What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 33 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 33 of 39

5340-33-205-0721
Dirt And Liquid Deflector

332050721
19642000: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-33-116-5281
Dust And Moisture Seal Protective Cap

331165281
4002915: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-105-1041
Double Angle Bracket

331051041
32320010040: RNCC: 3 | RNVC: 2
32320010040: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-001-3627
Spring Holder

330013627
92018309: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-126-3438
Spring Tension Clip

331263438
6.0690.87.3.0104: RNCC: 3 | RNVC: 2

4 Nov 1992

5340-33-116-8158
Dust And Moisture Seal Protective Cap-Plug

331168158
15 D-99: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-3910
No Metalico Tope

331603910
95.499.068: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-7502
Scissors Arms

332077502
5042123: RNCC: 3 | RNVC: 2
1.150.71.001: RNCC: 5 | RNVC: 2

30 Sep 2009

5340-33-145-6014
Conos

331456014
71300032-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-6426
Multiple Angle Bracket

332076426
R0094975: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-206-0422
Double Angle Bracket

332060422
NN60970P01: RNCC: 3 | RNVC: 2

10 Jul 2007

5340-33-002-9763
Dust And Moisture Seal Protective Cap-Plug

330029763
6319970330: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-207-4608
Nonmetallic Solid Wheel

332074608
112-PE-PI-466: RNCC: 3 | RNVC: 2

17 Apr 2009

5340-33-103-0976
Manual Control Lever

331030976
2510-002178: RNCC: 3 | RNVC: 2
411.090.0070: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-000-0777
Spring Holder

330000777
2025300: RNCC: 1 | RNVC: 2
18245: RNCC: 3 | RNVC: 2

10 Jul 1986

5340-33-004-7092
Double Angle Bracket

330047092
NN60123P01: RNCC: 3 | RNVC: 2

10 Sep 1999

5340-33-202-4825
Casquillo Central

332024825
2.135.030: RNCC: 3 | RNVC: 2
5027199: RNCC: 5 | RNVC: 2

9 Jul 2003

5340-33-209-6311
Dust And Moisture Seal Protective Cap

332096311
0750030421: RNCC: 3 | RNVC: 2

24 Jan 2012

5340-33-108-6601
No Metalico Tope

331086601
992.100.094: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-33-208-7512
Mounting Plate

332087512
R0110792: RNCC: 3 | RNVC: 2

2 Feb 2011

5340-33-106-4270
Window Regulator Handle

331064270
508797: RNCC: 3 | RNVC: 2
758040: RNCC: 3 | RNVC: 2
15100267: RNCC: 5 | RNVC: 9

5 Jan 1998

5340-33-206-8544
Rod End Connector

332068544
1.120.12.04.005: RNCC: 3 | RNVC: 2

21 Jul 2008

5340-33-154-7235
Manual Control Handle

331547235
556882: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-204-1858
Cantonera O Abrazad

332041858
021.01.021: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-33-208-4003
Bumper

332084003
111023: RNCC: 3 | RNVC: 2
0042939: RNCC: 5 | RNVC: 2

13 May 2010

5340-33-209-3410
Extension Handle

332093410
A70691: RNCC: 3 | RNVC: 2

4 Nov 2011

5340-33-208-3574
Mounting Bracket

332083574
2510901164: RNCC: 3 | RNVC: 2
9644.251.9680: RNCC: 5 | RNVC: 2

22 Apr 2010

5340-33-201-0480
Helical Compression Spring Seat

332010480
5930000374: RNCC: 3 | RNVC: 2
5930000374: RNCC: 5 | RNVC: 2

24 Apr 2002

5340-33-200-0950
Manual Control Lever

332000950
50.41.027.A: RNCC: 3 | RNVC: 2

5 Oct 2001

5340-33-204-6684
Utility Access Door

332046684
5037121: RNCC: 3 | RNVC: 2

28 Nov 2005

5340-33-102-4006
Dust And Moisture Seal Protective Cap

331024006
42620001061: RNCC: 3 | RNVC: 2
MBL-5-1110: RNCC: 3 | RNVC: 2
42620001061: RNCC: 3 | RNVC: 2
MBL-5-1110: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-6513
Manual Control Handle

331166513
312.001.000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-0033
Housing

330020033
35-46210-2201-01: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-115-9905
Helical Compression Spring Seat

331159905
101.221.10.00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-9893
Dust And Moisture Seal Protective Cap

332019893
1025-900848: RNCC: 3 | RNVC: 2

9 Dec 2002

5340-33-201-1127
Conjunto Soporte Tr

332011127
7562.252.1520: RNCC: 3 | RNVC: 2

10 May 2002

5340-33-208-0714
Mounting Bracket

332080714
610CM110006: RNCC: 3 | RNVC: 2

9 Feb 2010

5340-33-102-4007
Dust And Moisture Seal Protective Cap

331024007
MB51-5-11: RNCC: 3 | RNVC: 2
MB51-5-11: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-0661
Rod End Clevis

332070661
12-0201: RNCC: 3 | RNVC: 2
12-0201: RNCC: 6 | RNVC: 9

30 Oct 2008

5340-33-210-3820
Retaining Strap

332103820
114-72-31270: RNCC: 3 | RNVC: 2

26 Sep 2012

5340-33-106-8645
Dust And Moisture Seal Protective Plug

331068645
554465: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-206-0407
Multiple Angle Bracket

332060407
NN60956P01: RNCC: 3 | RNVC: 2

10 Jul 2007

5340-33-004-9689
Manual Control Handle

330049689
2600055: RNCC: 3 | RNVC: 2

26 Apr 2000

5340-33-204-8360
Double Angle Bracket

332048360
SC060810: RNCC: 3 | RNVC: 2

13 Feb 2006

5340-33-157-8012
Double Angle Bracket

331578012
691955: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-4843
Utility Resilient Mount

332004843
220010: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-33-204-6682
Utility Access Door

332046682
5037118: RNCC: 3 | RNVC: 2

28 Nov 2005

5340-33-211-2846
Double Angle Bracket

332112846
TP252544: RNCC: 3 | RNVC: 2

9 Aug 2013

5340-33-208-4126
Mounting Bracket

332084126
185154: RNCC: 3 | RNVC: 2

25 May 2010

5340-33-108-5186
Spring Tension Clip

331085186
8194877: RNCC: 3 | RNVC: 2

26 Mar 2001

5340-33-154-7237
Manual Control Handle

331547237
736935: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-209-3999
Mounting Bracket

332093999
0738012340: RNCC: 3 | RNVC: 2

1 Dec 2011

5340-33-004-5588
Seal Retaining Plate

330045588
NN51395P05: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-33-004-5263
Dust And Moisture Seal Protective Plug

330045263
025830: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-204-1134
Manual Control Handle

332041134
064-08.08: RNCC: 3 | RNVC: 2

30 Mar 2005

5340-33-003-1068
Window Regulator Handle

330031068
80760-C7101: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-004-5267
Dust And Moisture Seal Protective Plug

330045267
920331: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-114-4993
Helical Compression Spring Retainer

331144993
5TG 2-11: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-201-1265
Dust And Moisture Seal Protective Cover

332011265
MAM-U-21-02-01: RNCC: 3 | RNVC: 2

14 May 2002

5340-33-155-9309
Escutcheon Plate

331559309
313766: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-154-3822
Helical Compression Spring Seat

331543822
544476.95: RNCC: 3 | RNVC: 2
544476 95: RNCC: 5 | RNVC: 2
544476.61: RNCC: 5 | RNVC: 2

18 Jan 1991

5340-33-156-2335
Double Angle Bracket

331562335
-20655-Y9501: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-154-0291
Helical Compression Spring Seat

331540291
812260: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-204-5407
Spacing Threaded Standoff

332045407
703531005: RNCC: 3 | RNVC: 2

10 Oct 2005

5340-33-004-8755
Double Angle Bracket

330048755
NN60453G01: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-33-181-1136
Dust And Moisture Seal Protective Plug

331811136
-11021-37502: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-115-8733
Dust And Moisture Seal Protective Plug Set

331158733
41730: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-4400
Nut And Bolt Locking Plate

330004400
517216: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-156-3307
Asientos Bisagra

331563307
-88801-Y9501: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-208-3419
Line Supporting Strap

332083419
21114: RNCC: 3 | RNVC: 2

16 Apr 2010

5340-33-201-3981
Double Angle Bracket

332013981
A2811267-001: RNCC: 3 | RNVC: 2

5 Jul 2002

5340-33-002-2908
Dust And Moisture Seal Protective Cap

330022908
1055-000975: RNCC: 3 | RNVC: 2

14 Jun 1994

5340-33-155-9297
Helical Compression Spring Seat

331559297
582842: RNCC: 3 | RNVC: 2
4003623: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-155-7851
Double Angle Bracket

331557851
649069: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-180-6795
Dust And Moisture Seal Boot

331806795
219714: RNCC: 3 | RNVC: 2
219714: RNCC: 6 | RNVC: 9

25 Jul 1995

5340-33-161-1360
Flush Lock

331611360
00.561.951.00: RNCC: 3 | RNVC: 2

12 Sep 1995

5340-33-204-7512
Multiple Angle Bracket

332047512
5038121: RNCC: 3 | RNVC: 2
1.124.60.050.02-A: RNCC: 5 | RNVC: 2

5 Jan 2006

5340-33-004-7017
Multiple Angle Bracket

330047017
NN60426P02: RNCC: 3 | RNVC: 2

3 Sep 1999

5340-33-154-0280
Helical Compression Spring Seat

331540280
126429.95: RNCC: 3 | RNVC: 2
126429.61: RNCC: 5 | RNVC: 2

21 Dec 1989

5340-33-157-8534
Double Angle Bracket

331578534
781680: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-208-5599
Manual Control Lever

332085599
R0109737: RNCC: 3 | RNVC: 2

28 Sep 2010

5340-33-210-2558
Catch Strike

332102558
231142900: RNCC: 3 | RNVC: 2

9 Jul 2012

5340-33-106-5831
Nut And Bolt Retainer

331065831
RF 403 286A: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-33-209-8950
Protection Bellows

332098950
9390900050: RNCC: 3 | RNVC: 2
83533: RNCC: 5 | RNVC: 2

29 Mar 2012

5340-33-116-6585
Hand Crank

331166585
15 A-87: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-108-2226
Metallic Solid Wheel

331082226
9644.101.0230: RNCC: 3 | RNVC: 2
1005006354: RNCC: 5 | RNVC: 2
1005006354: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-106-9958
Manual Control Handle

331069958
9162.17: RNCC: 3 | RNVC: 2

25 May 1999

5340-33-208-1672
Mounting Plate

332081672
INS102000000011000: RNCC: 3 | RNVC: 2

12 Mar 2010

5340-33-203-1779
Clamping Catch Fastener

332031779
9673.250.5930: RNCC: 3 | RNVC: 2
2540900576: RNCC: 5 | RNVC: 2
2540900576: RNCC: 5 | RNVC: 2

11 Feb 2004

5340-33-102-9726
Dust And Moisture Seal Protective Cap

331029726
198578: RNCC: 3 | RNVC: 2

13 Nov 1992

5340-33-200-4567
Dust And Moisture Seal Protective Cover

332004567
WW 458 960: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-33-108-4628
Hand Crank

331084628
9644.250.2530: RNCC: 3 | RNVC: 2
5120000759: RNCC: 5 | RNVC: 2
5120000759: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-107-9683
Dust And Moisture Seal Protective Cap-Plug

331079683
193725: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-33-200-4949
Manual Control Lever

332004949
19511404: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-210-7061
Spacing Threaded Standoff

332107061
4259.4210.00.16: RNCC: 3 | RNVC: 2

21 Jan 2013

5340-33-181-1192
No Metalico Tope

331811192
-46271-G9700: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-207-9830
Angle Bracket

332079830
42.45.16.5200.0: RNCC: 3 | RNVC: 2

17 Dec 2009

5340-33-203-0272
Spacing Threaded Standoff

332030272
703720020: RNCC: 3 | RNVC: 2

15 Jan 2004

5340-33-161-4291
Nut And Bolt Locking Plate

331614291
901240: RNCC: 3 | RNVC: 2
901240: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-181-8184
Nut And Bolt Locking Plate

331818184
-0920645: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-004-2177
Spring Tension Clip

330042177
683167: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-156-2346
Double Angle Bracket

331562346
-95820-G9500: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-105-1804
Dust And Moisture Seal Protective Plug

331051804
SE128128012A: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-003-2487
Mechanic Equipment Hardware Kit

330032487
221022320: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-33-106-2176
Dust And Moisture Seal Boot

331062176
621286: RNCC: 3 | RNVC: 2

27 Oct 1997

5340-33-206-9174
Friction Catch Stud

332069174
201012600: RNCC: 3 | RNVC: 2
PFE20101260002: RNCC: 5 | RNVC: 2

16 Sep 2008

5340-33-004-7757
Dust And Moisture Seal Protective Plug

330047757
-07905044-0: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-33-126-3428
Helical Compression Spring Seat

331263428
101.221.03.00: RNCC: 3 | RNVC: 2

4 Nov 1992

5340-33-207-5600
Access Cover

332075600
CF 407 506: RNCC: 3 | RNVC: 2

24 Jun 2009

5340-33-160-0636
Dust And Moisture Seal Protective Cap

331600636
97.513.543.XX: RNCC: 3 | RNVC: 2

23 Nov 1995

5340-33-155-6617
Spring Holder

331556617
514244: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-155-8464
Nut And Bolt Locking Plate

331558464
8719940030: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-33-003-4296
Headless Straight Rod

330034296
159-389: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-005-3672
Multiple Angle Bracket

330053672
7053.252.0143: RNCC: 3 | RNVC: 2
2510700394: RNCC: 5 | RNVC: 2

16 Jul 2001

5340-33-106-4717
Metalico Tope

331064717
98459137: RNCC: 3 | RNVC: 2

6 Mar 1998

5340-33-160-3775
Dust And Moisture Seal Protective Cap

331603775
79.03.075.019: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-6925
Mounting Plate

332076925
5042949: RNCC: 3 | RNVC: 2
1.141.72.002: RNCC: 5 | RNVC: 2

11 Aug 2009

5340-33-158-5578
Dust And Moisture Seal Protective Cap

331585578
-01201969-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-7682
Flush Lock

330047682
-01605144-6: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-33-158-5626
Escutcheon Plate

331585626
-0161006-0: RNCC: 3 | RNVC: 2
-01606345-0: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-161-3481
Helical Compression Spring Retainer

331613481
575724: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-33-204-3882
Dust And Moisture Seal Protective Cover

332043882
29347-56B00: RNCC: 3 | RNVC: 2

31 Aug 2005

5340-33-200-6700
Sealing Plug Assembly

332006700
320020: RNCC: 3 | RNVC: 2

22 Feb 2002

5340-33-202-7852
Dust And Moisture Seal Protective Cap

332027852
1025-900528: RNCC: 3 | RNVC: 2

28 Oct 2003

5340-33-200-0822
Seal Retaining Plate

332000822
317919: RNCC: 3 | RNVC: 2

5 Oct 2001

5340-33-209-9436
Escutcheon Plate

332099436
32630-31: RNCC: 3 | RNVC: 2
2815-33-N00-2102: RNCC: 6 | RNVC: 9

3 Apr 2012

5340-33-107-7357
Double Angle Bracket

331077357
7562.252.0314: RNCC: 3 | RNVC: 2
2510700646: RNCC: 5 | RNVC: 2

20 Jun 2000

5340-33-208-1028
Retaining Strap

332081028
55410310: RNCC: 3 | RNVC: 2

23 Feb 2010

5340-33-210-4163
Key Holder

332104163
COD. 425: RNCC: 3 | RNVC: 2

1 Oct 2012

5340-33-004-6460
Dust And Moisture Seal Boot

330046460
32853-G9601: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-157-7946
Mending Plate

331577946
645436: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-1602
Manual Control Lever

332001602
PN70127P01: RNCC: 3 | RNVC: 2

25 Oct 2001

5340-33-208-6398
Mounting Plate

332086398
R0106418: RNCC: 3 | RNVC: 2

12 Nov 2010

5340-33-207-9594
Mounting Bracket

332079594
40.18.60.2030.0: RNCC: 3 | RNVC: 2

11 Dec 2009

5340-33-003-2892
Mechanic Equipment Hardware Kit

330032892
221023930: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-160-0622
Helical Compression Spring Retainer

331600622
0827.16: RNCC: 3 | RNVC: 2

23 Nov 1995

5340-33-180-7554
Double Angle Bracket

331807554
502205: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-209-3188
Utility Resilient Mount

332093188
137103: RNCC: 3 | RNVC: 2
1208055: RNCC: 5 | RNVC: 2

30 Sep 2011

5340-33-108-1663
Multiple Angle Bracket

331081663
00.25: RNCC: 3 | RNVC: 2

19 Jan 2001

5340-33-202-8741
Seal Retaining Plate

332028741
VR15020200: RNCC: 3 | RNVC: 2

17 Nov 2003

5340-33-155-7868
Double Angle Bracket

331557868
809730: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-155-7834
Double Angle Bracket

331557834
690428: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-207-4143
Safety Cable Kit

332074143
30941180: RNCC: 3 | RNVC: 2

1 Apr 2009

5340-33-160-6166
Manual Control Handle

331606166
75.529.838: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-6136
Double Angle Bracket

332016136
320600: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-33-203-1186
Utility Resilient Mount

332031186
136047: RNCC: 3 | RNVC: 2

2 Feb 2004

5340-33-106-4954
Headless Straight Rod

331064954
-90506-G9800: RNCC: 3 | RNVC: 2

9 Mar 1998

5340-33-160-6796
Dust And Moisture Seal Boot

331606796
95.537.816: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-3001
Spacing Threaded Standoff

332013001
4933000099: RNCC: 3 | RNVC: 2

20 Jun 2002

5340-33-211-2853
Multiple Angle Bracket

332112853
TP252600: RNCC: 3 | RNVC: 2

9 Aug 2013

5340-33-004-8202
Double Angle Bracket

330048202
NN60069P01: RNCC: 3 | RNVC: 2

22 Nov 1999

5340-33-160-6363
Clip Retainer Plate

331606363
95.563.020: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-3405
Utility Resilient Mount

332003405
92990856400: RNCC: 3 | RNVC: 2

11 Jan 2002

5340-33-004-5264
Dust And Moisture Seal Protective Plug

330045264
065111: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-209-6229
Mounting Plate

332096229
0750030431: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-33-160-6426
Seal Retaining Plate

331606426
95.617.749: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-8966
Double Angle Bracket

331558966
312191: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-210-0611
Webbing Strap

332100611
ABS-2 01155 1300/600: RNCC: 3 | RNVC: 2

18 May 2012

5340-33-207-9598
Access Cover

332079598
10-21039-0201: RNCC: 3 | RNVC: 2

11 Dec 2009

5340-33-205-2438
B Tubular Soporte

332052438
CBD56501G13: RNCC: 3 | RNVC: 2

30 Jun 2006

5340-33-108-2503
Spacing Threaded Standoff

331082503
9644.250.2430: RNCC: 3 | RNVC: 2
2510009073: RNCC: 5 | RNVC: 2
2510009073: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-190-3136
Manual Control Handle

331903136
OH7428: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-211-2873
Double Angle Bracket

332112873
TP252628: RNCC: 3 | RNVC: 2

9 Aug 2013

5340-33-000-4442
Nut And Bolt Locking Plate

330004442
813588: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-108-2139
Metallic Solid Wheel

331082139
9644.100.0009: RNCC: 3 | RNVC: 2
1005005226: RNCC: 5 | RNVC: 2
1005005226: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-106-8183
Multiple Angle Bracket

331068183
317862: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-003-2905
Mechanic Equipment Hardware Kit

330032905
221024525: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-201-4833
Perfil Ext. Interme

332014833
901.84.02: RNCC: 3 | RNVC: 2

7 Aug 2002

5340-33-210-6575
Mounting Plate

332106575
101090927100: RNCC: 3 | RNVC: 2
101090927110/1.1: RNCC: 3 | RNVC: 2

17 Dec 2012

5340-33-187-2691
Nonmetallic Solid Wheel

331872691
160/50: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-208-7528
Mounting Plate

332087528
R0110304: RNCC: 3 | RNVC: 2

2 Feb 2011

5340-33-207-6441
Mounting Plate

332076441
R0095717: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-207-6685
Mounting Bracket

332076685
R0097268: RNCC: 3 | RNVC: 2

28 Jul 2009

5340-33-203-2905
Dust And Moisture Seal Protective Cap-Plug

332032905
56797-80X50: RNCC: 3 | RNVC: 2

24 Feb 2004

5340-33-209-0871
Cable Tie Anchor

332090871
21165: RNCC: 3 | RNVC: 2

6 Jun 2011

5340-33-209-9293
Access Cover

332099293
0861103620: RNCC: 3 | RNVC: 2

3 Apr 2012

5340-33-207-6006
Filler Opening Cap

332076006
DF 410 054 AR: RNCC: 3 | RNVC: 2

9 Jul 2009

5340-33-207-7289
Rod End Clevis

332077289
5040870: RNCC: 3 | RNVC: 2
1.141.31.002: RNCC: 5 | RNVC: 2

22 Sep 2009

5340-33-207-6529
Access Cover

332076529
R0095921: RNCC: 3 | RNVC: 2

21 Jul 2009

5340-33-161-3836
Soporte-Conjunto

331613836
630831: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-000-7814
Dust And Moisture Seal Protective Plug

330007814
426200010600000: RNCC: 3 | RNVC: 2

2 Dec 1988

5340-33-002-2697
Headless Straight Rod

330022697
R.0602.00S: RNCC: 3 | RNVC: 2

7 Jun 1994

5340-33-003-7154
Dust And Moisture Seal Protective Plug

330037154
5340000196: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-33-204-9443
Double Angle Bracket

332049443
0226672: RNCC: 3 | RNVC: 2

24 Feb 2006

5340-33-106-8137
Spring Tension Clip

331068137
411.097.0029: RNCC: 3 | RNVC: 2
5340000007: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-208-4002
Bumper

332084002
115009: RNCC: 3 | RNVC: 2
0042783: RNCC: 5 | RNVC: 2

13 May 2010

5340-33-206-9747
Mounting Bracket

332069747
TP250303: RNCC: 3 | RNVC: 2

1 Oct 2008

5340-33-209-1392
Access Cover

332091392
5051707: RNCC: 3 | RNVC: 2

22 Jun 2011

5340-33-188-8325
Flush Lock

331888325
6101031: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-33-208-3955
Dust And Moisture Seal Protective Cap

332083955
32301603: RNCC: 3 | RNVC: 2

7 May 2010

5340-33-208-7847
Mounting Bracket

332087847
D0931461947: RNCC: 3 | RNVC: 2

23 Feb 2011

5340-33-208-6351
Mounting Bracket

332086351
WW 201 444 AU: RNCC: 3 | RNVC: 2

11 Nov 2010

5340-33-209-1170
Mounting Bracket

332091170
MAAC030100000030: RNCC: 3 | RNVC: 2

16 Jun 2011

5340-33-209-3718
Access Cover

332093718
0738205920: RNCC: 3 | RNVC: 2

29 Nov 2011

5340-33-203-2742
Helical Compression Spring Retainer

332032742
9673.100.0052: RNCC: 3 | RNVC: 2
1005900388: RNCC: 5 | RNVC: 2
1005900388: RNCC: 5 | RNVC: 2

19 Feb 2004

5340-33-207-6436
Mounting Bracket

332076436
R0096736: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-004-8071
Utility Resilient Mount

330048071
SCM420NR75: RNCC: 3 | RNVC: 2

22 Oct 1999

5340-33-209-2302
Mounting Bracket

332092302
0750001010: RNCC: 3 | RNVC: 2

9 Aug 2011

5340-33-207-9094
Mounting Plate

332079094
09.02.01.10: RNCC: 3 | RNVC: 2

24 Nov 2009

5340-33-209-7704
Snap-In Hinged Standoff

332097704
563102: RNCC: 3 | RNVC: 2
563102: RNCC: 5 | RNVC: 2

23 Feb 2012

5340-33-209-3844
Mounting Plate

332093844
0738030930: RNCC: 3 | RNVC: 2

30 Nov 2011

5340-33-210-3775
Dust And Moisture Seal Protective Cap-Plug

332103775
1.120.14.02.001: RNCC: 3 | RNVC: 2

26 Sep 2012

5340-33-000-4406
Nut And Bolt Locking Plate

330004406
521679: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-206-0409
Multiple Angle Bracket

332060409
NN60963G01: RNCC: 3 | RNVC: 2

10 Jul 2007

5340-33-204-6013
Double Angle Bracket

332046013
5038424: RNCC: 3 | RNVC: 2

27 Oct 2005

5340-33-209-8040
Access Cover

332098040
H081 4118: RNCC: 3 | RNVC: 2

7 Mar 2012

5340-33-207-4806
Mounting Bracket

332074806
D57085: RNCC: 3 | RNVC: 2

24 Apr 2009

5340-33-190-2561
Spring Tension Clip

331902561
44319: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-210-6140
Webbing Strap

332106140
0220350: RNCC: 3 | RNVC: 2

30 Nov 2012

5340-33-155-8746

5340-33-207-8066
Bumper

332078066
2012906: RNCC: 3 | RNVC: 2

22 Oct 2009

5340-33-209-6782
Access Cover

332096782
AU_027_P150: RNCC: 3 | RNVC: 2

31 Jan 2012

5340-33-181-1118
Helical Compression Spring Seat

331811118
-19227-99000: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-157-8241
Double Angle Bracket

331578241
743925: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-205-4415
Barra De Remolque

332054415
5040019: RNCC: 3 | RNVC: 2
1.143.31.053: RNCC: 5 | RNVC: 2

29 Sep 2006

5340-33-190-2573
Spring Tension Clip

331902573
44309: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-3741
Dust And Moisture Seal Protective Cap

332003741
221010130: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-155-4145
Helical Compression Spring Seat

331554145
514693.95: RNCC: 3 | RNVC: 2
514693 95: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-210-1347
Mounting Bracket

332101347
GCRM16522A: RNCC: 3 | RNVC: 2

6 Jun 2012

5340-33-004-5248
Dust And Moisture Seal Protective Plug

330045248
9014700005: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-154-7853
Berolas

331547853
68: RNCC: 3 | RNVC: 2

21 Jan 1991

5340-33-108-2502
Spacing Threaded Standoff

331082502
9644.250.2420: RNCC: 3 | RNVC: 2
2510009070: RNCC: 5 | RNVC: 2
2510009070: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-002-0903
Dust And Moisture Seal Protective Plug

330020903
550280: RNCC: 3 | RNVC: 2

30 Oct 1992

5340-33-003-2461
Mechanic Equipment Hardware Kit

330032461
221023570: RNCC: 3 | RNVC: 2

13 Feb 1997

5340-33-209-5092
Mounting Bracket

332095092
606ME723001: RNCC: 3 | RNVC: 2

16 Jan 2012

5340-33-207-9205
Cushioning Pad

332079205
201261180: RNCC: 3 | RNVC: 2
PFE20126118000: RNCC: 5 | RNVC: 2

27 Nov 2009

5340-33-200-3369
No Metalico Tope

332003369
036.416.204: RNCC: 3 | RNVC: 2

11 Jan 2002

5340-33-206-9254
Dust And Moisture Seal Protective Cap Set

332069254
125253: RNCC: 3 | RNVC: 2

19 Sep 2008

5340-33-206-7960
Stand Base

332067960
CBD58505P52: RNCC: 3 | RNVC: 2

25 Jun 2008

5340-33-207-5946
Retaining Band

332075946
0754050030: RNCC: 3 | RNVC: 2

6 Jul 2009

5340-33-155-7844
Double Angle Bracket

331557844
755128: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-115-8790
Grooved Clamp Coupling Ferrule

331158790
6TX: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-33-155-7842
Double Angle Bracket

331557842
697468: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-210-6018
Access Cover

332106018
TP201098: RNCC: 3 | RNVC: 2

27 Nov 2012

5340-33-208-4079
Compression Cup

332084079
50409: RNCC: 3 | RNVC: 2

19 May 2010

5340-33-116-3349
Spring Holder

331163349
5270.082: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-2536
Manual Control Lever

331082536
9644.251.0260: RNCC: 3 | RNVC: 2
2510009397: RNCC: 5 | RNVC: 2
2510009397: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-207-6310
Multiple Angle Bracket

332076310
R0096446: RNCC: 3 | RNVC: 2

16 Jul 2009

5340-33-209-5455
Access Cover

332095455
0750035241: RNCC: 3 | RNVC: 2

17 Jan 2012

5340-33-206-9858
Angle Bracket

332069858
TP250313: RNCC: 3 | RNVC: 2

3 Oct 2008

5340-33-180-7225
Double Angle Bracket

331807225
272185: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-181-6347
Double Angle Bracket

331816347
-01700428-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-210-6294
Webbing Strap

332106294
23582201: RNCC: 3 | RNVC: 2

2 Dec 2012

5340-33-187-4803
P Placa De Montaje

331874803
NRC3892F2: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-004-7013
Multiple Angle Bracket

330047013
NN60148P01: RNCC: 3 | RNVC: 2

3 Sep 1999

5340-33-156-2830
Headless Grooved Rod

331562830
-28841-Y9500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-6467
Dust And Moisture Seal Protective Cap

330046467
521315: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-155-7859
Double Angle Bracket

331557859
312937: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-108-2933
Montajes Soporte

5340-33-116-2703
Acceso: Tapa

5340-33-114-4958

5340-33-104-7918
Double Angle Bracket

331047918
W290676908000: RNCC: 3 | RNVC: 2

13 Sep 1995

5340-33-204-6075
Spring Tension Clip

332046075
09408A00118: RNCC: 3 | RNVC: 2

2 Nov 2005

5340-33-105-6676
Helical Compression Spring Seat

331056676
0642605: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-206-3302
Utility Resilient Mount

332063302
GOMA0023007: RNCC: 3 | RNVC: 2

13 Nov 2007

5340-33-207-6922
Multiple Angle Bracket

332076922
5041955: RNCC: 3 | RNVC: 2
1.141.72.024: RNCC: 5 | RNVC: 2

11 Aug 2009

5340-33-155-3924
Manual Control Handle

331553924
316442: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-161-4308
Double Angle Bracket

331614308
203150: RNCC: 3 | RNVC: 2

21 Sep 1995

5340-33-201-1438
Utility Resilient Mount

332011438
SP05894: RNCC: 3 | RNVC: 2

16 May 2002

5340-33-200-7366
Nut And Bolt Locking Plate

332007366
6110611508: RNCC: 3 | RNVC: 2

5 Mar 2002

5340-33-210-1333
Multiple Angle Bracket

332101333
GCRM0000A-C: RNCC: 3 | RNVC: 2

6 Jun 2012

5340-33-000-1948
Double Angle Bracket

330001948
901101: RNCC: 1 | RNVC: 2
901101: RNCC: 3 | RNVC: 2

10 Dec 1986

5340-33-201-0175
Double Angle Bracket

332010175
2910000336: RNCC: 3 | RNVC: 2
2910000336: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-105-9110
Dust And Moisture Seal Boot

331059110
993795C: RNCC: 3 | RNVC: 2

13 Feb 1997

5340-33-205-7180
Utility Resilient Mount

332057180
0216633: RNCC: 3 | RNVC: 2

1 Mar 2007

5340-33-209-0110
Mounting Bracket

332090110
AGC028145L00: RNCC: 3 | RNVC: 2

24 May 2011

5340-33-004-7807
Escutcheon Plate

330047807
-1145005-0: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-33-161-3649
Dust And Moisture Seal Protective Cap-Plug

331613649
582885: RNCC: 3 | RNVC: 2

31 Oct 1996

5340-33-105-0627
Multiple Angle Bracket

331050627
PCT0033: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-201-4445
Electronic Equipment Hardware Kit

332014445
W290675512006: RNCC: 3 | RNVC: 2

22 Jul 2002

5340-33-003-2894
Mechanic Equipment Hardware Kit

330032894
221023935: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-202-4782
Rodillo Nylon

332024782
3.031.73.005: RNCC: 3 | RNVC: 2
5023762: RNCC: 5 | RNVC: 2

7 Jul 2003

5340-33-106-7492
Manual Control Handle

331067492
2510.003498: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-200-6604
Sealing Plug Assembly

332006604
7562.252.0091: RNCC: 3 | RNVC: 2
4730002478: RNCC: 5 | RNVC: 2

21 Feb 2002

5340-33-202-5300
Double Angle Bracket

332025300
MHC2120320: RNCC: 3 | RNVC: 2
MHC1120320: RNCC: 5 | RNVC: 2

4 Aug 2003

5340-33-208-7168
Elastic Strap

332087168
111010: RNCC: 3 | RNVC: 2

12 Jan 2011

5340-33-103-0957
Manual Control Handle

331030957
411.091.0644: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-4140
Double Angle Bracket

332114140
62022304: RNCC: 3 | RNVC: 2

24 Oct 2013

5340-33-126-3437
Resilient Mount Plate

331263437
9.302.1.653.008.5: RNCC: 3 | RNVC: 2

4 Nov 1992

5340-33-155-7863
Double Angle Bracket

331557863
558243: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-208-7707
Webbing Strap

332087707
23509310: RNCC: 3 | RNVC: 2

18 Feb 2011

5340-33-206-7937
Mounting Bracket

332067937
CBD58505G14: RNCC: 3 | RNVC: 2

24 Jun 2008

5340-33-002-9170
Dust And Moisture Seal Protective Cap

330029170
6150100076: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-107-7879
Multiple Angle Bracket

331077879
W290684606600: RNCC: 3 | RNVC: 2

3 Aug 2000

5340-33-000-4419
Nut And Bolt Locking Plate

330004419
554072: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-116-5469
Double Angle Bracket

331165469
16598-ZE1-000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-190-2547
Spring Tension Clip

331902547
44342: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-1890
Dust And Moisture Seal Protective Plug

332061890
CBD58505P16: RNCC: 3 | RNVC: 2

20 Sep 2007

5340-33-153-8931
Manual Control Handle

331538931
573187: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-211-2867
Double Angle Bracket

332112867
TP252623: RNCC: 3 | RNVC: 2

9 Aug 2013

5340-33-115-8788
Grooved Clamp Coupling Ferrule

331158788
8TX: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-33-180-8229
Double Angle Bracket

331808229
598848: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-115-6103
Headless Straight Rod

331156103
10205001500: RNCC: 3 | RNVC: 2

27 Apr 1995

5340-33-108-2305
Metallic Solid Wheel

331082305
9644.101.0169: RNCC: 3 | RNVC: 2
1005900048: RNCC: 5 | RNVC: 2
1005900048: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-003-2895
Mechanic Equipment Hardware Kit

330032895
221023945: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-209-5632
Mounting Plate

332095632
0738053320: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-33-209-7645
Bow Handle

332097645
230.122: RNCC: 3 | RNVC: 2

22 Feb 2012

5340-33-201-7275
Multiple Angle Bracket

332017275
NN60524G01: RNCC: 3 | RNVC: 2

15 Oct 2002

5340-33-211-2181
Multiple Angle Bracket

332112181
TP252338: RNCC: 3 | RNVC: 2

9 Jul 2013

5340-33-208-9464
Manual Control Lever

332089464
CNB06000A: RNCC: 3 | RNVC: 2

18 May 2011

5340-33-204-4774
Dust And Moisture Seal Protective Cap-Plug

332044774
62071-7F000: RNCC: 3 | RNVC: 2

20 Sep 2005

5340-33-202-3655
Utility Resilient Mount

332023655
73-60007-00: RNCC: 3 | RNVC: 2

25 Apr 2003

5340-33-107-7838
Sealing Plug Assembly

331077838
523-150.11: RNCC: 3 | RNVC: 2

18 May 2000

5340-33-161-1456
Manual Control Handle

331611456
311742: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-116-2477
Helical Compression Spring Seat

331162477
109.853.11: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-7939
Dust And Moisture Seal Protective Plug

332007939
315884: RNCC: 3 | RNVC: 2

12 Mar 2002

5340-33-206-6522
Mounting Plate

332066522
280.25.150.07012: RNCC: 3 | RNVC: 2

11 Apr 2008

5340-33-203-9136
Spring Holder

332039136
2510011227: RNCC: 3 | RNVC: 2
7356.252.0789: RNCC: 5 | RNVC: 2

11 Jan 2005

5340-33-105-9326
Helical Compression Spring Seat

331059326
312.508: RNCC: 3 | RNVC: 2

28 Aug 1996

5340-33-003-2920
Double Angle Bracket

330032920
721022702: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-201-6707
Spacing Threaded Standoff

332016707
98P41015: RNCC: 3 | RNVC: 2
00017: RNCC: 5 | RNVC: 2

27 Sep 2002

5340-33-106-2078
Manual Control Handle

331062078
190355: RNCC: 3 | RNVC: 2
15100422: RNCC: 5 | RNVC: 9

24 Oct 1997

5340-33-206-9050
Webbing Strap

332069050
PR0005: RNCC: 3 | RNVC: 2

15 Sep 2008

5340-33-107-6604
Flush Lock

331076604
98416359: RNCC: 3 | RNVC: 2

17 Apr 2000

5340-33-201-8101
Double Angle Bracket

332018101
7055.412.0012: RNCC: 3 | RNVC: 2
2510701562: RNCC: 5 | RNVC: 2

25 Oct 2002

5340-33-187-3166
Dust And Moisture Seal Boot

331873166
526467: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-7232
Helical Compression Spring Seat

331547232
544449.95: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-004-7079
Multiple Angle Bracket

330047079
NN60294: RNCC: 1 | RNVC: 2
NN60294G01: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-33-200-5683
Quick Release Plunger

332005683
SPA800011: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-33-204-3462
Spring Tension Clip

332043462
09209-14001: RNCC: 3 | RNVC: 2
09209-14001: RNCC: 5 | RNVC: 2

19 Jul 2005

5340-33-002-9514
Dust And Moisture Seal Protective Cap

330029514
6316890283: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-155-7864
Double Angle Bracket

331557864
751087: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-201-8044
Double Angle Bracket

332018044
319888: RNCC: 3 | RNVC: 2

25 Oct 2002

5340-33-207-6937
Mounting Plate

332076937
5042957: RNCC: 3 | RNVC: 2
1.141.72.026: RNCC: 5 | RNVC: 2

12 Aug 2009

5340-33-203-7287
Hand Crank

332037287
DF 407 673 AE: RNCC: 3 | RNVC: 2

11 Sep 2004

5340-33-157-7499
Dust And Moisture Seal Protective Cap

331577499
540611: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-210-2339
Helical Compression Spring Seat

332102339
249770207: RNCC: 3 | RNVC: 2
249770207: RNCC: 5 | RNVC: 2

5 Jul 2012

5340-33-160-3854
Spring Tension Clip

331603854
79.03.079.073: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-209-2134
Mounting Bracket

332092134
0750042400: RNCC: 3 | RNVC: 2

21 Jul 2011

5340-33-210-7623
Retaining Strap

332107623
125259: RNCC: 3 | RNVC: 2

5 Feb 2013

5340-33-204-6159
Cristal De Pantalla

332046159
5030600: RNCC: 3 | RNVC: 2

4 Nov 2005

5340-33-200-5844
Dust And Moisture Seal Protective Cap

332005844
FRC6872: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-33-204-4976
Utility Resilient Mount

332044976
SCM225NR45: RNCC: 3 | RNVC: 2

29 Sep 2005

5340-33-157-7846
Double Angle Bracket

331577846
630106: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-7512
P Placa De Montaje

332017512
N1010402: RNCC: 3 | RNVC: 2

21 Oct 2002

5340-33-003-2898
Mechanic Equipment Hardware Kit

330032898
221023965: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-000-0497
Nut And Bolt Locking Plate

330000497
1306J00090: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-204-9199
Helical Compression Spring Seat

332049199
12933-38400: RNCC: 3 | RNVC: 2

22 Feb 2006

5340-33-205-4140
Double Angle Bracket

332054140
W290620371400: RNCC: 3 | RNVC: 2

15 Sep 2006

5340-33-116-2281
Manual Control Handle

331162281
300.735: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-5434
Dust And Moisture Seal Protective Cap

332075434
9041 50: RNCC: 3 | RNVC: 2

12 Jun 2009

5340-33-190-2562
Spring Tension Clip

331902562
44320: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-107-4565
Mechanic Equipment Hardware Kit

331074565
W290679200800: RNCC: 3 | RNVC: 2

4 Nov 1999

5340-33-201-7911
Double Angle Bracket

332017911
NN60638P01: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-33-107-4135
Multiple Angle Bracket

331074135
7062.252.0600: RNCC: 3 | RNVC: 2
2510700562: RNCC: 5 | RNVC: 2

15 Oct 1999

5340-33-000-4403
Nut And Bolt Locking Plate

330004403
518247: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-202-0244
Spring Holder

332020244
423205005100: RNCC: 3 | RNVC: 2

17 Dec 2002

5340-33-002-9064
Dust And Moisture Seal Protective Cap

330029064
3097270648: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-201-0471
Spacing Threaded Standoff

332010471
5365000774: RNCC: 3 | RNVC: 2
5365000774: RNCC: 5 | RNVC: 2

24 Apr 2002

5340-33-204-4895
Spacing Threaded Standoff

332044895
730131402: RNCC: 3 | RNVC: 2

22 Sep 2005

5340-33-000-4435
Nut And Bolt Locking Plate

330004435
809120: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-002-8116
Window Regulator Handle

330028116
0004453812: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-181-1139
Dust And Moisture Seal Protective Cap

331811139
-19261-37501: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-1357
Utility Resilient Mount

332011357
906 508: RNCC: 3 | RNVC: 2

16 May 2002

5340-33-001-8890
Hand Crank

330018890
333216101: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-209-6258
Butt Hinge

332096258
0750038171: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-33-200-1151
Multiple Angle Bracket

332001151
7053.252.0064: RNCC: 3 | RNVC: 2
2510700021: RNCC: 5 | RNVC: 2

8 Oct 2001

5340-33-107-7353
Double Angle Bracket

331077353
7562.252.1840: RNCC: 3 | RNVC: 2
2510700636: RNCC: 5 | RNVC: 2

20 Jun 2000

5340-33-106-3270
Dust And Moisture Seal Protective Cap

331063270
5430.172: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-004-7098
Double Angle Bracket

330047098
NN60090P01: RNCC: 3 | RNVC: 2

10 Sep 1999

5340-33-108-2838
Spacing Threaded Standoff

331082838
9644.251.0079: RNCC: 3 | RNVC: 2
5315002385: RNCC: 5 | RNVC: 2
5315002385: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-105-0636
Multiple Angle Bracket

331050636
PCT0042: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-202-9929
Conjunto Mango

332029929
223552113-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-103-2129
Manual Control Handle

331032129
9225.15.112506: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-0658
Escutcheon Plate

331600658
9120.74: RNCC: 3 | RNVC: 2

21 Sep 1995

5340-33-207-7334
Mounting Bracket

332077334
5045877: RNCC: 3 | RNVC: 2
2.196.013: RNCC: 5 | RNVC: 2

23 Sep 2009

5340-33-126-2222
Manual Control Handle

331262222
99237119: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-126-9205
Dust And Moisture Seal Protective Cap-Plug

331269205
202051: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-208-4430
Mending Plate

332084430
INS003112990040000: RNCC: 3 | RNVC: 2

25 Jun 2010

5340-33-000-7775
Spring Tension Clip

330007775
426200020200000: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-003-2881
Mechanic Equipment Hardware Kit

330032881
221023780: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-207-6320
Mounting Bracket

332076320
R0095008: RNCC: 3 | RNVC: 2

16 Jul 2009

5340-33-209-8469
Snap Hook

332098469
200-85: RNCC: 3 | RNVC: 2

15 Mar 2012

5340-33-160-7535
Dust And Moisture Seal Protective Cap

331607535
79.32.580.603: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-209-1608
Mounting Bracket

332091608
INS003002050020000: RNCC: 3 | RNVC: 2

6 Jul 2011

5340-33-190-2554
Spring Tension Clip

331902554
44329: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-6924
Guia Derecha

332076924
5042948: RNCC: 3 | RNVC: 2
1.141.72.001: RNCC: 5 | RNVC: 2

11 Aug 2009

5340-33-105-6267
Dust And Moisture Seal Protective Cap

331056267
-26029-Y9525: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-33-208-5220
Mounting Bracket

332085220
TAYK0001B: RNCC: 3 | RNVC: 2

6 Aug 2010

5340-33-181-3596
Spring Tension Clip

331813596
-01801072-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-108-2978
P Cerradura Hembra

5340-33-125-8165
Cierre A Pres Tapon

5340-33-207-6705
Mounting Bracket

332076705
R0096699: RNCC: 3 | RNVC: 2

29 Jul 2009

5340-33-116-8191
Headless Straight Rod

331168191
M-113-1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-6956
De Pres Abrazadera

5340-33-200-6412
Double Angle Bracket

332006412
7562.252.1030: RNCC: 3 | RNVC: 2
2510010792: RNCC: 5 | RNVC: 2

14 Feb 2002

5340-33-116-3418
Dust And Moisture Seal Protective Cap

331163418
9032.019: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-114-4765
Manual Control Handle

331144765
ART.NR.WZ 14406: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-106-3330
Metalico Tope

331063330
920378: RNCC: 3 | RNVC: 2

11 Sep 1997

5340-33-003-5117
Dust And Moisture Seal Protective Cap

330035117
6316890087: RNCC: 3 | RNVC: 2

13 Nov 1997

5340-33-160-7551
Dust And Moisture Seal Protective Cap

331607551
79.03.075.004: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-116-1841
Helical Compression Spring Seat

331161841
1932 080: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-7184
Lock Bar

332077184
5042915: RNCC: 3 | RNVC: 2
2.196.002: RNCC: 5 | RNVC: 2

16 Sep 2009

5340-33-125-7438
Acceso Tapa

5340-33-208-6363
Mounting Bracket

332086363
R0109532: RNCC: 3 | RNVC: 2

12 Nov 2010

5340-33-161-3802
Multiple Angle Bracket

331613802
616757: RNCC: 3 | RNVC: 2
63100012: RNCC: 5 | RNVC: 9

20 Jul 1995

5340-33-201-5267
Helical Compression Spring Seat

332015267
9644.101.0131: RNCC: 3 | RNVC: 2
1005006595: RNCC: 5 | RNVC: 2
1005006595: RNCC: 5 | RNVC: 2

22 Aug 2002

5340-33-204-0313
Manual Control Lever

332040313
9502.103.8288: RNCC: 3 | RNVC: 2
1010900151: RNCC: 5 | RNVC: 2

7 Feb 2005

5340-33-002-9513
Dust And Moisture Seal Protective Cap

330029513
6316890083: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-208-8367
Mounting Plate

332088367
INS003066990030100: RNCC: 3 | RNVC: 2

16 Mar 2011

5340-33-116-4717
Clip Retainer Plate

331164717
10203000151: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-33-160-2981
Angular Soporte

5340-33-209-6230
Mounting Plate

332096230
0750030411: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-33-208-5603
Manual Control Lever

332085603
R0111040: RNCC: 3 | RNVC: 2

28 Sep 2010

5340-33-125-7436
Acceso Tapa

5340-33-200-9476
Montajes Placa

5340-33-107-4579
Electronic Equipment Hardware Kit

331074579
W290680702600: RNCC: 3 | RNVC: 2

15 Nov 1999

5340-33-161-1489
Manual Control Lever

331611489
316396: RNCC: 3 | RNVC: 2
316396: RNCC: 5 | RNVC: 2

11 Dec 1992

5340-33-160-3815
Window Retaining Plate

331603815
79.03.081.065: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-2000
Acceso Tapa

5340-33-105-6677
Helical Compression Spring Seat

331056677
0642298: RNCC: 3 | RNVC: 2

16 Oct 1997

5340-33-108-5085
Spring Tension Clip

331085085
195253: RNCC: 3 | RNVC: 2

16 Apr 2001

5340-33-209-7683
Mounting Plate

332097683
0754050010: RNCC: 3 | RNVC: 2

23 Feb 2012

5340-33-125-7479
Presilla Abrazadera

5340-33-125-7478
Presilla Abrazadera

5340-33-155-0995

5340-33-107-0846
Exterior: Cerrojo

5340-33-004-7096
Double Angle Bracket

330047096
NN60081P01: RNCC: 3 | RNVC: 2

10 Sep 1999

5340-33-103-7642
Empunadura Equipada

331037642
300B197: RNCC: 3 | RNVC: 2

20 Dec 1994

5340-33-203-6863
Utility Resilient Mount

332036863
2123303010: RNCC: 3 | RNVC: 2

24 Aug 2004

5340-33-005-2727
Spring Loaded Cylinder Fastener

330052727
99.08.94: RNCC: 3 | RNVC: 2

26 Mar 2001

5340-33-000-2035
Dust And Moisture Seal Protective Plug

330002035
100212: RNCC: 1 | RNVC: 2

11 Dec 1986

5340-33-209-0472
Plug Button

332090472
D0941311471: RNCC: 3 | RNVC: 2

26 May 2011

5340-33-201-3783
Dust And Moisture Seal Protective Plug

332013783
722366103: RNCC: 3 | RNVC: 2

2 Jul 2002

5340-33-209-9658
Electronic Equipment Hardware Kit

332099658
1040-4400: RNCC: 3 | RNVC: 2

12 Apr 2012

5340-33-209-8207
Lock-Release Lever

332098207
1170026: RNCC: 3 | RNVC: 2

12 Mar 2012

5340-33-161-3878
Multiple Angle Bracket

331613878
633005: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-203-6881
Dust And Moisture Seal Protective Cap

332036881
S21150: RNCC: 3 | RNVC: 2

24 Aug 2004

5340-33-207-6438
Mounting Bracket

332076438
R0096829: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-155-8460
Seal Retaining Plate

331558460
8330980443: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-107-3082
Spacing Threaded Standoff

331073082
21124811500: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-207-6252
Bumper

332076252
DF 404 662 AX: RNCC: 3 | RNVC: 2
DF 404 663 AX: RNCC: 5 | RNVC: 2

14 Jul 2009

5340-33-000-6459
Helical Compression Spring Seat

330006459
514708 95: RNCC: 1 | RNVC: 2

15 Jun 1988

5340-33-105-9271
Manual Control Lever

331059271
16527: RNCC: 3 | RNVC: 2

27 Aug 1996

5340-33-210-0616
Webbing Strap

332100616
00235-1-50+05744-50 2500/1000: RNCC: 3 | RNVC: 2

18 May 2012

5340-33-116-1303
Helical Compression Spring Retainer

331161303
BA-18872000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-8136
Helical Compression Spring Retainer

332038136
36050-24512: RNCC: 3 | RNVC: 2
SP06470: RNCC: 5 | RNVC: 2

4 Nov 2004

5340-33-156-4558
Asientos Bisagra

331564558
-88800-Y9500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-3823
Helical Compression Spring Seat

331543823
620129: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-116-8323
Manual Control Handle

331168323
MA: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-105-1491
Dust And Moisture Seal Protective Plug

331051491
631 766 04 56: RNCC: 3 | RNVC: 2
631 766 04 56: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-160-5942
Seal Retaining Plate

331605942
95.631.555: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-9625
Window Regulator Handle

330029625
6317600002: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-206-5069
Manual Control Lever

332065069
0555003100: RNCC: 3 | RNVC: 2

12 Feb 2008

5340-33-126-9166
Hand Crank

331269166
04002100: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-203-8004
Utility Resilient Mount

332038004
5718013: RNCC: 3 | RNVC: 2

27 Oct 2004

5340-33-002-1752
Terminal

330021752
35-82247-0403: RNCC: 3 | RNVC: 2

12 Jul 1993

5340-33-207-5804
Bumper

332075804
DF 404 665 AX: RNCC: 3 | RNVC: 2
DF 404 664 AX: RNCC: 5 | RNVC: 2

30 Jun 2009

5340-33-209-4164
Mounting Plate

332094164
0738045500: RNCC: 3 | RNVC: 2

7 Dec 2011

5340-33-004-8748
Multiple Angle Bracket

330048748
NN60273G01: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-33-155-7853
Double Angle Bracket

331557853
579921: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-160-2797
Muelle Helico Reten

5340-33-160-2139
Presilla Abrazadera

5340-33-003-0766
Dust And Moisture Seal Protective Cap-Plug

330030766
01658-00721: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-206-9744
Double Angle Bracket

332069744
TP251740: RNCC: 3 | RNVC: 2

1 Oct 2008

5340-33-209-8465
Snap Hook

332098465
192-160: RNCC: 3 | RNVC: 2

15 Mar 2012

5340-33-209-9764
Butt Hinge

332099764
189045900: RNCC: 3 | RNVC: 2

16 Apr 2012

5340-33-160-3912
No Metalico Tope

331603912
95.601.238: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-3639
Manual Control Handle

331553639
173999: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-33-125-8510
Acceso Tapa

5340-33-160-2793
Muelle Helico Reten

5340-33-160-2823
Sujecion Brida

5340-33-155-7877
Double Angle Bracket

331557877
630779: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-004-5754
Flush Lock

330045754
98411950: RNCC: 3 | RNVC: 2

29 Jun 1999

5340-33-155-6461
Helical Compression Spring Seat

331556461
180598.61: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-125-8037
Acceso Tapa

5340-33-156-2361
Double Angle Bracket

331562361
-48569-G9500: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-004-7090
Double Angle Bracket

330047090
NN60160P02: RNCC: 3 | RNVC: 2

10 Sep 1999

5340-33-108-4467
Manual Control Lever

331084467
9644.251.7050: RNCC: 3 | RNVC: 2
2540001456: RNCC: 5 | RNVC: 2
2540001456: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-000-2862
Helical Compression Spring Seat

330002862
647120: RNCC: 1 | RNVC: 2

13 Mar 1997

5340-33-156-0387

5340-33-156-0365

5340-33-156-0319

5340-33-206-8956
Mortise Latch Set

332068956
20.00.65: RNCC: 3 | RNVC: 2
235173: RNCC: 5 | RNVC: 2

5 Sep 2008

5340-33-207-1266
Mounting Bracket

332071266
PCMSABMR142: RNCC: 3 | RNVC: 2

25 Nov 2008

5340-33-206-9684
Spacing Threaded Standoff

332069684
F3-20207: RNCC: 3 | RNVC: 2

30 Sep 2008

5340-33-207-7873
Caster Wheel

332077873
KRF 7125: RNCC: 3 | RNVC: 2

16 Oct 2009

5340-33-207-6499
Mounting Bracket

332076499
R0094797: RNCC: 3 | RNVC: 2

21 Jul 2009

5340-33-207-8175
Mounting Bracket

332078175
R0095530: RNCC: 3 | RNVC: 2

23 Oct 2009

5340-33-154-8365
Manual Control Handle

331548365
9045.6A: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-207-2168
Mounting Plate

332072168
3314-301: RNCC: 3 | RNVC: 2

19 Jan 2009

5340-33-202-8749
Seal Retaining Plate

332028749
VR01240300: RNCC: 3 | RNVC: 2

17 Nov 2003

5340-33-158-1515
Dust And Moisture Seal Boot

331581515
625467: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-33-204-3039
Dust And Moisture Seal Protective Cap

332043039
SP06961: RNCC: 3 | RNVC: 2

27 Jun 2005

5340-33-003-2907
Dust And Moisture Seal Protective Cap

330032907
721023315: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-153-8934
Manual Control Handle

331538934
583509: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-107-3094
Spacing Threaded Standoff

331073094
21124822000: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-204-1135
Manual Control Handle

332041135
064.06.13: RNCC: 3 | RNVC: 2

30 Mar 2005

5340-33-004-4939
Manual Control Handle

330044939
0738731: RNCC: 3 | RNVC: 2

2 Jun 1999

5340-33-207-8117
Mounting Bracket

332078117
R0096473: RNCC: 3 | RNVC: 2

22 Oct 2009

5340-33-201-8172
Angular: Soporte

5340-33-207-4965
Bumper

332074965
7017594: RNCC: 3 | RNVC: 2
10187328: RNCC: 6 | RNVC: 9

7 May 2009

5340-33-208-0710
Mounting Bracket

332080710
610CM110002: RNCC: 3 | RNVC: 2

9 Feb 2010

5340-33-004-5252
Dust And Moisture Seal Protective Plug

330045252
786910: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-004-1781
Manual Control Handle

330041781
3M6D00: RNCC: 3 | RNVC: 2

1 Sep 1998

5340-33-000-2033
Dust And Moisture Seal Protective Plug

330002033
090212: RNCC: 1 | RNVC: 2

11 Dec 1986

5340-33-160-2837
Sujecion Abrazadera

5340-33-189-2282

5340-33-160-3860
Spring Tension Clip

331603860
75.524.240: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-1041
Dust And Moisture Seal Protective Cap

332001041
7054.292.0150: RNCC: 3 | RNVC: 2
2540700107: RNCC: 5 | RNVC: 2

5 Oct 2001

Load More Results