What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 29 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 29 of 39

5340-33-003-7155
Dust And Moisture Seal Protective Plug

330037155
196243: RNCC: 3 | RNVC: 2
0630361042: RNCC: 3 | RNVC: 2
196243: RNCC: 5 | RNVC: 2

4 Jun 1998

5340-33-160-2816
Sujecion Brida

5340-33-126-0146
Union Placa

5340-33-155-8747

5340-33-126-0432
Acceso Tapa

5340-33-126-0429
Acceso Tapa

5340-33-208-7504
Manual Control Lever

332087504
DG01000-03: RNCC: 3 | RNVC: 2

1 Feb 2011

5340-33-107-8658
Window Regulator Handle

331078658
235009: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-33-188-1904
Helical Compression Spring Seat

331881904
GE 156409.00: RNCC: 3 | RNVC: 2

12 Jun 1995

5340-33-188-1943
Dust And Moisture Seal Protective Cap

331881943
NR 142030.80: RNCC: 3 | RNVC: 2

12 Jun 1995

5340-33-206-8561
Rod End Clevis

332068561
1.120.28.01.012: RNCC: 3 | RNVC: 2

21 Jul 2008

5340-33-207-7507
Access Cover

332077507
5047651: RNCC: 3 | RNVC: 2
1.150.92.001: RNCC: 5 | RNVC: 2

30 Sep 2009

5340-33-188-7510
Presilla Abrazadera

5340-33-002-1745
Bush-

330021745
35-31211-0801: RNCC: 3 | RNVC: 2

12 Jul 1993

5340-33-103-0566
Hand Crank

331030566
1015-000462: RNCC: 3 | RNVC: 2
16-D-5: RNCC: 3 | RNVC: 2

6 Aug 1992

5340-33-102-3024
Dust And Moisture Seal Protective Plug

331023024
T976-B-15: RNCC: 3 | RNVC: 2

11 Jan 1991

5340-33-200-0194
Turbine Exit Case -

332000194
NN52171G01: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-33-104-8963
Dust And Moisture Seal Boot

331048963
192084: RNCC: 3 | RNVC: 2
192084: RNCC: 6 | RNVC: 9

12 Sep 1995

5340-33-116-3326
Juego Chapas Seguro

331163326
8190.011: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-8758
Instrument Mounting Clamp

330048758
NRN60011P12: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-33-209-5822
Mounting Plate

332095822
0738252200: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-33-208-6899
Access Cover

332086899
0830224001500: RNCC: 3 | RNVC: 2

13 Dec 2010

5340-33-206-9892
Double Angle Bracket

332069892
TP251739: RNCC: 3 | RNVC: 2

3 Oct 2008

5340-33-210-4325
Retaining Band

332104325
10910010: RNCC: 3 | RNVC: 2

2 Oct 2012

5340-33-003-0613
Nut And Bolt Locking Plate

330030613
0022211900: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-202-8736
Seal Retaining Plate

332028736
VR04102100: RNCC: 3 | RNVC: 2

17 Nov 2003

5340-33-210-3249
Mounting Bracket

332103249
M541A1415202: RNCC: 3 | RNVC: 2

1 Aug 2012

5340-33-207-1418
Double Angle Bracket

332071418
980644: RNCC: 3 | RNVC: 2

1 Dec 2008

5340-33-115-6049
Helical Compression Spring Retainer

331156049
14206705900: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-33-002-8328
Dust And Moisture Seal Protective Cap

330028328
SE021586422E: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-206-6271
Mounting Bracket

332066271
291038-1: RNCC: 3 | RNVC: 2

27 Mar 2008

5340-33-000-4417
Nut And Bolt Locking Plate

330004417
551972: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-106-1602
No Metalico Tope

331061602
-02300399-0: RNCC: 3 | RNVC: 2

20 May 1997

5340-33-208-6780
Corner Brace

332086780
363000114-009: RNCC: 3 | RNVC: 2

1 Dec 2010

5340-33-208-8734
Retaining Strap

332088734
XX-423107002100: RNCC: 3 | RNVC: 2
423107002100: RNCC: 5 | RNVC: 2
717331150110: RNCC: 6 | RNVC: 9

6 Apr 2011

5340-33-001-9949
Double Angle Bracket

330019949
35-51103-0501: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-102-3834
Manual Control Handle

331023834
MDL-3-9: RNCC: 3 | RNVC: 2
MDL-3-9: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-6249
Manual Control Lever

332026249
9673.250.1280: RNCC: 3 | RNVC: 2
1005900413: RNCC: 5 | RNVC: 2
1005900413: RNCC: 5 | RNVC: 2

16 Sep 2003

5340-33-211-1149
Manual Control Lever

332111149
0213744: RNCC: 3 | RNVC: 2

16 Jun 2013

5340-33-200-9050
Headless Straight Rod

332009050
5315700052: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-33-108-0528
Nut And Bolt Retainer

331080528
9644.281.5126: RNCC: 3 | RNVC: 2
2930900059: RNCC: 5 | RNVC: 2
2930900059: RNCC: 5 | RNVC: 2

11 Dec 2000

5340-33-005-3108
Dust And Moisture Seal Protective Cover

330053108
VRM3,15-11: RNCC: 3 | RNVC: 2

10 May 2001

5340-33-106-4022
Manual Control Handle

331064022
-07700397-0: RNCC: 3 | RNVC: 2

12 Dec 1997

5340-33-103-1663
Threaded Hinged Standoff

331031663
5940-000263: RNCC: 3 | RNVC: 2
3316: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-204-9743
Dust And Moisture Seal Protective Cap-Plug

332049743
0220262: RNCC: 3 | RNVC: 2

6 Mar 2006

5340-33-210-2938
Butt Hinge Leaf

332102938
212-13104-05-2: RNCC: 3 | RNVC: 2

24 Jul 2012

5340-33-160-3874
No Metalico Tope

331603874
91.500.679: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-2066
Angle Bracket

332072066
210577: RNCC: 3 | RNVC: 2

15 Jan 2009

5340-33-209-9129
Dust And Moisture Seal Protective Cap-Plug

332099129
35-82213-0301: RNCC: 3 | RNVC: 2

30 Mar 2012

5340-33-209-1306
Webbing Strap

332091306
0751050201: RNCC: 3 | RNVC: 2

20 Jun 2011

5340-33-181-2871
Helical Compression Spring Seat

331812871
-07700592-3: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-155-7833
Double Angle Bracket

331557833
313436: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-161-3174
Dust And Moisture Seal Protective Cap

331613174
521009: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-33-205-3065
Spacing Threaded Standoff

332053065
25313-27C02: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-33-126-8111
Dust And Moisture Seal Protective Cap-Plug

331268111
649947: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-9739
Angle Bracket

332069739
TP251274: RNCC: 3 | RNVC: 2

1 Oct 2008

5340-33-208-7115
Webbing Strap

332087115
235-H2-50+232-50 3750/1000: RNCC: 3 | RNVC: 2

10 Jan 2011

5340-33-002-8508
Brida De Acumulador

330028508
35-43130-0001: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-207-9638
Friction Catch Stud

332079638
201291180: RNCC: 3 | RNVC: 2
PFE20129118002: RNCC: 5 | RNVC: 2

14 Dec 2009

5340-33-207-6498
Mounting Bracket

332076498
R0094673: RNCC: 3 | RNVC: 2

21 Jul 2009

5340-33-126-9841
Tensor

5340-33-200-1567
Multiple Angle Bracket

332001567
35-23310-1101: RNCC: 3 | RNVC: 2
35-23310-1101A01: RNCC: 5 | RNVC: 2

25 Oct 2001

5340-33-126-3499
Union Placa

5340-33-126-0426
Acceso Tapa

5340-33-211-1985
Manual Control Handle

332111985
098173377: RNCC: 3 | RNVC: 2

8 Jul 2013

5340-33-002-8529
Tope De Lapes

330028529
EP.61100: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-202-4771
Soporte Lateral Hus

332024771
2.135.023: RNCC: 3 | RNVC: 2
5028709: RNCC: 5 | RNVC: 2

7 Jul 2003

5340-33-158-5569
Dust And Moisture Seal Protective Cap

331585569
-07700335-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-208-5499
Bumper

332085499
95-94507-0301: RNCC: 3 | RNVC: 2

23 Sep 2010

5340-33-209-3987
Mounting Bracket

332093987
0738022400: RNCC: 3 | RNVC: 2

1 Dec 2011

5340-33-003-4944
Dust And Moisture Seal Protective Cap

330034944
98409758: RNCC: 3 | RNVC: 2

6 Nov 1997

5340-33-003-4307
Headless Straight Rod

330034307
159-711: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-210-2120
Double Angle Bracket

332102120
2510010194: RNCC: 3 | RNVC: 2
9644.251.5920: RNCC: 5 | RNVC: 2

28 Jun 2012

5340-33-208-3549
Angle Bracket

332083549
MAM-HE-02-00-10: RNCC: 3 | RNVC: 2

22 Apr 2010

5340-33-003-4295
Headless Straight Rod

330034295
159-388: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-190-2564
Spring Tension Clip

331902564
44322: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-206-7984
Protection Bellows

332067984
35-82019-0201: RNCC: 3 | RNVC: 2

26 Jun 2008

5340-33-211-4499
Escutcheon Plate

332114499
212-81201-06-1: RNCC: 3 | RNVC: 2

25 Oct 2013

5340-33-207-7913
Bumper

332077913
95-94150-0101: RNCC: 3 | RNVC: 2

19 Oct 2009

5340-33-210-6135
Webbing Strap

332106135
0218181: RNCC: 3 | RNVC: 2

30 Nov 2012

5340-33-210-7729
Dust And Moisture Seal Protective Cap

332107729
212-P0540-0001: RNCC: 3 | RNVC: 2

5 Feb 2013

5340-33-208-7012
Mounting Bracket

332087012
5049468: RNCC: 3 | RNVC: 2

4 Jan 2011

5340-33-210-5024
Corrosion Preventive Anode

332105024
Z-2.686: RNCC: 3 | RNVC: 2

18 Oct 2012

5340-33-206-6807
Webbing Strap

332066807
OEWL19VEO005000: RNCC: 3 | RNVC: 2

24 Apr 2008

5340-33-206-9725
Bumper

332069725
OP0119012: RNCC: 3 | RNVC: 2

30 Sep 2008

5340-33-154-8015

5340-33-209-6147
Section Block Clamp

332096147
0738160770: RNCC: 3 | RNVC: 2

20 Jan 2012

5340-33-155-7850
Double Angle Bracket

331557850
697469: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-106-3392
Window Regulator Handle

331063392
0022410700: RNCC: 3 | RNVC: 2

15 Sep 1997

5340-33-005-0562
Double Angle Bracket

330050562
NN60167P01: RNCC: 3 | RNVC: 2

13 Jun 2000

5340-33-187-4855
Headless Straight Rod

331874855
161186: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-160-2978
Angulos Mu Soporte

5340-33-208-1786
Mounting Plate

332081786
35-71110-1101: RNCC: 3 | RNVC: 2

18 Mar 2010

5340-33-004-8761
Multiple Angle Bracket

330048761
NN60272G01: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-33-154-7227
Helical Compression Spring Seat

331547227
180902.61: RNCC: 3 | RNVC: 2
0079035484: RNCC: 5 | RNVC: 2

2 Oct 1990

5340-33-204-9200
Helical Compression Spring Seat

332049200
21414-29F00: RNCC: 3 | RNVC: 2

22 Feb 2006

5340-33-190-5713
Dust And Moisture Seal Protective Cap

331905713
43172434-004: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-209-4108
Metallic Solid Wheel

332094108
0738093120: RNCC: 3 | RNVC: 2

2 Dec 2011

5340-33-209-1924
Mounting Bracket

332091924
5035960: RNCC: 3 | RNVC: 2

14 Jul 2011

5340-33-201-1623
Angular: Soporte

5340-33-208-3794
Angle Bracket

332083794
V0AN62PT3A1: RNCC: 3 | RNVC: 2
CA-65/20A-3134: RNCC: 5 | RNVC: 2
BAV0AN62PT3A1SE: RNCC: 5 | RNVC: 2

3 May 2010

5340-33-208-0664
Doorknob

332080664
331625501: RNCC: 3 | RNVC: 2
5340900057: RNCC: 5 | RNVC: 2

8 Feb 2010

5340-33-003-6607
Dust And Moisture Seal Protective Plug

330036607
191312: RNCC: 3 | RNVC: 2
4139339015: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-209-1704
Swivel Caster

332091704
2-2354: RNCC: 3 | RNVC: 2
MPG4080NPR4: RNCC: 5 | RNVC: 2
10ZVL80-POL: RNCC: 5 | RNVC: 2

7 Jul 2011

5340-33-003-2897
Mechanic Equipment Hardware Kit

330032897
221023960: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-161-4027
Multiple Angle Bracket

331614027
733255: RNCC: 3 | RNVC: 2
28100268: RNCC: 5 | RNVC: 9

20 Jul 1995

5340-33-004-4609
Double Angle Bracket

330044609
NN60124G01: RNCC: 3 | RNVC: 2

18 May 1999

5340-33-153-8932
Manual Control Handle

331538932
573355: RNCC: 3 | RNVC: 2
83100005: RNCC: 5 | RNVC: 9

29 Aug 1996

5340-33-211-2432
Utility Resilient Mount

332112432
148171: RNCC: 3 | RNVC: 2
LIPA01190: RNCC: 5 | RNVC: 2

23 Jul 2013

5340-33-209-1888
Mounting Plate

332091888
M541B1867207: RNCC: 3 | RNVC: 2

14 Jul 2011

5340-33-207-5294
Block Clamp

332075294
95-82223-0001: RNCC: 3 | RNVC: 2

2 Jun 2009

5340-33-204-6294
Mastil Ensamblado

332046294
5034587: RNCC: 3 | RNVC: 2

10 Nov 2005

5340-33-187-3337
Nut And Bolt Locking Plate

331873337
002005: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-2819
Sujecion Brida

5340-33-156-0473

5340-33-005-0591
Restrictor Plate

330050591
NN57207P01: RNCC: 3 | RNVC: 2

13 Jun 2000

5340-33-180-7661
Dust And Moisture Seal Protective Cap

331807661
515848: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-003-7179
Luggage Handle

330037179
02412650: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-33-208-9764
Ball Socket Seat

332089764
3120900248: RNCC: 3 | RNVC: 2
9742.101.0139: RNCC: 5 | RNVC: 2

20 May 2011

5340-33-208-7709
Mounting Bracket

332087709
95-72604-0301: RNCC: 3 | RNVC: 2

18 Feb 2011

5340-33-209-3711
Angle Bracket

332093711
0738238670: RNCC: 3 | RNVC: 2

29 Nov 2011

5340-33-003-3985
Dust And Moisture Seal Protective Cap

330033985
11.16288-0003: RNCC: 3 | RNVC: 2
11.16288-0003: RNCC: 5 | RNVC: 2

27 Aug 1997

5340-33-160-6142
Manual Control Handle

331606142
79.10.019.175: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-209-1453
Bow Handle

332091453
98176975: RNCC: 3 | RNVC: 2

28 Jun 2011

5340-33-202-0565
Dust And Moisture Seal Protective Cap

332020565
1025-900454: RNCC: 3 | RNVC: 2

2 Jan 2003

5340-33-206-8368
Access Cover

332068368
95-53351-0003: RNCC: 3 | RNVC: 2

16 Jul 2008

5340-33-160-2406
Control Empunadura

5340-33-160-3218
Retencion Banda

5340-33-205-1387
Parach Goma Banda

332051387
1.120.26.02.010: RNCC: 3 | RNVC: 2

12 May 2006

5340-33-102-0731
Dust And Moisture Seal Protective Cap

331020731
C-2-25: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-203-7229
Dust And Moisture Seal Protective Cap

332037229
364-1-D: RNCC: 3 | RNVC: 2

10 Sep 2004

5340-33-103-5307
Tapa Mando Auxiliar

331035307
9505-3-3-01: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-103-1483
P Placa De Montaje

331031483
1005-004379: RNCC: 3 | RNVC: 2
2516: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-206-9713
Spacing Threaded Standoff

332069713
F5-20207: RNCC: 3 | RNVC: 2

30 Sep 2008

5340-33-207-2904
Dust And Moisture Seal Protective Plug

332072904
95-94064-0901: RNCC: 3 | RNVC: 2

19 Feb 2009

5340-33-156-0197

5340-33-156-0465

5340-33-208-8483
Mounting Plate

332088483
INS003058060030000: RNCC: 3 | RNVC: 2

24 Mar 2011

5340-33-205-8235
Fijacion Soporte Co

332058235
126 25 002: RNCC: 3 | RNVC: 2

17 Apr 2007

5340-33-209-0325
Mounting Bracket

332090325
0750032141: RNCC: 3 | RNVC: 2

26 May 2011

5340-33-201-4674
Double Angle Bracket

332014674
J92666180-401: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-33-207-6305
Angle Bracket

332076305
R0095815: RNCC: 3 | RNVC: 2

16 Jul 2009

5340-33-209-0679
Corner Brace

332090679
513780: RNCC: 3 | RNVC: 2
513780: RNCC: 5 | RNVC: 2

30 May 2011

5340-33-207-8176
Mounting Bracket

332078176
R0095825: RNCC: 3 | RNVC: 2

23 Oct 2009

5340-33-208-6370
Mounting Bracket

332086370
R0112694: RNCC: 3 | RNVC: 2

12 Nov 2010

5340-33-208-7627
Access Cover

332087627
TAP-0001: RNCC: 3 | RNVC: 2

9 Feb 2011

5340-33-206-6258
Mounting Bracket

332066258
SM2004021: RNCC: 3 | RNVC: 2

27 Mar 2008

5340-33-208-7552
Lock-Release Lever

332087552
R0104040: RNCC: 3 | RNVC: 2

3 Feb 2011

5340-33-209-2417
Mounting Bracket

332092417
W280684645201: RNCC: 3 | RNVC: 2

30 Aug 2011

5340-33-181-1175
Spring Tension Clip

331811175
-24220-V6600: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-204-8962
No Metalico Tope

332048962
34996-43410: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-103-3457
Manual Control Handle

331033457
2403.61: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-3578
Mounting Plate

332073578
185066: RNCC: 3 | RNVC: 2

12 Mar 2009

5340-33-209-5564
Mounting Plate

332095564
2510904083: RNCC: 3 | RNVC: 2
9644.592.5004: RNCC: 5 | RNVC: 2

17 Jan 2012

5340-33-211-4500
Escutcheon Plate

332114500
212-81201-02-1: RNCC: 3 | RNVC: 2

25 Oct 2013

5340-33-200-9143
Dust And Moisture Seal Protective Cap

332009143
709035020: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-33-108-5464
Double Angle Bracket

331085464
9644.250.5627: RNCC: 3 | RNVC: 2
2540000728: RNCC: 5 | RNVC: 2
2540000728: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-210-4751
Access Cover

332104751
AU_718: RNCC: 3 | RNVC: 2

9 Oct 2012

5340-33-125-8585
Respiradero Tapon

5340-33-125-8635
Equipo Ele Conector

5340-33-125-8708

5340-33-125-8637
Equipo Ele Conector

5340-33-125-8749

5340-33-126-0424
Acceso Tapa

5340-33-125-7992
Union Placa

5340-33-125-8634
Equipo Ele Conector

5340-33-105-1183
Dust And Moisture Seal Protective Plug

331051183
CMA90100-1/5-10: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-204-4627
Manual Control Handle

332044627
CBD58503P49: RNCC: 3 | RNVC: 2

16 Sep 2005

5340-33-156-2185
Double Angle Bracket

331562185
-11241-Y9500: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-202-1440
Montajes Placa

5340-33-156-0406

5340-33-208-3113
Rim Latch

332083113
CCE2 CER004: RNCC: 3 | RNVC: 2

7 Apr 2010

5340-33-003-2244
Spacing Threaded Standoff

330032244
721024501: RNCC: 3 | RNVC: 2

27 Jan 1997

5340-33-187-2699
Nonmetallic Solid Wheel

331872699
25,10.19: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-106-5268
Casement Fastener

331065268
A0402030: RNCC: 3 | RNVC: 2
PCAMI/RP/27A0402030: RNCC: 4 | RNVC: 1
010426: RNCC: 5 | RNVC: 1

6 Apr 1998

5340-33-190-2555
Spring Tension Clip

331902555
44330: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-210-3975
Access Cover

332103975
AZ_027: RNCC: 3 | RNVC: 2

27 Sep 2012

5340-33-210-0615
Webbing Strap

332100615
00235-1-50+05744-50 4000/2500: RNCC: 3 | RNVC: 2

18 May 2012

5340-33-201-3184
Manual Control Handle

332013184
165028: RNCC: 3 | RNVC: 2

21 Jun 2002

5340-33-155-0547
Spring Tension Clip

331550547
79.03.077.134: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-161-6223
Helical Compression Spring Retainer

331616223
J-144: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-33-004-5247
Dust And Moisture Seal Protective Plug

330045247
701001760: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-206-1192
Multiple Angle Bracket

332061192
NN60993G01: RNCC: 3 | RNVC: 2

21 Aug 2007

5340-33-208-8664
Mounting Bracket

332088664
D0931610021: RNCC: 3 | RNVC: 2

31 Mar 2011

5340-33-210-3960
Multiple Angle Bracket

332103960
225628: RNCC: 3 | RNVC: 2

27 Sep 2012

5340-33-004-5523
Handle Cover

330045523
35-81576-0601: RNCC: 3 | RNVC: 2

16 Jun 1999

5340-33-001-1650
Double Angle Bracket

330011650
35-61156-0201: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-160-7505
Nut And Bolt Locking Plate

331607505
75.522.444: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-202-4879
Fusible Mecanico

332024879
2.135.105-A: RNCC: 3 | RNVC: 2
5029130: RNCC: 5 | RNVC: 2

11 Jul 2003

5340-33-107-8024
Mechanic Equipment Hardware Kit

331078024
522-848.00: RNCC: 3 | RNVC: 2

20 Jun 2000

5340-33-001-9991
Seal Retaining Plate

330019991
35-21001-0101: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-210-4046
Latch Bar

332104046
236405: RNCC: 3 | RNVC: 2

28 Sep 2012

5340-33-206-9317
Bow Handle

332069317
235454: RNCC: 3 | RNVC: 2

22 Sep 2008

5340-33-210-2119
Block Clamp

332102119
0738035580: RNCC: 3 | RNVC: 2

28 Jun 2012

5340-33-107-4614
Electronic Equipment Hardware Kit

331074614
W290687502600: RNCC: 3 | RNVC: 2

15 Nov 1999

5340-33-004-5601
Double Angle Bracket

330045601
NN60168P01: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-33-205-8040
Hand Crank

332058040
N2010304: RNCC: 3 | RNVC: 2

9 Apr 2007

5340-33-002-6790
Nut And Bolt Retainer

330026790
12935: RNCC: 3 | RNVC: 2

27 Jun 1995

5340-33-209-0459
Flush Catch

332090459
0660 00: RNCC: 3 | RNVC: 2
5340900014: RNCC: 5 | RNVC: 2

26 May 2011

5340-33-209-5419
Mounting Plate

332095419
0750020311: RNCC: 3 | RNVC: 2

17 Jan 2012

5340-33-210-5140
Webbing Strap

332105140
MES-000422-1: RNCC: 3 | RNVC: 2

22 Oct 2012

5340-33-207-8026
Butt Hinge Leaf

332078026
PR0043: RNCC: 3 | RNVC: 2

21 Oct 2009

5340-33-204-8319
Strap Hinge Leaf

332048319
DF 404 695 AE: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-33-204-8971
No Metalico Tope

332048971
35139-45230: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-209-8374
Retaining Clip

332098374
0663.20.1000.02: RNCC: 3 | RNVC: 2

15 Mar 2012

5340-33-115-9250
Helical Compression Spring Seat

331159250
01.00234/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-209-5983
Mounting Bracket

332095983
MAAC030100000070: RNCC: 3 | RNVC: 2

19 Jan 2012

5340-33-181-5885
Dust And Moisture Seal Protective Cap-Plug

331815885
-01201880: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-209-1341
Corner Brace

332091341
513779: RNCC: 3 | RNVC: 2
513779: RNCC: 5 | RNVC: 2

21 Jun 2011

5340-33-209-0109
Mounting Bracket

332090109
AGC028136HTR: RNCC: 3 | RNVC: 2

24 May 2011

5340-33-208-3917
Key Holder

332083917
060: RNCC: 3 | RNVC: 2

5 May 2010

5340-33-002-2547
Dust And Moisture Seal Protective Cap-Plug

330022547
912-02810: RNCC: 3 | RNVC: 2

24 Mar 1994

5340-33-204-8947
No Metalico Tope

332048947
45149-31300: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-209-7055
Crank Handle

332097055
371232512: RNCC: 3 | RNVC: 2

10 Feb 2012

5340-33-207-0460
Loop Clamp

332070460
120421X: RNCC: 3 | RNVC: 2

23 Oct 2008

5340-33-208-0043
Access Cover

332080043
5049880: RNCC: 3 | RNVC: 2

8 Jan 2010

5340-33-208-3889
Dust And Moisture Seal Protective Cover

332083889
32301213: RNCC: 3 | RNVC: 2

5 May 2010

5340-33-207-0201
Angle Bracket

332070201
INS003024010020307: RNCC: 3 | RNVC: 2

14 Oct 2008

5340-33-001-4644
Double Angle Bracket

330014644
92026602: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-107-4584
Electronic Equipment Hardware Kit

331074584
W290682500300: RNCC: 3 | RNVC: 2

15 Nov 1999

5340-33-206-0654
Dust And Moisture Seal Protective Plug

332060654
65285 31K01: RNCC: 3 | RNVC: 2
65285-31K01: RNCC: 5 | RNVC: 2

18 Jul 2007

5340-33-207-6308
Mounting Bracket

332076308
R0096089: RNCC: 3 | RNVC: 2

16 Jul 2009

5340-33-209-6483
Loop Clamp

332096483
0738170390: RNCC: 3 | RNVC: 2

25 Jan 2012

5340-33-102-3835
Seal Retaining Plate

331023835
MDL2-1-7: RNCC: 3 | RNVC: 2
MDL2-1-7: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-210-2940
Butt Hinge Leaf

332102940
212-13104-09-1: RNCC: 3 | RNVC: 2

24 Jul 2012

5340-33-161-3379
Marcador De Aire

331613379
544842.91: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-208-1585
Angle Bracket

332081585
3055238-01: RNCC: 3 | RNVC: 2

9 Mar 2010

5340-33-201-1817
Sliding Door Track Bracket

332011817
222432757-01: RNCC: 3 | RNVC: 2

28 May 2002

5340-33-210-7021
Mounting Bracket

332107021
843057: RNCC: 3 | RNVC: 2
2920-33-M29-7808: RNCC: 6 | RNVC: 9

21 Jan 2013

5340-33-003-2956
Double Angle Bracket

330032956
721024895: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-181-1135
Dust And Moisture Seal Protective Plug

331811135
-06212-1400P: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-8043
Mechanic Equipment Hardware Kit

332018043
319884: RNCC: 3 | RNVC: 2

25 Oct 2002

5340-33-003-1089
Dust And Moisture Seal Protective Cap

330031089
90580-G9501: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-106-3271
No Metalico Tope

331063271
631 310 03 77: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-003-6586
Dust And Moisture Seal Protective Cap

330036586
4139306409: RNCC: 3 | RNVC: 2
196930: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-155-7867
Double Angle Bracket

331557867
630456: RNCC: 3 | RNVC: 2
630456.90: RNCC: 5 | RNVC: 2

18 Oct 1990

5340-33-204-3492
Nut And Bolt Locking Plate

332043492
PS-310033: RNCC: 3 | RNVC: 2

19 Jul 2005

5340-33-207-6420
Mounting Plate

332076420
R0095959: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-209-4342
Access Cover

332094342
0738077300: RNCC: 3 | RNVC: 2

20 Dec 2011

5340-33-207-6009
Angle Bracket

332076009
0753046020: RNCC: 3 | RNVC: 2

9 Jul 2009

5340-33-206-7798
Spring Loaded Cylinder Fastener

332067798
CH001: RNCC: 3 | RNVC: 2

18 Jun 2008

5340-33-210-6298
Mounting Bracket

332106298
19567000: RNCC: 3 | RNVC: 2

2 Dec 2012

5340-33-103-1978
Manual Control Lever

331031978
2590-000101: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-6514
Manual Control Handle

331166514
312.001: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-107-3644
No Metalico Tope

331073644
5340.000223: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-207-6502
Double Angle Bracket

332076502
R0094639: RNCC: 3 | RNVC: 2

21 Jul 2009

5340-33-155-7846
Double Angle Bracket

331557846
696424: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-155-8445
Nut And Bolt Locking Plate

331558445
8709940132: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-33-206-0131
Utility Resilient Mount

332060131
K3221041: RNCC: 3 | RNVC: 2
180.1.50.719: RNCC: 5 | RNVC: 2
9999-33-R90-2118: RNCC: 6 | RNVC: 9

21 Jun 2007

5340-33-201-6091
Bisagra De Tope

5340-33-208-4027
Mounting Plate

332084027
CSA-07020018-15H: RNCC: 3 | RNVC: 2

13 May 2010

5340-33-001-1895
Bow Handle

330011895
35-65116-0201: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-154-6089
Helical Compression Spring Seat

331546089
582285: RNCC: 3 | RNVC: 2

1 Dec 1989

5340-33-210-2734
Double Angle Bracket

332102734
2540900517: RNCC: 3 | RNVC: 2
9644.251.6556: RNCC: 5 | RNVC: 2

12 Jul 2012

5340-33-208-0641
Hand Crank

332080641
CZ00000004: RNCC: 3 | RNVC: 2

5 Feb 2010

5340-33-202-7314
Butt Hinge Leaf

332027314
DF 304 459 A: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-33-181-3538
Spring Tension Clip

331813538
-01201871-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-203-2109
Utility Resilient Mount

332032109
5218 151: RNCC: 3 | RNVC: 2
5340000670: RNCC: 5 | RNVC: 2

16 Feb 2004

5340-33-160-2815
Sujecion Brida

5340-33-201-3673
Flush Lock

332013673
1.17.531.026: RNCC: 3 | RNVC: 2

2 Jul 2002

5340-33-209-5901
Corrosion Preventive Anode

332095901
Z-SUB9215: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-33-104-1397
Helical Compression Spring Seat

331041397
111 462 04 85: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-5477
Manual Control Lever

331085477
9644.250.6970: RNCC: 3 | RNVC: 2
2540000812: RNCC: 5 | RNVC: 2
2540000812: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-161-2617
Double Angle Bracket

331612617
319025: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-33-005-0606
Double Angle Bracket

330050606
NN60247P01: RNCC: 3 | RNVC: 2

13 Jun 2000

5340-33-004-7084
Multiple Angle Bracket

330047084
NN60396: RNCC: 1 | RNVC: 2
NN60396G01: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-33-210-0932
Multiple Angle Bracket

332100932
GCRM16504A: RNCC: 3 | RNVC: 2

22 May 2012

5340-33-208-7942
Webbing Strap

332087942
9184: RNCC: 3 | RNVC: 2
W269323000202: RNCC: 5 | RNVC: 2

28 Feb 2011

5340-33-208-6898
Access Cover

332086898
0830224002600: RNCC: 3 | RNVC: 2

13 Dec 2010

5340-33-202-3425
Patin De Guia Con E

332023425
90.19.00: RNCC: 3 | RNVC: 2

10 Apr 2003

5340-33-103-1001
Suplemento Disparad

331031001
411.091.1440: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-209-5520
Window Retaining Plate

332095520
0738150360: RNCC: 3 | RNVC: 2

17 Jan 2012

5340-33-207-7429
Lock-Release Lever

332077429
09.02.01.31: RNCC: 3 | RNVC: 2

28 Sep 2009

5340-33-210-4329
Angle Bracket

332104329
185214: RNCC: 3 | RNVC: 2

2 Oct 2012

5340-33-206-9349
Angle Bracket

332069349
980551: RNCC: 3 | RNVC: 2

22 Sep 2008

5340-33-207-7571
Mounting Plate

332077571
5049483: RNCC: 3 | RNVC: 2

2 Oct 2009

5340-33-102-1817
Manual Control Handle

331021817
MCL-7-12: RNCC: 3 | RNVC: 2
MCL-7-12: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-207-6307
Mounting Bracket

332076307
R0095996: RNCC: 3 | RNVC: 2

16 Jul 2009

5340-33-155-7829
Double Angle Bracket

331557829
313576: RNCC: 3 | RNVC: 2
313576: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-116-2483
Dust And Moisture Seal Protective Plug

331162483
V-253.004: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-209-6117
Angle Bracket

332096117
0770191530: RNCC: 3 | RNVC: 2

20 Jan 2012

5340-33-207-0573
Mechanical Stop

332070573
CA75800-2901: RNCC: 3 | RNVC: 2

29 Oct 2008

5340-33-210-6640
Mounting Plate

332106640
060531A-00: RNCC: 3 | RNVC: 2

19 Dec 2012

5340-33-116-8395
Helical Compression Spring Retainer

331168395
22 562: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-3191
Electronic Equipment Hardware Kit

332073191
706286: RNCC: 3 | RNVC: 2

2 Mar 2009

5340-33-210-6024
Dust And Moisture Seal Protective Cover

332106024
TA7004P001: RNCC: 3 | RNVC: 2

27 Nov 2012

5340-33-105-9648
Double Angle Bracket

331059648
10.062: RNCC: 3 | RNVC: 2

20 Sep 1996

5340-33-160-3839
Spring Tension Clip

331603839
26.189.649: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-3149
Double Angle Bracket

331063149
230050: RNCC: 3 | RNVC: 2

4 Sep 1997

5340-33-180-5951
Headless Straight Rod

331805951
168163: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-1220
Spring Holder

332001220
323908: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-201-9537
Dust And Moisture Seal Protective Cap

332019537
723591769-02: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-33-208-5472
Mechanical Stop

332085472
7002905: RNCC: 3 | RNVC: 2
313335: RNCC: 5 | RNVC: 2

21 Sep 2010

5340-33-207-0189
Extension Drawer Slide

332070189
INS003024010020302: RNCC: 3 | RNVC: 2

13 Oct 2008

5340-33-209-4879
Plug Button

332094879
D0941311482: RNCC: 3 | RNVC: 2

30 Dec 2011

5340-33-160-2800
Muelle Helico Reten

5340-33-160-2144
Presilla Abrazadera

5340-33-208-6414
Door Handle

332086414
M2000BL: RNCC: 3 | RNVC: 2

17 Nov 2010

5340-33-160-2807
Plano Macizo Disco

5340-33-205-5495
Manual Control Handle

332055495
51801-003: RNCC: 3 | RNVC: 2

15 Dec 2006

5340-33-211-4497
Escutcheon Plate

332114497
212-81200-27-1: RNCC: 3 | RNVC: 2

25 Oct 2013

5340-33-201-8032
Mechanic Equipment Hardware Kit

332018032
319742: RNCC: 3 | RNVC: 2

25 Oct 2002

5340-33-207-7099
Pawl Fastener

332077099
CAN51006AD175: RNCC: 3 | RNVC: 2

9 Sep 2009

5340-33-108-5630
Manual Control Lever

331085630
9644.250.6031: RNCC: 3 | RNVC: 2
5340001656: RNCC: 5 | RNVC: 2
5340001656: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-125-8639
Equipo Ele Conector

5340-33-125-8631
Equipo Ele Conector

5340-33-116-2872
Muelle Comp Asiento

5340-33-116-2704
Acceso: Tapa

5340-33-156-0425

5340-33-156-0315

5340-33-116-2654
Union Placa

5340-33-206-6837
Angle Bracket

332066837
62023103: RNCC: 3 | RNVC: 2

29 Apr 2008

5340-33-210-4330
Angle Bracket

332104330
185215: RNCC: 3 | RNVC: 2

2 Oct 2012

5340-33-207-6408
Mounting Plate

332076408
R0095956: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-126-0141
Union Placa

5340-33-126-9867
Pol Protectora Tapa

5340-33-002-0521
Fl Mounting Plate

330020521
C-20030-10/2-I-03-12: RNCC: 3 | RNVC: 2

7 Aug 1992

5340-33-001-1896
Instrument Mounting Clamp

330011896
35-65116-0301: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-207-6701
Dust And Moisture Seal Protective Cover

332076701
5049175: RNCC: 3 | RNVC: 2

29 Jul 2009

5340-33-209-5723
Double Angle Bracket

332095723
1005005862: RNCC: 3 | RNVC: 2
9644.810.0076: RNCC: 5 | RNVC: 2

18 Jan 2012

5340-33-202-1028
Dust And Moisture Seal Protective Cover

332021028
6237390-U1: RNCC: 3 | RNVC: 2

14 Jan 2003

5340-33-107-0192
Metallic Solid Wheel

331070192
O-78-5-02-1: RNCC: 3 | RNVC: 2
PCAMI/RP/0200785021: RNCC: 6 | RNVC: 9

25 May 1999

5340-33-002-1592
Multiple Angle Bracket

330021592
921.412.02: RNCC: 3 | RNVC: 2

1 Jul 1993

5340-33-210-6472
Rod End Clevis

332106472
330A87-2179-20-MAM-1: RNCC: 3 | RNVC: 2

12 Dec 2012

5340-33-208-8765
Mounting Plate

332088765
INS003134990160000: RNCC: 3 | RNVC: 2

11 Apr 2011

5340-33-116-8190
Headless Straight Rod

331168190
M-112-1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-208-9048
Manual Control Handle

332089048
E-100-2G: RNCC: 3 | RNVC: 2

26 Apr 2011

5340-33-207-5886
Fork Tine

332075886
2.159.001-F: RNCC: 3 | RNVC: 2
2.159.099.01-F: RNCC: 5 | RNVC: 9

3 Jul 2009

5340-33-003-3544
Dust And Moisture Seal Protective Cap

330033544
11.12526-0012: RNCC: 3 | RNVC: 2

26 Jun 1997

5340-33-116-8163
Dust And Moisture Seal Protective Cap-Plug

331168163
902.002.002: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-5890
Access Cover

332075890
DF 410 036 BX: RNCC: 3 | RNVC: 2

3 Jul 2009

5340-33-206-8241
Mounting Plate

332068241
1.124.92.090-A: RNCC: 3 | RNVC: 2
5043291: RNCC: 5 | RNVC: 2

9 Jul 2008

5340-33-211-6386
Electronic Equipment Hardware Kit

332116386
220121115: RNCC: 3 | RNVC: 2

19 Dec 2013

5340-33-126-1608
Acceso Tapa

5340-33-145-5290
Double Angle Bracket

331455290
85-253: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-1561
Manual Control Handle

331161561
4 200 871: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-9654
Spring Holder

332039654
WW 286 245-U: RNCC: 3 | RNVC: 2
590.14.06: RNCC: 5 | RNVC: 2

28 Jan 2005

5340-33-156-0161
Helical Compression Spring Seat

331560161
-03902945-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-8738

5340-33-155-2410

5340-33-116-2696
Acceso: Tapa

5340-33-116-2699
Acceso: Tapa

5340-33-156-0335

5340-33-156-0341

5340-33-005-0048
Dust And Moisture Seal Boot

330050048
0902828: RNCC: 3 | RNVC: 2

3 May 2000

5340-33-003-2804
Grooved Clamp Coupling Ferrule

330032804
PCT00002: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-200-2127
Enrasado Pestillo

5340-33-201-3925
Fija: Asa

5340-33-126-5993
Presilla Abrazadera

5340-33-209-7553
Clamp Bolt Assembly

332097553
35-21235-0005-50: RNCC: 3 | RNVC: 2

22 Feb 2012

5340-33-206-2710
Manual Control Lever

332062710
XX-423206005000: RNCC: 3 | RNVC: 2
423206005000: RNCC: 5 | RNVC: 2

19 Oct 2007

5340-33-207-1849
Angle Bracket

332071849
2409: RNCC: 3 | RNVC: 2

8 Jan 2009

5340-33-157-5447
Multiple Angle Bracket

331575447
631429: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-209-4411
Access Cover

332094411
0738045600: RNCC: 3 | RNVC: 2

20 Dec 2011

5340-33-208-0709
Mounting Bracket

332080709
610CM110001: RNCC: 3 | RNVC: 2

9 Feb 2010

5340-33-002-8884
Dust And Moisture Seal Protective Cap

330028884
0008260352: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-201-2591
Utility Resilient Mount

332012591
2110524020: RNCC: 3 | RNVC: 2

11 Jun 2002

5340-33-210-8395
Dust And Moisture Seal Protective Plug

332108395
95-54400-0201: RNCC: 3 | RNVC: 2

5 Mar 2013

5340-33-203-9304
Placa Serigrafiada

332039304
055.08.01.M04: RNCC: 3 | RNVC: 2
055.08.01.M03: RNCC: 5 | RNVC: 9

24 Jan 2005

5340-33-002-9288
No Metalico Tope

330029288
6312930450: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-116-8160
Dust And Moisture Seal Protective Cap-Plug

331168160
543.7.117: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-115-8789
Grooved Clamp Coupling Ferrule

331158789
12Tx: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-33-107-4555
Electronic Equipment Hardware Kit

331074555
W290677602600: RNCC: 3 | RNVC: 2

4 Nov 1999

5340-33-207-0715
Bail Handle

332070715
217ME730045: RNCC: 3 | RNVC: 2

3 Nov 2008

5340-33-209-7416
Snap-In Threaded Standoff

332097416
14468: RNCC: 3 | RNVC: 2
14468: RNCC: 3 | RNVC: 2

16 Feb 2012

5340-33-210-6184
Webbing Strap

332106184
0226464: RNCC: 3 | RNVC: 2

30 Nov 2012

5340-33-201-1046
No Metalico Tope

332011046
321545: RNCC: 3 | RNVC: 2

30 Apr 2002

5340-33-209-3997
Mounting Bracket

332093997
0738012330: RNCC: 3 | RNVC: 2

1 Dec 2011

5340-33-003-0443
Soporte Pilot Fleje

330030443
7701027607: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-210-7563
Filler Opening Cap

332107563
AC500092: RNCC: 3 | RNVC: 2

3 Feb 2013

5340-33-003-2475
Mechanic Equipment Hardware Kit

330032475
221024230: RNCC: 3 | RNVC: 2

13 Feb 1997

5340-33-116-7050
Double Angle Bracket

331167050
411.527: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-8034
Helical Compression Spring Seat

332008034
1005.002306: RNCC: 3 | RNVC: 2

13 Mar 2002

5340-33-209-1703
Swivel Caster

332091703
2-1846: RNCC: 3 | RNVC: 2
10TVFD200-HUB: RNCC: 5 | RNVC: 2
TV-2-1846: RNCC: 5 | RNVC: 2

7 Jul 2011

5340-33-209-6050
Runner

332096050
0738002500: RNCC: 3 | RNVC: 2

19 Jan 2012

5340-33-208-5970
Mounting Bracket

332085970
R0113059: RNCC: 3 | RNVC: 2

19 Oct 2010

5340-33-209-1887
Mounting Plate

332091887
M541B1867206: RNCC: 3 | RNVC: 2

14 Jul 2011

5340-33-209-0811
Mounting Bracket

332090811
1025901581: RNCC: 3 | RNVC: 2
9682.101.2361: RNCC: 5 | RNVC: 2

1 Jun 2011

5340-33-160-2801
Muelle Helico Reten

5340-33-160-3867
Spring Tension Clip

331603867
79.03.079.018: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-2499
Mechanic Equipment Hardware Kit

330032499
221022881: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-33-200-7484
Mechanic Equipment Hardware Kit

332007484
7356.252.3700: RNCC: 3 | RNVC: 2
BMR2147: RNCC: 5 | RNVC: 2

6 Mar 2002

5340-33-156-0224

5340-33-209-9136
Mounting Plate

332099136
35-94076-0601: RNCC: 3 | RNVC: 2

30 Mar 2012

5340-33-004-5282
Deslizante: Tirante

5340-33-210-4811
Rod Retainer Clip

332104811
212-21179-12-1: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-33-108-6974
Double Angle Bracket

331086974
7053.252.0144: RNCC: 3 | RNVC: 2
2510700395: RNCC: 5 | RNVC: 2

14 Jun 2001

5340-33-180-6386
Fija Kit De Piezas

331806386
193073: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-104-7048
Dust And Moisture Seal Boot

331047048
557249: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-8201
Multiple Angle Bracket

330048201
NN54715P01: RNCC: 3 | RNVC: 2

22 Nov 1999

5340-33-156-0354

5340-33-160-2820
Sujecion Brida

5340-33-160-2813
Sujecion Brida

5340-33-107-4473
Line Supporting Strap

331074473
W280677500020: RNCC: 3 | RNVC: 2

13 Oct 1999

5340-33-157-8548
Double Angle Bracket

331578548
783631: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-3158
Manual Control Handle

331563158
-68791-C8200: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-2803
Multiple Angle Bracket

330042803
NN60314G01: RNCC: 3 | RNVC: 2

30 Nov 1998

5340-33-155-7866
Double Angle Bracket

331557866
767906: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-000-6451
Helical Compression Spring Seat

330006451
126434 95: RNCC: 1 | RNVC: 2

15 Jun 1988

5340-33-108-2649
Manual Control Handle

331082649
9644.121.0077: RNCC: 3 | RNVC: 2
2510010692: RNCC: 5 | RNVC: 2
2510010692: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-160-3113
Sealing Plug Assembly

331603113
115361066: RNCC: 3 | RNVC: 9

11 Jul 1995

5340-33-108-4468
Manual Control Lever

331084468
9644.251.5616: RNCC: 3 | RNVC: 2
2540001457: RNCC: 5 | RNVC: 2
2540001457: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-209-0373
Track Stop

332090373
AGC038160D14: RNCC: 3 | RNVC: 2

26 May 2011

5340-33-160-7486
Helical Compression Spring Seat

331607486
93.010.380: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-205-2449
Metallic Solid Wheel

332052449
CBD56501P46: RNCC: 3 | RNVC: 2

30 Jun 2006

5340-33-188-8965
Oscila Amortiguador

5340-33-209-7275
Dust And Moisture Seal Protective Cover

332097275
35-81568-0001: RNCC: 3 | RNVC: 2

15 Feb 2012

5340-33-000-2848
Nut And Bolt Locking Plate

330002848
642444: RNCC: 1 | RNVC: 2
5340001028: RNCC: 3 | RNVC: 2
642444: RNCC: 3 | RNVC: 2

22 May 1987

5340-33-114-4990
Helical Compression Spring Seat

331144990
5TG 2-35-38: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-001-2987
Mounting

330012987
CAN68511CB10: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-206-7936
Mounting Bracket

332067936
CBD58505G13: RNCC: 3 | RNVC: 2

24 Jun 2008

5340-33-206-9745
Mounting Bracket

332069745
TP251288: RNCC: 3 | RNVC: 2

1 Oct 2008

5340-33-126-4497
Acceso Tapa

5340-33-209-6188
Access Cover

332096188
AU_1087_P1: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-33-187-3601
Anillo

331873601
195525: RNCC: 3 | RNVC: 2
195525: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-33-003-2107
Dust And Moisture Seal Protective Cap-Plug

330032107
212-56147-13-1: RNCC: 3 | RNVC: 2

13 Dec 1996

5340-33-105-0524
Hand Crank

331050524
REH-25-2-5-14: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-004-8219
Retainer

330048219
NN54164P01: RNCC: 3 | RNVC: 2

22 Nov 1999

5340-33-207-1433
Webbing Strap

332071433
235322: RNCC: 3 | RNVC: 2

2 Dec 2008

5340-33-156-0310

5340-33-126-0145
Deslizante Tirante

5340-33-002-1751
Guar-

330021751
35-65122-0301: RNCC: 3 | RNVC: 2

12 Jul 1993

5340-33-208-7723
Metal Grille

332087723
EMB3-401-000-00: RNCC: 3 | RNVC: 2

18 Feb 2011

5340-33-209-0453
Access Cover

332090453
0750032101: RNCC: 3 | RNVC: 2

26 May 2011

5340-33-210-5661
Handle Grip

332105661
MAGNETOOLS: RNCC: 3 | RNVC: 2
8437012160088: RNCC: 5 | RNVC: 2

20 Nov 2012

5340-33-209-1116
Bumper

332091116
110009: RNCC: 3 | RNVC: 2

14 Jun 2011

5340-33-206-5684
Mounting Bracket

332065684
30307001-001: RNCC: 3 | RNVC: 2

6 Mar 2008

5340-33-160-3013
Acceso Tapa

5340-33-210-3057
Access Cover

332103057
999154107: RNCC: 3 | RNVC: 2
999154107: RNCC: 5 | RNVC: 2

24 Jul 2012

5340-33-125-5717
Presilla Abrazadera

5340-33-114-5638

5340-33-210-6129
Webbing Strap

332106129
0111566: RNCC: 3 | RNVC: 2

30 Nov 2012

5340-33-209-5934
Mounting Bracket

332095934
0738199700: RNCC: 3 | RNVC: 2

19 Jan 2012

5340-33-200-1598
De Pres Abrazadera

5340-33-126-3502
Union Placa

5340-33-207-6440
Mounting Bracket

332076440
R0097686: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-208-4172
Access Cover

332084172
32301403: RNCC: 3 | RNVC: 2

31 May 2010

5340-33-209-8468
Snap Hook

332098468
191-180: RNCC: 3 | RNVC: 2

15 Mar 2012

5340-33-200-9026
Spacing Threaded Standoff

332009026
3465700084: RNCC: 3 | RNVC: 2

11 Apr 2002

5340-33-206-9581
Mechanical Stop

332069581
150.546-100.40.17: RNCC: 3 | RNVC: 2

26 Sep 2008

5340-33-210-5294
Spring Window Bolt

332105294
35-21197-0004A02: RNCC: 3 | RNVC: 2

25 Oct 2012

5340-33-206-7396
Buckle

332067396
PS-912100: RNCC: 3 | RNVC: 2

23 May 2008

5340-33-102-2510
Helical Compression Spring Retainer

331022510
1005-001689: RNCC: 3 | RNVC: 2

15 Jan 1991

5340-33-207-2884
Bumper

332072884
35-25151-0303: RNCC: 3 | RNVC: 2

19 Feb 2009

5340-33-005-2189
Manual Control Lever

330052189
BTH-16: RNCC: 3 | RNVC: 2

23 Jan 2001

5340-33-201-7154
Mechanic Equipment Hardware Kit

332017154
320587: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-33-209-9146
Rod End Clevis

332099146
35-53357-0101: RNCC: 3 | RNVC: 2

30 Mar 2012

5340-33-207-7219
Bumper

332077219
5049173: RNCC: 3 | RNVC: 2

16 Sep 2009

5340-33-157-8173
Double Angle Bracket

331578173
737328: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-1864
Union Placa

5340-33-160-1862
Angular Soporte

5340-33-116-2500
Headless Straight Rod

331162500
408.108A: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-8007
Casement Fastener

332048007
1202210: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-33-208-7315
Corrosion Preventive Anode

332087315
3855411: RNCC: 3 | RNVC: 2

18 Jan 2011

5340-33-207-9769
Manual Control Handle

332079769
09304-10835: RNCC: 3 | RNVC: 2

17 Dec 2009

5340-33-206-9864
Double Angle Bracket

332069864
TP250277: RNCC: 3 | RNVC: 2

3 Oct 2008

5340-33-209-0614
Rod End Clevis

332090614
M361A4236000: RNCC: 3 | RNVC: 2

26 May 2011

5340-33-206-8614
Mounting Bracket

332068614
6702478: RNCC: 3 | RNVC: 2
6702478B: RNCC: 5 | RNVC: 2

22 Jul 2008

5340-33-207-3414
Angle Bracket

332073414
PS-610582: RNCC: 3 | RNVC: 2

9 Mar 2009

5340-33-126-0345
Pol Protector Tapon

5340-33-156-0366

5340-33-156-0408

5340-33-156-0321

5340-33-209-0510
Mechanic Equipment Hardware Kit

332090510
M32TC0025000: RNCC: 3 | RNVC: 2

26 May 2011

5340-33-206-5631
Mounting Bracket

332065631
GAEG014000: RNCC: 3 | RNVC: 9

6 Mar 2008

5340-33-209-9369
Manual Control Handle

332099369
35-81576-0501: RNCC: 3 | RNVC: 2

3 Apr 2012

5340-33-202-7472
Butt Hinge Leaf

332027472
DF 304 137 A: RNCC: 3 | RNVC: 2

10 Oct 2003

5340-33-114-5021
Dust And Moisture Seal Protective Cap

331145021
5TG 2-90: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-208-6377
Mounting Bracket

332086377
R0111987: RNCC: 3 | RNVC: 2

12 Nov 2010

5340-33-206-9135
Mortise Lock Set

332069135
201010400: RNCC: 3 | RNVC: 2
PFE20101040000: RNCC: 5 | RNVC: 2

16 Sep 2008

5340-33-208-7194
Mounting Plate

332087194
J92563811-003: RNCC: 3 | RNVC: 2

12 Jan 2011

5340-33-000-6511
Dust And Moisture Seal Protective Plug

330006511
540-104.03: RNCC: 3 | RNVC: 2

29 Jun 1988

5340-33-105-0552
Manual Control Lever

331050552
RAL-200-7-26: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-002-4833
Dust And Moisture Seal Protective Cap-Plug

330024833
212-22002-260-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-206-8071
Access Cover

332068071
99900172: RNCC: 3 | RNVC: 2

1 Jul 2008

5340-33-203-9773
Dust And Moisture Seal Boot

332039773
770484: RNCC: 3 | RNVC: 2

31 Jan 2005

5340-33-002-8434
Resbalon

330028434
SE127529750A: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-208-6835
Mounting Bracket

332086835
19694300: RNCC: 3 | RNVC: 2

7 Dec 2010

5340-33-209-0761
Rod End Clevis

332090761
M361A4236200: RNCC: 3 | RNVC: 2

31 May 2011

5340-33-209-3713
Mounting Plate

332093713
0738113410: RNCC: 3 | RNVC: 2

29 Nov 2011

Load More Results