What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 31 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 31 of 39

5340-33-181-7263
No Metalico Tope

331817263
-06600661-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-107-7030
Mechanic Equipment Hardware Kit

331077030
7562.252.1690: RNCC: 3 | RNVC: 2
2510700375: RNCC: 5 | RNVC: 2

17 Apr 2000

5340-33-160-7490
Helical Compression Spring Seat

331607490
79.10.004.062: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-210-6418
Angle Bracket

332106418
TP250870: RNCC: 3 | RNVC: 2

4 Dec 2012

5340-33-210-0606
Webbing Strap

332100606
5700-25+5726-25 750/300: RNCC: 3 | RNVC: 2

18 May 2012

5340-33-181-6342
Spring Loaded Cylinder Fastener

331816342
-01700397-6: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-206-7340
Mechanical Stop

332067340
PS-210583: RNCC: 3 | RNVC: 2

22 May 2008

5340-33-203-0865
Utility Resilient Mount

332030865
5218061-60A: RNCC: 3 | RNVC: 2

28 Jan 2004

5340-33-003-2903
Mechanic Equipment Hardware Kit

330032903
221024515: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-201-3628
Dust And Moisture Seal Protective Cap

332013628
0212230213: RNCC: 3 | RNVC: 2
92451001095: RNCC: 5 | RNVC: 2

1 Jul 2002

5340-33-207-2460
Thumb Latch

332072460
9033.T6000: RNCC: 3 | RNVC: 2

29 Jan 2009

5340-33-004-5705
Metalic Parachoques

330045705
212-23500-35-1: RNCC: 3 | RNVC: 2

28 Jun 1999

5340-33-210-3779
Webbing Strap

332103779
1.120.20.03.005: RNCC: 3 | RNVC: 2

26 Sep 2012

5340-33-160-7504
Helical Compression Spring Seat

331607504
77.00.268.948: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-207-4618
Retaining Band

332074618
212-22157-08.4: RNCC: 3 | RNVC: 2

17 Apr 2009

5340-33-000-9831
Bumper Assy

330009831
35-22041-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-207-8161
Mounting Bracket

332078161
R0095635: RNCC: 3 | RNVC: 2

23 Oct 2009

5340-33-004-2260
Helical Compression Spring Seat

330042260
SP-301-M-BR51/20-LEG12B: RNCC: 3 | RNVC: 2

18 Sep 1998

5340-33-209-8871
Rod End Clevis

332098871
332A87-1052-20-MAM-1: RNCC: 3 | RNVC: 2

28 Mar 2012

5340-33-201-4868
Utility Resilient Mount

332014868
3018 133: RNCC: 3 | RNVC: 2

7 Aug 2002

5340-33-005-0578
Double Angle Bracket

330050578
NN50305P01: RNCC: 3 | RNVC: 2

13 Jun 2000

5340-33-107-8696
Luggage Handle

331078696
PCAMI/RP/2400000110: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-33-003-0072
Dust And Moisture Seal Protective Cap

330030072
000058279100: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-210-4318
Access Cover

332104318
AU_386: RNCC: 3 | RNVC: 2

2 Oct 2012

5340-33-207-5027
Bridge Clamp

332075027
D57646: RNCC: 3 | RNVC: 2

18 May 2009

5340-33-106-5705
Dust And Moisture Seal Protective Plug

331065705
1344913: RNCC: 3 | RNVC: 2
1344913: RNCC: 5 | RNVC: 2

9 Jul 1998

5340-33-200-5931
No Metalico Tope

332005931
WW 486 842 AU: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-207-6410
Mounting Plate

332076410
R0094846: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-156-0363

5340-33-156-0330

5340-33-156-0318

5340-33-207-6016
Metal Grille

332076016
DF 410 050 AX: RNCC: 3 | RNVC: 2

9 Jul 2009

5340-33-209-0487
Runner

332090487
AGB116511E15: RNCC: 3 | RNVC: 2

26 May 2011

5340-33-004-6468
Dust And Moisture Seal Protective Cap

330046468
A44313B: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-209-0571
Mounting Bracket

332090571
1025902193: RNCC: 3 | RNVC: 2
9682.102.4300: RNCC: 5 | RNVC: 2

26 May 2011

5340-33-207-2244
Mounting Bracket

332072244
10-A310501-0301: RNCC: 3 | RNVC: 2

22 Jan 2009

5340-33-207-6495
Mounting Bracket

332076495
R0094669: RNCC: 3 | RNVC: 2

21 Jul 2009

5340-33-207-6533
Mounting Bracket

332076533
R0095701: RNCC: 3 | RNVC: 2

21 Jul 2009

5340-33-210-3976
Access Cover

332103976
AZ_027_CS: RNCC: 3 | RNVC: 2

27 Sep 2012

5340-33-207-6437
Mounting Bracket

332076437
R0096737: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-161-2165
Strap Hinge Leaf

331612165
2510-003962: RNCC: 3 | RNVC: 2

28 Jun 1993

5340-33-103-0790
Manual Control Lever

331030790
2510-001016: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-6971
Access Cover

332066971
53201-99221120-01: RNCC: 3 | RNVC: 2

7 May 2008

5340-33-208-7248
Bumper

332087248
115006: RNCC: 3 | RNVC: 2
F90141230072058: RNCC: 5 | RNVC: 2

14 Jan 2011

5340-33-206-6351
Mounting Bracket

332066351
ST2004005: RNCC: 3 | RNVC: 2

1 Apr 2008

5340-33-207-0031
Angle Bracket

332070031
TP251462: RNCC: 3 | RNVC: 2

8 Oct 2008

5340-33-209-5550
Manual Control Lever

332095550
2510007778: RNCC: 3 | RNVC: 2
9644.250.5112: RNCC: 5 | RNVC: 2

17 Jan 2012

5340-33-209-5935
Mounting Bracket

332095935
0738190400: RNCC: 3 | RNVC: 2

19 Jan 2012

5340-33-207-2890
Mechanical Stop

332072890
95-25175-2201: RNCC: 3 | RNVC: 2

19 Feb 2009

5340-33-208-8015
Mounting Plate

332088015
3705-101: RNCC: 3 | RNVC: 2

2 Mar 2011

5340-33-211-5790
Manual Control Lever

332115790
35-21270-0505A01: RNCC: 3 | RNVC: 2

3 Dec 2013

5340-33-005-0600
Clamp - Assy Of Nn6

330050600
NN60102G01: RNCC: 3 | RNVC: 2

13 Jun 2000

5340-33-126-4514
Puente Abrazadera

5340-33-207-6439
Mounting Bracket

332076439
R0097684: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-207-7319
Rod End Connector

332077319
5049167: RNCC: 3 | RNVC: 2

22 Sep 2009

5340-33-209-6228
Mounting Plate

332096228
0750030161: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-33-208-3526
Angle Bracket

332083526
V0AN62PT2A1: RNCC: 3 | RNVC: 2
CA-50/5A-3134: RNCC: 5 | RNVC: 2
BAV0AN62PT2A1SE: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-33-156-0491

5340-33-156-0393

5340-33-156-0329

5340-33-154-0281
Helical Compression Spring Seat

331540281
551929: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-000-4399
Nut And Bolt Locking Plate

330004399
515933: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-001-4471
Malla 20X60x3x3 140

330014471
92026357: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-001-9023
Extension Drawer Slide

330019023
C-18040-1-0-CR-32: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-208-6897
Manual Control Lever

332086897
C0700123: RNCC: 3 | RNVC: 2

13 Dec 2010

5340-33-208-0712
Mounting Bracket

332080712
610CM110004: RNCC: 3 | RNVC: 2

9 Feb 2010

5340-33-201-4673
Double Angle Bracket

332014673
J92666171-001: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-33-204-8951
No Metalico Tope

332048951
09320-08066: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-211-6429
Utility Resilient Mount

332116429
SERIE BAJA 0B: RNCC: 3 | RNVC: 2

24 Dec 2013

5340-33-160-0620
Helical Compression Spring Seat

331600620
00.170.861.00: RNCC: 3 | RNVC: 2

21 Sep 1995

5340-33-209-9012
Loop Clamp

332099012
191.152.321: RNCC: 3 | RNVC: 2
191.152.321: RNCC: 5 | RNVC: 2

30 Mar 2012

5340-33-004-2813
Manual Control Handle

330042813
3M6I26: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-102-9728
Dust And Moisture Seal Protective Cap

331029728
417262: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-7851
Double Angle Bracket

331577851
630501: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-3420
Helical Compression Spring Seat

332003420
05 0006 1101: RNCC: 3 | RNVC: 2

11 Jan 2002

5340-33-156-0292

5340-33-156-0277

5340-33-156-0209

5340-33-160-1841
Union Placa

5340-33-003-6795
Dust And Moisture Seal Protective Cap-Plug

330036795
315492: RNCC: 3 | RNVC: 2
315492: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-125-7520
Sujecion Brida

5340-33-125-7440
Acceso Tapa

5340-33-125-7990
Union Placa

5340-33-125-7987
Union Placa

5340-33-126-0139
Doble Angul Soporte

5340-33-200-9140
Spacing Threaded Standoff

332009140
709033704: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-33-108-2954
Montajes Soporte

5340-33-126-3491
Terminal Horquilla

5340-33-125-7984
Union Placa

5340-33-126-3002
Acceso Tapa

5340-33-000-4438
Nut And Bolt Locking Plate

330004438
811807: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-188-6773
Dust And Moisture Seal Boot

331886773
-90582-G9500: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-211-1513
Window Retaining Plate

332111513
VR01250100: RNCC: 3 | RNVC: 2
VR01250100: RNCC: 3 | RNVC: 2

1 Jul 2013

5340-33-202-6731
Manual Control Lever

332026731
5031575: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-33-208-3959
Pipe Hanger

332083959
32301507: RNCC: 3 | RNVC: 2

7 May 2010

5340-33-002-9161
No Metalico Tope

330029161
6017600329: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-200-3115
Manual Control Lever

332003115
35-25151-0003: RNCC: 3 | RNVC: 2

13 Dec 2001

5340-33-201-3987
Double Angle Bracket

332013987
A2811764-001: RNCC: 3 | RNVC: 2

5 Jul 2002

5340-33-210-6189
Webbing Strap

332106189
0308344: RNCC: 3 | RNVC: 2

30 Nov 2012

5340-33-207-6738
Bow Handle

332076738
115713200: RNCC: 3 | RNVC: 2

3 Aug 2009

5340-33-004-5583
Double Angle Bracket

330045583
NN50037P01: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-33-205-9012
Utility Resilient Mount

332059012
8168038: RNCC: 3 | RNVC: 2

8 May 2007

5340-33-208-6408
Rod End Clevis

332086408
R0107305: RNCC: 3 | RNVC: 2

16 Nov 2010

5340-33-202-6209
Spring Tension Clip

332026209
9673.100.0130: RNCC: 3 | RNVC: 2
1005900297: RNCC: 5 | RNVC: 2
1005900297: RNCC: 5 | RNVC: 2

16 Sep 2003

5340-33-209-4328
Eye Hook

332094328
0738007430: RNCC: 3 | RNVC: 2

20 Dec 2011

5340-33-206-7862
Mounting Plate

332067862
PS-610796: RNCC: 3 | RNVC: 2

20 Jun 2008

5340-33-209-2024
Access Cover

332092024
0750047660: RNCC: 3 | RNVC: 2

19 Jul 2011

5340-33-209-0757
Pad Eye

332090757
AGL155476O00: RNCC: 3 | RNVC: 2

31 May 2011

5340-33-208-8962
Mounting Plate

332088962
H914 9698: RNCC: 3 | RNVC: 2

20 Apr 2011

5340-33-208-6953
Lock Bar

332086953
SMPM-V1-134: RNCC: 3 | RNVC: 2

17 Dec 2010

5340-33-207-1676
Access Cover

332071676
40504020060: RNCC: 3 | RNVC: 2

15 Dec 2008

5340-33-203-5430
Dust And Moisture Seal Protective Cap

332035430
2736.01.34: RNCC: 3 | RNVC: 2
PCAMI/RP/4800027360134: RNCC: 5 | RNVC: 2

19 May 2004

5340-33-103-2148
Grifo Derecho

331032148
9310.10.460134: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-208-4969
Mending Plate

332084969
INS003112990070000: RNCC: 3 | RNVC: 2

27 Jul 2010

5340-33-207-6355
Metal Grille

332076355
110-B: RNCC: 3 | RNVC: 2
10010: RNCC: 3 | RNVC: 2
9999-33-R25-8057: RNCC: 6 | RNVC: 9

17 Jul 2009

5340-33-207-9416
Clamping Catch

332079416
201246280: RNCC: 3 | RNVC: 2
PFE20124628002: RNCC: 5 | RNVC: 2

4 Dec 2009

5340-33-002-7206
No Metalico Tope

330027206
SG13303: RNCC: 3 | RNVC: 2
NGSG13303: RNCC: 3 | RNVC: 2

26 Jul 1995

5340-33-208-4451
Mounting Bracket

332084451
5052247: RNCC: 3 | RNVC: 2

25 Jun 2010

5340-33-180-5541
Strap Hinge Leaf

331805541
138297: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-209-7358
Access Hole Frame

332097358
VR0138010000003: RNCC: 3 | RNVC: 2

15 Feb 2012

5340-33-160-3903
No Metalico Tope

331603903
91.514.198: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-180-6949
Abrazadera Reten

331806949
243873: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-209-4092
Electronic Equipment Hardware Kit

332094092
0738149100: RNCC: 3 | RNVC: 2

2 Dec 2011

5340-33-200-9479
Montajes Placa

5340-33-116-6564
Manual Control Lever

331166564
403.002.000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-209-1327
Multiple Angle Bracket

332091327
0751031111: RNCC: 3 | RNVC: 2

21 Jun 2011

5340-33-209-0754
Mounting Bracket

332090754
AGL095814A00: RNCC: 3 | RNVC: 2

31 May 2011

5340-33-156-3248
Manual Control Handle

331563248
-33219-G9601: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-8960
Manual Control Lever

332068960
235232: RNCC: 3 | RNVC: 2

5 Sep 2008

5340-33-201-6092
Bisagra De Tope

5340-33-126-9731
Union Placa

5340-33-000-4416
Nut And Bolt Locking Plate

330004416
537076: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-002-9515
Dust And Moisture Seal Protective Cap

330029515
6316890290: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-181-8765
Double Angle Bracket

331818765
-14700121-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-210-6017
Access Cover

332106017
TP201097: RNCC: 3 | RNVC: 2

27 Nov 2012

5340-33-203-6840
Crank Locking Device

332036840
2123020310: RNCC: 3 | RNVC: 2

24 Aug 2004

5340-33-210-6188
Webbing Strap

332106188
0308340: RNCC: 3 | RNVC: 2

30 Nov 2012

5340-33-202-5654
Headless Straight Rod

332025654
35-22000-0103: RNCC: 3 | RNVC: 2

19 Aug 2003

5340-33-001-9992
Seal Retaining Plate

330019992
35-21001-0201: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-206-6210
Angle Bracket

332066210
SM2004008: RNCC: 3 | RNVC: 2

26 Mar 2008

5340-33-160-7471
Helical Compression Spring Seat

331607471
97.500.398: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-7520
Dust And Moisture Seal Protective Cap-Plug

332007520
7562.472.0007: RNCC: 3 | RNVC: 2
4730002481: RNCC: 5 | RNVC: 2

6 Mar 2002

5340-33-103-5564
Spring Tension Clip

331035564
W273900348008: RNCC: 3 | RNVC: 2

10 Aug 1994

5340-33-208-0320
Stand Base

332080320
0753041100: RNCC: 3 | RNVC: 2

22 Jan 2010

5340-33-206-6907
Double Angle Bracket

332066907
62029103: RNCC: 3 | RNVC: 2

5 May 2008

5340-33-210-4758
Access Cover

332104758
AU_1107_PZA4: RNCC: 3 | RNVC: 2

9 Oct 2012

5340-33-005-0868
Dust And Moisture Seal Boot

330050868
0750112131R: RNCC: 3 | RNVC: 2

20 Jun 2000

5340-33-200-4996
Spring Tension Clip

332004996
19514119: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-204-2889
Butt Hinge Leaf

332042889
PCAMI/RP/07000000000853: RNCC: 3 | RNVC: 2

10 Jun 2005

5340-33-208-5498
Bumper

332085498
95-94507-0401: RNCC: 3 | RNVC: 2

23 Sep 2010

5340-33-204-6088
Spring Tension Clip

332046088
51752-70B00: RNCC: 3 | RNVC: 2
51752-70B00: RNCC: 5 | RNVC: 2

3 Nov 2005

5340-33-202-9338
Manual Control Handle

332029338
CBD50512P87: RNCC: 3 | RNVC: 2

1 Dec 2003

5340-33-160-7534
Dust And Moisture Seal Protective Cap

331607534
94.01.933.040: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-158-5589
Dust And Moisture Seal Protective Cap

331585589
-01200364: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-0284
Helical Compression Spring Retainer

331540284
740345: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-200-9141
Spacing Threaded Standoff

332009141
709033711: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-33-003-2940
Double Angle Bracket

330032940
721023857: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-207-8280
Bumper

332078280
MCG 11112 BP 160: RNCC: 3 | RNVC: 2

27 Oct 2009

5340-33-208-5607
Manual Control Lever

332085607
R0110985: RNCC: 3 | RNVC: 2

28 Sep 2010

5340-33-207-0202
Mounting Plate

332070202
INS003024010020400: RNCC: 3 | RNVC: 2

14 Oct 2008

5340-33-203-6222
Mounting Actuator Plate

332036222
4859831: RNCC: 2 | RNVC: 2

1 Jul 2004

5340-33-203-7697
Double Angle Bracket

332037697
G788040300: RNCC: 3 | RNVC: 2

28 Sep 2004

5340-33-206-6838
Angle Bracket

332066838
62023203: RNCC: 3 | RNVC: 2

29 Apr 2008

5340-33-155-9193
Manual Control Lever

331559193
313968: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-003-0420
No Metalico Tope

330030420
7700767898: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-190-5562
Sealing Plug Assembly

331905562
K43175080-004: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-209-0092
Mounting Plate

332090092
INS003073990010800: RNCC: 3 | RNVC: 2

24 May 2011

5340-33-115-9709
Double Angle Bracket

331159709
101.181.00.10: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-158-1089
Dust And Moisture Seal Boot

331581089
532645: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-210-2944
Butt Hinge Leaf

332102944
212-13500-18-1: RNCC: 3 | RNVC: 2

24 Jul 2012

5340-33-108-5399
Mounting Actuator Plate

331085399
9644.251.9440: RNCC: 3 | RNVC: 2
2510901009: RNCC: 5 | RNVC: 2
2510901009: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-204-1882
Handwheel

332041882
064.06.01.24.M02: RNCC: 3 | RNVC: 2

28 Apr 2005

5340-33-116-2643
Angular Soporte

5340-33-154-8892

5340-33-154-6092

5340-33-004-8770
Instrument Mounting Clamp

330048770
NRN60011P14: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-33-200-2112
Instrument Mounting Clamp

332002112
J57166368-001: RNCC: 3 | RNVC: 2

5 Nov 2001

5340-33-210-4753
Access Cover

332104753
AU_279: RNCC: 3 | RNVC: 2

9 Oct 2012

5340-33-203-8595
Double Angle Bracket

332038595
NN60876P01: RNCC: 3 | RNVC: 2

11 Dec 2004

5340-33-154-9961
Manual Control Handle

331549961
R000141923: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-206-2683
Nut And Bolt Locking Plate

332062683
7067: RNCC: 3 | RNVC: 2
2950-33-M10-5746: RNCC: 6 | RNVC: 9

18 Oct 2007

5340-33-206-8167
Mounting Bracket

332068167
6702507: RNCC: 3 | RNVC: 2
6702507B: RNCC: 5 | RNVC: 2

4 Jul 2008

5340-33-207-7480
Rigid Caster

332077480
5039357: RNCC: 3 | RNVC: 2
1.141.71.031: RNCC: 5 | RNVC: 2

29 Sep 2009

5340-33-207-0065
Double Angle Bracket

332070065
INS003024010010101: RNCC: 3 | RNVC: 2

8 Oct 2008

5340-33-107-7839
Sealing Plug Assembly

331077839
523-150.12: RNCC: 3 | RNVC: 2

18 May 2000

5340-33-209-1823
Access Cover

332091823
7835013100: RNCC: 3 | RNVC: 2

12 Jul 2011

5340-33-209-8917
Loop Clamp Kit

332098917
BEVARA: RNCC: 3 | RNVC: 2

29 Mar 2012

5340-33-208-4292
Bow Handle

332084292
230925: RNCC: 3 | RNVC: 2

10 Jun 2010

5340-33-207-5150
Mounting Bracket

332075150
7491 22: RNCC: 3 | RNVC: 2

27 May 2009

5340-33-209-0370
Mounting Bracket

332090370
1025902191: RNCC: 3 | RNVC: 2
9682.102.1125: RNCC: 5 | RNVC: 2

26 May 2011

5340-33-206-6122
Mounting Bracket

332066122
CF 328 422 BU: RNCC: 3 | RNVC: 2

17 Mar 2008

5340-33-200-1148
Double Angle Bracket

332001148
7053.252.0054: RNCC: 3 | RNVC: 2
2530700007: RNCC: 5 | RNVC: 2

8 Oct 2001

5340-33-005-0558
Double Angle Bracket

330050558
NN60110P01: RNCC: 3 | RNVC: 2

13 Jun 2000

5340-33-158-4128
Dust And Moisture Seal Boot

331584128
160004: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-3813
Multiple Angle Bracket

331613813
630312: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-106-0476
Manual Control Lever

331060476
47910041: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-33-202-2069
Double Angle Bracket

332022069
NN60665P01: RNCC: 3 | RNVC: 2

25 Feb 2003

5340-33-200-7095
Magnetic Stopper

332007095
IN-050A-MV01I.39: RNCC: 3 | RNVC: 2

1 Mar 2002

5340-33-209-0622
Shipping And Storage Container Twistlock

332090622
AGC028136FTR: RNCC: 3 | RNVC: 2

27 May 2011

5340-33-210-2711
Snap Hook

332102711
AHEGAHO266: RNCC: 3 | RNVC: 2

12 Jul 2012

5340-33-002-9930
No Metalico Tope

330029930
1310948: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-106-3272
No Metalico Tope

331063272
631 317 03 12: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-206-2064
Utility Resilient Mount

332062064
5218124-60B: RNCC: 3 | RNVC: 2

26 Sep 2007

5340-33-000-6446
Helical Compression Spring Seat

330006446
126428 95: RNCC: 1 | RNVC: 2

15 Jun 1988

5340-33-207-6313
Mounting Bracket

332076313
R0096851: RNCC: 3 | RNVC: 2

16 Jul 2009

5340-33-103-2450
Guia Leva Izquierda

331032450
1055-000375: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-0179
Dust And Moisture Seal Protective Cap-Plug

332040179
CBD50520G01: RNCC: 3 | RNVC: 2

2 Feb 2005

5340-33-107-4604
Electronic Equipment Hardware Kit

331074604
W290687402600: RNCC: 3 | RNVC: 2

15 Nov 1999

5340-33-204-4282
Headless Straight Rod

332044282
W280698402011: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-108-2776
No Metalico Tope

331082776
9644.250.6239: RNCC: 3 | RNVC: 2
2540000986: RNCC: 5 | RNVC: 2
2540000986: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-206-7943
Rod End Clevis

332067943
CBD58505G74: RNCC: 3 | RNVC: 2

24 Jun 2008

5340-33-001-0761
Rueda Orie Soporte

330010761
35-46374-0201: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-209-0385
Shipping And Storage Container Twistlock

332090385
AGC028315FTL: RNCC: 3 | RNVC: 2

26 May 2011

5340-33-201-8138
Dust And Moisture Seal Protective Plug

332018138
492.090.0056: RNCC: 3 | RNVC: 2
2510701538: RNCC: 5 | RNVC: 2

25 Oct 2002

5340-33-001-8194
Dust And Moisture Seal Protective Cap

330018194
160101: RNCC: 3 | RNVC: 2

26 Apr 1991

5340-33-209-1884
Mounting Bracket

332091884
M541B1752200: RNCC: 3 | RNVC: 2

14 Jul 2011

5340-33-107-1871
Clip Retainer Plate

331071871
66911-G970X: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-209-7565
Sliding Block

332097565
0853782000700: RNCC: 3 | RNVC: 2

22 Feb 2012

5340-33-209-6236
Mounting Plate

332096236
0750031941: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-33-115-9536
Spring Holder

331159536
6.0690.40.1.0402: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-7226
Helical Compression Spring Seat

331547226
180237.61: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-33-156-0297

5340-33-210-2262
Elastic Strap

332102262
500407859: RNCC: 3 | RNVC: 2

5 Jul 2012

5340-33-207-0046
Mounting Bracket

332070046
TP251729: RNCC: 3 | RNVC: 2

8 Oct 2008

5340-33-000-4439
Nut And Bolt Locking Plate

330004439
812115: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-207-0136
Mounting Bracket

332070136
T535S1401204: RNCC: 3 | RNVC: 2

10 Oct 2008

5340-33-115-8526
Access Cover

331158526
25547: RNCC: 3 | RNVC: 2

18 Sep 1992

5340-33-116-2478
Helical Compression Spring Seat

331162478
425.472.11: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-4431
Nut And Bolt Locking Plate

330004431
649389: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-208-4834
Mounting Plate

332084834
INS003112060080000: RNCC: 3 | RNVC: 2

16 Jul 2010

5340-33-209-8495
Clamping Catch

332098495
500407281: RNCC: 3 | RNVC: 2

20 Mar 2012

5340-33-181-3594
Nut And Bolt Retainer

331813594
-019127-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-204-5487
Dust And Moisture Seal Protective Plug

332045487
D0941411550: RNCC: 3 | RNVC: 2

11 Oct 2005

5340-33-208-0044
Access Hole Frame

332080044
5046336: RNCC: 3 | RNVC: 2

8 Jan 2010

5340-33-181-1112
Nut And Bolt Locking Plate

331811112
-12314-61500: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-207-6250
Bumper

332076250
DF 400 515 AX: RNCC: 3 | RNVC: 2

14 Jul 2009

5340-33-206-7766
Catch Strike

332067766
8724C5: RNCC: 3 | RNVC: 2

17 Jun 2008

5340-33-116-7849
Double Angle Bracket

331167849
00.00748/01: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-187-5222
Dust And Moisture Seal Protective Cap

331875222
303995: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-206-0423
Multiple Angle Bracket

332060423
NN60969P02: RNCC: 3 | RNVC: 2

10 Jul 2007

5340-33-003-2477
Mechanic Equipment Hardware Kit

330032477
221024270: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-33-107-0540
Dust And Moisture Seal Protective Cap-Plug

331070540
SE022128172A: RNCC: 3 | RNVC: 2

26 May 1999

5340-33-200-4246
Spring Tension Clip

332004246
HT6257AA: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-004-5833
Manual Control Handle

330045833
68630-G9691: RNCC: 3 | RNVC: 2

2 Jul 1999

5340-33-000-2036
Dust And Moisture Seal Protective Plug

330002036
100304: RNCC: 1 | RNVC: 2

11 Dec 1986

5340-33-116-3585
Dust And Moisture Seal Protective Cap

331163585
9718.216: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-2397
Manual Control Lever

331082397
9644.250.0210: RNCC: 3 | RNVC: 2
2510006608: RNCC: 5 | RNVC: 2
2510006608: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-002-8968
Sealing Plug Assembly

330028968
1234700393: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-190-2558
Spring Tension Clip

331902558
44316: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-210-8334
Dust And Moisture Seal Protective Cap

332108334
M551B2910204: RNCC: 3 | RNVC: 2

5 Mar 2013

5340-33-002-8139
Window Regulator Handle

330028139
0004479320: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-004-7080
Double Angle Bracket

330047080
NN60302: RNCC: 1 | RNVC: 2
NN60302P01: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-33-209-5599
Manual Control Lever

332095599
0738063250: RNCC: 3 | RNVC: 2

17 Jan 2012

5340-33-126-8112
Dust And Moisture Seal Protective Cap-Plug

331268112
646762: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-33-200-1100
Multiple Angle Bracket

332001100
7063.592.0011: RNCC: 3 | RNVC: 2
2510701190: RNCC: 5 | RNVC: 2

8 Oct 2001

5340-33-203-3391
No Met Parachoques

332033391
5035980: RNCC: 3 | RNVC: 2

3 Mar 2004

5340-33-000-4415
Nut And Bolt Locking Plate

330004415
533366: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-200-4656
Dirt And Liquid Deflector

332004656
WW 497 073 AR: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-33-004-7083
Double Angle Bracket

330047083
NN60323: RNCC: 1 | RNVC: 2
NN60323P01: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-33-211-5898
Dust And Moisture Seal Protective Cap-Plug Set

332115898
175206: RNCC: 3 | RNVC: 2

3 Dec 2013

5340-33-205-4486
Dust And Moisture Seal Protective Cap

332054486
098176350: RNCC: 3 | RNVC: 2

6 Oct 2006

5340-33-209-5528
Strap Hinge

332095528
TMP36M-042: RNCC: 3 | RNVC: 2

17 Jan 2012

5340-33-156-0294

5340-33-156-0380

5340-33-126-1606
Acceso Tapa

5340-33-209-6380
Access Cover

332096380
0750030662: RNCC: 3 | RNVC: 2

24 Jan 2012

5340-33-190-2550
Spring Tension Clip

331902550
44325: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-003-2919
Double Angle Bracket

330032919
721022701: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-210-1336
Multiple Angle Bracket

332101336
GCRM80005A: RNCC: 3 | RNVC: 2

6 Jun 2012

5340-33-200-7479
Mechanic Equipment Hardware Kit

332007479
7053.252.0980: RNCC: 3 | RNVC: 2
2510700567: RNCC: 5 | RNVC: 2

6 Mar 2002

5340-33-106-7410
Butt Hinge Leaf

331067410
5340.000230: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-204-3725
Sealing Plug Assembly

332043725
02620012: RNCC: 3 | RNVC: 2

29 Jul 2005

5340-33-210-6128
Webbing Strap

332106128
0110316: RNCC: 3 | RNVC: 2

30 Nov 2012

5340-33-205-9654
Hand Crank

332059654
T130502: RNCC: 3 | RNVC: 2
07HMIR073: RNCC: 5 | RNVC: 2

4 Jun 2007

5340-33-004-7101
Double Angle Bracket

330047101
NN60096P01: RNCC: 3 | RNVC: 2

10 Sep 1999

5340-33-201-5495
Grooved Clamp Coupling Ferrule

332015495
125143: RNCC: 3 | RNVC: 2

29 Aug 2002

5340-33-003-2476
Mechanic Equipment Hardware Kit

330032476
221024260: RNCC: 3 | RNVC: 2

13 Feb 1997

5340-33-209-1470
Webbing Strap

332091470
R513: RNCC: 3 | RNVC: 2
150.646-300.427: RNCC: 5 | RNVC: 2

29 Jun 2011

5340-33-003-2902
Mechanic Equipment Hardware Kit

330032902
221024510: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-207-6429
Mounting Plate

332076429
R0095716: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-201-8094
Mechanic Equipment Hardware Kit

332018094
7055.252.0610: RNCC: 3 | RNVC: 2
2510701579: RNCC: 5 | RNVC: 2

25 Oct 2002

5340-33-102-1403
Helical Compression Spring Retainer

331021403
70B-620331: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-156-0324

5340-33-156-0400

5340-33-156-0285

5340-33-202-5157
Headless Straight Rod

332025157
MHC2020210: RNCC: 3 | RNVC: 2
MHC1020210: RNCC: 5 | RNVC: 2

29 Jul 2003

5340-33-108-2580
Double Angle Bracket

331082580
9644.251.0197: RNCC: 3 | RNVC: 2
2510009947: RNCC: 5 | RNVC: 2
2510009947: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-203-8341
Dust And Moisture Seal Protective Cover

332038341
CBD50518G01: RNCC: 3 | RNVC: 2

20 Nov 2004

5340-33-002-1549
Double Angle Bracket

330021549
321097: RNCC: 3 | RNVC: 2

1 Jul 1993

5340-33-203-1782
Flush Lock

332031782
9673.250.5262: RNCC: 3 | RNVC: 2
2540900606: RNCC: 5 | RNVC: 2
2540900606: RNCC: 5 | RNVC: 2

11 Feb 2004

5340-33-180-7449
Kit De Piezas Fijac

331807449
346962: RNCC: 3 | RNVC: 2
346962: RNCC: 6 | RNVC: 9

20 Jul 1995

5340-33-205-0734
Spring Tension Clip

332050734
34938-29F10: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-33-206-3973
Extension Drawer Slide

332063973
30383: RNCC: 3 | RNVC: 2
W273900050002: RNCC: 5 | RNVC: 2

18 Dec 2007

5340-33-181-1417
No Metalico Tope

331811417
-57434-G975X: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-103-4541
Brida Superior Mang

331034541
50343: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-126-2694
Dust And Moisture Seal Protective Cap-Plug

331262694
2750.111: RNCC: 3 | RNVC: 2

14 Sep 1995

5340-33-160-3015
Acceso Tapa

5340-33-160-3007
Acceso Tapa

5340-33-160-2814
Sujecion Brida

5340-33-201-7981
No Metalico Tope

332017981
2510002878: RNCC: 3 | RNVC: 2

25 Oct 2002

5340-33-000-0791

5340-33-126-3001
Acceso Tapa

5340-33-000-4444
Nut And Bolt Locking Plate

330004444
813590: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-160-3865
Spring Tension Clip

331603865
26.198.769: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-210-3835
Rod End Connector

332103835
1.120.28.01.019: RNCC: 3 | RNVC: 2

26 Sep 2012

5340-33-210-0605
Webbing Strap

332100605
5700-25+5723-25 600/200: RNCC: 3 | RNVC: 2

18 May 2012

5340-33-207-8027
Mounting Bracket

332078027
105140: RNCC: 3 | RNVC: 2

21 Oct 2009

5340-33-004-8746
Multiple Angle Bracket

330048746
NN60270P01: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-33-160-3889
No Meta Parachoques

331603889
91.516.382: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-9169
Mechanical Stop

332079169
47567: RNCC: 3 | RNVC: 2
5365-33-M04-0851: RNCC: 6 | RNVC: 9

27 Nov 2009

5340-33-001-3582
Spring Holder

330013582
92018207: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-207-6501
Mounting Plate

332076501
R0094667: RNCC: 3 | RNVC: 2

21 Jul 2009

5340-33-206-5407
Packaging Container Fastener

332065407
C-008/N: RNCC: 3 | RNVC: 2

26 Feb 2008

5340-33-105-9664
Double Angle Bracket

331059664
1.120.18.03.010: RNCC: 3 | RNVC: 2

18 Sep 1996

5340-33-209-9087
Mounting Bracket

332099087
1040-1600: RNCC: 3 | RNVC: 2

30 Mar 2012

5340-33-153-8940
Manual Control Handle

331538940
783791: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-206-3828
Parach Goma Banda

332063828
7143750: RNCC: 3 | RNVC: 2

11 Dec 2007

5340-33-210-5029
Corrosion Preventive Anode

332105029
Z-11: RNCC: 3 | RNVC: 2

18 Oct 2012

5340-33-208-5006
Blank Panel

332085006
CF 209 098 - U: RNCC: 3 | RNVC: 2

28 Jul 2010

5340-33-161-6730
Spring Tension Clip

331616730
221407125: RNCC: 3 | RNVC: 2

24 Apr 1995

5340-33-104-6561
Grapa Metalica Rete

331046561
92.360.000.245: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-33-206-9087
Window Regulator Handle

332069087
23518601: RNCC: 3 | RNVC: 2
23518601: RNCC: 6 | RNVC: 9
23508601: RNCC: E | RNVC: 8
23508601: RNCC: E | RNVC: 8

15 Sep 2008

5340-33-207-7604
Loop Clamp

332077604
10302: RNCC: 3 | RNVC: 2

5 Oct 2009

5340-33-156-0276

5340-33-156-0289

5340-33-211-2610
Double Angle Bracket

332112610
TP252586: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-33-158-5571
Dust And Moisture Seal Protective Cap-Plug

331585571
-024362: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-7070
Double Angle Bracket

330047070
NN60117: RNCC: 1 | RNVC: 2
NN60117P01: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-33-004-9588
Multiple Angle Bracket

330049588
NN60275PO1: RNCC: 3 | RNVC: 2

13 Apr 2000

5340-33-002-9870
Dust And Moisture Seal Protective Cap-Plug

330029870
0755709: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-154-7928

5340-33-116-2650
Union Placa

5340-33-156-0286

5340-33-114-4975

5340-33-125-8115
Terminal Conector

5340-33-208-1808
Dust And Moisture Seal Protective Plug

332081808
VM50/26A-6578.1: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-33-156-0389

5340-33-156-0313

5340-33-156-0420

5340-33-209-1851
Escutcheon Plate

332091851
9743.100.0931: RNCC: 3 | RNVC: 2
5895900046: RNCC: 5 | RNVC: 2

13 Jul 2011

5340-33-005-0563
Double Angle Bracket

330050563
NN60195G01: RNCC: 3 | RNVC: 2

13 Jun 2000

5340-33-154-8065

5340-33-181-0740
Accionami Manivela

5340-33-125-7435
Acceso Tapa

5340-33-125-7482
Presilla Abrazadera

5340-33-125-7423
Angular Soporte

5340-33-003-2488
Mechanic Equipment Hardware Kit

330032488
221022370: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-33-103-3841
Dust And Moisture Seal Protective Cap

331033841
261009: RNCC: 3 | RNVC: 2
529527: RNCC: 5 | RNVC: 2
261.009: RNCC: 5 | RNVC: 2

20 Jul 1995

5340-33-114-4963

5340-33-155-8737

5340-33-155-8735

5340-33-126-0164
Acceso Tapa

5340-33-125-9359

5340-33-155-7837
Double Angle Bracket

331557837
312758: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-003-2822
Mechanic Equipment Hardware Kit

330032822
221024930: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-108-0109
Bow Handle

331080109
6317600461: RNCC: 3 | RNVC: 2

23 Nov 2000

5340-33-203-8346
Dust And Moisture Seal Protective Cover

332038346
CBD50518G05: RNCC: 3 | RNVC: 2

20 Nov 2004

5340-33-181-1137
Dust And Moisture Seal Protective Plug

331811137
-16268-86000: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-126-9208
Dust And Moisture Seal Protective Cap-Plug

331269208
20232003-2: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-6272
Mounting Bracket

332066272
291040-1: RNCC: 3 | RNVC: 2

27 Mar 2008

5340-33-202-4997
Utility Resilient Mount

332024997
MR4020: RNCC: 3 | RNVC: 2

23 Jul 2003

5340-33-004-7566
Manual Control Handle

330047566
-08900135-0: RNCC: 3 | RNVC: 2
-60088127-K91: RNCC: 5 | RNVC: 2
08300141-1: RNCC: 5 | RNVC: 2

6 Oct 1999

5340-33-206-6279
Access Cover

332066279
999009012: RNCC: 3 | RNVC: 2
999009012: RNCC: 5 | RNVC: 2

28 Mar 2008

5340-33-004-6174
Dust And Moisture Seal Protective Cap

330046174
7123-728: RNCC: 3 | RNVC: 2
7123-728A: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-201-4858
No Metalico Tope

332014858
-55240-G9801: RNCC: 3 | RNVC: 2

7 Aug 2002

5340-33-106-2071
Dust And Moisture Seal Protective Cover

331062071
1777B4146/3.6.9.10: RNCC: 3 | RNVC: 2

27 Oct 1997

5340-33-181-3070
Multiple Angle Bracket

331813070
-14700117-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-156-2813
Kit Piezas Fijacion

331562813
-03902387-0: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-209-5860
Angle Bracket

332095860
0738238900: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-33-207-6428
Mounting Bracket

332076428
R0095689: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-202-4516
No Metalico Tope

332024516
525648127: RNCC: 3 | RNVC: 2
525648127: RNCC: 5 | RNVC: 2

12 Jun 2003

5340-33-209-9086
Mounting Bracket

332099086
1040-1500: RNCC: 3 | RNVC: 2

30 Mar 2012

5340-33-003-2876
Mechanic Equipment Hardware Kit

330032876
221023450: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-209-5699
Mending Plate

332095699
0738180280: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-33-203-9945
No Metalico Tope

332039945
107 030 616 001: RNCC: 3 | RNVC: 2
H 92061: RNCC: 5 | RNVC: 2

31 Jan 2005

5340-33-180-6821
Kit Bulon Y Muelle

331806821
230279: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-104-7923
Multiple Angle Bracket

331047923
W290676911000: RNCC: 3 | RNVC: 2

26 Sep 1995

5340-33-125-7439
Acceso Tapa

5340-33-209-5454
Access Cover

332095454
0750035331: RNCC: 3 | RNVC: 2

17 Jan 2012

5340-33-106-5839
Dust And Moisture Seal Protective Cap

331065839
631 727 00 46: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-33-155-7835
Double Angle Bracket

331557835
567241: RNCC: 3 | RNVC: 2
567241.90: RNCC: 5 | RNVC: 2

18 Oct 1990

5340-33-181-1173
Spring Tension Clip

331811173
-21476-G9701: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-187-5314
Dust And Moisture Seal Protective Cap

331875314
515966: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-004-8772
Instrument Mounting Clamp

330048772
NRN60011P16: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-33-200-4388
Hand Crank

332004388
WQ 410 364 -T: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-207-7592
Angle Bracket

332077592
5047331: RNCC: 3 | RNVC: 2
1.150.60.400-A: RNCC: 5 | RNVC: 2

5 Oct 2009

5340-33-202-4899
Rodillo

332024899
2.135.146-A: RNCC: 3 | RNVC: 2
5034257: RNCC: 5 | RNVC: 2

15 Jul 2003

5340-33-181-2877
Helical Compression Spring Retainer

331812877
-33817117: RNCC: 3 | RNVC: 2
-71300027-0: RNCC: 3 | RNVC: 2
-71300077-0: RNCC: 3 | RNVC: 2
120783: RNCC: 3 | RNVC: 2
120081: RNCC: 5 | RNVC: 2

20 Jul 1995

5340-33-203-7699
Utility Resilient Mount

332037699
5718013: RNCC: 3 | RNVC: 2

28 Sep 2004

5340-33-190-5565
Sealing Plug Assembly

331905565
K299520: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-156-2197
Double Angle Bracket

331562197
-21744-Y9600: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-205-6039
Escutcheon Plate

332056039
-74914-G9803: RNCC: 3 | RNVC: 2

11 Jan 2007

5340-33-203-6649
Utility Resilient Mount

332036649
293014: RNCC: 3 | RNVC: 2
PCAMI/RP/29C0300002: RNCC: 5 | RNVC: 2

22 Jul 2004

5340-33-209-3854
Mounting Bracket

332093854
0738182600: RNCC: 3 | RNVC: 2

30 Nov 2011

5340-33-205-3066
Spacing Threaded Standoff

332053066
25671-38B00: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-33-160-3268
Manual Control Lever

331603268
1730150: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-2309
Strap Hinge Leaf

331072309
52530000480: RNCC: 3 | RNVC: 2

14 Sep 1999

5340-33-102-0628
Dust And Moisture Seal Protective Cap

331020628
31-1: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-202-7443
Helical Compression Spring Seat

332027443
082717: RNCC: 3 | RNVC: 2

10 Oct 2003

5340-33-210-8682
Dust And Moisture Seal Protective Cap

332108682
M551B2910206: RNCC: 3 | RNVC: 2

11 Mar 2013

5340-33-202-0605
Dust And Moisture Seal Protective Cap

332020605
1025-901434: RNCC: 3 | RNVC: 2

2 Jan 2003

5340-33-209-3714
Angle Bracket

332093714
0738188530: RNCC: 3 | RNVC: 2

29 Nov 2011

5340-33-207-6418
Mounting Plate

332076418
R0094364: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-201-8033
Double Angle Bracket

332018033
319748: RNCC: 3 | RNVC: 2

25 Oct 2002

5340-33-002-8011
Chapa Guia

330028011
0004132687: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-209-6301
Mounting Bracket

332096301
908 079: RNCC: 3 | RNVC: 2

24 Jan 2012

5340-33-000-9871
Lock

330009871
35-22070-3303: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-188-8953
Juego Perno Y Espac

5340-33-203-9962
No Metalico Tope

332039962
107 101 728 001: RNCC: 3 | RNVC: 2
H 27059: RNCC: 5 | RNVC: 2

31 Jan 2005

5340-33-004-4856
Metalico Tope

330044856
208859: RNCC: 3 | RNVC: 2

2 Jun 1999

5340-33-207-3666
Spring Tension Clip

332073666
IB-130-AL-0205: RNCC: 3 | RNVC: 2
IBSUJ00EE167600: RNCC: 5 | RNVC: 2
9999-33-R25-9787: RNCC: 6 | RNVC: 9

16 Mar 2009

5340-33-207-2762
Webbing Strap

332072762
PS-912317: RNCC: 3 | RNVC: 2

17 Feb 2009

5340-33-105-6268
Dust And Moisture Seal Protective Cap

331056268
-26029-Y9526: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-33-210-7643
Dust And Moisture Seal Protective Cover

332107643
1390.1409.00.00: RNCC: 3 | RNVC: 2

5 Feb 2013

5340-33-201-8100
Mechanic Equipment Hardware Kit

332018100
7055.292.0150: RNCC: 3 | RNVC: 2
2510701496: RNCC: 5 | RNVC: 2

25 Oct 2002

5340-33-154-0279
Helical Compression Spring Seat

331540279
125542.95: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-003-7191
Luggage Handle

330037191
02420018: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-33-155-9304
Dust And Moisture Seal Protective Cap

331559304
314397: RNCC: 3 | RNVC: 2
314397: RNCC: 5 | RNVC: 2

4 Jan 1991

5340-33-181-1120
Nut And Bolt Locking Plate

331811120
-22320-G9605: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-002-6567
Hand Crank

330026567
7426 CJT.A: RNCC: 3 | RNVC: 2

15 Jun 1995

5340-33-209-4687
Protection Bellows

332094687
0664.20.1007.10: RNCC: 3 | RNVC: 2

27 Dec 2011

5340-33-206-8185
Catch Strike

332068185
PS-901795: RNCC: 3 | RNVC: 2

7 Jul 2008

5340-33-158-1514
Dust And Moisture Seal Boot

331581514
625464: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-33-161-3604
Cierre

331613604
583801: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-155-1843
Parach Goma Banda

331551843
4475320: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-108-5055
Spring Tension Clip

331085055
16874776: RNCC: 3 | RNVC: 2

16 Apr 2001

5340-33-206-8626
Bow Handle

332068626
AH0147: RNCC: 3 | RNVC: 2

22 Jul 2008

5340-33-200-3111
Blocaje

332003111
35-22070-3303A01: RNCC: 3 | RNVC: 2

13 Dec 2001

5340-33-154-3820
Helical Compression Spring Seat

331543820
544341.95: RNCC: 3 | RNVC: 2
544341.95: RNCC: 3 | RNVC: 2
544341 95: RNCC: 5 | RNVC: 2

18 Jan 1991

5340-33-107-4590
Electronic Equipment Hardware Kit

331074590
W290686400500: RNCC: 3 | RNVC: 2

15 Nov 1999

5340-33-208-1594
Mounting Bracket

332081594
873534: RNCC: 3 | RNVC: 2

10 Mar 2010

5340-33-208-1099
Mounting Bracket

332081099
55410351: RNCC: 3 | RNVC: 2

24 Feb 2010

5340-33-158-5532
Helical Compression Spring Retainer

331585532
-01201172: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-4895
Caja Portafusibles

332024895
2.135.148-A: RNCC: 3 | RNVC: 2
5033591: RNCC: 5 | RNVC: 2

14 Jul 2003

5340-33-154-0292
Helical Compression Spring Seat

331540292
812265: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-107-4553
Electronic Equipment Hardware Kit

331074553
W290677502600: RNCC: 3 | RNVC: 2

4 Nov 1999

5340-33-004-9343
Double Angle Bracket

330049343
NN60288G01: RNCC: 3 | RNVC: 2

6 Mar 2000

5340-33-207-7222
Mending Plate

332077222
5049179: RNCC: 3 | RNVC: 2

16 Sep 2009

5340-33-003-0749
Dust And Moisture Seal Protective Cap-Plug

330030749
01553-05091: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-209-7677
Retaining Strap

332097677
0754010020: RNCC: 3 | RNVC: 2

23 Feb 2012

5340-33-116-8044
Manual Control Handle

331168044
01.00510/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-209-5418
Mounting Plate

332095418
0750020291: RNCC: 3 | RNVC: 2

17 Jan 2012

5340-33-208-3885
Bail Handle

332083885
32301102: RNCC: 3 | RNVC: 2

5 May 2010

5340-33-207-2569
Spring Tension Clip

332072569
4333 711 3302EC: RNCC: 3 | RNVC: 2

5 Feb 2009

5340-33-201-7419
Dust And Moisture Seal Protective Cap

332017419
TOM0511206: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-33-105-0171
Helical Compression Spring Retainer

331050171
-01201114: RNCC: 3 | RNVC: 2

12 Sep 1995

5340-33-200-4181
Dust And Moisture Seal Protective Plug

332004181
W 4098 033: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-207-7275
Bow Handle

332077275
1156 70 101: RNCC: 3 | RNVC: 2
1156 70 101: RNCC: 5 | RNVC: 2

21 Sep 2009

5340-33-207-7494
Turnbuckle

332077494
5008113: RNCC: 3 | RNVC: 2
1.037.71.31: RNCC: 5 | RNVC: 2

29 Sep 2009

5340-33-201-8036
Mechanic Equipment Hardware Kit

332018036
319755: RNCC: 3 | RNVC: 2

25 Oct 2002

5340-33-205-9280
Dust And Moisture Seal Protective Cap

332059280
1025901982: RNCC: 3 | RNVC: 2
9743.100.0601: RNCC: 5 | RNVC: 2

21 May 2007

5340-33-157-5446
Multiple Angle Bracket

331575446
631428: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-4343
Spring Tension Clip

331614343
577449F1: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-204-9751
Utility Resilient Mount

332049751
265418: RNCC: 3 | RNVC: 2
5010557129: RNCC: 5 | RNVC: 2

7 Mar 2006

5340-33-155-7869
Double Angle Bracket

331557869
649983: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-200-1210
Double Angle Bracket

332001210
323666: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-107-4552
Mechanic Equipment Hardware Kit

331074552
W290677501300: RNCC: 3 | RNVC: 2

4 Nov 1999

5340-33-103-7643
Cierre Conjunto

331037643
511B073: RNCC: 3 | RNVC: 2

20 Dec 1994

5340-33-000-2041
Dust And Moisture Seal Protective Plug

330002041
180212: RNCC: 1 | RNVC: 2

11 Dec 1986

5340-33-116-2884
Flush Lock

331162884
105.61: RNCC: 3 | RNVC: 9

27 Jul 1995

5340-33-115-9909
Dust And Moisture Seal Protective Cap-Plug

331159909
000.953.00.00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-9882
Dust And Moisture Seal Protective Plug

332049882
FC-2MAS: RNCC: 3 | RNVC: 2

23 Mar 2006

5340-33-210-4668
Mounting Bracket

332104668
GAEG390000: RNCC: 3 | RNVC: 2
GAEG390000: RNCC: 5 | RNVC: 2

8 Oct 2012

5340-33-208-5897
Angle Bracket

332085897
019648014: RNCC: 3 | RNVC: 2
019648014: RNCC: 5 | RNVC: 2

15 Oct 2010

5340-33-209-0621
Shipping And Storage Container Twistlock

332090621
AGC028136FTL: RNCC: 3 | RNVC: 2

27 May 2011

5340-33-207-0696
Access Cover

332070696
TP200936: RNCC: 3 | RNVC: 2

31 Oct 2008

5340-33-002-8962
Caperuza Respirader

330028962
1152610166: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-108-1824
Multiple Angle Bracket

331081824
7054.252.0930: RNCC: 3 | RNVC: 2
2540700047: RNCC: 5 | RNVC: 2

29 Jan 2001

5340-33-208-0734
Mounting Bracket

332080734
PN09-0017-M030: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-33-209-0482
Runner

332090482
AGB114998B19: RNCC: 3 | RNVC: 2
AGB116510B19: RNCC: 5 | RNVC: 2

26 May 2011

5340-33-000-7747
Hand Crank

330007747
423201000800000: RNCC: 3 | RNVC: 2

1 Dec 1988

5340-33-160-3888
No Metalico Tope

331603888
79.03.073.022: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-9518
Hand Crank

332019518
723591328-01: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-33-205-0740
Spring Holder

332050740
13418-33E00: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-33-206-7952
Clip Retainer Plate

332067952
CBD58505P56: RNCC: 3 | RNVC: 2

25 Jun 2008

5340-33-200-4489
Dust And Moisture Seal Protective Cover

332004489
WW 386 455: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-201-3439
Headless Straight Rod

332013439
10.2217010: RNCC: 3 | RNVC: 2

28 Jun 2002

5340-33-180-7667
Spring Tension Clip

331807667
515927: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-1261
Spring Loaded Cylinder Fastener

332001261
230428: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-204-3754
Double Angle Bracket

332043754
NN60824P01: RNCC: 3 | RNVC: 2

18 Aug 2005

5340-33-206-7951
Mechanical Stop

332067951
CBD58505P81: RNCC: 3 | RNVC: 2

25 Jun 2008

5340-33-108-2365
Manual Control Lever

331082365
0640.120.0204: RNCC: 3 | RNVC: 2
2510005278: RNCC: 5 | RNVC: 2
2510005278: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-108-5288
Double Angle Bracket

331085288
9644.100.0308: RNCC: 3 | RNVC: 2
1005002892: RNCC: 5 | RNVC: 2
1005002892: RNCC: 5 | RNVC: 2

27 Apr 2001

5340-33-210-7745
Utility Resilient Mount

332107745
BRB 65 M10 135423: RNCC: 3 | RNVC: 2
016580: RNCC: 5 | RNVC: 2

7 Feb 2013

5340-33-209-7359
Access Hole Frame

332097359
VR01120100000003: RNCC: 3 | RNVC: 2

15 Feb 2012

5340-33-181-1190
No Metalico Tope

331811190
-20209-G970X: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-003-0581
Window Regulator Handle

330030581
7704001207: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-004-5253
Dust And Moisture Seal Protective Plug

330045253
11128-01M01: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-202-9935
Conjunto Caja

332029935
223551A03-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-160-2134
Presilla Abrazadera

5340-33-160-2009
Acceso Tapa

5340-33-156-2792
Mo Kit Guardapolvos

331562792
-23470-N3300: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-5346
Manual Control Lever

331615346
316399: RNCC: 3 | RNVC: 2
316399: RNCC: 5 | RNVC: 2

20 Jul 1995

Load More Results