What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 2 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 2 of 39

5340-33-108-2445
Mounting Bracket

331082445
9644.120.0280: RNCC: 3 | RNVC: 2
2510007038: RNCC: 5 | RNVC: 2
2510007038: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-154-0253
Butt Hinge

331540253
585875: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-000-6316
Loop Clamp

330006316
788603: RNCC: 1 | RNVC: 2

14 Jun 1988

5340-33-200-8238
Loop Clamp

332008238
7356.252.0865: RNCC: 3 | RNVC: 2
5340001793: RNCC: 5 | RNVC: 2

14 Mar 2002

5340-33-001-5014
Mounting Bracket

330015014
92027702: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-105-1155
Access Cover

331051155
579: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-158-8627
Access Cover

331588627
-01200683: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-9256
Mounting Bracket

331079256
7057.292.0010: RNCC: 3 | RNVC: 2
2510700059: RNCC: 5 | RNVC: 2

26 Sep 2000

5340-33-108-5184
Angle Bracket

331085184
8189380: RNCC: 3 | RNVC: 2

26 Mar 2001

5340-33-201-5857
Mounting Bracket

332015857
AMIV39000: RNCC: 3 | RNVC: 2

5 Sep 2002

5340-33-160-6454
Mounting Bracket

331606454
95.590.631: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-156-2179
Angle Bracket

331562179
-17370-Y9501: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-155-6930
Mending Plate

331556930
750504: RNCC: 3 | RNVC: 2
65100100: RNCC: 5 | RNVC: 9

18 Oct 1990

5340-33-160-0646
Retaining Strap

331600646
00.137.640.11: RNCC: 3 | RNVC: 2
00.128.634.11: RNCC: 5 | RNVC: 2

23 Nov 1995

5340-33-202-9976
Mending Plate

332029976
MHC2150340: RNCC: 3 | RNVC: 2
MHC1150340: RNCC: 5 | RNVC: 2

19 Dec 2003

5340-33-002-9778
Retaining Clip

330029778
0174853: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-204-1454
Access Cover

332041454
2510903806: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-33-203-2728
Mounting Bracket

332032728
9673.250.8040: RNCC: 3 | RNVC: 2
2540901444: RNCC: 5 | RNVC: 2
2540901444: RNCC: 5 | RNVC: 2

19 Feb 2004

5340-33-190-3949
Runner

331903949
1330-2000: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-211-1168
Latch Bar

332111168
0225811: RNCC: 3 | RNVC: 2

16 Jun 2013

5340-33-107-4676
Retaining Strap

331074676
322940: RNCC: 3 | RNVC: 2
322940: RNCC: 5 | RNVC: 2

15 Nov 1999

5340-33-203-2914
Detent Plunger

332032914
5033730: RNCC: 3 | RNVC: 2

24 Feb 2004

5340-33-203-3905
Filler Opening Cap

332033905
1182: RNCC: 3 | RNVC: 2

31 Mar 2004

5340-33-155-1881
Retaining Clip

331551881
41335: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-108-2449
Plain Solid Disk

331082449
9644.120.0054: RNCC: 3 | RNVC: 2
2510007051: RNCC: 5 | RNVC: 2
2510007051: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-161-3753
Rod Retainer Clip

331613753
618996: RNCC: 3 | RNVC: 2
618996: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-33-201-7777
Stand Base

332017777
D0931411858: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-33-205-0153
Antipilferage Seal

332050153
19658380: RNCC: 3 | RNVC: 2

31 Mar 2006

5340-33-157-7606
Access Cover

331577606
555439: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-8266
Angle Bracket

331168266
22 563: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-206-4161
Rod End Clevis

332064161
00055738: RNCC: 3 | RNVC: 2

28 Dec 2007

5340-33-205-0155
Angle Bracket

332050155
19623104: RNCC: 3 | RNVC: 2

31 Mar 2006

5340-33-000-7504
Angle Bracket

330007504
767865: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-002-1543
Mounting Bracket

330021543
318401: RNCC: 3 | RNVC: 2
318401: RNCC: 3 | RNVC: 2

1 Jul 1993

5340-33-157-7424
Access Cover

331577424
520084: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-7792
Angle Bracket

331577792
616742: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-5676
Retaining Strap

330015676
92042202: RNCC: 3 | RNVC: 2

15 Nov 1989

5340-33-201-0206
Access Cover

332010206
2920000102: RNCC: 3 | RNVC: 2
2920000102: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-180-7609
Loop Clamp

331807609
509412: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-205-4618
Mounting Plate

332054618
1025901931: RNCC: 3 | RNVC: 2
9743.100.0114: RNCC: 5 | RNVC: 2

19 Oct 2006

5340-33-158-1329
Doorknob

331581329
200174: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-202-2851
Loop Clamp

332022851
-24216-V5000: RNCC: 3 | RNVC: 2

20 Mar 2003

5340-33-204-9448
Angle Bracket

332049448
85201-G9500: RNCC: 3 | RNVC: 2

24 Feb 2006

5340-33-125-7162
Angle Bracket

331257162
702008001: RNCC: 3 | RNVC: 2

14 Sep 1995

5340-33-160-4328
Mending Plate

331604328
95.547.422: RNCC: 3 | RNVC: 2

27 Nov 1995

5340-33-204-8606
Mounting Plate

332048606
92106490121: RNCC: 3 | RNVC: 2

15 Feb 2006

5340-33-103-5119
Retaining Strap

331035119
1302: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-154-0247
Butt Hinge

331540247
507167: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-180-7765
Rod End Clevis

331807765
531394: RNCC: 3 | RNVC: 2
531394: RNCC: 6 | RNVC: 9

22 Oct 1996

5340-33-200-9904
Access Cover

332009904
2510901162: RNCC: 3 | RNVC: 2
2510901162: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-107-7100
Mounting Bracket

331077100
03-08: RNCC: 3 | RNVC: 2

17 Apr 2000

5340-33-104-8223
Mechanical Stop

331048223
1594300: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-189-2290
Mounting Bracket

331892290
0350020: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-204-1494
Utility Access Door

332041494
10040401000: RNCC: 3 | RNVC: 2

14 Apr 2005

5340-33-154-5520
Retaining Strap

331545520
319480: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-204-9321
Roller Holder

332049321
40081625100: RNCC: 3 | RNVC: 2

23 Feb 2006

5340-33-108-4460
Utility Access Door

331084460
9644.251.5110: RNCC: 3 | RNVC: 2
2540001282: RNCC: 5 | RNVC: 2
2540001282: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-108-6981
Mounting Plate

331086981
7059.252.0033: RNCC: 3 | RNVC: 2
2510700706: RNCC: 5 | RNVC: 2

14 Jun 2001

5340-33-181-0283
Access Cover

331810283
-21013-61502: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-205-2136
Mounting Bracket

332052136
CBD50509P78: RNCC: 3 | RNVC: 2

22 Jun 2006

5340-33-126-1439
Mounting Bracket

331261439
8866.53: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-7397
Access Cover

331577397
512184: RNCC: 3 | RNVC: 2
35100016: RNCC: 5 | RNVC: 9

28 Apr 1995

5340-33-187-5220
Leather Strap

331875220
302648: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-000-7032
Loop Clamp

330007032
3090213449: RNCC: 3 | RNVC: 2

9 Sep 1988

5340-33-204-5593
Key Blank

332045593
11.096: RNCC: 3 | RNVC: 2
11.096: RNCC: 5 | RNVC: 2

17 Oct 2005

5340-33-201-6997
Retaining Strap

332016997
9644.101.0750: RNCC: 3 | RNVC: 2
1005006648: RNCC: 5 | RNVC: 2
1005006648: RNCC: 5 | RNVC: 2

4 Oct 2002

5340-33-001-5021
Mounting Bracket

330015021
92027709: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-202-6637
Mounting Bracket

332026637
9673.250.0339: RNCC: 3 | RNVC: 2
2510901354: RNCC: 5 | RNVC: 2
2510901354: RNCC: 5 | RNVC: 2

24 Sep 2003

5340-33-116-8295
Bridge Clamp

331168295
22 559: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-6739
Access Cover

332006739
WQ 483 680 AT: RNCC: 3 | RNVC: 2

22 Feb 2002

5340-33-205-9878
Access Cover

332059878
0840226070000: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-33-003-6337
Access Cover

330036337
0134666: RNCC: 3 | RNVC: 2

26 May 1998

5340-33-107-4316
Angle Bracket

331074316
W290683109800: RNCC: 3 | RNVC: 2

14 Oct 1999

5340-33-204-4081
Access Cover

332044081
500.011.00: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-205-2134
Mounting Bracket

332052134
CBD50509P36: RNCC: 3 | RNVC: 2

22 Jun 2006

5340-33-126-2325
Loop Clamp

331262325
RN-SL49: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-33-201-0188
Access Cover

332010188
2910000488: RNCC: 3 | RNVC: 2
2910000488: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-001-4943
Access Cover

330014943
92027605: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-002-0094
Padlock

330020094
105A: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-33-107-1860
Mounting Bracket

331071860
330316: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-106-8884
Mounting Bracket

331068884
7356.292.1030: RNCC: 3 | RNVC: 2
2930700010: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-107-0964
Loop Clamp

331070964
239600: RNCC: 3 | RNVC: 2
239600: RNCC: 6 | RNVC: 9

6 Jul 1999

5340-33-211-1837
Door Handle

332111837
VR06020500: RNCC: 3 | RNVC: 2
VR06020500: RNCC: 3 | RNVC: 2

6 Jul 2013

5340-33-203-1935
Retaining Strap

332031935
9673.290.5134: RNCC: 3 | RNVC: 2
2910900118: RNCC: 5 | RNVC: 2
2910900118: RNCC: 5 | RNVC: 2

13 Feb 2004

5340-33-200-8625
Angle Bracket

332008625
7562.252.0214: RNCC: 3 | RNVC: 2

5 Apr 2002

5340-33-001-5205
Access Cover

330015205
92030406: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-202-6087
Access Cover

332026087
341055010: RNCC: 3 | RNVC: 2
341055010: RNCC: 5 | RNVC: 2

4 Sep 2003

5340-33-106-7481
Mending Plate

331067481
1005.002328: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-201-3798
Mounting Bracket

332013798
EMAC045041: RNCC: 3 | RNVC: 2

2 Jul 2002

5340-33-155-8971
Angle Bracket

331558971
313292: RNCC: 3 | RNVC: 2
5340001076: RNCC: 3 | RNVC: 2
313292: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-108-4729
Mounting Plate

331084729
9644.590.5002: RNCC: 3 | RNVC: 2
5975000907: RNCC: 5 | RNVC: 2
5975000907: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-200-1071
Access Cover

332001071
7063.252.0390: RNCC: 3 | RNVC: 2
2510701227: RNCC: 5 | RNVC: 2

8 Oct 2001

5340-33-002-5004
Leather Strap

330025004
CA172: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-108-4356
Access Cover

331084356
9644.591.5065: RNCC: 3 | RNVC: 2
2510900087: RNCC: 5 | RNVC: 2
2510900087: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-107-3088
Access Cover

331073088
21124816000: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-103-1183
Mounting Bracket

331031183
375.090.0190: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-5010
Angle Bracket

331075010
W290684506100: RNCC: 3 | RNVC: 2

17 Apr 2000

5340-33-106-1383
Retaining Clip

331061383
000 831 06 83: RNCC: 3 | RNVC: 2

7 Apr 1997

5340-33-205-6549
Mounting Bracket

332056549
5306900094: RNCC: 3 | RNVC: 2
9743.100.0101: RNCC: 5 | RNVC: 2

5 Feb 2007

5340-33-158-8626
Access Cover

331588626
-01200349: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-1396
Mounting Bracket

332011396
7054.252.1550: RNCC: 3 | RNVC: 2
6530700020: RNCC: 5 | RNVC: 2

16 May 2002

5340-33-181-1164
Retaining Strap

331811164
-76918-G971X: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-204-0500
Strap Fastener Loop

332040500
171PLAST02: RNCC: 3 | RNVC: 2
4300000000FT8: RNCC: 5 | RNVC: 2

16 Feb 2005

5340-33-157-8715
Angle Bracket

331578715
814695: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-156-2162
Angle Bracket

331562162
-10006-V5700: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-116-8393
Retaining Clip

331168393
AT: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-200-8014
Loop Clamp

332008014
191151554: RNCC: 3 | RNVC: 2

12 Mar 2002

5340-33-201-6977
Mounting Bracket

332016977
TOM0818954: RNCC: 3 | RNVC: 2

4 Oct 2002

5340-33-154-6523
Loop Clamp

331546523
318274: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-107-9527
Synchro Clamp

331079527
SP08887: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-33-107-0962
Loop Clamp

331070962
242127: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-205-6550
Mounting Bracket

332056550
1025900187: RNCC: 3 | RNVC: 2
9682.101.0670: RNCC: 5 | RNVC: 2

5 Feb 2007

5340-33-157-8153
Angle Bracket

331578153
735886: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-8268
Access Cover

331068268
600253: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-203-5522
Utility Access Door

332035522
80060018: RNCC: 3 | RNVC: 2

25 May 2004

5340-33-202-3535
Mounting Bracket

332023535
W290609531000: RNCC: 3 | RNVC: 2

21 Apr 2003

5340-33-201-6514
Mounting Bracket

332016514
1025-900681: RNCC: 3 | RNVC: 2

23 Sep 2002

5340-33-154-3826
Access Cover

331543826
194514: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-206-1845
Mounting Plate

332061845
CBD58505P01: RNCC: 3 | RNVC: 2

20 Sep 2007

5340-33-108-5494
Mounting Plate

331085494
9644.251.5408: RNCC: 3 | RNVC: 2
2540001332: RNCC: 5 | RNVC: 2
2540001332: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-001-3238
Bumper

330013238
92011034: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-155-6398
Angle Bracket

331556398
756954: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-154-0566
Mending Plate

331540566
809118: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-154-6935
Angle Bracket

331546935
738562: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-155-7691
Angle Bracket

331557691
320712: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-157-0208
Access Cover

331570208
-87616-Y9500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-7475
Angle Bracket

330007475
533756: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-003-7778
Mounting Plate

330037778
SE127128013B: RNCC: 3 | RNVC: 2

5 Jun 1998

5340-33-200-9941
Rim Latch

332009941
2510901365: RNCC: 3 | RNVC: 2
2510901365: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-000-6970
Loop Clamp

330006970
634327: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-107-4474
Retaining Strap

331074474
W280677500022: RNCC: 3 | RNVC: 2

13 Oct 1999

5340-33-106-8871
Mounting Bracket

331068871
7356.252.0719: RNCC: 3 | RNVC: 2
2510011176: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-106-8882
Mounting Bracket

331068882
7356.592.0018: RNCC: 3 | RNVC: 2
2510009049: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-108-2588
Mounting Bracket

331082588
9644.251.0690: RNCC: 3 | RNVC: 2
2510009956: RNCC: 5 | RNVC: 2
2510009956: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-203-9233
Access Cover

332039233
209051530: RNCC: 3 | RNVC: 2

19 Jan 2005

5340-33-160-0651
Retaining Strap

331600651
97.501.533.80: RNCC: 3 | RNVC: 2

23 Nov 1995

5340-33-202-9930
Blank Panel

332029930
223552102-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-202-6498
Access Cover

332026498
222422512-01: RNCC: 3 | RNVC: 2

22 Sep 2003

5340-33-203-8611
Mounting Bracket

332038611
CBD50515P04: RNCC: 3 | RNVC: 2

11 Dec 2004

5340-33-115-6080
Plain Solid Disk

331156080
10205002050: RNCC: 3 | RNVC: 2

27 Apr 1995

5340-33-155-9177
Mounting Bracket

331559177
313133: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-157-8758
Angle Bracket

331578758
818041: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-2860
Hinge Torsion Bar

332112860
L10013: RNCC: 3 | RNVC: 2

9 Aug 2013

5340-33-106-6535
Retaining Strap

331066535
SHN2020860: RNCC: 3 | RNVC: 2

22 Dec 1998

5340-33-154-6538
Loop Clamp

331546538
551305: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-116-4488
Loop Clamp

331164488
92210627370: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-33-157-7249
Access Cover

331577249
318208: RNCC: 3 | RNVC: 2
318208: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-1155
Angle Bracket

332111155
0220282: RNCC: 3 | RNVC: 2

16 Jun 2013

5340-33-004-2867
Angle Bracket

330042867
NN60199G01: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-107-6461
Retaining Strap

331076461
7051.252.0011: RNCC: 3 | RNVC: 2
2510700412: RNCC: 5 | RNVC: 2

17 Apr 2000

5340-33-200-9765
Runner

332009765
2510008364: RNCC: 3 | RNVC: 2
2510008364: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-107-0664
Mounting Bracket

331070664
T501100200: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-33-204-4603
Mounting Bracket

332044603
CBD50503P27: RNCC: 3 | RNVC: 2

16 Sep 2005

5340-33-001-3695
Mounting Bracket

330013695
92019232: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-181-1416
Mounting Plate

331811416
-65185-G970X: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-108-4363
Access Cover

331084363
9644.251.8850: RNCC: 3 | RNVC: 2
2510900347: RNCC: 5 | RNVC: 2
2510900347: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-000-0623
Angle Bracket

330000623
9.325.1.601.006.4: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-204-8079
Handwheel

332048079
39286-7: RNCC: 3 | RNVC: 2
482033M000187: RNCC: 6 | RNVC: 9

1 Feb 2006

5340-33-206-1916
Mounting Bracket

332061916
PN3110834-1: RNCC: 3 | RNVC: 2

21 Sep 2007

5340-33-181-7834
Mounting Plate

331817834
-07700592-2: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-2297
Mounting Bracket

330012297
35-82200-0201: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-200-2030
Butt Hinge

332002030
J57167788-401: RNCC: 3 | RNVC: 2

5 Nov 2001

5340-33-190-5714
Mounting Plate

331905714
S43312199-001: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-002-5001
Leather Strap

330025001
CA36700-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-203-3952
Loop Clamp

332033952
93524-3: RNCC: 3 | RNVC: 2

1 Apr 2004

5340-33-116-8590
Mounting Bracket

331168590
598/4: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-106-8337
Door Handle

331068337
-01606329-1: RNCC: 3 | RNVC: 2

5 Apr 1999

5340-33-181-8889
Rod End Clevis

331818889
-16300170-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-107-0328
Access Door Hinge

331070328
9083918: RNCC: 3 | RNVC: 2

25 May 1999

5340-33-154-5667
Mending Plate

331545667
315927: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-105-8759
Expansion Plug

331058759
1302.02: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-33-202-0781
Mounting Bracket

332020781
CCTM024800: RNCC: 3 | RNVC: 2

3 Jan 2003

5340-33-201-6370
Corner Brace

332016370
1025-901710: RNCC: 3 | RNVC: 2

20 Sep 2002

5340-33-107-8989
Access Cover

331078989
61.11.196: RNCC: 3 | RNVC: 2

13 Sep 2000

5340-33-203-6882
Recess Handle

332036882
2123010320: RNCC: 3 | RNVC: 2

24 Aug 2004

5340-33-106-8856
Angle Bracket

331068856
7356.592.0013: RNCC: 3 | RNVC: 2
2510009034: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-192-3779
Retaining Strap

331923779
141.125: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-157-8446
Blank Panel

331578446
753812: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-5927
T Bracket

332115927
D0941510115: RNCC: 3 | RNVC: 2

6 Dec 2013

5340-33-106-8288
Access Cover

331068288
7356.292.0890: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-108-4978
Retaining Bail

331084978
99.08.61: RNCC: 3 | RNVC: 2

26 Mar 2001

5340-33-154-0399
Synchro Clamp

331540399
579247: RNCC: 3 | RNVC: 2
579247: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-33-157-7554
Angle Bracket

331577554
547903: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-181-6018
Handle Grip

331816018
-01300537-1: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-204-0551
Mounting Bracket

332040551
GAEG140000: RNCC: 3 | RNVC: 2

22 Feb 2005

5340-33-154-2218
Mending Plate

331542218
554053: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-107-2366
Mounting Bracket

331072366
-01700159-2: RNCC: 3 | RNVC: 2

14 Sep 1999

5340-33-154-3829
Access Cover

331543829
526815: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-154-2215
Mending Plate

331542215
515210: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-001-0000
Angle Bracket

330010000
35-31278-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-105-1265
Mortise Latch Set

331051265
CMH95200-1/5-6-7-8: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-201-5260
Mounting Plate

332015260
9644.100.0071: RNCC: 3 | RNVC: 2
1005005221: RNCC: 5 | RNVC: 2
1005005221: RNCC: 5 | RNVC: 2

22 Aug 2002

5340-33-106-2089
Mechanical Stop

331062089
712583: RNCC: 3 | RNVC: 2
712583: RNCC: 6 | RNVC: 9

24 Oct 1997

5340-33-157-8464
Access Cover

331578464
754725: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-4151
Loop Clamp

331544151
3090201411: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-001-3722
Retaining Strap

330013722
92019327: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-200-8607
Mounting Plate

332008607
7356.252.0626: RNCC: 3 | RNVC: 2

5 Apr 2002

5340-33-201-5261
Mounting Plate

332015261
9644.100.0072: RNCC: 3 | RNVC: 2
1005005222: RNCC: 5 | RNVC: 2
1005005222: RNCC: 5 | RNVC: 2

22 Aug 2002

5340-33-202-7062
Utility Access Door

332027062
9673.290.5120: RNCC: 3 | RNVC: 2
2910900055: RNCC: 5 | RNVC: 2
2910900055: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-200-0146
Rod End Clevis

332000146
CBD50517G01: RNCC: 3 | RNVC: 2

24 Sep 2001

5340-33-200-5932
Mounting Plate

332005932
WW 486 845 A: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-002-0113
Padlock

330020113
C.P.G.C: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-33-200-2699
Access Door Hinge

332002699
100404020500: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-33-157-7488
Access Cover

331577488
536885: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-0539
Access Cover

331160539
BA-17226001: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-5538
Retaining Strap

331545538
578524: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-211-0085
Access Cover

332110085
27421001: RNCC: 3 | RNVC: 2

10 May 2013

5340-33-001-3281
Compression Cup

330013281
92012119: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-200-2649
Mounting Bracket

332002649
100351300002: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-33-103-1590
Mounting Bracket

331031590
471-091-0701: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-7888
Bumper

330007888
MBCE-4-71: RNCC: 3 | RNVC: 2
220901045: RNCC: 5 | RNVC: 2

2 Dec 1988

5340-33-108-6063
Retaining Strap

331086063
22356-12: RNCC: 3 | RNVC: 2

30 Apr 2001

5340-33-001-1589
Rod End Clevis

330011589
35-56361-0301: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-000-0405
Rim Latch

330000405
H350GS/D021/40: RNCC: 1 | RNVC: 2

13 Mar 1997

5340-33-106-5327
Retaining Strap

331065327
C0601030: RNCC: 3 | RNVC: 2
PCAMI/RP/32C0601030: RNCC: 4 | RNVC: 1
060103: RNCC: 5 | RNVC: 1

13 Apr 1998

5340-33-201-2045
T Bracket

332012045
87717-3MAS: RNCC: 3 | RNVC: 2

30 May 2002

5340-33-005-1002
Mounting Bracket

330051002
1005.002097: RNCC: 3 | RNVC: 2
1005-002097: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-33-103-2412
Mounting Plate

331032412
1055-000324: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-9553
Access Cover

332019553
723591773-01: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-33-202-9037
Access Cover

332029037
723551387-01: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-115-8652
Loop Clamp

331158652
2.1/2": RNCC: 3 | RNVC: 2

14 Nov 1992

5340-33-002-0013
Mounting Bracket

330020013
35-82287-0101: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-145-6114
Mounting Plate

331456114
TAB. D8-14: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-3443
Access Cover

332053443
CGD-11101101-01: RNCC: 3 | RNVC: 2

17 Aug 2006

5340-33-001-8031
Access Cover

330018031
35-22836-0001-01: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-102-1654
Mounting Bracket

331021654
MBCE-4-77: RNCC: 3 | RNVC: 2
MBCE-4-77: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-000-3026
Handle Grip

330003026
4925-000017: RNCC: 3 | RNVC: 2

8 Sep 1987

5340-33-201-3861
Access Cover

332013861
723581331-01: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-33-202-9872
Access Cover

332029872
223551812-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-107-1821
Door Handle

331071821
3850111: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-116-6150
Angle Bracket

331166150
15-K-25: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-200-5805
Stand Base

332005805
1406560: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-33-157-7995
Blank Panel

331577995
682260: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-102-5908
Friction Catch

331025908
274-C: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-8441
Retaining Band

332028441
89.28.54: RNCC: 3 | RNVC: 2

11 Nov 2003

5340-33-115-9493
Shimmy Damper

331159493
6.308.0.703.001.4: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-6868
Utility Access Door

332036868
2123010230: RNCC: 3 | RNVC: 2

24 Aug 2004

5340-33-200-2700
Thumb Latch

332002700
100404020700: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-33-108-0141
Retaining Strap

331080141
9644.250.5613: RNCC: 3 | RNVC: 2
2540000670: RNCC: 5 | RNVC: 2
2540000670: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-155-7491
Mending Plate

331557491
314503: RNCC: 3 | RNVC: 2
314503: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-154-5684
Mending Plate

331545684
738344: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-156-2334
Angle Bracket

331562334
-51025-G9500: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-160-7492
Retaining Clip

331607492
5.413.588: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-203-1791
Mounting Bracket

332031791
9673.250.6610: RNCC: 3 | RNVC: 2
2540900839: RNCC: 5 | RNVC: 2
2540900839: RNCC: 5 | RNVC: 2

11 Feb 2004

5340-33-161-3056
Expansion Plug

331613056
3340803049: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-1231
Access Cover

332001231
324146: RNCC: 3 | RNVC: 2

8 Oct 2001

5340-33-154-0679
Door Holder

331540679
818983: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-000-6675
Retaining Strap

330006675
555400: RNCC: 1 | RNVC: 2

6 Sep 1988

5340-33-202-6594
Mounting Plate

332026594
9673.250.0199: RNCC: 3 | RNVC: 2
2510900727: RNCC: 5 | RNVC: 2
2510900727: RNCC: 5 | RNVC: 2

23 Sep 2003

5340-33-200-8681
Permanent Magnet

332008681
U 0927: RNCC: 3 | RNVC: 2

5 Apr 2002

5340-33-200-4217
Mounting Plate

332004217
WG 306 416 B: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-105-9636
Mechanical Stop

331059636
1.120.27.10.000: RNCC: 3 | RNVC: 2

19 Sep 1996

5340-33-115-6079
Plain Solid Disk

331156079
92282218714: RNCC: 3 | RNVC: 2

27 Apr 1995

5340-33-001-4937
Expansion Plug

330014937
92027590: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-108-3320
Retaining Strap

331083320
SP07264: RNCC: 3 | RNVC: 2

13 Feb 2001

5340-33-001-2771
Loop Clamp

330012771
CAN67282D5: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-106-7745
Mounting Bracket

331067745
34803: RNCC: 3 | RNVC: 2
4350073: RNCC: 5 | RNVC: 2

15 Mar 1999

5340-33-115-9373
Access Cover

331159373
6.0690.31.1.1313: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-115-8653
Loop Clamp

331158653
20-32: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-33-155-7753
Angle Bracket

331557753
566470: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-200-3874
Mounting Bracket

332003874
CF 333 179 A: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-145-5659
Mounting Bracket

331455659
78-065: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-158-2222
Retaining Clip

331582222
0216510-1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-4314
Expansion Plug

330014314
92026110: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-102-1861
Mounting Bracket

331021861
42630004020: RNCC: 3 | RNVC: 2
42630004020: RNCC: 3 | RNVC: 2
MC51-8-2: RNCC: 3 | RNVC: 2
MC51-8-2: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-116-6142
Mending Plate

331166142
15 P-95: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-105-2803
Loop Clamp

331052803
-04200324-0: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-114-5108
Mounting Bracket

331145108
6 ILA 1-2: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-116-6392
Loop Clamp

331166392
543.2.002: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-003-4289
Mounting Plate

330034289
159-268: RNCC: 3 | RNVC: 2
SP159-268: RNCC: 5 | RNVC: 1

5 Sep 1997

5340-33-202-9574
Access Cover

332029574
223552773-01: RNCC: 3 | RNVC: 2
223552773: RNCC: 5 | RNVC: 1

15 Dec 2003

5340-33-202-1641
Cushioning Pad

332021641
723561718-01: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-33-001-8847
Expansion Shield

330018847
C-20050-6-0-I-03-19: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-202-9869
Mounting Bracket

332029869
223551809-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-202-4945
Mounting Plate

332024945
722422851-01: RNCC: 3 | RNVC: 2

18 Jul 2003

5340-33-160-3679
Retaining Strap

331603679
NM-4519: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3222
Compression Cup

330013222
92011013: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-157-0239
Access Cover

331570239
-13035-H1000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-104-6562
Catch Strike

331046562
92.990.12.14.05: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-33-200-2677
Access Door Hinge

332002677
100402070300: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-33-108-4181
Mounting Bracket

331084181
9644.250.1660: RNCC: 3 | RNVC: 2
1005005983: RNCC: 5 | RNVC: 2
1005005983: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-114-4842
Bail Handle

331144842
10 ILA 8-42: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-106-3224
Door Holder

331063224
BN-61705: RNCC: 3 | RNVC: 2
-61705-0: RNCC: 5 | RNVC: 2

5 Sep 1997

5340-33-102-2932
Runner

331022932
G976-C-5: RNCC: 3 | RNVC: 2

11 Jan 1991

5340-33-106-6207
Detent Plunger

331066207
U 1436: RNCC: 3 | RNVC: 2

12 Nov 1998

5340-33-205-4035
Mounting Plate

332054035
5041070: RNCC: 3 | RNVC: 2
1.143.60.930: RNCC: 5 | RNVC: 2

14 Sep 2006

5340-33-106-3085
Access Cover

331063085
9 001 140 323: RNCC: 3 | RNVC: 2

4 Sep 1997

5340-33-200-9149
Access Cover

332009149
709035205: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-33-108-5429
Catch Strike

331085429
9644.251.0519: RNCC: 3 | RNVC: 2
2510901305: RNCC: 5 | RNVC: 2
2510901305: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-157-8540
Mending Plate

331578540
783458: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-001-3953
Access Cover

330013953
92020527: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-161-7029
Padlock

331617029
301/30: RNCC: 3 | RNVC: 2
F12101010: RNCC: 5 | RNVC: 2

26 Apr 1995

5340-33-108-6979
Mounting Plate

331086979
7059.252.0012: RNCC: 3 | RNVC: 2
2510700680: RNCC: 5 | RNVC: 2

14 Jun 2001

5340-33-202-1631
Mounting Bracket

332021631
723561705-01: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-33-171-7771
Vent Plug

331717771
568489: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-106-5141
Access Cover

331065141
021.40.70.21: RNCC: 3 | RNVC: 2

23 Mar 1998

5340-33-156-5002
Loop Clamp

331565002
-17335-C7000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-0962
Access Cover

332040962
2910900144: RNCC: 3 | RNVC: 2

18 Mar 2005

5340-33-157-7484
Angle Bracket

331577484
536095: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-6224
Loop Clamp

331066224
12 0234: RNCC: 3 | RNVC: 2

12 Nov 1998

5340-33-104-7925
Mending Plate

331047925
W290676913000: RNCC: 3 | RNVC: 2

28 Sep 1995

5340-33-201-3045
Hasp Staple

332013045
230100480: RNCC: 3 | RNVC: 2

20 Jun 2002

5340-33-154-5671
Mending Plate

331545671
319017: RNCC: 3 | RNVC: 2
319017: RNCC: 5 | RNVC: 9

1 Oct 1990

5340-33-155-7454
Mending Plate

331557454
317281: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-154-5517
Retaining Strap

331545517
319476: RNCC: 3 | RNVC: 2
319476: RNCC: 5 | RNVC: 2

1 Oct 1990

5340-33-201-8111
Mounting Plate

332018111
319850: RNCC: 3 | RNVC: 2

25 Oct 2002

5340-33-181-5821
Mounting Plate

331815821
-01201434: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-157-0162
Access Cover

331570162
-87405-G970X: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-7053
Retaining Band

330007053
510552: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-180-5592
Angle Bracket

331805592
153983: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-126-1327
Access Cover

331261327
6646-75: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-33-206-3743
Mounting Plate

332063743
10-51101-0503: RNCC: 3 | RNVC: 2

7 Dec 2007

5340-33-000-9628
Access Cover

330009628
35-11394-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-102-5892
Retaining Clip

331025892
9358-03-17-BIS: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-7846
Angle Bracket

331167846
01.00760/00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-7939
Angle Bracket

331577939
645119: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-002-4860
Access Cover

330024860
212-24100-59-2: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-154-0462
Expansion Plug

331540462
811469: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-200-4395
Elastic Strap

332004395
WQ 886 263 A: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-201-4070
Angle Bracket

332014070
A2810563-001: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-116-0643
Loop Clamp

331160643
HB-18275001: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-1378
Mounting Plate

331161378
BL-13291100: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-126-4222
Access Cover

331264222
C22280-N1000-B10: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-200-1857
Access Cover

332001857
J57462515-001: RNCC: 3 | RNVC: 2

29 Oct 2001

5340-33-001-1384
Angle Bracket

330011384
35-54200-1101: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-106-9405
Mounting Plate

331069405
7356.592.0017: RNCC: 3 | RNVC: 2
2510009046: RNCC: 5 | RNVC: 2
COH-26109: RNCC: 5 | RNVC: 2

7 Apr 1999

5340-33-200-5464
Drift Bolt

332005464
A5-40: RNCC: 3 | RNVC: 2

4 Feb 2002

5340-33-205-9974
Rod Retainer Clip

332059974
-65722-01E00: RNCC: 3 | RNVC: 2

14 Jun 2007

5340-33-116-0334
Mending Plate

331160334
BM-12281020: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-0228
Mounting Bracket

332020228
223591705-01: RNCC: 3 | RNVC: 2

16 Dec 2002

5340-33-202-4944
Access Cover

332024944
722422853-01: RNCC: 3 | RNVC: 2

18 Jul 2003

5340-33-201-1818
Access Cover

332011818
222433580-01: RNCC: 3 | RNVC: 2

28 May 2002

5340-33-001-0051
Mounting Bracket

330010051
35-32345-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-102-3934
Rod End Clevis

331023934
MB51-3-25: RNCC: 3 | RNVC: 2
MB51-3-25: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-1085
Rod End Clevis

330011085
35-46781-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-004-2014
Mounting Bracket

330042014
529715: RNCC: 3 | RNVC: 2
63100088: RNCC: 5 | RNVC: 9

3 Sep 1998

5340-33-201-4561
Access Cover

332014561
723571520-01: RNCC: 3 | RNVC: 2
723571520-01: RNCC: 5 | RNVC: 2

23 Jul 2002

5340-33-001-8064
Strap End Clip

330018064
35-94066-0101: RNCC: 3 | RNVC: 2

1 Mar 1991

5340-33-115-8525
Access Cover

331158525
H8/225/PH/22/7/2: RNCC: 3 | RNVC: 2

18 Sep 1992

5340-33-201-3862
Access Cover

332013862
223581416-01: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-33-106-2148
Bumper

331062148
571914: RNCC: 3 | RNVC: 2

27 Oct 1997

5340-33-201-0108
Mounting Bracket

332010108
2540900199: RNCC: 3 | RNVC: 2
2540900199: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-200-6070
Access Cover

332006070
223105100013: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-200-4581
Access Cover

332004581
WW 487 453: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-33-002-9531
Catch Strike

330029531
6317200331: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-200-2777
Mounting Bracket

332002777
100451020000: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-33-001-3530
Access Cover

330013530
92016048: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-180-7405
Catch Strike

331807405
333140: RNCC: 3 | RNVC: 2
33140F2: RNCC: 5 | RNVC: 2

20 Jul 1995

5340-33-161-7044
Padlock

331617044
730/75: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-107-0973
Loop Clamp

331070973
307235: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-157-8086
Access Cover

331578086
716949: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-2770
Access Cover

331072770
994121: RNCC: 3 | RNVC: 2

21 Sep 1999

5340-33-003-4151
Mounting Plate

330034151
11-43286-0455: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-001-9130
Expansion Shield

330019130
C-20050-11-0-I-03-11: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-003-4177
Mounting Bracket

330034177
11.28952-0202: RNCC: 3 | RNVC: 2

27 Aug 1997

5340-33-004-5570
Mounting Bracket

330045570
NN53378G01: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-33-205-3572
Mounting Bracket

332053572
BMY-20283: RNCC: 3 | RNVC: 2

24 Aug 2006

5340-33-000-6663
Retaining Strap

330006663
510638: RNCC: 1 | RNVC: 2

6 Sep 1988

5340-33-004-4551
Mounting Bracket

330044551
CLT0050-10: RNCC: 3 | RNVC: 2

17 May 1999

5340-33-000-8662
Bow Handle

330008662
T-057045-17: RNCC: 3 | RNVC: 2

10 Feb 1989

5340-33-154-6542
Loop Clamp

331546542
616740: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-106-5233
Access Door Hinge

331065233
631 689 01 52: RNCC: 3 | RNVC: 2

3 Apr 1998

5340-33-206-0824
Mounting Bracket

332060824
120-1073-04: RNCC: 3 | RNVC: 2

27 Jul 2007

5340-33-001-6665
Plug Button

330016665
35-15047-0201-00: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-204-3458
Lever Bracket

332043458
PS-210177: RNCC: 3 | RNVC: 2

18 Jul 2005

5340-33-115-8855
Mounting Bracket

331158855
16581-ZE2-000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-3760
Filler Opening Cap

332053760
CS-295-AG1020404: RNCC: 3 | RNVC: 2

6 Sep 2006

5340-33-116-0345
Angle Bracket

331160345
BA-15178021: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-2081
Mounting Bracket

330012081
35-71200-0201: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-161-5126
Rod End Connector

331615126
411.090.0501: RNCC: 3 | RNVC: 2
GIR 15 UK: RNCC: 3 | RNVC: 2
3120-000016: RNCC: 5 | RNVC: 2
3120000016: RNCC: 5 | RNVC: 2

4 Mar 1994

5340-33-200-4051
Mounting Plate

332004051
MC 409-13/E: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-102-5686
Angle Bracket

331025686
9358-03-18-BIS: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-188-9771
Mending Plate

331889771
3 170 296: RNCC: 3 | RNVC: 2

25 Sep 1995

5340-33-001-1028
Mounting Bracket

330011028
35-46715-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-160-7496
Retaining Clip

331607496
95.496.113: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-106-5378
Furniture Cup

331065378
C0302130: RNCC: 3 | RNVC: 2
PCAMI/RP/29C0302130: RNCC: 4 | RNVC: 1
030213: RNCC: 5 | RNVC: 1

13 Apr 1998

5340-33-202-9034
Access Cover

332029034
723551386-01: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-33-202-9873
Access Cover

332029873
223551813-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-211-4727
Mounting Bracket

332114727
TOM0201124: RNCC: 3 | RNVC: 2
TOM0201124: RNCC: 3 | RNVC: 2

16 Nov 2013

5340-33-160-3806
Retaining Strap

331603806
26.141.609: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-3859
Mounting Plate

332013859
222432109-01: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-33-001-0814
Mounting Bracket

330010814
35-46438-0102: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-0809
Mounting Bracket

330010809
35-46437-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-202-9846
Access Cover

332029846
723552766-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-202-6497
Access Cover

332026497
722422572-01: RNCC: 3 | RNVC: 2

22 Sep 2003

5340-33-004-2842
Angle Bracket

330042842
NN60135P01: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-003-3558
Access Cover

330033558
11.12544-0562: RNCC: 3 | RNVC: 2

26 Jun 1997

5340-33-000-9625
Access Cover

330009625
35-11392-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-1934
Mounting Bracket

330011934
35-66112-0701: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-1080
Rod End Clevis

330011080
35-46775-0101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-9633
Access Cover

330019633
35-22837-0006A02: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-33-004-9486
Hammock Hook

330049486
35-94064-0201: RNCC: 3 | RNVC: 2
CA41200-06-1: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-33-202-9852
Access Cover

332029852
723553701-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-204-0368
Webbing Strap

332040368
PS-902287: RNCC: 3 | RNVC: 2

8 Feb 2005

5340-33-203-8426
Mounting Bracket

332038426
VR09936: RNCC: 3 | RNVC: 2
PCAMI/RP/28A0009936: RNCC: 5 | RNVC: 2

23 Nov 2004

5340-33-200-2604
Snap Hook

332002604
2.13.132: RNCC: 3 | RNVC: 2
NM M-140 M.TIPO 2.GRAN-GI: RNCC: 5 | RNVC: 1

20 Nov 2001

5340-33-161-3676
Mechanical Stop

331613676
615853: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-158-8946
Loop Clamp

331588946
-13100203-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-3355
Catch Strike

331063355
-01601391-0: RNCC: 3 | RNVC: 2

11 Sep 1997

5340-33-106-8073
Mounting Bracket

331068073
RAL-200-2-7-1: RNCC: 3 | RNVC: 2

31 Mar 1999

5340-33-102-4001
Snap Hook

331024001
MD51-7-8: RNCC: 3 | RNVC: 2
MD51-7-8: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-102-2958
Rod End Clevis

331022958
T976-A-3: RNCC: 3 | RNVC: 2

11 Jan 1991

5340-33-102-1867
Mounting Bracket

331021867
MCL-5-66: RNCC: 3 | RNVC: 2
MCL-5-66: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-001-2048
Angle Bracket

330012048
35-71100-1201: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-155-1996
Buckle

331551996
3070-1: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-003-1938
Mending Plate

330031938
HP68100-6-2: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-33-116-6144
Mending Plate

331166144
15-P-34: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-181-8394
Loop Clamp

331818394
-11500308-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-157-1860
Rigid Caster

331571860
S-323-LD9: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-1883
Access Cover

330041883
230096435: RNCC: 3 | RNVC: 2

3 Sep 1998

5340-33-204-9038
Mounting Plate

332049038
41911-29F00: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-33-001-3803
Expansion Plug

330013803
92020130: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-205-1901
Beam Gripping Clamp

332051901
GP1 60 180: RNCC: 3 | RNVC: 2
402041: RNCC: 5 | RNVC: 2
T 900: RNCC: 5 | RNVC: 2

7 Jun 2006

5340-33-102-0217
Rod End Clevis

331020217
2510-000116: RNCC: 3 | RNVC: 2
2510000116: RNCC: 5 | RNVC: 2
411.090.0487: RNCC: 5 | RNVC: 2

6 Aug 1992

5340-33-187-5544
Loop Clamp

331875544
0201606-3: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-158-2223
Retaining Clip

331582223
0216512-8: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-3635
Recess Handle

332003635
C 3782 254: RNCC: 3 | RNVC: 2

21 Jan 2002

5340-33-001-3542
Expansion Plug

330013542
92016063: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-001-3919
Expansion Plug

330013919
92020333: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-200-4413
Access Cover

332004413
WW 258 157 B: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-200-3538
Door Handle

332003538
CF 429 423 -R: RNCC: 3 | RNVC: 2

14 Jan 2002

5340-33-102-2959
Threaded Rod End

331022959
976-E-6: RNCC: 3 | RNVC: 2

11 Jan 1991

5340-33-105-1275
Retaining Strap

331051275
CMH95200-2/3: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-154-6503
Loop Clamp

331546503
3090212411: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-001-4941
Expansion Plug

330014941
92027603: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-107-1946
Hinged Hasp

331071946
61-1-9-0: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-001-9096
Access Cover

330019096
TCH-A12-F2: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-205-4261
Metal Grille

332054261
5040399: RNCC: 3 | RNVC: 2
1.143.11.073: RNCC: 5 | RNVC: 2

21 Sep 2006

5340-33-204-3420
Retaining Bail

332043420
PS-850064: RNCC: 3 | RNVC: 2

18 Jul 2005

5340-33-115-8651
Loop Clamp

331158651
ABR-FS-38: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-33-200-2124
Mending Plate

332002124
J57156391-001: RNCC: 3 | RNVC: 2

5 Nov 2001

5340-33-200-3869
Sliding Block

332003869
CF 232 670 A: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-116-8517
Access Cover

331168517
2106/3: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-158-5549
Support Hook

331585549
-01201661-0: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-181-8295
Mounting Plate

331818295
-10200328-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-158-8959
Loop Clamp

331588959
-2721053-X: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-3261
Mounting Bracket

331163261
8660.023: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-4847
Bumper

330014847
92027411: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-153-9695
Door Handle

331539695
883807: RNCC: 3 | RNVC: 2

4 Jan 1990

5340-33-001-3472
Retaining Strap

330013472
92014810: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-200-4214
Loop Clamp

332004214
WG 306 360 AU: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-33-000-7042
Loop Clamp

330007042
3090221249: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-181-1150
Retaining Strap

331811150
-16689-61501: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-154-2236
Mending Plate

331542236
647016: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-107-4359
Mounting Plate

331074359
W290683104400: RNCC: 3 | RNVC: 2

13 Oct 1999

5340-33-001-5437
Access Cover

330015437
92040467: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-200-1648
Mounting Plate

332001648
28110302: RNCC: 3 | RNVC: 2

26 Oct 2001

5340-33-155-1735
Mounting Bracket

331551735
22,65.01: RNCC: 3 | RNVC: 2

21 Jan 1991

5340-33-204-0644
Webbing Strap

332040644
OEWL0GVEO007000: RNCC: 3 | RNVC: 2

3 Mar 2005

5340-33-201-6952
Mounting Bracket

332016952
320491: RNCC: 3 | RNVC: 2

3 Oct 2002

5340-33-107-7878
Mounting Bracket

331077878
W290684603400: RNCC: 3 | RNVC: 2

3 Aug 2000

5340-33-002-8366
Butt Hinge

330028366
SE022514226A: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-154-0201
Bow Handle

331540201
801205: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-154-6526
Loop Clamp

331546526
320354: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-106-6524
Lock Bolt

331066524
-80533-G9600: RNCC: 3 | RNVC: 2

3 Dec 1998

5340-33-157-8439
Angle Bracket

331578439
753642: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-187-4948
Access Cover

331874948
201721: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-211-4957
Latch Bar

332114957
0212354: RNCC: 3 | RNVC: 2

22 Nov 2013

5340-33-155-8448
Loop Clamp

331558448
8731400241: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-33-107-0317
Runner

331070317
9000913: RNCC: 3 | RNVC: 2

26 Mar 2001

5340-33-001-4463
Bumper

330014463
92026349: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-205-3947
Bridge Clamp

332053947
2033194: RNCC: 3 | RNVC: 2

13 Sep 2006

5340-33-206-1956
Mounting Plate

332061956
CBD58505P43: RNCC: 3 | RNVC: 2

24 Sep 2007

5340-33-203-6998
Access Cover

332036998
191108331: RNCC: 3 | RNVC: 2
191108331: RNCC: 5 | RNVC: 2

9 Sep 2004

5340-33-206-1730
Mounting Plate

332061730
PCMSABMR082: RNCC: 3 | RNVC: 2

14 Sep 2007

5340-33-200-0942
Access Cover

332000942
7054.252.2220: RNCC: 3 | RNVC: 2
2510701298: RNCC: 5 | RNVC: 2

5 Oct 2001

5340-33-205-4924
Stand Base

332054924
WW 115 167 AU: RNCC: 3 | RNVC: 2

20 Nov 2006

5340-33-106-8190
Mounting Bracket

331068190
2530000960: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-154-6502
Loop Clamp

331546502
3090212211: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-181-0739
Mounting Bracket

331810739
-85221-G9600: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-154-6516
Loop Clamp

331546516
312592: RNCC: 3 | RNVC: 2
312592: RNCC: 5 | RNVC: 9

1 Oct 1990

5340-33-204-1177
Retaining Clip

332041177
08011-84CB0: RNCC: 3 | RNVC: 2

31 Mar 2005

5340-33-157-0200
Access Cover

331570200
-38350-G9501: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-2195
Door Handle

331032195
9500.00.682927: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-204-8798
Strap Hinge

332048798
CAN66034: RNCC: 3 | RNVC: 2

20 Feb 2006

5340-33-210-9512
Handwheel

332109512
1062027: RNCC: 3 | RNVC: 2

19 Apr 2013

5340-33-108-1836
Mounting Plate

331081836
7054.292.0012: RNCC: 3 | RNVC: 2
2930700046: RNCC: 5 | RNVC: 2

29 Jan 2001

5340-33-200-8506
Mounting Bracket

332008506
0639.250.9416: RNCC: 3 | RNVC: 2
2530000761: RNCC: 5 | RNVC: 2
2530000761: RNCC: 5 | RNVC: 2

5 Apr 2002

5340-33-205-6306
Lock-Release Lever

332056306
1025901980: RNCC: 3 | RNVC: 2
9743.100.0563: RNCC: 5 | RNVC: 2

23 Jan 2007

5340-33-107-5009
Mounting Plate

331075009
W290684506000: RNCC: 3 | RNVC: 2

17 Apr 2000

5340-33-002-9783
Retaining Clip

330029783
1218601: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-33-108-1178
Mounting Bracket

331081178
04840211: RNCC: 3 | RNVC: 2

28 Dec 2000

5340-33-001-5175
Retaining Strap

330015175
92030235: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-000-7728
Bow Handle

330007728
422200001100000: RNCC: 3 | RNVC: 2

1 Dec 1988

5340-33-161-1358
Mounting Plate

331611358
00.591.286.36: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-154-6466
Angle Bracket

331546466
738953: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-204-6298
Mounting Plate

332046298
5035426: RNCC: 3 | RNVC: 2

10 Nov 2005

5340-33-203-6549
Loop Clamp

332036549
CBD50535G02: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-33-001-9036
Metal Grille

330019036
CRA-1-A: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-001-5737
Access Cover

330015737
92042340: RNCC: 3 | RNVC: 2

15 Nov 1989

5340-33-108-4512
Cushioning Pad

331084512
9644.251.6481: RNCC: 3 | RNVC: 2
2590900100: RNCC: 5 | RNVC: 2
2590900100: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-108-1791
Retaining Strap

331081791
7054.252.0069: RNCC: 3 | RNVC: 2
2910700016: RNCC: 5 | RNVC: 2

29 Jan 2001

5340-33-001-5668
Angle Bracket

330015668
92041713: RNCC: 3 | RNVC: 2

15 Nov 1989

5340-33-004-3145
Plug Button

330043145
98428946: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-33-161-2980
Mechanical Stop

331612980
194955: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-33-107-6464
Stand Base

331076464
7356.252.4260: RNCC: 3 | RNVC: 2
2510700813: RNCC: 5 | RNVC: 2

17 Apr 2000

5340-33-158-4333
Access Cover

331584333
542315: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-2586
Mounting Plate

331082586
9644.251.0600: RNCC: 3 | RNVC: 2
2510009953: RNCC: 5 | RNVC: 2
2510009953: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-188-8616
Bumper

331888616
02330120: RNCC: 3 | RNVC: 2

18 Sep 1995

5340-33-115-9577
Mounting Plate

331159577
6.308.0.972.008.5: RNCC: 3 | RNVC: 2

11 Jul 1995

Load More Results