What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 32 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 32 of 39

5340-33-205-3272
Utility Resilient Mount

332053272
0511367: RNCC: 3 | RNVC: 2

27 Jul 2006

5340-33-000-4430
Nut And Bolt Locking Plate

330004430
639010: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-201-1180
Utility Resilient Mount

332011180
SCM125NR75: RNCC: 3 | RNVC: 2

13 May 2002

5340-33-200-5226
Hand Crank

332005226
19592102: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-116-3117
Double Angle Bracket

331163117
1595.012: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-8197
Multiple Angle Bracket

331068197
7356.252.2660: RNCC: 3 | RNVC: 2
2510010782: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-200-0192
Multiple Angle Bracket

332000192
NN60523P01: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-33-202-8746
Seal Retaining Plate

332028746
VR09260000: RNCC: 3 | RNVC: 2

17 Nov 2003

5340-33-203-2058
Utility Resilient Mount

332032058
5340000573: RNCC: 3 | RNVC: 2
5340000573: RNCC: 5 | RNVC: 2

16 Feb 2004

5340-33-205-0731
Spring Tension Clip

332050731
13671-29FA0: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-33-210-6020
Access Cover

332106020
TP201100: RNCC: 3 | RNVC: 2

27 Nov 2012

5340-33-209-0387
Mounting Bracket

332090387
AGC028315HTL: RNCC: 3 | RNVC: 2

26 May 2011

5340-33-103-8404
Helical Compression Spring Retainer

331038404
X-27: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-5326
Double Angle Bracket

331085326
9644.590.0030: RNCC: 3 | RNVC: 2
2510007394: RNCC: 5 | RNVC: 2
2510007394: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-000-4398
Nut And Bolt Locking Plate

330004398
512145: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-200-4504
Dirt And Liquid Deflector

332004504
WW 458 546 AR: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-107-7029
Mechanic Equipment Hardware Kit

331077029
7562.252.1630: RNCC: 3 | RNVC: 2
2510700372: RNCC: 5 | RNVC: 2

17 Apr 2000

5340-33-206-2535
Parach Goma Banda

332062535
7143749: RNCC: 3 | RNVC: 2

16 Oct 2007

5340-33-210-4192
Angle Bracket

332104192
622035203: RNCC: 3 | RNVC: 2

1 Oct 2012

5340-33-208-1471
Loop Clamp

332081471
BB36140: RNCC: 3 | RNVC: 2
M20693B: RNCC: 5 | RNVC: 9

4 Mar 2010

5340-33-210-4324
Butt Hinge

332104324
1.120.31.11.008: RNCC: 3 | RNVC: 2

2 Oct 2012

5340-33-201-8034
Mechanic Equipment Hardware Kit

332018034
319749: RNCC: 3 | RNVC: 2

25 Oct 2002

5340-33-105-5418
Window Regulator Handle

331055418
753584: RNCC: 3 | RNVC: 2
12100432: RNCC: 5 | RNVC: 9

9 May 1996

5340-33-155-7839
Double Angle Bracket

331557839
320924: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-204-6149
Double Angle Bracket

332046149
5029678: RNCC: 3 | RNVC: 2

4 Nov 2005

5340-33-108-1220
Spring Tension Clip

331081220
1 66 283: RNCC: 3 | RNVC: 2

28 Dec 2000

5340-33-207-4964
Access Cover

332074964
D5710: RNCC: 3 | RNVC: 2

7 May 2009

5340-33-160-2826
Entrada-Salid Marco

5340-33-161-0774
Proteccion Manguito

5340-33-201-8105
Mechanic Equipment Hardware Kit

332018105
317893: RNCC: 3 | RNVC: 2

25 Oct 2002

5340-33-205-0154
Antipilferage Seal Locking Wire

332050154
19658370: RNCC: 3 | RNVC: 2

31 Mar 2006

5340-33-003-7322
Sealing Plug Assembly

330037322
WW404811: RNCC: 3 | RNVC: 2

5 Jun 1998

5340-33-202-7793
Manual Control Lever

332027793
00076242: RNCC: 3 | RNVC: 2

28 Oct 2003

5340-33-160-3262
Acoplamiento Cabeza

331603262
1660020: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-6486
Flush Lock

332006486
230326: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-33-126-8100
Helical Compression Spring Seat

331268100
190430: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-208-5898
Double Angle Bracket

332085898
019648015: RNCC: 3 | RNVC: 2
019648015: RNCC: 5 | RNVC: 2

15 Oct 2010

5340-33-206-5361
Padlock

332065361
500-65: RNCC: 3 | RNVC: 2

21 Feb 2008

5340-33-107-4618
Double Angle Bracket

331074618
7356.592.1210: RNCC: 3 | RNVC: 2
2510011257: RNCC: 5 | RNVC: 2

15 Nov 1999

5340-33-126-4496
Acceso Tapa

5340-33-202-0587
Dust And Moisture Seal Protective Cap

332020587
1025-901723: RNCC: 3 | RNVC: 2

2 Jan 2003

5340-33-108-3653
Electronic Equipment Hardware Kit

331083653
9560 079 26400: RNCC: 3 | RNVC: 2

28 Feb 2001

5340-33-107-6471
Multiple Angle Bracket

331076471
7356.252.4970: RNCC: 3 | RNVC: 2
2510700812: RNCC: 5 | RNVC: 2

17 Apr 2000

5340-33-207-7939
Mounting Bracket

332077939
0140383035700: RNCC: 3 | RNVC: 2

19 Oct 2009

5340-33-210-1665
Mounting Bracket

332101665
1040-7860: RNCC: 3 | RNVC: 2

13 Jun 2012

5340-33-204-3460
Spring Tension Clip

332043460
PS-850075: RNCC: 3 | RNVC: 2

18 Jul 2005

5340-33-209-0720
Mounting Bracket

332090720
AGC028315HTR: RNCC: 3 | RNVC: 2

31 May 2011

5340-33-209-4170
Hand Crank

332094170
0738101400: RNCC: 3 | RNVC: 2

7 Dec 2011

5340-33-209-6381
Access Cover

332096381
0750035501: RNCC: 3 | RNVC: 2

24 Jan 2012

5340-33-209-7703
Mounting Bracket

332097703
563045: RNCC: 3 | RNVC: 2
563045: RNCC: 5 | RNVC: 2

23 Feb 2012

5340-33-207-7188
Lock Bar

332077188
5049256: RNCC: 3 | RNVC: 2
2.159.002-F: RNCC: 5 | RNVC: 2

16 Sep 2009

5340-33-005-0915
Retencion: Grapa

5340-33-106-6959
Dust And Moisture Seal Protective Plug

331066959
SE141521996A: RNCC: 3 | RNVC: 2

19 Jan 1999

5340-33-200-5987
Mechanic Equipment Hardware Kit

332005987
7562.252.1730: RNCC: 3 | RNVC: 2
2510700386: RNCC: 5 | RNVC: 2

6 Feb 2002

5340-33-206-0767
Multiple Angle Bracket

332060767
NN60953P01: RNCC: 3 | RNVC: 2

26 Jul 2007

5340-33-200-4373
Mechanic Equipment Hardware Kit

332004373
7125700001: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-107-1308
Dust And Moisture Seal Protective Cover

331071308
610601107: RNCC: 3 | RNVC: 2
PCAMI/RP/0361060117: RNCC: 6 | RNVC: 9

30 Jun 1999

5340-33-208-7497
Flush Catch Claw

332087497
DG01000-02-01: RNCC: 3 | RNVC: 2

1 Feb 2011

5340-33-200-4563
Escutcheon Plate

332004563
107.01.41: RNCC: 3 | RNVC: 2

29 Jan 2002

5340-33-161-3845
Spring Loaded Cylinder Fastener

331613845
631027: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-205-6309
Manual Control Lever

332056309
1025901972: RNCC: 3 | RNVC: 2
9743.100.0553: RNCC: 5 | RNVC: 2

23 Jan 2007

5340-33-002-8888
Dust And Moisture Seal Protective Cap

330028888
0008263124: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-102-5912
Escutcheon Plate

331025912
652-H: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-188-7869
Helical Compression Spring Seat

331887869
6.0690.72.5.2033: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-8276
Metallic Solid Wheel

332008276
9644.101.0048: RNCC: 3 | RNVC: 2
1005006356: RNCC: 5 | RNVC: 2
1005006356: RNCC: 5 | RNVC: 2

18 Mar 2002

5340-33-211-2180
Double Angle Bracket

332112180
TP252689: RNCC: 3 | RNVC: 2

9 Jul 2013

5340-33-105-1735
Window Regulator Handle

331051735
900523: RNCC: 3 | RNVC: 2
15100325: RNCC: 5 | RNVC: 9

6 Mar 1996

5340-33-157-8094
Double Angle Bracket

331578094
730895: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-190-2548
Spring Tension Clip

331902548
44323: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-181-6383
Spring Loaded Cylinder Fastener

331816383
-01902074-0: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-102-0205
Spring Holder

331020205
2510-000434: RNCC: 3 | RNVC: 2
411.090.5510: RNCC: 5 | RNVC: 2

6 Aug 1992

5340-33-207-9907
Access Cover

332079907
P15901273B2: RNCC: 3 | RNVC: 2
RA25REF4: RNCC: 5 | RNVC: 2
FS0003784: RNCC: 6 | RNVC: 9

22 Dec 2009

5340-33-116-8157
Dust And Moisture Seal Protective Cap-Plug

331168157
102.011.071: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-6955
Utility Resilient Mount

331086955
1728513: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-33-188-8324
Flush Lock

331888324
6102031: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-33-107-2864
Dust And Moisture Seal Protective Plug

331072864
122565: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-33-205-0719
Dirt And Liquid Deflector

332050719
19641000: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-33-210-9379
Utility Guard Rail Section

332109379
212-82641-1: RNCC: 3 | RNVC: 2

9 Apr 2013

5340-33-207-7385
Mounting Plate

332077385
0853681000100: RNCC: 3 | RNVC: 2

24 Sep 2009

5340-33-209-1796
Mounting Bracket

332091796
0750017300: RNCC: 3 | RNVC: 2

12 Jul 2011

5340-33-211-2877
Nonmetallic Solid Wheel

332112877
EP.63640-RFR-2: RNCC: 3 | RNVC: 2

9 Aug 2013

5340-33-156-2341
Double Angle Bracket

331562341
-28925-G2710: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-156-2166
Double Angle Bracket

331562166
-16712-G5500: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-000-4418
Nut And Bolt Locking Plate

330004418
553484: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-200-5867
Dust And Moisture Seal Protective Cap

332005867
CF 472 864 A: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-205-4134
Utility Access Door

332054134
5040310: RNCC: 3 | RNVC: 2
1.143.92.006: RNCC: 5 | RNVC: 2

15 Sep 2006

5340-33-204-5424
Spacing Threaded Standoff

332045424
703534104: RNCC: 3 | RNVC: 2

10 Oct 2005

5340-33-208-6375
Mounting Bracket

332086375
R0111985: RNCC: 3 | RNVC: 2

12 Nov 2010

5340-33-206-0769
Multiple Angle Bracket

332060769
NN60955P01: RNCC: 3 | RNVC: 2

26 Jul 2007

5340-33-200-0839
Mechanic Equipment Hardware Kit

332000839
7054.252.0900: RNCC: 3 | RNVC: 2
2510700873: RNCC: 5 | RNVC: 2

5 Oct 2001

5340-33-107-7473
Multiple Angle Bracket

331077473
W290684071300: RNCC: 3 | RNVC: 2

6 Jun 2000

5340-33-106-8863
Double Angle Bracket

331068863
7356.292.0203: RNCC: 3 | RNVC: 2
2520700001: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-201-2903
Strap Hinge Leaf

332012903
D0921311251: RNCC: 3 | RNVC: 2

17 Jun 2002

5340-33-206-9663
Handle Grip

332069663
590001: RNCC: 3 | RNVC: 2
9901000000: RNCC: 5 | RNVC: 2

29 Sep 2008

5340-33-004-6186
Helical Compression Spring Seat

330046186
0012665711: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-208-6272
Webbing Strap

332086272
9X7U7U35AZ53: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-33-115-6104
Headless Straight Rod

331156104
14206708040: RNCC: 3 | RNVC: 2

27 Apr 1995

5340-33-153-8943
Manual Control Handle

331538943
816670: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-126-2546
Dust And Moisture Seal Protective Cap

331262546
1088-48: RNCC: 3 | RNVC: 9

11 Jul 1995

5340-33-210-9427
Dust And Moisture Seal Protective Plug

332109427
10001169: RNCC: 3 | RNVC: 2
0738462: RNCC: 5 | RNVC: 2

10 Apr 2013

5340-33-204-0840
Parach Goma Banda

332040840
LXXE00KIASECU00: RNCC: 3 | RNVC: 2

11 Mar 2005

5340-33-202-9074
Seal Retaining Plate

332029074
VR08030300: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-126-8096
Helical Compression Spring Retainer

331268096
190431: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-0289
Helical Compression Spring Seat

331540289
809065: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-002-0032
Plug

330020032
35-21001-0401: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-201-7290
Multiple Angle Bracket

332017290
NN60547P01: RNCC: 3 | RNVC: 2

15 Oct 2002

5340-33-161-2585
Multiple Angle Bracket

331612585
315360: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-33-202-5499
Utility Resilient Mount

332025499
W290684802500: RNCC: 3 | RNVC: 2

13 Aug 2003

5340-33-200-7473
Mechanic Equipment Hardware Kit

332007473
7053.252.0830: RNCC: 3 | RNVC: 2
BMR2143V53: RNCC: 5 | RNVC: 2

6 Mar 2002

5340-33-206-6489
Mounting Bracket

332066489
35-0090-01-01: RNCC: 3 | RNVC: 2

9 Apr 2008

5340-33-189-2361
Headless Straight Rod

331892361
01060220: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-004-2869
Double Angle Bracket

330042869
NN60200G01: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-160-3819
Spring Tension Clip

331603819
79.03.079.189: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-180-6663
Manual Control Lever

331806663
207226: RNCC: 3 | RNVC: 2

25 Jul 1995

5340-33-106-0182
Seal Retaining Plate

331060182
12644-1: RNCC: 3 | RNVC: 2

16 Nov 1996

5340-33-202-6206
Spring Tension Clip

332026206
9673.100.0120: RNCC: 3 | RNVC: 2
1005900296: RNCC: 5 | RNVC: 2
1005900296: RNCC: 5 | RNVC: 2

12 Sep 2003

5340-33-207-6686
Mounting Bracket

332076686
5045410: RNCC: 3 | RNVC: 2
1.150.31.030: RNCC: 5 | RNVC: 2

28 Jul 2009

5340-33-206-4959
Dust And Moisture Seal Protective Cap

332064959
0840324033000: RNCC: 3 | RNVC: 2

7 Feb 2008

5340-33-205-8207
Escutcheon Plate

332058207
098195518AS: RNCC: 3 | RNVC: 2

17 Apr 2007

5340-33-002-4846
Seal Retaining Plate

330024846
212-22204-05-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-154-8450

5340-33-126-0346
Abrazadera Enganche

5340-33-126-1602
Acceso Tapa

5340-33-156-0367

5340-33-155-7832
Double Angle Bracket

331557832
575584: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-208-7774
Runner

332087774
35-94241-0003: RNCC: 3 | RNVC: 2
35-94241-0001: RNCC: 3 | RNVC: 9

21 Feb 2011

5340-33-207-7331
Rod End Clevis

332077331
5040876: RNCC: 3 | RNVC: 2
1.141.71.017: RNCC: 5 | RNVC: 2

23 Sep 2009

5340-33-211-2821
Multiple Angle Bracket

332112821
TP252587: RNCC: 3 | RNVC: 2

8 Aug 2013

5340-33-157-7532
Helical Compression Spring Seat

331577532
544919.95: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-6463
Helical Compression Spring Seat

331556463
544698.61: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-208-4860
Retaining Strap

332084860
J92563751-003: RNCC: 3 | RNVC: 2

21 Jul 2010

5340-33-181-5897
Manual Control Lever

331815897
-01201894: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-201-5873
Dust And Moisture Seal Protective Plug

332015873
894135: RNCC: 3 | RNVC: 2

5 Sep 2002

5340-33-200-8277
Metallic Solid Wheel

332008277
9644.101.0049: RNCC: 3 | RNVC: 2
1005006357: RNCC: 5 | RNVC: 2
1005006357: RNCC: 5 | RNVC: 2

18 Mar 2002

5340-33-106-0506
Manual Control Lever

331060506
2510.002860: RNCC: 3 | RNVC: 2

13 Dec 1996

5340-33-005-0613
Multiple Angle Bracket

330050613
NN60341G01: RNCC: 3 | RNVC: 2

13 Jun 2000

5340-33-207-9592
Mounting Bracket

332079592
40.18.60.0004.0: RNCC: 3 | RNVC: 2

11 Dec 2009

5340-33-107-9187
De E Tapon Fusible

5340-33-204-5592
Utility Resilient Mount

332045592
13.961: RNCC: 3 | RNVC: 2
13.961: RNCC: 5 | RNVC: 2

17 Oct 2005

5340-33-004-7695
Spring Loaded Cylinder Fastener

330047695
-01605453-0: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-33-002-3276
Extension Drawer Slide Section

330023276
117.02.01: RNCC: 3 | RNVC: 2

22 Aug 1994

5340-33-202-6612
Manual Control Lever

332026612
9673.250.0267: RNCC: 3 | RNVC: 2
2510900825: RNCC: 5 | RNVC: 2
2510900825: RNCC: 5 | RNVC: 2

23 Sep 2003

5340-33-158-1095
Dust And Moisture Seal Boot

331581095
532923: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-001-0159
Double Angle Bracket

330010159
35-43129-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-211-0281
Double Angle Bracket

332110281
TP252580: RNCC: 3 | RNVC: 2

5 Jun 2013

5340-33-106-6957
Manual Control Handle

331066957
SE141129302B: RNCC: 3 | RNVC: 2

19 Jan 1999

5340-33-116-1840
Helical Compression Spring Retainer

331161840
1932 076: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-2438
Manual Control Handle

331082438
9644.120.0059: RNCC: 3 | RNVC: 2
2510007031: RNCC: 5 | RNVC: 2
2510007031: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-210-4320
Access Cover

332104320
AU_695_SP: RNCC: 3 | RNVC: 2

2 Oct 2012

5340-33-004-5261
Dust And Moisture Seal Protective Plug

330045261
3040502811: RNCC: 3 | RNVC: 2
33405.028.12: RNCC: 5 | RNVC: 9

14 Jun 1999

5340-33-202-5902
Mounting Actuator Plate

332025902
739109: RNCC: 3 | RNVC: 2

22 Aug 2003

5340-33-208-6900
Turnbuckle

332086900
116I-20: RNCC: 3 | RNVC: 2

13 Dec 2010

5340-33-210-1942
Double Angle Bracket

332101942
2510010190: RNCC: 3 | RNVC: 2
9644.251.5910: RNCC: 5 | RNVC: 2

21 Jun 2012

5340-33-207-6415
Mounting Plate

332076415
R0095826: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-106-8747
Double Angle Bracket

331068747
7356.592.0660: RNCC: 3 | RNVC: 2
2510009226: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-004-5612
Multiple Angle Bracket

330045612
NN50178P01: RNCC: 3 | RNVC: 2

24 Jun 1999

5340-33-108-0429
Spacing Threaded Standoff

331080429
W280475202021: RNCC: 3 | RNVC: 2

11 Dec 2000

5340-33-206-1962
Clip Retainer Plate

332061962
CBD58505P54: RNCC: 3 | RNVC: 2

24 Sep 2007

5340-33-160-7465
Helical Compression Spring Seat

331607465
91.510.311.80: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-205-1473
Spring Tension Clip

332051473
FRC 3325: RNCC: 3 | RNVC: 2

16 May 2006

5340-33-203-8348
Dust And Moisture Seal Protective Cover

332038348
CBD50518G02: RNCC: 3 | RNVC: 2

20 Nov 2004

5340-33-202-7848
Luggage Handle

332027848
1025-901622: RNCC: 3 | RNVC: 2

28 Oct 2003

5340-33-200-0636
No Metalico Tope

332000636
D0931450669: RNCC: 3 | RNVC: 2

1 Oct 2001

5340-33-154-3821
Helical Compression Spring Seat

331543821
544473.95: RNCC: 3 | RNVC: 2
544473.95: RNCC: 3 | RNVC: 2
544473 95: RNCC: 5 | RNVC: 2
544473.61: RNCC: 5 | RNVC: 2

18 Jan 1991

5340-33-207-7225
Access Cover

332077225
5049432: RNCC: 3 | RNVC: 2

16 Sep 2009

5340-33-158-1137
Dust And Moisture Seal Boot

331581137
554545: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-004-6438
Spring Tension Clip

330046438
1217801: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-203-1902
Helical Compression Spring Retainer

332031902
9673.120.0069: RNCC: 3 | RNVC: 2
2590900046: RNCC: 5 | RNVC: 2
2590900046: RNCC: 5 | RNVC: 2

12 Feb 2004

5340-33-202-7723
Double Angle Bracket

332027723
NN60904G01: RNCC: 3 | RNVC: 2

23 Oct 2003

5340-33-154-0282
Helical Compression Spring Seat

331540282
589909: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-001-3404
Spring Holder

330013404
92014635: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-003-2915
Mechanic Equipment Hardware Kit

330032915
221024150: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-156-2193
Double Angle Bracket

331562193
-28825-Y9501: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-205-3377
Guia Interior

332053377
5032501: RNCC: 3 | RNVC: 2
1.128.33.004: RNCC: 5 | RNVC: 2

2 Aug 2006

5340-33-125-7477
Presilla Abrazadera

5340-33-125-7521
Sujecion Brida

5340-33-156-4584
Clip Retainer Plate

331564584
-80590-01L10: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-210-3395
Mounting Bracket

332103395
A10501/270: RNCC: 3 | RNVC: 2

29 Aug 2012

5340-33-108-2304
Metallic Solid Wheel

331082304
9644.101.0171: RNCC: 3 | RNVC: 2
1005900047: RNCC: 5 | RNVC: 2
1005900047: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-003-2904
Mechanic Equipment Hardware Kit

330032904
221024520: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-158-4185
Manual Control Lever

331584185
230212: RNCC: 3 | RNVC: 2
230064: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-210-6185
Webbing Strap

332106185
0229292: RNCC: 3 | RNVC: 2

30 Nov 2012

5340-33-207-0318
Mounting Plate

332070318
INS003024010020507: RNCC: 3 | RNVC: 2

16 Oct 2008

5340-33-157-8151
Double Angle Bracket

331578151
735820: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-4344
Spacing Threaded Standoff

332044344
500006569: RNCC: 3 | RNVC: 2

14 Sep 2005

5340-33-159-9351
Access Cover

331599351
0145.23: RNCC: 3 | RNVC: 2

9 Oct 1995

5340-33-004-7089
Double Angle Bracket

330047089
NN60141P01: RNCC: 3 | RNVC: 2

10 Sep 1999

5340-33-115-9828
Sealing Plug Assembly

331159828
101.087.04.00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-1671
Multiple Angle Bracket

331081671
00.30: RNCC: 3 | RNVC: 2

19 Jan 2001

5340-33-156-2332
Double Angle Bracket

331562332
-63182-G9600: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-211-3807
Multiple Angle Bracket

332113807
INS030233005000000: RNCC: 3 | RNVC: 2

9 Oct 2013

5340-33-210-3997
Angle Bracket

332103997
CAN67205A: RNCC: 3 | RNVC: 2

27 Sep 2012

5340-33-160-3851
Spring Tension Clip

331603851
79.03.081.021: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-9229
Manual Control Handle

331559229
556864: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-207-0148
Mounting Plate

332070148
INS003024010020102: RNCC: 3 | RNVC: 2

10 Oct 2008

5340-33-000-4446
Nut And Bolt Locking Plate

330004446
813592: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-108-5416
Manual Control Lever

331085416
9644.251.9630: RNCC: 3 | RNVC: 2
2510901073: RNCC: 5 | RNVC: 2
2510901073: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-107-4572
Electronic Equipment Hardware Kit

331074572
W290680402600: RNCC: 3 | RNVC: 2

4 Nov 1999

5340-33-201-3948
Multiple Angle Bracket

332013948
A2811255-003: RNCC: 3 | RNVC: 2

5 Jul 2002

5340-33-207-1663
Mounting Bracket

332071663
BOT262: RNCC: 3 | RNVC: 2

12 Dec 2008

5340-33-106-1561
Flush Lock

331061561
-80501-G907OX: RNCC: 3 | RNVC: 2

20 May 1997

5340-33-207-7766
Strap Bolt

332077766
09.02.80: RNCC: 3 | RNVC: 2

9 Oct 2009

5340-33-207-0471
Angle Bracket

332070471
INS003024010020600: RNCC: 3 | RNVC: 2

23 Oct 2008

5340-33-166-0308
Double Angle Bracket

331660308
1710030: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-0436
Helical Compression Spring Seat

332010436
5340001579: RNCC: 3 | RNVC: 2
5340001579: RNCC: 5 | RNVC: 2

24 Apr 2002

5340-33-000-4440
Nut And Bolt Locking Plate

330004440
812119: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-160-7542
Dust And Moisture Seal Protective Cap

331607542
91.506.980: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-206-2935
Headless Grooved Rod

332062935
021.06.01.05: RNCC: 3 | RNVC: 2

29 Oct 2007

5340-33-210-5028
Corrosion Preventive Anode

332105028
ZP-1: RNCC: 3 | RNVC: 2

18 Oct 2012

5340-33-003-1995
Utility Resilient Mount

330031995
SCM420NR60: RNCC: 3 | RNVC: 2
31303003802: RNCC: 5 | RNVC: 2

17 Oct 1996

5340-33-204-8117
Retaining Clip

332048117
2003256: RNCC: 3 | RNVC: 2

2 Feb 2006

5340-33-004-6074
Helical Compression Spring Seat

330046074
0642296: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-33-207-5126
Webbing Strap

332075126
CAAS002050: RNCC: 3 | RNVC: 2

27 May 2009

5340-33-188-7867
Spring Tension Clip

331887867
6.0609.73.2.0301: RNCC: 3 | RNVC: 2

21 Sep 1995

5340-33-203-6764
Utility Resilient Mount

332036764
A.T.P. 420: RNCC: 3 | RNVC: 2

29 Jul 2004

5340-33-155-7849
Double Angle Bracket

331557849
634797: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-001-3921
Double Angle Bracket

330013921
92020336: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-206-7302
Dust And Moisture Seal Protective Cap

332067302
09250-14006: RNCC: 3 | RNVC: 2
09250-14006: RNCC: 5 | RNVC: 2

22 May 2008

5340-33-207-8652
Mounting Bracket

332078652
181131681: RNCC: 3 | RNVC: 2
181131681: RNCC: 5 | RNVC: 2

6 Nov 2009

5340-33-157-2096
Dust And Moisture Seal Protective Cap

331572096
510726: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-5397
Manual Control Lever

331085397
9644.251.9350: RNCC: 3 | RNVC: 2
2510901003: RNCC: 5 | RNVC: 2
2510901003: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-161-2786
Air Inlet-Outlet Frame

331612786
16622: RNCC: 3 | RNVC: 2

31 Jul 1995

5340-33-155-7856
Double Angle Bracket

331557856
754577: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-000-4434
Nut And Bolt Locking Plate

330004434
795330: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-210-5022
Corrosion Preventive Anode

332105022
Z-2.685: RNCC: 3 | RNVC: 2

18 Oct 2012

5340-33-154-7230
Helical Compression Spring Seat

331547230
514708.61: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-156-2691
Headless Grooved Rod

331562691
-28841-G9725: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-6454
Helical Compression Spring Seat

330006454
180147 95: RNCC: 1 | RNVC: 2
180145 95: RNCC: 3 | RNVC: 2
180145.61: RNCC: 6 | RNVC: 9

15 Jun 1988

5340-33-210-7478
Mounting Bracket

332107478
10-11300-0103-52: RNCC: 3 | RNVC: 2

3 Feb 2013

5340-33-210-0609
Webbing Strap

332100609
5700-25 1000: RNCC: 3 | RNVC: 2

18 May 2012

5340-33-004-5251
Dust And Moisture Seal Protective Plug

330045251
1304654: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-201-6134
Double Angle Bracket

332016134
320586: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-33-160-3831
Spring Tension Clip

331603831
79.03.079.011: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-0485
No Metalico Tope

331070485
-01658-00322: RNCC: 3 | RNVC: 2

26 May 1999

5340-33-158-5599
Dust And Moisture Seal Protective Cap

331585599
-01300273-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-2936
Cantonera O Abrazad

332062936
021.01.02: RNCC: 3 | RNVC: 2

29 Oct 2007

5340-33-206-3552
Utility Resilient Mount

332063552
V3CA8030-06: RNCC: 3 | RNVC: 2

26 Nov 2007

5340-33-207-1861
Friction Catch

332071861
CAN66067-04010A: RNCC: 3 | RNVC: 2

9 Jan 2009

5340-33-156-0338

5340-33-125-7991
Union Placa

5340-33-209-5920
Double Angle Bracket

332095920
0738190800: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-33-158-5625
Friction Catch Stud Receptacle

331585625
-01201346-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-210-5697
Double Angle Bracket

332105697
460 190 850: RNCC: 3 | RNVC: 2

21 Nov 2012

5340-33-158-5790
Headless Straight Rod

331585790
-0161049-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-208-1922
Helical Compression Spring Seat

332081922
P15904259A2: RNCC: 3 | RNVC: 2
BT-IL45D2-5240.1: RNCC: 5 | RNVC: 2
BT-IL45D2F-5240.1: RNCC: 5 | RNVC: 2
BT-IL52D2-5240.1: RNCC: 5 | RNVC: 2
BAP15904259A2SE: RNCC: 5 | RNVC: 2
BAP15904259A2FSE: RNCC: 5 | RNVC: 2

24 Mar 2010

5340-33-207-6321
Mounting Bracket

332076321
R0094664: RNCC: 3 | RNVC: 2

16 Jul 2009

5340-33-209-1770
Mounting Bracket

332091770
0750017900: RNCC: 3 | RNVC: 2

11 Jul 2011

5340-33-103-1660
Spring Holder

331031660
1005-004367: RNCC: 3 | RNVC: 2
2424: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-004-7074
Double Angle Bracket

330047074
NN60156: RNCC: 1 | RNVC: 2
NN60156G01: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-33-201-2939
Double Angle Bracket

332012939
GUIASUPI: RNCC: 3 | RNVC: 2

20 Jun 2002

5340-33-211-2820
Double Angle Bracket

332112820
TP252584: RNCC: 3 | RNVC: 2

8 Aug 2013

5340-33-156-2343
Double Angle Bracket

331562343
-25732-Y9500: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-160-7488
Helical Compression Spring Retainer

331607488
91.503.552.80: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-160-2804
Muelle Helico Reten

5340-33-201-2940
Double Angle Bracket

332012940
GUIASUPII: RNCC: 3 | RNVC: 2

20 Jun 2002

5340-33-209-4043
Mechanical Stop

332094043
0722238440: RNCC: 3 | RNVC: 2

1 Dec 2011

5340-33-107-4566
Electronic Equipment Hardware Kit

331074566
W290679202600: RNCC: 3 | RNVC: 2

4 Nov 1999

5340-33-180-6755
Seal Retaining Plate

331806755
217484: RNCC: 3 | RNVC: 2

25 Jul 1995

5340-33-181-6348
Double Angle Bracket

331816348
-01700429-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-208-6896
Manual Control Lever

332086896
C0700122: RNCC: 3 | RNVC: 2

13 Dec 2010

5340-33-210-3760
Access Cover

332103760
1.120.02.12.006: RNCC: 3 | RNVC: 2

26 Sep 2012

5340-33-161-2739
Resilient Mount Plate

331612739
1905930238: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-2002
Acceso Tapa

5340-33-004-3886
Manual Control Lever

330043886
51455-003: RNCC: 3 | RNVC: 2

15 Mar 1999

5340-33-160-3956
Headless Straight Rod

331603956
91.513.625.80: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-7961
Manual Control Handle

330027961
0003936405: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-210-1717
Mounting Bracket

332101717
TOM0409937: RNCC: 3 | RNVC: 2

15 Jun 2012

5340-33-106-1195
Hand Crank

331061195
193118: RNCC: 3 | RNVC: 2

19 Mar 1997

5340-33-001-8901
Extension Drawer Slide

330018901
C-18040-1-0-M-28: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-108-2715
Flush Lock

331082715
9644.251.1720: RNCC: 3 | RNVC: 2
2510901071: RNCC: 5 | RNVC: 2
2510901071: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-209-6899
Corrosion Preventive Anode

332096899
WP2: RNCC: 3 | RNVC: 2
WP2: RNCC: 5 | RNVC: 2

8 Feb 2012

5340-33-201-0106
Helical Compression Spring Seat

332010106
2540900191: RNCC: 3 | RNVC: 2
2540900191: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-155-7862
Double Angle Bracket

331557862
751070: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-004-4938
Manual Control Handle

330044938
01405143-0: RNCC: 3 | RNVC: 2

2 Jun 1999

5340-33-105-7677
Grooved Clamp Coupling Ferrule

331057677
120334: RNCC: 3 | RNVC: 2

4 Sep 1997

5340-33-209-0470
Mounting Bracket

332090470
MAAC011900000000: RNCC: 3 | RNVC: 2

26 May 2011

5340-33-002-1736
Roller

330021736
35-94006-0103: RNCC: 3 | RNVC: 2

12 Jul 1993

5340-33-108-2485
Manual Control Lever

331082485
9644.250.0712: RNCC: 3 | RNVC: 2
2510008142: RNCC: 5 | RNVC: 2
2510008142: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-155-7838
Double Angle Bracket

331557838
738961: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-201-3782
Dust And Moisture Seal Protective Plug

332013782
718415003: RNCC: 3 | RNVC: 2

2 Jul 2002

5340-33-003-2466
Mechanic Equipment Hardware Kit

330032466
221023850: RNCC: 3 | RNVC: 2

13 Feb 1997

5340-33-201-8113
Mechanic Equipment Hardware Kit

332018113
323029: RNCC: 3 | RNVC: 2

25 Oct 2002

5340-33-208-7511
Mounting Plate

332087511
R0113235: RNCC: 3 | RNVC: 2

2 Feb 2011

5340-33-190-2560
Spring Tension Clip

331902560
44318: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-107-7032
Mechanic Equipment Hardware Kit

331077032
7562.252.1700: RNCC: 3 | RNVC: 2
2510700379: RNCC: 5 | RNVC: 2

17 Apr 2000

5340-33-157-8546
Double Angle Bracket

331578546
783570: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-209-7685
Threaded Rod End

332097685
0754050040: RNCC: 3 | RNVC: 2

23 Feb 2012

5340-33-211-4683
Manual Control Lever

332114683
VR03305040: RNCC: 3 | RNVC: 2
VR03305040: RNCC: 3 | RNVC: 2

15 Nov 2013

5340-33-108-4362
Extension Drawer Slide Section

331084362
9644.251.0401: RNCC: 3 | RNVC: 2
2510900295: RNCC: 5 | RNVC: 2
2510900295: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-106-5943
Helical Compression Spring Seat

331065943
98474126: RNCC: 3 | RNVC: 2

4 Sep 1998

5340-33-107-9577
Manual Control Lever

331079577
00.207.09.016: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-33-003-0190
Window Regulator Handle

330030190
000090052400: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-202-5500
Utility Resilient Mount

332025500
W290684802600: RNCC: 3 | RNVC: 2

13 Aug 2003

5340-33-003-8051
Spacing Threaded Standoff

330038051
730091124: RNCC: 3 | RNVC: 2

10 Jun 1998

5340-33-000-4425
Nut And Bolt Locking Plate

330004425
591298: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-209-1970
Protection Bellows

332091970
0661.10.0000.42: RNCC: 3 | RNVC: 2

18 Jul 2011

5340-33-209-4898
Rigid Caster

332094898
0890.03.0000.00: RNCC: 3 | RNVC: 2

2 Jan 2012

5340-33-209-1556
Nonmetallic Solid Wheel

332091556
855-06-08: RNCC: 3 | RNVC: 2

5 Jul 2011

5340-33-200-6423
Double Angle Bracket

332006423
315999: RNCC: 3 | RNVC: 2

14 Feb 2002

5340-33-208-7119
Webbing Strap

332087119
5700-25+2311TR-30 1100/300: RNCC: 3 | RNVC: 2

10 Jan 2011

5340-33-160-7479
Helical Compression Spring Seat

331607479
79.10.009.612: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-9725
Dust And Moisture Seal Protective Plug

332019725
525725008: RNCC: 3 | RNVC: 2
525725008: RNCC: 5 | RNVC: 2

29 Nov 2002

5340-33-004-5566
Seal Retaining Plate

330045566
NN53355P01: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-33-209-1336
Padlock Set

332091336
0751001601: RNCC: 3 | RNVC: 2

21 Jun 2011

5340-33-209-4054
Double Angle Bracket

332094054
0738045800: RNCC: 3 | RNVC: 2

1 Dec 2011

5340-33-153-8936
Manual Control Handle

331538936
682826: RNCC: 3 | RNVC: 2
682826: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-209-8042
Mounting Bracket

332098042
H081 1023: RNCC: 3 | RNVC: 2

7 Mar 2012

5340-33-107-7026
Mechanic Equipment Hardware Kit

331077026
7562.252.1170: RNCC: 3 | RNVC: 2
2510700367: RNCC: 5 | RNVC: 2

17 Apr 2000

5340-33-203-8600
Double Angle Bracket

332038600
NN60913G01: RNCC: 3 | RNVC: 2

11 Dec 2004

5340-33-209-7399
Handwheel

332097399
AU_1272: RNCC: 3 | RNVC: 2

16 Feb 2012

5340-33-004-8768
Instrument Mounting Clamp

330048768
NRN60011P11: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-33-153-8928
Manual Control Handle

331538928
193335: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-108-5108
Spring Tension Clip

331085108
61315197: RNCC: 3 | RNVC: 2

16 Apr 2001

5340-33-155-6465
Helical Compression Spring Seat

331556465
180903.61: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-160-7469
Helical Compression Spring Seat

331607469
91.510.246: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-102-1084
Dust And Moisture Seal Protective Plug

331021084
A-3-1: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-33-200-0952
Dust And Moisture Seal Protective Cap

332000952
7054.292.0160: RNCC: 3 | RNVC: 2
2540700100: RNCC: 5 | RNVC: 2

5 Oct 2001

5340-33-160-6005
Sealing Plug Assembly

331606005
95.600.965: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-209-6202
Section Block Clamp

332096202
0738163200: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-33-102-1273
Hand Crank

331021273
112260-W: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-33-181-6346
Spring Loaded Cylinder Fastener

331816346
-01700410-6: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-209-0111
Mounting Bracket

332090111
AGC028146GLE: RNCC: 3 | RNVC: 2

24 May 2011

5340-33-003-7330
Dust And Moisture Seal Protective Plug

330037330
191734: RNCC: 3 | RNVC: 2
191734: RNCC: 5 | RNVC: 2

5 Jun 1998

5340-33-202-6755
Metalico Tope

332026755
5032277: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-33-201-8098
Mechanic Equipment Hardware Kit

332018098
7055.292.0090: RNCC: 3 | RNVC: 2
2510701468: RNCC: 5 | RNVC: 2

25 Oct 2002

5340-33-201-8035
Double Angle Bracket

332018035
319754: RNCC: 3 | RNVC: 2

25 Oct 2002

5340-33-209-9814
Retaining Band

332099814
CAN68280-01: RNCC: 3 | RNVC: 2

18 Apr 2012

5340-33-209-1227
Angle Bracket

332091227
0750025301: RNCC: 3 | RNVC: 2

16 Jun 2011

5340-33-207-6319
Mounting Bracket

332076319
R0097588: RNCC: 3 | RNVC: 2

16 Jul 2009

5340-33-209-4401
Mounting Plate

332094401
0738061690: RNCC: 3 | RNVC: 2

20 Dec 2011

5340-33-000-4413
Nut And Bolt Locking Plate

330004413
532363: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-107-3021
Spacing Threaded Standoff

331073021
21124318000: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-201-7203
Dust And Moisture Seal Protective Cover

332017203
1025-901415: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-33-004-4870
Dust And Moisture Seal Protective Plug

330044870
166338: RNCC: 3 | RNVC: 2

2 Jun 1999

5340-33-004-2873
Double Angle Bracket

330042873
NN60300G01: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-107-4658
Spring Tension Clip

331074658
7356.252.4340: RNCC: 3 | RNVC: 2
2590001251: RNCC: 5 | RNVC: 2

15 Nov 1999

5340-33-181-6532
Double Angle Bracket

331816532
-02300279-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-207-4328
Webbing Strap

332074328
30947105: RNCC: 3 | RNVC: 2

7 Apr 2009

5340-33-002-9734
Dust And Moisture Seal Protective Cap

330029734
63189017777000: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-105-5589
Multiple Angle Bracket

331055589
755312: RNCC: 3 | RNVC: 2

9 May 1996

5340-33-211-2851
Double Angle Bracket

332112851
TP252582: RNCC: 3 | RNVC: 2

9 Aug 2013

5340-33-003-6571
Dust And Moisture Seal Protective Cap

330036571
192388: RNCC: 3 | RNVC: 2
4139301198: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-206-4970
Angle Bracket

332064970
1359120000: RNCC: 3 | RNVC: 2
135912: RNCC: 5 | RNVC: 2

8 Feb 2008

5340-33-210-4031
Access Cover

332104031
011148000080000: RNCC: 3 | RNVC: 2

27 Sep 2012

5340-33-154-9838
Helical Compression Spring Retainer

331549838
40805.00.2: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-208-3575
Mounting Bracket

332083575
2510900146: RNCC: 3 | RNVC: 2
9644.251.8170: RNCC: 5 | RNVC: 2

22 Apr 2010

5340-33-204-5406
Spacing Threaded Standoff

332045406
703531004: RNCC: 3 | RNVC: 2

10 Oct 2005

5340-33-206-3851
Electronic Equipment Hardware Kit

332063851
8234030: RNCC: 3 | RNVC: 2

12 Dec 2007

5340-33-210-4164
Key Holder

332104164
COD. 423: RNCC: 3 | RNVC: 2

1 Oct 2012

5340-33-203-7064
Line Supporting Strap

332037064
T50R: RNCC: 3 | RNVC: 2

9 Sep 2004

5340-33-000-4436
Nut And Bolt Locking Plate

330004436
809222: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-206-8211
Dust And Moisture Seal Protective Cap-Plug

332068211
M553B2109200: RNCC: 3 | RNVC: 2

7 Jul 2008

5340-33-209-9934
Antipilferage Seal

332099934
NUM.0 UNE37225: RNCC: 2 | RNVC: 2
UNE37225 NUM.0: RNCC: 2 | RNVC: 2

19 Apr 2012

5340-33-157-1685
Headless Grooved Rod

331571685
-03902085-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-126-3426
Helical Compression Spring Seat

331263426
9.990.1.342.001.4: RNCC: 3 | RNVC: 2

4 Nov 1992

5340-33-155-0408
Manual Control Handle

331550408
910178: RNCC: 3 | RNVC: 2

21 Jan 1991

5340-33-106-3007
Runner:

5340-33-203-1104
Sealing Plug Assembly

332031104
GM791105E0: RNCC: 3 | RNVC: 2

30 Jan 2004

5340-33-003-7110
Manual Control Handle

330037110
8619707: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-33-107-8462
Dust And Moisture Seal Protective Plug

331078462
-06902201-0: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-33-202-8444
No Metalico Tope

332028444
89.28.57: RNCC: 3 | RNVC: 2

11 Nov 2003

5340-33-210-5228
Loop Clamp

332105228
M361A2411200: RNCC: 3 | RNVC: 2

23 Oct 2012

5340-33-001-8111
Friction Catch Stud Receptacle

330018111
CAN51030-1: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-33-209-0090
Mounting Plate

332090090
INS003096990150000: RNCC: 3 | RNVC: 2

24 May 2011

5340-33-210-5583
Webbing Strap

332105583
235822: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-33-209-6121
Mounting Bracket

332096121
0770172400: RNCC: 3 | RNVC: 2

20 Jan 2012

5340-33-209-5670
Access Cover

332095670
0738061510: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-33-208-9161
Mounting Plate

332089161
M551A6025200: RNCC: 3 | RNVC: 2

29 Apr 2011

5340-33-204-6010
Caja De Control Rem

332046010
5034487: RNCC: 3 | RNVC: 2

27 Oct 2005

5340-33-200-0765
Multiple Angle Bracket

332000765
7054.252.0329: RNCC: 3 | RNVC: 2
2510701153: RNCC: 5 | RNVC: 2

4 Oct 2001

5340-33-003-2901
Mechanic Equipment Hardware Kit

330032901
221024500: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-201-1379
Electronic Equipment Hardware Kit

332011379
56281294: RNCC: 3 | RNVC: 2

16 May 2002

5340-33-204-3757
Double Angle Bracket

332043757
NN60827P01: RNCC: 3 | RNVC: 2

18 Aug 2005

5340-33-157-8567
Double Angle Bracket

331578567
786891: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-102-5756
Manual Control Handle

331025756
654-H: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-6035
Dust And Moisture Seal Protective Plug

331086035
6419970286: RNCC: 3 | RNVC: 2

30 Apr 2001

5340-33-204-7564
Double Angle Bracket

332047564
5037343: RNCC: 3 | RNVC: 2
1.124.11.049: RNCC: 5 | RNVC: 2

10 Jan 2006

5340-33-207-7579
Snap Hook

332077579
710100: RNCC: 3 | RNVC: 2

2 Oct 2009

5340-33-207-6430
Mounting Bracket

332076430
R0095837: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-205-5800
Dust And Moisture Seal Protective Plug

332055800
FC-12MAS: RNCC: 3 | RNVC: 2

21 Dec 2006

5340-33-003-4397
Hand Carrying Strap Assembly

330034397
SP-00387: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-103-2130
Manual Control Handle

331032130
9225.15.11.40.10: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-9809
Window Regulator Handle

330029809
0142445: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-201-8054
Mechanic Equipment Hardware Kit

332018054
323031: RNCC: 3 | RNVC: 2

25 Oct 2002

5340-33-155-7878
Double Angle Bracket

331557878
784272: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-202-5632
Dust And Moisture Seal Protective Cap-Plug

332025632
95-94064-0801A01: RNCC: 3 | RNVC: 2

19 Aug 2003

5340-33-206-8973
Case Leg

332068973
217ME730032: RNCC: 3 | RNVC: 2

11 Sep 2008

5340-33-207-0137
Mounting Bracket

332070137
T535S1401202: RNCC: 3 | RNVC: 2

10 Oct 2008

5340-33-105-2290
Spring Tension Clip

331052290
-13902036-0: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-207-0009
Protection Bellows

332070009
200232: RNCC: 3 | RNVC: 2

7 Oct 2008

5340-33-158-5584
Dust And Moisture Seal Protective Plug

331585584
-11900524-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-4683
Multiple Angle Bracket

331074683
7356.252.3930: RNCC: 3 | RNVC: 2
2510700295: RNCC: 5 | RNVC: 2

15 Nov 1999

5340-33-210-5582
Mounting Plate

332105582
236901: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-33-115-9514
Sealing Plug Assembly

331159514
000.990.03.00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-5516
Double Angle Bracket

331615516
736208: RNCC: 3 | RNVC: 2
736208: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-204-3097
Nut And Bolt Retainer

332043097
706100307: RNCC: 3 | RNVC: 2

30 Jun 2005

5340-33-000-9718
Dust And Moisture Seal Protective Cap-Plug

330009718
35-15047-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-205-5490
Manual Control Lever

332055490
51988-002: RNCC: 3 | RNVC: 2

15 Dec 2006

5340-33-209-1978
Block Clamp

332091978
0750025950: RNCC: 3 | RNVC: 2

18 Jul 2011

5340-33-180-7671
Double Angle Bracket

331807671
516133: RNCC: 3 | RNVC: 2
516133: RNCC: 6 | RNVC: 9

20 Jul 1995

5340-33-206-2398
Utility Resilient Mount

332062398
D0941311414: RNCC: 3 | RNVC: 2

9 Oct 2007

5340-33-200-4568
Dust And Moisture Seal Protective Cover

332004568
WW 458 973: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-33-208-0898
Mounting Bracket

332080898
235180: RNCC: 3 | RNVC: 2

16 Feb 2010

5340-33-207-6412
Mounting Plate

332076412
R0095827: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-207-6532
Access Cover

332076532
R0094228: RNCC: 3 | RNVC: 2

21 Jul 2009

5340-33-210-5058
Access Cover

332105058
AU_177: RNCC: 3 | RNVC: 2

19 Oct 2012

5340-33-209-9803
Mounting Bracket

332099803
0738063230: RNCC: 3 | RNVC: 2

18 Apr 2012

5340-33-190-2576
Spring Tension Clip

331902576
44311: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-210-1344
Mounting Plate

332101344
GCRM80002A: RNCC: 3 | RNVC: 2

6 Jun 2012

5340-33-202-5580
Seal Retaining Plate

332025580
95-11543-0002: RNCC: 3 | RNVC: 2

19 Aug 2003

5340-33-204-4708
Dust And Moisture Seal Protective Cap

332044708
0850581000200: RNCC: 3 | RNVC: 2

20 Sep 2005

5340-33-202-9234
Orificios Mu Placa

332029234
CBD57500P38: RNCC: 3 | RNVC: 2

1 Dec 2003

5340-33-204-0948
Utility Resilient Mount

332040948
4122 03 030: RNCC: 3 | RNVC: 2

18 Mar 2005

5340-33-107-9340
Dust And Moisture Seal Protective Cap-Plug

331079340
7057.252.0074: RNCC: 3 | RNVC: 2
4730700026: RNCC: 5 | RNVC: 2

26 Sep 2000

5340-33-209-6766
Mending Plate

332096766
0738069810: RNCC: 3 | RNVC: 2

31 Jan 2012

5340-33-209-4053
Hinge Torsion Bar

332094053
0738053100: RNCC: 3 | RNVC: 2

1 Dec 2011

5340-33-208-1475
Loop Clamp

332081475
BB76370: RNCC: 3 | RNVC: 2
M20693B: RNCC: 5 | RNVC: 9

4 Mar 2010

5340-33-207-6803
Bumper

332076803
95-94150-0105: RNCC: 3 | RNVC: 2

4 Aug 2009

5340-33-208-4797
Mounting Plate

332084797
J92563810-404: RNCC: 3 | RNVC: 2

13 Jul 2010

5340-33-116-6637
Spring Holder

331166637
15 D-96: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-209-5570
Access Cover

332095570
0738064000: RNCC: 3 | RNVC: 2

17 Jan 2012

5340-33-000-4443
Nut And Bolt Locking Plate

330004443
813589: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-105-9698
Hand Crank

331059698
1.120.18.02.019: RNCC: 3 | RNVC: 2

21 Sep 1996

5340-33-210-1662
Mounting Bracket

332101662
1040-6200: RNCC: 3 | RNVC: 2

13 Jun 2012

5340-33-107-6957
Spring Holder

331076957
WW 286 244 AR: RNCC: 3 | RNVC: 2
59.14.009: RNCC: 5 | RNVC: 2

3 May 2000

5340-33-209-6347
Mounting Plate

332096347
0738032230: RNCC: 3 | RNVC: 2

24 Jan 2012

5340-33-206-6781
Bumper

332066781
CA41200-08-1: RNCC: 3 | RNVC: 2

21 Apr 2008

5340-33-103-1977
Placa

331031977
2590-000099: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-6275
Mounting Bracket

332066275
291044-1: RNCC: 3 | RNVC: 2

27 Mar 2008

5340-33-206-8625
Bumper

332068625
99.08.128: RNCC: 3 | RNVC: 2

22 Jul 2008

5340-33-102-0316
Manual Control Handle

331020316
2510-000123: RNCC: 3 | RNVC: 2
2510000123: RNCC: 5 | RNVC: 2
411.090.0499: RNCC: 5 | RNVC: 2

2 Jan 1995

5340-33-201-4250
Clip Retainer Plate

332014250
A2810573-001: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-33-209-9541
Mounting Bracket

332099541
D0942511176: RNCC: 3 | RNVC: 2

10 Apr 2012

5340-33-211-1515
Double Angle Bracket

332111515
VR01280010: RNCC: 3 | RNVC: 2
VR01280010: RNCC: 3 | RNVC: 2

1 Jul 2013

5340-33-105-0626
Multiple Angle Bracket

331050626
PCT0032: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-204-3761
Double Angle Bracket

332043761
NN60831P01: RNCC: 3 | RNVC: 2

18 Aug 2005

5340-33-200-5621
Assy O Hoisting Dog

332005621
CBD50507P11: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-33-157-1884
Manual Control Handle

331571884
-12902024-0: RNCC: 3 | RNVC: 2

12 Sep 1995

5340-33-209-1745
Bumper

332091745
SRC1141037-501: RNCC: 3 | RNVC: 2

8 Jul 2011

5340-33-208-5008
Mending Plate

332085008
INS003112990100000: RNCC: 3 | RNVC: 2

28 Jul 2010

5340-33-160-3838
Spring Tension Clip

331603838
79.03.079.226: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-7365
Dust And Moisture Seal Protective Cap-Plug

332077365
MCG 311-04: RNCC: 3 | RNVC: 2

24 Sep 2009

5340-33-103-0799
Trinquete

331030799
1005-001909: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-8964
No Metalico Tope

332048964
09320-12043: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-209-5417
Mounting Bracket

332095417
9743.100.0908: RNCC: 3 | RNVC: 2
5895900039: RNCC: 5 | RNVC: 2

17 Jan 2012

5340-33-209-3409
Extension Handle

332093409
5652: RNCC: 3 | RNVC: 2

4 Nov 2011

5340-33-207-7961
Access Cover

332077961
5043360: RNCC: 3 | RNVC: 2
1.150.11.027: RNCC: 5 | RNVC: 2

20 Oct 2009

5340-33-211-2974
Double Angle Bracket

332112974
TP252639: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-33-209-5109
Webbing Strap

332095109
5021207: RNCC: 3 | RNVC: 2
1.076.91.002: RNCC: 5 | RNVC: 2

16 Jan 2012

5340-33-206-2404
Electronic Equipment Hardware Kit

332062404
765800: RNCC: 3 | RNVC: 2

9 Oct 2007

5340-33-200-1209
Dust And Moisture Seal Protective Plug

332001209
323616: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-155-8632
Helical Compression Spring Seat

331558632
-16184-H8900: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-9860
Angle Bracket

332069860
TP250302: RNCC: 3 | RNVC: 2

3 Oct 2008

5340-33-005-2652
Dust And Moisture Seal Protective Cover

330052652
CA94301-0001: RNCC: 3 | RNVC: 2

20 Mar 2001

5340-33-187-2687
Nonmetallic Solid Wheel

331872687
173/200: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-200-5013
Manual Control Lever

332005013
19516300: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-208-0651
Mounting Bracket

332080651
0751030211: RNCC: 3 | RNVC: 2

8 Feb 2010

5340-33-209-6825
Mounting Bracket

332096825
0854720000600: RNCC: 3 | RNVC: 2

1 Feb 2012

5340-33-206-9891
Double Angle Bracket

332069891
TP251019: RNCC: 3 | RNVC: 2

3 Oct 2008

5340-33-210-5025
Corrosion Preventive Anode

332105025
Z-2.900: RNCC: 3 | RNVC: 2

18 Oct 2012

5340-33-207-0110
Mounting Plate

332070110
727340306-01: RNCC: 3 | RNVC: 2

10 Oct 2008

5340-33-208-6990
Butt Hinge

332086990
242000104-001: RNCC: 3 | RNVC: 2

23 Dec 2010

5340-33-116-3321
Cilindro Suplemento

331163321
2380.090: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-3824
Spring Tension Clip

331603824
26.189.639: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-6681
Utility Access Door

332046681
5037117: RNCC: 3 | RNVC: 2

28 Nov 2005

5340-33-154-9719
Dust And Moisture Seal Protective Cap

331549719
33-168: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-210-5565
Angle Bracket

332105565
188038002-2: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-33-209-1516
Mounting Bracket

332091516
0750010390: RNCC: 3 | RNVC: 2

1 Jul 2011

5340-33-004-5273
Dust And Moisture Seal Protective Plug

330045273
3VD13455: RNCC: 3 | RNVC: 2
11H-13-455-00: RNCC: 5 | RNVC: 2

14 Jun 1999

5340-33-209-0378
Shipping And Storage Container Twistlock

332090378
AGC028315FDL: RNCC: 3 | RNVC: 2

26 May 2011

5340-33-206-6784
Mounting Plate

332066784
CF 204 363: RNCC: 3 | RNVC: 2

21 Apr 2008

5340-33-126-6106
Spring Tension Clip

331266106
C22165-A1000-C917: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-4596
Mechanic Equipment Hardware Kit

331074596
W290687400800: RNCC: 3 | RNVC: 2

15 Nov 1999

5340-33-202-5578
Seal Retaining Plate

332025578
95-11533-0002: RNCC: 3 | RNVC: 2

19 Aug 2003

5340-33-160-2147
Presilla Abrazadera

5340-33-160-2135
Presilla Abrazadera

5340-33-161-0773
Proteccion Manguito

5340-33-211-5701
Utility Resilient Mount

332115701
TS 25-20 (M-6): RNCC: 3 | RNVC: 2

2 Dec 2013

5340-33-004-7016
Multiple Angle Bracket

330047016
NN60159G01: RNCC: 3 | RNVC: 2

3 Sep 1999

5340-33-154-7231
Helical Compression Spring Seat

331547231
544341.61: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-107-8152
Double Angle Bracket

331078152
125243: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-33-201-8935
Utility Resilient Mount

332018935
E1FH-781S01: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-33-209-6205
Double Angle Bracket

332096205
0722166100: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-33-207-0063
Angle Bracket

332070063
INS003024010010102: RNCC: 3 | RNVC: 2

8 Oct 2008

5340-33-160-3014
Acceso Tapa

5340-33-207-9831
Angle Bracket

332079831
42.90.16.0150.0: RNCC: 3 | RNVC: 2

17 Dec 2009

5340-33-187-2693
Nonmetallic Solid Wheel

331872693
12/150: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-002-7204
Parach Goma Banda

330027204
0013352: RNCC: 3 | RNVC: 2
NG0013352: RNCC: 3 | RNVC: 2

26 Jul 1995

5340-33-207-6424
Mounting Plate

332076424
R0096104: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-210-2459
Helical Compression Spring Retainer

332102459
249770223: RNCC: 3 | RNVC: 2
249770223: RNCC: 5 | RNVC: 2

6 Jul 2012

5340-33-210-8085
Spring Holder

332108085
231147200: RNCC: 3 | RNVC: 2

11 Feb 2013

5340-33-205-8190
Escutcheon Plate

332058190
98196382: RNCC: 3 | RNVC: 2

17 Apr 2007

5340-33-003-2491
Mechanic Equipment Hardware Kit

330032491
221022510: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-33-003-2951
Double Angle Bracket

330032951
721024451: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-207-9918
Track Stop

332079918
42.90.16.0009.0: RNCC: 3 | RNVC: 2

22 Dec 2009

Load More Results