What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 26 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 26 of 39

5340-33-107-6472
Webbing Strap

331076472
324068: RNCC: 3 | RNVC: 2
324068: RNCC: 5 | RNVC: 2

17 Apr 2000

5340-33-161-4595
Mechanical Stop

331614595
463023: RNCC: 3 | RNVC: 2
463.023: RNCC: 5 | RNVC: 2

21 Aug 1995

5340-33-205-6716
Mounting Plate

332056716
5029739: RNCC: 3 | RNVC: 2
1.108.92.027-A: RNCC: 5 | RNVC: 2

16 Feb 2007

5340-33-001-1648
Mounting Bracket

330011648
35-61152-0201: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-205-4091
Utility Access Door

332054091
W290620308300: RNCC: 3 | RNVC: 2

15 Sep 2006

5340-33-155-0648
Access Cover

331550648
749/83/1/26: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-000-6987
Loop Clamp

330006987
780749: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-203-9993
Loop Clamp

332039993
191152230: RNCC: 3 | RNVC: 2
191152230: RNCC: 5 | RNVC: 2

31 Jan 2005

5340-33-108-6996
Mounting Bracket

331086996
32320010160: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-33-108-4521
Webbing Strap

331084521
9644.251.6529: RNCC: 3 | RNVC: 2
2590900124: RNCC: 5 | RNVC: 2
2590900124: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-161-1344
Webbing Strap

331611344
00.177.844.07: RNCC: 3 | RNVC: 2

21 Sep 1995

5340-33-001-3547
Bumper

330013547
92016071: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-001-4646
Access Cover

330014646
92026604: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-192-3769
Retaining Strap

331923769
140.83: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-001-0756
Mounting Bracket

330010756
35-46372-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-203-4817
Door Handle

332034817
SERIE EUROPEA CL: RNCC: 3 | RNVC: 2

23 Apr 2004

5340-33-200-5045
Mounting Plate

332005045
19522201: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-204-4952
Mechanical Stop

332044952
CART010000: RNCC: 3 | RNVC: 2

27 Sep 2005

5340-33-205-7000
Access Cover

332057000
217ME760012: RNCC: 3 | RNVC: 2

26 Feb 2007

5340-33-156-5009
Loop Clamp

331565009
-17530-G2800: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-4639
Rod End Connector

331564639
-48612-C9500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-7095
Angle Bracket

330047095
NN60078P01: RNCC: 3 | RNVC: 2

10 Sep 1999

5340-33-004-5236
Access Cover

330045236
510729: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-000-6962
Loop Clamp

330006962
584009: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-005-1553
Threaded Rod End

330051553
201601202: RNCC: 3 | RNVC: 2

13 Nov 2000

5340-33-180-9119
Access Cover

331809119
348869K2: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-004-2837
Angle Bracket

330042837
NN60151P01: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-003-4252
Leather Strap

330034252
159-384: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-107-0657
Mounting Bracket

331070657
T501030100: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-33-204-0643
Webbing Strap

332040643
OEWL0GVEO010500: RNCC: 3 | RNVC: 2

3 Mar 2005

5340-33-181-1158
Retaining Band

331811158
-27093-G7001: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-155-9005
Access Cover

331559005
310208: RNCC: 3 | RNVC: 2
310208: RNCC: 5 | RNVC: 9

4 Jan 1991

5340-33-103-7823
Access Cover

331037823
195037: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-33-106-7286
Lock-Release Lever

331067286
AM12010500: RNCC: 3 | RNVC: 2
AM81010700: RNCC: 5 | RNVC: 2

23 Mar 1999

5340-33-105-2597
Mounting Bracket

331052597
108.123A: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-103-0961
Mounting Bracket

331030961
411.090.0510: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3507
Bumper

330013507
92016025: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-002-2043
Door Hook

330022043
CA264: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-33-210-9977
Mounting Bracket

332109977
BL 1035SIM: RNCC: 3 | RNVC: 2

7 May 2013

5340-33-188-9829
Rod End Clevis

331889829
3 170 376 B: RNCC: 3 | RNVC: 2

25 Sep 1995

5340-33-190-3541
Mounting Bracket

331903541
1-500214: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-1184
Mounting Bracket

330011184
35-49126-0004: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-203-5609
Utility Access Door

332035609
80010100: RNCC: 3 | RNVC: 2

25 May 2004

5340-33-201-7301
Loop Clamp

332017301
EN4114F14NH1: RNCC: 2 | RNVC: 2

15 Oct 2002

5340-33-206-1229
Retaining Clip

332061229
23912-84CB0: RNCC: 3 | RNVC: 2

27 Aug 2007

5340-33-107-9759
Mounting Plate

331079759
9644.250.6003: RNCC: 3 | RNVC: 2
2540001184: RNCC: 5 | RNVC: 2
2540001184: RNCC: 5 | RNVC: 2

2 Nov 2000

5340-33-202-4550
Rod End Clevis

332024550
02244705: RNCC: 3 | RNVC: 2

13 Jun 2003

5340-33-157-8163
Access Cover

331578163
736392: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-7572
Access Cover

331167572
648967: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-1347
Mounting Plate

331611347
1880.27: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-154-7476
Bow Handle

331547476
312530: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-004-2860
Angle Bracket

330042860
NN60169P01: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-106-7573
Angle Bracket

331067573
7700760877: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-001-4462
Bumper

330014462
92026348: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-204-1845
Mounting Plate

332041845
2540901575: RNCC: 3 | RNVC: 2
2540901575: RNCC: 5 | RNVC: 2

27 Apr 2005

5340-33-202-1654
Mounting Plate

332021654
223561702-01: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-33-200-3057
Mounting Plate

332003057
723571425-01: RNCC: 3 | RNVC: 2

12 Dec 2001

5340-33-202-9016
Ball Socket Seat

332029016
723551352-01: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-211-6326
Loop Clamp

332116326
21113: RNCC: 3 | RNVC: 2

13 Dec 2013

5340-33-211-6368
Mounting Plate

332116368
53204-94117000: RNCC: 3 | RNVC: 2

18 Dec 2013

5340-33-106-7319
Access Cover

331067319
AM12020400: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-157-8125
Angle Bracket

331578125
733971: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-1567
Loop Clamp

331061567
-62318-G9600: RNCC: 3 | RNVC: 2

20 May 1997

5340-33-161-6173
Rod End Connector

331616173
40050: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-190-3509
Access Cover

331903509
3-88510: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-116-3163
Access Cover

331163163
2690.076: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-6947
Loop Clamp

330006947
562257: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-203-8017
Access Cover

332038017
9057.252.5030: RNCC: 3 | RNVC: 2
2510-904039: RNCC: 5 | RNVC: 2

27 Oct 2004

5340-33-116-0657
Loop Clamp

331160657
OB-15163030: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-181-7193
Mechanical Stop

331817193
-06400426-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-103-1056
Friction Catch Stud

331031056
411.091.1312: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-9882
Mounting Bracket

332009882
2510900334: RNCC: 3 | RNVC: 2
2510900334: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-161-4600
Leather Strap

331614600
737472: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-0757
Mounting Plate

332000757
7054.252.0115: RNCC: 3 | RNVC: 2
2510700889: RNCC: 5 | RNVC: 2

4 Oct 2001

5340-33-103-1624
Rod End Connector

331031624
1005-004387: RNCC: 3 | RNVC: 2
2529: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-154-0455
Expansion Plug

331540455
807902: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-107-1950
Hinged Hasp

331071950
443857113A: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-105-7292
Flush Bolt

331057292
-80500-01C00: RNCC: 3 | RNVC: 2

9 May 1996

5340-33-203-4999
Angle Bracket

332034999
NN60694P01: RNCC: 3 | RNVC: 2

1 May 2004

5340-33-002-0882
Mounting Bracket

330020882
320304: RNCC: 3 | RNVC: 2

30 Oct 1992

5340-33-181-0176
Angle Bracket

331810176
-76719-G970X: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-108-0493
Mounting Plate

331080493
9644.280.5074: RNCC: 3 | RNVC: 2
2930000471: RNCC: 5 | RNVC: 2
2930000471: RNCC: 5 | RNVC: 2

11 Dec 2000

5340-33-107-3729
Bumper

331073729
RAL-200-2-7-10: RNCC: 3 | RNVC: 2

4 Oct 1999

5340-33-202-0208
Access Cover

332020208
2510003464: RNCC: 3 | RNVC: 2

16 Dec 2002

5340-33-103-0873
Angle Bracket

331030873
411.091.0708: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-5706
Expansion Plug

331065706
1345682: RNCC: 3 | RNVC: 2
1345682: RNCC: 5 | RNVC: 2

9 Jul 1998

5340-33-103-5291
Ball Socket Seat

331035291
9505-1-2-13: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-202-2801
Angle Bracket

332022801
876286: RNCC: 3 | RNVC: 2

20 Mar 2003

5340-33-154-6669
Access Cover

331546669
770862: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-001-3235
Compression Cup

330013235
92011031: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-004-9286
Bumper

330049286
11.43385-0096: RNCC: 3 | RNVC: 2
11.43385-0096: RNCC: 5 | RNVC: 2

29 Feb 2000

5340-33-003-6730
Mounting Plate

330036730
2510003176: RNCC: 3 | RNVC: 2
COH-04515: RNCC: 5 | RNVC: 2

27 May 1998

5340-33-108-1417
Access Cover

331081417
2 0045-210: RNCC: 3 | RNVC: 2

16 Jan 2001

5340-33-211-4985
Mechanical Stop

332114985
J29169055-002: RNCC: 3 | RNVC: 2

22 Nov 2013

5340-33-205-2693
Stand Base

332052693
CBD50509P03: RNCC: 3 | RNVC: 2

12 Jul 2006

5340-33-108-4508
Mounting Bracket

331084508
9644.251.9710: RNCC: 3 | RNVC: 2
2590900094: RNCC: 5 | RNVC: 2
2590900094: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-201-9491
Mounting Bracket

332019491
J92561390-401: RNCC: 3 | RNVC: 2

20 Nov 2002

5340-33-000-6973
Loop Clamp

330006973
644551: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-205-7258
Mounting Plate

332057258
5024562: RNCC: 3 | RNVC: 2
1.108.72.008: RNCC: 5 | RNVC: 2

2 Mar 2007

5340-33-102-1862
Mounting Bracket

331021862
42230000081: RNCC: 3 | RNVC: 2
MCL-2-8: RNCC: 3 | RNVC: 2
42230000081: RNCC: 3 | RNVC: 2
MCL-2-8: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-114-4812
Handle Grip

331144812
10 ILA 6-45: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-157-9466
Mending Plate

331579466
752927: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-2999
Mounting Plate

332112999
5061548: RNCC: 3 | RNVC: 2
1.164.91.010: RNCC: 5 | RNVC: 2

13 Aug 2013

5340-33-001-4184
Detent Plunger

330014184
92023136: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-004-2964
Angle Bracket

330042964
754718: RNCC: 3 | RNVC: 2

23 Dec 1998

5340-33-202-6777
Mounting Bracket

332026777
9673.590.0360: RNCC: 3 | RNVC: 2
2510902587: RNCC: 5 | RNVC: 2
2510902587: RNCC: 5 | RNVC: 2

25 Sep 2003

5340-33-002-9746
Retaining Clip

330029746
6319842061: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-126-9309
Retaining Strap

331269309
8546.028: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-8669
Angle Bracket

331578669
812548: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-0677
Door Holder

331540677
750994: RNCC: 3 | RNVC: 2
750995: RNCC: 3 | RNVC: 2
15100095: RNCC: 5 | RNVC: 9

18 Jan 1991

5340-33-157-7260
Access Cover

331577260
318622: RNCC: 3 | RNVC: 2
318622: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-160-3837
Mounting Plate

331603837
5.420.320: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-4769
Mounting Bracket

332064769
1807170000: RNCC: 3 | RNVC: 2

29 Jan 2008

5340-33-116-6272
Access Cover

331166272
M-113-9: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-1783
Mortise Latch

332021783
35-25129-0503: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-33-001-3870
Retaining Strap

330013870
92020247: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-107-4948
Mounting Bracket

331074948
W290684704200: RNCC: 3 | RNVC: 2

1 Dec 1999

5340-33-202-6640
Access Cover

332026640
9673.590.5620: RNCC: 3 | RNVC: 2
2510901554: RNCC: 5 | RNVC: 2
2510901554: RNCC: 5 | RNVC: 2

24 Sep 2003

5340-33-158-4323
Access Cover

331584323
583368: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-9522
Loop Clamp

331069522
CINCHO CHO-8-15: RNCC: 3 | RNVC: 2
PCAMI/RP/0700000505/N: RNCC: 5 | RNVC: 2
PCAMI/RP/0700000505: RNCC: 6 | RNVC: 9

18 May 1999

5340-33-158-8956
Loop Clamp

331588956
-018069: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-3114
Loop Clamp

332043114
706200016: RNCC: 3 | RNVC: 2

30 Jun 2005

5340-33-204-6097
Bumper

332046097
71521-56B00: RNCC: 3 | RNVC: 2
71521-56B00: RNCC: 5 | RNVC: 2

3 Nov 2005

5340-33-201-4767
Access Cover

332014767
J52464011-003: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-001-1044
Mounting Bracket

330011044
35-46726-0401: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-103-1589
Mounting Bracket

331031589
471-091-0100: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-0377
Runner

331030377
A-1-12: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-1854
Mounting Bracket

331061854
1777B4146/3.3.06: RNCC: 3 | RNVC: 2

18 Jun 1997

5340-33-205-4926
Stand Base

332054926
WW MDB 025 A: RNCC: 3 | RNVC: 2

20 Nov 2006

5340-33-157-7487
Access Cover

331577487
536703: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-190-5286
Access Cover

331905286
JC10: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-157-7579
Access Cover

331577579
551796: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-116-4427
Loop Clamp

331164427
5106: RNCC: 3 | RNVC: 2

26 Apr 1993

5340-33-205-4136
Angle Bracket

332054136
5040317: RNCC: 3 | RNVC: 2
1.143.92.017: RNCC: 5 | RNVC: 2

15 Sep 2006

5340-33-116-2706
Access Cover

331162706
10.7123021: RNCC: 3 | RNVC: 9

13 Sep 1995

5340-33-103-9896
Loop Clamp

331039896
956004108: RNCC: 3 | RNVC: 2

3 Jan 1995

5340-33-205-0211
Mounting Plate

332050211
0600589: RNCC: 3 | RNVC: 2

5 Apr 2006

5340-33-108-0543
Loop Clamp

331080543
0639.280.1022: RNCC: 3 | RNVC: 2
4730001879: RNCC: 5 | RNVC: 2
4730001879: RNCC: 5 | RNVC: 2

11 Dec 2000

5340-33-107-0086
Mounting Bracket

331070086
7-201: RNCC: 3 | RNVC: 2
PCAMI/RP/0700000559: RNCC: 6 | RNVC: 9

25 May 1999

5340-33-200-9042
Mending Plate

332009042
3465700089: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-33-000-2706
Angle Bracket

330002706
311171: RNCC: 1 | RNVC: 2
311171: RNCC: 3 | RNVC: 2

22 May 1987

5340-33-204-0191
Mounting Bracket

332040191
160710-78710: RNCC: 3 | RNVC: 2

3 Feb 2005

5340-33-000-6933
Loop Clamp

330006933
523602: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-161-4223
Support Hook

331614223
154205: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-202-6706
Access Cover

332026706
5034122: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-33-003-4106
Retaining Strap

330034106
11.40886-0018: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-103-1574
Mounting Bracket

331031574
1005-004278: RNCC: 3 | RNVC: 2
1519: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-211-2962
Mounting Bracket

332112962
SP08669: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-33-107-9749
Angle Bracket

331079749
9644.251.6255: RNCC: 3 | RNVC: 2
2510900758: RNCC: 5 | RNVC: 2
2510900758: RNCC: 5 | RNVC: 2

2 Nov 2000

5340-33-157-9017
Mending Plate

331579017
319033: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-211-1842
Mounting Bracket

332111842
VR08010100: RNCC: 3 | RNVC: 2
VR08010100: RNCC: 3 | RNVC: 2

6 Jul 2013

5340-33-157-8100
Access Cover

331578100
731485: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-102-1901
Loop Clamp

331021901
MCL-5-35: RNCC: 3 | RNVC: 2
MCL-5-35: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-202-0746
Strap Hinge

332020746
L3138.10.08: RNCC: 3 | RNVC: 2

3 Jan 2003

5340-33-104-8076
Angle Bracket

331048076
682773: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-4627
Butt Hinge

331564627
-80421-G9602: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-1075
Mounting Bracket

332001075
7063.252.0480: RNCC: 3 | RNVC: 2
1240700008: RNCC: 5 | RNVC: 2

8 Oct 2001

5340-33-107-9986
Mounting Bracket

331079986
9644.250.2290: RNCC: 3 | RNVC: 2
2510008535: RNCC: 5 | RNVC: 2
2510008535: RNCC: 5 | RNVC: 2

23 Nov 2000

5340-33-108-4507
Bow Handle

331084507
9644.251.6434: RNCC: 3 | RNVC: 2
2590900080: RNCC: 5 | RNVC: 2
2590900080: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-202-3546
Shimmy Damper

332023546
GR3D010611: RNCC: 3 | RNVC: 2

21 Apr 2003

5340-33-206-2184
Retaining Strap

332062184
980627: RNCC: 3 | RNVC: 2

1 Oct 2007

5340-33-190-3877
Loop Clamp

331903877
2510000044: RNCC: 3 | RNVC: 2
2244-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-003-2836
Retaining Strap

330032836
721023202: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-202-0246
Mending Plate

332020246
000019001100: RNCC: 3 | RNVC: 2

17 Dec 2002

5340-33-161-5036
Mending Plate

331615036
733554: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-33-108-0544
Loop Clamp

331080544
0639.280.1019: RNCC: 3 | RNVC: 2
4730001880: RNCC: 5 | RNVC: 2
4730001880: RNCC: 5 | RNVC: 2

11 Dec 2000

5340-33-204-3077
Mounting Bracket

332043077
BMR99: RNCC: 3 | RNVC: 2

28 Jun 2005

5340-33-201-7509
Lock Key

332017509
93927413: RNCC: 3 | RNVC: 2

21 Oct 2002

5340-33-116-6268
Access Cover

331166268
606.007.007: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-158-4326
Access Cover

331584326
741513: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-6955
Loop Clamp

330006955
578369: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-204-3117
Loop Clamp

332043117
706200019: RNCC: 3 | RNVC: 2

30 Jun 2005

5340-33-000-7031
Loop Clamp

330007031
3090212611: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-201-4009
Angle Bracket

332014009
A2810483-002: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-190-5488
Access Cover

331905488
43176653-011: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-126-4208
Angle Bracket

331264208
C22156-N1000-B6: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-154-0274
Butt Hinge

331540274
816062: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-002-9588
Door Closer

330029588
6317400516: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-154-5541
Retaining Strap

331545541
630162: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-107-2620
Metal Grille

331072620
23184891000: RNCC: 3 | RNVC: 2

24 Sep 1999

5340-33-180-5480
Lever Bracket

331805480
120872: RNCC: 3 | RNVC: 2
120734: RNCC: 3 | RNVC: 2

7 Mar 1997

5340-33-108-4518
Cushioning Pad

331084518
9644.251.6541: RNCC: 3 | RNVC: 2
2590900115: RNCC: 5 | RNVC: 2
2590900115: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-000-1738
Leather Strap

330001738
1005001196: RNCC: 1 | RNVC: 2
1005-001196: RNCC: 3 | RNVC: 2

1 Dec 1986

5340-33-102-0440
Access Cover

331020440
2510-000099: RNCC: 3 | RNVC: 2
2510000099: RNCC: 5 | RNVC: 2
411.090.0438: RNCC: 5 | RNVC: 2

14 Oct 1992

5340-33-205-3463
Catch Strike

332053463
PS-911406: RNCC: 3 | RNVC: 2

21 Aug 2006

5340-33-211-2178
Angle Bracket

332112178
TP252337: RNCC: 3 | RNVC: 2

9 Jul 2013

5340-33-116-3113
Angle Bracket

331163113
8506.003: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-9298
Pipe Hanger

331559298
646695: RNCC: 3 | RNVC: 2
646695: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-157-7854
Access Cover

331577854
630971: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-203-9701
Access Cover

332039701
20880701: RNCC: 3 | RNVC: 2
33R288289: RNCC: 5 | RNVC: 1

28 Jan 2005

5340-33-001-6523
Mounting Bracket

330016523
35-53322-0801: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-205-4030
Mounting Plate

332054030
5040715: RNCC: 3 | RNVC: 2
1.143.91.002: RNCC: 5 | RNVC: 2

14 Sep 2006

5340-33-205-3618
Rod End Clevis

332053618
5032022: RNCC: 3 | RNVC: 2
1.128.71.008: RNCC: 5 | RNVC: 2

24 Aug 2006

5340-33-001-3912
Expansion Plug

330013912
92020320: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-001-3680
Compression Cup

330013680
92019216: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-189-2272
Mounting Bracket

331892272
01060130: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-116-5522
Access Cover

331165522
21610-822-611: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-1029
Strapping

330001029
H350GS/D125: RNCC: 1 | RNVC: 2

14 Jul 1986

5340-33-205-0193
Mounting Plate

332050193
0219740: RNCC: 3 | RNVC: 2

4 Apr 2006

5340-33-000-2707
Angle Bracket

330002707
311704: RNCC: 1 | RNVC: 2
5340001027: RNCC: 3 | RNVC: 2
311704: RNCC: 3 | RNVC: 2

22 May 1987

5340-33-211-1235
Crank Handle

332111235
VR01180300: RNCC: 3 | RNVC: 2
VR01180300: RNCC: 3 | RNVC: 2

16 Jun 2013

5340-33-108-0195
Angle Bracket

331080195
9644.251.5677: RNCC: 3 | RNVC: 2
2540900112: RNCC: 5 | RNVC: 2
2540900112: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-001-0946
Mounting Bracket

330010946
35-46644-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-155-6268
Access Cover

331556268
882277: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-115-8149
Access Cover

331158149
10204001030: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-200-9398
Access Cover

332009398
46 659 610: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-33-116-3262
Mounting Bracket

331163262
8902.094: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-1540
Turnbuckle

332051540
2.18.017.00: RNCC: 3 | RNVC: 2

18 May 2006

5340-33-001-3833
Bumper

330013833
92020207: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-001-3365
Angle Bracket

330013365
92014015: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-154-4945
Mounting Bracket

331544945
818651: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-105-7293
Flush Bolt

331057293
-80501-01C00: RNCC: 3 | RNVC: 2

9 May 1996

5340-33-105-1176
Support Hook

331051176
CMA90100-1/9: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-200-4393
Elastic Strap

332004393
WQ 883 020 A: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-200-4416
Lock-Release Lever

332004416
WW 286 197 B: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-209-5749
Utility Resilient Mount

332095749
130004: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-33-157-7355
Angle Bracket

331577355
502917: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-0967
Loop Clamp

331070967
33415135: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-157-0220
Access Cover

331570220
-16830-G5501: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-2292
Bow Handle

332012292
2736.04.62: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-145-6431
Loop Clamp

331456431
TAB. C9-4: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-7798
Access Cover

330047798
-10105119-0: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-33-001-8147
Block Clamp

330018147
35-51212-0401: RNCC: 3 | RNVC: 2

18 Mar 1991

5340-33-003-1363
Webbing Strap

330031363
LE408-0437: RNCC: 3 | RNVC: 2

31 Oct 1995

5340-33-200-1274
Retaining Strap

332001274
000 831 03 83: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-154-0256
Butt Hinge

331540256
801189: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-202-9128
Mounting Bracket

332029128
1025-901778: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-103-0381
Mounting Bracket

331030381
F-1-59: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-1811
Angle Bracket

331081811
7054.252.0403: RNCC: 3 | RNVC: 2
2540700051: RNCC: 5 | RNVC: 2

29 Jan 2001

5340-33-157-8514
Angle Bracket

331578514
772246: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-33-108-0832
Mounting Bracket

331080832
313505: RNCC: 3 | RNVC: 2
313505: RNCC: 3 | RNVC: 2

28 Dec 2000

5340-33-116-3946
Mounting Bracket

331163946
EV-24137: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-7037
Padlock

331617037
303SP/70: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-201-9887
Access Cover

332019887
1025-900450: RNCC: 3 | RNVC: 2

9 Dec 2002

5340-33-160-7483
Retaining Clip

331607483
93.501.412: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-004-4837
Mounting Plate

330044837
NRC3895F1: RNCC: 3 | RNVC: 2

2 Jun 1999

5340-33-156-4633
Hinged Hasp

331564633
-88645-G3000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-7915
Angle Bracket

332047915
5037341: RNCC: 3 | RNVC: 2
1.124.52.009: RNCC: 5 | RNVC: 2

24 Jan 2006

5340-33-154-0394
Synchro Clamp

331540394
134418: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-155-9174
Mounting Bracket

331559174
312838: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-157-7513
Angle Bracket

331577513
543940: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-33-188-9842
Compression Cup

331889842
3 170 295: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-8882
Catch Strike

330028882
0007230503: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-154-0451
Expansion Plug

331540451
806223: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-157-7795
Blank Panel

331577795
616943: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-2961
Block Clamp

330012961
CAN68240: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-200-9077
Mounting Plate

332009077
2540902014: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-33-003-4169
Pipe Hanger

330034169
11.43486-0629: RNCC: 3 | RNVC: 2
11.43486-0629: RNCC: 5 | RNVC: 2

27 Aug 1997

5340-33-204-0370
Webbing Strap

332040370
PS-911740: RNCC: 3 | RNVC: 2

8 Feb 2005

5340-33-204-1176
Loop Clamp

332041176
PS-610338: RNCC: 3 | RNVC: 2

31 Mar 2005

5340-33-160-3796
Retaining Strap

331603796
26.141.649: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-6678
Retaining Strap

330006678
560235: RNCC: 1 | RNVC: 2

7 Sep 1988

5340-33-154-4933
Mounting Bracket

331544933
584101: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-188-9473
Hinged Hasp

331889473
1690022: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-188-9792
Access Cover

331889792
3 170 108: RNCC: 3 | RNVC: 2

25 Sep 1995

5340-33-001-1186
Mounting Bracket

330011186
35-49128-0005: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-160-6160
Mounting Bracket

331606160
95.537.290: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-187-5534
Loop Clamp

331875534
0201407-6: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-4251
Mortise Lock Set

330044251
-01605002-1: RNCC: 3 | RNVC: 2

25 Mar 1999

5340-33-115-9356
Angle Bracket

331159356
6.325.1.637.001.4: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-1367
Mounting Bracket

332021367
5007291: RNCC: 3 | RNVC: 2

28 Jan 2003

5340-33-002-4859
Access Cover

330024859
212-24100-59-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-004-2284
Access Cover

330042284
1350083: RNCC: 3 | RNVC: 2

21 Sep 1998

5340-33-154-0559
Mending Plate

331540559
784769: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-107-0972
Loop Clamp

331070972
22356-11: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-153-9683
Door Handle

331539683
731504: RNCC: 3 | RNVC: 2

4 Jan 1990

5340-33-001-1969
Angle Bracket

330011969
35-66549-1301: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-188-9844
Compression Cup

331889844
3 170 300: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-4551
Mechanical Stop

331614551
1716.00.3: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-116-5075
Angle Bracket

331165075
3038877: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-0454
Expansion Plug

331540454
807901: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-206-1201
Utility Access Door

332061201
SEOD111220: RNCC: 3 | RNVC: 2

22 Aug 2007

5340-33-001-1000
Mounting Bracket

330011000
35-46689-0501: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-4716
Mounting Bracket

330014716
92026733: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-204-7964
Mounting Plate

332047964
PS-911679: RNCC: 3 | RNVC: 2

25 Jan 2006

5340-33-001-1639
Mounting Bracket

330011639
35-61117-0202: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-5242
Retaining Strap

330015242
92032006: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-160-3844
Mounting Plate

331603844
95.592.771: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-0338
Mending Plate

331160338
BM-12282010: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-2193
Utility Access Door

332012193
A2810590-401: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-104-9127
Retaining Strap

331049127
-24222-01A99: RNCC: 3 | RNVC: 2

12 Sep 1995

5340-33-200-3644
Loop Clamp

332003644
C 4163 151 G: RNCC: 3 | RNVC: 2

21 Jan 2002

5340-33-107-2850
Expansion Plug

331072850
122057: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-33-157-2144
Bow Handle

331572144
619422: RNCC: 3 | RNVC: 2
15100037: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-33-203-8756
Mounting Bracket

332038756
114650-55230: RNCC: 3 | RNVC: 2

15 Dec 2004

5340-33-205-5524
Angle Bracket

332055524
95-25904-0704: RNCC: 3 | RNVC: 2

15 Dec 2006

5340-33-202-9583
Mounting Bracket

332029583
223552783-01: RNCC: 3 | RNVC: 2
223552783: RNCC: 5 | RNVC: 1

15 Dec 2003

5340-33-202-9877
Mounting Plate

332029877
223552104-03: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-106-9402
Mounting Plate

331069402
190778: RNCC: 3 | RNVC: 2

7 Apr 1999

5340-33-114-5046
Detent Plunger

331145046
5TG 5-213: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-116-6590
Rod End Clevis

331166590
M-56-10: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-2539
Angle Bracket

330012539
AC760264-00: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-209-5441
Utility Resilient Mount

332095441
CE-1046-A02: RNCC: 3 | RNVC: 2
5340900325: RNCC: 5 | RNVC: 2

17 Jan 2012

5340-33-106-7308
Door Closer

331067308
00.431.552.00: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-107-6458
Plain Solid Disk

331076458
7051.252.0017: RNCC: 3 | RNVC: 2
2590700005: RNCC: 5 | RNVC: 2

3 May 2000

5340-33-003-4789
Utility Access Door

330034789
105 6912: RNCC: 3 | RNVC: 2

5 Nov 1997

5340-33-203-1484
Mounting Bracket

332031484
9673.250.6390: RNCC: 3 | RNVC: 2
2540900805: RNCC: 5 | RNVC: 2
2540900805: RNCC: 5 | RNVC: 2

6 Feb 2004

5340-33-205-9842
Retaining Strap

332059842
980628: RNCC: 3 | RNVC: 2

11 Jun 2007

5340-33-205-2430
Mounting Bracket

332052430
CBD56501P01: RNCC: 3 | RNVC: 2

30 Jun 2006

5340-33-000-6972
Loop Clamp

330006972
643754: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-005-0603
Angle Bracket

330050603
NN60145P01: RNCC: 3 | RNVC: 2

13 Jun 2000

5340-33-157-8509
Angle Bracket

331578509
770749: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-7703
Angle Bracket

331557703
692058: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-108-2566
Elbow Catch

331082566
9644.251.0820: RNCC: 3 | RNVC: 2
2510009783: RNCC: 5 | RNVC: 2
2510009783: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-180-7408
Access Cover

331807408
333202: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-4948
Compression Cup

330014948
92027610: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-181-6534
Angle Bracket

331816534
-02300285-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-116-7045
Angle Bracket

331167045
1-A-128.282: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-190-3536
Mounting Bracket

331903536
3-89262: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-145-5898
Loop Clamp

331455898
TAB. H1-3: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-114-4837
Mounting Bracket

331144837
10 ILA 8-1: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-001-4793
Angle Bracket

330014793
92026832: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-190-2537
Retaining Strap

331902537
3218: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-205-0105
Access Cover

332050105
19623103: RNCC: 3 | RNVC: 2

30 Mar 2006

5340-33-201-4179
Butt Hinge

332014179
-57241-G9600: RNCC: 3 | RNVC: 2

9 Jul 2002

5340-33-209-4567
Utility Guard Rail Section

332094567
0663.20.3002.00: RNCC: 3 | RNVC: 2

26 Dec 2011

5340-33-003-3894
Mechanical Stop

330033894
11.20337-0036: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-202-5166
Mounting Bracket

332025166
722421711-01: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-33-000-6670
Retaining Strap

330006670
540711: RNCC: 1 | RNVC: 2

6 Sep 1988

5340-33-000-7030
Loop Clamp

330007030
3090212449: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-000-0452
Angle Bracket

330000452
H350GS/D036: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-004-6114
Eye Hook

330046114
85.10.05.CT.69: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-33-154-5504
Retaining Strap

331545504
146975: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-33-154-6554
Loop Clamp

331546554
786892: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-001-3605
Angle Bracket

330013605
92018231: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-108-3654
Blank Panel

331083654
9560 079 53100: RNCC: 3 | RNVC: 2

28 Feb 2001

5340-33-102-0064
Access Cover

331020064
2510-000006: RNCC: 3 | RNVC: 2
2510000006: RNCC: 5 | RNVC: 2
411.097.0003: RNCC: 5 | RNVC: 2

6 Aug 1992

5340-33-002-8525
Mounting Bracket

330028525
35-82287-0001: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-106-3339
Angle Bracket

331063339
768801: RNCC: 3 | RNVC: 2

11 Sep 1997

5340-33-002-9453
Butt Hinge

330029453
6316250551: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-126-2297
Angle Bracket

331262297
H11930/2/34: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-33-002-4787
Door Hook And Eye

330024787
212-21123-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-001-1286
Mounting Bracket

330011286
35-52128-0002: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-160-3667
Expansion Plug

331603667
FC-4009: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-4735
Mounting Bracket

332114735
TOM0202805: RNCC: 3 | RNVC: 2
TOM0202805: RNCC: 3 | RNVC: 2

16 Nov 2013

5340-33-106-4739
Rod End Clevis

331064739
0160070: RNCC: 3 | RNVC: 2
ALMCTI-1000000160070: RNCC: 5 | RNVC: 1

6 Mar 1998

5340-33-001-1720
Mounting Plate

330011720
35-61356-0104: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-202-5158
Mounting Bracket

332025158
222422540-01: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-33-001-0945
Mounting Bracket

330010945
35-46643-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-4771
Access Cover

330014771
92026805: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-205-5006
Angle Bracket

332055006
W290614917000: RNCC: 3 | RNVC: 2

22 Nov 2006

5340-33-155-7736
Angle Bracket

331557736
616502: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-206-3930
Mounting Bracket

332063930
0852320010200: RNCC: 3 | RNVC: 2

17 Dec 2007

5340-33-107-4131
Mounting Bracket

331074131
7062.252.0340: RNCC: 3 | RNVC: 2
2510700487: RNCC: 5 | RNVC: 2

15 Oct 1999

5340-33-004-3838
Friction Catch Stud

330043838
212-21177-25-1: RNCC: 3 | RNVC: 2

15 Mar 1999

5340-33-200-0436
Retaining Clip

332000436
MAM-AV-10-09-00: RNCC: 3 | RNVC: 2

28 Sep 2001

5340-33-116-3929
Mounting Bracket

331163929
EV-2416: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-6495
Loop Clamp

332046495
20106: RNCC: 3 | RNVC: 2

21 Nov 2005

5340-33-203-3453
Angle Bracket

332033453
CS-EF2-AG1040804: RNCC: 3 | RNVC: 2

3 Mar 2004

5340-33-001-1345
Mounting Bracket

330011345
35-53224-0002: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-4877
Bumper

330014877
92027528: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-206-1967
Mounting Bracket

332061967
CBD58505P36: RNCC: 3 | RNVC: 2

24 Sep 2007

5340-33-001-0925
Mounting Bracket

330010925
35-46637-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-000-0498
Access Hole Frame

330000498
H350GS/D001: RNCC: 1 | RNVC: 2

13 Mar 1997

5340-33-102-0813
Retaining Strap

331020813
E-0-13: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-106-1417
Snap Hook

331061417
300MN61033: RNCC: 3 | RNVC: 2
CTI/CPT0044B/97 MOSQUETON: RNCC: 4 | RNVC: 1
MOSQUETON CHAPA NIQUEL TIEN.MOD.: RNCC: 6 | RNVC: 9

7 Apr 1997

5340-33-154-2225
Mending Plate

331542225
575952: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-001-0202
Mounting Bracket

330010202
35-43326-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-0760
Mounting Bracket

330010760
35-46374-0102: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-102-0406
Catch Strike

331020406
2510-000358: RNCC: 3 | RNVC: 2
411.096.1316: RNCC: 5 | RNVC: 2
2510000358: RNCC: 5 | RNVC: 2

6 Aug 1992

5340-33-205-9594
Retaining Clip

332059594
01554-00061: RNCC: 3 | RNVC: 2

31 May 2007

5340-33-003-5081
Lever Bracket

330035081
95577781: RNCC: 3 | RNVC: 2

13 Nov 1997

5340-33-108-6980
Mounting Plate

331086980
7059.252.0032: RNCC: 3 | RNVC: 2
2510700705: RNCC: 5 | RNVC: 2

14 Jun 2001

5340-33-003-7815
Retaining Strap

330037815
259700: RNCC: 3 | RNVC: 2
CTG1355: RNCC: 5 | RNVC: 2

5 Jun 1998

5340-33-201-2528
Mending Plate

332012528
1025-901672: RNCC: 3 | RNVC: 2

11 Jun 2002

5340-33-181-3567
Loop Clamp

331813567
-376832-X1: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-202-5887
Threaded Rod End

332025887
751449: RNCC: 3 | RNVC: 2

22 Aug 2003

5340-33-001-1722
Mounting Bracket

330011722
35-61360-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-200-6240
Access Cover

332006240
CE300161-0101: RNCC: 3 | RNVC: 2

8 Feb 2002

5340-33-204-5715
Clamping Catch

332045715
26364: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-33-204-0815
Webbing Strap

332040815
02512455: RNCC: 3 | RNVC: 2

10 Mar 2005

5340-33-204-6408
Lever Bracket

332046408
0850482030700: RNCC: 3 | RNVC: 2

17 Nov 2005

5340-33-154-6930
Angle Bracket

331546930
321715: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-204-4559
Flange Protector

332044559
PS-310053: RNCC: 3 | RNVC: 2

15 Sep 2005

5340-33-160-4515
Access Cover

331604515
97.500.379: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-6071
Lever Bracket

331606071
91.517.650: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-4812
Access Cover

330014812
92027120: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-208-7780
Utility Access Door

332087780
TALL-401-001-00: RNCC: 3 | RNVC: 2

21 Feb 2011

5340-33-200-1851
Access Cover

332001851
J57461515-002: RNCC: 3 | RNVC: 2

29 Oct 2001

5340-33-106-6775
Door Handle

331066775
-80607-07C00: RNCC: 3 | RNVC: 2

28 Dec 1998

5340-33-116-8313
Mechanical Stop

331168313
M4T403-01-16: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-9843
Handle Grip

332049843
55V-26241-00: RNCC: 3 | RNVC: 2

21 Mar 2006

5340-33-107-4839
Access Cover

331074839
77 00 706 217: RNCC: 3 | RNVC: 2

24 Nov 1999

5340-33-200-8555
Mounting Bracket

332008555
9644.251.6070: RNCC: 3 | RNVC: 2
2530001007: RNCC: 5 | RNVC: 2
2530001007: RNCC: 5 | RNVC: 2

5 Apr 2002

5340-33-211-2574
Angle Bracket

332112574
TP280101: RNCC: 3 | RNVC: 2

30 Jul 2013

5340-33-104-8977
Hinged Hasp

331048977
731925: RNCC: 3 | RNVC: 2

12 Sep 1995

5340-33-115-9120
Mounting Plate

331159120
16954-ZE1-811: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-8920
Mounting Plate

332008920
W290698608100: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-33-003-4408
Leather Strap

330034408
SP-00474: RNCC: 3 | RNVC: 2
SP00438: RNCC: 5 | RNVC: 1

5 Sep 1997

5340-33-206-4302
Mounting Bracket

332064302
M.A.S. 8482-37: RNCC: 3 | RNVC: 2

10 Jan 2008

5340-33-145-6365
Access Cover

331456365
77200006-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-8562
Stand Base

332048562
EP.63640-M-7-2: RNCC: 3 | RNVC: 2

15 Feb 2006

5340-33-205-1041
Filler Opening Cap

332051041
39051-2: RNCC: 3 | RNVC: 2

3 May 2006

5340-33-204-5431
Mounting Bracket

332045431
703534205: RNCC: 3 | RNVC: 2

10 Oct 2005

5340-33-200-4294
Angle Bracket

332004294
7054.592.0011: RNCC: 3 | RNVC: 2
2510701103: RNCC: 5 | RNVC: 2

25 Jan 2002

5340-33-126-4211
Angle Bracket

331264211
C22156-N1000-C5: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-160-3664
Vent Plug

331603664
EV-2460: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-8271
Angle Bracket

331578271
747160: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-2609
Mounting Bracket

331082609
9644.121.0140: RNCC: 3 | RNVC: 2
2510010269: RNCC: 5 | RNVC: 2
2510010269: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-202-6539
Access Cover

332026539
223551391-01: RNCC: 3 | RNVC: 2

22 Sep 2003

5340-33-001-0774
Mounting Bracket

330010774
35-46383-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-004-3247
Mending Plate

330043247
1 005 823 322: RNCC: 3 | RNVC: 2

29 Jan 1999

5340-33-188-7511
Loop Clamp

331887511
6.0401.53.0.0200: RNCC: 3 | RNVC: 2

21 Sep 1995

5340-33-160-7560
Plug Button

331607560
95.608.999: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-211-4057
Mounting Bracket

332114057
10-25048-0001: RNCC: 3 | RNVC: 2

21 Oct 2013

5340-33-000-0417
Mending Plate

330000417
H3590109/CI: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-200-2150
Locking Stay

332002150
J92562145-001: RNCC: 3 | RNVC: 2

5 Nov 2001

5340-33-001-5710
Compression Cup

330015710
92042313: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-106-9665
Cushioning Pad

331069665
420813: RNCC: 3 | RNVC: 2
SP07508: RNCC: 5 | RNVC: 2

18 May 1999

5340-33-202-7982
Swivel Caster

332027982
14-27/A-125L: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-33-001-1328
Mounting Bracket

330011328
35-53162-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-158-7841
Turnbuckle

331587841
03-270-907: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-33-200-6699
Loop Clamp

332006699
319636: RNCC: 3 | RNVC: 2

22 Feb 2002

5340-33-206-1966
Mounting Bracket

332061966
CBD58505P34: RNCC: 3 | RNVC: 2

24 Sep 2007

5340-33-204-3421
Retaining Bail

332043421
PS-310027: RNCC: 3 | RNVC: 2

18 Jul 2005

5340-33-105-9590
Access Cover

331059590
A52-24-05: RNCC: 3 | RNVC: 2

18 Sep 1996

5340-33-211-1943
Mounting Bracket

332111943
10-62301-0001: RNCC: 3 | RNVC: 2

8 Jul 2013

5340-33-204-8938
Mounting Bracket

332048938
35671-29F00: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-126-5766
Rod End Connector

331265766
G38212-R-0600: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-210-3709
Plug Button

332103709
CAN68040B3: RNCC: 3 | RNVC: 2
69B100B16: RNCC: 5 | RNVC: 2

25 Sep 2012

5340-33-160-6497
Turnbuckle Body

331606497
93.501.404: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-4651
Detent Plunger

332004651
WW 488 378 A: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-33-201-5676
Access Cover

332015676
126405: RNCC: 3 | RNVC: 2

4 Sep 2002

5340-33-002-5327
Handwheel

330025327
212-46115-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-202-9845
Mounting Bracket

332029845
223553705-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-157-8544
Mending Plate

331578544
783558: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-158-1023
Mounting Bracket

331581023
511264: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-6199
Loop Clamp

332046199
08015-86CA0: RNCC: 3 | RNVC: 2

7 Nov 2005

5340-33-161-7032
Padlock

331617032
302/30: RNCC: 3 | RNVC: 2
F12201010: RNCC: 5 | RNVC: 2

26 Apr 1995

5340-33-157-0127
Access Cover

331570127
-76830-G2590: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-1339
Access Cover

331081339
310924: RNCC: 3 | RNVC: 2
310924: RNCC: 5 | RNVC: 2

28 Dec 2000

5340-33-106-7867
Angle Bracket

331067867
7356.292.0151: RNCC: 3 | RNVC: 2
2510010317: RNCC: 5 | RNVC: 2

17 Mar 1999

5340-33-003-4399
Leather Strap

330034399
SP-00440: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-107-9611
Mounting Bracket

331079611
00.900.10.250: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-33-105-0111
Access Door Hinge

331050111
23 0004: RNCC: 3 | RNVC: 2
230335: RNCC: 3 | RNVC: 2

12 Sep 1995

5340-33-106-8318
Mounting Bracket

331068318
W280675512004: RNCC: 3 | RNVC: 2

5 Apr 1999

5340-33-105-1902
Mounting Bracket

331051902
00538: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-156-5008
Loop Clamp

331565008
-46289-01C04: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-9067
Mounting Plate

332029067
223552702-01: RNCC: 3 | RNVC: 2
223552702: RNCC: 5 | RNVC: 1

27 Nov 2003

5340-33-157-8414
Blank Panel

331578414
752401: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-4521
Cushioning Pad

332044521
720301008: RNCC: 3 | RNVC: 2

15 Sep 2005

5340-33-154-5553
Retaining Strap

331545553
754660: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-102-1447
Handwheel

331021447
B-3-29: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-200-5816
Mounting Plate

332005816
IN-050-1977/78-E06I.CC02: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-33-200-0207
Block Clamp

332000207
WW 488 102: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-33-108-4155
Access Cover

331084155
9644.810.0170: RNCC: 3 | RNVC: 2
1005003827: RNCC: 5 | RNVC: 2
1005003827: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-204-3108
Loop Clamp

332043108
706150023: RNCC: 3 | RNVC: 2

30 Jun 2005

5340-33-126-5110
Access Cover

331265110
C22165-A1000-C331: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-0333
Mending Plate

331160333
BB-11281020: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-0779
Mounting Bracket

330010779
35-46388-0002: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-116-5538
Access Cover

331165538
19610-ZE1-000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-2360
Angle Bracket

331612360
5340-000673: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-33-004-2657
Access Cover

330042657
730096302: RNCC: 3 | RNVC: 2

12 Nov 1998

5340-33-154-5551
Retaining Strap

331545551
753469: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-001-5206
Access Cover

330015206
92030407: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-205-2177
Mounting Bracket

332052177
CBD50542P26: RNCC: 3 | RNVC: 2

23 Jun 2006

5340-33-205-4429
Protection Bellows

332054429
1025900864: RNCC: 3 | RNVC: 2
9682.101.1605: RNCC: 5 | RNVC: 2

29 Sep 2006

5340-33-188-9774
Mending Plate

331889774
3 170 132: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-126-6191
Mounting Plate

331266191
PT17070: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-0748
Loop Clamp

332010748
4730700022: RNCC: 3 | RNVC: 2

29 Apr 2002

5340-33-144-6351
Mounting Bracket

331446351
G 155754: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-0808
Webbing Strap

332040808
02512559: RNCC: 3 | RNVC: 2
02517012: RNCC: 5 | RNVC: 2

10 Mar 2005

5340-33-000-6965
Loop Clamp

330006965
590469: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-157-7908
Access Cover

331577908
639004: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-105-0607
Hinged Hasp

331050607
PCT0046: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-204-7928
Mounting Bracket

332047928
291620-7: RNCC: 3 | RNVC: 2

24 Jan 2006

5340-33-107-8832
Mounting Plate

331078832
W290683103300: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-33-001-3575
Angle Bracket

330013575
92018115: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-202-0563
Access Cover

332020563
1025-900452: RNCC: 3 | RNVC: 2

2 Jan 2003

5340-33-102-1748
Mounting Bracket

331021748
SP-03051: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-200-6709
Mounting Bracket

332006709
OZC-03-101: RNCC: 3 | RNVC: 2

22 Feb 2002

5340-33-001-4117
Compression Cup

330014117
92022112: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-160-6500
Threaded Rod End

331606500
94.05.846.598: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-103-2500
Access Cover

331032500
2590-000066: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-7015
Mounting Bracket

332027015
9673.250.5784: RNCC: 3 | RNVC: 2
2510901820: RNCC: 5 | RNVC: 2
2510901820: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-126-4113
Loop Clamp

331264113
C39104-Z43-C13: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-003-0790
Ball Socket Seat

330030790
04505004-0: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-211-3005
Mounting Plate

332113005
5061558: RNCC: 3 | RNVC: 2
1.164.91.017: RNCC: 5 | RNVC: 2

13 Aug 2013

5340-33-155-7495
Mending Plate

331557495
682302: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-126-2338
Mounting Plate

331262338
H11930/2/19: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-0329
Mending Plate

331160329
AM-12285020: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-5774
Rod End Clevis

332055774
CBD58504P35: RNCC: 3 | RNVC: 2

21 Dec 2006

5340-33-155-7781
Angle Bracket

331557781
766383: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-004-7085
Angle Bracket

330047085
NN60398: RNCC: 1 | RNVC: 2
NN60398G01: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-33-203-9493
Access Cover

332039493
20880699: RNCC: 3 | RNVC: 2
33R288279: RNCC: 5 | RNVC: 1

27 Jan 2005

5340-33-116-8595
Mounting Bracket

331168595
598/50-7: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-105-0545
Mounting Plate

331050545
RAL-200-2-12-4: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-201-4045
Mending Plate

332014045
A2810524-001: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-205-5204
Section Block Clamp

332055204
4312-711-3653E: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-33-200-1306
Door Hook

332001306
323571: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-125-6048
Loop Clamp

331256048
W267014170001: RNCC: 3 | RNVC: 2

13 Sep 1995

5340-33-107-8280
Hook Handle

331078280
235145: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-33-181-3266
Rod End Clevis

331813266
-163115-1: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-1310
Angle Bracket

332001310
324043: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-126-4200
Angle Bracket

331264200
C22136-N1000-C2: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-106-3682
Loop Clamp

331063682
16883: RNCC: 3 | RNVC: 2

28 Nov 1997

5340-33-202-7981
Webbing Strap

332027981
SE-11056: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-33-160-3049
Loop Clamp

331603049
35.53: RNCC: 3 | RNVC: 9

17 Nov 1992

5340-33-202-4628
Door Holder

332024628
23509301: RNCC: 3 | RNVC: 2

25 Jun 2003

5340-33-161-2870
Mechanical Stop

331612870
125634: RNCC: 3 | RNVC: 2

20 Jul 1995

Load More Results