What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 39 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 39 of 39

5340-33-208-4970
Mending Plate

332084970
INS003112990080000: RNCC: 3 | RNVC: 2

27 Jul 2010

5340-33-103-4595
Dust And Moisture Seal Protective Cap

331034595
2086.135: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-3393
No Met Parachoques

332033393
5031470: RNCC: 3 | RNVC: 2

3 Mar 2004

5340-33-181-1195
No Metalico Tope

331811195
-46512-G9600: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-206-8670
Perforated Panel Accessory

332068670
MTOO21-CE500070-00/1-B: RNCC: 3 | RNVC: 2

29 Jul 2008

5340-33-156-2344
Double Angle Bracket

331562344
-25815-01C00: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-107-6551
Nut And Bolt Head Protective Cap

331076551
3404: RNCC: 3 | RNVC: 2

17 Mar 2000

5340-33-210-2949
Bumper

332102949
212-20013-1: RNCC: 3 | RNVC: 2

24 Jul 2012

5340-33-201-4734
Nut And Bolt Retainer

332014734
J57163530-001: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-201-1632
De Pres Abrazadera

5340-33-125-9362

5340-33-154-8452

5340-33-207-4383
Mounting Bracket

332074383
35-25984-0202A04: RNCC: 3 | RNVC: 2

13 Apr 2009

5340-33-160-3845
Spring Tension Clip

331603845
79.03.076.170: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-1872
Clip Retainer Plate

331071872
6319842561: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-188-8014
Headless Straight Rod

331888014
3 170 200A: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-000-4405
Nut And Bolt Locking Plate

330004405
521124: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-209-2174
Mounting Bracket

332092174
1025901949: RNCC: 3 | RNVC: 2
9743.100.0361: RNCC: 5 | RNVC: 2

27 Jul 2011

5340-33-156-2176
Double Angle Bracket

331562176
-95860-G9500: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-209-1527
Mounting Bracket

332091527
0750070650: RNCC: 3 | RNVC: 2

1 Jul 2011

5340-33-207-4619
Retaining Band

332074619
212-22157-08.3: RNCC: 3 | RNVC: 2

17 Apr 2009

5340-33-205-9709
Utility Resilient Mount

332059709
-56124-18000: RNCC: 3 | RNVC: 2

6 Jun 2007

5340-33-004-4380
Dust And Moisture Seal Protective Cap-Plug

330044380
87.19.02.CT.54: RNCC: 3 | RNVC: 2

26 Mar 1999

5340-33-107-1217
Dust And Moisture Seal Protective Cover

331071217
610100101: RNCC: 3 | RNVC: 2
PCAMI/RP/0361010011: RNCC: 6 | RNVC: 9

29 Jun 1999

5340-33-204-1322
Dust And Moisture Seal Protective Cap-Plug

332041322
525723003: RNCC: 3 | RNVC: 2
525723003: RNCC: 5 | RNVC: 2
9999-33-R29-4050: RNCC: 6 | RNVC: 9

6 Apr 2005

5340-33-209-0994
Electronic Equipment Hardware Kit

332090994
237CU100000: RNCC: 3 | RNVC: 2

9 Jun 2011

5340-33-208-0682
Mounting Plate

332080682
185062: RNCC: 3 | RNVC: 2

8 Feb 2010

5340-33-209-5108
Webbing Strap

332095108
5021206: RNCC: 3 | RNVC: 2
1.076.91.001: RNCC: 5 | RNVC: 2

16 Jan 2012

5340-33-209-6190
Access Cover

332096190
AU_1087_P3: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-33-207-0694
Access Cover

332070694
TP200598: RNCC: 3 | RNVC: 2

31 Oct 2008

5340-33-209-5502
Double Angle Bracket

332095502
0722160280: RNCC: 3 | RNVC: 2

17 Jan 2012

5340-33-155-0765
Seal Retaining Plate

331550765
12002-6: RNCC: 3 | RNVC: 2
120026: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-201-3517
Seal Retaining Plate

332013517
92492905521: RNCC: 3 | RNVC: 2

28 Jun 2002

5340-33-208-5480
Retaining Strap

332085480
1025901998: RNCC: 3 | RNVC: 2

22 Sep 2010

5340-33-209-6016
Corrosion Preventive Anode

332096016
Z-12N: RNCC: 3 | RNVC: 2

19 Jan 2012

5340-33-116-1845
Helical Compression Spring Seat

331161845
4 200 860: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-6455
Dust And Moisture Seal Boot

330046455
44124-D5500: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-002-9628
Window Regulator Handle

330029628
6317600202: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-204-6210
Cristal De Pantalla

332046210
5032739: RNCC: 3 | RNVC: 2

7 Nov 2005

5340-33-005-0564
Multiple Angle Bracket

330050564
NN60315P01: RNCC: 3 | RNVC: 2

13 Jun 2000

5340-33-125-7101
Dust And Moisture Seal Protective Cap

331257101
702007211: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-3132
Manual Control Handle

331563132
-32865-02B00: RNCC: 3 | RNVC: 2
-32865-Y9501: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-115-9711
Multiple Angle Bracket

331159711
9.987.1.653.003.4: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-7224
Mending Plate

332077224
5049181: RNCC: 3 | RNVC: 2

16 Sep 2009

5340-33-206-3982
Helical Compression Spring Seat

332063982
XX-000019011400: RNCC: 3 | RNVC: 2
000019011400: RNCC: 5 | RNVC: 2

18 Dec 2007

5340-33-001-8817
Fijacion Motor

330018817
325.9.920: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-106-3875
Dust And Moisture Seal Boot

331063875
411.096.6605: RNCC: 3 | RNVC: 2
TC3-096.6605: RNCC: 5 | RNVC: 2
2510000036: RNCC: 5 | RNVC: 2

3 Dec 1997

5340-33-001-6703
Turnbuckle Body

330016703
35-22040-3701: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-209-0122
Dust And Moisture Seal Protective Plug

332090122
10-20000-0201: RNCC: 3 | RNVC: 2

24 May 2011

5340-33-210-6758
Mounting Plate

332106758
1071.755-01: RNCC: 3 | RNVC: 2

20 Dec 2012

5340-33-207-1847
Rod End Clevis

332071847
10-61220-1201: RNCC: 3 | RNVC: 2

8 Jan 2009

5340-33-202-5633
Dust And Moisture Seal Protective Cap-Plug

332025633
95-82263-0401: RNCC: 3 | RNVC: 2

19 Aug 2003

5340-33-207-8259
Mechanical Stop

332078259
DF 306 324 A: RNCC: 3 | RNVC: 2

27 Oct 2009

5340-33-116-8041
Manual Control Handle

331168041
01.00724/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-6831
Dust And Moisture Seal Protective Cap-Plug

332046831
PS-610326: RNCC: 3 | RNVC: 2

5 Dec 2005

5340-33-208-5428
Mounting Bracket

332085428
XX-424108000600: RNCC: 3 | RNVC: 2
424108000600: RNCC: 5 | RNVC: 2
717331182009: RNCC: 6 | RNVC: 9

17 Sep 2010

5340-33-207-6926
Mounting Plate

332076926
5042951: RNCC: 3 | RNVC: 2
1.141.72.004: RNCC: 5 | RNVC: 2

11 Aug 2009

5340-33-102-5898
Dust And Moisture Seal Protective Cap

331025898
452-F: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-1489
Bow Handle

332041489
064-02.01.05.03: RNCC: 3 | RNVC: 2

14 Apr 2005

5340-33-207-7927
Dust And Moisture Seal Protective Cap-Plug

332077927
95-66635-0001: RNCC: 3 | RNVC: 2

19 Oct 2009

5340-33-207-8751
Bumper

332078751
95-94507-0302: RNCC: 3 | RNVC: 2

12 Nov 2009

5340-33-207-2765
Webbing Strap

332072765
PS-912320: RNCC: 3 | RNVC: 2

17 Feb 2009

5340-33-201-4659
Double Angle Bracket

332014659
J57165870-003: RNCC: 3 | RNVC: 2

30 Jul 2002

5340-33-208-3867
Angle Bracket

332083867
V0AN12PT2A1: RNCC: 3 | RNVC: 2
CA-150/15A-3134: RNCC: 5 | RNVC: 2
BAV0AN12PT2A1SE: RNCC: 5 | RNVC: 2

4 May 2010

5340-33-181-9570
Dust And Moisture Seal Protective Cap

331819570
-37536561: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-203-9676
Mechanic Equipment Hardware Kit

332039676
WQ 410 215-T: RNCC: 3 | RNVC: 2
520.21.10: RNCC: 5 | RNVC: 2

28 Jan 2005

5340-33-210-7593
Escutcheon Plate

332107593
212-85182-04-1: RNCC: 3 | RNVC: 2

3 Feb 2013

5340-33-209-1849
Dust And Moisture Seal Protective Cover

332091849
0750017700: RNCC: 3 | RNVC: 2

13 Jul 2011

5340-33-203-4814
Utility Access Door

332034814
EBO23.08.03-A: RNCC: 3 | RNVC: 2

23 Apr 2004

5340-33-106-0848
Window Regulator Handle

331060848
680929: RNCC: 3 | RNVC: 2

18 Mar 1997

5340-33-203-3543
Helical Compression Spring Retainer

332033543
M.A.S. 841-25.15-9: RNCC: 3 | RNVC: 2

5 Mar 2004

5340-33-208-9662
Webbing Strap

332089662
ABS-2-01418 6650/2800MM: RNCC: 3 | RNVC: 2

19 May 2011

5340-33-210-0570
Access Cover

332100570
399083001: RNCC: 3 | RNVC: 2
399083001: RNCC: 5 | RNVC: 2

14 May 2012

5340-33-206-5301
Mounting Bracket

332065301
WW 258 012 AU: RNCC: 3 | RNVC: 2

20 Feb 2008

5340-33-207-6411
Mounting Plate

332076411
R0095962: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-209-8043
Access Cover

332098043
H081 4143: RNCC: 3 | RNVC: 2

7 Mar 2012

5340-33-206-9890
Angle Bracket

332069890
TP251147: RNCC: 3 | RNVC: 2

3 Oct 2008

5340-33-160-7555
Dust And Moisture Seal Protective Cap-Plug

331607555
79.03.074.099: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-160-3856
Spring Tension Clip

331603856
26.198.259: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-6571
Hand Crank

330026571
H-7426-5: RNCC: 3 | RNVC: 2

15 Jun 1995

5340-33-203-9340
Double Angle Bracket

332039340
PS-401077: RNCC: 3 | RNVC: 2

24 Jan 2005

5340-33-209-4729
Mechanical Stop

332094729
0664.20.6000.35: RNCC: 3 | RNVC: 2

29 Dec 2011

5340-33-210-4045
Latch Bar

332104045
236909: RNCC: 3 | RNVC: 2

28 Sep 2012

5340-33-207-3319
Dust And Moisture Seal Protective Plug

332073319
35-21009-0701: RNCC: 3 | RNVC: 2

5 Mar 2009

5340-33-210-1711
Multiple Angle Bracket

332101711
TOM0201115: RNCC: 3 | RNVC: 2

15 Jun 2012

5340-33-208-7765
Webbing Strap

332087765
235-HK3-50+233-50 1800/600: RNCC: 3 | RNVC: 2

21 Feb 2011

5340-33-204-9885
Dust And Moisture Seal Protective Plug

332049885
FC-5MAS: RNCC: 3 | RNVC: 2

23 Mar 2006

5340-33-003-4398
Hand Carrying Strap Assembly

330034398
SP-00388: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-190-5564
Sealing Plug Assembly

331905564
K299519: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-160-6091
Manual Control Handle

331606091
95.594.200: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-1075
Spring Tension Clip

331061075
631 984 23 61: RNCC: 3 | RNVC: 2

18 Mar 1997

5340-33-200-7481
Mechanic Equipment Hardware Kit

332007481
7356.252.2880: RNCC: 3 | RNVC: 2
BMR2137: RNCC: 5 | RNVC: 2

6 Mar 2002

5340-33-106-1508
Manual Control Lever

331061508
6.437.330.0 - MEISA: RNCC: 3 | RNVC: 2

14 May 1997

5340-33-210-5019
Corrosion Preventive Anode

332105019
Z-1B: RNCC: 3 | RNVC: 2

18 Oct 2012

5340-33-003-1127
Dust And Moisture Seal Protective Cap

330031127
R-2310-8: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-208-4019
Access Cover

332084019
CSA-07020018-11C-A00: RNCC: 3 | RNVC: 2

13 May 2010

5340-33-001-1738
Ball

330011738
35-61393-0101: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-208-6956
Access Cover

332086956
2510.904768: RNCC: 3 | RNVC: 2
9644.251.4210: RNCC: 5 | RNVC: 2

17 Dec 2010

5340-33-210-9452
Mechanic Equipment Hardware Kit

332109452
37-13100-0001: RNCC: 3 | RNVC: 2

13 Apr 2013

5340-33-208-7106
Webbing Strap

332087106
235-HK3-50+232-50 1550/600: RNCC: 3 | RNVC: 2

10 Jan 2011

5340-33-116-2651
Union Placa

5340-33-116-2871
Muelle Helico Reten

5340-33-000-3024
Hand Crank

330003024
4925-000015: RNCC: 3 | RNVC: 2

8 Sep 1987

5340-33-209-7422
Access Cover

332097422
82545060: RNCC: 3 | RNVC: 2

16 Feb 2012

5340-33-209-6259
Lever Bracket

332096259
0750039501: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-33-206-5127
Mounting Plate

332065127
0555003800: RNCC: 3 | RNVC: 2

12 Feb 2008

5340-33-208-4774
Mortise Bolt

332084774
95-22198-0101: RNCC: 3 | RNVC: 2

12 Jul 2010

5340-33-102-0060
Nut And Bolt Locking Plate

331020060
2510-000055: RNCC: 3 | RNVC: 2
2510000055: RNCC: 5 | RNVC: 2
411.097.0309: RNCC: 5 | RNVC: 2

6 Aug 1992

5340-33-003-2891
Mechanic Equipment Hardware Kit

330032891
221023925: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-207-2239
T Bracket

332072239
10-A310505-0001: RNCC: 3 | RNVC: 2

22 Jan 2009

5340-33-202-5261
Dust And Moisture Seal Protective Cap

332025261
MHC2150190: RNCC: 3 | RNVC: 2
MHC1150190: RNCC: 5 | RNVC: 2
MHC1150290: RNCC: 5 | RNVC: 2
MHC2150290: RNCC: 5 | RNVC: 2

4 Aug 2003

5340-33-158-1885
Dust And Moisture Seal Boot

331581885
625474: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-7851
Double Angle Bracket

331167851
01.08040/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-208-2062
Access Cover

332082062
P0BT81TT0H1: RNCC: 3 | RNVC: 2
BT-LV90T-1510.2: RNCC: 5 | RNVC: 2
BAP0BT81TT0H1SE: RNCC: 5 | RNVC: 2
BT-LV80T-1510.2: RNCC: 5 | RNVC: 2

26 Mar 2010

5340-33-208-7785
Mounting Bracket

332087785
D0931461946: RNCC: 3 | RNVC: 2

21 Feb 2011

5340-33-206-6910
Mounting Plate

332066910
1000021546: RNCC: 3 | RNVC: 2

5 May 2008

5340-33-103-4941
Double Angle Bracket

331034941
9234 EI 24400 PL: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-9869
Double Angle Bracket

331039869
722011007: RNCC: 3 | RNVC: 2

3 Jan 1995

5340-33-102-4008
Dust And Moisture Seal Protective Plug

331024008
42610001081: RNCC: 3 | RNVC: 2
42610001081: RNCC: 3 | RNVC: 2
MD51-5-12: RNCC: 5 | RNVC: 2
MD51-5-12: RNCC: 5 | RNVC: 2

22 Sep 1995

5340-33-207-1461
Double Angle Bracket

332071461
980642: RNCC: 3 | RNVC: 2

2 Dec 2008

5340-33-206-8312
Mounting Bracket

332068312
150.545-100.40.10.01: RNCC: 3 | RNVC: 2

15 Jul 2008

5340-33-200-7103
Handwheel

332007103
IN-050A-MV01I.32: RNCC: 3 | RNVC: 2

1 Mar 2002

5340-33-204-2883
Butt Hinge Leaf

332042883
PCAMI/RP/07000000000851: RNCC: 3 | RNVC: 2

10 Jun 2005

5340-33-208-4412
Mounting Plate

332084412
35-A1105-0101: RNCC: 3 | RNVC: 2

24 Jun 2010

5340-33-208-7655
Bumper

332087655
1371.05.2000.04: RNCC: 3 | RNVC: 2

14 Feb 2011

5340-33-207-5725
Mounting Bracket

332075725
A05901: RNCC: 3 | RNVC: 2

29 Jun 2009

5340-33-204-3431
No Metalico Tope

332043431
50140-00000: RNCC: 3 | RNVC: 2

18 Jul 2005

5340-33-201-5552
Spacing Threaded Standoff

332015552
723591764-01: RNCC: 3 | RNVC: 2

3 Sep 2002

5340-33-160-3281
Hand Crank

331603281
GP-S-170/13: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-9806
Helical Compression Spring Retainer

330009806
35-21216-0301: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-206-3009
Spring Tension Clip

332063009
48425 11H00: RNCC: 3 | RNVC: 2
48425-11H00: RNCC: 5 | RNVC: 2

31 Oct 2007

5340-33-126-0347
Abrazadera Enganche

5340-33-126-1607
Acceso Tapa

5340-33-126-1605
Acceso Tapa

5340-33-126-3082
Sujecion Brida

5340-33-125-8035
Acceso Tapa

5340-33-114-4894

5340-33-001-1912
Dust And Moisture Seal Protective Cap-Plug

330011912
35-65147-0301: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-208-6922
Mounting Plate

332086922
J92563810-704: RNCC: 3 | RNVC: 2

14 Dec 2010

5340-33-208-4861
Retaining Strap

332084861
J92563750-403: RNCC: 3 | RNVC: 2

21 Jul 2010

5340-33-204-1777
Dust And Moisture Seal Protective Cap-Plug

332041777
PCAMI/RP/04000000000915: RNCC: 3 | RNVC: 2

26 Apr 2005

5340-33-210-1720
Double Angle Bracket

332101720
TOM0819914P01: RNCC: 3 | RNVC: 2

15 Jun 2012

5340-33-206-7711
Mounting Plate

332067711
PS-902999: RNCC: 3 | RNVC: 2

13 Jun 2008

5340-33-208-6520
Corner Brace

332086520
363000103-001: RNCC: 3 | RNVC: 2

24 Nov 2010

5340-33-206-0132
Utility Resilient Mount

332060132
K3221042: RNCC: 3 | RNVC: 2
180-1-22-705: RNCC: 5 | RNVC: 2
9999-33-R90-2119: RNCC: 6 | RNVC: 9

21 Jun 2007

5340-33-210-4560
Bumper

332104560
212-20029-1: RNCC: 3 | RNVC: 2

5 Oct 2012

5340-33-210-0612
Webbing Strap

332100612
ABS-2 01155 1000/300: RNCC: 3 | RNVC: 2

18 May 2012

5340-33-209-6233
Mounting Plate

332096233
0750030841: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-33-209-6237
Mounting Plate

332096237
0750031951: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-33-203-3258
Spring Tension Clip

332033258
207-8041-1352: RNCC: 3 | RNVC: 2

27 Feb 2004

5340-33-160-2822
Sujecion Brida

5340-33-126-9868
Sujecion Brida

5340-33-188-8954
Juego Perno Y Espac

5340-33-107-1235
Flush Lock

331071235
610103221: RNCC: 3 | RNVC: 2
PCAMI/RP/0310103221: RNCC: 6 | RNVC: 9

29 Jun 1999

5340-33-209-1702
Swivel Caster

332091702
2-1845: RNCC: 3 | RNVC: 2
10TVFD150-HUB: RNCC: 5 | RNVC: 2
TV-2-1845: RNCC: 5 | RNVC: 2

7 Jul 2011

5340-33-209-0108
Mounting Bracket

332090108
AGC028136HTL: RNCC: 3 | RNVC: 2

24 May 2011

5340-33-160-3020
Acceso Tapa

5340-33-206-6972
Access Cover

332066972
53201-99221114-01: RNCC: 3 | RNVC: 2

7 May 2008

5340-33-210-4800
Bow Handle

332104800
212-21173-18-1: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-33-207-3345
Mechanical Stop

332073345
35-22988-0003: RNCC: 3 | RNVC: 2

5 Mar 2009

5340-33-114-5051
Helical Compression Spring Retainer

331145051
5TG 4-39: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-114-4862
Luggage Handle

331144862
5.50 TTG-39: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-208-6034
Safety Cable Kit

332086034
R0115213: RNCC: 3 | RNVC: 2

21 Oct 2010

5340-33-201-3974
Double Angle Bracket

332013974
A2810478-001: RNCC: 3 | RNVC: 2

5 Jul 2002

5340-33-181-1144
Dust And Moisture Seal Protective Cap

331811144
-74500028-1: RNCC: 3 | RNVC: 2
-74500028-2: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-1445
Dust And Moisture Seal Protective Cap-Plug

332011445
113-0004-04: RNCC: 3 | RNVC: 2

16 May 2002

5340-33-210-4562
Cover Strip

332104562
212-21141-12-2: RNCC: 3 | RNVC: 2

5 Oct 2012

5340-33-209-3558
Mechanical Stop

332093558
MAM-XFRE-04-00-11: RNCC: 3 | RNVC: 2

21 Nov 2011

5340-33-208-7628
Access Cover

332087628
TAP-0003: RNCC: 3 | RNVC: 2

9 Feb 2011

5340-33-106-4512
Spring Tension Clip

331064512
-01281-00551: RNCC: 3 | RNVC: 2

9 Feb 1998

5340-33-102-0445
Manual Control Handle

331020445
2510-000170: RNCC: 3 | RNVC: 2
2510000170: RNCC: 5 | RNVC: 2
411.096.6616: RNCC: 5 | RNVC: 2

5 Jul 1995

5340-33-206-0130
Utility Resilient Mount

332060130
K3221040: RNCC: 3 | RNVC: 2
180-1-151-735: RNCC: 5 | RNVC: 2
9999-33-R90-2117: RNCC: 6 | RNVC: 9

21 Jun 2007

5340-33-106-8516
Luggage Handle

331068516
PCAMI/RP/2400000106: RNCC: 3 | RNVC: 2

5 Apr 1999

5340-33-210-0610
Webbing Strap

332100610
5700-25+5726-25 800/400: RNCC: 3 | RNVC: 2

18 May 2012

5340-33-201-3982
Double Angle Bracket

332013982
A2811396-003: RNCC: 3 | RNVC: 2

5 Jul 2002

5340-33-208-8233
Mounting Plate

332088233
0750229020: RNCC: 3 | RNVC: 2

10 Mar 2011

5340-33-202-9216
Orificios Mu Placa

332029216
CBD57500P62: RNCC: 3 | RNVC: 2

1 Dec 2003

5340-33-116-1351
Dust And Moisture Seal Protective Cap

331161351
BA-13225000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-4180
Manual Control Lever

332074180
WW 386 509 AU: RNCC: 3 | RNVC: 2

1 Apr 2009

5340-33-161-1501
Tapa De Acces Placa

331611501
318112: RNCC: 3 | RNVC: 2

11 Dec 1992

5340-33-155-7830
Double Angle Bracket

331557830
5340001080: RNCC: 3 | RNVC: 2
318941: RNCC: 3 | RNVC: 2
318941: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-205-5351
Utility Resilient Mount

332055351
013-6060D: RNCC: 3 | RNVC: 2

5 Dec 2006

5340-33-104-6444
Multiple Angle Bracket

331046444
10.12.12.0240.0: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-33-158-5579
Dust And Moisture Seal Protective Cap

331585579
-60088184-K91: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-1239
Pletina Cerrojo

331071239
610103402: RNCC: 3 | RNVC: 2
PCAMI/RP/0361010342: RNCC: 6 | RNVC: 9

29 Jun 1999

5340-33-205-3429
Snap-In Plain Standoff

332053429
EN 222109-252: RNCC: 3 | RNVC: 2

17 Aug 2006

5340-33-160-3669
Dust And Moisture Seal Protective Plug

331603669
FC-4031: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-5304
Block Clamp

332075304
95-43252-0001: RNCC: 3 | RNVC: 2

2 Jun 2009

5340-33-208-7109
Webbing Strap

332087109
235-VH3-50+232-50 1800/450: RNCC: 3 | RNVC: 2

10 Jan 2011

5340-33-207-6807
Expansion Shield

332076807
25104: RNCC: 3 | RNVC: 2

4 Aug 2009

5340-33-103-1881
Manguito Union

331031881
2520-000113: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-210-7783
Retaining Band

332107783
CAN68280-041-01: RNCC: 3 | RNVC: 2

8 Feb 2013

5340-33-209-2062
Runner

332092062
0661.10.1500.00: RNCC: 3 | RNVC: 2

20 Jul 2011

5340-33-161-6687
Helical Compression Spring Retainer

331616687
975-A-15: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-205-0733
Spring Tension Clip

332050733
34938-14D30: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-33-209-8408
Retaining Strap

332098408
2388-41770-00: RNCC: 3 | RNVC: 2

15 Mar 2012

5340-33-209-1189
Webbing Strap

332091189
SRC500006-501: RNCC: 3 | RNVC: 2

16 Jun 2011

5340-33-001-0040
Double Angle Bracket

330010040
35-32340-0203: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-208-7956
Runner Assy

332087956
35-94244-0004: RNCC: 3 | RNVC: 2

1 Mar 2011

5340-33-002-1744
Hinge

330021744
35-31192-0007A01: RNCC: 3 | RNVC: 2

12 Jul 1993

5340-33-210-0608
Webbing Strap

332100608
5700-25 3500: RNCC: 3 | RNVC: 2

18 May 2012

5340-33-187-2696
Nonmetallic Solid Wheel

331872696
329/260: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-208-9735
Key Chain And Reel

332089735
2030-32: RNCC: 3 | RNVC: 2

20 May 2011

5340-33-004-2138
Spring Tension Clip

330042138
-01241-00481: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-208-1070
Mounting Plate

332081070
HC001-1: RNCC: 3 | RNVC: 2
HC001-10-00-00: RNCC: 5 | RNVC: 2

23 Feb 2010

5340-33-102-0401
Dust And Moisture Seal Boot

331020401
2510-000163: RNCC: 3 | RNVC: 2
2510000163: RNCC: 5 | RNVC: 2
411.097.0036: RNCC: 5 | RNVC: 2

6 Aug 1992

5340-33-202-4892
Casquillo Union

332024892
2.135.043-A: RNCC: 3 | RNVC: 2
5033569: RNCC: 5 | RNVC: 2

14 Jul 2003

5340-33-210-1921
Loop Clamp

332101921
20121: RNCC: 3 | RNVC: 2
MIL-S-2319E: RNCC: 4 | RNVC: 1

21 Jun 2012

5340-33-005-2620
Metalico Tope

330052620
35-25151-0301: RNCC: 3 | RNVC: 2

20 Mar 2001

5340-33-210-5728
Dust And Moisture Seal Protective Plug

332105728
35-94395-0901: RNCC: 3 | RNVC: 2

23 Nov 2012

5340-33-200-2460
Arret Tendeur

332002460
135186: RNCC: 3 | RNVC: 2

19 Nov 2001

5340-33-106-1812
Double Angle Bracket

331061812
N1010202: RNCC: 3 | RNVC: 2

18 Jun 1997

5340-33-001-4686
Double Angle Bracket

330014686
92026649: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-203-7573
Manual Control Handle

332037573
223107000713: RNCC: 3 | RNVC: 2
PCAMI/RP/08223107000713: RNCC: 5 | RNVC: 1
PCAMI/RP/08PRI610001082: RNCC: 5 | RNVC: 1

18 Sep 2004

5340-33-210-6417
Multiple Angle Bracket

332106417
TP252660: RNCC: 3 | RNVC: 2

4 Dec 2012

5340-33-106-8102
Double Angle Bracket

331068102
REM-200-6-2-5: RNCC: 3 | RNVC: 2

31 Mar 1999

5340-33-102-1903
Hand Crank

331021903
32330000120: RNCC: 3 | RNVC: 2
MCL-3-7/33: RNCC: 3 | RNVC: 2
32330000120: RNCC: 3 | RNVC: 2
MCL-3-7/33: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-208-6988
Butt Hinge

332086988
242000102-001: RNCC: 3 | RNVC: 2

23 Dec 2010

5340-33-107-2415
Dust And Moisture Seal Protective Plug

331072415
SS-18-0095A: RNCC: 3 | RNVC: 2

14 Sep 1999

5340-33-106-7741
Multiple Angle Bracket

331067741
52234-1: RNCC: 3 | RNVC: 2

15 Mar 1999

5340-33-002-1844
Abrazadera

330021844
700512: RNCC: 3 | RNVC: 2
5340000634: RNCC: 5 | RNVC: 2
5340-000634: RNCC: 5 | RNVC: 2
OL-700512: RNCC: 5 | RNVC: 2

13 Jul 1993

5340-33-004-6108
Spring Tension Clip

330046108
85.10.CT.58: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-33-207-6786
Butt Hinge Leaf

332076786
35-22962-0601: RNCC: 3 | RNVC: 2

4 Aug 2009

5340-33-206-8466
Turnbuckle Body

332068466
10-62302-0201: RNCC: 3 | RNVC: 2

17 Jul 2008

5340-33-208-0722
Mounting Bracket

332080722
PN09-0017-M017: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-33-107-2849
Dust And Moisture Seal Protective Plug

331072849
122051: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-33-154-0294
Helical Compression Spring Seat

331540294
812311: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-211-4093
Nonmetallic Solid Wheel

332114093
EP.63640-RFR-1: RNCC: 3 | RNVC: 2

23 Oct 2013

5340-33-204-8253
Seal Retaining Plate

332048253
J57167165-003: RNCC: 3 | RNVC: 2

7 Feb 2006

5340-33-181-1134
Dust And Moisture Seal Protective Plug

331811134
-01648-00224: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-202-2072
Double Angle Bracket

332022072
NN60725G01: RNCC: 3 | RNVC: 2

25 Feb 2003

5340-33-103-1602
Manual Control Lever

331031602
1005-004406: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-7582
Bumper

332077582
150.503-250.205: RNCC: 3 | RNVC: 2
150503CBAD7J: RNCC: 5 | RNVC: 2

2 Oct 2009

5340-33-202-9890
Lower Clamp Assembl

332029890
223552108-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-206-7692
Retaining Clip

332067692
PS-060006: RNCC: 3 | RNVC: 2

12 Jun 2008

5340-33-103-7798
Flush Lock

331037798
BN-61975: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-005-2581
Dust And Moisture Seal Protective Cap-Plug

330052581
CE500070-1201: RNCC: 3 | RNVC: 2

16 Mar 2001

5340-33-106-4806
Dust And Moisture Seal Protective Plug

331064806
3000100: RNCC: 3 | RNVC: 2
ALMCTI-1000003000100: RNCC: 5 | RNVC: 1

6 Mar 1998

5340-33-205-5304
Utility Resilient Mount

332055304
V3CA 8080-01: RNCC: 3 | RNVC: 2
W269520000002: RNCC: 5 | RNVC: 2

4 Dec 2006

5340-33-208-0756
Angle Bracket

332080756
PN09-1107-M021: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-33-207-1659
Elastic Strap

332071659
NGSG14266-1: RNCC: 3 | RNVC: 2

12 Dec 2008

5340-33-206-5406
Packaging Container Fastener

332065406
C-007/N: RNCC: 3 | RNVC: 2

26 Feb 2008

5340-33-103-1736
Helical Compression Spring Retainer

331031736
1005-004416: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-005-3985
No Metalico Tope

330053985
SEGOQUI-20/10-06: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-33-102-5900
Dust And Moisture Seal Protective Cap-Plug

331025900
662-H: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-102-1270
Hand Crank

331021270
112234-W: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-33-201-3963
Double Angle Bracket

332013963
A2810463-001: RNCC: 3 | RNVC: 2

5 Jul 2002

5340-33-203-7559
Spacing Threaded Standoff

332037559
33206-94510-0301: RNCC: 3 | RNVC: 2

17 Sep 2004

5340-33-200-4562
Base Frame Cover Pl

332004562
112.53.00: RNCC: 3 | RNVC: 2

29 Jan 2002

5340-33-181-6345
Double Angle Bracket

331816345
-01700409-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-158-3603
Manual Control Handle

331583603
-07105104-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-0837
Helical Compression Spring Seat

332110837
CE200752-0201: RNCC: 3 | RNVC: 2

6 Jun 2013

5340-33-156-3289
Window Regulator Handle

331563289
-80760-13R00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-1979
Manual Control Lever

331031979
2590-000105: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-8446
Mando Nivelacion

331038446
9505-3-5-00: RNCC: 3 | RNVC: 2

12 Sep 1995

5340-33-155-7836
Double Angle Bracket

331557836
730680: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-005-0605
Double Angle Bracket

330050605
NN60197G01: RNCC: 3 | RNVC: 2

13 Jun 2000

5340-33-208-4913
Bumper

332084913
95-82101-0103: RNCC: 3 | RNVC: 2

23 Jul 2010

5340-33-203-5431
Dust And Moisture Seal Protective Cap

332035431
2736.01.33: RNCC: 3 | RNVC: 2
PCAMI/RP/4800027360133: RNCC: 5 | RNVC: 2

19 May 2004

5340-33-210-4842
Dust And Moisture Seal Protective Plug

332104842
212-21218-3: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-33-001-1719
Plate

330011719
35-61356-0103: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-210-7859
Mounting Bracket

332107859
10-23200-1501: RNCC: 3 | RNVC: 2

8 Feb 2013

5340-33-202-9061
No Met Parachoques

332029061
723551737-01: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-202-9829
Conjunto Abrazadera

332029829
223552109-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-157-7038
Helical Compression Spring Seat

331577038
191267: RNCC: 3 | RNVC: 2
4139320009: RNCC: 3 | RNVC: 2
191267: RNCC: 3 | RNVC: 2
12-315-6847: RNCC: 6 | RNVC: 9

24 Jul 1995

5340-33-208-4444
Mounting Bracket

332084444
5052115: RNCC: 3 | RNVC: 2

25 Jun 2010

5340-33-202-5579
Seal Retaining Plate

332025579
95-11543-0001: RNCC: 3 | RNVC: 2

19 Aug 2003

5340-33-102-1739
Manual Control Handle

331021739
MC51-1-44: RNCC: 3 | RNVC: 2
MC51-1-44: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-207-8714
Retaining Strap

332078714
J28265166-001: RNCC: 3 | RNVC: 2

11 Nov 2009

5340-33-103-8443
Mando En Direccion

331038443
9505-3-2-00: RNCC: 3 | RNVC: 2

12 Sep 1995

5340-33-203-5383
Manual Control Handle

332035383
CLT0348-10: RNCC: 3 | RNVC: 2

11 May 2004

5340-33-208-5748
Mounting Bracket

332085748
95-82263-0601: RNCC: 3 | RNVC: 2

5 Oct 2010

5340-33-201-9843
Manual Control Handle

332019843
223591321-01: RNCC: 3 | RNVC: 2

5 Dec 2002

5340-33-107-0093
Dust And Moisture Seal Protective Cap

331070093
PCAMI/RP/0700000214: RNCC: 3 | RNVC: 2

25 May 1999

5340-33-204-7567
Utility Resilient Mount

332047567
5038096: RNCC: 3 | RNVC: 2
3.066.11.046-A45: RNCC: 5 | RNVC: 2

10 Jan 2006

5340-33-202-9014
Dust And Moisture Seal Protective Cover

332029014
723551351-01: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-209-5647
Mounting Bracket

332095647
0738050240: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-33-209-7338
Leather Strap

332097338
35-83203-0001: RNCC: 3 | RNVC: 2

15 Feb 2012

5340-33-116-7850
Double Angle Bracket

331167850
01.08041/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-208-8266
Casement Fastener

332088266
0406: RNCC: 3 | RNVC: 2

11 Mar 2011

5340-33-004-2878
Headless Grooved Rod

330042878
PCAMI/RP/0306126113/N: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-203-8718
Dust And Moisture Seal Protective Cap-Plug

332038718
35-94011-1301: RNCC: 3 | RNVC: 2

14 Dec 2004

5340-33-204-2937
Extension Drawer Slide

332042937
PCAMI/RP/06100433010012: RNCC: 3 | RNVC: 2

17 Jun 2005

5340-33-207-7213
Threaded Rod End

332077213
35-81296-0101: RNCC: 3 | RNVC: 2

16 Sep 2009

5340-33-204-6278
Dust And Moisture Seal Protective Cover

332046278
PS-210067: RNCC: 3 | RNVC: 2

8 Nov 2005

5340-33-210-5909
Clamp Bolt Assembly

332105909
35-72675-0001: RNCC: 3 | RNVC: 2

26 Nov 2012

5340-33-003-7819
Tope Cuna

330037819
1055-001734: RNCC: 3 | RNVC: 2

9 Jun 1998

5340-33-102-1692
Spring Holder

331021692
42120000150: RNCC: 3 | RNVC: 2
MB57-1-15: RNCC: 3 | RNVC: 2
42120000150: RNCC: 3 | RNVC: 2
MB57-1-15: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-003-5040
Metalico Tope

330035040
R-106: RNCC: 3 | RNVC: 2
17364336: RNCC: 5 | RNVC: 2

12 Nov 1997

5340-33-201-0047
No Metalico Tope

332010047
2530000400: RNCC: 3 | RNVC: 2
2530000400: RNCC: 5 | RNVC: 2

22 Apr 2002

5340-33-209-8115
Turnbuckle

332098115
40-7/16 GANCHO-CANCAMO: RNCC: 3 | RNVC: 2

7 Mar 2012

5340-33-208-7405
Buckle

332087405
BLS25 NB: RNCC: 3 | RNVC: 2
BLS25: RNCC: 5 | RNVC: 2
S NK FA-010-100-6047: RNCC: 5 | RNVC: 2

25 Jan 2011

5340-33-210-7477
Mounting Bracket

332107477
10-11300-0103: RNCC: 3 | RNVC: 2

3 Feb 2013

5340-33-114-4994
Helical Compression Spring Retainer

331144994
5TG 2-12: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-190-5571
Sealing Plug Assembly

331905571
R43176755-005: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-190-5568
Sealing Plug Assembly

331905568
K43164071-002: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-160-3880
No Metalico Tope

331603880
AY 644-121: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-0373
Support Hook

332070373
IB-130-AL-0210: RNCC: 3 | RNVC: 2
IBERC-020.0200: RNCC: 5 | RNVC: 2
9999-33-R25-9786: RNCC: 6 | RNVC: 9

21 Oct 2008

5340-33-001-1151
Manual Control Handle

330011151
35-49104-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-208-6460
Butt Hinge Leaf

332086460
95-82227-0101: RNCC: 3 | RNVC: 2

19 Nov 2010

5340-33-201-1462
Dust And Moisture Seal Protective Cover

332011462
MAM-U-21-01-01: RNCC: 3 | RNVC: 2

16 May 2002

5340-33-207-7327
Mounting Bracket

332077327
35-72264-0001: RNCC: 3 | RNVC: 2

22 Sep 2009

5340-33-208-9664
Webbing Strap

332089664
ABS-2-01201-01253: RNCC: 3 | RNVC: 2

19 May 2011

5340-33-207-6014
Metal Grille

332076014
DF 410 049 AX: RNCC: 3 | RNVC: 2

9 Jul 2009

5340-33-206-5363
Padlock

332065363
551-35-BL: RNCC: 3 | RNVC: 2

21 Feb 2008

5340-33-001-6204
Cubierta Guardapolv

330016204
TIPO-H2: RNCC: 3 | RNVC: 2

15 Nov 1989

5340-33-209-3859
Track Stop

332093859
0738001420: RNCC: 3 | RNVC: 2

30 Nov 2011

5340-33-206-2926
Manual Control Handle

332062926
XX-000000062600: RNCC: 3 | RNVC: 2
000000062600: RNCC: 5 | RNVC: 2

26 Oct 2007

5340-33-208-4068
Mounting Bracket

332084068
2510011223: RNCC: 3 | RNVC: 2
COH-33974: RNCC: 5 | RNVC: 2

19 May 2010

5340-33-200-7113
Planetary P Bearing

332007113
IN-050A-MV01I.22: RNCC: 3 | RNVC: 2

1 Mar 2002

5340-33-209-6781
Access Cover

332096781
AU_027_P100: RNCC: 3 | RNVC: 2

31 Jan 2012

5340-33-103-2490
Manual Control Lever

331032490
1055-000516: RNCC: 3 | RNVC: 2

25 Jul 1995

5340-33-208-4914
Dust And Moisture Seal Protective Cap-Plug

332084914
95-81862-0001: RNCC: 3 | RNVC: 2

23 Jul 2010

5340-33-210-3703
Flush Catch

332103703
CAN66049-4-17: RNCC: 3 | RNVC: 2

25 Sep 2012

5340-33-156-2794
Window Regulator Handle

331562794
-80760-08M00: RNCC: 3 | RNVC: 2
-80760-C8200: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-7737
Double Angle Bracket

332017737
7055.412.0011: RNCC: 3 | RNVC: 2
2510701563: RNCC: 5 | RNVC: 2

22 Oct 2002

5340-33-210-2943
Butt Hinge Leaf

332102943
212-13500-17-1: RNCC: 3 | RNVC: 2

24 Jul 2012

5340-33-202-4888
Soporte Delantero

332024888
2.135.108-A: RNCC: 3 | RNVC: 2
5033479: RNCC: 5 | RNVC: 2

14 Jul 2003

5340-33-207-2901
Dust And Moisture Seal Protective Plug

332072901
95-82263-0701: RNCC: 3 | RNVC: 2

19 Feb 2009

5340-33-202-5171
Double Angle Bracket

332025171
222421712-01: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-33-005-1528
Seal Retaining Plate

330051528
CE600030-2001: RNCC: 3 | RNVC: 2

3 Nov 2000

5340-33-103-5316
Dust And Moisture Seal Protective Cap-Plug

331035316
9505-3-5-05: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-201-4672
Double Angle Bracket

332014672
J92666170-401: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-33-209-4042
Crank Handle

332094042
0738000240: RNCC: 3 | RNVC: 2

1 Dec 2011

5340-33-210-0614
Webbing Strap

332100614
ABS-2 01155 1300/300: RNCC: 3 | RNVC: 2

18 May 2012

5340-33-206-1505
Multiple Angle Bracket

332061505
PS-610578: RNCC: 3 | RNVC: 2

5 Sep 2007

5340-33-206-9060
Mounting Bracket

332069060
Q 4 2078 7013: RNCC: 3 | RNVC: 2

15 Sep 2008

5340-33-105-7549
Manual Control Lever

331057549
CMH95200-3/4-5: RNCC: 3 | RNVC: 2

1 Jun 1996

5340-33-126-5561
Spring Tension Clip

331265561
C22234-A1000-C1: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-207-8662
Manual Control Lever

332078662
CA99300-0003: RNCC: 3 | RNVC: 2

6 Nov 2009

5340-33-210-8099
Mounting Bracket

332108099
1071.500-01: RNCC: 3 | RNVC: 2

11 Feb 2013

5340-33-210-2937
Butt Hinge Leaf

332102937
212-13104-05-1: RNCC: 3 | RNVC: 2

24 Jul 2012

5340-33-201-9522
Dust And Moisture Seal Protective Cover

332019522
223591107-01: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-33-157-2127
Resilient Mount Plate

331572127
515914: RNCC: 3 | RNVC: 2
41100066: RNCC: 5 | RNVC: 9

11 Jul 1995

5340-33-201-3944
Multiple Angle Bracket

332013944
A2811102-003: RNCC: 3 | RNVC: 2

5 Jul 2002

5340-33-206-7004
Access Cover

332067004
150-551-685-164: RNCC: 3 | RNVC: 2
150-551-686-164: RNCC: 5 | RNVC: 2
150-551-687-164: RNCC: 5 | RNVC: 2
150-551-688-164: RNCC: 5 | RNVC: 2

7 May 2008

5340-33-207-4784
Mounting Bracket

332074784
35-51257-0003: RNCC: 3 | RNVC: 2

23 Apr 2009

5340-33-202-6252
Snap-In Threaded Standoff

332026252
9644.251.0267: RNCC: 3 | RNVC: 2
2510010011: RNCC: 5 | RNVC: 2
2510010011: RNCC: 5 | RNVC: 2

16 Sep 2003

5340-33-116-3723
Dust And Moisture Seal Protective Cap

331163723
2145.003: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-202-5178
Manual Control Handle

332025178
722421303-01: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-33-155-7848
Double Angle Bracket

331557848
693529: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-200-0003
Manual Control Lever

332000003
35-25151-0005: RNCC: 3 | RNVC: 2

13 Sep 2001

5340-33-207-2950
Snap Hook

332072950
420/12-T-3: RNCC: 3 | RNVC: 2

23 Feb 2009

5340-33-207-3804
Angle Bracket

332073804
212-41051-12.1: RNCC: 3 | RNVC: 2
212-41051-12.1: RNCC: 5 | RNVC: 2

23 Mar 2009

5340-33-160-2979
Angular Soporte

5340-33-201-3985
Double Angle Bracket

332013985
A2811734-401: RNCC: 3 | RNVC: 2

5 Jul 2002

5340-33-208-3327
Access Cover

332083327
C0BT81TA000: RNCC: 3 | RNVC: 2
BT-LV80T-1510.1: RNCC: 5 | RNVC: 2
BAC0BT81TA000SE: RNCC: 5 | RNVC: 2

12 Apr 2010

5340-33-155-7843
Double Angle Bracket

331557843
521804: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-204-9917
Seal Retaining Plate

332049917
95-11513-0003: RNCC: 3 | RNVC: 2

24 Mar 2006

5340-33-211-0197
Dust And Moisture Seal Protective Plug

332110197
0860169002100: RNCC: 3 | RNVC: 2

16 May 2013

5340-33-108-4198
No Metalico Tope

331084198
9644.250.0892: RNCC: 3 | RNVC: 2
1005006134: RNCC: 5 | RNVC: 2
1005006134: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-207-4720
Tee Hinge

332074720
GMD-R-5077: RNCC: 3 | RNVC: 2

22 Apr 2009

5340-33-207-0203
Multiple Angle Bracket

332070203
INS003024010020401: RNCC: 3 | RNVC: 2

14 Oct 2008

5340-33-210-7764
Butt Hinge Leaf

332107764
212-82210-01-1: RNCC: 3 | RNVC: 2

8 Feb 2013

5340-33-105-1469
Dust And Moisture Seal Protective Cap-Plug

331051469
631 766 01 97: RNCC: 3 | RNVC: 2
631 766 01 97: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-005-0609
Double Angle Bracket

330050609
NN60320P01: RNCC: 3 | RNVC: 2

13 Jun 2000

5340-33-210-3394
Sliding Block

332103394
A13520/270: RNCC: 3 | RNVC: 2

29 Aug 2012

5340-33-207-7589
Access Cover

332077589
5044373: RNCC: 3 | RNVC: 2
1.150.11.003: RNCC: 5 | RNVC: 2

5 Oct 2009

5340-33-202-9060
No Met Parachoques

332029060
723551736-01: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-210-0602
Webbing Strap

332100602
234-V2-25+2311TR-30 2500/600: RNCC: 3 | RNVC: 2

18 May 2012

5340-33-207-7134
Rod End Clevis

332077134
5041489: RNCC: 3 | RNVC: 2
1.141.31.028: RNCC: 5 | RNVC: 2

11 Sep 2009

5340-33-210-0402
Mounting Bracket

332100402
330A87-2181-24-MAM-1: RNCC: 3 | RNVC: 9

4 May 2012

5340-33-201-4090
Snap-In Hinged Standoff

332014090
223581333-01: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-202-5162
Double Angle Bracket

332025162
222421751-01: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-33-203-0395
Utility Resilient Mount

332030395
H350GS/D045-A: RNCC: 3 | RNVC: 2
DEL382: RNCC: 5 | RNVC: 2
H350GS/D045-A: RNCC: 5 | RNVC: 2

20 Jan 2004

5340-33-160-3663
Dust And Moisture Seal Protective Cap

331603663
EV-2457: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-102-2955
Hand Crank

331022955
976-C-10: RNCC: 3 | RNVC: 2

11 Jan 1991

5340-33-210-0603
Webbing Strap

332100603
5700-25+2311TR-30 750/300: RNCC: 3 | RNVC: 2

18 May 2012

5340-33-209-0765
Dust And Moisture Seal Protective Cap-Plug

332090765
35-46302-0501: RNCC: 3 | RNVC: 2

31 May 2011

5340-33-210-6122
Cover Strip

332106122
212-22108-15-1: RNCC: 3 | RNVC: 2

29 Nov 2012

5340-33-209-5921
Double Angle Bracket

332095921
0738189200: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-33-207-2166
Mounting Plate

332072166
3315-301: RNCC: 3 | RNVC: 2

19 Jan 2009

5340-33-204-9987
Dust And Moisture Seal Boot

332049987
69691-00A00: RNCC: 3 | RNVC: 2

30 Mar 2006

5340-33-206-0126
Utility Resilient Mount

332060126
K3221037: RNCC: 3 | RNVC: 2
180-1-22-705: RNCC: 5 | RNVC: 2
9999-33-R90-2114: RNCC: 6 | RNVC: 9

21 Jun 2007

5340-33-200-7263
Disk Support

332007263
IN-050B-Q03I.43: RNCC: 3 | RNVC: 2

5 Mar 2002

5340-33-201-4222
Double Angle Bracket

332014222
A2810458-001: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-33-106-4110
Manual Control Handle

331064110
8834 070-301: RNCC: 3 | RNVC: 2

12 Dec 1997

5340-33-200-9339
Seal Retaining Plate

332009339
35-21220-0204: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-33-206-0128
Utility Resilient Mount

332060128
K3221038: RNCC: 3 | RNVC: 2
180-1-23-706: RNCC: 5 | RNVC: 2
9999-33-R90-2115: RNCC: 6 | RNVC: 9

21 Jun 2007

5340-33-160-3207
Muelle Comp Asiento

5340-33-126-0142
Union Placa

5340-33-154-9745

5340-33-208-1146
Access Cover

332081146
3992-101: RNCC: 3 | RNVC: 2

25 Feb 2010

5340-33-108-4394
No Metalico Tope

331084394
0639.250.3132: RNCC: 3 | RNVC: 2
2540000519: RNCC: 5 | RNVC: 2
2540000519: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-188-8910
Acceso: Tapa

5340-33-125-7476
Presilla Abrazadera

5340-33-155-0784

5340-33-155-8742

5340-33-126-2996
Acceso Tapa

5340-33-208-4460
Helical Compression Spring Seat

332084460
2401-8208.78: RNCC: 3 | RNVC: 2

28 Jun 2010

5340-33-207-5813
Mounting Plate

332075813
35-21270-2901: RNCC: 3 | RNVC: 2

2 Jul 2009

5340-33-103-1662
Threaded Hinged Standoff

331031662
5365-000595: RNCC: 3 | RNVC: 2
3303: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-200-1262
Dust And Moisture Seal Protective Cap

332001262
230903: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-004-7091
Double Angle Bracket

330047091
NN60122P01: RNCC: 3 | RNVC: 2

10 Sep 1999

5340-33-004-8403
Double Angle Bracket

330048403
NN51426P01: RNCC: 3 | RNVC: 2

13 Dec 1999

5340-33-207-0118
Catch Strike

332070118
235899: RNCC: 3 | RNVC: 2

10 Oct 2008

5340-33-203-1185
Utility Resilient Mount

332031185
136042: RNCC: 3 | RNVC: 2

2 Feb 2004

5340-33-188-8318
Casement Fastener

331888318
6102033: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-207-1621
Bumper

332071621
10-47215-0001: RNCC: 3 | RNVC: 2
10-47215-0001A01: RNCC: 3 | RNVC: 2

10 Dec 2008

5340-33-103-4570
Resilient Mount Plate

331034570
07015: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-158-9817
Manual Control Handle

331589817
00.151.801.XX: RNCC: 3 | RNVC: 2

12 Jun 1995

5340-33-208-8738
Mounting Bracket

332088738
D0932561153: RNCC: 3 | RNVC: 2

6 Apr 2011

5340-33-200-8640
No Metalico Tope

332008640
35-23305-0001: RNCC: 3 | RNVC: 2

5 Apr 2002

5340-33-108-2424
Manual Control Lever

331082424
9644.120.0035: RNCC: 3 | RNVC: 2
2510006881: RNCC: 5 | RNVC: 2
2510006881: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-160-3847
Spring Tension Clip

331603847
79.03.079.004: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-0091
Dust And Moisture Seal Protective Cover

332110091
27424500: RNCC: 3 | RNVC: 2

10 May 2013

5340-33-202-6411
Snap-In Threaded Standoff

332026411
9673.250.0107: RNCC: 3 | RNVC: 2
2510900493: RNCC: 5 | RNVC: 2
2510900493: RNCC: 5 | RNVC: 2

19 Sep 2003

5340-33-114-3798
Helical Compression Spring Seat

331143798
6916-118: RNCC: 3 | RNVC: 2

3 Oct 1995

5340-33-201-3975
Double Angle Bracket

332013975
A2810478-401: RNCC: 3 | RNVC: 2

5 Jul 2002

5340-33-207-4781
Track Stop

332074781
D57064: RNCC: 3 | RNVC: 2

23 Apr 2009

5340-33-200-9169
Utility Resilient Mount

332009169
4-B S/BAJA, CAUCHO: RNCC: 3 | RNVC: 2
5340700015: RNCC: 5 | RNVC: 2

15 Apr 2002

5340-33-201-4675
Double Angle Bracket

332014675
J92666181-001: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-33-003-6283
Dust And Moisture Seal Boot

330036283
1005-002310: RNCC: 3 | RNVC: 2

25 May 1998

5340-33-206-7904
Mounting Plate

332067904
3301622: RNCC: 3 | RNVC: 2
IV33R272465: RNCC: 5 | RNVC: 2
9999-33-R27-2465: RNCC: 6 | RNVC: 9

23 Jun 2008

5340-33-103-1741
Dust And Moisture Seal Protective Cap

331031741
1005-004235: RNCC: 3 | RNVC: 2
1224: RNCC: 5 | RNVC: 2

15 Jun 1994