What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 28 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 28 of 39

5340-33-107-9506
Manual Control Lever

331079506
SP08517: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-33-207-2444
Angle Bracket

332072444
40P41254: RNCC: 3 | RNVC: 2

28 Jan 2009

5340-33-200-8060
Manual Control Lever

332008060
2510.002994: RNCC: 3 | RNVC: 2

13 Mar 2002

5340-33-207-8446
Half Grooved Segment

332078446
95-71100-0101: RNCC: 3 | RNVC: 2

30 Oct 2009

5340-33-154-8726

5340-33-157-8371
Acceso Tapa

5340-33-155-8743

5340-33-126-9800
Presilla Abrazadera

5340-33-125-7989
Union Placa

5340-33-107-3745
Goma: Parachoques

5340-33-160-1865
Angular Soporte

5340-33-156-0280

5340-33-156-0410

5340-33-002-1747
Bush-

330021747
35-33213-1201: RNCC: 3 | RNVC: 2

12 Jul 1993

5340-33-207-5084
Shelf Bracket

332075084
727358025-01: RNCC: 3 | RNVC: 2
0930185802501: RNCC: 5 | RNVC: 2

22 May 2009

5340-33-205-4303
Bumper

332054303
5041770: RNCC: 3 | RNVC: 2
1.143.31.069: RNCC: 5 | RNVC: 2

22 Sep 2006

5340-33-205-5855
Bow Handle

332055855
5030252: RNCC: 3 | RNVC: 2
8.237.004: RNCC: 5 | RNVC: 2

27 Dec 2006

5340-33-201-7293
Multiple Angle Bracket

332017293
NN60641G01: RNCC: 3 | RNVC: 2

15 Oct 2002

5340-33-208-6276
Rod End Clevis

332086276
L13004: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-33-206-9256
Loop Clamp

332069256
L18009: RNCC: 3 | RNVC: 2

19 Sep 2008

5340-33-158-9710
Manual Control Handle

331589710
2403.48: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-8696
Conjunto Soporte

332008696
319221: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-33-208-4796
Mounting Plate

332084796
J92563810-403: RNCC: 3 | RNVC: 2

13 Jul 2010

5340-33-002-8113
Tapon Guardapolvo

330028113
0004444225: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-005-3696
Luggage Handle

330053696
18.04075: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-33-208-6009
Mechanical Stop

332086009
R0114722: RNCC: 3 | RNVC: 2

20 Oct 2010

5340-33-116-2282
Manual Control Handle

331162282
561.34: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-8153
Double Angle Bracket

331078153
125244: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-33-200-3895
Spacing Threaded Standoff

332003895
CF 472 550 A: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-160-2413
Control Man Palanca

5340-33-108-5345
No Metalico Tope

331085345
9644.250.0862: RNCC: 3 | RNVC: 2
2510008537: RNCC: 5 | RNVC: 2
2510008537: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-209-1606
Mounting Plate

332091606
INS003002030050000: RNCC: 3 | RNVC: 2

6 Jul 2011

5340-33-155-7857
Double Angle Bracket

331557857
575585: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-209-7548
Access Cover

332097548
0149989100000: RNCC: 3 | RNVC: 2

22 Feb 2012

5340-33-157-7771
Double Angle Bracket

331577771
596174: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-0818
Metallic Solid Wheel

331030818
WK-L 1123.0105.2: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-126-3441
Spring Tension Clip

331263441
6.0690.37.3.0101: RNCC: 3 | RNVC: 2

4 Nov 1992

5340-33-000-5911
Manual Control Handle

330005911
5340000120: RNCC: 1 | RNVC: 2
5340-000120: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-005-3453
Hand Crank

330053453
R180303-45: RNCC: 3 | RNVC: 2

2 Jul 2001

5340-33-200-5707
Dust And Moisture Seal Protective Cap

332005707
1 480 508 038: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-33-201-4671
Double Angle Bracket

332014671
J92666161-001: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-33-116-1562
Manual Control Handle

331161562
4 200 877: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-126-3190
Double Angle Bracket

331263190
6.302.0.637.013.4: RNCC: 3 | RNVC: 2

3 Dec 1992

5340-33-207-8663
Wire Rope Terminal Retainer

332078663
CA98200-0001: RNCC: 3 | RNVC: 2

6 Nov 2009

5340-33-206-6280
Mounting Bracket

332066280
999098585: RNCC: 3 | RNVC: 2
999098585: RNCC: 5 | RNVC: 2

28 Mar 2008

5340-33-125-9228
Pol Protectora Tapa

5340-33-125-9386

5340-33-181-5775
Headless Straight Rod

331815775
-01201359-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-209-1548
Manual Control Handle

332091548
E-154: RNCC: 3 | RNVC: 2

1 Jul 2011

5340-33-202-7296
Strap Hinge Leaf

332027296
CF 630 038 A: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-33-201-4660
Double Angle Bracket

332014660
J57165870-004: RNCC: 3 | RNVC: 2

30 Jul 2002

5340-33-201-4799
Multiple Angle Bracket

332014799
J92661145-001: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-206-3012
Utility Resilient Mount

332063012
48512 FA001: RNCC: 3 | RNVC: 2
48512-FA001: RNCC: 5 | RNVC: 2

31 Oct 2007

5340-33-210-5150
Pipe Hanger

332105150
35-75427-0001: RNCC: 3 | RNVC: 2

23 Oct 2012

5340-33-202-5172
Double Angle Bracket

332025172
222421711-01: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-33-202-9928
Conjunto Placa De S

332029928
223552104-02: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-201-5551
Spacing Threaded Standoff

332015551
723591713-01: RNCC: 3 | RNVC: 2

3 Sep 2002

5340-33-126-3429
Helical Compression Spring Seat

331263429
6.305.0.342.004.4: RNCC: 3 | RNVC: 2

4 Nov 1992

5340-33-102-1902
Hand Crank

331021902
32330000110: RNCC: 3 | RNVC: 2
32330000110: RNCC: 3 | RNVC: 2
MCL-3-7/23: RNCC: 3 | RNVC: 2
MCL-3-7/23: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-003-4290
Packaging Container Fastener

330034290
SP159-335: RNCC: 3 | RNVC: 2
159-335: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-107-0309
Casement Fastener

331070309
2344457: RNCC: 3 | RNVC: 2

25 May 1999

5340-33-207-9664
Rod End Connector

332079664
PS10020-2-2RG: RNCC: 3 | RNVC: 2

15 Dec 2009

5340-33-207-7490
Bumper

332077490
MCG 11112-BS-100: RNCC: 3 | RNVC: 2

29 Sep 2009

5340-33-208-6082
Catch Strike

332086082
47418H01: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-33-158-5319
Manual Control Handle

331585319
-07700396-1: RNCC: 3 | RNVC: 2

12 Sep 1995

5340-33-207-1277
Door Closer

332071277
1FB03120: RNCC: 3 | RNVC: 2
9999-33-R27-3163: RNCC: 6 | RNVC: 9

26 Nov 2008

5340-33-002-2556
Dust And Moisture Seal Protective Cap-Plug

330022556
912-02806: RNCC: 3 | RNVC: 2

24 Mar 1994

5340-33-208-1073
Mounting Bracket

332081073
HC001-4: RNCC: 3 | RNVC: 2

23 Feb 2010

5340-33-207-6806
Expansion Shield

332076806
25106: RNCC: 3 | RNVC: 2

4 Aug 2009

5340-33-204-9919
Seal Retaining Plate

332049919
95-11533-0003: RNCC: 3 | RNVC: 2

24 Mar 2006

5340-33-210-5027
Corrosion Preventive Anode

332105027
Z-2.450NL: RNCC: 3 | RNVC: 2

18 Oct 2012

5340-33-207-8414
Threaded Rod End

332078414
0511606: RNCC: 3 | RNVC: 2
250320-12-001: RNCC: 5 | RNVC: 2

29 Oct 2009

5340-33-156-0283

5340-33-108-3486
Desbloqueo Palanca

5340-33-156-0422

5340-33-160-1844
Doble Angul Soporte

5340-33-108-2970
Montajes Soporte

5340-33-156-0272

5340-33-156-0351

5340-33-160-1999
Acceso Tapa

5340-33-207-2943
Nut And Bolt Retainer

332072943
310007: RNCC: 3 | RNVC: 2
J10096: RNCC: 5 | RNVC: 2
TN M6 0.5-1.5: RNCC: 5 | RNVC: 2

20 Feb 2009

5340-33-160-3873
No Meta Parachoques

331603873
5.484.441: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-6636
Spring Holder

331166636
15 M-28: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-4302
Butt Hinge Leaf

332074302
95-25927-0201: RNCC: 3 | RNVC: 2

6 Apr 2009

5340-33-208-9498
Mounting Bracket

332089498
4096-401: RNCC: 3 | RNVC: 2

18 May 2011

5340-33-210-2939
Butt Hinge Leaf

332102939
212-13104-06-1: RNCC: 3 | RNVC: 2

24 Jul 2012

5340-33-206-9396
Mounting Plate

332069396
PS-903305: RNCC: 3 | RNVC: 2

23 Sep 2008

5340-33-210-8087
Spring Holder

332108087
231147400: RNCC: 3 | RNVC: 2

11 Feb 2013

5340-33-201-1266
Dust And Moisture Seal Protective Cover

332011266
MAM-U-21-03-01: RNCC: 3 | RNVC: 2

14 May 2002

5340-33-103-1743
Dust And Moisture Seal Protective Cap

331031743
5365-000580: RNCC: 3 | RNVC: 2
1525: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-208-4139
Mechanic Equipment Hardware Kit

332084139
OUTT014: RNCC: 3 | RNVC: 2

25 May 2010

5340-33-208-7107
Webbing Strap

332087107
235-HK3-50+232-50 1850/600: RNCC: 3 | RNVC: 2

10 Jan 2011

5340-33-206-7723
Rod End Clevis

332067723
AH-CG-040: RNCC: 3 | RNVC: 2
AH-040: RNCC: 5 | RNVC: 2

13 Jun 2008

5340-33-204-6072
No Metalico Tope

332046072
86124-85C00: RNCC: 3 | RNVC: 2

2 Nov 2005

5340-33-001-1152
Guide

330011152
35-49104-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-116-2882
Candado

5340-33-155-2056

5340-33-203-6673
Helical Compression Spring Seat

332036673
5240.1: RNCC: 3 | RNVC: 2

23 Jul 2004

5340-33-161-2250
Manual Control Handle

331612250
U 0568: RNCC: 3 | RNVC: 2
U 0568: RNCC: 5 | RNVC: 2

5 Jul 1993

5340-33-201-0984
Positioning Thrust Stop

332010984
CE300026-0003: RNCC: 3 | RNVC: 2

30 Apr 2002

5340-33-208-0454
Mounting Bracket

332080454
DVP00016-0/0-M-08: RNCC: 3 | RNVC: 2

27 Jan 2010

5340-33-003-3829
Dust And Moisture Seal Boot

330033829
212-13430-11-1: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-33-106-6848
Manual Control Lever

331066848
4PP4122-1100P001: RNCC: 3 | RNVC: 2

18 Jan 1999

5340-33-002-1748
Hinge

330021748
35-33215-0007A01: RNCC: 3 | RNVC: 2

12 Jul 1993

5340-33-103-2424
Strap Hinge Leaf

331032424
1055-000335: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-0202

5340-33-126-3094
Acceso Tapa

5340-33-208-3253
Mounting Bracket

332083253
855000001E: RNCC: 3 | RNVC: 2

9 Apr 2010

5340-33-108-2046
No Metalico Tope

331082046
5501: RNCC: 3 | RNVC: 2

5 Feb 2001

5340-33-209-0376
Shipping And Storage Container Twistlock

332090376
AGC028315FDR: RNCC: 3 | RNVC: 2

26 May 2011

5340-33-202-9110
Dust And Moisture Seal Protective Plug

332029110
1025-900321: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-205-1621
Double Angle Bracket

332051621
CBD50514P21: RNCC: 3 | RNVC: 2

19 May 2006

5340-33-200-6539
Utility Resilient Mount

332006539
A 366 233 03 12: RNCC: 3 | RNVC: 2
92451366500: RNCC: 5 | RNVC: 2

20 Feb 2002

5340-33-102-0782
Manual Control Handle

331020782
D-2: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-210-4767
Webbing Strap

332104767
6462-2002-00: RNCC: 3 | RNVC: 2

9 Oct 2012

5340-33-207-5000
Access Cover

332075000
D57510: RNCC: 3 | RNVC: 2

18 May 2009

5340-33-104-0351
Juego Reparacion Di

331040351
631 330 14 49: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-6737
Multiple Angle Bracket

332026737
5034134: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-33-156-0312

5340-33-156-0401

5340-33-156-0458

5340-33-208-0665
Doorknob

332080665
113728501: RNCC: 3 | RNVC: 2
5340001796: RNCC: 5 | RNVC: 2

8 Feb 2010

5340-33-206-9210
Doorknob

332069210
235662: RNCC: 3 | RNVC: 2

17 Sep 2008

5340-33-209-6234
Mounting Plate

332096234
0750030911: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-33-004-4233
Spring Holder

330044233
11.11472-0053: RNCC: 3 | RNVC: 2
11.11472-0053: RNCC: 5 | RNVC: 2

25 Mar 1999

5340-33-201-4669
Double Angle Bracket

332014669
J92561155-001: RNCC: 3 | RNVC: 2

30 Jul 2002

5340-33-204-9920
Seal Retaining Plate

332049920
95-11533-0004: RNCC: 3 | RNVC: 2

24 Mar 2006

5340-33-003-2594
No Metalico Tope

330032594
95.00.01: RNCC: 3 | RNVC: 2

7 Mar 1997

5340-33-210-4561
Cover Strip

332104561
212-21141-12-1: RNCC: 3 | RNVC: 2

5 Oct 2012

5340-33-115-9293
Headless Straight Rod

331159293
DSH-136: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-005-2191
Hand Crank

330052191
125/4/23: RNCC: 3 | RNVC: 2

23 Jan 2001

5340-33-207-2242
Angle Bracket

332072242
10-A310508-0101: RNCC: 3 | RNVC: 2

22 Jan 2009

5340-33-004-4355
Headless Straight Rod

330044355
86.17.04.CT.50: RNCC: 3 | RNVC: 2

26 Mar 1999

5340-33-156-0411
Escutcheon Plate

331560411
-73882-01C00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-210-4327
Angle Bracket

332104327
185213: RNCC: 3 | RNVC: 2

2 Oct 2012

5340-33-208-7692
Pawl Fastener

332087692
333302: RNCC: 3 | RNVC: 2
V276: RNCC: 5 | RNVC: 2
C-CS0340-218: RNCC: 5 | RNVC: 2

17 Feb 2011

5340-33-208-1225
Angle Bracket

332081225
PN09-0017-M024: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-33-204-8948
No Metalico Tope

332048948
45149-12C00: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-187-2684
Nonmetallic Solid Wheel

331872684
9/150/GG/FS: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-208-7114
Webbing Strap

332087114
235-WH3-50+232-50 4600/3600: RNCC: 3 | RNVC: 2

10 Jan 2011

5340-33-204-4829
No Metalico Tope

332044829
PS-911875: RNCC: 3 | RNVC: 2

21 Sep 2005

5340-33-202-8390
Seal Retaining Plate

332028390
J57167790-005: RNCC: 3 | RNVC: 2

10 Nov 2003

5340-33-208-8642
Mounting Bracket

332088642
MAAC-500030406: RNCC: 3 | RNVC: 2

30 Mar 2011

5340-33-105-1375
Manual Control Lever

331051375
CMH95200-3/8-32: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-210-3987
Mounting Plate

332103987
CAN66011.1-08: RNCC: 3 | RNVC: 2

27 Sep 2012

5340-33-202-1800
Spacing Threaded Standoff

332021800
M.A.S. 841-26.19-25: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-33-125-9237
Orificio Acce Marco

5340-33-126-9866
Pol Protectora Tapa

5340-33-156-0385

5340-33-156-0372

5340-33-205-5216
Dust And Moisture Seal Protective Cap-Plug

332055216
4312-712-6899E: RNCC: 3 | RNVC: 2

29 Nov 2006

5340-33-105-1376
Spring Tension Clip

331051376
CMH95200-3/8-34: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-210-4782
Mounting Plate

332104782
MAM-HE-32-00-12: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-33-209-4996
Mounting Bracket

332094996
C-9701: RNCC: 3 | RNVC: 2

12 Jan 2012

5340-33-160-2532
Terminal Horquilla

5340-33-003-1688
Metalico Tope

330031688
01.09.1007: RNCC: 3 | RNVC: 2

27 Apr 1996

5340-33-209-0944
Access Cover

332090944
5051735: RNCC: 3 | RNVC: 2

7 Jun 2011

5340-33-160-2798
Muelle Helico Reten

5340-33-202-4059
Varilla Roscada

332024059
35-94070-2103: RNCC: 3 | RNVC: 2

12 May 2003

5340-33-103-8441
Horquilla Y Nivel T

331038441
9505-1-3-00: RNCC: 3 | RNVC: 2

12 Sep 1995

5340-33-207-4119
Mounting Plate

332074119
PS-310229: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-33-208-4334
Dust And Moisture Seal Protective Cap-Plug

332084334
DMZ1196-AD: RNCC: 3 | RNVC: 2

14 Jun 2010

5340-33-210-7765
Butt Hinge Leaf

332107765
212-82210-02-1: RNCC: 3 | RNVC: 2

8 Feb 2013

5340-33-208-3243
Access Cover

332083243
C0AC32TN000: RNCC: 3 | RNVC: 2
BT-HM 32D2-1510.1: RNCC: 5 | RNVC: 2
BAC0AC32TN000SE: RNCC: 5 | RNVC: 2

9 Apr 2010

5340-33-156-2205
Double Angle Bracket

331562205
-11341-G9600: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-001-3644
Spring Holder

330013644
92018507: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-209-0814
Handwheel

332090814
1025901347: RNCC: 3 | RNVC: 2
9682.101.1257: RNCC: 5 | RNVC: 2

1 Jun 2011

5340-33-209-2268
Double Angle Bracket

332092268
5052042: RNCC: 3 | RNVC: 2

4 Aug 2011

5340-33-209-4355
Access Cover

332094355
0738032200: RNCC: 3 | RNVC: 2

20 Dec 2011

5340-33-160-3892
No Metalico Tope

331603892
5.447.904: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-6158
Protector De Pantal

332046158
5030520: RNCC: 3 | RNVC: 2

4 Nov 2005

5340-33-126-0101
Presilla Abrazadera

5340-33-125-7421
Angular Soporte

5340-33-125-7437
Acceso Tapa

5340-33-125-7422
Angular Soporte

5340-33-125-6462

5340-33-160-3016
Acceso Tapa

5340-33-125-9227
Pol Protectora Tapa

5340-33-202-4593
No Metalico Tope

332024593
M200114: RNCC: 3 | RNVC: 2

19 Jun 2003

5340-33-001-2293
Manual Control Handle

330012293
35-81999-0201: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-201-2634
Utility Resilient Mount

332012634
220001: RNCC: 3 | RNVC: 2

11 Jun 2002

5340-33-181-3575
Manual Control Lever

331813575
-01700402-1: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-207-8583
Loop Clamp

332078583
J28665280-401: RNCC: 3 | RNVC: 2

4 Nov 2009

5340-33-206-3584
Helical Compression Spring Seat

332063584
44043 L0100: RNCC: 3 | RNVC: 2
44043-L0100: RNCC: 5 | RNVC: 2

28 Nov 2007

5340-33-160-2983
Angular Soporte

5340-33-211-2976
Double Angle Bracket

332112976
TP252535: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-33-201-4735
Nut And Bolt Retainer

332014735
J57165110-002: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-204-6857
Dust And Moisture Seal Protective Cap

332046857
PS-210441: RNCC: 3 | RNVC: 2

5 Dec 2005

5340-33-200-0118
Multiple Angle Bracket

332000118
NN60155P01: RNCC: 3 | RNVC: 2

24 Sep 2001

5340-33-004-8747
Multiple Angle Bracket

330048747
NN60271G01: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-33-207-6747
Locking Stay

332076747
R0093324: RNCC: 3 | RNVC: 2

3 Aug 2009

5340-33-207-4140
Safety Cable Kit

332074140
30941160: RNCC: 3 | RNVC: 2

1 Apr 2009

5340-33-210-5564
Angle Bracket

332105564
188038002-1: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-33-126-0428
Acceso Tapa

5340-33-155-0770

5340-33-155-8734

5340-33-210-0597
Webbing Strap

332100597
235-H2-50+232-50 2500/1000: RNCC: 3 | RNVC: 2

18 May 2012

5340-33-208-7129
Lock Bolt

332087129
400.116.000: RNCC: 3 | RNVC: 2
900.803.028-ITEM28-RIVET: RNCC: 5 | RNVC: 2

11 Jan 2011

5340-33-208-6379
Mounting Bracket

332086379
R0106421: RNCC: 3 | RNVC: 2

12 Nov 2010

5340-33-208-4439
Mounting Plate

332084439
5049815: RNCC: 3 | RNVC: 2

25 Jun 2010

5340-33-000-6458

5340-33-205-2175
Clip Retainer Plate

332052175
CBD50542P38: RNCC: 3 | RNVC: 2

23 Jun 2006

5340-33-201-7294
Double Angle Bracket

332017294
NN60531P01: RNCC: 3 | RNVC: 2

15 Oct 2002

5340-33-181-9373
Helical Compression Spring Retainer

331819373
-33157122: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-204-5694
Manual Control Lever

332045694
041501: RNCC: 3 | RNVC: 2

18 Oct 2005

5340-33-206-7757
Access Cover

332067757
47563: RNCC: 3 | RNVC: 2
4320-33-M04-0853: RNCC: 6 | RNVC: 9

16 Jun 2008

5340-33-190-5560
Sealing Plug Assembly

331905560
K43175080-001: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-005-3979
No Metalico Tope

330053979
SEGOQUI-16/10-06: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-33-200-0846
Mechanic Equipment Hardware Kit

332000846
7054.252.1420: RNCC: 3 | RNVC: 2
2540700048: RNCC: 5 | RNVC: 2

5 Oct 2001

5340-33-206-0403
Double Angle Bracket

332060403
NN60961P01: RNCC: 3 | RNVC: 2

10 Jul 2007

5340-33-206-0473
Utility Resilient Mount

332060473
M18074: RNCC: 3 | RNVC: 2

12 Jul 2007

5340-33-160-7495
Nut And Bolt Retainer

331607495
79.03.053.526: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-203-5863
Double Angle Bracket

332035863
876284: RNCC: 3 | RNVC: 2

2 Jun 2004

5340-33-160-3902
No Metalico Tope

331603902
91.513.661: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-9911
Dust And Moisture Seal Protective Cover

332029911
AED-C-2002-01-026: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-154-9718
Window Regulator Handle

331549718
72-2-284: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-207-9214
Rod End Clevis

332079214
195061: RNCC: 3 | RNVC: 2

27 Nov 2009

5340-33-003-5831
Soporte Arma

330035831
1055-001209: RNCC: 3 | RNVC: 2

16 Feb 1998

5340-33-181-3531
Dust And Moisture Seal Protective Cap

331813531
-16100121-0: RNCC: 3 | RNVC: 2
-6100121-0: RNCC: 5 | RNVC: 2

20 Jul 1995

5340-33-156-0208

5340-33-155-1887

5340-33-154-8451

5340-33-126-1604
Acceso Tapa

5340-33-126-5945
Acceso Tapa

5340-33-154-9911

5340-33-155-8736

5340-33-160-2533
Terminal Horquilla

5340-33-208-6989
Butt Hinge

332086989
242000103-001: RNCC: 3 | RNVC: 2

23 Dec 2010

5340-33-208-6454
Loop Clamp

332086454
1900: RNCC: 3 | RNVC: 2
BR-48-ST: RNCC: 5 | RNVC: 2
MR-1001: RNCC: 5 | RNVC: 2

19 Nov 2010

5340-33-208-0040
Padlock

332080040
300-25-BL: RNCC: 3 | RNVC: 2

8 Jan 2010

5340-33-208-6459
Butt Hinge Leaf

332086459
95-82229-0103: RNCC: 3 | RNVC: 2

19 Nov 2010

5340-33-210-6427
Multiple Angle Bracket

332106427
TP201110: RNCC: 3 | RNVC: 2

4 Dec 2012

5340-33-209-7060
Angle Bracket

332097060
TP251461: RNCC: 3 | RNVC: 2

10 Feb 2012

5340-33-206-7772
Angle Bracket

332067772
PR0007: RNCC: 3 | RNVC: 2

17 Jun 2008

5340-33-116-2656
Angular Soporte

5340-33-209-2299
Cushioning Pad

332092299
5052476: RNCC: 3 | RNVC: 2

9 Aug 2011

5340-33-155-1894
Acero Puas

331551894
PUAS DE ACERO: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-206-7552
Access Cover

332067552
PS-210585: RNCC: 3 | RNVC: 2

30 May 2008

5340-33-145-5653
Manual Control Handle

331455653
70-543: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-209-9562
Mounting Bracket

332099562
231165900: RNCC: 3 | RNVC: 2

10 Apr 2012

5340-33-115-5750
Tornillo Tuerca Y A

331155750
DIN-933-934-125-M12: RNCC: 3 | RNVC: 2

13 Sep 1995

5340-33-209-6720
Mounting Bracket

332096720
ST-0019: RNCC: 3 | RNVC: 2

30 Jan 2012

5340-33-004-3935
Headless Straight Rod

330043935
CA30500-18: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-33-207-5624
Mounting Plate

332075624
CF 819 707 A: RNCC: 3 | RNVC: 2

24 Jun 2009

5340-33-107-1323
Strap Hinge Leaf

331071323
61060280102: RNCC: 3 | RNVC: 2
PCAMI/RP/0306028012: RNCC: 6 | RNVC: 9

30 Jun 1999

5340-33-201-3653
Mechanic Equipment Hardware Kit

332013653
24.21: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-33-211-1511
Window Retaining Plate

332111511
VR01240100: RNCC: 3 | RNVC: 2
VR01240100: RNCC: 3 | RNVC: 2

28 Jun 2013

5340-33-208-6717
Access Cover

332086717
ME201179: RNCC: 3 | RNVC: 2
ME201179: RNCC: 5 | RNVC: 2

30 Nov 2010

5340-33-126-9726
Union Placa

5340-33-126-9974
Acceso Tapa

5340-33-114-4965

5340-33-108-2967
Montajes Soporte

5340-33-108-2966
Montajes Soporte

5340-33-160-2141
Presilla Abrazadera

5340-33-160-3885
No Metalico Tope

331603885
5.420.291: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-102-5899
Dust And Moisture Seal Protective Plug

331025899
9358-01-24: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-208-5294
Aluminum Mesh

332085294
ASTRO-STRIKE-SCR-ALO16-CX: RNCC: 3 | RNVC: 2

8 Sep 2010

5340-33-154-0288
Helical Compression Spring Seat

331540288
807994: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-108-4409
Manual Control Lever

331084409
0639.250.4760: RNCC: 3 | RNVC: 2
2540000735: RNCC: 5 | RNVC: 2
2540000735: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-201-4444
Electronic Equipment Hardware Kit

332014444
W290675300800: RNCC: 3 | RNVC: 2

22 Jul 2002

5340-33-004-7073
Double Angle Bracket

330047073
NN60150: RNCC: 1 | RNVC: 2
NN60150P01: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-33-209-5485
Lock Bar

332095485
INS5589/001: RNCC: 3 | RNVC: 2

17 Jan 2012

5340-33-207-3435
Bow Handle

332073435
PS-912339: RNCC: 3 | RNVC: 2

9 Mar 2009

5340-33-004-5589
Seal Retaining Plate

330045589
NN51395P08: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-33-107-2847
Dust And Moisture Seal Protective Plug

331072847
122033: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-33-202-3069
Manual Control Lever

332023069
07147804: RNCC: 3 | RNVC: 2
27483107: RNCC: 5 | RNVC: 2

1 Apr 2003

5340-33-166-0306
Double Angle Bracket

331660306
1660301: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-105-5560
Multiple Angle Bracket

331055560
756687: RNCC: 3 | RNVC: 2

9 May 1996

5340-33-200-1707
Seal Retaining Plate

332001707
J52466002-001: RNCC: 3 | RNVC: 2

29 Oct 2001

5340-33-206-9714
Spacing Threaded Standoff

332069714
F5-20206: RNCC: 3 | RNVC: 2

30 Sep 2008

5340-33-208-8062
Access Cover

332088062
4069-101: RNCC: 3 | RNVC: 2

4 Mar 2011

5340-33-180-6757
Anillo Sujecion

331806757
217489: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-160-3820
Spring Tension Clip

331603820
79.03.079.100: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-158-5596
Dust And Moisture Seal Protective Cap

331585596
-11300242-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-3723
Multiple Angle Bracket

331613723
616758: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-115-9258
Dust And Moisture Seal Protective Cap

331159258
01.00734/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-8953
No Metalico Tope

332048953
09320-09018: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-160-2131
Presilla Abrazadera

5340-33-160-2011
Acceso Tapa

5340-33-208-6376
Mounting Bracket

332086376
R0109372: RNCC: 3 | RNVC: 2

12 Nov 2010

5340-33-001-6752
Nonmetallic Solid Wheel

330016752
35-23521-0201-00: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-157-8725
Double Angle Bracket

331578725
815118: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-210-7489
Dust And Moisture Seal Protective Cap

332107489
212-83226-01-1: RNCC: 3 | RNVC: 2

3 Feb 2013

5340-33-126-1603
Acceso Tapa

5340-33-125-9276

5340-33-002-2575
Nut And Bolt Retainer

330022575
1010-00003: RNCC: 3 | RNVC: 2

24 Mar 1994

5340-33-201-8852
Double Angle Bracket

332018852
319889: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-33-155-7841
Double Angle Bracket

331557841
511414: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-156-2352
Double Angle Bracket

331562352
-46379-G9601: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-206-9963
Double Angle Bracket

332069963
TP251318: RNCC: 3 | RNVC: 2

6 Oct 2008

5340-33-208-7013
Mounting Bracket

332087013
5049469: RNCC: 3 | RNVC: 2

4 Jan 2011

5340-33-004-6066
Seal Retaining Plate

330046066
234734: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-33-204-4307
Manual Control Handle

332044307
500005557: RNCC: 3 | RNVC: 2

14 Sep 2005

5340-33-208-4472
Mounting Bracket

332084472
B-V-HE-09: RNCC: 3 | RNVC: 2
B-V-HE-09: RNCC: 5 | RNVC: 2

29 Jun 2010

5340-33-208-8772
Mounting Plate

332088772
INS003134060050000: RNCC: 3 | RNVC: 2

11 Apr 2011

5340-33-154-6486

5340-33-209-5546
Mounting Bracket

332095546
0738049600: RNCC: 3 | RNVC: 2

17 Jan 2012

5340-33-204-8005
Multiple Angle Bracket

332048005
PS-910266: RNCC: 3 | RNVC: 2

26 Jan 2006

5340-33-207-0505
Manual Control Handle

332070505
9170 9232 90: RNCC: 3 | RNVC: 2

24 Oct 2008

5340-33-207-6405
Mounting Plate

332076405
R0083000: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-160-3636
Helical Compression Spring Seat

331603636
1750030: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-0283
Helical Compression Spring Seat

331540283
699726: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-126-2993
Acceso Tapa

5340-33-160-2008
Acceso Tapa

5340-33-126-0433
Acceso Tapa

5340-33-126-0163
Acceso Tapa

5340-33-201-9520
Hand Crank

332019520
723591328-02: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-33-125-6449

5340-33-201-7704
Multiple Angle Bracket

332017704
7055.252.0061: RNCC: 3 | RNVC: 2
2510701511: RNCC: 5 | RNVC: 2

22 Oct 2002

5340-33-156-2370
Double Angle Bracket

331562370
-95835-G9500: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-126-2998
Acceso Tapa

5340-33-156-0303

5340-33-108-2974
Montajes Placa

5340-33-156-0271

5340-33-108-2227
Metallic Solid Wheel

331082227
9644.101.0240: RNCC: 3 | RNVC: 2
1005006355: RNCC: 5 | RNVC: 2
1005006355: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-005-0138
Dust And Moisture Seal Boot

330050138
77 00 557 797: RNCC: 3 | RNVC: 2
7700557797: RNCC: 3 | RNVC: 2

3 May 2000

5340-33-157-7662
Helical Compression Spring Seat

331577662
567623: RNCC: 3 | RNVC: 2
567623: RNCC: 3 | RNVC: 2
81100050: RNCC: 5 | RNVC: 9

24 Jul 1995

5340-33-200-0762
Multiple Angle Bracket

332000762
7054.252.0327: RNCC: 3 | RNVC: 2
2510701151: RNCC: 5 | RNVC: 2

4 Oct 2001

5340-33-187-2688
Nonmetallic Solid Wheel

331872688
172/200: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-206-5121
Hand Crank

332065121
0555003500: RNCC: 3 | RNVC: 2

12 Feb 2008

5340-33-207-6913
Mounting Plate

332076913
5040815: RNCC: 3 | RNVC: 2
1.141.72.043: RNCC: 5 | RNVC: 2

10 Aug 2009

5340-33-207-7503
Bridge Clamp

332077503
5045436: RNCC: 3 | RNVC: 2
1.150.11.010: RNCC: 5 | RNVC: 2

30 Sep 2009

5340-33-102-0379
Helical Compression Spring Seat

331020379
2510-000118: RNCC: 3 | RNVC: 2
411.090.0492: RNCC: 5 | RNVC: 2
2510000118: RNCC: 5 | RNVC: 2

2 Jan 1995

5340-33-115-9105
Helical Compression Spring Retainer

331159105
14771-ZE1-000: RNCC: 3 | RNVC: 2

13 Nov 1992

5340-33-200-0966
Manual Control Lever

332000966
50.41.038.A: RNCC: 3 | RNVC: 2

5 Oct 2001

5340-33-156-0386

5340-33-156-0349

5340-33-156-0362

5340-33-207-0611
Double Angle Bracket

332070611
INS003024010020801: RNCC: 3 | RNVC: 2

29 Oct 2008

5340-33-208-9043
Mounting Plate

332089043
B044 3857: RNCC: 3 | RNVC: 2

25 Apr 2011

5340-33-209-1712
Mounting Plate

332091712
0750025930: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-33-209-5452
Access Cover

332095452
9743.100.0902: RNCC: 3 | RNVC: 2
5895900036: RNCC: 5 | RNVC: 2

17 Jan 2012

5340-33-204-8966
No Metalico Tope

332048966
17787-19A00: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-160-3879
No Metalico Tope

331603879
79.10.034.845: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-210-6187
Webbing Strap

332106187
0308338: RNCC: 3 | RNVC: 2

30 Nov 2012

5340-33-209-4001
Rod End Clevis

332094001
0738025100: RNCC: 3 | RNVC: 2

1 Dec 2011

5340-33-004-2877
Headless Grooved Rod

330042877
PCAMI/RP/0306126110/N: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-208-5766
Mechanical Stop

332085766
0830287001080: RNCC: 3 | RNVC: 2

6 Oct 2010

5340-33-207-8174
Mounting Bracket

332078174
R0095529: RNCC: 3 | RNVC: 2

23 Oct 2009

5340-33-208-1687
Dust And Moisture Seal Protective Plug

332081687
TSRD-01-998: RNCC: 3 | RNVC: 2

15 Mar 2010

5340-33-205-4294
Double Angle Bracket

332054294
5040703: RNCC: 3 | RNVC: 2
1.143.91.004: RNCC: 5 | RNVC: 2

22 Sep 2006

5340-33-188-9849
Headless Straight Rod

331889849
3 170 216: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-105-7554
Manual Control Handle

331057554
10.12.14.0092.0: RNCC: 3 | RNVC: 2

1 Jun 1996

5340-33-126-3424
Helical Compression Spring Seat

331263424
9.1690.05.2.0307: RNCC: 3 | RNVC: 2

4 Nov 1992

5340-33-201-3947
Multiple Angle Bracket

332013947
A2811203-403: RNCC: 3 | RNVC: 2

5 Jul 2002

5340-33-108-2125
Metallic Solid Wheel

331082125
9644.100.0090: RNCC: 3 | RNVC: 2
1005005119: RNCC: 5 | RNVC: 2
1005005119: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-210-5141
Webbing Strap

332105141
MES-000422: RNCC: 3 | RNVC: 2

22 Oct 2012

5340-33-103-1735
Helical Compression Spring Retainer

331031735
1005-004412: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-33-206-6123
Mounting Bracket

332066123
CF 328 547 -U: RNCC: 3 | RNVC: 2

17 Mar 2008

5340-33-000-6449
Helical Compression Spring Seat

330006449
126432 95: RNCC: 1 | RNVC: 2

15 Jun 1988

5340-33-000-2863
Helical Compression Spring Seat

330002863
649144: RNCC: 1 | RNVC: 2
649144: RNCC: 3 | RNVC: 2

22 May 1987

5340-33-154-7228
Helical Compression Spring Seat

331547228
197140: RNCC: 3 | RNVC: 2
197140: RNCC: 3 | RNVC: 2
0079052246: RNCC: 5 | RNVC: 2

2 Oct 1990

5340-33-161-3665
Rollo Polietileno

331613665
585742: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-161-4366
Double Angle Bracket

331614366
203149: RNCC: 3 | RNVC: 2

21 Sep 1995

5340-33-000-2778
Double Angle Bracket

330002778
648460: RNCC: 1 | RNVC: 2

22 May 1987

5340-33-208-6666
Retaining Strap

332086666
11020401: RNCC: 3 | RNVC: 2

29 Nov 2010

5340-33-208-4457
Access Cover

332084457
0400475: RNCC: 3 | RNVC: 2

28 Jun 2010

5340-33-004-8203
Double Angle Bracket

330048203
NN60070P01: RNCC: 3 | RNVC: 2

22 Nov 1999

5340-33-160-6130
Window Regulator Handle

331606130
95.481.206: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-2231
Perforated Panel Accessory

332062231
PCMSABMR086: RNCC: 3 | RNVC: 2

3 Oct 2007

5340-33-003-2906
Mechanic Equipment Hardware Kit

330032906
221024535: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-209-6240
Mounting Plate

332096240
0750032111: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-33-116-2378
Spring Holder

331162378
105.741.11: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-8484
Window Regulator Handle

330028484
SE138521440A: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-202-8743
Seal Retaining Plate

332028743
VR01461030: RNCC: 3 | RNVC: 2

17 Nov 2003

5340-33-207-9659
Rod End Connector

332079659
PS10020-2-1RX: RNCC: 3 | RNVC: 2

15 Dec 2009

5340-33-210-6179
Mounting Bracket

332106179
27.04.011: RNCC: 3 | RNVC: 2

30 Nov 2012

5340-33-004-6465
Dust And Moisture Seal Protective Cap

330046465
214649: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-157-7997
Double Angle Bracket

331577997
682994: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-8442
Cuerpo-Eje

331038442
9505-3-1-00: RNCC: 3 | RNVC: 2

12 Sep 1995

5340-33-000-0772

5340-33-209-1460
Mounting Plate

332091460
0750038241: RNCC: 3 | RNVC: 2

28 Jun 2011

5340-33-207-7221
Dust And Moisture Seal Protective Cover

332077221
5049177: RNCC: 3 | RNVC: 2

16 Sep 2009

5340-33-206-9350
Angle Bracket

332069350
980550: RNCC: 3 | RNVC: 2

22 Sep 2008

5340-33-156-0308

5340-33-161-1346
Flush Lock

331611346
05.215.005.93: RNCC: 3 | RNVC: 2

12 Sep 1995

5340-33-207-6435
Mounting Bracket

332076435
R0096649: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-204-7182
Dust And Moisture Seal Protective Cap-Plug

332047182
PS-911777: RNCC: 3 | RNVC: 2

16 Dec 2005

5340-33-209-2730
Spring Tension Clip

332092730
0750 27: RNCC: 3 | RNVC: 2
5340900508: RNCC: 5 | RNVC: 2

21 Sep 2011

5340-33-206-7014
Mounting Actuator Plate

332067014
PS-910495: RNCC: 3 | RNVC: 2

8 May 2008

5340-33-209-2053
Nonmetallic Solid Wheel

332092053
35-25127-6101: RNCC: 3 | RNVC: 2

20 Jul 2011

5340-33-206-3557
Manual Control Handle

332063557
18415 0G000: RNCC: 3 | RNVC: 2
18415-0G000: RNCC: 5 | RNVC: 2

27 Nov 2007

5340-33-209-3995
Mounting Plate

332093995
0738004740: RNCC: 3 | RNVC: 2

1 Dec 2011

5340-33-210-6497
Safety Cable Kit

332106497
CS06000020: RNCC: 3 | RNVC: 2

13 Dec 2012

5340-33-207-7943
Mounting Plate

332077943
95-94202-0401: RNCC: 3 | RNVC: 2

19 Oct 2009

5340-33-211-4498
Escutcheon Plate

332114498
212-81201-07-1: RNCC: 3 | RNVC: 2

25 Oct 2013

5340-33-205-5511
Multiple Angle Bracket

332055511
51987-002: RNCC: 3 | RNVC: 2

15 Dec 2006

5340-33-158-1879
Clip Retainer Plate

331581879
618769: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-125-8113
Terminal Conector

5340-33-202-8389
Seal Retaining Plate

332028389
J57167285-005: RNCC: 3 | RNVC: 2

10 Nov 2003

5340-33-208-2666
Expansion Shield

332082666
3403: RNCC: 3 | RNVC: 2

5 Apr 2010

5340-33-126-6045
Mending Plate

331266045
C22234-A1000-C175: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-181-8892
Double Angle Bracket

331818892
-16300217-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-188-8009
Dust And Moisture Seal Protective Cap

331888009
3 170 402: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-211-2048
Utility Resilient Mount

332112048
212-81366-3: RNCC: 3 | RNVC: 2

8 Jul 2013

5340-33-161-5305
Manual Control Lever

331615305
313518: RNCC: 3 | RNVC: 2
313518: RNCC: 5 | RNVC: 2

20 Jul 1995

5340-33-200-4719
Window Regulator Handle

332004719
203751: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-33-202-6009
Double Angle Bracket

332026009
757826: RNCC: 3 | RNVC: 2

3 Sep 2003

5340-33-207-6407
Mounting Plate

332076407
R0094849: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-33-004-5592
Seal Retaining Plate

330045592
NN51410P01: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-33-102-5713
P Placa De Montaje

331025713
612-F: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-5482
Key Blank

332075482
JMA RO-8D: RNCC: 3 | RNVC: 2

16 Jun 2009

5340-33-116-1348
Dust And Moisture Seal Protective Cap

331161348
BA-18895000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-105-2930
Spring Tension Clip

331052930
SS-06-0309A: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-207-5522
Pipe Hanger

332075522
CABM48300100201: RNCC: 3 | RNVC: 2

18 Jun 2009

5340-33-182-1270
Window Regulator Handle

331821270
00.178.921.00: RNCC: 3 | RNVC: 2

12 Jun 1995

5340-33-116-2476
Helical Compression Spring Seat

331162476
4081A00710: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-210-6908
Mounting Bracket

332106908
PCMSABMR171: RNCC: 3 | RNVC: 2

28 Dec 2012

5340-33-107-8958
Spring Holder

331078958
MTU0115-101-07: RNCC: 3 | RNVC: 2

13 Sep 2000

5340-33-210-4429
Plug Button

332104429
AC200157: RNCC: 3 | RNVC: 2

2 Oct 2012

5340-33-208-7555
Mounting Bracket

332087555
R0115593: RNCC: 3 | RNVC: 2

3 Feb 2011

5340-33-208-8096
Mounting Bracket

332088096
4307-101: RNCC: 3 | RNVC: 2

4 Mar 2011

5340-33-000-6457
Helical Compression Spring Seat

330006457
180903 95: RNCC: 1 | RNVC: 2

15 Jun 1988

5340-33-208-6084
Catch Strike

332086084
47417H01: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-33-004-5254
Dust And Moisture Seal Protective Plug

330045254
07905009-0: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-209-5443
Mounting Bracket

332095443
E2 2600080280: RNCC: 3 | RNVC: 2
2990900114: RNCC: 5 | RNVC: 2

17 Jan 2012

5340-33-207-8686
Dust And Moisture Seal Protective Cover

332078686
CALE-106-004-00: RNCC: 3 | RNVC: 2

6 Nov 2009

5340-33-004-7075
Double Angle Bracket

330047075
NN60157: RNCC: 1 | RNVC: 2
NN60157G01: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-33-004-6463
Dust And Moisture Seal Protective Cap

330046463
14757012: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-004-8953
Multiple Angle Bracket

330048953
NN60185G01: RNCC: 3 | RNVC: 2

28 Jan 2000

5340-33-000-4590
Tint.De Amarre Arg.

330004590
254CDA-1B: RNCC: 3 | RNVC: 2

28 Jan 1988

5340-33-207-9799
Snap Hook

332079799
420/12-T-1F: RNCC: 3 | RNVC: 2
YXX42012AL00026: RNCC: 5 | RNVC: 2

17 Dec 2009

5340-33-209-8146
Dust And Moisture Seal Protective Plug Set

332098146
CTP60120G201: RNCC: 3 | RNVC: 2
CTP60120G101: RNCC: 5 | RNVC: 9

9 Mar 2012

5340-33-209-9000
Retaining Strap

332099000
706200021: RNCC: 3 | RNVC: 2

30 Mar 2012

5340-33-207-0069
Mending Plate

332070069
INS003024010010600: RNCC: 3 | RNVC: 2

8 Oct 2008

5340-33-201-3404
No Metalico Tope

332013404
01.942.00: RNCC: 3 | RNVC: 2

27 Jun 2002

5340-33-210-0931
Double Angle Bracket

332100931
GU1M80029A: RNCC: 3 | RNVC: 2

22 May 2012

5340-33-209-6132
Mounting Plate

332096132
0738150590: RNCC: 3 | RNVC: 2

20 Jan 2012

5340-33-200-7763
Dust And Moisture Seal Protective Cap

332007763
BCL-020-A1I.30A: RNCC: 3 | RNVC: 2

11 Mar 2002

5340-33-209-4059
Cover Strip

332094059
DF 304 213 A: RNCC: 3 | RNVC: 2

1 Dec 2011

5340-33-206-6520
Mounting Plate

332066520
280.25.150.09012: RNCC: 3 | RNVC: 2

11 Apr 2008

5340-33-158-1506
Dust And Moisture Seal Protective Cap

331581506
620180: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-156-2359
Double Angle Bracket

331562359
-16574-G3400: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-204-5488
Dust And Moisture Seal Protective Plug

332045488
D0941411557: RNCC: 3 | RNVC: 2

11 Oct 2005

5340-33-106-1137
Dust And Moisture Seal Protective Cap-Plug

331061137
191790: RNCC: 3 | RNVC: 2

18 Mar 1997

5340-33-158-9880
Manual Control Handle

331589880
00.151.800.XX: RNCC: 3 | RNVC: 2

12 Jun 1995

5340-33-209-1669
Retaining Strap

332091669
0742000520: RNCC: 3 | RNVC: 2

6 Jul 2011

5340-33-161-2608
Multiple Angle Bracket

331612608
318836: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-33-200-2953
Casement Fastener

332002953
196915: RNCC: 3 | RNVC: 2

30 Nov 2001

5340-33-206-7079
Extension Drawer Slide Section

332067079
328.00.01: RNCC: 3 | RNVC: 2

9 May 2008

5340-33-210-8561
Hydraulic Ram Support

332108561
0750226600: RNCC: 3 | RNVC: 2

10 Mar 2013

5340-33-114-4859
Luggage Handle

331144859
5.50 TTG-119: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-102-1647
Helical Compression Spring Seat

331021647
42120000340: RNCC: 3 | RNVC: 2
MB57-1-34: RNCC: 3 | RNVC: 2
42120000340: RNCC: 3 | RNVC: 2
MB57-1-34: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-209-0256
Mounting Plate

332090256
AGC017405C0R: RNCC: 3 | RNVC: 2

26 May 2011

5340-33-204-7908
Campana

332047908
5038331: RNCC: 3 | RNVC: 2
1.124.11.075: RNCC: 5 | RNVC: 2

24 Jan 2006

5340-33-202-4894
Fusible Torque Meca

332024894
2.135.145-A: RNCC: 3 | RNVC: 2
5033576: RNCC: 5 | RNVC: 2

14 Jul 2003

5340-33-208-7116
Webbing Strap

332087116
235-WH3-50+232-50 800/450: RNCC: 3 | RNVC: 2

10 Jan 2011

5340-33-114-4866
Chapa Tambor

331144866
3.50 TTG-8: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-207-1462
Mechanical Stop

332071462
105130: RNCC: 3 | RNVC: 2

2 Dec 2008

5340-33-105-1063
Double Angle Bracket

331051063
42320010010: RNCC: 3 | RNVC: 2
42320010010: RNCC: 3 | RNVC: 2
VB-400-C-0110: RNCC: 6 | RNVC: 9

16 Sep 1997

5340-33-002-1200
Double Angle Bracket

330021200
2510-003675: RNCC: 3 | RNVC: 2

7 Jun 1993

5340-33-002-2042
Rod End Connector

330022042
CA25000-05-1: RNCC: 3 | RNVC: 2

4 Aug 1993

5340-33-204-1070
Manual Control Handle

332041070
064.19.11.M02: RNCC: 3 | RNVC: 2

29 Mar 2005

5340-33-201-3945
Multiple Angle Bracket

332013945
A2811102-403: RNCC: 3 | RNVC: 2

5 Jul 2002

5340-33-210-5149
Access Cover

332105149
35-11390-0504-53: RNCC: 3 | RNVC: 2

23 Oct 2012

5340-33-207-7860
Mounting Bracket

332077860
SPN1111121-501: RNCC: 3 | RNVC: 2

16 Oct 2009

5340-33-107-9386
No Metalico Tope

331079386
SE127162122A: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-33-206-1560
Shipping Container Bracket

332061560
PS-911936: RNCC: 3 | RNVC: 2

7 Sep 2007

5340-33-156-0423

5340-33-114-4945

5340-33-210-2948
Butt Hinge Leaf

332102948
212-14001-37-1: RNCC: 3 | RNVC: 2

24 Jul 2012

5340-33-208-4428
Mounting Plate

332084428
INS003112990020000: RNCC: 3 | RNVC: 2

25 Jun 2010

5340-33-205-0736
Spring Tension Clip

332050736
51288-29F20: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-33-202-5728
Utility Resilient Mount

332025728
899734-8: RNCC: 3 | RNVC: 2

21 Aug 2003

5340-33-158-5340
Headless Grooved Rod

331585340
-239734-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-208-1147
Access Cover

332081147
3971-101: RNCC: 3 | RNVC: 2

25 Feb 2010

5340-33-145-5183
Rueda Orie Soporte

331455183
ROLLIBOX: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-33-115-9107
Helical Compression Spring Retainer

331159107
14771-ZE2-000: RNCC: 3 | RNVC: 2

13 Nov 1992

5340-33-207-7427
Lock-Release Lever

332077427
AFE.GN 101-25.M12-SW: RNCC: 3 | RNVC: 2
AFE.GN 101-25.M10-SW: RNCC: 5 | RNVC: 2

28 Sep 2009

5340-33-160-2006
Acceso Tapa

5340-33-160-1996
Acceso Tapa

5340-33-160-1998
Acceso Tapa

5340-33-210-5999
Webbing Strap

332105999
0108516: RNCC: 3 | RNVC: 2

26 Nov 2012

5340-33-210-2557
Access Door Hinge

332102557
231142800: RNCC: 3 | RNVC: 2

9 Jul 2012

5340-33-126-3000
Acceso Tapa

5340-33-126-2999
Acceso Tapa

5340-33-207-0316
Angle Bracket

332070316
INS003024010020505: RNCC: 3 | RNVC: 2

16 Oct 2008

5340-33-207-2345
Catch Strike

332072345
235902: RNCC: 3 | RNVC: 2

26 Jan 2009

5340-33-001-0363
Handwheel

330010363
35-45001-0201: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-208-7195
Mounting Plate

332087195
J92563811-004: RNCC: 3 | RNVC: 2

12 Jan 2011

5340-33-207-7890
Rod End Clevis

332077890
5038600: RNCC: 3 | RNVC: 2
8.386.003: RNCC: 5 | RNVC: 2

16 Oct 2009

5340-33-208-5272
Buckle

332085272
XX-526103060100: RNCC: 3 | RNVC: 2
526103060100: RNCC: 5 | RNVC: 2
717331171201: RNCC: 6 | RNVC: 9

6 Sep 2010

5340-33-103-8416
Helical Compression Spring Retainer

331038416
X-38: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-207-7518
Mounting Plate

332077518
5047648: RNCC: 3 | RNVC: 2
1.150.11.012: RNCC: 5 | RNVC: 2

30 Sep 2009

5340-33-000-2034
Dust And Moisture Seal Protective Plug

330002034
100106: RNCC: 1 | RNVC: 2

11 Dec 1986

5340-33-207-4395
Double Angle Bracket

332074395
980686: RNCC: 3 | RNVC: 2

13 Apr 2009

5340-33-209-0753
Mounting Bracket

332090753
AGL095810A00: RNCC: 3 | RNVC: 2

31 May 2011

5340-33-004-5260
Pol Protector Tapon

5340-33-210-4509
Access Cover

332104509
INS030202027000000: RNCC: 3 | RNVC: 2

3 Oct 2012

5340-33-202-1365
Headless Straight Rod

332021365
5006981: RNCC: 3 | RNVC: 2

28 Jan 2003

5340-33-202-8747
Seal Retaining Plate

332028747
VR09270000: RNCC: 3 | RNVC: 2

17 Nov 2003

5340-33-155-9306
Dust And Moisture Seal Protective Plug

331559306
730677: RNCC: 3 | RNVC: 2
730677: RNCC: 5 | RNVC: 9

4 Jan 1991

5340-33-106-8184
Multiple Angle Bracket

331068184
318273: RNCC: 3 | RNVC: 2

29 Mar 1999

Load More Results