-6778
Angle Bracket

332046778
PS-610166: RNCC: 3 | RNVC: 2

30 Nov 2005

5340-33-206-4277
Butt Hinge

332064277
10-61220-0501: RNCC: 3 | RNVC: 2

9 Jan 2008

5340-33-204-3991
Turnbuckle

332043991
44-3/8-CANCAMO-REDONDO-HORQUILLA: RNCC: 3 | RNVC: 2
BS-33P024698: RNCC: 5 | RNVC: 2
4030-33-P02-4698: RNCC: 6 | RNVC: 9

8 Sep 2005

5340-33-000-9799
Mounting Bracket

330009799
35-21215-1201: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-102-4017
Mounting Plate

331024017
MDL5-200-700: RNCC: 3 | RNVC: 2
MDL5-200-710: RNCC: 3 | RNVC: 2
42610004070: RNCC: 3 | RNVC: 2
42610004070: RNCC: 3 | RNVC: 2
MDL5-200-710: RNCC: 3 | RNVC: 2
MDL5-200-700: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-4371
Bail Handle

332014371
223591114-01: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-33-103-2227
Mounting Plate

331032227
1055-000011: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-3490
Mounting Plate

332043490
PS-810000: RNCC: 3 | RNVC: 2

19 Jul 2005

5340-33-001-1506
Mounting Bracket

330011506
35-56156-0101: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-126-4209
Angle Bracket

331264209
C22156-N1000-C15: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-000-9849
Mounting Bracket

330009849
35-22059-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-2614
Mounting Bracket

330012614
CAN64003-2.38: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-33-203-6891
Handwheel

332036891
CBD66526P12: RNCC: 3 | RNVC: 2

24 Aug 2004

5340-33-200-6886
Mending Plate

332006886
SICT040100: RNCC: 3 | RNVC: 2

22 Feb 2002

5340-33-161-1354
Mounting Plate

331611354
7213.96: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-9545
Mounting Plate

332019545
223591738-01: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-33-116-3885
Mounting Bracket

331163885
GP-2057300: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-2752
Track Stop

331072752
PCAMI/RP/38E0000040: RNCC: 3 | RNVC: 2

21 Sep 1999

5340-33-202-6496
Access Cover

332026496
222422514-01: RNCC: 3 | RNVC: 2

22 Sep 2003

5340-33-001-0054
Mounting Bracket

330010054
35-32345-0102: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-201-9493
Mounting Bracket

332019493
J92661140-403: RNCC: 3 | RNVC: 2

20 Nov 2002

5340-33-106-8173
Corner Brace

331068173
311843: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-180-5536
Support Hook

331805536
138215: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-003-2844
Track Stop

330032844
721024104: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-004-1885
Angle Bracket

330041885
730091125: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-102-1823
Access Cover

331021823
52530000420: RNCC: 3 | RNVC: 2
MCL-5-42: RNCC: 3 | RNVC: 2
52530000420: RNCC: 3 | RNVC: 2
MCL-5-42: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-001-1967
Mounting Bracket

330011967
35-66549-1101: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-000-1737
Leather Strap

330001737
1005001195: RNCC: 1 | RNVC: 2
1005-001195: RNCC: 3 | RNVC: 2

1 Dec 1986

5340-33-160-0647
Retaining Strap

331600647
00.431.895.41: RNCC: 3 | RNVC: 2

21 Sep 1995

5340-33-003-7533
Access Door Hinge

330037533
7702146954: RNCC: 3 | RNVC: 2

5 Jun 1998

5340-33-203-2758
Mounting Bracket

332032758
9673.250.1680: RNCC: 3 | RNVC: 2
1005900476: RNCC: 5 | RNVC: 2
1005900476: RNCC: 5 | RNVC: 2

19 Feb 2004

5340-33-108-2410
Mounting Bracket

331082410
9644.250.0412: RNCC: 3 | RNVC: 2
2510006803: RNCC: 5 | RNVC: 2
2510006803: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-108-4466
Mounting Plate

331084466
9644.251.7020: RNCC: 3 | RNVC: 2
2540001449: RNCC: 5 | RNVC: 2
2540001449: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-204-6686
Access Cover

332046686
5037123: RNCC: 3 | RNVC: 2

28 Nov 2005

5340-33-102-5760
Mounting Bracket

331025760
9358-03-20: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-8094
Mounting Bracket

332038094
10-43257-0101: RNCC: 3 | RNVC: 2

29 Oct 2004

5340-33-001-0931
Mounting Bracket

330010931
35-46641-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-000-7016
Loop Clamp

330007016
838820: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-145-5677
Mounting Bracket

331455677
87-348: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-7001
Loop Clamp

330007001
802243: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-002-8974
Clamping Catch

330028974
1238604969: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-000-6696
Retaining Strap

330006696
643145: RNCC: 1 | RNVC: 2

7 Sep 1988

5340-33-200-3150
Mounting Bracket

332003150
28170105: RNCC: 3 | RNVC: 2

14 Dec 2001

5340-33-103-1123
Angle Bracket

331031123
375.093.3017: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-2619
Angle Bracket

331612619
319356: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-33-004-5143
Mounting Bracket

330045143
0684028: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-154-4162
Loop Clamp

331544162
3090223849: RNCC: 3 | RNVC: 2
3090223849: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-203-2690
Access Cover

332032690
9673.250.7430: RNCC: 3 | RNVC: 2
2540900962: RNCC: 5 | RNVC: 2
2540900962: RNCC: 5 | RNVC: 2

19 Feb 2004

5340-33-155-7701
Angle Bracket

331557701
694597: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-001-2772
Loop Clamp

330012772
CAN67282D5M: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-190-2312
Mounting Bracket

331902312
1254: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-153-9692
Door Handle

331539692
883400: RNCC: 3 | RNVC: 2

4 Jan 1990

5340-33-103-5117
Retaining Strap

331035117
1300: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-155-9018
Access Cover

331559018
584578: RNCC: 3 | RNVC: 2
584578: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-200-8631
Access Cover

332008631
35-13328-0201E01: RNCC: 3 | RNVC: 2

5 Apr 2002

5340-33-154-2216
Mending Plate

331542216
522373: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-203-8289
Mounting Bracket

332038289
00141007: RNCC: 3 | RNVC: 2

18 Nov 2004

5340-33-201-6034
Webbing Strap

332016034
2510901304: RNCC: 3 | RNVC: 2

5 Sep 2002

5340-33-204-3116
Loop Clamp

332043116
706200018: RNCC: 3 | RNVC: 2

30 Jun 2005

5340-33-155-7778
Angle Bracket

331557778
690482: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-206-2907
Catch Strike

332062907
PR0009: RNCC: 3 | RNVC: 2

25 Oct 2007

5340-33-102-3117
Mounting Bracket

331023117
54: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-33-108-2346
Access Cover

331082346
0640.120.0128: RNCC: 3 | RNVC: 2
2510005125: RNCC: 5 | RNVC: 2
2510005125: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-204-0315
Detent Plunger

332040315
9502.103.8161: RNCC: 3 | RNVC: 2
1010900147: RNCC: 5 | RNVC: 2

7 Feb 2005

5340-33-156-5001
Loop Clamp

331565001
-25052-C6001: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-166-0429
Access Cover

331660429
BW-65: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-9495
Mounting Bracket

332019495
A2811740-401: RNCC: 3 | RNVC: 2

20 Nov 2002

5340-33-209-4151
Utility Guard Rail Section

332094151
0661.10.7500: RNCC: 3 | RNVC: 2

5 Dec 2011

5340-33-108-4451
Webbing Strap

331084451
9644.250.6304: RNCC: 3 | RNVC: 2
2540001230: RNCC: 5 | RNVC: 2
2540001230: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-107-1825
Door Handle

331071825
6318150236: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-108-0147
Mounting Bracket

331080147
0639.250.7860: RNCC: 3 | RNVC: 2
2540000716: RNCC: 5 | RNVC: 2
2540000716: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-108-5577
Retaining Band

331085577
9644.290.5036: RNCC: 3 | RNVC: 2
2910000289: RNCC: 5 | RNVC: 2
2910000289: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-202-6530
Access Cover

332026530
223551397-01: RNCC: 3 | RNVC: 2
223551397-01: RNCC: 5 | RNVC: 2

22 Sep 2003

5340-33-201-1001
Mechanical Stop

332011001
35-42327-0004: RNCC: 3 | RNVC: 2

30 Apr 2002

5340-33-202-9864
Access Cover

332029864
223551814-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-200-1555
Pipe Hanger

332001555
95-46386-0001A01: RNCC: 3 | RNVC: 2

25 Oct 2001

5340-33-107-4947
Mounting Bracket

331074947
W290684782600: RNCC: 3 | RNVC: 2

1 Dec 1999

5340-33-107-1745
Loop Clamp

331071745
196941: RNCC: 3 | RNVC: 2

1 Jul 1999

5340-33-161-2770
Access Cover

331612770
1425620455: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-107-4134
Mounting Bracket

331074134
7062.252.0330: RNCC: 3 | RNVC: 2
2510700479: RNCC: 5 | RNVC: 2

15 Oct 1999

5340-33-201-8039
Angle Bracket

332018039
319789: RNCC: 3 | RNVC: 2

25 Oct 2002

5340-33-108-2332
Mounting Plate

331082332
0640.120.0150: RNCC: 3 | RNVC: 2
2510004595: RNCC: 5 | RNVC: 2
2510004595: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-106-6044
Pipe Hanger

331066044
2930000522: RNCC: 3 | RNVC: 2

4 Sep 1998

5340-33-189-2268
Mounting Bracket

331892268
01060063: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-107-9987
Mounting Plate

331079987
9644.251.5117: RNCC: 3 | RNVC: 2
2510009893: RNCC: 5 | RNVC: 2
2510009893: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-116-8392
Retaining Clip

331168392
LW: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-200-9079
Mounting Plate

332009079
2540902095: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-33-200-4816
Rim Latch Set

332004816
AF44063+AF44064: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-33-106-9403
Mounting Plate

331069403
196258: RNCC: 3 | RNVC: 2

7 Apr 1999

5340-33-189-1776
Access Cover

331891776
02110030: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-211-4056
Mounting Bracket

332114056
10-25048-0002: RNCC: 3 | RNVC: 2

21 Oct 2013

5340-33-200-6046
Access Cover

332006046
D510A.01: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-160-6017
Mounting Bracket

331606017
93.502.167: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-3868
Mechanical Stop

331613868
643056: RNCC: 3 | RNVC: 2
26100012: RNCC: 5 | RNVC: 9

11 Jul 1995

5340-33-211-5137
Mounting Plate

332115137
1221314: RNCC: 3 | RNVC: 2

23 Nov 2013

5340-33-106-7400
Stand Base

331067400
2510.003418: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-200-2692
Metal Grille

332002692
100402120000: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-33-116-1377
Mounting Plate

331161377
BJ-11218070: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-0095
Buckle

330000095
1005-000422: RNCC: 3 | RNVC: 2

15 Jul 1985

5340-33-201-9540
Mounting Plate

332019540
223591703-02: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-33-202-9944
Mounting Bracket

332029944
223552782-02: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-001-0469
Mounting Bracket

330010469
35-46136-0201: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-116-8648
Mounting Plate

331168648
598/1-30: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-8093
Mounting Bracket

332038093
10-51101-0401: RNCC: 3 | RNVC: 2

29 Oct 2004

5340-33-155-6279
Access Cover

331556279
900052: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-200-1257
Retaining Clip

332001257
324126: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-204-6417
Retaining Strap

332046417
0850483001300: RNCC: 3 | RNVC: 2

17 Nov 2005

5340-33-155-7694
Angle Bracket

331557694
766385: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-157-9023
Mending Plate

331579023
319360: RNCC: 3 | RNVC: 2
319360: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-9962
Angle Bracket

332029962
MHC2120210: RNCC: 3 | RNVC: 2
MHC1120210: RNCC: 5 | RNVC: 2

19 Dec 2003

5340-33-202-0552
Handle Grip

332020552
1025-901831: RNCC: 3 | RNVC: 2

2 Jan 2003

5340-33-155-7748
Angle Bracket

331557748
630853: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-126-9165
Handwheel

331269165
9VVDF00V: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-000-6710
Retaining Strap

330006710
770747: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-201-0224
Mounting Bracket

332010224
2930900055: RNCC: 3 | RNVC: 2
2930900055: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-200-0772
Angle Bracket

332000772
7054.252.0435: RNCC: 3 | RNVC: 2
2540700118: RNCC: 5 | RNVC: 2

4 Oct 2001

5340-33-200-8260
Retaining Strap

332008260
7356.101.0020: RNCC: 3 | RNVC: 2
1055700017: RNCC: 5 | RNVC: 2

18 Mar 2002

5340-33-200-1227
Mounting Bracket

332001227
324123: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-126-0614
Angle Bracket

331260614
5065-63: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-33-206-1332
Mounting Bracket

332061332
583839: RNCC: 3 | RNVC: 2

31 Aug 2007

5340-33-206-2918
Synchro Clamp

332062918
PCMSABMR103: RNCC: 3 | RNVC: 2

26 Oct 2007

5340-33-202-7082
Mounting Bracket

332027082
9673.250.6840: RNCC: 3 | RNVC: 2
2540900868: RNCC: 5 | RNVC: 2
2540900868: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-161-7021
Padlock

331617021
300/25: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-001-1005
Mounting Bracket

330011005
35-46691-0401: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-201-4774
Access Cover

332014774
J52464021-002: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-002-1902
Buckle

330021902
1005-002430: RNCC: 3 | RNVC: 2

23 Jul 1993

5340-33-002-1220
Turnbuckle Body

330021220
2530-000186: RNCC: 3 | RNVC: 2

8 Jun 1993

5340-33-202-2593
Butt Hinge

332022593
35-14147-0003-01: RNCC: 3 | RNVC: 2

14 Mar 2003

5340-33-211-5024
Angle Bracket

332115024
J29165231-001: RNCC: 3 | RNVC: 2

22 Nov 2013

5340-33-166-0303
Angle Bracket

331660303
5.018-580.0: RNCC: 3 | RNVC: 2
5.018-580.0-MEISA: RNCC: 5 | RNVC: 2

20 Jul 1995

5340-33-102-0213
Rod End Connector

331020213
2510-000161: RNCC: 3 | RNVC: 2
411.097.7627: RNCC: 5 | RNVC: 2

6 Aug 1992

5340-33-001-0768
Mounting Bracket

330010768
35-46375-0102: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-000-1741
Buckle

330001741
1005-001199: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-33-001-1874
Mounting Bracket

330011874
35-63686-0003: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-125-8511
Access Cover

331258511
150-0328: RNCC: 3 | RNVC: 2

13 Sep 1995

5340-33-001-6414
Bridge Clamp

330016414
D57646-00: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-201-4780
Access Cover

332014780
J52464031-002: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-107-1452
Latch Bar

331071452
PCAMI/RP/0306101121: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-33-001-0043
Mounting Bracket

330010043
35-32342-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-000-6306
Loop Clamp

330006306
554268: RNCC: 1 | RNVC: 2

14 Jun 1988

5340-33-104-0020
Mechanical Stop

331040020
566030: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-33-211-3944
Mounting Bracket

332113944
0738001520: RNCC: 3 | RNVC: 2

16 Oct 2013

5340-33-103-3937
Loop Clamp

331033937
320019: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-2676
Access Cover

332002676
100402070200: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-33-206-4334
Access Cover

332064334
5006580: RNCC: 3 | RNVC: 2

14 Jan 2008

5340-33-107-9293
Mounting Bracket

331079293
7057.252.0490: RNCC: 3 | RNVC: 2
2510700184: RNCC: 5 | RNVC: 2

26 Sep 2000

5340-33-004-8950
Section Block Clamp

330048950
NN58387G01: RNCC: 3 | RNVC: 2

28 Jan 2000

5340-33-211-5671
Loop Clamp

332115671
EN4114S19NH0: RNCC: 2 | RNVC: 2

1 Dec 2013

5340-33-189-1666
Handwheel

331891666
6126007: RNCC: 3 | RNVC: 2

25 Sep 1995

5340-33-001-0002
Mending Plate

330010002
35-31279-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-1235
Mounting Bracket

330011235
35-49935-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-103-1058
Mounting Plate

331031058
411.090.1511: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-5054
Angle Bracket

330035054
0648636: RNCC: 3 | RNVC: 2

13 Nov 1997

5340-33-157-0228
Access Cover

331570228
-89411-Y9500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-6715
Friction Catch

330036715
2510002839: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-200-1067
Angle Bracket

332001067
7063.252.0240: RNCC: 3 | RNVC: 2
2510701193: RNCC: 5 | RNVC: 2

8 Oct 2001

5340-33-154-0565
Mending Plate

331540565
806708: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-201-9554
Access Cover

332019554
723591775-01: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-33-200-2481
Clamping Catch

332002481
22426515: RNCC: 3 | RNVC: 2

19 Nov 2001

5340-33-201-8162
Angle Bracket

332018162
319792: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-201-7303
Loop Clamp

332017303
EN4114F25NH1: RNCC: 2 | RNVC: 2

15 Oct 2002

5340-33-157-7401
Angle Bracket

331577401
512737: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-2348
Handle Grip

331162348
3021B.00020: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-7331
Access Cover

331067331
AM12030300: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-205-3724
Mechanical Stop

332053724
612: RNCC: 3 | RNVC: 2

6 Sep 2006

5340-33-204-7305
Track Stop

332047305
2510003411: RNCC: 3 | RNVC: 2

22 Dec 2005

5340-33-180-5612
Hasp Staple

331805612
155147: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-116-8496
Angle Bracket

331168496
598/14-2-2: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-3812
Door Closer

331603812
95.630.558: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-0642
Webbing Strap

332040642
OEWCGGVEO000300: RNCC: 3 | RNVC: 2

3 Mar 2005

5340-33-106-8858
Angle Bracket

331068858
318775: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-108-0138
Mounting Bracket

331080138
9644.250.9110: RNCC: 3 | RNVC: 2
2530000955: RNCC: 5 | RNVC: 2
2530000955: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-106-7245
Mounting Bracket

331067245
4PP3527-5153P001: RNCC: 3 | RNVC: 2

22 Mar 1999

5340-33-108-0602
Access Cover

331080602
7011.101.0210: RNCC: 3 | RNVC: 2
2510700317: RNCC: 5 | RNVC: 2

4 Dec 2000

5340-33-202-0753
Bow Handle

332020753
L3138.10.22: RNCC: 3 | RNVC: 2

3 Jan 2003

5340-33-202-7053
Mechanical Stop

332027053
9673.250.0319: RNCC: 3 | RNVC: 2
2510901303: RNCC: 5 | RNVC: 2
2510901303: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-107-9730
Angle Bracket

331079730
9644.250.5998: RNCC: 3 | RNVC: 2
2510009321: RNCC: 5 | RNVC: 2
2510009321: RNCC: 5 | RNVC: 2

2 Nov 2000

5340-33-200-5600
Mounting Bracket

332005600
547130: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-33-154-2247
Mending Plate

331542247
763198: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-156-2190
Angle Bracket

331562190
-20624-Y9502: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-157-7261
Access Cover

331577261
318626: RNCC: 3 | RNVC: 2
318626: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-2832
Loop Clamp

330012832
CAN67370A600: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-103-0964
Mounting Bracket

331030964
411.091.0707: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-1517
Angle Bracket

332111517
VR01280030: RNCC: 3 | RNVC: 2
VR01280030: RNCC: 3 | RNVC: 2

1 Jul 2013

5340-33-201-2283
Doorstop

332012283
2736.02.15: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-180-7448
Access Cover

331807448
346857: RNCC: 3 | RNVC: 2

25 Jul 1995

5340-33-003-7752
Lock Key

330037752
LT8: RNCC: 3 | RNVC: 2

5 Jun 1998

5340-33-106-5298
Handle Grip

331065298
577111: RNCC: 3 | RNVC: 2

6 Apr 1998

5340-33-161-1351
Mounting Plate

331611351
93.502.166.80: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-155-3787
Loop Clamp

331553787
4730000425: RNCC: 3 | RNVC: 2
3090216849: RNCC: 3 | RNVC: 2
3090216849: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-190-3952
Mounting Bracket

331903952
1818: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-202-6652
Mounting Bracket

332026652
9673.250.0880: RNCC: 3 | RNVC: 2
1005900184: RNCC: 5 | RNVC: 2
1005900184: RNCC: 5 | RNVC: 2

24 Sep 2003

5340-33-200-2629
Metal Grille

332002629
100302150000: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-33-205-9817
Retaining Strap

332059817
0840082000600: RNCC: 3 | RNVC: 2

8 Jun 2007

5340-33-200-2642
Utility Access Door

332002642
100341040003: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-33-200-8518
Mounting Plate

332008518
9644.250.5056: RNCC: 3 | RNVC: 2
2530000780: RNCC: 5 | RNVC: 2
2530000780: RNCC: 5 | RNVC: 2

5 Apr 2002

5340-33-200-1212
Mounting Bracket

332001212
323707: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-203-5611
Utility Access Door

332035611
80010101: RNCC: 3 | RNVC: 2

25 May 2004

5340-33-203-4998
Angle Bracket

332034998
NN60601P01: RNCC: 3 | RNVC: 2

1 May 2004

5340-33-156-5003
Loop Clamp

331565003
-20652-Y9500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-1376
Loop Clamp

332021376
EN4114F15NH1: RNCC: 2 | RNVC: 2

28 Jan 2003

5340-33-005-4041
Angle Bracket

330054041
203530301: RNCC: 3 | RNVC: 2

17 Jul 2001

5340-33-107-7002
Angle Bracket

331077002
781463: RNCC: 3 | RNVC: 2

17 Apr 2000

5340-33-004-8244
Mounting Bracket

330048244
NN60483P01: RNCC: 3 | RNVC: 2

22 Nov 1999

5340-33-116-8333
Mounting Bracket

331168333
22 513: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-190-5282
Access Cover

331905282
9207.110: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-107-2851
Expansion Plug

331072851
121014: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-33-204-3400
Webbing Strap

332043400
2.061-A: RNCC: 3 | RNVC: 2

7 Jul 2005

5340-33-205-4013
Mounting Plate

332054013
5039782: RNCC: 3 | RNVC: 2
1.143.60.923: RNCC: 5 | RNVC: 2

14 Sep 2006

5340-33-001-6095
Retaining Strap

330016095
HD-1300-RAYAL-7: RNCC: 3 | RNVC: 2

15 Nov 1989

5340-33-107-1949
Hinged Hasp

331071949
60178002: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-181-2922
Mounting Plate

331812922
-10200529-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-115-8134
Access Cover

331158134
92290228788: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-108-5626
Catch Strike

331085626
0639.250.3136: RNCC: 3 | RNVC: 2
5340001518: RNCC: 5 | RNVC: 2
5340001518: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-201-6121
Door Holder

332016121
320144: RNCC: 3 | RNVC: 2

9 Sep 2002

5340-33-202-3540
Mounting Bracket

332023540
W290699613500: RNCC: 3 | RNVC: 2

21 Apr 2003

5340-33-203-6488
Support Hook

332036488
DF 410 409 AR: RNCC: 3 | RNVC: 2

20 Jul 2004

5340-33-108-5424
T Bracket

331085424
9644.471.5020: RNCC: 3 | RNVC: 2
2510901231: RNCC: 5 | RNVC: 2
2510901231: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-108-4432
Mounting Bracket

331084432
9644.250.8170: RNCC: 3 | RNVC: 2
2540001045: RNCC: 5 | RNVC: 2
2540001045: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-107-4186
Access Cover

331074186
7060.252.0073: RNCC: 3 | RNVC: 2
2510700248: RNCC: 5 | RNVC: 2

15 Oct 1999

5340-33-203-5518
Access Cover

332035518
80060008: RNCC: 3 | RNVC: 2

25 May 2004

5340-33-155-7448
Mending Plate

331557448
513010: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-108-5310
Mounting Bracket

331085310
9644.811.0360: RNCC: 3 | RNVC: 2
1005006421: RNCC: 5 | RNVC: 2
1005006421: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-160-6337
Mounting Bracket

331606337
5.503.370: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-102-1859
Mounting Bracket

331021859
42630004010: RNCC: 3 | RNVC: 2
MC51-8-1: RNCC: 3 | RNVC: 2
42630004010: RNCC: 3 | RNVC: 2
MC51-8-1: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-126-2327
Loop Clamp

331262327
H11930/4: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-33-001-3878
Bumper

330013878
92020255: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-211-2981
Access Cover

332112981
5055935: RNCC: 3 | RNVC: 2
1.164.02.016: RNCC: 5 | RNVC: 2

13 Aug 2013

5340-33-204-8315
Mounting Plate

332048315
DF 305 487 A: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-33-002-7096
Buckle

330027096
0004023: RNCC: 3 | RNVC: 2
NG0004023: RNCC: 3 | RNVC: 2

26 Jul 1995

5340-33-205-8796
Mounting Bracket

332058796
79902081-0: RNCC: 3 | RNVC: 2
993403: RNCC: 5 | RNVC: 2

30 Apr 2007

5340-33-157-8558
Angle Bracket

331578558
785284: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-209-2033
Utility Resilient Mount

332092033
134012: RNCC: 3 | RNVC: 2
DSD100: RNCC: 5 | RNVC: 2

20 Jul 2011

5340-33-187-5531
Loop Clamp

331875531
0201404-1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-2349
Angle Bracket

331562349
-62522-G9651: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-202-9346
Cushioning Pad

332029346
CBD50507P14: RNCC: 3 | RNVC: 2

1 Dec 2003

5340-33-157-7791
Angle Bracket

331577791
615958: RNCC: 3 | RNVC: 2
615958: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-158-1579
Access Cover

331581579
731344: RNCC: 3 | RNVC: 2

31 Oct 1996

5340-33-187-5533
Loop Clamp

331875533
0201406-8: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-6703
Mending Plate

331616703
975-C-3: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-000-9751
Access Cover

330009751
35-21064-0002: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-116-8091
Rod End Clevis

331168091
01.00570/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-0172
Pipe Hanger

331560172
-77300036-1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-8619
Angle Bracket

331078619
165009: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-33-001-5394
Hinged Hasp

330015394
92040413: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-204-4540
Cushioning Pad

332044540
720124510: RNCC: 3 | RNVC: 2

15 Sep 2005

5340-33-189-1732
Elastic Strap

331891732
02240130: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-126-3232
Access Cover

331263232
6.302.0.986.004.5: RNCC: 3 | RNVC: 2

3 Nov 1992

5340-33-156-4994
Loop Clamp

331564994
SS-06-0226A: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-7015
Padlock

331617015
400/60: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-160-3787
Plug Button

331603787
97.506.112: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-7678
Door Handle

330047678
-01605025-1: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-33-108-1415
Access Cover

331081415
2 0045-200: RNCC: 3 | RNVC: 2

16 Jan 2001

5340-33-108-4872
Webbing Strap

331084872
9644.250.0891: RNCC: 3 | RNVC: 2
1005006126: RNCC: 5 | RNVC: 2

23 Mar 2001

5340-33-200-4410
Mounting Bracket

332004410
WW 223 336 CR: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-154-0460
Expansion Plug

331540460
810232: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-126-9070
Access Cover

331269070
23401018-3: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-145-6433
Loop Clamp

331456433
TAB. C9-8: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-0660
Access Cover

330000660
6.302.0.780.033.4: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-161-1357
Catch Strike

331611357
05.215.006.93: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-106-0164
Locking Stay

331060164
159260: RNCC: 3 | RNVC: 2

16 Nov 1996

5340-33-205-2103
Mounting Bracket

332052103
CBD50509P20: RNCC: 3 | RNVC: 2

19 Jun 2006

5340-33-003-0462
Door Handle

330030462
7701348849: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-200-5601
Mounting Bracket

332005601
547131: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-33-145-5284
Access Cover

331455284
83-028: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-4652
Mounting Bracket

331614652
2510-003664: RNCC: 3 | RNVC: 2

27 Apr 1995

5340-33-102-1518
Mounting Bracket

331021518
B-3-20C: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-001-3797
Expansion Plug

330013797
92020124: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-154-4946
Mounting Bracket

331544946
818652: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-108-2381
Mounting Plate

331082381
9644.120.0022: RNCC: 3 | RNVC: 2
2510006261: RNCC: 5 | RNVC: 2
2510006261: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-200-7958
Mounting Plate

332007958
320236: RNCC: 3 | RNVC: 2

12 Mar 2002

5340-33-204-7185
Mounting Bracket

332047185
PS-912033: RNCC: 3 | RNVC: 2
PS-911667: RNCC: 5 | RNVC: 2

16 Dec 2005

5340-33-000-8697
Bow Handle

330008697
T-057045-27: RNCC: 3 | RNVC: 2

10 Feb 1989

5340-33-102-3171
Bumper

331023171
61-2: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-33-189-2304
Bail Handle

331892304
01600060: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-001-5024
Angle Bracket

330015024
92027719: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-188-9830
Rod End Clevis

331889830
3 170 171: RNCC: 3 | RNVC: 2

25 Sep 1995

5340-33-200-5864
Mending Plate

332005864
CF 472 661 A: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-200-2551
Handwheel

332002551
323308001600: RNCC: 3 | RNVC: 2

19 Nov 2001

5340-33-155-7512
Mending Plate

331557512
596700: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-201-3564
Loop Clamp

332013564
92990837474: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-33-156-2333
Mending Plate

331562333
-76951-G970X: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-200-3856
Mounting Bracket

332003856
CF 218 059 AR: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-104-8038
Elastic Strap

331048038
191808: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-7003
Webbing Strap

332027003
9673.250.8220: RNCC: 3 | RNVC: 2
2540901433: RNCC: 5 | RNVC: 2
2540901433: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-181-0476
Mechanical Stop

331810476
-16745-95000: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-202-4367
Strap Hinge

332024367
C20500000001: RNCC: 3 | RNVC: 2

3 Jun 2003

5340-33-116-5150
Loop Clamp

331165150
5448233: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-4941
Bumper

331084941
99.08.107: RNCC: 3 | RNVC: 2

26 Mar 2001

5340-33-157-8087
Access Cover

331578087
720072: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-0121
Access Cover

331570121
-74870-Y9551: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-2542
Mounting Bracket

331082542
9644.251.0120: RNCC: 3 | RNVC: 2
2510009424: RNCC: 5 | RNVC: 2
2510009424: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-001-4799
Compression Cup

330014799
92027002: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-004-5569
Angle Bracket

330045569
NN53365P01: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-33-156-5045
Loop Clamp

331565045
-46016-W0400: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-9032
Mending Plate

331579032
319983: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-5163
Strap Hinge

332015163
10.01.01.01.050.00: RNCC: 3 | RNVC: 2

9 Aug 2002

5340-33-108-5398
Catch Strike

331085398
9644.251.6344: RNCC: 3 | RNVC: 2
2510901008: RNCC: 5 | RNVC: 2
2510901008: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-155-7693
Angle Bracket

331557693
767823: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-211-1179
Hook Handle

332111179
0228409: RNCC: 3 | RNVC: 2

16 Jun 2013

5340-33-204-4670
Mounting Bracket

332044670
EDAM050600: RNCC: 3 | RNVC: 2

19 Sep 2005

5340-33-206-1211
Mounting Bracket

332061211
SHN2022400: RNCC: 3 | RNVC: 2

23 Aug 2007

5340-33-107-4525
Mounting Plate

331074525
W280687402629: RNCC: 3 | RNVC: 2

4 Nov 1999

5340-33-107-1662
Mounting Bracket

331071662
PCAMI/RP/0361230061: RNCC: 3 | RNVC: 2

1 Jul 1999

5340-33-106-4626
Thumb Latch

331064626
2130050: RNCC: 3 | RNVC: 2
ALMCTI-1000002130050: RNCC: 5 | RNVC: 1

6 Mar 1998

5340-33-107-3411
Retaining Strap

331073411
61.12.160: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-125-8514
Access Cover

331258514
TAPON: RNCC: 3 | RNVC: 2

13 Sep 1995

5340-33-004-5177
Angle Bracket

330045177
622560: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-107-3440
Loop Clamp

331073440
PS-06 BLANCO: RNCC: 3 | RNVC: 2
PCAMI/RP/0900001050: RNCC: 6 | RNVC: 9

27 Sep 1999

5340-33-201-6187
Mending Plate

332016187
J57165120-002: RNCC: 3 | RNVC: 2

16 Sep 2002

5340-33-116-7925
Access Cover

331167925
01.00225/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-8172
Angle Bracket

331578172
737229: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-3418
Mounting Bracket

331073418
61.12.182: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-200-8087
Leather Strap

332008087
324142: RNCC: 3 | RNVC: 2

13 Mar 2002

5340-33-106-7869
Angle Bracket

331067869
7356.292.0088: RNCC: 3 | RNVC: 2
2530000963: RNCC: 5 | RNVC: 2

17 Mar 1999

5340-33-107-4958
Permanent Magnet

331074958
96.86.01.08: RNCC: 3 | RNVC: 2

29 Nov 1999

5340-33-157-7380
Access Cover

331577380
510518: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-105-7278
Access Cover

331057278
-74851-Y9500: RNCC: 3 | RNVC: 2

9 May 1996

5340-33-180-6004
Loop Clamp

331806004
169962: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-106-7870
Angle Bracket

331067870
7356.292.0157: RNCC: 3 | RNVC: 2
2930000574: RNCC: 5 | RNVC: 2

17 Mar 1999

5340-33-158-9466
Loop Clamp

331589466
-08723-16600: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-2994
Access Cover

331072994
21123997500: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-106-7270
Mounting Bracket

331067270
AM12010100: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-000-7477
Angle Bracket

330007477
539372: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-000-6665
Retaining Strap

330006665
513088: RNCC: 1 | RNVC: 2

6 Sep 1988

5340-33-000-6902
Mounting Bracket

330006902
544525: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-157-8445
Access Cover

331578445
753789: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-7866
Blank Panel

331577866
631406: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-4635
Strap Hinge

331564635
-80421-01C01: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-4804
Eye Hook

332014804
NN60594P01: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-116-0904
Mounting Bracket

331160904
BM-18134000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-3017
Retaining Strap

331083017
SP00937-35: RNCC: 3 | RNVC: 2

13 Feb 2001

5340-33-161-3680
Mounting Bracket

331613680
615895: RNCC: 3 | RNVC: 2
615895.90: RNCC: 5 | RNVC: 2

20 Jul 1995

5340-33-004-3839
Friction Catch

330043839
212-22131-27-1: RNCC: 3 | RNVC: 2

15 Mar 1999

5340-33-160-4326
Locking Stay

331604326
95.606.177: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-2126
Mounting Bracket

331082126
9644.100.0220: RNCC: 3 | RNVC: 2
1005005132: RNCC: 5 | RNVC: 2
1005005132: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-107-3017
Mounting Plate

331073017
21124232000: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-106-9415
Mounting Plate

331069415
318196: RNCC: 3 | RNVC: 2

7 Apr 1999

5340-33-001-1978
Mounting Bracket

330011978
35-66581-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-2220
Mounting Bracket

330012220
35-76100-0004: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-203-6646
Retaining Strap

332036646
MMN346-BD70: RNCC: 3 | RNVC: 2
MMN346-BD70: RNCC: 5 | RNVC: 2
5340-33-R03-1728: RNCC: 6 | RNVC: 9
5340-33-R05-6469: RNCC: 6 | RNVC: 9

22 Jul 2004

5340-33-001-1948
Mounting Bracket

330011948
35-66179-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-189-2265
Mounting Bracket

331892265
01040010: RNCC: 3 | RNVC: 2
PCAMI/1000000140010: RNCC: 5 | RNVC: 2

20 Jul 1995

5340-33-161-6654
Mending Plate

331616654
919-2-12: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-107-2414
Access Cover

331072414
SS-18-0040A: RNCC: 3 | RNVC: 2

14 Sep 1999

5340-33-001-1385
Angle Bracket

330011385
35-54200-1201: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-1081
Mounting Bracket

330011081
35-46777-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-203-3048
Support Hook

332033048
CP-30-P-002: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-33-205-9898
Lock-Release Lever

332059898
00518018: RNCC: 3 | RNVC: 2
5355-33-M26-7430: RNCC: 6 | RNVC: 9

12 Jun 2007

5340-33-005-3025
Loop Clamp

330053025
212-51117-1-00: RNCC: 3 | RNVC: 2

3 May 2001

5340-33-202-7695
Bow Handle

332027695
INS0494/0060: RNCC: 3 | RNVC: 2

20 Oct 2003

5340-33-103-5126
Loop Clamp

331035126
1310: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-002-0037
Strap Hinge

330020037
35-22930-1501: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-126-5772
Rod End Connector

331265772
G59303-C-0400: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-0414
Rod End Clevis

332000414
35-23317-0014A02: RNCC: 3 | RNVC: 2
35-23317-0014A04: RNCC: 5 | RNVC: 2

27 Sep 2001

5340-33-166-0299
Locking Stay

331660299
0-78-6-10: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-156-4628
Strap Hinge

331564628
-90810-G9501: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-5006
Loop Clamp

331565006
-46289-G2511: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-180-7846
Threaded Rod End

331807846
543292: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-106-1468
Swivel Caster

331061468
6.437.323.0 - MEISA: RNCC: 3 | RNVC: 2

14 May 1997

5340-33-203-2714
Mounting Bracket

332032714
9673.250.6027: RNCC: 3 | RNVC: 2
2540901568: RNCC: 5 | RNVC: 2
2540901568: RNCC: 5 | RNVC: 2

19 Feb 2004

5340-33-180-8034
Loop Clamp

331808034
569157K1: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-105-7301
Access Door Hinge

331057301
-87374-Y9501: RNCC: 3 | RNVC: 2

9 May 1996

5340-33-156-3236
Pipe Hanger

331563236
-16419-04C00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-114-4885
Access Cover

331144885
5.50 TTG-35: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-002-1852
Access Cover

330021852
600203: RNCC: 3 | RNVC: 2
4210000035: RNCC: 5 | RNVC: 2
4210-000035: RNCC: 5 | RNVC: 2

13 Jul 1993

5340-33-106-2149
Bumper

331062149
571915: RNCC: 3 | RNVC: 2

27 Oct 1997

5340-33-001-4727
Angle Bracket

330014727
92026744: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-204-0807
Webbing Strap

332040807
02512541: RNCC: 3 | RNVC: 2
532533M267413: RNCC: 6 | RNVC: 9

10 Mar 2005

5340-33-201-5738
Access Cover

332015738
185076: RNCC: 3 | RNVC: 2

4 Sep 2002

5340-33-154-4943
Mounting Bracket

331544943
814720: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-115-8147
Access Cover

331158147
11206001800: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-202-2566
Utility Access Door

332022566
35-21059-0007B01: RNCC: 3 | RNVC: 2

14 Mar 2003

5340-33-116-0936
Shimmy Damper

331160936
OB-11222000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-1653
Access Cover

332021653
223561308-01: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-33-205-5535
Angle Bracket

332055535
95-25904-1401: RNCC: 3 | RNVC: 2

15 Dec 2006

5340-33-107-7020
Mounting Bracket

331077020
9644.250.2140: RNCC: 3 | RNVC: 2
2510008533: RNCC: 5 | RNVC: 2

17 Apr 2000

5340-33-201-6131
Mounting Bracket

332016131
320552: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-33-200-6145
Mounting Bracket

332006145
50.33.001.A: RNCC: 3 | RNVC: 2

7 Feb 2002

5340-33-105-9359
Rod End Clevis

331059359
16661: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-116-1516
Mounting Plate

331161516
9.987.1.630.002.5: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-3706
Angle Bracket

331613706
616493: RNCC: 3 | RNVC: 2

25 Jul 1995

5340-33-155-7695
Angle Bracket

331557695
766384: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-108-2190
Mending Plate

331082190
9644.101.0058: RNCC: 3 | RNVC: 2
1005006290: RNCC: 5 | RNVC: 2
1005006290: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-004-7126
Loop Clamp

330047126
NRN50052G20: RNCC: 3 | RNVC: 2

10 Sep 1999

5340-33-001-3569
Angle Bracket

330013569
92018109: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-105-8960
Handle Grip

331058960
5340.000255: RNCC: 3 | RNVC: 2

2 Jul 1996

5340-33-161-5385
Mounting Bracket

331615385
318451: RNCC: 3 | RNVC: 2
318451: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-6678
Mounting Bracket

332006678
318984: RNCC: 3 | RNVC: 2

22 Feb 2002

5340-33-102-1828
Clamping Catch

331021828
MCL-5-36: RNCC: 3 | RNVC: 2
52530000360: RNCC: 3 | RNVC: 2
MCL-5-36: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-208-7398
Utility Resilient Mount

332087398
123182: RNCC: 3 | RNVC: 2
LIPA00046: RNCC: 5 | RNVC: 2

24 Jan 2011

5340-33-125-5034
Webbing Strap

331255034
2221039: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-200-9802
Mounting Plate

332009802
2510008797: RNCC: 3 | RNVC: 2
2510008797: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-107-0735
Mounting Bracket

331070735
25401036-9: RNCC: 3 | RNVC: 2
PCAMI/RP/0554010369: RNCC: 6 | RNVC: 9

14 Jun 1999

5340-33-002-4952
Access Cover

330024952
212-21141-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-116-6273
Access Cover

331166273
SA-B-66: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-1232
Access Cover

332001232
324147: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-202-3538
Mounting Bracket

332023538
W290699610000: RNCC: 3 | RNVC: 2

21 Apr 2003

5340-33-108-2475
Mending Plate

331082475
9644.250.0609: RNCC: 3 | RNVC: 2
2510007427: RNCC: 5 | RNVC: 2
2510007427: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-201-3801
Mounting Bracket

332013801
EMAC055000: RNCC: 3 | RNVC: 2

2 Jul 2002

5340-33-156-2700
Pipe Hanger

331562700
-17575-G9602: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-9853
Turnbuckle

332009853
2510900055: RNCC: 3 | RNVC: 2
2510900055: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-106-6008
Retaining Strap

331066008
682801: RNCC: 3 | RNVC: 2

4 Sep 1998

5340-33-004-6192
Access Cover

330046192
6318150040: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-107-1760
Loop Clamp

331071760
4730000245: RNCC: 3 | RNVC: 2
DIN 3016 D1 8 8X15 W1 2: RNCC: 4 | RNVC: 1

1 Jul 1999

5340-33-155-3772
Expansion Plug

331553772
3040801449: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-115-5457
Access Cover

331155457
326.367: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-7136
Bow Handle

332027136
9673.250.5752: RNCC: 3 | RNVC: 2
5340900118: RNCC: 5 | RNVC: 2
5340900118: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-203-5964
Access Cover

332035964
999082290: RNCC: 3 | RNVC: 2
999082290: RNCC: 5 | RNVC: 2

8 Jun 2004

5340-33-001-3882
Angle Bracket

330013882
92020263: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-203-5490
Flush Catch Claw

332035490
80040005: RNCC: 3 | RNVC: 2

25 May 2004

5340-33-125-7305
Loop Clamp

331257305
9.302.1.977.001.4: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-0104
Padlock

330020104
58 E: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-33-106-3399
Elbow Catch

331063399
4021615640: RNCC: 3 | RNVC: 2

15 Sep 1997

5340-33-201-9403
Mounting Bracket

332019403
086.43.01.00: RNCC: 3 | RNVC: 2

18 Nov 2002

5340-33-201-9714
Access Cover

332019714
205652001: RNCC: 3 | RNVC: 2
205652001: RNCC: 5 | RNVC: 2

29 Nov 2002

5340-33-200-1208
Door Hook

332001208
323570: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-001-5169
Access Cover

330015169
92030229: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-107-1767
Loop Clamp

331071767
196943: RNCC: 3 | RNVC: 2

1 Jul 1999

5340-33-004-1911
Access Cover

330041911
730091802: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-201-4765
Access Cover

332014765
J52464010-403: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-205-1577
Bolt And Spacer Kit

332051577
09116-06115: RNCC: 3 | RNVC: 2

19 May 2006

5340-33-105-7545
Access Cover

331057545
CMH95200-3/1/1-7: RNCC: 3 | RNVC: 2

1 Jun 1996

5340-33-203-1491
Lock-Release Lever

332031491
9673.250.5920: RNCC: 3 | RNVC: 2
2540900556: RNCC: 5 | RNVC: 2
2540900556: RNCC: 5 | RNVC: 2

6 Feb 2004

5340-33-126-8119
Mounting Plate

331268119
4043494: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3430
Retaining Strap

330013430
92014664: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-204-7566
Mounting Plate

332047566
5038130: RNCC: 3 | RNVC: 2
1.124.60.900-A: RNCC: 5 | RNVC: 2

10 Jan 2006

5340-33-202-9084
Mounting Bracket

332029084
40.18.74.0001.0: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-201-6051
Retaining Strap

332016051
0639.470.0559: RNCC: 3 | RNVC: 2
4730002412: RNCC: 5 | RNVC: 2
4730002412: RNCC: 5 | RNVC: 2

6 Sep 2002

5340-33-105-2425
Mounting Plate

331052425
-10200506-1: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-190-3880
Loop Clamp

331903880
2271-0: RNCC: 3 | RNVC: 2
5975000705: RNCC: 5 | RNVC: 2
2271-0: RNCC: 5 | RNVC: 2

20 Jul 1995

5340-33-102-2937
Mounting Bracket

331022937
976-C-1: RNCC: 3 | RNVC: 2

11 Jan 1991

5340-33-107-3048
Cushioning Pad

331073048
21124542000: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-001-1002
Mounting Bracket

330011002
35-46691-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-003-4038
Loop Clamp

330034038
11.28986-0056: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-116-3920
Mounting Bracket

331163920
EV-2336: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-1855
Angle Bracket

332111855
10-70000-0801: RNCC: 3 | RNVC: 2

6 Jul 2013

5340-33-116-5648
Loop Clamp

331165648
16731-ZE2-003: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-102-5914
Mounting Plate

331025914
260-B: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-4571
Mounting Plate

332004571
WW 486 549 -X: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-33-200-4231
Access Cover

332004231
WQ 410 172 -T: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-190-3508
Access Cover

331903508
8-06700: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-204-0381
Access Cover

332040381
114660-01470: RNCC: 3 | RNVC: 2

8 Feb 2005

5340-33-107-9605
Turnbuckle

331079605
00.900.05.200: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-33-209-3082
Access Cover

332093082
191445469: RNCC: 3 | RNVC: 2
191445469: RNCC: 5 | RNVC: 2

27 Sep 2011

Load More Results