What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 25 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 25 of 39

5340-33-203-1494
Access Cover

332031494
9673.250.5810: RNCC: 3 | RNVC: 2
2540900584: RNCC: 5 | RNVC: 2
2540900584: RNCC: 5 | RNVC: 2

6 Feb 2004

5340-33-157-9916
Access Cover

331579916
625089: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3315
Angle Bracket

330013315
92012601: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-157-0174
Access Cover

331570174
-89461-Y9500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-1583
Angle Bracket

330021583
921.267.09: RNCC: 3 | RNVC: 2

1 Jul 1993

5340-33-154-0273
Butt Hinge

331540273
814310: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-106-5707
Expansion Plug

331065707
1345683: RNCC: 3 | RNVC: 2
1345683: RNCC: 5 | RNVC: 2

9 Jul 1998

5340-33-102-0130
Turnbuckle

331020130
2510-000139: RNCC: 3 | RNVC: 2
411.090.0450: RNCC: 5 | RNVC: 2

2 Jan 1995

5340-33-190-5718
Clamp Bolt Assembly

331905718
43176590-001: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-4434
Mounting Bracket

332004434
WW 321 578 -R: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-200-8658
Angle Bracket

332008658
7562.252.0269: RNCC: 3 | RNVC: 2

5 Apr 2002

5340-33-001-4957
Access Cover

330014957
92027619: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-158-2718
Pipe Hanger

331582718
634838: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-7004
Loop Clamp

330007004
802766: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-157-7994
Access Cover

331577994
671146: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-9507
Access Cover

332039507
20880702: RNCC: 3 | RNVC: 2
33R288292: RNCC: 5 | RNVC: 1

27 Jan 2005

5340-33-200-8557
Mounting Bracket

332008557
9644.251.5275: RNCC: 3 | RNVC: 2
2530001009: RNCC: 5 | RNVC: 2
2530001009: RNCC: 5 | RNVC: 2

5 Apr 2002

5340-33-108-5314
Webbing Strap

331085314
9644.251.0357: RNCC: 3 | RNVC: 2
1005006521: RNCC: 5 | RNVC: 2
1005006521: RNCC: 5 | RNVC: 2

23 Apr 2001

5340-33-106-9976
Mounting Bracket

331069976
-01505079-3: RNCC: 3 | RNVC: 2

25 May 1999

5340-33-103-0017
Mounting Bracket

331030017
919-4-1: RNCC: 3 | RNVC: 2

25 Jul 1995

5340-33-002-4843
Threaded Rod End

330024843
212-22131-31-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-200-5905
Loop Clamp

332005905
WG 423 218 A: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-204-0378
Mounting Plate

332040378
9.303.1.754.004.5: RNCC: 3 | RNVC: 2

8 Feb 2005

5340-33-200-3979
Angle Bracket

332003979
CF 814 311 A: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-102-9724
Plug Button

331029724
301202: RNCC: 3 | RNVC: 2

13 Sep 1995

5340-33-001-2051
Shimmy Damper

330012051
35-71100-2001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-005-2482
Support Hook

330052482
D0931311267: RNCC: 3 | RNVC: 2

21 Feb 2001

5340-33-004-2781
Access Cover

330042781
230030007: RNCC: 3 | RNVC: 2

25 Nov 1998

5340-33-105-9606
Mounting Plate

331059606
A52-01-07: RNCC: 3 | RNVC: 2

13 Feb 1997

5340-33-204-4234
Angle Bracket

332044234
W280698449401: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-103-2194
Loop Clamp

331032194
9500.00.644318: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-126-8118
Mounting Plate

331268118
640375: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-6752
Webbing Strap

330046752
1005-006674: RNCC: 3 | RNVC: 2

28 Jul 1999

5340-33-187-5589
Loop Clamp

331875589
0301129-9: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-9089
Access Cover

332029089
40.18.16.0003.0: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-181-7808
Angle Bracket

331817808
-07700272-2: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-187-5594
Loop Clamp

331875594
0301155-5: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-190-3502
Mending Plate

331903502
3-88680: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-203-4996
Angle Bracket

332034996
NN60475P01: RNCC: 3 | RNVC: 2

1 May 2004

5340-33-200-2668
Access Door Hinge

332002668
100402011100: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-33-203-2768
Mounting Bracket

332032768
9673.250.5360: RNCC: 3 | RNVC: 2
2510900634: RNCC: 5 | RNVC: 2
2510900634: RNCC: 5 | RNVC: 2

20 Feb 2004

5340-33-200-1662
Mounting Plate

332001662
28110602: RNCC: 3 | RNVC: 2

26 Oct 2001

5340-33-190-3792
Angle Bracket

331903792
1257: RNCC: 3 | RNVC: 2
1257: RNCC: 5 | RNVC: 2

1 Aug 1995

5340-33-104-0417
Utility Access Door

331040417
631 730 05 03: RNCC: 3 | RNVC: 2

24 Apr 1995

5340-33-002-8564
Bumper

330028564
411.090.0926: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-33-116-0332
Mending Plate

331160332
BB-17181000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-3534
Rod End Clevis

332033534
CS-EF2-AG1040904-1: RNCC: 3 | RNVC: 2

5 Mar 2004

5340-33-201-6028
Mounting Plate

332016028
9644.121.0095: RNCC: 3 | RNVC: 2
2510010745: RNCC: 5 | RNVC: 2
2510010745: RNCC: 5 | RNVC: 2

5 Sep 2002

5340-33-190-3979
Support Hook

331903979
1334: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-202-9998
Locking Stay

332029998
GUIEX802552926G0: RNCC: 3 | RNVC: 2

29 Dec 2003

5340-33-202-6607
Access Cover

332026607
9673.250.0830: RNCC: 3 | RNVC: 2
2510900822: RNCC: 5 | RNVC: 2
2510900822: RNCC: 5 | RNVC: 2

23 Sep 2003

5340-33-190-5484
Access Cover

331905484
43188057-010: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-203-5487
Butt Hinge

332035487
80040002: RNCC: 3 | RNVC: 2

25 May 2004

5340-33-003-7103
Door Hook

330037103
5340000178: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-33-204-4604
Mounting Bracket

332044604
CBD50503P28: RNCC: 3 | RNVC: 2

16 Sep 2005

5340-33-157-8486
Angle Bracket

331578486
760020: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-8733
Clamp Bolt Assembly

331558733
616563: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-005-3446
Loop Clamp

330053446
MTU0919-101-30: RNCC: 3 | RNVC: 2
5099970090: RNCC: 5 | RNVC: 2

2 Jul 2001

5340-33-106-5333
Furniture Cup

331065333
C0601040: RNCC: 3 | RNVC: 2
PCAMI/RP/32C0601040: RNCC: 4 | RNVC: 1
060104: RNCC: 5 | RNVC: 1

13 Apr 1998

5340-33-203-5965
Access Cover

332035965
999050362: RNCC: 3 | RNVC: 2
999050362: RNCC: 5 | RNVC: 2

8 Jun 2004

5340-33-203-1881
Access Cover

332031881
9673.250.5986: RNCC: 3 | RNVC: 2
2540901527: RNCC: 5 | RNVC: 2
2540901527: RNCC: 5 | RNVC: 2

12 Feb 2004

5340-33-204-9638
Bridge Clamp

332049638
0219683: RNCC: 3 | RNVC: 2

28 Feb 2006

5340-33-200-1213
Mounting Bracket

332001213
323717: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-157-0206
Access Cover

331570206
-33154-G9500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-9510
Access Cover

332039510
20880705: RNCC: 3 | RNVC: 2
33R288309: RNCC: 5 | RNVC: 1

27 Jan 2005

5340-33-190-3951
Mounting Bracket

331903951
1817: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-190-3947
Runner

331903947
1330-500: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-161-3506
Mechanical Stop

331613506
578453: RNCC: 3 | RNVC: 2
578453: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-33-155-2126
Pipe Hanger

331552126
24,7.371: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-33-126-4356
Mounting Bracket

331264356
S22717-N1000-Q2-A119: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-1181
Mounting Bracket

331031181
375.091.0050: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-0427
Mounting Bracket

331550427
A1205: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-161-5461
Rod End Clevis

331615461
561590: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-5153
Retaining Strap

330015153
92030209: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-108-4575
Access Cover

331084575
9644.591.5260: RNCC: 3 | RNVC: 2
2920000101: RNCC: 5 | RNVC: 2
2920000101: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-190-3887
Loop Clamp

331903887
5975000821: RNCC: 3 | RNVC: 2
2244: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-200-0043
Hook Handle

332000043
230820: RNCC: 3 | RNVC: 2

14 Sep 2001

5340-33-103-0654
Mounting Bracket

331030654
MD-C-4-100-500: RNCC: 3 | RNVC: 2
MD-C-4-100-500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-8095
Mounting Bracket

332038095
10-61180-0104-00: RNCC: 3 | RNVC: 2

29 Oct 2004

5340-33-201-9482
Angle Bracket

332019482
A2811835-001: RNCC: 3 | RNVC: 2

20 Nov 2002

5340-33-201-2044
T Bracket

332012044
51952-002MAS: RNCC: 3 | RNVC: 2

30 May 2002

5340-33-002-1541
Mounting Bracket

330021541
317959: RNCC: 3 | RNVC: 2
317959: RNCC: 5 | RNVC: 2

1 Jul 1993

5340-33-204-0813
Webbing Strap

332040813
02512454: RNCC: 3 | RNVC: 2
532533M267412: RNCC: 6 | RNVC: 9

10 Mar 2005

5340-33-108-3528
Mounting Plate

331083528
631 743 02 97: RNCC: 3 | RNVC: 2

28 Feb 2001

5340-33-154-5668
Mending Plate

331545668
5340001058: RNCC: 3 | RNVC: 2
317217: RNCC: 3 | RNVC: 2
317217: RNCC: 5 | RNVC: 9

1 Oct 1990

5340-33-201-4871
Mounting Bracket

332014871
1203008: RNCC: 3 | RNVC: 2

7 Aug 2002

5340-33-208-0476
Utility Guard Rail Section

332080476
0751020501: RNCC: 3 | RNVC: 2

28 Jan 2010

5340-33-202-6702
Utility Access Door

332026702
5034112: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-33-103-4709
Access Cover

331034709
3203.034: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-0426
Mounting Plate

330020426
20030-0/0-CR04: RNCC: 3 | RNVC: 2

7 Aug 1992

5340-33-103-7767
Rod End Clevis

331037767
739832: RNCC: 3 | RNVC: 2

7 Mar 1997

5340-33-209-3194
Bumper

332093194
22.03.386: RNCC: 3 | RNVC: 2

30 Sep 2011

5340-33-153-9681
Door Handle

331539681
731189: RNCC: 3 | RNVC: 2
15100060: RNCC: 5 | RNVC: 9

4 Jan 1990

5340-33-108-4434
Cushioning Pad

331084434
9644.250.6035: RNCC: 3 | RNVC: 2
2540001051: RNCC: 5 | RNVC: 2
2540001051: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-107-6848
Retaining Strap

331076848
20MMCH4408: RNCC: 3 | RNVC: 2

17 Apr 2000

5340-33-204-4538
Cushioning Pad

332044538
720124518: RNCC: 3 | RNVC: 2

15 Sep 2005

5340-33-106-8648
Mounting Plate

331068648
196987: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-108-2707
Mounting Bracket

331082707
9644.251.1710: RNCC: 3 | RNVC: 2
2510901058: RNCC: 5 | RNVC: 2
2510901058: RNCC: 5 | RNVC: 2

28 Feb 2001

5340-33-155-7783
Angle Bracket

331557783
801899: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-003-7535
Access Door Hinge

330037535
791227: RNCC: 3 | RNVC: 2

5 Jun 1998

5340-33-003-4019
Rod End Clevis

330034019
11.20374-1960: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-107-0663
Mounting Bracket

331070663
T501100100: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-33-000-7005
Loop Clamp

330007005
803444: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-205-8835
Protection Bellows

332058835
-30542-G2300: RNCC: 3 | RNVC: 2

30 Apr 2007

5340-33-106-4406
Loop Clamp

331064406
17308: RNCC: 3 | RNVC: 2

16 Feb 1998

5340-33-001-2762
Clamping Catch

330012762
CAN66057: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-33-180-7762
Rod End Connector

331807762
531324E1: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-155-7492
Mending Plate

331557492
755245: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-211-2978
Angle Bracket

332112978
TP252824: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-33-107-9758
Sliding Block

331079758
9644.250.5979: RNCC: 3 | RNVC: 2
2540001183: RNCC: 5 | RNVC: 2
2540001183: RNCC: 5 | RNVC: 2

2 Nov 2000

5340-33-004-5160
Mounting Bracket

330045160
194432: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-004-2649
Access Door Hinge

330042649
730096304: RNCC: 3 | RNVC: 2

12 Nov 1998

5340-33-001-0004
Angle Bracket

330010004
35-31279-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-211-3000
Mounting Plate

332113000
5061549: RNCC: 3 | RNVC: 2
1.164.91.011: RNCC: 5 | RNVC: 2

13 Aug 2013

5340-33-000-9865
Access Door Hinge

330009865
35-22070-2001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-205-5530
Stand Base

332055530
95-43441-0001: RNCC: 3 | RNVC: 2

15 Dec 2006

5340-33-203-9227
Blank Panel

332039227
055-13.01: RNCC: 3 | RNVC: 2

19 Jan 2005

5340-33-204-3755
Angle Bracket

332043755
NN60825P01: RNCC: 3 | RNVC: 2

18 Aug 2005

5340-33-200-5899
Mounting Plate

332005899
WG 407 616: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-155-9218
Mounting Bracket

331559218
316919: RNCC: 3 | RNVC: 2
316919: RNCC: 5 | RNVC: 9

29 Aug 1996

5340-33-155-7553
Mending Plate

331557553
646532: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-126-6192
Mounting Plate

331266192
PT17323: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-4347
Mending Plate

331604347
91.504.675: RNCC: 3 | RNVC: 2

27 Nov 1995

5340-33-102-0880
Mounting Bracket

331020880
C-2-31: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-211-2400
Mounting Bracket

332112400
MD02021: RNCC: 3 | RNVC: 2
87 99 00 02 1: RNCC: 5 | RNVC: 2

20 Jul 2013

5340-33-155-7483
Mending Plate

331557483
319517: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-202-4402
Mending Plate

332024402
14215102980: RNCC: 3 | RNVC: 2

4 Jun 2003

5340-33-106-8165
Mounting Bracket

331068165
2510009468: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-200-0849
Access Cover

332000849
7054.252.1780: RNCC: 3 | RNVC: 2
2510700963: RNCC: 5 | RNVC: 2

5 Oct 2001

5340-33-157-7881
Angle Bracket

331577881
633017: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-8329
Webbing Strap

332008329
9644.251.6225: RNCC: 3 | RNVC: 2
2590900063: RNCC: 5 | RNVC: 2
2590900063: RNCC: 5 | RNVC: 2

22 Mar 2002

5340-33-161-1514
Mounting Bracket

331611514
2510005672: RNCC: 3 | RNVC: 2
322008: RNCC: 3 | RNVC: 2
322008: RNCC: 5 | RNVC: 2

11 Dec 1992

5340-33-003-6794
Mounting Bracket

330036794
315318: RNCC: 3 | RNVC: 2
315318: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-155-6472
Butt Hinge

331556472
820358: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-157-7189
Loop Clamp

331577189
316885: RNCC: 3 | RNVC: 2
316885: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-1989
Door Closer

331551989
95.603.324: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-204-3087
Mounting Bracket

332043087
W280698413010: RNCC: 3 | RNVC: 2

29 Jun 2005

5340-33-154-5365
Expansion Plug

331545365
3340803271: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-001-3273
Compression Cup

330013273
92012110: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-155-7439
Mending Plate

331557439
141624.01: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-157-7276
Access Cover

331577276
319010: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-8957
Angle Bracket

330048957
NN60301P01: RNCC: 3 | RNVC: 2

28 Jan 2000

5340-33-181-1147
Retaining Strap

331811147
-16686-37501: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-202-4564
Butt Hinge

332024564
35-14147-0003: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-33-154-0192
Bow Handle

331540192
507057: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-201-2194
Access Cover

332012194
A2810402-001: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-161-2697
Mounting Bracket

331612697
2510005669: RNCC: 3 | RNVC: 2
319091: RNCC: 3 | RNVC: 2

27 Apr 1995

5340-33-154-6482
Loop Clamp

331546482
132199: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-33-200-7548
Access Cover

332007548
01111060: RNCC: 3 | RNVC: 2

6 Mar 2002

5340-33-000-6704
Retaining Strap

330006704
699213: RNCC: 1 | RNVC: 2

7 Sep 1988

5340-33-001-3308
Compression Cup

330013308
92012402: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-155-7700
Angle Bracket

331557700
694973: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-004-2834
Angle Bracket

330042834
NN60076P01: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-155-7486
Mending Plate

331557486
320069: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-104-0630
Mounting Bracket

331040630
731118: RNCC: 3 | RNVC: 2

13 Dec 1996

5340-33-157-7309
Blank Panel

331577309
320316: RNCC: 3 | RNVC: 2
320316: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-108-0232
Mounting Bracket

331080232
9644.251.6275: RNCC: 3 | RNVC: 2
2540900396: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-202-3431
Lever Bracket

332023431
91.03.01: RNCC: 3 | RNVC: 2

10 Apr 2003

5340-33-200-9399
Loop Clamp

332009399
46 659 912 02: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-33-107-4461
Loop Clamp

331074461
W267000010003: RNCC: 3 | RNVC: 2

13 Oct 1999

5340-33-202-9173
Loop Clamp

332029173
4730-900136: RNCC: 3 | RNVC: 2

28 Nov 2003

5340-33-157-7263
Blank Panel

331577263
318669: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-6702
Mounting Plate

330036702
2510001333: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-157-8496
Mending Plate

331578496
767122: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-189-2133
Angle Bracket

331892133
0900026: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-116-8643
Mounting Plate

331168643
598/12-2: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-4235
Mounting Plate

332014235
A2810578-401: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-33-103-1284
Access Hole Frame

331031284
375.090.0210: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3709
Compression Cup

330013709
92019313: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-200-4481
Mounting Plate

332004481
WW 386 370 A: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-002-0601
Pipe Hanger

330020601
C-20030-8/4-I-01-8: RNCC: 3 | RNVC: 2

7 Aug 1992

5340-33-206-0675
Mounting Plate

332060675
68245 40H00: RNCC: 3 | RNVC: 2
68245-40H00: RNCC: 5 | RNVC: 2

19 Jul 2007

5340-33-181-5815
Retaining Strap

331815815
-01201428: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-004-6710
Access Cover

330046710
721110510: RNCC: 3 | RNVC: 2

27 Jul 1999

5340-33-206-3222
Access Cover

332063222
191170018: RNCC: 3 | RNVC: 2
191170018: RNCC: 5 | RNVC: 2

7 Nov 2007

5340-33-190-2524
Pipe Hanger

331902524
8995000: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-106-7204
Door Handle

331067204
631 743 05 01: RNCC: 3 | RNVC: 2

22 Mar 1999

5340-33-104-1190
Padlock

331041190
002500: RNCC: 3 | RNVC: 2

22 Mar 1996

5340-33-115-8166
Access Cover

331158166
10502601050: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-107-4337
Mounting Plate

331074337
W290683108600: RNCC: 3 | RNVC: 2

13 Oct 1999

5340-33-002-4675
Flush Catch

330024675
CAN66017-040115: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-181-7450
Mechanical Stop

331817450
-06902256-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-205-2145
Flange Protector

332052145
CBD50509P75: RNCC: 3 | RNVC: 2

22 Jun 2006

5340-33-200-4969
Support Hook

332004969
19514102: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-105-1064
Bridge Clamp

331051064
42320010030: RNCC: 3 | RNVC: 2
42320010030: RNCC: 3 | RNVC: 2
VB-400-C-0410: RNCC: 5 | RNVC: 2

19 Nov 1997

5340-33-205-4033
Mounting Plate

332054033
5041068: RNCC: 3 | RNVC: 2
1.143.60.918: RNCC: 5 | RNVC: 2

14 Sep 2006

5340-33-000-2471
Expansion Plug

330002471
3340801449: RNCC: 1 | RNVC: 2

22 May 1987

5340-33-001-3854
Compression Cup

330013854
92020231: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-161-3285
Angle Bracket

331613285
532605: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-204-8393
Strap Hinge

332048393
9092.H6000: RNCC: 3 | RNVC: 2

14 Feb 2006

5340-33-004-6718
Access Cover

330046718
721113808: RNCC: 3 | RNVC: 2

27 Jul 1999

5340-33-106-9413
Mounting Plate

331069413
7356.252.0641: RNCC: 3 | RNVC: 2
1055001773: RNCC: 5 | RNVC: 2

7 Apr 1999

5340-33-107-4977
Angle Bracket

331074977
W290684501600: RNCC: 3 | RNVC: 2

1 Dec 1999

5340-33-211-6069
Mounting Bracket

332116069
0918289000500: RNCC: 3 | RNVC: 2

7 Dec 2013

5340-33-204-9445
Bow Handle

332049445
0700589: RNCC: 3 | RNVC: 2

24 Feb 2006

5340-33-104-9005
Access Cover

331049005
193051: RNCC: 3 | RNVC: 2

12 Sep 1995

5340-33-155-7530
Mending Plate

331557530
768083: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-201-4001
Angle Bracket

332014001
A2811370-405: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-107-1238
Doorknob

331071238
610103401: RNCC: 3 | RNVC: 2
PCAMI/RP/0361010341: RNCC: 6 | RNVC: 9

29 Jun 1999

5340-33-001-1180
Mounting Bracket

330011180
35-49124-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-157-7332
Blank Panel

331577332
321286: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-188-1920
Retaining Clip

331881920
JA 165251.00: RNCC: 3 | RNVC: 2

12 Jun 1995

5340-33-154-6569
Door Handle

331546569
751220: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-190-5599
Rod End Clevis

331905599
R43169695-001: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-205-4999
Angle Bracket

332054999
403141-A: RNCC: 3 | RNVC: 2
403141-A: RNCC: 5 | RNVC: 2
4720-33-M20-1779: RNCC: 6 | RNVC: 9

22 Nov 2006

5340-33-115-8647
Loop Clamp

331158647
RN-60-80R: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-33-204-4271
Mounting Bracket

332044271
W280698412003: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-200-5663
Angle Bracket

332005663
NN60510G01: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-33-116-3114
Angle Bracket

331163114
8506.090: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-0451
Snap Hook

332010451
5340900072: RNCC: 3 | RNVC: 2
5340900072: RNCC: 5 | RNVC: 2

24 Apr 2002

5340-33-106-7389
Pawl Fastener

331067389
U01432: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-200-1069
Angle Bracket

332001069
7063.252.0260: RNCC: 3 | RNVC: 2
2510701195: RNCC: 5 | RNVC: 2

8 Oct 2001

5340-33-004-7620
Catch Strike

330047620
-95410-A8600: RNCC: 3 | RNVC: 2
-95410-D8602: RNCC: 5 | RNVC: 2

7 Oct 1999

5340-33-106-2056
Retaining Clip

331062056
-01553-00401: RNCC: 3 | RNVC: 2

24 Oct 1997

5340-33-001-0082
Access Cover

330010082
35-34030-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-000-1164
Detent Plunger

330001164
1005-000626: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-33-108-6259
Mounting Plate

331086259
9644.250.5462: RNCC: 3 | RNVC: 2
2510007245: RNCC: 5 | RNVC: 2
2510007245: RNCC: 5 | RNVC: 2

30 Apr 2001

5340-33-108-0631
Retaining Strap

331080631
2510003425: RNCC: 3 | RNVC: 2

5 Dec 2000

5340-33-103-1858
Mounting Bracket

331031858
2530-000084: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-2727
Mounting Bracket

332032727
9673.250.6370: RNCC: 3 | RNVC: 2
2540900780: RNCC: 5 | RNVC: 2
2540900780: RNCC: 5 | RNVC: 2

19 Feb 2004

5340-33-161-2683
Hinge Torsion Bar

331612683
311431: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-33-203-9729
Angle Bracket

332039729
114351-77620: RNCC: 3 | RNVC: 2

28 Jan 2005

5340-33-201-3473
Sliding Block

332013473
14352603300: RNCC: 3 | RNVC: 2

28 Jun 2002

5340-33-106-8464
Rod End Clevis

331068464
5306000314: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-103-0077
Cushioning Pad

331030077
880301333: RNCC: 3 | RNVC: 2

13 Nov 1992

5340-33-200-5524
Detent Plunger

332005524
730210203: RNCC: 3 | RNVC: 2

4 Feb 2002

5340-33-108-2343
Catch Strike

331082343
0640.250.0516: RNCC: 3 | RNVC: 2
2510004961: RNCC: 5 | RNVC: 2
2510004961: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-004-2783
Mounting Bracket

330042783
210110111: RNCC: 3 | RNVC: 2

25 Nov 1998

5340-33-204-0805
Webbing Strap

332040805
00515009: RNCC: 3 | RNVC: 2

10 Mar 2005

5340-33-001-3985
Retaining Strap

330013985
92021004: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-145-5681
Rod End Clevis

331455681
70-120: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-000-6917
Loop Clamp

330006917
141456: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-106-5747
Mounting Bracket

331065747
1383107: RNCC: 3 | RNVC: 2
1383107: RNCC: 5 | RNVC: 2

31 Mar 1999

5340-33-108-4161
Access Cover

331084161
9644.810.0250: RNCC: 3 | RNVC: 2
1005004712: RNCC: 5 | RNVC: 2
1005004712: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-156-3268
Bumper

331563268
-55229-Y9501: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-4687
Mounting Bracket

332114687
VR03307020: RNCC: 3 | RNVC: 2
VR03307020: RNCC: 3 | RNVC: 2

15 Nov 2013

5340-33-202-3528
Mounting Bracket

332023528
W290609530500: RNCC: 3 | RNVC: 2

21 Apr 2003

5340-33-116-3210
Loop Clamp

331163210
3650.098: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-9888
Access Cover

332009888
2510900733: RNCC: 3 | RNVC: 2
2510900733: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-200-1382
Loop Clamp

332001382
990.102.017: RNCC: 3 | RNVC: 2

10 Oct 2001

5340-33-108-4272
Mounting Plate

331084272
9644.590.5500: RNCC: 3 | RNVC: 2
2510009338: RNCC: 5 | RNVC: 2
2510009338: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-106-5380
Furniture Cup

331065380
C0302151: RNCC: 3 | RNVC: 2
PCAMI/RP/29C0302151: RNCC: 4 | RNVC: 1
030215B: RNCC: 5 | RNVC: 1

13 Apr 1998

5340-33-200-8638
Mounting Plate

332008638
7562.252.0255: RNCC: 3 | RNVC: 2

5 Apr 2002

5340-33-209-4395
Utility Guard Rail Section

332094395
0662.10.3003.00: RNCC: 3 | RNVC: 2

20 Dec 2011

5340-33-107-8795
Mounting Plate

331078795
W290684404100: RNCC: 3 | RNVC: 2

24 Aug 2000

5340-33-205-4814
Mounting Bracket

332054814
220304000: RNCC: 3 | RNVC: 2

30 Oct 2006

5340-33-201-6951
Angle Bracket

332016951
319793: RNCC: 3 | RNVC: 2

3 Oct 2002

5340-33-157-7326
Access Cover

331577326
320861: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-108-2579
Mending Plate

331082579
9644.251.0155: RNCC: 3 | RNVC: 2
2510009946: RNCC: 5 | RNVC: 2
2510009946: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-107-7021
Bow Handle

331077021
7356.252.0183: RNCC: 3 | RNVC: 2
2510008914: RNCC: 5 | RNVC: 2

20 Jun 2000

5340-33-002-0871
Mounting Bracket

330020871
316705: RNCC: 3 | RNVC: 2

30 Oct 1992

5340-33-002-9692
Retaining Clip

330029692
6318310083: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-001-9095
Access Cover

330019095
TCH-3U-F2: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-108-2391
Mechanical Stop

331082391
9644.250.0377: RNCC: 3 | RNVC: 2
2510006550: RNCC: 5 | RNVC: 2
2510006550: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-204-8388
Mounting Bracket

332048388
291623-1: RNCC: 3 | RNVC: 2

14 Feb 2006

5340-33-160-6044
Mounting Bracket

331606044
75.522.533: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-181-2048
Retaining Clip

331812048
-01300309-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-154-4928
Mounting Bracket

331544928
190166: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-33-116-6265
Access Cover

331166265
15 H-19: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-9887
Mounting Plate

332009887
2510900339: RNCC: 3 | RNVC: 2
2510900339: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-001-4055
Elbow Catch

330014055
92021354: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-202-5509
Angle Bracket

332025509
W290684809000: RNCC: 3 | RNVC: 2

13 Aug 2003

5340-33-201-9612
Bridge Clamp

332019612
ABRACO2301R: RNCC: 3 | RNVC: 2

29 Nov 2002

5340-33-114-3964
Mounting Bracket

331143964
WW 202147: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-202-0594
Loop Clamp

332020594
1025-901368: RNCC: 3 | RNVC: 2

2 Jan 2003

5340-33-200-8603
Mounting Plate

332008603
7356.252.0466: RNCC: 3 | RNVC: 2
2510010084: RNCC: 5 | RNVC: 2

5 Apr 2002

5340-33-155-6280
Access Cover

331556280
900053: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-160-5788
Mechanical Stop

331605788
79.03.090.325: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-7313
Blank Panel

331577313
320348: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-157-8732
Blank Panel

331578732
815691: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-106-2063
Loop Clamp

331062063
-76814-G970X: RNCC: 3 | RNVC: 2

24 Oct 1997

5340-33-154-5544
Retaining Strap

331545544
671142: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-157-7400
Angle Bracket

331577400
512535: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-6220
Access Cover

331556220
819357: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-001-4164
Compression Cup

330014164
92023116: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-189-1866
Mounting Bracket

331891866
02340110: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-157-7152
Access Cover

331577152
313924: RNCC: 3 | RNVC: 2
313924: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-104-7750
Turnbuckle

331047750
6.3020.65.0.0034: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-2706
Access Cover

331082706
9644.251.0486: RNCC: 3 | RNVC: 2
2510901026: RNCC: 5 | RNVC: 2
2510901026: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-203-0023
Mounting Bracket

332030023
1025-900809: RNCC: 3 | RNVC: 2

5 Jan 2004

5340-33-203-9923
Mounting Plate

332039923
107 030 539 001: RNCC: 3 | RNVC: 2
H 16172: RNCC: 5 | RNVC: 2

31 Jan 2005

5340-33-201-0015
Mounting Bracket

332010015
2510901509: RNCC: 3 | RNVC: 2
2510901509: RNCC: 5 | RNVC: 2

22 Apr 2002

5340-33-200-1082
Access Cover

332001082
7063.252.0570: RNCC: 3 | RNVC: 2
2510701242: RNCC: 5 | RNVC: 2

8 Oct 2001

5340-33-107-2143
Access Cover

331072143
PCAMI/RP/0400000314: RNCC: 3 | RNVC: 2

8 Jul 1999

5340-33-126-2309
Access Cover

331262309
H11930/2/21/3: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-33-204-4181
Tee Hinge

332044181
W280698401104: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-181-8337
Mounting Plate

331818337
-11100258-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-155-9156
Mounting Bracket

331559156
311551: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-200-2603
Snap Hook

332002603
2.13.214: RNCC: 3 | RNVC: 2

20 Nov 2001

5340-33-209-4657
Utility Guard Rail Section

332094657
0663.40.8000.00: RNCC: 3 | RNVC: 2

27 Dec 2011

5340-33-001-0869
Mounting Bracket

330010869
35-46524-0002: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-200-1948
Retaining Band

332001948
J57166022-001: RNCC: 3 | RNVC: 2

31 Oct 2001

5340-33-144-6275
Access Cover

331446275
G 126075: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-161-4242
Mounting Bracket

331614242
118438: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-3925
Angle Bracket

332003925
CF 492 880 A: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-105-1420
Mechanical Stop

331051420
713175: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-202-9169
Mounting Bracket

332029169
1025-901859: RNCC: 3 | RNVC: 2

28 Nov 2003

5340-33-154-5554
Retaining Strap

331545554
782504: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-108-5350
Mounting Bracket

331085350
9644.250.2320: RNCC: 3 | RNVC: 2
2510008547: RNCC: 5 | RNVC: 2
2510008547: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-001-1038
Mounting Bracket

330011038
35-46723-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-108-4323
Mounting Plate

331084323
9644.591.5043: RNCC: 3 | RNVC: 2
2510011074: RNCC: 5 | RNVC: 2
2510011074: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-116-4006
Mounting Bracket

331164006
6143001: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-5379
Furniture Cup

331065379
C0302150: RNCC: 3 | RNVC: 2
PCAMI/RP/29C0302150: RNCC: 4 | RNVC: 1
030215: RNCC: 5 | RNVC: 1

13 Apr 1998

5340-33-115-9266
Retaining Strap

331159266
00.00557/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-181-8503
Access Cover

331818503
-11902299-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-126-3973
Access Cover

331263973
6.302.0.986.005.5: RNCC: 3 | RNVC: 2

18 Sep 1995

5340-33-204-1339
Mounting Bracket

332041339
PS-610277: RNCC: 3 | RNVC: 2

6 Apr 2005

5340-33-157-0136
Access Cover

331570136
-13264-H8501: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-158-8928
Loop Clamp

331588928
-1441238-X1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-7013
Loop Clamp

330007013
838807: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-001-4468
Retaining Strap

330014468
92026354: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-103-2874
Angle Bracket

331032874
615311: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-1790
Retaining Strap

331081790
7054.252.0068: RNCC: 3 | RNVC: 2
2910700011: RNCC: 5 | RNVC: 2

29 Jan 2001

5340-33-155-7766
Angle Bracket

331557766
630332: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-160-7476
Pipe Hanger

331607476
79.03.079.996: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-8849
Mounting Bracket

332018849
7057.292.0002: RNCC: 3 | RNVC: 2
2510700061: RNCC: 5 | RNVC: 2

11 Nov 2002

5340-33-202-1019
Mounting Bracket

332021019
11743427: RNCC: 3 | RNVC: 2

14 Jan 2003

5340-33-156-5036
Loop Clamp

331565036
-27691-F2000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-2143
Angle Bracket

331062143
930597: RNCC: 3 | RNVC: 2

27 Oct 1997

5340-33-155-6982
Expansion Plug

331556982
514378.61: RNCC: 3 | RNVC: 2
0001288088: RNCC: 5 | RNVC: 2

18 Oct 1990

5340-33-155-7489
Mending Plate

331557489
316909: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-106-9406
Mounting Plate

331069406
318199: RNCC: 3 | RNVC: 2

7 Apr 1999

5340-33-200-3892
Access Cover

332003892
CF 461 760 AE: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-001-4123
Access Cover

330014123
92022118: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-161-3711
Corner Brace

331613711
616556: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-155-7729
Angle Bracket

331557729
527882: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-115-9575
Mounting Plate

331159575
6.308.0.950.006.4: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-3753
Angle Bracket

332043753
NN60896P01: RNCC: 3 | RNVC: 2

18 Aug 2005

5340-33-000-6963
Loop Clamp

330006963
589149: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-108-4493
Mounting Bracket

331084493
9644.251.3220: RNCC: 3 | RNVC: 2
2540900541: RNCC: 5 | RNVC: 2
2540900541: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-001-5660
Retaining Strap

330015660
92041390: RNCC: 3 | RNVC: 2

15 Nov 1989

5340-33-203-1500
Access Cover

332031500
9673.250.5790: RNCC: 3 | RNVC: 2
2540900575: RNCC: 5 | RNVC: 2
2540900575: RNCC: 5 | RNVC: 2

6 Feb 2004

5340-33-108-2738
Access Cover

331082738
9644.251.1820: RNCC: 3 | RNVC: 2
2510901123: RNCC: 5 | RNVC: 2
2510901123: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-180-6917
Retaining Clip

331806917
240407: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-181-0286
Access Cover

331810286
-32111-J2000: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-116-1374
Mounting Plate

331161374
BA-11261100: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-145-5901
Mounting Plate

331455901
TAB. D9-34: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-0485
Mounting Bracket

330010485
35-46159-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-116-1369
Mounting Plate

331161369
AM-17164120: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-5675
Mending Plate

331545675
319361: RNCC: 3 | RNVC: 2
319361: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-005-2760
Access Hole Frame

330052760
756649: RNCC: 3 | RNVC: 2

2 Apr 2001

5340-33-106-9410
Mounting Plate

331069410
2510700331: RNCC: 3 | RNVC: 2

7 Apr 1999

5340-33-000-0659
Access Cover

330000659
6.302.0.787.031.5: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-125-7292
Access Cover

331257292
6.302.0.972.006.5: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-126-2301
Angle Bracket

331262301
H2L037: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-33-158-1307
Mechanical Stop

331581307
195030: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-33-001-1955
Mounting Bracket

330011955
35-66524-0201: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-156-3278
Self-Locking Insert

331563278
-55060-03C01: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-180-6771
Access Cover

331806771
217970: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-3838
Compression Cup

330013838
92020214: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-161-4920
Butt Hinge

331614920
312198: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-33-003-3237
Loop Clamp

330033237
221023240: RNCC: 3 | RNVC: 2

28 May 1997

5340-33-206-1957
Mounting Plate

332061957
CBD58505P44: RNCC: 3 | RNVC: 2

24 Sep 2007

5340-33-200-1217
Mounting Bracket

332001217
323882: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-160-6443
Mounting Bracket

331606443
75.510.422: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-7889
Angle Bracket

331577889
634260: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-9709
Mounting Plate

332009709
2510003215: RNCC: 3 | RNVC: 2
2510003215: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-161-5397
Angle Bracket

331615397
318711: RNCC: 3 | RNVC: 2
318711: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-8639
Angle Bracket

332008639
7562.252.0257: RNCC: 3 | RNVC: 2

5 Apr 2002

5340-33-002-1599
Access Cover

330021599
921.302.18: RNCC: 3 | RNVC: 2

1 Jul 1993

5340-33-201-6135
Loop Clamp

332016135
320598: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-33-187-4977
Strap Hinge

331874977
204446: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-207-9618
Utility Access Door

332079618
VR01061500: RNCC: 3 | RNVC: 2

11 Dec 2009

5340-33-189-1857
Mounting Bracket

331891857
02170010: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-155-1732
Mounting Bracket

331551732
22,68.01: RNCC: 3 | RNVC: 2

21 Jan 1991

5340-33-116-3259
Mounting Bracket

331163259
6426.067: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-3572
Access Cover

331163572
2690.043: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-7739
Angle Bracket

331557739
551875: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-115-6074
Plain Solid Disk

331156074
92290120113: RNCC: 3 | RNVC: 2

27 Apr 1995

5340-33-003-2483
Webbing Strap

330032483
221022110: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-33-002-9563
Door Closer

330029563
6317300116: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-203-9796
Mounting Plate

332039796
61315071: RNCC: 3 | RNVC: 2

31 Jan 2005

5340-33-200-1007
Metal Grille

332001007
SALR000136: RNCC: 3 | RNVC: 2

5 Oct 2001

5340-33-204-1652
Mending Plate

332041652
2540901572: RNCC: 3 | RNVC: 2

19 Apr 2005

5340-33-157-7119
Access Cover

331577119
312313: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-4313
Mounting Plate

332004313
7063.252.0098: RNCC: 3 | RNVC: 2
2540700104: RNCC: 5 | RNVC: 2

25 Jan 2002

5340-33-157-7944
Angle Bracket

331577944
645326: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-3216
Rod End Connector

332013216
165040: RNCC: 3 | RNVC: 2

24 Jun 2002

5340-33-102-1325
Key Blank

331021325
H-2-19: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-33-102-1857
Mounting Bracket

331021857
52530000291: RNCC: 3 | RNVC: 2
52530000291: RNCC: 3 | RNVC: 2
MCL-5-29: RNCC: 5 | RNVC: 2
MCL-5-29: RNCC: 5 | RNVC: 2

8 Nov 1990

5340-33-202-9967
Angle Bracket

332029967
MHC2120920: RNCC: 3 | RNVC: 2
MHC1120920: RNCC: 5 | RNVC: 2

19 Dec 2003

5340-33-116-2315
Mounting Bracket

331162315
411.529: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-4185
Access Cover

331074185
7060.252.0072: RNCC: 3 | RNVC: 2
2510700247: RNCC: 5 | RNVC: 2

15 Oct 1999

5340-33-004-9653
Rim Lock Set

330049653
2000292: RNCC: 3 | RNVC: 2

26 Apr 2000

5340-33-154-4810
Catch Strike

331544810
136466: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-33-103-1963
Mounting Bracket

331031963
1055-000369: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-9917
Mounting Plate

332029917
CS-EF2-AG1050108: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-204-4342
Mounting Bracket

332044342
AMIV370000: RNCC: 3 | RNVC: 2
500006435: RNCC: 5 | RNVC: 2

14 Sep 2005

5340-33-107-1255
Strap Fastener Loop

331071255
6101043: RNCC: 3 | RNVC: 2
PCAMI/RP/0306101043: RNCC: 6 | RNVC: 9

29 Jun 1999

5340-33-001-0520
Mounting Bracket

330010520
35-46198-0004: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-201-0211
Strapping

332010211
2930000559: RNCC: 3 | RNVC: 2
2930000559: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-004-3189
Mounting Bracket

330043189
SE023558708A: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-33-102-0481
Detent Plunger

331020481
2510-000106: RNCC: 3 | RNVC: 2
2510000106: RNCC: 5 | RNVC: 2
411.090.0465: RNCC: 5 | RNVC: 2

6 Aug 1992

5340-33-202-9057
Access Cover

332029057
223551760-01: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-001-2784
Loop Clamp

330012784
CAN67311-4: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-160-5661
Loop Clamp

331605661
79.03.083.095: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-6924
Angle Bracket

331546924
315899: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-205-9283
Angle Bracket

332059283
1025902026: RNCC: 3 | RNVC: 2
9743.100.9005: RNCC: 5 | RNVC: 2

21 May 2007

5340-33-001-5265
Angle Bracket

330015265
92032704: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-207-5081
Utility Access Door

332075081
227340851-01: RNCC: 3 | RNVC: 2

22 May 2009

5340-33-001-0053
Mounting Bracket

330010053
35-32345-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-204-6261
Mounting Plate

332046261
5034488: RNCC: 3 | RNVC: 2

8 Nov 2005

5340-33-201-4797
Mending Plate

332014797
J92666150-401: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-116-8312
Mechanical Stop

331168312
M4T403-01-14: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-102-5759
Mounting Bracket

331025759
702-G: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-1644
Rod End Clevis

331161644
4 200 331: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-6194
Access Cover

332026194
9673.100.0020: RNCC: 3 | RNVC: 2
1005900009: RNCC: 5 | RNVC: 2
1005900009: RNCC: 5 | RNVC: 2

12 Sep 2003

5340-33-116-3421
Retaining Strap

331163421
8545.031: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-2095
Mounting Bracket

332032095
2540901594: RNCC: 3 | RNVC: 2
2540901594: RNCC: 5 | RNVC: 2

16 Feb 2004

5340-33-001-0199
Mounting Bracket

330010199
35-43324-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-108-2328
Lock-Release Lever

331082328
0640.120.0160: RNCC: 3 | RNVC: 2
2510004584: RNCC: 5 | RNVC: 2
2510004584: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-005-1195
Mounting Bracket

330051195
MC51-2-13: RNCC: 3 | RNVC: 2

4 Aug 2000

5340-33-001-9997
Mounting Bracket

330019997
35-51234-0001: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-003-7143
Mounting Plate

330037143
4111931003: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-33-208-5471
Utility Guard Rail Section

332085471
EMB3-101-008-00: RNCC: 3 | RNVC: 2

21 Sep 2010

5340-33-107-6841
Leather Strap

331076841
20FCEP2COR: RNCC: 3 | RNVC: 2

17 Apr 2000

5340-33-154-1285
Access Cover

331541285
547653: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-156-5037
Loop Clamp

331565037
-20560-Y9500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-5083
Snap Hook

331075083
EQC-4628: RNCC: 3 | RNVC: 2

1 Dec 1999

5340-33-002-0889
Retaining Strap

330020889
313389: RNCC: 3 | RNVC: 2

30 Oct 1992

5340-33-203-8927
Mounting Bracket

332038927
2510700324: RNCC: 3 | RNVC: 2
7356.252.0921: RNCC: 5 | RNVC: 2

23 Dec 2004

5340-33-200-9781
Access Cover

332009781
2510008476: RNCC: 3 | RNVC: 2
2510008476: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-202-6615
Mounting Plate

332026615
9673.250.0264: RNCC: 3 | RNVC: 2
2510900830: RNCC: 5 | RNVC: 2
2510900830: RNCC: 5 | RNVC: 2

23 Sep 2003

5340-33-108-4270
Mounting Plate

331084270
9644.590.5510: RNCC: 3 | RNVC: 2
2510009333: RNCC: 5 | RNVC: 2
2510009333: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-001-0776
Mounting Bracket

330010776
35-46387-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-105-0566
Mounting Bracket

331050566
REM-50-2-9-1: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-104-0031
Access Cover

331040031
921796: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-33-205-9254
Mounting Bracket

332059254
620167: RNCC: 3 | RNVC: 2

18 May 2007

5340-33-181-7828
Mounting Plate

331817828
-07700587-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-000-2885
Access Cover

330002885
817774: RNCC: 1 | RNVC: 2
817774: RNCC: 3 | RNVC: 2

22 May 1987

5340-33-204-5984
Loop Clamp

332045984
2029182: RNCC: 3 | RNVC: 2

26 Oct 2005

5340-33-106-6015
Mounting Bracket

331066015
589579: RNCC: 3 | RNVC: 2

4 Sep 1998

5340-33-155-7696
Angle Bracket

331557696
805683: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-204-4143
Mounting Bracket

332044143
W290698403400: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-004-5233
Access Cover

330045233
772943: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-204-3870
Support Hook

332043870
PS-912032: RNCC: 3 | RNVC: 2
PS-911666: RNCC: 5 | RNVC: 2

31 Aug 2005

5340-33-105-7544
Access Cover

331057544
CMH95200-1/5-3: RNCC: 3 | RNVC: 2

1 Jun 1996

5340-33-161-7039
Padlock

331617039
330/50: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-205-4138
Mounting Bracket

332054138
W290620371100: RNCC: 3 | RNVC: 2

15 Sep 2006

5340-33-108-0682
Bow Handle

331080682
7053.252.0690: RNCC: 3 | RNVC: 2
2510700057: RNCC: 5 | RNVC: 2

5 Dec 2000

5340-33-106-5385
Furniture Glide

331065385
C0302190: RNCC: 3 | RNVC: 2
7053 05 100: RNCC: 3 | RNVC: 2
PCAMI/RP/29C0302190: RNCC: 4 | RNVC: 1

8 Apr 1998

5340-33-001-0722
Mounting Bracket

330010722
35-46354-0501: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-1536
Rod End Connector

330011536
35-56168-0501: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-004-3017
Webbing Strap

330043017
1005-006675: RNCC: 3 | RNVC: 2

29 Dec 1998

5340-33-154-0657
Access Cover

331540657
521185: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-116-7275
Mechanical Stop

331167275
108.113: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-103-9872
Retaining Strap

331039872
722011002: RNCC: 3 | RNVC: 2

3 Jan 1995

5340-33-157-7877
Access Cover

331577877
632608: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-7950
Mending Plate

331577950
645909: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-4960
Mounting Plate

331034960
9236 EI 43000 PM: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-4269
Mounting Plate

331084269
9644.250.5526: RNCC: 3 | RNVC: 2
2510009330: RNCC: 5 | RNVC: 2
2510009330: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-154-6532
Loop Clamp

331546532
321803: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-001-3383
Compression Cup

330013383
92014614: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-201-0259
Mounting Bracket

332010259
3465010356: RNCC: 3 | RNVC: 2
3465010356: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-105-1422
Access Cover

331051422
649266: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-115-8176
Access Cover

331158176
92290230125: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-005-0624
Angle Bracket

330050624
NN60448G01: RNCC: 3 | RNVC: 2

13 Jun 2000

5340-33-187-2272
Handle Grip

331872272
24,12.39: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-000-7490
Angle Bracket

330007490
637456: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-160-3821
Mounting Plate

331603821
95.587.447: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-3789
Retaining Strap

331603789
79.03.085.001: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-4269
Mounting Bracket

332044269
W280698446102: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-155-7707
Angle Bracket

331557707
643158: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-001-3956
Retaining Strap

330013956
92020602: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-108-4972
Lock-Release Lever

331084972
99.08.103: RNCC: 3 | RNVC: 2

26 Mar 2001

5340-33-001-4455
Lock-Release Lever

330014455
92026341: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-154-0658
Access Cover

331540658
525499: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-002-0469
Mounting Plate

330020469
40.40.07: RNCC: 3 | RNVC: 2

7 Aug 1992

5340-33-153-9685
Door Handle

331539685
801150: RNCC: 3 | RNVC: 2

4 Jan 1990

5340-33-206-1629
Mounting Bracket

332061629
4933900104: RNCC: 3 | RNVC: 2
9682.101.4500/704: RNCC: 5 | RNVC: 2

12 Sep 2007

5340-33-116-7961
Loop Clamp

331167961
01.00389/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-105-9625
Mending Plate

331059625
A29-04-07: RNCC: 3 | RNVC: 2

18 Sep 1996

5340-33-003-4318
Leather Strap

330034318
159-854: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-126-5765
Rod End Connector

331265765
G38212-R-0550: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-126-5758
Rod End Connector

331265758
G38212-E-0500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-4394
Mounting Bracket

330034394
SP-00352: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-200-2271
Mounting Plate

332002271
723571444-01: RNCC: 3 | RNVC: 2

15 Nov 2001

5340-33-200-9784
Access Cover

332009784
2510008486: RNCC: 3 | RNVC: 2
2510008486: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-106-4825
Mounting Plate

331064825
5.045.094.0 - MEISA: RNCC: 3 | RNVC: 2

6 Mar 1998

5340-33-004-8945
Block Clamp

330048945
NN58366P01: RNCC: 3 | RNVC: 2

28 Jan 2000

5340-33-206-0917
Door Holder

332060917
RE0006: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-33-206-1312
Mounting Plate

332061312
PCMSABMR077: RNCC: 3 | RNVC: 2

30 Aug 2007

5340-33-116-0633
Bridge Clamp

331160633
BA-11283000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-0694
Mounting Bracket

332060694
NN60979P01: RNCC: 3 | RNVC: 2

20 Jul 2007

5340-33-157-8023
Access Cover

331578023
697491: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-7314
Blank Panel

331577314
320351: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-8294
Bridge Clamp

331168294
22 514: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-001-9058
Access Cover

330019058
PT-64287: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-001-2065
Mounting Bracket

330012065
35-71124-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-200-1940
Retaining Band

332001940
J57166012-001: RNCC: 3 | RNVC: 2

31 Oct 2001

5340-33-154-8091
Loop Clamp

331548091
BN.2509: RNCC: 3 | RNVC: 2

11 Jun 1990

5340-33-154-7488
Butt Hinge

331547488
571233.01: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-203-9952
Mounting Bracket

332039952
999004781: RNCC: 3 | RNVC: 2
999004781: RNCC: 5 | RNVC: 2

31 Jan 2005

5340-33-107-3019
Access Cover

331073019
21124295000: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-156-4618
Door Handle

331564618
-80606-G2500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-6498
Loop Clamp

331546498
3090211511: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-201-5707
Access Cover

332015707
175082: RNCC: 3 | RNVC: 2

4 Sep 2002

5340-33-155-3094
Rim Lock

331553094
619404: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-33-156-4615
Bow Handle

331564615
-68401-C8200: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-2647
Angle Bracket

332002647
100351100002: RNCC: 3 | RNVC: 2

21 Nov 2001

Load More Results