What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 27 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 27 of 39

5340-33-200-3630
Pipe Hanger

332003630
323681: RNCC: 3 | RNVC: 2

17 Jan 2002

5340-33-161-2156
Access Cover

331612156
1015-000514: RNCC: 3 | RNVC: 2

28 Jun 1993

5340-33-103-0786
Mounting Bracket

331030786
1005-001862: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-2555
Mounting Plate

331082555
9644.251.0162: RNCC: 3 | RNVC: 2
2510009651: RNCC: 5 | RNVC: 2
2510009651: RNCC: 5 | RNVC: 2

28 Feb 2001

5340-33-001-1936
Mounting Bracket

330011936
35-66112-0901: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-201-9844
Mounting Plate

332019844
223591322-01: RNCC: 3 | RNVC: 2

5 Dec 2002

5340-33-158-5711
Synchro Clamp

331585711
SS-06-0072G: RNCC: 3 | RNVC: 2

25 Jul 1995

5340-33-002-0005
Mounting Bracket

330020005
35-63635-0003: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-206-4062
Access Cover

332064062
0933321208000: RNCC: 3 | RNVC: 2

21 Dec 2007

5340-33-156-2202
Angle Bracket

331562202
-20710-07C00: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-210-9644
Exit Bolt

332109644
212-21180-1: RNCC: 3 | RNVC: 2

25 Apr 2013

5340-33-201-4061
Retaining Band

332014061
A2810562-001: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-106-9407
Mounting Plate

331069407
584733: RNCC: 3 | RNVC: 2

7 Apr 1999

5340-33-001-8500
Expansion Shield

330018500
20050-57BD: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-000-6949
Loop Clamp

330006949
562947: RNCC: 1 | RNVC: 2
562947: RNCC: 3 | RNVC: 2

8 Sep 1988

5340-33-002-8120
Door Handle

330028120
0004459892: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-154-5528
Retaining Strap

331545528
320868: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-116-5285
Compression Cup

331165285
4004622: RNCC: 3 | RNVC: 2

13 Sep 1995

5340-33-154-5522
Retaining Strap

331545522
319747: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-155-6932
Mending Plate

331556932
324183: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-205-1423
Rod End Clevis

332051423
BMY-19343: RNCC: 3 | RNVC: 2

12 May 2006

5340-33-107-1242
Mounting Bracket

331071242
610103703: RNCC: 3 | RNVC: 2
PCAMI/RP/0361010373: RNCC: 6 | RNVC: 9

29 Jun 1999

5340-33-161-7045
Padlock

331617045
730/93: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-200-3854
Access Cover

332003854
CF 122 269 AR: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-003-3928
Mounting Plate

330033928
11.14044-0190: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-202-5173
Access Cover

332025173
222422571-01: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-33-002-4614
Rod End Connector

330024614
CA250-05-1-51: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-204-4608
Loop Clamp

332044608
CBD58503P30: RNCC: 3 | RNVC: 2

16 Sep 2005

5340-33-116-7049
Angle Bracket

331167049
408.101: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-201-5817
Retaining Bail

332015817
I10019: RNCC: 3 | RNVC: 2

4 Sep 2002

5340-33-003-3557
Access Cover

330033557
11.12588-0045: RNCC: 3 | RNVC: 2

26 Jun 1997

5340-33-107-2486
Access Cover

331072486
20315993: RNCC: 3 | RNVC: 2

24 Sep 1999

5340-33-202-2066
Angle Bracket

332022066
NN60500P01: RNCC: 3 | RNVC: 2

25 Feb 2003

5340-33-005-4058
Rod End Connector

330054058
35-21365-2701: RNCC: 3 | RNVC: 2

18 Jul 2001

5340-33-108-5328
Mounting Bracket

331085328
9644.590.0050: RNCC: 3 | RNVC: 2
2510007396: RNCC: 5 | RNVC: 2
2510007396: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-161-7025
Padlock

331617025
300/60: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-158-2214
Retaining Clip

331582214
0216502-1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-8402
Mounting Bracket

331068402
W290675300600: RNCC: 3 | RNVC: 2

5 Apr 1999

5340-33-004-4549
Mounting Bracket

330044549
CLT0048-10: RNCC: 3 | RNVC: 2

17 May 1999

5340-33-161-5338
Retaining Band

331615338
315752: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-156-5026
Loop Clamp

331565026
-24210-03C02: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-2110
Rod End Clevis

332062110
35-42319-0009: RNCC: 3 | RNVC: 2

26 Sep 2007

5340-33-154-5547
Retaining Strap

331545547
737612: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-156-2330
Angle Bracket

331562330
-11233-Y9501: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-154-7489
Butt Hinge

331547489
571237.01: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-202-9854
Access Cover

332029854
723553713-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-201-9490
Mending Plate

332019490
A2812117-001: RNCC: 3 | RNVC: 2

20 Nov 2002

5340-33-211-1438
Access Cover

332111438
35-D4GC-MAM-01: RNCC: 3 | RNVC: 2

19 Jun 2013

5340-33-202-5702
Rigid Caster

332025702
403/80/32/NYL: RNCC: 3 | RNVC: 2

21 Aug 2003

5340-33-203-0353
Mounting Bracket

332030353
1025-900486: RNCC: 3 | RNVC: 2

19 Jan 2004

5340-33-107-6438
Mounting Plate

331076438
7356.252.4030: RNCC: 3 | RNVC: 2
2510700214: RNCC: 5 | RNVC: 2

17 Apr 2000

5340-33-105-2733
Loop Clamp

331052733
SS-06-0092P: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-154-6493
Loop Clamp

331546493
3090201911: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-204-6009
Mounting Plate

332046009
5012737: RNCC: 3 | RNVC: 2

27 Oct 2005

5340-33-106-4093
Mounting Bracket

331064093
8854 107-241: RNCC: 3 | RNVC: 2

12 Dec 1997

5340-33-108-4490
Mounting Bracket

331084490
9644.251.9990: RNCC: 3 | RNVC: 2
2540900500: RNCC: 5 | RNVC: 2
2540900500: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-203-6550
Loop Clamp

332036550
CBD50535G03: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-33-157-1964
Rod End Clevis

331571964
-16902042-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-0635
Bridge Clamp

331160635
BA-18138000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-145-5770
Mounting Plate

331455770
87-345: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-210-9619
Mounting Plate

332109619
BL 022: RNCC: 3 | RNVC: 2

22 Apr 2013

5340-33-205-3336
Angle Bracket

332053336
CHM0138: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-33-104-9004
Access Cover

331049004
193049: RNCC: 3 | RNVC: 2

12 Sep 1995

5340-33-000-6690
Retaining Strap

330006690
595368: RNCC: 1 | RNVC: 2

7 Sep 1988

5340-33-205-0071
Retaining Strap

332050071
58634-29F00: RNCC: 3 | RNVC: 2

30 Mar 2006

5340-33-105-9594
Access Cover

331059594
A52-47-01: RNCC: 3 | RNVC: 2

18 Sep 1996

5340-33-203-2763
Access Cover

332032763
9673.250.5340: RNCC: 3 | RNVC: 2
2510900559: RNCC: 5 | RNVC: 2
2510900559: RNCC: 5 | RNVC: 2

19 Feb 2004

5340-33-108-4367
Mounting Bracket

331084367
9644.591.5870: RNCC: 3 | RNVC: 2
2510900962: RNCC: 5 | RNVC: 2
2510900962: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-156-2164
Angle Bracket

331562164
-16814-G5500: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-107-0477
Snap Hook

331070477
14386: RNCC: 3 | RNVC: 2
PCAMI/RP/1700014386: RNCC: 6 | RNVC: 9

26 May 1999

5340-33-001-1395
Angle Bracket

330011395
35-54201-1501: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-160-3286
Turnbuckle

331603286
0-78-6-09: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-2851
Loop Clamp

330042851
NN60308G01: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-202-7039
Mounting Plate

332027039
9673.250.5226: RNCC: 3 | RNVC: 2
2540900695: RNCC: 5 | RNVC: 2
2540900695: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-106-8303
Mounting Bracket

331068303
W280675512002: RNCC: 3 | RNVC: 2

5 Apr 1999

5340-33-103-0161
Webbing Strap

331030161
880301331: RNCC: 3 | RNVC: 2

12 Sep 1995

5340-33-201-4808
Mounting Bracket

332014808
NN60617P05: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-103-4690
Mounting Plate

331034690
5111.065: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-5437
Retaining Strap

331575437
615443: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-6608
Access Cover

332026608
9673.250.0274: RNCC: 3 | RNVC: 2
2510900823: RNCC: 5 | RNVC: 2
2510900823: RNCC: 5 | RNVC: 2

23 Sep 2003

5340-33-116-8394
Retaining Clip

331168394
BY: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-4929
Mounting Bracket

331544929
191715: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-33-154-0670
Door Holder

331540670
201050: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-200-1847
Retaining Strap

332001847
J57461245-002: RNCC: 3 | RNVC: 2

29 Oct 2001

5340-33-004-1915
Access Cover

330041915
730092707: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-205-2957
Bridge Clamp

332052957
09404-06431: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-33-103-1571
Mounting Bracket

331031571
1005-004209: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-7193
Mounting Bracket

330027193
0013264: RNCC: 3 | RNVC: 2

26 Jul 1995

5340-33-205-6084
Loop Clamp

332056084
090-00187: RNCC: 3 | RNVC: 2

15 Jan 2007

5340-33-125-5012
Mounting Bracket

331255012
22-10107: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-000-1890
Loop Clamp

330001890
3040216749: RNCC: 1 | RNVC: 2

10 Dec 1986

5340-33-003-6723
Rod Retainer Clip

330036723
2510002953: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-157-8554
Mending Plate

331578554
785157: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-7601
Utility Resilient Mount

332067601
SCH65: RNCC: 3 | RNVC: 2

9 Jun 2008

5340-33-116-0653
Loop Clamp

331160653
BJ-17177080: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-4798
Mounting Bracket

331064798
3170010: RNCC: 3 | RNVC: 2
ALMCTI-1000003170010: RNCC: 5 | RNVC: 1

6 Mar 1998

5340-33-107-1761
Loop Clamp

331071761
5975000821: RNCC: 3 | RNVC: 2

1 Jul 1999

5340-33-114-5163
Detent Plunger

331145163
1TM 4-80: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-203-5491
Flush Catch Claw

332035491
80040006: RNCC: 3 | RNVC: 2

25 May 2004

5340-33-102-0824
Retaining Strap

331020824
E-0-34: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-107-1361
Doorknob

331071361
612301802: RNCC: 3 | RNVC: 2
PCAMI/RP/0361230182: RNCC: 6 | RNVC: 9

30 Jun 1999

5340-33-000-0796
Access Cover

330000796
107 014A: RNCC: 1 | RNVC: 2

10 Jul 1986

5340-33-000-0465
Loop Clamp

330000465
H350GS/D096: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-202-0258
Mending Plate

332020258
426205040400: RNCC: 3 | RNVC: 2

17 Dec 2002

5340-33-204-4293
Mounting Bracket

332044293
INS7030/001: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-005-3902
Lock-Release Lever

330053902
4PP4122-1170P001: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-33-003-3509
Loop Clamp

330033509
R508-E2X12: RNCC: 3 | RNVC: 2
R508-E2X12: RNCC: 5 | RNVC: 2

25 Jun 1997

5340-33-000-0658
Access Cover

330000658
6.302.0.787.029.4: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-160-7533
Plug Button

331607533
79.03.074.050: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-108-5292
Mounting Bracket

331085292
9644.100.0029: RNCC: 3 | RNVC: 2
1005005174: RNCC: 5 | RNVC: 2
1005005174: RNCC: 5 | RNVC: 2

27 Apr 2001

5340-33-001-4654
Access Cover

330014654
92026612: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-206-1973
Section Block Clamp

332061973
CBD58505P63: RNCC: 3 | RNVC: 2

24 Sep 2007

5340-33-108-4165
Mounting Plate

331084165
9644.810.0029: RNCC: 3 | RNVC: 2
1005005804: RNCC: 5 | RNVC: 2
1005005804: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-181-2865
Retaining Clip

331812865
-27156-G9700: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-4200
Angle Bracket

332014200
A2811761-003: RNCC: 3 | RNVC: 2

9 Jul 2002

5340-33-211-1857
Angle Bracket

332111857
10-67011-0601: RNCC: 3 | RNVC: 2

6 Jul 2013

5340-33-201-4066
Angle Bracket

332014066
A2810542-001: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-126-3325
Access Cover

331263325
9.303.1.753.001.5: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-4949
Utility Access Door

332044949
GE12010200: RNCC: 3 | RNVC: 2

27 Sep 2005

5340-33-001-3991
Retaining Strap

330013991
92021010: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-154-5689
Mending Plate

331545689
752730: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-107-8701
Case Leg

331078701
PCAMI/RP/37C0000103: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-33-001-1611
Mounting Bracket

330011611
35-61016-1401: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-0101
Mounting Bracket

330010101
35-34163-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-202-1645
Mounting Plate

332021645
223561323-01: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-33-202-3165
Angle Bracket

332023165
A2811747-002: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-33-114-4863
Access Cover

331144863
3.50 TTG-2: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-205-5700
Lever Bracket

332055700
CBD58504G08: RNCC: 3 | RNVC: 2

20 Dec 2006

5340-33-206-1306
Mounting Plate

332061306
PCMSABMR072: RNCC: 3 | RNVC: 2

30 Aug 2007

5340-33-161-4361
Mounting Bracket

331614361
607745: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-0558
Mounting Bracket

330010558
35-46224-0201: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-105-5740
Flush Bolt

331055740
-01601355-0: RNCC: 3 | RNVC: 2

9 May 1996

5340-33-005-3996
Sliding Block

330053996
SG-020-105: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-33-127-0256
Angle Bracket

331270256
I-9080-65: RNCC: 3 | RNVC: 2

9 Jan 1995

5340-33-106-1125
Loop Clamp

331061125
2957-19: RNCC: 1 | RNVC: 2

19 Mar 1997

5340-33-204-3497
Mechanical Stop

332043497
PS-810010: RNCC: 3 | RNVC: 2

19 Jul 2005

5340-33-102-0212
Rod End Connector

331020212
2510-000143: RNCC: 3 | RNVC: 2
2510000143: RNCC: 5 | RNVC: 2
411.090.0457: RNCC: 5 | RNVC: 2

6 Aug 1992

5340-33-108-6262
Mounting Plate

331086262
9644.250.5601: RNCC: 3 | RNVC: 2
2510007822: RNCC: 5 | RNVC: 2
2510007822: RNCC: 5 | RNVC: 2

30 Apr 2001

5340-33-108-5463
Mounting Bracket

331085463
0639.250.7842: RNCC: 3 | RNVC: 2
2540000727: RNCC: 5 | RNVC: 2
2540000727: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-107-6091
Self-Locking Insert

331076091
-86879-Y9500: RNCC: 3 | RNVC: 2

17 Mar 2000

5340-33-115-6106
Foot Bolt

331156106
92095902151: RNCC: 3 | RNVC: 2

27 Apr 1995

5340-33-154-0561
Mending Plate

331540561
801998: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-200-0773
Webbing Strap

332000773
7054.252.0436: RNCC: 3 | RNVC: 2
2540700119: RNCC: 5 | RNVC: 2

4 Oct 2001

5340-33-201-9841
Mounting Plate

332019841
223591320-01: RNCC: 3 | RNVC: 2

5 Dec 2002

5340-33-205-3768
Retaining Strap

332053768
NH1009244-10: RNCC: 3 | RNVC: 2

6 Sep 2006

5340-33-103-2411
Mounting Plate

331032411
1055-000323: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-9800
Mounting Bracket

330009800
35-21215-1202: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-9099
Access Cover

330019099
2.365.040.9: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-002-4816
Mounting Plate

330024816
212-62014-12-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-105-1117
Leather Strap

331051117
52620505060: RNCC: 3 | RNVC: 2
52620505060: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-203-5453
Mounting Bracket

332035453
INS0328/0001: RNCC: 3 | RNVC: 2

21 May 2004

5340-33-003-3506
Loop Clamp

330033506
R508-E5X12: RNCC: 3 | RNVC: 2

25 Jun 1997

5340-33-001-3910
Expansion Plug

330013910
92020318: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-104-6455
Loop Clamp

331046455
10.12.14.0788.0: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-33-107-6298
Mechanical Stop

331076298
055.526.301: RNCC: 3 | RNVC: 2

17 Mar 2000

5340-33-108-5336
Catch Strike

331085336
9644.810.0096: RNCC: 3 | RNVC: 2
2510007972: RNCC: 5 | RNVC: 2
2510007972: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-107-9982
Mounting Bracket

331079982
9644.811.0031: RNCC: 3 | RNVC: 2
1005900060: RNCC: 5 | RNVC: 2
1005900060: RNCC: 5 | RNVC: 2

23 Nov 2000

5340-33-202-7285
Mounting Bracket

332027285
45.21.940: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-33-106-8169
Angle Bracket

331068169
7356.252.0494: RNCC: 3 | RNVC: 2
2510009873: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-154-6517
Loop Clamp

331546517
314555: RNCC: 3 | RNVC: 2
314555: RNCC: 5 | RNVC: 9

1 Oct 1990

5340-33-206-2871
Mounting Bracket

332062871
200766608-00: RNCC: 3 | RNVC: 2

24 Oct 2007

5340-33-004-5891
Mounting Bracket

330045891
0212109: RNCC: 3 | RNVC: 2

2 Jul 1999

5340-33-003-4196
Mounting Bracket

330034196
11.28943-0515: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-103-2604
Access Cover

331032604
1055-000237: RNCC: 3 | RNVC: 2

1 Dec 1993

5340-33-106-6803
Door Handle

331066803
45 214 123 30/430: RNCC: 3 | RNVC: 2

28 Dec 1998

5340-33-166-0433
Access Cover

331660433
BW-614: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-181-6097
Mounting Bracket

331816097
-01500502-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-181-7700
Access Cover

331817700
-07201031-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-202-9932
Access Cover

332029932
723551392-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-201-3997
Angle Bracket

332013997
A2811311-401: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-202-9882
Mounting Bracket

332029882
723551814-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-201-9845
Access Cover

332019845
223591324-01: RNCC: 3 | RNVC: 2

5 Dec 2002

5340-33-000-7488
Angle Bracket

330007488
632036: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-201-9549
Access Cover

332019549
223591753-01: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-33-201-9541
Access Cover

332019541
223591707-01: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-33-202-9572
Mounting Plate

332029572
223552772-01: RNCC: 3 | RNVC: 2
223552772: RNCC: 5 | RNVC: 1

15 Dec 2003

5340-33-201-4224
Mounting Plate

332014224
A2810429-001: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-33-114-5000
Bumper

331145000
5TG 3-40: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-108-2546
Mounting Bracket

331082546
9644.251.0140: RNCC: 3 | RNVC: 2
2510009437: RNCC: 5 | RNVC: 2
2510009437: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-203-3458
Mounting Plate

332033458
CS-EF2-AG1040902: RNCC: 3 | RNVC: 2

3 Mar 2004

5340-33-200-8770
Butt Hinge

332008770
5340001707: RNCC: 3 | RNVC: 2
DIN 7956/40X0,8-30/ST/ZN: RNCC: 4 | RNVC: 1
9644.251.0214: RNCC: 5 | RNVC: 2

8 Apr 2002

5340-33-003-2593
Swivel Caster

330032593
2-1101: RNCC: 3 | RNVC: 2

7 Mar 1997

5340-33-205-9128
Lock Bar

332059128
2.159.002-A: RNCC: 3 | RNVC: 2
5032016: RNCC: 5 | RNVC: 2
2.159.002-A: RNCC: 5 | RNVC: 2

11 May 2007

5340-33-102-1899
Eye Hook

331021899
MCL-5-15: RNCC: 3 | RNVC: 2
MCL-5-15: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-155-7757
Angle Bracket

331557757
146839: RNCC: 3 | RNVC: 2
146839: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-203-6515
Mounting Bracket

332036515
9356.252.7070: RNCC: 3 | RNVC: 2
2510-903918: RNCC: 5 | RNVC: 2

20 Jul 2004

5340-33-001-1546
Rod End Connector

330011546
35-56176-0303: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-4740
Access Cover

330014740
92026766: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-188-8570
Hinged Hasp

331888570
1080021: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-204-7963
Threaded Rod End

332047963
PS-910498: RNCC: 3 | RNVC: 2

25 Jan 2006

5340-33-211-1032
Padlock

332111032
550-30: RNCC: 3 | RNVC: 2

9 Jun 2013

5340-33-200-3894
Sliding Block

332003894
CF 461 848 AE: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-205-6119
Mounting Bracket

332056119
1025902032: RNCC: 3 | RNVC: 2
9743.100.9070: RNCC: 5 | RNVC: 2

16 Jan 2007

5340-33-002-1233
Mounting Plate

330021233
5975-000432: RNCC: 3 | RNVC: 2

8 Jun 1993

5340-33-204-8758
Mounting Bracket

332048758
CA82700-0201A01: RNCC: 3 | RNVC: 2

17 Feb 2006

5340-33-001-1032
Mounting Bracket

330011032
35-46719-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-206-0703
Mounting Bracket

332060703
59150 00H02: RNCC: 3 | RNVC: 2
59150-00H02: RNCC: 5 | RNVC: 2

23 Jul 2007

5340-33-003-0019
Loop Clamp

330030019
000050587000: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-154-0203
Bow Handle

331540203
820332: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-107-4204
Mounting Plate

331074204
7057.412.0050: RNCC: 3 | RNVC: 2
2510700156: RNCC: 5 | RNVC: 2

15 Oct 1999

5340-33-154-2239
Mending Plate

331542239
694604: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-114-4736
Loop Clamp

331144736
F-131 40: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-109-8003
Bumper

331098003
Q 5 2107 0001: RNCC: 3 | RNVC: 2

27 Oct 1998

5340-33-204-2532
Mounting Bracket

332042532
853967: RNCC: 3 | RNVC: 2
2010-33-M29-7694: RNCC: 6 | RNVC: 9

30 May 2005

5340-33-108-2231
Mending Plate

331082231
9644.101.0035: RNCC: 3 | RNVC: 2
1005006359: RNCC: 5 | RNVC: 2
1005006359: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-107-7397
Mounting Plate

331077397
W290683111800: RNCC: 3 | RNVC: 2

19 May 2000

5340-33-157-7364
Loop Clamp

331577364
506965: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-0135
Protection Bellows

332040135
107 101 648 001: RNCC: 3 | RNVC: 2
H 81152: RNCC: 5 | RNVC: 2

2 Feb 2005

5340-33-154-8320
Expansion Shield

331548320
749-88/1-86: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-103-1180
Mounting Bracket

331031180
1005-005273: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-8649
Mounting Plate

331068649
197019: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-205-8528
Mounting Bracket

332058528
2554-101: RNCC: 3 | RNVC: 2

20 Apr 2007

5340-33-001-8033
Access Cover

330018033
35-22841-0001-01: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-201-4073
Angle Bracket

332014073
A2810567-401: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-001-2785
Loop Clamp

330012785
CAN67311-6: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-108-5160
Clevis And U-Bolt

331085160
758962: RNCC: 3 | RNVC: 2

27 Apr 2001

5340-33-202-9153
Mounting Bracket

332029153
1025-901802: RNCC: 3 | RNVC: 2

28 Nov 2003

5340-33-003-4155
Mounting Plate

330034155
11.43286-0350: RNCC: 3 | RNVC: 2
11.43286-0350: RNCC: 5 | RNVC: 2

27 Aug 1997

5340-33-000-9997
Mounting Bracket

330009997
35-31270-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-106-5623
Bumper

331065623
02311008-0: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-33-200-5528
Catch Strike

332005528
730100105: RNCC: 3 | RNVC: 2

4 Feb 2002

5340-33-200-3253
Retaining Strap

332003253
316404: RNCC: 3 | RNVC: 2

17 Dec 2001

5340-33-211-4984
Mechanical Stop

332114984
J29169055-001: RNCC: 3 | RNVC: 2

22 Nov 2013

5340-33-201-3848
Access Cover

332013848
723581717-01: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-33-003-4409
Leather Strap

330034409
SP-00477: RNCC: 3 | RNVC: 2
SP00476: RNCC: 5 | RNVC: 1

5 Sep 1997

5340-33-200-3011
Pipe Hanger

332003011
35-46390-0006A02: RNCC: 3 | RNVC: 2

10 Dec 2001

5340-33-116-1361
Retaining Strap

331161361
BA-17159020: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-4829
Strap Hinge

330024829
212-21226-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-203-5281
Access Cover

332035281
241564004: RNCC: 3 | RNVC: 2
241564004: RNCC: 5 | RNVC: 2
5340-33-M32-7256: RNCC: 6 | RNVC: 9

8 May 2004

5340-33-116-1362
Retaining Strap

331161362
BD-17149000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-4065
Angle Bracket

332014065
A2810541-001: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-102-1372
Mounting Bracket

331021372
70B-6306107: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-115-9351
Mending Plate

331159351
6.305.0.650.008.4: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-7787
Rod End Clevis

330047787
-07905149-0: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-33-115-8785
Access Door Hinge

331158785
H8/225/PH/29/20: RNCC: 3 | RNVC: 2

3 Feb 1993

5340-33-189-2262
Mounting Bracket

331892262
01020071: RNCC: 3 | RNVC: 2
PCAMI/1000000120071: RNCC: 5 | RNVC: 2

20 Jul 1995

5340-33-001-6470
Block Clamp

330016470
35-43339-0001-00: RNCC: 3 | RNVC: 2
35-43339-0001: RNCC: 5 | RNVC: 2

24 Apr 1990

5340-33-211-3325
Butt Hinge

332113325
Q78200000300000-0840: RNCC: 3 | RNVC: 2

23 Sep 2013

5340-33-115-6076
Plain Solid Disk

331156076
92290120014: RNCC: 3 | RNVC: 2

27 Apr 1995

5340-33-000-6721
Retaining Strap

330006721
813704: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-001-1807
Mounting Bracket

330011807
35-63071-0203: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-201-4099
Angle Bracket

332014099
A2811650-001: RNCC: 3 | RNVC: 2

9 Jul 2002

5340-33-102-1394
Access Hole Frame

331021394
70B-0400: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-103-2352
Mounting Bracket

331032352
1055-000564: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-0001
Angle Bracket

330010001
35-31278-0102: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-126-4343
Mounting Bracket

331264343
C22136-N1000-C20: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-0832
Mounting Bracket

330010832
35-46445-0201: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-202-4058
Angle Bracket

332024058
J92563185-001: RNCC: 3 | RNVC: 2

12 May 2003

5340-33-180-8626
Access Cover

331808626
712461: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-115-9276
Mounting Plate

331159276
DSH-145: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-0773
Rim Lock

332050773
51900-30901: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-33-001-0531
Mounting Bracket

330010531
35-46208-0005: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-189-1858
Mounting Bracket

331891858
02170020: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-000-6976
Loop Clamp

330006976
733698: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-203-0315
Mounting Bracket

332030315
999091820: RNCC: 3 | RNVC: 2
999091820: RNCC: 5 | RNVC: 2

19 Jan 2004

5340-33-108-0683
Bow Handle

331080683
7053.252.0700: RNCC: 3 | RNVC: 2
2510700058: RNCC: 5 | RNVC: 2

5 Dec 2000

5340-33-001-6623
Access Cover

330016623
35-11468-0002: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-205-2960
Loop Clamp

332052960
51453-29F20: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-33-001-8881
Expansion Shield

330018881
C-20050-12-1-I-01-15: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-001-9907
Mounting Bracket

330019907
35-11000-0402A02: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-33-108-4444
Webbing Strap

331084444
9644.250.6298: RNCC: 3 | RNVC: 2
2540001204: RNCC: 5 | RNVC: 2
2540001204: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-126-0616
Angle Bracket

331260616
6427-35: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-33-103-2429
Mounting Bracket

331032429
1055-000343: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-0565
Mounting Plate

332110565
10-11110-0601: RNCC: 3 | RNVC: 2

5 Jun 2013

5340-33-001-2058
Mounting Bracket

330012058
35-71101-0402: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-116-8287
Access Cover

331168287
BFM: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-4848
Catch Strike

330044848
201941: RNCC: 3 | RNVC: 2

2 Jun 1999

5340-33-002-0894
Webbing Strap

330020894
2510005673: RNCC: 3 | RNVC: 2
322504: RNCC: 3 | RNVC: 2

30 Oct 1992

5340-33-107-0665
Mounting Bracket

331070665
T501100300: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-33-103-2070
Vent Plug

331032070
9083.15.01.0602: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-6495
Access Cover

332026495
722422593-01: RNCC: 3 | RNVC: 2

22 Sep 2003

5340-33-003-0384
Retaining Clip

330030384
7700709315: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-001-3529
Access Cover

330013529
92016047: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-003-4406
Leather Strap

330034406
SP-00472: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-205-0778
Rim Lock Set

332050778
37000-29820: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-33-202-5588
Track Stop

332025588
35-25125-1201: RNCC: 3 | RNVC: 2

19 Aug 2003

5340-33-200-4394
Leather Strap

332004394
WQ 886 262 A: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-107-9031
Mounting Bracket

331079031
1-KPB-006000: RNCC: 3 | RNVC: 2

13 Sep 2000

5340-33-201-9840
Mounting Plate

332019840
223591315-01: RNCC: 3 | RNVC: 2

5 Dec 2002

5340-33-202-4948
Mounting Plate

332024948
722421752-01: RNCC: 3 | RNVC: 2

18 Jul 2003

5340-33-201-5537
Cushioning Pad

332015537
723561724-01: RNCC: 3 | RNVC: 2

2 Sep 2002

5340-33-102-0487
Loop Clamp

331020487
2510-000410: RNCC: 3 | RNVC: 2
411.090.0597: RNCC: 5 | RNVC: 2
2510000410: RNCC: 5 | RNVC: 2

2 Jan 1995

5340-33-200-1644
Mounting Plate

332001644
28110201: RNCC: 3 | RNVC: 2

26 Oct 2001

5340-33-202-9886
Mounting Plate

332029886
223551106-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-202-5176
Mounting Bracket

332025176
222422535-01: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-33-116-3994
Mounting Bracket

331163994
0-78-6-06: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-181-9175
Access Cover

331819175
-24880563: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-205-3032
Access Cover

332053032
69669-44E00: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-33-204-4077
Mounting Bracket

332044077
W290698407600: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-002-1542
Mounting Bracket

330021542
318020: RNCC: 3 | RNVC: 2

1 Jul 1993

5340-33-202-6684
Retaining Strap

332026684
9673.100.0057: RNCC: 3 | RNVC: 2
1005900401: RNCC: 5 | RNVC: 2
1005900401: RNCC: 5 | RNVC: 2

24 Sep 2003

5340-33-201-4363
Access Cover

332014363
223581212-01: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-33-205-3038
Access Cover

332053038
59669-03D00: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-33-155-7543
Mending Plate

331557543
593349: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-004-2576
Handwheel

330042576
A-1151B.13-12 ACE: RNCC: 3 | RNVC: 2

3 Nov 1998

5340-33-201-7084
Mounting Bracket

332017084
320599: RNCC: 3 | RNVC: 2

8 Oct 2002

5340-33-201-5861
Access Cover

332015861
171125: RNCC: 3 | RNVC: 2

5 Sep 2002

5340-33-004-7116
Loop Clamp

330047116
NRN50052G09: RNCC: 3 | RNVC: 2

10 Sep 1999

5340-33-108-5178
Retaining Band

331085178
794200: RNCC: 3 | RNVC: 2

26 Mar 2001

5340-33-114-4788
Mounting Bracket

331144788
10ILA 10-19: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-001-5637
Detent Plunger

330015637
92041366: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-161-2153
Mounting Plate

331612153
1015-000511: RNCC: 3 | RNVC: 2
41300024004: RNCC: 3 | RNVC: 2

28 Jun 1993

5340-33-204-8375
Butt Hinge

332048375
M502349700000: RNCC: 3 | RNVC: 2

13 Feb 2006

5340-33-001-1067
Lock-Release Lever

330011067
35-46747-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-116-8596
Mounting Bracket

331168596
598/51-3: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-105-1066
Bridge Clamp

331051066
42320010060: RNCC: 3 | RNVC: 2
42320010060: RNCC: 3 | RNVC: 2
VB-100-C-0200: RNCC: 5 | RNVC: 2

19 Nov 1997

5340-33-107-4061
Retaining Strap

331074061
W290683128100: RNCC: 3 | RNVC: 2

15 Oct 1999

5340-33-107-7896
Loop Clamp

331077896
4730000508: RNCC: 3 | RNVC: 2

3 Aug 2000

5340-33-206-9398
Bumper

332069398
152006: RNCC: 3 | RNVC: 2
G-070: RNCC: 5 | RNVC: 2

23 Sep 2008

5340-33-116-0906
Mounting Bracket

331160906
OS-18134010: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-115-8521
Access Cover

331158521
H8/225/PH/7/2: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-33-145-5669
Mounting Bracket

331455669
85-237: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-161-3331
Angle Bracket

331613331
532604: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-204-8939
Mounting Bracket

332048939
43650-29F10: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-002-8890
Retaining Clip

330028890
0008310783: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-001-6455
Rod End Clevis

330016455
GA61972-00: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-001-1026
Mounting Bracket

330011026
35-46712-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-0705
Mounting Bracket

330010705
35-46350-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-202-9051
Mounting Plate

332029051
223551750-01: RNCC: 3 | RNVC: 2
223551750: RNCC: 5 | RNVC: 1

27 Nov 2003

5340-33-202-9827
Mounting Plate

332029827
723552725-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-201-4359
Access Cover

332014359
723581420-02: RNCC: 3 | RNVC: 2
723581420-02: RNCC: 5 | RNVC: 2

17 Jul 2002

5340-33-201-9546
Mounting Plate

332019546
223591739-01: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-33-201-9852
Access Cover

332019852
223591748-01: RNCC: 3 | RNVC: 2

5 Dec 2002

5340-33-201-4068
Angle Bracket

332014068
A2810560-001: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-126-4345
Mounting Bracket

331264345
C22156-N1000-A1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-7968
Rod End Clevis

331067968
RE-25-2-2-21: RNCC: 3 | RNVC: 2

31 Mar 1999

5340-33-001-3828
Compression Cup

330013828
92020202: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-102-1872
Hasp Staple

331021872
42330000770: RNCC: 3 | RNVC: 2
MCL-3-73: RNCC: 3 | RNVC: 2
42330000770: RNCC: 3 | RNVC: 2
MCL-3-73: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-145-5900
Loop Clamp

331455900
TAB. C6-8: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-9727
Mounting Plate

332019727
5430010874: RNCC: 3 | RNVC: 2
5430010874: RNCC: 5 | RNVC: 2

29 Nov 2002

5340-33-108-2102
Mounting Bracket

331082102
0640.250.0020: RNCC: 3 | RNVC: 2
1005004127: RNCC: 5 | RNVC: 2
1005004127: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-166-0427
Access Cover

331660427
BW-62: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-202-6542
Access Cover

332026542
723551399-01: RNCC: 3 | RNVC: 2

22 Sep 2003

5340-33-001-1518
Mounting Bracket

330011518
35-56159-0105: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-210-8289
Mounting Bracket

332108289
S258A4012135: RNCC: 3 | RNVC: 2

26 Feb 2013

5340-33-188-8739
Shimmy Damper

331888739
6.0650.01.0.0006: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-9854
Access Cover

332019854
723591316-01: RNCC: 3 | RNVC: 2

5 Dec 2002

5340-33-106-1477
Mending Plate

331061477
6.437.336.0 - MEISA: RNCC: 3 | RNVC: 2

14 May 1997

5340-33-201-3128
Access Cover

332013128
113-54-25140: RNCC: 3 | RNVC: 2

21 Jun 2002

5340-33-205-5523
Angle Bracket

332055523
95-25946-0402: RNCC: 3 | RNVC: 2

15 Dec 2006

5340-33-201-4208
Angle Bracket

332014208
A2811762-003: RNCC: 3 | RNVC: 2

10 Jul 2002

5340-33-160-7729
Hinge Torsion Bar

331607729
5131.26: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-8857
Mounting Bracket

332018857
4617/39A: RNCC: 3 | RNVC: 2
2510701465: RNCC: 5 | RNVC: 2

11 Nov 2002

5340-33-105-7597
Rod End Clevis

331057597
150015: RNCC: 3 | RNVC: 2

4 Sep 1997

5340-33-157-8107
Access Cover

331578107
731606: RNCC: 3 | RNVC: 2

31 Oct 1996

5340-33-181-2071
Access Cover

331812071
-01201943-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-000-7038
Loop Clamp

330007038
3090215849: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-107-8590
Angle Bracket

331078590
125032: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-33-201-4089
Dust And Moisture Seal Protective Cover

332014089
723581882-01: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-202-4856
Eje De Arrastre L/D

332024856
2.135.031: RNCC: 3 | RNVC: 2
5028711: RNCC: 5 | RNVC: 2

10 Jul 2003

5340-33-202-4865
Eje De Arrastre L/D

332024865
2.135.032: RNCC: 3 | RNVC: 2
5028712: RNCC: 5 | RNVC: 2

10 Jul 2003

5340-33-202-4866
Eje De Arrastre L/I

332024866
2.135.033: RNCC: 3 | RNVC: 2
5028713: RNCC: 5 | RNVC: 2

10 Jul 2003

5340-33-202-4875
Eje De Arrastre L/I

332024875
2.135.034: RNCC: 3 | RNVC: 2
5028723: RNCC: 5 | RNVC: 2

11 Jul 2003

5340-33-206-1648
Utility Resilient Mount

332061648
136021: RNCC: 3 | RNVC: 2

12 Sep 2007

5340-33-187-2698
Nonmetallic Solid Wheel

331872698
25,14.06: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-209-6738
Rod End Clevis

332096738
0738020010: RNCC: 3 | RNVC: 2

30 Jan 2012

5340-33-108-5467
No Metalico Tope

331085467
0639.250.4766: RNCC: 3 | RNVC: 2
2540000739: RNCC: 5 | RNVC: 2
2540000739: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-209-1601
Butt Hinge Leaf

332091601
5340900143: RNCC: 3 | RNVC: 2
9743.100.0911: RNCC: 5 | RNVC: 2

6 Jul 2011

5340-33-208-4078
Compression Cup

332084078
50408: RNCC: 3 | RNVC: 2

19 May 2010

5340-33-208-0770
Dust And Moisture Seal Protective Cap-Plug

332080770
TAM9900237919001: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-33-210-5061
Access Cover

332105061
AU_515_P150: RNCC: 3 | RNVC: 2

19 Oct 2012

5340-33-209-5657
Mending Plate

332095657
2510900304: RNCC: 3 | RNVC: 2
9644.251.0628: RNCC: 5 | RNVC: 2

18 Jan 2012

5340-33-208-8758
Mounting Plate

332088758
INS003157990020000: RNCC: 3 | RNVC: 2

7 Apr 2011

5340-33-208-8771
Mending Plate

332088771
INS003134060040000: RNCC: 3 | RNVC: 2

11 Apr 2011

5340-33-000-6452
Helical Compression Spring Seat

330006452
180145 95: RNCC: 1 | RNVC: 2

15 Jun 1988

5340-33-205-0916
Hand Crank

332050916
0222430: RNCC: 3 | RNVC: 2

27 Apr 2006

5340-33-103-4644
Dust And Moisture Seal Protective Cap

331034644
2086.100: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-8690
Nut And Bolt Locking Plate

330048690
D0941411777: RNCC: 3 | RNVC: 2

13 Jan 2000

5340-33-206-1804
Dust And Moisture Seal Protective Cap

332061804
WW 101 220: RNCC: 3 | RNVC: 2

19 Sep 2007

5340-33-106-3269
Dust And Moisture Seal Protective Cap

331063269
631 267 09 96: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-206-8125
Snap Hook

332068125
IMCA100: RNCC: 3 | RNVC: 2
4030-33-P44-0431: RNCC: 6 | RNVC: 9

2 Jul 2008

5340-33-181-1113
Helical Compression Spring Retainer

331811113
-15302-76200: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-5982
Mechanic Equipment Hardware Kit

332005982
7562.252.1090: RNCC: 3 | RNVC: 2
2510700335: RNCC: 5 | RNVC: 2

6 Feb 2002

5340-33-004-1795
Manual Control Lever

330041795
4M5G00: RNCC: 3 | RNVC: 2

1 Sep 1998

5340-33-106-4556
Helical Compression Spring Seat

331064556
-44084-U9200: RNCC: 3 | RNVC: 2

9 Feb 1998

5340-33-004-6466
Dust And Moisture Seal Protective Cap

330046466
521313: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-005-3711
Utility Resilient Mount

330053711
206: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-33-116-3410
Helical Compression Spring Seat

331163410
6400.070: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-8042
Mechanic Equipment Hardware Kit

332018042
319879: RNCC: 3 | RNVC: 2

25 Oct 2002

5340-33-181-9161
Dust And Moisture Seal Protective Plug

331819161
-2485A059: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-202-7790
Dust And Moisture Seal Protective Cover

332027790
00020368: RNCC: 3 | RNVC: 2

28 Oct 2003

5340-33-190-2559
Spring Tension Clip

331902559
44317: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-207-7277
Swivel Caster

332077277
2-1233: RNCC: 3 | RNVC: 2
2-1233: RNCC: 5 | RNVC: 2

21 Sep 2009

5340-33-208-6371
Mounting Bracket

332086371
R0113376: RNCC: 3 | RNVC: 2

12 Nov 2010

5340-33-201-5846
Manual Control Handle

332015846
173713: RNCC: 3 | RNVC: 2

5 Sep 2002

5340-33-208-3604
Rod End Clevis

332083604
CF 205 774 - U: RNCC: 3 | RNVC: 2

23 Apr 2010

5340-33-105-2612
Helical Compression Spring Seat

331052612
556509: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-106-1806
Dust And Moisture Seal Boot

331061806
N1010102: RNCC: 3 | RNVC: 2

18 Jun 1997

5340-33-004-7018
Multiple Angle Bracket

330047018
NN60079P01: RNCC: 3 | RNVC: 2

3 Sep 1999

5340-33-114-4762
Helical Compression Spring Retainer

331144762
5 TG 4-95: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-108-2570
Mounting Actuator Plate

331082570
9644.251.0243: RNCC: 3 | RNVC: 2
2510009793: RNCC: 5 | RNVC: 2
2510009793: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-106-0560
Double Angle Bracket

331060560
147642: RNCC: 3 | RNVC: 2

14 Jan 1997

5340-33-180-7433
Double Angle Bracket

331807433
345192: RNCC: 3 | RNVC: 2

25 Jul 1995

5340-33-157-1871
Headless Grooved Rod

331571871
-239735-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-115-9570
Helical Compression Spring Seat

331159570
6.0690.77.5.2301: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-2860
Spring Tension Clip

332012860
D0951310907: RNCC: 3 | RNVC: 2

14 Jun 2002

5340-33-103-8382
Helical Compression Spring Retainer

331038382
X- 5: RNCC: 3 | RNVC: 2

25 Jul 1995

5340-33-003-1130
Manual Control Handle

330031130
R-2320-2: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-181-1894
Double Angle Bracket

331811894
-01601234-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-210-4319
Access Cover

332104319
AU_337: RNCC: 3 | RNVC: 2

2 Oct 2012

5340-33-160-2001
Acceso Tapa

5340-33-155-7874
Double Angle Bracket

331557874
576113: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-208-4442
Spacing Threaded Standoff

332084442
5051480: RNCC: 3 | RNVC: 2

25 Jun 2010

5340-33-205-3273
Utility Resilient Mount

332053273
145356: RNCC: 3 | RNVC: 2
0726957: RNCC: 5 | RNVC: 2

27 Jul 2006

5340-33-208-4452
Sliding Block

332084452
5052249: RNCC: 3 | RNVC: 2

25 Jun 2010

5340-33-208-4471
Mounting Bracket

332084471
B-V-H-09: RNCC: 3 | RNVC: 2
B-V-H-09: RNCC: 5 | RNVC: 2

29 Jun 2010

5340-33-204-9634
Bow Handle

332049634
0223401: RNCC: 3 | RNVC: 2

28 Feb 2006

5340-33-000-2859
Helical Compression Spring Seat

330002859
524700: RNCC: 1 | RNVC: 2

13 Mar 1997

5340-33-209-7334
Rod End Clevis

332097334
M721A1404000: RNCC: 3 | RNVC: 2

15 Feb 2012

5340-33-208-5210
Manual Control Lever

332085210
165043: RNCC: 3 | RNVC: 2

6 Aug 2010

5340-33-107-9549
Spring Holder

331079549
SP09012: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-33-209-7445
Access Cover

332097445
0853781200100: RNCC: 3 | RNVC: 2

17 Feb 2012

5340-33-004-6459
Dust And Moisture Seal Protective Cap

330046459
7956: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-209-1987
Mounting Bracket

332091987
0750029341: RNCC: 3 | RNVC: 2

18 Jul 2011

5340-33-108-0426
Spacing Threaded Standoff

331080426
W267010042502: RNCC: 3 | RNVC: 2

11 Dec 2000

5340-33-004-1929
Spacing Threaded Standoff

330041929
971000020: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-160-3909
No Metalico Tope

331603909
95.538.054: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-210-5021
Corrosion Preventive Anode

332105021
Z-2.696A: RNCC: 3 | RNVC: 2

18 Oct 2012

5340-33-200-4070
Manual Control Handle

332004070
N 3773 122 AR: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-157-7652
Double Angle Bracket

331577652
566607: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-5576
Dust And Moisture Seal Protective Cover

330045576
NN53375P01: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-33-114-5145
Luggage Handle

331145145
580.0115: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-209-5416
Angle Bracket

332095416
9743.100.0922: RNCC: 3 | RNVC: 2
5895900041: RNCC: 5 | RNVC: 2

17 Jan 2012

5340-33-209-6974
Mounting Bracket

332096974
PTYM15000A-CGCR: RNCC: 3 | RNVC: 2

8 Feb 2012

5340-33-005-0041
Dust And Moisture Seal Boot

330050041
0738413: RNCC: 3 | RNVC: 2

3 May 2000

5340-33-200-6024
Air Inlet-Outlet Frame

332006024
319348: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-116-8162
Dust And Moisture Seal Protective Cap-Plug

331168162
902.002.001: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-1084
Dust And Moisture Seal Protective Plug

332031084
2530-900056: RNCC: 3 | RNVC: 2

29 Jan 2004

5340-33-126-0102
Presilla Abrazadera

5340-33-126-0143
Union Placa

5340-33-207-5293
Dust And Moisture Seal Protective Plug

332075293
95-81824-0401: RNCC: 3 | RNVC: 2

2 Jun 2009

5340-33-154-8014

5340-33-116-2702
Acceso: Tapa

5340-33-004-5864
Window Regulator Handle

330045864
9848491: RNCC: 3 | RNVC: 2

2 Jul 1999

5340-33-116-3648
Dust And Moisture Seal Boot

331163648
2135.067: RNCC: 3 | RNVC: 2

3 Oct 1994

5340-33-107-8379
Spring Tension Clip

331078379
631 984 11 61: RNCC: 3 | RNVC: 2

26 Jun 2000

5340-33-107-6309
Grooved Clamp Coupling Ferrule

331076309
030.214.401: RNCC: 3 | RNVC: 2

17 Mar 2000

5340-33-209-6549
Angle Bracket

332096549
0738161870: RNCC: 3 | RNVC: 2

26 Jan 2012

5340-33-125-7483
Presilla Abrazadera

5340-33-156-3166
Flush Lock

331563166
-80500-G970X: RNCC: 3 | RNVC: 2
80500-G970X: RNCC: 6 | RNVC: 9

11 Jul 1995

5340-33-002-8470
Rodamiento Platillo

330028470
SE138140306A: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-003-1485
Mechanic Equipment Hardware Kit

330031485
325.0.900: RNCC: 3 | RNVC: 2

26 Feb 1996

5340-33-125-9279

5340-33-188-9848
Headless Straight Rod

331889848
3 170 216A: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-105-0635
Multiple Angle Bracket

331050635
PCT0041: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-161-3124
Double Angle Bracket

331613124
512168: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-206-9594
Friction Catch Stud

332069594
200342200: RNCC: 3 | RNVC: 2
201034220: RNCC: 5 | RNVC: 2

26 Sep 2008

5340-33-155-7875
Double Angle Bracket

331557875
321718: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-116-2697
Acceso: Tapa

5340-33-125-8632
Equipo Ele Conector

5340-33-114-5614

5340-33-125-7986
Union Placa

5340-33-125-7481
Presilla Abrazadera

5340-33-206-1573
Utility Resilient Mount

332061573
135332: RNCC: 3 | RNVC: 2
BRB110-50SH-M16: RNCC: 5 | RNVC: 2

7 Sep 2007

5340-33-207-1189
Mounting Plate

332071189
RR150 99012: RNCC: 3 | RNVC: 2
905902-12: RNCC: 5 | RNVC: 2

17 Nov 2008

5340-33-103-1744
Dust And Moisture Seal Protective Plug

331031744
5340-000803: RNCC: 3 | RNVC: 2
3319: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-158-7704
Presilla Abrazadera

5340-33-208-7113
Webbing Strap

332087113
235-WH3-50+2311VTR-50 1500/400: RNCC: 3 | RNVC: 2

10 Jan 2011

5340-33-203-9656
Spring Holder

332039656
WW 286 246-U: RNCC: 3 | RNVC: 2
590.14.07: RNCC: 5 | RNVC: 2

28 Jan 2005

5340-33-204-3759
Double Angle Bracket

332043759
NN60829P01: RNCC: 3 | RNVC: 2

18 Aug 2005

5340-33-200-1307
Double Angle Bracket

332001307
323667: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-154-3817
Nut And Bolt Locking Plate

331543817
5340001032: RNCC: 3 | RNVC: 2
314936: RNCC: 3 | RNVC: 2
314936: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-201-9489
Double Angle Bracket

332019489
A2811845-001: RNCC: 3 | RNVC: 2

20 Nov 2002

5340-33-210-6912
Mounting Bracket

332106912
PCMSABMR175: RNCC: 3 | RNVC: 2

28 Dec 2012

5340-33-208-6008
Mechanical Stop

332086008
R0110000: RNCC: 3 | RNVC: 2

20 Oct 2010

5340-33-208-1069
Mounting Plate

332081069
BBANA19: RNCC: 3 | RNVC: 2

23 Feb 2010

5340-33-200-1599
De Pres Abrazadera

5340-33-126-3425
Helical Compression Spring Seat

331263425
6.0690.20.3.0153: RNCC: 3 | RNVC: 2

4 Nov 1992

5340-33-105-2179
Dust And Moisture Seal Boot

331052179
D-4666: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-104-7738
Helical Compression Spring Seat

331047738
9040-190: RNCC: 3 | RNVC: 2
6.0690.20.3.0145: RNCC: 5 | RNVC: 2

21 Aug 1995

5340-33-105-7552
Manual Control Handle

331057552
CMH95200-3/8-35: RNCC: 3 | RNVC: 2

1 Jun 1996

5340-33-004-3255
Mecan Reten Rigido

5340-33-210-5060
Access Cover

332105060
AU_515_P100: RNCC: 3 | RNVC: 2

19 Oct 2012

5340-33-125-7988
Union Placa

5340-33-125-8636
Equipo Ele Conector

5340-33-125-9229
Pol Protectora Tapa

5340-33-156-0359

5340-33-156-0325

5340-33-156-0316

5340-33-160-2802
Muelle Helico Reten

5340-33-207-4278
Caster Wheel

332074278
2625112: RNCC: 3 | RNVC: 2
202198: RNCC: 5 | RNVC: 2

3 Apr 2009

5340-33-208-5444
Access Cover

332085444
RM-30030: RNCC: 3 | RNVC: 2

17 Sep 2010

5340-33-107-0382
Dust And Moisture Seal Protective Plug

331070382
933078: RNCC: 3 | RNVC: 2
PCAMI/RP/1400933078: RNCC: 6 | RNVC: 9

26 May 1999

5340-33-200-3414
Utility Resilient Mount

332003414
31872-X: RNCC: 3 | RNVC: 2
92990857214: RNCC: 5 | RNVC: 2

11 Jan 2002

5340-33-209-6238
Mounting Plate

332096238
0750031961: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-33-125-7433
Acceso Tapa

5340-33-108-2932
Montajes Soporte

5340-33-114-4964

5340-33-114-4932

5340-33-105-6786
Protection: Bellows

5340-33-103-1886
Manguito Union

331031886
2520-000103: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-2666
Manual Control Handle

331562666
-18415-G9600: RNCC: 3 | RNVC: 2
-18415-G9601: RNCC: 3 | RNVC: 2
-18415-G9625: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-209-8464
Snap Hook

332098464
192-140: RNCC: 3 | RNVC: 2

15 Mar 2012

5340-33-210-2559
Vent Plug

332102559
161125100: RNCC: 3 | RNVC: 2

9 Jul 2012

5340-33-210-4191
Bumper

332104191
68000049: RNCC: 3 | RNVC: 2
8431927009647: RNCC: 5 | RNVC: 2

1 Oct 2012

Load More Results