What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 22 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 22 of 39

5340-33-115-8151
Access Cover

331158151
92130328003: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-145-5664
Mounting Bracket

331455664
80-132: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-190-3561
Metal Grille

331903561
5-26002: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-200-3645
Loop Clamp

332003645
C 4163 151 Q: RNCC: 3 | RNVC: 2

21 Jan 2002

5340-33-205-2972
Loop Clamp

332052972
51203-29F00: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-33-211-5153
Webbing Strap

332115153
1223136: RNCC: 3 | RNVC: 2

23 Nov 2013

5340-33-201-2189
Utility Access Door

332012189
A2810493-002: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-205-0069
Retaining Strap

332050069
32371-14D01: RNCC: 3 | RNVC: 2

30 Mar 2006

5340-33-115-8141
Access Cover

331158141
92095204910: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-102-1856
Mounting Bracket

331021856
52530000281: RNCC: 3 | RNVC: 2
MCL-5-28: RNCC: 3 | RNVC: 2
52530000281: RNCC: 3 | RNVC: 2
MCL-5-28: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-103-5292
Ball Socket Seat

331035292
9505-1-2-15: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-205-8524
Mounting Bracket

332058524
2918-401: RNCC: 3 | RNVC: 2

20 Apr 2007

5340-33-200-8581
Plain Solid Disk

332008581
7054.252.0167: RNCC: 3 | RNVC: 2
2510700854: RNCC: 5 | RNVC: 2

5 Apr 2002

5340-33-003-4303
Access Door Hinge

330034303
159-436: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-211-5147
Butt Hinge

332115147
1222284: RNCC: 3 | RNVC: 2

23 Nov 2013

5340-33-106-4582
Angle Bracket

331064582
5340000642: RNCC: 3 | RNVC: 2

13 Feb 1998

5340-33-201-4214
Angle Bracket

332014214
A2811822-401: RNCC: 3 | RNVC: 2

10 Jul 2002

5340-33-126-4352
Mounting Bracket

331264352
S22711-N1000-W1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-126-9209
Doorknob

331269209
25401058-3: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-154-8161
Retaining Strap

331548161
V-37505: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-200-3920
Access Cover

332003920
CF 485 192: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-203-4311
Mounting Plate

332034311
44P31098-03-03 DCHA: RNCC: 3 | RNVC: 2

2 Apr 2004

5340-33-003-4104
Retaining Strap

330034104
11.40886-0017: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-004-9614
Bridge Clamp

330049614
221407311: RNCC: 3 | RNVC: 2
EN221407-311: RNCC: 5 | RNVC: 9

17 Apr 2000

5340-33-202-8906
Angle Bracket

332028906
MHC1121531: RNCC: 3 | RNVC: 2

25 Nov 2003

5340-33-000-9637
Angle Bracket

330009637
35-11658-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-205-0113
Mounting Plate

332050113
19625201: RNCC: 3 | RNVC: 2

30 Mar 2006

5340-33-211-3022
Mounting Bracket

332113022
02.07.02.12: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-33-102-2049
Extension Handle

331022049
MANGO DE CEPILLO 27X1200MM.: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-33-000-6693
Retaining Strap

330006693
630052: RNCC: 1 | RNVC: 2

7 Sep 1988

5340-33-200-3985
Mounting Plate

332003985
CF 826 052 AE: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-000-1055
Mending Plate

330001055
6.302.0.978.005.4: RNCC: 1 | RNVC: 2

27 Jun 1986

5340-33-107-6377
Lock Bolt

331076377
958.000.028: RNCC: 3 | RNVC: 2

17 Mar 2000

5340-33-003-1094
Door Holder

330031094
90811-G9500: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-204-4281
Threaded Rod End

332044281
W280698422003: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-004-8936
Rod End Clevis

330048936
4068204038: RNCC: 3 | RNVC: 2

27 Jan 2000

5340-33-157-7701
Access Cover

331577701
573861: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-0495
Handle Grip

332030495
5340-900067: RNCC: 3 | RNVC: 2

23 Jan 2004

5340-33-157-7914
Angle Bracket

331577914
640215: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-7771
Angle Bracket

331557771
311715: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-203-5730
Padlock

332035730
30906134: RNCC: 3 | RNVC: 2

27 May 2004

5340-33-116-5536
Access Cover

331165536
28410-896-000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-189-1863
Mounting Bracket

331891863
02280030: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-189-2266
Mounting Bracket

331892266
01040153: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-4234
Mounting Plate

332014234
A2812310-401: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-33-126-5807
Mounting Bracket

331265807
C22136-A1000-C57: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-1363
Mounting Bracket

330011363
35-53240-1601: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-0693
Mounting Bracket

330010693
35-46343-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-6818
Retaining Strap

330016818
D57026-00: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-201-2287
Metal Grille

332012287
2736.02.41: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-108-4422
Mounting Plate

331084422
9644.250.5282: RNCC: 3 | RNVC: 2
2540000809: RNCC: 5 | RNVC: 2
2540000809: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-106-0743
Retaining Strap

331060743
13.775: RNCC: 3 | RNVC: 2

13 Feb 1997

5340-33-154-6483
Loop Clamp

331546483
194110: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-33-190-3501
Mending Plate

331903501
3-59060: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-154-0446
Expansion Plug

331540446
503602: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-102-0875
Mounting Bracket

331020875
C-3-5: RNCC: 3 | RNVC: 2

7 Jan 1991

5340-33-180-7019
Expansion Plug

331807019
250830: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-000-0588
Rim Latch Set

330000588
9.325.1.977.001.4: RNCC: 1 | RNVC: 2

13 Mar 1997

5340-33-205-2958
Bridge Clamp

332052958
09404-08205: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-33-103-2261
Mounting Bracket

331032261
1055-000157: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-0144
Detent Plunger

330000144
1005000203: RNCC: 1 | RNVC: 2
1005-000203: RNCC: 3 | RNVC: 2

15 Jul 1985

5340-33-000-1739
Leather Strap

330001739
1005001197: RNCC: 1 | RNVC: 2
1005-001197: RNCC: 3 | RNVC: 2

1 Dec 1986

5340-33-201-5263
Webbing Strap

332015263
1005006520: RNCC: 3 | RNVC: 2

22 Aug 2002

5340-33-200-9902
Access Cover

332009902
2510901160: RNCC: 3 | RNVC: 2
2510901160: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-180-5539
Butt Hinge

331805539
138295: RNCC: 3 | RNVC: 2
138295: RNCC: 6 | RNVC: 9

20 Jul 1995

5340-33-116-0634
Bridge Clamp

331160634
BA-18148000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-0533
Access Cover

331160533
LB-18292050: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-1746
Retaining Strap

331031746
1005-004550: RNCC: 3 | RNVC: 2
3235: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-115-8469
Angle Bracket

331158469
H8/225/PH/1/4: RNCC: 3 | RNVC: 2

18 Sep 1992

5340-33-126-2298
Angle Bracket

331262298
H11930/2/33: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-33-201-6030
Mounting Plate

332016030
2510900069: RNCC: 3 | RNVC: 2

5 Sep 2002

5340-33-104-7912
Loop Clamp

331047912
W290622593000: RNCC: 3 | RNVC: 2

26 Sep 1995

5340-33-000-7485
Angle Bracket

330007485
568950: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-201-9713
Access Cover

332019713
204900393: RNCC: 3 | RNVC: 2
204900393: RNCC: 5 | RNVC: 2

29 Nov 2002

5340-33-206-2869
Section Block Clamp

332062869
200763632: RNCC: 3 | RNVC: 2

24 Oct 2007

5340-33-103-1570
Mounting Bracket

331031570
1005-004208: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-0994
Mounting Bracket

330010994
35-46688-0006: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-187-2155
Mending Plate

331872155
DN-139914: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-4216
Angle Bracket

332014216
A2811853-001: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-33-001-0891
Mounting Bracket

330010891
35-46585-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-1181
Mounting Bracket

330011181
35-49124-0002: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-206-2688
Mounting Bracket

332062688
PCMSABMR107: RNCC: 3 | RNVC: 2

18 Oct 2007

5340-33-204-6260
Mounting Bracket

332046260
5034292: RNCC: 3 | RNVC: 2

8 Nov 2005

5340-33-116-5529
Access Cover

331165529
19610-ZE2-810: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-0012
Mounting Bracket

330020012
35-71166-0001: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-103-2504
Retaining Strap

331032504
2590-000084: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-3540
Mounting Plate

332033540
CS-EF2-AG1041001: RNCC: 3 | RNVC: 2

5 Mar 2004

5340-33-145-6441
Bridge Clamp

331456441
TAB. E4-25: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-4014
Mounting Plate

332054014
5039835: RNCC: 3 | RNVC: 2
1.143.60.912: RNCC: 5 | RNVC: 2

14 Sep 2006

5340-33-154-9819
Mounting Bracket

331549819
22106.00.4: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-001-0645
Mounting Bracket

330010645
35-46287-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-126-5775
Rod End Connector

331265775
G59303-R-0980: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-6689
Handle Grip

331616689
975-A-22: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-102-5918
Mounting Plate

331025918
9358-03-05: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-7677
Leather Strap

331067677
TAHALI: RNCC: 3 | RNVC: 2
PCAMI/VE/V10B05A/97 TAHALI: RNCC: 4 | RNVC: 1

15 Mar 1999

5340-33-116-3910
Mounting Bracket

331163910
TO-21: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-1598
Mounting Bracket

332111598
INS030231006000000: RNCC: 3 | RNVC: 2

1 Jul 2013

5340-33-116-0343
Mending Plate

331160343
OB-17181000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-5516
Access Cover

331165516
19610-ZE0-000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-3819
Rod End Clevis

330033819
TAN16726-10A: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-33-116-6264
Access Cover

331166264
15 G-38: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-2549
Rod End Clevis

332052549
35-23317-0211: RNCC: 3 | RNVC: 2

6 Jul 2006

5340-33-181-1414
Retaining Strap

331811414
-01552-00341: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-116-5526
Access Cover

331165526
12310-ZE2-810: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-1741
Mounting Bracket

330011741
35-61394-0002: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-190-3950
Mounting Bracket

331903950
1816: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-211-1180
Webbing Strap

332111180
0229290: RNCC: 3 | RNVC: 2

16 Jun 2013

5340-33-211-2064
Bumper

332112064
212-83229-08-1: RNCC: 3 | RNVC: 2

8 Jul 2013

5340-33-103-1469
Access Cover

331031469
1005-004382: RNCC: 3 | RNVC: 2
2519: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-155-0426
Mounting Bracket

331550426
A1204: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-154-8364
Access Cover

331548364
9045.63: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-000-7041
Loop Clamp

330007041
3090217549: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-208-0796
Utility Resilient Mount

332080796
135805: RNCC: 3 | RNVC: 2
BRT70A45M6: RNCC: 5 | RNVC: 2

12 Feb 2010

5340-33-201-7700
Latch Bar

332017700
7055.252.0049: RNCC: 3 | RNVC: 2
2510701486: RNCC: 5 | RNVC: 2

22 Oct 2002

5340-33-105-0481
Mechanical Stop

331050481
REM-25-2-2-3: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-200-3533
Mounting Bracket

332003533
CF 209 013 E: RNCC: 3 | RNVC: 2

14 Jan 2002

5340-33-206-4006
Handwheel

332064006
XX-000019007600: RNCC: 3 | RNVC: 2
000019007600: RNCC: 5 | RNVC: 2

19 Dec 2007

5340-33-203-9410
Lock-Release Lever

332039410
PS-910118: RNCC: 3 | RNVC: 2

25 Jan 2005

5340-33-004-5215
Access Cover

330045215
77.00.589.243: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-107-1869
Access Door Hinge

331071869
737763: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-107-9971
Mounting Bracket

331079971
9644.250.2210: RNCC: 3 | RNVC: 2
1005006144: RNCC: 5 | RNVC: 2
1005006144: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-108-5353
Mounting Bracket

331085353
9644.250.2060: RNCC: 3 | RNVC: 2
2510008619: RNCC: 5 | RNVC: 2
2510008619: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-154-3832
Access Cover

331543832
577731: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-202-0313
Mounting Bracket

332020313
1025-901698: RNCC: 3 | RNVC: 2

19 Dec 2002

5340-33-203-9135
Mounting Bracket

332039135
2510011226: RNCC: 3 | RNVC: 2
7356.252.0777: RNCC: 5 | RNVC: 2

11 Jan 2005

5340-33-107-3089
Mounting Plate

331073089
21124816500: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-003-5075
Plug Button

330035075
7903074011: RNCC: 3 | RNVC: 2
7903074011: RNCC: 5 | RNVC: 2

13 Nov 1997

5340-33-203-2247
Caster Frame

332032247
067.G.01.02.01: RNCC: 3 | RNVC: 2

17 Feb 2004

5340-33-001-1087
Mounting Bracket

330011087
35-46783-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-107-1311
Mounting Plate

331071311
610602229: RNCC: 3 | RNVC: 2
PCAMI/RP/0310602229: RNCC: 6 | RNVC: 9

30 Jun 1999

5340-33-155-9178
Mounting Bracket

331559178
313138: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-154-5532
Retaining Strap

331545532
322049: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-106-5830
Mending Plate

331065830
CF 328 121: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-33-106-8366
Mounting Bracket

331068366
W290375201400: RNCC: 3 | RNVC: 2

5 Apr 1999

5340-33-181-1157
Retaining Strap

331811157
-24220-31W00: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-115-5589
Access Hole Frame

331155589
H8/225/PH/46/1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-0123
Mounting Plate

332050123
19655100: RNCC: 3 | RNVC: 2

30 Mar 2006

5340-33-107-6440
Mounting Plate

331076440
7356.252.0844: RNCC: 3 | RNVC: 2
2510700210: RNCC: 5 | RNVC: 2

17 Apr 2000

5340-33-201-8217
Webbing Strap

332018217
2590900123: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-190-3252
Retaining Clip

331903252
S4-C: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-157-0156
Access Cover

331570156
-23337-H5000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-5216
Access Cover

331555216
682920: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-161-2696
Access Cover

331612696
2930000250: RNCC: 3 | RNVC: 2
318917: RNCC: 3 | RNVC: 2

27 Apr 1995

5340-33-160-3018
Access Cover

331603018
102517114: RNCC: 3 | RNVC: 9

11 Jul 1995

5340-33-104-0030
Mounting Plate

331040030
900989: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-33-157-0194
Access Cover

331570194
-73800035-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-0653
Access Cover

330000653
9.302.1.972.004.5: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-005-1358
Loop Clamp

330051358
ADP8-1-10-010: RNCC: 3 | RNVC: 2

19 Sep 2000

5340-33-108-4899
Mounting Bracket

331084899
4232001050: RNCC: 3 | RNVC: 2
VB-400-C-2400: RNCC: 5 | RNVC: 2

26 Mar 2001

5340-33-201-4231
Mounting Plate

332014231
A2810436-402: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-33-001-7740
Access Cover

330017740
4060-PG-16: RNCC: 3 | RNVC: 2

28 Jan 1991

5340-33-154-2214
Mending Plate

331542214
512475: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-001-1221
Mounting Bracket

330011221
35-49300-0901: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-107-1947
Hinged Hasp

331071947
883288: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-104-8090
Loop Clamp

331048090
3090201811: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-8944
Block Clamp

330048944
NN58365P01: RNCC: 3 | RNVC: 2

28 Jan 2000

5340-33-107-3758
Support Hook

331073758
0431.001: RNCC: 3 | RNVC: 2

4 Oct 1999

5340-33-187-3059
Access Cover

331873059
540458: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-1186
Mounting Bracket

331031186
375.093.3120: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-209-4394
Utility Guard Rail Section

332094394
0662.10.3002.00: RNCC: 3 | RNVC: 2

20 Dec 2011

5340-33-001-3869
Bumper

330013869
92020246: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-161-3795
Mounting Bracket

331613795
630051: RNCC: 3 | RNVC: 2

31 Jul 1995

5340-33-115-8531
Access Cover

331158531
H8/225/PH/6/2: RNCC: 3 | RNVC: 2

18 Sep 1992

5340-33-001-1233
Mounting Bracket

330011233
35-49932-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-201-4775
Access Cover

332014775
J52464021-003: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-116-0905
Mounting Bracket

331160905
HB-18134000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3232
Retaining Strap

330013232
92011027: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-107-5668
Mounting Bracket

331075668
523-832.00: RNCC: 3 | RNVC: 2

27 Jan 2000

5340-33-160-5688
Loop Clamp

331605688
79.03.083.195: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-6247
Stand Base

332046247
27504300: RNCC: 3 | RNVC: 2
BASE DESERTICO: RNCC: 5 | RNVC: 2

8 Nov 2005

5340-33-204-0225
Mending Plate

332040225
35-32242-0001: RNCC: 3 | RNVC: 2

3 Feb 2005

5340-33-103-2377
Retaining Strap

331032377
4730-000305: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-2767
Thumb Latch

332002767
100433020001: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-33-106-8876
Mounting Bracket

331068876
317696: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-108-1850
Mounting Bracket

331081850
615657: RNCC: 3 | RNVC: 2
615657: RNCC: 5 | RNVC: 2

29 Jan 2001

5340-33-200-8908
Mounting Plate

332008908
W290698605000: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-33-108-4325
Mounting Plate

331084325
9644.591.5660: RNCC: 3 | RNVC: 2
2510011083: RNCC: 5 | RNVC: 2
2510011083: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-204-3990
Turnbuckle

332043990
40-1-GANCHO-CANCAMO: RNCC: 3 | RNVC: 2
BS-33P024625: RNCC: 5 | RNVC: 2
4030-33-P02-4625: RNCC: 6 | RNVC: 9

8 Sep 2005

5340-33-001-0691
Rod End Clevis

330010691
35-46341-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-3692
Compression Cup

330013692
92019228: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-181-5598
Mounting Plate

331815598
-01200424: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-107-1358
Access Cover

331071358
612301201: RNCC: 3 | RNVC: 2
PCAMI/RP/0361230121: RNCC: 6 | RNVC: 9

30 Jun 1999

5340-33-202-0264
Retaining Band

332020264
NM-C-2921 M-BMET60: RNCC: 2 | RNVC: 1
PT-TZO60-230702: RNCC: 2 | RNVC: 1
B-400-2-17: RNCC: 3 | RNVC: 2
4240-33-P42-2724: RNCC: 6 | RNVC: 9

17 Dec 2002

5340-33-202-6593
Mounting Plate

332026593
9673.250.0198: RNCC: 3 | RNVC: 2
2510900726: RNCC: 5 | RNVC: 2
2510900726: RNCC: 5 | RNVC: 2

23 Sep 2003

5340-33-205-2691
Pawl Fastener

332052691
CBD50509G02: RNCC: 3 | RNVC: 2

12 Jul 2006

5340-33-004-8860
Angle Bracket

330048860
7700764657: RNCC: 3 | RNVC: 2

27 Jan 2000

5340-33-108-2255
Access Cover

331082255
9644.101.0460: RNCC: 3 | RNVC: 2
1005006569: RNCC: 5 | RNVC: 2
1005006569: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-206-1310
Mounting Plate

332061310
PCMSABMR075: RNCC: 3 | RNVC: 2

30 Aug 2007

5340-33-002-1588
Mending Plate

330021588
921.403.02: RNCC: 3 | RNVC: 2

1 Jul 1993

5340-33-107-4383
Loop Clamp

331074383
275199: RNCC: 3 | RNVC: 2
275199: RNCC: 6 | RNVC: 9

14 Oct 1999

5340-33-002-0936
Door Handle

330020936
311839: RNCC: 3 | RNVC: 2
311839: RNCC: 3 | RNVC: 2

3 Feb 1993

5340-33-001-1176
Mounting Bracket

330011176
35-49119-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-0620
Mounting Bracket

330010620
35-46270-0004: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-202-9981
Angle Bracket

332029981
MHC1121510: RNCC: 3 | RNVC: 2

19 Dec 2003

5340-33-155-6284
Access Cover

331556284
900260: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-154-6668
Access Cover

331546668
741135: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-107-1532
Bumper

331071532
PCAMI/RP/0600000012: RNCC: 3 | RNVC: 2

1 Jul 1999

5340-33-000-1688
Detent Plunger

330001688
1005-001133: RNCC: 3 | RNVC: 2
WK-W 9033.050203: RNCC: 5 | RNVC: 2

13 Mar 1997

5340-33-001-1167
Rod End Clevis

330011167
35-49113-0501: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-155-7698
Angle Bracket

331557698
698361: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-203-6534
Mounting Plate

332036534
CBD50523P02: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-33-126-4732
Access Cover

331264732
2690.42: RNCC: 3 | RNVC: 2

3 Nov 1992

5340-33-161-3345
Access Cover

331613345
542218: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-156-2348
Angle Bracket

331562348
-21541-G3600: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-155-6403
Angle Bracket

331556403
757889: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-116-8296
Bridge Clamp

331168296
22 521: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-203-2688
Access Cover

332032688
9673.250.7360: RNCC: 3 | RNVC: 2
2540900952: RNCC: 5 | RNVC: 2
2540900952: RNCC: 5 | RNVC: 2

19 Feb 2004

5340-33-001-9012
Padlock

330019012
20050-AAC4: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-200-1881
Retaining Band

332001881
J57461725-002: RNCC: 3 | RNVC: 2

30 Oct 2001

5340-33-200-8907
Loop Clamp

332008907
W290698604600: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-33-155-9019
Access Cover

331559019
631980: RNCC: 3 | RNVC: 2
631980: RNCC: 5 | RNVC: 9

4 Jan 1991

5340-33-200-3278
Access Cover

332003278
223571525-01: RNCC: 3 | RNVC: 2
223571525-01: RNCC: 5 | RNVC: 2

18 Dec 2001

5340-33-106-9990
Mechanical Stop

331069990
-80520-G2500: RNCC: 3 | RNVC: 2

25 May 1999

5340-33-155-7550
Mending Plate

331557550
638272: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-000-7511
Angle Bracket

330007511
815655: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-211-5085
Access Cover

332115085
0240673: RNCC: 3 | RNVC: 2

23 Nov 2013

5340-33-187-4978
Strap Hinge

331874978
204447: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-108-4215
Mounting Bracket

331084215
9644.250.2750: RNCC: 3 | RNVC: 2
1005900072: RNCC: 5 | RNVC: 2
1005900072: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-154-0659
Access Cover

331540659
558220: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-155-8415
Access Cover

331558415
8380101126: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-33-108-3319
Webbing Strap

331083319
SP07259: RNCC: 3 | RNVC: 2

13 Feb 2001

5340-33-001-6410
Mounting Bracket

330016410
D58775-00: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-103-2453
Mounting Bracket

331032453
1055-000383: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-126-4088
Angle Bracket

331264088
F50035-V22-N12: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-145-5908
Mounting Plate

331455908
TAB. D9-27: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-6113
Expansion Plug

331066113
120539: RNCC: 3 | RNVC: 2

14 Sep 1998

5340-33-116-6143
Mending Plate

331166143
15 D-80 A: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-187-5540
Loop Clamp

331875540
0201602-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-9101
Access Cover

330019101
20050-7311: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-107-1867
Access Door Hinge

331071867
0176220: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-145-6307
Angle Bracket

331456307
010259: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-2678
Thumb Latch

332002678
100402070400: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-33-201-7307
Loop Clamp

332017307
EN4114V06NH1: RNCC: 2 | RNVC: 2

15 Oct 2002

5340-33-004-5914
Extension Handle

330045914
287107G: RNCC: 3 | RNVC: 2

2 Jul 1999

5340-33-155-7503
Mending Plate

331557503
765962: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-000-6940
Loop Clamp

330006940
553413: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-201-8271
Mounting Plate

332018271
9644.121.0093: RNCC: 3 | RNVC: 2
2510010743: RNCC: 5 | RNVC: 2
2510010743: RNCC: 5 | RNVC: 2

28 Oct 2002

5340-33-108-2514
Mounting Bracket

331082514
9644.121.0018: RNCC: 3 | RNVC: 2
2510009104: RNCC: 5 | RNVC: 2
2510009104: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-001-4526
Retaining Strap

330014526
92026458: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-126-5759
Rod End Connector

331265759
G38212-E-0700: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-0906
Mounting Plate

332060906
69472 10H01: RNCC: 3 | RNVC: 2
69472-10H01: RNCC: 5 | RNVC: 2

1 Aug 2007

5340-33-200-1985
Retaining Band

332001985
J57166531-002: RNCC: 3 | RNVC: 2

2 Nov 2001

5340-33-160-3817
Flush Lock

331603817
95.611.433: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-115-8156
Access Cover

331158156
92130313002: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-001-0089
Mounting Bracket

330010089
35-34051-0103: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-158-2215
Retaining Clip

331582215
0216503-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-6465
Angle Bracket

331546465
735956: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-107-4434
Mounting Plate

331074434
W290683602100: RNCC: 3 | RNVC: 2

13 Oct 1999

5340-33-108-4883
Rim Latch

331084883
30-521: RNCC: 3 | RNVC: 2
5340000808: RNCC: 5 | RNVC: 2

23 Mar 2001

5340-33-001-1183
Mounting Bracket

330011183
35-49126-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-201-2432
Threaded Rod End

332012432
113-0958-04: RNCC: 3 | RNVC: 2

11 Jun 2002

5340-33-205-4401
Clamping Catch

332054401
5040021: RNCC: 3 | RNVC: 2
1.143.31.055: RNCC: 5 | RNVC: 2

28 Sep 2006

5340-33-102-5758
Mounting Bracket

331025758
651-H: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-0309
Mounting Bracket

332010309
4910000011: RNCC: 3 | RNVC: 2
4910000011: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-106-8879
Mounting Bracket

331068879
317894: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-210-9614
Webbing Strap

332109614
L57TGGAZU000900: RNCC: 3 | RNVC: 2

21 Apr 2013

5340-33-160-3221
Retaining Strap

331603221
116752031: RNCC: 3 | RNVC: 9

27 Nov 1995

5340-33-003-4040
Access Cover

330034040
11.28944-1780: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-157-7709
Angle Bracket

331577709
576148: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-9967
Mounting Bracket

330009967
35-23371-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-002-7093
Plug Button

330027093
0001034: RNCC: 3 | RNVC: 2

26 Jul 1995

5340-33-203-3452
Bridge Clamp

332033452
CS-EF2-AG1040803: RNCC: 3 | RNVC: 2
CS-EF2-AG1040903: RNCC: 5 | RNVC: 2

3 Mar 2004

5340-33-001-6472
Loop Clamp

330016472
35-43511-0101-00: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-001-0619
Mounting Bracket

330010619
35-46270-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-116-3883
Mounting Bracket

331163883
GP-14646077: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-0762
Access Cover

331540762
510156: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-002-9597
Catch Strike

330029597
6317430303: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-005-1309
Retaining Band

330051309
114323611: RNCC: 3 | RNVC: 2

14 Sep 2000

5340-33-001-6469
Loop Clamp

330016469
D58117-00: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-202-9975
Mending Plate

332029975
MHC2150310: RNCC: 3 | RNVC: 2
MHC1150310: RNCC: 5 | RNVC: 2

19 Dec 2003

5340-33-004-9982
Access Cover

330049982
7700525087: RNCC: 3 | RNVC: 2

3 May 2000

5340-33-106-4266
Mounting Plate

331064266
139232: RNCC: 3 | RNVC: 2

5 Jan 1998

5340-33-154-2245
Mending Plate

331542245
762910: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-001-1507
Mounting Bracket

330011507
35-56156-0102: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-206-1401
Corner Brace

332061401
PS-401114: RNCC: 3 | RNVC: 2

3 Sep 2007

5340-33-116-7960
Loop Clamp

331167960
00.00512/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-145-6442
Loop Clamp

331456442
TAB. E4-27: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-8898
Retaining Clip

332048898
228031-1: RNCC: 3 | RNVC: 2
PS-210184: RNCC: 5 | RNVC: 2

20 Feb 2006

5340-33-115-9264
Retaining Strap

331159264
DSH-337: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-0845
Aircraft Latch Hook

332110845
CE200753-0001: RNCC: 3 | RNVC: 2

6 Jun 2013

5340-33-205-3663
Mounting Plate

332053663
5035170: RNCC: 3 | RNVC: 2
1.128.33.028: RNCC: 5 | RNVC: 2

28 Aug 2006

5340-33-155-6405
Angle Bracket

331556405
757482: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-107-4422
Mounting Plate

331074422
W290683641100: RNCC: 3 | RNVC: 2

13 Oct 1999

5340-33-201-3038
Butt Hinge

332013038
5340000975: RNCC: 3 | RNVC: 2
5340000975: RNCC: 5 | RNVC: 2

20 Jun 2002

5340-33-108-5815
Bumper

331085815
V3/40 A 4456: RNCC: 3 | RNVC: 2

27 Oct 1998

5340-33-205-7312
Mounting Bracket

332057312
212-46456-01-1: RNCC: 3 | RNVC: 2

5 Mar 2007

5340-33-202-8457
Bumper

332028457
89.28.67: RNCC: 3 | RNVC: 2

11 Nov 2003

5340-33-003-3549
Angle Bracket

330033549
11.12543-0268: RNCC: 3 | RNVC: 2

26 Jun 1997

5340-33-203-7973
Loop Clamp

332037973
10-43200-1501: RNCC: 3 | RNVC: 2

21 Oct 2004

5340-33-155-1696
Access Cover

331551696
22,30.21: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-33-201-3547
Catch Strike

332013547
92492914052: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-33-001-3917
Expansion Plug

330013917
92020325: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-205-0369
Mounting Plate

332050369
0224958: RNCC: 3 | RNVC: 2

17 Apr 2006

5340-33-209-2609
Buckle

332092609
APPTK19039: RNCC: 3 | RNVC: 2

16 Sep 2011

5340-33-202-0292
Mounting Bracket

332020292
1025-901641: RNCC: 3 | RNVC: 2

19 Dec 2002

5340-33-145-5631
Mounting Bracket

331455631
03-256: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-7195
Mounting Bracket

332017195
1025-901420: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-33-206-1580
Bumper

332061580
PS-912031: RNCC: 3 | RNVC: 2

10 Sep 2007

5340-33-116-8311
Mechanical Stop

331168311
M4T403-01-12: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-8642
Clamping Catch

332008642
7562.252.0258: RNCC: 3 | RNVC: 2

5 Apr 2002

5340-33-107-0081
Mounting Bracket

331070081
-24430-Y9502: RNCC: 3 | RNVC: 2

25 May 1999

5340-33-201-4010
Angle Bracket

332014010
A2810483-401: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-206-1313
Mounting Plate

332061313
PCMSABMR078: RNCC: 3 | RNVC: 2

30 Aug 2007

5340-33-203-5729
Utility Access Door

332035729
30903133: RNCC: 3 | RNVC: 2

27 May 2004

5340-33-204-6736
Support Hook

332046736
AGB115025C3D: RNCC: 3 | RNVC: 2

29 Nov 2005

5340-33-155-7712
Angle Bracket

331557712
690783: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-105-9600
Mounting Plate

331059600
16148072011: RNCC: 3 | RNVC: 2

20 Sep 1996

5340-33-210-2675
Access Cover

332102675
205200207: RNCC: 3 | RNVC: 2
205200207: RNCC: 5 | RNVC: 2

11 Jul 2012

5340-33-206-2687
Mounting Bracket

332062687
PCMSABMR106: RNCC: 3 | RNVC: 2

18 Oct 2007

5340-33-154-6556
Loop Clamp

331546556
838815: RNCC: 3 | RNVC: 2
838815: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-003-4400
Leather Strap

330034400
SP-00442: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-000-7497
Angle Bracket

330007497
696064: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-200-7469
Mounting Bracket

332007469
7053.252.0153: RNCC: 3 | RNVC: 2
2510700406: RNCC: 5 | RNVC: 2

6 Mar 2002

5340-33-201-8188
Utility Access Door

332018188
2510010238: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-116-7513
Mending Plate

331167513
3064611712: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-6315
Loop Clamp

330006315
788579: RNCC: 1 | RNVC: 2

14 Jun 1988

5340-33-203-7995
Rod End Connector

332037995
10-21001-5201: RNCC: 3 | RNVC: 2

22 Oct 2004

5340-33-200-8661
Bow Handle

332008661
7562.252.0273: RNCC: 3 | RNVC: 2

5 Apr 2002

5340-33-205-2956
Bridge Clamp

332052956
09404-08420: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-33-003-4150
Mounting Plate

330034150
11.43286-0454: RNCC: 3 | RNVC: 2
11.43286-0454: RNCC: 5 | RNVC: 2

27 Aug 1997

5340-33-103-2248
Mounting Bracket

331032248
1055-000108: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-2456
Mounting Bracket

332112456
50-485-2406A: RNCC: 3 | RNVC: 2

25 Jul 2013

5340-33-154-0468
Expansion Plug

331540468
3340804249: RNCC: 3 | RNVC: 2

29 Jan 1990

5340-33-201-2583
Key Blank

332012583
15-327-3L/1: RNCC: 3 | RNVC: 2

11 Jun 2002

5340-33-004-4428
Bow Handle

330044428
709033504: RNCC: 3 | RNVC: 2

31 Mar 1999

5340-33-155-1883
Doorstop

331551883
A03: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-108-2652
Mounting Bracket

331082652
9644.121.0410: RNCC: 3 | RNVC: 2
2510010696: RNCC: 5 | RNVC: 2
2510010696: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-108-4966
Thumb Latch

331084966
99.08.87: RNCC: 3 | RNVC: 2

26 Mar 2001

5340-33-126-1508
Loop Clamp

331261508
43823519: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-6224
Bumper

332046224
PS-210196: RNCC: 3 | RNVC: 2

7 Nov 2005

5340-33-107-1244
Doorknob

331071244
610103705: RNCC: 3 | RNVC: 2
PCAMI/RP/0361010375: RNCC: 6 | RNVC: 9

29 Jun 1999

5340-33-157-7880
Angle Bracket

331577880
633016: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-4509
Catch Strike

331084509
9644.251.6454: RNCC: 3 | RNVC: 2
2590900096: RNCC: 5 | RNVC: 2
2590900096: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-108-2730
Catch Strike

331082730
9644.251.6433: RNCC: 3 | RNVC: 2
2510901111: RNCC: 5 | RNVC: 2
2510901111: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-107-2773
Access Cover

331072773
994137: RNCC: 3 | RNVC: 2

21 Sep 1999

5340-33-203-2100
Bridge Clamp

332032100
2540901599: RNCC: 3 | RNVC: 2
2540901599: RNCC: 5 | RNVC: 2

16 Feb 2004

5340-33-002-9802
Door Handle

330029802
0134411: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-200-3488
Angle Bracket

332003488
880301052: RNCC: 3 | RNVC: 2

14 Jan 2002

5340-33-004-5182
Mounting Bracket

330045182
0353277: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-200-3001
Pawl Fastener

332003001
35-94243-0010: RNCC: 3 | RNVC: 2

10 Dec 2001

5340-33-106-4816
Retaining Bail

331064816
0170014: RNCC: 3 | RNVC: 2
ALMCTI-1000000170014: RNCC: 5 | RNVC: 1

6 Mar 1998

5340-33-200-5510
Mounting Plate

332005510
225001114: RNCC: 3 | RNVC: 2

4 Feb 2002

5340-33-154-6512
Loop Clamp

331546512
3090222049: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-180-7586
Loop Clamp

331807586
505205: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-115-8465
Angle Bracket

331158465
H8/225/PH/1/15: RNCC: 3 | RNVC: 2

18 Sep 1992

5340-33-204-1458
Mounting Bracket

332041458
2540901470: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-33-210-9669
Rod End Clevis

332109669
M361A1412206: RNCC: 3 | RNVC: 2

25 Apr 2013

5340-33-145-6308
Angle Bracket

331456308
010260: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-6720
Angle Bracket

332026720
5034131: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-33-205-6082
Loop Clamp

332056082
090-00171: RNCC: 3 | RNVC: 2

15 Jan 2007

5340-33-154-0459
Expansion Plug

331540459
810231: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-205-4607
Mounting Plate

332054607
1025901935: RNCC: 3 | RNVC: 2
9743.100.0118: RNCC: 5 | RNVC: 2

19 Oct 2006

5340-33-003-6684
Turnbuckle Body

330036684
1240000025: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-200-8584
Pipe Hanger

332008584
9644.251.5380: RNCC: 3 | RNVC: 2
2510009986: RNCC: 5 | RNVC: 2
2510009986: RNCC: 5 | RNVC: 2

5 Apr 2002

5340-33-004-2659
Access Cover

330042659
730096333: RNCC: 3 | RNVC: 2

12 Nov 1998

5340-33-202-0229
Mounting Bracket

332020229
223591711-01: RNCC: 3 | RNVC: 2

16 Dec 2002

5340-33-202-2088
Access Cover

332022088
098182806: RNCC: 3 | RNVC: 2

25 Feb 2003

5340-33-004-7632
Access Door Hinge

330047632
-01105990-0B: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-33-003-3409
Access Cover

330033409
801756: RNCC: 3 | RNVC: 2

24 Jun 1997

5340-33-107-6317
Mounting Bracket

331076317
323377: RNCC: 3 | RNVC: 2
323377: RNCC: 3 | RNVC: 2

3 May 2000

5340-33-156-5010
Loop Clamp

331565010
-79730-G970X: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-2186
Angle Bracket

331562186
-56102-G9500: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-107-6295
Strap Hinge

331076295
7060.252.0134: RNCC: 3 | RNVC: 2
2510700784: RNCC: 5 | RNVC: 2

18 May 2000

5340-33-001-4248
Access Cover

330014248
92026033: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-160-6205
Lever Bracket

331606205
75.488.562: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-7330
Access Cover

331067330
AM81030300: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-107-4595
Mounting Bracket

331074595
W290687400300: RNCC: 3 | RNVC: 2

15 Nov 1999

5340-33-154-6505
Loop Clamp

331546505
3090214149: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-105-1432
Mending Plate

331051432
240708: RNCC: 3 | RNVC: 2
240708: RNCC: 6 | RNVC: 9

6 Mar 1996

5340-33-105-5555
Angle Bracket

331055555
752378: RNCC: 3 | RNVC: 2

9 May 1996

5340-33-103-5135
Access Cover

331035135
1389: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-126-5812
Corner Brace

331265812
6.302.0.982.006.5: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-205-4450
Mounting Plate

332054450
5038425: RNCC: 3 | RNVC: 2
1.124.60.006.01-A: RNCC: 5 | RNVC: 2

3 Oct 2006

5340-33-156-2169
Angle Bracket

331562169
-12100424-1: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-205-4025
Mounting Plate

332054025
5039951: RNCC: 3 | RNVC: 2
1.143.51.027: RNCC: 5 | RNVC: 2

14 Sep 2006

5340-33-125-8598
Access Cover

331258598
9.302.1.410.029.4: RNCC: 3 | RNVC: 2

4 Nov 1992

5340-33-108-7376
Mounting Bracket

331087376
WW 486 402 A: RNCC: 3 | RNVC: 2
59.17.038: RNCC: 5 | RNVC: 2

16 Jul 2001

5340-33-157-7766
Mending Plate

331577766
594796: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-136-5022
Angle Bracket

331365022
STS-MB1-TOA-113: RNCC: 3 | RNVC: 2

26 Oct 1993

5340-33-211-1989
Loop Clamp

332111989
017769691: RNCC: 3 | RNVC: 2
UNE-EN 14420-3: RNCC: 4 | RNVC: 1

8 Jul 2013

5340-33-127-0287
Door Closer

331270287
FAX 12403-820: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-33-002-9929
Retaining Clip

330029929
1288878: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-003-5116
Leather Strap

330035116
6316327710: RNCC: 3 | RNVC: 2

13 Nov 1997

5340-33-002-1547
Mounting Bracket

330021547
318790: RNCC: 3 | RNVC: 2
318790: RNCC: 3 | RNVC: 2

1 Jul 1993

5340-33-003-0282
Retaining Strap

330030282
0041109007: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-102-1824
Access Cover

331021824
42330000050: RNCC: 3 | RNVC: 2
MCL-3-5: RNCC: 3 | RNVC: 2
42330000050: RNCC: 3 | RNVC: 2
MCL-3-5: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-114-5045
Detent Plunger

331145045
5TG 5-232: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-001-9159
Expansion Shield

330019159
C-20050-7-0-I-05-5: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-001-1055
Mounting Bracket

330011055
35-46734-0005: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-103-0715
Mounting Plate

331030715
1005-001381: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-0002
Mounting Plate

331080002
9644.250.5558: RNCC: 3 | RNVC: 2
2540000636: RNCC: 5 | RNVC: 2
2540000636: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-202-9347
Cushioning Pad

332029347
CBD50507P15: RNCC: 3 | RNVC: 2

1 Dec 2003

5340-33-202-1633
Cushioning Pad

332021633
723561718-02: RNCC: 3 | RNVC: 2
723561718-02: RNCC: 5 | RNVC: 2

5 Feb 2003

5340-33-200-7980
Mounting Bracket

332007980
317322: RNCC: 3 | RNVC: 2

12 Mar 2002

5340-33-202-0595
Retaining Strap

332020595
1025-901534: RNCC: 3 | RNVC: 2

2 Jan 2003

5340-33-157-7147
Catch Strike

331577147
313514: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-4797
Access Cover

330034797
105 6929: RNCC: 3 | RNVC: 2

5 Nov 1997

5340-33-106-5326
Locking Stay

331065326
C0601000: RNCC: 3 | RNVC: 2

8 Apr 1998

5340-33-211-1123
Leather Strap

332111123
10120228060: RNCC: 3 | RNVC: 2

15 Jun 2013

5340-33-157-8413
Mending Plate

331578413
752313: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-6418
Retaining Strap

332046418
0850483001400: RNCC: 3 | RNVC: 2

17 Nov 2005

5340-33-203-6641
Retaining Strap

332036641
Q 314 602 306: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-33-211-2992
Mounting Plate

332112992
5061541: RNCC: 3 | RNVC: 2
1.164.91.003: RNCC: 5 | RNVC: 2

13 Aug 2013

5340-33-187-5593
Loop Clamp

331875593
0301154-7: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-3280
Hinged Hasp

331603280
6106021: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-3877
Loop Clamp

331063877
411.097.1255: RNCC: 3 | RNVC: 2
5975000959: RNCC: 5 | RNVC: 2
TC3-097.1255: RNCC: 5 | RNVC: 2

3 Dec 1997

5340-33-160-3794
Retaining Strap

331603794
26.141.599: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-6388
Loop Clamp

331556388
753098: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-115-8175
Access Cover

331158175
92277500408: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-188-8326
Door Closer

331888326
610602802: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-33-107-8765
Mounting Plate

331078765
7054.252.0067: RNCC: 3 | RNVC: 2
2510700837: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-33-205-0302
Butt Hinge

332050302
0227431: RNCC: 3 | RNVC: 2

11 Apr 2006

5340-33-106-1491
Retaining Strap

331061491
5.115.369.0 - MEISA: RNCC: 3 | RNVC: 2

14 May 1997

5340-33-108-5580
Retaining Band

331085580
9644.290.5130: RNCC: 3 | RNVC: 2
2910000292: RNCC: 5 | RNVC: 2
2910000292: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-160-5818
Mechanical Stop

331605818
75.514.310: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-3683
Rim Lock

331603683
1710054: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-005-0347
Mortise Latch

330050347
5386109: RNCC: 3 | RNVC: 2

29 May 2000

5340-33-002-1537
Mounting Bracket

330021537
314047: RNCC: 3 | RNVC: 2
314047: RNCC: 5 | RNVC: 2

1 Jul 1993

5340-33-001-2768
Loop Clamp

330012768
CAN67282D16M: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-161-5262
Access Cover

331615262
312062: RNCC: 3 | RNVC: 2
312062: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-107-6893
Retaining Strap

331076893
CF 814 274 AE: RNCC: 3 | RNVC: 2
590.84.13: RNCC: 5 | RNVC: 2

17 Apr 2000

5340-33-205-4029
Mounting Plate

332054029
5040706: RNCC: 3 | RNVC: 2
1.143.60.936: RNCC: 5 | RNVC: 2

14 Sep 2006

5340-33-206-9554
Utility Resilient Mount

332069554
135276: RNCC: 3 | RNVC: 2
U-RAD-001-A: RNCC: 5 | RNVC: 2
BRB80-50SH-M12: RNCC: 5 | RNVC: 2
50FAX19800092: RNCC: 5 | RNVC: 2

26 Sep 2008

5340-33-107-7361
Retaining Strap

331077361
7562.252.0307: RNCC: 3 | RNVC: 2
4730700080: RNCC: 5 | RNVC: 2

20 Jun 2000

5340-33-201-8242
Cushioning Pad

332018242
9330000228: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-002-7160
Flange Protector

330027160
0000084: RNCC: 3 | RNVC: 2
NG0000084: RNCC: 3 | RNVC: 2

26 Jul 1995

5340-33-201-9888
Mounting Bracket

332019888
1025-900777: RNCC: 3 | RNVC: 2

9 Dec 2002

5340-33-108-7053
Bow Handle

331087053
7054.252.1470: RNCC: 3 | RNVC: 2
2540700040: RNCC: 5 | RNVC: 2

14 Jun 2001

5340-33-000-6990
Loop Clamp

330006990
782376: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-154-5363
Expansion Plug

331545363
631852: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-204-7858
Access Cover

332047858
5037137: RNCC: 3 | RNVC: 2
1.124.92.057: RNCC: 5 | RNVC: 2

20 Jan 2006

5340-33-200-3913
Support Hook

332003913
CF 472 926 A: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-116-8169
Padlock

331168169
005.041.000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-9046
Mounting Plate

332029046
223551704-01: RNCC: 3 | RNVC: 2
223551704: RNCC: 5 | RNVC: 1

27 Nov 2003

5340-33-202-9931
Mounting Plate

332029931
223551399-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-153-9684
Door Handle

331539684
801149: RNCC: 3 | RNVC: 2

4 Jan 1990

5340-33-202-7046
Angle Bracket

332027046
9673.590.5023: RNCC: 3 | RNVC: 2
2510900957: RNCC: 5 | RNVC: 2
2510900957: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-156-5016
Loop Clamp

331565016
-22441-N8710: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-0258
Butt Hinge

331540258
801434: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-157-2012
Rod End Clevis

331572012
-06300153-4: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-126-4962
Loop Clamp

331264962
W267014174005: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-5524
Access Cover

332015524
222411451-01: RNCC: 3 | RNVC: 2

2 Sep 2002

5340-33-202-5169
Mounting Plate

332025169
222421714-01: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-33-202-5174
Mounting Bracket

332025174
722422538-01: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-33-202-9819
Mounting Plate

332029819
223551706-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-103-8625
Expansion Plug

331038625
M6-87 6 3: RNCC: 3 | RNVC: 2
M6-87.6.3: RNCC: 3 | RNVC: 2
00036: RNCC: 5 | RNVC: 2

28 Jun 1995

5340-33-202-9071
Mounting Plate

332029071
223552770-01: RNCC: 3 | RNVC: 2
223552770: RNCC: 5 | RNVC: 1

27 Nov 2003

5340-33-201-4364
Access Cover

332014364
223581214-01: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-33-204-1378
Mounting Bracket

332041378
064.06.01.23.M01: RNCC: 3 | RNVC: 2

7 Apr 2005

5340-33-106-8101
Mounting Bracket

331068101
RE-50-2-9-5: RNCC: 3 | RNVC: 2

31 Mar 1999

5340-33-204-9642
Mounting Plate

332049642
0219205: RNCC: 3 | RNVC: 2

28 Feb 2006

5340-33-205-0260
Hinge Torsion Bar

332050260
0405052: RNCC: 3 | RNVC: 2

6 Apr 2006

5340-33-205-2135
Mounting Bracket

332052135
CBD50509P37: RNCC: 3 | RNVC: 2

22 Jun 2006

5340-33-206-1960
Mounting Plate

332061960
CBD58505P51: RNCC: 3 | RNVC: 2

24 Sep 2007

5340-33-156-2354
Angle Bracket

331562354
-17370-Y9500: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-157-9475
Mending Plate

331579475
753675: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-5230
Access Cover

330045230
8701.67: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-155-2367
Retaining Band

331552367
32X2,5: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-003-5113
Handle Grip

330035113
6312601140: RNCC: 3 | RNVC: 2

13 Nov 1997

5340-33-116-3727
Plain Solid Disk

331163727
8990.017: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-7491
Support Hook

331607491
75.514.590: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-105-0612
Webbing Strap

331050612
PCT0023: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-206-3929
Flush Catch

332063929
0852320010500: RNCC: 3 | RNVC: 2

17 Dec 2007

5340-33-206-3565
Retaining Bail

332063565
903.101.14: RNCC: 3 | RNVC: 2

27 Nov 2007

5340-33-004-5140
Mounting Bracket

330045140
512893: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-211-1859
Angle Bracket

332111859
10-67011-0401: RNCC: 3 | RNVC: 2

6 Jul 2013

5340-33-000-0420
Locking Stay

330000420
H350GS/D005/1: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-201-9856
Access Cover

332019856
223571521-01: RNCC: 3 | RNVC: 2
223571521-01: RNCC: 5 | RNVC: 2

5 Dec 2002

5340-33-202-9017
Access Cover

332029017
223551371-01: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-202-9881
Mounting Bracket

332029881
723551813-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-000-7022
Loop Clamp

330007022
3090201549: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-001-5590
Retaining Strap

330015590
92041318: RNCC: 3 | RNVC: 2

15 Nov 1989

5340-33-204-9656
Mounting Plate

332049656
0223422: RNCC: 3 | RNVC: 2

1 Mar 2006

5340-33-203-7738
Lock-Release Lever

332037738
35-61429-0003: RNCC: 3 | RNVC: 2

29 Sep 2004

5340-33-001-1101
Rod End Clevis

330011101
35-46801-0201: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-202-9149
Mounting Bracket

332029149
1025-901797: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-211-2554
Access Door Hinge

332112554
08/12/149: RNCC: 3 | RNVC: 2

28 Jul 2013

5340-33-188-8569
Bail Handle

331888569
1210041: RNCC: 3 | RNVC: 2

18 Sep 1995

5340-33-187-5550
Loop Clamp

331875550
0201612-7: RNCC: 3 | RNVC: 2
09401-13409: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-6663
Mounting Plate

332006663
317313: RNCC: 3 | RNVC: 2

22 Feb 2002

5340-33-206-0633
Mounting Bracket

332060633
PCMSABMR059: RNCC: 3 | RNVC: 2

18 Jul 2007

5340-33-005-3423
Access Cover

330053423
882127: RNCC: 3 | RNVC: 2

2 Jul 2001

5340-33-202-0584
Mounting Bracket

332020584
1025-901757: RNCC: 3 | RNVC: 2

2 Jan 2003

5340-33-126-3261
Loop Clamp

331263261
9.302.1.977.003.4: RNCC: 3 | RNVC: 2

3 Nov 1992

5340-33-200-1305
Mounting Bracket

332001305
322043: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-001-2130
Mounting Bracket

330012130
35-71440-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-203-1053
Retaining Clip

332031053
5360-900123: RNCC: 3 | RNVC: 2

29 Jan 2004

5340-33-004-9375
Mounting Bracket

330049375
W290684504200: RNCC: 3 | RNVC: 2

14 Mar 2000

5340-33-001-4722
Angle Bracket

330014722
92026739: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-116-3725
Plain Solid Disk

331163725
8990.002: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-5544
Mounting Bracket

331065544
16577: RNCC: 3 | RNVC: 2

3 Jul 1998

5340-33-203-7893
Retaining Strap

332037893
10-30027-0101-00: RNCC: 2 | RNVC: 2
10-30027-0101: RNCC: 3 | RNVC: 2

15 Oct 2004

5340-33-108-2717
Catch Strike

331082717
9644.251.6414: RNCC: 3 | RNVC: 2
2510901078: RNCC: 5 | RNVC: 2
2510901078: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-211-1832
Angle Bracket

332111832
VR03406000: RNCC: 3 | RNVC: 2
VR03406000: RNCC: 3 | RNVC: 2

6 Jul 2013

5340-33-154-6940
Angle Bracket

331546940
750757: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-154-6666
Access Cover

331546666
619198: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-004-6418
Support Hook

330046418
154128: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-154-7480
Bow Handle

331547480
571896: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-001-0759
Mounting Bracket

330010759
35-46374-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-201-7164
Retaining Strap

332017164
1025-900813: RNCC: 3 | RNVC: 2

11 Oct 2002

Load More Results