What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 21 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 21 of 39

5340-33-116-3422
Retaining Band

331163422
3615.099: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-187-5597
Loop Clamp

331875597
0301158-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-005-3625
Mounting Bracket

330053625
021.04.02.02-1: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-33-200-1652
Mounting Plate

332001652
28110401: RNCC: 3 | RNVC: 2

26 Oct 2001

5340-33-001-1300
Rod End Connector

330011300
35-52240-0101: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-115-8523
Access Cover

331158523
H8/225/PH/6/3: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-33-157-8703
Blank Panel

331578703
814274: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-188-8330
Door Closer

331888330
6101037: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-33-204-1772
Mounting Bracket

332041772
W280698400101: RNCC: 3 | RNVC: 2

25 Apr 2005

5340-33-200-5939
Retaining Strap

332005939
WW 488 120: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-108-5377
Mechanical Stop

331085377
9644.251.5500: RNCC: 3 | RNVC: 2
2510010417: RNCC: 5 | RNVC: 2
2510010417: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-209-3097
Mounting Bracket

332093097
INS003002050060000: RNCC: 3 | RNVC: 2

28 Sep 2011

5340-33-108-4199
Mounting Bracket

331084199
9644.250.0906: RNCC: 3 | RNVC: 2
1005006149: RNCC: 5 | RNVC: 2
1005006149: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-201-8151
Hook Handle

332018151
492.090.0110: RNCC: 3 | RNVC: 2
5340700048: RNCC: 5 | RNVC: 2

25 Oct 2002

5340-33-000-0622
Angle Bracket

330000622
9.303.1.601.001.4: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-188-9472
Hinged Hasp

331889472
1690021: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-0109
Padlock

330020109
65 C: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-33-154-0457
Expansion Plug

331540457
807933: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-205-9252
Mounting Bracket

332059252
620160-1: RNCC: 3 | RNVC: 2

18 May 2007

5340-33-115-9265
Retaining Strap

331159265
DSH-335: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-5023
Loop Clamp

331565023
-20651-Y9500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-158-1306
Mechanical Stop

331581306
195029: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-33-156-2171
Angle Bracket

331562171
-30430-Y9600: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-004-5211
Access Cover

330045211
54479595: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-107-6847
Mounting Plate

331076847
20MMCH4407: RNCC: 3 | RNVC: 2

17 Apr 2000

5340-33-157-7399
Angle Bracket

331577399
512534: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-9699
Angle Bracket

331549699
15-72: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-108-5092
Loop Clamp

331085092
3310901211: RNCC: 3 | RNVC: 2

16 Apr 2001

5340-33-107-4567
Mounting Bracket

331074567
W290679500100: RNCC: 3 | RNVC: 2

4 Nov 1999

5340-33-181-0954
Metal Grille

331810954
-76816-G970X: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-004-1989
Mounting Bracket

330041989
640685: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-001-3505
Expansion Plug

330013505
92016023: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-204-7861
Access Cover

332047861
5038341: RNCC: 3 | RNVC: 2
1.124.92.081: RNCC: 5 | RNVC: 2

20 Jan 2006

5340-33-102-5911
Friction Catch Stud

331025911
653-H: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-3007
Mounting Plate

332113007
5061560: RNCC: 3 | RNVC: 2
1.164.91.019: RNCC: 5 | RNVC: 2

13 Aug 2013

5340-33-003-3426
Access Cover

330033426
406583004: RNCC: 3 | RNVC: 2

24 Jun 1997

5340-33-181-7843
Angle Bracket

331817843
-07700642-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-106-3648
Mounting Plate

331063648
1777B4146/3.6.6.06: RNCC: 3 | RNVC: 2

25 Nov 1997

5340-33-160-5668
Loop Clamp

331605668
91.512.450: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-208-3302
Utility Access Door

332083302
CF 204 773 BX: RNCC: 3 | RNVC: 2

12 Apr 2010

5340-33-001-1169
Rod End Clevis

330011169
35-49114-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-200-0877
Mounting Bracket

332000877
322541: RNCC: 3 | RNVC: 2

5 Oct 2001

5340-33-206-0401
Angle Bracket

332060401
NN60959P01: RNCC: 3 | RNVC: 2

10 Jul 2007

5340-33-156-4641
Rod End Connector

331564641
-54470-Y9500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-2624
Metal Grille

332012624
900247: RNCC: 3 | RNVC: 2
1400000900247: RNCC: 5 | RNVC: 2
900247: RNCC: 5 | RNVC: 2

11 Jun 2002

5340-33-107-4545
Mounting Bracket

331074545
W290677500300: RNCC: 3 | RNVC: 2

4 Nov 1999

5340-33-201-6903
Webbing Strap

332016903
323102: RNCC: 3 | RNVC: 2

3 Oct 2002

5340-33-103-4423
Access Cover

331034423
46 250 3BA: RNCC: 3 | RNVC: 2

3 May 1995

5340-33-155-6979
Access Cover

331556979
754978: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-108-4194
Webbing Strap

331084194
9644.250.0817: RNCC: 3 | RNVC: 2
1005006046: RNCC: 5 | RNVC: 2
1005006046: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-004-2344
Mechanical Stop

330042344
221601105: RNCC: 3 | RNVC: 2

5 Oct 1998

5340-33-106-8181
Mending Plate

331068181
191263: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-000-8699
Bow Handle

330008699
T-057045-33: RNCC: 3 | RNVC: 2

10 Feb 1989

5340-33-125-6819
Rod End Connector

331256819
57212619: RNCC: 3 | RNVC: 2

8 Jan 1991

5340-33-200-7370
Metal Grille

332007370
8500626101: RNCC: 3 | RNVC: 2

5 Mar 2002

5340-33-116-1366
Retaining Strap

331161366
DA-14225001: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-8872
Mounting Bracket

331068872
7356.252.2980: RNCC: 3 | RNVC: 2
2510011184: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-203-2715
Mounting Bracket

332032715
9673.250.6026: RNCC: 3 | RNVC: 2
2540901567: RNCC: 5 | RNVC: 2
2540901567: RNCC: 5 | RNVC: 2

19 Feb 2004

5340-33-108-0010
Mounting Plate

331080010
9644.250.5681: RNCC: 3 | RNVC: 2
2540000868: RNCC: 5 | RNVC: 2
2540000868: RNCC: 5 | RNVC: 2

24 Nov 2000

5340-33-000-6928
Loop Clamp

330006928
513083: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-108-5884
Loop Clamp

331085884
5975000045: RNCC: 3 | RNVC: 2

30 Apr 2001

5340-33-180-6920
Loop Clamp

331806920
240430: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-106-8873
Mounting Bracket

331068873
7356.292.1040: RNCC: 3 | RNVC: 2
2930700009: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-108-4456
Access Door Hinge

331084456
9644.251.5230: RNCC: 3 | RNVC: 2
2540001259: RNCC: 5 | RNVC: 2
2540001259: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-001-4770
Angle Bracket

330014770
92026799: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-155-9015
Access Cover

331559015
316747: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-187-4938
Access Cover

331874938
194493: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-189-2351
Support Hook

331892351
01090030: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-126-4766
Loop Clamp

331264766
8545.46: RNCC: 3 | RNVC: 2

3 Nov 1992

5340-33-155-6456
Bow Handle

331556456
819819: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-107-7415
Mounting Bracket

331077415
W290684003200: RNCC: 3 | RNVC: 2

19 May 2000

5340-33-104-9046
Mending Plate

331049046
630942: RNCC: 3 | RNVC: 2

12 Sep 1995

5340-33-190-1961
Access Cover

331901961
9207.125: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-1751
Mounting Bracket

330011751
35-62100-0101: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-154-6694
Mounting Bracket

331546694
310432: RNCC: 3 | RNVC: 2
2940000058: RNCC: 3 | RNVC: 2
310432: RNCC: 5 | RNVC: 9

2 Oct 1990

5340-33-200-5058
Access Cover

332005058
19523302: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-001-4726
Angle Bracket

330014726
92026743: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-106-5862
Mounting Plate

331065862
631 888 00 97: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-107-5878
Lock-Release Lever

331075878
50.41.009: RNCC: 3 | RNVC: 2

27 Jan 2000

5340-33-106-8881
Mounting Bracket

331068881
7356.252.2840: RNCC: 3 | RNVC: 2
1055001774: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-206-1781
Door Handle

332061781
SHN2220400: RNCC: 3 | RNVC: 2

17 Sep 2007

5340-33-002-8006
Retaining Strap

330028006
0004112293: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-161-3279
Mechanical Stop

331613279
532365: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-209-3571
Utility Guard Rail Section

332093571
DF 404 332 AX: RNCC: 3 | RNVC: 2

21 Nov 2011

5340-33-102-1498
Snap Hook

331021498
6207121: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-145-5630
Mounting Bracket

331455630
02-235: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-210-9288
Access Cover

332109288
J47B048570: RNCC: 3 | RNVC: 2

3 Apr 2013

5340-33-203-9995
Access Cover

332039995
A15500011: RNCC: 3 | RNVC: 2
IV33R272242: RNCC: 5 | RNVC: 2

31 Jan 2005

5340-33-116-6267
Access Cover

331166267
541.4.089: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-105-1166
Angle Bracket

331051166
15426-1: RNCC: 3 | RNVC: 2
580418: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-161-1355
Mounting Plate

331611355
7212.92: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-160-3869
Mounting Plate

331603869
95.592.772: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-4323
Mending Plate

331604323
95.606.343: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-4524
Compression Cup

330014524
92026456: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-000-6956
Loop Clamp

330006956
579455: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-155-7746
Angle Bracket

331557746
731669: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-155-9198
Mounting Bracket

331559198
5340001063: RNCC: 3 | RNVC: 2
314031: RNCC: 3 | RNVC: 2
314031: RNCC: 5 | RNVC: 9

29 Aug 1996

5340-33-209-4721
Utility Guard Rail Section

332094721
0664.20.5002.00: RNCC: 3 | RNVC: 2

28 Dec 2011

5340-33-201-8197
Utility Access Door

332018197
2540000600: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-189-1663
Handwheel

331891663
6123014: RNCC: 3 | RNVC: 2

25 Sep 1995

5340-33-105-9642
Angle Bracket

331059642
10.061: RNCC: 3 | RNVC: 2

18 Mar 1997

5340-33-200-1861
Access Cover

332001861
J57462615-002: RNCC: 3 | RNVC: 2

29 Oct 2001

5340-33-201-8243
Cushioning Pad

332018243
9330000377: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-155-4752
Access Cover

331554752
620927: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-187-5553
Loop Clamp

331875553
0201615-1: RNCC: 3 | RNVC: 2
09401-15101: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-145-6360
Access Cover

331456360
996590: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-6137
Retaining Strap

332056137
4720900018: RNCC: 3 | RNVC: 2
9682.101.1180: RNCC: 5 | RNVC: 2

16 Jan 2007

5340-33-000-6671
Angle Bracket

330006671
547058: RNCC: 1 | RNVC: 2

6 Sep 1988

5340-33-002-0876
Mounting Bracket

330020876
317669: RNCC: 3 | RNVC: 2

30 Oct 1992

5340-33-003-0588
Door Handle

330030588
7704001845: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-33-106-1920
Elastic Strap

331061920
AMIV250000: RNCC: 3 | RNVC: 2

24 Oct 1997

5340-33-106-8172
Angle Bracket

331068172
7356.252.2700: RNCC: 3 | RNVC: 2
2510010616: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-108-0675
Angle Bracket

331080675
7053.252.0035: RNCC: 3 | RNVC: 2
2510700056: RNCC: 5 | RNVC: 2

5 Dec 2000

5340-33-107-1824
Door Handle

331071824
920312: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-104-9728
Access Cover

331049728
752434: RNCC: 3 | RNVC: 2

12 Sep 1995

5340-33-155-7479
Mending Plate

331557479
551221: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-201-5731
Access Cover

332015731
185068: RNCC: 3 | RNVC: 2

4 Sep 2002

5340-33-200-9740
Retaining Strap

332009740
2510008317: RNCC: 3 | RNVC: 2
2510008317: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-001-1071
Mounting Bracket

330011071
35-46749-0201: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-1752
Angle Bracket

330011752
35-62100-0901: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-202-7085
Mounting Bracket

332027085
9673.250.5595: RNCC: 3 | RNVC: 2
2540900927: RNCC: 5 | RNVC: 2
2540900927: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-004-6193
Access Cover

330046193
0180470: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-180-7845
Threaded Rod End

331807845
543291: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-0187
Access Cover

332010187
2910000478: RNCC: 3 | RNVC: 2
2910000478: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-209-4396
Utility Guard Rail Section

332094396
0662.10.3004.00: RNCC: 3 | RNVC: 2

20 Dec 2011

5340-33-000-4236
Expansion Plug

330004236
3340804071: RNCC: 1 | RNVC: 2

28 Dec 1987

5340-33-155-7752
Angle Bracket

331557752
743362: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-201-0202
Retaining Strap

332010202
2910900103: RNCC: 3 | RNVC: 2
2910900103: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-107-9762
Mounting Bracket

331079762
9644.250.8220: RNCC: 3 | RNVC: 2
2540001199: RNCC: 5 | RNVC: 2
2540001199: RNCC: 5 | RNVC: 2

2 Nov 2000

5340-33-154-9702
Expansion Shield

331549702
62-79: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-201-0559
Mounting Bracket

332010559
76446910030: RNCC: 3 | RNVC: 2
76446910030: RNCC: 5 | RNVC: 2

24 Apr 2002

5340-33-200-9842
Mounting Plate

332009842
2510011090: RNCC: 3 | RNVC: 2
2510011090: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-200-3312
Metal Grille

332003312
AR600X300MM: RNCC: 3 | RNVC: 2

4 Jan 2002

5340-33-000-7513
Angle Bracket

330007513
690838: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-001-1394
Angle Bracket

330011394
35-54201-1401: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-108-4469
Mending Plate

331084469
9644.251.5617: RNCC: 3 | RNVC: 2
2540001458: RNCC: 5 | RNVC: 2
2540001458: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-106-8787
Expansion Plug

331068787
5340001735: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-102-2895
Loop Clamp

331022895
T976-A-5: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-33-180-6559
Bridge Clamp

331806559
200039: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-155-7443
Mending Plate

331557443
321599: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-155-9004
Access Cover

331559004
310207: RNCC: 3 | RNVC: 2
310207: RNCC: 5 | RNVC: 9

4 Jan 1991

5340-33-107-0623
Flush Catch Claw

331070623
9045923: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-107-5676
Access Cover

331075676
L2650057: RNCC: 3 | RNVC: 2

27 Jan 2000

5340-33-202-7077
Mounting Bracket

332027077
9673.250.6350: RNCC: 3 | RNVC: 2
2540900762: RNCC: 5 | RNVC: 2
2540900762: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-154-6535
Loop Clamp

331546535
534601: RNCC: 3 | RNVC: 2
5340001106: RNCC: 3 | RNVC: 2
534601: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-108-2396
Mounting Plate

331082396
0640.250.0632: RNCC: 3 | RNVC: 2
2510006603: RNCC: 5 | RNVC: 2
2510006603: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-106-3163
Clamp Bolt Assembly

331063163
ER-6102-BN: RNCC: 3 | RNVC: 2

4 Sep 1997

5340-33-145-5458
Angle Bracket

331455458
87-339: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-3538
Drift Bolt

330033538
11.12593-0071: RNCC: 3 | RNVC: 2

26 Jun 1997

5340-33-125-6047
Loop Clamp

331256047
W267014170002: RNCC: 3 | RNVC: 2

13 Sep 1995

5340-33-211-1988
Block Clamp

332111988
98171072: RNCC: 3 | RNVC: 2

8 Jul 2013

5340-33-211-3328
Webbing Strap

332113328
0308368: RNCC: 3 | RNVC: 2

24 Sep 2013

5340-33-107-0970
Loop Clamp

331070970
16683-Z5000: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-002-8377
Door Handle

330028377
SE022522601A: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-157-8009
Mending Plate

331578009
691857: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-3106
Retaining Strap

332043106
706150013: RNCC: 3 | RNVC: 2

30 Jun 2005

5340-33-202-9021
Mounting Plate

332029021
223551373-01: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-201-9510
Mounting Bracket

332019510
723571539-01: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-33-001-0731
Mounting Bracket

330010731
35-46358-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-116-6271
Access Cover

331166271
M-112-12: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-102-4012
Leather Strap

331024012
MB51-8-9: RNCC: 3 | RNVC: 2
MB51-8-9: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-0900
Mounting Bracket

331160900
BE-18134000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-6082
Cushioning Pad

332016082
9330000223: RNCC: 3 | RNVC: 2

9 Sep 2002

5340-33-161-3203
Mounting Plate

331613203
513731: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-160-5817
Mechanical Stop

331605817
75.416.729: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-1866
Access Door Hinge

331071866
336476: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-157-0176
Access Cover

331570176
-78810-G4000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-8330
Handle Grip

330038330
2774100103: RNCC: 3 | RNVC: 2

16 Jun 1998

5340-33-201-6451
Mending Plate

332016451
1025-900686: RNCC: 3 | RNVC: 2

23 Sep 2002

5340-33-204-1269
Bumper

332041269
M2.00003: RNCC: 3 | RNVC: 2

4 Apr 2005

5340-33-103-2192
Door Handle

331032192
9500.00.571525: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-8340
Retaining Strap

332048340
706150021: RNCC: 3 | RNVC: 2

13 Feb 2006

5340-33-005-1651
Threaded Rod End

330051651
890 1198: RNCC: 3 | RNVC: 2
M 6X25-A2-2 ISO-4026: RNCC: 5 | RNVC: 2
NORMA: DIN-913, ISO-4026: RNCC: 5 | RNVC: 2

20 Nov 2000

5340-33-005-2414
Self-Locking Insert

330052414
CAN61015M5-15A: RNCC: 3 | RNVC: 2

14 Feb 2001

5340-33-000-0458
Angle Bracket

330000458
H350GS/D097: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-002-3907
Mounting Bracket

330023907
9086000M8: RNCC: 3 | RNVC: 2

1 Feb 1995

5340-33-103-8408
Flush Catch Claw

331038408
X-31: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-115-9576
Mounting Plate

331159576
6.305.0.971.001.4: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-0183
Mounting Plate

331060183
13193-1: RNCC: 3 | RNVC: 2

16 Nov 1996

5340-33-126-9303
Loop Clamp

331269303
3617.010: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-004-4603
Angle Bracket

330044603
NN60286P01: RNCC: 3 | RNVC: 2

18 May 1999

5340-33-200-1676
Mounting Plate

332001676
28111104: RNCC: 3 | RNVC: 2

26 Oct 2001

5340-33-160-5663
Loop Clamp

331605663
95.602.682: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-1601
Retaining Strap

330021601
921.330.02: RNCC: 3 | RNVC: 2

1 Jul 1993

5340-33-108-2654
Mounting Bracket

331082654
9644.121.0480: RNCC: 3 | RNVC: 2
2510010710: RNCC: 5 | RNVC: 2
2510010710: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-156-4612
Door Handle

331564612
-90682-G9601: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-181-0282
Access Cover

331810282
-16720-C6800: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-157-8029
Angle Bracket

331578029
698038: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-5726
Mounting Bracket

331065726
1371226: RNCC: 3 | RNVC: 2
1371226: RNCC: 5 | RNVC: 2

9 Jul 1998

5340-33-107-1243
Mounting Bracket

331071243
610103704: RNCC: 3 | RNVC: 2
PCAMI/RP/0361010374: RNCC: 6 | RNVC: 9

29 Jun 1999

5340-33-103-2508
Mounting Bracket

331032508
1055-000589: RNCC: 3 | RNVC: 2

25 Jul 1995

5340-33-000-7471
Angle Bracket

330007471
512744: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-202-6082
Access Cover

332026082
201052503: RNCC: 3 | RNVC: 2
201052503: RNCC: 5 | RNVC: 2

4 Sep 2003

5340-33-203-2712
Mounting Bracket

332032712
9673.250.5455: RNCC: 3 | RNVC: 2
2540900837: RNCC: 5 | RNVC: 2
2540900837: RNCC: 5 | RNVC: 2

19 Feb 2004

5340-33-200-3901
Retaining Strap

332003901
CF 472 763 A: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-161-3210
Mounting Plate

331613210
521318: RNCC: 3 | RNVC: 2
41100104: RNCC: 5 | RNVC: 9

28 Apr 1995

5340-33-154-5692
Mending Plate

331545692
753733.01: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-003-6589
Retaining Strap

330036589
191258: RNCC: 3 | RNVC: 2
4139319010: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-108-0677
Angle Bracket

331080677
7053.252.0260: RNCC: 3 | RNVC: 2
2510700052: RNCC: 5 | RNVC: 2

5 Dec 2000

5340-33-203-1903
Angle Bracket

332031903
9673.120.0110: RNCC: 3 | RNVC: 2
2590900047: RNCC: 5 | RNVC: 2
2590900047: RNCC: 5 | RNVC: 2

12 Feb 2004

5340-33-154-6074
Runner

331546074
316931: RNCC: 3 | RNVC: 2

1 Dec 1989

5340-33-003-8101
Retaining Clip

330038101
730091105: RNCC: 3 | RNVC: 2

10 Jun 1998

5340-33-155-6242
Angle Bracket

331556242
821911: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-005-1922
Angle Bracket

330051922
SP07424: RNCC: 3 | RNVC: 2

28 Dec 2000

5340-33-108-6982
Mounting Bracket

331086982
7059.252.0390: RNCC: 3 | RNVC: 2
2510700707: RNCC: 5 | RNVC: 2

14 Jun 2001

5340-33-181-7259
Pipe Hanger

331817259
-06600650-1: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-002-9764
Retaining Clip

330029764
6319970586: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-103-3272
Mending Plate

331033272
36.109: RNCC: 3 | RNVC: 2

25 Jul 1995

5340-33-002-1164
Angle Bracket

330021164
5340-000646: RNCC: 3 | RNVC: 2

7 Jun 1993

5340-33-200-8552
Mounting Bracket

332008552
9644.251.5276: RNCC: 3 | RNVC: 2
2530001004: RNCC: 5 | RNVC: 2
2530001004: RNCC: 5 | RNVC: 2

5 Apr 2002

5340-33-205-4236
Mounting Bracket

332054236
5040388: RNCC: 3 | RNVC: 2
1.143.11.003: RNCC: 5 | RNVC: 2

20 Sep 2006

5340-33-144-6145
Mending Plate

331446145
G 512076: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-3975
Access Cover

332053975
5036671: RNCC: 3 | RNVC: 2
3.071.51.015: RNCC: 5 | RNVC: 2

13 Sep 2006

5340-33-158-2238
Retaining Clip

331582238
0216530-4: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-7572
Plug Button

332047572
D0941310699: RNCC: 3 | RNVC: 2

10 Jan 2006

5340-33-004-4838
Mounting Plate

330044838
NRC3896F1: RNCC: 3 | RNVC: 2

2 Jun 1999

5340-33-181-1166
Retaining Strap

331811166
-80590-F5000: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-9685
Angle Bracket

332009685
1005006143: RNCC: 3 | RNVC: 2
1005006143: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-108-4522
Webbing Strap

331084522
9644.251.6531: RNCC: 3 | RNVC: 2
2590900126: RNCC: 5 | RNVC: 2
2590900126: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-158-4191
Door Handle

331584191
230056: RNCC: 3 | RNVC: 2
230255: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-0153
Retaining Strap

331080153
9644.250.7130: RNCC: 3 | RNVC: 2
2540001000: RNCC: 5 | RNVC: 2
2540001000: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-108-4452
Mounting Bracket

331084452
9644.250.8720: RNCC: 3 | RNVC: 2
2540001231: RNCC: 5 | RNVC: 2
2540001231: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-115-9119
Mounting Plate

331159119
19512-ZE2-000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-8653
Mounting Plate

331068653
197002: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-115-6084
Plain Solid Disk

331156084
92290120100: RNCC: 3 | RNVC: 2

27 Apr 1995

5340-33-211-4138
Filler Opening Cap

332114138
56418013: RNCC: 3 | RNVC: 2

24 Oct 2013

5340-33-206-1167
Mounting Bracket

332061167
220126695: RNCC: 3 | RNVC: 2

21 Aug 2007

5340-33-001-8028
Access Cover

330018028
35-22827-0004-01: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-200-5860
Mounting Bracket

332005860
CF 218 197 B: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-206-2540
Door Holder

332062540
6765362: RNCC: 3 | RNVC: 2

16 Oct 2007

5340-33-157-7338
Access Cover

331577338
5340001037: RNCC: 3 | RNVC: 2
321361: RNCC: 3 | RNVC: 2
321361: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-2574
Mounting Plate

331612574
2530000470: RNCC: 3 | RNVC: 2
311668: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-33-107-2997
Access Cover

331072997
21124013000: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-107-0841
Rim Lock

331070841
09.90.018.600: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-108-1830
Mounting Bracket

331081830
7054.252.1260: RNCC: 3 | RNVC: 2
2510701034: RNCC: 5 | RNVC: 2

29 Jan 2001

5340-33-155-7717
Angle Bracket

331557717
500006484: RNCC: 3 | RNVC: 2
750074: RNCC: 5 | RNVC: 9

18 Oct 1990

5340-33-201-7276
Block Clamp

332017276
NN60528G01: RNCC: 3 | RNVC: 2

15 Oct 2002

5340-33-116-7114
Access Cover

331167114
A-515.113: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-4476
Leather Strap

332004476
WW 358 851 A: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-107-6469
Stand Base

331076469
7356.252.0886: RNCC: 3 | RNVC: 2
2510700817: RNCC: 5 | RNVC: 2

17 Apr 2000

5340-33-206-1501
Buckle

332061501
PS-911999: RNCC: 3 | RNVC: 2

5 Sep 2007

5340-33-205-6589
Bumper

332056589
115003: RNCC: 3 | RNVC: 2

8 Feb 2007

5340-33-205-5789
Rod End Clevis

332055789
CBD58504P73: RNCC: 3 | RNVC: 2

21 Dec 2006

5340-33-155-6160
Access Cover

331556160
815442: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-107-6393
Mounting Bracket

331076393
7060.252.0340: RNCC: 3 | RNVC: 2
2510700313: RNCC: 5 | RNVC: 2

17 Mar 2000

5340-33-107-6330
Mounting Bracket

331076330
7060.252.0050: RNCC: 3 | RNVC: 2
2510700783: RNCC: 5 | RNVC: 2

17 Mar 2000

5340-33-107-6465
Strap Hinge

331076465
7356.252.0874: RNCC: 3 | RNVC: 2
2510700814: RNCC: 5 | RNVC: 2

17 Apr 2000

5340-33-107-8809
Mounting Plate

331078809
W280689100010: RNCC: 3 | RNVC: 2

24 Aug 2000

5340-33-155-9307
Retaining Strap

331559307
313557: RNCC: 3 | RNVC: 2
313557: RNCC: 5 | RNVC: 9

4 Jan 1991

5340-33-200-5330
Access Cover

332005330
914754: RNCC: 3 | RNVC: 2

1 Feb 2002

5340-33-201-3082
Catch Strike

332013082
E2.42.00.08/6: RNCC: 3 | RNVC: 2
5340000963: RNCC: 5 | RNVC: 2

21 Jun 2002

5340-33-106-5749
Mounting Bracket

331065749
1385098: RNCC: 3 | RNVC: 2
1385098: RNCC: 5 | RNVC: 2

31 Mar 1999

5340-33-002-0100
Padlock

330020100
55 CD: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-33-005-0885
Mounting Plate

330050885
500321766: RNCC: 3 | RNVC: 2

20 Jun 2000

5340-33-161-4058
Angle Bracket

331614058
730056: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-161-2180
Mounting Bracket

331612180
5340-000627: RNCC: 3 | RNVC: 2

21 Sep 1995

5340-33-200-4923
Mounting Bracket

332004923
02151100: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-115-9292
Clamp Bolt Assembly

331159292
DSH-313: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-3769
Mounting Plate

332043769
5035479: RNCC: 3 | RNVC: 2

18 Aug 2005

5340-33-004-2059
Mounting Bracket

330042059
312390: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-105-7308
Flush Bolt

331057308
-90502-G2502: RNCC: 3 | RNVC: 2

9 May 1996

5340-33-000-1981
Access Cover

330001981
634686: RNCC: 1 | RNVC: 2
634686: RNCC: 3 | RNVC: 2

10 Dec 1986

5340-33-209-7785
Utility Guard Rail Section

332097785
0664.20.7005.00: RNCC: 3 | RNVC: 2

23 Feb 2012

5340-33-160-3635
Support Hook

331603635
6102020: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-8962
Mounting Plate

332008962
W290698611100: RNCC: 3 | RNVC: 2

10 Apr 2002

5340-33-166-0304
Angle Bracket

331660304
5.018-581.0: RNCC: 3 | RNVC: 2
5.018-581.0-MEISA: RNCC: 5 | RNVC: 2

20 Jul 1995

5340-33-105-1374
Lock-Release Lever

331051374
CMH95200-3/8-31: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-103-8617
Buckle

331038617
M6-87 4 4: RNCC: 3 | RNVC: 2
M6-87.4.4: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-33-126-5769
Rod End Connector

331265769
G38212-R-1100: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-8425
Loop Clamp

331078425
16916/A: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-33-107-9776
Mounting Bracket

331079776
9644.251.7140: RNCC: 3 | RNVC: 2
2590001222: RNCC: 5 | RNVC: 2
2590001222: RNCC: 5 | RNVC: 2

2 Nov 2000

5340-33-160-6415
Mounting Bracket

331606415
79.10.008.210: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-7427
Mounting Bracket

331087427
W290698100000: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-33-211-3955
Bumper

332113955
156006: RNCC: 3 | RNVC: 2
B013764: RNCC: 5 | RNVC: 2

17 Oct 2013

5340-33-160-4350
Mending Plate

331604350
95.601.078: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-5650
Bridge Clamp

332025650
95-46874-0201: RNCC: 3 | RNVC: 2

19 Aug 2003

5340-33-203-6532
Mounting Plate

332036532
CBD50523G02: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-33-201-2280
Metal Grille

332012280
2736.02.12: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-200-5132
Mounting Bracket

332005132
19567020: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-201-3860
Access Cover

332013860
223581334-01: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-33-201-9853
Mounting Plate

332019853
223591749-01: RNCC: 3 | RNVC: 2

5 Dec 2002

5340-33-002-4747
Rod End Connector

330024747
212-53105-24-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-102-5702
Access Cover

331025702
222302115: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-33-004-6129
Catch Strike

330046129
619204: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-33-126-0618
Angle Bracket

331260618
8866.15: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-33-108-5390
Utility Access Door

331085390
9644.251.9060: RNCC: 3 | RNVC: 2
2510900783: RNCC: 5 | RNVC: 2
2510900783: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-000-1038
Detent Plunger

330001038
6.0690.56.0.0260: RNCC: 1 | RNVC: 2

13 Mar 1997

5340-33-202-6734
Angle Bracket

332026734
5034187: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-33-105-1074
Rod End Connector

331051074
42320010170: RNCC: 3 | RNVC: 2
42320010170: RNCC: 3 | RNVC: 2
VB-100-C-0500: RNCC: 5 | RNVC: 2

19 Nov 1997

5340-33-000-9684
Access Cover

330009684
35-13325-0401: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-205-3571
Mounting Bracket

332053571
BMY-20284: RNCC: 3 | RNVC: 2

24 Aug 2006

5340-33-001-3937
Access Cover

330013937
92020511: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-157-7485
Mending Plate

331577485
536109: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-180-9163
Catch Strike

331809163
207342: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-6983
Loop Clamp

330006983
768938: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-108-6570
Retaining Band

331086570
114901.133: RNCC: 3 | RNVC: 2
114901.133: RNCC: 5 | RNVC: 2

30 Apr 2001

5340-33-204-5180
Access Cover

332045180
6.302.0.972.007.5: RNCC: 3 | RNVC: 2

5 Oct 2005

5340-33-103-5149
Retaining Strap

331035149
1443-14-15: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-001-6845
Mounting Bracket

330016845
D57085-00: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-002-8482
Door Closer

330028482
SE138521200A: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-108-3197
Mounting Plate

331083197
SP06517: RNCC: 3 | RNVC: 2

13 Feb 2001

5340-33-106-9408
Mounting Plate

331069408
584722: RNCC: 3 | RNVC: 2

7 Apr 1999

5340-33-108-0074
Mounting Plate

331080074
9644.251.6537: RNCC: 3 | RNVC: 2
2540900507: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-107-2668
Strap Fastener Loop

331072668
SG25: RNCC: 3 | RNVC: 2
PCAMI/RP/43E000SG25: RNCC: 6 | RNVC: 9

21 Sep 1999

5340-33-003-3503
Loop Clamp

330033503
R508-E8X12: RNCC: 3 | RNVC: 2

25 Jun 1997

5340-33-158-9568
Access Cover

331589568
00.591.177.07: RNCC: 3 | RNVC: 2

18 Sep 1992

5340-33-106-8857
Angle Bracket

331068857
475171: RNCC: 3 | RNVC: 2

5 Apr 1999

5340-33-106-5198
Mounting Plate

331065198
021.05.11: RNCC: 3 | RNVC: 2

7 Apr 1998

5340-33-002-0136
Rod End Connector

330020136
867 1303: RNCC: 3 | RNVC: 2
867 1303: RNCC: 5 | RNVC: 2

30 Jul 1992

5340-33-107-0326
Access Door Hinge

331070326
I2034: RNCC: 3 | RNVC: 2

25 May 1999

5340-33-114-4815
Lock-Release Lever

331144815
10ILA 5-24: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-102-2957
Rod End Clevis

331022957
976-C-2: RNCC: 3 | RNVC: 2

11 Jan 1991

5340-33-102-2939
Mounting Bracket

331022939
G976-C-3: RNCC: 3 | RNVC: 2

11 Jan 1991

5340-33-154-0458
Expansion Plug

331540458
807935: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-201-4616
Angle Bracket

332014616
J29165200-401: RNCC: 3 | RNVC: 2

26 Jul 2002

5340-33-207-9686
Utility Resilient Mount

332079686
2510-002826: RNCC: 3 | RNVC: 2

15 Dec 2009

5340-33-205-5770
Mounting Bracket

332055770
CBD58504P31: RNCC: 3 | RNVC: 2

21 Dec 2006

5340-33-155-7731
Angle Bracket

331557731
511089: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-156-2184
Angle Bracket

331562184
-11232-D9701: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-204-8008
Flush Catch Claw

332048008
1202372: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-33-106-8164
Angle Bracket

331068164
312145: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-154-0272
Butt Hinge

331540272
814309: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-200-2665
Utility Access Door

332002665
100402010000: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-33-103-5574
Mounting Bracket

331035574
318821: RNCC: 3 | RNVC: 2

12 Oct 1996

5340-33-153-8085
Runner

331538085
193203: RNCC: 3 | RNVC: 2

3 Nov 1989

5340-33-180-7602
Pipe Hanger

331807602
508339: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-154-9806
Rod End Clevis

331549806
77037.00.4: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-106-1951
Rod End Clevis

331061951
13718: RNCC: 3 | RNVC: 2

24 Oct 1997

5340-33-202-6205
Catch Strike

332026205
9673.250.0295: RNCC: 3 | RNVC: 2
1005900190: RNCC: 5 | RNVC: 2
1005900190: RNCC: 5 | RNVC: 2

12 Sep 2003

5340-33-202-3052
Rim Lock Set

332023052
27482029: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-33-180-5206
Flange Protector

331805206
NRC3448: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-002-0002
Mounting Bracket

330020002
35-61406-0003: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-205-9047
Strap Hinge

332059047
3025: RNCC: 3 | RNVC: 2

9 May 2007

5340-33-155-7446
Mending Plate

331557446
521149: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-116-8263
Mending Plate

331168263
M4T403-01-07: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-5865
Threaded Rod End

332035865
747336: RNCC: 3 | RNVC: 2

2 Jun 2004

5340-33-203-1068
Lock-Release Lever

332031068
1025-901875: RNCC: 3 | RNVC: 2

29 Jan 2004

5340-33-103-8618
Strap Fastener Loop

331038618
M6-87 4 5: RNCC: 3 | RNVC: 2
M6-87.4.5: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-33-102-4016
Webbing Strap

331024016
MB51-8-11: RNCC: 3 | RNVC: 2
MB51-8-11: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-3074
Retaining Strap

332003074
35-22040-4601: RNCC: 3 | RNVC: 2

12 Dec 2001

5340-33-206-2975
Bumper

332062975
59728 03K00: RNCC: 3 | RNVC: 2
59728-03K00: RNCC: 5 | RNVC: 2

30 Oct 2007

5340-33-158-2220
Retaining Clip

331582220
0216508-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-4844
Strap Hinge

330024844
212-22130-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-203-6500
Corner Brace

332036500
9356.592.7011: RNCC: 3 | RNVC: 2
2510-904093: RNCC: 5 | RNVC: 2

20 Jul 2004

5340-33-181-8275
Mounting Plate

331818275
-10100673-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-181-6640
Retaining Strap

331816640
-03500248-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-190-3883
Loop Clamp

331903883
2278-0: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-200-5890
Mounting Plate

332005890
CU 301 326 A: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-002-4615
Rod End Connector

330024615
212-41050-08-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-161-3560
Access Cover

331613560
580443: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-002-9512
Butt Hinge

330029512
6316890052: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-203-6874
Utility Access Door

332036874
2123010270: RNCC: 3 | RNVC: 2

24 Aug 2004

5340-33-000-0739
Angle Bracket

330000739
2064220: RNCC: 1 | RNVC: 2
17942: RNCC: 3 | RNVC: 2

10 Jul 1986

5340-33-210-8679
Rod End Connector

332108679
M575A6260002: RNCC: 3 | RNVC: 2

11 Mar 2013

5340-33-108-4760
Cushioning Pad

331084760
9644.251.6138: RNCC: 3 | RNVC: 2
9330900015: RNCC: 5 | RNVC: 2
9330900015: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-108-4283
Mounting Plate

331084283
9644.251.0326: RNCC: 3 | RNVC: 2
2510010325: RNCC: 5 | RNVC: 2
2510010325: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-107-7452
Mounting Bracket

331077452
W290684037600: RNCC: 3 | RNVC: 2

25 May 2000

5340-33-205-5652
Mounting Bracket

332055652
CBD57501P01: RNCC: 3 | RNVC: 2

19 Dec 2006

5340-33-000-7037
Loop Clamp

330007037
3090215649: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-108-0476
Mounting Plate

331080476
9644.281.5090: RNCC: 3 | RNVC: 2
2520000428: RNCC: 5 | RNVC: 2
2520000428: RNCC: 5 | RNVC: 2

11 Dec 2000

5340-33-188-9770
Mending Plate

331889770
3 170 178: RNCC: 3 | RNVC: 2

25 Sep 1995

5340-33-001-3209
Compression Cup

330013209
92010602: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-201-0169
Retaining Strap

332010169
2590900137: RNCC: 3 | RNVC: 2
2590900137: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-203-1792
Mounting Bracket

332031792
9673.250.6620: RNCC: 3 | RNVC: 2
2540900840: RNCC: 5 | RNVC: 2
2540900840: RNCC: 5 | RNVC: 2

11 Feb 2004

5340-33-202-7047
Mounting Bracket

332027047
9673.250.0910: RNCC: 3 | RNVC: 2
2510901090: RNCC: 5 | RNVC: 2
2510901090: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-160-7474
Support Hook

331607474
95.579.819: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-107-1779
Loop Clamp

331071779
411.097.1258: RNCC: 3 | RNVC: 2

1 Jul 1999

5340-33-003-6021
Access Cover

330036021
1055-001545: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-33-202-9835
Mounting Plate

332029835
723552731-02: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-108-5653
Cushioning Pad

331085653
0640.810.0048: RNCC: 3 | RNVC: 2
9330000222: RNCC: 5 | RNVC: 2
9330000222: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-202-5153
Access Cover

332025153
MHC2070100: RNCC: 3 | RNVC: 2
MHC1070100: RNCC: 5 | RNVC: 2

29 Jul 2003

5340-33-204-9041
Mounting Plate

332049041
13671-14D00: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-001-8564
Expansion Shield

330018564
20050-57ED: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-201-8179
Cushioning Pad

332018179
1005006019: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-200-7578
Mounting Plate

332007578
IN-050B-Q03I.08: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-33-116-0347
Angle Bracket

331160347
BA-15178010: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-6411
Mounting Bracket

330016411
D58776-00: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-200-9755
Detent Plunger

332009755
2510008345: RNCC: 3 | RNVC: 2
2510008345: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-158-1404
Mounting Bracket

331581404
315865: RNCC: 3 | RNVC: 2
315865: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-002-4862
Access Cover

330024862
212-24100-60-2: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-188-8332
Door Closer

331888332
6101035: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-33-002-9062
Butt Hinge

330029062
3097230451: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-001-3567
Compression Cup

330013567
92018107: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-202-7694
Mechanical Stop

332027694
SP05871: RNCC: 3 | RNVC: 2

20 Oct 2003

5340-33-001-4718
Angle Bracket

330014718
92026735: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-201-3555
Door Holder

332013555
92492934300: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-33-203-5614
Utility Access Door

332035614
80010102: RNCC: 3 | RNVC: 2

25 May 2004

5340-33-003-4423
Leather Strap

330034423
SP-159-270: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-202-0297
Stand Base

332020297
1025-901450: RNCC: 3 | RNVC: 2

19 Dec 2002

5340-33-002-8569
Mounting Plate

330028569
190343: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-33-200-5148
Access Cover

332005148
324283: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-200-5057
Access Cover

332005057
19523301: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-200-5945
Angle Bracket

332005945
WW 488 163: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-154-6592
Retaining Band

331546592
786253: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-001-2299
Rod End Connector

330012299
35-82200-0401: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-004-4640
Retaining Strap

330044640
11.44086-0545: RNCC: 3 | RNVC: 2
11.44086-0545: RNCC: 5 | RNVC: 2

19 May 1999

5340-33-001-1918
Mounting Plate

330011918
35-65163-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-116-0327
Mending Plate

331160327
BA-11282000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-5773
Mechanical Stop

331605773
91.504.946: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-0911
Mounting Bracket

332060911
PCMSABMR061: RNCC: 3 | RNVC: 2

2 Aug 2007

5340-33-209-7787
Utility Guard Rail Section

332097787
0664.20.7007.00: RNCC: 3 | RNVC: 2

23 Feb 2012

5340-33-103-1572
Mounting Bracket

331031572
1005-004221: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-1572
Strap Hinge

332061572
TMP36M-004: RNCC: 3 | RNVC: 2

7 Sep 2007

5340-33-157-7247
Angle Bracket

331577247
318142: RNCC: 3 | RNVC: 2
318142: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-210-6062
Catch Strike

332106062
MN7004: RNCC: 3 | RNVC: 2

28 Nov 2012

5340-33-157-7377
Access Cover

331577377
510257: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-126-8113
Retaining Strap

331268113
649021: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-0487
Mounting Bracket

332030487
1025-901862: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-33-102-2738
Leather Strap

331022738
A20X315DIN6409: RNCC: 3 | RNVC: 2
5340000083: RNCC: 5 | RNVC: 2

1 Mar 1991

5340-33-107-6226
Mounting Plate

331076226
9644.251.6043: RNCC: 3 | RNVC: 2
5310900017: RNCC: 5 | RNVC: 2
5310900017: RNCC: 5 | RNVC: 2

20 Jun 2000

5340-33-107-6376
Lock Bolt

331076376
958.000.027: RNCC: 3 | RNVC: 2

17 Mar 2000

5340-33-001-4723
Lock-Release Lever

330014723
92026740: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-001-5485
Angle Bracket

330015485
92040703: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-202-8400
Bumper

332028400
01.01.01.03: RNCC: 3 | RNVC: 2

10 Nov 2003

5340-33-201-0589
Mounting Bracket

332010589
113-0984-03: RNCC: 3 | RNVC: 2

24 Apr 2002

5340-33-003-7385
Mounting Plate

330037385
-13022-05E10: RNCC: 3 | RNVC: 2

5 Jun 1998

5340-33-106-7351
Retaining Strap

331067351
AM12040500: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-201-2494
Retaining Clip

332012494
5360-900025: RNCC: 3 | RNVC: 2

11 Jun 2002

5340-33-201-0194
Retaining Strap

332010194
2910900089: RNCC: 3 | RNVC: 2
2910900089: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-004-7125
Loop Clamp

330047125
NRN50052G19: RNCC: 3 | RNVC: 2

10 Sep 1999

5340-33-200-0305
Mounting Plate

332000305
7054.252.0428: RNCC: 3 | RNVC: 2
2540700111: RNCC: 5 | RNVC: 2

25 Sep 2001

5340-33-004-5161
Mounting Bracket

330045161
598531: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-204-8256
Mounting Plate

332048256
J92566170-405: RNCC: 3 | RNVC: 2

8 Feb 2006

5340-33-156-4637
Strap Hinge

331564637
-80400-01C01: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-7870
Door Holder

331037870
-01605008-2: RNCC: 3 | RNVC: 2

7 Mar 1997

5340-33-211-6373
Bow Handle

332116373
53204-94116000: RNCC: 3 | RNVC: 2

18 Dec 2013

5340-33-154-4939
Mounting Bracket

331544939
762649: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-200-6682
Access Cover

332006682
318994: RNCC: 3 | RNVC: 2

22 Feb 2002

5340-33-106-8870
Mounting Bracket

331068870
7356.252.3380: RNCC: 3 | RNVC: 2
2510011185: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-001-0627
Mounting Bracket

330010627
35-46276-0004: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-0955
Mounting Bracket

330010955
35-46648-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-102-2935
Mounting Bracket

331022935
976-A-12: RNCC: 3 | RNVC: 2

11 Jan 1991

5340-33-205-6083
Loop Clamp

332056083
090-00172: RNCC: 3 | RNVC: 2

15 Jan 2007

5340-33-004-5142
Mounting Bracket

330045142
622314: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-004-5229
Access Cover

330045229
7927: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-107-4670
Loop Clamp

331074670
322838: RNCC: 3 | RNVC: 2
322838: RNCC: 5 | RNVC: 2

1 Dec 1999

5340-33-106-8865
Mounting Bracket

331068865
7356.252.0697: RNCC: 3 | RNVC: 2
2510011178: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-157-8681
Angle Bracket

331578681
813327: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-4986
Bumper

331084986
99.08.82: RNCC: 3 | RNVC: 2

26 Mar 2001

5340-33-001-3528
Access Cover

330013528
92016046: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-000-6723
Retaining Strap

330006723
817274: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-104-8082
Mounting Bracket

331048082
506889: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-6067
Mounting Bracket

332116067
0918289000900: RNCC: 3 | RNVC: 2

7 Dec 2013

5340-33-201-4308
Retaining Strap

332014308
1025-900812: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-33-205-0070
Loop Clamp

332050070
36651-48E00: RNCC: 3 | RNVC: 2

30 Mar 2006

5340-33-211-1171
Latch Bar

332111171
0225830: RNCC: 3 | RNVC: 2

16 Jun 2013

5340-33-204-8952
Flush Catch

332048952
230130540: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-108-4475
Mounting Plate

331084475
9644.251.5592: RNCC: 3 | RNVC: 2
2540001468: RNCC: 5 | RNVC: 2
2540001468: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-204-0106
Utility Access Door

332040106
26A-4-019-P: RNCC: 3 | RNVC: 2
IV33R271530: RNCC: 5 | RNVC: 2

1 Feb 2005

5340-33-001-1191
Mounting Bracket

330011191
35-49132-0201: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-107-7413
Mounting Bracket

331077413
W290684002300: RNCC: 3 | RNVC: 2

19 May 2000

5340-33-161-3705
Shimmy Damper

331613705
616452: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-2204
Mounting Plate

332002204
28141103: RNCC: 3 | RNVC: 2

6 Nov 2001

5340-33-000-7474
Angle Bracket

330007474
533496: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-114-4857
Drift Bolt

331144857
5.50 TTG-10: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-126-5760
Rod End Connector

331265760
G38212-E-0800: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-6945
Access Cover

331576945
137607: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-3047
Rim Lock Set

332023047
27482011: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-33-155-9172
Mounting Bracket

331559172
312693: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-211-1239
Access Door Hinge

332111239
VR01180600: RNCC: 3 | RNVC: 2
VR01180600: RNCC: 3 | RNVC: 2

16 Jun 2013

5340-33-126-4580
Bow Handle

331264580
W290456513101: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-8889
Angle Bracket

331068889
312423: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-005-3872
Access Cover

330053872
2PP4136-1008P003: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-33-001-1029
Mounting Bracket

330011029
35-46717-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-105-0573
Rod End Clevis

331050573
REM-50-4-1-7: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-116-4495
Loop Clamp

331164495
92002466585: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-188-9475
Rod End Clevis

331889475
1670060: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-33-202-6248
Mounting Bracket

332026248
9673.250.1270: RNCC: 3 | RNVC: 2
1005900406: RNCC: 5 | RNVC: 2
1005900406: RNCC: 5 | RNVC: 2

16 Sep 2003

5340-33-201-1649
Rod Retainer Clip

332011649
906 547: RNCC: 3 | RNVC: 2

20 May 2002

5340-33-157-7569
Access Cover

331577569
551758: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-4266
Mounting Bracket

332044266
W280698401509: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-211-2881
Extension Handle

332112881
PCMSAPIZ016: RNCC: 3 | RNVC: 2

9 Aug 2013

5340-33-154-6950
Angle Bracket

331546950
821117: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-107-7027
Mounting Bracket

331077027
7562.252.0208: RNCC: 3 | RNVC: 2
2510700369: RNCC: 5 | RNVC: 2

17 Apr 2000

5340-33-209-2691
Access Cover

332092691
1025901924: RNCC: 3 | RNVC: 2
9743.100.0203: RNCC: 5 | RNVC: 2

21 Sep 2011

5340-33-203-8722
Access Cover

332038722
203490105: RNCC: 3 | RNVC: 2

15 Dec 2004

5340-33-002-4720
Angle Bracket

330024720
212-55110-02-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-126-2928
Rod End Clevis

331262928
1620090: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-33-200-1657
Mounting Bracket

332001657
28110501: RNCC: 3 | RNVC: 2

26 Oct 2001

5340-33-205-9913
Mounting Plate

332059913
220580: RNCC: 3 | RNVC: 2

13 Jun 2007

5340-33-004-2761
Access Cover

330042761
730030091: RNCC: 3 | RNVC: 2

25 Nov 1998

5340-33-155-8974
Mending Plate

331558974
313415: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-200-4392
Access Cover

332004392
WQ 412 136 BT: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-206-1826
Webbing Strap

332061826
0605953: RNCC: 3 | RNVC: 2

20 Sep 2007

5340-33-002-9511
Hinge Torsion Bar

330029511
6316890051: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-103-0874
Angle Bracket

331030874
411.091.0709: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-7480
Retaining Clip

331607480
79.10.020.430: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-1163
Mounting Bracket

330011163
35-49111-0006: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-000-9626
Access Cover

330009626
35-11392-0102: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-202-4896
Access Cover

332024896
2.135.149-A: RNCC: 3 | RNVC: 2
5033592: RNCC: 5 | RNVC: 2

14 Jul 2003

5340-33-103-2510
Mounting Plate

331032510
2590-000117: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-181-7501
Mechanical Stop

331817501
-06902378-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-190-3879
Loop Clamp

331903879
2249-0: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-160-5810
Mechanical Stop

331605810
79.03.088.063: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-7986
Access Cover

331577986
649693: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-2241
Mending Plate

331542241
712912: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-201-4046
Mending Plate

332014046
A2810581-001: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-108-1128
Snap Hook

331081128
5340001777: RNCC: 3 | RNVC: 2
DIN 5299/C/60/INOXIDABLE: RNCC: 4 | RNVC: 1

28 Dec 2000

5340-33-116-5649
Loop Clamp

331165649
90684-ZA0-600: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-189-1937
Catch Strike

331891937
02070130: RNCC: 3 | RNVC: 2

20 Jul 1995

Load More Results