What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 23 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 23 of 39

5340-33-206-1861
Mounting Plate

332061861
CBD58505P72: RNCC: 3 | RNVC: 2

20 Sep 2007

5340-33-003-4395
Mounting Bracket

330034395
SP-00353: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-001-1625
Mounting Bracket

330011625
35-61102-0702: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-107-3408
Rod End Clevis

331073408
61.12.151: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-206-1846
Mechanical Stop

332061846
CBD58505P03: RNCC: 3 | RNVC: 2

20 Sep 2007

5340-33-000-6691
Retaining Strap

330006691
595921: RNCC: 1 | RNVC: 2

7 Sep 1988

5340-33-181-5786
Access Cover

331815786
-01201388: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-108-4195
Webbing Strap

331084195
9644.250.0889: RNCC: 3 | RNVC: 2
1005006125: RNCC: 5 | RNVC: 2
1005006125: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-106-0603
Mending Plate

331060603
M47.510.007: RNCC: 3 | RNVC: 2

28 Dec 1996

5340-33-107-9610
Mounting Bracket

331079610
00.900.10.060: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-33-108-5327
Mounting Bracket

331085327
9644.590.0040: RNCC: 3 | RNVC: 2
2510007395: RNCC: 5 | RNVC: 2
2510007395: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-114-5005
Runner

331145005
5TG 4-92: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-000-6680
Retaining Strap

330006680
563619: RNCC: 1 | RNVC: 2

7 Sep 1988

5340-33-158-6552
Access Cover

331586552
764849: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-107-7411
Mounting Bracket

331077411
W290684002100: RNCC: 3 | RNVC: 2

19 May 2000

5340-33-200-6625
Access Cover

332006625
9505: RNCC: 3 | RNVC: 2

21 Feb 2002

5340-33-200-9820
Mounting Bracket

332009820
2510009165: RNCC: 3 | RNVC: 2
2510009165: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-201-8240
Cushioning Pad

332018240
9330000221: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-200-7957
Mounting Plate

332007957
320235: RNCC: 3 | RNVC: 2

12 Mar 2002

5340-33-154-5672
Mending Plate

331545672
319032: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-204-4140
Mounting Bracket

332044140
W280698406007: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-155-7689
Angle Bracket

331557689
2520000267: RNCC: 3 | RNVC: 2
318559: RNCC: 3 | RNVC: 2
318559: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-204-0883
Access Cover

332040883
9673.250.0510: RNCC: 3 | RNVC: 2
2510900649: RNCC: 5 | RNVC: 2
2510900649: RNCC: 5 | RNVC: 2

14 Mar 2005

5340-33-155-0429
Mounting Bracket

331550429
A484: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-181-3427
Mending Plate

331813427
-07700475-1: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-6594
Angle Bracket

332006594
7356.252.2060: RNCC: 3 | RNVC: 2
2530000961: RNCC: 5 | RNVC: 2

21 Feb 2002

5340-33-115-8170
Access Cover

331158170
92130328002: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-107-3038
Mounting Plate

331073038
21124506500: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-158-9562
Access Cover

331589562
2207.49: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-0473
Mechanical Stop

331080473
9644.281.5019: RNCC: 3 | RNVC: 2
2520000422: RNCC: 5 | RNVC: 2
2520000422: RNCC: 5 | RNVC: 2

11 Dec 2000

5340-33-203-2098
Bridge Clamp

332032098
2540901598: RNCC: 3 | RNVC: 2
2540901598: RNCC: 5 | RNVC: 2

16 Feb 2004

5340-33-210-9914
Mounting Bracket

332109914
TOM0820029: RNCC: 3 | RNVC: 2
TOM0820029: RNCC: 3 | RNVC: 2

3 May 2013

5340-33-108-5304
Mounting Bracket

331085304
9644.250.2170: RNCC: 3 | RNVC: 2
1005006136: RNCC: 5 | RNVC: 2
1005006136: RNCC: 5 | RNVC: 2

27 Apr 2001

5340-33-116-7609
Loop Clamp

331167609
3090201610: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-0257
Butt Hinge

331540257
801433: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-001-3693
Compression Cup

330013693
92019230: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-155-7552
Mending Plate

331557552
712913: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-001-7203
Access Cover

330017203
35-22833-0003A01: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-190-5389
Angle Bracket

331905389
43176501-001: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-116-7841
Mending Plate

331167841
01.00373/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-9447
Mounting Bracket

332049447
0309044: RNCC: 3 | RNVC: 2

24 Feb 2006

5340-33-155-6282
Access Cover

331556282
900200: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-102-0666
Retaining Strap

331020666
106-2: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-211-1240
Mounting Bracket

332111240
VR01180800: RNCC: 3 | RNVC: 2
VR01180800: RNCC: 3 | RNVC: 2

16 Jun 2013

5340-33-180-5660
Rigid Caster

331805660
159378: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-106-3890
Leather Strap

331063890
5340.000251: RNCC: 3 | RNVC: 2
5340.000251: RNCC: 5 | RNVC: 2

3 Dec 1997

5340-33-004-3170
Turnbuckle Body

330043170
026 109 243: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-33-157-8437
Angle Bracket

331578437
753636: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-2459
Mounting Bracket

332052459
CBD56501P49: RNCC: 3 | RNVC: 2

30 Jun 2006

5340-33-155-7458
Mending Plate

331557458
319456: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-155-7761
Angle Bracket

331557761
317325: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-204-3974
Sliding Door Track

332043974
TRAN0160029: RNCC: 3 | RNVC: 2

8 Sep 2005

5340-33-155-7764
Angle Bracket

331557764
731442: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-154-6500
Loop Clamp

331546500
3090211649: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-001-9632
Access Cover

330019632
35-22837-0003A01: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-33-106-4628
Clamp Bolt Assembly

331064628
0180021: RNCC: 3 | RNVC: 2
ALMCTI-1000000180021: RNCC: 5 | RNVC: 1

6 Mar 1998

5340-33-000-9601
Retaining Strap

330009601
35-10000-1701: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-106-8880
Mounting Bracket

331068880
319395: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-000-2476
Expansion Plug

330002476
3340902011: RNCC: 1 | RNVC: 2
3340902011: RNCC: 3 | RNVC: 2

22 May 1987

5340-33-160-3793
Retaining Strap

331603793
26.140.229: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-8271
Access Cover

331068271
7356.252.0756: RNCC: 3 | RNVC: 2
2910000504: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-145-5319
Mounting Bracket

331455319
74-605: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-000-9798
Mounting Bracket

330009798
35-21215-1102: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-000-6919
Loop Clamp

330006919
190143: RNCC: 1 | RNVC: 2
4007258: RNCC: 3 | RNVC: 2

8 Sep 1988

5340-33-200-0208
Block Clamp

332000208
WW 488 103: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-33-203-9936
Angle Bracket

332039936
NN60920P01: RNCC: 3 | RNVC: 2

31 Jan 2005

5340-33-103-5153
Retaining Strap

331035153
1443-22-23: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-161-7026
Padlock

331617026
300/70: RNCC: 3 | RNVC: 2
F12008080: RNCC: 5 | RNVC: 2

26 Apr 1995

5340-33-200-1057
Bow Handle

332001057
7063.252.0117: RNCC: 3 | RNVC: 2
2510701234: RNCC: 5 | RNVC: 2

8 Oct 2001

5340-33-201-1398
Mounting Bracket

332011398
7054.252.2080: RNCC: 3 | RNVC: 2
6530700016: RNCC: 5 | RNVC: 2

16 May 2002

5340-33-000-6964
Loop Clamp

330006964
589170: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-001-0532
Mounting Bracket

330010532
35-46208-0006: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-202-9261
Mounting Plate

332029261
DW 201 457 A: RNCC: 3 | RNVC: 2

1 Dec 2003

5340-33-200-3904
Mechanical Stop

332003904
CF 472 822 A: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-102-3845
Clevis And U-Bolt

331023845
MB51-3-29: RNCC: 3 | RNVC: 2
MB51-3-29: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-7472
Mending Plate

331557472
508177: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-106-6473
Mending Plate

331066473
REM-25-2-2-9: RNCC: 3 | RNVC: 2

3 Dec 1998

5340-33-108-1804
Mounting Bracket

331081804
7054.252.0250: RNCC: 3 | RNVC: 2
2540700043: RNCC: 5 | RNVC: 2

29 Jan 2001

5340-33-108-4421
Mounting Plate

331084421
9644.250.5271: RNCC: 3 | RNVC: 2
2540000808: RNCC: 5 | RNVC: 2
2540000808: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-108-0688
Mounting Bracket

331080688
7059.252.0340: RNCC: 3 | RNVC: 2
2510700701: RNCC: 5 | RNVC: 2

5 Dec 2000

5340-33-105-2742
Access Door Hinge

331052742
-0111135-2: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-209-5376
Utility Resilient Mount

332095376
134032: RNCC: 3 | RNVC: 2

17 Jan 2012

5340-33-104-0174
Expansion Plug

331040174
616238: RNCC: 3 | RNVC: 2
616238: RNCC: 3 | RNVC: 2

31 Mar 1999

5340-33-001-9233
Mounting Bracket

330019233
C-18040-1-0-CR-19: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-160-3665
Vent Plug

331603665
EV-2465: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-4431
Access Door Hinge

330014431
92026317: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-107-7328
Utility Access Door

331077328
7562.252.1380: RNCC: 3 | RNVC: 2
2510700341: RNCC: 5 | RNVC: 2

20 Jun 2000

5340-33-189-2157
Access Cover

331892157
01600120: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-155-7459
Mending Plate

331557459
509639: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-126-9508
Angle Bracket

331269508
4503810: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-114-5044
Mounting Bracket

331145044
5TG 5-240: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-001-0887
Mounting Bracket

330010887
35-46575-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-005-0573
Block Clamp

330050573
NN57880P01: RNCC: 3 | RNVC: 2

13 Jun 2000

5340-33-161-1352
Mounting Plate

331611352
0234.16: RNCC: 3 | RNVC: 2

31 Jul 1995

5340-33-107-4489
Retaining Strap

331074489
W280680700908: RNCC: 3 | RNVC: 2

2 Nov 1999

5340-33-200-0245
Mounting Plate

332000245
D0931430622: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-33-201-0449
Retaining Strap

332010449
5340900070: RNCC: 3 | RNVC: 2
5340900070: RNCC: 5 | RNVC: 2

24 Apr 2002

5340-33-154-5550
Retaining Strap

331545550
752507: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-001-0027
Mending Plate

330010027
35-32243-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-115-5587
Clamping Catch

331155587
A1-10-701-20: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-9397
Bumper

332069397
152005: RNCC: 3 | RNVC: 2
G-060: RNCC: 5 | RNVC: 2

23 Sep 2008

5340-33-102-0216
Rod End Clevis

331020216
2510-000110: RNCC: 3 | RNVC: 2
2510000110: RNCC: 5 | RNVC: 2
411.090.0469: RNCC: 5 | RNVC: 2

6 Aug 1992

5340-33-106-9674
Access Cover

331069674
605194: RNCC: 3 | RNVC: 2

18 May 1999

5340-33-107-6519
Leather Strap

331076519
10120208570: RNCC: 3 | RNVC: 2

17 Mar 2000

5340-33-003-6732
Access Cover

330036732
2510003319: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-200-5868
Mending Plate

332005868
CF 472 902 A: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-200-4087
Loop Clamp

332004087
Q 314 176 114: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-181-5592
Mounting Plate

331815592
-01200333: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-6357
Access Cover

332006357
730120021: RNCC: 3 | RNVC: 2

14 Feb 2002

5340-33-201-6188
Mounting Bracket

332016188
NN60617P04: RNCC: 3 | RNVC: 2

16 Sep 2002

5340-33-106-7488
Flange Protector

331067488
2510.002980: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-155-1835
Access Cover

331551835
24,7.502: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-33-206-2098
Rod End Clevis

332062098
35-94070-1201: RNCC: 3 | RNVC: 2

26 Sep 2007

5340-33-001-2216
Mounting Bracket

330012216
35-75421-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-154-3828
Access Cover

331543828
524748: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-115-8658
Loop Clamp

331158658
M.D.75E.2.1./2": RNCC: 3 | RNVC: 2

18 Sep 1992

5340-33-204-8633
Bumper

332048633
72372-85C00: RNCC: 3 | RNVC: 2

15 Feb 2006

5340-33-003-7777
Mounting Plate

330037777
7700564787: RNCC: 3 | RNVC: 2

5 Jun 1998

5340-33-003-6860
Access Cover

330036860
M51I706053084: RNCC: 3 | RNVC: 2

1 Jun 1998

5340-33-203-9513
Access Cover

332039513
20880757: RNCC: 3 | RNVC: 2
33R277116: RNCC: 5 | RNVC: 1

27 Jan 2005

5340-33-200-0812
Access Cover

332000812
7054.252.0470: RNCC: 3 | RNVC: 2
2510700875: RNCC: 5 | RNVC: 2

5 Oct 2001

5340-33-211-2951
Mounting Bracket

332112951
SP08499: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-33-107-2284
Beam Gripping Clamp

331072284
32330001030: RNCC: 3 | RNVC: 2

25 Jun 1999

5340-33-155-0664
Loop Clamp

331550664
5628.23: RNCC: 3 | RNVC: 2
562823: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-000-0464
Loop Clamp

330000464
H350GS/D024: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-161-7016
Padlock

331617016
401/30: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-002-1539
Mounting Bracket

330021539
317765: RNCC: 3 | RNVC: 2

1 Jul 1993

5340-33-200-6685
Mounting Plate

332006685
319353: RNCC: 3 | RNVC: 2

22 Feb 2002

5340-33-106-8878
Mounting Bracket

331068878
317876: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-200-9965
Mounting Bracket

332009965
2510901427: RNCC: 3 | RNVC: 2
2510901427: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-157-7493
Angle Bracket

331577493
537287: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-5022
Loop Clamp

331565022
-27037-G2501: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-5005
Loop Clamp

331565005
-22441-Q4940: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-5468
Angle Bracket

332055468
95-25942-0702: RNCC: 3 | RNVC: 2

14 Dec 2006

5340-33-107-4496
Access Cover

331074496
54-60006-31: RNCC: 3 | RNVC: 2

2 Nov 1999

5340-33-102-2936
Mounting Bracket

331022936
976-B-12: RNCC: 3 | RNVC: 2

11 Jan 1991

5340-33-001-0908
Mounting Bracket

330010908
35-46628-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-204-5465
Expansion Plug

332045465
6705924P010MAS: RNCC: 3 | RNVC: 2

11 Oct 2005

5340-33-181-5178
Mechanical Stop

331815178
S-50-LD9: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-158-2216
Retaining Clip

331582216
0216504-8: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-0452
Expansion Plug

331540452
806224: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-180-6172
Loop Clamp

331806172
188420: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-180-6361
Access Door Hinge

331806361
193043: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-161-7043
Padlock

331617043
700/90: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-200-8914
Angle Bracket

332008914
W290698606200: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-33-001-5075
Bumper

330015075
92029209: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-001-3822
Access Cover

330013822
92020156: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-156-2345
Angle Bracket

331562345
-55203-G9500: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-181-1116
Retaining Clip

331811116
-16761-99002: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-002-8172
Ball Socket Seat

330028172
FA01231704: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-116-2489
Mounting Plate

331162489
408.118-2: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-1490
Retaining Strap

331061490
5.115.312.0 - MEISA: RNCC: 3 | RNVC: 2

14 May 1997

5340-33-103-2368
Angle Bracket

331032368
4730-000167: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-181-7836
Angle Bracket

331817836
-07700608-1: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-188-7515
Loop Clamp

331887515
6.0402.20.2.0285: RNCC: 3 | RNVC: 2

21 Sep 1995

5340-33-108-4227
Mounting Bracket

331084227
0639.590.3002: RNCC: 3 | RNVC: 2
2510007513: RNCC: 5 | RNVC: 2
2510007513: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-201-7302
Loop Clamp

332017302
EN4114F16NH1: RNCC: 2 | RNVC: 2

15 Oct 2002

5340-33-205-4318
Mounting Bracket

332054318
W280683103009: RNCC: 3 | RNVC: 2

25 Sep 2006

5340-33-154-5367
Expansion Plug

331545367
3340900811: RNCC: 3 | RNVC: 2
3340900811: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-204-1377
Mounting Bracket

332041377
064.06.01.20.M04: RNCC: 3 | RNVC: 2

7 Apr 2005

5340-33-204-4536
Synchro Clamp

332044536
720124533: RNCC: 3 | RNVC: 2

15 Sep 2005

5340-33-001-5264
Angle Bracket

330015264
92032701: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-202-8956
Access Cover

332028956
999064652: RNCC: 3 | RNVC: 2
999064652: RNCC: 5 | RNVC: 2

26 Nov 2003

5340-33-187-4979
Loop Clamp

331874979
589452: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-108-3462
Access Cover

331083462
-32131-CB000: RNCC: 3 | RNVC: 2

28 Feb 2001

5340-33-108-4428
Catch Strike

331084428
9644.250.5876: RNCC: 3 | RNVC: 2
2540001004: RNCC: 5 | RNVC: 2
2540001004: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-203-2723
Cushioning Pad

332032723
9673.250.5995: RNCC: 3 | RNVC: 2
2540901534: RNCC: 5 | RNVC: 2
2540901534: RNCC: 5 | RNVC: 2

19 Feb 2004

5340-33-108-0132
Mounting Plate

331080132
0639.250.9945: RNCC: 3 | RNVC: 2
2530000395: RNCC: 5 | RNVC: 2
2530000395: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-000-0453
Angle Bracket

330000453
H350GS/D040: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-107-3985
Caster Frame

331073985
RE-25-2-5-6: RNCC: 3 | RNVC: 2
RE-50-2-8-6: RNCC: 5 | RNVC: 2

15 Oct 1999

5340-33-107-9764
Surface Bolt

331079764
9644.250.8300: RNCC: 3 | RNVC: 2
2540001241: RNCC: 5 | RNVC: 2
2540001241: RNCC: 5 | RNVC: 2

2 Nov 2000

5340-33-180-8046
Retaining Clip

331808046
571163: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-207-0223
Utility Resilient Mount

332070223
110031: RNCC: 3 | RNVC: 2
M18111: RNCC: 5 | RNVC: 2

14 Oct 2008

5340-33-154-0563
Mending Plate

331540563
803193: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-003-7722
Mounting Bracket

330037722
8143790: RNCC: 3 | RNVC: 2

5 Jun 1998

5340-33-202-7083
Mounting Bracket

332027083
9673.250.6850: RNCC: 3 | RNVC: 2
2540900871: RNCC: 5 | RNVC: 2
2540900871: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-158-5364
Access Door Hinge

331585364
-01101848-1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-9788
Protection Bellows

332039788
500002515: RNCC: 3 | RNVC: 2

31 Jan 2005

5340-33-000-0303
Retaining Strap

330000303
1240000004: RNCC: 1 | RNVC: 2
1240-000004: RNCC: 3 | RNVC: 2

19 Sep 1985

5340-33-108-5618
Lock Bolt

331085618
0639.250.3115: RNCC: 3 | RNVC: 2
5340001506: RNCC: 5 | RNVC: 2
5340001506: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-102-3173
Detent Plunger

331023173
94: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-33-001-1548
Mounting Bracket

330011548
35-56201-0302: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-004-2792
Access Cover

330042792
730030009: RNCC: 3 | RNVC: 2

25 Nov 1998

5340-33-004-8938
Mechanical Stop

330048938
4068304141: RNCC: 3 | RNVC: 2

27 Jan 2000

5340-33-003-4790
Door Handle

330034790
105 6917: RNCC: 3 | RNVC: 2

5 Nov 1997

5340-33-107-7018
Angle Bracket

331077018
7562.252.1490: RNCC: 3 | RNVC: 2
1055700007: RNCC: 5 | RNVC: 2

20 Jun 2000

5340-33-154-4156
Loop Clamp

331544156
3090214849: RNCC: 3 | RNVC: 2
3090214849: RNCC: 3 | RNVC: 2
91105918: RNCC: 5 | RNVC: 9

5 Dec 1990

5340-33-125-5973
Loop Clamp

331255973
915998105001: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-0465
Mounting Bracket

332030465
GM783057E0: RNCC: 3 | RNVC: 2

20 Jan 2004

5340-33-155-2090
Hinged Hasp

331552090
25,14.14: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-33-205-3459
Filler Opening Cap

332053459
4011087: RNCC: 3 | RNVC: 2

18 Aug 2006

5340-33-106-4859
Hinge Torsion Bar

331064859
57521913: RNCC: 3 | RNVC: 2
589069: RNCC: 5 | RNVC: 9

6 Mar 1998

5340-33-205-4147
Mounting Bracket

332054147
W290685401700: RNCC: 3 | RNVC: 2

15 Sep 2006

5340-33-161-7020
Padlock

331617020
300/20: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-115-9274
Mounting Plate

331159274
DSH-125: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-3725
Mounting Bracket

331073725
REM-25-4-3-4: RNCC: 3 | RNVC: 2

4 Oct 1999

5340-33-108-2333
Mounting Plate

331082333
0640.120.0031: RNCC: 3 | RNVC: 2
2510004596: RNCC: 5 | RNVC: 2
2510004596: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-201-2428
Turnbuckle

332012428
120-0952-04: RNCC: 3 | RNVC: 2

11 Jun 2002

5340-33-001-1057
Mounting Bracket

330011057
35-46735-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-000-0910
Rim Latch

330000910
H350GS/D075: RNCC: 1 | RNVC: 2

13 Mar 1997

5340-33-201-2185
Utility Access Door

332012185
A2810490-401: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-202-9875
Access Door Hinge

332029875
723551817-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-116-7113
Access Cover

331167113
14.22.01.4: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-4764
Angle Bracket

330014764
92026793: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-107-9998
Access Cover

331079998
0639.250.0514: RNCC: 3 | RNVC: 2
2540000617: RNCC: 5 | RNVC: 2
2540000617: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-003-0676
Retaining Strap

330030676
5430000108: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-200-9753
Mounting Bracket

332009753
2510008343: RNCC: 3 | RNVC: 2
2510008343: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-003-5043
Utility Access Door

330035043
R-103: RNCC: 3 | RNVC: 2
17364336/7: RNCC: 5 | RNVC: 2

12 Nov 1997

5340-33-001-4062
Bumper

330014062
92021361: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-108-4273
Mechanical Stop

331084273
9644.590.5022: RNCC: 3 | RNVC: 2
2510009340: RNCC: 5 | RNVC: 2
2510009340: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-107-7877
Flush Catch Claw

331077877
W290684602900: RNCC: 3 | RNVC: 2

3 Aug 2000

5340-33-160-5813
Mechanical Stop

331605813
91.509.117.80: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-6997
Loop Clamp

330006997
783614: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-157-9416
Mending Plate

331579416
735792: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-7747
Angle Bracket

331067747
34768: RNCC: 3 | RNVC: 2
4350381: RNCC: 5 | RNVC: 2

15 Mar 1999

5340-33-002-9633
Door Handle

330029633
6317601059: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-190-5587
Mounting Bracket

331905587
43176773-002: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-161-4386
Retaining Clip

331614386
239673: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-180-5470
Loop Clamp

331805470
120701: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-001-0093
Mounting Bracket

330010093
35-34057-0103: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-180-5104
Access Cover

331805104
G04027: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-002-9704
Retaining Clip

330029704
6318330070: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-209-3154
Mounting Plate

332093154
INS003002050050000: RNCC: 3 | RNVC: 2

29 Sep 2011

5340-33-155-7724
Angle Bracket

331557724
500006522: RNCC: 3 | RNVC: 2
750131: RNCC: 5 | RNVC: 9
750131: RNCC: 6 | RNVC: 9
750151: RNCC: 6 | RNVC: 9

18 Oct 1990

5340-33-106-9529
Mounting Bracket

331069529
7-150: RNCC: 3 | RNVC: 2
PCAMI/RP/0700000557/N: RNCC: 5 | RNVC: 2
PCAMI/RP/0700000557: RNCC: 6 | RNVC: 9

18 May 1999

5340-33-004-5136
Mounting Bracket

330045136
61326: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-004-1881
Access Cover

330041881
230096335: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-157-7909
Access Cover

331577909
639007: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-1573
Mounting Bracket

331031573
1005-004236: RNCC: 3 | RNVC: 2
1225: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-002-9156
Handle Grip

330029156
6014270020: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-003-4223
Mounting Plate

330034223
11.28974-0155: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-202-3426
Doorstop

332023426
10.50.12: RNCC: 3 | RNVC: 2

10 Apr 2003

5340-33-116-4505
Loop Clamp

331164505
92290600290: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-201-3843
Access Cover

332013843
223581410-01: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-33-202-5164
Mounting Plate

332025164
722421712-01: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-33-107-3013
Access Cover

331073013
21124195100: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-001-0420
Mounting Bracket

330010420
35-46101-1401: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-107-4951
Mounting Plate

331074951
W290684780700: RNCC: 3 | RNVC: 2

1 Dec 1999

5340-33-000-7769
Bow Handle

330007769
423200004300000: RNCC: 3 | RNVC: 2

1 Dec 1988

5340-33-203-3368
Mounting Bracket

332033368
4128-676: RNCC: 3 | RNVC: 2

3 Mar 2004

5340-33-157-7556
Angle Bracket

331577556
548049: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-9022
Mending Plate

331579022
319358: RNCC: 3 | RNVC: 2
319358: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-190-5288
Access Cover

331905288
JC15: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-106-5315
Locking Stay

331065315
A0201010: RNCC: 3 | RNVC: 2

8 Apr 1998

5340-33-210-9623
Mounting Bracket

332109623
BL 1035: RNCC: 3 | RNVC: 2

23 Apr 2013

5340-33-001-4034
Compression Cup

330014034
92021301: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-154-5557
Retaining Strap

331545557
802830: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-004-2650
Catch Strike

330042650
730096332: RNCC: 3 | RNVC: 2

12 Nov 1998

5340-33-206-0450
Catch Strike

332060450
-65480-9X000: RNCC: 3 | RNVC: 2

11 Jul 2007

5340-33-003-5079
Door Handle

330035079
95517653TL: RNCC: 3 | RNVC: 2

13 Nov 1997

5340-33-205-8554
Mounting Bracket

332058554
1000867-001: RNCC: 3 | RNVC: 2

20 Apr 2007

5340-33-204-1256
Retaining Strap

332041256
2540901475: RNCC: 3 | RNVC: 2

4 Apr 2005

5340-33-190-3885
Loop Clamp

331903885
2235: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-106-3179
Mounting Bracket

331063179
631 317 01 26: RNCC: 3 | RNVC: 2

4 Sep 1997

5340-33-157-8256
Angle Bracket

331578256
744587: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-7714
Angle Bracket

331557714
642125: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-200-3714
Mounting Bracket

332003714
C 6662 171: RNCC: 3 | RNVC: 2

21 Jan 2002

5340-33-001-8420
Expansion Shield

330018420
20050-576E: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-106-9661
Cushioning Pad

331069661
420803: RNCC: 3 | RNVC: 2
SP07507: RNCC: 5 | RNVC: 2

18 May 1999

5340-33-103-9711
Mounting Bracket

331039711
373387: RNCC: 3 | RNVC: 2

25 Sep 1995

5340-33-201-9516
Mounting Plate

332019516
223591312-01: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-33-204-1367
Buckle

332041367
300HP53015: RNCC: 3 | RNVC: 2
PCAMI/RP/31C0501000: RNCC: 5 | RNVC: 1

7 Apr 2005

5340-33-106-8750
Mending Plate

331068750
7356.592.0036: RNCC: 3 | RNVC: 2
2510009715: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-108-4516
Cushioning Pad

331084516
9644.251.6493: RNCC: 3 | RNVC: 2
2590900113: RNCC: 5 | RNVC: 2
2590900113: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-209-4613
Utility Guard Rail Section

332094613
0663.40.1500.00: RNCC: 3 | RNVC: 2

27 Dec 2011

5340-33-207-8268
Utility Resilient Mount

332078268
SH-19-3872: RNCC: 3 | RNVC: 2
531523: RNCC: 5 | RNVC: 2

27 Oct 2009

5340-33-200-4427
Access Cover

332004427
WW 321 486: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-156-4996
Loop Clamp

331564996
-24220-H8502: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-1540
Mounting Bracket

332001540
PN11631740P02: RNCC: 3 | RNVC: 2

22 Oct 2001

5340-33-157-7101
Access Cover

331577101
311605: RNCC: 3 | RNVC: 2
311605: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-116-6269
Access Cover

331166269
701.011.002: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-8473
Mounting Bracket

332038473
208900043: RNCC: 3 | RNVC: 2
208900043: RNCC: 5 | RNVC: 2

1 Dec 2004

5340-33-206-1219
Retaining Strap

332061219
403197: RNCC: 3 | RNVC: 2
403197: RNCC: 5 | RNVC: 2
5340-33-R02-4429: RNCC: 6 | RNVC: 9

23 Aug 2007

5340-33-161-7033
Padlock

331617033
302/40: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-160-3802
Retaining Strap

331603802
79.03.083.151: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-8179
Mounting Bracket

331068179
195810: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-204-4069
Access Cover

332044069
500.002.00: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-161-3246
Mounting Bracket

331613246
536880: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-103-9870
Bow Handle

331039870
722011003: RNCC: 3 | RNVC: 2

3 Jan 1995

5340-33-102-3929
Handwheel

331023929
MB51-3-33: RNCC: 3 | RNVC: 2
MB51-3-33: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-8938
Access Cover

331068938
7356.252.0055: RNCC: 3 | RNVC: 2
2510009019: RNCC: 5 | RNVC: 2

5 Apr 1999

5340-33-181-0773
Door Handle

331810773
-90606-G9800: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-202-6679
Mounting Bracket

332026679
9673.250.1480: RNCC: 3 | RNVC: 2
1005900377: RNCC: 5 | RNVC: 2
1005900377: RNCC: 5 | RNVC: 2

24 Sep 2003

5340-33-202-9972
Angle Bracket

332029972
MHC2121500: RNCC: 3 | RNVC: 2

19 Dec 2003

5340-33-201-8050
Mounting Bracket

332018050
320541: RNCC: 3 | RNVC: 2

25 Oct 2002

5340-33-204-3669
Mounting Plate

332043669
42536234: RNCC: 3 | RNVC: 2

28 Jul 2005

5340-33-002-9601
Butt Hinge

330029601
6317430551: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-108-0235
Mounting Bracket

331080235
9644.251.9620: RNCC: 3 | RNVC: 2
2540900435: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-209-4671
Utility Guard Rail Section

332094671
0664.10.5000.00: RNCC: 3 | RNVC: 2

27 Dec 2011

5340-33-207-2566
Utility Resilient Mount

332072566
800000/11: RNCC: 3 | RNVC: 2

5 Feb 2009

5340-33-107-0655
Access Hole Frame

331070655
T501020100: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-33-203-6513
Mounting Bracket

332036513
9356.252.7030: RNCC: 3 | RNVC: 2
2510-903905: RNCC: 5 | RNVC: 2

20 Jul 2004

5340-33-202-9098
Angle Bracket

332029098
1025900146: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-161-4935
Mounting Plate

331614935
323022: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-33-154-0266
Butt Hinge

331540266
802956: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-203-1783
Access Cover

332031783
2540900635: RNCC: 3 | RNVC: 2
2540900635: RNCC: 5 | RNVC: 2
9673.590.5600: RNCC: 5 | RNVC: 2

11 Feb 2004

5340-33-003-7035
Mounting Bracket

330037035
317299: RNCC: 3 | RNVC: 2
317299: RNCC: 5 | RNVC: 2

4 Jun 1998

5340-33-001-4945
Compression Cup

330014945
92027607: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-154-6948
Angle Bracket

331546948
761374: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-155-7705
Angle Bracket

331557705
738427: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-189-1734
Elastic Strap

331891734
02240210: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-202-7068
Access Cover

332027068
9673.290.5086: RNCC: 3 | RNVC: 2
2910900078: RNCC: 5 | RNVC: 2
2910900078: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-180-7436
Angle Bracket

331807436
345553: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-157-7322
Access Cover

331577322
320839: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-157-7366
Access Cover

331577366
507675: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-9085
Mounting Bracket

332059085
1.120.03.07.006: RNCC: 3 | RNVC: 2

9 May 2007

5340-33-158-2242
Retaining Clip

331582242
0216534-7: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-4233
Expansion Plug

330004233
3340801649: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-200-3881
Access Cover

332003881
CF 333 530 AR: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-155-8972
Angle Bracket

331558972
5340001078: RNCC: 3 | RNVC: 2
313294: RNCC: 3 | RNVC: 2
313294: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-155-7507
Mending Plate

331557507
780208: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-103-1059
Bumper

331031059
2510-002111: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-5003
Retaining Strap

330015003
92027671: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-001-4424
Retaining Strap

330014424
92026310: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-203-2717
Mounting Bracket

332032717
9673.250.6024: RNCC: 3 | RNVC: 2
2540901565: RNCC: 5 | RNVC: 2
2540901565: RNCC: 5 | RNVC: 2

19 Feb 2004

5340-33-001-4521
Access Cover

330014521
92026453: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-106-8859
Angle Bracket

331068859
7356.252.2850: RNCC: 3 | RNVC: 2
1055001775: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-181-6374
Handle Grip

331816374
-01900262-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-157-7769
Angle Bracket

331577769
595917: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-2885
Mounting Plate

332062885
XX-423206004201: RNCC: 3 | RNVC: 2
423206004201: RNCC: 5 | RNVC: 2
XX-423206004200: RNCC: 5 | RNVC: 2

24 Oct 2007

5340-33-154-9837
Mounting Bracket

331549837
V-37501: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-105-2744
Mending Plate

331052744
-14200135-0: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-106-5542
Mounting Bracket

331065542
17347: RNCC: 3 | RNVC: 2

3 Jul 1998

5340-33-102-4003
Snap Hook

331024003
MB51-8-8: RNCC: 3 | RNVC: 2
MB51-8-8: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-4292
Mounting Plate

332004292
7054.252.0092: RNCC: 3 | RNVC: 2
2540700036: RNCC: 5 | RNVC: 2

25 Jan 2002

5340-33-003-7836
Loop Clamp

330037836
1039576: RNCC: 3 | RNVC: 2

9 Jun 1998

5340-33-187-5530
Loop Clamp

331875530
0201403-3: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-1380
Mounting Bracket

332041380
064.19.01.M01: RNCC: 3 | RNVC: 2

7 Apr 2005

5340-33-205-6553
Mounting Plate

332056553
1025900912: RNCC: 3 | RNVC: 2
9682.101.1654: RNCC: 5 | RNVC: 2

5 Feb 2007

5340-33-201-6950
Angle Bracket

332016950
319790: RNCC: 3 | RNVC: 2

3 Oct 2002

5340-33-187-5605
Loop Clamp

331875605
0301166-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-115-9268
Mounting Plate

331159268
DSH-765: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-4386
Mechanical Stop

330044386
87.19.02.CT.52: RNCC: 3 | RNVC: 2

26 Mar 1999

5340-33-154-6484
Loop Clamp

331546484
197342: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-33-108-2408
Utility Access Door

331082408
9644.250.0520: RNCC: 3 | RNVC: 2
2510006796: RNCC: 5 | RNVC: 2
2510006796: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-106-1853
Mounting Bracket

331061853
1777B4146/2.2.01: RNCC: 3 | RNVC: 2

18 Jun 1997

5340-33-107-8459
Mending Plate

331078459
-06902197-0: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-33-157-0204
Access Cover

331570204
-03902388-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-7995
Doorstop

331067995
6.339-096.0-MEISA: RNCC: 3 | RNVC: 2
PCAMI/RP/1206339096: RNCC: 5 | RNVC: 2

31 Mar 1999

5340-33-001-1790
Mounting Bracket

330011790
35-62524-0101: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-157-7822
Access Cover

331577822
622382: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-6409
Lock-Release Lever

332046409
0850482030800: RNCC: 3 | RNVC: 2

17 Nov 2005

5340-33-108-3655
Blank Panel

331083655
9560 079 53200: RNCC: 3 | RNVC: 2

28 Feb 2001

5340-33-002-9440
Clamping Catch

330029440
63161007507000: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-209-4595
Utility Guard Rail Section

332094595
0663.30.9000.00: RNCC: 3 | RNVC: 2

27 Dec 2011

5340-33-000-6984
Loop Clamp

330006984
770770: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-116-4005
Mounting Bracket

331164005
6131059: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-1645
Mounting Plate

332001645
28110202: RNCC: 3 | RNVC: 2

26 Oct 2001

5340-33-107-7450
Mounting Bracket

331077450
W290684037200: RNCC: 3 | RNVC: 2

25 May 2000

5340-33-001-2082
Mounting Bracket

330012082
35-71200-0401: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-200-8281
Crank Handle

332008281
9644.121.0121: RNCC: 3 | RNVC: 2
2510011171: RNCC: 5 | RNVC: 2
2510011171: RNCC: 5 | RNVC: 2

18 Mar 2002

5340-33-209-4464
Utility Guard Rail Section

332094464
0663.10.3005.00: RNCC: 3 | RNVC: 2

22 Dec 2011

5340-33-211-3945
Mounting Bracket

332113945
0738001530: RNCC: 3 | RNVC: 2

16 Oct 2013

5340-33-001-3565
Compression Cup

330013565
92018105: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-204-0358
Retaining Strap

332040358
36990-85C20: RNCC: 3 | RNVC: 2

8 Feb 2005

5340-33-200-1050
Angle Bracket

332001050
7063.252.0027: RNCC: 3 | RNVC: 2
2510701226: RNCC: 5 | RNVC: 2

5 Oct 2001

5340-33-204-4533
Cushioning Pad

332044533
720124517: RNCC: 3 | RNVC: 2

15 Sep 2005

5340-33-202-6602
Angle Bracket

332026602
9673.590.0004: RNCC: 3 | RNVC: 2
2510900792: RNCC: 5 | RNVC: 2
2510900792: RNCC: 5 | RNVC: 2

23 Sep 2003

5340-33-106-2927
Rod End Clevis

331062927
L10004: RNCC: 3 | RNVC: 2

4 Sep 1997

5340-33-108-2574
Access Cover

331082574
9644.251.0880: RNCC: 3 | RNVC: 2
2510009899: RNCC: 5 | RNVC: 2
2510009899: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-160-3798
Retaining Strap

331603798
26.142.259: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-4448
Webbing Strap

331084448
9644.250.6302: RNCC: 3 | RNVC: 2
2540001221: RNCC: 5 | RNVC: 2
2540001221: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-209-3650
Utility Guard Rail Section

332093650
DF 404 711 AX: RNCC: 3 | RNVC: 2

28 Nov 2011

5340-33-000-6975
Loop Clamp

330006975
646760: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-001-3782
Access Cover

330013782
92020103: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-154-2232
Mending Plate

331542232
640989: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-203-6511
Mounting Bracket

332036511
9356.252.7140: RNCC: 3 | RNVC: 2
2510-903927: RNCC: 5 | RNVC: 2

20 Jul 2004

5340-33-205-8741
Mounting Bracket

332058741
11910-9X800: RNCC: 3 | RNVC: 2
79900082-0: RNCC: 5 | RNVC: 2
993402: RNCC: 5 | RNVC: 2

27 Apr 2007

5340-33-002-9617
Clamping Catch

330029617
6317501084: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-003-6616
Mounting Bracket

330036616
195816: RNCC: 3 | RNVC: 2
4139360022: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-003-2192
Access Cover

330032192
880301236: RNCC: 3 | RNVC: 2
674021: RNCC: 5 | RNVC: 9

27 Jan 1997

5340-33-155-5317
Loop Clamp

331555317
695809: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-004-2864
Angle Bracket

330042864
NN60183P01: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-108-4973
Stand Base

331084973
99.08.113: RNCC: 3 | RNVC: 2

26 Mar 2001

5340-33-155-9009
Access Cover

331559009
312418: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-182-0286
Access Cover

331820286
-996351: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-103-1122
Angle Bracket

331031122
375.091.0400: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-187-4765
Door Handle

331874765
193761: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-155-7451
Mending Plate

331557451
320551: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-157-8438
Angle Bracket

331578438
753637: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-8507
Mechanical Stop

331578507
770699: RNCC: 3 | RNVC: 2
770699: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-33-161-3390
Bumper

331613390
545639: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-202-9344
Cushioning Pad

332029344
CBD50512P64: RNCC: 3 | RNVC: 2

1 Dec 2003

5340-33-004-6190
Access Cover

330046190
1312685: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-108-3077
Block Clamp

331083077
SP05693-19: RNCC: 3 | RNVC: 2

13 Feb 2001

5340-33-107-7408
Mounting Bracket

331077408
W290684001600: RNCC: 3 | RNVC: 2

19 May 2000

5340-33-106-3178
Mounting Bracket

331063178
631 317 00 26: RNCC: 3 | RNVC: 2

4 Sep 1997

5340-33-201-0197
Retaining Strap

332010197
2910900098: RNCC: 3 | RNVC: 2
2910900098: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-205-3030
Access Cover

332053030
11351-29F60: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-33-210-9317
Bumper

332109317
CABM48780010205: RNCC: 3 | RNVC: 2

4 Apr 2013

5340-33-004-4851
Catch Strike

330044851
203292: RNCC: 3 | RNVC: 2

2 Jun 1999

5340-33-004-2853
Angle Bracket

330042853
NN51333P01: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-002-9519
Door Closer

330029519
6317200016: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-200-0707
Access Cover

332000707
T179750 DM-1MAS: RNCC: 3 | RNVC: 2

3 Oct 2001

5340-33-200-1951
Retaining Band

332001951
J57166022-002: RNCC: 3 | RNVC: 2

31 Oct 2001

5340-33-154-9355
Retaining Clip

331549355
FA-544030.00: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-126-4215
Angle Bracket

331264215
C22234-N1000-C54: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-190-5278
Access Cover

331905278
237.40: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-103-1655
Stand Base

331031655
1005-004405: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-7787
Mounting Plate

332027787
M6-87.7.10: RNCC: 3 | RNVC: 2

28 Oct 2003

5340-33-155-7509
Mending Plate

331557509
813051: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-155-7466
Mending Plate

331557466
5340001093: RNCC: 3 | RNVC: 2
317772: RNCC: 3 | RNVC: 2
317772: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-155-8470
Loop Clamp

331558470
0029973090: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-33-203-2097
Cushioning Pad

332032097
2590900147: RNCC: 3 | RNVC: 2
2590900147: RNCC: 5 | RNVC: 2

16 Feb 2004

5340-33-107-9847
Metal Grille

331079847
290.000.003: RNCC: 3 | RNVC: 2

2 Nov 2000

5340-33-002-9595
Butt Hinge

330029595
6317430251: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-206-1847
Mechanical Stop

332061847
CBD58505P04: RNCC: 3 | RNVC: 2

20 Sep 2007

5340-33-161-2684
Mounting Bracket

331612684
311433: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-33-155-7718
Angle Bracket

331557718
317964: RNCC: 3 | RNVC: 2
317964: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-206-2016
Mounting Bracket

332062016
CBD58505G67: RNCC: 3 | RNVC: 2

24 Sep 2007

5340-33-004-4381
Rod End Connector

330044381
87.19.02.CT.58: RNCC: 3 | RNVC: 2

26 Mar 1999

5340-33-002-0546
Mounting Plate

330020546
C-20030-2/2-I-03-18: RNCC: 3 | RNVC: 2

7 Aug 1992

5340-33-157-7845
Angle Bracket

331577845
630105: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-180-5560
Access Cover

331805560
139891: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-161-2682
Mounting Bracket

331612682
311418: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-33-204-1472
Mounting Bracket

332041472
2540901469: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-33-203-9496
Mounting Bracket

332039496
20830091: RNCC: 3 | RNVC: 2
33R288318: RNCC: 5 | RNVC: 1

27 Jan 2005

5340-33-203-9515
Access Cover

332039515
20880759: RNCC: 3 | RNVC: 2
33R277118: RNCC: 5 | RNVC: 1

27 Jan 2005

5340-33-155-5226
Access Cover

331555226
683813: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-004-6433
Bumper

330046433
2820428: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-204-4709
Catch Strike

332044709
0850581020100: RNCC: 3 | RNVC: 2

20 Sep 2005

5340-33-200-4430
Access Cover

332004430
WW 321 492: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-106-7274
Mechanical Stop

331067274
AM12010300: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-204-7269
Mounting Plate

332047269
40202650150: RNCC: 3 | RNVC: 2

21 Dec 2005

5340-33-188-9843
Compression Cup

331889843
3 170 294: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-3226
Mounting Plate

332003226
50.42.010.A: RNCC: 3 | RNVC: 2

17 Dec 2001

5340-33-155-6390
Loop Clamp

331556390
3090224849: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-002-2699
Angle Bracket

330022699
7741.01B: RNCC: 3 | RNVC: 2

7 Jun 1994

5340-33-108-3916
Access Cover

331083916
8793 083-101: RNCC: 3 | RNVC: 2

28 Feb 2001

5340-33-205-5664
Access Cover

332055664
MAM-HE-15-00-06: RNCC: 3 | RNVC: 2

19 Dec 2006

5340-33-200-1600
Loop Clamp

332001600
JN264F40: RNCC: 2 | RNVC: 2

25 Oct 2001

5340-33-201-8180
Cushioning Pad

332018180
1005006020: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-204-4083
Access Cover

332044083
500.021.00: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-160-3219
Retaining Strap

331603219
116754031: RNCC: 3 | RNVC: 9

21 Sep 1995

5340-33-106-5543
Mounting Bracket

331065543
34649: RNCC: 3 | RNVC: 2

3 Jul 1998

5340-33-115-8180
Access Cover

331158180
92130313008: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-155-8988
Mending Plate

331558988
649849: RNCC: 3 | RNVC: 2
649849: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-201-4772
Access Cover

332014772
J52464020-404: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-205-4133
Access Cover

332054133
5040292: RNCC: 3 | RNVC: 2
1.143.92.057: RNCC: 5 | RNVC: 2

15 Sep 2006

5340-33-200-6113
Access Cover

332006113
10074: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-106-9400
Webbing Strap

331069400
7356.252.0703: RNCC: 3 | RNVC: 2
2510011175: RNCC: 5 | RNVC: 2

7 Apr 1999

5340-33-161-5025
Mending Plate

331615025
312850: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-33-001-6230
Compression Cup

330016230
VSH-8X1: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-001-5179
Access Cover

330015179
92030239: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-157-7370
Access Cover

331577370
508987: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3482
Mounting Bracket

330013482
92014821: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-004-5241
Access Cover

330045241
744820: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-205-0068
Retaining Strap

332050068
32371-13E00: RNCC: 3 | RNVC: 2

30 Mar 2006

5340-33-201-9511
Access Cover

332019511
223551344-01: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-33-180-8134
Synchro Clamp

331808134
577898: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-106-9404
Mounting Plate

331069404
190777: RNCC: 3 | RNVC: 2

7 Apr 1999

5340-33-157-8121
Angle Bracket

331578121
733719: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-0624
Mounting Bracket

330010624
35-46272-0104: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-6653
Catch Strike

330016653
35-22040-3901: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-155-7520
Mending Plate

331557520
731638: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-200-9681
Mending Plate

332009681
1005005313: RNCC: 3 | RNVC: 2
1005005313: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-003-0569
Bumper

330030569
7702163617: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-189-2152
Access Cover

331892152
01090012: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-204-4082
Mounting Bracket

332044082
500.020.00: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-200-8081
Mounting Plate

332008081
7060.252.0039: RNCC: 3 | RNVC: 2

13 Mar 2002

5340-33-192-3782
Retaining Strap

331923782
641.250: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-154-0206
Bow Handle

331540206
900061: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-201-5275
Mounting Plate

332015275
0640.120.0184: RNCC: 3 | RNVC: 2
2510005127: RNCC: 5 | RNVC: 2
2510005127: RNCC: 5 | RNVC: 2

22 Aug 2002

5340-33-160-7468
Retaining Clip

331607468
79.03.078.003: RNCC: 3 | RNVC: 2

28 Nov 1995

5340-33-001-5524
Angle Bracket

330015524
92041213: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-001-3411
Compression Cup

330013411
92014643: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-000-7044
Loop Clamp

330007044
3090223449: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-156-2356
Angle Bracket

331562356
-95853-G9600: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-200-9130
Mounting Plate

332009130
709031105: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-33-114-5071
Mounting Bracket

331145071
5TG 2-143: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-106-9453
Loop Clamp

331069453
4730002541: RNCC: 3 | RNVC: 2
420812-3: RNCC: 3 | RNVC: 2
4730-002541: RNCC: 5 | RNVC: 2
SP07520: RNCC: 5 | RNVC: 2

18 May 1999

5340-33-201-6513
Mending Plate

332016513
1025-900827: RNCC: 3 | RNVC: 2

23 Sep 2002

5340-33-156-5046
Loop Clamp

331565046
-17527-H8900: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-1182
Loop Clamp

332041182
FEZ 80701: RNCC: 3 | RNVC: 2
36990-85C01: RNCC: 5 | RNVC: 2

31 Mar 2005

5340-33-158-4192
Rod End Clevis

331584192
150005: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-4757
Mending Plate

330044757
717719: RNCC: 3 | RNVC: 2

2 Jun 1999

5340-33-202-2071
Angle Bracket

332022071
NN60724P01: RNCC: 3 | RNVC: 2

25 Feb 2003

5340-33-202-6591
Mounting Plate

332026591
9673.250.0720: RNCC: 3 | RNVC: 2
2510900724: RNCC: 5 | RNVC: 2
2510900724: RNCC: 5 | RNVC: 2

23 Sep 2003

5340-33-003-6336
Friction Catch Stud

330036336
0134619: RNCC: 3 | RNVC: 2

26 May 1998

5340-33-126-0636
Loop Clamp

331260636
0116-10: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-33-154-5677
Mending Plate

331545677
319982: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-001-4767
Angle Bracket

330014767
92026796: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-192-3783
Retaining Strap

331923783
641.315: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-189-1941
Door Closer

331891941
02072001: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-156-2195
Angle Bracket

331562195
-62200-G970X: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-003-4311
Bow Handle

330034311
159-737: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-160-0650
Buckle

331600650
00.213.472.14: RNCC: 3 | RNVC: 2

23 Nov 1995

5340-33-157-7378
Access Cover

331577378
510270: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-9584
Cushioning Pad

332029584
723552720-01: RNCC: 3 | RNVC: 2

15 Dec 2003

5340-33-102-2487
Handle Grip

331022487
1005-001754: RNCC: 3 | RNVC: 2

15 Jan 1991

5340-33-201-4098
Angle Bracket

332014098
A2811612-401: RNCC: 3 | RNVC: 2

9 Jul 2002

5340-33-202-6685
Mounting Plate

332026685
9673.250.0349: RNCC: 3 | RNVC: 2
1005900402: RNCC: 5 | RNVC: 2
1005900402: RNCC: 5 | RNVC: 2

24 Sep 2003

5340-33-004-8526
Support Hook

330048526
SP08807: RNCC: 3 | RNVC: 2

14 Dec 1999

5340-33-116-5292
Detent Plunger

331165292
4028605: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-1517
Mounting Bracket

330011517
35-56159-0008: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-0047
Mounting Bracket

330010047
35-32344-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-102-3164
Permanent Magnet

331023164
65: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-33-000-7066
Retaining Band

330007066
690376: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-202-0485
Mounting Bracket

332020485
1025-900881: RNCC: 3 | RNVC: 2

2 Jan 2003

5340-33-204-3105
Mounting Plate

332043105
706150003: RNCC: 3 | RNVC: 2

30 Jun 2005

Load More Results