What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 37 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 37 of 39

5340-33-102-0554
Bloqueo El Pestillo

331020554
2510-000423: RNCC: 3 | RNVC: 2
2510000423: RNCC: 5 | RNVC: 2
411.090.0560: RNCC: 5 | RNVC: 2

2 Jan 1995

5340-33-106-5667
Dust And Moisture Seal Protective Plug

331065667
0810879: RNCC: 3 | RNVC: 2
0810879: RNCC: 5 | RNVC: 2

9 Jul 1998

5340-33-000-2040
Dust And Moisture Seal Protective Plug

330002040
170410: RNCC: 1 | RNVC: 2

11 Dec 1986

5340-33-157-8150
Double Angle Bracket

331578150
735819: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-33-157-8032
Double Angle Bracket

331578032
698411: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-200-4371
Mechanic Equipment Hardware Kit

332004371
7060.252.0060: RNCC: 3 | RNVC: 2
2510700301: RNCC: 5 | RNVC: 2

28 Jan 2002

5340-33-003-2489
Mechanic Equipment Hardware Kit

330032489
221022400: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-33-204-5440
Escutcheon Plate

332045440
SP22015: RNCC: 3 | RNVC: 2

10 Oct 2005

5340-33-103-9895
Hand Crank

331039895
975001731: RNCC: 3 | RNVC: 2

3 Jan 1995

5340-33-116-8043
Manual Control Handle

331168043
01.00325/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-3727
Sealing Plug Assembly

332043727
00518005: RNCC: 3 | RNVC: 2

29 Jul 2005

5340-33-210-9430
Mechanic Equipment Hardware Kit

332109430
37-13098-0001: RNCC: 3 | RNVC: 2

10 Apr 2013

5340-33-210-6638
Mounting Plate

332106638
060533A-00: RNCC: 3 | RNVC: 2

19 Dec 2012

5340-33-204-4353
Spring Tension Clip

332044353
768082: RNCC: 3 | RNVC: 2

14 Sep 2005

5340-33-211-2620
Double Angle Bracket

332112620
TP250290: RNCC: 3 | RNVC: 2

1 Aug 2013

5340-33-206-0690
Multiple Angle Bracket

332060690
NN60971G01: RNCC: 3 | RNVC: 2

20 Jul 2007

5340-33-200-6681
Sealing Plug Assembly

332006681
318989: RNCC: 3 | RNVC: 2

22 Feb 2002

5340-33-202-0676
Manual Control Lever

332020676
CFAMET-E17-01-12: RNCC: 3 | RNVC: 2
CFAMET-E17-01-12: RNCC: 5 | RNVC: 9

3 Jan 2003

5340-33-208-0063
Flush Catch Claw

332080063
AC-630000: RNCC: 3 | RNVC: 2
10-21293-0001: RNCC: 5 | RNVC: 2

8 Jan 2010

5340-33-116-5780
Seal Retaining Plate

331165780
28445-ZE1-003: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-8645
Mounting Plate

331168645
598/11-2: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-158-5357
Sealing Plug Assembly

331585357
-06902431-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-102-0726
Dust And Moisture Seal Protective Cap

331020726
C-2-21: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-208-3991
Filler Opening Cap

332083991
CCBM1619000: RNCC: 3 | RNVC: 2
CP25/130-6511: RNCC: 5 | RNVC: 2
BACCBM1619000SE: RNCC: 5 | RNVC: 2

11 May 2010

5340-33-201-4455
Multiple Angle Bracket

332014455
W290684606500: RNCC: 3 | RNVC: 2

22 Jul 2002

5340-33-004-5284
Spring Holder

330045284
7705378993: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-204-3493
Nut And Bolt Locking Plate

332043493
PS-310034: RNCC: 3 | RNVC: 2

19 Jul 2005

5340-33-207-6944
Corrosion Preventive Anode

332076944
6H3-11325-01: RNCC: 3 | RNVC: 2

12 Aug 2009

5340-33-000-5910
Manual Control Handle

330005910
4925000112: RNCC: 1 | RNVC: 2
4925-000112: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-206-6209
Access Cover

332066209
SM2004007: RNCC: 3 | RNVC: 2

26 Mar 2008

5340-33-003-7727
Dust And Moisture Seal Protective Cap

330037727
0114007: RNCC: 3 | RNVC: 2

5 Jun 1998

5340-33-102-9729
Dust And Moisture Seal Protective Cap

331029729
221406182: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-33-200-3428
Dust And Moisture Seal Protective Cap

332003428
102 236/E: RNCC: 3 | RNVC: 2

11 Jan 2002

5340-33-209-5577
Access Cover

332095577
0738045400: RNCC: 3 | RNVC: 2

17 Jan 2012

5340-33-203-4983
Seal Retaining Plate

332034983
NN60880P01: RNCC: 3 | RNVC: 2

30 Apr 2004

5340-33-211-5206
Utility Resilient Mount

332115206
35.1143.40: RNCC: 3 | RNVC: 2
2422-1300.17: RNCC: 5 | RNVC: 2

24 Nov 2013

5340-33-201-0428
Utility Resilient Mount

332010428
5340000947: RNCC: 3 | RNVC: 2
5340000947: RNCC: 5 | RNVC: 2

24 Apr 2002

5340-33-103-8402
Helical Compression Spring Retainer

331038402
X-25: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-105-2393
Helical Compression Spring Seat

331052393
-03902597-0: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-004-5244
Dust And Moisture Seal Protective Plug

330045244
0650618: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-000-2861
Helical Compression Spring Seat

330002861
646887: RNCC: 1 | RNVC: 2
646887: RNCC: 3 | RNVC: 2
646887: RNCC: 6 | RNVC: 9

22 May 1987

5340-33-204-6232
Dust And Moisture Seal Protective Cap

332046232
38861-86CA0: RNCC: 3 | RNVC: 2

8 Nov 2005

5340-33-209-6114
Angle Bracket

332096114
0770160110: RNCC: 3 | RNVC: 2

20 Jan 2012

5340-33-116-0352
Double Angle Bracket

331160352
BL-13155100: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-0486
Double Angle Bracket

330000486
AH350GS/D021/28: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-207-8197
Surface Bolt

332078197
A901611-003: RNCC: 3 | RNVC: 2

23 Oct 2009

5340-33-205-2436
B Tubular Soporte

332052436
CBD56501G12: RNCC: 3 | RNVC: 2

30 Jun 2006

5340-33-001-1154
Manual Control Handle

330011154
35-49106-0301: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-210-6538
Safety Cable Kit

332106538
101090112100: RNCC: 3 | RNVC: 2
101090112100/1.0: RNCC: 3 | RNVC: 2

17 Dec 2012

5340-33-204-7186
Double Angle Bracket

332047186
PS-901747: RNCC: 3 | RNVC: 2

16 Dec 2005

5340-33-206-2076
Parach Goma Banda

332062076
6173407: RNCC: 3 | RNVC: 2

26 Sep 2007

5340-33-209-6231
Mounting Plate

332096231
0750030151: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-33-211-2605
Double Angle Bracket

332112605
TP252124: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-33-204-5486
Dust And Moisture Seal Protective Cap

332045486
D0941411551: RNCC: 3 | RNVC: 2

11 Oct 2005

5340-33-206-8096
Loop Clamp

332068096
95777-60151: RNCC: 3 | RNVC: 2
95777-60151: RNCC: 5 | RNVC: 2

1 Jul 2008

5340-33-000-4420
Nut And Bolt Locking Plate

330004420
563485: RNCC: 1 | RNVC: 3

28 Dec 1987

5340-33-190-2545
Spring Tension Clip

331902545
44346: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-004-8771
Instrument Mounting Clamp

330048771
NRN60011P15: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-33-201-4688
Multiple Angle Bracket

332014688
NN60611P01: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-211-2575
Double Angle Bracket

332112575
TP220288: RNCC: 3 | RNVC: 2

30 Jul 2013

5340-33-160-3222
Flush Lock

331603222
16.61: RNCC: 3 | RNVC: 9

21 Sep 1995

5340-33-206-7338
Mechanical Stop

332067338
PS-810073: RNCC: 3 | RNVC: 2

22 May 2008

5340-33-210-2901
Bow Handle

332102901
35-82295-0002: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-33-200-1533
Manual Control Lever

332001533
N-411000: RNCC: 3 | RNVC: 2

16 Oct 2001

5340-33-116-4459
Spring Tension Clip

331164459
C-52-M: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-3820
Utility Resilient Mount

332013820
31-4.1.03: RNCC: 3 | RNVC: 2

2 Jul 2002

5340-33-181-6653
Double Angle Bracket

331816653
-03500387-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-190-5566
Sealing Plug Assembly

331905566
K299521: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-004-5245
Dust And Moisture Seal Protective Plug

330045245
60206108300: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-210-8825
Double Angle Bracket

332108825
49907793: RNCC: 3 | RNVC: 2
3465900004: RNCC: 5 | RNVC: 2

18 Mar 2013

5340-33-201-4285
Double Angle Bracket

332014285
1025-901667: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-33-188-8319
Casement Fastener

331888319
6101033: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-108-0787
Manual Control Lever

331080787
2510.003417: RNCC: 3 | RNVC: 2

28 Dec 2000

5340-33-004-6454
Dust And Moisture Seal Boot

330046454
30627-E3400: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-003-0830
Fiador Tope

330030830
07905041-0: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-201-0607
Dust And Moisture Seal Protective Plug

332010607
98.A.002.13: RNCC: 3 | RNVC: 2
98.A.002.13: RNCC: 5 | RNVC: 2

24 Apr 2002

5340-33-204-8956
No Metalico Tope

332048956
09320-10020: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-181-8904
No Metalico Tope

331818904
-16300301-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-207-5147
Mounting Bracket

332075147
RQCZ-006-772-00: RNCC: 3 | RNVC: 2

27 May 2009

5340-33-190-5717
Headless Straight Rod

331905717
K43187794-001: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-206-8220
Electronic Equipment Hardware Kit

332068220
INS010100030000000: RNCC: 3 | RNVC: 2

8 Jul 2008

5340-33-208-0901
Double Angle Bracket

332080901
105157: RNCC: 3 | RNVC: 2

16 Feb 2010

5340-33-207-8183
Mounting Plate

332078183
5051011: RNCC: 3 | RNVC: 2
8.496.001.02: RNCC: 5 | RNVC: 2

23 Oct 2009

5340-33-003-4073
Helical Compression Spring Seat

330034073
11.32272-0003: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-154-7224
Helical Compression Spring Seat

331547224
173662: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-33-200-1203
Multiple Angle Bracket

332001203
322042: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-181-6332
Multiple Angle Bracket

331816332
-01700353-2: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-181-7262
No Metalico Tope

331817262
-06600660-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-210-7059
Utility Resilient Mount

332107059
LMR-003SH: RNCC: 3 | RNVC: 2

21 Jan 2013

5340-33-206-9685
Spacing Threaded Standoff

332069685
F3-20206: RNCC: 3 | RNVC: 2

30 Sep 2008

5340-33-161-3815
Multiple Angle Bracket

331613815
630316: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-102-0385
Hand Crank

331020385
2510-000169: RNCC: 3 | RNVC: 2
2510000169: RNCC: 5 | RNVC: 2
411.096.6615: RNCC: 5 | RNVC: 2

6 Aug 1992

5340-33-210-0596
Webbing Strap

332100596
235-WH3-50+232-50 1200/300: RNCC: 3 | RNVC: 2

18 May 2012

5340-33-206-7825
Mounting Plate

332067825
PS-912242: RNCC: 3 | RNVC: 2

19 Jun 2008

5340-33-207-6309
Multiple Angle Bracket

332076309
R0096177: RNCC: 3 | RNVC: 2

16 Jul 2009

5340-33-160-7501
Helical Compression Spring Seat

331607501
91.509.174.80: RNCC: 3 | RNVC: 2
PS-750004: RNCC: 5 | RNVC: 2

20 Jul 1995

5340-33-181-3545
No Metalico Tope

331813545
-01500294-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-202-4884
Anillo Porta Fusibl

332024884
2.135.103-A: RNCC: 3 | RNVC: 2
5029135: RNCC: 5 | RNVC: 2

11 Jul 2003

5340-33-161-3131
Nut And Bolt Locking Plate

331613131
515934: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-004-6469
Dust And Moisture Seal Protective Cap

330046469
0108619: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-103-2338
Arandela Embolo

331032338
1055-000296: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-166-1240
Dust And Moisture Seal Protective Plug

331661240
21310: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-106-5615
Dust And Moisture Seal Protective Cap

331065615
10105005-1: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-33-207-9947
Mounting Bracket

332079947
42.08.60.3200.2: RNCC: 3 | RNVC: 2

22 Dec 2009

5340-33-000-6448
Helical Compression Spring Seat

330006448
126431 95: RNCC: 1 | RNVC: 2

15 Jun 1988

5340-33-102-0739
Hand Crank

331020739
C-2-23: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-203-7576
Manual Control Handle

332037576
M410243: RNCC: 3 | RNVC: 2
PCAMI/RP/0800000M410243: RNCC: 5 | RNVC: 1

18 Sep 2004

5340-33-207-3516
Hand Crank

332073516
NV-300100: RNCC: 3 | RNVC: 2

10 Mar 2009

5340-33-003-3998
Helical Compression Spring Seat

330033998
11.20072-0076: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-208-6791
Corner Brace

332086791
363000114-007: RNCC: 3 | RNVC: 2

2 Dec 2010

5340-33-206-2942
Spring Tension Clip

332062942
C-103: RNCC: 3 | RNVC: 2

29 Oct 2007

5340-33-107-3008
Spacing Threaded Standoff

331073008
21124135000: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-207-1967
Angle Bracket

332071967
40P31255: RNCC: 3 | RNVC: 2

13 Jan 2009

5340-33-207-6268
Door Holder

332076268
PR0003: RNCC: 3 | RNVC: 2

14 Jul 2009

5340-33-202-0969
Double Angle Bracket

332020969
49P40773 02 03: RNCC: 3 | RNVC: 2

10 Jan 2003

5340-33-201-1582
Electronic Equipment Hardware Kit

332011582
ET4290001775B: RNCC: 3 | RNVC: 2

17 May 2002

5340-33-203-9124
Utility Resilient Mount

332039124
SCM125NR60: RNCC: 3 | RNVC: 2

10 Jan 2005

5340-33-125-7993
Union Placa

5340-33-203-7069
No Metalico Tope

332037069
999010234: RNCC: 3 | RNVC: 2
999010234: RNCC: 5 | RNVC: 2

9 Sep 2004

5340-33-160-2982
Angular Soporte

5340-33-102-2381

5340-33-160-2828
Cancamo

5340-33-160-2817
Sujecion Brida

5340-33-105-9865
Double Angle Bracket

331059865
1306J00220: RNCC: 3 | RNVC: 2

7 May 1999

5340-33-108-4114
Mango: Empunadura

5340-33-206-3504
Utility Resilient Mount

332063504
E4330-F11: RNCC: 3 | RNVC: 2

22 Nov 2007

5340-33-106-7727
Dust And Moisture Seal Protective Cover

331067727
M040101-07D: RNCC: 3 | RNVC: 2

15 Mar 1999

5340-33-001-8816
Hand Crank

330018816
325.9.913: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-106-4721
Metalico Tope

331064721
98480269: RNCC: 3 | RNVC: 2

6 Mar 1998

5340-33-116-1842
Helical Compression Spring Seat

331161842
3 127 492: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-5221
Lock Bar

332075221
1.120.28.01.022: RNCC: 3 | RNVC: 2

29 May 2009

5340-33-207-4785
Mounting Bracket

332074785
35-51257-0001: RNCC: 3 | RNVC: 2

23 Apr 2009

5340-33-209-3832
Block Clamp

332093832
95-82223-0101: RNCC: 3 | RNVC: 2

30 Nov 2011

5340-33-204-8955
No Metalico Tope

332048955
36116-22630: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-207-2076
Mounting Bracket

332072076
PCMSABMR139: RNCC: 3 | RNVC: 2

16 Jan 2009

5340-33-202-1324
Double Angle Bracket

332021324
5031239: RNCC: 3 | RNVC: 2

28 Jan 2003

5340-33-201-8107
Mechanic Equipment Hardware Kit

332018107
319768: RNCC: 3 | RNVC: 2

25 Oct 2002

5340-33-206-2494
Dust And Moisture Seal Protective Cap-Plug

332062494
35-82840-1601: RNCC: 3 | RNVC: 2

11 Oct 2007

5340-33-209-1895
Mounting Plate

332091895
9743.100.1326: RNCC: 3 | RNVC: 2
1025902345: RNCC: 5 | RNVC: 2

14 Jul 2011

5340-33-205-3425
Helical Compression Spring Seat

332053425
EN222109-247: RNCC: 3 | RNVC: 2

17 Aug 2006

5340-33-003-2855
Mechanic Equipment Hardware Kit

330032855
221024965: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-210-4761
Access Cover

332104761
AU_1107_PZA1: RNCC: 3 | RNVC: 2

9 Oct 2012

5340-33-206-4971
Mounting Bracket

332064971
1359050000: RNCC: 3 | RNVC: 2
135905: RNCC: 5 | RNVC: 2

8 Feb 2008

5340-33-188-8011
Spring Tension Clip

331888011
3 170 338: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-33-207-0293
Mounting Plate

332070293
YC362-5-Z-C: RNCC: 3 | RNVC: 2

16 Oct 2008

5340-33-160-7863
Manual Control Handle

331607863
6469.38: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-160-7771
Manual Control Handle

331607771
2403.33: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-201-4175
Utility Resilient Mount

332014175
-11323-G9602: RNCC: 3 | RNVC: 2
11323-G9602: RNCC: 6 | RNVC: 9

9 Jul 2002

5340-33-001-3443
Spring Holder

330013443
92014677: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-200-3725
Dust And Moisture Seal Boot

332003725
C 6673 124: RNCC: 3 | RNVC: 2

21 Jan 2002

5340-33-158-1435
Flush Lock

331581435
507052: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-8744

5340-33-202-0409
Headless Straight Rod

332020409
584787: RNCC: 3 | RNVC: 2

30 Dec 2002

5340-33-103-7803
Manual Control Handle

331037803
-06905186-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-2039
Dust And Moisture Seal Protective Plug

330002039
170212: RNCC: 1 | RNVC: 2

11 Dec 1986

5340-33-200-1412
Manual Control Lever

332001412
9644.250.0200: RNCC: 3 | RNVC: 2
2510006633: RNCC: 5 | RNVC: 2
2510006633: RNCC: 5 | RNVC: 2

11 Oct 2001

5340-33-200-2071
Double Angle Bracket

332002071
J92562120-401: RNCC: 3 | RNVC: 2

5 Nov 2001

5340-33-190-5549
Sealing Plug Assembly

331905549
K43164020-001: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-207-1460
Double Angle Bracket

332071460
980643: RNCC: 3 | RNVC: 2

2 Dec 2008

5340-33-207-5811
Dust And Moisture Seal Protective Plug

332075811
35-21184-0203: RNCC: 3 | RNVC: 2

2 Jul 2009

5340-33-161-3491
No Metalico Tope

331613491
577008: RNCC: 3 | RNVC: 2
62100100: RNCC: 5 | RNVC: 9

28 Apr 1995

5340-33-204-7183
Dust And Moisture Seal Protective Cap-Plug

332047183
PS-911778: RNCC: 3 | RNVC: 2

16 Dec 2005

5340-33-200-9646
Dust And Moisture Seal Boot

332009646
212-21210-1: RNCC: 3 | RNVC: 2

18 Apr 2002

5340-33-188-7438
Double Angle Bracket

331887438
9.325.1.632.001.4: RNCC: 3 | RNVC: 2

3 Apr 1996

5340-33-208-3320
Bumper

332083320
M18041: RNCC: 3 | RNVC: 2

12 Apr 2010

5340-33-209-9817
Access Cover

332099817
189103400: RNCC: 3 | RNVC: 2

18 Apr 2012

5340-33-126-6197
Instrument Mounting Clamp

331266197
PT17131: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-0564
Dust And Moisture Seal Protective Cap

332020564
1025-900453: RNCC: 3 | RNVC: 2

2 Jan 2003

5340-33-108-3917
Dust And Moisture Seal Protective Cap-Plug

331083917
8793 189-001: RNCC: 3 | RNVC: 2

28 Feb 2001

5340-33-210-5296
Lock-Release Lever

332105296
35-22135-0101: RNCC: 3 | RNVC: 2

25 Oct 2012

5340-33-207-3498
Webbing Strap

332073498
PS-110170: RNCC: 3 | RNVC: 2

10 Mar 2009

5340-33-206-6558
Manual Control Lever

332066558
CF 304 664 B: RNCC: 3 | RNVC: 2

14 Apr 2008

5340-33-206-6274
Mounting Bracket

332066274
291042-7: RNCC: 3 | RNVC: 2

27 Mar 2008

5340-33-103-2436
Manual Control Lever

331032436
1055-000350: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-1350
Dust And Moisture Seal Protective Cap

331161350
ZC-18296150: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-0768
Multiple Angle Bracket

332060768
NN60954P01: RNCC: 3 | RNVC: 2

26 Jul 2007

5340-33-205-4424
Base Nivel Indicado

332054424
5040690: RNCC: 3 | RNVC: 2
1.143.51.010.03: RNCC: 5 | RNVC: 2

29 Sep 2006

5340-33-116-5280
Helical Compression Spring Seat

331165280
4002881: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-208-4895
Bumper

332084895
A330-92090-0001: RNCC: 3 | RNVC: 2

23 Jul 2010

5340-33-201-4667
Double Angle Bracket

332014667
J57167840-003: RNCC: 3 | RNVC: 2

30 Jul 2002

5340-33-201-3989
Double Angle Bracket

332013989
A2811863-001: RNCC: 3 | RNVC: 2

5 Jul 2002

5340-33-201-3976
Double Angle Bracket

332013976
A2810479-001: RNCC: 3 | RNVC: 2

5 Jul 2002

5340-33-204-9985
Dust And Moisture Seal Boot

332049985
59303-14500: RNCC: 3 | RNVC: 2

30 Mar 2006

5340-33-211-5789
Manual Control Lever

332115789
35-21270-0503A01: RNCC: 3 | RNVC: 2

3 Dec 2013

5340-33-004-6464
Dust And Moisture Seal Protective Cap

330046464
236548: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-107-1322
Strap Hinge Leaf

331071322
61060280101: RNCC: 3 | RNVC: 2
PCAMI/RP/0306028011: RNCC: 6 | RNVC: 9

30 Jun 1999

5340-33-208-7764
Webbing Strap

332087764
235-WH3-50+232-5 400/350: RNCC: 3 | RNVC: 2

21 Feb 2011

5340-33-108-4265
No Metalico Tope

331084265
9644.250.0861: RNCC: 3 | RNVC: 2
2510008536: RNCC: 5 | RNVC: 2
2510008536: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-004-8773
Instrument Mounting Clamp

330048773
NRN60011P18: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-33-207-8651
Mounting Bracket

332078651
999145063: RNCC: 3 | RNVC: 2
999145063: RNCC: 5 | RNVC: 2

6 Nov 2009

5340-33-210-0618
Webbing Strap

332100618
5700-25+5768-25 750/375: RNCC: 3 | RNVC: 2

18 May 2012

5340-33-207-8585
Loop Clamp

332078585
J28665290-401: RNCC: 3 | RNVC: 2

4 Nov 2009

5340-33-208-4903
Mounting Bracket

332084903
ME201029: RNCC: 3 | RNVC: 2
ME201029: RNCC: 5 | RNVC: 2
2930-33-R07-2935: RNCC: 6 | RNVC: 9

23 Jul 2010

5340-33-209-5634
Mounting Plate

332095634
0738035570: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-33-202-5577
Seal Retaining Plate

332025577
95-11533-0001: RNCC: 3 | RNVC: 2

19 Aug 2003

5340-33-203-0816
Dust And Moisture Seal Protective Cover

332030816
212-21001-21.1: RNCC: 3 | RNVC: 2

28 Jan 2004

5340-33-160-7526
Dust And Moisture Seal Protective Cap

331607526
79.03.074.004: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-206-9294
Mounting Bracket

332069294
CMA128-5: RNCC: 3 | RNVC: 2

19 Sep 2008

5340-33-106-3977
Spring Tension Clip

331063977
-63848-01B60: RNCC: 3 | RNVC: 2
-63812-U7400: RNCC: 5 | RNVC: 2
-63848-01860: RNCC: 5 | RNVC: 2

11 Dec 1997

5340-33-209-4009
Rod End Clevis

332094009
0738046300: RNCC: 3 | RNVC: 2

1 Dec 2011

5340-33-206-8326
Mounting Bracket

332068326
150.546-100.40.10.01: RNCC: 3 | RNVC: 2

15 Jul 2008

5340-33-207-7102
Threaded Rod End

332077102
35-81296-0201: RNCC: 3 | RNVC: 2

9 Sep 2009

5340-33-002-1746
Bush-

330021746
35-31212-1401: RNCC: 3 | RNVC: 2

12 Jul 1993

5340-33-207-6417
Mounting Plate

332076417
R0092872: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-207-6704
Pad Eye

332076704
R0097267: RNCC: 3 | RNVC: 2

29 Jul 2009

5340-33-155-7872
Double Angle Bracket

331557872
784271: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-157-7810
Dust And Moisture Seal Protective Cap

331577810
621363: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-180-7277
Nut And Bolt Locking Plate

331807277
277311: RNCC: 3 | RNVC: 2
277311: RNCC: 6 | RNVC: 9

20 Jul 1995

5340-33-160-3833
Spring Tension Clip

331603833
93.501.448: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-4083
Retaining Strap

332074083
36990-86CA0: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-33-205-8070
Spring Tension Clip

332058070
A610308-000: RNCC: 3 | RNVC: 2

11 Apr 2007

5340-33-203-2948
Dust And Moisture Seal Protective Cover

332032948
5035564: RNCC: 3 | RNVC: 2

24 Feb 2004

5340-33-209-2022
Dust And Moisture Seal Protective Cap-Plug

332092022
MAAC030100000050: RNCC: 3 | RNVC: 2

19 Jul 2011

5340-33-000-2430
Nut And Bolt Locking Plate

330002430
710986: RNCC: 1 | RNVC: 2
710986: RNCC: 3 | RNVC: 2

22 May 1987

5340-33-004-5256
Dust And Moisture Seal Protective Plug

330045256
607172: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-208-7669
Spacing Threaded Standoff

332087669
35-62209-0305: RNCC: 3 | RNVC: 2

16 Feb 2011

5340-33-108-2100
Helical Compression Spring Seat

331082100
0640.250.0003: RNCC: 3 | RNVC: 2
1005004117: RNCC: 5 | RNVC: 2
1005004117: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-207-6473
Access Cover

332076473
10-62005-0301: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-209-5748
Manual Control Lever

332095748
0738109900: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-33-208-0229
Mounting Bracket

332080229
0853722000000: RNCC: 3 | RNVC: 2

19 Jan 2010

5340-33-208-1653
Angle Bracket

332081653
INS003096990110000: RNCC: 3 | RNVC: 2

11 Mar 2010

5340-33-106-2147
Metalico Tope

331062147
921844: RNCC: 3 | RNVC: 2

27 Oct 1997

5340-33-209-9429
Escutcheon Plate

332099429
32612-31: RNCC: 3 | RNVC: 2
5930-33-N00-1295: RNCC: 6 | RNVC: 9

3 Apr 2012

5340-33-210-0599
Webbing Strap

332100599
235-WH3-50+2311VTR-50 600/250: RNCC: 3 | RNVC: 2

18 May 2012

5340-33-207-9489
Bumper

332079489
175098: RNCC: 3 | RNVC: 2

9 Dec 2009

5340-33-208-0659
Doorknob

332080659
112632501: RNCC: 3 | RNVC: 2
5340900063: RNCC: 5 | RNVC: 2

8 Feb 2010

5340-33-206-8613
Mechanic Equipment Hardware Kit

332068613
2667051A: RNCC: 3 | RNVC: 2

22 Jul 2008

5340-33-103-8422
Helical Compression Spring Retainer

331038422
X-45: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-3883
Webbing Strap

332073883
235324: RNCC: 3 | RNVC: 2
235391: RNCC: 5 | RNVC: 2

25 Mar 2009

5340-33-208-0999
Mounting Bracket

332080999
5017014: RNCC: 3 | RNVC: 2
1.077.11.005: RNCC: 5 | RNVC: 2

19 Feb 2010

5340-33-209-9435
Escutcheon Plate

332099435
32620-31: RNCC: 3 | RNVC: 2

3 Apr 2012

5340-33-102-0700
Butt Hinge Leaf

331020700
21-1: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-102-1629
Double Angle Bracket

331021629
MBCE-4-17: RNCC: 3 | RNVC: 2
MBCE-4-17: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-210-0613
Webbing Strap

332100613
ABS-2 01155 1400/300: RNCC: 3 | RNVC: 2

18 May 2012

5340-33-208-8490
Mounting Plate

332088490
INS003020990010000: RNCC: 3 | RNVC: 2

24 Mar 2011

5340-33-158-9819
Manual Control Handle

331589819
00.170.869.XX: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-7093
Double Angle Bracket

330047093
NN60071P01: RNCC: 3 | RNVC: 2

10 Sep 1999

5340-33-205-0738
Spring Tension Clip

332050738
59315-13E00: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-33-206-9630
Mounting Bracket

332069630
206153126: RNCC: 3 | RNVC: 2

29 Sep 2008

5340-33-210-6768
Mounting Plate

332106768
061178A-00: RNCC: 3 | RNVC: 2

20 Dec 2012

5340-33-203-2052
Utility Resilient Mount

332032052
5340900075: RNCC: 3 | RNVC: 2
5340900075: RNCC: 5 | RNVC: 2

16 Feb 2004

5340-33-107-7014
Mechanic Equipment Hardware Kit

331077014
7562.252.1210: RNCC: 3 | RNVC: 2
1055700002: RNCC: 5 | RNVC: 2

17 Apr 2000

5340-33-209-5908
Corrosion Preventive Anode

332095908
ZG-2: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-33-001-0062
Fitting

330010062
35-33226-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-209-4058
Cover Strip

332094058
DF 405 322 A: RNCC: 3 | RNVC: 2

1 Dec 2011

5340-33-209-1391
Mounting Bracket

332091391
5051029: RNCC: 3 | RNVC: 2

22 Jun 2011

5340-33-209-6263
Access Cover

332096263
0750035401: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-33-180-5599
Barra Tensor Marqui

331805599
154515: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-209-4682
Mounting Plate

332094682
0664.20.1007.04: RNCC: 3 | RNVC: 2

27 Dec 2011

5340-33-209-6099
Double Angle Bracket

332096099
0750036400: RNCC: 3 | RNVC: 2

20 Jan 2012

5340-33-116-8400
Dust And Moisture Seal Protective Cap-Plug

331168400
M4T403-01-15: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-2286
Webbing Strap

332072286
6441-0002-10: RNCC: 3 | RNVC: 2

23 Jan 2009

5340-33-187-2683
Nonmetallic Solid Wheel

331872683
3/150: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-001-2549
Dust And Moisture Seal Protective Cap-Plug

330012549
CA41200-07: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-210-5514
Dust And Moisture Seal Protective Cap

332105514
BM-9: RNCC: 3 | RNVC: 2

14 Nov 2012

5340-33-201-4221
Double Angle Bracket

332014221
A2810450-001: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-33-002-9549
No Metalico Tope

330029549
6317230072: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-211-2602
Double Angle Bracket

332112602
TP252792: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-33-181-1413
Dust And Moisture Seal Protective Cap-Plug

331811413
-28882-G9701: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-153-8933
Manual Control Handle

331538933
576936: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-211-4139
Double Angle Bracket

332114139
62022204: RNCC: 3 | RNVC: 2

24 Oct 2013

5340-33-001-1739
Ball

330011739
35-61393-0103: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-004-5246
Dust And Moisture Seal Protective Plug

330045246
AC-84238001: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-107-8480
Dust And Moisture Seal Protective Cap

331078480
-16590-40L05: RNCC: 3 | RNVC: 2
-16590-40L15: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-33-210-5023
Corrosion Preventive Anode

332105023
Z-2.687: RNCC: 3 | RNVC: 2

18 Oct 2012

5340-33-202-5498
Utility Resilient Mount

332025498
W290684801800: RNCC: 3 | RNVC: 2

13 Aug 2003

5340-33-209-6014
Corrosion Preventive Anode

332096014
Z-1N: RNCC: 3 | RNVC: 2

19 Jan 2012

5340-33-210-1820
Rigid Caster

332101820
410-100: RNCC: 3 | RNVC: 2
82545011: RNCC: 5 | RNVC: 2

15 Jun 2012

5340-33-106-8030
Dust And Moisture Seal Boot

331068030
R662102-07: RNCC: 3 | RNVC: 2

31 Mar 1999

5340-33-102-5687
Multiple Angle Bracket

331025687
9358-03-06: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-9760
Butt Hinge Leaf

332079760
35-21350-2501: RNCC: 3 | RNVC: 2

16 Dec 2009

5340-33-207-9467
Double Angle Bracket

332079467
J57166502-005: RNCC: 3 | RNVC: 2

9 Dec 2009

5340-33-002-9294
No Metalico Tope

330029294
6313100477: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-206-1961
Clip Retainer Plate

332061961
CBD58505P53: RNCC: 3 | RNVC: 2

24 Sep 2007

5340-33-209-1208
Angle Bracket

332091208
0750029621: RNCC: 3 | RNVC: 2

16 Jun 2011

5340-33-158-5531
Helical Compression Spring Seat

331585531
-33415118: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-208-8109
Mounting Bracket

332088109
4113-101: RNCC: 3 | RNVC: 2

4 Mar 2011

5340-33-181-1123
Nut And Bolt Locking Plate

331811123
-76918-G972X: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-158-1451
Helical Compression Spring Seat

331581451
567624: RNCC: 3 | RNVC: 2
567624: RNCC: 3 | RNVC: 2
81100051: RNCC: 5 | RNVC: 9

11 Jul 1995

5340-33-181-1183
Escutcheon Plate

331811183
-90608-C8200: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-114-5129
Helical Compression Spring Seat

331145129
6 ILA 2-17: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-204-8705
Spring Tension Clip

332048705
PS-910741: RNCC: 3 | RNVC: 2

17 Feb 2006

5340-33-002-2582
Dust And Moisture Seal Protective Plug

330022582
710-016-64000: RNCC: 3 | RNVC: 2

24 Mar 1994

5340-33-155-0416
Sombrerete

331550416
A319A: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-208-3727
Threaded Rod End

332083727
212-62139-09-1: RNCC: 3 | RNVC: 2

26 Apr 2010

5340-33-208-5271
Buckle

332085271
XX-326103060100: RNCC: 3 | RNVC: 2
326103060100: RNCC: 5 | RNVC: 2
717331171003: RNCC: 6 | RNVC: 9

6 Sep 2010

5340-33-210-5026
Corrosion Preventive Anode

332105026
ZG-4: RNCC: 3 | RNVC: 2

18 Oct 2012

5340-33-202-4891
Leva Fusible Mecani

332024891
2.135.143-A: RNCC: 3 | RNVC: 2
5033568: RNCC: 5 | RNVC: 2

14 Jul 2003

5340-33-208-5335
Access Cover

332085335
GIY2580200: RNCC: 3 | RNVC: 2

10 Sep 2010

5340-33-209-0604
Access Cover

332090604
M361A4239200: RNCC: 3 | RNVC: 2

26 May 2011

5340-33-209-4407
Thumb Latch

332094407
0738065300: RNCC: 3 | RNVC: 2

20 Dec 2011

5340-33-209-1309
Webbing Strap

332091309
0751001401: RNCC: 3 | RNVC: 2

20 Jun 2011

5340-33-208-3628
Mechanical Stop

332083628
212-46311-05-2: RNCC: 3 | RNVC: 2

23 Apr 2010

5340-33-207-2738
Bumper

332072738
1005.002755: RNCC: 3 | RNVC: 2
COH-00677: RNCC: 5 | RNVC: 2

16 Feb 2009

5340-33-207-4181
Manual Control Handle

332074181
WW 202 075 AU: RNCC: 3 | RNVC: 2

1 Apr 2009

5340-33-209-9505
Lock-Release Lever

332099505
35-46300-2801: RNCC: 3 | RNVC: 2

9 Apr 2012

5340-33-001-8812
Pieza Fijacion

330018812
325.9.712: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-116-8042
Manual Control Handle

331168042
00.00117/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-209-1523
Angle Bracket

332091523
D0932511175: RNCC: 3 | RNVC: 2

1 Jul 2011

5340-33-201-3988
Double Angle Bracket

332013988
A2811823-401: RNCC: 3 | RNVC: 2

5 Jul 2002

5340-33-209-5939
Mending Plate

332095939
0738179500: RNCC: 3 | RNVC: 2

19 Jan 2012

5340-33-205-4647
Dust And Moisture Seal Protective Plug

332054647
XX-426006000200: RNCC: 3 | RNVC: 2
426006000200: RNCC: 5 | RNVC: 2

23 Oct 2006

5340-33-209-8472
Access Cover

332098472
0738012430: RNCC: 3 | RNVC: 2

15 Mar 2012

5340-33-201-3979
Double Angle Bracket

332013979
A2810565-401: RNCC: 3 | RNVC: 2

5 Jul 2002

5340-33-189-1942
Instrument Mounting Clamp

331891942
02260053: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-187-2690
Nonmetallic Solid Wheel

331872690
168/130/FG: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-106-5390
Casement Fastener

331065390
A0302040: RNCC: 3 | RNVC: 2
PCAMI/RP/27A0302040: RNCC: 4 | RNVC: 1
010318: RNCC: 5 | RNVC: 2

8 Apr 1998

5340-33-209-6255
Double Angle Bracket

332096255
0750034601: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-33-207-7425
Line Supporting Strap

332077425
21122: RNCC: 3 | RNVC: 2

28 Sep 2009

5340-33-156-4529
Clip Retainer Plate

331564529
-80590-C8200: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-2429
Double Angle Bracket

332012429
113-0991-03: RNCC: 3 | RNVC: 2

11 Jun 2002

5340-33-207-6945
Mounting Plate

332076945
1.141.72.030: RNCC: 3 | RNVC: 2
5042958: RNCC: 3 | RNVC: 2

13 Aug 2009

5340-33-207-8428
Snap Hook

332078428
21321301: RNCC: 3 | RNVC: 2
DIN 5299 E 70 A4: RNCC: 5 | RNVC: 2

29 Oct 2009

5340-33-208-6380
Mounting Bracket

332086380
R0113375: RNCC: 3 | RNVC: 2

12 Nov 2010

5340-33-158-1512
Dust And Moisture Seal Boot

331581512
625044: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-33-200-0473
Manual Control Handle

332000473
240364: RNCC: 3 | RNVC: 2

28 Sep 2001

5340-33-208-8723
Mounting Plate

332088723
INS003134990050000: RNCC: 3 | RNVC: 2

5 Apr 2011

5340-33-206-5368
Bumper

332065368
10-47215-0001A1: RNCC: 3 | RNVC: 2

21 Feb 2008

5340-33-126-3427
Helical Compression Spring Seat

331263427
6.0690.20.3.0144: RNCC: 3 | RNVC: 2

4 Nov 1992

5340-33-001-2567
Double Angle Bracket

330012567
CA82900-0101: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-003-2416
Sealing Plug Assembly

330032416
SG13419: RNCC: 3 | RNVC: 2

4 Feb 1997

5340-33-201-9625
Manual Control Lever

332019625
27410025: RNCC: 3 | RNVC: 2

29 Nov 2002

5340-33-203-9341
Double Angle Bracket

332039341
PS-401078: RNCC: 3 | RNVC: 2

24 Jan 2005

5340-33-103-0709
Helical Compression Spring Seat

331030709
1005-001306: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-3126
Encendedor De Vehic

331563126
-25331-Y9501: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-7536
Mounting Bracket

332067536
98163359: RNCC: 3 | RNVC: 2

29 May 2008

5340-33-180-6925
Reten De Empaquetad

331806925
241598: RNCC: 3 | RNVC: 2
241598: RNCC: 6 | RNVC: 9

20 Jul 1995

5340-33-207-8421
Case Leg

332078421
GMV-HOC-BE-CDP-02: RNCC: 3 | RNVC: 2

29 Oct 2009

5340-33-206-7710
Pad Eye

332067710
PS-902997: RNCC: 3 | RNVC: 2

13 Jun 2008

5340-33-211-0836
Helical Compression Spring Seat

332110836
CE200752-0301: RNCC: 3 | RNVC: 2

6 Jun 2013

5340-33-102-1615
Dust And Moisture Seal Protective Plug

331021615
MC51-6-14: RNCC: 3 | RNVC: 2
MC51-6-14: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-003-3996
Headless Straight Rod

330033996
11.20010-0068-BZ: RNCC: 3 | RNVC: 2
11.20010-0068: RNCC: 5 | RNVC: 2
11.20010-0068: RNCC: 5 | RNVC: 2

27 Aug 1997

5340-33-208-5645
Mounting Bracket

332085645
RM-20100: RNCC: 3 | RNVC: 2

29 Sep 2010

5340-33-207-5610
Dust And Moisture Seal Protective Cap

332075610
H-66004: RNCC: 3 | RNVC: 2
33-R11-8702: RNCC: 6 | RNVC: 9

24 Jun 2009

5340-33-106-8196
Multiple Angle Bracket

331068196
2990000517: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-204-3763
Double Angle Bracket

332043763
NN60833P01: RNCC: 3 | RNVC: 2

18 Aug 2005

5340-33-210-6019
Access Cover

332106019
TP201099: RNCC: 3 | RNVC: 2

27 Nov 2012

5340-33-106-7092
Manual Control Handle

331067092
756624: RNCC: 3 | RNVC: 2

29 Jan 1999

5340-33-003-4297
Headless Straight Rod

330034297
159-390: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-106-1811
Double Angle Bracket

331061811
N1010201: RNCC: 3 | RNVC: 2

18 Jun 1997

5340-33-107-2472
Electronic Equipment Hardware Kit

331072472
16334086: RNCC: 3 | RNVC: 2

24 Sep 1999

5340-33-210-1706
Mounting Plate

332101706
R0096967: RNCC: 3 | RNVC: 2
R0096967-0113-002: RNCC: 5 | RNVC: 2

13 Jun 2012

5340-33-107-3979
Double Angle Bracket

331073979
RE-25-4-3-2: RNCC: 3 | RNVC: 2
RE-50-4-1-2: RNCC: 5 | RNVC: 2

15 Oct 1999

5340-33-207-6927
Access Hole Frame

332076927
5042950: RNCC: 3 | RNVC: 2
1.141.72.003: RNCC: 5 | RNVC: 2

11 Aug 2009

5340-33-211-3511
Dust And Moisture Seal Protective Plug

332113511
212-41109-01-1: RNCC: 3 | RNVC: 2

30 Sep 2013

5340-33-208-5494
Dust And Moisture Seal Protective Cap-Plug Set

332085494
RM-25400: RNCC: 3 | RNVC: 2

23 Sep 2010

5340-33-204-3469
Spring Tension Clip

332043469
PS-710032: RNCC: 3 | RNVC: 2

19 Jul 2005

5340-33-207-0602
Mounting Bracket

332070602
TP200594: RNCC: 3 | RNVC: 2

29 Oct 2008

5340-33-116-1837
Helical Compression Spring Retainer

331161837
3 104 696: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-209-6235
Mounting Plate

332096235
0750030921: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-33-208-0733
Mounting Bracket

332080733
PN09-0017-M028: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-33-208-0298
Elastic Strap

332080298
5305 20: RNCC: 3 | RNVC: 2
5340001563: RNCC: 5 | RNVC: 2

22 Jan 2010

5340-33-207-9468
Double Angle Bracket

332079468
J57166502-006: RNCC: 3 | RNVC: 2

9 Dec 2009

5340-33-208-7112
Webbing Strap

332087112
235-WH3-50+232-50 1700/500: RNCC: 3 | RNVC: 2

10 Jan 2011

5340-33-108-5349
No Metalico Tope

331085349
9644.250.0863: RNCC: 3 | RNVC: 2
2510008545: RNCC: 5 | RNVC: 2
2510008545: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-001-9950
Double Angle Bracket

330019950
35-63639-0003: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-126-5554
Spring Tension Clip

331265554
C22334-A1000-C112: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-116-8159
Dust And Moisture Seal Protective Cap-Plug

331168159
543.7.114: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-1463
Mechanical Stop

332071463
105131: RNCC: 3 | RNVC: 2

2 Dec 2008

5340-33-206-5397
Case Corner

332065397
K-004/N: RNCC: 3 | RNVC: 2

25 Feb 2008

5340-33-107-4182
Spring Tension Clip

331074182
7053.252.0087: RNCC: 3 | RNVC: 2
2510700595: RNCC: 5 | RNVC: 2

15 Oct 1999

5340-33-200-3325
Dust And Moisture Seal Protective Cap

332003325
730011946: RNCC: 3 | RNVC: 2

10 Jan 2002

5340-33-202-1390
Headless Straight Rod

332021390
35-22088-0002: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-33-208-8108
Mounting Bracket

332088108
4111-101: RNCC: 3 | RNVC: 2

4 Mar 2011

5340-33-107-9388
No Metalico Tope

331079388
SE141156137A: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-33-204-6685
Conjunto Soporte Re

332046685
5037122: RNCC: 3 | RNVC: 2

28 Nov 2005

5340-33-000-0485
Double Angle Bracket

330000485
H350GS/D021/25: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-205-0739
Spring Tension Clip

332050739
59315-36E00: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-33-207-2865
Loop Clamp

332072865
J28665270-401: RNCC: 3 | RNVC: 2

19 Feb 2009

5340-33-004-7683
Flush Lock

330047683
-01605145-1: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-33-004-7136
Window Regulator Handle

330047136
-01605015-1: RNCC: 3 | RNVC: 2

10 Sep 1999

5340-33-204-5413
Butt Hinge Leaf

332045413
703531010: RNCC: 3 | RNVC: 2

10 Oct 2005

5340-33-004-4063
Spring Tension Clip

330044063
43900300: RNCC: 3 | RNVC: 2

22 Mar 1999

5340-33-207-7317
Mounting Plate

332077317
5042963: RNCC: 3 | RNVC: 2
1.141.33.030: RNCC: 5 | RNVC: 2

22 Sep 2009

5340-33-210-1712
Mounting Bracket

332101712
TOM0201117: RNCC: 3 | RNVC: 2

15 Jun 2012

5340-33-116-8635
Dust And Moisture Seal Protective Cap

331168635
2106/6: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-204-3884
Dust And Moisture Seal Protective Cover

332043884
PS-910673: RNCC: 3 | RNVC: 2

31 Aug 2005

5340-33-001-1898
Instrument Mounting Clamp

330011898
35-65116-0501: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-207-2616
Clamp Bolt Assembly

332072616
35-72675-0003: RNCC: 3 | RNVC: 2

10 Feb 2009

5340-33-208-5005
Blank Panel

332085005
CF 209 099 - U: RNCC: 3 | RNVC: 2

28 Jul 2010

5340-33-001-8287
Dust And Moisture Seal Protective Plug

330018287
6N-0-0-1: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-000-2031
Dust And Moisture Seal Protective Plug

330002031
010136: RNCC: 1 | RNVC: 2

11 Dec 1986

5340-33-116-8497
Multiple Angle Bracket

331168497
5156/5: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-181-5904
Dust And Moisture Seal Protective Cap

331815904
-01201906-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-103-0393
Hand Crank

331030393
C-2-32: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-0482
Double Angle Bracket

330000482
H350GS/D02/21: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-103-1727
Metallic Solid Wheel

331031727
1005-004330: RNCC: 3 | RNVC: 2
1907: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-115-5748
Tornillo Tuerca Y D

331155748
DIN 933-934-125-M10: RNCC: 3 | RNVC: 2

13 Sep 1995

5340-33-004-6447
Spring Tension Clip

330046447
60178001: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-207-9914
Angle Bracket

332079914
42.90.16.0300.0: RNCC: 3 | RNVC: 2

22 Dec 2009

5340-33-116-8409
Union Piso Barquill

331168409
598/8: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-202-7656
Butt Hinge Leaf

332027656
DF 400 379 AR: RNCC: 3 | RNVC: 2

20 Oct 2003

5340-33-207-0149
Mounting Plate

332070149
INS003024010020200: RNCC: 3 | RNVC: 2

10 Oct 2008

5340-33-003-1390
Dust And Moisture Seal Protective Cap

330031390
IHV-32-250-35: RNCC: 3 | RNVC: 2

30 Nov 1995

5340-33-205-5801
Dust And Moisture Seal Protective Plug

332055801
FC-16MAS: RNCC: 3 | RNVC: 2

21 Dec 2006

5340-33-210-5911
Clamp Bolt Assembly

332105911
35-82847-0001A01: RNCC: 3 | RNVC: 2

26 Nov 2012

5340-33-107-0622
Casement Fastener

331070622
9039923: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-004-2722
Spacing Threaded Standoff

330042722
730030206: RNCC: 3 | RNVC: 2

25 Nov 1998

5340-33-201-8362
Utility Resilient Mount

332018362
V-164: RNCC: 3 | RNVC: 2

29 Oct 2002

5340-33-207-5243
Mounting Bracket

332075243
35-61428-0001: RNCC: 3 | RNVC: 2

1 Jun 2009

5340-33-204-8944
No Metalico Tope

332048944
51553-29F00: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-203-9339
Double Angle Bracket

332039339
PS-401076: RNCC: 3 | RNVC: 2

24 Jan 2005

5340-33-103-1426
Double Angle Bracket

331031426
1005-004422: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-33-107-3004
Spacing Threaded Standoff

331073004
21124061000: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-160-2146
Presilla Abrazadera

5340-33-201-3148
Seal Retaining Plate

332013148
707-40-90080: RNCC: 3 | RNVC: 2

21 Jun 2002

5340-33-208-8095
Mounting Bracket

332088095
4093-101: RNCC: 3 | RNVC: 2

4 Mar 2011

5340-33-210-2149
Block Clamp

332102149
M282A3212200: RNCC: 3 | RNVC: 2

28 Jun 2012

5340-33-116-8410
Conjunto Reaccion

331168410
2106/33: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-3997
Helical Compression Spring Seat

330033997
11.20072-0087: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-161-0771
Proteccion Manguito

5340-33-161-0772
Proteccion Manguito

5340-33-160-2794
Muelle Helico Reten

5340-33-160-3868
Spring Tension Clip

331603868
5.508.041: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-3012
Double Angle Bracket

331083012
RE-50-4-1-4: RNCC: 3 | RNVC: 2

13 Feb 2001

5340-33-206-9004
Dust And Moisture Seal Protective Cap-Plug

332069004
1.120.26.03.005: RNCC: 3 | RNVC: 2
01405/11: RNCC: 5 | RNVC: 2

11 Sep 2008

5340-33-190-5567
Sealing Plug Assembly

331905567
K43164071-001: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-207-2055
Caster Wheel

332072055
26.20.012: RNCC: 3 | RNVC: 2
9999-33-R27-2505: RNCC: 6 | RNVC: 9

15 Jan 2009

5340-33-210-5780
Mechanical Stop

332105780
35-61645-0001: RNCC: 3 | RNVC: 2

23 Nov 2012

5340-33-207-6431
Mounting Plate

332076431
R0096106: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-106-7931
Helical Compression Spring Seat

331067931
RAL-200-2-7-8: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-33-208-7731
Runner

332087731
35-94244-0005: RNCC: 3 | RNVC: 2
35-94244-0003: RNCC: 3 | RNVC: 9

18 Feb 2011

5340-33-202-4882
Anillo Porta Fusibl

332024882
2.135.101-A: RNCC: 3 | RNVC: 2
5029133: RNCC: 5 | RNVC: 2

11 Jul 2003

5340-33-181-2904
Escutcheon Plate

331812904
-01601339-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-116-8268
Double Angle Bracket

331168268
22 538 A: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-2111
No Metalico Tope

330022111
920.184.14: RNCC: 3 | RNVC: 2

23 Aug 1993

5340-33-210-1821
Rigid Caster

332101821
310-100: RNCC: 3 | RNVC: 2
82545012: RNCC: 5 | RNVC: 2

15 Jun 2012

5340-33-206-8679
Mounting Bracket

332068679
MTOO13-CE500080-00/4-B: RNCC: 3 | RNVC: 2

30 Jul 2008

5340-33-207-7223
Mending Plate

332077223
5049180: RNCC: 3 | RNVC: 2

16 Sep 2009

5340-33-207-0451
Angle Bracket

332070451
448171: RNCC: 3 | RNVC: 2

22 Oct 2008

5340-33-209-4685
Mechanical Stop

332094685
0664.20.1007.08: RNCC: 3 | RNVC: 2

27 Dec 2011

5340-33-102-3849
Manual Control Lever

331023849
42120000220: RNCC: 3 | RNVC: 2
MB57-1-22: RNCC: 3 | RNVC: 2
42120000220: RNCC: 3 | RNVC: 2
MB57-1-22: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-158-5581
Dust And Moisture Seal Protective Cap

331585581
-03500266-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-6740
Friction Catch

332066740
CAN51031-1: RNCC: 3 | RNVC: 2

18 Apr 2008

5340-33-205-3972
Double Angle Bracket

332053972
5034891: RNCC: 3 | RNVC: 2
3.033.60.901-A: RNCC: 5 | RNVC: 2

13 Sep 2006

5340-33-160-3896
No Metalico Tope

331603896
79.10.030.766: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-7314
Mechanical Stop

332077314
5042918: RNCC: 3 | RNVC: 2
2.196.008: RNCC: 5 | RNVC: 2

22 Sep 2009

5340-33-204-7568
Metalico Tope

332047568
MAM-HE-40-00-05: RNCC: 3 | RNVC: 2

10 Jan 2006

5340-33-208-7111
Webbing Strap

332087111
235-WH3-50+232-50 1500/350: RNCC: 3 | RNVC: 2

10 Jan 2011

5340-33-207-0125
Mounting Bracket

332070125
980744: RNCC: 3 | RNVC: 2

10 Oct 2008

5340-33-156-3334
Clip Retainer Plate

331563334
-90590-01C00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-210-0617
Webbing Strap

332100617
5701-25+5768-25 1200/600: RNCC: 3 | RNVC: 2

18 May 2012

5340-33-200-0119
Multiple Angle Bracket

332000119
NN60426P01: RNCC: 3 | RNVC: 2

24 Sep 2001

5340-33-161-1349
Flush Lock

331611349
00.561.950.00: RNCC: 3 | RNVC: 2

21 Sep 1995

5340-33-200-3404
Utility Resilient Mount

332003404
92990850112: RNCC: 3 | RNVC: 2

11 Jan 2002

5340-33-204-8563
Manual Control Handle

332048563
EP.63640-RFV-1: RNCC: 3 | RNVC: 2

15 Feb 2006

5340-33-209-6254
Multiple Angle Bracket

332096254
0750036711: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-33-206-8453
Angle Bracket

332068453
PCMSABMR134: RNCC: 3 | RNVC: 2

17 Jul 2008

5340-33-161-6249
Helical Compression Spring Seat

331616249
J-464: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-33-208-3240
Access Cover

332083240
C0AC32TN000F: RNCC: 3 | RNVC: 2
BAC0AC32TN000FSE: RNCC: 5 | RNVC: 2
BT-HM 32D2F-1510.1: RNCC: 5 | RNVC: 2

9 Apr 2010

5340-33-126-9207
Dust And Moisture Seal Protective Cap-Plug

331269207
20207067-9: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-6400
Nut And Bolt Locking Plate

332066400
015.507.213.121: RNCC: 3 | RNVC: 2
H 55067: RNCC: 5 | RNVC: 2
2990-33-R11-8686: RNCC: 6 | RNVC: 9

4 Apr 2008

5340-33-160-2818
Sujecion Brida

5340-33-206-2498
Helical Compression Spring Seat

332062498
XX-421200003400: RNCC: 3 | RNVC: 2
421200003400: RNCC: 5 | RNVC: 2

15 Oct 2007

5340-33-102-4009
Dust And Moisture Seal Protective Plug

331024009
VB-100-A-0800: RNCC: 3 | RNVC: 2
42120010080: RNCC: 3 | RNVC: 2
VB-100-A-0800: RNCC: 3 | RNVC: 2
42120010080: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-210-5306
Multiple Angle Bracket

332105306
230368: RNCC: 3 | RNVC: 2

26 Oct 2012

5340-33-204-7969
Proteccion Panel

332047969
5037134: RNCC: 3 | RNVC: 2
1.124.92.050: RNCC: 5 | RNVC: 2

25 Jan 2006

5340-33-103-2428
Helical Compression Spring Retainer

331032428
1055-000342: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-9922
Runner

332079922
44.45.00.0007.0: RNCC: 3 | RNVC: 2

22 Dec 2009

5340-33-211-2604
Multiple Angle Bracket

332112604
TP252266: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-33-206-9295
Mounting Bracket

332069295
CMA128-3: RNCC: 3 | RNVC: 2

19 Sep 2008

5340-33-107-8378
Spring Tension Clip

331078378
631 984 10 61: RNCC: 3 | RNVC: 2

26 Jun 2000

5340-33-187-2695
Nonmetallic Solid Wheel

331872695
328/260: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-203-7574
Escutcheon Plate

332037574
PRI610000085: RNCC: 3 | RNVC: 2
PCAMI/RP/08PRI610000085: RNCC: 5 | RNVC: 1

18 Sep 2004

5340-33-106-8041
Metallic Solid Wheel

331068041
M.010-00.100: RNCC: 3 | RNVC: 2
PCAMI/RP/1201000100: RNCC: 5 | RNVC: 2

31 Mar 1999

5340-33-207-5758
Lock Bolt

332075758
CF 819 723 A: RNCC: 3 | RNVC: 2

29 Jun 2009

5340-33-126-3191
Double Angle Bracket

331263191
6.302.0.637.009.5: RNCC: 3 | RNVC: 2

3 Dec 1992

5340-33-208-4831
Mounting Plate

332084831
INS003112060050000: RNCC: 3 | RNVC: 2

16 Jul 2010

5340-33-207-1611
Mounting Bracket

332071611
10-46235-0001: RNCC: 3 | RNVC: 2
D0932511232: RNCC: 5 | RNVC: 2

10 Dec 2008

5340-33-180-7301
P Placa De Montaje

331807301
279970: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-209-5030
Mounting Plate

332095030
0738050460: RNCC: 3 | RNVC: 2

13 Jan 2012

5340-33-106-4515
Manual Control Handle

331064515
-07701137-0: RNCC: 3 | RNVC: 2

9 Feb 1998

5340-33-202-7313
Butt Hinge Leaf

332027313
DF 304 458 A: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-33-203-6755
Hand Crank

332036755
CLT-0359-10: RNCC: 3 | RNVC: 2

29 Jul 2004

5340-33-208-0647
Mending Plate

332080647
0751011181: RNCC: 3 | RNVC: 2

8 Feb 2010

5340-33-105-8996
Helical Compression Spring Seat

331058996
CMH95200-3/1/1-8: RNCC: 3 | RNVC: 2

10 Jul 1996

5340-33-206-9861
Angle Bracket

332069861
TP250300: RNCC: 3 | RNVC: 2

3 Oct 2008

5340-33-200-4678
No Met Parachoques

332004678
35-65116-1001: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-33-207-3324
Manual Control Lever

332073324
35-25152-0003: RNCC: 3 | RNVC: 2

5 Mar 2009

5340-33-209-9936
Manual Control Lever

332099936
95-25151-0001: RNCC: 3 | RNVC: 2

19 Apr 2012

5340-33-209-4183
Mounting Bracket

332094183
0738089100: RNCC: 3 | RNVC: 2

7 Dec 2011

5340-33-209-4172
Mounting Plate

332094172
0738000960: RNCC: 3 | RNVC: 2

7 Dec 2011

5340-33-190-2563
Spring Tension Clip

331902563
44321: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-106-9523
Manual Control Lever

331069523
168-4 + 149-50: RNCC: 3 | RNVC: 2
PCAMI/RP/0700000510/N: RNCC: 5 | RNVC: 2
PCAMI/RP/0700000510: RNCC: 6 | RNVC: 9

18 May 1999

5340-33-107-0325
Casement Fastener

331070325
9038923: RNCC: 3 | RNVC: 2

25 May 1999

5340-33-201-4517
Double Angle Bracket

332014517
RAL-200-4-6-4: RNCC: 3 | RNVC: 2

22 Jul 2002

5340-33-181-2911
Spring Tension Clip

331812911
SS-06-0267G: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-209-1661
Mounting Bracket

332091661
0750027100: RNCC: 3 | RNVC: 2

6 Jul 2011

5340-33-208-3244
Access Cover

332083244
C0AC38TN000F: RNCC: 3 | RNVC: 2
BT-HM 38D2F-1510.1: RNCC: 5 | RNVC: 2
BAC0AC38TN000FSE: RNCC: 5 | RNVC: 2

9 Apr 2010

5340-33-209-2205
Mounting Bracket

332092205
1025900117: RNCC: 3 | RNVC: 2
9682.101.0710: RNCC: 5 | RNVC: 2

28 Jul 2011

5340-33-125-9853
Nonmetallic Solid Wheel

331259853
V30087-A134-R42: RNCC: 3 | RNVC: 2

13 Sep 1995

5340-33-003-5125
Mechanic Equipment Hardware Kit

330035125
221407016: RNCC: 3 | RNVC: 2
EN221407-16: RNCC: 5 | RNVC: 9

14 Nov 1997

5340-33-002-1803
Semiabrazadera Izqu

330021803
620810-1: RNCC: 3 | RNVC: 2
4210-000052: RNCC: 5 | RNVC: 2

13 Jul 1993

5340-33-103-9460
Bola De Mando

331039460
5355-000004: RNCC: 3 | RNVC: 2
5355000004: RNCC: 5 | RNVC: 2

3 Jan 1995

5340-33-208-1015
Block Clamp

332081015
PT76-106-001-01: RNCC: 3 | RNVC: 2

23 Feb 2010

5340-33-204-9984
Dust And Moisture Seal Boot

332049984
59386-13A00: RNCC: 3 | RNVC: 2

30 Mar 2006

5340-33-201-8191
Manual Control Lever

332018191
2510901015: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-208-6481
Mounting Bracket

332086481
EMB3-101-402-00: RNCC: 3 | RNVC: 2

22 Nov 2010

5340-33-102-1672
Dust And Moisture Seal Protective Cap

331021672
MBCE-4-56: RNCC: 3 | RNVC: 2
MBCE-4-56: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-201-8048
Multiple Angle Bracket

332018048
320517: RNCC: 3 | RNVC: 2

25 Oct 2002

Load More Results