What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 30 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 30 of 39

5340-33-002-8306
Fija Chapa

330028306
RF16504700: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-208-0168
Double Angle Bracket

332080168
0753047410: RNCC: 3 | RNVC: 2

13 Jan 2010

5340-33-209-5429
Dust And Moisture Seal Protective Plug

332095429
0750023011: RNCC: 3 | RNVC: 2

17 Jan 2012

5340-33-208-7730
Extension Drawer Slide Section

332087730
35-94241-0004: RNCC: 3 | RNVC: 2
35-94241-0002: RNCC: 3 | RNVC: 9

18 Feb 2011

5340-33-208-4170
Caster Wheel

332084170
32301104: RNCC: 3 | RNVC: 2

31 May 2010

5340-33-181-1419
No Metalico Tope

331811419
-65173-G970X: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-107-4562
Electronic Equipment Hardware Kit

331074562
W290679102600: RNCC: 3 | RNVC: 2

4 Nov 1999

5340-33-004-8199
Multiple Angle Bracket

330048199
NN54557G01: RNCC: 3 | RNVC: 2

22 Nov 1999

5340-33-209-7120
Access Cover

332097120
VRAC990213: RNCC: 3 | RNVC: 2

13 Feb 2012

5340-33-115-7942
Double Angle Bracket

331157942
92210628246: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-115-5762
Tornillo Tuerca Y A

331155762
DIN 933-934-125-M6X20: RNCC: 3 | RNVC: 2

13 Sep 1995

5340-33-200-0361
Multiple Angle Bracket

332000361
7054.592.0013: RNCC: 3 | RNVC: 2
2510701123: RNCC: 5 | RNVC: 2

27 Sep 2001

5340-33-209-6981
Webbing Strap

332096981
9531500: RNCC: 3 | RNVC: 2

8 Feb 2012

5340-33-107-7035
Multiple Angle Bracket

331077035
7562.252.0309: RNCC: 3 | RNVC: 2
2510700640: RNCC: 5 | RNVC: 2

20 Jun 2000

5340-33-207-2161
Mounting Bracket

332072161
10-A310501-0501: RNCC: 3 | RNVC: 2

19 Jan 2009

5340-33-211-4496
Escutcheon Plate

332114496
212-81200-07-1: RNCC: 3 | RNVC: 2

25 Oct 2013

5340-33-116-5527
Access Cover

331165527
12310-ZE2-010: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-209-7447
Access Cover

332097447
0853782300200: RNCC: 3 | RNVC: 2

17 Feb 2012

5340-33-210-4754
Access Cover

332104754
AU_186_AI: RNCC: 3 | RNVC: 2

9 Oct 2012

5340-33-209-9775
Access Cover

332099775
0738005320: RNCC: 3 | RNVC: 2

16 Apr 2012

5340-33-209-4474
Crank Handle

332094474
0663.20.1007.00: RNCC: 3 | RNVC: 2

22 Dec 2011

5340-33-155-0779

5340-33-125-7424
Union Placa

5340-33-127-0018
Muelle Comp Asiento

5340-33-126-9727
Union Placa

5340-33-114-4929

5340-33-207-6423
Mounting Plate

332076423
R0095958: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-204-8950
No Metalico Tope

332048950
17913-29F00: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-154-0286
Helical Compression Spring Seat

331540286
746492: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-209-5652
Access Cover

332095652
2510005333: RNCC: 3 | RNVC: 2
0640.810.0043: RNCC: 5 | RNVC: 2

18 Jan 2012

5340-33-209-5646
Butt Hinge

332095646
0738053590: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-33-206-8712
Mounting Bracket

332068712
F3: RNCC: 3 | RNVC: 2

6 Aug 2008

5340-33-106-2188
No Metalico Tope

331062188
797142: RNCC: 3 | RNVC: 2

27 Oct 1997

5340-33-209-1387
Loop Clamp

332091387
0750040900: RNCC: 3 | RNVC: 2

22 Jun 2011

5340-33-208-8998
Handwheel

332088998
E-100-21.U: RNCC: 3 | RNVC: 2

25 Apr 2011

5340-33-201-6340
Spacing Threaded Standoff

332016340
223591115-02: RNCC: 3 | RNVC: 2

19 Sep 2002

5340-33-004-6446
Spring Tension Clip

330046446
60178000: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-160-3022
Acceso Tapa

5340-33-002-8674
Resbalon

330028674
201357000: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-208-8274
Access Cover

332088274
0750069300: RNCC: 3 | RNVC: 2

11 Mar 2011

5340-33-201-0034
No Metalico Tope

332010034
2520000006: RNCC: 3 | RNVC: 2
2520000006: RNCC: 5 | RNVC: 2

22 Apr 2002

5340-33-207-5619
Double Angle Bracket

332075619
10102-18: RNCC: 3 | RNVC: 2

24 Jun 2009

5340-33-181-1141
Dust And Moisture Seal Protective Cap-Plug

331811141
-30542-C6000: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-207-2006
Mounting Bracket

332072006
GISH04010K: RNCC: 3 | RNVC: 2

14 Jan 2009

5340-33-209-1827
Angle Bracket

332091827
5051719: RNCC: 3 | RNVC: 2

12 Jul 2011

5340-33-104-9731
Dust And Moisture Seal Protective Cap-Plug

331049731
528541: RNCC: 3 | RNVC: 2

12 Sep 1995

5340-33-209-4074
Cover Strip

332094074
DF 405 323 A: RNCC: 3 | RNVC: 2

1 Dec 2011

5340-33-180-7718
P Placa De Montaje

331807718
524515: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-203-8343
Dust And Moisture Seal Protective Cover

332038343
CBD50518G03: RNCC: 3 | RNVC: 2

20 Nov 2004

5340-33-107-4549
Mechanic Equipment Hardware Kit

331074549
W290675500800: RNCC: 3 | RNVC: 2

4 Nov 1999

5340-33-207-2885
Dust And Moisture Seal Protective Plug

332072885
35-33005-0101: RNCC: 2 | RNVC: 2

19 Feb 2009

5340-33-210-0592
Hand Crank

332100592
189222300: RNCC: 3 | RNVC: 2

14 May 2012

5340-33-207-6064
Block Clamp

332076064
0931212901100: RNCC: 3 | RNVC: 2

10 Jul 2009

5340-33-160-2796
Muelle Helico Reten

5340-33-160-2827
Soporte Placa

5340-33-116-2873
Muelle Helico Reten

5340-33-155-1698

5340-33-200-4662
Dirt And Liquid Deflector

332004662
WW 497 130 AR: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-33-206-4127
Double Angle Bracket

332064127
903.102.20: RNCC: 3 | RNVC: 2

28 Dec 2007

5340-33-210-0571
Access Cover

332100571
399083003: RNCC: 3 | RNVC: 2
399083003: RNCC: 5 | RNVC: 2

14 May 2012

5340-33-207-6419
Mounting Plate

332076419
R0097036: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-000-6450
Helical Compression Spring Seat

330006450
126433 95: RNCC: 1 | RNVC: 2

15 Jun 1988

5340-33-209-5672
Access Cover

332095672
0738052390: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-33-107-0175
Dust And Moisture Seal Protective Cap

331070175
O-78-2-04-5: RNCC: 3 | RNVC: 2
PCAMI/RP/0200782045: RNCC: 6 | RNVC: 9

25 May 1999

5340-33-207-2064
Webbing Strap

332072064
235390: RNCC: 3 | RNVC: 2
235323: RNCC: 5 | RNVC: 2

15 Jan 2009

5340-33-209-8307
Snap Hook

332098307
200010: RNCC: 3 | RNVC: 2

12 Mar 2012

5340-33-209-4899
Caster Frame

332094899
0890.03.1000.00: RNCC: 3 | RNVC: 2

2 Jan 2012

5340-33-160-3012
Acceso Tapa

5340-33-204-9995
No Metalico Tope

332049995
09321-10018: RNCC: 3 | RNVC: 2

30 Mar 2006

5340-33-208-9160
Mounting Plate

332089160
M551A6024203: RNCC: 3 | RNVC: 2

29 Apr 2011

5340-33-209-5091
Mounting Bracket

332095091
606ME723002: RNCC: 3 | RNVC: 2

16 Jan 2012

5340-33-211-2601
Double Angle Bracket

332112601
TP220289: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-33-160-7484
Helical Compression Spring Retainer

331607484
79.10.009.493: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-202-8454
Quick Release Plunger

332028454
89.28.64: RNCC: 3 | RNVC: 2

11 Nov 2003

5340-33-211-1998
Dust And Moisture Seal Protective Plug

332111998
212-21227-02-1: RNCC: 3 | RNVC: 2

8 Jul 2013

5340-33-209-3720
Access Cover

332093720
0738140160: RNCC: 3 | RNVC: 2

29 Nov 2011

5340-33-004-5257
Dust And Moisture Seal Protective Plug

330045257
503845: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-209-5673
Access Cover

332095673
0738052410: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-33-108-1704
Manual Control Handle

331081704
TONDIAA60: RNCC: 3 | RNVC: 2

29 Jan 2001

5340-33-201-0470
Spacing Threaded Standoff

332010470
5365000281: RNCC: 3 | RNVC: 2
5365000281: RNCC: 5 | RNVC: 2

24 Apr 2002

5340-33-108-0495
Air Inlet-Outlet Frame

331080495
9644.281.5040: RNCC: 3 | RNVC: 2
2930000555: RNCC: 5 | RNVC: 2
2930000555: RNCC: 5 | RNVC: 2

11 Dec 2000

5340-33-204-3726
Sealing Plug Assembly

332043726
02620008: RNCC: 3 | RNVC: 2

29 Jul 2005

5340-33-208-9049
Manual Control Handle

332089049
E-100-2F: RNCC: 3 | RNVC: 2

26 Apr 2011

5340-33-209-6867
Casement Fastener

332096867
BO033A.31.07: RNCC: 3 | RNVC: 2

3 Feb 2012

5340-33-003-2495
Mechanic Equipment Hardware Kit

330032495
221022720: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-33-107-8023
Mechanic Equipment Hardware Kit

331078023
523-820.00: RNCC: 3 | RNVC: 2

20 Jun 2000

5340-33-209-5453
Access Cover

332095453
0750035391: RNCC: 3 | RNVC: 2

17 Jan 2012

5340-33-107-7477
Multiple Angle Bracket

331077477
W290684071700: RNCC: 3 | RNVC: 2

6 Jun 2000

5340-33-000-4437
Nut And Bolt Locking Plate

330004437
811205: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-211-1182
Manual Control Lever

332111182
0231174: RNCC: 3 | RNVC: 2

16 Jun 2013

5340-33-107-7036
Mechanic Equipment Hardware Kit

331077036
7562.252.1810: RNCC: 3 | RNVC: 2
2510700652: RNCC: 5 | RNVC: 2

17 Apr 2000

5340-33-202-7120
Dust And Moisture Seal Protective Cap-Plug

332027120
9673.250.5788: RNCC: 3 | RNVC: 2
2540901123: RNCC: 5 | RNVC: 2
2540901123: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-202-5703
Utility Resilient Mount

332025703
R4 RED: RNCC: 3 | RNVC: 2

21 Aug 2003

5340-33-209-2758
Utility Resilient Mount

332092758
M18071: RNCC: 3 | RNVC: 2

21 Sep 2011

5340-33-103-7633
Palanca Control Man

331037633
300A071: RNCC: 3 | RNVC: 2

20 Dec 1994

5340-33-209-3748
Mounting Plate

332093748
0738230050: RNCC: 3 | RNVC: 2

29 Nov 2011

5340-33-207-6451
Access Cover

332076451
R0094708: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-207-4951
Dust And Moisture Seal Protective Cover

332074951
32103803: RNCC: 3 | RNVC: 2

7 May 2009

5340-33-207-5290
Sealing Plug Assembly

332075290
1.120.14.02.000: RNCC: 3 | RNVC: 2

2 Jun 2009

5340-33-208-9527
Snap Hook

332089527
TKAR9999B163YCH: RNCC: 3 | RNVC: 2

18 May 2011

5340-33-200-4575
No Metalico Tope

332004575
WW 486 692: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-33-206-6214
Mounting Bracket

332066214
SM2004013: RNCC: 3 | RNVC: 2

26 Mar 2008

5340-33-115-9710
Multiple Angle Bracket

331159710
101.181.07.00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-2900
Mechanic Equipment Hardware Kit

330032900
221023975: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-211-0198
Dust And Moisture Seal Protective Plug

332110198
0860169002000: RNCC: 3 | RNVC: 2

16 May 2013

5340-33-187-2697
Nonmetallic Solid Wheel

331872697
62X20: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-102-0679
Dust And Moisture Seal Protective Cap

331020679
16-2: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-207-0124
Mounting Bracket

332070124
980546: RNCC: 3 | RNVC: 2

10 Oct 2008

5340-33-107-4775
Manual Control Lever

331074775
43 801 383: RNCC: 3 | RNVC: 2
2510010748: RNCC: 5 | RNVC: 2
2510010748: RNCC: 5 | RNVC: 2

11 Nov 1999

5340-33-202-8745
Seal Retaining Plate

332028745
VR09120000: RNCC: 3 | RNVC: 2

17 Nov 2003

5340-33-157-8041
Double Angle Bracket

331578041
699404: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-9736
Dust And Moisture Seal Protective Cover

332049736
0224642: RNCC: 3 | RNVC: 2

6 Mar 2006

5340-33-204-4905
No Metalico Tope

332044905
730135124: RNCC: 3 | RNVC: 2

22 Sep 2005

5340-33-208-4438
Hasp Staple

332084438
5049583: RNCC: 3 | RNVC: 2

25 Jun 2010

5340-33-208-6399
Mounting Plate

332086399
R0114098: RNCC: 3 | RNVC: 2

12 Nov 2010

5340-33-107-1865
Antipilferage Seal Locking Wire

331071865
2220411: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-155-7855
Double Angle Bracket

331557855
576062: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-106-0831
Helical Compression Spring Seat

331060831
24.341: RNCC: 3 | RNVC: 2

20 Feb 1997

5340-33-116-2283
Manual Control Handle

331162283
3058D.01960: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-005-0608
Multiple Angle Bracket

330050608
NN60268P02: RNCC: 3 | RNVC: 2

13 Jun 2000

5340-33-001-2550
Dust And Moisture Seal Protective Cap-Plug

330012550
CA41200-07-1: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-102-2956
Hand Crank

331022956
T976-B-10: RNCC: 3 | RNVC: 2

11 Jan 1991

5340-33-211-4089
Double Angle Bracket

332114089
62022104: RNCC: 3 | RNVC: 2

23 Oct 2013

5340-33-161-1329
Helical Compression Spring Seat

331611329
05.215.490.00: RNCC: 3 | RNVC: 2

21 Sep 1995

5340-33-202-9218
Orificios Mu Placa

332029218
CBD57500P63: RNCC: 3 | RNVC: 2

1 Dec 2003

5340-33-201-2285
Flush Lock

332012285
2736.02.17: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-209-8933
Double Angle Bracket

332098933
0751040531: RNCC: 3 | RNVC: 2

29 Mar 2012

5340-33-102-3930
Hand Crank

331023930
42320100080: RNCC: 3 | RNVC: 2
MBL-1-3-800: RNCC: 3 | RNVC: 2
MBL1-3-800: RNCC: 3 | RNVC: 2
42320100080: RNCC: 3 | RNVC: 2
MBL-1-3-800: RNCC: 3 | RNVC: 2
MBL1-3-800: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-005-1307
Dust And Moisture Seal Protective Cap-Plug

330051307
114320615: RNCC: 3 | RNVC: 2

14 Sep 2000

5340-33-181-1189
No Metalico Tope

331811189
-16548-C0300: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-208-1253
Protection Bellows

332081253
702-16-53190: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-33-207-0977
Strap Hinge

332070977
T991S5006123: RNCC: 3 | RNVC: 2

7 Nov 2008

5340-33-209-6795
Mending Plate

332096795
0738060840: RNCC: 3 | RNVC: 2

31 Jan 2012

5340-33-105-5385
Dust And Moisture Seal Protective Plug

331055385
-66820-C6000: RNCC: 3 | RNVC: 2

9 May 1996

5340-33-209-8466
Snap Hook

332098466
191-140: RNCC: 3 | RNVC: 2

15 Mar 2012

5340-33-208-7110
Webbing Strap

332087110
235-HK3-50+2311VTR-50 1600/800: RNCC: 3 | RNVC: 2

10 Jan 2011

5340-33-106-8189
Multiple Angle Bracket

331068189
2510700086: RNCC: 3 | RNVC: 2
7356.252.4450: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-207-4937
Mounting Bracket

332074937
D57645: RNCC: 3 | RNVC: 2

5 May 2009

5340-33-206-9382
Door Handle

332069382
235210: RNCC: 3 | RNVC: 2
980620: RNCC: 5 | RNVC: 2

23 Sep 2008

5340-33-210-6302
Mounting Bracket

332106302
235809: RNCC: 3 | RNVC: 2

2 Dec 2012

5340-33-208-6327
Loop Clamp

332086327
1025902374: RNCC: 3 | RNVC: 2
9682.102.0650: RNCC: 5 | RNVC: 2

10 Nov 2010

5340-33-209-1716
Access Cover

332091716
0750018750: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-33-200-2027
Strap Hinge Leaf

332002027
J57167786-001: RNCC: 3 | RNVC: 2

5 Nov 2001

5340-33-203-3401
Metali Parachoques

332033401
5032820: RNCC: 3 | RNVC: 2

3 Mar 2004

5340-33-207-6558
Mounting Bracket

332076558
R0082374: RNCC: 3 | RNVC: 2

23 Jul 2009

5340-33-201-1376
Electronic Equipment Hardware Kit

332011376
5605730A: RNCC: 3 | RNVC: 2

16 May 2002

5340-33-106-4554
Helical Compression Spring Seat

331064554
-44082-U9200: RNCC: 3 | RNVC: 2

9 Feb 1998

5340-33-211-2822
Multiple Angle Bracket

332112822
TP252341: RNCC: 3 | RNVC: 2

8 Aug 2013

5340-33-155-8979
Double Angle Bracket

331558979
313851: RNCC: 3 | RNVC: 2
5340001092: RNCC: 3 | RNVC: 2
313851: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-000-6456
Helical Compression Spring Seat

330006456
180902 95: RNCC: 1 | RNVC: 2
180902 95: RNCC: 3 | RNVC: 2
180902.61: RNCC: 5 | RNVC: 2

15 Jun 1988

5340-33-205-9669
Manual Control Handle

332059669
0850 402 00: RNCC: 3 | RNVC: 2

4 Jun 2007

5340-33-001-1899
Instrument Mounting Clamp

330011899
35-65116-0601: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-210-2915
Rod End Clevis

332102915
M361A1412000: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-33-116-3324
Platina Tope Eje Le

331163324
6275.057: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-208-3708
Dust And Moisture Seal Protective Cap-Plug Set

332083708
XX-L-SUU20F5.014: RNCC: 3 | RNVC: 2
FMA-09-SUU20F5-014: RNCC: 5 | RNVC: 2

26 Apr 2010

5340-33-209-6783
Access Cover

332096783
AU_027_SP: RNCC: 3 | RNVC: 2

31 Jan 2012

5340-33-160-2821
Sujecion Brida

5340-33-180-6669
Strap Hinge Leaf

331806669
207432: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-208-1673
Mounting Plate

332081673
INS003073990040000: RNCC: 3 | RNVC: 2

12 Mar 2010

5340-33-208-5600
Manual Control Lever

332085600
R0110793: RNCC: 3 | RNVC: 2

28 Sep 2010

5340-33-207-6317
Mounting Bracket

332076317
R0095237: RNCC: 3 | RNVC: 2

16 Jul 2009

5340-33-000-4397
Nut And Bolt Locking Plate

330004397
5340001030: RNCC: 3 | RNVC: 2
315890: RNCC: 3 | RNVC: 2
315890: RNCC: 3 | RNVC: 2

28 Dec 1987

5340-33-206-7399
Bumper

332067399
29334-60A00: RNCC: 3 | RNVC: 2
29334-60A00: RNCC: 5 | RNVC: 2

23 May 2008

5340-33-209-1607
Double Angle Bracket

332091607
INS003002010080000: RNCC: 3 | RNVC: 2

6 Jul 2011

5340-33-108-5455
Extension Drawer Slide

331085455
0639.250.4759: RNCC: 3 | RNVC: 2
2540000586: RNCC: 5 | RNVC: 2
2540000586: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-004-5269
Pol Protector Tapon

5340-33-181-1893
Double Angle Bracket

331811893
-08100141-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-003-2896
Mechanic Equipment Hardware Kit

330032896
221023950: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-161-6686
Helical Compression Spring Retainer

331616686
975-A-12: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-207-7330
Angle Bracket

332077330
A2812124-401: RNCC: 3 | RNVC: 2

22 Sep 2009

5340-33-115-6046
Helical Compression Spring Retainer

331156046
92095902120: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-33-181-0162
Double Angle Bracket

331810162
-25235-N8500: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-209-2001
Protection Bellows

332092001
0750029391: RNCC: 3 | RNVC: 2

18 Jul 2011

5340-33-209-8471
Mounting Plate

332098471
0861101730: RNCC: 3 | RNVC: 2

15 Mar 2012

5340-33-207-2346
Catch Strike

332072346
235901: RNCC: 3 | RNVC: 2

26 Jan 2009

5340-33-207-0693
Access Cover

332070693
TP200597: RNCC: 3 | RNVC: 2

31 Oct 2008

5340-33-210-6297
Mounting Plate

332106297
19625000: RNCC: 3 | RNVC: 2

2 Dec 2012

5340-33-201-7702
Double Angle Bracket

332017702
7055.252.0059: RNCC: 3 | RNVC: 2
2540700144: RNCC: 5 | RNVC: 2

22 Oct 2002

5340-33-210-4752
Access Cover

332104752
AU_320: RNCC: 3 | RNVC: 2

9 Oct 2012

5340-33-209-6219
Mounting Bracket

332096219
0770161100: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-33-211-4743
Utility Resilient Mount

332114743
TOM0203202P07: RNCC: 3 | RNVC: 2
TOM0203202P07: RNCC: 3 | RNVC: 2

16 Nov 2013

5340-33-206-9541
Turnbuckle

332069541
101: RNCC: 3 | RNVC: 2

25 Sep 2008

5340-33-200-1235
Shipping Container Bracket

332001235
324204: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-208-0802
Mounting Bracket

332080802
95-64327-0201: RNCC: 3 | RNVC: 2

15 Feb 2010

5340-33-154-6090
Helical Compression Spring Seat

331546090
4010777: RNCC: 3 | RNVC: 2
584778: RNCC: 3 | RNVC: 2
584778: RNCC: 3 | RNVC: 2

1 Dec 1989

5340-33-103-2432
Helical Compression Spring Retainer

331032432
1055-000347: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-9818
Seal Retaining Plate

330009818
35-22000-0301: RNCC: 3 | RNVC: 2
35-22000-0301: RNCC: 5 | RNVC: 2

23 Oct 1989

5340-33-126-3004
Acceso Tapa

5340-33-126-3003
Acceso Tapa

5340-33-126-2997
Acceso Tapa

5340-33-126-1611
Acceso Tapa

5340-33-206-6259
Mounting Bracket

332066259
SM2004022: RNCC: 3 | RNVC: 2

27 Mar 2008

5340-33-001-3492
Double Angle Bracket

330013492
92016009: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-003-0572
Retaining Clip

330030572
7703081013: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-207-7226
Access Cover

332077226
5049439: RNCC: 3 | RNVC: 2

16 Sep 2009

5340-33-207-0695
Access Cover

332070695
TP200599: RNCC: 3 | RNVC: 2

31 Oct 2008

5340-33-201-5753
Dust And Moisture Seal Protective Cap

332015753
210526: RNCC: 3 | RNVC: 2

4 Sep 2002

5340-33-207-0143
Double Angle Bracket

332070143
INS003024010010700: RNCC: 3 | RNVC: 2

10 Oct 2008

5340-33-207-9380
Mounting Plate

332079380
220476: RNCC: 3 | RNVC: 2

4 Dec 2009

5340-33-210-0582
Rim Lock Set

332100582
3910: RNCC: 3 | RNVC: 1

14 May 2012

5340-33-209-2881
Dust And Moisture Seal Protective Cap

332092881
5048834: RNCC: 3 | RNVC: 2

22 Sep 2011

5340-33-116-5779
Assembled Nut Retainer

331165779
28443-ZE1-003: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-181-1140
Dust And Moisture Seal Protective Cap-Plug

331811140
-21320-D9700: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-103-7640
Soporte Equipado

331037640
242B160: RNCC: 3 | RNVC: 2

20 Dec 1994

5340-33-190-2551
Spring Tension Clip

331902551
44326: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-106-1373
No Metalico Tope

331061373
631 885 01 98: RNCC: 3 | RNVC: 2

7 Apr 1997

5340-33-000-4410
Nut And Bolt Locking Plate

330004410
528709: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-153-8935
Manual Control Handle

331538935
631020: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-200-7478
Mechanic Equipment Hardware Kit

332007478
7053.252.0970: RNCC: 3 | RNVC: 2
2590700004: RNCC: 5 | RNVC: 2

6 Mar 2002

5340-33-158-5574
Dust And Moisture Seal Protective Cap-Plug

331585574
-024132: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-209-8467
Snap Hook

332098467
191-160: RNCC: 3 | RNVC: 2

15 Mar 2012

5340-33-160-1863
Angular Soporte

5340-33-156-0181

5340-33-156-0173

5340-33-156-0167

5340-33-206-7234
Mounting Plate

332067234
D0922511099: RNCC: 3 | RNVC: 2

20 May 2008

5340-33-208-6083
Catch Strike

332086083
47417I01: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-33-207-6433
Mounting Plate

332076433
R0096130: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-160-6404
Manual Control Handle

331606404
95.601.185: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-210-5432
Expansion Shield

332105432
TACOP09: RNCC: 3 | RNVC: 2
8423533064103: RNCC: 5 | RNVC: 2

6 Nov 2012

5340-33-204-1358
Pletina Guia

332041358
064.01.06.M02: RNCC: 3 | RNVC: 2

7 Apr 2005

5340-33-105-2712
Dust And Moisture Seal Boot

331052712
-077025: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-209-4052
Hinge Torsion Bar

332094052
0738057400: RNCC: 3 | RNVC: 2

1 Dec 2011

5340-33-156-0382

5340-33-156-0267

5340-33-156-0275

5340-33-207-6404
Mounting Plate

332076404
R0095385: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-210-4190
Mounting Plate

332104190
64020030: RNCC: 3 | RNVC: 2

1 Oct 2012

5340-33-210-7642
Dust And Moisture Seal Protective Cover

332107642
4300-2096-501: RNCC: 3 | RNVC: 2

5 Feb 2013

5340-33-207-6008
Angle Bracket

332076008
0754022000: RNCC: 3 | RNVC: 2

9 Jul 2009

5340-33-204-6960
Strap Hinge Leaf

332046960
DF 404 696 AE: RNCC: 3 | RNVC: 2

12 Dec 2005

5340-33-160-2811
Sujecion Brida

5340-33-126-9953
Union Placa

5340-33-126-3866

5340-33-126-9796
Presilla Abrazadera

5340-33-004-5270
Dust And Moisture Seal Protective Plug

330045270
007604018101: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-000-4445
Nut And Bolt Locking Plate

330004445
813591: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-200-8006
Multiple Angle Bracket

332008006
315583: RNCC: 3 | RNVC: 2

12 Mar 2002

5340-33-004-8198
Multiple Angle Bracket

330048198
NN54553P01: RNCC: 3 | RNVC: 2

22 Nov 1999

5340-33-209-7597
Runner

332097597
A01000700: RNCC: 3 | RNVC: 2

22 Feb 2012

5340-33-155-2010
Puntal De Correa

331552010
1000-22: RNCC: 3 | RNVC: 2

21 Jan 1991

5340-33-206-7337
Mechanical Stop

332067337
PS-810072: RNCC: 3 | RNVC: 2

22 May 2008

5340-33-103-2290
Threaded Hinged Standoff

331032290
1055-000547: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-6444
Helical Compression Spring Seat

330006444
125544.95: RNCC: 1 | RNVC: 2

15 Jun 1988

5340-33-209-6256
Angle Bracket

332096256
0750033902: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-33-208-4358
Filler Opening Cap

332084358
VTAPON3/8L3: RNCC: 3 | RNVC: 2
MN 32/200 6511: RNCC: 5 | RNVC: 2
BAVTAPON3/8L3SE: RNCC: 5 | RNVC: 2

17 Jun 2010

5340-33-204-1742
Bumper

332041742
064.06.10: RNCC: 3 | RNVC: 2

22 Apr 2005

5340-33-004-5183
Multiple Angle Bracket

330045183
755310: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-209-3383
Mounting Plate

332093383
MAM-XFRE-03-00-11: RNCC: 3 | RNVC: 2

31 Oct 2011

5340-33-209-5518
Lock-Release Lever

332095518
0738102100: RNCC: 3 | RNVC: 2

17 Jan 2012

5340-33-206-6212
Mounting Bracket

332066212
SM2004010: RNCC: 3 | RNVC: 2

26 Mar 2008

5340-33-157-7476
Double Angle Bracket

331577476
532370: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-7873
Double Angle Bracket

331557873
642337: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-106-8644
Dust And Moisture Seal Protective Plug

331068644
4730002476: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-181-1121
Nut And Bolt Locking Plate

331811121
-24210-89944: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-208-7656
Bumper

332087656
1371.05.2000.03: RNCC: 3 | RNVC: 2

14 Feb 2011

5340-33-001-6556
Manual Control Handle

330016556
D48989-00: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-209-6261
Bumper

332096261
0750033281: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-33-201-6093
Bisagra De Tope

5340-33-107-0318
Double Angle Bracket

331070318
9072923: RNCC: 3 | RNVC: 2

25 May 1999

5340-33-205-3917
Utility Resilient Mount

332053917
BRB 110 C60 M16 135333: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-33-003-6588
Dust And Moisture Seal Protective Cap

330036588
196161: RNCC: 3 | RNVC: 2
4139310216: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-208-9142
Dust And Moisture Seal Protective Cap

332089142
0750069411: RNCC: 3 | RNVC: 2

29 Apr 2011

5340-33-209-5937
Multiple Angle Bracket

332095937
0738189100: RNCC: 3 | RNVC: 2

19 Jan 2012

5340-33-160-5931
Seal Retaining Plate

331605931
79.10.006.668: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-8424
Bumper

332068424
09320-06006: RNCC: 3 | RNVC: 2
09320-06006: RNCC: 5 | RNVC: 2

17 Jul 2008

5340-33-102-3025
Dust And Moisture Seal Protective Cap-Plug

331023025
976-B-14: RNCC: 3 | RNVC: 2

11 Jan 1991

5340-33-208-3888
Dust And Moisture Seal Protective Cover

332083888
32301211: RNCC: 3 | RNVC: 2

5 May 2010

5340-33-206-9550
Filler Opening Cap

332069550
IBDEFDISCO21X10: RNCC: 3 | RNVC: 2

26 Sep 2008

5340-33-145-5769
Spring Tension Clip

331455769
83-009: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-5128
Mounting Plate

332065128
0555010140: RNCC: 3 | RNVC: 2

12 Feb 2008

5340-33-105-5571
Dust And Moisture Seal Boot

331055571
180291: RNCC: 3 | RNVC: 2

8 May 1996

5340-33-210-4757
Access Cover

332104757
AU_131: RNCC: 3 | RNVC: 2

9 Oct 2012

5340-33-206-0886
Air Inlet-Outlet Frame

332060886
76818 11H00: RNCC: 3 | RNVC: 2
76818-11H00: RNCC: 5 | RNVC: 2

31 Jul 2007

5340-33-200-7483
Mechanic Equipment Hardware Kit

332007483
7356.252.3430: RNCC: 3 | RNVC: 2
BMR2145: RNCC: 5 | RNVC: 2

6 Mar 2002

5340-33-207-0540
Window Regulator Handle

332070540
92491040009: RNCC: 3 | RNVC: 2

28 Oct 2008

5340-33-210-5059
Access Cover

332105059
AU_515_AI: RNCC: 3 | RNVC: 2

19 Oct 2012

5340-33-206-8711
Mounting Bracket

332068711
A1: RNCC: 3 | RNVC: 2

6 Aug 2008

5340-33-126-4214
Double Angle Bracket

331264214
C22234-N1000-C25: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-103-0791
Manual Control Lever

331030791
2510-001021: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-0506
Manual Control Handle

332070506
9170 9233 00: RNCC: 3 | RNVC: 2

24 Oct 2008

5340-33-208-3956
Dust And Moisture Seal Protective Cap

332083956
32301604: RNCC: 3 | RNVC: 2

7 May 2010

5340-33-208-3420
Line Supporting Strap

332083420
20132: RNCC: 3 | RNVC: 2

16 Apr 2010

5340-33-108-3621
Helical Compression Spring Seat

331083621
-06902219-0: RNCC: 3 | RNVC: 2

28 Feb 2001

5340-33-207-5724
Angle Bracket

332075724
A051420: RNCC: 3 | RNVC: 2

29 Jun 2009

5340-33-207-8331
Mounting Bracket

332078331
41025769: RNCC: 3 | RNVC: 2
41020026: RNCC: 5 | RNVC: 1

28 Oct 2009

5340-33-103-4472
Seal Retaining Plate

331034472
213666: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-7808
Dust And Moisture Seal Protective Plug

332027808
2540-901185: RNCC: 3 | RNVC: 2

28 Oct 2003

5340-33-211-1242
Double Angle Bracket

332111242
VR01181000: RNCC: 3 | RNVC: 2
VR01181000: RNCC: 3 | RNVC: 2

16 Jun 2013

5340-33-000-4401
Nut And Bolt Locking Plate

330004401
517252: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-000-2847
Nut And Bolt Locking Plate

330002847
579239: RNCC: 1 | RNVC: 2
579239: RNCC: 3 | RNVC: 2

22 May 1987

5340-33-209-0089
Mounting Plate

332090089
INS003058990040700: RNCC: 3 | RNVC: 2

24 May 2011

5340-33-210-1721
Double Angle Bracket

332101721
TOM0819914P02: RNCC: 3 | RNVC: 2

15 Jun 2012

5340-33-209-6232
Mounting Plate

332096232
0750030821: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-33-005-1524
Seal Retaining Plate

330051524
CE100200-2601: RNCC: 3 | RNVC: 2

3 Nov 2000

5340-33-208-9922
Mounting Plate

332089922
1025901954: RNCC: 3 | RNVC: 2
9743.100.1380: RNCC: 5 | RNVC: 2

23 May 2011

5340-33-208-1656
Mounting Plate

332081656
INS003096990140000: RNCC: 3 | RNVC: 2

11 Mar 2010

5340-33-155-8745

5340-33-156-0357

5340-33-126-0242
Metal Corredera

5340-33-156-0328

5340-33-160-3829
Spring Tension Clip

331603829
79.03.079.029: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-9338
Webbing Strap

332069338
235209: RNCC: 3 | RNVC: 2

22 Sep 2008

5340-33-207-6500
Mounting Bracket

332076500
R0094800: RNCC: 3 | RNVC: 2

21 Jul 2009

5340-33-126-0239
Metal Corredera

5340-33-156-0376

5340-33-209-1707
Mounting Bracket

332091707
9743.100.0003: RNCC: 3 | RNVC: 2
1025902011: RNCC: 5 | RNVC: 2

7 Jul 2011

5340-33-206-8452
Angle Bracket

332068452
PCMSABMR133: RNCC: 3 | RNVC: 2

17 Jul 2008

5340-33-155-0783

5340-33-158-7593
Terminal Conector

5340-33-126-0427
Acceso Tapa

5340-33-154-8223

5340-33-180-5564
Double Angle Bracket

331805564
139900: RNCC: 3 | RNVC: 2

25 Jul 1995

5340-33-207-2003
Mounting Bracket

332072003
NV-010000: RNCC: 3 | RNVC: 2

14 Jan 2009

5340-33-000-2846
Nut And Bolt Locking Plate

330002846
565909: RNCC: 1 | RNVC: 2

22 May 1987

5340-33-200-7105
Sindle Grading

332007105
IN-050A-MV01I.30: RNCC: 3 | RNVC: 2

1 Mar 2002

5340-33-204-6235
Spring Tension Clip

332046235
83271-63D10: RNCC: 3 | RNVC: 2
83271-63D10: RNCC: 5 | RNVC: 2

8 Nov 2005

5340-33-161-3774
Dust And Moisture Seal Boot

331613774
627673: RNCC: 3 | RNVC: 2
91105232: RNCC: 5 | RNVC: 9

11 Apr 1995

5340-33-209-4088
Access Cover

332094088
0738065200: RNCC: 3 | RNVC: 2

2 Dec 2011

5340-33-210-0934
Dust And Moisture Seal Protective Cap

332100934
GCRM80001A: RNCC: 3 | RNVC: 2

22 May 2012

5340-33-209-4993
Mounting Plate

332094993
INS003112060110300: RNCC: 3 | RNVC: 2

11 Jan 2012

5340-33-207-2245
Mounting Bracket

332072245
10-A310501-0401: RNCC: 3 | RNVC: 2

22 Jan 2009

5340-33-209-3412
Extension Handle

332093412
A71340: RNCC: 3 | RNVC: 2

4 Nov 2011

5340-33-207-3884
Elastic Strap

332073884
980697: RNCC: 3 | RNVC: 2

25 Mar 2009

5340-33-210-6567
Webbing Strap

332106567
101090726000: RNCC: 3 | RNVC: 2
L6512.10.03/1.0: RNCC: 3 | RNVC: 2

17 Dec 2012

5340-33-115-8333
Dust And Moisture Seal Boot

331158333
307951 (3): RNCC: 3 | RNVC: 2

13 Nov 1992

5340-33-211-5286
Quick Release Plunger

332115286
BN13370-M10/2205410: RNCC: 3 | RNVC: 2
0731487: RNCC: 5 | RNVC: 2

24 Nov 2013

5340-33-206-6973
Access Cover

332066973
53201-99222310-01: RNCC: 3 | RNVC: 2

7 May 2008

5340-33-000-0483
Double Angle Bracket

330000483
H350GS/D021/22: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-155-7852
Double Angle Bracket

331557852
740332: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-200-4171
Nut And Bolt Locking Plate

332004171
W 3554 351 4Q: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-202-7310
Double Angle Bracket

332027310
DF 200 078 A: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-33-209-8488
Mounting Bracket

332098488
175011: RNCC: 3 | RNVC: 2

20 Mar 2012

5340-33-208-2664
Expansion Shield

332082664
3908: RNCC: 3 | RNVC: 2

5 Apr 2010

5340-33-160-3891
No Metalico Tope

331603891
75.524.185: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-1484
P Placa De Montaje

331031484
1005-004538: RNCC: 3 | RNVC: 2
3108: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-210-3121
Mechanic Equipment Hardware Kit

332103121
11.09.03.01: RNCC: 3 | RNVC: 2

27 Jul 2012

5340-33-153-8937
Manual Control Handle

331538937
690437: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-190-2575
Spring Tension Clip

331902575
44312: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-203-2773
Hand Crank

332032773
9673.120.0410: RNCC: 3 | RNVC: 2
2510901705: RNCC: 5 | RNVC: 2
2510901705: RNCC: 5 | RNVC: 2

20 Feb 2004

5340-33-000-2860
Helical Compression Spring Seat

330002860
646886: RNCC: 1 | RNVC: 2
646886: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-33-004-5586
Seal Retaining Plate

330045586
NN51395P01: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-33-102-1269
Hand Crank

331021269
C-35: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-116-3575
Dust And Moisture Seal Boot

331163575
4740.017: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-1100
Escutcheon Plate

331071100
77 00 521 766: RNCC: 3 | RNVC: 2

29 Jun 1999

5340-33-103-2254
Helical Compression Spring Seat

331032254
1055-000148: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-1258
Strap Hinge Leaf

331071258
6101050: RNCC: 3 | RNVC: 2
PCAMI/RP/0306101050: RNCC: 6 | RNVC: 9

29 Jun 1999

5340-33-208-6461
Butt Hinge Leaf

332086461
95-82227-0103: RNCC: 3 | RNVC: 2

19 Nov 2010

5340-33-206-7076
Mounting Bracket

332067076
09108053: RNCC: 1 | RNVC: 2
BP0012: RNCC: 3 | RNVC: 2

9 May 2008

5340-33-211-4468
Dust And Moisture Seal Protective Plug

332114468
212-81109-04-1: RNCC: 3 | RNVC: 2

25 Oct 2013

5340-33-003-7350
Dust And Moisture Seal Protective Plug

330037350
-00931-1: RNCC: 3 | RNVC: 2

5 Jun 1998

5340-33-209-1885
Mounting Bracket

332091885
M541B1753200: RNCC: 3 | RNVC: 2

14 Jul 2011

5340-33-209-4036
Dust And Moisture Seal Protective Plug

332094036
0738001450: RNCC: 3 | RNVC: 2

1 Dec 2011

5340-33-209-6248
Angle Bracket

332096248
0750035661: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-33-209-5598
Mounting Plate

332095598
0738060890: RNCC: 3 | RNVC: 2

17 Jan 2012

5340-33-206-3983
Helical Compression Spring Seat

332063983
XX-000019011200: RNCC: 3 | RNVC: 2
000019011200: RNCC: 5 | RNVC: 2

18 Dec 2007

5340-33-105-9345
Manual Control Handle

331059345
16584: RNCC: 3 | RNVC: 2

28 Aug 1996

5340-33-003-2493
Mechanic Equipment Hardware Kit

330032493
221022620: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-33-209-6832
Electronic Equipment Hardware Kit

332096832
0149929210000: RNCC: 3 | RNVC: 2

1 Feb 2012

5340-33-209-6241
Mounting Plate

332096241
0750031971: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-33-003-1297
Threaded Hinged Standoff

330031297
01-05-519: RNCC: 3 | RNVC: 2
RAB2327: RNCC: 5 | RNVC: 2

8 Sep 1995

5340-33-108-5400
Mounting Actuator Plate

331085400
9644.251.9420: RNCC: 3 | RNVC: 2
2510901010: RNCC: 5 | RNVC: 2
2510901010: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-210-2681
Mounting Bracket

332102681
999132194: RNCC: 3 | RNVC: 2
999132194: RNCC: 5 | RNVC: 2

11 Jul 2012

5340-33-107-4774
Manual Control Lever

331074774
43 801 382: RNCC: 3 | RNVC: 2
2510010749: RNCC: 5 | RNVC: 2
2510010749: RNCC: 5 | RNVC: 2

11 Nov 1999

5340-33-209-5720
Mounting Bracket

332095720
0738065700: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-33-160-1838
Union Placa

5340-33-156-0176

5340-33-156-0168

5340-33-157-7717
Double Angle Bracket

331577717
577392: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-2072

5340-33-188-9071
Sujecion Brida

5340-33-125-9235
Orificio Acce Marco

5340-33-201-1630
Retencion: Brida

5340-33-161-2618
Multiple Angle Bracket

331612618
319243: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-33-202-2094
Electronic Equipment Hardware Kit

332022094
ET5560001775B: RNCC: 3 | RNVC: 2

25 Feb 2003

5340-33-106-9349
Spring Holder

331069349
191265: RNCC: 3 | RNVC: 2

7 Apr 1999

5340-33-102-9727
Dust And Moisture Seal Protective Cap

331029727
214539: RNCC: 3 | RNVC: 2

13 Nov 1992

5340-33-188-9070
Sujecion Brida

5340-33-208-7117
Webbing Strap

332087117
5701-25+2311TR-30 800/200: RNCC: 3 | RNVC: 2

10 Jan 2011

5340-33-106-6413
Parach Goma Banda

331066413
M180224: RNCC: 3 | RNVC: 2
M18024: RNCC: 3 | RNVC: 2

23 Nov 1998

5340-33-158-1135
Dust And Moisture Seal Boot

331581135
554409: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-3872
No Metalico Tope

331603872
95.571.591: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-181-1193
No Metalico Tope

331811193
-46271-G9701: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-207-6343
Loop Clamp

332076343
EN4114F12NH1: RNCC: 2 | RNVC: 2

17 Jul 2009

5340-33-206-6523
Mounting Plate

332066523
280.4.150.090.12: RNCC: 3 | RNVC: 2

11 Apr 2008

5340-33-207-6848
Angle Bracket

332076848
DF 404 573 A: RNCC: 3 | RNVC: 2

6 Aug 2009

5340-33-210-5782
Mounting Bracket

332105782
35-61576-0003: RNCC: 3 | RNVC: 2

23 Nov 2012

5340-33-105-5573
Dust And Moisture Seal Protective Cap

331055573
75100063-0: RNCC: 3 | RNVC: 2
120889C: RNCC: 5 | RNVC: 2

9 May 1996

5340-33-156-2682
Headless Grooved Rod

331562682
-28842-G9725: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-4266
No Metalico Tope

331084266
9644.250.0841: RNCC: 3 | RNVC: 2
2510008552: RNCC: 5 | RNVC: 2
2510008552: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-189-1935
Escutcheon Plate

331891935
02040040: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-209-6189
Access Cover

332096189
AU_1087_P2: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-33-206-6045
Sealing Plug Assembly

332066045
23056593MAS: RNCC: 3 | RNVC: 2

14 Mar 2008

5340-33-180-5213
Clip Retainer Plate

331805213
PRC1687: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-211-2316
Double Angle Bracket

332112316
TP252627: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-33-000-2042
Dust And Moisture Seal Protective Plug

330002042
180410: RNCC: 1 | RNVC: 2

11 Dec 1986

5340-33-209-5559
Access Cover

332095559
9743.100.0904: RNCC: 3 | RNVC: 2
5895900037: RNCC: 5 | RNVC: 2

17 Jan 2012

5340-33-126-6196
Instrument Mounting Clamp

331266196
PT17130: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-208-5788
Mounting Plate

332085788
VRM3,15-34: RNCC: 3 | RNVC: 2
D10040534: RNCC: 5 | RNVC: 2

6 Oct 2010

5340-33-204-8361
Double Angle Bracket

332048361
AB060810: RNCC: 3 | RNVC: 2

13 Feb 2006

5340-33-116-3549
Double Angle Bracket

331163549
8615.020: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-180-6394
Fija Kit De Piezas

331806394
193081: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-204-8959
No Metalico Tope

332048959
09321-06026: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-208-9393
Manual Control Lever

332089393
CNB06004A: RNCC: 3 | RNVC: 2

17 May 2011

5340-33-208-3725
Safety Cable Kit

332083725
XX-L-SUU20F5.037: RNCC: 3 | RNVC: 2
FMA-09-SUU20F5-037: RNCC: 5 | RNVC: 2

26 Apr 2010

5340-33-207-6067
Access Cover

332076067
0931212900700: RNCC: 3 | RNVC: 2

10 Jul 2009

5340-33-206-9101
Dust And Moisture Seal Protective Cap-Plug

332069101
21947-85C80: RNCC: 3 | RNVC: 2
21947-85C80: RNCC: 5 | RNVC: 2

16 Sep 2008

5340-33-209-7430
Mounting Bracket

332097430
107MEC12001: RNCC: 3 | RNVC: 2

16 Feb 2012

5340-33-208-1149
Access Cover

332081149
3970-101: RNCC: 3 | RNVC: 2

25 Feb 2010

5340-33-209-3853
Mounting Bracket

332093853
0738189500: RNCC: 3 | RNVC: 2

30 Nov 2011

5340-33-209-0943
Access Cover

332090943
5051734: RNCC: 3 | RNVC: 2

7 Jun 2011

5340-33-208-0798
Bumper

332080798
116001: RNCC: 3 | RNVC: 2

15 Feb 2010

5340-33-205-3515
Clip Retainer Plate

332053515
SICT030110: RNCC: 3 | RNVC: 2

22 Aug 2006

5340-33-203-4371
Suction Cup

332034371
DESATASCADOR DOBLE CAMPANA: RNCC: 3 | RNVC: 2
71034: RNCC: 3 | RNVC: 2

2 Apr 2004

5340-33-209-1720
Spring Tension Clip

332091720
0750025940: RNCC: 3 | RNVC: 2
0750 24: RNCC: 5 | RNVC: 2

7 Jul 2011

5340-33-209-6765
Mounting Plate

332096765
0738050510: RNCC: 3 | RNVC: 2

31 Jan 2012

5340-33-200-6411
Double Angle Bracket

332006411
7562.252.1020: RNCC: 3 | RNVC: 2
2510010791: RNCC: 5 | RNVC: 2

14 Feb 2002

5340-33-154-7236
Manual Control Handle

331547236
736318: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-004-5565
Seal Retaining Plate

330045565
NN53171P01: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-33-116-3724
Dust And Moisture Seal Protective Cap

331163724
6685.045: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-5420
Dust And Moisture Seal Protective Cap-Plug

332025420
00711-2-7: RNCC: 3 | RNVC: 2

11 Aug 2003

5340-33-211-2431
Utility Resilient Mount

332112431
BRB 50 135453: RNCC: 3 | RNVC: 2
135453: RNCC: 5 | RNVC: 2
LIPA01160: RNCC: 5 | RNVC: 2

23 Jul 2013

5340-33-201-8106
Mechanic Equipment Hardware Kit

332018106
319180: RNCC: 3 | RNVC: 2

25 Oct 2002

5340-33-107-4611
Double Angle Bracket

331074611
321746: RNCC: 3 | RNVC: 2
321746: RNCC: 5 | RNVC: 2

15 Nov 1999

5340-33-003-8102
Assembled Nut Retainer

330038102
730092006: RNCC: 3 | RNVC: 2

10 Jun 1998

5340-33-206-5067
Mounting Bracket

332065067
0555003200: RNCC: 3 | RNVC: 2

12 Feb 2008

5340-33-115-9827
Sealing Plug Assembly

331159827
000.848.00.00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-5265
Dust And Moisture Seal Protective Plug

330045265
025818: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-205-8956
Headless Straight Rod

332058956
AGB115001J07: RNCC: 3 | RNVC: 2

8 May 2007

5340-33-209-6770
Mounting Plate

332096770
0854720000500: RNCC: 3 | RNVC: 2

31 Jan 2012

5340-33-002-9555
Dust And Moisture Seal Protective Cap

330029555
6317270048: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-201-7894
Double Angle Bracket

332017894
NN60671G01: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-33-190-2553
Spring Tension Clip

331902553
44328: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-2721
Spacing Threaded Standoff

330042721
730030205: RNCC: 3 | RNVC: 2

25 Nov 1998

5340-33-207-2007
Crank Handle

332072007
MNAG010300: RNCC: 3 | RNVC: 2

14 Jan 2009

5340-33-107-9507
Mechanic Equipment Hardware Kit

331079507
SP08518: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-33-189-2245
Hand Crank

331892245
01030080: RNCC: 3 | RNVC: 2
PCAMI/1000000130080: RNCC: 5 | RNVC: 2

20 Jul 1995

5340-33-208-4340
Mounting Plate

332084340
1005.002621: RNCC: 3 | RNVC: 2

14 Jun 2010

5340-33-209-1325
Catch Strike

332091325
0751032131: RNCC: 3 | RNVC: 2

21 Jun 2011

5340-33-000-2032
Dust And Moisture Seal Protective Plug

330002032
090106: RNCC: 1 | RNVC: 2

11 Dec 1986

5340-33-004-5591
Seal Retaining Plate

330045591
NN51407P01: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-33-104-0410
Alojamiento Izquier

331040410
631 723 01 27: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-209-8123
Catch Strike

332098123
VR01181100000033: RNCC: 3 | RNVC: 2

7 Mar 2012

5340-33-201-7982
No Metalico Tope

332017982
2510002965: RNCC: 3 | RNVC: 2

25 Oct 2002

5340-33-201-4663
Double Angle Bracket

332014663
J57167804-401: RNCC: 3 | RNVC: 2

30 Jul 2002

5340-33-209-0315
Mounting Bracket

332090315
0750031000: RNCC: 3 | RNVC: 2

26 May 2011

5340-33-209-8047
Bumper

332098047
H081 2865: RNCC: 3 | RNVC: 2

7 Mar 2012

5340-33-187-3600
Anillo

331873600
195521: RNCC: 3 | RNVC: 2
195521: RNCC: 3 | RNVC: 2
0079052244: RNCC: 5 | RNVC: 2

11 Apr 1995

5340-33-211-1161
Multiple Angle Bracket

332111161
0221112: RNCC: 3 | RNVC: 2

16 Jun 2013

5340-33-156-3218
Manual Control Handle

331563218
-93836-G970X: RNCC: 3 | RNVC: 2
-93836-G972X: RNCC: 3 | RNVC: 2
-93836-G971X: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-210-6147
Mounting Bracket

332106147
0853722400000: RNCC: 3 | RNVC: 2

30 Nov 2012

5340-33-004-4385
Spring Tension Clip

330044385
86.18.02.CT.50: RNCC: 3 | RNVC: 2

26 Mar 1999

5340-33-206-3744
Dust And Moisture Seal Protective Plug

332063744
200763623: RNCC: 3 | RNVC: 2

7 Dec 2007

5340-33-181-1418
No Metalico Tope

331811418
-65170-G971X: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-210-4756
Access Cover

332104756
AU_153: RNCC: 3 | RNVC: 2

9 Oct 2012

5340-33-000-6512
Dust And Moisture Seal Protective Plug

330006512
540-104.04: RNCC: 3 | RNVC: 2

29 Jun 1988

5340-33-004-3195
Dust And Moisture Seal Protective Cap

330043195
SE141521990A: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-33-155-7854
Double Angle Bracket

331557854
690425: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-106-4955
Headless Straight Rod

331064955
-90507-G9600: RNCC: 3 | RNVC: 2

9 Mar 1998

5340-33-155-1051
Placa

331551051
22078: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-205-2448
Metallic Solid Wheel

332052448
CBD56501P44: RNCC: 3 | RNVC: 2

30 Jun 2006

5340-33-203-3086
Utility Access Door

332033086
5030458: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-33-003-2893
Mechanic Equipment Hardware Kit

330032893
221023955: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-189-1943
Headless Straight Rod

331891943
02200270: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-205-8242
Dust And Moisture Seal Boot

332058242
7700678649: RNCC: 3 | RNVC: 2

17 Apr 2007

5340-33-003-6864
Electronic Equipment Hardware Kit

330036864
CM30660004100: RNCC: 3 | RNVC: 2

1 Jun 1998

5340-33-205-4139
Double Angle Bracket

332054139
W290620371300: RNCC: 3 | RNVC: 2

15 Sep 2006

5340-33-107-4136
Multiple Angle Bracket

331074136
7062.252.0610: RNCC: 3 | RNVC: 2
2510700563: RNCC: 5 | RNVC: 2

15 Oct 1999

5340-33-210-2556
Access Door Hinge

332102556
231142700: RNCC: 3 | RNVC: 2

9 Jul 2012

5340-33-003-7075
Utility Resilient Mount

330037075
8756888: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-33-115-9907
Helical Compression Spring Seat

331159907
101.181.12.00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-0918
Hand Crank

332050918
0222443: RNCC: 3 | RNVC: 2

27 Apr 2006

5340-33-210-5062
Access Cover

332105062
AU_550_P100: RNCC: 3 | RNVC: 2

19 Oct 2012

5340-33-210-4653
Thumb Latch

332104653
236449: RNCC: 3 | RNVC: 2

5 Oct 2012

5340-33-004-2839
Double Angle Bracket

330042839
NN60258P01: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-155-4645
Spring Holder

331554645
584725: RNCC: 3 | RNVC: 2
584725: RNCC: 3 | RNVC: 2
4005520: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-154-7233
Helical Compression Spring Seat

331547233
544698.95: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-000-6447
Helical Compression Spring Seat

330006447
126430 95: RNCC: 1 | RNVC: 2

15 Jun 1988

5340-33-103-4521
Brida

331034521
247674: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-3949
Multiple Angle Bracket

332013949
A2811255-403: RNCC: 3 | RNVC: 2

5 Jul 2002

5340-33-206-3684
Dust And Moisture Seal Protective Cap

332063684
C25A0090F: RNCC: 3 | RNVC: 2

5 Dec 2007

5340-33-208-4450
Mounting Bracket

332084450
5052245: RNCC: 3 | RNVC: 2

25 Jun 2010

5340-33-209-6695
Bumper

332096695
35-25171-0201: RNCC: 3 | RNVC: 2

30 Jan 2012

5340-33-208-9318
Mounting Bracket

332089318
W280698445110: RNCC: 3 | RNVC: 2

11 May 2011

Load More Results