What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Cup?

A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

Hardware, Commercial - Spain (ES)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Spain (ES) - NCB is 33

Page 18 of 39

NSN Format for Hardware, Commercial
Codified by Spain

53	40	33	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Spain (ES)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 12 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 62 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 155 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 63 Items
Holder,Spring 38 Items
What is a Compression Cup? 92 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 84 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 236 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 126 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 60 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 10 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 686 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 21 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 24 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 35 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Thumb Latch? 21 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Friction Catch? 15 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 14 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 34 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 28 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 42 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Doorknob? 29 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 10 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 44 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Butt Hinge Leaf? 41 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 72 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 22 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 47 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 583 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 67 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 48 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Cup? 13 Items: A Furniture Cup (CUP,FURNITURE) is an item placed under the legs of furniture to protect floors or rugs.
What is a Corrosion Preventive Anode? 24 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 53 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 223 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 173 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 134 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 75 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 14 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Blank Panel? 62 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 45 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 12 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 17 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 38 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 1456 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 12 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 59 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 35 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 981 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 70 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 138 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 40 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud? 16 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 67 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 15 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 18 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Spring Loaded Cylinder Fastener? 10 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 95 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 40 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 17 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 15 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 81 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 151 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Bail Handle? 27 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 544 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 26 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 60 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 225 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 188 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 18 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 54 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 23 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 72 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 24 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Butt Hinge? 120 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 101 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 42 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 65 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 200 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 30 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 43 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Pawl Fastener? 13 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 22 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 2121 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 18 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 63 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is a Manual Control Handle? 195 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 20 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 25 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 80 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 56 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 17 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 2811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 24 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 21 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 18 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 12 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 12 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 1321 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 26 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 206 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 66 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 182 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 17 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 11 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Pipe Hanger? 76 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 61 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 113 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 22 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Dust And Moisture Seal Protective Cover? 72 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 24 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Sliding Block? 23 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 147 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 178 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 20 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 28 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 101 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 34 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 10 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 20 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 63 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 13 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 151 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 37 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is an Utility Guard Rail Section? 47 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Bumper? 204 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 18 of 39

5340-33-156-5044
Loop Clamp

331565044
-27859-G3005: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-0946
Mounting Bracket

332000946
7054.252.2340: RNCC: 3 | RNVC: 2
2540700133: RNCC: 5 | RNVC: 2

5 Oct 2001

5340-33-204-5305
Utility Access Door

332045305
PCAMI/RP/07000000000310: RNCC: 3 | RNVC: 2

7 Oct 2005

5340-33-107-0849
Rim Lock

331070849
1540/15: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-33-003-3545
Pipe Hanger

330033545
11.12586-0030: RNCC: 3 | RNVC: 2

26 Jun 1997

5340-33-000-0094
Buckle

330000094
1005000146: RNCC: 1 | RNVC: 2
1005-000146: RNCC: 3 | RNVC: 2

15 Jul 1985

5340-33-103-1282
Snap Hook

331031282
375.090.1121: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-181-1154
Retaining Strap

331811154
-20550-G970X: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-004-8943
Block Clamp

330048943
NN58364P01: RNCC: 3 | RNVC: 2

28 Jan 2000

5340-33-001-1551
Mounting Bracket

330011551
35-56240-0006: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-201-4781
Access Cover

332014781
J52466001-001: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-108-2447
Mounting Bracket

331082447
9644.120.0270: RNCC: 3 | RNVC: 2
2510007042: RNCC: 5 | RNVC: 2
2510007042: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-33-108-2331
Mounting Bracket

331082331
0640.120.0210: RNCC: 3 | RNVC: 2
2510004587: RNCC: 5 | RNVC: 2
2510004587: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-209-4566
Utility Guard Rail Section

332094566
0663.20.3003.00: RNCC: 3 | RNVC: 2

26 Dec 2011

5340-33-158-7634
Doorknob

331587634
171-315: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-33-158-1492
Mounting Bracket

331581492
616925: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-7103
Loop Clamp

332027103
9673.250.5714: RNCC: 3 | RNVC: 2
2540901076: RNCC: 5 | RNVC: 2
2540901076: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-145-5459
Angle Bracket

331455459
87-347: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-0714
Mechanical Stop

331160714
CA-18899000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-1687
Loop Clamp

332011687
EN4114F10NH1: RNCC: 2 | RNVC: 2

20 May 2002

5340-33-200-8235
Mounting Bracket

332008235
7060.252.0180: RNCC: 3 | RNVC: 2
2510700801: RNCC: 5 | RNVC: 2

14 Mar 2002

5340-33-116-8167
Retaining Strap

331168167
15 P-110: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-6500
Access Cover

330016500
35-22925-0003: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-155-7504
Mending Plate

331557504
698001: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-106-8891
Mounting Bracket

331068891
322520: RNCC: 3 | RNVC: 2

5 Apr 1999

5340-33-108-2221
Mending Plate

331082221
9644.101.0028: RNCC: 3 | RNVC: 2
1005006349: RNCC: 5 | RNVC: 2
1005006349: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-004-5138
Mounting Bracket

330045138
0043090400: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-001-2965
Loop Clamp

330012965
CAN68247C: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-004-4803
Access Cover

330044803
191959: RNCC: 3 | RNVC: 2

2 Jun 1999

5340-33-000-7506
Angle Bracket

330007506
781681: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-201-4219
Angle Bracket

332014219
A2812115-401: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-33-201-4047
Mending Plate

332014047
A2810581-003: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-107-9248
Mounting Bracket

331079248
7057.252.0030: RNCC: 3 | RNVC: 2
2510700026: RNCC: 5 | RNVC: 2

26 Sep 2000

5340-33-106-5545
Loop Clamp

331065545
17859: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-33-200-0145
Access Cover

332000145
CBD50510G01: RNCC: 3 | RNVC: 2

24 Sep 2001

5340-33-000-6982
Loop Clamp

330006982
768907: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-159-9349
Access Cover

331599349
00.559.215.00: RNCC: 3 | RNVC: 2

9 Oct 1995

5340-33-202-7064
Access Door Hinge

332027064
9673.290.5140: RNCC: 3 | RNVC: 2
2910900063: RNCC: 5 | RNVC: 2
2910900063: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-000-0513
Access Cover

330000513
C10663/010: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-210-7663
Track Stop

332107663
4259.1020.00.16: RNCC: 3 | RNVC: 2

5 Feb 2013

5340-33-145-5768
Mounting Plate

331455768
70-723: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-33-107-0839
Rim Lock

331070839
199661: RNCC: 3 | RNVC: 2
920436: RNCC: 5 | RNVC: 9

6 Jul 1999

5340-33-201-8154
Sliding Block

332018154
WW 400 140B: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-200-0775
Webbing Strap

332000775
7054.252.0454: RNCC: 3 | RNVC: 2
2540700121: RNCC: 5 | RNVC: 2

4 Oct 2001

5340-33-200-9797
Lock-Release Lever

332009797
2510008640: RNCC: 3 | RNVC: 2
2510008640: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-000-6676
Retaining Strap

330006676
555591: RNCC: 1 | RNVC: 2

6 Sep 1988

5340-33-200-4846
Access Cover

332004846
82861: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-33-154-7481
Bow Handle

331547481
817847: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-161-3624
Access Cover

331613624
585566: RNCC: 3 | RNVC: 2

13 Dec 1996

5340-33-155-1673
Pipe Hanger

331551673
30X5X200: RNCC: 3 | RNVC: 2

15 Jun 1990

5340-33-107-7916
Access Cover

331077916
61.11.129: RNCC: 3 | RNVC: 2

3 Aug 2000

5340-33-158-9566
Access Cover

331589566
8517.21: RNCC: 3 | RNVC: 2

17 Nov 1992

5340-33-157-8768
Angle Bracket

331578768
818858: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-4454
Mounting Bracket

331084454
9644.250.8800: RNCC: 3 | RNVC: 2
2540001238: RNCC: 5 | RNVC: 2
2540001238: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-001-2057
Mounting Bracket

330012057
35-71101-0401: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-001-1287
Mounting Bracket

330011287
35-52128-0101: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-127-0211
Retaining Strap

331270211
CR220002: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-33-125-7087
Access Cover

331257087
682203630: RNCC: 3 | RNVC: 2

14 Sep 1995

5340-33-202-5497
Access Cover

332025497
W290684801400: RNCC: 3 | RNVC: 2

13 Aug 2003

5340-33-000-7816
Extension Handle

330007816
426202010500000: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-003-5460
Webbing Strap

330035460
220150010: RNCC: 3 | RNVC: 2

3 Dec 1997

5340-33-001-2302
Rod End Connector

330012302
35-82201-0001: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-161-1353
Mounting Plate

331611353
00.591.285.36: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-4500
Access Cover

332004500
WW 447 313: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-200-4432
Access Cover

332004432
WW 321 508: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-106-8867
Mounting Bracket

331068867
7356.592.1230: RNCC: 3 | RNVC: 2
2510010130: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-108-5645
Strap Fastener Loop

331085645
9644.100.0311: RNCC: 3 | RNVC: 2
5365000210: RNCC: 5 | RNVC: 2
5365000210: RNCC: 5 | RNVC: 2

27 Apr 2001

5340-33-000-6971
Loop Clamp

330006971
642637: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-002-0112
Padlock

330020112
80 P: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-33-203-1767
Mending Plate

332031767
067.G.08: RNCC: 3 | RNVC: 2
067.G.08.00: RNCC: 5 | RNVC: 2

10 Feb 2004

5340-33-114-4830
Mounting Bracket

331144830
10ILA 1-62: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-188-7910
Access Cover

331887910
3 170 107 A: RNCC: 3 | RNVC: 2

22 Sep 1995

5340-33-145-6309
Angle Bracket

331456309
TAB. E4-32: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-0001
Mending Plate

332030001
GUIVADZ66010X000: RNCC: 3 | RNVC: 2

29 Dec 2003

5340-33-205-4089
Mounting Plate

332054089
W290620306200: RNCC: 3 | RNVC: 2

15 Sep 2006

5340-33-187-5223
Access Cover

331875223
303997: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-189-1938
Rim Lock

331891938
02070142: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-107-3079
Access Cover

331073079
21124809000: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-33-108-5409
Lock Bolt

331085409
9644.251.6294: RNCC: 3 | RNVC: 2
2510901034: RNCC: 5 | RNVC: 2
2510901034: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-155-7545
Mending Plate

331557545
731579: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-160-5800
Mechanical Stop

331605800
97.500.906: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-0496
Handle Grip

332030496
5340-900085: RNCC: 3 | RNVC: 2

23 Jan 2004

5340-33-001-6597
Mounting Bracket

330016597
35-53167-0001: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-107-4661
Loop Clamp

331074661
7356.252.0864: RNCC: 3 | RNVC: 2
5340001792: RNCC: 5 | RNVC: 2

15 Nov 1999

5340-33-180-7626
Access Cover

331807626
512237: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-116-2883
Door Hook And Eye

331162883
52.61: RNCC: 3 | RNVC: 9

27 Jul 1995

5340-33-158-2225
Retaining Clip

331582225
0216513-6: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-180-5646
Pawl Fastener

331805646
158386: RNCC: 3 | RNVC: 2
158386: RNCC: 6 | RNVC: 9

11 Jul 1995

5340-33-154-6508
Loop Clamp

331546508
3090219249: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-33-160-7556
Vent Plug

331607556
97.517.612: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-205-2163
Mounting Plate

332052163
CBD50524P18: RNCC: 3 | RNVC: 2

22 Jun 2006

5340-33-205-0713
Angle Bracket

332050713
19664610: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-33-189-2276
Mounting Bracket

331892276
01210030: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-158-9933
Door Handle

331589933
05.224.710.24: RNCC: 3 | RNVC: 2

12 Jun 1995

5340-33-202-9580
Mounting Bracket

332029580
223552779-01: RNCC: 3 | RNVC: 2
223552779: RNCC: 5 | RNVC: 1

15 Dec 2003

5340-33-200-7268
Mounting Plate

332007268
IN-050B-Q03I.34: RNCC: 3 | RNVC: 2

5 Mar 2002

5340-33-001-9999
Mounting Bracket

330019999
35-51237-0001: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-33-115-8530
Access Cover

331158530
H8/225/PH/29/10: RNCC: 3 | RNVC: 2

18 Sep 1992

5340-33-157-7931
Angle Bracket

331577931
643057: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-4505
Strap Fastener Loop

331084505
9644.251.6416: RNCC: 3 | RNVC: 2
2590900078: RNCC: 5 | RNVC: 2
2590900078: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-002-8135
Door Handle

330028135
0004474346: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-202-0302
Mounting Bracket

332020302
1025-901469: RNCC: 3 | RNVC: 2

19 Dec 2002

5340-33-003-6729
Mounting Bracket

330036729
2510003174: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-211-4682
Vent Plug

332114682
VR03305030: RNCC: 3 | RNVC: 2
VR03305030: RNCC: 3 | RNVC: 2

15 Nov 2013

5340-33-160-3859
Door Closer

331603859
95.605.963: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-4972
Compression Cup

330014972
92027635: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-107-8430
Retaining Strap

331078430
36841: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-33-108-3327
Mounting Bracket

331083327
SP07371: RNCC: 3 | RNVC: 2

13 Feb 2001

5340-33-107-4482
Mounting Plate

331074482
W280679500203: RNCC: 3 | RNVC: 2

13 Oct 1999

5340-33-201-7106
Access Cover

332017106
1025-900987: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-33-181-9972
Access Cover

331819972
-73800016-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-104-8729
Expansion Plug

331048729
61694.00.3: RNCC: 3 | RNVC: 2

12 Sep 1995

5340-33-205-1902
Beam Gripping Clamp

332051902
GP2 60 200: RNCC: 3 | RNVC: 2
402042: RNCC: 5 | RNVC: 2
T 910: RNCC: 5 | RNVC: 2

7 Jun 2006

5340-33-107-7817
Rod Retainer Clip

331077817
-68114-G970X: RNCC: 3 | RNVC: 2

18 May 2000

5340-33-189-1736
Elastic Strap

331891736
02250080: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-115-8136
Access Cover

331158136
92282218717: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-116-3730
Mounting Plate

331163730
6370.038: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-6622
Bow Handle

332026622
9673.590.5021: RNCC: 3 | RNVC: 2
2510900931: RNCC: 5 | RNVC: 2
2510900931: RNCC: 5 | RNVC: 2

23 Sep 2003

5340-33-116-5525
Access Cover

331165525
12310-ZE2-000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-155-2073
Loop Clamp

331552073
24,7.659: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-33-188-7348
Mounting Bracket

331887348
6.305.0.632.014.4: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-33-114-4737
Mounting Bracket

331144737
F-131 35: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-108-4687
Lock-Release Lever

331084687
0639.250.3070: RNCC: 3 | RNVC: 2
5340001488: RNCC: 5 | RNVC: 2
5340001488: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-005-3702
Cane Bolt

330053702
844.889: RNCC: 3 | RNVC: 2
5400000844889: RNCC: 5 | RNVC: 2

16 Jul 2001

5340-33-203-6408
Access Cover

332036408
388007: RNCC: 3 | RNVC: 2
388007: RNCC: 5 | RNVC: 2

17 Jul 2004

5340-33-156-4631
Hinged Hasp

331564631
-90570-R8000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-0100
Mounting Bracket

332010100
2540900185: RNCC: 3 | RNVC: 2
2540900185: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-106-6007
Retaining Strap

331066007
682800: RNCC: 3 | RNVC: 2

4 Sep 1998

5340-33-000-6980
Loop Clamp

330006980
764841: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-201-8163
Angle Bracket

332018163
319824: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-33-203-3024
Access Cover

332033024
9673.250.5780: RNCC: 3 | RNVC: 2
2540900583: RNCC: 5 | RNVC: 2
2540900583: RNCC: 5 | RNVC: 2

25 Feb 2004

5340-33-209-8479
Utility Resilient Mount

332098479
0861104520: RNCC: 3 | RNVC: 2

15 Mar 2012

5340-33-116-6270
Access Cover

331166270
701.011.103: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-2050
Angle Bracket

330012050
35-71100-1401: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-211-4981
Block Clamp

332114981
J29167125-403: RNCC: 3 | RNVC: 2

22 Nov 2013

5340-33-001-0546
Mounting Bracket

330010546
35-46210-2301: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-102-3935
Threaded Rod End

331023935
MDL-5-16: RNCC: 3 | RNVC: 2
MDL-5-16: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-0503
Mounting Bracket

331070503
631 760 16 28: RNCC: 3 | RNVC: 2

26 May 1999

5340-33-157-7112
Sliding Door Track

331577112
311841: RNCC: 3 | RNVC: 2
311841: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-7706
Angle Bracket

330047706
-02305039-0: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-33-157-7135
Angle Bracket

331577135
313078: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-6671
Access Cover

331546671
771421: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-154-0671
Door Holder

331540671
509157: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-001-4522
Access Cover

330014522
92026454: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-103-5123
Retaining Strap

331035123
1306: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-000-7501
Angle Bracket

330007501
743486: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-206-1311
Mounting Plate

332061311
PCMSABMR076: RNCC: 3 | RNVC: 2

30 Aug 2007

5340-33-200-4588
Mounting Bracket

332004588
WW 488 105: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-33-202-9974
Mending Plate

332029974
MHC2121520: RNCC: 3 | RNVC: 2
MHC1121520: RNCC: 5 | RNVC: 2

19 Dec 2003

5340-33-154-5545
Retaining Strap

331545545
719206: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-002-0877
Mounting Bracket

330020877
322515: RNCC: 3 | RNVC: 2
322515: RNCC: 5 | RNVC: 2

30 Oct 1992

5340-33-204-4658
Mounting Plate

332044658
CBD50537P02: RNCC: 3 | RNVC: 2

19 Sep 2005

5340-33-003-6739
Mounting Plate

330036739
2510003412: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-157-0148
Access Cover

331570148
-87455-G970X: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-7505
Access Cover

331577505
541765: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-9333
Mounting Bracket

332029333
CBD50512P75: RNCC: 3 | RNVC: 2

1 Dec 2003

5340-33-200-8906
Mounting Plate

332008906
W290698604500: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-33-204-2911
Angle Bracket

332042911
164647: RNCC: 3 | RNVC: 2

13 Jun 2005

5340-33-181-1411
Retaining Clip

331811411
-14908-T0102: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-4288
Mounting Plate

332004288
7051.252.0004: RNCC: 3 | RNVC: 2
2540700102: RNCC: 5 | RNVC: 2

25 Jan 2002

5340-33-000-7480
Angle Bracket

330007480
568760: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-201-0017
Mounting Bracket

332010017
2510901533: RNCC: 3 | RNVC: 2
2510901533: RNCC: 5 | RNVC: 2

22 Apr 2002

5340-33-161-2591
Mounting Bracket

331612591
2930000235: RNCC: 3 | RNVC: 2
317236: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-33-205-3036
Access Cover

332053036
11352-29F50: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-33-182-0063
Angle Bracket

331820063
-77500007-0: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-209-4463
Utility Guard Rail Section

332094463
0663.10.3003.00: RNCC: 3 | RNVC: 2

22 Dec 2011

5340-33-001-5738
Access Cover

330015738
92042341: RNCC: 3 | RNVC: 2

15 Nov 1989

5340-33-201-0133
Mounting Plate

332010133
2540900516: RNCC: 3 | RNVC: 2
2540900516: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-200-5919
Mounting Plate

332005919
WW 386 424: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-205-6899
Loop Clamp

332056899
2000276: RNCC: 3 | RNVC: 2

23 Feb 2007

5340-33-201-6558
Access Cover

332016558
1413.1002.00.00: RNCC: 3 | RNVC: 2
1589990590100: RNCC: 5 | RNVC: 2

26 Sep 2002

5340-33-205-7385
Access Cover

332057385
709051377: RNCC: 3 | RNVC: 2

7 Mar 2007

5340-33-160-6392
Mounting Bracket

331606392
91.521.910: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-9014
Bow Handle

330019014
20050-AAC7: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-108-5631
Lock Bolt

331085631
9644.250.6036: RNCC: 3 | RNVC: 2
5340001657: RNCC: 5 | RNVC: 2
5340001657: RNCC: 5 | RNVC: 2

23 Apr 2001

5340-33-000-6924
Loop Clamp

330006924
510375: RNCC: 1 | RNVC: 2

8 Sep 1988

5340-33-106-5753
Mounting Plate

331065753
1386773: RNCC: 3 | RNVC: 2
1386773: RNCC: 5 | RNVC: 2

31 Mar 1999

5340-33-001-7216
Mounting Bracket

330017216
35-52162-0001: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-33-161-2561
Mounting Bracket

331612561
2510-004038: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-33-206-0692
Mounting Bracket

332060692
NN60977P01: RNCC: 3 | RNVC: 2

20 Jul 2007

5340-33-157-7268
Angle Bracket

331577268
318834: RNCC: 3 | RNVC: 2
318834: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-9907
Mounting Bracket

332019907
1025-901223: RNCC: 3 | RNVC: 2

9 Dec 2002

5340-33-206-1200
Utility Access Door

332061200
SEOD111120: RNCC: 3 | RNVC: 2

22 Aug 2007

5340-33-116-3214
Mounting Plate

331163214
6370.082: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-103-2021
Clamping Catch

331032021
9039.30.981.000: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-4271
Mounting Plate

331084271
9644.590.5036: RNCC: 3 | RNVC: 2
2510009337: RNCC: 5 | RNVC: 2
2510009337: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-203-2739
Mounting Bracket

332032739
9673.100.0047: RNCC: 3 | RNVC: 2
1005900385: RNCC: 5 | RNVC: 2
1005900385: RNCC: 5 | RNVC: 2

19 Feb 2004

5340-33-107-4304
Mounting Plate

331074304
W290683109500: RNCC: 3 | RNVC: 2

14 Oct 1999

5340-33-107-4907
Lock Bolt

331074907
W290684709400: RNCC: 3 | RNVC: 2

29 Nov 1999

5340-33-106-8170
Angle Bracket

331068170
7356.252.2230: RNCC: 3 | RNVC: 2
2510010082: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-33-103-2773
Angle Bracket

331032773
545998: RNCC: 3 | RNVC: 2

5 Apr 1994

5340-33-001-1709
Loop Clamp

330011709
35-61337-0201: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-005-3871
Mounting Bracket

330053871
2PP4083-0801G001: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-33-002-4647
Rod End Connector

330024647
CA28800-08-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-206-0761
Angle Bracket

332060761
NN60965P01: RNCC: 3 | RNVC: 2

26 Jul 2007

5340-33-203-2056
Mounting Bracket

332032056
2540900577: RNCC: 3 | RNVC: 2
2540900577: RNCC: 5 | RNVC: 2

16 Feb 2004

5340-33-004-5217
Access Cover

330045217
1211260: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-002-0935
Door Handle

330020935
317890: RNCC: 3 | RNVC: 2

3 Feb 1993

5340-33-204-0209
Handle Grip

332040209
9502.103.8162: RNCC: 3 | RNVC: 2
1010900148: RNCC: 5 | RNVC: 2

3 Feb 2005

5340-33-210-8707
Butt Hinge Leaf

332108707
TA010: RNCC: 3 | RNVC: 2

15 Mar 2013

5340-33-107-9958
Mounting Bracket

331079958
9644.250.1860: RNCC: 3 | RNVC: 2
1005005259: RNCC: 5 | RNVC: 2
1005005259: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-001-8361
Expansion Shield

330018361
20050-572C: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-203-7024
Mounting Bracket

332037024
999111131: RNCC: 3 | RNVC: 2
999111131: RNCC: 5 | RNVC: 2

9 Sep 2004

5340-33-203-0866
Thumb Latch

332030866
710900: RNCC: 3 | RNVC: 2

28 Jan 2004

5340-33-004-8895
Mounting Plate

330048895
97073: RNCC: 3 | RNVC: 2

27 Jan 2000

5340-33-116-1347
Expansion Plug

331161347
BV-12255001: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-000-1728
Snap Hook

330001728
EG0DIN5299: RNCC: 2 | RNVC: 2
5340-000014: RNCC: 3 | RNVC: 2

27 Nov 1986

5340-33-158-7267
Vent Plug

331587267
9045-211: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-33-206-2293
Access Cover

332062293
403778: RNCC: 3 | RNVC: 2
403778: RNCC: 5 | RNVC: 2
2940-33-M19-4380: RNCC: 6 | RNVC: 9

4 Oct 2007

5340-33-189-1922
Strapping

331891922
02180030: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-107-5008
Mounting Bracket

331075008
W290684504300: RNCC: 3 | RNVC: 2

17 Apr 2000

5340-33-204-4605
Mounting Bracket

332044605
CBD50503P29: RNCC: 3 | RNVC: 2

16 Sep 2005

5340-33-108-4396
Mounting Plate

331084396
9644.251.5087: RNCC: 3 | RNVC: 2
2540000521: RNCC: 5 | RNVC: 2
2540000521: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-156-4629
Butt Hinge

331564629
-80400-G9602: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-5247
Retaining Strap

330015247
92032011: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-33-204-6145
Angle Bracket

332046145
5012666: RNCC: 3 | RNVC: 2

4 Nov 2005

5340-33-115-9762
Loop Clamp

331159762
000.965.07.00: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-4087
Cane Bolt

330014087
92021701: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-202-1779
Mortise Latch

332021779
35-25129-0505: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-33-204-8634
Mounting Plate

332048634
PS-501018: RNCC: 3 | RNVC: 2

15 Feb 2006

5340-33-203-7979
Access Cover

332037979
10-50130-0101: RNCC: 3 | RNVC: 2

22 Oct 2004

5340-33-108-4191
Angle Bracket

331084191
9644.250.1960: RNCC: 3 | RNVC: 2
1005006038: RNCC: 5 | RNVC: 2
1005006038: RNCC: 5 | RNVC: 2

2 Apr 2001

5340-33-116-4502
Loop Clamp

331164502
92290600320: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-106-7748
Angle Bracket

331067748
52234-2: RNCC: 3 | RNVC: 2

15 Mar 1999

5340-33-106-4027
Rim Lock Set

331064027
-68630-Y9501: RNCC: 3 | RNVC: 2

12 Dec 1997

5340-33-205-5654
Mounting Bracket

332055654
CBD57501P13: RNCC: 3 | RNVC: 2

19 Dec 2006

5340-33-106-6552
Turnbuckle

331066552
SM60320000: RNCC: 3 | RNVC: 2

3 Dec 1998

5340-33-155-7488
Mending Plate

331557488
317023: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-106-7871
Angle Bracket

331067871
7356.292.0181: RNCC: 3 | RNVC: 2
2510011081: RNCC: 5 | RNVC: 2

17 Mar 1999

5340-33-155-4378
Loop Clamp

331554378
550469: RNCC: 3 | RNVC: 2
550469: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-107-4945
Mounting Bracket

331074945
W290684711000: RNCC: 3 | RNVC: 2

1 Dec 1999

5340-33-116-7516
Angle Bracket

331167516
648730: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-4034
Mounting Plate

332054034
5041069: RNCC: 3 | RNVC: 2
1.143.60.925: RNCC: 5 | RNVC: 2

14 Sep 2006

5340-33-116-0658
Loop Clamp

331160658
HV-15127010: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-9499
Mounting Bracket

332019499
J92663571-003: RNCC: 3 | RNVC: 2

20 Nov 2002

5340-33-103-2477
Mounting Plate

331032477
1055-000440: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-1063
Mounting Bracket

330011063
35-46743-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-108-0523
Mounting Plate

331080523
9644.281.5086: RNCC: 3 | RNVC: 2
2930900045: RNCC: 5 | RNVC: 2
2930900045: RNCC: 5 | RNVC: 2

11 Dec 2000

5340-33-161-1831
Mounting Bracket

331611831
5340-000644: RNCC: 3 | RNVC: 2
5340000644: RNCC: 5 | RNVC: 2

3 Jan 1995

5340-33-102-1655
Mounting Bracket

331021655
42620002010: RNCC: 3 | RNVC: 2
MBL-5-1: RNCC: 3 | RNVC: 2
42620002010: RNCC: 3 | RNVC: 2
MBL-5-1: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-116-2487
Retaining Strap

331162487
A-128.150.5: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-201-1422
Webbing Strap

332011422
SP03740-1: RNCC: 3 | RNVC: 2

16 May 2002

5340-33-106-0515
Door Hook

331060515
316995: RNCC: 3 | RNVC: 2

13 Dec 1996

5340-33-200-7393
Hinge Torsion Bar

332007393
27681010: RNCC: 3 | RNVC: 2

6 Mar 2002

5340-33-003-4792
Access Cover

330034792
105 6920: RNCC: 3 | RNVC: 2

5 Nov 1997

5340-33-107-7416
Mounting Bracket

331077416
W290684003300: RNCC: 3 | RNVC: 2

19 May 2000

5340-33-157-7310
Blank Panel

331577310
320319: RNCC: 3 | RNVC: 2
320319: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-200-0308
Mounting Bracket

332000308
7054.252.2150: RNCC: 3 | RNVC: 2
2540700112: RNCC: 5 | RNVC: 2

25 Sep 2001

5340-33-000-1028
Strapping

330001028
H350GS/D123: RNCC: 1 | RNVC: 2

14 Jul 1986

5340-33-126-0726
Vent Plug

331260726
1745-01: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-33-204-4964
Angle Bracket

332044964
J29165590-401: RNCC: 3 | RNVC: 2

29 Sep 2005

5340-33-201-6901
Mounting Bracket

332016901
LA-IRV-008: RNCC: 3 | RNVC: 2

3 Oct 2002

5340-33-001-1759
Mounting Bracket

330011759
35-62120-0101: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-204-4514
Protection Bellows

332044514
29346-56B01: RNCC: 3 | RNVC: 2
29346-60A40: RNCC: 5 | RNVC: 2

15 Sep 2005

5340-33-145-5269
Access Cover

331455269
70-429: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-181-8134
Mounting Bracket

331818134
-09100758-1: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-189-2153
Access Cover

331892153
01210021: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-203-3628
Block Clamp

332033628
4730002509: RNCC: 3 | RNVC: 2

11 Mar 2004

5340-33-103-4959
Mounting Plate

331034959
9236 EI 42000 PM: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-203-1929
Access Cover

332031929
2590900050: RNCC: 3 | RNVC: 2
9673.120.0120: RNCC: 3 | RNVC: 2
2590900050: RNCC: 5 | RNVC: 2

13 Feb 2004

5340-33-200-5606
Swivel Caster

332005606
549048: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-33-202-9982
T Bracket

332029982
MHC1121530: RNCC: 3 | RNVC: 2

19 Dec 2003

5340-33-002-0541
Mounting Bracket

330020541
C-20030-2/1-I-04-18: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-33-201-1814
Mounting Bracket

332011814
222432751-01: RNCC: 3 | RNVC: 2

28 May 2002

5340-33-001-0699
Mounting Bracket

330010699
35-46345-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-001-1810
Mounting Bracket

330011810
35-63071-0501: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-201-0943
Access Cover

332010943
2540000606: RNCC: 3 | RNVC: 2
9644.250.6510: RNCC: 5 | RNVC: 2

29 Apr 2002

5340-33-102-5919
Mounting Plate

331025919
222111188: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-33-200-1080
Access Cover

332001080
7063.252.0550: RNCC: 3 | RNVC: 2
2510701236: RNCC: 5 | RNVC: 2

8 Oct 2001

5340-33-001-2964
Retaining Strap

330012964
CAN68247B: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-154-2244
Mending Plate

331542244
761021: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-107-0736
Mounting Plate

331070736
25401041-2: RNCC: 3 | RNVC: 2
PCAMI/RP/0554010412: RNCC: 6 | RNVC: 9

14 Jun 1999

5340-33-204-1978
Access Door Hinge

332041978
PCAMI/RP/27A0502040: RNCC: 3 | RNVC: 2

9 May 2005

5340-33-004-9242
Mounting Bracket

330049242
H-350-GS/D095: RNCC: 3 | RNVC: 2

22 Feb 2000

5340-33-000-7054
Retaining Band

330007054
512787: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-205-7139
Mounting Bracket

332057139
1025901798: RNCC: 3 | RNVC: 2
9742.100.0105: RNCC: 5 | RNVC: 2

1 Mar 2007

5340-33-154-6942
Angle Bracket

331546942
751835: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-33-154-7180
Bow Handle

331547180
320753: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-201-9715
Access Cover

332019715
241052505: RNCC: 3 | RNVC: 2
241052505: RNCC: 5 | RNVC: 2

29 Nov 2002

5340-33-102-5757
Mounting Bracket

331025757
324-E: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-206-1860
Angle Bracket

332061860
NN60910P01: RNCC: 3 | RNVC: 2

20 Sep 2007

5340-33-004-8946
Block Clamp

330048946
NN58367P01: RNCC: 3 | RNVC: 2

28 Jan 2000

5340-33-160-6490
Door Handle

331606490
95.513.094: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-157-9024
Mending Plate

331579024
319362: RNCC: 3 | RNVC: 2
319362: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-108-7363
Stand Base

331087363
WW 358 004 B: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-33-000-0510
Access Cover

330000510
H350GS/D021/38: RNCC: 1 | RNVC: 2

26 May 1986

5340-33-204-4950
Utility Access Door

332044950
GE12010300: RNCC: 3 | RNVC: 2

27 Sep 2005

5340-33-002-5047
Access Cover

330025047
212-13206-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-205-6118
Mounting Bracket

332056118
1025902030: RNCC: 3 | RNVC: 2
9743.100.9015: RNCC: 5 | RNVC: 2

16 Jan 2007

5340-33-003-4315
Mounting Bracket

330034315
159-819: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-33-209-4656
Utility Guard Rail Section

332094656
0663.40.7000.00: RNCC: 3 | RNVC: 2

27 Dec 2011

5340-33-204-4085
Mounting Bracket

332044085
W280698406504: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-33-203-1542
Access Cover

332031542
9673.250.7370: RNCC: 3 | RNVC: 2
2540900953: RNCC: 5 | RNVC: 2
2540900953: RNCC: 5 | RNVC: 2

6 Feb 2004

5340-33-202-6404
Mounting Plate

332026404
9673.120.0159: RNCC: 3 | RNVC: 2
2510901377: RNCC: 5 | RNVC: 2
2510901377: RNCC: 5 | RNVC: 2

18 Sep 2003

5340-33-181-1174
Mounting Plate

331811174
-25100-G9701: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-115-8171
Access Cover

331158171
10204001310: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-158-1730
Bumper

331581730
311083: RNCC: 3 | RNVC: 2
311083: RNCC: 3 | RNVC: 2
2510005677: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3440
Angle Bracket

330013440
92014674: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-108-0304
Angle Bracket

331080304
-14017-V7210: RNCC: 3 | RNVC: 2

23 Nov 2000

5340-33-000-7033
Loop Clamp

330007033
3090213849: RNCC: 1 | RNVC: 2
4730001090: RNCC: 3 | RNVC: 2
3090213849: RNCC: 3 | RNVC: 2

9 Sep 1988

5340-33-205-3551
Angle Bracket

332053551
30429-G2300: RNCC: 3 | RNVC: 2

23 Aug 2006

5340-33-003-5855
Access Door Hinge

330035855
1160571: RNCC: 3 | RNVC: 2

9 Mar 1998

5340-33-154-3835
Access Cover

331543835
665308: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-202-9182
Cushioning Pad

332029182
CBD50532P29: RNCC: 3 | RNVC: 2

28 Nov 2003

5340-33-160-0655
Clamping Catch

331600655
05.222.396.00: RNCC: 3 | RNVC: 2

21 Sep 1995

5340-33-201-7135
Access Cover

332017135
1025-901456: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-33-200-8579
Plain Solid Disk

332008579
7057.252.0101: RNCC: 3 | RNVC: 2
2510700605: RNCC: 5 | RNVC: 2

5 Apr 2002

5340-33-189-1772
Access Cover

331891772
02080000: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-205-9250
Mounting Bracket

332059250
457156: RNCC: 3 | RNVC: 2

18 May 2007

5340-33-104-7546
Webbing Strap

331047546
6720.402: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-004-5237
Access Cover

330045237
9001.141.000: RNCC: 3 | RNVC: 2

14 Jun 1999

5340-33-157-7251
Blank Panel

331577251
318343: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-116-3166
Access Cover

331163166
2615.018: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-190-3953
Mounting Bracket

331903953
1819: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-107-9057
Mounting Bracket

331079057
9DVC041200: RNCC: 3 | RNVC: 2

13 Sep 2000

5340-33-106-7742
Mounting Bracket

331067742
34791: RNCC: 3 | RNVC: 2
4350179: RNCC: 5 | RNVC: 2

15 Mar 1999

5340-33-187-5537
Loop Clamp

331875537
0201410-5: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-158-8979
Loop Clamp

331588979
-65001769-C: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-3932
Expansion Plug

330013932
92020348: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-000-7056
Retaining Band

330007056
529225: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-126-9031
Angle Bracket

331269031
25401024-3: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-33-115-5121
Corner Brace

331155121
8 280 975: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-203-2716
Mounting Bracket

332032716
9673.250.6025: RNCC: 3 | RNVC: 2
2540901566: RNCC: 5 | RNVC: 2
2540901566: RNCC: 5 | RNVC: 2

19 Feb 2004

5340-33-116-5112
Access Cover

331165112
3067504: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-8295
Mounting Bracket

331068295
W280675512001: RNCC: 3 | RNVC: 2

5 Apr 1999

5340-33-204-7518
Mounting Plate

332047518
5038126: RNCC: 3 | RNVC: 2
1.124.60.077.02-A: RNCC: 5 | RNVC: 2

5 Jan 2006

5340-33-106-8290
Access Cover

331068290
325063: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-33-125-7289
Access Cover

331257289
6.302.0.787.024.4: RNCC: 3 | RNVC: 2

14 Sep 1995

5340-33-190-3881
Loop Clamp

331903881
2272-0: RNCC: 3 | RNVC: 2

1 Aug 1995

5340-33-157-0138
Access Cover

331570138
-13264-D9702: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-157-7577
Access Cover

331577577
551790: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-158-8972
Loop Clamp

331588972
-018081: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-4479
Access Cover

330034479
721023451: RNCC: 3 | RNVC: 2

16 Sep 1997

5340-33-206-7663
Utility Resilient Mount

332067663
971200201: RNCC: 3 | RNVC: 2

11 Jun 2008

5340-33-154-0275
Butt Hinge

331540275
816067: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-33-115-8158
Access Cover

331158158
92290229728: RNCC: 3 | RNVC: 2

12 Apr 1995

5340-33-004-2825
Handle Grip

330042825
3M5O00: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-33-004-6210
Mechanical Stop

330046210
4011173942: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-116-3625
Mounting Bracket

331163625
2032.278: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-211-1185
Hook Handle

332111185
0231555: RNCC: 3 | RNVC: 2

16 Jun 2013

5340-33-126-6111
Bumper

331266111
C212334: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-5777
Mounting Bracket

332055777
CBD58504P41: RNCC: 3 | RNVC: 2

21 Dec 2006

5340-33-154-7477
Bow Handle

331547477
316865: RNCC: 3 | RNVC: 2
5340001036: RNCC: 3 | RNVC: 2
316865: RNCC: 5 | RNVC: 9

1 Oct 1990

5340-33-154-8042
Bumper

331548042
05.215.238.XX: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-33-203-8210
Mounting Bracket

332038210
40201650100: RNCC: 3 | RNVC: 2

9 Nov 2004

5340-33-201-0024
Mounting Bracket

332010024
2510901618: RNCC: 3 | RNVC: 2
2510901618: RNCC: 5 | RNVC: 2

22 Apr 2002

5340-33-000-1881
Angle Bracket

330001881
544001: RNCC: 1 | RNVC: 2
544001: RNCC: 3 | RNVC: 2

10 Dec 1986

5340-33-001-6664
Plug Button

330016664
35-15047-0101-00: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-33-108-5526
Access Cover

331085526
9644.251.7510: RNCC: 3 | RNVC: 2
2540900094: RNCC: 5 | RNVC: 2
2540900094: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-202-6704
Access Cover

332026704
5034117: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-33-200-9798
Runner

332009798
2510008641: RNCC: 3 | RNVC: 2
2510008641: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-001-3233
Bumper

330013233
92011029: RNCC: 3 | RNVC: 2

13 Nov 1989

5340-33-211-2945
Track Stop

332112945
SP08105: RNCC: 3 | RNVC: 2

12 Aug 2013

5340-33-189-1781
Access Cover

331891781
02310010: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-200-3148
Door Closer

332003148
28170103: RNCC: 3 | RNVC: 2

14 Dec 2001

5340-33-154-5670
Mending Plate

331545670
318528: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-200-8577
Mounting Bracket

332008577
7061.252.0002: RNCC: 3 | RNVC: 2
2510700414: RNCC: 5 | RNVC: 2

5 Apr 2002

5340-33-154-6546
Loop Clamp

331546546
649993: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-200-2648
Angle Bracket

332002648
100351300001: RNCC: 3 | RNVC: 2

21 Nov 2001

5340-33-200-1798
Door Holder

332001798
0287P: RNCC: 3 | RNVC: 2

29 Oct 2001

5340-33-107-9741
Mounting Bracket

331079741
9644.251.6160: RNCC: 3 | RNVC: 2
2510010251: RNCC: 5 | RNVC: 2
2510010251: RNCC: 5 | RNVC: 2

2 Nov 2000

5340-33-107-6850
Mounting Plate

331076850
20MMCH4416: RNCC: 3 | RNVC: 2

17 Apr 2000

5340-33-158-1498
Webbing Strap

331581498
619409: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-205-5212
Shimmy Damper

332055212
15.00113.01: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-33-158-1149
Mounting Bracket

331581149
010328: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-003-6531
Retaining Strap

330036531
195830: RNCC: 3 | RNVC: 2
1269338081: RNCC: 3 | RNVC: 2

27 May 1998

5340-33-201-6031
Mounting Plate

332016031
2510900073: RNCC: 3 | RNVC: 2

5 Sep 2002

5340-33-201-2508
Retaining Strap

332012508
1025-900968: RNCC: 3 | RNVC: 2

11 Jun 2002

5340-33-209-4284
Utility Access Door

332094284
PRA16124: RNCC: 3 | RNVC: 2

16 Dec 2011

5340-33-155-7782
Angle Bracket

331557782
765367: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-200-9372
Mounting Plate

332009372
9644.101.0102: RNCC: 3 | RNVC: 2
1005006554: RNCC: 5 | RNVC: 2
1005006554: RNCC: 5 | RNVC: 2

17 Apr 2002

5340-33-201-7085
Mounting Bracket

332017085
323075: RNCC: 3 | RNVC: 2

8 Oct 2002

5340-33-154-6922
Angle Bracket

331546922
312998: RNCC: 3 | RNVC: 2
312998: RNCC: 5 | RNVC: 9

1 Oct 1990

5340-33-107-0500
Access Cover

331070500
631 723 02 08: RNCC: 3 | RNVC: 2

26 May 1999

5340-33-105-0624
Mounting Plate

331050624
PCT0031: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-211-3335
Latch Bar

332113335
0505889: RNCC: 3 | RNVC: 2

24 Sep 2013

5340-33-201-4684
Block Clamp

332014684
NN60602G01: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-33-202-6694
Mounting Bracket

332026694
9673.120.0010: RNCC: 3 | RNVC: 2
2510900123: RNCC: 5 | RNVC: 2
2510900123: RNCC: 5 | RNVC: 2

24 Sep 2003

5340-33-154-6927
Angle Bracket

331546927
5340001085: RNCC: 3 | RNVC: 2
318937: RNCC: 3 | RNVC: 2
318937: RNCC: 5 | RNVC: 9

1 Oct 1990

5340-33-106-3798
Mounting Plate

331063798
Z49TUER.CHA.PAV: RNCC: 3 | RNVC: 2
CTI/VE00C29A/97 TUER-CHA FIJ.COR: RNCC: 4 | RNVC: 1
TUERCA-CHAPA FIJACION CORONA: RNCC: 6 | RNVC: 9

21 Nov 1997

5340-33-155-7508
Mending Plate

331557508
739941: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-004-8565
Angle Bracket

330048565
SP08837: RNCC: 3 | RNVC: 2

14 Dec 1999

5340-33-200-2203
Mounting Bracket

332002203
28141102: RNCC: 3 | RNVC: 2

6 Nov 2001

5340-33-200-1404
Mounting Bracket

332001404
9644.250.2130: RNCC: 3 | RNVC: 2
2510008542: RNCC: 5 | RNVC: 2
2510008542: RNCC: 5 | RNVC: 2

11 Oct 2001

5340-33-154-5543
Retaining Strap

331545543
666267: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-33-108-5654
Cushioning Pad

331085654
9644.251.6085: RNCC: 3 | RNVC: 2
9330900006: RNCC: 5 | RNVC: 2
9330900006: RNCC: 5 | RNVC: 2

16 Apr 2001

5340-33-157-7899
Angle Bracket

331577899
635119: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-33-189-2306
Butt Hinge

331892306
01310020: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-201-0227
Access Cover

332010227
2990000450: RNCC: 3 | RNVC: 2
2990000450: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-33-105-6979
Access Cover

331056979
0370027: RNCC: 3 | RNVC: 2

19 Jan 1999

5340-33-002-8136
Door Handle

330028136
0004474347: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-33-161-3193
Mechanical Stop

331613193
521200: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-116-2488
Retaining Strap

331162488
407.713-2: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-189-1779
Access Cover

331891779
02284000: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-001-0015
Mounting Bracket

330010015
35-32062-0003: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-200-9768
Runner

332009768
2510008367: RNCC: 3 | RNVC: 2
2510008367: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-181-0180
Corner Brace

331810180
-93625-C6100: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-106-5939
Mounting Plate

331065939
1413300: RNCC: 3 | RNVC: 2
1413300: RNCC: 5 | RNVC: 2

4 Sep 1998

5340-33-106-7273
Mechanical Stop

331067273
AM81010300: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-33-107-9974
Mounting Bracket

331079974
9644.251.1740: RNCC: 3 | RNVC: 2
1005006431: RNCC: 5 | RNVC: 2
1005006431: RNCC: 5 | RNVC: 2

27 Nov 2000

5340-33-001-4435
Mounting Bracket

330014435
92026321: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-108-2155
Access Cover

331082155
9644.100.0440: RNCC: 3 | RNVC: 2
1005005399: RNCC: 5 | RNVC: 2
1005005399: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-33-001-3239
Detent Plunger

330013239
92011035: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-33-004-4853
Catch Strike

330044853
203294: RNCC: 3 | RNVC: 2

2 Jun 1999

5340-33-107-7412
Mounting Bracket

331077412
W290684002200: RNCC: 3 | RNVC: 2

19 May 2000

5340-33-126-2582
Angle Bracket

331262582
8506.006: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-106-6045
Retaining Strap

331066045
2930000572: RNCC: 3 | RNVC: 2

28 Dec 1998

5340-33-106-6857
Lock-Release Lever

331066857
3PP4083-6054P001: RNCC: 3 | RNVC: 2

18 Jan 1999

5340-33-108-1394
Angle Bracket

331081394
AH0055: RNCC: 3 | RNVC: 2

16 Jan 2001

5340-33-210-9423
Mounting Bracket

332109423
RAL1000/3: RNCC: 3 | RNVC: 2

9 Apr 2013

5340-33-000-6317
Loop Clamp

330006317
795034: RNCC: 1 | RNVC: 2

14 Jun 1988

5340-33-155-7534
Mending Plate

331557534
809223: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-201-4615
Angle Bracket

332014615
J29165064-001: RNCC: 3 | RNVC: 2

26 Jul 2002

5340-33-105-1362
Mechanical Stop

331051362
CMH95200-3/8-15: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-33-116-4492
Loop Clamp

331164492
92002251141: RNCC: 3 | RNVC: 2

3 Jan 1995

5340-33-000-7500
Angle Bracket

330007500
735234: RNCC: 1 | RNVC: 2

21 Sep 1988

5340-33-181-1180
Mortise Lock Set

331811180
-90503-G9602: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-116-8285
Access Cover

331168285
22 055: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-107-5923
Mounting Bracket

331075923
116.5001.13.00: RNCC: 3 | RNVC: 2

27 Jan 2000

5340-33-004-6212
Mechanical Stop

330046212
41049: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-33-001-0087
Mounting Bracket

330010087
35-34050-0103: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-161-7013
Padlock

331617013
400/40: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-33-004-2669
Mending Plate

330042669
1055-001671: RNCC: 3 | RNVC: 2

13 Nov 1998

5340-33-001-1336
Mounting Bracket

330011336
35-53172-0002: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-33-202-3606
Split Tubular Clip

332023606
17722274: RNCC: 3 | RNVC: 2

22 Apr 2003

5340-33-180-7427
Access Cover

331807427
338499: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-206-0400
Angle Bracket

332060400
NN60957P01: RNCC: 3 | RNVC: 2

10 Jul 2007

5340-33-205-0624
Mounting Plate

332050624
0227436: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-33-157-0236
Access Cover

331570236
-24813-Y9500: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-5510
Retaining Strap

331545510
314723: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-205-2193
Mounting Bracket

332052193
1025902033: RNCC: 3 | RNVC: 2
9743.100.9017: RNCC: 5 | RNVC: 2

23 Jun 2006

5340-33-116-0328
Mending Plate

331160328
AM-12285030: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-102-2451
Runner

331022451
1005-001714: RNCC: 3 | RNVC: 2

15 Jan 1991

5340-33-000-9821
Mounting Bracket

330009821
35-22012-0201: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-157-8287
Angle Bracket

331578287
750576: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-154-5523
Retaining Strap

331545523
319753: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-33-108-0490
Mounting Bracket

331080490
0639.280.0580: RNCC: 3 | RNVC: 2
2930000210: RNCC: 5 | RNVC: 2
2930000210: RNCC: 5 | RNVC: 2

11 Dec 2000

5340-33-155-4110
Access Cover

331554110
509489: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-156-2347
Angle Bracket

331562347
-46302-C6000: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-33-203-8006
Mounting Bracket

332038006
S788020100: RNCC: 3 | RNVC: 2

27 Oct 2004

5340-33-157-8442
Angle Bracket

331578442
753648: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-160-3220
Retaining Strap

331603220
116751001: RNCC: 3 | RNVC: 9

11 Jul 1995

5340-33-155-6927
Blank Panel

331556927
755957: RNCC: 3 | RNVC: 2

18 Oct 1990

5340-33-205-5165
Pawl Fastener

332055165
MF-62-0493: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-33-002-0907
Access Cover

330020907
2510005664: RNCC: 3 | RNVC: 2
312720: RNCC: 3 | RNVC: 2

31 Oct 1992

5340-33-154-6931
Angle Bracket

331546931
534254: RNCC: 3 | RNVC: 2
534254: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-33-002-1536
Mounting Bracket

330021536
311462: RNCC: 3 | RNVC: 2

1 Jul 1993

5340-33-002-7165
Loop Clamp

330027165
0013351: RNCC: 3 | RNVC: 2
NG0013351: RNCC: 3 | RNVC: 2

26 Jul 1995

5340-33-126-4342
Mounting Bracket

331264342
C22136-N1000-C1: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-202-7081
Mounting Bracket

332027081
9673.250.6740: RNCC: 3 | RNVC: 2
2540900861: RNCC: 5 | RNVC: 2
2540900861: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-33-202-0239
Mending Plate

332020239
000019005900: RNCC: 3 | RNVC: 2

17 Dec 2002

5340-33-000-7023
Loop Clamp

330007023
3090202549: RNCC: 1 | RNVC: 2

9 Sep 1988

5340-33-200-9687
Lock-Release Lever

332009687
1005006239: RNCC: 3 | RNVC: 2
1005006239: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-33-105-9670
Door Hook

331059670
1.120.18.03.003: RNCC: 3 | RNVC: 2

21 Sep 1996

5340-33-200-5952
Mechanical Stop

332005952
WW 493 369 A: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-33-001-1069
Mounting Bracket

330011069
35-46748-0102: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-102-2404
Mending Plate

331022404
1005-000949: RNCC: 3 | RNVC: 2
WK-W 9033.0113: RNCC: 5 | RNVC: 2

15 Jan 1991

5340-33-204-8006
Mounting Plate

332048006
PS-910917: RNCC: 3 | RNVC: 2

26 Jan 2006

5340-33-104-6649
Mounting Bracket

331046649
1005-002014: RNCC: 3 | RNVC: 2

3 Feb 1997

5340-33-106-5277
Furniture Cup

331065277
C0501060: RNCC: 3 | RNVC: 2
PCAMI/RP/31C0501060: RNCC: 4 | RNVC: 1
050106: RNCC: 5 | RNVC: 1

6 Apr 1998

5340-33-106-5360
Rod Retainer Clip

331065360
C0301130: RNCC: 3 | RNVC: 2
PCAMI/RP/29C0301130: RNCC: 4 | RNVC: 1
030113: RNCC: 5 | RNVC: 1

13 Apr 1998

5340-33-002-5023
Door Hook And Eye

330025023
212-21126-37-1: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-33-154-0465
Expansion Plug

331540465
3340803071: RNCC: 3 | RNVC: 2

29 Jan 1990

5340-33-004-9234
Crank Handle

330049234
5010260414: RNCC: 2 | RNVC: 2

22 Feb 2000

5340-33-190-5285
Access Cover

331905285
JC1: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-33-106-7749
Mounting Bracket

331067749
59925-C: RNCC: 3 | RNVC: 2
3350013: RNCC: 5 | RNVC: 2

15 Mar 1999

5340-33-188-9824
Rod End Clevis

331889824
3 170 392: RNCC: 3 | RNVC: 2

25 Sep 1995

5340-33-205-3565
Mounting Plate

332053565
5033908: RNCC: 3 | RNVC: 2
1.128.72.100: RNCC: 5 | RNVC: 2

24 Aug 2006

5340-33-204-3113
Retaining Strap

332043113
706200015: RNCC: 3 | RNVC: 2

30 Jun 2005

5340-33-114-4829
Mounting Bracket

331144829
10ILA 1-38: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-114-5067
Mounting Bracket

331145067
5TG 5-1: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-33-156-4630
Strap Hinge

331564630
-90811-G9501: RNCC: 3 | RNVC: 2
90811-G9501: RNCC: 6 | RNVC: 9

11 Jul 1995

5340-33-205-3461
Access Cover

332053461
CGD-11200101-01: RNCC: 3 | RNVC: 2

18 Aug 2006

5340-33-161-2078
Mounting Bracket

331612078
2530-000263: RNCC: 3 | RNVC: 2

3 Jan 1995

5340-33-202-9847
Mounting Plate

332029847
223551A02-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-201-2153
Mounting Bracket

332012153
722432710-01: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-33-103-2426
Mounting Bracket

331032426
1055-000337: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-33-001-6205
Hinged Hasp

330016205
TL-100-A: RNCC: 3 | RNVC: 2

15 Nov 1989

5340-33-206-2492
Spring Holder

332062492
XX-421200001500: RNCC: 3 | RNVC: 2
421200001500: RNCC: 5 | RNVC: 2

10 Oct 2007

5340-33-200-4498
Access Cover

332004498
WW 435 976: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-33-107-8764
Mounting Plate

331078764
7054.252.0005: RNCC: 3 | RNVC: 2
2510700836: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-33-155-7527
Mending Plate

331557527
633965: RNCC: 3 | RNVC: 2
633965: RNCC: 5 | RNVC: 2

18 Oct 1990

5340-33-107-4479
Mounting Bracket

331074479
W280677501002: RNCC: 3 | RNVC: 2

13 Oct 1999

5340-33-154-2240
Mending Plate

331542240
695251: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-33-206-0991
Mounting Bracket

332060991
981156: RNCC: 3 | RNVC: 2

6 Aug 2007

5340-33-106-2024
Pipe Hanger

331062024
-11902226-0: RNCC: 3 | RNVC: 2

24 Oct 1997

5340-33-203-2101
Bridge Clamp

332032101
2540901641: RNCC: 3 | RNVC: 2
2540901641: RNCC: 5 | RNVC: 2

16 Feb 2004

5340-33-155-9302
Expansion Plug

331559302
312697: RNCC: 3 | RNVC: 2
312697: RNCC: 5 | RNVC: 9

4 Jan 1991

5340-33-001-1046
Mounting Bracket

330011046
35-46730-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-201-4798
Mending Plate

332014798
J92666151-001: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-33-001-0796
Mounting Bracket

330010796
35-46433-0001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-33-209-2025
Utility Access Door

332092025
R0098317: RNCC: 3 | RNVC: 2
1270000396: RNCC: 5 | RNVC: 2
R0098317-0103: RNCC: 5 | RNVC: 2

19 Jul 2011

5340-33-106-8076
Loop Clamp

331068076
RAL-200-10-6: RNCC: 3 | RNVC: 2

31 Mar 1999

5340-33-001-9164
Expansion Shield

330019164
C-20050-9-0-I-04-11: RNCC: 3 | RNVC: 2

8 May 1991

5340-33-201-4062
Retaining Strap

332014062
A2810546-001: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-33-205-5658
Bow Handle

332055658
ULM 6927-2-132: RNCC: 3 | RNVC: 2

19 Dec 2006

5340-33-202-9860
Mounting Plate

332029860
223551803-01: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-33-201-9839
Mounting Plate

332019839
223591314-01: RNCC: 3 | RNVC: 2

5 Dec 2002

5340-33-003-2938
Strap Fastener Loop

330032938
721023651: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-33-154-5540
Retaining Strap

331545540
615992: RNCC: 3 | RNVC: 2

3 Dec 1990

Load More Results