What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 24 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 24 of 39

5340-33-155-7549
Mending Plate

331557549
593157: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-155-5750
Angle Bracket

331555750
761375: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-202-9328
Angle Bracket

332029328
CBD50517P02: RNCC: 3 | RNVC: 2

1 Dec 2003

5340-33-156-2342
Angle Bracket

331562342
-20625-G2500: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-108-4364
Access Cover

331084364
9644.251.6158: RNCC: 3 | RNVC: 2
2510900348: RNCC: 5 | RNVC: 2
2510900348: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-003-6020
Mending Plate

330036020
1055-001716: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-33-116-0933
Shimmy Damper

331160933
BC-11268010: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-5467
Stand Base

332045467
975840-10: RNCC: 3 | RNVC: 2

11 Oct 2005

5340-33-200-7373
Access Cover

332007373
9909505006: RNCC: 3 | RNVC: 2

6 Mar 2002

5340-33-161-4112
Access Cover

331614112
741646: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-154-0448
Expansion Plug

331540448
741642: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-211-4665
Mounting Bracket

332114665
VR12020000: RNCC: 3 | RNVC: 2
VR12020000: RNCC: 3 | RNVC: 2

15 Nov 2013

5340-33-107-4954
Rod End Connector

331074954
96.86.01.05: RNCC: 3 | RNVC: 2

29 Nov 1999

5340-33-157-7256
Angle Bracket

331577256
318399: RNCC: 3 | RNVC: 2
318399: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-4882
Access Cover

330014882
92027533: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-157-8380
Angle Bracket

331578380
751491: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-5063
Elbow Catch

332115063
0228408: RNCC: 3 | RNVC: 2

23 Nov 2013

5340-33-201-0004
Access Cover

332010004
2510901474: RNCC: 3 | RNVC: 2
2510901474: RNCC: 5 | RNVC: 2

22 Apr 2002

5340-33-004-2010
Access Cover

330042010
755488: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-001-1505
Mounting Bracket

330011505
35-56156-0004: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-005-2007
Retaining Strap

330052007
10-43134-0001: RNCC: 3 | RNVC: 2

12 Jan 2001

5340-33-161-3423
Access Cover

331613423
553069: RNCC: 3 | RNVC: 2

31 Jul 1995

5340-33-004-5171
Angle Bracket

330045171
747585: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-108-2721
Mending Plate

331082721
9644.251.0503: RNCC: 3 | RNVC: 2
2510901100: RNCC: 5 | RNVC: 2
2510901100: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-106-7482
Mounting Bracket

331067482
1005.002352: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-189-1804
Mounting Plate

331891804
02120000: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-203-2762
Access Cover

332032762
9673.250.5310: RNCC: 3 | RNVC: 2
2510900556: RNCC: 5 | RNVC: 2
2510900556: RNCC: 5 | RNVC: 2

19 Feb 2004

5340-33-160-4320
Mending Plate

331604320
95.606.342: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-3177
Access Cover

330043177
321 857 059: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-33-161-1359
Catch Strike

331611359
05.220.030.93: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-7388
Pawl Fastener

331067388
U01406: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-106-7348
Runner

331067348
AM81010400: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-181-1169
Retaining Strap

331811169
-93687-C7610: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-206-2023
Loop Clamp

332062023
08047-86CA0: RNCC: 3 | RNVC: 2

24 Sep 2007

5340-33-210-9436
Synchro Clamp

332109436
5315900275: RNCC: 3 | RNVC: 2
9743.100.0020: RNCC: 5 | RNVC: 2

10 Apr 2013

5340-33-106-8071
Mending Plate

331068071
W280475510102: RNCC: 3 | RNVC: 2

31 Mar 1999

5340-33-107-4526
Mounting Plate

331074526
W280687900002: RNCC: 3 | RNVC: 2

4 Nov 1999

5340-33-154-2237
Mending Plate

331542237
690410: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-116-1836
Ball Socket Seat

331161836
896 057: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-6157
Stand Base

331066157
-80570-D0100: RNCC: 3 | RNVC: 2

14 Sep 1998

5340-33-115-8138
Access Cover

331158138
92227001010: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-106-4914
Lock-Release Lever

331064914
-40250-G9500: RNCC: 3 | RNVC: 2

9 Mar 1998

5340-33-004-9696
Handwheel

330049696
2002905: RNCC: 3 | RNVC: 2

26 Apr 2000

5340-33-004-8404
Angle Bracket

330048404
NN60220P01: RNCC: 3 | RNVC: 2

13 Dec 1999

5340-33-001-3537
Angle Bracket

330013537
92016055: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-202-7114
Mounting Bracket

332027114
9673.250.1430: RNCC: 3 | RNVC: 2
2540901105: RNCC: 5 | RNVC: 2
2540901105: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-106-5601
Mounting Bracket

331065601
139899: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-33-108-5489
Mounting Plate

331085489
9644.250.5977: RNCC: 3 | RNVC: 2
2540001020: RNCC: 5 | RNVC: 2
2540001020: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-180-9168
Access Cover

331809168
346570K2: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-106-8855
Angle Bracket

331068855
7356.292.0990: RNCC: 3 | RNVC: 2
2510700309: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-000-0509
Access Cover

330000509
C4237/119: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-103-1591
Mounting Bracket

331031591
471-091-0702: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-2134
Loop Clamp

330012134
35-72100-0201: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-201-7983
Access Cover

332017983
2510003335: RNCC: 3 | RNVC: 2

25 Oct 2002

5340-33-157-8083
Access Cover

331578083
715631: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-4710
Retaining Clip

331064710
98405391: RNCC: 3 | RNVC: 2

6 Mar 1998

5340-33-154-6534
Loop Clamp

331546534
529904: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-160-6417
Mounting Bracket

331606417
5.482.510: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-8096
Retaining Strap

330018096
35-43130-0101: RNCC: 3 | RNVC: 2

18 Mar 1991

5340-33-000-6709
Retaining Strap

330006709
770734: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-200-9744
Runner

332009744
2510008324: RNCC: 3 | RNVC: 2
2510008324: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-201-9497
Mounting Bracket

332019497
J92563801-001: RNCC: 3 | RNVC: 2

20 Nov 2002

5340-33-161-5373
Access Cover

331615373
318110: RNCC: 3 | RNVC: 2
318110: RNCC: 3 | RNVC: 2

31 Jul 1995

5340-33-001-1519
Mounting Bracket

330011519
35-56159-0106: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-206-1510
Pipe Hanger

332061510
PS-610591: RNCC: 3 | RNVC: 2

5 Sep 2007

5340-33-201-8047
Mounting Bracket

332018047
320506: RNCC: 3 | RNVC: 2

25 Oct 2002

5340-33-116-7957
Loop Clamp

331167957
DSH-341: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-3167
Access Cover

331163167
2615.020: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-5092
Mounting Bracket

332005092
19543002: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-161-4087
Mending Plate

331614087
750617: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-33-107-1763
Loop Clamp

331071763
4730002330: RNCC: 3 | RNVC: 2
DIN 3016 D1 20 20X15 W1 2: RNCC: 4 | RNVC: 1

1 Jul 1999

5340-33-158-2243
Retaining Clip

331582243
0216535-5: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-3207
Loop Clamp

331163207
3616.018: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-5358
Pipe Hanger

332045358
35-46385-0005A01: RNCC: 3 | RNVC: 2

10 Oct 2005

5340-33-001-9134
Expansion Shield

330019134
C-20050-12-2-I-05-11: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-003-4036
Mounting Plate

330034036
11.20344-0509: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-154-7178
Bow Handle

331547178
174507.61: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-33-160-4518
Access Cover

331604518
95.636.290: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-4230
Mounting Bracket

331084230
0639.590.1015: RNCC: 3 | RNVC: 2
2510007594: RNCC: 5 | RNVC: 2
2510007594: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-200-6710
Mounting Bracket

332006710
OZC-04-101: RNCC: 3 | RNVC: 2

22 Feb 2002

5340-33-204-8942
Mounting Bracket

332048942
57512-13E00: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-204-6431
Mounting Bracket

332046431
R1 030: RNCC: 3 | RNVC: 2

18 Nov 2005

5340-33-181-7822
Mounting Plate

331817822
-07700474-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-116-2311
Mounting Bracket

331162311
A-220.400/7: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-1376
Mounting Plate

331161376
BL-13291000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-166-0432
Access Cover

331660432
BW-613: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-106-7965
Mending Plate

331067965
20855719: RNCC: 3 | RNVC: 2

31 Mar 1999

5340-33-157-0202
Access Cover

331570202
-74810-G9501: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-8257
Angle Bracket

331578257
744634: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-33-155-5742
Angle Bracket

331555742
755246: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-000-7489
Angle Bracket

330007489
637455: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-202-3039
Utility Access Door

332023039
6009990015: RNCC: 3 | RNVC: 2
27483305: RNCC: 5 | RNVC: 2

1 Apr 2003

5340-33-000-6934
Loop Clamp

330006934
525244: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-203-7184
Door Closer

332037184
5300707310: RNCC: 3 | RNVC: 2

10 Sep 2004

5340-33-200-1164
Access Cover

332001164
7053.252.0900: RNCC: 3 | RNVC: 2
2510700582: RNCC: 5 | RNVC: 2

8 Oct 2001

5340-33-157-7852
Blank Panel

331577852
630768: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-2760
Detent Plunger

330022760
1055-000812: RNCC: 3 | RNVC: 2

13 Jun 1994

5340-33-001-2787
Loop Clamp

330012787
CAN67311-8: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-004-2074
Access Cover

330042074
313057: RNCC: 3 | RNVC: 2
313057: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-106-9399
Webbing Strap

331069399
7356.252.0702: RNCC: 3 | RNVC: 2
2510011179: RNCC: 5 | RNVC: 2

7 Apr 1999

5340-33-204-1846
Mounting Plate

332041846
2540901508: RNCC: 3 | RNVC: 2
2540901508: RNCC: 5 | RNVC: 2

27 Apr 2005

5340-33-211-6080
Mounting Bracket

332116080
TOM0203202P08: RNCC: 3 | RNVC: 2
TOM0203202P08: RNCC: 3 | RNVC: 2

7 Dec 2013

5340-33-157-0150
Access Cover

331570150
-50814-G9600: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-9739
Access Cover

332049739
0602488: RNCC: 3 | RNVC: 2

6 Mar 2006

5340-33-155-1983
Turnbuckle

331551983
6160-1: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-106-4799
Mounting Bracket

331064799
3171110: RNCC: 3 | RNVC: 2
ALMCTI-1000003171110: RNCC: 5 | RNVC: 1

6 Mar 1998

5340-33-126-4203
Angle Bracket

331264203
C22136-N1000-C9: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-200-2772
Door Closer

332002772
100441010002: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-33-004-8952
Block Clamp

330048952
NN60173P01: RNCC: 3 | RNVC: 2

28 Jan 2000

5340-33-205-7553
Angle Bracket

332057553
980604: RNCC: 3 | RNVC: 2

8 Mar 2007

5340-33-108-0318
Mounting Plate

331080318
-26075-G9827: RNCC: 3 | RNVC: 2

23 Nov 2000

5340-33-004-5144
Mounting Bracket

330045144
9013220131: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-004-2047
Mounting Bracket

330042047
311716: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-204-7912
Mounting Plate

332047912
5037573: RNCC: 3 | RNVC: 2
1.124.93.033: RNCC: 5 | RNVC: 2

24 Jan 2006

5340-33-201-6955
Mounting Plate

332016955
323030: RNCC: 3 | RNVC: 2

3 Oct 2002

5340-33-204-6359
Bridge Clamp

332046359
0850583011100: RNCC: 3 | RNVC: 2

15 Nov 2005

5340-33-115-8145
Access Cover

331158145
10505000301: RNCC: 3 | RNVC: 2

27 Apr 1995

5340-33-200-4304
Angle Bracket

332004304
7063.252.0071: RNCC: 3 | RNVC: 2
2540700077: RNCC: 5 | RNVC: 2

25 Jan 2002

5340-33-180-8086
Angle Bracket

331808086
576723: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-000-6668
Retaining Strap

330006668
528125: RNCC: 1 | RNVC: 2

6 Sep 1988

5340-33-104-1694
Door Closer

331041694
571713: RNCC: 3 | RNVC: 2
571713.01: RNCC: 5 | RNVC: 2
15100435: RNCC: 5 | RNVC: 9

11 Apr 1995

5340-33-000-9999
Mending Plate

330009999
35-31278-0002: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-158-1616
Rod End Clevis

331581616
811002: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-8543
Angle Bracket

331578543
783516: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-33-108-2728
Mending Plate

331082728
9644.251.0502: RNCC: 3 | RNVC: 2
2510901107: RNCC: 5 | RNVC: 2
2510901107: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-157-7342
Access Cover

331577342
321594: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-157-8585
Blank Panel

331578585
801942: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-4103
Stand Base

332064103
STB XBA 3000: RNCC: 3 | RNVC: 2

27 Dec 2007

5340-33-202-7071
Retaining Strap

332027071
9673.290.5320: RNCC: 3 | RNVC: 2
2910900112: RNCC: 5 | RNVC: 2
2910900112: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-102-1129
Mending Plate

331021129
112262-W: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-33-000-7011
Loop Clamp

330007011
818214: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-102-5902
Retaining Strap

331025902
255-B: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-3661
Expansion Plug

331603661
GP-14622009: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-5048
Access Cover

330025048
212-13440-01-3: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-107-1918
Ball Socket Seat

331071918
192396: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-155-7485
Mending Plate

331557485
568643: RNCC: 3 | RNVC: 2
568643: RNCC: 5 | RNVC: 2

18 Oct 1990

5340-33-107-9588
Mounting Bracket

331079588
00.400.01.050: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-33-003-0752
Door Handle

330030752
01605183-0: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-004-5141
Mounting Bracket

330045141
10200528-0: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-203-2906
Swivel Caster

332032906
4-1302: RNCC: 3 | RNVC: 2

24 Feb 2004

5340-33-115-8179
Access Cover

331158179
10204001200: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-160-3955
Barrel Bolt

331603955
75.514.363: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-189-2359
Rim Lock

331892359
01310050: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-161-3037
Access Cover

331613037
503813: RNCC: 3 | RNVC: 2

13 Dec 1996

5340-33-207-3878
Utility Resilient Mount

332073878
135252: RNCC: 3 | RNVC: 2

25 Mar 2009

5340-33-206-1202
Utility Access Door

332061202
SEOD211020: RNCC: 3 | RNVC: 2

22 Aug 2007

5340-33-201-4822
Angle Bracket

332014822
NN60463P01: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-205-3580
Door Handle

332053580
1.120.34.05.004: RNCC: 3 | RNVC: 2

24 Aug 2006

5340-33-116-0537
Access Cover

331160537
BA-11272000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-8035
Access Cover

330018035
35-22846-0001-01: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-102-2934
Mounting Bracket

331022934
976-A-11: RNCC: 3 | RNVC: 2

11 Jan 1991

5340-33-209-6128
Utility Resilient Mount

332096128
HR 0 M8: RNCC: 3 | RNVC: 2

20 Jan 2012

5340-33-200-3884
Access Cover

332003884
CF 345 678 A: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-205-4012
Mounting Plate

332054012
5039781: RNCC: 3 | RNVC: 2
1.143.60.916: RNCC: 5 | RNVC: 2

14 Sep 2006

5340-33-116-0655
Loop Clamp

331160655
DF-13128080: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-3949
Pipe Hanger

330043949
35-46633-1305: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-33-145-5902
Mounting Plate

331455902
TAB. D9-38: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-1247
Bumper

331071247
610104002: RNCC: 3 | RNVC: 2
PCAMI/RP/0361010402: RNCC: 6 | RNVC: 9

29 Jun 1999

5340-33-201-2199
Access Cover

332012199
A2810571-001: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-181-0278
Access Cover

331810278
-90824-C6100: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-203-6117
Filler Opening Cap

332036117
4.321-051.0: RNCC: 3 | RNVC: 2
PCAMI/RP/1200004321051: RNCC: 5 | RNVC: 2

12 Jun 2004

5340-33-154-5678
Mending Plate

331545678
323404: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-106-9395
Retaining Strap

331069395
4730000526: RNCC: 3 | RNVC: 2

7 Apr 1999

5340-33-202-5592
Track Stop

332025592
35-81577-0501: RNCC: 3 | RNVC: 2

19 Aug 2003

5340-33-116-5534
Access Cover

331165534
19610-896-000H: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-2249
Mending Plate

331542249
766572: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-000-9629
Access Cover

330009629
35-11394-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-9075
Access Cover

330019075
117359-04: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-211-6068
Mounting Bracket

332116068
0918289000300: RNCC: 3 | RNVC: 2

7 Dec 2013

5340-33-004-5242
Access Cover

330045242
521276: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-108-4321
Mounting Plate

331084321
9644.591.5041: RNCC: 3 | RNVC: 2
2510011071: RNCC: 5 | RNVC: 2
2510011071: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-001-0644
Mounting Bracket

330010644
35-46286-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-205-9956
T Bracket

332059956
0840286001200: RNCC: 3 | RNVC: 2

14 Jun 2007

5340-33-208-8513
Utility Resilient Mount

332088513
123279: RNCC: 3 | RNVC: 2
40000314: RNCC: 5 | RNVC: 2

28 Mar 2011

5340-33-106-7088
Access Cover

331067088
144155: RNCC: 3 | RNVC: 2

29 Jan 1999

5340-33-115-8856
Mounting Bracket

331158856
16581-ZE2-810: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-1236
Mounting Bracket

330011236
35-49935-0002: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-126-0637
Loop Clamp

331260637
6330-56: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-33-200-6906
Sliding Block

332006906
17516137: RNCC: 3 | RNVC: 2

25 Feb 2002

5340-33-106-9972
Rim Lock Set

331069972
PCAMI/RP/0700000852: RNCC: 3 | RNVC: 2

25 May 1999

5340-33-004-5185
Retaining Strap

330045185
AC-84247000: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-201-2175
Utility Access Door

332012175
A2810425-001: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-104-8225
Mounting Plate

331048225
1790500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-7509
Angle Bracket

330007509
806377: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-004-5227
Access Cover

330045227
228336: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-003-2465
Webbing Strap

330032465
221023725: RNCC: 3 | RNVC: 2

13 Feb 1997

5340-33-102-4013
Leather Strap

331024013
52320000440: RNCC: 3 | RNVC: 2
MB51-3-44: RNCC: 3 | RNVC: 2
52320000440: RNCC: 3 | RNVC: 2
MB51-3-44: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-0092
Mounting Bracket

331070092
130-471: RNCC: 3 | RNVC: 2
PCAMI/RP/0700000511: RNCC: 6 | RNVC: 9

25 May 1999

5340-33-001-5002
Compression Cup

330015002
92027670: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-106-8650
Mounting Plate

331068650
191187: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-154-4935
Mounting Bracket

331544935
597133: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-204-1404
Mounting Bracket

332041404
M2.00010: RNCC: 3 | RNVC: 2

11 Apr 2005

5340-33-181-3265
Rod End Clevis

331813265
-09100657-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-181-8258
Mounting Plate

331818258
-10100506-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-145-5456
Angle Bracket

331455456
85-436: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-160-6491
Hook Handle

331606491
75.491.960: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-160-4359
Mending Plate

331604359
79.03.069.016: RNCC: 3 | RNVC: 2

27 Nov 1995

5340-33-157-7757
Mending Plate

331577757
590324: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-5223
Access Cover

330045223
9045-063: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-116-8264
Mending Plate

331168264
M4T403-01-09: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-4638
Turnbuckle

330034638
1055-001538: RNCC: 3 | RNVC: 2

22 Oct 1997

5340-33-000-6932
Loop Clamp

330006932
523601: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-108-2568
Elbow Catch

331082568
9644.251.0840: RNCC: 3 | RNVC: 2
2510009786: RNCC: 5 | RNVC: 2
2510009786: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-155-8967
Angle Bracket

331558967
312517: RNCC: 3 | RNVC: 2
312517: RNCC: 5 | RNVC: 9

4 Jan 1991

5340-33-107-0105
Mounting Bracket

331070105
6524.03: RNCC: 3 | RNVC: 2

25 May 1999

5340-33-108-5818
Mounting Plate

331085818
2910000120: RNCC: 3 | RNVC: 2

23 Apr 2001

5340-33-202-7084
Retaining Strap

332027084
9673.250.7100: RNCC: 3 | RNVC: 2
2540900912: RNCC: 5 | RNVC: 2
2540900912: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-201-9710
Mounting Bracket

332019710
214110801: RNCC: 3 | RNVC: 2
214110801: RNCC: 5 | RNVC: 2

29 Nov 2002

5340-33-108-1249
Mounting Bracket

331081249
-82610-Y9502: RNCC: 3 | RNVC: 2

28 Dec 2000

5340-33-001-3989
Shelf Bracket

330013989
92021008: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-209-3059
Mounting Bracket

332093059
606ME130001: RNCC: 3 | RNVC: 2

27 Sep 2011

5340-33-145-5265
Access Cover

331455265
03-263: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-210-8719
Bow Handle

332108719
PCAMI/AC/ACTO42A/12/10: RNCC: 3 | RNVC: 2
USP-HK-10: RNCC: 5 | RNVC: 2

17 Mar 2013

5340-33-157-0146
Access Cover

331570146
-86851-G970X: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-0681
Access Cover

332010681
4312-711-3459-1: RNCC: 3 | RNVC: 2

24 Apr 2002

5340-33-108-4163
Access Cover

331084163
9644.810.0260: RNCC: 3 | RNVC: 2
1005005638: RNCC: 5 | RNVC: 2
1005005638: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-106-2144
Angle Bracket

331062144
579015: RNCC: 3 | RNVC: 2

27 Oct 1997

5340-33-189-2044
Elastic Strap

331892044
01100100: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-203-0299
Mounting Bracket

332030299
200132405: RNCC: 3 | RNVC: 2
200132405: RNCC: 5 | RNVC: 2

19 Jan 2004

5340-33-116-1835
Ball Socket Seat

331161835
896 043: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-4351
Metal Grille

331064351
PER-225: RNCC: 3 | RNVC: 2
PCAMI/1400001300135: RNCC: 5 | RNVC: 2

12 Jan 1998

5340-33-145-6017
Mounting Bracket

331456017
TAB. C11-10: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-4225
Mounting Plate

332014225
A2810429-002: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-33-145-6440
Loop Clamp

331456440
TAB. C6-14: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-1835
Mounting Plate

331081835
7054.292.0011: RNCC: 3 | RNVC: 2
2930700045: RNCC: 5 | RNVC: 2

29 Jan 2001

5340-33-209-5846
Utility Resilient Mount

332095846
0738053360: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-33-205-6554
Mounting Bracket

332056554
1025901920: RNCC: 3 | RNVC: 2
9743.100.0108: RNCC: 5 | RNVC: 2

5 Feb 2007

5340-33-157-7558
Mending Plate

331577558
548785: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-102-4024
Detent Plunger

331024024
42120010050: RNCC: 3 | RNVC: 2
VB-100-A-0500: RNCC: 3 | RNVC: 2
42120010050: RNCC: 3 | RNVC: 2
VB-100-A-0500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-9616
Clamping Catch

330029616
6317500984: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-203-2889
Access Cover

332032889
9673.250.5350: RNCC: 3 | RNVC: 2
2510900560: RNCC: 5 | RNVC: 2
2510900560: RNCC: 5 | RNVC: 2

23 Feb 2004

5340-33-004-7796
Mounting Plate

330047796
-0941042: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-33-157-8265
Angle Bracket

331578265
745790: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-3839
Angle Bracket

331613839
630923: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-154-5688
Mending Plate

331545688
752638: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-153-9676
Door Handle

331539676
619430: RNCC: 3 | RNVC: 2
15100268: RNCC: 5 | RNVC: 9

4 Jan 1990

5340-33-108-7448
Mounting Plate

331087448
W290683811100: RNCC: 3 | RNVC: 2

23 Jul 2001

5340-33-161-3509
Access Cover

331613509
566080: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-116-8284
Access Cover

331168284
22 548: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-107-3072
Access Cover

331073072
21124803500: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-115-6071
Plain Solid Disk

331156071
92274520042: RNCC: 3 | RNVC: 2

27 Apr 1995

5340-33-002-9791
Retaining Clip

330029791
1406462: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-001-1616
Bumper

330011616
35-61021-0201: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-002-1845
Angle Bracket

330021845
700513: RNCC: 3 | RNVC: 2
5340000635: RNCC: 5 | RNVC: 2
5340-000635: RNCC: 5 | RNVC: 2
OL-700513: RNCC: 5 | RNVC: 2

13 Jul 1993

5340-33-190-3890
Loop Clamp

331903890
2273: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-209-6127
Utility Resilient Mount

332096127
HR 0-N M8: RNCC: 3 | RNVC: 2

20 Jan 2012

5340-33-161-5312
Mortise Latch

331615312
314148: RNCC: 3 | RNVC: 2

25 Jul 1995

5340-33-200-9043
Mounting Bracket

332009043
3465700090: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-33-200-6684
Mounting Bracket

332006684
319349: RNCC: 3 | RNVC: 2

22 Feb 2002

5340-33-108-0607
Bumper

331080607
7356.591.0018: RNCC: 3 | RNVC: 2
5340700010: RNCC: 5 | RNVC: 2

4 Dec 2000

5340-33-200-9756
Mounting Bracket

332009756
2510008346: RNCC: 3 | RNVC: 2
2510008346: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-107-1868
Access Door Hinge

331071868
7702146955: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-005-0584
Angle Bracket

330050584
NN50074P01: RNCC: 3 | RNVC: 2

13 Jun 2000

5340-33-205-5655
Mounting Bracket

332055655
CBD57501P14: RNCC: 3 | RNVC: 2

19 Dec 2006

5340-33-005-3881
Lock-Release Lever

330053881
3PP4083-6054P1: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-33-201-4071
Angle Bracket

332014071
A2810564-001: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-203-1493
Access Cover

332031493
9673.250.5950: RNCC: 3 | RNVC: 2
2540900573: RNCC: 5 | RNVC: 2
2540900573: RNCC: 5 | RNVC: 2

6 Feb 2004

5340-33-188-9701
Bumper

331889701
3 033 335: RNCC: 3 | RNVC: 2

25 Sep 1995

5340-33-200-5049
Access Cover

332005049
19523202: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-200-9688
Lock-Release Lever

332009688
1005006240: RNCC: 3 | RNVC: 2
1005006240: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-003-6778
Mounting Bracket

330036778
312689: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-202-6697
Utility Access Door

332026697
9673.250.0270: RNCC: 3 | RNVC: 2
2510900171: RNCC: 5 | RNVC: 2
2510900171: RNCC: 5 | RNVC: 2

24 Sep 2003

5340-33-003-4135
Retaining Strap

330034135
11.44086-0572: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-204-8102
Rod End Clevis

332048102
5007718: RNCC: 3 | RNVC: 2
E-10.21.27: RNCC: 5 | RNVC: 2

1 Feb 2006

5340-33-107-8779
Mounting Bracket

331078779
50.41.029.A: RNCC: 3 | RNVC: 2

24 Aug 2000

5340-33-001-0603
Mounting Bracket

330010603
35-46263-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-157-0224
Access Cover

331570224
-33171-G9501: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-190-3507
Access Cover

331903507
3-88300: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-154-6923
Angle Bracket

331546923
315356: RNCC: 3 | RNVC: 2
315356: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-201-7189
Access Cover

332017189
1025-900298: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-33-004-3930
Angle Bracket

330043930
212-62102-06-1: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-33-001-2090
Mounting Bracket

330012090
35-71201-0101: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-0662
Mounting Bracket

330010662
35-46297-0303: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-208-3140
Utility Resilient Mount

332083140
CA96400-0001: RNCC: 3 | RNVC: 2

7 Apr 2010

5340-33-107-3067
Mounting Bracket

331073067
21124699000: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-154-8043
Retaining Clip

331548043
00 149 363.00: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-156-2351
Angle Bracket

331562351
-28036-04C01: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-107-1371
Doorknob

331071371
6123082: RNCC: 3 | RNVC: 2
PCAMI/RP/0306123082: RNCC: 6 | RNVC: 9

30 Jun 1999

5340-33-188-9548
Access Cover

331889548
3 031 781: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-1886
Loop Clamp

330001886
3090111011: RNCC: 1 | RNVC: 2
3090111011: RNCC: 3 | RNVC: 2

10 Dec 1986

5340-33-161-2692
Mounting Bracket

331612692
318515: RNCC: 3 | RNVC: 2

27 Apr 1995

5340-33-156-5011
Loop Clamp

331565011
-27087-G2500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-5366
Loop Clamp

332045366
35-43127-0001A01: RNCC: 3 | RNVC: 2

10 Oct 2005

5340-33-188-8317
Eye Hook

331888317
6132004: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-145-5636
Engine Plate

331455636
03-271: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-1784
Angle Bracket

332051784
MAM-I-03-00-06: RNCC: 3 | RNVC: 2

31 May 2006

5340-33-153-9670
Door Handle

331539670
507050: RNCC: 3 | RNVC: 2

4 Jan 1990

5340-33-200-8515
Access Cover

332008515
0639.250.9123: RNCC: 3 | RNVC: 2
2530000778: RNCC: 5 | RNVC: 2
2530000778: RNCC: 5 | RNVC: 2

5 Apr 2002

5340-33-104-9112
Retaining Strap

331049112
-74500101-1: RNCC: 3 | RNVC: 2

12 Sep 1995

5340-33-102-2938
Mounting Bracket

331022938
G976-C-2: RNCC: 3 | RNVC: 2

11 Jan 1991

5340-33-116-8493
Corner Brace

331168493
5156/23: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-1441
Angle Bracket

332011441
SP05890: RNCC: 3 | RNVC: 2

16 May 2002

5340-33-201-4768
Access Cover

332014768
J52464011-004: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-000-0515
Access Cover

330000515
H350GS/D028: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-188-7518
Loop Clamp

331887518
9.325.1.977.002.4: RNCC: 3 | RNVC: 2

21 Sep 1995

5340-33-201-9513
Bow Handle

332019513
223551393-01: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-33-108-5329
Mounting Plate

331085329
9644.590.0013: RNCC: 3 | RNVC: 2
2510007475: RNCC: 5 | RNVC: 2
2510007475: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-201-3544
Butt Hinge

332013544
92492914045: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-33-201-4770
Access Cover

332014770
J52464020-402: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-002-5199
Threaded Rod End

330025199
212-51116-02-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-202-6784
Mending Plate

332026784
9644.250.5883: RNCC: 3 | RNVC: 2
2540001029: RNCC: 5 | RNVC: 2
2540001029: RNCC: 5 | RNVC: 2

25 Sep 2003

5340-33-201-8189
Mounting Plate

332018189
2510900070: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-106-9397
Retaining Strap

331069397
4730000528: RNCC: 3 | RNVC: 2

7 Apr 1999

5340-33-205-5859
Access Cover

332055859
5030605: RNCC: 3 | RNVC: 2
1.108.72.077-A: RNCC: 5 | RNVC: 2

27 Dec 2006

5340-33-004-5167
Mounting Bracket

330045167
75221243/4: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-116-5532
Access Cover

331165532
12361-896-000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-4499
Retaining Strap

332004499
WW 435 980: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-000-6959
Loop Clamp

330006959
582812: RNCC: 1 | RNVC: 2
4004918: RNCC: 3 | RNVC: 2
582812: RNCC: 5 | RNVC: 2

9 Sep 1988

5340-33-107-0842
Rim Lock

331070842
7702112922: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-211-3002
Mounting Plate

332113002
5061553: RNCC: 3 | RNVC: 2
1.164.91.014: RNCC: 5 | RNVC: 2

13 Aug 2013

5340-33-107-6160
Butt Hinge

331076160
230089: RNCC: 3 | RNVC: 2

17 Mar 2000

5340-33-001-8154
Access Cover

330018154
35-13328-0301: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-001-1266
Angle Bracket

330011266
35-51073-0301: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-200-3010
Pipe Hanger

332003010
35-46388-0005A01: RNCC: 3 | RNVC: 2

10 Dec 2001

5340-33-001-0830
Mounting Bracket

330010830
35-46444-0102: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-204-4830
Mounting Plate

332044830
PS-910476: RNCC: 3 | RNVC: 2

21 Sep 2005

5340-33-200-8651
Corner Brace

332008651
7562.252.0264: RNCC: 3 | RNVC: 2

5 Apr 2002

5340-33-202-6921
Mounting Bracket

332026921
9673.250.5370: RNCC: 3 | RNVC: 2
2510900633: RNCC: 5 | RNVC: 2
2510900633: RNCC: 5 | RNVC: 2

26 Sep 2003

5340-33-203-6989
Access Cover

332036989
204200109: RNCC: 3 | RNVC: 2
204200109: RNCC: 5 | RNVC: 2

9 Sep 2004

5340-33-154-8073
Access Cover

331548073
V-31076: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-001-0311
Loop Clamp

330010311
35-43511-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-200-0088
Mounting Plate

332000088
7053.252.0103: RNCC: 3 | RNVC: 2
2510700036: RNCC: 5 | RNVC: 2

24 Sep 2001

5340-33-107-3018
Access Cover

331073018
21124290000: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-161-7018
Padlock

331617018
401/50: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-161-7024
Padlock

331617024
300/50: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-160-4341
Mending Plate

331604341
95.602.920: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-1649
Angle Bracket

330011649
35-61156-0101: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-189-2275
Mounting Bracket

331892275
01080010: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-004-3201
Mounting Bracket

330043201
406 254 07 10: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-33-204-5061
Mounting Plate

332045061
76D06092-2MAS: RNCC: 3 | RNVC: 2

30 Sep 2005

5340-33-154-9635
Door Handle

331549635
90207023: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-004-7751
Mounting Bracket

330047751
-07105119-0: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-33-157-0154
Access Cover

331570154
-07201079-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-4088
Mounting Bracket

331074088
620150-1: RNCC: 3 | RNVC: 2

15 Oct 1999

5340-33-000-1888
Loop Clamp

330001888
3090214049: RNCC: 1 | RNVC: 2
4730001091: RNCC: 3 | RNVC: 2
3090214049: RNCC: 3 | RNVC: 2

10 Dec 1986

5340-33-211-5279
Block Clamp

332115279
320/20PA: RNCC: 3 | RNVC: 2
0016280: RNCC: 5 | RNVC: 2

24 Nov 2013

5340-33-202-6681
Mounting Bracket

332026681
9673.100.0170: RNCC: 3 | RNVC: 2
1005900384: RNCC: 5 | RNVC: 2
1005900384: RNCC: 5 | RNVC: 2

24 Sep 2003

5340-33-203-2718
Mounting Bracket

332032718
9673.250.7770: RNCC: 3 | RNVC: 2
2540901112: RNCC: 5 | RNVC: 2
2540901112: RNCC: 5 | RNVC: 2

19 Feb 2004

5340-33-161-5377
Angle Bracket

331615377
318221: RNCC: 3 | RNVC: 2
318221: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-3382
Locking Stay

332033382
4172-885: RNCC: 3 | RNVC: 2

3 Mar 2004

5340-33-108-5352
Mounting Bracket

331085352
9644.250.2110: RNCC: 3 | RNVC: 2
2510008617: RNCC: 5 | RNVC: 2
2510008617: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-107-5914
Mounting Bracket

331075914
116,5076.04.00: RNCC: 3 | RNVC: 2

27 Jan 2000

5340-33-157-8621
Angle Bracket

331578621
806663: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-201-2430
Strap Fastener Loop

332012430
120-0934-04: RNCC: 3 | RNVC: 2

11 Jun 2002

5340-33-001-0829
Mounting Bracket

330010829
35-46444-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-156-5018
Loop Clamp

331565018
-22441-50A60: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-5518
Retaining Strap

331545518
319478: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-202-6722
Angle Bracket

332026722
5034185: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-33-158-2244
Retaining Clip

331582244
0216536-3: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-2211
Synchro Clamp

332062211
PCMSABMR089: RNCC: 3 | RNVC: 2

3 Oct 2007

5340-33-107-1375
Access Cover

331071375
6124030: RNCC: 3 | RNVC: 2
PCAMI/RP/0306124030: RNCC: 6 | RNVC: 9

30 Jun 1999

5340-33-125-7288
Access Cover

331257288
6.0215.21.5.0030: RNCC: 3 | RNVC: 2

14 Sep 1995

5340-33-000-0423
Screw Hook

330000423
H350GS/D118/3: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-200-1233
Access Cover

332001233
324150: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-190-3650
Support Hook

331903650
5-270026: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-107-3720
Retaining Clip

331073720
631 988 01 78: RNCC: 3 | RNVC: 2

4 Oct 1999

5340-33-107-4606
Retaining Strap

331074606
5970000515: RNCC: 3 | RNVC: 2

15 Nov 1999

5340-33-103-2269
Mounting Bracket

331032269
1055-000170: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-1737
Retaining Clip

331031737
471-091-0016: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-4420
Angle Bracket

332064420
10-67011-0201: RNCC: 3 | RNVC: 2

16 Jan 2008

5340-33-000-6658
Retaining Strap

330006658
117100: RNCC: 1 | RNVC: 2

6 Sep 1988

5340-33-180-5613
Strap Hinge

331805613
155148: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-205-8801
Protection Bellows

332058801
171498201A: RNCC: 3 | RNVC: 2

30 Apr 2007

5340-33-210-9872
Mounting Bracket

332109872
BL 1036 SIM: RNCC: 3 | RNVC: 2

29 Apr 2013

5340-33-157-5439
Angle Bracket

331575439
615482: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-8808
Angle Bracket

331078808
W280683148004: RNCC: 3 | RNVC: 2

24 Aug 2000

5340-33-189-2278
Mounting Bracket

331892278
01220062: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-7306
Loop Clamp

332017306
EN4114F36NH1: RNCC: 2 | RNVC: 2

15 Oct 2002

5340-33-107-6726
Loop Clamp

331076726
3090234649: RNCC: 3 | RNVC: 2

17 Apr 2000

5340-33-155-8469
Loop Clamp

331558469
0019975490: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-33-204-1407
Mounting Bracket

332041407
M2.00015: RNCC: 3 | RNVC: 2

11 Apr 2005

5340-33-001-4846
Retaining Strap

330014846
92027410: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-106-5242
Mounting Bracket

331065242
631 766 00 69: RNCC: 3 | RNVC: 2

3 Apr 1998

5340-33-102-3764
Access Cover

331023764
MD51-6-7: RNCC: 3 | RNVC: 2
MD51-6-7: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-8010
Angle Bracket

331578010
691886: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-116-0336
Mending Plate

331160336
BH-17164000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-8935
Mounting Bracket

332048935
51410-29F20: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-206-0612
Mounting Bracket

332060612
PCMSABMR057: RNCC: 3 | RNVC: 2

17 Jul 2007

5340-33-108-6062
Bumper

331086062
199001006R: RNCC: 3 | RNVC: 2

30 Apr 2001

5340-33-204-9962
Corner Brace

332049962
5007212: RNCC: 3 | RNVC: 2

29 Mar 2006

5340-33-204-4707
Mounting Plate

332044707
0850580001100: RNCC: 3 | RNVC: 2

20 Sep 2005

5340-33-114-5020
Eye Hook

331145020
5TG 2-132: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-201-8090
Angle Bracket

332018090
7055.252.0066: RNCC: 3 | RNVC: 2
2510701565: RNCC: 5 | RNVC: 2

25 Oct 2002

5340-33-107-2488
Mounting Bracket

331072488
20315998: RNCC: 3 | RNVC: 2

24 Sep 1999

5340-33-157-8264
Angle Bracket

331578264
745481: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3218
Retaining Strap

330013218
92011009: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-157-7402
Angle Bracket

331577402
513020: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-5140
Access Cover

331065140
021.05.32: RNCC: 3 | RNVC: 2

23 Mar 1998

5340-33-205-0997
Swivel Caster

332050997
1116: RNCC: 3 | RNVC: 2

27 Apr 2006

5340-33-116-0660
Loop Clamp

331160660
BD-13142000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-4452
Mounting Bracket

331034452
174218: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-5002
Mounting Plate

332055002
SP06768: RNCC: 3 | RNVC: 2

22 Nov 2006

5340-33-000-6958
Loop Clamp

330006958
582002: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-106-8654
Mounting Plate

331068654
2510010520: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-202-7063
Utility Access Door

332027063
9673.290.5130: RNCC: 3 | RNVC: 2
2910900060: RNCC: 5 | RNVC: 2
2910900060: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-205-2961
Loop Clamp

332052961
16491-29F11: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-33-206-4599
Roller Holder

332064599
H081 2151: RNCC: 3 | RNVC: 2

22 Jan 2008

5340-33-107-3071
Access Cover

331073071
21124802500: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-204-4892
Lock-Release Lever

332044892
730092162: RNCC: 3 | RNVC: 2

22 Sep 2005

5340-33-205-4416
Bridge Clamp

332054416
5040023: RNCC: 3 | RNVC: 2
1.143.31.056: RNCC: 5 | RNVC: 2

29 Sep 2006

5340-33-001-1504
Mounting Bracket

330011504
35-56156-0003: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-1192
Mounting Bracket

330011192
35-49132-0202: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-157-0119
Access Cover

331570119
-68240-Y9501: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-5046
Access Cover

330025046
212-13204-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-102-1650
Mounting Bracket

331021650
MBCE-4-23: RNCC: 3 | RNVC: 2
MBCE-4-23: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-102-1513
Handle Grip

331021513
B-3-29M: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-154-0200
Bow Handle

331540200
682276: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-107-4203
Mounting Plate

331074203
7057.412.0001: RNCC: 3 | RNVC: 2
2510700155: RNCC: 5 | RNVC: 2

15 Oct 1999

5340-33-116-5229
Threaded Rod End

331165229
3034405: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-8286
Access Cover

331168286
22 543: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-202-7060
Mounting Bracket

332027060
9673.290.5070: RNCC: 3 | RNVC: 2
2910900025: RNCC: 5 | RNVC: 2
2910900025: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-107-4295
Mounting Bracket

331074295
W290683148000: RNCC: 3 | RNVC: 2

14 Oct 1999

5340-33-201-4369
Mounting Plate

332014369
223581104-01: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-33-201-9548
Access Cover

332019548
223591750-01: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-33-201-0142
Mounting Plate

332010142
2540900531: RNCC: 3 | RNVC: 2
2540900531: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-189-2281
Mounting Bracket

331892281
0240010: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-0347
Rod End Clevis

332010347
5305900052: RNCC: 3 | RNVC: 2
5305900052: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-204-2884
Snap Hook

332042884
YF0KP31BM0000: RNCC: 3 | RNVC: 2

10 Jun 2005

5340-33-116-6391
Loop Clamp

331166391
52X57: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-0339
Mending Plate

331160339
BM-12281120: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-5876
Bumper

331075876
5TG4-138E: RNCC: 3 | RNVC: 2
51.14.029: RNCC: 5 | RNVC: 2

3 May 2000

5340-33-201-7776
Stand Base

332017776
D0941411210: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-33-205-4028
Mounting Plate

332054028
5040309: RNCC: 3 | RNVC: 2
1.143.92.005: RNCC: 5 | RNVC: 2

14 Sep 2006

5340-33-203-4984
Angle Bracket

332034984
NN60906P01: RNCC: 3 | RNVC: 2

30 Apr 2004

5340-33-005-0896
Bumper

330050896
8163442: RNCC: 3 | RNVC: 2

20 Jun 2000

5340-33-001-0827
Mounting Bracket

330010827
35-46444-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-106-3029
Rigid Caster

331063029
112.5001.16.00: RNCC: 3 | RNVC: 2
192529: RNCC: 5 | RNVC: 2

4 Sep 1997

5340-33-108-4955
Bumper

331084955
99.08.67: RNCC: 3 | RNVC: 2

26 Mar 2001

5340-33-201-9521
Mounting Plate

332019521
223591702-01: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-33-201-9849
Mounting Plate

332019849
223591741-01: RNCC: 3 | RNVC: 2

5 Dec 2002

5340-33-202-9049
Mounting Plate

332029049
223551746-01: RNCC: 3 | RNVC: 2
223551746: RNCC: 5 | RNVC: 1

27 Nov 2003

5340-33-154-9818
Mounting Bracket

331549818
22156.00.6: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-201-7167
Access Cover

332017167
1025-900182: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-33-161-3048
Turnbuckle

331613048
3230801412: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-8504
Access Cover

332008504
0639.250.9125: RNCC: 3 | RNVC: 2
2530000642: RNCC: 5 | RNVC: 2
2530000642: RNCC: 5 | RNVC: 2

5 Apr 2002

5340-33-107-8810
Mounting Plate

331078810
W280689100011: RNCC: 3 | RNVC: 2

24 Aug 2000

5340-33-001-3664
Retaining Strap

330013664
92019103: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-202-5168
Mounting Plate

332025168
222421715-01: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-33-154-5674
Mending Plate

331545674
319359: RNCC: 3 | RNVC: 2
319359: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-205-5883
Mounting Plate

332055883
7003042: RNCC: 3 | RNVC: 2
1.108.71.017: RNCC: 5 | RNVC: 2

28 Dec 2006

5340-33-202-5485
Mounting Plate

332025485
W280685340004: RNCC: 3 | RNVC: 2

13 Aug 2003

5340-33-108-2133
Mounting Bracket

331082133
9644.100.0064: RNCC: 3 | RNVC: 2
1005005215: RNCC: 5 | RNVC: 2
1005005215: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-001-1637
Mounting Bracket

330011637
35-61117-0104: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-205-4301
Ball Socket Seat

332054301
3120900077: RNCC: 3 | RNVC: 2
9682.101.1602: RNCC: 5 | RNVC: 2

22 Sep 2006

5340-33-161-1507
Mounting Bracket

331611507
318934: RNCC: 3 | RNVC: 2

11 Dec 1992

5340-33-206-4106
Stand Base

332064106
STB XBA 2100: RNCC: 3 | RNVC: 2

27 Dec 2007

5340-33-166-1241
Retaining Strap

331661241
0210008-5: RNCC: 3 | RNVC: 2

11 Dec 1995

5340-33-158-5603
Retaining Strap

331585603
-0141019-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-158-2224
Retaining Clip

331582224
0216511-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-2994
Mounting Plate

332112994
5061543: RNCC: 3 | RNVC: 2
1.164.91.005: RNCC: 5 | RNVC: 2

13 Aug 2013

5340-33-200-0876
Mounting Plate

332000876
322539: RNCC: 3 | RNVC: 2

5 Oct 2001

5340-33-154-7487
Butt Hinge

331547487
321649: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-136-5032
Loop Clamp

331365032
SBA-MB1-TOA-113: RNCC: 3 | RNVC: 2

26 Oct 1993

5340-33-003-4125
Loop Clamp

330034125
R508-G38: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-157-7352
Blank Panel

331577352
323302: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-7473
Pipe Hanger

331607473
95.601.940: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-004-9652
Access Door Hinge

330049652
2000320: RNCC: 3 | RNVC: 2

26 Apr 2000

5340-33-202-3018
Strap Fastener Loop

332023018
40340-21: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-33-001-1740
Mounting Bracket

330011740
35-61394-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-115-9579
Mounting Plate

331159579
6.324.4.340.017.4: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-5503
Mounting Plate

332025503
W290684804100: RNCC: 3 | RNVC: 2

13 Aug 2003

5340-33-107-4653
Angle Bracket

331074653
7356.252.4370: RNCC: 3 | RNVC: 2
2510011281: RNCC: 5 | RNVC: 2

15 Nov 1999

5340-33-200-5948
Retaining Strap

332005948
WW 488 324: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-201-2188
Utility Access Door

332012188
A2810493-001: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-001-3398
Retaining Strap

330013398
92014629: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-001-3930
Expansion Plug

330013930
92020346: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-125-9777
Access Cover

331259777
F30087-K500-C2: RNCC: 3 | RNVC: 2

5 Oct 1995

5340-33-181-5032
Loop Clamp

331815032
SS-06-0164V: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-158-8954
Loop Clamp

331588954
-018034: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-200-2279
Access Cover

332002279
223571403-01: RNCC: 3 | RNVC: 2

15 Nov 2001

5340-33-200-2270
Mounting Plate

332002270
723571434-01: RNCC: 3 | RNVC: 2

15 Nov 2001

5340-33-116-1590
Mounting Bracket

331161590
3 102 792: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-2988
Angle Bracket

332112988
5045578: RNCC: 3 | RNVC: 2
1.164.02.001: RNCC: 5 | RNVC: 2

13 Aug 2013

5340-33-204-4872
Access Cover

332044872
191008002: RNCC: 3 | RNVC: 2
191008002: RNCC: 5 | RNVC: 2

21 Sep 2005

5340-33-108-2561
Utility Access Door

331082561
9644.251.0213: RNCC: 3 | RNVC: 2
2510009745: RNCC: 5 | RNVC: 2
2510009745: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-203-9526
Mounting Bracket

332039526
20950706: RNCC: 3 | RNVC: 2
33R288291: RNCC: 5 | RNVC: 1

27 Jan 2005

5340-33-116-6384
Bridge Clamp

331166384
15 A-225: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-8893
Access Cover

331548893
1 125 824 192: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-203-8754
Mounting Bracket

332038754
114652-66881: RNCC: 3 | RNVC: 2

15 Dec 2004

5340-33-107-6312
Angle Bracket

331076312
7060.252.0096: RNCC: 3 | RNVC: 2
2510700791: RNCC: 5 | RNVC: 2

18 May 2000

5340-33-204-3095
Access Cover

332043095
706100302: RNCC: 3 | RNVC: 2

30 Jun 2005

5340-33-201-9948
Loop Clamp

332019948
4122400666: RNCC: 3 | RNVC: 2

9 Dec 2002

5340-33-204-4643
Mounting Plate

332044643
J92563810-402: RNCC: 3 | RNVC: 2

19 Sep 2005

5340-33-154-6567
Door Handle

331546567
736227: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-155-0410
Door Handle

331550410
910173: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-33-206-1189
Mounting Bracket

332061189
CBN60525P33: RNCC: 3 | RNVC: 2

21 Aug 2007

5340-33-115-8163
Access Cover

331158163
10356002460: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-106-7373
Angle Bracket

331067373
318718: RNCC: 3 | RNVC: 2
318718: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-205-4449
Mounting Plate

332054449
5038426: RNCC: 3 | RNVC: 2
1.124.60.006.02-A: RNCC: 5 | RNVC: 2

3 Oct 2006

5340-33-203-6103
Mounting Plate

332036103
PCAMI/RP/1200004050179: RNCC: 3 | RNVC: 2
4.050-179.0: RNCC: 3 | RNVC: 2

12 Jun 2004

5340-33-154-2220
Mending Plate

331542220
567525: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-206-7600
Utility Resilient Mount

332067600
137101: RNCC: 3 | RNVC: 2

9 Jun 2008

5340-33-145-6311
Angle Bracket

331456311
TAB. H1-10: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-181-6324
Mounting Plate

331816324
-01700300-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-1421
Webbing Strap

332011421
SP03739-1: RNCC: 3 | RNVC: 2

16 May 2002

5340-33-200-9746
Mounting Bracket

332009746
2510008330: RNCC: 3 | RNVC: 2
2510008330: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-161-2639
Mounting Bracket

331612639
315266: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-33-000-6935
Loop Clamp

330006935
527044: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-180-5566
Access Cover

331805566
139984: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-004-5568
Mounting Bracket

330045568
NN53348P01: RNCC: 3 | RNVC: 2

23 Jun 1999

Load More Results