What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 4 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 4 of 39

5340-33-189-1778
Access Cover

331891778
02240180: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-181-9992
Retaining Clip

331819992
-74600025-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-000-7062
Retaining Band

330007062
575306: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-206-3845
Access Cover

332063845
206150310: RNCC: 3 | RNVC: 2

11 Dec 2007

5340-33-000-9794
Handle Grip

330009794
35-21215-0401: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-202-9053
Mounting Plate

332029053
223551756-01: RNCC: 3 | RNVC: 2
223551756: RNCC: 5 | RNVC: 1

27 Nov 2003

5340-33-211-2991
Mounting Plate

332112991
5061540: RNCC: 3 | RNVC: 2
1.164.91.002: RNCC: 5 | RNVC: 2

13 Aug 2013

5340-33-000-0627
Angle Bracket

330000627
6.302.0.623.001.4: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-105-9634
Angle Bracket

331059634
8.006: RNCC: 3 | RNVC: 2

5 Feb 1997

5340-33-187-5606
Loop Clamp

331875606
0301167-8: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-9997
Access Cover

332039997
A15500009: RNCC: 3 | RNVC: 2
IV33R272239: RNCC: 5 | RNVC: 2

31 Jan 2005

5340-33-200-1677
Mounting Bracket

332001677
28111105: RNCC: 3 | RNVC: 2

26 Oct 2001

5340-33-108-1806
Mounting Bracket

331081806
7054.252.0265: RNCC: 3 | RNVC: 2
2510701057: RNCC: 5 | RNVC: 2

29 Jan 2001

5340-33-205-5776
Mounting Bracket

332055776
CBD58504P38: RNCC: 3 | RNVC: 2

21 Dec 2006

5340-33-211-1916
Mounting Bracket

332111916
INS030216006000000: RNCC: 3 | RNVC: 2

6 Jul 2013

5340-33-000-6683
Retaining Strap

330006683
569250: RNCC: 1 | RNVC: 2

7 Sep 1988

5340-33-106-8193
Mounting Bracket

331068193
2510011255: RNCC: 3 | RNVC: 2
7356.252.4090: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-001-0744
Rod End Clevis

330010744
35-46362-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-106-8463
Access Door Hinge

331068463
319122: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-158-4220
Bumper

331584220
150026: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-001-4935
Expansion Plug

330014935
92027586: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-181-6338
Locking Stay

331816338
-01700367-1: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-4333
Retaining Strap

330014333
92026161: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-203-6517
Mounting Bracket

332036517
9356.252.7180: RNCC: 3 | RNVC: 2
2510-903931: RNCC: 5 | RNVC: 2

20 Jul 2004

5340-33-000-2475
Expansion Plug

330002475
3340803671: RNCC: 1 | RNVC: 2
3340803671: RNCC: 3 | RNVC: 2

22 May 1987

5340-33-105-2195
Mounting Plate

331052195
-04200458-0: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-156-2785
Access Door Hinge

331562785
-90410-G9700: RNCC: 3 | RNVC: 2
90410-G9700: RNCC: 6 | RNVC: 9

11 Jul 1995

5340-33-145-5286
Access Cover

331455286
83-111: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-205-3550
Access Cover

332053550
26437-0X000: RNCC: 3 | RNVC: 2

23 Aug 2006

5340-33-116-1365
Retaining Strap

331161365
BL-17199000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-0588
Mounting Bracket

332010588
113-0144-04: RNCC: 3 | RNVC: 2

24 Apr 2002

5340-33-002-5317
Access Cover

330025317
212-11133-2: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-003-4405
Leather Strap

330034405
SP-00471: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-116-3574
Access Cover

331163574
6646.091: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-1070
Mounting Bracket

330011070
35-46749-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-000-9973
Mounting Bracket

330009973
35-23402-0105: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-210-8714
Cushioning Pad

332108714
PCAMI/AC/ACTO42A/12/5: RNCC: 3 | RNVC: 2
USP-HK-5: RNCC: 5 | RNVC: 2

17 Mar 2013

5340-33-161-6239
Flush Catch Claw

331616239
J-422: RNCC: 3 | RNVC: 2

3 Oct 1994

5340-33-004-5221
Access Cover

330045221
0022284800: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-154-0254
Butt Hinge

331540254
731365: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-126-2312
Access Cover

331262312
H11930/2/24/1: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-33-206-2103
Rod End Clevis

332062103
35-94105-0201: RNCC: 3 | RNVC: 2

26 Sep 2007

5340-33-102-4011
Leather Strap

331024011
MB51-8-12: RNCC: 3 | RNVC: 2
MB51-8-12: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-0003
Mounting Bracket

330020003
35-63633-0003: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-116-8647
Mounting Plate

331168647
598/1-31-8: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-7954
Loop Clamp

331167954
DSH-331: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-5050
Access Cover

330025050
212-21102-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-201-1286
Plain Solid Disk

332011286
1025-900162: RNCC: 3 | RNVC: 2

14 May 2002

5340-33-002-9634
Door Handle

330029634
6317601259: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-002-0009
Mounting Bracket

330020009
35-63643-0003: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-001-1805
Angle Bracket

330011805
35-63011-0901: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-200-1170
Angle Bracket

332001170
7059.252.0089: RNCC: 3 | RNVC: 2
2510700869: RNCC: 5 | RNVC: 2

8 Oct 2001

5340-33-200-1150
Angle Bracket

332001150
7053.252.0063: RNCC: 3 | RNVC: 2
2530700008: RNCC: 5 | RNVC: 2

8 Oct 2001

5340-33-108-2105
Catch Strike

331082105
0640.100.0149: RNCC: 3 | RNVC: 2
1005004748: RNCC: 5 | RNVC: 2
1005004748: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-108-4220
Access Cover

331084220
0639.250.4095: RNCC: 3 | RNVC: 2
2510006360: RNCC: 5 | RNVC: 2
2510006360: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-155-1882
Loop Clamp

331551882
A025MM: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-103-2020
Loop Clamp

331032020
9039.20.000.025: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-7487
Utility Access Door

332077487
4406579: RNCC: 3 | RNVC: 2

29 Sep 2009

5340-33-107-7396
Angle Bracket

331077396
W290683111700: RNCC: 3 | RNVC: 2

19 May 2000

5340-33-201-8181
Cushioning Pad

332018181
1005006045: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-108-4357
Catch Strike

331084357
9644.251.5871: RNCC: 3 | RNVC: 2
2510900100: RNCC: 5 | RNVC: 2
2510900100: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-107-8763
Mounting Plate

331078763
7054.252.0004: RNCC: 3 | RNVC: 2
2510700835: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-33-201-0121
Access Cover

332010121
2540900256: RNCC: 3 | RNVC: 2
2540900256: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-108-4446
Retaining Band

331084446
9644.250.8750: RNCC: 3 | RNVC: 2
2540001212: RNCC: 5 | RNVC: 2
2540001212: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-108-2693
Access Cover

331082693
9644.121.0720: RNCC: 3 | RNVC: 2
2510900284: RNCC: 5 | RNVC: 2
2510900284: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-108-4433
Retaining Strap

331084433
9644.250.8180: RNCC: 3 | RNVC: 2
2540001048: RNCC: 5 | RNVC: 2
2540001048: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-001-0986
Mounting Bracket

330010986
35-46671-0006: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-166-0430
Access Cover

331660430
BW-68: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-161-7012
Padlock

331617012
400/30: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-102-3932
Rod End Connector

331023932
MDL-3-52: RNCC: 3 | RNVC: 2
MDL-3-52: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-4296
Access Cover

332054296
5041010: RNCC: 3 | RNVC: 2
1.143.92.021: RNCC: 5 | RNVC: 2

22 Sep 2006

5340-33-103-2443
Rod End Clevis

331032443
1055-000363: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-7755
Angle Bracket

331557755
316914: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-202-6732
Mechanical Stop

332026732
5032008: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-33-003-3465
Loop Clamp

330033465
R508-F10: RNCC: 3 | RNVC: 2

24 Jun 1997

5340-33-103-1863
Mounting Bracket

331031863
2510-001973: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-4856
Turnbuckle

332014856
-44200-37G10: RNCC: 3 | RNVC: 2

7 Aug 2002

5340-33-200-3975
Angle Bracket

332003975
CF 807 357 A: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-116-0659
Loop Clamp

331160659
HB-13226100: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-5932
Bumper

331075932
116.0001.29.00: RNCC: 3 | RNVC: 2

27 Jan 2000

5340-33-107-3003
Retaining Strap

331073003
21124056000: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-161-6151
Metal Grille

331616151
108.130: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-160-6485
Bow Handle

331606485
95.517.654: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-115-8645
Loop Clamp

331158645
ABR-FS-12: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-33-106-6772
Rim Lock Set

331066772
-68630-G9651: RNCC: 3 | RNVC: 2

28 Dec 1998

5340-33-000-7010
Loop Clamp

330007010
814723: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-107-7418
Mounting Bracket

331077418
W290684004200: RNCC: 3 | RNVC: 2

25 May 2000

5340-33-004-1983
Access Cover

330041983
622738: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-203-5882
Mounting Plate

332035882
021.40.20.32: RNCC: 3 | RNVC: 2

2 Jun 2004

5340-33-106-4858
Mounting Bracket

331064858
615135: RNCC: 3 | RNVC: 2

6 Mar 1998

5340-33-106-4698
Access Cover

331064698
8143605: RNCC: 3 | RNVC: 2

6 Mar 1998

5340-33-107-3169
Access Cover

331073169
21129687000: RNCC: 3 | RNVC: 2

24 Sep 1999

5340-33-203-0043
Mounting Plate

332030043
VR08140100: RNCC: 3 | RNVC: 2

7 Jan 2004

5340-33-106-6031
Access Cover

331066031
542189: RNCC: 3 | RNVC: 2

4 Sep 1998

5340-33-000-6921
Loop Clamp

330006921
192382: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-156-5025
Loop Clamp

331565025
-08723-1665A: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-0302
Access Cover

332030302
341055028: RNCC: 3 | RNVC: 2
341055028: RNCC: 5 | RNVC: 2

19 Jan 2004

5340-33-200-5938
Mounting Plate

332005938
WW 488 099: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-116-1641
Rod End Clevis

331161641
3 128 979: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-3102
Mounting Plate

331073102
21126712500: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-202-9571
Mounting Bracket

332029571
223552771-01: RNCC: 3 | RNVC: 2
223552771: RNCC: 5 | RNVC: 1

15 Dec 2003

5340-33-201-9532
Access Cover

332019532
223591108-01: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-33-002-7063
Access Cover

330027063
B 160-05: RNCC: 3 | RNVC: 2

26 Jul 1995

5340-33-200-1804
Strap Hinge

332001804
212-22423-02.1: RNCC: 3 | RNVC: 2

29 Oct 2001

5340-33-116-8636
Plain Solid Disk

331168636
598/52-3: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-181-1165
Retaining Strap

331811165
-76920-G970X: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-6042
Mounting Plate

332006042
B204A.15: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-206-8600
Utility Resilient Mount

332068600
138002: RNCC: 3 | RNVC: 2
SCB45: RNCC: 5 | RNVC: 1
M18110: RNCC: 5 | RNVC: 2

22 Jul 2008

5340-33-116-3420
Plain Solid Disk

331163420
8990.011: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-2886
Retaining Strap

331062886
41085: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-33-200-9403
Handle Grip

332009403
46 690 921 02: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-33-202-6686
Mounting Bracket

332026686
9673.250.1250: RNCC: 3 | RNVC: 2
1005900403: RNCC: 5 | RNVC: 2
1005900403: RNCC: 5 | RNVC: 2

24 Sep 2003

5340-33-000-6859
Loop Clamp

330006859
4730001728: RNCC: 3 | RNVC: 2
574276: RNCC: 3 | RNVC: 2
500005569: RNCC: 3 | RNVC: 2
574276: RNCC: 5 | RNVC: 9

8 Sep 1988

5340-33-108-4397
Mounting Plate

331084397
9644.251.5088: RNCC: 3 | RNVC: 2
2540000522: RNCC: 5 | RNVC: 2
2540000522: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-155-7762
Angle Bracket

331557762
731542: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-108-2106
Catch Strike

331082106
0640.100.0159: RNCC: 3 | RNVC: 2
1005004753: RNCC: 5 | RNVC: 2
1005004753: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-156-2198
Angle Bracket

331562198
-62523-G9651: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-204-4168
Access Cover

332044168
W280698407201: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-204-0310
Mounting Bracket

332040310
9502.103.8102: RNCC: 3 | RNVC: 2
1010900123: RNCC: 5 | RNVC: 2

7 Feb 2005

5340-33-158-2239
Retaining Clip

331582239
0216531-2: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-105-0542
Mounting Bracket

331050542
RAL-200-2-12-1: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-000-0512
Access Cover

330000512
130GL00020: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-001-5277
Retaining Strap

330015277
92033014: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-001-3758
Compression Cup

330013758
92019911: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-154-5524
Retaining Strap

331545524
319759: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-205-1580
Bolt And Spacer Kit

332051580
13602-05A10: RNCC: 3 | RNVC: 2

19 May 2006

5340-33-001-1068
Mounting Bracket

330011068
35-46748-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-201-9321
Stand Base

332019321
D0941411861: RNCC: 3 | RNVC: 2

15 Nov 2002

5340-33-203-5746
Mounting Bracket

332035746
W280699680602: RNCC: 3 | RNVC: 2

27 May 2004

5340-33-211-6073
Retaining Band

332116073
TOM0201821: RNCC: 3 | RNVC: 2
TOM0201821: RNCC: 3 | RNVC: 2

7 Dec 2013

5340-33-116-7573
Access Cover

331167573
510457: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-5149
Mounting Bracket

331615149
2520000285: RNCC: 3 | RNVC: 2
322615: RNCC: 3 | RNVC: 2

4 Mar 1994

5340-33-206-0776
Loop Clamp

332060776
NRN50052G16: RNCC: 3 | RNVC: 2

26 Jul 2007

5340-33-107-2495
Clamping Catch

331072495
29729242: RNCC: 3 | RNVC: 2

24 Sep 1999

5340-33-107-2303
Extension Handle

331072303
42630001040: RNCC: 3 | RNVC: 2

14 Sep 1999

5340-33-202-6544
Access Cover

332026544
223551392-01: RNCC: 3 | RNVC: 2

22 Sep 2003

5340-33-002-0588
Mounting Bracket

330020588
C-20030-8/1-I-03-7: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-33-107-7422
Mounting Bracket

331077422
W290684007400: RNCC: 3 | RNVC: 2

25 May 2000

5340-33-188-9772
Mending Plate

331889772
3 170 306: RNCC: 3 | RNVC: 2

25 Sep 1995

5340-33-000-7051
Retaining Band

330007051
141141: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-001-5407
Angle Bracket

330015407
92040427: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-204-4167
Access Cover

332044167
W280698401911: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-108-4476
Mounting Plate

331084476
9644.251.5593: RNCC: 3 | RNVC: 2
2540001469: RNCC: 5 | RNVC: 2
2540001469: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-001-4667
Retaining Strap

330014667
92026626: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-000-7020
Loop Clamp

330007020
3090111211: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-000-6989
Loop Clamp

330006989
781124: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-000-7482
Angle Bracket

330007482
561997: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-201-7304
Loop Clamp

332017304
EN4114F28NH1: RNCC: 2 | RNVC: 2

15 Oct 2002

5340-33-155-7747
Angle Bracket

331557747
551876: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-001-3773
Retaining Strap

330013773
92019930: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-210-2491
Loop Clamp

332102491
191152297: RNCC: 3 | RNVC: 2
191152297: RNCC: 5 | RNVC: 2

9 Jul 2012

5340-33-189-2155
Access Cover

331892155
01230030: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-106-6534
Retaining Strap

331066534
SHN2020870: RNCC: 3 | RNVC: 2

22 Dec 1998

5340-33-004-5240
Access Cover

330045240
505646: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-107-7016
Loop Clamp

331077016
7562.252.1470: RNCC: 3 | RNVC: 2
1055700005: RNCC: 5 | RNVC: 2

17 Apr 2000

5340-33-206-3062
Door Handle

332063062
0303021: RNCC: 3 | RNVC: 2
7320-33-M04-0148: RNCC: 6 | RNVC: 9

31 Oct 2007

5340-33-201-4064
Angle Bracket

332014064
A2810536-001: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-104-6456
Door Handle

331046456
10.12.14.0825.0: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-33-181-1167
Retaining Band

331811167
-92520-C6000: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-004-4782
Shimmy Damper

330044782
169213: RNCC: 3 | RNVC: 2

2 Jun 1999

5340-33-204-7330
Loop Clamp

332047330
09403A23401: RNCC: 3 | RNVC: 2

22 Dec 2005

5340-33-108-2104
Mending Plate

331082104
0640.100.0175: RNCC: 3 | RNVC: 2
1005004732: RNCC: 5 | RNVC: 2
1005004732: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-201-6978
Mounting Bracket

332016978
TOM0820030: RNCC: 3 | RNVC: 2

4 Oct 2002

5340-33-157-7507
Access Cover

331577507
542314: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-2143
Mending Plate

331082143
9644.100.0105: RNCC: 3 | RNVC: 2
1005005314: RNCC: 5 | RNVC: 2
1005005314: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-160-3692
Bumper

331603692
1750010: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-6697
Retaining Strap

330006697
645829: RNCC: 1 | RNVC: 2

7 Sep 1988

5340-33-107-7019
Mounting Bracket

331077019
9644.250.2120: RNCC: 3 | RNVC: 2
2510008532: RNCC: 5 | RNVC: 2

17 Apr 2000

5340-33-202-4305
Access Cover

332024305
SM931605: RNCC: 3 | RNVC: 2

29 May 2003

5340-33-155-7784
Angle Bracket

331557784
801898: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-203-2756
Mounting Bracket

332032756
9673.250.1520: RNCC: 3 | RNVC: 2
1005900396: RNCC: 5 | RNVC: 2
1005900396: RNCC: 5 | RNVC: 2

19 Feb 2004

5340-33-160-5805
Mechanical Stop

331605805
75.462.446: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-1983
Access Cover

330001983
771869: RNCC: 1 | RNVC: 2
771869: RNCC: 3 | RNVC: 2

10 Dec 1986

5340-33-001-4470
Retaining Strap

330014470
92026356: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-166-1086
Coat And Hat Hook

331661086
CTI-P-058: RNCC: 3 | RNVC: 2
PCAMI/VE/V00R13A/95: RNCC: 4 | RNVC: 1

20 Jul 1995

5340-33-202-6233
Mounting Bracket

332026233
9673.250.1470: RNCC: 3 | RNVC: 2
1005900378: RNCC: 5 | RNVC: 2
1005900378: RNCC: 5 | RNVC: 2

16 Sep 2003

5340-33-200-8267
Mounting Bracket

332008267
7060.252.0029: RNCC: 3 | RNVC: 2
2510700231: RNCC: 5 | RNVC: 2

18 Mar 2002

5340-33-004-5218
Access Cover

330045218
995410: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-205-9959
Metal Grille

332059959
46669247: RNCC: 3 | RNVC: 2
46669247: RNCC: 5 | RNVC: 2

14 Jun 2007

5340-33-155-8984
Angle Bracket

331558984
315495: RNCC: 3 | RNVC: 2
315495: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-107-7453
Mounting Bracket

331077453
W290684037700: RNCC: 3 | RNVC: 2

25 May 2000

5340-33-208-5280
Utility Resilient Mount

332085280
MV-7000-7: RNCC: 3 | RNVC: 2

6 Sep 2010

5340-33-203-6683
Webbing Strap

332036683
02517014: RNCC: 3 | RNVC: 2

23 Jul 2004

5340-33-204-8641
Mounting Bracket

332048641
TA1K1000C: RNCC: 3 | RNVC: 2

15 Feb 2006

5340-33-000-6992
Loop Clamp

330006992
782378: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-161-1515
Mounting Bracket

331611515
322220: RNCC: 3 | RNVC: 2

11 Dec 1992

5340-33-187-5602
Loop Clamp

331875602
0301163-5: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-5330
Handle Grip

331065330
C0601060: RNCC: 3 | RNVC: 2
PCAMI/RP/32C0601060: RNCC: 4 | RNVC: 1
060106: RNCC: 5 | RNVC: 1

13 Apr 1998

5340-33-202-9820
Mounting Plate

332029820
223441707-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-203-6870
Utility Access Door

332036870
2123010240-3: RNCC: 3 | RNVC: 2

24 Aug 2004

5340-33-211-4958
Latch Bar

332114958
0212355: RNCC: 3 | RNVC: 2

22 Nov 2013

5340-33-004-7698
Access Door Hinge

330047698
-0165007-0: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-33-203-5451
Mounting Bracket

332035451
INS0336/0001: RNCC: 3 | RNVC: 2

21 May 2004

5340-33-002-5167
Access Cover

330025167
212-46623-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-190-3874
Loop Clamp

331903874
2233-0: RNCC: 3 | RNVC: 2
09407-12402: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-0042
Rod End Connector

332010042
2520000461: RNCC: 3 | RNVC: 2
2520000461: RNCC: 5 | RNVC: 2

22 Apr 2002

5340-33-201-4217
Angle Bracket

332014217
A2811862-001: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-33-154-8453
Access Cover

331548453
1 125 883 025: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-105-5760
Handle Grip

331055760
-01902110-0: RNCC: 3 | RNVC: 2

9 May 1996

5340-33-201-5259
Mounting Plate

332015259
9644.100.0069: RNCC: 3 | RNVC: 2
1005005220: RNCC: 5 | RNVC: 2
1005005220: RNCC: 5 | RNVC: 2

22 Aug 2002

5340-33-211-1922
Angle Bracket

332111922
INS030216007000000: RNCC: 3 | RNVC: 2

6 Jul 2013

5340-33-202-9343
Mounting Bracket

332029343
CBD50512P62: RNCC: 3 | RNVC: 2

1 Dec 2003

5340-33-158-2229
Retaining Clip

331582229
0216521-6: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-190-3875
Loop Clamp

331903875
2235-0: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-157-7498
Mending Plate

331577498
538522: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-209-6986
Utility Resilient Mount

332096986
121196: RNCC: 3 | RNVC: 2

8 Feb 2012

5340-33-200-1188
Mounting Bracket

332001188
7059.252.0460: RNCC: 3 | RNVC: 2
2510700743: RNCC: 5 | RNVC: 2

8 Oct 2001

5340-33-103-5136
Access Cover

331035136
1390: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-002-0008
Mounting Bracket

330020008
35-63642-0003: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-201-6827
Caster Frame

332016827
8796 011-441: RNCC: 3 | RNVC: 2

3 Oct 2002

5340-33-206-0820
Thumb Latch

332060820
120-1069-04: RNCC: 3 | RNVC: 2

27 Jul 2007

5340-33-204-7059
Mounting Bracket

332047059
PS-901371: RNCC: 3 | RNVC: 2

13 Dec 2005

5340-33-181-7701
Access Cover

331817701
-07201033-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-116-0340
Mending Plate

331160340
BM-12286000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-6488
Retaining Strap

331076488
5340001021: RNCC: 3 | RNVC: 2

17 Mar 2000

5340-33-116-5539
Access Cover

331165539
19610-ZE1-810: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-0863
Mounting Bracket

330010863
35-46523-0002: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-206-2011
Rod End Clevis

332062011
35-82112-0601: RNCC: 3 | RNVC: 2

24 Sep 2007

5340-33-205-8664
Bumper

332058664
CA46100-2201: RNCC: 3 | RNVC: 2

24 Apr 2007

5340-33-160-6003
Mounting Bracket

331606003
93.501.962: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-4130
Access Cover

332024130
SM931607: RNCC: 3 | RNVC: 2

19 May 2003

5340-33-202-6678
Mounting Bracket

332026678
9673.250.1450: RNCC: 3 | RNVC: 2
1005900372: RNCC: 5 | RNVC: 2
1005900372: RNCC: 5 | RNVC: 2

24 Sep 2003

5340-33-107-9167
Expansion Plug

331079167
120355X: RNCC: 3 | RNVC: 2
X0650564: RNCC: 3 | RNVC: 2

26 Sep 2000

5340-33-102-0802
Corner Brace

331020802
D-4-3E: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-202-9581
Mounting Bracket

332029581
223552780-01: RNCC: 3 | RNVC: 2
223552780: RNCC: 5 | RNVC: 1

15 Dec 2003

5340-33-000-0463
Angle Bracket

330000463
H350GS/D021/5: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-211-2066
Bumper

332112066
212-85000-43-1: RNCC: 3 | RNVC: 2

8 Jul 2013

5340-33-204-3863
Angle Bracket

332043863
PS-801027: RNCC: 3 | RNVC: 2

31 Aug 2005

5340-33-200-1168
Angle Bracket

332001168
7059.252.0002: RNCC: 3 | RNVC: 2
2530700010: RNCC: 5 | RNVC: 2

8 Oct 2001

5340-33-107-9592
Mounting Bracket

331079592
00.400.07.720: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-33-200-7955
Mounting Bracket

332007955
319346: RNCC: 3 | RNVC: 2

12 Mar 2002

5340-33-202-0248
Mending Plate

332020248
523302001300: RNCC: 3 | RNVC: 2

17 Dec 2002

5340-33-200-0206
Block Clamp

332000206
WW 488 100: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-33-160-3834
Mounting Plate

331603834
5.445.849: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-189-1865
Mounting Bracket

331891865
02330020: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-105-0569
Mounting Plate

331050569
REM-50-2-9-4: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-211-1503
Mounting Bracket

332111503
VR01030200: RNCC: 3 | RNVC: 2
VR01030200: RNCC: 3 | RNVC: 2

28 Jun 2013

5340-33-154-3837
Access Cover

331543837
806135: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-161-3889
Mending Plate

331613889
630631: RNCC: 3 | RNVC: 2

31 Jul 1995

5340-33-201-0634
Access Cover

332010634
98.A.004.01: RNCC: 3 | RNVC: 2
98.A.004.01: RNCC: 5 | RNVC: 2

24 Apr 2002

5340-33-105-5689
Retaining Strap

331055689
181375.61: RNCC: 3 | RNVC: 2

9 May 1996

5340-33-154-4161
Loop Clamp

331544161
3090223649: RNCC: 3 | RNVC: 2
3090223649: RNCC: 3 | RNVC: 2
4730000426: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-154-4158
Loop Clamp

331544158
3090215449: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-203-7227
Mounting Bracket

332037227
324-1-E: RNCC: 3 | RNVC: 2

10 Sep 2004

5340-33-105-8807
Extension Handle

331058807
2820: RNCC: 3 | RNVC: 2

5 Jul 1996

5340-33-103-2454
Mounting Bracket

331032454
1055-000384: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-115-8648
Loop Clamp

331158648
RN-149-161.SR: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-33-126-2310
Access Cover

331262310
H11930/2/21/1/C: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-33-211-2958
Mounting Bracket

332112958
SP08531: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-33-187-4911
Retaining Strap

331874911
193842: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-002-8521
Access Cover

330028521
35-22738-0501: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-201-1000
Mechanical Stop

332011000
35-42327-0003: RNCC: 3 | RNVC: 2

30 Apr 2002

5340-33-204-7558
Metal Grille

332047558
0890009: RNCC: 3 | RNVC: 2
650517: RNCC: 5 | RNVC: 2
5965-33-M00-4902: RNCC: 6 | RNVC: 9

10 Jan 2006

5340-33-107-0971
Loop Clamp

331070971
01555-00123: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-001-4788
Strap Hinge

330014788
92026827: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-000-9803
Mounting Bracket

330009803
35-21215-1401: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-102-2736
Leather Strap

331022736
1005-001643: RNCC: 3 | RNVC: 2

1 Mar 1991

5340-33-001-6831
Mounting Bracket

330016831
D57507-00: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-000-1742
Snap Hook

330001742
1005-001200: RNCC: 3 | RNVC: 2

1 Dec 1986

5340-33-001-1653
Mending Plate

330011653
35-61186-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-201-4620
Angle Bracket

332014620
J92561405-001: RNCC: 3 | RNVC: 2

26 Jul 2002

5340-33-157-0180
Access Cover

331570180
-90820-01C30: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-1882
Retaining Band

332001882
J57461810-001: RNCC: 3 | RNVC: 2

30 Oct 2001

5340-33-206-2700
Mounting Bracket

332062700
XX-000000063800: RNCC: 3 | RNVC: 2
000000063800: RNCC: 5 | RNVC: 2

19 Oct 2007

5340-33-116-5645
Bridge Clamp

331165645
19613-ZE1-000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-8203
Mounting Plate

332058203
500402626: RNCC: 3 | RNVC: 2

17 Apr 2007

5340-33-205-4617
Mounting Plate

332054617
1025901918: RNCC: 3 | RNVC: 2
9743.100.0105: RNCC: 5 | RNVC: 2

19 Oct 2006

5340-33-204-9873
Belt-Strap Keeper

332049873
D0932511032: RNCC: 3 | RNVC: 2

22 Mar 2006

5340-33-116-8334
Mounting Bracket

331168334
22 561: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-5626
Door Holder

332035626
80010111: RNCC: 3 | RNVC: 2

25 May 2004

5340-33-202-5245
Angle Bracket

332025245
MHC2030210: RNCC: 3 | RNVC: 2
MHC1030210: RNCC: 5 | RNVC: 2

1 Aug 2003

5340-33-203-2713
Mounting Bracket

332032713
9673.250.5456: RNCC: 3 | RNVC: 2
2540900838: RNCC: 5 | RNVC: 2
2540900838: RNCC: 5 | RNVC: 2

19 Feb 2004

5340-33-161-7036
Padlock

331617036
303SP/50: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-000-6981
Loop Clamp

330006981
765705: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-200-2206
Mounting Bracket

332002206
28141105: RNCC: 3 | RNVC: 2

6 Nov 2001

5340-33-204-4165
Access Cover

332044165
W280698422501: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-203-6516
Mounting Bracket

332036516
9356.252.7120: RNCC: 3 | RNVC: 2
2510-903924: RNCC: 5 | RNVC: 2

20 Jul 2004

5340-33-001-3525
Shelf Bracket

330013525
92016043: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-002-0038
Strap Hinge

330020038
35-22930-1502: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-202-9849
Mounting Plate

332029849
223551401-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-202-9868
Angle Bracket

332029868
223551808-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-106-8031
Mounting Bracket

331068031
REM-50-13-1: RNCC: 3 | RNVC: 2

31 Mar 1999

5340-33-114-4795
Detent Plunger

331144795
2TMG 1-15: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-155-7706
Angle Bracket

331557706
643160: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-201-0275
Mounting Bracket

332010275
346570023: RNCC: 3 | RNVC: 2
346570023: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-203-2725
Mounting Bracket

332032725
9673.250.6021: RNCC: 3 | RNVC: 2
2540901564: RNCC: 5 | RNVC: 2
2540901564: RNCC: 5 | RNVC: 2

19 Feb 2004

5340-33-107-9985
Mounting Bracket

331079985
9644.250.2020: RNCC: 3 | RNVC: 2
1055001753: RNCC: 5 | RNVC: 2
1055001753: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-107-6564
Mounting Bracket

331076564
8010: RNCC: 3 | RNVC: 2

17 Mar 2000

5340-33-205-2111
Loop Clamp

332052111
00550: RNCC: 3 | RNVC: 2
8411373005011: RNCC: 5 | RNVC: 2

20 Jun 2006

5340-33-002-8266
Mounting Bracket

330028266
NG00317915: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-157-7248
Loop Clamp

331577248
5340001068: RNCC: 3 | RNVC: 2
318160: RNCC: 3 | RNVC: 2
318160: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-6930
Loop Clamp

330006930
516353: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-001-1629
Mounting Bracket

330011629
35-61104-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-188-8912
Access Cover

331888912
630809720085: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-001-0949
Mounting Bracket

330010949
35-46644-0102: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-180-7738
Access Cover

331807738
528235: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-204-5375
Pipe Hanger

332045375
35-46386-0005A02: RNCC: 3 | RNVC: 2

10 Oct 2005

5340-33-106-8117
Mounting Bracket

331068117
RAL-200-2-7-2: RNCC: 3 | RNVC: 2

31 Mar 1999

5340-33-116-5528
Access Cover

331165528
19610-ZE2-000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-115-8520
Access Cover

331158520
H8/225/PH/2/6: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-33-158-8623
Access Cover

331588623
-70202001-0: RNCC: 3 | RNVC: 2
-37513791: RNCC: 5 | RNVC: 2
-37513851: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-158-2213
Retaining Clip

331582213
0216501-3: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-6470
Mechanical Stop

331166470
541.1.132: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-7409
Utility Resilient Mount

332077409
C 3695 144 D: RNCC: 3 | RNVC: 2

28 Sep 2009

5340-33-209-8018
Utility Resilient Mount

332098018
136004: RNCC: 3 | RNVC: 2

6 Mar 2012

5340-33-108-0142
Mounting Bracket

331080142
0639.470.0715: RNCC: 3 | RNVC: 2
2540000673: RNCC: 5 | RNVC: 2
2540000673: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-200-8083
Mounting Bracket

332008083
315444: RNCC: 3 | RNVC: 2

13 Mar 2002

5340-33-209-7666
Utility Guard Rail Section

332097666
0661.10.4504.00: RNCC: 3 | RNVC: 2

22 Feb 2012

5340-33-154-0245
Butt Hinge

331540245
200023: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-200-6555
Retaining Band

332006555
100031: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-33-161-4410
Locking Stay

331614410
207425: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-160-5934
Mounting Bracket

331605934
95.599.290: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-5147
Mounting Bracket

330045147
79.10.029.497: RNCC: 3 | RNVC: 2
9151347080: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-201-5779
Door Holder

332015779
235093: RNCC: 3 | RNVC: 2

4 Sep 2002

5340-33-004-8207
Mounting Bracket

330048207
NN60476P05: RNCC: 3 | RNVC: 2

22 Nov 1999

5340-33-156-2367
Angle Bracket

331562367
-54202-G9500: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-204-8387
Mounting Bracket

332048387
291622-7: RNCC: 3 | RNVC: 2

14 Feb 2006

5340-33-154-4812
Catch Strike

331544812
571878: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-001-0131
Rod End Clevis

330010131
35-42323-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-1872
Mounting Bracket

330011872
35-63685-0003: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-000-4237
Expansion Plug

330004237
3340804549: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-154-6521
Loop Clamp

331546521
318049: RNCC: 3 | RNVC: 2
318049: RNCC: 5 | RNVC: 9

1 Oct 1990

5340-33-160-6496
Rod End Clevis

331606496
95.545.113: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-002-8058
Retaining Clip

330028058
0004327179: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-002-9615
Clamping Catch

330029615
6317500884: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-200-9179
Catch Strike

332009179
E242000816: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-33-202-7541
Lock-Release Lever

332027541
2540-901168: RNCC: 3 | RNVC: 2

10 Oct 2003

5340-33-211-4940
Mounting Plate

332114940
0108102: RNCC: 3 | RNVC: 2

22 Nov 2013

5340-33-107-6079
Rod End Connector

331076079
42320010240: RNCC: 3 | RNVC: 2

10 Feb 2000

5340-33-211-2308
Angle Bracket

332112308
TP252565: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-33-205-4317
Mounting Bracket

332054317
W280683103008: RNCC: 3 | RNVC: 2

25 Sep 2006

5340-33-103-5152
Retaining Strap

331035152
1443-20-21: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-126-5763
Rod End Connector

331265763
G38212-R-0350: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-102-0729
Corner Brace

331020729
C-2-21C: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-201-6393
Rod End Clevis

332016393
1025-900870: RNCC: 3 | RNVC: 2

20 Sep 2002

5340-33-156-3139
Self-Locking Insert

331563139
-01658-00161: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-2594
Butt Hinge

332022594
35-14148-0003-01: RNCC: 3 | RNVC: 2

14 Mar 2003

5340-33-154-5665
Mending Plate

331545665
198731: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-33-003-2496
Mounting Plate

330032496
221022780: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-33-204-4348
Mounting Plate

332044348
738790: RNCC: 3 | RNVC: 2

14 Sep 2005

5340-33-190-2534
Retaining Strap

331902534
3212: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-192-3778
Retaining Strap

331923778
141.110: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-155-5583
Door Handle

331555583
737005: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-003-0640
Retaining Strap

330030640
0022077807: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-204-4477
Angle Bracket

332044477
PS-401106: RNCC: 3 | RNVC: 2

15 Sep 2005

5340-33-154-7478
Bow Handle

331547478
320009: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-106-6448
Loop Clamp

331066448
0813939: RNCC: 3 | RNVC: 2
0813939: RNCC: 5 | RNVC: 2

3 Dec 1998

5340-33-210-9489
Mounting Bracket

332109489
SP07203: RNCC: 3 | RNVC: 2

18 Apr 2013

5340-33-204-4053
Snap Hook

332044053
191-80: RNCC: 3 | RNVC: 2
BS-33P025494: RNCC: 5 | RNVC: 2
4030-33-P02-5494: RNCC: 6 | RNVC: 9

12 Sep 2005

5340-33-204-5464
Expansion Plug

332045464
6705924P005MAS: RNCC: 3 | RNVC: 2

11 Oct 2005

5340-33-200-1211
Mounting Bracket

332001211
323699: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-192-3781
Retaining Strap

331923781
641.200: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-9054
Padlock

332009054
5340000375: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-33-116-3748
Loop Clamp

331163748
1630090: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-6570
Mounting Bracket

330036570
191203: RNCC: 3 | RNVC: 2
4139301148: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-003-3282
Webbing Strap

330033282
SHN2032320: RNCC: 3 | RNVC: 2
SHN2032320: RNCC: 5 | RNVC: 2

28 May 1997

5340-33-202-5687
Mounting Bracket

332025687
263580031-01: RNCC: 3 | RNVC: 2

21 Aug 2003

5340-33-108-2478
Access Cover

331082478
9644.250.1710: RNCC: 3 | RNVC: 2
2510008080: RNCC: 5 | RNVC: 2
2510008080: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-205-9976
Turnbuckle

332059976
D0942511080: RNCC: 3 | RNVC: 2

14 Jun 2007

5340-33-116-8014
Mechanical Stop

331168014
01.00126/01: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-8373
Door Handle

330028373
SE022521800A: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-115-6077
Plain Solid Disk

331156077
92282218715: RNCC: 3 | RNVC: 2

27 Apr 1995

5340-33-201-8040
Angle Bracket

332018040
319794: RNCC: 3 | RNVC: 2

25 Oct 2002

5340-33-107-3061
Access Cover

331073061
21124641000: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-200-2032
Butt Hinge

332002032
J57166394-001: RNCC: 3 | RNVC: 2

5 Nov 2001

5340-33-001-8039
Access Cover

330018039
35-24084-0005A01: RNCC: 3 | RNVC: 2

1 Mar 1991

5340-33-001-2986
Loop Clamp

330012986
CAN68505-01: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-204-6878
Snap Hook

332046878
M73: RNCC: 3 | RNVC: 2
BS-33FCI0610: RNCC: 5 | RNVC: 2

7 Dec 2005

5340-33-001-4514
Angle Bracket

330014514
92026446-01: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-001-0849
Mounting Bracket

330010849
35-46514-0004: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-203-6867
Utility Access Door

332036867
2123010220: RNCC: 3 | RNVC: 2

24 Aug 2004

5340-33-200-4387
Access Cover

332004387
WQ 410 349 -T: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-002-0506
Access Cover

330020506
AC-C: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-33-204-4996
Access Cover

332044996
FIB IRICABDEL/V2: RNCC: 3 | RNVC: 2

29 Sep 2005

5340-33-114-5043
Mounting Bracket

331145043
5TG 4-31: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-116-8592
Mounting Bracket

331168592
598/3: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-204-3856
Mounting Bracket

332043856
PS-210087: RNCC: 3 | RNVC: 2

31 Aug 2005

5340-33-200-9732
Sliding Block

332009732
2510008309: RNCC: 3 | RNVC: 2
2510008309: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-188-7700
Loop Clamp

331887700
1510100: RNCC: 3 | RNVC: 2

1 Mar 1991

5340-33-181-2174
Loop Clamp

331812174
SS-06-0230F: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-206-0420
Retaining Strap

332060420
J92563751-001: RNCC: 3 | RNVC: 2

10 Jul 2007

5340-33-201-2796
Beam Gripping Clamp

332012796
1025-900329: RNCC: 3 | RNVC: 2

13 Jun 2002

5340-33-001-3148
Fusible Plug

330013148
5SH113: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-205-3034
Access Cover

332053034
11371-29F50: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-33-155-7499
Mending Plate

331557499
814513: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-104-1276
Bridge Clamp

331041276
W290622601400: RNCC: 3 | RNVC: 2

22 Mar 1996

5340-33-000-6925
Loop Clamp

330006925
510593: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-155-6237
Access Cover

331556237
821120: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-106-7313
Door Closer

331067313
00.430.901.00: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-205-4100
Access Cover

332054100
W290620309800: RNCC: 3 | RNVC: 2

15 Sep 2006

5340-33-203-1088
Lock-Release Lever

332031088
1025-901730: RNCC: 3 | RNVC: 2

29 Jan 2004

5340-33-201-4097
Angle Bracket

332014097
A2811611-401: RNCC: 3 | RNVC: 2

9 Jul 2002

5340-33-161-4354
Mounting Plate

331614354
277592: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-106-8191
Mounting Bracket

331068191
2510010997: RNCC: 3 | RNVC: 2
7356.292.0860: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-102-5915
Mounting Plate

331025915
266-B: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-9026
Mounting Bracket

332059026
1.120.25.05.000: RNCC: 3 | RNVC: 2

8 May 2007

5340-33-116-8092
Rod End Clevis

331168092
01.00564/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-8742
Loop Clamp

330048742
NN60161G01: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-33-200-8405
Mending Plate

332008405
9644.100.0104: RNCC: 3 | RNVC: 2
1005005583: RNCC: 5 | RNVC: 2
1005005583: RNCC: 5 | RNVC: 2

4 Apr 2002

5340-33-155-5696
Angle Bracket

331555696
751746: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-153-9690
Door Handle

331539690
882451: RNCC: 3 | RNVC: 2

4 Jan 1990

5340-33-158-2218
Retaining Clip

331582218
0216506-4: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-8523
Mounting Bracket

330028523
35-22783-0001: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-116-1593
Mounting Bracket

331161593
4 200 368: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3820
Expansion Plug

330013820
92020154: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-115-8177
Access Cover

331158177
10501803000: RNCC: 3 | RNVC: 2

27 Apr 1995

5340-33-205-1581
Bolt And Spacer Kit

332051581
13602-19B50: RNCC: 3 | RNVC: 2

19 May 2006

5340-33-102-5904
Retaining Strap

331025904
257-B: RNCC: 3 | RNVC: 2

25 Jul 1995

5340-33-154-5681
Mending Plate

331545681
731748: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-200-3266
Access Cover

332003266
223571526-01: RNCC: 3 | RNVC: 2
223571526-01: RNCC: 5 | RNVC: 2

18 Dec 2001

5340-33-106-4850
Rod End Clevis

331064850
7.462.011.0 - MEISA: RNCC: 3 | RNVC: 2

6 Mar 1998

5340-33-202-7699
Access Cover

332027699
INS0470/0091: RNCC: 3 | RNVC: 2

20 Oct 2003

5340-33-205-7140
Mounting Bracket

332057140
1025901970: RNCC: 3 | RNVC: 2
9743.100.0551: RNCC: 5 | RNVC: 2

1 Mar 2007

5340-33-161-5415
Door Handle

331615415
319266: RNCC: 3 | RNVC: 2
319266: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-1754
Loop Clamp

331071754
5975000050: RNCC: 3 | RNVC: 2

1 Jul 1999

5340-33-003-6072
Mounting Bracket

330036072
PFCR: RNCC: 3 | RNVC: 2

7 May 1998

5340-33-160-3849
Mounting Plate

331603849
95.592.699: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-0647
Block Clamp

330020647
KB-16.25: RNCC: 3 | RNVC: 2

7 Aug 1992

5340-33-115-9371
Access Cover

331159371
6.325.0.780.007.4: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-8976
Mending Plate

331558976
313417: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-157-7557
Angle Bracket

331577557
548523: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-105-1826
Mending Plate

331051826
19364-3: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-003-2939
Retaining Strap

330032939
721023852: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-156-5020
Loop Clamp

331565020
-17529-H8900: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-6587
Retaining Band

331546587
317860: RNCC: 3 | RNVC: 2
317860: RNCC: 5 | RNVC: 9

1 Oct 1990

5340-33-200-4016
Mounting Plate

332004016
CU 310 428 A: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-105-1160
Mending Plate

331051160
2 005 824 463: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-187-5555
Loop Clamp

331875555
0201617-8: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-0789
Plug Button

332050789
11342-15D00: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-33-181-5039
Loop Clamp

331815039
SS-06-0240G: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-000-1474
Detent Plunger

330001474
1005-001018: RNCC: 3 | RNVC: 2
WK-W 9033.010017: RNCC: 5 | RNVC: 2

13 Mar 1997

5340-33-001-6097
Retaining Strap

330016097
HD-1300-RAYAL-9: RNCC: 3 | RNVC: 2

15 Nov 1989

5340-33-188-8329
Door Closer

331888329
6102035: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-33-202-0298
Stand Base

332020298
1025-901459: RNCC: 3 | RNVC: 2

19 Dec 2002

5340-33-202-9180
Mounting Bracket

332029180
CBD50532P24: RNCC: 3 | RNVC: 2

28 Nov 2003

5340-33-002-9385
Lock Bolt

330029385
6314270274: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-001-3186
Retaining Strap

330013186
901050: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-001-4939
Compression Cup

330014939
92027601: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-003-3492
Mounting Bracket

330033492
901775: RNCC: 3 | RNVC: 2

25 Jun 1997

5340-33-108-2401
Mounting Plate

331082401
9644.250.0476: RNCC: 3 | RNVC: 2
2510006695: RNCC: 5 | RNVC: 2
2510006695: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-001-3554
Angle Bracket

330013554
92016703: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-116-8404
Mounting Plate

331168404
22 510: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-205-0539
Mounting Bracket

332050539
0405758: RNCC: 3 | RNVC: 2

18 Apr 2006

5340-33-160-6202
Mounting Bracket

331606202
79.03.097.559: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-115-9372
Access Cover

331159372
6.305.0.330.003.4: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-005-3624
Mounting Bracket

330053624
021.04.02.01-1: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-33-000-6684
Retaining Strap

330006684
570001: RNCC: 1 | RNVC: 2

7 Sep 1988

5340-33-190-5485
Access Cover

331905485
43188123-010: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-115-9118
Spring Tension Clip

331159118
36103-ZE1-000: RNCC: 3 | RNVC: 2

13 Nov 1992

5340-33-202-9861
Mounting Bracket

332029861
223551805-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-206-2120
Pad Eye

332062120
120-1077-04: RNCC: 3 | RNVC: 2

27 Sep 2007

5340-33-126-4089
Angle Bracket

331264089
F50036-V22-N11: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-145-5745
Pipe Hanger

331455745
85-551: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-6407
Bail Handle

330036407
6317650743: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-115-8152
Access Cover

331158152
92290217488: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-203-4995
Section Block Clamp

332034995
NN60873G01: RNCC: 3 | RNVC: 2

1 May 2004

5340-33-205-7342
Mounting Bracket

332057342
608ME101500: RNCC: 3 | RNVC: 2

6 Mar 2007

5340-33-107-1774
Loop Clamp

331071774
4730000490: RNCC: 3 | RNVC: 2
DIN 3016 D2 20X75 W1 2: RNCC: 4 | RNVC: 1

1 Jul 1999

5340-33-144-6350
Retaining Strap

331446350
G 501770: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-0553
Mechanical Stop

331030553
3-D-11: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-126-4353
Mounting Bracket

331264353
S22711-N501-W503: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-2526
Mounting Bracket

331612526
1055-000678: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-33-155-9165
Mounting Bracket

331559165
312488: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-154-6527
Loop Clamp

331546527
320355: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-203-4856
Webbing Strap

332034856
23184856000: RNCC: 3 | RNVC: 2

28 Apr 2004

5340-33-105-2576
Mounting Bracket

331052576
106.060AB: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-157-7867
Blank Panel

331577867
631414: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-6999
Loop Clamp

330006999
801639: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-005-3709
Metal Grille

330053709
SERIE 800: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-33-210-8711
Rim Lock

332108711
PCAMI/AC/ACTO42A/12/2: RNCC: 3 | RNVC: 2
USP-HK-2: RNCC: 5 | RNVC: 2

17 Mar 2013

5340-33-202-7702
Mounting Bracket

332027702
INS0470/0087: RNCC: 3 | RNVC: 2

20 Oct 2003

5340-33-001-1441
Angle Bracket

330011441
35-54301-0701: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-201-4226
Mounting Plate

332014226
A2810429-401: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-33-001-1873
Mounting Bracket

330011873
35-63685-0005: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-0640
Mounting Bracket

330010640
35-46284-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-157-8479
Angle Bracket

331578479
755130: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-4761
Access Cover

332014761
J52463000-001: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-116-0344
Locking Stay

331160344
BL-18124080: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-102-0317
Handle Grip

331020317
2510-000468: RNCC: 3 | RNVC: 2
411.097.7552: RNCC: 3 | RNVC: 2
2510000468: RNCC: 5 | RNVC: 2

6 Aug 1992

5340-33-103-2225
Mechanical Stop

331032225
1055-000008: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-158-8949
Loop Clamp

331588949
SS-06-0218G: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-2133
Mounting Bracket

330012133
35-72100-0101: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-204-5452
Threaded Rod End

332045452
35-25127-1903: RNCC: 3 | RNVC: 2

10 Oct 2005

5340-33-201-9479
Angle Bracket

332019479
A2812115-001: RNCC: 3 | RNVC: 2

20 Nov 2002

5340-33-001-1628
Mounting Bracket

330011628
35-61103-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-004-5186
Retaining Strap

330045186
AC-84246000: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-001-0846
Mounting Bracket

330010846
35-46513-0007: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-116-7046
Angle Bracket

331167046
22-A-128.130: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-1341
Mounting Bracket

330011341
35-53175-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-126-2311
Access Cover

331262311
H11930/2/29/1: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-33-126-5771
Rod End Connector

331265771
G5520AP-R-0450: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-182-0097
Angle Bracket

331820097
-79900072-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-202-9844
Mounting Bracket

332029844
223553704-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-201-1820
Access Cover

332011820
222433525-01: RNCC: 3 | RNVC: 2

28 May 2002

5340-33-001-0397
Mounting Bracket

330010397
35-46000-1101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-103-2417
Mounting Plate

331032417
1055-000329: RNCC: 3 | RNVC: 2

25 Jul 1995

5340-33-002-0663
Mounting Plate

330020663
TR-4022: RNCC: 3 | RNVC: 2

7 Aug 1992

5340-33-202-0221
Cushioning Pad

332020221
723591760-01: RNCC: 3 | RNVC: 2

16 Dec 2002

5340-33-201-4766
Access Cover

332014766
J52464010-404: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-203-1227
Access Cover

332031227
223551402-01: RNCC: 3 | RNVC: 2

2 Feb 2004

Load More Results