What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 20 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 20 of 39

5340-33-201-4771
Access Cover

332014771
J52464020-403: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-003-3590
Retaining Clip

330033590
11.12597-0004: RNCC: 3 | RNVC: 2

26 Jun 1997

5340-33-200-7050
Mounting Plate

332007050
TL-1977/78-G02I.09: RNCC: 3 | RNVC: 2

26 Feb 2002

5340-33-203-8344
Angle Bracket

332038344
NN60647P01: RNCC: 3 | RNVC: 2

20 Nov 2004

5340-33-205-8187
Mounting Bracket

332058187
500334927AS: RNCC: 3 | RNVC: 2

17 Apr 2007

5340-33-004-7072
Angle Bracket

330047072
NN60137: RNCC: 1 | RNVC: 2
NN60137G01: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-33-203-1102
Utility Resilient Mount

332031102
136002: RNCC: 3 | RNVC: 2

30 Jan 2004

5340-33-116-4809
Threaded Rod End

331164809
11203000710: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-210-9871
Mounting Bracket

332109871
BL 1036: RNCC: 3 | RNVC: 2

29 Apr 2013

5340-33-211-4549
Utility Access Door

332114549
D0932511219: RNCC: 3 | RNVC: 2

27 Oct 2013

5340-33-206-1729
Mounting Plate

332061729
PCMSABMR081: RNCC: 3 | RNVC: 2

14 Sep 2007

5340-33-200-3974
Mounting Bracket

332003974
CF 807 302 AE: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-005-3713
Bumper

330053713
320109: RNCC: 3 | RNVC: 2
320109: RNCC: 5 | RNVC: 2

16 Jul 2001

5340-33-116-7208
Loop Clamp

331167208
42-A-128.100: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-3724
Mounting Bracket

331073724
REM-25-4-3-2: RNCC: 3 | RNVC: 2

4 Oct 1999

5340-33-200-2049
Access Door Hinge

332002049
J57166341-001: RNCC: 3 | RNVC: 2

5 Nov 2001

5340-33-160-3818
Mounting Plate

331603818
95.592.718: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-5031
Loop Clamp

331565031
-01555-00451: RNCC: 3 | RNVC: 2
-08723-11600: RNCC: 3 | RNVC: 2
01556-1602M: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-206-3987
Retaining Strap

332063987
XX-000047008100: RNCC: 3 | RNVC: 2
000047008100: RNCC: 5 | RNVC: 2

18 Dec 2007

5340-33-204-5386
Access Cover

332045386
203531900: RNCC: 3 | RNVC: 2

10 Oct 2005

5340-33-103-1121
Angle Bracket

331031121
375.090.0160: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-7123
Loop Clamp

330047123
NRN50052G15: RNCC: 3 | RNVC: 2

10 Sep 1999

5340-33-107-1768
Loop Clamp

331071768
4730002530: RNCC: 3 | RNVC: 2
DIN 3016 D1 18X25 W1 2: RNCC: 4 | RNVC: 1

1 Jul 1999

5340-33-003-1562
Mounting Bracket

330031562
317892: RNCC: 3 | RNVC: 2

22 Mar 1996

5340-33-106-5373
Furniture Cup

331065373
C0302080: RNCC: 3 | RNVC: 2
PCAMI/RP/29C0302080: RNCC: 4 | RNVC: 1
030208: RNCC: 5 | RNVC: 1

13 Apr 1998

5340-33-001-9059
Access Cover

330019059
PT-64288: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-116-3832
Mechanical Stop

331163832
EV-2357: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-181-5045
Loop Clamp

331815045
SS-06-0291A: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-107-3037
Bow Handle

331073037
21124506000: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-202-7286
Handle Grip

332027286
45.21.906: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-33-160-3223
Lock-Release Lever

331603223
116511076: RNCC: 3 | RNVC: 9
116511076: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-157-7932
Angle Bracket

331577932
643237: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-0645
Mounting Plate

330020645
GR F3 HZ: RNCC: 3 | RNVC: 2

7 Aug 1992

5340-33-108-6968
Mounting Bracket

331086968
7058.252.0010: RNCC: 3 | RNVC: 2
2510701098: RNCC: 5 | RNVC: 2

14 Jun 2001

5340-33-001-3194
Retaining Strap

330013194
92010103: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-202-7002
Mounting Bracket

332027002
9673.250.7280: RNCC: 3 | RNVC: 2
2540901423: RNCC: 5 | RNVC: 2
2540901423: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-106-3124
Access Cover

331063124
180057: RNCC: 3 | RNVC: 2

4 Sep 1997

5340-33-204-9795
Recess Handle

332049795
2012040: RNCC: 3 | RNVC: 2

17 Mar 2006

5340-33-001-1516
Mounting Bracket

330011516
35-56159-0007: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-103-2367
Mounting Bracket

331032367
4730-000116: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-8166
Retaining Strap

331168166
15 D-122: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-114-5006
Bow Handle

331145006
5TG 4-116: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-106-0605
Locking Stay

331060605
M47.510.020: RNCC: 3 | RNVC: 2

28 Dec 1996

5340-33-206-1874
Butt Hinge

332061874
92491010022: RNCC: 3 | RNVC: 2

20 Sep 2007

5340-33-103-4714
Angle Bracket

331034714
6371.045: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-4985
Angle Bracket

332034985
NN60886P01: RNCC: 3 | RNVC: 2

30 Apr 2004

5340-33-211-6324
Loop Clamp

332116324
21106: RNCC: 3 | RNVC: 2

13 Dec 2013

5340-33-155-8982
Mending Plate

331558982
315099: RNCC: 3 | RNVC: 2
5340001075: RNCC: 3 | RNVC: 2
315099: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-003-3547
Pipe Hanger

330033547
11.12586-0031: RNCC: 3 | RNVC: 2

26 Jun 1997

5340-33-157-8782
Angle Bracket

331578782
820170: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-9011
Mending Plate

331579011
318755: RNCC: 3 | RNVC: 2
318755: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-1182
Mounting Bracket

331031182
375.090.0106: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-6674
Retaining Strap

330006674
554056: RNCC: 1 | RNVC: 2

6 Sep 1988

5340-33-000-2883
Access Cover

330002883
648706: RNCC: 1 | RNVC: 2
648706: RNCC: 3 | RNVC: 2

22 May 1987

5340-33-001-0911
Lock-Release Lever

330010911
35-46629-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-157-8726
Blank Panel

331578726
815135: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-4576
Mounting Plate

331084576
9644.591.5600: RNCC: 3 | RNVC: 2
2920000104: RNCC: 5 | RNVC: 2
2920000104: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-211-4922
Angle Bracket

332114922
2540001117: RNCC: 3 | RNVC: 2

21 Nov 2013

5340-33-108-0303
Angle Bracket

331080303
-14017-V7200: RNCC: 3 | RNVC: 2

23 Nov 2000

5340-33-004-6486
Permanent Magnet

330046486
930216340057: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-160-6492
Bow Handle

331606492
95.546.212: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-158-1013
Mounting Bracket

331581013
510554: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-145-6112
Mounting Plate

331456112
TAB. D8-1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-153-9682
Door Handle

331539682
731196: RNCC: 3 | RNVC: 2
15100061: RNCC: 5 | RNVC: 9

4 Jan 1990

5340-33-201-4309
Loop Clamp

332014309
1025-901533: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-33-154-2230
Mending Plate

331542230
597097: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-000-6664
Retaining Strap

330006664
510863: RNCC: 1 | RNVC: 2

6 Sep 1988

5340-33-203-1498
Access Cover

332031498
9673.250.5770: RNCC: 3 | RNVC: 2
2540900574: RNCC: 5 | RNVC: 2
2540900574: RNCC: 5 | RNVC: 2

6 Feb 2004

5340-33-211-4734
Mounting Bracket

332114734
TOM0202804: RNCC: 3 | RNVC: 2
TOM0202804: RNCC: 3 | RNVC: 2

16 Nov 2013

5340-33-156-4988
Loop Clamp

331564988
-24220-U7400: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-6405
Access Cover

332026405
9673.590.5610: RNCC: 3 | RNVC: 2
2510901553: RNCC: 5 | RNVC: 2
2510901553: RNCC: 5 | RNVC: 2

18 Sep 2003

5340-33-001-1011
Mounting Bracket

330011011
35-46697-0103: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-0091
Mounting Bracket

330010091
35-34053-0103: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-211-5096
Access Cover

332115096
0406359: RNCC: 3 | RNVC: 2

23 Nov 2013

5340-33-004-1872
Mounting Plate

330041872
230091680: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-200-3929
Mounting Bracket

332003929
CF 492 944 A: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-206-1976
Stand Base

332061976
CBD58505P32: RNCC: 3 | RNVC: 2

24 Sep 2007

5340-33-116-6587
Rod End Clevis

331166587
15 M-20: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-104-8968
Access Cover

331048968
588579: RNCC: 3 | RNVC: 2

12 Sep 1995

5340-33-204-9462
Access Cover

332049462
48420-7C900: RNCC: 3 | RNVC: 2

24 Feb 2006

5340-33-126-9317
Plain Solid Disk

331269317
6000.036: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-201-8178
Cushioning Pad

332018178
1005005960: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-203-7027
Mounting Bracket

332037027
999096019: RNCC: 3 | RNVC: 2
999096019: RNCC: 5 | RNVC: 2

9 Sep 2004

5340-33-200-9736
Mounting Bracket

332009736
2510008313: RNCC: 3 | RNVC: 2
2510008313: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-116-5523
Access Cover

331165523
21521-883-741: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-0240
Access Cover

331570240
-27939-Y9501: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-0694
Tee Hinge

332040694
25001014000: RNCC: 3 | RNVC: 2

8 Mar 2005

5340-33-201-4211
Angle Bracket

332014211
A2811768-002: RNCC: 3 | RNVC: 2

10 Jul 2002

5340-33-001-0565
Mounting Bracket

330010565
35-46241-0301: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-116-5535
Access Cover

331165535
19641-896-000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-0197
Bow Handle

331540197
585940: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-001-0848
Mounting Bracket

330010848
35-46514-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-000-1885
Loop Clamp

330001885
567262: RNCC: 1 | RNVC: 2
567262: RNCC: 3 | RNVC: 2
500005819: RNCC: 5 | RNVC: 2
21100517: RNCC: 5 | RNVC: 9

10 Dec 1986

5340-33-203-9252
Blank Panel

332039252
055-14.01: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-33-200-7845
Mounting Bracket

332007845
7562.292.0018: RNCC: 3 | RNVC: 2
2510010407: RNCC: 5 | RNVC: 2

12 Mar 2002

5340-33-106-8647
Retaining Strap

331068647
2510700376: RNCC: 3 | RNVC: 2
322503: RNCC: 3 | RNVC: 2
7562.252.1680: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-107-0960
Loop Clamp

331070960
0301652-2: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-103-1136
Access Cover

331031136
1005-005666: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-1762
Mounting Bracket

330011762
35-62180-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-2865
Retaining Strap

330012865
CAN68089-2233: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-106-8658
Mechanical Stop

331068658
2510008788: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-116-8607
Butt Hinge

331168607
598/6-3: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-166-0440
Access Cover

331660440
NM-4704: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-203-3451
Mounting Plate

332033451
CS-EF2-AG1040802: RNCC: 3 | RNVC: 2

3 Mar 2004

5340-33-157-8622
Angle Bracket

331578622
806911: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-6325
Mounting Bracket

331076325
7060.252.0135: RNCC: 3 | RNVC: 2
2510700585: RNCC: 5 | RNVC: 2

18 May 2000

5340-33-158-8944
Loop Clamp

331588944
-376833-X1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-6146
Mending Plate

331166146
SA-E-506: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-4229
Mounting Plate

332014229
A2810436-002: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-33-108-2696
Retaining Band

331082696
9644.251.0406: RNCC: 3 | RNVC: 2
2510900850: RNCC: 5 | RNVC: 2
2510900850: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-204-4265
Mounting Bracket

332044265
W290605760600: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-200-3855
Access Cover

332003855
CF 122 275 AR: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-107-4145
Mounting Plate

331074145
7062.252.0051: RNCC: 3 | RNVC: 2
2510700643: RNCC: 5 | RNVC: 2

15 Oct 1999

5340-33-200-6679
Mounting Bracket

332006679
318985: RNCC: 3 | RNVC: 2

22 Feb 2002

5340-33-108-2560
Utility Access Door

331082560
9644.251.0770: RNCC: 3 | RNVC: 2
2510009744: RNCC: 5 | RNVC: 2
2510009744: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-001-0868
Mounting Bracket

330010868
35-46524-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-000-9622
Access Cover

330009622
35-11390-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-200-9330
Mounting Bracket

332009330
35-11000-0403: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-33-155-7751
Angle Bracket

331557751
319512: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-155-5214
Access Cover

331555214
682868: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-155-7776
Angle Bracket

331557776
738426: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-158-4339
Access Cover

331584339
510192: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-203-4237
Loop Clamp

332034237
RNSL-60: RNCC: 3 | RNVC: 2

2 Apr 2004

5340-33-190-5547
Mounting Bracket

331905547
K43180093-001: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-102-1373
Mounting Bracket

331021373
70B-6306108: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-116-0346
Angle Bracket

331160346
BA-15178020: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-1054
Mounting Bracket

330011054
35-46733-0301: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-116-7842
Mending Plate

331167842
00.00427/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-187-5554
Loop Clamp

331875554
0201616-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-5296
Access Cover

332025296
MHC2130300: RNCC: 3 | RNVC: 2
MHC1130300: RNCC: 5 | RNVC: 2

4 Aug 2003

5340-33-206-3183
Friction Catch

332063183
903.101.04: RNCC: 3 | RNVC: 2

6 Nov 2007

5340-33-155-2089
Hinged Hasp

331552089
25,14.13: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-33-204-9218
Mounting Bracket

332049218
5940900031: RNCC: 3 | RNVC: 2
9742.100.0700: RNCC: 5 | RNVC: 2

22 Feb 2006

5340-33-001-0663
Mounting Bracket

330010663
35-46297-0304: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-200-4409
Cushioning Pad

332004409
WW 217 283 AX: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-192-3772
Retaining Strap

331923772
140.160: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-000-6702
Retaining Strap

330006702
698041: RNCC: 1 | RNVC: 2

7 Sep 1988

5340-33-204-9033
Mounting Plate

332049033
61342-36E30: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-106-6889
Vent Plug

331066889
8-790-522-000: RNCC: 3 | RNVC: 2
PCAMI/RP/2290522000: RNCC: 6 | RNVC: 9

18 Jan 1999

5340-33-181-8336
Mounting Plate

331818336
-11100231-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-103-2460
Detent Plunger

331032460
1055-000390: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-6694
Retaining Strap

330006694
640420: RNCC: 1 | RNVC: 2

7 Sep 1988

5340-33-126-4568
Access Cover

331264568
W280256501020: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-6922
Loop Clamp

330006922
192734: RNCC: 1 | RNVC: 2
4022291: RNCC: 3 | RNVC: 2

8 Sep 1988

5340-33-126-4114
Loop Clamp

331264114
C39104-Z43-C2: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-126-5107
Access Cover

331265107
C22165-A1000-C11: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-145-5682
Rod End Clevis

331455682
70-121: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-200-5110
Retaining Strap

332005110
19561105: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-203-2687
Access Cover

332032687
9673.250.7340: RNCC: 3 | RNVC: 2
2540900950: RNCC: 5 | RNVC: 2
2540900950: RNCC: 5 | RNVC: 2

19 Feb 2004

5340-33-103-5286
Expansion Plug

331035286
9505-1-2-09: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-108-2150
Utility Access Door

331082150
9644.100.0730: RNCC: 3 | RNVC: 2
1005005387: RNCC: 5 | RNVC: 2
1005005387: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-000-7731
Threaded Rod End

330007731
423200003600000: RNCC: 3 | RNVC: 2

1 Dec 1988

5340-33-105-0637
Mounting Plate

331050637
PCT0043: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-155-9227
Mounting Bracket

331559227
556854: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-106-8188
Angle Bracket

331068188
2510011272: RNCC: 3 | RNVC: 2
COH-05015: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-001-1624
Mounting Bracket

330011624
35-61102-0701: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-106-6036
Padlock

331066036
5340001790: RNCC: 3 | RNVC: 2
K-50 ARCO LARGO: RNCC: 3 | RNVC: 2

4 Sep 1998

5340-33-000-9694
Mounting Bracket

330009694
35-13393-0103: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-004-4548
Mounting Bracket

330044548
CLT0047-10: RNCC: 3 | RNVC: 2

17 May 1999

5340-33-201-4618
Angle Bracket

332014618
J29165201-001: RNCC: 3 | RNVC: 2

26 Jul 2002

5340-33-003-7036
Mounting Bracket

330037036
318364: RNCC: 3 | RNVC: 2
318364: RNCC: 5 | RNVC: 2

4 Jun 1998

5340-33-106-4386
Mounting Bracket

331064386
631 988 01 83: RNCC: 3 | RNVC: 2

29 Jan 1998

5340-33-107-6331
Mounting Plate

331076331
7060.252.0230: RNCC: 3 | RNVC: 2
2510700799: RNCC: 5 | RNVC: 2

17 Mar 2000

5340-33-200-4966
Mounting Plate

332004966
19513300: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-108-5176
Retaining Band

331085176
78901590: RNCC: 3 | RNVC: 2
789015: RNCC: 5 | RNVC: 9

26 Mar 2001

5340-33-108-5431
Mounting Plate

331085431
9644.251.1910: RNCC: 3 | RNVC: 2
2510901329: RNCC: 5 | RNVC: 2
2510901329: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-204-8933
Mounting Bracket

332048933
51540-29F00: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-116-3931
Mounting Bracket

331163931
EV-2430: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-0461
Angle Bracket

330000461
H350GS/D021/5/I: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-200-2122
Mending Plate

332002122
J57166348-001: RNCC: 3 | RNVC: 2

5 Nov 2001

5340-33-102-2513
Strap End Clip

331022513
1005-001725: RNCC: 3 | RNVC: 2

15 Jan 1991

5340-33-002-5045
Access Cover

330025045
212-11153-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-126-9034
Angle Bracket

331269034
20804006-6: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-209-3304
Angle Bracket

332093304
MAM-XFRE-01-00-11: RNCC: 3 | RNVC: 2

5 Oct 2011

5340-33-203-5235
Mounting Bracket

332035235
200124006: RNCC: 3 | RNVC: 2
200124006: RNCC: 5 | RNVC: 2
3110-33-M32-7289: RNCC: 6 | RNVC: 9

7 May 2004

5340-33-209-7783
Utility Guard Rail Section

332097783
0664.20.7003.00: RNCC: 3 | RNVC: 2

23 Feb 2012

5340-33-206-2957
Angle Bracket

332062957
J57166502-004: RNCC: 3 | RNVC: 2

30 Oct 2007

5340-33-160-3662
Expansion Plug

331603662
EV-23100: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-4184
Mounting Bracket

332044184
W280698415201: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-201-2281
Rim Lock

332012281
2736.02.13: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-200-9777
Runner

332009777
2510008386: RNCC: 3 | RNVC: 2
2510008386: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-166-0431
Access Cover

331660431
BW-612: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-004-9109
Access Door Hinge

330049109
35-21350-2505: RNCC: 3 | RNVC: 2

15 Feb 2000

5340-33-001-3851
Retaining Strap

330013851
92020228: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-202-9867
Access Cover

332029867
223551807-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-157-8533
Angle Bracket

331578533
781638: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-5520
Access Cover

332015520
223561777-01: RNCC: 3 | RNVC: 2

2 Sep 2002

5340-33-002-8696
Door Handle

330028696
204147000: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-156-2822
Pipe Hanger

331562822
-92580-C6060: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-3752
Door Handle

331553752
197621: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-33-200-8050
Mounting Bracket

332008050
316402: RNCC: 3 | RNVC: 2

13 Mar 2002

5340-33-145-6113
Mounting Plate

331456113
TAB. D8-4: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-5395
Webbing Strap

332005395
600000002930: RNCC: 3 | RNVC: 2

4 Feb 2002

5340-33-188-8911
Access Cover

331888911
606902400101: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-003-7016
Access Cover

330037016
4110971210: RNCC: 3 | RNVC: 2
4110971210: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-33-201-1741
Access Cover

332011741
9644.251.6419: RNCC: 3 | RNVC: 2
2510901084: RNCC: 5 | RNVC: 2
2510901084: RNCC: 5 | RNVC: 2

24 May 2002

5340-33-211-2076
Mounting Plate

332112076
212-81261-04-1: RNCC: 3 | RNVC: 2

8 Jul 2013

5340-33-114-5061
Mounting Bracket

331145061
5TG 5-212: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-211-6397
Mounting Bracket

332116397
10-11300-0104: RNCC: 3 | RNVC: 2

19 Dec 2013

5340-33-001-8030
Access Cover

330018030
35-22831-0002-01: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-102-5917
Mounting Plate

331025917
656-H: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-2975
Catch Strike

330032975
212-22158-04-1: RNCC: 3 | RNVC: 2

9 Apr 1997

5340-33-201-0258
Mounting Bracket

332010258
3465010355: RNCC: 3 | RNVC: 2
3465010355: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-180-9061
Access Cover

331809061
112953: RNCC: 3 | RNVC: 2

25 Jul 1995

5340-33-002-6553
Handwheel

330026553
C-2150B-20-08: RNCC: 3 | RNVC: 2

15 Jun 1995

5340-33-003-3550
Pipe Hanger

330033550
11.12586-0033: RNCC: 3 | RNVC: 2

26 Jun 1997

5340-33-205-3875
Bolt And Spacer Kit

332053875
CBD56501G10: RNCC: 3 | RNVC: 2

11 Sep 2006

5340-33-206-0004
Angle Bracket

332060004
46669996: RNCC: 3 | RNVC: 2
46669996: RNCC: 5 | RNVC: 2

18 Jun 2007

5340-33-202-9168
Mounting Bracket

332029168
1025-901858: RNCC: 3 | RNVC: 2

28 Nov 2003

5340-33-103-4426
Access Cover

331034426
46 246 7BA: RNCC: 3 | RNVC: 2

3 May 1995

5340-33-107-9969
Angle Bracket

331079969
9644.250.0898: RNCC: 3 | RNVC: 2
1005006133: RNCC: 5 | RNVC: 2
1005006133: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-200-9127
Bridge Clamp

332009127
6285030: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-33-211-2955
Mounting Bracket

332112955
SP08509: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-33-126-5767
Rod End Connector

331265767
G38212-R-0700: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-187-5557
Loop Clamp

331875557
0201619-4: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-6960
Loop Clamp

330006960
583621: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-190-3884
Loop Clamp

331903884
2225: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-189-2305
Access Door Hinge

331892305
01210050: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-107-5712
Handwheel

331075712
M000000106: RNCC: 3 | RNVC: 2

27 Jan 2000

5340-33-202-9474
Mounting Bracket

332029474
W290675512100: RNCC: 3 | RNVC: 2

10 Dec 2003

5340-33-002-2758
Handle Grip

330022758
1055-000668: RNCC: 3 | RNVC: 2

13 Jun 1994

5340-33-180-7375
Angle Bracket

331807375
330237: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-001-4373
Access Cover

330014373
92026236: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-155-7715
Angle Bracket

331557715
318977: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-001-1775
Turnbuckle

330011775
35-62507-0501: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-102-0251
Retaining Strap

331020251
2510-000364: RNCC: 3 | RNVC: 2
2510000364: RNCC: 5 | RNVC: 2
411.097.1315: RNCC: 5 | RNVC: 2

6 Aug 1992

5340-33-155-9199
Mounting Bracket

331559199
314294: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-158-8961
Loop Clamp

331588961
-13100202-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-114-4868
Mounting Bracket

331144868
5.50 TTG-1: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-157-8028
Angle Bracket

331578028
698036: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-180-5294
Access Cover

331805294
111187: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-6975
Mounting Bracket

332016975
TOM0818952: RNCC: 3 | RNVC: 2

4 Oct 2002

5340-33-201-9711
Mounting Bracket

332019711
205124001: RNCC: 3 | RNVC: 2
205124001: RNCC: 5 | RNVC: 2

29 Nov 2002

5340-33-102-2940
Mounting Bracket

331022940
T976-A-10: RNCC: 3 | RNVC: 2

11 Jan 1991

5340-33-203-1089
Lock-Release Lever

332031089
1025-901738: RNCC: 3 | RNVC: 2

29 Jan 2004

5340-33-102-5913
Mounting Plate

331025913
259-B: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-3951
Mounting Bracket

332053951
3000689: RNCC: 3 | RNVC: 2

13 Sep 2006

5340-33-200-9805
Mounting Plate

332009805
2510008822: RNCC: 3 | RNVC: 2
2510008822: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-001-0674
Lock-Release Lever

330010674
35-46300-2803: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-158-9537
Angle Bracket

331589537
1806.07: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-33-203-5610
Utility Access Door

332035610
80020100: RNCC: 3 | RNVC: 2

25 May 2004

5340-33-107-4630
Angle Bracket

331074630
7356.252.0828: RNCC: 3 | RNVC: 2
2590001234: RNCC: 5 | RNVC: 2

15 Nov 1999

5340-33-103-1179
Mounting Bracket

331031179
375.090.0020: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-5181
Mending Plate

330045181
10205025-1: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-106-1855
Mounting Bracket

331061855
1777B4146/3.1.02: RNCC: 3 | RNVC: 2

18 Jun 1997

5340-33-200-9286
Clamp Bolt Assembly

332009286
35-21235-0007-50: RNCC: 3 | RNVC: 2

16 Apr 2002

5340-33-001-9965
Access Cover

330019965
35-24062-0005A01: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-203-9129
Buckle

332039129
739M/740H: RNCC: 3 | RNVC: 2
VM-CONCCAM: RNCC: 5 | RNVC: 2
450000000119: RNCC: 5 | RNVC: 2

10 Jan 2005

5340-33-189-2151
Access Cover

331892151
01090011: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-209-4636
Utility Guard Rail Section

332094636
0663.40.6000.00: RNCC: 3 | RNVC: 2

27 Dec 2011

5340-33-200-4565
Mechanical Stop

332004565
WW 458 633 -U: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-33-200-8635
Angle Bracket

332008635
7562.252.0254: RNCC: 3 | RNVC: 2

5 Apr 2002

5340-33-211-4739
Mounting Bracket

332114739
TOM0203111: RNCC: 3 | RNVC: 2
TOM0203111: RNCC: 3 | RNVC: 2

16 Nov 2013

5340-33-000-6966
Loop Clamp

330006966
592460: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-108-1435
Shimmy Damper

331081435
2197 2231-420: RNCC: 3 | RNVC: 2

16 Jan 2001

5340-33-108-6966
Mounting Plate

331086966
7058.252.0002: RNCC: 3 | RNVC: 2
2510701099: RNCC: 5 | RNVC: 2

14 Jun 2001

5340-33-180-8146
Shimmy Damper

331808146
589553: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-1078
Mounting Bracket

330011078
35-46774-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-108-0672
Lock Key

331080672
08086-20000: RNCC: 3 | RNVC: 2
08086-20000: RNCC: 5 | RNVC: 2

5 Dec 2000

5340-33-200-1467
Mounting Bracket

332001467
667338: RNCC: 3 | RNVC: 2
667338: RNCC: 5 | RNVC: 2

16 Oct 2001

5340-33-156-5017
Loop Clamp

331565017
-24222-89903: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-2592
Access Cover

331082592
9644.251.0920: RNCC: 3 | RNVC: 2
2510010000: RNCC: 5 | RNVC: 2
2510010000: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-107-4978
Angle Bracket

331074978
W290684501700: RNCC: 3 | RNVC: 2

1 Dec 1999

5340-33-116-8403
Mounting Plate

331168403
22 528: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-8309
Expansion Shield

330018309
20050-579E: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-159-9353
Access Cover

331599353
8426.15: RNCC: 3 | RNVC: 2

9 Oct 1995

5340-33-206-1191
Mounting Bracket

332061191
CBN60525P35: RNCC: 3 | RNVC: 2

21 Aug 2007

5340-33-001-4717
Angle Bracket

330014717
92026734: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-200-0379
Clevis And U-Bolt

332000379
723541732-01: RNCC: 3 | RNVC: 2

27 Sep 2001

5340-33-161-3013
Synchro Clamp

331613013
3090216749: RNCC: 3 | RNVC: 2
3090216749: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-33-206-2814
Clamping Catch

332062814
65340-41H00: RNCC: 3 | RNVC: 2
65340 41H00: RNCC: 5 | RNVC: 2

23 Oct 2007

5340-33-001-0401
Mounting Bracket

330010401
35-46000-1301: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-203-6720
Mounting Plate

332036720
XX9168503/2: RNCC: 3 | RNVC: 2

24 Jul 2004

5340-33-103-1583
Mounting Bracket

331031583
1240-000076: RNCC: 3 | RNVC: 2
3244: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-33-181-1163
Retaining Strap

331811163
-75800017-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-000-7068
Retaining Band

330007068
761142: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-187-5546
Loop Clamp

331875546
0201608-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-7645
Access Cover

331577645
566044: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-210-8263
Angle Bracket

332108263
TP252615: RNCC: 3 | RNVC: 2

22 Feb 2013

5340-33-002-1540
Mounting Bracket

330021540
317766: RNCC: 3 | RNVC: 2

1 Jul 1993

5340-33-001-4949
Compression Cup

330014949
92027611: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-004-6721
Access Cover

330046721
721118101: RNCC: 3 | RNVC: 2

27 Jul 1999

5340-33-158-9935
Bow Handle

331589935
00.430.427.WD: RNCC: 3 | RNVC: 2

24 Sep 1992

5340-33-126-4579
Bail Handle

331264579
702011022: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-155-2597
Mounting Plate

331552597
507126: RNCC: 3 | RNVC: 2
15100157: RNCC: 5 | RNVC: 9

28 Apr 1995

5340-33-202-0222
Cushioning Pad

332020222
723591761-01: RNCC: 3 | RNVC: 2

16 Dec 2002

5340-33-202-0235
Mounting Plate

332020235
723561302-01: RNCC: 3 | RNVC: 2

16 Dec 2002

5340-33-202-1640
Access Cover

332021640
223591736-01: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-33-003-3515
Mounting Bracket

330033515
11.12586-0034: RNCC: 3 | RNVC: 2

26 Jun 1997

5340-33-211-4740
Mounting Bracket

332114740
TOM0304103P01: RNCC: 3 | RNVC: 2
TOM0304103P01: RNCC: 3 | RNVC: 2

16 Nov 2013

5340-33-211-1848
Mounting Bracket

332111848
VR08030100: RNCC: 3 | RNVC: 2
VR08030100: RNCC: 3 | RNVC: 2

6 Jul 2013

5340-33-108-2563
Utility Access Door

331082563
9644.251.0780: RNCC: 3 | RNVC: 2
2510009747: RNCC: 5 | RNVC: 2
2510009747: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-201-9890
Mounting Bracket

332019890
1025900015: RNCC: 3 | RNVC: 2

9 Dec 2002

5340-33-103-5154
Retaining Strap

331035154
1443-24-25: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-205-1304
Support Hook

332051304
PS-911582: RNCC: 3 | RNVC: 2

9 May 2006

5340-33-004-1945
Angle Bracket

330041945
730096306: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-116-1591
Mounting Bracket

331161591
3 102 791: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-8170
Mounting Plate

331168170
102.011.065: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-105-0623
Mending Plate

331050623
PCT0030: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-211-2964
Angle Bracket

332112964
SP08680: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-33-106-8289
Access Cover

331068289
325064: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-154-5507
Retaining Strap

331545507
5340001079: RNCC: 3 | RNVC: 2
313296: RNCC: 3 | RNVC: 2
313296: RNCC: 5 | RNVC: 9

1 Oct 1990

5340-33-001-0985
Mounting Bracket

330010985
35-46671-0005: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-205-1579
Bolt And Spacer Kit

332051579
09116-06170: RNCC: 3 | RNVC: 2

19 May 2006

5340-33-201-4044
Mending Plate

332014044
A2810594-001: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-116-8594
Mounting Bracket

331168594
598/51-1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-0446
Padlock

332030446
20008: RNCC: 3 | RNVC: 2
5340900197: RNCC: 5 | RNVC: 2
20-AL: RNCC: 5 | RNVC: 2

20 Jan 2004

5340-33-106-4699
Access Cover

331064699
8143606: RNCC: 3 | RNVC: 2

6 Mar 1998

5340-33-102-1854
Mounting Bracket

331021854
52530000301: RNCC: 3 | RNVC: 2
52530000301: RNCC: 3 | RNVC: 2
MCL-5-30: RNCC: 5 | RNVC: 2
MCL-5-30: RNCC: 5 | RNVC: 2

8 Nov 1990

5340-33-004-2762
Angle Bracket

330042762
730030213: RNCC: 3 | RNVC: 2

25 Nov 1998

5340-33-202-7014
Mounting Bracket

332027014
9673.250.7800: RNCC: 3 | RNVC: 2
2510901818: RNCC: 5 | RNVC: 2
2510901818: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-108-4438
Mounting Bracket

331084438
9644.250.8320: RNCC: 3 | RNVC: 2
2540001058: RNCC: 5 | RNVC: 2
2540001058: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-200-8023
Loop Clamp

332008023
191151083: RNCC: 3 | RNVC: 2

12 Mar 2002

5340-33-000-1032
Strapping

330001032
H350GS/D124: RNCC: 1 | RNVC: 2

14 Jul 1986

5340-33-001-1638
Mounting Bracket

330011638
35-61117-0201: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-103-2271
Mounting Plate

331032271
2590-000134: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-4929
Turnbuckle

332114929
40-1/2-GANCHO-CANCAMO: RNCC: 3 | RNVC: 2

21 Nov 2013

5340-33-000-6692
Retaining Strap

330006692
630013: RNCC: 1 | RNVC: 2

7 Sep 1988

5340-33-106-8936
Access Cover

331068936
7356.592.0014: RNCC: 3 | RNVC: 2
2510009033: RNCC: 5 | RNVC: 2

5 Apr 1999

5340-33-108-0354
Bridge Clamp

331080354
318862: RNCC: 3 | RNVC: 2

4 Dec 2000

5340-33-107-9195
Expansion Plug

331079195
X32416105: RNCC: 3 | RNVC: 2

26 Sep 2000

5340-33-001-9191
Expansion Shield

330019191
20050-57FC: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-201-7936
Mounting Bracket

332017936
319664: RNCC: 3 | RNVC: 2

24 Oct 2002

5340-33-200-7988
Hinge Torsion Bar

332007988
322061: RNCC: 3 | RNVC: 2

12 Mar 2002

5340-33-154-6548
Loop Clamp

331546548
740396: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-106-5322
Mounting Plate

331065322
A0203050: RNCC: 3 | RNVC: 2

8 Apr 1998

5340-33-106-5962
Mounting Bracket

331065962
41000093: RNCC: 3 | RNVC: 2

4 Sep 1998

5340-33-158-1866
Angle Bracket

331581866
610925: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-102-3026
Latch Bar

331023026
T976-3A-A-11: RNCC: 3 | RNVC: 2

11 Jan 1991

5340-33-001-0825
Mounting Bracket

330010825
35-46443-0002: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-107-9099
Access Cover

331079099
61.11.195: RNCC: 3 | RNVC: 2

13 Sep 2000

5340-33-204-1651
Mending Plate

332041651
2540901571: RNCC: 3 | RNVC: 2

19 Apr 2005

5340-33-155-7467
Mending Plate

331557467
313262: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-106-6496
Access Cover

331066496
194036: RNCC: 3 | RNVC: 2

3 Dec 1998

5340-33-106-1361
Mounting Plate

331061361
631 630 17 48: RNCC: 3 | RNVC: 2

7 Apr 1997

5340-33-104-9133
Access Cover

331049133
556783: RNCC: 3 | RNVC: 2

12 Sep 1995

5340-33-156-4642
Rod End Connector

331564642
-54471-Y9500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-2423
Access Cover

331082423
9644.250.1170: RNCC: 3 | RNVC: 2
2510006865: RNCC: 5 | RNVC: 2
2510006865: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-202-5297
Access Cover

332025297
MHC2130200: RNCC: 3 | RNVC: 2
MHC1130200: RNCC: 5 | RNVC: 2

4 Aug 2003

5340-33-157-0115
Access Cover

331570115
-76831-G2591: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-5219
Access Cover

331555219
683101: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-201-4518
Mending Plate

332014518
RAL-200-4-6-7: RNCC: 3 | RNVC: 2

22 Jul 2002

5340-33-157-0140
Access Cover

331570140
-19240-G5500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-8182
Mounting Plate

332048182
5035546: RNCC: 3 | RNVC: 2

6 Feb 2006

5340-33-116-6388
Loop Clamp

331166388
24X30: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-160-3830
Door Closer

331603830
95.630.570: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-4449
Webbing Strap

331084449
9644.250.6303: RNCC: 3 | RNVC: 2
2540001222: RNCC: 5 | RNVC: 2
2540001222: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-000-9685
Access Cover

330009685
35-13325-0501: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-1976
Mounting Bracket

330011976
35-66578-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-201-9851
Access Cover

332019851
223591747-01: RNCC: 3 | RNVC: 2

5 Dec 2002

5340-33-202-0227
Mounting Bracket

332020227
223591704-01: RNCC: 3 | RNVC: 2

16 Dec 2002

5340-33-106-5135
Mounting Bracket

331065135
1777B021.04.02.01: RNCC: 3 | RNVC: 2

3 Apr 1998

5340-33-155-0034
Hinged Hasp

331550034
630209: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-2126
Rim Lock Set

332042126
PCAMI/RP/27A0501050: RNCC: 3 | RNVC: 2

16 May 2005

5340-33-108-0483
Mounting Bracket

331080483
9644.281.5190: RNCC: 3 | RNVC: 2
2910000444: RNCC: 5 | RNVC: 2
2910000444: RNCC: 5 | RNVC: 2

11 Dec 2000

5340-33-205-3952
Loop Clamp

332053952
3017967: RNCC: 3 | RNVC: 2

13 Sep 2006

5340-33-201-4306
Turnbuckle Body

332014306
1025-901374: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-33-000-6708
Retaining Strap

330006708
770365: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-003-4126
Loop Clamp

330034126
R508-G25: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-204-9654
Mounting Plate

332049654
0219844: RNCC: 3 | RNVC: 2

1 Mar 2006

5340-33-204-1459
Angle Bracket Set

332041459
2540901477: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-33-206-5547
Utility Resilient Mount

332065547
906049: RNCC: 3 | RNVC: 2
906049: RNCC: 5 | RNVC: 2

4 Mar 2008

5340-33-114-4858
Drift Bolt

331144858
5.50 TTG-11: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-116-0715
Mechanical Stop

331160715
BV-11839000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-5532
Angle Bracket

332055532
95-25904-1602: RNCC: 3 | RNVC: 2

15 Dec 2006

5340-33-181-3595
Support Hook

331813595
-01201766-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-205-4010
Mounting Plate

332054010
5039779: RNCC: 3 | RNVC: 2
1.143.60.914: RNCC: 5 | RNVC: 2

14 Sep 2006

5340-33-108-5075
Access Cover

331085075
190405: RNCC: 3 | RNVC: 2

26 Mar 2001

5340-33-201-5856
Mounting Bracket

332015856
RAL-200-10-5: RNCC: 3 | RNVC: 2

5 Sep 2002

5340-33-001-0847
Mounting Bracket

330010847
35-46513-0008: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-002-8075
Ball Socket Seat

330028075
0004376863: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-189-2277
Mounting Bracket

331892277
01220010: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-8976
Mounting Bracket

332008976
W290698613300: RNCC: 3 | RNVC: 2

11 Apr 2002

5340-33-210-8718
Surface Bolt

332108718
PCAMI/AC/ACTO42A/12/9: RNCC: 3 | RNVC: 2
USP-HK-9: RNCC: 5 | RNVC: 2

17 Mar 2013

5340-33-207-1287
Utility Resilient Mount

332071287
120032: RNCC: 3 | RNVC: 2
M18084: RNCC: 5 | RNVC: 2

26 Nov 2008

5340-33-001-5661
Retaining Strap

330015661
92041391: RNCC: 3 | RNVC: 2

15 Nov 1989

5340-33-107-7917
Access Cover

331077917
61.11.125: RNCC: 3 | RNVC: 2

3 Aug 2000

5340-33-154-5690
Mending Plate

331545690
753273: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-181-7852
Handle Grip

331817852
-07701078-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-205-4009
Access Cover

332054009
5039746: RNCC: 3 | RNVC: 2
1.143.51.022.01: RNCC: 5 | RNVC: 2

14 Sep 2006

5340-33-200-1256
Bolt And Spacer Kit

332001256
WW 435 915 A: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-001-0813
Mounting Bracket

330010813
35-46438-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-0775
Mounting Bracket

330010775
35-46383-0102: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-155-9152
Mounting Bracket

331559152
310206: RNCC: 3 | RNVC: 2
310206: RNCC: 5 | RNVC: 9

29 Aug 1996

5340-33-155-9179
Mounting Bracket

331559179
313140: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-108-5544
Retaining Strap

331085544
9644.251.6136: RNCC: 3 | RNVC: 2
2540900347: RNCC: 5 | RNVC: 2
2540900347: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-126-4112
Loop Clamp

331264112
C39104-Z43-C1: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-108-4439
Retaining Strap

331084439
9644.250.8330: RNCC: 3 | RNVC: 2
2540001060: RNCC: 5 | RNVC: 2
2540001060: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-206-2689
Mounting Bracket

332062689
PCMSABMR108: RNCC: 3 | RNVC: 2

18 Oct 2007

5340-33-126-4210
Angle Bracket

331264210
C22156-N1000-C16: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-001-0398
Mounting Bracket

330010398
35-46000-1102: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-201-3113
Loop Clamp

332013113
08036-01414: RNCC: 3 | RNVC: 2

21 Jun 2002

5340-33-204-0316
Detent Plunger

332040316
9502.103.8160: RNCC: 3 | RNVC: 2
1010900146: RNCC: 5 | RNVC: 2

7 Feb 2005

5340-33-204-7222
Mounting Bracket

332047222
1005002563: RNCC: 3 | RNVC: 2

19 Dec 2005

5340-33-206-6700
Utility Resilient Mount

332066700
137174: RNCC: 3 | RNVC: 2
CONE TYPE 30 55SH: RNCC: 5 | RNVC: 2
0042164: RNCC: 5 | RNVC: 2

16 Apr 2008

5340-33-161-3843
Mounting Plate

331613843
630983: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-155-6407
Angle Bracket

331556407
757478: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-157-7773
Access Cover

331577773
600085: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-8018
Access Cover

331578018
696021: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-33-002-7094
Retaining Strap

330027094
0001789: RNCC: 3 | RNVC: 2

26 Jul 1995

5340-33-161-5112
Bow Handle

331615112
230058: RNCC: 3 | RNVC: 2

7 Mar 1994

5340-33-115-8165
Access Cover

331158165
92282218735: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-200-8269
Mounting Bracket

332008269
7061.252.0070: RNCC: 3 | RNVC: 2
2510700444: RNCC: 5 | RNVC: 2

18 Mar 2002

5340-33-205-5858
Mounting Plate

332055858
5030464: RNCC: 3 | RNVC: 2
1.108.72.043-A: RNCC: 5 | RNVC: 2

27 Dec 2006

5340-33-001-0141
Mounting Bracket

330010141
35-42331-0002: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-108-6004
Access Cover

331086004
204492: RNCC: 3 | RNVC: 2

30 Apr 2001

5340-33-106-4708
Access Cover

331064708
98403039: RNCC: 3 | RNVC: 2

6 Mar 1998

5340-33-200-8622
Angle Bracket

332008622
7562.252.0212: RNCC: 3 | RNVC: 2

5 Apr 2002

5340-33-115-8161
Access Cover

331158161
92290217626: RNCC: 3 | RNVC: 2

27 Apr 1995

5340-33-205-5873
Mounting Plate

332055873
5033986: RNCC: 3 | RNVC: 2
1.108.60.100.01-C: RNCC: 5 | RNVC: 2

27 Dec 2006

5340-33-182-0092
Loop Clamp

331820092
-79900014-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-0233
Mounting Bracket

332010233
2990900019: RNCC: 3 | RNVC: 2
2990900019: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-182-0056
Retaining Strap

331820056
-75700024-1: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-2698
Mounting Bracket

332002698
100403040200: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-33-206-3849
Mounting Bracket

332063849
90619800: RNCC: 3 | RNVC: 2

11 Dec 2007

5340-33-106-8379
Mounting Bracket

331068379
W290375201500: RNCC: 3 | RNVC: 2

5 Apr 1999

5340-33-200-5157
Mounting Bracket

332005157
322062: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-33-154-6073
Runner

331546073
194864: RNCC: 3 | RNVC: 2

1 Dec 1989

5340-33-106-6858
Permanent Magnet

331066858
4PP4083-6086G001: RNCC: 3 | RNVC: 2

18 Jan 1999

5340-33-203-8207
Mounting Bracket

332038207
40201651000: RNCC: 3 | RNVC: 2

9 Nov 2004

5340-33-188-9477
Rod End Clevis

331889477
1670230: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-33-206-4851
Access Cover

332064851
999093412: RNCC: 3 | RNVC: 2
999093412: RNCC: 5 | RNVC: 2

4 Feb 2008

5340-33-106-3099
Access Cover

331063099
6164-5: RNCC: 3 | RNVC: 2

4 Sep 1997

5340-33-181-7020
Mending Plate

331817020
-05600174-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-181-7842
Angle Bracket

331817842
-07700641-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-002-0115
Padlock

330020115
C.P.T.: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-33-104-7749
Synchro Clamp

331047749
6.3020.97.7.0055: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-6149
Angle Bracket

331166149
15 F-49: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-2148
Mending Plate

332002148
J57166551-002: RNCC: 3 | RNVC: 2

5 Nov 2001

5340-33-158-5604
Retaining Strap

331585604
SS-06-0077T: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-005-3405
Hook Handle

330053405
79014117: RNCC: 3 | RNVC: 2

2 Jul 2001

5340-33-201-5265
Mounting Plate

332015265
9644.101.0600: RNCC: 3 | RNVC: 2
1005006553: RNCC: 5 | RNVC: 2
1005006553: RNCC: 5 | RNVC: 2

22 Aug 2002

5340-33-102-1517
Mounting Bracket

331021517
B-3-20D: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-155-6981
Access Cover

331556981
772204: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-116-1517
Mounting Plate

331161517
101.202.06.00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-104-1303
Angle Bracket

331041303
2113-27: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-33-204-1274
Utility Access Door

332041274
M2.00013: RNCC: 3 | RNVC: 2

4 Apr 2005

5340-33-189-2329
Metal Grille

331892329
01610032: RNCC: 3 | RNVC: 2
PCAMI/1000001210032: RNCC: 5 | RNVC: 2

20 Jul 1995

5340-33-001-1963
Mounting Bracket

330011963
35-66549-0201: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-205-3223
Expansion Plug

332053223
DIN443-B32-MS63: RNCC: 3 | RNVC: 2
DIN443-B32-MS63: RNCC: 3 | RNVC: 2
DIN443-B32-MS63: RNCC: 5 | RNVC: 2
2990-33-R07-2858: RNCC: 6 | RNVC: 9

26 Jul 2006

5340-33-201-0005
Access Cover

332010005
2510901475: RNCC: 3 | RNVC: 2
2510901475: RNCC: 5 | RNVC: 2

22 Apr 2002

5340-33-201-0190
Mounting Plate

332010190
2910900084: RNCC: 3 | RNVC: 2
2910900084: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-201-0437
Loop Clamp

332010437
5340001636: RNCC: 3 | RNVC: 2
5340001636: RNCC: 5 | RNVC: 2

24 Apr 2002

5340-33-107-9771
Mounting Plate

331079771
9644.251.5627: RNCC: 3 | RNVC: 2
2590001214: RNCC: 5 | RNVC: 2
2590001214: RNCC: 5 | RNVC: 2

2 Nov 2000

5340-33-107-3547
Loop Clamp

331073547
527611: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-107-7403
Mounting Bracket

331077403
W290683122100: RNCC: 3 | RNVC: 2

19 May 2000

5340-33-003-4305
Mounting Bracket

330034305
159-528: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-004-7742
Strap Hinge

330047742
-06605096-0: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-33-108-3639
Mounting Plate

331083639
-73200147-1: RNCC: 3 | RNVC: 2

28 Feb 2001

5340-33-200-1309
Angle Bracket

332001309
324042: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-157-8664
Mending Plate

331578664
811351: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-001-1530
Mounting Bracket

330011530
35-56163-0103: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-116-8168
Retaining Strap

331168168
15 D-119: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-3847
Access Cover

332013847
723581716-01: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-33-108-2558
Mounting Plate

331082558
9644.251.0178: RNCC: 3 | RNVC: 2
2510009655: RNCC: 5 | RNVC: 2
2510009655: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-205-2162
Mounting Plate

332052162
CBD50524P16: RNCC: 3 | RNVC: 2

22 Jun 2006

5340-33-205-2137
Mounting Bracket

332052137
CBD50509P34: RNCC: 3 | RNVC: 2

22 Jun 2006

5340-33-156-5019
Loop Clamp

331565019
-46289-G2513: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-1376
Mounting Plate

332001376
056.193.301: RNCC: 3 | RNVC: 2

10 Oct 2001

5340-33-003-2459
Webbing Strap

330032459
221023550: RNCC: 3 | RNVC: 2

13 Feb 1997

5340-33-155-7531
Mending Plate

331557531
715571: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-126-6193
Mounting Plate

331266193
PT17354: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-8805
Bow Handle

332018805
T15D030100: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-33-155-7730
Angle Bracket

331557730
750521: RNCC: 3 | RNVC: 2
757942: RNCC: 5 | RNVC: 2

18 Oct 1990

5340-33-202-6433
Access Cover

332026433
9673.120.0250: RNCC: 3 | RNVC: 2
2510900597: RNCC: 5 | RNVC: 2
2510900597: RNCC: 5 | RNVC: 2

19 Sep 2003

5340-33-160-3791
Retaining Strap

331603791
73.84.857.015: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-5617
Clamping Catch

331085617
9644.810.0144: RNCC: 3 | RNVC: 2
5340000328: RNCC: 5 | RNVC: 2
5340000328: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-145-5641
Mounting Bracket

331455641
14-105: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-7759
Angle Bracket

332007759
BCL-020-A1I.62A: RNCC: 3 | RNVC: 2

11 Mar 2002

5340-33-201-9509
Access Cover

332019509
223591735-01: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-33-125-9776
Access Cover

331259776
F30087-K500-C3: RNCC: 3 | RNVC: 2

5 Oct 1995

5340-33-200-9754
Lock-Release Lever

332009754
2510008344: RNCC: 3 | RNVC: 2
2510008344: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-160-6201
Mounting Bracket

331606201
79.05.521.901: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-161-1348
Clamping Catch

331611348
04.207.091.00: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-000-7515
Angle Bracket

330007515
781670: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-200-9771
Runner

332009771
2510008370: RNCC: 3 | RNVC: 2
2510008370: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-001-3606
Mounting Bracket

330013606
92018232: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-160-4342
Mending Plate

331604342
95.598.672: RNCC: 3 | RNVC: 2

27 Nov 1995

5340-33-181-1146
Retaining Strap

331811146
-16439-G9501: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-107-4195
Mounting Plate

331074195
7062.412.0060: RNCC: 3 | RNVC: 2
2540700026: RNCC: 5 | RNVC: 2

15 Oct 1999

5340-33-000-6715
Retaining Strap

330006715
784939: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-114-3994
Mounting Bracket

331143994
WW 405778: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-211-5058
Access Cover

332115058
0226957: RNCC: 3 | RNVC: 2

23 Nov 2013

5340-33-201-8187
Utility Access Door

332018187
2510010237: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-201-6369
Handwheel

332016369
1025-900511: RNCC: 3 | RNVC: 2

20 Sep 2002

5340-33-154-0269
Butt Hinge

331540269
807555: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-211-2956
Mounting Bracket

332112956
SP08515: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-33-000-7470
Angle Bracket

330007470
502700: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-206-6482
Utility Access Door

332066482
CF 328 453 AU: RNCC: 3 | RNVC: 2

9 Apr 2008

5340-33-202-1373
Lock-Release Lever

332021373
5008010: RNCC: 3 | RNVC: 2

28 Jan 2003

5340-33-001-9994
Mounting Bracket

330019994
35-23113-0001: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-204-4153
Mounting Bracket

332044153
W280698406008: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-157-8594
Access Cover

331578594
803581: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-9137
Bridge Clamp

332039137
2510700443: RNCC: 3 | RNVC: 2
7356.252.0934: RNCC: 5 | RNVC: 2

11 Jan 2005

5340-33-202-9382
Mounting Plate

332029382
CBD56500P04: RNCC: 3 | RNVC: 2

2 Dec 2003

5340-33-201-6177
Angle Bracket

332016177
9644.251.0043: RNCC: 3 | RNVC: 2
2510009361: RNCC: 5 | RNVC: 2
2510009361: RNCC: 5 | RNVC: 2

16 Sep 2002

5340-33-200-1085
Mounting Bracket

332001085
7063.252.0630: RNCC: 3 | RNVC: 2
2510701250: RNCC: 5 | RNVC: 2

8 Oct 2001

5340-33-202-0284
Loop Clamp

332020284
1025-901294: RNCC: 3 | RNVC: 2

19 Dec 2002

5340-33-200-6485
Catch Strike

332006485
230264: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-33-190-3888
Loop Clamp

331903888
2271: RNCC: 3 | RNVC: 2

1 Aug 1995

Load More Results