What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 38 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 38 of 39

5340-33-106-5681
Antipilferage Seal Locking Wire

331065681
0814817: RNCC: 3 | RNVC: 2
0814817: RNCC: 5 | RNVC: 2

9 Jul 1998

5340-33-209-0353
Mounting Bracket

332090353
0750065300: RNCC: 3 | RNVC: 2

26 May 2011

5340-33-209-5078
Cushioning Pad

332095078
1819.0027.0106A: RNCC: 3 | RNVC: 2

16 Jan 2012

5340-33-209-2088
Protection Bellows

332092088
0661.10.4000.16: RNCC: 3 | RNVC: 2

21 Jul 2011

5340-33-209-6578
Mounting Bracket

332096578
99367363: RNCC: 3 | RNVC: 2

26 Jan 2012

5340-33-155-2107

5340-33-155-0960

5340-33-207-4472
Eye Hook

332074472
OHK-8: RNCC: 3 | RNVC: 2
S0608: RNCC: 5 | RNVC: 2

14 Apr 2009

5340-33-116-1838
Helical Compression Spring Retainer

331161838
842 038: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-105-8994
Helical Compression Spring Seat

331058994
-71300052-0: RNCC: 3 | RNVC: 2
993242C: RNCC: 5 | RNVC: 2

10 Jul 1996

5340-33-211-2182
Double Angle Bracket

332112182
TP252752: RNCC: 3 | RNVC: 2

9 Jul 2013

5340-33-000-4421
Nut And Bolt Locking Plate

330004421
565959: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-210-9297
Hand Crank

332109297
86553A-00: RNCC: 3 | RNVC: 2

3 Apr 2013

5340-33-208-5114
Spring Holder

332085114
XX-421200001504: RNCC: 3 | RNVC: 2
421200001504: RNCC: 5 | RNVC: 2
717331120405: RNCC: 6 | RNVC: 9

3 Aug 2010

5340-33-106-7973
Manual Control Lever

331067973
REM-200-6-2-6: RNCC: 3 | RNVC: 2

31 Mar 1999

5340-33-155-7827
Double Angle Bracket

331557827
321480: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-208-4968
Mounting Plate

332084968
INS003112990060000: RNCC: 3 | RNVC: 2

27 Jul 2010

5340-33-209-1974
Butt Hinge Leaf

332091974
5340900145: RNCC: 3 | RNVC: 2
9743.100.0925: RNCC: 5 | RNVC: 2

18 Jul 2011

5340-33-210-2950
Bumper

332102950
212-20013-02-1: RNCC: 3 | RNVC: 2

24 Jul 2012

5340-33-187-2685
Nonmetallic Solid Wheel

331872685
3/25: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-208-6224
Tee Hinge

332086224
401410202: RNCC: 3 | RNVC: 2

3 Nov 2010

5340-33-002-4779
Mounting Actuator Plate

330024779
212-46300-02-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-205-3294
Electronic Equipment Hardware Kit

332053294
220180110: RNCC: 3 | RNVC: 2

27 Jul 2006

5340-33-208-3554
Staples Round Secti

332083554
1312: RNCC: 3 | RNVC: 2

22 Apr 2010

5340-33-208-1640
Mounting Plate

332081640
5049467: RNCC: 3 | RNVC: 2

11 Mar 2010

5340-33-108-2074
No Metalico Tope

331082074
533707: RNCC: 3 | RNVC: 2
PDOI014801: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-208-9832
Track Stop

332089832
AGB115088Y01: RNCC: 3 | RNVC: 2

20 May 2011

5340-33-158-5535
Helical Compression Spring Seat

331585535
-01700400-1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-2763
Webbing Strap

332072763
PS-912318: RNCC: 3 | RNVC: 2

17 Feb 2009

5340-33-208-1655
Mounting Bracket

332081655
INS003096990130000: RNCC: 3 | RNVC: 2

11 Mar 2010

5340-33-209-4663
Dust And Moisture Seal Protective Cap

332094663
0664.10.1000.01: RNCC: 3 | RNVC: 2

27 Dec 2011

5340-33-207-2911
Butt Hinge Leaf

332072911
PR0011: RNCC: 3 | RNVC: 2

20 Feb 2009

5340-33-181-1114
Helical Compression Spring Seat

331811114
-16772-37500: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-106-4828
Dust And Moisture Seal Protective Plug

331064828
6.437.312.0 - MEISA: RNCC: 3 | RNVC: 2

6 Mar 1998

5340-33-201-9486
Multiple Angle Bracket

332019486
A2811703-401: RNCC: 3 | RNVC: 2

20 Nov 2002

5340-33-209-1498
Angle Bracket

332091498
D0932511174: RNCC: 3 | RNVC: 2

29 Jun 2011

5340-33-207-0129
Bow Handle

332070129
980787: RNCC: 3 | RNVC: 2

10 Oct 2008

5340-33-103-2331
Arandela Embolo

331032331
1055-000287: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-8539
Double Angle Bracket

331578539
783321: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-208-2665
Expansion Shield

332082665
3910: RNCC: 3 | RNVC: 2

5 Apr 2010

5340-33-207-6494
Mounting Bracket

332076494
R0094668: RNCC: 3 | RNVC: 2

21 Jul 2009

5340-33-200-1328
Escutcheon Plate

332001328
4021425030: RNCC: 3 | RNVC: 2

9 Oct 2001

5340-33-155-0205
Hand Crank

331550205
543597: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-33-207-0045
Mending Plate

332070045
TP250322: RNCC: 3 | RNVC: 2

8 Oct 2008

5340-33-206-6524
Mounting Plate

332066524
280.4.150.080.12: RNCC: 3 | RNVC: 2

11 Apr 2008

5340-33-154-9717
Window Regulator Handle

331549717
72-2-305: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-210-5305
Mechanical Stop

332105305
217520: RNCC: 3 | RNVC: 2

26 Oct 2012

5340-33-206-9582
Runner

332069582
150.547-300.30.53: RNCC: 3 | RNVC: 2

26 Sep 2008

5340-33-160-6799
Dust And Moisture Seal Boot

331606799
91.510.635: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-160-7466
Helical Compression Spring Seat

331607466
79.10.009.137: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-209-4802
Mounting Bracket

332094802
QPCO-101-001-01: RNCC: 3 | RNVC: 2

29 Dec 2011

5340-33-154-1758
Window Regulator Handle

331541758
571522: RNCC: 3 | RNVC: 2

5 Jan 1990

5340-33-207-0135
Mounting Bracket

332070135
T535S1401203: RNCC: 3 | RNVC: 2

10 Oct 2008

5340-33-116-3548
Double Angle Bracket

331163548
6370.433: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-210-7592
Escutcheon Plate

332107592
212-84200-15-1: RNCC: 3 | RNVC: 2

3 Feb 2013

5340-33-203-9338
Double Angle Bracket

332039338
PS-401053: RNCC: 3 | RNVC: 2

24 Jan 2005

5340-33-001-4057
Headless Straight Rod

330014057
92021356: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-004-8159
Dust And Moisture Seal Protective Cap

330048159
27.01.040.01.00.00: RNCC: 3 | RNVC: 2

5 Nov 1999

5340-33-204-3762
Double Angle Bracket

332043762
NN60832P01: RNCC: 3 | RNVC: 2

18 Aug 2005

5340-33-209-5551
Mounting Bracket

332095551
0738010600: RNCC: 3 | RNVC: 2

17 Jan 2012

5340-33-201-3656
Mechanic Equipment Hardware Kit

332013656
54.21/3: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-33-004-2166
Dust And Moisture Seal Protective Plug

330042166
SS-18-0063G: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-207-2670
Access Cover

332072670
730011402: RNCC: 3 | RNVC: 2

11 Feb 2009

5340-33-204-8031
Manual Control Handle

332048031
PS-911738: RNCC: 3 | RNVC: 2
9039.16000: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-33-161-3460
Nut And Bolt Locking Plate

331613460
545623: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-108-7434
Resilient Mount Plate

331087434
419754007: RNCC: 3 | RNVC: 2

23 Jul 2001

5340-33-002-8282
Broche

330028282
NR11063976: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-207-2764
Webbing Strap

332072764
PS-912319: RNCC: 3 | RNVC: 2

17 Feb 2009

5340-33-204-8967
No Metalico Tope

332048967
09320-14022: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-209-9807
Mechanical Stop

332099807
0738044980: RNCC: 3 | RNVC: 2

18 Apr 2012

5340-33-160-3858
Spring Tension Clip

331603858
79.03.078.024: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-3436
Metallic Solid Wheel

332013436
01.2201066: RNCC: 3 | RNVC: 2

28 Jun 2002

5340-33-161-3485
Dust And Moisture Seal Protective Cap

331613485
575726: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-33-209-0478
Mechanical Stop

332090478
AGC038160D23: RNCC: 3 | RNVC: 2

26 May 2011

5340-33-202-1308
Hand Crank

332021308
5030830: RNCC: 3 | RNVC: 2

28 Jan 2003

5340-33-206-3989
Threaded Hinged Standoff

332063989
XX-000000052500: RNCC: 3 | RNVC: 2
000000052500: RNCC: 5 | RNVC: 2

18 Dec 2007

5340-33-208-6094
Retaining Strap

332086094
J92561501-001: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-33-115-9571
Helical Compression Spring Seat

331159571
6.0690.28.1.0103: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-102-1818
Manual Control Handle

331021818
42330000090: RNCC: 3 | RNVC: 2
MC51-3-9: RNCC: 3 | RNVC: 2
42330000090: RNCC: 3 | RNVC: 2
MC51-3-9: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-201-1020
Dust And Moisture Seal Protective Plug

332011020
A46615-1: RNCC: 3 | RNVC: 2

30 Apr 2002

5340-33-004-5626
Window Regulator Handle

330045626
201192: RNCC: 3 | RNVC: 2

25 Jun 1999

5340-33-208-6794
Corner Brace

332086794
363000114-001: RNCC: 3 | RNVC: 2

2 Dec 2010

5340-33-208-8267
Casement Fastener

332088267
0405: RNCC: 3 | RNVC: 2

11 Mar 2011

5340-33-206-5305
Mounting Plate

332065305
CF 327 064 CU: RNCC: 3 | RNVC: 2

20 Feb 2008

5340-33-207-4091
Angle Bracket

332074091
212-41051-12.2: RNCC: 3 | RNVC: 2
212-41051-12.2: RNCC: 5 | RNVC: 2

31 Mar 2009

5340-33-107-2898
No Metalico Tope

331072898
0114493: RNCC: 3 | RNVC: 2

24 Sep 1999

5340-33-003-3571
Helical Compression Spring Seat

330033571
11.11272-0004: RNCC: 3 | RNVC: 2

26 Jun 1997

5340-33-002-8675
Resbalon

330028675
201358000: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-207-4476
Strap Hinge Leaf

332074476
9072.M8000: RNCC: 3 | RNVC: 2

14 Apr 2009

5340-33-206-6733
Plug Button

332066733
H 27061: RNCC: 3 | RNVC: 2
2990-33-R11-8428: RNCC: 6 | RNVC: 9

17 Apr 2008

5340-33-208-4017
Access Cover

332084017
CSA-07020018-190-A00: RNCC: 3 | RNVC: 2

13 May 2010

5340-33-207-6559
Mounting Bracket

332076559
R0096719: RNCC: 3 | RNVC: 2

23 Jul 2009

5340-33-201-1622
Angular: Soporte

5340-33-209-4041
Mechanical Stop

332094041
0738000160: RNCC: 3 | RNVC: 2

1 Dec 2011

5340-33-207-9949
Mounting Bracket

332079949
40.28.60.3006.0: RNCC: 3 | RNVC: 2

22 Dec 2009

5340-33-187-2689
Nonmetallic Solid Wheel

331872689
169/130/FG: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-106-4720
Metalico Tope

331064720
98480268: RNCC: 3 | RNVC: 2

6 Mar 1998

5340-33-207-9948
Mounting Bracket

332079948
40.18.60.0001.0: RNCC: 3 | RNVC: 2

22 Dec 2009

5340-33-207-5803
Metal Grille

332075803
DF 204 472 A: RNCC: 3 | RNVC: 2

30 Jun 2009

5340-33-208-3629
Mortise Latch

332083629
CA38600-3: RNCC: 3 | RNVC: 2

23 Apr 2010

5340-33-209-4076
Rod End Clevis

332094076
35-94070-1203: RNCC: 3 | RNVC: 2

2 Dec 2011

5340-33-204-8965
No Metalico Tope

332048965
09320-12048: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-182-0008
No Metalico Tope

331820008
-74600093-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-106-1766
No Metalico Tope

331061766
631 317 02 12: RNCC: 3 | RNVC: 2

18 Jun 1997

5340-33-206-6908
Double Angle Bracket

332066908
62029203: RNCC: 3 | RNVC: 2

5 May 2008

5340-33-206-5256
Multiple Angle Bracket

332065256
015284034: RNCC: 3 | RNVC: 2
015284034: RNCC: 5 | RNVC: 2

18 Feb 2008

5340-33-209-9823
Manual Control Handle

332099823
231161200: RNCC: 3 | RNVC: 2

18 Apr 2012

5340-33-201-1631
Retencion: Brida

5340-33-004-5249
Dust And Moisture Seal Protective Plug

330045249
5-506-214: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-002-9300
No Metalico Tope

330029300
6313170812: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-190-5569
Sealing Plug Assembly

331905569
K43164071-003: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-160-2824
Sujecion Brida

5340-33-160-2799
Muelle Helico Reten

5340-33-207-4396
Double Angle Bracket

332074396
980687: RNCC: 3 | RNVC: 2

13 Apr 2009

5340-33-207-0142
Double Angle Bracket

332070142
INS003024010010601: RNCC: 3 | RNVC: 2

10 Oct 2008

5340-33-200-7924
Electromagnetic Lock

332007924
830100: RNCC: 3 | RNVC: 2

12 Mar 2002

5340-33-106-4942
Dust And Moisture Seal Boot

331064942
-48956-C6000: RNCC: 3 | RNVC: 2

9 Mar 1998

5340-33-209-5648
Mounting Bracket

332095648
0738050250: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-33-208-0713
Mounting Bracket

332080713
610CM110005: RNCC: 3 | RNVC: 2

9 Feb 2010

5340-33-207-0513
Lock-Release Lever

332070513
980885: RNCC: 3 | RNVC: 2

24 Oct 2008

5340-33-108-1839
Multiple Angle Bracket

331081839
7054.292.0020: RNCC: 3 | RNVC: 2
2510700969: RNCC: 5 | RNVC: 2

29 Jan 2001

5340-33-204-4283
Headless Straight Rod

332044283
W280698402012: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-157-7634
Double Angle Bracket

331577634
561875: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-005-3804
Double Angle Bracket

330053804
SDCD: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-33-200-7480
Mechanic Equipment Hardware Kit

332007480
7356.252.2860: RNCC: 3 | RNVC: 2
BMR2136: RNCC: 5 | RNVC: 2

6 Mar 2002

5340-33-107-1848
Helical Compression Spring Seat

331071848
615423: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-155-0782

5340-33-209-5922
Double Angle Bracket

332095922
0738189300: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-33-160-3842
Spring Tension Clip

331603842
79.03.079.118: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-4557
Electronic Equipment Hardware Kit

331074557
W290678900200: RNCC: 3 | RNVC: 2

4 Nov 1999

5340-33-000-7813
Dust And Moisture Seal Protective Plug

330007813
426200010600000: RNCC: 3 | RNVC: 2

2 Dec 1988

5340-33-207-6251
Bumper

332076251
DF 400 517 AX: RNCC: 3 | RNVC: 2

14 Jul 2009

5340-33-205-8646
Spring Tension Clip

332058646
M.A.S. 841-25.15-17: RNCC: 3 | RNVC: 2

24 Apr 2007

5340-33-209-4725
Bumper

332094725
0664.20.6000.18: RNCC: 3 | RNVC: 2

29 Dec 2011

5340-33-206-7381
Webbing Strap

332067381
PS-912099: RNCC: 3 | RNVC: 2

23 May 2008

5340-33-003-2916
Mechanic Equipment Hardware Kit

330032916
221024180: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-190-2544
Spring Tension Clip

331902544
44345: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-210-2338
Helical Compression Spring Seat

332102338
249770199: RNCC: 3 | RNVC: 2
249770199: RNCC: 5 | RNVC: 2

5 Jul 2012

5340-33-160-3863
Spring Tension Clip

331603863
95.602.187: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-2180
Multiple Angle Bracket

332052180
CBD50542P32: RNCC: 3 | RNVC: 2

23 Jun 2006

5340-33-005-2562
Window Retaining Plate

330052562
35-21230-0103: RNCC: 3 | RNVC: 2

13 Mar 2001

5340-33-210-6637
Mounting Plate

332106637
060532A-00: RNCC: 3 | RNVC: 2

19 Dec 2012

5340-33-161-3660
No Metalico Tope

331613660
615626: RNCC: 3 | RNVC: 2
630299: RNCC: 5 | RNVC: 9
630300: RNCC: 5 | RNVC: 9

25 Jul 1995

5340-33-209-6353
Mounting Plate

332096353
0738060620: RNCC: 3 | RNVC: 2

24 Jan 2012

5340-33-201-9712
No Metalico Tope

332019712
525646386: RNCC: 3 | RNVC: 2
525646386: RNCC: 5 | RNVC: 2

29 Nov 2002

5340-33-210-2956
Bumper

332102956
212-20029-02-1: RNCC: 3 | RNVC: 2

24 Jul 2012

5340-33-209-8526
Dust And Moisture Seal Protective Cover

332098526
0227541: RNCC: 3 | RNVC: 2

20 Mar 2012

5340-33-205-4223
Utility Access Door

332054223
5040316: RNCC: 3 | RNVC: 2
1.143.92.015: RNCC: 5 | RNVC: 2

19 Sep 2006

5340-33-200-0940
Manual Control Lever

332000940
7054.252.2190: RNCC: 3 | RNVC: 2
2510701292: RNCC: 5 | RNVC: 2

5 Oct 2001

5340-33-002-8695
Window Regulator Handle

330028695
203751000: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-106-0733
Dust And Moisture Seal Boot

331060733
11.690: RNCC: 3 | RNVC: 2

13 Feb 1997

5340-33-207-4342
Protection Bellows

332074342
95-94150-0107: RNCC: 3 | RNVC: 2

8 Apr 2009

5340-33-209-5637
Mending Plate

332095637
0738044620: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-33-209-5636
Mending Plate

332095636
0738052650: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-33-105-9294
Window Regulator Handle

331059294
230311: RNCC: 3 | RNVC: 2

27 Aug 1996

5340-33-108-6956
Utility Resilient Mount

331086956
17285404: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-33-002-9768
Dust And Moisture Seal Protective Cap-Plug

330029768
6319971986: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-209-4897
Mounting Bracket

332094897
0890.01.2000.00: RNCC: 3 | RNVC: 2

2 Jan 2012

5340-33-126-5108
Access Cover

331265108
C22165-A1000-C1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-209-6138
Caster Wheel

332096138
082X070 NYA: RNCC: 3 | RNVC: 2
60-010: RNCC: 5 | RNVC: 2

20 Jan 2012

5340-33-208-3957
Dust And Moisture Seal Protective Cap

332083957
32301605: RNCC: 3 | RNVC: 2

7 May 2010

5340-33-108-6036
Dust And Moisture Seal Protective Plug

331086036
6419970686: RNCC: 3 | RNVC: 2

30 Apr 2001

5340-33-200-4311
Multiple Angle Bracket

332004311
7063.252.0095: RNCC: 3 | RNVC: 2
2540700096: RNCC: 5 | RNVC: 2

25 Jan 2002

5340-33-154-3824
Helical Compression Spring Seat

331543824
620813: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-206-6411
Mounting Bracket

332066411
CF EAB 713: RNCC: 3 | RNVC: 2

7 Apr 2008

5340-33-208-8637
Mounting Bracket

332088637
MAAC-500030285: RNCC: 3 | RNVC: 2

30 Mar 2011

5340-33-102-2512
Dust And Moisture Seal Protective Cap

331022512
1005-001775: RNCC: 3 | RNVC: 2

15 Jan 1991

5340-33-181-0165
Double Angle Bracket

331810165
-32955-C8000: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-208-9046
Mounting Plate

332089046
B044 2714: RNCC: 3 | RNVC: 2

25 Apr 2011

5340-33-107-8702
Sealing Plug Assembly

331078702
PCAMI/RP/37C0000104: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-33-153-8929
Manual Control Handle

331538929
512381: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-108-2594
Manual Control Lever

331082594
9644.251.0940: RNCC: 3 | RNVC: 2
2510010018: RNCC: 5 | RNVC: 2
2510010018: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-208-7659
Runner Roller Assy

332087659
R0099504: RNCC: 3 | RNVC: 2

15 Feb 2011

5340-33-181-5847
Dust And Moisture Seal Protective Cap

331815847
-01201572-1: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-188-7349
Mounting Bracket

331887349
6.308.0.787.003.4: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-33-200-7567
Retaining Clip

332007567
IN-050B-Q03I.16: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-33-003-0767
Dust And Moisture Seal Protective Cap-Plug

330030767
01658-00971: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-210-4047
Mounting Bracket

332104047
185249: RNCC: 3 | RNVC: 2

28 Sep 2012

5340-33-209-1308
Webbing Strap

332091308
0751050101: RNCC: 3 | RNVC: 2

20 Jun 2011

5340-33-160-6232
Manual Control Handle

331606232
95.594.997: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-5961
Bumper

332075961
AGTACAM75SNN: RNCC: 3 | RNVC: 2

6 Jul 2009

5340-33-204-7966
Proteccion Aforador

332047966
5037339: RNCC: 3 | RNVC: 2
1.124.91.002: RNCC: 5 | RNVC: 2

25 Jan 2006

5340-33-209-5451
Mounting Plate

332095451
9743.100.0921: RNCC: 3 | RNVC: 2
5895900040: RNCC: 5 | RNVC: 2

17 Jan 2012

5340-33-206-7944
Pad Eye

332067944
CBD58505P12: RNCC: 3 | RNVC: 2

24 Jun 2008

5340-33-210-1195
Manual Control Lever

332101195
35-21270-0507-00: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-33-155-7847
Double Angle Bracket

331557847
642127: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-187-5046
Headless Straight Rod

331875046
169183: RNCC: 3 | RNVC: 2
NRC0131: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-4172
No Metalico Tope

332004172
W 3695 130 2: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-106-7500
Dust And Moisture Seal Protective Cap-Plug

331067500
5340.000197: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-206-8280
Mounting Bracket

332068280
SKY2160001: RNCC: 3 | RNVC: 9

14 Jul 2008

5340-33-206-7696
Buckle

332067696
PS-912697: RNCC: 3 | RNVC: 2

12 Jun 2008

5340-33-205-4132
Locking Stay

332054132
5040092: RNCC: 3 | RNVC: 2
1.143.31.060: RNCC: 5 | RNVC: 2

15 Sep 2006

5340-33-207-7506
Mounting Plate

332077506
5047649: RNCC: 3 | RNVC: 2
1.150.11.011: RNCC: 5 | RNVC: 2

30 Sep 2009

5340-33-210-0598
Webbing Strap

332100598
235-WH3-50+232-50 1800/1000: RNCC: 3 | RNVC: 2

18 May 2012

5340-33-004-5259
Dust And Moisture Seal Protective Plug

330045259
4033234240: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-208-8097
Mounting Bracket

332088097
4306-101: RNCC: 3 | RNVC: 2

4 Mar 2011

5340-33-210-5890
Butt Hinge

332105890
35-82881-0003-51: RNCC: 3 | RNVC: 2

26 Nov 2012

5340-33-106-8114
Double Angle Bracket

331068114
RE-25-4-3-4: RNCC: 3 | RNVC: 2

31 Mar 1999

5340-33-158-5582
Dust And Moisture Seal Protective Cap

331585582
-60088184-R1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-5574
Mounting Bracket

332075574
326061: RNCC: 3 | RNVC: 2

24 Jun 2009

5340-33-108-5396
Manual Control Lever

331085396
9644.251.9410: RNCC: 3 | RNVC: 2
2510901002: RNCC: 5 | RNVC: 2
2510901002: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-003-2485
Mechanic Equipment Hardware Kit

330032485
221022200: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-33-107-2288
Hand Crank

331072288
32530001020: RNCC: 3 | RNVC: 2

25 Jun 1999

5340-33-108-1705
Manual Control Handle

331081705
TONDIAA61: RNCC: 3 | RNVC: 2

29 Jan 2001

5340-33-108-1958
Dust And Moisture Seal Protective Cover

331081958
583772: RNCC: 3 | RNVC: 2

29 Jan 2001

5340-33-207-5105
Mounting Bracket

332075105
227351001-02: RNCC: 3 | RNVC: 2

27 May 2009

5340-33-208-4910
Butt Hinge Leaf

332084910
95-82226-0103: RNCC: 3 | RNVC: 2

23 Jul 2010

5340-33-208-1607
Mounting Bracket

332081607
INS003096990190000: RNCC: 3 | RNVC: 2

10 Mar 2010

5340-33-202-9879
Bow Handle

332029879
223551107-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-204-6089
Spring Tension Clip

332046089
51781-85C00: RNCC: 3 | RNVC: 2

3 Nov 2005

5340-33-209-0294
Protection Bellows

332090294
0750011480: RNCC: 3 | RNVC: 2

26 May 2011

5340-33-003-2871
Mechanic Equipment Hardware Kit

330032871
221023300: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-103-1425
Double Angle Bracket

331031425
1005-004267: RNCC: 3 | RNVC: 2
1502: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-003-3247
Mechanic Equipment Hardware Kit

330033247
221024825: RNCC: 3 | RNVC: 2

28 May 1997

5340-33-154-0287
Helical Compression Spring Seat

331540287
746507: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-200-5536
Dust And Moisture Seal Protective Cap-Plug

332005536
730120011: RNCC: 3 | RNVC: 2

4 Feb 2002

5340-33-202-5575
Seal Retaining Plate

332025575
95-11513-0001: RNCC: 3 | RNVC: 2

19 Aug 2003

5340-33-208-4524
Catch Strike

332084524
0634 10: RNCC: 3 | RNVC: 2
5340900065: RNCC: 5 | RNVC: 2

1 Jul 2010

5340-33-210-7488
Dust And Moisture Seal Protective Cap

332107488
212-83226-1: RNCC: 3 | RNVC: 2

3 Feb 2013

5340-33-211-3847
Threaded Hinged Standoff

332113847
XX-113103200120: RNCC: 3 | RNVC: 2
113103200120: RNCC: 5 | RNVC: 1

11 Oct 2013

5340-33-208-7546
Mounting Bracket

332087546
R0110889: RNCC: 3 | RNVC: 2

3 Feb 2011

5340-33-181-7510
Helical Compression Spring Seat

331817510
-06902423-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-202-4487
Dust And Moisture Seal Protective Cap

332024487
275-2-D: RNCC: 3 | RNVC: 2

10 Jun 2003

5340-33-180-5540
Strap Hinge Leaf

331805540
138296: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-103-1622
Anillo Centrador

331031622
471-091-0001: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-4162
Mounting Actuator Plate

331084162
0640.100.0960: RNCC: 3 | RNVC: 2
1005005062: RNCC: 5 | RNVC: 2
1005005062: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-181-1176
Spring Tension Clip

331811176
-24210-01W05: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-208-9497
Mounting Bracket

332089497
4064-401: RNCC: 3 | RNVC: 2

18 May 2011

5340-33-000-6445
Helical Compression Spring Seat

330006445
126427 95: RNCC: 1 | RNVC: 2

15 Jun 1988

5340-33-209-7545
Mounting Bracket

332097545
0661.10.3000.05: RNCC: 3 | RNVC: 2

22 Feb 2012

5340-33-003-5467
Nut And Bolt Retainer

330035467
721024156: RNCC: 3 | RNVC: 2

3 Dec 1997

5340-33-160-0035
Window Regulator Handle

331600035
00.561.830.XX: RNCC: 3 | RNVC: 2

12 Jun 1995

5340-33-114-4897
Helical Compression Spring Retainer

331144897
5TG 2-30: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-210-6771
Mounting Bracket

332106771
231146000: RNCC: 3 | RNVC: 2

20 Dec 2012

5340-33-210-2916
Rod End Clevis

332102916
M361A1412200: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-33-103-1873
Manual Control Handle

331031873
1055-000079: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-114-3765
Helical Compression Spring Retainer

331143765
6916-84: RNCC: 3 | RNVC: 2

3 Oct 1995

5340-33-209-1564
Loop Clamp

332091564
20125: RNCC: 3 | RNVC: 2
MIL-S-23190E: RNCC: 4 | RNVC: 1

5 Jul 2011

5340-33-103-2512
Double Angle Bracket

331032512
2590-000124: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-210-1081
Elastic Strap

332101081
CAN51019-6-260: RNCC: 3 | RNVC: 2

29 May 2012

5340-33-115-6085
Dust And Moisture Seal Protective Cap

331156085
92275700315: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-33-116-6515
Manual Control Handle

331166515
601.002.000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-6802
Bumper

332076802
95-94150-0103: RNCC: 3 | RNVC: 2

4 Aug 2009

5340-33-209-0620
Shipping And Storage Container Twistlock

332090620
AGC028136FDR: RNCC: 3 | RNVC: 2

27 May 2011

5340-33-209-1832
Mounting Bracket

332091832
0742001110: RNCC: 3 | RNVC: 2

13 Jul 2011

5340-33-209-9346
Rod End Connector

332099346
1025900315: RNCC: 3 | RNVC: 2
9682.101.1141: RNCC: 5 | RNVC: 2

3 Apr 2012

5340-33-209-0351
Access Cover

332090351
0750065902: RNCC: 3 | RNVC: 2

26 May 2011

5340-33-207-5812
Dust And Moisture Seal Protective Plug

332075812
35-21184-0204: RNCC: 3 | RNVC: 2

2 Jul 2009

5340-33-207-3317
Dust And Moisture Seal Protective Plug

332073317
35-13005-0303: RNCC: 3 | RNVC: 2

5 Mar 2009

5340-33-181-7230
Dust And Moisture Seal Protective Plug

331817230
-0650588: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-207-6572
Mounting Bracket

332076572
R0096268: RNCC: 3 | RNVC: 2

23 Jul 2009

5340-33-209-1677
Spring Tension Clip

332091677
0750 18: RNCC: 3 | RNVC: 2
5340900658: RNCC: 5 | RNVC: 2

6 Jul 2011

5340-33-180-8133
Double Angle Bracket

331808133
577874: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-103-1192
Manual Control Lever

331031192
375.090.0170: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-3463
Spring Tension Clip

332043463
09403-08313: RNCC: 3 | RNVC: 2
09403-08313: RNCC: 5 | RNVC: 2

19 Jul 2005

5340-33-204-4832
Dust And Moisture Seal Protective Plug

332044832
PS-911498: RNCC: 3 | RNVC: 2

21 Sep 2005

5340-33-205-4137
Double Angle Bracket

332054137
5040348: RNCC: 3 | RNVC: 2
1.143.60.924: RNCC: 5 | RNVC: 2

15 Sep 2006

5340-33-209-8824
Metal Grille

332098824
230.010: RNCC: 3 | RNVC: 2

28 Mar 2012

5340-33-207-3813
Mounting Bracket

332073813
MA620111-0: RNCC: 3 | RNVC: 2

23 Mar 2009

5340-33-201-4668
Double Angle Bracket

332014668
J57167840-004: RNCC: 3 | RNVC: 2

30 Jul 2002

5340-33-158-1846
Window Regulator Handle

331581846
508039: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-003-2870
Mechanic Equipment Hardware Kit

330032870
220150556: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-160-6798
Dust And Moisture Seal Boot

331606798
95.532.950: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-107-8465
Dust And Moisture Seal Protective Plug

331078465
-06902676-0: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-33-200-5682
Manual Control Lever

332005682
SPA800010: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-33-205-0478
Bow Handle

332050478
9280075: RNCC: 3 | RNVC: 2

18 Apr 2006

5340-33-209-1680
Mounting Bracket

332091680
0751028101: RNCC: 3 | RNVC: 2

6 Jul 2011

5340-33-116-8161
Dust And Moisture Seal Protective Cap-Plug

331168161
602.014: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-105-8790
Key Holder

331058790
1070: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-33-204-3057
Electronic Equipment Hardware Kit

332043057
220124505: RNCC: 3 | RNVC: 2

28 Jun 2005

5340-33-154-0293
Helical Compression Spring Seat

331540293
812308: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-107-6520
Double Angle Bracket

331076520
10126000290: RNCC: 3 | RNVC: 2

17 Mar 2000

5340-33-157-7718
Double Angle Bracket

331577718
577393: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-7096
Mounting Bracket

332077096
D530-01-060: RNCC: 3 | RNVC: 2

9 Sep 2009

5340-33-207-4953
Multiple Angle Bracket

332074953
10-33011-0001: RNCC: 3 | RNVC: 2

7 May 2009

5340-33-106-1038
Manual Control Lever

331061038
CMH95200-3/6-31: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-107-1234
Flush Lock

331071234
610103202: RNCC: 3 | RNVC: 2
PCAMI/RP/0361010322: RNCC: 6 | RNVC: 9

29 Jun 1999

5340-33-181-1143
Dust And Moisture Seal Protective Plug

331811143
-32857-E3200: RNCC: 3 | RNVC: 2
-32857-E3211: RNCC: 5 | RNVC: 2

20 Jul 1995

5340-33-209-1034
Mounting Bracket

332091034
D0931560084: RNCC: 3 | RNVC: 2

10 Jun 2011

5340-33-211-5026
Double Angle Bracket

332115026
J92562120-701: RNCC: 3 | RNVC: 2

22 Nov 2013

5340-33-210-2945
Butt Hinge Leaf

332102945
212-13502-03-1: RNCC: 3 | RNVC: 2

24 Jul 2012

5340-33-208-1221
Mounting Bracket

332081221
10-46317-0001: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-33-210-3410
Sliding Block

332103410
PIE-32 24.15.103: RNCC: 3 | RNVC: 2

4 Sep 2012

5340-33-210-6001
Webbing Strap

332106001
0109128: RNCC: 3 | RNVC: 2

26 Nov 2012

5340-33-211-2866
Double Angle Bracket

332112866
TP252616: RNCC: 3 | RNVC: 2

9 Aug 2013

5340-33-155-6464
Helical Compression Spring Seat

331556464
181070.61: RNCC: 3 | RNVC: 2
181070.61: RNCC: 3 | RNVC: 2
0079045920: RNCC: 5 | RNVC: 2

18 Oct 1990

5340-33-209-0061
Access Cover

332090061
191440874: RNCC: 3 | RNVC: 2
191440874: RNCC: 5 | RNVC: 2

24 May 2011

5340-33-103-0159
Dust And Moisture Seal Protective Cap

331030159
919-3-8: RNCC: 3 | RNVC: 2

13 Nov 1992

5340-33-208-0954
Double Angle Bracket

332080954
SP08256-1: RNCC: 3 | RNVC: 2

17 Feb 2010

5340-33-004-7228
Gancho Aproximacion

330047228
85.10.05.CT.70: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-209-1461
Mounting Plate

332091461
0750038281: RNCC: 3 | RNVC: 2

28 Jun 2011

5340-33-155-7858
Double Angle Bracket

331557858
753206: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-208-4130
Rod End Clevis

332084130
L13008: RNCC: 3 | RNVC: 2

25 May 2010

5340-33-207-1282
Manual Control Lever

332071282
630191060: RNCC: 3 | RNVC: 2
A901915-009: RNCC: 5 | RNVC: 2

26 Nov 2008

5340-33-205-5559
T Asiento Soporte

332055559
10-71760-0401: RNCC: 3 | RNVC: 2

15 Dec 2006

5340-33-201-9468
Nut And Bolt Retainer

332019468
J57165110-001: RNCC: 3 | RNVC: 2

20 Nov 2002

5340-33-108-2931
Montajes Soporte

5340-33-108-2930
Plan Macizo Disco

5340-33-158-9567
Access Cover

331589567
2107.86: RNCC: 3 | RNVC: 2

18 Sep 1992

5340-33-155-7865
Double Angle Bracket

331557865
641341: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-203-1789
Manual Control Lever

332031789
9673.250.6560: RNCC: 3 | RNVC: 2
2540900832: RNCC: 5 | RNVC: 2
2540900832: RNCC: 5 | RNVC: 2

11 Feb 2004

5340-33-153-8945
Manual Control Handle

331538945
840318: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-206-7950
Mechanical Stop

332067950
CBD58505P39: RNCC: 3 | RNVC: 2

25 Jun 2008

5340-33-000-4402
Nut And Bolt Locking Plate

330004402
517472: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-201-9484
Multiple Angle Bracket

332019484
A2811702-401: RNCC: 3 | RNVC: 2

20 Nov 2002

5340-33-160-3866
Spring Tension Clip

331603866
79.03.079.122: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-8005
Double Angle Bracket

331578005
690041: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-1485
P Placa De Montaje

331031485
1005-004574: RNCC: 3 | RNVC: 2
3405: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-208-8259
Hand Crank

332088259
ZVN500016-501: RNCC: 3 | RNVC: 2

11 Mar 2011

5340-33-181-1182
Escutcheon Plate

331811182
-90672-C6100: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-206-6453
Mounting Bracket

332066453
291046-7: RNCC: 3 | RNVC: 2

9 Apr 2008

5340-33-002-9611
Dust And Moisture Seal Protective Cap

330029611
6317500302: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-209-2063
Swivel Caster

332092063
0661.10.1002.00: RNCC: 3 | RNVC: 2
0661.10.1002.00.M01: RNCC: 5 | RNVC: 2

20 Jul 2011

5340-33-210-4048
Mounting Bracket

332104048
185250: RNCC: 3 | RNVC: 2

28 Sep 2012

5340-33-209-0257
Mounting Plate

332090257
AGC017405C0L: RNCC: 3 | RNVC: 2

26 May 2011

5340-33-209-1312
Bumper

332091312
0751034111: RNCC: 3 | RNVC: 2

21 Jun 2011

5340-33-207-6497
Mounting Bracket

332076497
R0094674: RNCC: 3 | RNVC: 2

21 Jul 2009

5340-33-206-4111
Electronic Equipment Hardware Kit

332064111
RFE-5800H-SK006: RNCC: 3 | RNVC: 2

27 Dec 2007

5340-33-208-3393
Helical Compression Spring Seat

332083393
C0620171700: RNCC: 3 | RNVC: 2
BAC0620171700SE: RNCC: 5 | RNVC: 2
BT-LV80T-5252: RNCC: 5 | RNVC: 2

15 Apr 2010

5340-33-107-1218
Dust And Moisture Seal Protective Cover

331071218
610100102: RNCC: 3 | RNVC: 2
PCAMI/RP/0361010012: RNCC: 6 | RNVC: 9

29 Jun 1999

5340-33-204-7077
Retaining Clip

332047077
2003255: RNCC: 3 | RNVC: 2

13 Dec 2005

5340-33-103-0875
Double Angle Bracket

331030875
2510-002103: RNCC: 3 | RNVC: 2
411.090.0831: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-002-2588
Dust And Moisture Seal Protective Plug

330022588
710-020-64000: RNCC: 3 | RNVC: 2

24 Mar 1994

5340-33-200-8919
Electronic Equipment Hardware Kit

332008919
W290698608000: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-33-158-1877
Tapon

331581877
616946: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-210-0935
Dust And Moisture Seal Protective Cap-Plug

332100935
GCRM80032A: RNCC: 3 | RNVC: 2

22 May 2012

5340-33-210-6148
Mounting Bracket

332106148
0853722500000: RNCC: 3 | RNVC: 2

30 Nov 2012

5340-33-106-4187
Dust And Moisture Seal Boot

331064187
0060215600: RNCC: 3 | RNVC: 2

19 Dec 1997

5340-33-200-0513
Multiple Angle Bracket

332000513
7063.252.0116: RNCC: 3 | RNVC: 2
2510701233: RNCC: 5 | RNVC: 2

1 Oct 2001

5340-33-190-5561
Sealing Plug Assembly

331905561
K43175080-003: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-4223
Double Angle Bracket

332014223
A2810495-001: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-33-003-4014
Spring Holder

330034014
11.20372-0172: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-106-4392
Dust And Moisture Seal Protective Plug

331064392
334092011: RNCC: 3 | RNVC: 2

29 Jan 1998

5340-33-201-0431
Utility Resilient Mount

332010431
5340001107: RNCC: 3 | RNVC: 2
5340001107: RNCC: 5 | RNVC: 2

24 Apr 2002

5340-33-202-0157
Manual Control Lever

332020157
2510002861: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-33-160-7498
Helical Compression Spring Seat

331607498
91.519.748: RNCC: 3 | RNVC: 2

21 Sep 1995

5340-33-209-2135
Mounting Bracket

332092135
0750045202: RNCC: 3 | RNVC: 2

21 Jul 2011

5340-33-209-5619
Mounting Plate

332095619
2510005342: RNCC: 3 | RNVC: 2
0640.810.0026: RNCC: 5 | RNVC: 2

17 Jan 2012

5340-33-116-8407
Semiacoplamiento

331168407
598/5124/2: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-107-6455
Double Angle Bracket

331076455
7356.252.0841: RNCC: 3 | RNVC: 2
2590001237: RNCC: 5 | RNVC: 2

17 Apr 2000

5340-33-004-7078
Double Angle Bracket

330047078
NN60293: RNCC: 1 | RNVC: 2
NN60293P01: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-33-202-4880
Fusible Mecanico

332024880
2.135.106-A: RNCC: 3 | RNVC: 2
5029131: RNCC: 5 | RNVC: 2

11 Jul 2003

5340-33-161-4670
Multiple Angle Bracket

331614670
2530-000257: RNCC: 3 | RNVC: 2

27 Apr 1995

5340-33-206-5396
Case Corner

332065396
K-003/N: RNCC: 3 | RNVC: 2

25 Feb 2008

5340-33-156-2365
Double Angle Bracket

331562365
-11340-Y9501: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-107-8464
Dust And Moisture Seal Protective Plug

331078464
-06902675-0: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-33-207-0096
Mounting Bracket

332070096
607ME100002: RNCC: 3 | RNVC: 2

9 Oct 2008

5340-33-209-6341
Butt Hinge

332096341
0738054550: RNCC: 3 | RNVC: 2

24 Jan 2012

5340-33-004-8735
Retaining Clip

330048735
NJD53409P05: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-33-004-8754
Multiple Angle Bracket

330048754
NN60313P01: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-33-105-2917
Manual Control Handle

331052917
120420: RNCC: 3 | RNVC: 2
121345: RNCC: 3 | RNVC: 2
120420: RNCC: 6 | RNVC: 9

6 Mar 1996

5340-33-209-6048
Mounting Plate

332096048
0738001700: RNCC: 3 | RNVC: 2

19 Jan 2012

5340-33-004-4940
Manual Control Handle

330044940
07700397-1: RNCC: 3 | RNVC: 2

2 Jun 1999

5340-33-200-4664
Dust And Moisture Seal Protective Cover

332004664
WW 497 908 AE: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-33-155-0634
Dust And Moisture Seal Protective Cap-Plug

331550634
V-146: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-204-8945
No Metalico Tope

332048945
09321-10022: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-201-7758
Casquete Parabolico

332017758
B34-15C: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-33-201-4665
Double Angle Bracket

332014665
J57167835-401: RNCC: 3 | RNVC: 2

30 Jul 2002

5340-33-114-5856

5340-33-001-0041
Double Angle Bracket

330010041
35-32341-0203: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-205-4237
Double Angle Bracket

332054237
5040395: RNCC: 3 | RNVC: 2
1.143.11.048: RNCC: 5 | RNVC: 2

20 Sep 2006

5340-33-201-3980
Double Angle Bracket

332013980
A2811267-401: RNCC: 3 | RNVC: 2

5 Jul 2002

5340-33-206-7905
Angle Bracket

332067905
3301019: RNCC: 3 | RNVC: 2
IV33R272468: RNCC: 5 | RNVC: 2
9999-33-R27-2468: RNCC: 6 | RNVC: 9

23 Jun 2008

5340-33-003-0833
Dust And Moisture Seal Protective Cap-Plug

330030833
07905047-0: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-202-2068
Double Angle Bracket

332022068
NN60644G02: RNCC: 3 | RNVC: 2

25 Feb 2003

5340-33-208-7118
Webbing Strap

332087118
5700-25+2311TR-30 1500/300: RNCC: 3 | RNVC: 2

10 Jan 2011

5340-33-204-7565
Multiple Angle Bracket

332047565
5038124: RNCC: 3 | RNVC: 2
1.124.60.051.02-A: RNCC: 5 | RNVC: 2

10 Jan 2006

5340-33-108-2676
Metalico Tope

331082676
9644.121.0117: RNCC: 3 | RNVC: 2
2510011170: RNCC: 5 | RNVC: 2
2510011170: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-004-5255
Dust And Moisture Seal Protective Plug

330045255
517689: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-201-4661
Double Angle Bracket

332014661
J57167805-001: RNCC: 3 | RNVC: 2

30 Jul 2002

5340-33-211-2069
Dust And Moisture Seal Protective Cap

332112069
212-P1003-0005: RNCC: 3 | RNVC: 2

8 Jul 2013

5340-33-156-2178
Double Angle Bracket

331562178
-95821-G9500: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-108-1803
Multiple Angle Bracket

331081803
7054.252.0240: RNCC: 3 | RNVC: 2
2540700044: RNCC: 5 | RNVC: 2

29 Jan 2001

5340-33-210-6286
Mounting Bracket

332106286
39P31430: RNCC: 3 | RNVC: 2

2 Dec 2012

5340-33-204-5373
Metalico Tope

332045373
35-22041-0001S01: RNCC: 3 | RNVC: 2

10 Oct 2005

5340-33-207-6931
Mounting Plate

332076931
5039612: RNCC: 3 | RNVC: 2
1.141.72.015: RNCC: 5 | RNVC: 2

11 Aug 2009

5340-33-209-0559
Access Door Hinge

332090559
35-21350-2503: RNCC: 3 | RNVC: 2

26 May 2011

5340-33-206-7343
Dust And Moisture Seal Protective Plug

332067343
09250-08001: RNCC: 3 | RNVC: 2
09250-08001: RNCC: 5 | RNVC: 2

23 May 2008

5340-33-103-0404
Window Retaining Plate

331030404
F-1-4: RNCC: 3 | RNVC: 2

25 Jul 1995

5340-33-002-9770
Dust And Moisture Seal Protective Cap-Plug

330029770
6319972086: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-211-2183
Double Angle Bracket

332112183
TP250324: RNCC: 3 | RNVC: 2

9 Jul 2013

5340-33-103-8447
Base Nivelacion

331038447
9505-3-6-00: RNCC: 3 | RNVC: 2

12 Sep 1995

5340-33-001-4349
Double Angle Bracket

330014349
92026212: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-004-4669
Dust And Moisture Seal Protective Plug

330044669
120503: RNCC: 3 | RNVC: 2

1 Jun 1999

5340-33-190-2546
Spring Tension Clip

331902546
44308: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-0199
Utility Resilient Mount

332060199
BRB150-40SH-M12: RNCC: 3 | RNVC: 2

27 Jun 2007

5340-33-200-0231
Mechanic Equipment Hardware Kit

332000231
D0941410557: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-33-208-8636
Spacing Threaded Standoff

332088636
MAAC-290030394: RNCC: 3 | RNVC: 2

30 Mar 2011

5340-33-125-9372

5340-33-125-7420
Union Placa

5340-33-208-7247
Flush Lock

332087247
0135SR: RNCC: 3 | RNVC: 2

14 Jan 2011

5340-33-210-0393
Spring Holder

332100393
110571: RNCC: 3 | RNVC: 2

3 May 2012

5340-33-210-6186
Hinge Torsion Bar

332106186
0234036: RNCC: 3 | RNVC: 2

30 Nov 2012

5340-33-201-4666
Double Angle Bracket

332014666
J57167835-402: RNCC: 3 | RNVC: 2

30 Jul 2002

5340-33-208-5601
Manual Control Lever

332085601
R0110977: RNCC: 3 | RNVC: 2

28 Sep 2010

5340-33-108-3720
Nut And Bolt Locking Plate

331083720
8719940032: RNCC: 3 | RNVC: 2

28 Feb 2001

5340-33-002-8565
Access Cover

330028565
2420526005: RNCC: 3 | RNVC: 2
2420526005: RNCC: 5 | RNVC: 2

21 Aug 1995

5340-33-202-9927
Conjunto Placa De S

332029927
223552104-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-201-9485
Multiple Angle Bracket

332019485
A2811712-001: RNCC: 3 | RNVC: 2

20 Nov 2002

5340-33-126-1610
Acceso Tapa

5340-33-126-2992
Acceso Tapa

5340-33-126-2994
Acceso Tapa

5340-33-201-8183
Utility Resilient Mount

332018183
2510007515: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-209-9688
Butt Hinge

332099688
189045800: RNCC: 3 | RNVC: 2

16 Apr 2012

5340-33-210-9426
Utility Resilient Mount

332109426
10155086: RNCC: 3 | RNVC: 2
0738855: RNCC: 5 | RNVC: 2

10 Apr 2013

5340-33-108-2200
Spacing Threaded Standoff

331082200
9644.101.0013: RNCC: 3 | RNVC: 2
1005006316: RNCC: 5 | RNVC: 2
1005006316: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-210-1170
Rod End Connector

332101170
35-25127-2103: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-33-201-9488
Double Angle Bracket

332019488
A2811840-401: RNCC: 3 | RNVC: 2

20 Nov 2002

5340-33-003-5124
Mechanic Equipment Hardware Kit

330035124
221407017: RNCC: 3 | RNVC: 2
EN221407-17: RNCC: 5 | RNVC: 9

14 Nov 1997

5340-33-209-0495
Section Block Clamp

332090495
1025900283: RNCC: 3 | RNVC: 2

26 May 2011

5340-33-210-1079
Key Holder

332101079
CAN51013-25: RNCC: 3 | RNVC: 2

29 May 2012

5340-33-155-8732

5340-33-154-9963

5340-33-154-9912

5340-33-160-3671
Dust And Moisture Seal Protective Plug

331603671
401.285: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-209-1459
Double Angle Bracket

332091459
0751000111: RNCC: 3 | RNVC: 2

28 Jun 2011

5340-33-000-9808
Seal Retaining Plate

330009808
35-21220-0201: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-206-0410
Multiple Angle Bracket

332060410
NN60968P01: RNCC: 3 | RNVC: 2

10 Jul 2007

5340-33-201-8869
No Metalico Tope

332018869
SCM 060 NR45: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-33-107-8945
Helical Compression Spring Seat

331078945
1361460: RNCC: 3 | RNVC: 2

13 Sep 2000

5340-33-005-0039
Dust And Moisture Seal Boot

330050039
0608268700: RNCC: 3 | RNVC: 2

3 May 2000

5340-33-207-6621
Track Stop

332076621
10306003500: RNCC: 3 | RNVC: 2

23 Jul 2009

5340-33-209-1464
Mounting Bracket

332091464
150.645-300.414: RNCC: 3 | RNVC: 2
150.645-300.40: RNCC: 5 | RNVC: 2

28 Jun 2011

5340-33-000-9668
Dust And Moisture Seal Protective Cap-Plug

330009668
35-13005-0301: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-207-1392
Thumb Latch

332071392
235918: RNCC: 3 | RNVC: 2

1 Dec 2008

5340-33-209-2667
Manual Control Handle

332092667
1025901027: RNCC: 3 | RNVC: 2
9682.101.2177: RNCC: 5 | RNVC: 2

19 Sep 2011

5340-33-201-7743
Headless Straight Rod

332017743
35-22088-0001: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-33-207-6414
Mounting Plate

332076414
R0095960: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-201-1329
Nut And Bolt Locking Plate

332011329
194622: RNCC: 3 | RNVC: 2
7982208: RNCC: 5 | RNVC: 2

16 May 2002

5340-33-206-7953
Clip Retainer Plate

332067953
CBD58505P59: RNCC: 3 | RNVC: 2

25 Jun 2008

5340-33-207-2910
Butt Hinge Leaf

332072910
PR0023: RNCC: 3 | RNVC: 2

20 Feb 2009

5340-33-209-0619
Shipping And Storage Container Twistlock

332090619
AGC028136FDL: RNCC: 3 | RNVC: 2

27 May 2011

5340-33-004-1877
Dust And Moisture Seal Protective Cover

330041877
230092740: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-200-9434
Utility Resilient Mount

332009434
504669126401-2: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-33-126-4347
Mounting Bracket

331264347
C22234-A1000-B27: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-209-3562
Mechanical Stop

332093562
MAM-XFRE-05-00-11: RNCC: 3 | RNVC: 2

21 Nov 2011

5340-33-206-2684
Nut And Bolt Locking Plate

332062684
7026: RNCC: 3 | RNVC: 2
2950-33-M10-5745: RNCC: 6 | RNVC: 9

18 Oct 2007

5340-33-201-2899
Luggage: Handle Cap

332012899
35-81576-0603: RNCC: 3 | RNVC: 2

17 Jun 2002

5340-33-156-0368
Escutcheon Plate

331560368
-25337-01C01: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-208-7960
Dust And Moisture Seal Protective Cap-Plug

332087960
212-41211-03-1: RNCC: 3 | RNVC: 2

1 Mar 2011

5340-33-207-6935
Guia Izquierda

332076935
5042955: RNCC: 3 | RNVC: 2
1.141.72.022: RNCC: 5 | RNVC: 2

12 Aug 2009

5340-33-204-0181
Dust And Moisture Seal Protective Cap-Plug

332040181
CBD50520G03: RNCC: 3 | RNVC: 2

2 Feb 2005

5340-33-204-3758
Double Angle Bracket

332043758
NN60828P01: RNCC: 3 | RNVC: 2

18 Aug 2005

5340-33-155-8444
Nut And Bolt Locking Plate

331558444
8379940025: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-33-206-7966
Retaining Strap

332067966
212-55300-02-1: RNCC: 3 | RNVC: 2

25 Jun 2008

5340-33-202-5184
Dust And Moisture Seal Protective Cover

332025184
222422549-01: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-33-210-2131
Double Angle Bracket

332102131
2510010196: RNCC: 3 | RNVC: 2
9644.251.5930: RNCC: 5 | RNVC: 2

28 Jun 2012

5340-33-202-5180
Manual Control Handle

332025180
222422669-01: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-33-106-7568
Dust And Moisture Seal Protective Plug

331067568
4064608149: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-154-6091
Helical Compression Spring Seat

331546091
585823: RNCC: 3 | RNVC: 2
4011428: RNCC: 3 | RNVC: 2

1 Dec 1989

5340-33-104-7571
Hand Crank

331047571
5163.15801: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-208-9125
Dust And Moisture Seal Protective Cap-Plug

332089125
M552A1812204: RNCC: 3 | RNVC: 2

28 Apr 2011

5340-33-208-0723
Mounting Bracket

332080723
PN09-0017-M016: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-33-200-1204
Casement Fastener

332001204
322046: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-180-5247
Seal Retaining Plate

331805247
05853: RNCC: 3 | RNVC: 2
05853: RNCC: 6 | RNVC: 9

20 Jul 1995

5340-33-155-6468
Helical Compression Spring Seat

331556468
125542.61: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-203-5828
Friction Catch Housing

332035828
PCAMI/RP/29C0300003: RNCC: 3 | RNVC: 2

1 Jun 2004

5340-33-208-1473
Loop Clamp

332081473
BB48290: RNCC: 3 | RNVC: 2
M20693B: RNCC: 5 | RNVC: 9

4 Mar 2010

5340-33-209-8527
Dust And Moisture Seal Protective Cover

332098527
0227542: RNCC: 3 | RNVC: 2

20 Mar 2012

5340-33-203-7822
Air Inlet-Outlet Frame

332037822
407789: RNCC: 3 | RNVC: 2
21504691: RNCC: 5 | RNVC: 2
5000021504691: RNCC: 5 | RNVC: 2

8 Oct 2004

5340-33-107-6449
Double Angle Bracket

331076449
7356.252.0843: RNCC: 3 | RNVC: 2
2510700216: RNCC: 5 | RNVC: 2

17 Apr 2000

5340-33-002-9835
Dust And Moisture Seal Protective Cap-Plug

330029835
0616702: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-206-0510
Spring Tension Clip

332060510
24200 6K200: RNCC: 3 | RNVC: 2
24200-6K200: RNCC: 5 | RNVC: 2

13 Jul 2007

5340-33-210-0377
Turnbuckle

332100377
21801500: RNCC: 3 | RNVC: 2

3 May 2012

5340-33-209-7367
Manual Control Handle

332097367
CTP60060G201: RNCC: 3 | RNVC: 2
CTP60060G101: RNCC: 5 | RNVC: 9

15 Feb 2012

5340-33-207-0048
Mounting Bracket

332070048
TP250317: RNCC: 3 | RNVC: 2

8 Oct 2008

5340-33-115-8334
Dust And Moisture Seal Boot

331158334
307951 (2): RNCC: 3 | RNVC: 2

14 Nov 1992

5340-33-210-0604
Webbing Strap

332100604
234-B-25+5723-25 1100/350: RNCC: 3 | RNVC: 2

18 May 2012

5340-33-209-3715
Mending Plate

332093715
0738181850: RNCC: 3 | RNVC: 2

29 Nov 2011

5340-33-181-6343
Spring Loaded Cylinder Fastener

331816343
-01700397-7: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-160-4336
Mending Plate

331604336
79.32.566.524: RNCC: 3 | RNVC: 2

27 Nov 1995

5340-33-161-2151
Manual Control Handle

331612151
1015-000509: RNCC: 3 | RNVC: 2

21 Sep 1995

5340-33-201-7155
Mechanic Equipment Hardware Kit

332017155
320613: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-33-202-8750
Seal Retaining Plate

332028750
VR1250300: RNCC: 3 | RNVC: 2

17 Nov 2003

5340-33-157-7945
Double Angle Bracket

331577945
645423: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-189-2132
Double Angle Bracket

331892132
01220061: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-203-4851
Dust And Moisture Seal Protective Plug

332034851
W280684014301: RNCC: 3 | RNVC: 2

27 Apr 2004

5340-33-207-8413
Mounting Bracket

332078413
0110122: RNCC: 3 | RNVC: 2
611831-6-006: RNCC: 5 | RNVC: 2

29 Oct 2009

5340-33-160-2004
Acceso Tapa

5340-33-209-4336
Mounting Plate

332094336
INS003112060100300: RNCC: 3 | RNVC: 2

20 Dec 2011

5340-33-107-6608
Dust And Moisture Seal Protective Cap-Plug

331076608
-03902068-0: RNCC: 3 | RNVC: 2

17 Apr 2000

5340-33-105-1072
Helical Compression Spring Retainer

331051072
42320010140: RNCC: 3 | RNVC: 2
42320010140: RNCC: 3 | RNVC: 2
VB-100-C-1500: RNCC: 5 | RNVC: 2

19 Nov 1997

5340-33-105-9651
Double Angle Bracket

331059651
10.063: RNCC: 3 | RNVC: 2

20 Sep 1996

5340-33-108-4708
Spring Tension Clip

331084708
9644.250.0636: RNCC: 3 | RNVC: 2
5360000674: RNCC: 5 | RNVC: 2
5360000674: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-203-7887
Utility Resilient Mount

332037887
030.270.201: RNCC: 3 | RNVC: 2

14 Oct 2004

5340-33-207-8258
Mechanical Stop

332078258
DF 306 323 A: RNCC: 3 | RNVC: 2

27 Oct 2009

5340-33-106-0793
Helical Compression Spring Seat

331060793
25.151: RNCC: 3 | RNVC: 2

20 Feb 1997

5340-33-204-6099
Spring Tension Clip

332046099
78991-78001: RNCC: 3 | RNVC: 2

3 Nov 2005

5340-33-108-1822
Multiple Angle Bracket

331081822
7054.252.0790: RNCC: 3 | RNVC: 2
2540700045: RNCC: 5 | RNVC: 2

29 Jan 2001

5340-33-211-2977
Double Angle Bracket

332112977
TP252825: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-33-205-6654
Nonmetallic Solid Wheel

332056654
150.519-112: RNCC: 3 | RNVC: 2

15 Feb 2007

5340-33-208-7499
Flush Catch Claw

332087499
DG01000-02: RNCC: 3 | RNVC: 2

1 Feb 2011

5340-33-207-4999
Mounting Bracket

332074999
D57273: RNCC: 3 | RNVC: 2

18 May 2009

5340-33-209-5486
Lock Bar

332095486
INS5590/001: RNCC: 3 | RNVC: 2

17 Jan 2012

5340-33-002-1804
Semiabrazadera Dere

330021804
620811-1: RNCC: 3 | RNVC: 2
4210-000051: RNCC: 5 | RNVC: 2

13 Jul 1993

5340-33-208-5007
Mounting Plate

332085007
INS003112990090000: RNCC: 3 | RNVC: 2

28 Jul 2010

5340-33-209-5700
Access Cover

332095700
2510005407: RNCC: 3 | RNVC: 2
0640.810.0082: RNCC: 5 | RNVC: 2

18 Jan 2012

5340-33-202-4889
Handwheel

332024889
2.135.113-A: RNCC: 3 | RNVC: 2
5033480: RNCC: 5 | RNVC: 2

14 Jul 2003

5340-33-116-2280
Manual Control Handle

331162280
A-220.730: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-5987
Double Angle Bracket

332055987
5020671: RNCC: 3 | RNVC: 2
1.091.21.023: RNCC: 5 | RNVC: 2

5 Jan 2007

Load More Results